SirnamSwetha [Sat, 30 Jan 2016 20:46:26 +0000 (02:16 +0530)]
Staging: clocking-wizard: Avoid CamelCase
This patch fixes the checkpatch.pl issue:
CHECK: Avoid CamelCase: <WZRD_CLkOUT0_FRAC_EN>
CHECK: Avoid CamelCase: <WZRD_CLkFBOUT_FRAC_EN>
Signed-off-by: SirnamSwetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anjali Menon [Sat, 21 Nov 2015 17:35:17 +0000 (23:05 +0530)]
staging: rts5208: Removed blank lines
Removed multiple blank lines to avoid the check detected
by checkpatch.pl.
CHECK: Please don't use multiple blank lines
Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Sat, 21 Nov 2015 11:20:30 +0000 (12:20 +0100)]
staging: rts5208: Remove unnecessary synchronize_irq() before free_irq()
Calling synchronize_irq() right before free_irq() is quite useless. On one
hand the IRQ can easily fire again before free_irq() is entered, on the
other hand free_irq() itself calls synchronize_irq() internally (in a race
condition free way), before any state associated with the IRQ is freed.
Patch was generated using the following semantic patch:
// <smpl>
@@
expression irq;
@@
-synchronize_irq(irq);
free_irq(irq, ...);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 20 Nov 2015 21:59:14 +0000 (22:59 +0100)]
staging: ste_rmi4: avoid unused function warnings
The rmi4 touchscreen driver encloses the power-management
functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume
functions are only really used when CONFIG_PM_SLEEP is also
set, as a frequent gcc warning shows:
ste_rmi4/synaptics_i2c_rmi4.c:1050:12: warning: 'synaptics_rmi4_suspend' defined but not used
ste_rmi4/synaptics_i2c_rmi4.c:1084:12: warning: 'synaptics_rmi4_resume' defined but not used
This changes the driver to remove the #ifdef and instead mark
the functions as __maybe_unused, which is a nicer anyway, as it
provides build testing for all the code in all configurations
and is harder to get wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Wed, 30 Dec 2015 10:58:43 +0000 (11:58 +0100)]
Staging: ste_rmi4: constify synaptics_rmi4_platform_data structures
This synaptics_rmi4_platform_data structure is never modified, so declare
it as const. Others are already const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 28 Dec 2015 15:43:39 +0000 (23:43 +0800)]
staging: rtl8192e: use to_delayed_work
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amadeusz Pawlik [Sat, 19 Dec 2015 15:36:35 +0000 (16:36 +0100)]
staging: rtl8192e: Clean unnecessary blank lines
Fixes a couple of issues detected by checkpatch with regard to blank lines.
Signed-off-by: Amadeusz Pawlik <potrzebye@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Colic [Thu, 3 Dec 2015 12:17:40 +0000 (13:17 +0100)]
staging: rtl8192e: remove unnecessary multiple blank lines
remove multiple blank lines to fix some checkpatch checks
Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean MacLennan [Mon, 16 Nov 2015 00:51:43 +0000 (19:51 -0500)]
staging:rtl8192e: Usage count off by one
The rtllib driver is not calling try_module_get() when loading the
encryption modules. Because of this, you can never remove the module
once you have used it one (i.e. bring up the wireless interface).
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan Elango [Thu, 21 Jan 2016 10:23:46 +0000 (10:23 +0000)]
staging: nvec: replace led_classdev_register
Replace the led_classdev_register() with the platform managed version
devm_led_classdev_register() & henceforth remove the redundant
nvec_paz00_remove() function.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Guinot [Wed, 9 Dec 2015 07:14:06 +0000 (08:14 +0100)]
staging: nvec: fix block comments
This patch fixes a couple of checkpatch warnings about block comments.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SirnamSwetha [Fri, 29 Jan 2016 23:45:40 +0000 (05:15 +0530)]
Staging: board: Blank lines aren't necessary before a close brace
Fix checkpatch.pl issue
CHECK: Blank lines aren't necessary before a close brace
Signed-off-by: SirnamSwetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SirnamSwetha [Fri, 29 Jan 2016 23:37:19 +0000 (05:07 +0530)]
Staging: board: Fix checkpatch.pl issue
This patch fixes the checkpatch issue.
