Christian Brauner [Mon, 29 Aug 2022 12:38:40 +0000 (14:38 +0200)]
ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
[ Upstream commit
a26aa12384158116c0d80d50e0bdc7b3323551e2 ]
The xattr code in ntfs3 is currently a bit confused. For example, it
defines a POSIX ACL i_op->set_acl() method but instead of relying on the
generic POSIX ACL VFS helpers it defines its own set of xattr helpers
with the consequence that i_op->set_acl() is currently dead code.
Switch ntfs3 to rely on the VFS POSIX ACL xattr handlers. Also remove
i_op->{g,s}et_acl() methods from symlink inode operations. Symlinks
don't support xattrs.
This is a preliminary change for the following patches which move
handling idmapped mounts directly in posix_acl_xattr_set().
This survives POSIX ACL xfstests.
Fixes:
be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ondrej Mosnacek [Fri, 8 Jul 2022 09:34:51 +0000 (11:34 +0200)]
userfaultfd: open userfaultfds with O_RDONLY
[ Upstream commit
abec3d015fdfb7c63105c7e1c956188bf381aa55 ]
Since userfaultfd doesn't implement a write operation, it is more
appropriate to open it read-only.
When userfaultfds are opened read-write like it is now, and such fd is
passed from one process to another, SELinux will check both read and
write permissions for the target process, even though it can't actually
do any write operation on the fd later.
Inspired by the following bug report, which has hit the SELinux scenario
described above:
https://bugzilla.redhat.com/show_bug.cgi?id=1974559
Reported-by: Robert O'Callahan <roc@ocallahan.org>
Fixes:
86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mimi Zohar [Wed, 17 Aug 2022 21:18:42 +0000 (17:18 -0400)]
ima: fix blocking of security.ima xattrs of unsupported algorithms
[ Upstream commit
5926586f291b53cb8a0c9631fc19489be1186e2d ]
Limit validating the hash algorithm to just security.ima xattr, not
the security.evm xattr or any of the protected EVM security xattrs,
nor posix acls.
Fixes:
50f742dd9147 ("IMA: block writes of the security.ima xattr with unsupported algorithms")
Reported-by: Christian Brauner <brauner@kernel.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 20 Sep 2022 17:12:52 +0000 (19:12 +0200)]
selinux: use "grep -E" instead of "egrep"
commit
c969bb8dbaf2f3628927eae73e7c579a74cf1b6e upstream.
The latest version of grep claims that egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this by using "grep -E" instead.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[PM: tweak to remove vdso reference, cleanup subj line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Fri, 14 Oct 2022 23:50:20 +0000 (18:50 -0500)]
smb3: must initialize two ACL struct fields to zero
commit
f09bd695af3b8ab46fc24e5d6954a24104c38387 upstream.
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yunxiang Li [Wed, 21 Sep 2022 21:20:19 +0000 (17:20 -0400)]
drm/amd/display: Fix vblank refcount in vrr transition
commit
8799c0be89ebb99a16098bdf618f49f817bef76a upstream.
manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on
which causes drm_crtc_vblank_get in vrr_transition to fail, and later
when drm_crtc_vblank_put is called the refcount on vblank will be messed
up. Therefore move the call to after manage_dm_interrupts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Mon, 3 Oct 2022 11:15:41 +0000 (14:15 +0300)]
drm/i915: Fix watermark calculations for gen12+ CCS+CC modifier
commit
070a2855900de17b1e11a0dc35af9794e80f1a28 upstream.
Take the gen12+ CCS+CC modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
Cc: stable@vger.kernel.org
Fixes:
d1e2775e9b96 ("drm/i915/tgl: Add Clear Color support for TGL Render Decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-4-ville.syrjala@linux.intel.com
(cherry picked from commit
a627455bbe50a111475d7a42beb58fa64bd96c83)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Mon, 3 Oct 2022 11:15:40 +0000 (14:15 +0300)]
drm/i915: Fix watermark calculations for gen12+ MC CCS modifier
commit
484b2b9281000274ef7c5cb0a9ebc5da6f5c281c upstream.
Take the gen12+ MC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org
Fixes:
2dfbf9d2873a ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-3-ville.syrjala@linux.intel.com
(cherry picked from commit
91c9651425fe955b1387f3637607dda005f3f710)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Mon, 3 Oct 2022 11:15:39 +0000 (14:15 +0300)]
drm/i915: Fix watermark calculations for gen12+ RC CCS modifier
commit
c56453a00f19ccddee302f5f9fe96b80e0b47fd3 upstream.
Take the gen12+ RC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org
Fixes:
b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-2-ville.syrjala@linux.intel.com
(cherry picked from commit
a89a96a586114f67598c6391c75678b4dba5c2da)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jianglei Nie [Tue, 5 Jul 2022 13:25:46 +0000 (21:25 +0800)]
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
commit
540dfd188ea2940582841c1c220bd035a7db0e51 upstream.
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20220705132546.2247677-1-niejianglei2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Tue, 16 Aug 2022 18:04:36 +0000 (14:04 -0400)]
drm/nouveau/kms/nv140-: Disable interlacing
commit
8ba9249396bef37cb68be9e8dee7847f1737db9d upstream.
As it turns out: while Nvidia does actually have interlacing knobs on their
GPU still pretty much no current GPUs since Volta actually support it.
Trying interlacing on these GPUs will result in NVDisplay being quite
unhappy like so:
nouveau 0000:1f:00.0: disp: chid 0 stat
00004802 reason 4 [INVALID_ARG] mthd 2008 data
00000001 code
00080000
nouveau 0000:1f:00.0: disp: chid 0 stat
10005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code
00000001
So let's fix this by following the same behavior Nvidia's driver does and
disable interlacing entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816180436.156310-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 2 Sep 2022 14:37:15 +0000 (16:37 +0200)]
staging: greybus: audio_helper: remove unused and wrong debugfs usage
commit
d517cdeb904ddc0cbebcc959d43596426cac40b0 upstream.
In the greybus audio_helper code, the debugfs file for the dapm has the
potential to be removed and memory will be leaked. There is also the
very real potential for this code to remove ALL debugfs entries from the
system, and it seems like this is what will really happen if this code
ever runs. This all is very wrong as the greybus audio driver did not
create this debugfs file, the sound core did and controls the lifespan
of it.
So remove all of the debugfs logic from the audio_helper code as there's
no way it could be correct. If this really is needed, it can come back
with a fixup for the incorrect usage of the debugfs_lookup() call which
is what caused this to be noticed at all.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220902143715.320500-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Tue, 30 Aug 2022 23:15:49 +0000 (23:15 +0000)]
KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS
commit
eba9799b5a6efe2993cf92529608e4aa8163d73b upstream.
Deliberately truncate the exception error code when shoving it into the
VMCS (VM-Entry field for vmcs01 and vmcs02, VM-Exit field for vmcs12).
Intel CPUs are incapable of handling 32-bit error codes and will never
generate an error code with bits 31:16, but userspace can provide an
arbitrary error code via KVM_SET_VCPU_EVENTS. Failure to drop the bits
on exception injection results in failed VM-Entry, as VMX disallows
setting bits 31:16. Setting the bits on VM-Exit would at best confuse
L1, and at worse induce a nested VM-Entry failure, e.g. if L1 decided to
reinject the exception back into L2.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-3-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Tue, 30 Aug 2022 13:37:21 +0000 (15:37 +0200)]
KVM: nVMX: Don't propagate vmcs12's PERF_GLOBAL_CTRL settings to vmcs02
commit
def9d705c05eab3fdedeb10ad67907513b12038e upstream.
