regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET

[ Upstream commit c3e3ca05dae37f8f74bb80358efd540911cbc2c8 ]

Since the introduction of regulator->enable_count, a driver that did
an exclusive get on an already-enabled regulator would end up with
enable_count initialized to 0 but rdev->use_count initialized to 1.
With that starting point the regulator is effectively stuck enabled,
because if the driver attempted to disable it it would fail the
enable_count underflow check in _regulator_handle_consumer_disable().

The EXCLUSIVE_GET path in _regulator_get() now initializes
enable_count along with rdev->use_count so that the regulator can be
disabled without underflowing the former.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 5451781dadf85 ("regulator: core: Only count load for enabled consumers")
Link: https://lore.kernel.org/r/20220505043152.12933-1-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: fix types in copy_highpage()

[ Upstream commit 921d161f15d6b090599f6a8c23f131969edbd1fa ]

In copy_highpage() the `kto` and `kfrom` local variables are pointers to
struct page, but these are used to hold arbitrary pointers to kernel memory
. Each call to page_address() returns a void pointer to memory associated
with the relevant page, and copy_page() expects void pointers to this
memory.

This inconsistency was introduced in commit 2563776b41c3 ("arm64: mte:
Tags-aware copy_{user_,}highpage() implementations") and while this
doesn't appear to be harmful in practice it is clearly wrong.

Correct this by making `kto` and `kfrom` void pointers.

Fixes: 2563776b41c3 ("arm64: mte: Tags-aware copy_{user_,}highpage() implementations")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220420030418.3189040-3-tongtiangen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Cleanup the control_va_addr_alignment() __setup handler

[ Upstream commit 1ef64b1e89e6d4018da46e08ffc32779a31160c7 ]

Clean up control_va_addr_alignment():

a. Make '=' required instead of optional (as documented).
b. Print a warning if an invalid option value is used.
c. Return 1 from the __setup handler when an invalid option value is
   used. This prevents the kernel from polluting init's (limited)
   environment space with the entire string.

Fixes: dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220315001045.7680-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value

[ Upstream commit f03a9670d27d23fe734a456f16e2579b21ec02b4 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 04f605906ff0 ("irqchip: Add Aspeed SCU interrupt controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220423094227.33148-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value

[ Upstream commit 50f0f26e7c8665763d0d7d3372dbcf191f94d077 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: f48e699ddf70 ("irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220423094227.33148-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/exiu: Fix acknowledgment of edge triggered interrupts

[ Upstream commit 4efc851c36e389f7ed432edac0149acc5f94b0c7 ]

Currently the EXIU uses the fasteoi interrupt flow that is configured by
it's parent (irq-gic-v3.c). With this flow the only chance to clear the
interrupt request happens during .irq_eoi() and (obviously) this happens
after the interrupt handler has run. EXIU requires edge triggered
interrupts to be acked prior to interrupt handling. Without this we
risk incorrect interrupt dismissal when a new interrupt is delivered
after the handler reads and acknowledges the peripheral but before the
irq_eoi() takes place.

Fix this by clearing the interrupt request from .irq_ack() if we are
configured for edge triggered interrupts. This requires adopting the
fasteoi-ack flow instead of the fasteoi to ensure the ack gets called.

These changes have been tested using the power button on a
Developerbox/SC2A11 combined with some hackery in gpio-keys so I can
play with the different trigger mode [and an mdelay(500) so I can
can check what happens on a double click in both modes].

Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503134541.2566457-1-daniel.thompson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: Fix return value of __setup handlers

[ Upstream commit 12441ccdf5e2f5a01a46e344976cbbd3d46845c9 ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled. A return
of 0 causes the boot option/value to be listed as an Unknown kernel
parameter and added to init's (limited) argument (no '=') or environment
(with '=') strings. So return 1 from these x86 __setup handlers.

Examples:

  Unknown kernel command line parameters "apicpmtimer
    BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable", will be
    passed to user space.

  Run /sbin/init as init process
   with arguments:
     /sbin/init
     apicpmtimer
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc8
     vdso=1
     ring3mwait=disable

Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Fixes: 77b52b4c5c66 ("x86: add "debugpat" boot option")
Fixes: e16fd002afe2 ("x86/cpufeature: Enable RING3MWAIT for Knights Landing")
Fixes: b8ce33590687 ("x86_64: convert to clock events")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220314012725.26661-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: don't hold RTNL in color change request

[ Upstream commit 1b550a0bebfc0b69d6ec08fe6eb58953a8aec48a ]

It's not necessary to hold the RTNL across color change
requests, since all the inner locking needs only the
wiphy mutex which we already hold as well.

Fixes: 0d2ab3aea50b ("nl80211: add support for BSS coloring")
Link: https://lore.kernel.org/r/20220414140402.32e03e8c261b.I5e7dc6bc563a129b938c43298da6bb4e812400a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_blk: fix the discard_granularity and discard_alignment queue limits

[ Upstream commit 62952cc5bccd89b76d710de1d0b43244af0f2903 ]

The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.

On the other hand the discard_sector_alignment from the virtio 1.1 looks
similar to what Linux uses as discard granularity (even if not very well
described):

  "discard_sector_alignment can be used by OS when splitting a request
   based on alignment. "

And at least qemu does set it to the discard granularity.

So stop setting the discard_alignment and use the virtio
discard_sector_alignment to set the discard granularity.

Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Use Python devtools for version autodetection rather than runtime

[ Upstream commit 630af16eee495f583db5202c3613d1b191f10694 ]

This fixes the issue where the build will fail if only the Python2
runtime is installed but the Python3 devtools are installed. Currently
the workaround is 'make PYTHON=python3'.

Fix it by autodetecting Python based on whether python[x]-config exists
rather than just python[x] because both are needed for the build. Then
-config is stripped to find the Python runtime.