CHECK: Please don't use multiple blank lines
Signed-off-by: SirnamSwetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Byeoungwook Kim [Mon, 1 Feb 2016 05:35:06 +0000 (14:35 +0900)]
staging: rtl8192u: Fix block comments use * on subsequent lines in r8192U_wx.c
clean up checkpatch warning:
WARNING: Block comments use * on subsequent lines
Signed-off-by: Byeoungwook Kim <quddnr145@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yannik Schmidt [Sat, 2 Jan 2016 15:02:28 +0000 (16:02 +0100)]
staging/rtl8192u: fixed typos
Fixed all checkpatch-warnings concerning typos in r8192U_core.c.
Signed-off-by: Yannik Schmidt <yannik.schmidt@thermoscan.de>
Signed-off-by: Lukas Lehnert <lukas.lehnert@web.de>
CC: linux-kernel@i4.cs.fau.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 28 Dec 2015 15:43:38 +0000 (23:43 +0800)]
staging: rtl8192u: use to_delayed_work
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Okash Khawaja [Thu, 17 Dec 2015 20:30:38 +0000 (20:30 +0000)]
staging: rtl8192u: fix large frame size compiler warning
This patch fixes following compiler warning:
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c: In function
‘RxReorderIndicatePacket’:
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c:758:1: warning: the
frame size of 1064 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
It replaces the statically allocated array prxbIndicateArray with
a kmalloc'd one.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin Thomas Claugus [Fri, 11 Dec 2015 02:35:35 +0000 (21:35 -0500)]
Staging: rtl8192u: Fix block comment formatting
Change block comments to comply with checkpatch style
guidelines.
Signed-off-by: Gavin Thomas Claugus <gclaugus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 1 Feb 2016 14:47:03 +0000 (22:47 +0800)]
staging: rtl8712: use list_first_entry_or_null()
Use list_first_entry_or_null() instead of list_empty() + LIST_CONTAINOR()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rakhi Sharma [Fri, 29 Jan 2016 07:07:06 +0000 (12:37 +0530)]
Staging: rtl8712: rtl8712_cmd: Fixed a warning.
Warning:Comparisons should place the constant on the right side of the test
Fixed by placing the comparisions constant on right side of the test.
Signed-off-by: Rakhi Sharma <rakhish1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sat, 30 Jan 2016 14:41:10 +0000 (17:41 +0300)]
staging: rtl8712: memory corruption in wpa_set_encryption()
->KeyMaterial is declared as a 16 byte array, but we only ever allocate
either 5 or 13 bytes of it. The problem is that we memset() all 16
bytes to zero so we're memsetting past the end of the allocated memory.
I fixed this in slightly lazy way, by just allocating 16 bytes. This
works but there is a lot more cleanup you could do to this code if you
wanted. Which is why this code is in staging.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Tanure [Wed, 20 Jan 2016 02:52:13 +0000 (00:52 -0200)]
Staging: rtl8712: Remove unnecessary cast on void pointer
The conversion from void pointer to any other pointer type is guaranteed
by the C programming language.
The semantic patch used to find this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T *)x)->f
|
- (T *)
e
)
Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Mc Guire [Tue, 5 Jan 2016 20:04:13 +0000 (21:04 +0100)]
staging: rtl8712: consolidate kmalloc + memset 0 to kzalloc
This is an API consolidation only. The use of kmalloc + memset to 0
here is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hemmo Nieminen [Thu, 3 Dec 2015 22:11:32 +0000 (00:11 +0200)]
staging: rtl8712: Improve suspend/resume functionality.