Don't propagate vmcs12's VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL to vmcs02.
KVM doesn't disallow L1 from using VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
even when KVM itself doesn't use the control, e.g. due to the various
CPU errata that where the MSR can be corrupted on VM-Exit.
Preserve KVM's (vmcs01) setting to hopefully avoid having to toggle the
bit in vmcs02 at a later point. E.g. if KVM is loading PERF_GLOBAL_CTRL
when running L1, then odds are good KVM will also load the MSR when
running L2.
Fixes:
8bf00a529967 ("KVM: VMX: add support for switching of PERF_GLOBAL_CTRL")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-18-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Tue, 30 Aug 2022 23:15:48 +0000 (23:15 +0000)]
KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
commit
d953540430c5af57f5de97ea9e36253908204027 upstream.
Drop pending exceptions and events queued for re-injection when leaving
nested guest mode, even if the "exit" is due to VM-Fail, SMI, or forced
by host userspace. Failure to purge events could result in an event
belonging to L2 being injected into L1.
This _should_ never happen for VM-Fail as all events should be blocked by
nested_run_pending, but it's possible if KVM, not the L1 hypervisor, is
the source of VM-Fail when running vmcs02.
SMI is a nop (barring unknown bugs) as recognition of SMI and thus entry
to SMM is blocked by pending exceptions and re-injected events.
Forced exit is definitely buggy, but has likely gone unnoticed because
userspace probably follows the forced exit with KVM_SET_VCPU_EVENTS (or
some other ioctl() that purges the queue).
Fixes:
4f350c6dbcb9 ("kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-2-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Luczaj [Sun, 21 Aug 2022 22:06:47 +0000 (00:06 +0200)]
KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
commit
6aa5c47c351b22c21205c87977c84809cd015fcf upstream.
The emulator checks the wrong variable while setting the CPU
interruptibility state, the target segment is embedded in the instruction
opcode, not the ModR/M register. Fix the condition.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Fixes:
a5457e7bcf9a ("KVM: emulate: POP SS triggers a MOV SS shadow too")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20220821215900.1419215-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Kuai [Tue, 13 Sep 2022 10:57:49 +0000 (18:57 +0800)]
blk-wbt: call rq_qos_add() after wb_normal is initialized
commit
8c5035dfbb9475b67c82b3fdb7351236525bf52b upstream.
Our test found a problem that wbt inflight counter is negative, which
will cause io hang(noted that this problem doesn't exist in mainline):
t1: device create t2: issue io
add_disk
blk_register_queue
wbt_enable_default
wbt_init
rq_qos_add
// wb_normal is still 0
/*
* in mainline, disk can't be opened before
* bdev_add(), however, in old kernels, disk
* can be opened before blk_register_queue().
*/
blkdev_issue_flush
// disk size is 0, however, it's not checked
submit_bio_wait
submit_bio
blk_mq_submit_bio
rq_qos_throttle
wbt_wait
bio_to_wbt_flags
rwb_enabled
// wb_normal is 0, inflight is not increased
wbt_queue_depth_changed(&rwb->rqos);
wbt_update_limits
// wb_normal is initialized
rq_qos_track
wbt_track
rq->wbt_flags |= bio_to_wbt_flags(rwb, bio);
// wb_normal is not 0，wbt_flags will be set
t3: io completion
blk_mq_free_request
rq_qos_done
wbt_done
wbt_is_tracked
// return true
__wbt_done
wbt_rqw_done
atomic_dec_return(&rqw->inflight);
// inflight is decreased
commit
8235b5c1e8c1 ("block: call bdev_add later in device_add_disk") can
avoid this problem, however it's better to fix this problem in wbt:
1) Lower kernel can't backport this patch due to lots of refactor.
2) Root cause is that wbt call rq_qos_add() before wb_normal is
initialized.
Fixes:
e34cbd307477 ("blk-wbt: add general throttling mechanism")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220913105749.3086243-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 18 Aug 2022 20:33:08 +0000 (22:33 +0200)]
media: cedrus: Fix endless loop in cedrus_h265_skip_bits()
commit
91db7a3fc7fe670cf1770a398a43bb4a1f776bf1 upstream.
The busy status bit may never de-assert if number of programmed skip
bits is incorrect, resulting in a kernel hang because the bit is polled
endlessly in the code. Fix it by adding timeout for the bit-polling.
This problem is reproducible by setting the data_bit_offset field of
the HEVC slice params to a wrong value by userspace.
Cc: stable@vger.kernel.org
Fixes:
7678c5462680 (media: cedrus: Fix decoding for some HEVC videos)
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 18 Aug 2022 20:33:07 +0000 (22:33 +0200)]
media: cedrus: Set the platform driver data earlier
commit
708938f8495147fe2e77a9a3e1015d8e6899323e upstream.
The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.
Cc: stable@vger.kernel.org
Fixes:
50e761516f2b (media: platform: Add Cedrus VPU decoder driver)
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Thu, 15 Sep 2022 17:00:24 +0000 (19:00 +0200)]
efi: libstub: drop pointless get_memory_map() call
commit
d80ca810f096ff66f451e7a3ed2f0cd9ef1ff519 upstream.
Currently, the non-x86 stub code calls get_memory_map() redundantly,
given that the data it returns is never used anywhere. So drop the call.
Cc: <stable@vger.kernel.org> # v4.14+
Fixes:
24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Mon, 26 Sep 2022 14:33:50 +0000 (09:33 -0500)]
thunderbolt: Explicitly enable lane adapter hotplug events at startup
commit
5d2569cb4a65c373896ec0217febdf88739ed295 upstream.
Software that has run before the USB4 CM in Linux runs may have disabled
hotplug events for a given lane adapter.
Other CMs such as that one distributed with Windows 11 will enable hotplug
events. Do the same thing in the Linux CM which fixes hotplug events on
"AMD Pink Sardine".
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 12 Oct 2022 10:40:58 +0000 (06:40 -0400)]
tracing: Fix reading strings from synthetic events
commit
0934ae9977c27133449b6dd8c6213970e7eece38 upstream.
The follow commands caused a crash:
# cd /sys/kernel/tracing
# echo 's:open char file[]' > dynamic_events
# echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger'
# echo 1 > events/synthetic/open/enable
BOOM!
The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.
Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).
Now the above can show:
packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr
in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp
packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr
Link: https://lkml.kernel.org/r/20221012104534.826549315@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes:
bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 12 Oct 2022 10:40:57 +0000 (06:40 -0400)]
tracing: Add "(fault)" name injection to kernel probes
commit
2e9906f84fc7c99388bb7123ade167250d50f1c0 upstream.
Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.
Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes:
bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 12 Oct 2022 10:40:56 +0000 (06:40 -0400)]
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
commit
f1d3cbfaafc10464550c6d3a125f4fc802bbaed5 upstream.
The functions:
fetch_store_strlen_user()
fetch_store_strlen()
fetch_store_string_user()
fetch_store_string()
are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.
Marked for stable as a fix for a crash in synthetic events requires it.
Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes:
bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Thu, 29 Sep 2022 13:50:29 +0000 (09:50 -0400)]
tracing: Add ioctl() to force ring buffer waiters to wake up
commit
01b2a52171735c6eea80ee2f355f32bea6c41418 upstream.
If a process is waiting on the ring buffer for data, there currently isn't
a clean way to force it to wake up. Add an ioctl call that will force any
tasks that are waiting on the trace_pipe_raw file to wake up.
