Mark Nauwelaerts [Wed, 31 Dec 2014 19:47:24 +0000 (20:47 +0100)]
tests: nodist for orc generated code
Tim-Philipp Müller [Thu, 1 Jan 2015 15:46:00 +0000 (15:46 +0000)]
aggregator: add g-i transfer and scope annotations
Tim-Philipp Müller [Thu, 1 Jan 2015 14:10:05 +0000 (14:10 +0000)]
aggregator: register names of iterate_sinkpads functions with debug system
Tim-Philipp Müller [Thu, 1 Jan 2015 14:03:02 +0000 (14:03 +0000)]
aggregator: reduce debug messages for taking/releasing logs to TRACE level
Don't spam debug log with this stuff.
Tim-Philipp Müller [Wed, 31 Dec 2014 18:16:21 +0000 (18:16 +0000)]
aggregator: move property member into private structure
Our locking (or lack thereof) while accessing this also
looks generally quite dodgy.
Tim-Philipp Müller [Wed, 31 Dec 2014 14:50:58 +0000 (14:50 +0000)]
aggregator: remove empty dispose function
Tim-Philipp Müller [Tue, 30 Dec 2014 23:58:34 +0000 (23:58 +0000)]
aggregator: give private functions namespace prefix
Especially the GST_DEBUG_FUNCPTR ones.
Tim-Philipp Müller [Wed, 31 Dec 2014 12:35:06 +0000 (12:35 +0000)]
aggregator: fix up some docs comments in header
Tim-Philipp Müller [Tue, 30 Dec 2014 23:44:46 +0000 (23:44 +0000)]
aggregator: remove now-unused system clock member
Tim-Philipp Müller [Tue, 30 Dec 2014 19:43:43 +0000 (19:43 +0000)]
glmixer, glvideomixer: update for GstAggregatorPadForeachFunc change
Tim-Philipp Müller [Tue, 30 Dec 2014 19:26:47 +0000 (19:26 +0000)]
glmixer: update for aggregator start/stop vfunc change
Tim-Philipp Müller [Tue, 30 Dec 2014 19:22:01 +0000 (19:22 +0000)]
aggregator: make GstAggregatorPadForeachFunc take an GstAggregatorPad
Tim-Philipp Müller [Tue, 30 Dec 2014 18:01:34 +0000 (18:01 +0000)]
audiomixer: update for aggregator start/stop vfunc change
Tim-Philipp Müller [Tue, 30 Dec 2014 17:56:35 +0000 (17:56 +0000)]
videoaggregator: update for aggregator start/stop vfunc change
Tim-Philipp Müller [Tue, 30 Dec 2014 17:50:17 +0000 (17:50 +0000)]
aggregator: bring start/stop vfunc semantics in line with other baseclasses
Sub-class should not have to chain up to GstAggregator's start/stop
vfuncs, same as in GstBaseSrc, GstBaseSink, GstBaseTransform etc.
Tim-Philipp Müller [Tue, 30 Dec 2014 15:29:36 +0000 (15:29 +0000)]
audiomixer: fix output-block-size property description
Thiago Santos [Tue, 30 Dec 2014 11:07:18 +0000 (08:07 -0300)]
hlsdemux: only typefind when we have a minimum amount of data
For small amounts some data might be mistyped and it would cause
the pipeline to fail. For example if you have AAC inside mpegts,
for small amounts, the AAC samples would cause the typefinder to
think it is AAC and not mpegts.
