ext4: no need to generate from free list in mballoc

commit ebf6cb7c6e1241984f75f29f1bdbfa2fe7168f88 upstream.

Commit 7a2fcbf7f85 ("ext4: don't use blocks freed but not yet committed in
buddy cache init") added a code to mark as used blocks in the list of not yet
committed freed blocks during initialization of a buddy page. However
ext4_mb_free_metadata() makes sure buddy page is already loaded and takes a
reference to it so it cannot happen that ext4_mb_init_cache() is called
when efd list is non-empty. Just remove the
ext4_mb_generate_from_freelist() call.

Fixes: 7a2fcbf7f85('ext4: don't use blocks freed but not yet committed in buddy cache init')
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_53CBCB1668358AE862684E453DF37B722008@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix race between writepages and remount

commit 745f17a4166e79315e4b7f33ce89d03e75a76983 upstream.

We got a WARNING in ext4_add_complete_io:
==================================================================
 WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250
 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85
 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4]
 [...]
 Call Trace:
  <TASK>
  ext4_end_bio+0xa8/0x240 [ext4]
  bio_endio+0x195/0x310
  blk_update_request+0x184/0x770
  scsi_end_request+0x2f/0x240
  scsi_io_completion+0x75/0x450
  scsi_finish_command+0xef/0x160
  scsi_complete+0xa3/0x180
  blk_complete_reqs+0x60/0x80
  blk_done_softirq+0x25/0x40
  __do_softirq+0x119/0x4c8
  run_ksoftirqd+0x42/0x70
  smpboot_thread_fn+0x136/0x3c0
  kthread+0x140/0x1a0
  ret_from_fork+0x2c/0x50
==================================================================

Above issue may happen as follows:

            cpu1                        cpu2
----------------------------|----------------------------
mount -o dioread_lock
ext4_writepages
 ext4_do_writepages
  *if (ext4_should_dioread_nolock(inode))*
    // rsv_blocks is not assigned here
                                 mount -o remount,dioread_nolock
  ext4_journal_start_with_reserve
   __ext4_journal_start
    __ext4_journal_start_sb
     jbd2__journal_start
      *if (rsv_blocks)*
        // h_rsv_handle is not initialized here
  mpage_map_and_submit_extent
    mpage_map_one_extent
      dioread_nolock = ext4_should_dioread_nolock(inode)
      if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN))
        mpd->io_submit.io_end->handle = handle->h_rsv_handle
        ext4_set_io_unwritten_flag
          io_end->flag |= EXT4_IO_END_UNWRITTEN
      // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag

scsi_finish_command
 scsi_io_completion
  scsi_io_completion_action
   scsi_end_request
    blk_update_request
     req_bio_endio
      bio_endio
       bio->bi_end_io  > ext4_end_bio
        ext4_put_io_end_defer
 ext4_add_complete_io
  // trigger WARN_ON(!io_end->handle && sbi->s_journal);

The immediate cause of this problem is that ext4_should_dioread_nolock()
function returns inconsistent values in the ext4_do_writepages() and
mpage_map_one_extent(). There are four conditions in this function that
can be changed at mount time to cause this problem. These four conditions
can be divided into two categories:

    (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl
    (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount

The two in the first category have been fixed by commit c8585c6fcaf2
("ext4: fix races between changing inode journal mode and ext4_writepages")
and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling
EXT4_EXTENTS_FL") respectively.

Two cases in the other category have not yet been fixed, and the above
issue is caused by this situation. We refer to the fix for the first
category, when applying options during remount, we grab s_writepages_rwsem
to avoid racing with writepages ops to trigger this problem.

Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"

commit 6a26310273c323380da21eb23fcfd50e31140913 upstream.

This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df.

I couldn't reproduce the reported issue. What I did, based on a pcap
packet log provided by the reporter:
- Used same chip version (RTL8168h)
- Set MAC address to the one used on the reporters system
- Replayed the EAPOL unicast packet that, according to the reporter,
  was filtered out by the mc filter.
The packet was properly received.

Therefore the root cause of the reported issue seems to be somewhere
else. Disabling mc filtering completely for the most common chip
version is a quite big hammer. Therefore revert the change and wait
for further analysis results from the reporter.

Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"

commit 5b4ffb176d7979ac66b349addf3f7de433335e00 upstream.

This reverts commit 9d1bd9346241cd6963b58da7ffb7ed303285f684.

Multiple people reported misbehaving devices and reverting this commit fixes
the problem for them. As soon as the original commit author starts reacting
again, we can try to figure out why he hasn't seen the issues (mismatching
report descriptors?), but for the time being, fix for 6.7 by reverting.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix csid-gen2 for test pattern generator

commit 87889f1b7ea40d2544b49c62092e6ef2792dced7 upstream.

In the current driver csid Test Pattern Generator (TPG) doesn't work.
This change:
- fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0
- fixes the shift by one between test_pattern control value and the
  actual pattern.
- drops fixed VC of 0x0a which testing showed prohibited some test
  patterns in the CSID to produce output.
So that TPG starts working, but with the below limitations:
- only test_pattern=9 works as it should
- test_pattern=8 and test_pattern=7 produce black frame (all zeroes)
- the rest of test_pattern's don't work (yavta doesn't get the data)
- regardless of the CFA pattern set by 'media-ctl -V' the actual pixel
  order is always the same (RGGB for any RAW8 or RAW10P format in
  4608x2592 resolution).

Tested with:

RAW10P format, VC0:
 media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0

RAW10P format, VC1:
 media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1

RAW8 format, VC0:
 media-ctl --reset
 media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix invalid clock enable bit disjunction

commit d8f7e1a60d01739a1d78db2b08603089c6cf7c8e upstream.

define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)

disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
either way.

Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3

commit e655d1ae9703286cef7fda8675cad62f649dc183 upstream.

VC_MODE = 0 implies a two bit VC address.
VC_MODE = 1 is required for VCs with a larger address than two bits.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix missing vfe_lite clocks check

commit b6e1bdca463a932c1ac02caa7d3e14bf39288e0c upstream.

check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix VFE-480 vfe_disable_output()

commit 7f24d291350426d40b36dfbe6b3090617cdfd37a upstream.

vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.

Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.

Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix VFE-17x vfe_disable_output()

commit 3143ad282fc08bf995ee73e32a9e40c527bf265d upstream.

There are two problems with the current vfe_disable_output() routine.

Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.

Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.

Rewrite the vfe_disable_output() routine to

- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0

remembering to hold the spinlock when we do so followed by

- Reset the VFE

Testing on sc8280xp and sdm845 shows this to be a valid fix.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix vfe_get() error jump

commit 26bda3da00c3edef727a6acb00ed2eb4b22f8723 upstream.

Right now it is possible to do a vfe_get() with the internal reference
count at 1. If vfe_check_clock_rates() returns non-zero then we will
leave the reference count as-is and

run:
- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()

skip:
- camss_disable_clocks()

Subsequent vfe_put() calls will when the ref-count is non-zero
unconditionally run:

- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()
- camss_disable_clocks()

vfe_get() should not attempt to roll-back on error when the ref-count is
non-zero as the upper layers will still do their own vfe_put() operations.

vfe_put() will drop the reference count and do the necessary power
domain release, the cleanup jumps in vfe_get() should only be run when
the ref-count is zero.

[   50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80
[   50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023
[   50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   50.095802] pc : refcount_warn_saturate+0xf4/0x148
[   50.095804] lr : refcount_warn_saturate+0xf4/0x148
[   50.095805] sp : ffff80000c7cb8b0
[   50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000
[   50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000
[   50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005
[   50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff
[   50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320
[   50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520
[   50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954
[   50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[   50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000
[   50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040
[   50.095835] Call trace:
[   50.095836]  refcount_warn_saturate+0xf4/0x148
[   50.095838]  device_link_put_kref+0x84/0xc8
[   50.095843]  device_link_del+0x38/0x58
[   50.095846]  vfe_pm_domain_off+0x3c/0x50 [qcom_camss]
[   50.095860]  vfe_put+0x114/0x140 [qcom_camss]
[   50.095869]  csid_set_power+0x2c8/0x408 [qcom_camss]
[   50.095878]  pipeline_pm_power_one+0x164/0x170 [videodev]
[   50.095896]  pipeline_pm_power+0xc4/0x110 [videodev]
[   50.095909]  v4l2_pipeline_pm_use+0x5c/0xa0 [videodev]
[   50.095923]  v4l2_pipeline_pm_get+0x1c/0x30 [videodev]
[   50.095937]  video_open+0x7c/0x100 [qcom_camss]
[   50.095945]  v4l2_open+0x84/0x130 [videodev]
[   50.095960]  chrdev_open+0xc8/0x250
[   50.095964]  do_dentry_open+0x1bc/0x498
[   50.095966]  vfs_open+0x34/0x40
[   50.095968]  path_openat+0xb44/0xf20
[   50.095971]  do_filp_open+0xa4/0x160
[   50.095974]  do_sys_openat2+0xc8/0x188
[   50.095975]  __arm64_sys_openat+0x6c/0xb8
[   50.095977]  invoke_syscall+0x50/0x128
[   50.095982]  el0_svc_common.constprop.0+0x4c/0x100
[   50.095985]  do_el0_svc+0x40/0xa8
[   50.095988]  el0_svc+0x2c/0x88
[   50.095991]  el0t_64_sync_handler+0xf4/0x120
[   50.095994]  el0t_64_sync+0x190/0x198
[   50.095996] ---[ end trace 0000000000000000 ]---

Fixes: 779096916dae ("media: camss: vfe: Fix runtime PM imbalance on error")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix pm_domain_on sequence in probe

commit 7405116519ad70b8c7340359bfac8db8279e7ce4 upstream.

