Marek Vasut [Mon, 28 Aug 2017 12:12:54 +0000 (14:12 +0200)]
ARM: rmobile: Drop board_mmc_init
The board_mmc_init() is no longer invoked when DM is used, so move
all the pinmux config into board_init() instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 28 Aug 2017 12:12:34 +0000 (14:12 +0200)]
ARM: rmobile: Replace CONFIG_RAVB with CONFIG_RENESAS_RAVB in boards
The configuration option name is the later, so replace usage of
CONFIG_RAVB in board files with CONFIG_RENESAS_RAVB , otherwise
the RAVB pinmux is not set and ethernet does not work.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:50 +0000 (17:13 +0200)]
ARM: rmobile: Enable MMC and USB DM on ULCB
Enable the MMC and USB DM on the board since it's the modern method
and now supported by the drivers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:49 +0000 (17:13 +0200)]
ARM: rmobile: Enable MMC and USB DM on Salvator-X
Enable the MMC and USB DM on the board since it's the modern method
and now supported by the drivers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:48 +0000 (17:13 +0200)]
ARM: rmobile: Remove SH SDHI probing from ULCB board
Drop the SH SDHI bit from the board since SD now probes from DT instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:47 +0000 (17:13 +0200)]
ARM: rmobile: Remove SH SDHI probing from Salvator-X board
Drop the SH SDHI bit from the board since SD now probes from DT instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:46 +0000 (17:13 +0200)]
ARM: rmobile: Remove Serial SH probing from ULCB board
Drop the Serial SH bit from the board since UART now probes from DT instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:45 +0000 (17:13 +0200)]
ARM: rmobile: Remove Serial SH probing from Salvator-X board
Drop the Serial SH bit from the board since UART now probes from DT instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:44 +0000 (17:13 +0200)]
ARM: rmobile: Remove RAVB probing from ULCB board
Drop the RAVB bit from the board since RAVB now probes from DT instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:43 +0000 (17:13 +0200)]
ARM: rmobile: Remove RAVB probing from Salvator-X board
Drop the RAVB bit from the board since RAVB now probes from DT instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:42 +0000 (17:13 +0200)]
ARM: rmobile: Enable HUSH parser
The HUSH parser was disabled somewhere along the way, reenable it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Alexandru Gagniuc <alex.g@adaptrum.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:41 +0000 (17:13 +0200)]
ARM: rmobile: Enable KSZ90X1 PHY on Salvator-X
Commit
da3b9e7fd6a1 (Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig)
broke ethernet support on R8A779x Salvator-X boards by disabling the
KSZ90x1 PHY in Kconfig. Reenable it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Alexandru Gagniuc <alex.g@adaptrum.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:40 +0000 (17:13 +0200)]
ARM: rmobile: Add u-boot, dm-pre-reloc to clock nodes on Gen3
We need the clock available very early, add the u-boot,dm-pre-reloc
DT property on those nodes, so they come up very in the process.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sun, 20 Aug 2017 15:13:39 +0000 (17:13 +0200)]
clk: rmobile: Split R8A7795 and R8A7796 core clock tables
The R8A7795 and R8A7796 tables use different constants to identify
clock in DT, so split the tables and use the correct constants on
R8A7795. This fixes UART clock misconfiguration on R8A7795.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tom Rini [Tue, 22 Aug 2017 12:20:02 +0000 (08:20 -0400)]
fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long
Otherwise:
drivers/usb/gadget/f_fastboot.c:564:32: warning: format "%lx" expects
argument of type "long unsigned int", but argument 3 has type "unsigned
int" [-Wformat=]
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 21 Aug 2017 11:17:15 +0000 (07:17 -0400)]
Merge git://www.denx.de/git/u-boot-marvell
Tom Rini [Mon, 21 Aug 2017 11:16:56 +0000 (07:16 -0400)]
Merge git://git.denx.de/u-boot-usb
Tom Rini [Mon, 21 Aug 2017 11:16:16 +0000 (07:16 -0400)]
Merge git://git.denx.de/u-boot-uniphier
- Fix unmet direct dependencies warning
- Remove old sLD3 SoC support
- Update reset data
- Add dr_mode DT property to avoid warning
Chris Packham [Thu, 17 Aug 2017 10:27:03 +0000 (22:27 +1200)]
ARM: mvebu: set correct mem_size for db-88f6820-amc
The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB
DRAM. Update the board_topology_map to reflect the correct
configuration.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Lukasz Majewski [Thu, 17 Aug 2017 21:10:49 +0000 (23:10 +0200)]
doc: license: Add license header to the README.dfutftp file
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tom Rini [Tue, 15 Aug 2017 01:00:44 +0000 (21:00 -0400)]
fb_mmc.c: Correct blk_dread() return value checks
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere). Correct this check.