https://bugzilla.gnome.org/show_bug.cgi?id=736061
Sebastian Dröge [Mon, 29 Dec 2014 10:49:51 +0000 (11:49 +0100)]
decklink: Add support for 4K / UHD modes
Sebastian Dröge [Mon, 29 Dec 2014 10:49:42 +0000 (11:49 +0100)]
decklink: Fix indention
Thiago Santos [Mon, 29 Dec 2014 13:44:53 +0000 (10:44 -0300)]
dashdemux: do not try to ref null pointer
Playlists might be missing the availability start time, so check for
it before trying to ref the object
Thiago Santos [Mon, 29 Dec 2014 13:44:19 +0000 (10:44 -0300)]
dashdemux: run gst-indent on mpdparser
Run gst-indent on mpdparser to have it stop complaining on every
commit
Tim-Philipp Müller [Sun, 28 Dec 2014 18:26:49 +0000 (18:26 +0000)]
aggregator: remove pointless GST_DEBUG_FUNCPTR
Not useful for GObject vfuncs.
Tim-Philipp Müller [Sun, 28 Dec 2014 18:24:21 +0000 (18:24 +0000)]
aggregator: remove duplicate pad parent_class variable
G_DEFINE_TYPE already provides one, just need to use it.
Tim-Philipp Müller [Sun, 28 Dec 2014 18:22:57 +0000 (18:22 +0000)]
aggregator: add _CAST() variants for cast macros
Tim-Philipp Müller [Sun, 28 Dec 2014 01:13:33 +0000 (01:13 +0000)]
aggregator: make padding larger
Esp. the class structures, can't have enough
spare space for virtual functions.
Tim-Philipp Müller [Sun, 28 Dec 2014 00:58:04 +0000 (00:58 +0000)]
siren: remove unneeded structure padding
Public headers are private and not installed.
Nirbheek Chauhan [Sat, 27 Dec 2014 10:45:41 +0000 (16:15 +0530)]
aggregator: Log to the pad instead of the element
More correct way of doing the same thing as before
Nirbheek Chauhan [Sat, 27 Dec 2014 10:20:17 +0000 (15:50 +0530)]
glvideomixer: Point to compositor for the pad properties documentation
Nirbheek Chauhan [Sat, 27 Dec 2014 10:19:47 +0000 (15:49 +0530)]
compositor: Document the pad properties
Nirbheek Chauhan [Sat, 27 Dec 2014 10:19:39 +0000 (15:49 +0530)]
audiomixer: Document the pad properties
Sebastian Dröge [Sat, 27 Dec 2014 08:49:43 +0000 (09:49 +0100)]
aggregator: Make sure that the minimum latencies are never GST_CLOCK_TIME_NONE
Sebastian Dröge [Sat, 27 Dec 2014 08:42:57 +0000 (09:42 +0100)]
aggregator: Wait for the minimum latency, not the maximum
The minimum latency is the latency we have to wait at least
to guarantee that all upstreams have produced data. The maximum
latency has no meaning like that and shouldn't be used for waiting.
Nirbheek Chauhan [Fri, 26 Dec 2014 22:51:36 +0000 (04:21 +0530)]
aggregator: Clamp the min latency at the max if it's greater
Nirbheek Chauhan [Fri, 26 Dec 2014 22:51:26 +0000 (04:21 +0530)]
aggregator: Print the sinkpad name while logging latency queries
Very useful while debugging.
Nirbheek Chauhan [Fri, 26 Dec 2014 22:49:52 +0000 (04:19 +0530)]
aggregator: Take the stream lock when iterating sink pads
When iterating sink pads to collect some data, we should take the stream lock so
we don't get stale data and possibly deadlock because of that. This fixes
a definitive deadlock in _wait_and_check() that manifests with high max
latencies in a live pipeline, and fixes other possible race conditions.
Thiago Santos [Sat, 27 Dec 2014 02:05:43 +0000 (23:05 -0300)]
wrappercamerabinsrc: do not set source state with lock
It might be racy with the image probe thread as it uses the capture
mutex just like the start-capture handler from camerabin. The
start-capture would be waiting for the source's streaming thread
to stop to be able to set the source state to ready while the
probe would be blocked waiting to acquire the capture mutex.
It causes a deadlock.
