drm/amdgpu/powerplay: Add special avfs cases for some polaris asics (v3)

Add special avfs handling for some polaris variants.

v2: fix copy paste typo.
v3: fix asic rid check

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove set but not used variable 'grbm_soft_reset'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function 'gfx_v8_0_pre_soft_reset':
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:4950:27: warning:
 variable 'srbm_soft_reset' set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function 'gfx_v8_0_post_soft_reset':
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:5054:27: warning:
 variable 'srbm_soft_reset' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit d31a501ead7f ("drm/amdgpu: add
pre_soft_reset ip func") and e4ae0fc33631 ("drm/amdgpu: implement
gfx8 post_soft_reset")

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Limit vm max ctx number to 4096

driver need to reserve resource for each ctx for
some hw features. so add this limitation.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bypass RLC init under sriov for Tonga (v2)

RLC will go wrong in soft_reset under sriov

Workaroound: only need to init RLC csb, and skip RLC stop, reset, start
    this is because host-driver has already done full initialization on RLC

v2: squash in build fix

Signed-off-by: Tiecehng Zhou <Tiecheng.Zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move IV prescreening into the GMC code

The GMC/VM subsystem is causing the faults, so move the handling here as
well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove VM fault_credit handling

printk_ratelimit() is much better suited to limit the number of reported
VM faults.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: send IVs to the KFD only after processing them v3

This allows us to filter out VM faults in the GMC code.

v2: don't filter out all faults
v3: fix copy&paste typo, send all IV to the KFD, don't change message level

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add support for doorbell BOs

This allows user mode to map doorbell pages into GPUVM address space.
That way GPUs can submit to user mode queues (self-dispatch).

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add DMABuf import functionality

This is used for interoperability between ROCm compute and graphics
APIs. It allows importing graphics driver BOs into the ROCm SVM
address space for zero-copy GPU access.

The API is split into two steps (query and import) to allow user mode
to manage the virtual address space allocation for the imported buffer.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add NULL-pointer check

top_dev->gpu is NULL for CPUs. Avoid dereferencing it if NULL.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add KFD VRAM limit checking

We don't want KFD processes evicting each other over VRAM usage.
Therefore prevent overcommitting VRAM among KFD applications with
a per-GPU limit. Also leave enough room for page tables on top
of the application memory usage.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Workaround build failure due to trace conflict

Avoid including mmu_context.h in amdgpu_amdkfd.h since that may be
included in other header files that define traces. This leads to
conflicts due to traces defined in other headers included via
mmu_context.h.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: rv dal-pplib interface refactor powerplay part

[WHY] clarify dal input parameters to pplib interface, remove
un-used parameters. dal knows exactly which parameters needed
and their effects at pplib and smu sides.

current dal sequence for dcn1_update_clock to pplib:

1.smu10_display_clock_voltage_request for dcefclk
2.smu10_display_clock_voltage_request for fclk
3.phm_store_dal_configuration_data {
  set_min_deep_sleep_dcfclk
  set_active_display_count
  store_cc6_data --- this data never be referenced

new sequence will be:

1. set_display_count  --- need add new pplib interface
2. set_min_deep_sleep_dcfclk -- new pplib interface
3. set_hard_min_dcfclk_by_freq
4. set_hard_min_fclk_by_freq

after this code refactor, smu10_display_clock_voltage_request,
phm_store_dal_configuration_data will not be needed for rv.

[HOW] step 1: add new functions at pplib interface
      step 2: add new functions at amdgpu dm and dc

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip ring soft recovery when fence was NULL

amdgpu_ring_soft_recovery would have Call-Trace,
when s_fence->parent was NULL inside amdgpu_job_timedout.
Check fence first, as drm_sched_hw_job_reset did.

Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: Destroy psp ring when doing gpu reset

PSP ring need to be destroy before starting reinit for vf.
This patche move it from hypervisor driver into guest.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: Add support VMR ring for VF

PSP only support VMR ring for SRIOV vf since v45 and all commands will
be send to VMR ring for executing.