Testing
=======

 * Auto detect links with Python3 when the v3 devtools are installed
   and only Python 2 runtime is installed
 * Auto detect links with Python2 when both devtools are installed
 * Sensible warning is printed if no Python devtools are installed
 * 'make PYTHON=x' still automatically sets PYTHON_CONFIG=x-config
 * 'make PYTHON=x' fails if x-config doesn't exist
 * 'make PYTHON=python3' overrides Python2 devtools
 * 'make PYTHON=python2' overrides Python3 devtools
 * 'make PYTHON_CONFIG=x-config' works
 * 'make PYTHON=x PYTHON_CONFIG=x' works
 * 'make PYTHON=missing' reports an error
 * 'make PYTHON_CONFIG=missing' reports an error

Fixes: 79373082fa9de8be ("perf python: Autodetect python3 binary")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220309194313.3350126-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence-quadspi: fix Direct Access Mode disable for SoCFPGA

[ Upstream commit f724c296f2f2cc3f9342b0fc26239635cbed856e ]

The Cadence QSPI compatible string required for the SoCFPGA platform
changed from the default "cdns,qspi-nor" to "intel,socfpga-qspi" with
the introduction of an additional quirk in
commit 98d948eb8331 ("spi: cadence-quadspi: fix write completion support").
However, that change did not preserve the previously used
quirk for this platform.  Reinstate the `CQSPI_DISABLE_DAC_MODE` quirk
for the SoCFPGA platform.

Fixes: 98d948eb8331 ("spi: cadence-quadspi: fix write completion support")
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220427153446.10113-1-abbotti@mev.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()

[ Upstream commit f8c242908ad15bbd604d3bcb54961b7d454c43f8 ]

It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.

Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422032854.2995175-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: fix debugfs code to use enum kunit_status, not bool

[ Upstream commit 38289a26e1b8a37755f3e07056ca416c1ee2a2e8 ]

Commit 6d2426b2f258 ("kunit: Support skipped tests") switched to using
`enum kunit_status` to track the result of running a test/suite since we
now have more than just pass/fail.

This callsite wasn't updated, silently converting to enum to a bool and
then back.

Fixes: 6d2426b2f258 ("kunit: Support skipped tests")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: panel-simple: Fix proper bpc for AM-1280800N3TZQW-T00H

[ Upstream commit 7eafbecd2288c542ea15ea20cf1a7e64a25c21bc ]

AM-1280800N3TZQW-T00H panel support 8 bpc not 6 bpc as per
recent testing in i.MX8MM platform.

Fix it.

Fixes: bca684e69c4c ("drm/panel: simple: Add AM-1280800N3TZQW-T00H")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211111094103.494831-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: add missing include to msm_drv.c

[ Upstream commit 8123fe83c3a3448bbfa5b5b1cacfdfe7d076fca6 ]

Add explicit include of drm_bridge.h to the msm_drv.c to fix the
following warning:

drivers/gpu/drm/msm/msm_drv.c:236:17: error: implicit declaration of function 'drm_bridge_remove'; did you mean 'drm_bridge_detach'? [-Werror=implicit-function-declaration]

Fixes: d28ea556267c ("drm/msm: properly add and remove internal bridges")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484310/
Link: https://lore.kernel.org/r/20220430180917.3819294-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: fix error check return value of irq_of_parse_and_map()

[ Upstream commit 03371e4fbdeb7f596cbceacb59e474248b6d95ac ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return a negative value anyhow, so never enter this conditional branch.

Fixes: f6a8eaca0ea1 ("drm/msm/mdp5: use irqdomains")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483294/
Link: https://lore.kernel.org/r/20220425091831.3500487-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: check return value after calling platform_get_resource_byname()

[ Upstream commit a36e506711548df923ceb7ec9f6001375be799a5 ]

It will cause null-ptr-deref if platform_get_resource_byname() returns NULL,
we need check the return value.

Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482992/
Link: https://lore.kernel.org/r/20220422032227.2991553-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix error checks and return values for DSI xmit functions

[ Upstream commit f0e7e9ed379c012c4d6b09a09b868accc426223c ]

As noticed by Dan ([1] an the followup thread) there are multiple issues
with the return values for MSM DSI command transmission callback. In
the error case it can easily return a positive value when it should
have returned a proper error code.

This commits attempts to fix these issues both in TX and in RX paths.

[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/480501/
Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test

[ Upstream commit 2788b4efa60c1e03ac10a156f3fdbd3be0f9198c ]

At normal operation, transmit phy test pattern has to be terminated before
DP controller switch to video ready state. However during phy compliance
testing, transmit phy test pattern should not be terminated until end of
compliance test which usually indicated by unplugged interrupt.

Only stop sending the train pattern in dp_ctrl_on_stream() if we're not
doing compliance testing. We also no longer reset 'p_level' and
'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level'
are acquired from link status at previous dpcd read and we like to use
those level to start link training.

Changes in v2:
-- add more details commit text
-- correct Fixes

Changes in v3:
-- drop unnecessary braces

Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483564/
Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: reset DP controller before transmit phy test pattern

[ Upstream commit 581d69981159b00f0443d171a4b900089f34ccfe ]

DP controller state can not switch from video ready state to
transmit phy pattern state at run time. DP mainlink has to be
teared down followed by reset controller to default state to have
DP controller switch to transmit phy test pattern state and start
generate specified phy test pattern to sinker once main link setup
again.

Changes in v2:
-- correct Fixes's commit id

Fixes: 52352fe2f866 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483563/
Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: fix error check return value of irq_of_parse_and_map()

[ Upstream commit e92d0d93f86699b7b25c7906613fdc374d66c8ca ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483176/
Link: https://lore.kernel.org/r/20220424032418.3173632-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: stop event kernel thread when DP unbind

[ Upstream commit 570d3e5d28db7a94557fa179167a9fb8642fb8a1 ]

Current DP driver implementation, event thread is kept running
after DP display is unbind. This patch fix this problem by disabling
DP irq and stop event thread to exit gracefully at dp_display_unbind().