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 10 Jun 2017 13:15:37 +0000 (09:15 -0400)]
common/fb_mmc.c: Fix warnings about casts
When building the flash zImage code on aarch64 we see warnings about
pointer size casts. Use uintptr_t instead to correct these.
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-By: Sam Protsenko <semen.protsenko@linaro.org>
John Keeping [Mon, 19 Sep 2016 09:59:40 +0000 (10:59 +0100)]
fastboot: avoid printing invalid data
There is no guarantee that commands are null-terminated in the USB
request buffer, so limit the length of data that is printed.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Steve Rae <steve.rae@raedomain.com>
Peter Chubb [Thu, 8 Sep 2016 20:51:57 +0000 (20:51 +0000)]
Fix fastboot boot address
Fastboot loads an image at CONFIG_FASTBOOT_BUF_ADDR, but currently
tells do_bootm() to look for an image at $loadaddr. This breaks if
CONFIG_FASTBOOT_BUF_ADDR is different from the current user-set
loadaddr.
Instead, tell do_bootm() to pick up the image where it was laoded.
Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Bin Meng [Wed, 9 Aug 2017 07:21:54 +0000 (00:21 -0700)]
usb: ehci: Convert CONFIG_USB_EHCI_PCI to Kconfig
This converts CONFIG_USB_EHCI_PCI to a Kconfig option, and updates
all boards that use it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 20 Aug 2017 10:45:15 +0000 (04:45 -0600)]
env: Replace all open-coded gd->env_valid values with ENV_ flags
Some of these were missed in the conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 20 Aug 2017 10:45:14 +0000 (04:45 -0600)]
env: Allow env_load() to detect errors
Now that we have errors available in the environment driver's load()
method, check the return valid.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sun, 20 Aug 2017 02:27:57 +0000 (22:27 -0400)]
env: Correct case of no sub-init function
With the change to the environment code to remove the common init stage
of pointing to the default environment and setting it as valid, combined
with the change to switch gd->env_valid from 0/1/2 to an enum we now
must set env_valid to one of the enum values rather than an int. And in
this case, not only was setting it to an int wrong, it was now the wrong
value. Finally, in the case of ENV_IS_NOWHERE we must still say that
our envionrment is invalid after init for things to continue to
function.
Fixes:
7938822a6b75 ("env: Drop common init() functions")
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v3:
- Actually include changes for env/nowhere.c
Masahiro Yamada [Sun, 13 Aug 2017 00:01:17 +0000 (09:01 +0900)]
ARM: dts: uniphier: add dr_mode property to dwc3 node
Since commit
576e3cc700c5 ("usb: host: xhci-dwc3: Add dual role mode
support from DT"), warning is displayed if dr_mode is not specified.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 13 Aug 2017 00:01:16 +0000 (09:01 +0900)]
reset: uniphier: refactor reset data and add NAND/eMMC reset lines
- Merge sys_reset data of LD4, Pro4, sLD8 and Pro5
- Merge sys_reset data of LD11 and LD20
- Use primitive UNIPHIER_RESETX() macro because bit assignments for
system reset will be changed for every SoC in the future
- Add NAND and eMMC resets
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 13 Aug 2017 00:01:15 +0000 (09:01 +0900)]
Revert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"
This reverts commit
82d075e79fa509ffb8ecd8dd2dc216929d6e8289.