Thiago Santos [Fri, 26 Dec 2014 13:17:19 +0000 (10:17 -0300)]
wrappercamerabinsrc: use the drain query instead of flush
The flush might clear any pending captures that are still in
queues being processed while the drain query will wait for those
to be properly done
Alessandro Decina [Fri, 26 Dec 2014 11:45:41 +0000 (22:45 +1100)]
avfvideosrc: improve timestamp code
Use a combination of the running time and CMClockGetTime from AVF to compute
timestamps.
Tim-Philipp Müller [Fri, 26 Dec 2014 11:48:56 +0000 (11:48 +0000)]
gdppay: use public API for accessing stream header arrays in caps
Don't rely on core implementation details, which are private and
may change. It's also not needed here, the performance impact is
close to none. Also copy buffer before changing its metadata.
Tim-Philipp Müller [Fri, 26 Dec 2014 11:29:12 +0000 (11:29 +0000)]
tests: gdpdepay: update for internal gdp refactoring
This test uses some internal/private API, so needs to
be updated for recent changes.
Tim-Philipp Müller [Fri, 26 Dec 2014 11:27:38 +0000 (11:27 +0000)]
gdppay: refactor payloading code a little
Get rid of some indirections and inefficiencies,
just payload things directly which gives us more
control over what memory is allocated where and
how and makes things much simpler. In particular,
we can now allocate the payload header plus the
GstMemory to represent it in one go.
Tim-Philipp Müller [Mon, 15 Dec 2014 00:41:22 +0000 (00:41 +0000)]
gdppay: refactor a little
Get rid of now-useless packetizer struct and just
call internal functions directly. Also remove
version property which is now defunct, not least
because we create the packetizer with the
version in the init function before a version
can be set.
Tim-Philipp Müller [Sat, 13 Dec 2014 16:46:07 +0000 (16:46 +0000)]
tests: gdppay: initialise memory of buffers used in unit test
Tim-Philipp Müller [Sat, 13 Dec 2014 15:23:48 +0000 (15:23 +0000)]
gdppay: optimise payloading of buffers with multiple memories
Add function to calculate a payload CRC across multiple memories
so we don't have to merge buffers with multiple memories just to
calculate the CRC. Also make CRC calculation function static,
since it's not used outside dataprotocol.h and move special-casing
of length = 0 -> CRC = 0 into CRC function (from caller).
Perhaps more importantly, since payload CRC is off by default:
don't map buffer (and possibly merge memories in the process)
if we are not going to use it to calculate a CRC anyway.
Tim-Philipp Müller [Sat, 13 Dec 2014 15:19:16 +0000 (15:19 +0000)]
gdppay: dataprotocol: drop bogus const
Doesn't really make sense given that we map
it and possibly merge memories and such.
Vijay Jayaraman [Mon, 24 Nov 2014 19:18:36 +0000 (12:18 -0700)]
hlsdemux: typefind might fail if first buffer is too short
If typefind fails, check to see if the buffer is too short for typefind. If this is the case,
prepend the decrypted buffer to the pending buffer and try again the next time around.
https://bugzilla.gnome.org/show_bug.cgi?id=740458
Thiago Santos [Wed, 27 Aug 2014 19:26:19 +0000 (16:26 -0300)]
hlsdemux: port to adaptive base class
Conflicts:
ext/hls/gsthlsdemux.c
ext/hls/gsthlsdemux.h
Thiago Santos [Tue, 23 Dec 2014 04:51:50 +0000 (01:51 -0300)]
adaptivedemux: check if element exists before setting it to null
Under certain error conditions it might happen that the element
has been freed already and trying to set it to NULL causes an
assertion
Thiago Santos [Tue, 23 Dec 2014 04:51:10 +0000 (01:51 -0300)]
adaptivedemux: make sure task has stopped before freeing it
Otherwise the thread will be running and its memory will get freed.