Changes in v2:
-- start event thread at dp_display_bind()

Changes in v3:
-- disable all HDP interrupts at unbind
-- replace dp_hpd_event_setup() with dp_hpd_event_thread_start()
-- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop()
-- move init_waitqueue_head(&dp->event_q) to probe()
-- move spin_lock_init(&dp->event_lock) to probe()

Changes in v4:
-- relocate both dp_display_bind() and dp_display_unbind() to bottom of file

Changes in v5:
-- cancel relocation of both dp_display_bind() and dp_display_unbind()

Changes in v6:
-- move empty event q to dp_event_thread_start()

Changes in v7:
-- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function

Changes in v8:
-- return error immediately if audio registration failed.

Changes in v9:
-- return error immediately if event thread create failed.

Changes in v10:
-- delete extra  DRM_ERROR("failed to create DP event thread\n");

Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482399/
Link: https://lore.kernel.org/r/1650318988-17580-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume

[ Upstream commit fa5186b279ecf44b14fb435540d2065be91cb1ed ]

BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3

Call trace:
  dpu_vbif_init_memtypes+0x40/0xb8
  dpu_runtime_resume+0xcc/0x1c0
  pm_generic_runtime_resume+0x30/0x44
  __genpd_runtime_resume+0x68/0x7c
  genpd_runtime_resume+0x134/0x258
  __rpm_callback+0x98/0x138
  rpm_callback+0x30/0x88
  rpm_resume+0x36c/0x49c
  __pm_runtime_resume+0x80/0xb0
  dpu_core_irq_uninstall+0x30/0xb0
  dpu_irq_uninstall+0x18/0x24
  msm_drm_uninit+0xd8/0x16c

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483255/
Link: https://lore.kernel.org/r/1650857213-30075-1-git-send-email-quic_vpolimer@quicinc.com
[DB: fixed Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Add missing headers needed by util/data.h

[ Upstream commit 4d27cf1d9de5becfa4d1efb2ea54dba1b9fc962a ]

'struct perf_data' in util/data.h uses the "u64" data type, which is
defined in "linux/types.h".

If we only include util/data.h, the following compilation error occurs:

  util/data.h:38:3: error: unknown type name ‘u64’
     u64    version;
     ^~~

Solution: include "linux/types.h." to add the needed type definitions.

Fixes: 258031c017c353e8 ("perf header: Add DIR_FORMAT feature to describe directory data")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220429090539.212448-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rk3328: fix disabling mclk on pclk probe failure

[ Upstream commit dd508e324cdde1c06ace08a8143fa50333a90703 ]

If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.

Fixes: c32759035ad2 ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/speculation: Add missing prototype for unpriv_ebpf_notify()

[ Upstream commit 2147c438fde135d6c145a96e373d9348e7076f7f ]

Fix the following warnings seen with "make W=1":

  kernel/sysctl.c:183:13: warning: no previous prototype for ‘unpriv_ebpf_notify’ [-Wmissing-prototypes]
    183 | void __weak unpriv_ebpf_notify(int new_state)
        |             ^~~~~~~~~~~~~~~~~~

  arch/x86/kernel/cpu/bugs.c:659:6: warning: no previous prototype for ‘unpriv_ebpf_notify’ [-Wmissing-prototypes]
    659 | void unpriv_ebpf_notify(int new_state)
        |      ^~~~~~~~~~~~~~~~~~

Fixes: 44a3918c8245 ("x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/5689d065f739602ececaee1e05e68b8644009608.1650930000.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()

[ Upstream commit ddf66aefd685fd46500b9917333e1b1e118276dc ]

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.

Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()

[ Upstream commit a28ed09dafee20da51eb26452950839633afd824 ]

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/pm: Fix false positive kmemleak report in msr_build_context()

[ Upstream commit b0b592cf08367719e1d1ef07c9f136e8c17f7ec3 ]

Since

  e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")

kmemleak reports this issue:

  unreferenced object 0xffff888009cedc00 (size 256):
    comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00  ........H.......
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      msr_build_context (include/linux/slab.h:621)
      pm_check_save_msr (arch/x86/power/cpu.c:520)
      do_one_initcall (init/main.c:1298)
      kernel_init_freeable (init/main.c:1370)
      kernel_init (init/main.c:1504)
      ret_from_fork (arch/x86/entry/entry_64.S:304)

Reproducer:

  - boot the VM with a debug kernel config (see
    https://github.com/multipath-tcp/mptcp_net-next/issues/268)
  - wait ~1 minute
  - start a kmemleak scan

The root cause here is alignment within the packed struct saved_context
(from suspend_64.h). Kmemleak only searches for pointers that are
aligned (see how pointers are scanned in kmemleak.c), but pahole shows
that the saved_msrs struct member and all members after it in the
structure are unaligned:

  struct saved_context {
    struct pt_regs             regs;                 /*     0   168 */
    /* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */
    u16                        ds;                   /*   168     2 */

    ...

    u64                        misc_enable;          /*   232     8 */
    bool                       misc_enable_saved;    /*   240     1 */

   /* Note below odd offset values for the remainder of this struct */

    struct saved_msrs          saved_msrs;           /*   241    16 */
    /* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */
    long unsigned int          efer;                 /*   257     8 */
    u16                        gdt_pad;              /*   265     2 */
    struct desc_ptr            gdt_desc;             /*   267    10 */
    u16                        idt_pad;              /*   277     2 */
    struct desc_ptr            idt;                  /*   279    10 */
    u16                        ldt;                  /*   289     2 */
    u16                        tss;                  /*   291     2 */
    long unsigned int          tr;                   /*   293     8 */
    long unsigned int          safety;               /*   301     8 */
    long unsigned int          return_address;       /*   309     8 */

    /* size: 317, cachelines: 5, members: 25 */
    /* last cacheline: 61 bytes */
  } __attribute__((__packed__));

Move misc_enable_saved to the end of the struct declaration so that
saved_msrs fits in before the cacheline 4 boundary.