VMR ring use C2PMSG 101 ~ 103 instead of C2PMSG 64 ~ 71.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: Get psp fw version through reading register

If PSP FW is running already, driver will not load PSP FW again and skip
it. So psp fw version is not correct if reading it from FW binary file,
need to get right version from register.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always reserve one more shared slot for pipelined BO moves

This allows us to drop the extra reserve in TTM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always reserve two slots for the VM

And drop the now superflous extra reservations.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix using shared fence for exported BOs v2

It is perfectly possible that the BO list is created before the BO is
exported. While at it clean up setting shared to one instead of true.

v2: add comment and simplify logic

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: allow reserving more than one shared slot v3

Let's support simultaneous submissions to multiple engines.

v2: rename the field to num_shared and fix up all users
v3: rebased

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: both support PCO FP5/AM4 rlc fw

For Picasso && AM4 SOCKET board, we use picasso_rlc_am4.bin
For Picasso && FP5 SOCKET board, we use picasso_rlc.bin

Judgment method:
PCO AM4: revision >= 0xC8 && revision <= 0xCF
         or revision >= 0xD8 && revision <= 0xDF
otherwise is PCO FP5

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: check MC firmware for FFC support

Check if the MC firmware supports FFC and tell the SMC so
mclk switching is handled properly.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: update smu7_ppsmc.h

Add new messages for polaris.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: Add drm_sched_suspend/resume_timeout()

This patch adds two new functions to help client drivers suspend and
resume the scheduler job timeout. This can be useful in cases where the
hardware has preemption support enabled. Using this, it is possible to have
the timeout active only for the ring which is active on the ringbuffer.
This patch also makes the job_list_lock IRQ safe.

Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: Set sched->thread to NULL on failure

In cases where the scheduler instance is used as a base object of another
driver object, it's not clear if the driver can call scheduler cleanup on the
fail path. So, Set the sched->thread to NULL, so that the driver can safely
call drm_sched_fini() during cleanup.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/acpi: NULL check before some freeing functions is not needed

kfree(NULL) is safe, so removes NULL check before freeing the mem.
This patch also fix the ifnullfree.cocci warnings.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Alex Deucher <alexander.deucher@amd.com>
CC: christian.koenig@amd.com
CC: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
CC: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
CC: Lyude Paul <lyude@redhat.com>
CC: Rex Zhu <Rex.Zhu@amd.com>
CC: Jim Qu <Jim.Qu@amd.com>
CC: amd-gfx@lists.freedesktop.org
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include: Add mmhub 9.4 reg offsets and shift-mask

In particular, we need the mmMC_VM_XGMI_LFB_CNTL register, for
determining if xGMI is enabled on VG20. This will be used by DC to
determine the correct spread spectrum adjustment for display and audio
clocks.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/si: fix SI after doorbell rework

SI does not use doorbells, move asic doorbell init later
asic check.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=108920
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: fix clock stretcher limits on polaris (v2)

Adjust limits for newer polaris variants.

v2: fix polaris11 kicker (Jerry)

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: fix mclk switch limit on polaris

Update switch limit on newer polaris variants.  This may fix
flickering with high refresh rates with mclk switching enabled.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add tracing to dc

[Why]
Tracing is a useful and cheap debug functionality

[How]
This creates a new trace system amdgpu_dm, currently with
three trace events

amdgpu_dc_rreg and amdgpu_dc_wreg report the address and value
of any dc register reads and writes

amdgpu_dc_performance requires at least one of those two to be
enabled.  It counts the register reads and writes since the
last entry

v2: Don't check for NULL before kfree

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update XGMI node print

amdgpu_xgmi_update_topology is called both on device registration
and reset. Fix misleading print since the device is added only once to
the hive on registration and not on reset.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Implement concurrent asic reset for XGMI.

Use per hive wq to concurrently send reset commands to all nodes
in the hive.

v2:
Switch to system_highpri_wq after dropping dedicated queue.
Fix non XGMI code path KASAN error.
Stop  the hive reset for each node loop if there
is a reset failure on any of the nodes.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Handle xgmi device removal.