We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().

Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.

In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.

Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER

commit 015c9cbcf0ad709079117d27c2094a46e0eadcdb upstream.

Due to a flaw in the hardware design, the GL9750 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9750
PCI config. Therefore, the replay timer timeout must be masked.

Fixes: d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: add handling DASH when DASH is disabled

commit 0ab0c45d8aaea5192328bfa6989673aceafc767c upstream.

For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.

This patch also prepares for "fix network lost after resume on DASH
systems".

Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix network lost after resume on DASH systems

commit 868c3b95afef4883bfb66c9397482da6840b5baf upstream.

Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.

Fixes: b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: fix fastclose with csum failure

commit 7cefbe5e1dacc7236caa77e9d072423f21422fe2 upstream.

Running the mp_join selftest manually with the following command line:

  ./mptcp_join.sh -z -C

leads to some failures:

  002 fastclose server test
  # ...
  rtx                                 [fail] got 1 MP_RST[s] TX expected 0
  # ...
  rstrx                               [fail] got 1 MP_RST[s] RX expected 0

The problem is really in the wrong expectations for the RST checks
implied by the csum validation. Note that the same check is repeated
explicitly in the same test-case, with the correct expectation and
pass successfully.

Address the issue explicitly setting the correct expectation for
the failing checks.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix setsockopt(IP_TOS) subflow locking

commit 7679d34f97b7a09fd565f5729f79fd61b7c55329 upstream.

The MPTCP implementation of the IP_TOS socket option uses the lockless
variant of the TOS manipulation helper and does not hold such lock at
the helper invocation time.

Add the required locking.

Fixes: ffcacff87cd6 ("mptcp: Support for IP_TOS for MPTCP setsockopt()")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: add validity check for sending RM_ADDR

commit 8df220b29282e8b450ea57be62e1eccd4996837c upstream.

This patch adds the validity check for sending RM_ADDRs for userspace PM
in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the
anno_list or conn_list.

Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: deal with large GSO size

commit 9fce92f050f448a0d1ddd9083ef967d9930f1e52 upstream.

After the blamed commit below, the TCP sockets (and the MPTCP subflows)
can build egress packets larger than 64K. That exceeds the maximum DSS
data size, the length being misrepresent on the wire and the stream being
corrupted, as later observed on the receiver:

  WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0
  CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
  netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
  RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705
  RSP: 0018:ffffc90000006e80 EFLAGS: 00010246
  RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000
  netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
  RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908
  RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a
  R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908
  R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29
  FS:  00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
  PKRU: 55555554
  Call Trace:
   <IRQ>
   mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819
   subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409
   tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151
   tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098
   tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483
   tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749
   ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438
   ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483
   ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304
   __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532
   process_backlog+0x353/0x660 net/core/dev.c:5974
   __napi_poll+0xc6/0x5a0 net/core/dev.c:6536
   net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603
   __do_softirq+0x184/0x524 kernel/softirq.c:553
   do_softirq+0xdd/0x130 kernel/softirq.c:454

Address the issue explicitly bounding the maximum GSO size to what MPTCP
actually allows.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/450
Fixes: 7c4e983c4f3c ("net: allow gso_max_size to exceed 65536")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors

commit 24948e3b7b12e0031a6edb4f49bbb9fb2ad1e4e9 upstream.

Objcg vectors attached to slab pages to store slab object ownership
information are allocated using gfp flags for the original slab
allocation.  Depending on slab page order and the size of slab objects,
objcg vector can take several pages.

If the original allocation was done with the __GFP_NOFAIL flag, it
triggered a warning in the page allocation code.  Indeed, order > 1 pages
should not been allocated with the __GFP_NOFAIL flag.

Fix this by simply dropping the __GFP_NOFAIL flag when allocating the
objcg vector.  It effectively allows to skip the accounting of a single
slab object under a heavy memory pressure.

An alternative would be to implement the mechanism to fallback to order-0
allocations for accounting metadata, which is also not perfect because it
will increase performance penalty and memory footprint of the kernel
memory accounting under memory pressure.

Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Christoph Lameter <cl@linux.com>
Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix for negative counter: nr_file_hugepages

commit a48d5bdc877b85201e42cef9c2fdf5378164c23a upstream.

While qualifiying the 6.4 release, the following warning was detected in
messages:

vmstat_refresh: nr_file_hugepages -15664

The warning is caused by the incorrect updating of the NR_FILE_THPS
counter in the function split_huge_page_to_list.  The if case is checking
for folio_test_swapbacked, but the else case is missing the check for
folio_test_pmd_mappable.  The other functions that manipulate the counter
like __filemap_add_folio and filemap_unaccount_folio have the
corresponding check.

I have a test case, which reproduces the problem. It can be found here:
  https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c

The test case reproduces on an XFS filesystem. Running the same test
case on a BTRFS filesystem does not reproduce the problem.

AFAIK version 6.1 until 6.6 are affected by this problem.

[akpm@linux-foundation.org: whitespace fix]
[shr@devkernel.io: test for folio_test_pmd_mappable()]
Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Co-debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2

commit d7133797e9e1b72fd89237f68cb36d745599ed86 upstream.

When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not
enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter
ASPM L1.2.

Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20230912091710.7797-1-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: kprobes: allow writing to x0

commit 8cb22bec142624d21bc85ff96b7bad10b6220e6a upstream.

Instructions can write to x0, so we should simulate these instructions
normally.

Currently, the kernel hangs if an instruction who writes to x0 is
simulated.

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: correct pt_level name via pgtable_l5/4_enabled

commit e59e5e2754bf983fc58ad18f99b5eec01f1a0745 upstream.

The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names.
But if page mode is downgraded from kernel cmdline or restricted by
the hardware in 64BIT, it will give a wrong name.

Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD"
that should be "PGD":

0xffffffd840000000-0xffffffd900000000    0x00000000c0000000         3G PUD     D A G . . W R V

So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it.

Fixes: e8a62cc26ddf ("riscv: Implement sv48 support")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230712115740.943324-1-suagrfillet@gmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230830044129.11481-3-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Update the comment of CONFIG_PAGE_OFFSET

commit 559fe94a449cba5b50a7cffea60474b385598c00 upstream.

Since the commit 011f09d12052 set sv57 as default for CONFIG_64BIT,
the comment of CONFIG_PAGE_OFFSET should be updated too.

Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly")
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: put interrupt entries into .irqentry.text

commit 87615e95f6f9ccd36d4a3905a2d87f91967ea9d2 upstream.

The interrupt entries are expected to be in the .irqentry.text section.
For example, for kprobes to work properly, exception code cannot be
probed; this is ensured by blacklisting addresses in the .irqentry.text
section.

Fixes: 7db91e57a0ac ("RISC-V: Task implementation")
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230821145708.21270-1-namcaov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause

commit dd16ac404a685cce07e67261a94c6225d90ea7ba upstream.

Actually it is a part of Conor's
commit aae538cd03bc ("riscv: fix detection of toolchain
Zihintpause support").
It is looks like a merge issue. Samuel's
commit 0b1d60d6dd9e ("riscv: Fix build with
CONFIG_CC_OPTIMIZE_FOR_SIZE=y") do not base on Conor's commit and
revert to __riscv_zihintpause. So this patch can fix it.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Fixes: 3c349eacc559 ("Merge patch "riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y"")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802064215.31111-1-minda.chen@starfivetech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC

commit 53c87e846e335e3c18044c397cc35178163d7827 upstream.

Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer.

Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/104a8c8fedffd1ff8a2890983e2ec1c26bff6810.camel@linux.ibm.com/
Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

swiotlb: do not free decrypted pages if dynamic

commit a5e3b127455d073f146a2a4ea3e7117635d34c5c upstream.