The comment above the saved_context declaration says to fix wakeup_64.S
file and __save/__restore_processor_state() if the struct is modified:
it looks like all the accesses in wakeup_64.S are done through offsets
which are computed at build-time. Update that comment accordingly.

At the end, the false positive kmemleak report is due to a limitation
from kmemleak but it is always good to avoid unaligned members for
optimisation purposes.

Please note that it looks like this issue is not new, e.g.

  https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.net/
  https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg.de/

  [ bp: Massage + cleanup commit message. ]

Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()

[ Upstream commit 70dd83d737d8900b2d98db6dc6b928c596334d37 ]

Read back Status Register 1 to ensure that the written byte match the
received value and return -EIO if read back test failed.

Without this patch, spi_nor_write_16bit_sr_and_check() only check the
second half of the 16bit. It causes errors like spi_nor_sr_unlock()
return success incorrectly when spi_nor_write_16bit_sr_and_check()
doesn't write SR successfully.

Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220126073227.3401275-1-chentsung@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix logic for finding matching program for CO-RE relocation

[ Upstream commit 966a7509325395c51c5f6d89e7352b0585e4804b ]

Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.

Fixes: 9c82a63cf370 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Fix null pointer dereference on open failed

[ Upstream commit c7b607fa9325ccc94982774c505176677117689c ]

Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.

Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
 if (!fp)
     ^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
 fprintf(fp, "Sum: %d ", ret);

Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/v3d: Fix null pointer dereference of pointer perfmon

[ Upstream commit ce7a1ecf3f9f1fccaf67295307614511d8e11b13 ]

In the unlikely event that pointer perfmon is null the WARN_ON return path
occurs after the pointer has already been deferenced. Fix this by only
dereferencing perfmon after it has been null checked.

Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424183512.1365683-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Exclude UECxx from SFR dump list

[ Upstream commit ef60031022eb6d972aac86ca26c98c33e1289436 ]

Some devices may return invalid or zeroed data during an UIC error
condition. In addition, reading these SFRs will clear them. This means the
subsequent error handling will not be able to see them and therefore no
error handling will be scheduled.

Skip reading these SFRs in ufshcd_dump_regs().

Link: https://lore.kernel.org/r/1648689845-33521-1-git-send-email-kwmad.kim@samsung.com
Fixes: d67247566450 ("scsi: ufs: Use explicit access size in ufshcd_dump_regs")
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: qcom: Fix ufs_qcom_resume()

[ Upstream commit bee40dc167da159ea5b939c074e1da258610a3d6 ]

Clearing hba->is_sys_suspended if ufs_qcom_resume() succeeds is wrong. That
variable must only be cleared if all actions involved in a resume succeed.
Hence remove the statement that clears hba->is_sys_suspended from
ufs_qcom_resume().

Link: https://lore.kernel.org/r/20220419225811.4127248-23-bvanassche@acm.org
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Fix harmless double shift bug

[ Upstream commit 565138ac5f8a5330669a20e5f94759764e9165ec ]

These flags are supposed to be bit numbers.  Right now they cause a double
shift bug where we use BIT(BIT(2)) instead of BIT(2).  Fortunately, the bit
numbers are small and it's done consistently so it does not cause an issue
at run time.

Link: https://lore.kernel.org/r/YmFyWHf8nrrx+SHa@kili
Fixes: 5bd856256f8c ("scsi: iscsi: Merge suspend fields")
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: adjust display_v_end for eDP and DP

[ Upstream commit e18aeea7f5efb9508722c8c7fd4d32e6f8cdfe50 ]

The “DP timing” requires the active region to be defined in the
bottom-right corner of the frame dimensions which is different
with DSI. Therefore both display_h_end and display_v_end need
to be adjusted accordingly. However current implementation has
only display_h_end adjusted.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Fixes: fc3a69ec68d3 ("drm/msm/dpu: intf timing path for displayport")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/476277/
Link: https://lore.kernel.org/r/1645824192-29670-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: switch to drm_bridge_connector

[ Upstream commit caa24223463dfd75702a24daac13c93edb4aafac ]

Merge old hdmi_bridge and hdmi_connector implementations. Use
drm_bridge_connector instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211015001100.4193241-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: Modify prototype of encoder based API

[ Upstream commit 167dac97eb46c7b8a15b2195080e191bb0c9ce35 ]

Functions in the DisplayPort code that relates to individual instances
(encoders) are passed both the struct msm_dp and the struct drm_encoder.
But in a situation where multiple DP instances would exist this means
that the caller need to resolve which struct msm_dp relates to the
struct drm_encoder at hand.

Store a reference to the struct msm_dp associated with each
dpu_encoder_virt to allow the particular instance to be associate with
the encoder in the following patch.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-3-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/damon: add damon to selftests root Makefile

[ Upstream commit 678f0cdc572c5fda940cb038d70eebb8d818adc8 ]

Currently the damon selftests are not built with the rest of the
selftests. We add damon to the list of targets.

Fixes: b348eb7abd09 ("mm/damon: add user space selftests")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: overlay: do not break notify on NOTIFY_{OK|STOP}

[ Upstream commit 5f756a2eaa4436d7d3dc1e040147f5e992ae34b5 ]

We should not break overlay notifications on NOTIFY_{OK|STOP}
otherwise we might break on the first fragment. We should only stop
notifications if a *real* errno is returned by one of the listeners.

Fixes: a1d19bd4cf1fe ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: fix missing error on unsupported SPI_CS_HIGH

[ Upstream commit d5d933f09ac326aebad85bfb787cc786ad477711 ]

The hardware (except for the ROCKCHIP_SPI_VER2_TYPE2 version) does not
support active-high native chip selects. However if such a CS is configured
the core does not error as it normally should, because the
'ctlr->use_gpio_descriptors = true' line in rockchip_spi_probe() makes the
core set SPI_CS_HIGH in ctlr->mode_bits.