Link: https://lkml.kernel.org/r/20220929095029.117f913f@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 28 Sep 2022 22:22:20 +0000 (18:22 -0400)]
tracing: Wake up waiters when tracing is disabled
commit
2b0fd9a59b7990c161fa1cb7b79edb22847c87c2 upstream.
When tracing is disabled, there's no reason that waiters should stay
waiting, wake them up, otherwise tasks get stuck when they should be
flushing the buffers.
Cc: stable@vger.kernel.org
Fixes:
e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 27 Sep 2022 23:15:27 +0000 (19:15 -0400)]
tracing: Wake up ring buffer waiters on closing of the file
commit
f3ddb74ad0790030c9592229fb14d8c451f4e9a8 upstream.
When the file that represents the ring buffer is closed, there may be
waiters waiting on more input from the ring buffer. Call
ring_buffer_wake_waiters() to wake up any waiters when the file is
closed.
Link: https://lkml.kernel.org/r/20220927231825.182416969@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Thu, 22 Sep 2022 14:56:22 +0000 (10:56 -0400)]
tracing: Disable interrupt or preemption before acquiring arch_spinlock_t
commit
c0a581d7126c0bbc96163276f585fd7b4e4d8d0e upstream.
It was found that some tracing functions in kernel/trace/trace.c acquire
an arch_spinlock_t with preemption and irqs enabled. An example is the
tracing_saved_cmdlines_size_read() function which intermittently causes
a "BUG: using smp_processor_id() in preemptible" warning when the LTP
read_all_proc test is run.
That can be problematic in case preemption happens after acquiring the
lock. Add the necessary preemption or interrupt disabling code in the
appropriate places before acquiring an arch_spinlock_t.
The convention here is to disable preemption for trace_cmdline_lock and
interupt for max_lock.
Link: https://lkml.kernel.org/r/20220922145622.1744826-1-longman@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org
Fixes:
a35873a0993b ("tracing: Add conditional snapshot")
Fixes:
939c7a4f04fc ("tracing: Introduce saved_cmdlines_size file")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Thu, 29 Sep 2022 14:49:09 +0000 (10:49 -0400)]
ring-buffer: Fix race between reset page and reading page
commit
a0fcaaed0c46cf9399d3a2d6e0c87ddb3df0e044 upstream.
The ring buffer is broken up into sub buffers (currently of page size).
Each sub buffer has a pointer to its "tail" (the last event written to the
sub buffer). When a new event is requested, the tail is locally
incremented to cover the size of the new event. This is done in a way that
there is no need for locking.
If the tail goes past the end of the sub buffer, the process of moving to
the next sub buffer takes place. After setting the current sub buffer to
the next one, the previous one that had the tail go passed the end of the
sub buffer needs to be reset back to the original tail location (before
the new event was requested) and the rest of the sub buffer needs to be
"padded".
The race happens when a reader takes control of the sub buffer. As readers
do a "swap" of sub buffers from the ring buffer to get exclusive access to
the sub buffer, it replaces the "head" sub buffer with an empty sub buffer
that goes back into the writable portion of the ring buffer. This swap can
happen as soon as the writer moves to the next sub buffer and before it
updates the last sub buffer with padding.
Because the sub buffer can be released to the reader while the writer is
still updating the padding, it is possible for the reader to see the event
that goes past the end of the sub buffer. This can cause obvious issues.
To fix this, add a few memory barriers so that the reader definitely sees
the updates to the sub buffer, and also waits until the writer has put
back the "tail" of the sub buffer back to the last event that was written
on it.
To be paranoid, it will only spin for 1 second, otherwise it will
warn and shutdown the ring buffer code. 1 second should be enough as
the writer does have preemption disabled. If the writer doesn't move
within 1 second (with preemption disabled) something is horribly
wrong. No interrupt should last 1 second!
Link: https://lore.kernel.org/all/20220830120854.7545-1-jiazi.li@transsion.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216369
Link: https://lkml.kernel.org/r/20220929104909.0650a36c@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes:
c7b0930857e22 ("ring-buffer: prevent adding write in discarded area")
Reported-by: Jiazi.Li <jiazi.li@transsion.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 28 Sep 2022 17:39:38 +0000 (13:39 -0400)]
ring-buffer: Add ring_buffer_wake_waiters()
commit
7e9fbbb1b776d8d7969551565bc246f74ec53b27 upstream.
On closing of a file that represents a ring buffer or flushing the file,
there may be waiters on the ring buffer that needs to be woken up and exit
the ring_buffer_wait() function.
Add ring_buffer_wake_waiters() to wake up the waiters on the ring buffer
and allow them to exit the wait loop.
Link: https://lkml.kernel.org/r/20220928133938.28dc2c27@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 27 Sep 2022 23:15:25 +0000 (19:15 -0400)]
ring-buffer: Check pending waiters when doing wake ups as well
commit
ec0bbc5ec5664dcee344f79373852117dc672c86 upstream.
The wake up waiters only checks the "wakeup_full" variable and not the
"full_waiters_pending". The full_waiters_pending is set when a waiter is
added to the wait queue. The wakeup_full is only set when an event is
triggered, and it clears the full_waiters_pending to avoid multiple calls
to irq_work_queue().
The irq_work callback really needs to check both wakeup_full as well as
full_waiters_pending such that this code can be used to wake up waiters
when a file is closed that represents the ring buffer and the waiters need
to be woken up.
Link: https://lkml.kernel.org/r/20220927231824.209460321@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 27 Sep 2022 23:15:24 +0000 (19:15 -0400)]
ring-buffer: Have the shortest_full queue be the shortest not longest
commit
3b19d614b61b93a131f463817e08219c9ce1fee3 upstream.
The logic to know when the shortest waiters on the ring buffer should be
woken up or not has uses a less than instead of a greater than compare,
which causes the shortest_full to actually be the longest.
Link: https://lkml.kernel.org/r/20220927231823.718039222@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 27 Sep 2022 18:43:17 +0000 (14:43 -0400)]
ring-buffer: Allow splice to read previous partially read pages
commit
fa8f4a89736b654125fb254b0db753ac68a5fced upstream.
If a page is partially read, and then the splice system call is run
against the ring buffer, it will always fail to read, no matter how much
is in the ring buffer. That's because the code path for a partial read of
the page does will fail if the "full" flag is set.
The splice system call wants full pages, so if the read of the ring buffer
is not yet full, it should return zero, and the splice will block. But if
a previous read was done, where the beginning has been consumed, it should
still be given to the splice caller if the rest of the page has been
written to.
This caused the splice command to never consume data in this scenario, and
let the ring buffer just fill up and lose events.
Link: https://lkml.kernel.org/r/20220927144317.46be6b80@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes:
8789a9e7df6bf ("ring-buffer: read page interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zheng Yejian [Mon, 26 Sep 2022 15:20:08 +0000 (15:20 +0000)]
ftrace: Properly unset FTRACE_HASH_FL_MOD
commit
0ce0638edf5ec83343302b884fa208179580700a upstream.
When executing following commands like what document said, but the log
"#### all functions enabled ####" was not shown as expect:
1. Set a 'mod' filter:
$ echo 'write*:mod:ext3' > /sys/kernel/tracing/set_ftrace_filter
2. Invert above filter:
$ echo '!write*:mod:ext3' >> /sys/kernel/tracing/set_ftrace_filter
3. Read the file:
$ cat /sys/kernel/tracing/set_ftrace_filter
By some debugging, I found that flag FTRACE_HASH_FL_MOD was not unset
after inversion like above step 2 and then result of ftrace_hash_empty()
is incorrect.