XGMI hive has some resources allocted on device init which
needs to be deallocated when the device is unregistered.

v2: Remove creation of dedicated wq for XGMI hive reset.
v3: Use the gmc.xgmi.supported flag

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: Update waiting in psp mode1 reset.

No point in use mdelay unless running from interrupt context (which we are not)
This is busy wait which will block the CPU for the entirety of the wait time.
Also, reduce wait time to 500ms as it is done in refernce code because
1s might cause PSP FW TO issues during XGMI hive reset.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add missing error handling

We ignored the return code here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove amdgpu_bo_backup_to_shadow

It is unused.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add a xgmi supported flag

Use this to track whether an asic supports xgmi rather than
checking the asic type everywhere.

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up for DCN1 clock debug logging

[Why]
To prepare for clock debug logging. With the exception of removing
max_supported_dppclk_khz from logs, there are no functional changes.

[How]
Add clk_bypass struct and clean up buffer logic

Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Su Chung <Su.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.08

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow clock lower on dce100

dce100 was set to always pass safe_to_lower = false
to the clock manager

Thus, on suspend the clocks were not being set to 0
which is incorrect behaviour

This was causing s3 resume to blackscreen on intel
CPUs with dce100 GPUs attached

(Note that the hash in this Fixes: tag is the hash on Alex's tree)
Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program dithering if requested

Dithering needs to be enabled or disabled as requested. If
dc_stream_update->dither_option is non-null, program the FMT blocks.

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy crc_enabled when duplicating dm_crtc_state

[Why]
When running igt@kms_plane@pixel-format-pipe-* tests the CRC read will
time out and the test will fail.

This is because the CRTC is duplicated but the crc_enabled parameter
isn't copied over to the new dm_crtc_state. CRC reads will time out
because amdgpu_dm_crtc_handle_crc_irq will no longer call
drm_crtc_add_crc_entry.

[How]
Copy crc_enabled when duplicating the state.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add customizable tracing event

[why]
add customizable log with a message input, which is for adding
test log in debugging as printf function in ETW.

[Usage]
EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC);

Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Re-arrange GFX9 fields

For more clear usage in future

Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fbc state could not reach while enable fbc

   [WHY] fbc is within the data path from memory to dce. while
   re-configure mc dmif, fbc should be enabled. otherwise, fbc
   may not be enabled properly.

   [HOW] before re-configure mc dmif, disable fbc, only after
   dmif re-configuration fully done, enable fbc again.

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Info frame cleanup

* Use provided infopacket in stream (if valid) instead of reconstructing
  in set_vendor_info_packet()
* Use proper format for enums
* Use dc info packet struct instead

Signed-off-by: Harmanprit Tatla <Harmanprit.Tatla@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: CTS 4.2.2.7

[Why]
Failure to read Detailed Capabilities Info.

[How]
Read Detailed Capbilities Info 80h-08Fh.

Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix spelling of axis in modules/color/color_gamma.c

Use axis instead of axix

Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused panel patch "disconnect_delay"

[Why]
This patch is for use by dm, no need for it in dc.

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Start documentation of DC

[Why]
There are a lot of unintuitive parts of the dm-dc interface.
It would help us if these were documented to provide
a common understanding of what they are supposed to do

[How]
Most of this documentation is stubs, to be filled out more
thoroughly by the experts

Not every dm-accessible function and struct is mentioned.
Simple functions like getters, setters, retain, release,
create, destroy can be left unadorned.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.07

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix sporadic multiple aux transaction failure

[why]
When there are multiple aux transaction in parallel, it is sometime
sporadically the aux transaction starts to continuously fail. The
aux transaction was failing because the busy bit for the given gpio
pin was always set. The busy bit was alway set because the
programming sequence to read, modify and write busy bit was not
atomic. Due to which when multiple threads are trying to modify the
busy bits for their gpio pins in the same integer variable sometimes
the busy bits integer variable is written with old data causing
failure.