Commit
82d075e79fa5 ("ARM: uniphier: fix ROM boot mode for PH1-sLD3")
was a workaround for sLD3. Now the sLD3 SoC support has been removed.
Revert it to allow to simplify the init code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 13 Aug 2017 00:01:14 +0000 (09:01 +0900)]
Revert "ARM: uniphier: move lowlevel debug init code after page table switch"
This reverts commit
bcc51c1512a3deb6a9fdd37362c6dde32ad3da23.
Commit
bcc51c1512a3 ("ARM: uniphier: move lowlevel debug init code
after page table switch") was intended to support lowlevel debug for
sLD3. Now the sLD3 SoC support has been removed.
Revert it to allow to enable lowlevel debug earlier.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 13 Aug 2017 00:01:13 +0000 (09:01 +0900)]
ARM: uniphier: remove sLD3 SoC support
This SoC is too old. It is difficult to maintain any longer.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 20 Aug 2017 13:59:36 +0000 (22:59 +0900)]
clk: uniphier: fix unmet direct dependencies warning
Since commit
f0776a551764 ("spl: dm: Kconfig: SPL_CLK depends on
SPL_DM"), the following warning is displayed:
$ make uniphier_v8_defconfig
warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects
SPL_CLK which has unmet direct dependencies (CLK && SPL_DM)
While I am here, I am removing the prompt to make it user-unconfigurable
option so that "select CLK_UNIPHIER" can be omitted.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Anatolij Gustschin [Fri, 18 Aug 2017 15:58:51 +0000 (17:58 +0200)]
Fix 'notes' typos
s/notes/nodes
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Andy Shevchenko [Fri, 18 Aug 2017 10:14:47 +0000 (13:14 +0300)]
env: Sort selection of default choices
It would be easier to catch out which platform is using which default.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Heiko Schocher [Wed, 16 Aug 2017 07:47:45 +0000 (09:47 +0200)]
arm, at91: fix taurus board
since commit:
b529993e0222 "spl: add hierarchical defaults for SPL_LDSCRIPT"
taurus board stopped working. Use the ldscript from
arch/arm/cpu/u-boot-spl.lds (as before this patch) fixed it.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Thomas Petazzoni [Tue, 15 Aug 2017 21:11:02 +0000 (23:11 +0200)]
common/board_f.c: remove CONFIG_SYS_GENERIC_GLOBAL_DATA
CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or
platform, so support for it can be dropped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Peter Griffin [Tue, 15 Aug 2017 16:18:16 +0000 (17:18 +0100)]
ARM: hisilicon: hikey: Fix eMMC with latest ATF & U-Boot
ATF can leave the MMC IP in a state where U-Boot mmc driver
can't enumerate the eMMC.
This patch provides a mmc0_reset_clk() function like we
already so do sd card controller which resets the IP
when entering U-Boot.
With this patch applied eMMC partitions are successfully
enumerated again.