Link: https://lkml.kernel.org/r/20220926152008.2239274-1-zhengyejian1@huawei.com
Cc: <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
8c08f0d5c6fb ("ftrace: Have cached module filters be an active filter")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Mon, 8 Aug 2022 19:00:19 +0000 (15:00 -0400)]
livepatch: fix race between fork and KLP transition
commit
747f7a2901174c9afa805dddfb7b24db6f65e985 upstream.
The KLP transition code depends on the TIF_PATCH_PENDING and
the task->patch_state to stay in sync. On a normal (forward)
transition, TIF_PATCH_PENDING will be set on every task in
the system, while on a reverse transition (after a failed
forward one) first TIF_PATCH_PENDING will be cleared from
every task, followed by it being set on tasks that need to
be transitioned back to the original code.
However, the fork code copies over the TIF_PATCH_PENDING flag
from the parent to the child early on, in dup_task_struct and
setup_thread_stack. Much later, klp_copy_process will set
child->patch_state to match that of the parent.
However, the parent's patch_state may have been changed by KLP loading
or unloading since it was initially copied over into the child.
This results in the KLP code occasionally hitting this warning in
klp_complete_transition:
for_each_process_thread(g, task) {
WARN_ON_ONCE(test_tsk_thread_flag(task, TIF_PATCH_PENDING));
task->patch_state = KLP_UNDEFINED;
}
Set, or clear, the TIF_PATCH_PENDING flag in the child task
depending on whether or not it is needed at the time
klp_copy_process is called, at a point in copy_process where the
tasklist_lock is held exclusively, preventing races with the KLP
code.
The KLP code does have a few places where the state is changed
without the tasklist_lock held, but those should not cause
problems because klp_update_patch_state(current) cannot be
called while the current task is in the middle of fork,
klp_check_and_switch_task() which is called under the pi_lock,
which prevents rescheduling, and manipulation of the patch
state of idle tasks, which do not fork.
This should prevent this warning from triggering again in the
future, and close the race for both normal and reverse transitions.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Fixes:
d83a7cb375ee ("livepatch: change to a per-task consistency model")
Cc: stable@kernel.org
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220808150019.03d6a67b@imladris.surriel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 21 Sep 2022 06:40:40 +0000 (14:40 +0800)]
ext4: update 'state->fc_regions_size' after successful memory allocation
commit
27cd49780381c6ccbf248798e5e8fd076200ffba upstream.
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 21 Sep 2022 06:40:39 +0000 (14:40 +0800)]
ext4: fix potential memory leak in ext4_fc_record_regions()
commit
7069d105c1f15c442b68af43f7fde784f3126739 upstream.
As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 21 Sep 2022 06:40:38 +0000 (14:40 +0800)]
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
commit
9305721a309fa1bd7c194e0d4a2335bf3b29dca4 upstream.
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 14 Sep 2022 10:08:59 +0000 (18:08 +0800)]
ext4: fix miss release buffer head in ext4_fc_write_inode
commit
ccbf8eeb39f2ff00b54726a2b20b35d788c4ecb5 upstream.
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Sun, 11 Sep 2022 04:52:04 +0000 (12:52 +0800)]
ext4: fix dir corruption when ext4_dx_add_entry() fails
commit
7177dd009c7c04290891e9a534cd47d1b620bd04 upstream.
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220911045204.516460-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinke Han [Sat, 3 Sep 2022 01:24:29 +0000 (09:24 +0800)]
ext4: place buffer head allocation before handle start
commit
d1052d236eddf6aa851434db1897b942e8db9921 upstream.
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yi [Wed, 31 Aug 2022 07:46:29 +0000 (15:46 +0800)]
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate
commit
0b73284c564d3ae4feef4bc920292f004acf4980 upstream.
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit
88dbcbb3a484
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
comm fsstress: reading directory lblock 0
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
comm fsstress: reading directory lblock 0
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Wed, 24 Aug 2022 16:03:47 +0000 (18:03 +0200)]
ext4: don't increase iversion counter for ea_inodes
commit
50f094a5580e6297bf10a807d16f0ee23fa576cf upstream.
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 22 Aug 2022 11:48:32 +0000 (13:48 +0200)]
ext4: fix check for block being out of directory size
commit
61a1d87a324ad5e3ed27c6699dfc93218fcf3201 upstream.
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes:
65f8ea4cd57d ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lalith Rajendran [Thu, 18 Aug 2022 21:40:49 +0000 (21:40 +0000)]
ext4: make ext4_lazyinit_thread freezable
commit
3b575495ab8dbb4dbe85b4ac7f991693c3668ff5 upstream.
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Fri, 5 Aug 2022 12:39:47 +0000 (20:39 +0800)]
ext4: fix null-ptr-deref in ext4_write_info
commit
f9c1f248607d5546075d3f731e7607d5571f2b60 upstream.
I caught a null-ptr-deref bug as follows:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339
RIP: 0010:ext4_write_info+0x53/0x1b0
[...]
Call Trace:
dquot_writeback_dquots+0x341/0x9a0
ext4_sync_fs+0x19e/0x800
__sync_filesystem+0x83/0x100
sync_filesystem+0x89/0xf0
generic_shutdown_super+0x79/0x3e0
kill_block_super+0xa1/0x110
deactivate_locked_super+0xac/0x130
deactivate_super+0xb6/0xd0
cleanup_mnt+0x289/0x400
__cleanup_mnt+0x16/0x20
task_work_run+0x11c/0x1c0
exit_to_user_mode_prepare+0x203/0x210
syscall_exit_to_user_mode+0x5b/0x3a0
do_syscall_64+0x59/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
==================================================================
Above issue may happen as follows:
-------------------------------------
exit_to_user_mode_prepare
task_work_run
__cleanup_mnt
cleanup_mnt
deactivate_super
deactivate_locked_super
kill_block_super
generic_shutdown_super
shrink_dcache_for_umount
dentry = sb->s_root
sb->s_root = NULL <--- Here set NULL
sync_filesystem
__sync_filesystem
sb->s_op->sync_fs > ext4_sync_fs
dquot_writeback_dquots
sb->dq_op->write_info > ext4_write_info
ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2)
d_inode(sb->s_root)
s_root->d_inode <--- Null pointer dereference
To solve this problem, we use ext4_journal_start_sb directly
to avoid s_root being used.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220805123947.565152-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Wed, 27 Jul 2022 15:57:53 +0000 (17:57 +0200)]
ext4: avoid crash when inline data creation follows DIO write
commit
4bb26f2885ac6930984ee451b952c5a6042f2c0e upstream.
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:
ffffc90000ccf260 EFLAGS:
00010293
RAX:
ffffffff81e1abcd RBX:
0000008000000000 RCX:
ffff88810842a180
RDX:
0000000000000000 RSI:
0000008000000000 RDI:
0000000000000000
RBP:
ffffc90000ccf650 R08:
ffffffff81e17d58 R09:
ffffed10222c680b
R10:
dfffe910222c680c R11:
1ffff110222c680a R12:
ffff888111634128
R13:
ffffc90000ccf880 R14:
0000008410000000 R15:
0000000000000001
FS:
00007f72635d2640(0000) GS:
ffff88811b000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000565243379180 CR3:
000000010aa74000 CR4:
0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.
Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Sat, 17 Sep 2022 09:38:05 +0000 (17:38 +0800)]
jbd2: add miss release buffer head in fc_do_one_pass()
commit
dfff66f30f66b9524b661f311bbed8ff3d2ca49f upstream.
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220917093805.1782845-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 14 Sep 2022 10:08:12 +0000 (18:08 +0800)]
jbd2: fix potential use-after-free in jbd2_fc_wait_bufs
commit
243d1a5d505d0b0460c9af0ad56ed4a56ef0bebd upstream.
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 14 Sep 2022 10:08:11 +0000 (18:08 +0800)]
jbd2: fix potential buffer head reference count leak
commit
e0d5fc7a6d80ac2406c7dfc6bb625201d0250a8a upstream.
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Perepechko [Wed, 7 Sep 2022 16:59:59 +0000 (19:59 +0300)]
jbd2: wake up journal waiters in FIFO order, not LIFO
commit
34fc8768ec6089565d6d73bad26724083cecf7bd upstream.
LIFO wakeup order is unfair and sometimes leads to a journal
user not being able to get a journal handle for hundreds of
transactions in a row.
FIFO wakeup can make things more fair.
Cc: stable@kernel.org
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220907165959.1137482-1-alexey.lyashkov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Fri, 30 Sep 2022 05:57:43 +0000 (22:57 -0700)]
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
commit
607e57c6c62c00965ae276902c166834ce73014a upstream.
Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes:
f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Tue, 14 Sep 2021 19:49:03 +0000 (12:49 -0700)]
hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
commit
f02003c860d921171be4a27e2893766eb3bc6871 upstream.
Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.
In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=
a25e0b5e6ac8a77a71c229e0a7b744603365b0e9
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: llvm@lists.linux.dev
Fixes:
dcb7c0b9461c ("hardening: Clarify Kconfig text for auto-var-init")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210914102837.6172-1-will@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 14 Sep 2022 11:51:51 +0000 (19:51 +0800)]
f2fs: fix to do sanity check on summary info
commit
c6ad7fd16657ebd34a87a97d9588195aae87597d upstream.
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr
ffff8881464dcd80 by task mount/1013
CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x5e
print_report.cold+0xf3/0x68d
kasan_report+0xa8/0x130
recover_data+0x63ae/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.
- recover_data
- do_recover_data
- check_index_in_prev_nodes
- f2fs_data_blkaddr
This patch adds sanity check on summary info in recovery and GC flow
in where the flows rely on them.
After patch:
[ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Tue, 13 Sep 2022 02:08:41 +0000 (10:08 +0800)]
f2fs: fix to do sanity check on destination blkaddr during recovery
commit
0ef4ca04a3f9223ff8bc440041c524b2123e09a3 upstream.
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
loop5: detected capacity change from 0 to 131072
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): Bitmap was wrongly set, blk:5634
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198
RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs]
Call Trace:
<TASK>
f2fs_do_replace_block+0xa98/0x1890 [f2fs]
f2fs_replace_block+0xeb/0x180 [f2fs]
recover_data+0x1a69/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Tue, 23 Aug 2022 17:18:42 +0000 (10:18 -0700)]
f2fs: increase the limit for reserve_root
commit
da35fe96d12d15779f3cb74929b7ed03941cf983 upstream.
This patch increases the threshold that limits the reserved root space from 0.2%
to 12.5% by using simple shift operation.
Typically Android sets 128MB, but if the storage capacity is 32GB, 0.2% which is
around 64MB becomes too small. Let's relax it.
Cc: stable@vger.kernel.org
Reported-by: Aran Dalton <arda@allwinnertech.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 19 Aug 2022 22:52:02 +0000 (15:52 -0700)]
f2fs: flush pending checkpoints when freezing super
commit
c7b58576370147833999fd4cc874d0f918bdf9ca upstream.
This avoids -EINVAL when trying to freeze f2fs.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 19 Aug 2022 05:40:09 +0000 (22:40 -0700)]
f2fs: complete checkpoints during remount
commit
4f99484d27961cb194cebcd917176fa038a5025f upstream.
Otherwise, pending checkpoints can contribute a race condition to give a
quota warning.
- Thread - checkpoint thread
add checkpoints to the list
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Or,
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
create a ckpt thread
f2fs_enable_checkpoint() adds checkpoints
wait for f2fs_sync_fs()
trigger another pending checkpoint
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Tue, 20 Sep 2022 13:43:51 +0000 (22:43 +0900)]
btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
commit
cbddcc4fa3443fe8cfb2ff8e210deb1f6a0eea38 upstream.
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit
bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit
55c69072d6bd5be1 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes:
bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 23 Aug 2022 11:45:42 +0000 (12:45 +0100)]
btrfs: fix race between quota enable and quota rescan ioctl
commit
331cd9461412e103d07595a10289de90004ac890 upstream.
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Thu, 25 Aug 2022 10:06:57 +0000 (12:06 +0200)]
fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE
commit
cbfecb927f429a6fa613d74b998496bd71e4438a upstream.
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mickaël Salaün [Thu, 29 Sep 2022 10:04:47 +0000 (12:04 +0200)]
ksmbd: Fix user namespace mapping
commit
7c88c1e0ab1704bacb751341ee6431c3be34b834 upstream.
A kernel daemon should not rely on the current thread, which is unknown
and might be malicious. Before this security fix,
ksmbd_override_fsids() didn't correctly override FS UID/GID which means
that arbitrary user space threads could trick the kernel to impersonate
arbitrary users or groups for file system access checks, leading to
file system access bypass.
This was found while investigating truncate support for Landlock:
https://lore.kernel.org/r/CAKYAXd8fpMJ7guizOjHgxEyyjoUwPsx3jLOPZP=wPYcbhkVXqA@mail.gmail.com
Fixes:
e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Steve French <smfrench@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220929100447.108468-1-mic@digikod.net
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Xiaoxu [Mon, 26 Sep 2022 03:36:30 +0000 (11:36 +0800)]
ksmbd: Fix wrong return value and message length check in smb2_ioctl()
commit
b1763d265af62800ec96eeb79803c4c537dcef3a upstream.
Commit
c7803b05f74b ("smb3: fix ksmbd bigendian bug in oplock
break, and move its struct to smbfs_common") use the defination
of 'struct validate_negotiate_info_req' in smbfs_common, the
array length of 'Dialects' changed from 1 to 4, but the protocol
does not require the client to send all 4. This lead the request
which satisfied with protocol and server to fail.
So just ensure the request payload has the 'DialectCount' in
smb2_ioctl(), then fsctl_validate_negotiate_info() will use it
to validate the payload length and each dialect.
Also when the {in, out}_buf_len is less than the required, should
goto out to initialize the status in the response header.
Fixes:
f7db8fd03a4b ("ksmbd: add validation in smb2_ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Thu, 22 Sep 2022 14:35:43 +0000 (23:35 +0900)]
ksmbd: fix endless loop when encryption for response fails
commit
360c8ee6fefdb496fffd2c18bb9a96a376a1a804 upstream.
If ->encrypt_resp return error, goto statement cause endless loop.
It send an error response immediately after removing it.
Fixes:
0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hyunwoo Kim [Sun, 25 Sep 2022 13:32:43 +0000 (06:32 -0700)]
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
commit
5610bcfe8693c02e2e4c8b31427f1bdbdecc839c upstream.
A race condition may occur if the user physically removes the
USB device while calling open() for this device node.
This is a race condition between the ufx_ops_open() function and
the ufx_usb_disconnect() function, which may eventually result in UAF.