This leads to memory corruption
Thiago Santos [Tue, 23 Dec 2014 04:48:41 +0000 (01:48 -0300)]
adaptivedemux: fix segment start when exposing new streams
Segment start needs only to be updated when starting the streams
or after a seek, doing it during bitrate changes will cause the
running time to go discontinuous (jump back to a previous ts)
and QOS will drop buffers
Thiago Santos [Fri, 19 Dec 2014 05:22:47 +0000 (02:22 -0300)]
adaptivedemux: allow subclass to use new pads group when switching bitrate
Fix pad groups switching when bitrate changes to allow HLS to use this feature
Sebastian Dröge [Tue, 23 Dec 2014 11:24:48 +0000 (12:24 +0100)]
audiomixer: If getting a timeout before having caps, just advance our position
This can happen if this is a live pipeline and no source produced any buffer
and sent no caps until the an output buffer should've been produced according
to the latency.
Sebastian Dröge [Tue, 23 Dec 2014 11:15:50 +0000 (12:15 +0100)]
audiomixer: Make sure to release the current buffer in reset()
If we didn't output the last one in aggregate because we were shutting down
earlier we might otherwise leak it.
Sebastian Dröge [Tue, 23 Dec 2014 10:45:50 +0000 (11:45 +0100)]
audiomixer: Change blocksize property to output-buffer-duration in time format
This makes the interface of audiomixer independent of the actual caps.
Sebastian Dröge [Tue, 23 Dec 2014 10:45:05 +0000 (11:45 +0100)]
aggregator: Don't leak flush-start events
Sebastian Dröge [Tue, 23 Dec 2014 09:24:27 +0000 (10:24 +0100)]
aggregator: Also change the default latency to 0, not just the minimum
Sebastian Dröge [Tue, 23 Dec 2014 08:52:20 +0000 (09:52 +0100)]
aggregator: Fix docs and default value of the latency property
Sebastian Dröge [Mon, 22 Dec 2014 21:19:52 +0000 (22:19 +0100)]
aggregator: Also include the subclass latency in the result of the latency query
Sebastian Dröge [Mon, 22 Dec 2014 21:11:30 +0000 (22:11 +0100)]
videoaggregator: Use the src query implementation of aggregator as the default case
Sebastian Dröge [Mon, 22 Dec 2014 21:11:13 +0000 (22:11 +0100)]
audiomixer: Use the src query implementation of aggregator as the default case
Tim-Philipp Müller [Mon, 22 Dec 2014 16:45:05 +0000 (16:45 +0000)]
bayer2rgb: take into account filter in transform_caps function
Fixes criticals when filter caps are passed.
Also fix wrong GST_DEBUG_OBJECT use.
https://bugzilla.gnome.org/show_bug.cgi?id=741863
Sebastian Dröge [Mon, 22 Dec 2014 14:26:37 +0000 (15:26 +0100)]
aggregator: Post a latency message if the value of the latency property changes
Sebastian Dröge [Mon, 22 Dec 2014 14:03:59 +0000 (15:03 +0100)]
aggregator: Wake up the src thread after handling a latency query
Due to changed latencies or changed live-ness we might have to
adjust if we wait on a deadline at all and how long.
Sebastian Dröge [Mon, 22 Dec 2014 14:00:36 +0000 (15:00 +0100)]
aggregator: Don't count the number of times we need to wake up but instead check all conditions for waiting again
This simplifies the code and also makes sure that we don't forget to check all
conditions for waiting.
Also fix a potential deadlock caused by not checking if we're actually still
running before starting to wait.
Sebastian Dröge [Mon, 22 Dec 2014 10:49:08 +0000 (11:49 +0100)]
vtenc: Instead of crashing if no corresponding frame is found, ignore this
... and hope that everything will be fine. This shouldn't really happen but
previously happened during shutdown. It should be fixed in videoencoder now,
but better be on the safe side here.
