staging: comedi: ni_stc.h: remove unused GPCT register bit defines

The bit defines in this header for the GPCT registers are not used. The ones
in ni_tio_internal.h are used instead. Remove them from this header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_*_Save_Registers

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Joint_Status_2_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up DIO_Serial_Input_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Joint_Status_1_Register

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_*_Save_Registers

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up G_Save_Register

Rename the CamelCase and define the G0 and G1 registers to add clarity
to the mio_regmap tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up G_HW_Save_Register

Rename the CamelCase and define the G0 and G1 registers to add clarity
to the mio_regmap tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up DIO_Parallel_Input_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Status_2_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Status_2_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up G_Status_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Status_1_Register and bits

Rename the CamelCase. Use the BIT() marco to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Status_1_Register and bits

Rename the CamelCase. Use the BIT() marco to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Mode_3_Register and bits

Rename the CamelCase. Use the BIT() marco to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Output_Control_Register and bits

Rename the CamelCase. Convert the inline helper function into a macro and
use the BIT() marco to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Write_Strobe_*_Register

The Write_Strobe_*_Register defines are noy used. Instead the more
descriptive Configuration_Memory_Clear, ADC_FIFO_Clear and DAC_FIFO_Clear
defines are used. Remove the unused defines and rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up RTSI_Board_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up RTSI_Trig_[AB]_Output_Register and bits

Rename the CamelCase. Convert the inline helper functions to macros and use
the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Personal_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Personal_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Tidy up ni_ai_reset() by using a local var to set the common bits and
programming the register in the common code path.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Second_IRQ_B_Enable_Register and bits

Rename the CamelCase. The bit defines are identical to NISTC_INTB_ENA_REG.
Reuse them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Interrupt_B_Enable_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Second_IRQ_A_Enable_Register and bits

Rename the CamelCase. The bit defines are identical to NISTC_INTA_ENA_REG.
Reuse them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Interrupt_A_Enable_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Joint_Reset_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Mode_3_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up G_Autoincrement_Register

Rename the CamelCase and define the G0 and G1 registers to add clarity
to the mio_regmap tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Trigger_Select_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Tidy up the ni_ao_cmd() by using a local var to mask/set the bits then
programming the register in the common code path.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Start_Select_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_DIV_Load_A_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Trigger_Select_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Tidy up ni_ai_cmd() by using a local var to set the common bits and
programming the register in the common code path.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_START_STOP_Select_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Analog_Trigger_Etc_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Output_Control_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Tidy up the programming of this register un ni_ai_reset() by using a
local variable to set the common bits then writing the register in the
common code path.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Interrupt_Control_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up RTSI_Trig_Direction_Register and bits

Rename the CamelCase and convert the enum and inline function into defines.
Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: remove unreachable code in RTSI_Output_Bit()

All the callers of this function check the 'channel' number with
num_configurable_rtsi_channels(). This check can never occure.
Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up IO_Bidirection_Pin_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use 'reg' in ni_set_bitfield()

Use the passed 'reg' parameter to write to the STC registers instead
of duplicating the case symbol.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Clock_and_FOUT_Register and bits

Rename the CamelCase and convert the enum and inline function into defines.
Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_*_Load_[AB]_Register

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Mode_2_Register and bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Mode_1_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up G_{Mode,Load,Input}*_Register

Rename the CamelCase and define he G0 and G1 registers to add clarity
to the mio_regmap tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_*_Load_[AB]_Registers

Rename the CamelCase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Mode_2_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Mode_1_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up DIO_Control_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up DIO_Output_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Command_1_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Command_1_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up G_Command_Register

Rename the CamelCase and define the G0 and G1 registers to add clarity
to the mio_regmap tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AO_Command_2_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up AI_Command_2_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Interrupt_B_Ack_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up Interrupt_A_Ack_Register and bits

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove disabled GPCT functions

The GPCT (general purpose counter timer) is handled by the ni_tio and
ni_tiocmd modules. Remove the old disabled code in this file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_INTC_STATUS_REG bits

Rename the CamelCase and convert enums into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_INTC_ENA_REG bits

Rename the CamelCase and convert enums into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CDO_MODE_REG bits

Rename the CamelCase and convert enums into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove BUG() check in ni_cdio_cmd()

The cmd->scan_begin_src was validated in ni_cdio_cmdtest() and can only
be TRIG_EXT. Remove the switch statement and unnecessary BUG() check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CDI_MODE_REG bits

Rename the CamelCase and convert enums into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CDIO_CMD_REG bits

Rename the CamelCase and convert enums into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CDIO_STATUS_REG bits

Rename the CamelCase and convert enums into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CDIO_DMA_SEL_REG bits

Rename the CamelCase and convert enums into macros to set the
bits in this register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_PFI_FILTER_REG bits

Rename the CamelCase and convert the inline helper functions
that set the bits in this register to macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_PFI_OUT_SEL_REG bits

Rename the CamelCase and convert the inline helper functions
that set/get the bits in this register to macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CAL_PWM_REG bits

Rename the CamelCase and convert the inline helper functions
that set the bits in this register to macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_AO_REF_ATTENUATION_REG bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_AO_CFG_BANK_REG bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_AI_CFG_BYPASS_FIFO_REG bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits. Convert the inline helper functions into
macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_PLL_STATUS_REG bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_PLL_CTRL_REG bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.

Convert the inline functions MSeries_PLL_Divisor_Bits() and
MSeries_PLL_Multiplier_Bits() to macros. The helper function
ni_mseries_get_pll_parameters() always returns valid values for the
'divisor' and 'multiplier' so the sanity checking can safely be
removed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_CLK_FOUT2_REG bits

Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.