So, add a mutex to the ufx_ops_open() and ufx_usb_disconnect() functions
to avoid race contidion of krefs.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Schulz [Fri, 30 Sep 2022 13:20:32 +0000 (15:20 +0200)]
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
commit
4635c0e2a7f7f3568cbfccae70121f9835efa62c upstream.
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's re-implement the pinmux_ops.gpio_set_direction callback so that
the gpio subsystem can request from the pinctrl driver to put the pin in
its GPIO function.
Fixes:
9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Schulz [Fri, 30 Sep 2022 13:20:33 +0000 (15:20 +0200)]
gpio: rockchip: request GPIO mux to pinctrl when setting direction
commit
8ea8af6c8469156ac2042d83d73f6b74eb4b4b45 upstream.
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.
Fixes:
9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Fixes:
936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saurav Kashyap [Mon, 19 Sep 2022 13:44:34 +0000 (06:44 -0700)]
scsi: qedf: Populate sysfs attributes for vport
commit
592642e6b11e620e4b43189f8072752429fc8dc3 upstream.
Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.
Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 16 Sep 2022 12:29:08 +0000 (13:29 +0100)]
slimbus: qcom-ngd: cleanup in probe error path
commit
16f14551d0df9e7cd283545d7d748829594d912f upstream.
Add proper error path in probe() to cleanup resources previously
acquired/allocated to fix warnings visible during probe deferral:
notifier callback qcom_slim_ngd_ssr_notify already registered
WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90
Modules linked in:
CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-
20220830 #380
Call trace:
notifier_chain_register+0x5c/0x90
srcu_notifier_chain_register+0x44/0x90
qcom_register_ssr_notifier+0x38/0x4c
qcom_slim_ngd_ctrl_probe+0xd8/0x400
platform_probe+0x6c/0xe0
really_probe+0xbc/0x2d4
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x12c
__device_attach_driver+0xb8/0x120
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x88/0xc0
process_one_work+0x1d4/0x320
worker_thread+0x2cc/0x44c
kthread+0x110/0x114
ret_from_fork+0x10/0x20
Fixes:
e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 16 Sep 2022 12:29:07 +0000 (13:29 +0100)]
slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure
commit
5038d21dde818fe74ba1fcb6f2cee35b8c2ebbf2 upstream.
Use correct error code, instead of previous 'ret' value, when printing
error from pdr_add_lookup() failure.
Fixes:
e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Sat, 27 Aug 2022 13:44:54 +0000 (15:44 +0200)]
powerpc/boot: Explicitly disable usage of SPE instructions
commit
110a58b9f91c66f743c01a2c217243d94c899c23 upstream.
uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827134454.17365-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Rui [Sat, 24 Sep 2022 05:47:36 +0000 (13:47 +0800)]
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
commit
4c081324df5608b73428662ca54d5221ea03a6bd upstream.
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR dram_domain_energy_unit quirk.
Fixes:
2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 1 Sep 2022 19:10:24 +0000 (15:10 -0400)]
NFSD: Protect against send buffer overflow in NFSv3 READ
commit
fa6be9cc6e80ec79892ddf08a8c10cabab9baf38 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 1 Sep 2022 19:10:18 +0000 (15:10 -0400)]
NFSD: Protect against send buffer overflow in NFSv2 READ
commit
401bc1f90874280a80b93f23be33a0e7e2d1f912 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 1 Sep 2022 19:10:12 +0000 (15:10 -0400)]
NFSD: Protect against send buffer overflow in NFSv3 READDIR
commit
640f87c190e0d1b2a0fcb2ecf6d2cd53b1c41991 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.
Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Tue, 20 Sep 2022 23:35:37 +0000 (00:35 +0100)]
serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices
commit
00b7a4d4ee42be1c515e56cb1e8ba0f25e271d8e upstream.
Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.
Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.
Fixes:
366f6c955d4d ("serial: 8250: Add proper clock handling for OxSemi PCIe devices")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Tue, 20 Sep 2022 23:35:32 +0000 (00:35 +0100)]
serial: 8250: Let drivers request full 16550A feature probing
commit
9906890c89e4dbd900ed87ad3040080339a7f411 upstream.
A SERIAL_8250_16550A_VARIANTS configuration option has been recently
defined that lets one request the 8250 driver not to probe for 16550A
device features so as to reduce the driver's device startup time in
virtual machines.
Some actual hardware devices require these features to have been fully
determined however for their driver to work correctly, so define a flag
to let drivers request full 16550A feature probing on a device-by-device
basis if required regardless of the SERIAL_8250_16550A_VARIANTS option
setting chosen.
Fixes:
dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209202357520.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Wed, 21 Sep 2022 19:49:16 +0000 (20:49 +0100)]
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
commit
0e32818397426a688f598f35d3bc762eca6d7592 upstream.
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes:
58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 2 Oct 2022 22:20:06 +0000 (18:20 -0400)]
xen/gntdev: Accommodate VMA splitting
commit
5c13a4a0291b30191eff9ead8d010e1ca43a4d0c upstream.
Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:
* User process sets up a gntdev mapping composed of two grant mappings
(i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.
In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:
BUG: Bad page map in process doublemap.test pte:... pmd:...
page:
0000000057c97bff refcount:1 mapcount:-1 \
mapping:
0000000000000000 index:0x0 pfn:...
...
page dumped because: bad pte
...
file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0
...
Call Trace:
<TASK>
dump_stack_lvl+0x46/0x5e
print_bad_pte.cold+0x66/0xb6
unmap_page_range+0x7e5/0xdc0
unmap_vmas+0x78/0xf0
unmap_region+0xa8/0x110
__do_munmap+0x1ea/0x4e0
__vm_munmap+0x75/0x120
__x64_sys_munmap+0x28/0x40
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
...
For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.
Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.
Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:
mmap
gntdev_mmap
mmap (repeat mmap with MAP_FIXED over the same address range)
gntdev_invalidate
unmap_grant_pages (sets 'being_removed' entries to true)
gnttab_unmap_refs_async
unmap_single_vma
gntdev_mmap (maps the shared pages again)
munmap
gntdev_invalidate
unmap_grant_pages
(no-op because 'being_removed' entries are true)
unmap_single_vma (For PV domains, Xen reports that a granted page
is being unmapped and triggers a general protection fault in the
affected domain, if Xen was built with CONFIG_DEBUG)
The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping.
Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes:
ab31523c2fca ("xen/gntdev: allow usermode to map granted pages")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-3-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 2 Oct 2022 22:20:05 +0000 (18:20 -0400)]
xen/gntdev: Prevent leaking grants
commit
0991028cd49567d7016d1b224fe0117c35059f86 upstream.
Prior to this commit, if a grant mapping operation failed partially,
some of the entries in the map_ops array would be invalid, whereas all
of the entries in the kmap_ops array would be valid. This in turn would
cause the following logic in gntdev_map_grant_pages to become invalid:
for (i = 0; i < map->count; i++) {
if (map->map_ops[i].status == GNTST_okay) {
map->unmap_ops[i].handle = map->map_ops[i].handle;
if (!use_ptemod)
alloced++;
}
if (use_ptemod) {
if (map->kmap_ops[i].status == GNTST_okay) {
if (map->map_ops[i].status == GNTST_okay)
alloced++;
map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
}
}
}
...
atomic_add(alloced, &map->live_grants);
Assume that use_ptemod is true (i.e., the domain mapping the granted
pages is a paravirtualized domain). In the code excerpt above, note that
the "alloced" variable is only incremented when both kmap_ops[i].status
and map_ops[i].status are set to GNTST_okay (i.e., both mapping
operations are successful). However, as also noted above, there are
cases where a grant mapping operation fails partially, breaking the
assumption of the code excerpt above.