In such a case the spi-rockchip driver operates normally but produces an
active-low chip select signal without notice.

There is no provision in the current core code to handle this
situation. Fix by adding a check in the ctlr->setup function (similarly to
what spi-atmel.c does).

This cannot be done reading the SPI_CS_HIGH but in ctlr->mode_bits because
that bit gets always set by the core for master mode (see above).

Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20220421213251.1077899-1-luca.ceresoli@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: Preset cs-high and clk polarity in setup progress

[ Upstream commit 3a4bf922d42efa4e9a3dc803d1fd786d43e8a501 ]

After power up, the cs and clock is in default status, and the cs-high
and clock polarity dts property configuration will take no effect until
the calling of rockchip_spi_config in the first transmission.
So preset them to make sure a correct voltage before the first
transmission coming.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-5-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: Stop spi slave dma receiver when cs inactive

[ Upstream commit 869f2c94db92f0f1d6acd0dff1c1ebb8160f5e29 ]

The spi which's version is higher than ver 2 will automatically
enable this feature.

If the length of master transmission is uncertain, the RK spi slave
is better to automatically stop after cs inactive instead of waiting
for xfer_completion forever.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-4-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsnotify: fix wrong lockdep annotations

[ Upstream commit 623af4f538b5df9b416e1b82f720af7371b4c771 ]

Commit 6960b0d909cd ("fsnotify: change locking order") changed some
of the mark_mutex locks in direct reclaim path to use:
  mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);

This change is explained:
 "...It uses nested locking to avoid deadlock in case we do the final
  iput() on an inode which still holds marks and thus would take the
  mutex again when calling fsnotify_inode_delete() in destroy_inode()."

The problem is that the mutex_lock_nested() is not a nested lock at
all. In fact, it has the opposite effect of preventing lockdep from
warning about a very possible deadlock.

Due to these wrong annotations, a deadlock that was introduced with
nfsd filecache in kernel v5.4 went unnoticed in v5.4.y for over two
years until it was reported recently by Khazhismel Kumykov, only to
find out that the deadlock was already fixed in kernel v5.5.

Fix the wrong lockdep annotations.

Cc: Khazhismel Kumykov <khazhy@google.com>
Fixes: 6960b0d909cd ("fsnotify: change locking order")
Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/
Link: https://lore.kernel.org/r/20220422120327.3459282-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inotify: show inotify mask flags in proc fdinfo

[ Upstream commit a32e697cda27679a0327ae2cafdad8c7170f548f ]

The inotify mask flags IN_ONESHOT and IN_EXCL_UNLINK are not "internal
to kernel" and should be exposed in procfs fdinfo so CRIU can restore
them.

Fixes: 6933599697c9 ("inotify: hide internal kernel bits from fdinfo")
Link: https://lore.kernel.org/r/20220422120327.3459282-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtdblock: warn if opened on NAND

[ Upstream commit 96a3295c351da82d7af99b2fc004a3cf9f4716a9 ]

Warning on every translated mtd partition results in excessive log noise
if this driver is loaded:

  nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
  nand: Macronix MX30LF1G18AC
  nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
  read_bbt: found bbt at block 1023
  10 fixed-partitions partitions found on MTD device mt7621-nand
  Creating 10 MTD partitions on "mt7621-nand":
  0x000000000000-0x000000080000 : "Bootloader"
  mtdblock: MTD device 'Bootloader' is NAND, please consider using UBI block devices instead.
  0x000000080000-0x000000100000 : "Config"
  mtdblock: MTD device 'Config' is NAND, please consider using UBI block devices instead.
  0x000000100000-0x000000140000 : "Factory"
  mtdblock: MTD device 'Factory' is NAND, please consider using UBI block devices instead.
  0x000000140000-0x000002000000 : "Kernel"
  mtdblock: MTD device 'Kernel' is NAND, please consider using UBI block devices instead.
  0x000000540000-0x000002000000 : "ubi"
  mtdblock: MTD device 'ubi' is NAND, please consider using UBI block devices instead.
  0x000002140000-0x000004000000 : "Kernel2"
  mtdblock: MTD device 'Kernel2' is NAND, please consider using UBI block devices instead.
  0x000004000000-0x000004100000 : "wwan"
  mtdblock: MTD device 'wwan' is NAND, please consider using UBI block devices instead.
  0x000004100000-0x000005100000 : "data"
  mtdblock: MTD device 'data' is NAND, please consider using UBI block devices instead.
  0x000005100000-0x000005200000 : "rom-d"
  mtdblock: MTD device 'rom-d' is NAND, please consider using UBI block devices instead.
  0x000005200000-0x000005280000 : "reserve"
  mtdblock: MTD device 'reserve' is NAND, please consider using UBI block devices instead.
  mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21

This is more likely to annoy than to help users of embedded distros where
this driver is enabled by default.  Making the blockdevs available does
not imply that they are in use, and warning about bootloader partitions
or other devices which obviously never will be mounted is more confusing
than helpful.

Move the warning to open(), where it will be of more use - actually warning
anyone who mounts a file system on NAND using mtdblock.

Fixes: e07403a8c6be ("mtdblock: Warn if added for a NAND device")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220328161108.87757-1-bjorn@mork.no
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: Check for null pointer of pointer substream before dereferencing it

[ Upstream commit 011b559be832194f992f73d6c0d5485f5925a10b ]

Pointer substream is being dereferenced on the assignment of pointer card
before substream is being null checked with the macro PCM_RUNTIME_CHECK.
Although PCM_RUNTIME_CHECK calls BUG_ON, it still is useful to perform the
the pointer check before card is assigned.