Fix these two error paths:

1. When set_memory_decrypted() fails, pages may be left fully or partially
   decrypted.

2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
   physical address is too high.

To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.

To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.

Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).

Cc: stable@vger.kernel.org
Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: fprobe-event: Fix to check tracepoint event and return

commit ce51e6153f7781bcde0f8bb4c81d6fd85ee422e6 upstream.

Fix to check the tracepoint event is not valid with $retval.
The commit 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is
a return event by $retval") introduced automatic return probe
conversion with $retval. But since tracepoint event does not
support return probe, $retval is not acceptable.

Without this fix, ftracetest, tprobe_syntax_errors.tc fails;

[22] Tracepoint probe event parser error log check      [FAIL]
 ----
 # tail 22-tprobe_syntax_errors.tc-log.mRKroL
 + ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events
 + printf %s t kfree
 + wc -c
 + pos=8
 + printf %s t kfree ^$retval
 + tr -d ^
 + command=t kfree $retval
 + echo Test command: t kfree $retval
 Test command: t kfree $retval
 + echo
 ----

So 't kfree $retval' should fail (tracepoint doesn't support
return probe) but passed it.

Link: https://lore.kernel.org/all/169944555933.45057.12831706585287704173.stgit@devnote2/
Fixes: 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: Mark __percpu functions as always inline

commit 71945968d8b128c955204baa33ec03bdd91bdc26 upstream.

A recent change to the optimization pipeline in LLVM reveals some
fragility around the inlining of LoongArch's __percpu functions, which
manifests as a BUILD_BUG() failure:

  In file included from kernel/sched/build_policy.c:17:
  In file included from include/linux/sched/cputime.h:5:
  In file included from include/linux/sched/signal.h:5:
  In file included from include/linux/rculist.h:11:
  In file included from include/linux/rcupdate.h:26:
  In file included from include/linux/irqflags.h:18:
  arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed
     97 |                 BUILD_BUG();
        |                 ^
  include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG'
     59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
        |                     ^
  include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
     39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
        |                                     ^
  include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert'
    425 |         _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |         ^
  include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert'
    413 |         __compiletime_assert(condition, msg, prefix, suffix)
        |         ^
  include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert'
    406 |                         prefix ## suffix();                             \
        |                         ^
  <scratch space>:86:1: note: expanded from here
     86 | __compiletime_assert_51
        | ^
  1 error generated.

If these functions are not inlined (which the compiler is free to do
even with functions marked with the standard 'inline' keyword), the
BUILD_BUG() in the default case cannot be eliminated since the compiler
cannot prove it is never used, resulting in a build failure due to the
error attribute.

Mark these functions as __always_inline to guarantee inlining so that
the BUILD_BUG() only triggers when the default case genuinely cannot be
eliminated due to an unexpected size.

Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1955
Fixes: 46859ac8af52 ("LoongArch: Add multi-processor (SMP) support")
Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Update nfsd_cache_append() to use xdr_stream

commit 49cecd8628a9855cd993792a0377559ea32d5e7c upstream.

When inserting a DRC-cached response into the reply buffer, ensure
that the reply buffer's xdr_stream is updated properly. Otherwise
the server will send a garbage response.

Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix file memleak on client_opens_release

commit bc1b5acb40201a0746d68a7d7cfc141899937f4f upstream.

seq_release should be called to free the allocated seq_file

Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens")
Reviewed-by: NeilBrown <neilb@suse.de>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-verity: don't use blocking calls from tasklets

commit 28f07f2ab4b3a2714f1fefcc58ada4bcc195f806 upstream.

The commit 5721d4e5a9cd enhanced dm-verity, so that it can verify blocks
from tasklets rather than from workqueues. This reportedly improves
performance significantly.

However, dm-verity was using the flag CRYPTO_TFM_REQ_MAY_SLEEP from
tasklets which resulted in warnings about sleeping function being called
from non-sleeping context.

BUG: sleeping function called from invalid context at crypto/internal.h:206
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
preempt_count: 100, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 14 Comm: ksoftirqd/0 Tainted: G        W 6.7.0-rc1 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x32/0x50
 __might_resched+0x110/0x160
 crypto_hash_walk_done+0x54/0xb0
 shash_ahash_update+0x51/0x60
 verity_hash_update.isra.0+0x4a/0x130 [dm_verity]
 verity_verify_io+0x165/0x550 [dm_verity]
 ? free_unref_page+0xdf/0x170
 ? psi_group_change+0x113/0x390
 verity_tasklet+0xd/0x70 [dm_verity]
 tasklet_action_common.isra.0+0xb3/0xc0
 __do_softirq+0xaf/0x1ec
 ? smpboot_thread_fn+0x1d/0x200
 ? sort_range+0x20/0x20
 run_ksoftirqd+0x15/0x30
 smpboot_thread_fn+0xed/0x200
 kthread+0xdc/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x28/0x40
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork_asm+0x11/0x20
 </TASK>

This commit fixes dm-verity so that it doesn't use the flags
CRYPTO_TFM_REQ_MAY_SLEEP and CRYPTO_TFM_REQ_MAY_BACKLOG from tasklets. The
crypto API would do GFP_ATOMIC allocation instead, it could return -ENOMEM
and we catch -ENOMEM in verity_tasklet and requeue the request to the
workqueue.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.0+
Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-bufio: fix no-sleep mode

commit 2a695062a5a42aead8c539a344168d4806b3fda2 upstream.

dm-bufio has a no-sleep mode. When activated (with the
DM_BUFIO_CLIENT_NO_SLEEP flag), the bufio client is read-only and we
could call dm_bufio_get from tasklets. This is used by dm-verity.

Unfortunately, commit 450e8dee51aa ("dm bufio: improve concurrent IO
performance") broke this and the kernel would warn that cache_get()
was calling down_read() from no-sleeping context. The bug can be
reproduced by using "veritysetup open" with the "--use-tasklets"
flag.

This commit fixes dm-bufio, so that the tasklet mode works again, by
expanding use of the 'no_sleep_enabled' static_key to conditionally
use either a rw_semaphore or rwlock_t (which are colocated in the
buffer_tree structure using a union).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.4
Fixes: 450e8dee51aa ("dm bufio: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek/dp: fix memory leak on ->get_edid callback error path

commit fcaf9761fd5884a64eaac48536f8c27ecfd2e6bc upstream.

Setting new_edid to NULL leaks the buffer.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Guillaume Ranquet <granquet@baylibre.com>
Cc: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914131058.2472260-1-jani.nikula@intel.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection

commit dab12fa8d2bd3868cf2de485ed15a3feef28a13d upstream.

The sads returned by drm_edid_to_sad() needs to be freed.

Fixes: e71a8ebbe086 ("drm/mediatek: dp: Audio support for MT8195")
Cc: Guillaume Ranquet <granquet@baylibre.com>
Cc: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914155317.2511876-1-jani.nikula@intel.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ccs: Correctly initialise try compose rectangle

commit 724ff68e968b19d786870d333f9952bdd6b119cb upstream.

Initialise the try sink compose rectangle size to the sink compose
rectangle for binner and scaler sub-devices. This was missed due to the
faulty condition that lead to the compose rectangles to be initialised for
the pixel array sub-device where it is not relevant.

Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi: add checks to handle capabilities from firmware

commit 8d0b89398b7ebc52103e055bf36b60b045f5258f upstream.

The hfi parser, parses the capabilities received from venus firmware and
copies them to core capabilities. Consider below api, for example,
fill_caps - In this api, caps in core structure gets updated with the
number of capabilities received in firmware data payload. If the same api
is called multiple times, there is a possibility of copying beyond the max
allocated size in core caps.
Similar possibilities in fill_raw_fmts and fill_profile_level functions.

Cc: stable@vger.kernel.org
Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi: fix the check to handle session buffer requirement

commit b18e36dfd6c935da60a971310374f3dfec3c82e1 upstream.

Buffer requirement, for different buffer type, comes from video firmware.
While copying these requirements, there is an OOB possibility when the
payload from firmware is more than expected size. Fix the check to avoid
the OOB possibility.

Cc: stable@vger.kernel.org
Fixes: 09c2845e8fe4 ("[media] media: venus: hfi: add Host Firmware Interface (HFI)")
Reviewed-by: Nathan Hebert <nhebert@chromium.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi_parser: Add check to keep the number of codecs within range

commit 0768a9dd809ef52440b5df7dce5a1c1c7e97abbd upstream.

Supported codec bitmask is populated from the payload from venus firmware.
There is a possible case when all the bits in the codec bitmask is set. In
such case, core cap for decoder is filled  and MAX_CODEC_NUM is utilized.
Now while filling the caps for encoder, it can lead to access the caps
array beyong 32 index. Hence leading to OOB write.
The fix counts the supported encoder and decoder. If the count is more than
max, then it skips accessing the caps.