=> mmc dev 0
switch to partitions #0, OK
mmc0(part 0) is current device
=> mmc part
Partition Map for MMC device 0 -- Partition Type: EFI
Part Start LBA End LBA Name
Attributes
Type GUID
Partition GUID
1 0x00000800 0x00000fff "vrl"
attrs: 0x0000000000000000
type:
ebd0a0a2-b9e5-4433-87c0-
68b6b72699c7
guid:
496847ab-56a1-4cd5-a1ad-
47f4acf055c9
2 0x00001000 0x000017ff "vrl_backup"
attrs: 0x0000000000000000
type:
ebd0a0a2-b9e5-4433-87c0-
68b6b72699c7
guid:
61a36fc1-8efb-4899-84d8-
b61642efa723
3 0x00001800 0x00001fff "mcuimage"
<snip>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Tom Rini [Tue, 15 Aug 2017 01:02:08 +0000 (21:02 -0400)]
fs/fat: Correct blk_dread() return value check
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere). Correct this check.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 15 Aug 2017 01:01:30 +0000 (21:01 -0400)]
spl: spl_mmc.c Correct blk_dread() return value check
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere). Correct this check.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 15 Aug 2017 00:58:50 +0000 (20:58 -0400)]
cmd/read.c: Fix checking blk_dread return value
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere). Correct this check.
Reported-by: Coverity (CID: 166335)
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 15 Aug 2017 00:42:27 +0000 (20:42 -0400)]
mtdparts: Fix various issues reported by Coverity
Now that sandbox is building cmd/mtdparts.c Coverity has looked at the
code and found a number of issues. In index_partitions() it is possible
that part will be NULL, so re-work the checks and debug statements to
take this into account. We have a number of string buffers that we
print to in the exact size of, and use string functions on, so we need
to ensure they are large enough to be NULL terminated. In
device_parse() it is not possible for num_partitions to be 0 (we would
have hit a different error first) so remove logically dead code.
Finally, in parse_mtdparts() if we have an error we need to free the
memory allocated to dev.
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Coverity (CID: 166334, 166333, 166332, 166329, 166328)
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 14 Aug 2017 20:38:07 +0000 (16:38 -0400)]
hash: Compile only hardware or software versions of SHA algorithms
Commit
089df18bfe9d ("lib: move hash CONFIG options to Kconfig") moved
CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and
CONFIG_SHA_PROG_HW_ACCEL config options to Kconfig. So in the case of
SPL, CONFIG_SPL_HASH_SUPPORT enables CONFIG_SHA1 and CONFIG_SHA256 which
enables SHA SW library by default. But in the case of platforms with
SHA HW library support, SHA SW library becomes redundant and increases
size of SPL by approx 18K. Rework the code so that we have named
members and only have either software or hardware versions of the
algorithm, depending on the relevant config options. Update the comment
around hash_algo to reflect this as well.
Reported-by: Sumit Garg <sumit.garg@nxp.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
Clément Bœsch [Mon, 14 Aug 2017 06:59:11 +0000 (08:59 +0200)]
Makefile: honor PYTHON configuration properly
On some systems `python` is `python3` (for instance, Archlinux). The
`PYTHON` variable can be used to point to `python2` to have a successful
build.
The use of `PYTHON` is currently limited in the Makefile and needs to be
extended in other places:
First, pylibfdt is required to be a Python 2 binding (binman imports
pylibfdt and is only compatible Python 2), so its setup.py needs to be
called accordingly. An alternative would be to change the libfdt
setup.py shebang to python2, but the binding is actually portable. Also,
it would break on system where there is no such thing as `python2`.
Secondly, the libfdt import checks need to be done against Python 2 as
well since the Python 2 compiled modules (in this case _libdft.so) can
not be imported from Python 3.
Note on the libfdt imports: "@if ! PYTHONPATH=tools $(PYTHON) -c 'import
libfdt'; then..." is probably simpler than the currently sub-optimal
pipe.