Cancel pending URBs during suspend operation to avoid receiving ESHUTDOWN
in read/write completion callbacks while the device is suspended.
Receiving ESHUTDOWN in read/write completion callbacks will cause the
driver to enter a non-functioning "stopped" state from which the driver is
unable to recover without reloading the module.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Dreissig [Sun, 22 Nov 2015 22:02:19 +0000 (20:02 -0200)]
staging: rtl8712: Cleanup _io_ops wrappers
This removes ugly and unnecessary declarations.
Signed-off-by: Mauro Dreissig <mukadr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hornung [Wed, 18 Nov 2015 19:59:17 +0000 (20:59 +0100)]
staging: rtl8712: Remove unused CamelCase define
* Remove unused CamelCase in order to get rid of the corresponding
checkpatch.pl "CHECK: Avoid CamelCase: <IEEE80211_QoS_DATAGRP>"
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hornung [Wed, 18 Nov 2015 19:59:16 +0000 (20:59 +0100)]
staging: rtl8712: Coding style: Fix alignment
* Fix alignment which did not match open parenthesis
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hornung [Wed, 18 Nov 2015 19:59:15 +0000 (20:59 +0100)]
staging: rtl8712: Replace FSF mailing address by URL
* Fix checkpatch.pl output about not including the paragraph
about writing to the Free Software Foundation's mailing address
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hornung [Wed, 18 Nov 2015 19:59:14 +0000 (20:59 +0100)]
staging: rtl8712: Coding style: Fix missing spaces
* Add missing spaces around bitwise OR operation in order to get
rid of checkpatch.pl's "CHECK: spaces preferred around that '|'"
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hornung [Wed, 18 Nov 2015 19:59:13 +0000 (20:59 +0100)]
staging: rtl8712: Coding style: Make use of BIT macro
* Replace all occurences of (1<<x) by BIT(x) in order to get rid
of checkpatch.pl "CHECK" output "Prefer using the BIT macro"
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hornung [Wed, 18 Nov 2015 19:59:12 +0000 (20:59 +0100)]
staging: rtl8712: Coding style: Remove multiple blank lines
* Remove multiple blank lines in order to get rid of checkpatch.pl
"CHECK" output
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Wed, 4 Nov 2015 21:06:58 +0000 (02:36 +0530)]
staging: rtl8712: rtl871x_sta_mgt: Remove wrapper function
Remove wrapper function mfree_sta_priv_lock() that can be replaced by a
direct call to mfree_all_stainfo().
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sat, 30 Jan 2016 05:57:47 +0000 (11:27 +0530)]
staging: rtl8723au: Fixes unnecessary return warning
This patch fixes checkpatch.pl warning in rtw_mlme_ext.c file.
WARNING: void function return statements are not generally useful
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniil Leshchev [Thu, 31 Dec 2015 12:36:42 +0000 (15:36 +0300)]
staging: rtl8723au: use %pM and %ph formatting
use %pM and %ph specifiers instead of placing each byte on stack.
(staging/rtl8723au/TODO)
Signed-off-by: Daniil Leshchev <meleodr@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anatoly Stepanov [Thu, 17 Dec 2015 13:47:36 +0000 (16:47 +0300)]
staging: rtl8723au: change parameter type in rtl8723a_set_rssi_cmd declaration
Previosly the function had the following prototype:
int rtl8723a_set_rssi_cmd(struct rtw_adapter *padapter, u8 *param)
My suggestion here is to modify the prototype this way:
int rtl8723a_set_rssi_cmd(struct rtw_adapter *padapter, u32 param)
We can do this based on the following considerations:
1. rtl8723a_set_rssi_cmd is used only with 32-bit "param" values
2. There's no point in using "u8 *param" until we pass param length
3. As we just read "param", it's ok to pass it by value
Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiading Gai [Wed, 16 Dec 2015 13:24:58 +0000 (08:24 -0500)]
staging: rtl8723au: hal: rtl8723a_hal_init: fixed 4 spelling errors.