Cc: stable@vger.kernel.org
Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: sharp: fix sharp encoding

commit 4f7efc71891462ab7606da7039f480d7c1584a13 upstream.

The Sharp protocol[1] encoding has incorrect timings for bit space.

[1] https://www.sbprojects.net/knowledge/ir/sharp.php

Fixes: d35afc5fe097 ("[media] rc: ir-sharp-decoder: Add encode capability")
Cc: stable@vger.kernel.org
Reported-by: Joe Ferner <joe.m.ferner@gmail.com>
Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: lirc: drop trailing space from scancode transmit

commit c8a489f820179fb12251e262b50303c29de991ac upstream.

When transmitting, infrared drivers expect an odd number of samples; iow
without a trailing space. No problems have been observed so far, so
this is just belt and braces.

Fixes: 9b6192589be7 ("media: lirc: implement scancode sending")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: split initial and dynamic conditions for extent_cache

commit f803982190f0265fd36cf84670aa6daefc2b0768 upstream.

Let's allocate the extent_cache tree without dynamic conditions to avoid a
missing condition causing a panic as below.

 # create a file w/ a compressed flag
 # disable the compression
 # panic while updating extent_cache

F2FS-fs (dm-64): Swapfile: last extent is not aligned to section
F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N)
Adding 124996k swap on ./swap-file.  Priority:0 extents:2 across:17179494468k
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
Write of size 4 at addr 0000000000000030 by task syz-executor154/3327

CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G           O      5.10.185 #1
Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023
Call Trace:
 __dump_stack out/common/lib/dump_stack.c:77 [inline]
 dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118
 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415
 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428
 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186
 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37
 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
 atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
 queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
 __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
 _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155
 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172
 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline]
 f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764
 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310
 ksys_fallocate out/common/fs/open.c:333 [inline]
 __do_sys_fallocate out/common/fs/open.c:341 [inline]
 __se_sys_fallocate out/common/fs/open.c:339 [inline]
 __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339
 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46

Cc: stable@vger.kernel.org
Fixes: 72840cccc0a1 ("f2fs: allocate the extent_cache by default")
Reported-and-tested-by: syzbot+d342e330a37b48c094b7@syzkaller.appspotmail.com
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: avoid format-overflow warning

commit e0d4e8acb3789c5a8651061fbab62ca24a45c063 upstream.

With gcc and W=1 option, there's a warning like this:

fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’:
fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between
1 and 7 bytes into a region of size between 5 and 8
[-Werror=format-overflow=]
 1984 |  sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev),
MINOR(dev));
      |                                               ^~

String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up
to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35".
slab_name's size should be 35 rather than 32.

Cc: stable@vger.kernel.org
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: set the default compress_level on ioctl

commit f5f3bd903a5d3e3b2ba89f11e0e29db25e60c048 upstream.

Otherwise, we'll get a broken inode.

 # touch $FILE
 # f2fs_io setflags compression $FILE
 # f2fs_io set_coption 2 8 $FILE

[  112.227612] F2FS-fs (dm-51): sanity_check_compress_inode: inode (ino=8d3fe) has unsupported compress level: 0, run fsck to fix

Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: do not return EFSCORRUPTED, but try to run online repair

commit 50a472bbc79ff9d5a88be8019a60e936cadf9f13 upstream.

If we return the error, there's no way to recover the status as of now, since
fsck does not fix the xattr boundary issue.

Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i801: fix potential race in i801_block_transaction_byte_by_byte

commit f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream.

Currently we set SMBHSTCNT_LAST_BYTE only after the host has started
receiving the last byte. If we get e.g. preempted before setting
SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte
before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing
SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code
is also consistent with what we do in i801_isr_byte_done().

Reported-by: Jean Delvare <jdelvare@suse.com>
Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/
Cc: stable@vger.kernel.org
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: don't withdraw if init_threads() got interrupted

commit 0cdc6f44e9fdc2d20d720145bf99a39f611f6d61 upstream.

In gfs2_fill_super(), when mounting a gfs2 filesystem is interrupted,
kthread_create() can return -EINTR.  When that happens, we roll back
what has already been done and abort the mount.

Since commit 62dd0f98a0e5 ("gfs2: Flag a withdraw if init_threads()
fails), we are calling gfs2_withdraw_delayed() in gfs2_fill_super();
first via gfs2_make_fs_rw(), then directly.  But gfs2_withdraw_delayed()
only marks the filesystem as withdrawing and relies on a caller further
up the stack to do the actual withdraw, which doesn't exist in the
gfs2_fill_super() case.  Because the filesystem is marked as withdrawing
/ withdrawn, function gfs2_lm_unmount() doesn't release the dlm
lockspace, so when we try to mount that filesystem again, we get:

    gfs2: fsid=gohan:gohan0: Trying to join cluster "lock_dlm", "gohan:gohan0"
    gfs2: fsid=gohan:gohan0: dlm_new_lockspace error -17

Since commit b77b4a4815a9 ("gfs2: Rework freeze / thaw logic"), the
deadlock this gfs2_withdraw_delayed() call was supposed to work around
cannot occur anymore because freeze_go_callback() won't take the
sb->s_umount semaphore unconditionally anymore, so we can get rid of the
gfs2_withdraw_delayed() in gfs2_fill_super() entirely.

Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phylink: initialize carrier state at creation

commit 02d5fdbf4f2b8c406f7a4c98fa52aa181a11d733 upstream.

Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.

After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.

It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.

Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lan9303: consequently nested-lock physical MDIO

commit 5a22fbcc10f3f7d94c5d88afbbffa240a3677057 upstream.

When LAN9303 is MDIO-connected two callchains exist into
mdio->bus->write():

1. switch ports 1&2 ("physical" PHYs):

virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})->
  lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested

2. LAN9303 virtual PHY:

virtual MDIO bus (lan9303_phy_{read|write}) ->
  lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write}

If the latter functions just take
mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP
false-positive splat. It's false-positive because the first
mdio_lock in the second callchain above belongs to virtual MDIO bus, the
second mdio_lock belongs to physical MDIO bus.

Consequent annotation in lan9303_mdio_{read|write} as nested lock
(similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus)
prevents the following splat:

WARNING: possible circular locking dependency detected
5.15.71 #1 Not tainted
------------------------------------------------------
kworker/u4:3/609 is trying to acquire lock:
ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex
but task is already holding lock:
ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&bus->mdio_lock){+.+.}-{3:3}:
       lock_acquire
       __mutex_lock
       mutex_lock_nested
       lan9303_mdio_read
       _regmap_read
       regmap_read
       lan9303_probe
       lan9303_mdio_probe
       mdio_probe
       really_probe
       __driver_probe_device
       driver_probe_device
       __device_attach_driver
       bus_for_each_drv
       __device_attach
       device_initial_probe
       bus_probe_device
       deferred_probe_work_func
       process_one_work
       worker_thread
       kthread
       ret_from_fork
-> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}:
       __lock_acquire
       lock_acquire.part.0
       lock_acquire
       __mutex_lock
       mutex_lock_nested
       regmap_lock_mutex
       regmap_read
       lan9303_phy_read
       dsa_slave_phy_read
       __mdiobus_read
       mdiobus_read
       get_phy_device
       mdiobus_scan
       __mdiobus_register
       dsa_register_switch
       lan9303_probe
       lan9303_mdio_probe
       mdio_probe
       really_probe
       __driver_probe_device
       driver_probe_device
       __device_attach_driver
       bus_for_each_drv
       __device_attach
       device_initial_probe
       bus_probe_device
       deferred_probe_work_func
       process_one_work
       worker_thread
       kthread
       ret_from_fork
other info that might help us debug this:
 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(&bus->mdio_lock);
                               lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
                               lock(&bus->mdio_lock);
  lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
*** DEADLOCK ***
5 locks held by kworker/u4:3/609:
 #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work
 #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work
 #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach
 #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch
 #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
stack backtrace:
CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1
Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace
 show_stack
 dump_stack_lvl
 dump_stack
 print_circular_bug
 check_noncircular
 __lock_acquire
 lock_acquire.part.0
 lock_acquire
 __mutex_lock
 mutex_lock_nested
 regmap_lock_mutex
 regmap_read
 lan9303_phy_read
 dsa_slave_phy_read
 __mdiobus_read
 mdiobus_read
 get_phy_device
 mdiobus_scan
 __mdiobus_register
 dsa_register_switch
 lan9303_probe
 lan9303_mdio_probe
...

Cc: stable@vger.kernel.org
Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethtool: Fix documentation of ethtool_sprintf()

commit f55d8e60f10909dbc5524e261041e1d28d7d20d8 upstream.