[how]
Instead of using individual bits to track gpio pins and grouping
them to integers, one byte will be allcoated for each gpio pin.
Now whenever a gpio pin needs to be set to mark being used, only
writing a value of one to that byte is sufficient, other bytes
are not impacted. Also no need to have atomicity with bytes unlike
with bits.

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: wait for IB test on first device open

Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN JPEG support amdgpu_ctx_num_entities

Looks like it was missed when setting support was added.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't expose fan attributes on APUs

They don't have a fan controller.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix num_doorbell calculation issue

When paging queue is enabled, it use the second page of doorbell.
The AMDGPU_DOORBELL64_MAX_ASSIGNMENT definition assumes all the
kernel doorbells are in the first page. So with paging queue enabled,
the total kernel doorbell range should be original num_doorbell plus
one page (0x400 in dword), not *2.

Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: fix LRU handling in ttm_buffer_object_transfer

We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.

When it is added to the LRU we can run into a race between destroying
and evicting it again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix NULL ptr deref for commit_planes_to_stream

[Why]
With scaling, underscan and abm changes we can end up calling
commit_planes_to_stream in commit_tail. This call uses dm_state->context
which can be NULL if the commit was a fast update.

[How]
Use dc_state instead since that can't be NULL unless the system ran
out of memory.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108912
Fixes: e64abff2f133 ("drm/amd/display: Use private obj helpers for dm_atomic_state")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix NULL ptr when calculating refresh rate

Calculate preferred refresh rate only when preferred mode exists.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix 6x4K displays light-up on Vega20

[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.

[How]
Update min_dcfclock_khz based on min_engine_clock value.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: radeon: fix overflow on 32bit systems

the type mem->start is unsigned long, so this can overflow on
32bit system, since the type addr is uint64_t.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: fix spelling mistake "dependancy" -> "dependency"

There are spelling mistakes in PP_ASSERT_WITH_CODE messages, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reorder uvd ring init before uvd resume

As amd_uvd_resume() accesses the uvd ring, it must be initialised first
or else we trigger errors like:

[    5.595963] [drm] Found UVD firmware Version: 1.87 Family ID: 17
[    5.595969] [drm] PSP loading UVD firmware
[    5.596266] ------------[ cut here ]------------
[    5.596268] ODEBUG: assert_init not available (active state 0) object type: timer_list hint:           (null)
[    5.596285] WARNING: CPU: 0 PID: 507 at lib/debugobjects.c:329 debug_print_object+0x6a/0x80
[    5.596286] Modules linked in: amdgpu(+) hid_logitech_hidpp(+) chash gpu_sched amd_iommu_v2 ttm drm_kms_helper crc32c_intel drm hid_sony ff_memless igb hid_logitech_dj nvme dca i2c_algo_bit nvme_core wmi pinctrl_amd uas usb_storage
[    5.596299] CPU: 0 PID: 507 Comm: systemd-udevd Tainted: G        W         4.20.0-0.rc1.git4.1.fc30.x86_64 #1
[    5.596301] Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 0901 07/23/2018
[    5.596303] RIP: 0010:debug_print_object+0x6a/0x80
[    5.596305] Code: 8b 43 10 83 c2 01 8b 4b 14 4c 89 e6 89 15 e6 82 b0 02 4c 8b 45 00 48 c7 c7 60 fd 34 a6 48 8b 14 c5 a0 da 08 a6 e8 6a 6a b8 ff <0f> 0b 5b 83 05 d0 45 3e 01 01 5d 41 5c c3 83 05 c5 45 3e 01 01 c3
[    5.596306] RSP: 0018:ffffa02ac863f8c0 EFLAGS: 00010282
[    5.596307] RAX: 0000000000000000 RBX: ffffa02ac863f8e0 RCX: 0000000000000006
[    5.596308] RDX: 0000000000000007 RSI: ffff9160e9a7bfe8 RDI: ffff9160f91d6c60
[    5.596310] RBP: ffffffffa6742740 R08: 0000000000000002 R09: 0000000000000000
[    5.596311] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa634ff69
[    5.596312] R13: 00000000000b79d0 R14: ffffffffa80f76d8 R15: 0000000000266000
[    5.596313] FS:  00007f762abf7940(0000) GS:ffff9160f9000000(0000) knlGS:0000000000000000
[    5.596314] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.596315] CR2: 000055fdc593f000 CR3: 00000007e999c000 CR4: 00000000003406f0
[    5.596317] Call Trace:
[    5.596321]  debug_object_assert_init+0x14a/0x180
[    5.596327]  del_timer+0x2e/0x90
[    5.596383]  amdgpu_fence_process+0x47/0x100 [amdgpu]
[    5.596430]  amdgpu_uvd_resume+0xf6/0x120 [amdgpu]
[    5.596475]  uvd_v7_0_sw_init+0xe0/0x280 [amdgpu]
[    5.596523]  amdgpu_device_init.cold.30+0xf97/0x14b6 [amdgpu]
[    5.596563]  ? amdgpu_driver_load_kms+0x53/0x330 [amdgpu]
[    5.596604]  amdgpu_driver_load_kms+0x86/0x330 [amdgpu]
[    5.596614]  drm_dev_register+0x115/0x150 [drm]
[    5.596654]  amdgpu_pci_probe+0xbd/0x120 [amdgpu]
[    5.596658]  local_pci_probe+0x41/0x90
[    5.596661]  pci_device_probe+0x188/0x1a0
[    5.596666]  really_probe+0xf8/0x3b0
[    5.596669]  driver_probe_device+0xb3/0xf0
[    5.596672]  __driver_attach+0xe1/0x110
[    5.596674]  ? driver_probe_device+0xf0/0xf0
[    5.596676]  bus_for_each_dev+0x79/0xc0
[    5.596679]  bus_add_driver+0x155/0x230
[    5.596681]  ? 0xffffffffc07d9000
[    5.596683]  driver_register+0x6b/0xb0
[    5.596685]  ? 0xffffffffc07d9000
[    5.596688]  do_one_initcall+0x5d/0x2be
[    5.596691]  ? rcu_read_lock_sched_held+0x79/0x80
[    5.596693]  ? kmem_cache_alloc_trace+0x264/0x290
[    5.596695]  ? do_init_module+0x22/0x210
[    5.596698]  do_init_module+0x5a/0x210
[    5.596701]  load_module+0x2137/0x2430
[    5.596703]  ? lockdep_hardirqs_on+0xed/0x180
[    5.596714]  ? __do_sys_init_module+0x150/0x1a0
[    5.596715]  __do_sys_init_module+0x150/0x1a0
[    5.596722]  do_syscall_64+0x60/0x1f0
[    5.596725]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[    5.596726] RIP: 0033:0x7f762b877dee
[    5.596728] Code: 48 8b 0d 9d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6a 20 0c 00 f7 d8 64 89 01 48
[    5.596729] RSP: 002b:00007ffc777b8558 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    5.596730] RAX: ffffffffffffffda RBX: 000055fdc48da320 RCX: 00007f762b877dee
[    5.596731] RDX: 00007f762b9f284d RSI: 00000000006c5fc6 RDI: 000055fdc527a060
[    5.596732] RBP: 00007f762b9f284d R08: 0000000000000003 R09: 0000000000000002
[    5.596733] R10: 000055fdc48ad010 R11: 0000000000000246 R12: 000055fdc527a060
[    5.596734] R13: 000055fdc48dca20 R14: 0000000000020000 R15: 0000000000000000
[    5.596740] irq event stamp: 134618
[    5.596743] hardirqs last  enabled at (134617): [<ffffffffa513d52e>] console_unlock+0x45e/0x610
[    5.596744] hardirqs last disabled at (134618): [<ffffffffa50037e8>] trace_hardirqs_off_thunk+0x1a/0x1c
[    5.596746] softirqs last  enabled at (133146): [<ffffffffa5e00365>] __do_softirq+0x365/0x47c
[    5.596748] softirqs last disabled at (133139): [<ffffffffa50c64f9>] irq_exit+0x119/0x120
[    5.596749] ---[ end trace eaee508abfebccdc ]---

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108709
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor GPU reset for XGMI hive case