Fixed four spelling errors.
Signed-off-by: Jiading Gai <jiading.gai.github@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Mednyy [Wed, 27 Jan 2016 09:04:34 +0000 (12:04 +0300)]
Staging: fbtft: add ssd1325 controller support
That patch adds support for SSD1325 controller.
That is 4bpp grayscale OLED display controller present in several
displays eq: Winstar WEX012864
Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Mednyy [Wed, 27 Jan 2016 09:04:23 +0000 (12:04 +0300)]
Staging: fbtft: add ssd1305 controller support
That patch adds support for SSD1305 controller.
That is monochrome OLED display controller present in several
displays eq: Winstar WEX012864
Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Sun, 27 Dec 2015 13:15:46 +0000 (21:15 +0800)]
staging: fbtft: use to_platform_device()
Use to_platform_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Tue, 22 Dec 2015 16:18:43 +0000 (00:18 +0800)]
staging: fbtft: use to_spi_device
Use to_spi_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:07 +0000 (20:36 +0200)]
staging: fbtft: Remove unused and duplicated defines
This patch makes use of the standard MIPI Display Command Set to remove
some of duplicate defines from the headers.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:35:55 +0000 (20:35 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for hx8340bn
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:06 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for tinylcd
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:05 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for fbtft driver
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:04 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for st7735r
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:03 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for s6d02a1
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:02 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for ili9486
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:01 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for ili9481
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:36:00 +0000 (20:36 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for ili9341
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:35:59 +0000 (20:35 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for ili9340
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:35:58 +0000 (20:35 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for ili9163
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:35:57 +0000 (20:35 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for hx8357d
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes [Sun, 20 Dec 2015 18:35:56 +0000 (20:35 +0200)]
staging: fbtft: Use standard MIPI DCS command defines for hx8353d
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Gilbert [Mon, 14 Dec 2015 19:32:21 +0000 (19:32 +0000)]
Staging: fbtft: Removed commented out/dead code
Deleted various commented out lines that have been replaced by write_reg()
Signed-off-by: Ben Gilbert <gillie59978@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nizam Haider [Sun, 22 Nov 2015 04:09:26 +0000 (09:39 +0530)]
Staging: fbtft: fbtft-core: Removed unnecessary checks
The driver core clears the driver data to NULL after device_release
or on probe failure.
Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Colic [Tue, 17 Nov 2015 12:56:31 +0000 (13:56 +0100)]
staging: fwserial: (coding-style) rewrite comparisons to NULL as "!fifo->data"
Rewrite multiple comparisons to NULL as "!fifo->data"
to fix the last coding style problems of this file.
Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bogicevic Sasa [Fri, 13 Nov 2015 13:55:47 +0000 (14:55 +0100)]
drivers:staging:fwserial Fix No space is necessary after a cast
This fixes all "No space is necessary after a cast" messages
Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Tue, 2 Feb 2016 19:38:03 +0000 (01:08 +0530)]
Staging:octeon:removed blank line after {
Removed blank line after curly braces.
Found using checkpatch.pl.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saatvik Arya [Sun, 3 Jan 2016 17:12:40 +0000 (22:42 +0530)]
drivers: staging: octeon-usb: octeon-hcd.c: fixed coding style related warnings
fixed coding style warnings related to comment blocks
Signed-off-by: Saatvik Arya <aryasaatvik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luuk Paulussen [Tue, 22 Dec 2015 20:51:14 +0000 (09:51 +1300)]
staging: octeon: Fix logic for waking octeon ethernet tx queue.
Only wake tx queue when driver queue is back within bounds.
The logic here was just reenabling the queue when any buffers had been
freed. the queue was stopped whenever the length exceeded 1000
(MAX_OUT_QUEUE_DEPTH), but then was essentially immediately started again.
On a congested link, the queue length would just keep increasing up to
around 8000 (for average size packets), at which point the hardware would
start refusing the packets and they would begin to be dropped.