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
Tom Rini [Sun, 20 Aug 2017 02:11:05 +0000 (22:11 -0400)]
Merge git://git.denx.de/u-boot-video
xypron.glpk@gmx.de [Sun, 30 Jul 2017 19:59:23 +0000 (21:59 +0200)]
lcd: avoid possible NULL dereference
Do not dereference bmp before the check if it is NULL.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tom Rini [Fri, 18 Aug 2017 22:24:58 +0000 (18:24 -0400)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
EFI Fixes for 2017.09:
- Fix GOP w/o display
- Fix LocateHandle
- Fix exit return value truncation
- Fix missing EFIAPI in efi_locate_handle (for x86)
Tom Rini [Fri, 18 Aug 2017 22:24:36 +0000 (18:24 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc
Tom Rini [Fri, 18 Aug 2017 22:24:08 +0000 (18:24 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-coldfire
Tom Rini [Fri, 18 Aug 2017 22:23:58 +0000 (18:23 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-rockchip
Kever Yang [Thu, 17 Aug 2017 07:17:36 +0000 (15:17 +0800)]
rockchip: rk322x: pinctrl: fix IO MASK error on sdcard pin
Fix the IOMUX setting for SDcard CMD pin at the same time.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Kever Yang [Thu, 17 Aug 2017 07:17:35 +0000 (15:17 +0800)]
rockchip: rk322x: pinctrl: using compatible name same with dts
The dts from kernel is using rk3228-pinctrl as compatible name,
need to sync with it to make the driver work.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Kever Yang [Thu, 3 Aug 2017 12:07:45 +0000 (20:07 +0800)]
rockchip: rk322x: update MACRO for mmc clksel reg
The description for eMMC/SDIO/SDMMC src is not correct,
update the CRU_CLKSEL11_CON value definition according to TRM.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Kever Yang [Fri, 21 Jul 2017 10:21:07 +0000 (18:21 +0800)]
rockchip: rk322x: update dram bank size
The DRAM start address is not 0, so need to update the last bank size
as:
DRAM start addr + DRAM_SIZE - last bank start addr
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Philipp Tomsich [Wed, 16 Aug 2017 17:24:02 +0000 (19:24 +0200)]
rockchip: rk3399: spl: remove unused header inclusion
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the
'#include'-statement.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Kever Yang [Wed, 9 Aug 2017 10:51:30 +0000 (18:51 +0800)]
rockchip: dts: rk3399-evb: remove redundant gmac node
There are two same gmac node, remove one.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
xypron.glpk@gmx.de [Thu, 17 Aug 2017 16:57:36 +0000 (18:57 +0200)]
efi_loader: do not cast return value in EFI_EXIT
UEFI API functions have different return types.
Some return a value of type EFI_STATUS other don't.
We therefore should not cast the return value of EFI_EXIT
to another type than the expression passed to EFI_EXIT.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bin Meng [Wed, 9 Aug 2017 07:21:00 +0000 (00:21 -0700)]
mmc: Support generic PCI SD host controller
This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of
individual vendor id & device id pair to support generic PCI SD host
controller.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Angelo Dureghello [Sun, 6 Aug 2017 23:17:18 +0000 (01:17 +0200)]
m68k: add board stmark2, mcf5441x based
Sysam stmark2 board is a generic and fully (hw and sw) open board, with
a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card
as non volatile memories, and a wifi module included on-board.
The board is actually used mainly for Coldfire custodian testing activity
related to the mcf5441x Coldfire family.
For further information please see: http://sysam.it/cff_stmark2.html
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes in v2:
- remove CMD_REGINFO
- add board information in commit message
Angelo Dureghello [Sun, 14 May 2017 22:17:48 +0000 (00:17 +0200)]
m68k: mcf5445x: allow CS0 to be undefined
On some boards, CONFIG_SYS_CS0_BASE can be undefined, since
CS0 is not connected to any signal.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Angelo Dureghello [Wed, 31 May 2017 19:32:48 +0000 (21:32 +0200)]
m68k: fix cache.c for Coldfire V4E
- fix cache.c CONFIG_CF_V4e to CONFIG_CF_V4E
- fix cache.c to properly enable/disable cache for V4E
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Angelo Dureghello [Sun, 14 May 2017 19:42:27 +0000 (21:42 +0200)]
m68k: mcf5445x: move early ddr init as board-specific
For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init
is required. This patch moves this ddr/sdram early initalization
away from start.S (to be board related).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Philipp Tomsich [Thu, 17 Aug 2017 08:06:59 +0000 (10:06 +0200)]
spl: fix Makefile for NOR, XIP and YMODEM
During the the conversion to $(SPL_TPL_), the SPL_ fragment was
left over for the NOR, XIP and YMODEM boot methods in SPL, making
these unselectable.