For XGMI hive case do reset in steps where each step iterates over
all devs in hive. This especially important for asic reset
since all PSP FW in hive must come up within a limited time
(around 1 sec) to properply negotiate the link.
Do this by  refactoring  amdgpu_device_gpu_recover and amdgpu_device_reset
into pre_asic_reset, asic_reset and post_asic_reset functions where is part
is exectued for all the GPUs in the hive before going to the next step.

v2: Update names for amdgpu_device_lock/unlock functions.

v3: Introduce per hive locking to avoid multiple resets for GPUs
    in same hive.
v4:
Remove delayed_workqueue()/ttm_bo_unlock_delayed_workqueue() - they
are copy & pasted over from radeon and on amdgpu there isn't
any reason for that any more.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Expose hive adev list and xgmi_mutex

It's needed for device reset of entire hive.

v3:
Add per hive lock to allow avoiding duplicate resets triggered by
multiple members  of same hive.
Expose amdgpu_hive_info instead of adding getter functions.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor amdgpu_xgmi_add_device

This is prep work for updating each PSP FW in hive after
GPU reset.
Split into build topology SW state and update each PSP FW in the hive.
Save topology and count of XGMI devices for reuse.

v2: Create seperate header for XGMI.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set FreeSync state using drm VRR properties

Support for AMDGPU specific FreeSync properties and ioctls are dropped
from amdgpu_dm in favor of supporting drm variable refresh rate
properties.

The notify_freesync and set_freesync_property functions are dropped
from amdgpu_display_funcs.

The drm vrr_capable property is now attached to any DP/HDMI connector.
Its value is updated accordingly to the connector's FreeSync capabiltiy.

The freesync_enable logic and ioctl control has has been dropped in
favor of utilizing the vrr_enabled on the drm CRTC. This allows for more
fine grained atomic control over which CRTCs should support variable
refresh rate.

To handle state changes for vrr_enabled it was easiest to drop the
forced modeset on freesync_enabled change. This patch now performs the
required stream updates when planes are flipped.

This is done for a few reasons:

(1) VRR stream updates can be done in the fast update path

(2) amdgpu_dm_atomic_check would need to be hacked apart to check
    desired variable refresh state and capability before the CRTC
    disable pass.

(3) Performing VRR stream updates on-flip is needed for enabling BTR
    support.

VRR packets and timing adjustments are now tracked and compared to
previous values sent to the hardware.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct get_crtc_scanoutpos behavior when vpos >= vtotal

When variable refresh rate is active the hardware counter can return
a position >= vtotal. This results in a vpos being returned from
amdgpu_display_get_crtc_scanoutpos that's a positive value. The
positive value indicates to the caller that the display is
currently in scanout when the display is actually still in vblank.

This is because the vfront porch duration is unknown with variable
refresh active and will end when either a page flip occurs or the
timeout specified by the driver/display is reached.

The behavior of the amdgpu_display_get_crtc_scanoutpos remains the
same when the position is below vtotal. When the position is above
vtotal the function will return a value that is effectively -vbl_end,
the size of the vback porch.

The only caller affected by this change is the DRM helper for
calculating vblank timestamps. This change corrects behavior for
calculating the page flip timestamp from being the previous timestamp
to the calculation to the next timestamp when position >= vtotal.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Document variable refresh properties

These include the drm_connector 'vrr_capable' and the drm_crtc
'vrr_enabled' properties.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Add vrr_enabled property to drm CRTC

This patch introduces the 'vrr_enabled' CRTC property to allow
dynamic control over variable refresh rate support for a CRTC.

This property should be treated like a content hint to the driver -
if the hardware or driver is not capable of driving variable refresh
timings then this is not considered an error.

Capability for variable refresh rate support should be determined
by querying the vrr_capable drm connector property.

It is worth noting that while the property is intended for atomic use
it isn't filtered from legacy userspace queries. This allows for Xorg
userspace drivers to implement support.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Add vrr_capable property to the drm connector

Modern display hardware is capable of supporting variable refresh rates.
This patch introduces the "vrr_capable" property on the connector to
allow userspace to query support for variable refresh rates.