The aforementioned causes map->live_grants to be incorrectly set. In
some cases, all of the map_ops mappings fail, but all of the kmap_ops
mappings succeed, meaning that live_grants may remain zero. This in turn
makes it impossible to unmap the successfully grant-mapped pages pointed
to by kmap_ops, because unmap_grant_pages has the following snippet of
code at its beginning:
if (atomic_read(&map->live_grants) == 0)
return; /* Nothing to do */
In other cases where only some of the map_ops mappings fail but all
kmap_ops mappings succeed, live_grants is made positive, but when the
user requests unmapping the grant-mapped pages, __unmap_grant_pages_done
will then make map->live_grants negative, because the latter function
does not check if all of the pages that were requested to be unmapped
were actually unmapped, and the same function unconditionally subtracts
"data->count" (i.e., a value that can be greater than map->live_grants)
from map->live_grants. The side effects of a negative live_grants value
have not been studied.
The net effect of all of this is that grant references are leaked in one
of the above conditions. In Qubes OS v4.1 (which uses Xen's grant
mechanism extensively for X11 GUI isolation), this issue manifests
itself with warning messages like the following to be printed out by the
Linux kernel in the VM that had granted pages (that contain X11 GUI
window data) to dom0: "g.e. 0x1234 still pending", especially after the
user rapidly resizes GUI VM windows (causing some grant-mapping
operations to partially or completely fail, due to the fact that the VM
unshares some of the pages as part of the window resizing, making the
pages impossible to grant-map from dom0).
The fix for this issue involves counting all successful map_ops and
kmap_ops mappings separately, and then adding the sum to live_grants.
During unmapping, only the number of successfully unmapped grants is
subtracted from live_grants. The code is also modified to check for
negative live_grants values after the subtraction and warn the user.
Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes:
dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Acked-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-2-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Llamas [Fri, 30 Sep 2022 00:38:43 +0000 (00:38 +0000)]
mm/mmap: undo ->mmap() when arch_validate_flags() fails
commit
deb0f6562884b5b4beb883d73e66a7d3a1b96d99 upstream.
Commit
c462ac288f2c ("mm: Introduce arch_validate_flags()") added a late
check in mmap_region() to let architectures validate vm_flags. The check
needs to happen after calling ->mmap() as the flags can potentially be
modified during this callback.
If arch_validate_flags() check fails we unmap and free the vma. However,
the error path fails to undo the ->mmap() call that previously succeeded
and depending on the specific ->mmap() implementation this translates to
reference increments, memory allocations and other operations what will
not be cleaned up.
There are several places (mainly device drivers) where this is an issue.
However, one specific example is bpf_map_mmap() which keeps count of the
mappings in map->writecnt. The count is incremented on ->mmap() and then
decremented on vm_ops->close(). When arch_validate_flags() fails this
count is off since bpf_map_mmap_close() is never called.
One can reproduce this issue in arm64 devices with MTE support. Here the
vm_flags are checked to only allow VM_MTE if VM_MTE_ALLOWED has been set
previously. From userspace then is enough to pass the PROT_MTE flag to
mmap() syscall to trigger the arch_validate_flags() failure.
The following program reproduces this issue:
#include <stdio.h>
#include <unistd.h>
#include <linux/unistd.h>
#include <linux/bpf.h>
#include <sys/mman.h>
int main(void)
{
union bpf_attr attr = {
.map_type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(long long),
.max_entries = 256,
.map_flags = BPF_F_MMAPABLE,
};
int fd;
fd = syscall(__NR_bpf, BPF_MAP_CREATE, &attr, sizeof(attr));
mmap(NULL, 4096, PROT_WRITE | PROT_MTE, MAP_SHARED, fd, 0);
return 0;
}
By manually adding some log statements to the vm_ops callbacks we can
confirm that when passing PROT_MTE to mmap() the map->writecnt is off upon
->release():
With PROT_MTE flag:
root@debian:~# ./bpf-test
[ 111.263874] bpf_map_write_active_inc: map=9 writecnt=1
[ 111.288763] bpf_map_release: map=9 writecnt=1
Without PROT_MTE flag:
root@debian:~# ./bpf-test
[ 157.816912] bpf_map_write_active_inc: map=10 writecnt=1
[ 157.830442] bpf_map_write_active_dec: map=10 writecnt=0
[ 157.832396] bpf_map_release: map=10 writecnt=0
This patch fixes the above issue by calling vm_ops->close() when the
arch_validate_flags() check fails, after this we can proceed to unmap and
free the vma on the error path.
Link: https://lkml.kernel.org/r/20220930003844.1210987-1-cmllamas@google.com
Fixes:
c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baolin Wang [Thu, 18 Aug 2022 07:37:43 +0000 (15:37 +0800)]
mm/damon: validate if the pmd entry is present before accessing
commit
c8b9aff419303e4d4219b5ff64b1c7e062dee48e upstream.
pmd_huge() is used to validate if the pmd entry is mapped by a huge page,
also including the case of non-present (migration or hwpoisoned) pmd entry
on arm64 or x86 architectures. This means that pmd_pfn() can not get the
correct pfn number for a non-present pmd entry, which will cause
damon_get_page() to get an incorrect page struct (also may be NULL by
pfn_to_online_page()), making the access statistics incorrect.
This means that the DAMON may make incorrect decision according to the
incorrect statistics, for example, DAMON may can not reclaim cold page
in time due to this cold page was regarded as accessed mistakenly if
DAMOS_PAGEOUT operation is specified.
Moreover it does not make sense that we still waste time to get the page
of the non-present entry. Just treat it as not-accessed and skip it,
which maintains consistency with non-present pte level entries.
So add pmd entry present validation to fix the above issues.
Link: https://lkml.kernel.org/r/58b1d1f5fbda7db49ca886d9ef6783e3dcbbbc98.1660805030.git.baolin.wang@linux.alibaba.com
Fixes:
3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Morse [Fri, 30 Sep 2022 13:19:59 +0000 (14:19 +0100)]
arm64: errata: Add Cortex-A55 to the repeat tlbi list
commit
171df58028bf4649460fb146a56a58dcb0c8f75a upstream.
Cortex-A55 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930131959.3082594-1-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 8 Sep 2022 09:51:04 +0000 (11:51 +0200)]
drm/udl: Restore display mode on resume
commit
6d6e732835db92e66c28dbcf258a7e3d3c71420d upstream.
Restore the display mode whne resuming from suspend. Currently, the
display remains dark.
On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.
The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.
Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus. We should drop the
whole check and always apply the mode change in this function.
[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
suggestion ]
Fixes:
997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions")
Cc: <stable@vger.kernel.org>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 30 Jun 2022 20:07:22 +0000 (23:07 +0300)]
drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()
commit
4656b3a26a9e9fe5f04bfd2ab55b066266ba7f4d upstream.
Make virtio_gpu_plane_cleanup_fb() to clean the state which DRM core
wants to clean up and not the current plane's state. Normally the older
atomic state is cleaned up, but the newer state could also be cleaned up
in case of aborted commits.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-6-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 30 Jun 2022 20:07:20 +0000 (23:07 +0300)]
drm/virtio: Unlock reservations on virtio_gpu_object_shmem_init() error
commit
fdf0ff4d12cbcd76b53f27c96ce51ddca400884a upstream.