This commit fixes this by dropping the spurious 'SPL_' fragment
from each line.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: Bo Shen <voice.shen@gmail.com>
Fixes: f94e643 (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)
Kever Yang [Tue, 1 Aug 2017 01:40:04 +0000 (09:40 +0800)]
rockchip: dts: rk3399-firefly: update gmac parameter
Update the tx_delay and rx_delay to match the timing for
rk3399-firefly board to improve the stability of gmac data
transfer.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Angelo Dureghello [Tue, 1 Aug 2017 12:27:10 +0000 (14:27 +0200)]
cmd: mmc: add mmc partconf read capability
This patch allows to show the EXT_CSD[179] partition_config
register info, just by specifying the dev param:
U-Boot> mmc partconf 0
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x0
BOOT_PARTITION_ENABLE: 0x0
PARTITION_ACCESS: 0x0
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Sat, 29 Jul 2017 17:35:31 +0000 (11:35 -0600)]
dm: mmc: Drop CONFIG_DM_MMC_OPS
All boards which use DM_MMC have now been converted to use DM_MMC_OPS.
Drop the option and good riddance.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:30 +0000 (11:35 -0600)]
dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS
This should depend on SPL_DM_MMC, not SPL_DM. For it and update the only
affected board's defconfig.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:29 +0000 (11:35 -0600)]
dm: imx: Move i.MX devices to use CONFIG_DM_MMC_OPS
Now that the driver supports it, move these boards over to use driver
model fully for MMC.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:28 +0000 (11:35 -0600)]
dm: imx: cm_fx6: Enable more driver model support
Enable driver model for MMC (including BLK), SATA and USB. Note that USB
does not yet work correctly since the nodes are disabled. Hopefully this
can be resolved by the maintainer.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:27 +0000 (11:35 -0600)]
dm: imx: cm_fx6: Add MMC support for CONFIG_BLK
When CONFIG_BLK is enabled our weak board_mmc_init() will not be called.
Since there is no clock driver for MX6 yet, we must manually enable the
clocks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:26 +0000 (11:35 -0600)]
dm: imx: cm_fx6: Add device tree for cm_fx6
Add this file so we can use device-tree control for cm_fx6. It comes from
linux 4.12.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:25 +0000 (11:35 -0600)]
dm: imx: cm_fx6: Support driver model for SATA
Add support for using driver model for SATA with the cm_fx6 board. The old
code remains for now to permit testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:24 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Update to support MMC operations
This driver does not currently support CONFIG_DM_MMC_OPS. Update it to
fully convert it to driver model.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:23 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Update to support livetree
Update this driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:22 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()
We want to use fsl_esdhc_init() with driver model. Move the mmc_init() out
of this function so that we can use it for our common init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:21 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Set up platform data
With driver model we want to store the mmc and configuration structure in
platform data. Set up structure up and use it for non-DM as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:20 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Detect init failure
Since esdhc_init_common() can fail it should return an error code. Update
this and also adjust the timeout mechanism to use get_timer(), which is a
more common approach.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:19 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Detect reset failure
Since esdhc_reset() can fail it should return an error code. Update this
and also adjust the timeout mechanism to use get_timer(), which is a more
common approach.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:18 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Set up common versions of operations
Driver model wants to use the core functions in this file but accesses the
driver-private data in a different way. Move the code into new 'common'
functions and set up stubs to call these. Also sort the operations into
alphabetical order for consistency.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:17 +0000 (11:35 -0600)]
dm: mmc: fsl_esdhc: Pass private data to internal functions
With driver model we will not use mmc->priv to access driver-private data.