Fixes: d4cfb30fce03 ("ALSA: pcm: Set per-card upper limit of PCM buffer allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220424205945.1372247-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Add missing bus flags for Innolux G070Y2-L01

[ Upstream commit 0f73a559f916b618c0c05186bd644c90cc9e9695 ]

The DE signal is active high on this display, fill in the missing bus_flags.
This aligns panel_desc with its display_timing .

Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406093627.18011-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Empty encoder capture buffers by default

[ Upstream commit 309373a3571ef7175bd9da0c9b13476a718e8478 ]

The payload size for encoder capture buffers is set by the driver upon
finishing encoding each frame, based on the encoded length returned from
hardware, and whatever header and padding length used. Setting a
non-zero default serves no real purpose, and also causes issues if the
capture buffer is returned to userspace unused, confusing the
application.

Instead, always set the payload size to 0 for encoder capture buffers
when preparing them.

Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Fixes: 082aaecff35f ("media: hantro: Fix .buf_prepare")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: max9286: fix kernel oops when removing module

[ Upstream commit 365ab7ebc24eebb42b9e020aeb440d51af8960cd ]

When removing the max9286 module we get a kernel oops:

Unable to handle kernel paging request at virtual address 000000aa00000094
Mem abort info:
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x04: level 0 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000
[000000aa00000094] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: fsl_jr_uio caam_jr rng_core libdes caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine max9271 authenc crct10dif_ce mxc_jpeg_encdec
CPU: 2 PID: 713 Comm: rmmod Tainted: G         C        5.15.5-00057-gaebcd29c8ed7-dirty #5
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : i2c_mux_del_adapters+0x24/0xf0
lr : max9286_remove+0x28/0xd0 [max9286]
sp : ffff800013a9bbf0
x29: ffff800013a9bbf0 x28: ffff00080b6da940 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000801a5b970 x22: ffff0008048b0890 x21: ffff800009297000
x20: ffff0008048b0f70 x19: 000000aa00000064 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000014 x13: 0000000000000000 x12: ffff000802da49e8
x11: ffff000802051918 x10: ffff000802da4920 x9 : ffff000800030098
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffffffffffffffff x1 : ffff00080b6da940 x0 : 0000000000000000
Call trace:
 i2c_mux_del_adapters+0x24/0xf0
 max9286_remove+0x28/0xd0 [max9286]
 i2c_device_remove+0x40/0x110
 __device_release_driver+0x188/0x234
 driver_detach+0xc4/0x150
 bus_remove_driver+0x60/0xe0
 driver_unregister+0x34/0x64
 i2c_del_driver+0x58/0xa0
 max9286_i2c_driver_exit+0x1c/0x490 [max9286]
 __arm64_sys_delete_module+0x194/0x260
 invoke_syscall+0x48/0x114
 el0_svc_common.constprop.0+0xd4/0xfc
 do_el0_svc+0x2c/0x94
 el0_svc+0x28/0x80
 el0t_64_sync_handler+0xa8/0x130
 el0t_64_sync+0x1a0/0x1a4

The Oops happens because the I2C client data does not point to
max9286_priv anymore but to v4l2_subdev. The change happened in
max9286_init() which calls v4l2_i2c_subdev_init() later on...

Besides fixing the max9286_remove() function, remove the call to
i2c_set_clientdata() in max9286_probe(), to avoid confusion, and make
the necessary changes to max9286_init() so that it doesn't have to use
i2c_get_clientdata() in order to fetch the pointer to priv.

Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: max9286: Use "maxim,gpio-poc" property

[ Upstream commit c9352df7139bc5be6642ebc8a78b40477ab32acd ]

The 'maxim,gpio-poc' property is used when the remote camera
power-over-coax is controlled by one of the MAX9286 gpio lines,
to instruct the driver about which line to use and what the line
polarity is.

Add to the max9286 driver support for parsing the newly introduced
property and use it if available in place of the usual supply, as it is
not possible to establish one as consumer of the max9286 gpio
controller.

If the new property is present, no gpio controller is registered and
'poc-supply' is ignored.

In order to maximize code re-use, break out the max9286 gpio handling
function so that they can be used by the gpio controller through the
gpio-consumer API, or directly by the driver code.

Wrap the power up and power down routines to their own function to
be able to use either the gpio line directly or the supply. This will
make it easier to control the remote camera power at run time.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: max9286: Use dev_err_probe() helper

[ Upstream commit df78b858e773967112b4444400fb7bb5bd7a9d8a ]

Use the dev_err_probe() helper, instead of open-coding the same
operation. While at it retrieve the error once and use it from
'ret' instead of retrieving it twice.

Link: https://lore.kernel.org/linux-media/20211208121756.3051565-1-niklas.soderlund+renesas@ragnatech.se
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Niklas S\xF6derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix

[ Upstream commit 2dc509305cf956381532792cb8dceef2b1504765 ]

The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to
ensure that it is within the bitmap.

drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept()
error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'

Fixes: 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220409061225.GA5447@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: wake waiters for safe and NMI contexts

[ Upstream commit 5341b93dea8c39d7612f7a227015d4b1d5cf30db ]

When printk() is called from safe or NMI contexts, it will directly
store the record (vprintk_store()) and then defer the console output.
However, defer_console_output() only causes console printing and does
not wake any waiters of new records.

Wake waiters from defer_console_output() so that they also are aware
of the new records from safe and NMI contexts.

Fixes: 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when accessing the main log buffer in NMI")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-6-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: add missing memory barrier to wake_up_klogd()

[ Upstream commit 1f5d783094cf28b4905f51cad846eb5d1db6673e ]

It is important that any new records are visible to preparing
waiters before the waker checks if the wait queue is empty.
Otherwise it is possible that:

- there are new records available
- the waker sees an empty wait queue and does not wake
- the preparing waiter sees no new records and begins to wait

This is exactly the problem that the function description of
waitqueue_active() warns about.