This function takes a pointer to a pointer, unlike sprintf() which is
passed a plain pointer. Fix up the documentation to make this clear.

Fixes: 7888fe53b706 ("ethtool: Add common function for filling out strings")
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231028192511.100001-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ap: fix AP bus crash on early config change callback invocation

commit e14aec23025eeb1f2159ba34dbc1458467c4c347 upstream.

Fix kernel crash in AP bus code caused by very early invocation of the
config change callback function via SCLP.

After a fresh IML of the machine the crypto cards are still offline and
will get switched online only with activation of any LPAR which has the
card in it's configuration. A crypto card coming online is reported
to the LPAR via SCLP and the AP bus offers a callback function to get
this kind of information. However, it may happen that the callback is
invoked before the AP bus init function is complete. As the callback
triggers a synchronous AP bus scan, the scan may already run but some
internal states are not initialized by the AP bus init function resulting
in a crash like this:

  [   11.635859] Unable to handle kernel pointer dereference in virtual kernel address space
  [   11.635861] Failing address: 0000000000000000 TEID: 0000000000000887
  [   11.635862] Fault in home space mode while using kernel ASCE.
  [   11.635864] AS:00000000894c4007 R3:00000001fece8007 S:00000001fece7800 P:000000000000013d
  [   11.635879] Oops: 0004 ilc:1 [#1] SMP
  [   11.635882] Modules linked in:
  [   11.635884] CPU: 5 PID: 42 Comm: kworker/5:0 Not tainted 6.6.0-rc3-00003-g4dbf7cdc6b42 #12
  [   11.635886] Hardware name: IBM 3931 A01 751 (LPAR)
  [   11.635887] Workqueue: events_long ap_scan_bus
  [   11.635891] Krnl PSW : 0704c00180000000 0000000000000000 (0x0)
  [   11.635895]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
  [   11.635897] Krnl GPRS: 0000000001000a00 0000000000000000 0000000000000006 0000000089591940
  [   11.635899]            0000000080000000 0000000000000a00 0000000000000000 0000000000000000
  [   11.635901]            0000000081870c00 0000000089591000 000000008834e4e2 0000000002625a00
  [   11.635903]            0000000081734200 0000038000913c18 000000008834c6d6 0000038000913ac8
  [   11.635906] Krnl Code:>0000000000000000: 0000                illegal
  [   11.635906]            0000000000000002: 0000                illegal
  [   11.635906]            0000000000000004: 0000                illegal
  [   11.635906]            0000000000000006: 0000                illegal
  [   11.635906]            0000000000000008: 0000                illegal
  [   11.635906]            000000000000000a: 0000                illegal
  [   11.635906]            000000000000000c: 0000                illegal
  [   11.635906]            000000000000000e: 0000                illegal
  [   11.635915] Call Trace:
  [   11.635916]  [<0000000000000000>] 0x0
  [   11.635918]  [<000000008834e4e2>] ap_queue_init_state+0x82/0xb8
  [   11.635921]  [<000000008834ba1c>] ap_scan_domains+0x6fc/0x740
  [   11.635923]  [<000000008834c092>] ap_scan_adapter+0x632/0x8b0
  [   11.635925]  [<000000008834c3e4>] ap_scan_bus+0xd4/0x288
  [   11.635927]  [<00000000879a33ba>] process_one_work+0x19a/0x410
  [   11.635930] Discipline DIAG cannot be used without z/VM
  [   11.635930]  [<00000000879a3a2c>] worker_thread+0x3fc/0x560
  [   11.635933]  [<00000000879aea60>] kthread+0x120/0x128
  [   11.635936]  [<000000008792afa4>] __ret_from_fork+0x3c/0x58
  [   11.635938]  [<00000000885ebe62>] ret_from_fork+0xa/0x30
  [   11.635942] Last Breaking-Event-Address:
  [   11.635942]  [<000000008834c6d4>] ap_wait+0xcc/0x148

This patch improves the ap_bus_force_rescan() function which is
invoked by the config change callback by checking if a first
initial AP bus scan has been done. If not, the force rescan request
is simple ignored. Anyhow it does not make sense to trigger AP bus
re-scans even before the very first bus scan is complete.

Cc: stable@vger.kernel.org
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Disable TX_EMPTY irq while waiting for block length byte

commit e8183fa10c25c7b3c20670bf2b430ddcc1ee03c0 upstream.

During SMBus block data read process, we have seen high interrupt rate
because of TX_EMPTY irq status while waiting for block length byte (the
first data byte after the address phase). The interrupt handler does not
do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS.
Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives
first data byte from I2C device, then re-enable it to resume SMBus
transaction.

It takes 0.789 ms for host to receive data length from slave.
Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt.
And it is none after applying the patch.

Cc: stable@vger.kernel.org
Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sbsa_gwdt: Calculate timeout with 64-bit math

commit 5d6aa89bba5bd6af2580f872b57f438dab883738 upstream.

Commit abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
introduced new timer math for watchdog revision 1 with the 48 bit offset
register.

The gwdt->clk and timeout are u32, but the argument being calculated is
u64. Without a cast, the compiler performs u32 operations, truncating
intermediate steps, resulting in incorrect values.

A watchdog revision 1 implementation with a gwdt->clk of 1GHz and a
timeout of 600s writes 3647256576 to the one shot watchdog instead of
300000000000, resulting in the watchdog firing in 3.6s instead of 600s.

Force u64 math by casting the first argument (gwdt->clk) as a u64. Make
the order of operations explicit with parenthesis.

Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
Reported-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.14.x
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/7d1713c5ffab19b0f3de796d82df19e8b1f340de.1695286124.git.darren@os.amperecomputing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lsm: fix default return value for inode_getsecctx

commit b36995b8609a5a8fe5cf259a1ee768fcaed919f8 upstream.

-EOPNOTSUPP is the return value that implements a "no-op" hook, not 0.

Without this fix having only the BPF LSM enabled (with no programs
attached) can cause uninitialized variable reads in
nfsd4_encode_fattr(), because the BPF hook returns 0 without touching
the 'ctxlen' variable and the corresponding 'contextlen' variable in
nfsd4_encode_fattr() remains uninitialized, yet being treated as valid
based on the 0 return value.

Cc: stable@vger.kernel.org
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lsm: fix default return value for vm_enough_memory

commit 866d648059d5faf53f1cd960b43fe8365ad93ea7 upstream.

1 is the return value that implements a "no-op" hook, not 0.

Cc: stable@vger.kernel.org
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "i2c: pxa: move to generic GPIO recovery"

commit 7b211c7671212cad0b83603c674838c7e824d845 upstream.

This reverts commit 0b01392c18b9993a584f36ace1d61118772ad0ca.

Conversion of PXA to generic I2C recovery, makes the I2C bus completely
lock up if recovery pinctrl is present in the DT and I2C recovery is
enabled.

So, until the generic I2C recovery can also work with PXA lets revert
to have working I2C and I2C recovery again.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert ncsi: Propagate carrier gain/loss events to the NCSI controller

commit 9e2e7efbbbff69d8340abb56d375dd79d1f5770f upstream.

This reverts commit 3780bb29311eccb7a1c9641032a112eed237f7e3.

The cited commit introduced unwanted behavior.

The intent for the commit was to be able to detect carrier loss/gain
for just the NIC connected to the BMC. The unwanted effect is a
carrier loss for auxiliary paths also causes the BMC to lose
carrier. The BMC never regains carrier despite the secondary NIC
regaining a link.

This change, when merged, needs to be backported to stable kernels.
5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable

Fixes: 3780bb29311e ("ncsi: Propagate carrier gain/loss events to the NCSI controller")
CC: stable@vger.kernel.org
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirks for HP Laptops

commit 5d639b60971f003d3a9b2b31f8ec73b0718b5d57 upstream.

These HP laptops use Realtek HDA codec combined with 2 or 4 CS35L41
Amplifiers using SPI with Internal Boost.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115162116.494968-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable Mute LED on HP 255 G10

commit b944aa9d86d5f782bfe5e51336434c960304839c upstream.

HP 255 G10 has a mute LED that can be made to work using quirk
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2.
Enable already existing quirk - at correct line to keep order

Signed-off-by: Matus Malych <matus@malych.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231114133524.11340-1-matus@malych.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Enable internal speaker of ASUS K6500ZC

commit 713f040cd22285fcc506f40a0d259566e6758c3c upstream.

Apply the already existing quirk chain ALC294_FIXUP_ASUS_SPK to enable
the internal speaker of ASUS K6500ZC.

Signed-off-by: Chandradeep Dey <codesigning@chandradeepdey.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/NizcVHQ--3-9@chandradeepdey.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add Dell ALC295 to pin fall back table

commit 4b21a669ca21ed8f24ef4530b2918be5730114de upstream.