To accomodate this, update internal functions so that we can pass the
private data directly. This will allow the caller to obtain it as it
prefers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:16 +0000 (11:35 -0600)]
dm: sata: dwc_ahsata: Add support for driver model
Update this driver to support driver model. This involves implementing the
AHCI operations and reusing existing common code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:15 +0000 (11:35 -0600)]
dm: sata: Update the AHCI uclass to support operations
At present the AHCI uclass is just a shell and we still use the global
functions to access SATA. Fix this by adding operations to the uclass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:14 +0000 (11:35 -0600)]
dm: sata: imx: Allow driver model to be used for sata
Update the sata call to work with driver model.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:13 +0000 (11:35 -0600)]
dm: sata: Support driver model with the 'sata' command
Update this command to support driver model. This has a different way of
starting and stopping SATA.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:12 +0000 (11:35 -0600)]
dm: sata: dw_sata: Set up common versions of operations
Driver model wants to use the core functions in this file but accesses the
uclass-private data in a different way. Move the code into new 'common'
functions and set up stubs to call these.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:11 +0000 (11:35 -0600)]
dm: sata: dw_sata: More ahci_init_one() futher down
This function will not be used with driver model and it relates to the
other exported functions. Move it down next to them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:10 +0000 (11:35 -0600)]
dm: sata: dw_sata: Drop is_ready
This variable is set but never used. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:09 +0000 (11:35 -0600)]
dm: sata: dw_sata: Rename the dwc_ahsata private header
Rename dwc_ahsata.h to indicate that it is a private header file. We plan
to create another header with some public functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:08 +0000 (11:35 -0600)]
dm: sata: dw_sata: Sort #include directives
Sort the header file inclusions into the correct order.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:07 +0000 (11:35 -0600)]
dm: sata: dw_sata: Drop unnecessary brackets
There is a strange &(var) coding style in this driver. Adjust it to use
&var instead, which is more usual.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:06 +0000 (11:35 -0600)]
dm: sata: dw_sata: Pass uc_priv to internal functions
With driver model sata_dev_desc[] does not exist. We still want to use the
common code of this driver so update it to pass struct ahci_uc_priv * to
each of these functions, instead of an integer which must be looked up in
sata_dev_desc[].
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:05 +0000 (11:35 -0600)]
dm: sata: dw_sata: Drop unnecessary casts
Most of the casts in this driver are not necessary. With driver model we
do not cast from void *. Update the driver to follow this rule.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:04 +0000 (11:35 -0600)]
dm: sata: dw_sata: Rename 'probe_ent' to uc_priv
With driver model this becomes uclass-private data. Rename the parameter
varable to reflect this.
With the driver model conversion we will not have any exported functions.
Move all exported functions to be together at the end of the file so that
we can deal with them in one #ifdef block.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:03 +0000 (11:35 -0600)]
dm: sata: dw_sata: Move exported functions to the end
With the driver model conversion we will not have any exported functions.
Move all exported functions to be together at the end of the file so that
we can deal with them in one #ifdef block.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:02 +0000 (11:35 -0600)]
dm: sata: dw_sata: Drop dwc_ahsata_rw_ncq_cmd()
This function is not called from anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:01 +0000 (11:35 -0600)]
dm: sata: dwc_ahsata: Make functions static
Some functions are not called from outside this file. Make these static
to make that obvious.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:35:00 +0000 (11:35 -0600)]
dm: core: Add a comment about the device_remove() flags
We should explain which flags are used for this function. Update the
comment to indicate this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:34:59 +0000 (11:34 -0600)]
dm: blk: Update return value in blk_create_devicef()
This returns 'ret' but the value is always zero. Update it to simply
return 0, for clarity.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 29 Jul 2017 17:34:58 +0000 (11:34 -0600)]
dm: usb: Adjust the 'usb' command to use blk_common_cmd()
Instead of having separate code in the 'usb' command, adjust it to use
the common function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>