This prevented the qdisc layer from effectively managing and prioritising
packets, as essentially all packets were being allowed into the driver
queue and then were being dropped by the hardware.
This change only restarts the queue if the length is less than 1000
(MAX_OUT_QUEUE_DEPTH).
Reviewed-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hamish Martin [Mon, 21 Dec 2015 21:23:58 +0000 (10:23 +1300)]
staging: octeon-ethernet: fix TCP/UDP checksum calc
If the network portion of a frame is preceded by more than 14 bytes of
data, the checksum calculated in the HW is done over the wrong data and
is put in the wrong place.
In our use case an Octeon ethernet controller is connected to a Broadcom
switch chip. Extra data is included in the frame prior to egressing the
Octeon ethernet (i.e. 4 bytes of an 802.1Q tag, 4 bytes of a proprietary
BCM tag later stripped by the switch chip). This extra data causes the
checksum calculation to be incorrect.
The fix in this patch is to make use of the network header offset of the
skb. This enables the checksum to be calculated correctly.
This has been tested in both the configuration with the switch chip in
the egress path (as described above) and in a simple connection direct
to the wire.
Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Reviewed-by: Tim Beale <tim.beale@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:29 +0000 (16:03 -0600)]
staging: fsl-mc: Added MSI support to the MC bus driver
Initialize/Cleanup ITS-MSI support for the MC bus driver at driver
init/exit time. Associate an MSI domain with each DPAA2 child device.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:28 +0000 (16:03 -0600)]
staging: fsl-mc: Added DPRC interrupt handler
The interrupt handler for DPRC IRQs is added. DPRC IRQs are
generated for hot plug events related to DPAA2 objects in a given
DPRC. These events include, creating/destroying DPAA2 objects in
the DPRC, changing the "plugged" state of DPAA2 objects and moving
objects between DPRCs.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:27 +0000 (16:03 -0600)]
staging: fsl-mc: Fixed bug in dprc_probe() error path
Destroy mc_io in error path in dprc_probe() only if the mc_io was
created in this function.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:26 +0000 (16:03 -0600)]
staging: fsl-mc: set MSI domain for DPRC objects
THE MSI domain associated with a root DPRC object is
obtained form the device tree. Child DPRCs inherit
the parent DPRC MSI domain.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:25 +0000 (16:03 -0600)]
staging: fsl-mc: Populate the IRQ pool for an MC bus instance
Scan the corresponding DPRC container to get total count
of IRQs needed by all its child DPAA2 objects. Then,
preallocate a set of MSI IRQs with the DPRC's ICID
(GIT-ITS device Id) to populate the the DPRC's IRQ pool.
Each child DPAA2 object in the DPRC and the DPRC object itself
will allocate their necessary MSI IRQs from the DPRC's IRQ pool,
in their driver probe function.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:24 +0000 (16:03 -0600)]
staging: fsl-mc: Changed DPRC built-in portal's mc_io to be atomic
The DPRC built-in portal's mc_io is used to send commands to the MC
to program MSIs for MC objects. This is done by the
fsl_mc_msi_write_msg() callback, which is invoked by the generic MSI
layer with interrupts disabled. As a result, the mc_io used in
fsl_mc_msi_write_msg needs to be an atomic mc_io.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:23 +0000 (16:03 -0600)]
staging: fsl-mc: Extended MC bus allocator to include IRQs
All the IRQs for DPAA2 objects in the same DPRC must use
the ICID of that DPRC, as their device Id in the GIC-ITS.
Thus, all these IRQs must share the same ITT table in the GIC.