Sebastian Dröge [Mon, 22 Dec 2014 10:46:05 +0000 (11:46 +0100)]
MAINTAINERS: Update my mail address
Stefan Sauer [Sun, 21 Dec 2014 12:47:25 +0000 (07:47 -0500)]
audiomixer: fix build flag order
Have the libraries/inlcudes from plugins-bad first to avoid picking up the installed version.
Fixes the build when the local api changed.
Stefan Sauer [Sat, 20 Dec 2014 17:24:53 +0000 (12:24 -0500)]
freeverb: add a few presets
Nicolas Dufresne [Fri, 19 Dec 2014 18:18:50 +0000 (13:18 -0500)]
gltest: Port to new API
https://bugzilla.gnome.org/show_bug.cgi?id=740900
Nicolas Dufresne [Fri, 19 Dec 2014 17:22:12 +0000 (12:22 -0500)]
glbufferpool: Always recalculate buffer size
Actually we should always recalculate buffer size since our buffer size
even when not-padded is smaller for many sub-sampled formats. This is
because we don't add padding between the planes.
https://bugzilla.gnome.org/show_bug.cgi?id=740900
Nicolas Dufresne [Fri, 19 Dec 2014 17:12:08 +0000 (12:12 -0500)]
glmemory: No need for padding
A memory object cannot be put on stack, so no need for padding.
Nicolas Dufresne [Fri, 19 Dec 2014 17:11:08 +0000 (12:11 -0500)]
gl: Add support for GstVideoAlignment
This allow saving a copy with libav video decoders or decoders with
similar padding requirement.
https://bugzilla.gnome.org/show_bug.cgi?id=740900
Nicolas Dufresne [Sat, 22 Nov 2014 16:25:23 +0000 (11:25 -0500)]
glmemory: Handle upload/download flags from map
Problem was that if buffer was mapped READWRITE (state of buffers from
libav right now), mapping it READ/GL will not upload. This is because the
flag is only set when the buffer is unmapped. We can fix this by setting
the flags in map. This result in already mapped buffer that get mapped
to be read in GL will be uploaded. The problem is that if the write
mapper makes modification afterward, the modification will never get
uploaded.
https://bugzilla.gnome.org/show_bug.cgi?id=740900
Nicolas Dufresne [Sun, 14 Dec 2014 02:47:38 +0000 (21:47 -0500)]
glmemory: Handle custom stride with OPENGL3
https://bugzilla.gnome.org/show_bug.cgi?id=740900
Sebastian Dröge [Fri, 19 Dec 2014 14:05:58 +0000 (15:05 +0100)]
decklink: Fix various compiler warnings with gcc
Sebastian Dröge [Fri, 19 Dec 2014 13:50:09 +0000 (14:50 +0100)]
decklink: Re-add the COM initialization code for Windows
Untested, and we will never deinitialize COM again.
Sebastian Dröge [Fri, 19 Dec 2014 13:38:03 +0000 (14:38 +0100)]
decklink: Remove in-same-pipeline detection code for audio/video elements of the same device
This causes deadlocks sometimes for some reason.
Sebastian Dröge [Fri, 19 Dec 2014 13:35:03 +0000 (14:35 +0100)]
decklinkvideosink: Implement clock slaving
Sebastian Dröge [Fri, 19 Dec 2014 12:52:08 +0000 (13:52 +0100)]
decklinkvideosink: Add some more debug output for when frames are scheduled
Sebastian Dröge [Fri, 19 Dec 2014 12:28:29 +0000 (13:28 +0100)]
decklink: Add property for configuring the buffer size of the sources
Sebastian Dröge [Fri, 19 Dec 2014 12:24:10 +0000 (13:24 +0100)]
decklinkaudiosrc: Implement timestamp jitter and discont handling
Sebastian Dröge [Fri, 19 Dec 2014 11:37:30 +0000 (12:37 +0100)]
decklink: Our capture time is the end timestamp of the buffer, subtract the duration
Sebastian Dröge [Fri, 19 Dec 2014 11:30:04 +0000 (12:30 +0100)]
decklink: Allow for a maximum of 5 packets to be queued up
In case downstream is a bit slow with consuming packets at times.