Add ALC295 to pin fall back table.
Remove 5 pin quirks for Dell ALC295.
ALC295 was only support MIC2 for external MIC function.
ALC295 assigned model "ALC269_FIXUP_DELL1_MIC_NO_PRESENCE" for pin
fall back table.
It was assigned wrong model. So, let's remove it.

Fixes: fbc571290d9f ("ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7c1998e873834df98d59bd7e0d08c72e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable Mute LED on HP 255 G8

commit 8384c0baf223e1c3bc7b1c711d80a4c6106d210e upstream.

This HP Notebook uses ALC236 codec with COEF 0x07 idx 1 controlling
the mute LED. Enable already existing quirk for this device.

Signed-off-by: Eymen Yigit <eymenyg01@gmail.com>
Cc: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231110150715.5141-1-eymenyg01@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: info: Fix potential deadlock at disconnection

commit c7a60651953359f98dbf24b43e1bf561e1573ed4 upstream.

As reported recently, ALSA core info helper may cause a deadlock at
the forced device disconnection during the procfs operation.

The proc_remove() (that is called from the snd_card_disconnect()
helper) has a synchronization of the pending procfs accesses via
wait_for_completion().  Meanwhile, ALSA procfs helper takes the global
mutex_lock(&info_mutex) at both the proc_open callback and
snd_card_info_disconnect() helper.  Since the proc_open can't finish
due to the mutex lock, wait_for_completion() never returns, either,
hence it deadlocks.

TASK#1 TASK#2
proc_reg_open()
  takes use_pde()
snd_info_text_entry_open()
snd_card_disconnect()
snd_info_card_disconnect()
  takes mutex_lock(&info_mutex)
proc_remove()
wait_for_completion(unused_pde)
  ... waiting task#1 closes
mutex_lock(&info_mutex)
=> DEADLOCK

This patch is a workaround for avoiding the deadlock scenario above.

The basic strategy is to move proc_remove() call outside the mutex
lock.  proc_remove() can work gracefully without extra locking, and it
can delete the tree recursively alone.  So, we call proc_remove() at
snd_info_card_disconnection() at first, then delete the rest resources
recursively within the info_mutex lock.

After the change, the function snd_info_disconnect() doesn't do
disconnection by itself any longer, but it merely clears the procfs
pointer.  So rename the function to snd_info_clear_entries() for
avoiding confusion.

The similar change is applied to snd_info_free_entry(), too.  Since
the proc_remove() is called only conditionally with the non-NULL
entry->p, it's skipped after the snd_info_clear_entries() call.

Reported-by: Shinhyung Kang <s47.kang@samsung.com>
Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: wait for data BG to be finished on direct IO allocation

commit 776a838f1fa95670c1c1cf7109a898090b473fa3 upstream.

Running the fio command below on a ZNS device results in "Resource
temporarily unavailable" error.

  $ sudo fio --name=w --directory=/mnt --filesize=1GB --bs=16MB --numjobs=16 \
        --rw=write --ioengine=libaio --iodepth=128 --direct=1

  fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=117440512, buflen=16777216
  fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=134217728, buflen=16777216
  ...

This happens because -EAGAIN error returned from btrfs_reserve_extent()
called from btrfs_new_extent_direct() is spilling over to the userland.

btrfs_reserve_extent() returns -EAGAIN when there is no active zone
available. Then, the caller should wait for some other on-going IO to
finish a zone and retry the allocation.

This logic is already implemented for buffered write in cow_file_range(),
but it is missing for the direct IO counterpart. Implement the same logic
for it.

Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 2ce543f47843 ("btrfs: zoned: wait until zone is finished when allocation didn't progress")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: recovery should not clear di_flushiter unconditionally

commit 7930d9e103700cde15833638855b750715c12091 upstream.

Because on v3 inodes, di_flushiter doesn't exist. It overlaps with
zero padding in the inode, except when NREXT64=1 configurations are
in use and the zero padding is no longer padding but holds the 64
bit extent counter.

This manifests obviously on big endian platforms (e.g. s390) because
the log dinode is in host order and the overlap is the LSBs of the
extent count field. It is not noticed on little endian machines
because the overlap is at the MSB end of the extent count field and
we need to get more than 2^^48 extents in the inode before it
manifests. i.e. the heat death of the universe will occur before we
see the problem in little endian machines.

This is a zero-day issue for NREXT64=1 configuraitons on big endian
machines. Fix it by only clearing di_flushiter on v2 inodes during
recovery.

Fixes: 9b7d16e34bbe ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
cc: stable@kernel.org # 5.19+
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix encryption of cleared, but unset rq_iter data buffers

commit 37de5a80e932f828c34abeaae63170d73930dca3 upstream.

Each smb_rqst struct contains two things: an array of kvecs (rq_iov) that
contains the protocol data for an RPC op and an iterator (rq_iter) that
contains the data payload of an RPC op.  When an smb_rqst is allocated
rq_iter is it always cleared, but we don't set it up unless we're going to
use it.

The functions that determines the size of the ciphertext buffer that will
be needed to encrypt a request, cifs_get_num_sgs(), assumes that rq_iter is
always initialised - and employs user_backed_iter() to check that the
iterator isn't user-backed.  This used to incidentally work, because
->user_backed was set to false because the iterator has never been
initialised, but with commit f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74[1]
which changes user_backed_iter() to determine this based on the iterator
type insted, a warning is now emitted:

        WARNING: CPU: 7 PID: 4584 at fs/smb/client/cifsglob.h:2165 smb2_get_aead_req+0x3fc/0x420 [cifs]
        ...
        RIP: 0010:smb2_get_aead_req+0x3fc/0x420 [cifs]
        ...
         crypt_message+0x33e/0x550 [cifs]
         smb3_init_transform_rq+0x27d/0x3f0 [cifs]
         smb_send_rqst+0xc7/0x160 [cifs]
         compound_send_recv+0x3ca/0x9f0 [cifs]
         cifs_send_recv+0x25/0x30 [cifs]
         SMB2_tcon+0x38a/0x820 [cifs]
         cifs_get_smb_ses+0x69c/0xee0 [cifs]
         cifs_mount_get_session+0x76/0x1d0 [cifs]
         dfs_mount_share+0x74/0x9d0 [cifs]
         cifs_mount+0x6e/0x2e0 [cifs]
         cifs_smb3_do_mount+0x143/0x300 [cifs]
         smb3_get_tree+0x15e/0x290 [cifs]
         vfs_get_tree+0x2d/0xe0
         do_new_mount+0x124/0x340
         __se_sys_mount+0x143/0x1a0

The problem is that rq_iter was never set, so the type is 0 (ie. ITER_UBUF)
which causes user_backed_iter() to return true.  The code doesn't
malfunction because it checks the size of the iterator - which is 0.

Fix cifs_get_num_sgs() to ignore rq_iter if its count is 0, thereby
bypassing the warnings.

It might be better to explicitly initialise rq_iter to a zero-length
ITER_BVEC, say, as it can always be reinitialised later.

Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Closes: https://lore.kernel.org/r/ZUfQo47uo0p2ZsYg@fedora.fritz.box/
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Cc: stable@vger.kernel.org
cc: Eric Biggers <ebiggers@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: do not pass cifs_sb when trying to add channels

commit 9599d59eb8fc0c0fd9480c4f22901533d08965ee upstream.

The only reason why cifs_sb gets passed today to cifs_try_adding_channels
is to pass the local_nls field for the new channels and binding session.
However, the ses struct already has local_nls field that is setup during
the first cifs_setup_session. So there is no need to pass cifs_sb.

This change removes cifs_sb from the arg list for this and the functions
that it calls and uses ses->local_nls instead.

Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: do not reset chan_max if multichannel is not supported at mount

commit 6e5e64c9477d58e73cb1a0e83eacad1f8df247cf upstream.

If the mount command has specified multichannel as a mount option,
but multichannel is found to be unsupported by the server at the time
of mount, we set chan_max to 1. Which means that the user needs to
remount the share if the server starts supporting multichannel.

This change removes this reset. What it means is that if the user
specified multichannel or max_channels during mount, and at this
time, multichannel is not supported, but the server starts supporting
it at a later point, the client will be capable of scaling out the
number of channels.

Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: force interface update before a fresh session setup

commit d9a6d78096056a3cb5c5f07a730ab92f2f9ac4e6 upstream.

During a session reconnect, it is possible that the
server moved to another physical server (happens in case
of Azure files). So at this time, force a query of server
interfaces again (in case of multichannel session), such
that the secondary channels connect to the right
IP addresses (possibly updated now).

Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: reconnect helper should set reconnect for the right channel

commit c3326a61cdbf3ce1273d9198b6cbf90965d7e029 upstream.