Use wq_has_sleeper() instead of waitqueue_active() because it
includes the necessary full memory barrier.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-4-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: use atomic updates for klogd work

[ Upstream commit 2ba3673d70178bf07fb75ff25c54bc478add4021 ]

The per-cpu @printk_pending variable can be updated from
sleepable contexts, such as:

  get_random_bytes()
    warn_unseeded_randomness()
      printk_deferred()
        defer_console_output()

and can be updated from interrupt contexts, such as:

  handle_irq_event_percpu()
    __irq_wake_thread()
      wake_up_process()
        try_to_wake_up()
          select_task_rq()
            select_fallback_rq()
              printk_deferred()
                defer_console_output()

and can be updated from NMI contexts, such as:

  vprintk()
    if (in_nmi()) defer_console_output()

Therefore the atomic variant of the updating functions must be used.

Replace __this_cpu_xchg() with this_cpu_xchg().
Replace __this_cpu_or() with this_cpu_or().

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87iltld4ue.fsf@jogness.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Fix possible race in cpufreq online error path

[ Upstream commit f346e96267cd76175d6c201b40f770c0116a8a04 ]

When cpufreq online fails, the policy->cpus mask is not cleared and
policy->rwsem is released too early, so the driver can be invoked
via the cpuinfo_cur_freq sysfs attribute while its ->offline() or
->exit() callbacks are being run.

Take policy->clk as an example:

static int cpufreq_online(unsigned int cpu)
{
  ...
  // policy->cpus != 0 at this time
  down_write(&policy->rwsem);
  ret = cpufreq_add_dev_interface(policy);
  up_write(&policy->rwsem);

  return 0;

out_destroy_policy:
for_each_cpu(j, policy->real_cpus)
remove_cpu_dev_symlink(policy, get_cpu_device(j));
    up_write(&policy->rwsem);
...
out_exit_policy:
  if (cpufreq_driver->exit)
    cpufreq_driver->exit(policy);
      clk_put(policy->clk);
      // policy->clk is a wild pointer
...
                                    ^
                                    |
                            Another process access
                            __cpufreq_get
                              cpufreq_verify_current_freq
                                cpufreq_generic_get
                                  // acces wild pointer of policy->clk;
                                    |
                                    |
out_offline_policy:                 |
  cpufreq_policy_free(policy);      |
    // deleted here, and will wait for no body reference
    cpufreq_policy_put_kobj(policy);
}

Address this by modifying cpufreq_online() to release policy->rwsem
in the error path after the driver callbacks have run and to clear
policy->cpus before releasing the semaphore.

Fixes: 7106e02baed4 ("cpufreq: release policy->rwsem on error")
Signed-off-by: Schspa Shi <schspa@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: img-spfi: Fix pm_runtime_get_sync() error checking

[ Upstream commit cc470d55343056d6b2a5c32e10e0aad06f324078 ]

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Fixes: deba25800a12b ("spi: Add driver for IMG SPFI controller")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220422062641.10486-1-zhengyongjun3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: report zeroes for CPU full at the system level

[ Upstream commit 890d550d7dbac7a31ecaa78732aa22be282bb6b8 ]

Martin find it confusing when look at the /proc/pressure/cpu output,
and found no hint about that CPU "full" line in psi Documentation.

% cat /proc/pressure/cpu
some avg10=0.92 avg60=0.91 avg300=0.73 total=933490489
full avg10=0.22 avg60=0.23 avg300=0.16 total=358783277

The PSI_CPU_FULL state is introduced by commit e7fcd7622823
("psi: Add PSI_CPU_FULL state"), which mainly for cgroup level,
but also counted at the system level as a side effect.

Naturally, the FULL state doesn't exist for the CPU resource at
the system level. These "full" numbers can come from CPU idle
schedule latency. For example, t1 is the time when task wakeup
on an idle CPU, t2 is the time when CPU pick and switch to it.
The delta of (t2 - t1) will be in CPU_FULL state.

Another case all processes can be stalled is when all cgroups
have been throttled at the same time, which unlikely to happen.

Anyway, CPU_FULL metric is meaningless and confusing at the
system level. So this patch will report zeroes for CPU full
at the system level, and update psi Documentation accordingly.

Fixes: e7fcd7622823 ("psi: Add PSI_CPU_FULL state")
Reported-by: Martin Steigerwald <Martin.Steigerwald@proact.de>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220408121914.82855-1-zhouchengming@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq

[ Upstream commit 64eaf50731ac0a8c76ce2fedd50ef6652aabc5ff ]

Since commit 23127296889f ("sched/fair: Update scale invariance of PELT")
change to use rq_clock_pelt() instead of rq_clock_task(), we should also
use rq_clock_pelt() for throttled_clock_task_time and throttled_clock_task
accounting to get correct cfs_rq_clock_pelt() of throttled cfs_rq. And
rename throttled_clock_task(_time) to be clock_pelt rather than clock_task.

Fixes: 23127296889f ("sched/fair: Update scale invariance of PELT")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220408115309.81603-1-zhouchengming@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

signal: Deliver SIGTRAP on perf event asynchronously if blocked

[ Upstream commit 78ed93d72ded679e3caf0758357209887bda885f ]

With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:

    <set up SIGTRAP on a perf event>
    ...
    sigset_t s;
    sigemptyset(&s);
    sigaddset(&s, SIGTRAP | <and others>);
    sigprocmask(SIG_BLOCK, &s, ...);
    ...
    <perf event triggers>

When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.

This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.

To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).

The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).

The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]

Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dpi: Use mt8183 output formats for mt8192

[ Upstream commit 7112e0b0a58be8575547eba6596c42710922674f ]

The configuration for mt8192 was incorrectly using the output formats
from mt8173. Since the output formats for mt8192 are instead the same
ones as for mt8183, which require two bus samples per pixel, the
pixelclock and DDR edge setting were misconfigured. This made external
displays unable to show the image.