As a result, a pool of IRQs with the same device Id must be
preallocated per DPRC (fsl-mc bus instance). So, the fsl-mc
bus object allocator is extended to also provide services
to allocate IRQs to DPAA2 devices, from their parent fsl-mc bus
IRQ pool.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:22 +0000 (16:03 -0600)]
staging: fsl-mc: Added GICv3-ITS support for FSL-MC MSIs
Added platform-specific MSI support layer for FSL-MC devices.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:21 +0000 (16:03 -0600)]
staging: fsl-mc: Added generic MSI support for FSL-MC devices
Created an MSI domain for the fsl-mc bus-- including functions
to create a domain, find a domain, alloc/free domain irqs, and
bus specific overrides for domain and irq_chip ops.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:20 +0000 (16:03 -0600)]
fsl-mc: msi: Added FSL-MC-specific member to the msi_desc's union
FSL-MC is a bus type different from PCI and platform, so it needs
its own member in the msi_desc's union.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Wed, 6 Jan 2016 22:03:19 +0000 (16:03 -0600)]
irqdomain: Added domain bus token DOMAIN_BUS_FSL_MC_MSI
Since an FSL-MC bus is a new bus type that is neither PCI nor
PLATFORM, we need a new domain bus token to disambiguate the
IRQ domain for FSL-MC MSIs.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Mon, 1 Feb 2016 19:31:28 +0000 (01:01 +0530)]
Staging:speakup:add space around '|'
Fix checkpatch.pl check:CHECK: spaces preferred around that '|'.
Add spaces around operands to fix these warnings.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Tue, 15 Dec 2015 15:29:32 +0000 (23:29 +0800)]
staging: wlan-ng: use list_for_each_entry*
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bogicevic Sasa [Mon, 14 Dec 2015 14:25:59 +0000 (06:25 -0800)]
drivers:staging:wlan-ng Fix space preferred around that messages
This fixes all "space preferred around that ..." messages from
checkpatch.pl
Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bogicevic Sasa [Mon, 14 Dec 2015 14:11:18 +0000 (06:11 -0800)]
drivers:staging:wlan-ng Fix all no space necesarry after a cast
This fixes all messages "no space necesarry after a cast" in cfg80211.c
file
Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin O'Leary [Mon, 23 Nov 2015 17:23:36 +0000 (09:23 -0800)]
staging: wlan-ng: Fixed more comments
Fixed more comment issues
Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin O'Leary [Mon, 23 Nov 2015 17:08:18 +0000 (09:08 -0800)]
staging: wlan-ng: fixed a comment
Fixed a comment style issue.
Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Colic [Mon, 23 Nov 2015 13:25:05 +0000 (14:25 +0100)]
staging: wlan-ng: (coding style) remove unnecessary blank line before "}"
Fix checkpatch checks: "Blank lines aren't necessary before a close brace '}' "
Remove two unnecessary blank lines.
Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin O'Leary [Mon, 9 Nov 2015 06:44:20 +0000 (22:44 -0800)]
Staging: wlan-ng: p80211wep: fixed a block comment style issue
Fixed a comment style issue.
Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pranjal Bhor [Mon, 18 Jan 2016 19:35:13 +0000 (01:05 +0530)]
staging: wlan-ng: NULL comparisons made elegant
Elegance added for NULL comparisons
Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pranjal Bhor [Mon, 18 Jan 2016 19:34:56 +0000 (01:04 +0530)]
staging: wlan-ng: Open parenthesis alignment style fix
Alignment of lines matched with open parenthesis
Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pranjal Bhor [Mon, 18 Jan 2016 19:34:41 +0000 (01:04 +0530)]
staging: wlan-ng: Coding style fix for casting operation
Removed spaces after casting operating
Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pranjal Bhor [Mon, 18 Jan 2016 19:34:25 +0000 (01:04 +0530)]
staging: wlan-ng: Removed blank lines after braces
Blank lines before closing braces and after opening braces
have been removed.
Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pranjal Bhor [Mon, 18 Jan 2016 19:34:09 +0000 (01:04 +0530)]
staging: wlan-ng: Logical continuation fixes
Logical continuation coding style issues fixed while
condition checking
Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pranjal Bhor [Mon, 18 Jan 2016 19:33:49 +0000 (01:03 +0530)]
staging: wlan-ng: Fixed block comments coding style issue
All block comment lines now begin with "*" and end with "*/"
on a new line.
Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
maomao xu [Thu, 31 Dec 2015 07:20:53 +0000 (15:20 +0800)]
Staging: vt6656: Fixed multiple commenting codig style issues.
Fixed multiple comment blocks that didn't comply with the
kernels coding style.
Signed-off-by: maomao xu <albert008.xu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Lysanov [Fri, 18 Dec 2015 08:06:24 +0000 (11:06 +0300)]
drivers:staging:vt6656: Fix coding style issues
This patch fixes the following issues reported by checkpatch.pl:
- code indent should use tabs where possible
Signed-off-by: Sergey Lysanov <lysanovsergey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Tulia [Sat, 21 Nov 2015 12:36:47 +0000 (15:36 +0300)]
staging: vt6656: fix definitions of DEVICE_FLAGS_* flags
test_bit and set_bit take the bit number to operate on, rather than a
mask. This patch fixes the DEVICE_FLAGS_* definitions so that they represent
the bit index in priv->flags as opposed to the mask returned by the
BIT macro.
Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:22 +0000 (09:07 +0000)]
staging: vt6655: mac.c replace void __iomem * with struct vnt_private
Moving void __iomem down one level in the following functions
MACbIsRegBitsOn
MACbIsRegBitsOff
MACbIsIntDisable
MACvSetShortRetryLimit
MACvSetLongRetryLimit
MACvGetLongRetryLimit
MACvSetLoopbackMode
MACvSaveContext
MACvRestoreContext
MACbSoftwareReset
MACbSafeSoftwareReset
MACbSafeRxOff
MACbSafeTxOff
MACbSafeStop
MACbShutdown
MACvInitialize
MACvSetCurrRx0DescAddr
MACvSetCurrRx1DescAddr
MACvSetCurrTXDescAddr
MACvSetCurrTx0DescAddrEx
MACvSetCurrAC0DescAddrEx
MACvSetCurrSyncDescAddrEx
MACvSetCurrATIMDescAddrEx
MACvTimer0MicroSDelay
MACvOneShotTimer1MicroSec
MACvSetMISCFifo
MACbPSWakeup
MACvSetKeyEntry
MACvDisableKeyEntry
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:21 +0000 (09:07 +0000)]
staging: vt6655: PSbIsNextTBTTWakeUp Rename bWakeUp wake_up
Removing camel case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:20 +0000 (09:07 +0000)]
staging: vt6655: rf.c/h Replace DeviceContext with vnt_private
Removing void and including device.h for power.h
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:19 +0000 (09:07 +0000)]
staging: vt6655: power.c replace pDevice with priv
Removing camel case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:18 +0000 (09:07 +0000)]
staging: vt6655: rf.c rename bResult ret.
Removing camel case and reflecting return value.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:17 +0000 (09:07 +0000)]
staging: vt6655: set_channel replace bResult with ret
Removing camel case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:16 +0000 (09:07 +0000)]
staging: vt6655: set_channel replace void handler.
Replace with struct vnt_private.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 22 Nov 2015 09:07:15 +0000 (09:07 +0000)]
staging: vt6655: channel.c replace pDevice with priv
Removing camel case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan Elango [Wed, 20 Jan 2016 12:52:58 +0000 (12:52 +0000)]
staging: rtl8188eu: use eth_broadcast_addr() in place of memset
Replace the memset of array to broadcast address 0xFF by using the
eth_broadcast_addr() API
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 1 Feb 2016 14:37:13 +0000 (22:37 +0800)]
staging: rtl8188eu: use list_first_entry_or_null()
Use list_first_entry_or_null() instead of list_empty() + container_of()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Thu, 10 Dec 2015 15:43:55 +0000 (17:43 +0200)]
staging: rtl8188eu: print OUI with %*ph
There is no need to pass each byte as a parameter when printing values in hex
format. We rather use %*ph specifier for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-starfive.git / log