Unlock reservations in the error code path of virtio_gpu_object_create()
to silence debug warning splat produced by ww_mutex_destroy(&obj->lock)
when GEM is released with the held lock.
Cc: stable@vger.kernel.org
Fixes:
30172efbfb84 ("drm/virtio: blob prep: refactor getting pages and attaching backing")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-4-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 30 Jun 2022 20:07:19 +0000 (23:07 +0300)]
drm/virtio: Check whether transferred 2D BO is shmem
commit
e473216b42aa1fd9fc6b94b608b42c210c655908 upstream.
Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO.
Cc: stable@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-3-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dario Binacchi [Wed, 21 Sep 2022 17:05:56 +0000 (19:05 +0200)]
dmaengine: mxs: use platform_driver_register
commit
26696d4657167112a1079f86cba1739765c1360e upstream.
Driver registration fails on SOC imx8mn as its supplier, the clock
control module, is probed later than subsys initcall level. This driver
uses platform_driver_probe which is not compatible with deferred probing
and won't be probed again later if probe function fails due to clock not
being available at that time.
This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when the clock control module will be available.
The __init annotation has been dropped because it is not compatible with
deferred probing. The code is not executed once and its memory cannot be
freed.
Fixes:
a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Hamza Mahfooz [Wed, 5 Oct 2022 15:30:38 +0000 (11:30 -0400)]
Revert "drm/amdgpu: use dirty framebuffer helper"
commit
17d819e2828cacca2e4c909044eb9798ed379cd2 upstream.
This reverts commit
66f99628eb24409cb8feb5061f78283c8b65f820.
Unfortunately, that commit causes performance regressions on non-PSR
setups. So, just revert it until FB_DAMAGE_CLIPS support can be added.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554
Fixes:
66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Fixes:
abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rishabh Bhatnagar [Tue, 20 Sep 2022 19:19:32 +0000 (19:19 +0000)]
nvme-pci: set min_align_mask before calculating max_hw_sectors
commit
61ce339f19fabbc3e51237148a7ef6f2270e44fa upstream.
If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device. Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Thu, 29 Sep 2022 07:36:47 +0000 (10:36 +0300)]
nvme-multipath: fix possible hang in live ns resize with ANA access
commit
72e3b8883a36e80ebfa41015c7b6926ce31ace05 upstream.
When we revalidate paths as part of ns size change (as of commit
e7d65803e2bb), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes:
e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gaosheng Cui [Fri, 16 Sep 2022 12:04:02 +0000 (13:04 +0100)]
nvmem: core: Fix memleak in nvmem_register()
commit
bd1244561fa2a4531ded40dbf09c9599084f8b29 upstream.
dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases.
Fixes:
de0534df9347 ("nvmem: core: fix error handling while validating keepout regions")
Cc: stable@vger.kernel.org
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 12 Jul 2022 07:52:55 +0000 (15:52 +0800)]
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
commit
16c546e148fa6d14a019431436a6f7b4087dbccd upstream.
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.099465] Stack :
9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127]
9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774]
90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412]
0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056]
0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711]
ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364]
900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012]
0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641]
9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260]
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<
90000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<
9000000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<
900000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<
9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<
9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<
90000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<
90000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<
90000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<
90000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<
9000000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<
9000000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace
8b484262b4b8c24c ]---
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fangrui Song [Sun, 18 Sep 2022 09:29:34 +0000 (02:29 -0700)]
riscv: Pass -mno-relax only on lld < 15.0.0
commit
3cebf80e9a0d3adcb174053be32c88a640b3344b upstream.
lld since llvm:
6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation. -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:
ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax
but the .o is already compiled with -mno-relax
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20220710071117.446112-1-maskray@google.com/
Link: https://lore.kernel.org/r/20220918092933.19943-1-palmer@rivosinc.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenting Zhang [Fri, 8 Jul 2022 20:38:22 +0000 (16:38 -0400)]
riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb
commit
10f6913c548b32ecb73801a16b120e761c6957ea upstream.
When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by
CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be
used regardless of the result of device tree scanning.
This especially fixes the case where a device tree without the
chosen node is supplied to the kernel. In such cases,
early_init_dt_scan would return true. But inside
early_init_dt_scan_chosen, the cmdline won't be updated as there
is no chosen node in the device tree. As a result, CONFIG_CMDLINE
is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE
is enabled. This commit allows properly update boot_command_line
in this situation.
Fixes:
8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed")
Signed-off-by: Wenting Zhang <zephray@outlook.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Bresticker [Thu, 15 Sep 2022 19:37:01 +0000 (15:37 -0400)]
riscv: Make VM_WRITE imply VM_READ
commit
7ab72c597356be1e7f0f3d856e54ce78527f43c8 upstream.
RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.
Fixes:
2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Bresticker [Thu, 15 Sep 2022 19:37:02 +0000 (15:37 -0400)]
riscv: Allow PROT_WRITE-only mmap()
commit
9e2e6042a7ec6504fe8e366717afa2f40cf16488 upstream.
Commit
2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.
Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.
Fixes:
2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Fri, 14 Oct 2022 08:13:55 +0000 (10:13 +0200)]
parisc: fbdev/stifb: Align graphics memory size to 4MB
commit
aca7c13d3bee81a968337a5515411409ae9d095d upstream.
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Thu, 22 Sep 2022 21:56:06 +0000 (22:56 +0100)]
RISC-V: Make port I/O string accessors actually work
commit
9cc205e3c17d5716da7ebb7fa0c985555e95d009 upstream.
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
causing a memory access fault:
Unable to handle kernel access to user memory without uaccess routines at virtual address
0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc :
ffffffff80542c3e ra :
ffffffff80542a8c sp :
ffffffd88899fc60
gp :
ffffffff80fa2700 tp :
ffffffd882b1e900 t0 :
ffffffd883d0b000
t1 :
ffffffffff000002 t2 :
4646393043330a38 s0 :
ffffffd88899fcf0
s1 :
0000000000001000 a0 :
0000000000000010 a1 :
0000000000000000
a2 :
ffffffd883d0a010 a3 :
0000000000000023 a4 :
00000000ffff8fbb
a5 :
ffffffd883d0a001 a6 :
0000000100000000 a7 :
ffffffc800000000
s2 :
ffffffffff000002 s3 :
ffffffff80d28880 s4 :
ffffffff80fa1f50
s5 :
0000000000001008 s6 :
0000000000000008 s7 :
ffffffd883d0a000
s8 :
0004000000000000 s9 :
ffffffff80dc1d80 s10:
ffffffd8807e4000
s11:
0000000000000000 t3 :
00000000000000ff t4 :
393044410a303930
t5 :
0000000000001000 t6 :
0000000000040000
status:
0000000200000120 badaddr:
0000000000001008 cause:
000000000000000f
[<
ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<
ffffffff8053bbc0>] parport_write+0x46/0xf8
[<
ffffffff8050530e>] lp_write+0x158/0x2d2
[<
ffffffff80185716>] vfs_write+0x8e/0x2c2
[<
ffffffff80185a74>] ksys_write+0x52/0xc2
[<
ffffffff80185af2>] sys_write+0xe/0x16
[<
ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace
0000000000000000 ]---
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes:
fab957c11efe2 ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conor Dooley [Fri, 15 Jul 2022 17:51:56 +0000 (18:51 +0100)]
riscv: topology: fix default topology reporting
commit
fbd92809997a391f28075f1c8b5ee314c225557c upstream.
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
Core L#0
L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
Fixes:
03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log