We introduced a helper function to be used by non-cifsd threads to
mark the connection for reconnect. For multichannel, when only
a particular channel needs to be reconnected, this had a bug.

This change fixes that by marking that particular channel
for reconnect.

Fixes: dca65818c80c ("cifs: use a different reconnect helper for non-cifsd threads")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: fix mount when dns_resolver key is not available

commit 5e2fd17f434d2fed78efb123e2fc6711e4f598f1 upstream.

There was a wrong assumption that with CONFIG_CIFS_DFS_UPCALL=y there
would always be a dns_resolver key set up so we could unconditionally
upcall to resolve UNC hostname rather than using the value provided by
mount(2).

Only require it when performing automount of junctions within a DFS
share so users that don't have dns_resolver key still can mount their
regular shares with server hostname resolved by mount.cifs(8).

Fixes: 348a04a8d113 ("smb: client: get rid of dfs code dep in namespace.c")
Cc: stable@vger.kernel.org
Tested-by: Eduard Bachmakov <e.bachmakov@gmail.com>
Reported-by: Eduard Bachmakov <e.bachmakov@gmail.com>
Closes: https://lore.kernel.org/all/CADCRUiNvZuiUZ0VGZZO9HRyPyw6x92kiA7o7Q4tsX5FkZqUkKg@mail.gmail.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: fix potential deadlock when releasing mids

commit e6322fd177c6885a21dd4609dc5e5c973d1a2eb7 upstream.

All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock.  If they don't, then an use-after-free bug
would have occurred anyways.

By getting rid of such spinlock also fixes a potential deadlock as
shown below

CPU 0                                CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread()            cifs_debug_data_proc_show()
 release_mid()
  spin_lock(&server->mid_lock);
                                     spin_lock(&cifs_tcp_ses_lock)
      spin_lock(&server->mid_lock)
  __release_mid()
   smb2_find_smb_tcon()
    spin_lock(&cifs_tcp_ses_lock) *deadlock*

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: fix use-after-free in smb2_query_info_compound()

commit 5c86919455c1edec99ebd3338ad213b59271a71b upstream.

The following UAF was triggered when running fstests generic/072 with
KASAN enabled against Windows Server 2022 and mount options
'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm'

  BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs]
  Read of size 8 at addr ffff888014941048 by task xfs_io/27534

  CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
  rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   dump_stack_lvl+0x4a/0x80
   print_report+0xcf/0x650
   ? srso_alias_return_thunk+0x5/0x7f
   ? srso_alias_return_thunk+0x5/0x7f
   ? __phys_addr+0x46/0x90
   kasan_report+0xda/0x110
   ? smb2_query_info_compound+0x423/0x6d0 [cifs]
   ? smb2_query_info_compound+0x423/0x6d0 [cifs]
   smb2_query_info_compound+0x423/0x6d0 [cifs]
   ? __pfx_smb2_query_info_compound+0x10/0x10 [cifs]
   ? srso_alias_return_thunk+0x5/0x7f
   ? __stack_depot_save+0x39/0x480
   ? kasan_save_stack+0x33/0x60
   ? kasan_set_track+0x25/0x30
   ? ____kasan_slab_free+0x126/0x170
   smb2_queryfs+0xc2/0x2c0 [cifs]
   ? __pfx_smb2_queryfs+0x10/0x10 [cifs]
   ? __pfx___lock_acquire+0x10/0x10
   smb311_queryfs+0x210/0x220 [cifs]
   ? __pfx_smb311_queryfs+0x10/0x10 [cifs]
   ? srso_alias_return_thunk+0x5/0x7f
   ? __lock_acquire+0x480/0x26c0
   ? lock_release+0x1ed/0x640
   ? srso_alias_return_thunk+0x5/0x7f
   ? do_raw_spin_unlock+0x9b/0x100
   cifs_statfs+0x18c/0x4b0 [cifs]
   statfs_by_dentry+0x9b/0xf0
   fd_statfs+0x4e/0xb0
   __do_sys_fstatfs+0x7f/0xe0
   ? __pfx___do_sys_fstatfs+0x10/0x10
   ? srso_alias_return_thunk+0x5/0x7f
   ? lockdep_hardirqs_on_prepare+0x136/0x200
   ? srso_alias_return_thunk+0x5/0x7f
   do_syscall_64+0x3f/0x90
   entry_SYSCALL_64_after_hwframe+0x6e/0xd8

  Allocated by task 27534:
   kasan_save_stack+0x33/0x60
   kasan_set_track+0x25/0x30
   __kasan_kmalloc+0x8f/0xa0
   open_cached_dir+0x71b/0x1240 [cifs]
   smb2_query_info_compound+0x5c3/0x6d0 [cifs]
   smb2_queryfs+0xc2/0x2c0 [cifs]
   smb311_queryfs+0x210/0x220 [cifs]
   cifs_statfs+0x18c/0x4b0 [cifs]
   statfs_by_dentry+0x9b/0xf0
   fd_statfs+0x4e/0xb0
   __do_sys_fstatfs+0x7f/0xe0
   do_syscall_64+0x3f/0x90
   entry_SYSCALL_64_after_hwframe+0x6e/0xd8

  Freed by task 27534:
   kasan_save_stack+0x33/0x60
   kasan_set_track+0x25/0x30
   kasan_save_free_info+0x2b/0x50
   ____kasan_slab_free+0x126/0x170
   slab_free_freelist_hook+0xd0/0x1e0
   __kmem_cache_free+0x9d/0x1b0
   open_cached_dir+0xff5/0x1240 [cifs]
   smb2_query_info_compound+0x5c3/0x6d0 [cifs]
   smb2_queryfs+0xc2/0x2c0 [cifs]

This is a race between open_cached_dir() and cached_dir_lease_break()
where the cache entry for the open directory handle receives a lease
break while creating it.  And before returning from open_cached_dir(),
we put the last reference of the new @cfid because of
!@cfid->has_lease.

Besides the UAF, while running xfstests a lot of missed lease breaks
have been noticed in tests that run several concurrent statfs(2) calls
on those cached fids

  CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
  CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
  CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108
  CIFS: VFS: Dump pending requests:
  CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
  CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
  CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108
  ...

To fix both, in open_cached_dir() ensure that @cfid->has_lease is set
right before sending out compounded request so that any potential
lease break will be get processed by demultiplex thread while we're
still caching @cfid.  And, if open failed for some reason, re-check
@cfid->has_lease to decide whether or not put lease reference.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: fix use-after-free bug in cifs_debug_data_proc_show()

commit d328c09ee9f15ee5a26431f5aad7c9239fa85e62 upstream.

Skip SMB sessions that are being teared down
(e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show()
to avoid use-after-free in @ses.

This fixes the following GPF when reading from /proc/fs/cifs/DebugData
while mounting and umounting

  [ 816.251274] general protection fault, probably for non-canonical
  address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI
  ...
  [  816.260138] Call Trace:
  [  816.260329]  <TASK>
  [  816.260499]  ? die_addr+0x36/0x90
  [  816.260762]  ? exc_general_protection+0x1b3/0x410
  [  816.261126]  ? asm_exc_general_protection+0x26/0x30
  [  816.261502]  ? cifs_debug_tcon+0xbd/0x240 [cifs]
  [  816.261878]  ? cifs_debug_tcon+0xab/0x240 [cifs]
  [  816.262249]  cifs_debug_data_proc_show+0x516/0xdb0 [cifs]
  [  816.262689]  ? seq_read_iter+0x379/0x470
  [  816.262995]  seq_read_iter+0x118/0x470
  [  816.263291]  proc_reg_read_iter+0x53/0x90
  [  816.263596]  ? srso_alias_return_thunk+0x5/0x7f
  [  816.263945]  vfs_read+0x201/0x350
  [  816.264211]  ksys_read+0x75/0x100
  [  816.264472]  do_syscall_64+0x3f/0x90
  [  816.264750]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
  [  816.265135] RIP: 0033:0x7fd5e669d381

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix caching of ctime on setxattr

commit 5923d6686a100c2b4cabd4c2ca9d5a12579c7614 upstream.

Fixes xfstest generic/728 which had been failing due to incorrect
ctime after setxattr and removexattr

Update ctime on successful set of xattr

Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: allow dumping session and tcon id to improve stats analysis and debugging

commit de4eceab578ead12a71e5b5588a57e142bbe8ceb upstream.

When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount.  In some recent examples this turned out to  be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.

Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.

Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix touch -h of symlink

commit 475efd9808a3094944a56240b2711349e433fb66 upstream.