Convert the inline function MSeries_PLL_In_Source_Select_RTSI_Bits()
to a macro. The caller always passes valid values for 'RTIS_channel'
so the sanity checking can safely be removed.

Tidy up ni_mseries_set_pll_master_clock() to remove the unnecessary
extra indent level for the code that sets a RTSI channel for the
PLL source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up NI_M_AI_CFG_FIFO_DATA_REG bits

Rename all the CamelCase and convert the enum and helper functions
into defines. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: rename M_Offset_* symbols

Renamme these CamelCase symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: simplify MSeries_AI_Config_Bank_Bits()

Simplify this helper function by using a bit-shift to set the high
banks select bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: reg_type is not needed by MSeries_AI_Config_Bank_Bits()

This helper function sets the bits in the M_Offset_AI_Config_FIFO_Data register
to select the correct bank to configure a given analog output channel. The NI
M Series boards are defined by the boardinfo to have 16, 32, or 80 channels.
Only 2 of the M Series boards have 80 channels, those boards happen to have a
reg_type of ni_reg_622x.

The bank for the 16 and 32 channel boards is selected by the 'channel & 0x30'
calculation (comedi channels 0 to 15 or 31). This also selects the bank for the
first 64 channels of the 80 channel boards. The additional '|= 0x400' sets the
bank to access the extra channels (comedi channels >= 63).

Since all the non ni_reg_622x boards have at most 32 channels, the extra check
of the 'reg_type' is not required in this function. Remove it as well as the
parameter.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up M_Offset_* values

For aesthetics, define the M_Offset_* values instead of using an enum.

Convert the inline helpers used to get some of the M-Series register
offsets into macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: simplify ni_m_series_set_pfi_routing()

This function is overly complex due to the M_Offset_PFI_Output_Select()
helper using a 1 based index for the registers and the private data using
a 0 based index for the cached values.

Modify the M_Offset_PFI_Output_Select() helper to use a 0 based index and
remove the sanity check which can never happen. The 'n' value passed is
calculated from the subdevice channel which will always be in range.

Tidy up the function by using a local variable to mask/set the pfi output
select bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: open code the M-Series GPCT register offsets

Remove the enum m_series_register_offsets values that are only used in
the lookup tables for the GPCT to STC register mapping and just open
code the values. Having the extra level of indirection does not add any
additional clarity and it gets rid of some of the CamelCase symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: refactor gpct to stc register handling

The NI General Purpose Counter Timer (gpct) registers are mapped to the
STC registers with a big switch statement. Create a lookup table to handle
the mapping ot the registers. This is easier to maintain.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: open code the M-Series regmap offsets

Remove the enum m_series_register_offsets values that are only used in
the lookup tables for the STC to M-Series register mapping and just open
code the values. Having the extra level of indirection does not add any
additional clarity and it gets rid of some of the CamelCase symbols.

Some of the registers are not currently used by the driver so the mappings
were not present in the original switch code. Add the missing register
mappings to the lookup tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: refactor m-series stc register handling

For M-Series boards (devpriv->is_m_series), the STC registers need to be
remapped. This is currently handled with some big switch statements to
convert the STC register offset to the M-Series offset. Some of the
registers also need special handling due to differences in the register
size on the M-Series boards.

Create some lookup tables to handle the remapping of the read and write
registers. These are easier to maintain and can contain the register size
so that a common function can be used instead of the separate helpers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-v4.2a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, functionality and cleanups for the 4.2 cycle

New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.

New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.

Cleanups
* st sensors - more helpful error message if device id wrong or irq request
  fails, explicitly make the Block Data Update optional rather
  than relying on writes to address 0 not doing anything, make interrupt
  support optional (Not always wired, and not all devices actually have
  an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
  id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
  management, optimize power usage by powering down when possible, rename
  the gpio interrupt pin to be more useful, trivial return path simplification,
  trivial formatting fixes.
* isl29018 -  move towards ABI compliance with a view to moving this driver
  out of staging, add some brackets to ensure code works as expected.  Note
  there is no actual bug as the condition being tested is always true
  (with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
  fix a parameter sanity check that always fails (bug introduced
  earlier in this series), ACPI enumeration support,
  interrupt rate control support, interrupt support in general and
  integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
  after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
  add emissivity setting, add device tree binding documentation,
  fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.

staging: unisys: uislib.h: Remove unused cache allocation prototypes

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset: Remove unused cache allocator

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove wrapper around parser_init_guts()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: parser_init_guts(): standard_payload_header is always false

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: parser: Remove unused functions and mark others static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset: Declare parser_init_byte_stream() static

In addition remove unused parser_init()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel: Make visorchannel_create take a gfp_t

This allows the caller to specify an appropriate GFP flag instead of
hardcoding the lowest common denominator.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove visorutil from top level Makefile

The visorutil directory is still mentioned in the top level makefile for
the Unisys drivers, so remove it.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix visorbus Kconfig

Removing visorutil made it impossible to build visorbus. Remove the config
setting from the Kconfig so the module can be enabled in the build.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move periodic_work.c into the visorbus directory

This patch removes visorutil directory, move periodic_work.c into
the visorbus directory.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove timskmod.h and procobjecttree.h

This patch move the needed linux include files from timskmod.h
to the files that calls those include. Also procobjecttree.h is
removed since it is dead code.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove charqueue.c

This patch removes charqueue.[ch] since it no longer called

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move timskmod.h functionality

This patch removes all timksmod.h pound defines. It also removes
visorkmodutils.c since it no longer has any use by itself. Since
visorkmodutils.c is no longer needed the module_init for
visorchipset.c is modified to call visorutil_spar_detect directly
instead of the extern variable in timksmod.h.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: add ACPI and PCI requirement to Kconfig

Later patches will require PCI and ACPI support in the kernel, so add these
features to the Kconfig.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>