Atomic drivers should attach this property to connectors that are
capable of driving variable refresh rates using
drm_connector_attach_vrr_capable_property().

The value should be updated based on driver and hardware capability
by using drm_connector_set_vrr_capable_property().

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move doorbell structures to seperate file

Move doorbell structures, enum definitions and helper functions
from amdgpu.h to amdgpu_doorbell.h. No functional change

Signed-off-by: Oak Zeng <ozeng@amd.com>
Proposed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use asic specific doorbell index instead of macro definition

ASIC specific doorbell layout is used instead of enum definition

Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Call doorbell index init on device initialization

Also call functioin amdgpu_device_doorbell_init after
amdgpu_device_ip_early_init because the former depends
on the later to set up asic-specific init_doorbell_index
function

Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Doorbell layout for vega20 and future asic

This introduces new doorbell layout for vega20 and future asics

v2: Use enum definition instead of hardcoded value

Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Doorbell index initialization for ASICs before vega10

Initialize doorbell index for asics vi and cik

v2: Use enum definition instead of hardcoded number

Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Vega10 doorbell index initialization

v2: Use enum definition instead of hardcoded value
v3: Remove unused enum definition

Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add asic func interface to init doorbell index

This is preparation to move doorbell index initialization
to amdgpu_asic_funcs

Signed-off-by: Oak Zeng <ozeng@amd.com>
Proposed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add field in amdgpu_dev to hold reserved doorbell index

This is a preparation work to make reserved doorbell index per device,
instead of using a global macro definition. By doing this, we can easily
change doorbell layout for future ASICs while not affecting ASICs in
production.

Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix compile error with ACPI disabled

The fallback code for getting default backlight caps was using
the wrong variable name.  Fix it.

Fixes: https://lists.freedesktop.org/archives/dri-devel/2018-November/197752.html
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use private obj helpers for dm_atomic_state

[Why]
Two non-blocking commits in succession can result in a sequence where
the same dc->current_state is queried for both commits.

1. 1st commit -> check -> commit -> swaps atomic state -> queues work
2. 2nd commit -> check -> commit -> swaps atomic state -> queues work
3. 1st commit work finishes

The issue with this sequence is that the same dc->current_state is
read in both atomic checks. If the first commit modifies streams or
planes those will be missing from the dc->current_state for the
second atomic check. This result in many stream and plane errors in
atomic commit tail.

[How]
The driver still needs to track old to new state to determine if the
commit in its current implementation. Updating the dc_state in
atomic tail is wrong since the dc_state swap should be happening as
part of drm_atomic_helper_swap_state *before* the worker queue kicks
its work off.

The simplest replacement for the subclassing (which doesn't properly
manage the old to new atomic state swap) is to use the drm private
object helpers. While some of the dc_state members could be merged
into dm_crtc_state or dm_plane_state and copied over that way it is
easier for now to just treat the whole dc_state structure as a single
private object.

This allows amdgpu_dm to drop the dc->current_state copy from within
atomic check. It's replaced by a copy from the current atomic state
which is propagated correctly for the sequence described above.

Since access to the dm_state private object is now locked this should
also fix issues that could arise if submitting non-blocking commits
from different threads.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/sched: revert "fix timeout handling v2" v2

This reverts commit 0efd2d2f68cd5dbddf4ecd974c33133257d16a8e.

It's still causing problems for V3D.

v2: keep rearming the timeout.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix spelling mistake "Pramater" -> "Parameter"

There is a spelling mistake in the module description text and
a comment too, fix them. Also line break overly long comment.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicate header

Remove dce/dce_mem_input.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdkfd: Remove duplicate header

Remove gca/gfx_8_0_enum.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Remove duplicate header

Remove drm/drm_fb_helper.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Query and use ACPI backlight caps

ACPI ATIF has a function called query
backlight transfer characteristics.  Among the
information returned by this function is
the minimum and maximum input signals for the
backlight