Sebastian Dröge [Fri, 19 Dec 2014 11:03:09 +0000 (12:03 +0100)]
decklink: Implement latency query in sources and remember selected mode
Sebastian Dröge [Thu, 18 Dec 2014 17:30:16 +0000 (18:30 +0100)]
decklink: Remove obsolete files
Sebastian Dröge [Thu, 18 Dec 2014 16:31:20 +0000 (17:31 +0100)]
decklink: Add initial version of audio and video sources
Sebastian Dröge [Sat, 13 Dec 2014 16:23:31 +0000 (17:23 +0100)]
decklink: Initial version of the audio/video sink rewrite
Sebastian Dröge [Fri, 19 Dec 2014 12:04:58 +0000 (13:04 +0100)]
audiomixer: Track discont-time per pad instead of globally
We do discont handling per pad, not per element!
Branko Subasic [Mon, 15 Dec 2014 15:27:16 +0000 (16:27 +0100)]
curlsmtpsink: add final boundary to all multipart emails
Corrected the final boundary mechanism so that a final boundary is
added to each mail with multipart content that is sent,
not just to the last one.
https://bugzilla.gnome.org/show_bug.cgi?id=741553
Sebastian Dröge [Thu, 18 Dec 2014 22:33:58 +0000 (23:33 +0100)]
audiomixer: We're only EOS if all our pads are actually EOS
Having a buffer or not on the pad is irrelevant.
Sebastian Dröge [Thu, 18 Dec 2014 21:42:14 +0000 (22:42 +0100)]
audiomixer: The pad's size is always supposed to be the whole buffer size
And the offset the offset into that buffer. Changing the size will
cause all kinds of assumptions to fail and cause crashes.
Sebastian Dröge [Thu, 18 Dec 2014 21:04:38 +0000 (22:04 +0100)]
videoaggregator: Don't try to map NULL buffers
Sebastian Dröge [Thu, 18 Dec 2014 21:03:04 +0000 (22:03 +0100)]
videoaggregator: Make sure to always update the pad's videoinfo together with buffers
Otherwise the videoinfo and the buffer content can go out of sync.
Sebastian Dröge [Thu, 18 Dec 2014 10:48:37 +0000 (11:48 +0100)]
compositor: Fix memory leak when no buffer is available for a pad currently
CID
1258718
Sebastian Dröge [Thu, 18 Dec 2014 09:54:05 +0000 (10:54 +0100)]
Automatic update of common submodule
From
ef1ffdc to
f2c6b95
Thiago Santos [Thu, 18 Dec 2014 01:01:23 +0000 (22:01 -0300)]
x265enc: reuse the gstvideo proxy getcaps
The caps query is implementing the same logic as the default
handler from the base class. Reuse it to simplify code.
Thiago Santos [Thu, 18 Dec 2014 00:52:13 +0000 (21:52 -0300)]
opusenc: plug ref leak of template caps
the pad template caps is already a new ref. No need to copy.
Sebastian Dröge [Wed, 17 Dec 2014 18:51:32 +0000 (19:51 +0100)]
aggregator: Add function to allow subclasses to set their own latency
For audiomixer this is one blocksize, for videoaggregator this should
be the duration of one output frame.
Sebastian Dröge [Wed, 17 Dec 2014 18:37:22 +0000 (19:37 +0100)]
audiomixer: Make sure to not have pads being behind the current offset
We would break sync between the different streams then.
Sebastian Dröge [Wed, 17 Dec 2014 16:54:09 +0000 (17:54 +0100)]
aggregator: Add a timeout parameter to ::aggregate()
When this is TRUE, we really have to produce output. This happens
in live mixing mode when we have to output something for the current
time, no matter if we have enough input or not.