For example:
      touch -h -t 02011200 testfile
where testfile is a symlink would not change the timestamp, but
      touch -t 02011200 testfile
does work to change the timestamp of the target

Suggested-by: David Howells <dhowells@redhat.com>
Reported-by: Micah Veilleux <micah.veilleux@iba-group.com>
Closes: https://bugzilla.samba.org/show_bug.cgi?id=14476
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix creating FIFOs when mounting with "sfu" mount option

commit 72bc63f5e23a38b65ff2a201bdc11401d4223fa9 upstream.

Fixes some xfstests including generic/564 and generic/157

The "sfu" mount option can be useful for creating special files (character
and block devices in particular) but could not create FIFOs. It did
recognize existing empty files with the "system" attribute flag as FIFOs
but this is too general, so to support creating FIFOs more safely use a new
tag (but the same length as those for char and block devices ie "IntxLNK"
and "IntxBLK") "LnxFIFO" to indicate that the file should be treated as a
FIFO (when mounted with the "sfu").   For some additional context note that
"sfu" followed the way that "Services for Unix" on Windows handled these
special files (at least for character and block devices and symlinks),
which is different than newer Windows which can handle special files
as reparse points (which isn't an option to many servers).

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Enable RPM on controllers that support low-power states

commit a5d6264b638efeca35eff72177fd28d149e0764b upstream.

Use the low-power states of the underlying platform to enable runtime PM.
If the platform doesn't support runtime D3, then enabling default RPM will
result in the controller malfunctioning, as in the case of hotplug devices
not being detected because of a failed interrupt generation.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-16-mathias.nyman@linux.intel.com
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix mmap_base calculation when stack grows upwards

commit 5f74f820f6fc844b95f9e5e406e0a07d97510420 upstream.

Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd430768 ("parisc: Use generic mmap top-down
layout and brk randomization").

That commit switched parisc to use the common infrastructure to calculate
mmap_base, but missed that the mmap_base() function takes care for
architectures where the stack grows downwards only.

Fix the mmap_base() calculation to include the stack-grows-upwards case
and thus fix the userspace crashes on parisc.

Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100
Fixes: 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization")
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/power: Fix power soft-off when running on qemu

commit 6ad6e15a9c46b8f0932cd99724f26f3db4db1cdf upstream.

Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.

Fixes: d0c219472980 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/pgtable: Do not drop upper 5 address bits of physical address

commit 166b0110d1ee53290bd11618df6e3991c117495a upstream.

When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Prevent booting 64-bit kernels on PA1.x machines

commit a406b8b424fa01f244c1aab02ba186258448c36b upstream.

Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 591d2108f3abc ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Extend signal handler coverage to unmount on receiving signal

[ Upstream commit 3aff5146445582454c35900f3c0c972987cdd595 ]

Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe495 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.

Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().

Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.

Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.

Fixes: caddc0fbe495 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Make benchmark command const and build it with pointers

[ Upstream commit e33cb5702a9f287d829b0e9e6abe57f6a4aba6d2 ]

Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.

Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.

CMT test has to create a copy of the benchmark command before altering
the benchmark command.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Simplify span lifetime

[ Upstream commit b1a901e078c4ee4a6fe13021c4577ef5f3155251 ]

struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().

Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Remove bw_report and bm_type from main()

[ Upstream commit 47e36f16c7846bf3627ff68525e02555c53dc99e ]

bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.

Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcutorture: Fix stuttering races and other issues

[ Upstream commit cca42bd8eb1b54a4c9bbf48c79d120e66619a3e4 ]

The stuttering code isn't functioning as expected. Ideally, it should
pause the torture threads for a designated period before resuming. Yet,
it fails to halt the test for the correct duration. Additionally, a race
condition exists, potentially causing the stuttering code to pause for
an extended period if the 'spt' variable is non-zero due to the stutter
orchestration thread's inadequate CPU time.

Moreover, over-stuttering can hinder RCU's progress on TREE07 kernels.
This happens as the stuttering code may run within a softirq due to RCU
callbacks. Consequently, ksoftirqd keeps a CPU busy for several seconds,
thus obstructing RCU's progress. This situation triggers a warning
message in the logs:

[ 2169.481783] rcu_torture_writer: rtort_pipe_count: 9

This warning suggests that an RCU torture object, although invisible to
RCU readers, couldn't make it past the pipe array and be freed -- a
strong indication that there weren't enough grace periods during the
stutter interval.

To address these issues, this patch sets the "stutter end" time to an
absolute point in the future set by the main stutter thread. This is
then used for waiting in stutter_wait(). While the stutter thread still
defines this absolute time, the waiters' waiting logic doesn't rely on
the stutter thread receiving sufficient CPU time to halt the stuttering
as the halting is now self-controlled.

Cc: stable@vger.kernel.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

torture: Make torture_hrtimeout_ns() take an hrtimer mode parameter

[ Upstream commit a741deac787f0d2d7068638c067db20af9e63752 ]

The current torture-test sleeps are waiting for a duration, but there
are situations where it is better to wait for an absolute time, for
example, when ending a stutter interval.  This commit therefore adds
an hrtimer mode parameter to torture_hrtimeout_ns().  Why not also the
other torture_hrtimeout_*() functions?  The theory is that most absolute
times will be in nanoseconds, especially not (say) jiffies.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Stable-dep-of: cca42bd8eb1b ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: enable dsc_clk even if dsc_pg disabled

[ Upstream commit 40255df370e94d44f0f0a924400d68db0ee31bec ]

[why]
need to enable dsc_clk regardless dsc_pg

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE

[ Upstream commit da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c ]

Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part.
The PID/VID was reported by the patch last year. [1]
Some SBCs like rockpi 5B A8 module contains the device.
And it`s founded in website. [2] [3]

Here is the device tables in /sys/kernel/debug/usb/devices .

T:  Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=b85b Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/
Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4
Link: https://ubuntuforums.org/showthread.php?t=2489527
Cc: stable@vger.kernel.org
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Guan Wentao <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables

[ Upstream commit 02be109d3a405dbc4d53fb4b4473d7a113548088 ]

This device is used in TP-Link TX20E WiFi+Bluetooth adapter.

Relevant information in /sys/kernel/debug/usb/devices
about the Bluetooth device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3570 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Masum Reza <masumrezarock100@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix regression in mount mediation

[ Upstream commit 157a3537d6bc28ceb9a11fc8cb67f2152d860146 ]

commit 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")

introduced a new move_mount(2) system call and a corresponding new LSM
security_move_mount hook but did not implement this hook for any
existing LSM. This creates a regression for AppArmor mediation of
mount. This patch provides a base mapping of the move_mount syscall to
the existing mount mediation. In the future we may introduce
additional mediations around the new mount calls.

Fixes: 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
CC: stable@vger.kernel.org
Reported-by: Andreas Steinmetz <anstein99@googlemail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: pass cred through to audit info.

[ Upstream commit 90c436a64a6e20482a9a613c47eb4af2e8a5328e ]

The cred is needed to properly audit some messages, and will be needed
in the future for uid conditional mediation. So pass it through to
where the apparmor_audit_data struct gets defined.

Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: rename audit_data->label to audit_data->subj_label

[ Upstream commit d20f5a1a6e792d22199c9989ec7ab9e95c48d60c ]

rename audit_data's label field to subj_label to better reflect its
use. Also at the same time drop unneeded assignments to ->subj_label
as the later call to aa_check_perms will do the assignment if needed.

Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: combine common_audit_data and apparmor_audit_data

[ Upstream commit bd7bd201ca46c211c3ab251ca9854787d1331a2f ]

Everywhere where common_audit_data is used apparmor audit_data is also
used. We can simplify the code and drop the use of the aad macro
everywhere by combining the two structures.

Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix kernel-doc warnings in apparmor/policy.c

[ Upstream commit 25ff0ff2d6286928dc516c74b879809c691c2dd8 ]

Fix kernel-doc warnings:

security/apparmor/policy.c:294: warning: Function parameter or
member 'proxy' not described in 'aa_alloc_profile'
security/apparmor/policy.c:785: warning: Function parameter or
member 'label' not described in 'aa_policy_view_capable'
security/apparmor/policy.c:785: warning: Function parameter or
member 'ns' not described in 'aa_policy_view_capable'
security/apparmor/policy.c:847: warning: Function parameter or
member 'ns' not described in 'aa_may_manage_policy'
security/apparmor/policy.c:964: warning: Function parameter or
member 'hname' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'info' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'noreplace' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'ns' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'p' not described in '__lookup_replace'

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix kernel-doc warnings in apparmor/resource.c

[ Upstream commit 13c1748e217078d437727eef333cb0387d13bc0e ]

Fix kernel-doc warnings:

security/apparmor/resource.c:111: warning: Function parameter or
member 'label' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'new_rlim' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'resource' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'task' not described in 'aa_task_setrlimit'

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>