Call that function on ACPI init.  When DM
backlight device is updated, copy over the
backlight caps into DM, but only once.  Use
the backlight caps in the backlight-to-dc
calculation

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: update ATIF functions in AMD ACPI header

The ACPI interface in AMD was a few years out of date
and contained some unused and deprecated functions

Remove functions: Select Active Displays, Get Lid State,
Get TV Standard, Set TV Standard, Get Panel Expansion Mode,
Set Panel Expansion Mode, Get Graphics Device Types

Add functions: Query Backlight Transfer Characteristics,
Ready To Undock Notification

Changed functions: Get System Parameters,
Get System BIOS Requests

All changes are right from the standard
ATI ACPI Control Methods V0.44

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add abm level drm property

Adaptive Backlight Management (ABM) is a feature
that reduces backlight level to save power, while
increasing pixel contrast and pixel luminance
to maintain readability and image quality.

ABM will adjust in response to the
pixel luminance of the displayed content.

ABM is made available as a drm property on eDP
monitors called "abm level", which ranges from 0 to 4.
When this property is set to 0, ABM is off.  Levels 1
to 4 represent different ranges of backlight reduction.
At higher levels both the backlight reduction and pixel
adjustment will be greater.

ABM requires DMCU firmware, which is currently available for
Raven ASICs only.  If the feature does not work, please
ensure your firmware is up to date.

v2:
Fix commit message, only attach property if DMCU loaded
v3:
Store ABM level in crtc state to accommodate dc
v4:
Fix ABM saving on dpms cycle

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Load DMCU IRAM

DMCU IRAM must be loaded by the driver before DMCU
can function.

Move the IRAM code out of the shadows and into a new file
modules/power/power_helpers.c

The IRAM table contains the backlight curve and ABM parameters

Add this new file to the Makefiles

Call dmcu_load_iram in late init of DM

Move struct dmcu_version from dc.h to dmcu.h to allow
dmcu to be included on its own

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix static checker warning

drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c:49 amdgpu_allocate_static_csa()
error: uninitialized symbol 'ptr'.

the test if (!bo) doesn't work, as the bo is a pointer to a pointer.
if bo create failed, the *bo will be set to NULL.
so change to test *bo.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd:Enable/Disable NBPSTATE on On/OFF of UVD

We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
In this patch ,disabling low memory P state only when video
size >= 4k.
Multiple runs of power measurement shows no impact

Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay:add hwmgr callback to update nbpstate on Carrizo

Add hwmgr callback "update_nbdpm_pstate".This will use to access
"cz_nbdpm_pstate_enable_disable" function to enable/disable low
memory pstate.

Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD"

This reverts commit dbd8299c32f6f413f6cfe322fe0308f3cfc577e8.

Reason for revert:
This patch sends  msg PPSMC_MSG_DisableLowMemoryPstate(0x002e)
in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008).
This leads to SMU failing to service the request as it is
dependent on UVD to be powered ON, since it accesses UVD
registers.

This msg should ideally be sent only when the UVD is about to decode
a 4k video.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix Scaling (RMX_*) for DC driver

Before:
We use drm_match_cea_mode() to get the vic for any mode we
want to set, most of the time vic will be different for the new mode.

DC uses memcmp to check if timing changed, in this case DC will
say timing changed and we endup doing a full modeset.

Current:
Now we check if !RMX_OFF and old_refresh == new_refresh if so
we copy the vic from old timing. In a case where we are currently on
a lower timing and want to change to higher mode, stream->dst will be
different and cause us to do a full modeset, which is what we want.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set RMX_ASPECT as default

Setting this allows for display scaling by default

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dereference of pointer fs_params before it is null checked

Currently there are several instances of pointer fs_params being
dereferenced before fs_params is being null checked.  Fix this by
only dereferencing fs_params after the null check.

Detected by CoverityScan, CID#1475565 ("Dereference before null check")

Fixes: e1e8a020c6b8 ("drm/amd/display: Add support for Freesync 2 HDR and Content to Display Mapping")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/amdgpu_dm/amdgpu_dm.c: Remove duplicate header

Remove dm_services_types.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>