Fix the issue by correcting the output format for mt8192 to be the same
as for mt8183, fixing the usage of external displays for mt8192.

Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220408013950.674477-1-nfraprado@collabora.com/
Fixes: be63f6e8601f ("drm/mediatek: dpi: Add output bus formats to driver data")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: da9121: Fix uninit-value in da9121_assign_chip_model()

[ Upstream commit bab76514aca36bc513224525d5598da676938218 ]

KASAN report slab-out-of-bounds in __regmap_init as follows:

BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr ffff88803678cdf1 by task xrun/9137

CPU: 0 PID: 9137 Comm: xrun Tainted: G        W         5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
 print_report.cold+0xcd/0x69b mm/kasan/report.c:313
 kasan_report+0x8e/0xc0 mm/kasan/report.c:491
 __regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841
 __devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266
 __devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394
 da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039
 i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563

This happend when da9121 device is probe by da9121_i2c_id, but with
invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later
da9121_assign_chip_model() will access 'regmap' without init it.

Fix it by return -EINVAL from da9121_assign_chip_model() if
'chip->subvariant_id' is invalid.

Fixes: f3fbd5566f6a ("regulator: da9121: Add device variants")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Adam Ward <Adam.Ward.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220421090335.1876149-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: Fix error handling in analogix_dp_probe

[ Upstream commit 9f15930bb2ef9f031d62ffc49629cbae89137733 ]

In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call, as already done in the remove function.

Fixes: 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420011644.25730-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: elan: Fix potential double free in elan_input_configured

[ Upstream commit 1af20714fedad238362571620be0bd690ded05b6 ]

'input' is a managed resource allocated with devm_input_allocate_device(),
so there is no need to call input_free_device() explicitly or
there will be a double free.

According to the doc of devm_input_allocate_device():
 * Managed input devices do not need to be explicitly unregistered or
 * freed as it will be done automatically when owner device unbinds from
 * its driver (or binding fails).

Fixes: b7429ea53d6c ("HID: elan: Fix memleak in elan_input_configured")
Fixes: 9a6a4193d65b ("HID: Add driver for USB ELAN Touchpad")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-led: fix maximum brightness for Dream Cheeky

[ Upstream commit 116c3f4a78ebe478d5ad5a038baf931e93e7d748 ]

Increase maximum brightness for Dream Cheeky to 63. Emperically
determined based on testing in kernel 4.4 on this device:

Bus 003 Device 002: ID 1d34:0004 Dream Cheeky Webmail Notifier

Fixes: 6c7ad07e9e05 ("HID: migrate USB LED driver from usb misc to hid")
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: denali: Use managed device resources

[ Upstream commit 3a745b51cddafade99aaea1b93aad31e9614e230 ]

All of the resources used by this driver has managed interfaces, so use
them. Otherwise we will get the following splat:

[    4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000
[    4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5
[    4.473538] nand: No NAND device found
[    4.474068] BUG: unable to handle page fault for address: ffffc90005000410
[    4.475169] #PF: supervisor write access in kernel mode
[    4.475579] #PF: error_code(0x0002) - not-present page
[    4.478362] RIP: 0010:iowrite32+0x9/0x50
[    4.486068] Call Trace:
[    4.486269]  <IRQ>
[    4.486443]  denali_isr+0x15b/0x300 [denali]
[    4.486788]  ? denali_direct_write+0x50/0x50 [denali]
[    4.487189]  __handle_irq_event_percpu+0x161/0x3b0
[    4.487571]  handle_irq_event+0x7d/0x1b0
[    4.487884]  handle_fasteoi_irq+0x2b0/0x770
[    4.488219]  __common_interrupt+0xc8/0x1b0
[    4.488549]  common_interrupt+0x9a/0xc0

Fixes: 93db446a424c ("mtd: nand: move raw NAND related code to the raw/ subdir")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220411125808.958276-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/dmc520: Don't print an error for each unconfigured interrupt line

[ Upstream commit ad2df24732e8956a45a00894d2163c4ee8fb0e1f ]

The dmc520 driver requires that at least one interrupt line, out of the
ten possible, is configured. The driver prints an error and returns
-EINVAL from its .probe function if there are no interrupt lines
configured.

Don't print a KERN_ERR level message for each interrupt line that's
unconfigured as that can confuse users into thinking that there is an
error condition.

Before this change, the following KERN_ERR level messages would be
reported if only dram_ecc_errc and dram_ecc_errd were configured in the
device tree:

  dmc520 68000000.dmc: IRQ ram_ecc_errc not found
  dmc520 68000000.dmc: IRQ ram_ecc_errd not found
  dmc520 68000000.dmc: IRQ failed_access not found
  dmc520 68000000.dmc: IRQ failed_prog not found
  dmc520 68000000.dmc: IRQ link_err not
  dmc520 68000000.dmc: IRQ temperature_event not found
  dmc520 68000000.dmc: IRQ arch_fsm not found
  dmc520 68000000.dmc: IRQ phy_request not found

Fixes: 1088750d7839 ("EDAC: Add EDAC driver for DMC520")
Reported-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220111163800.22362-1-tyhicks@linux.microsoft.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: fix duplicate array initializer

[ Upstream commit 33cb0917bbe241dd17a2b87ead63514c1b7e5615 ]

There are two initializers for P_RETRY_WRITE:

drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]

Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.

Fixes: 036b17eaab93 ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2c2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

target: remove an incorrect unmap zeroes data deduction

[ Upstream commit 179d8609d8424529e95021df939ed7b0b82b37f1 ]

For block devices, the SCSI target drivers implements UNMAP as calls to
blkdev_issue_discard, which does not guarantee zeroing just because
Write Zeroes is supported.

Note that this does not affect the file backed path which uses
fallocate to punch holes.

Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

device property: Allow error pointer to be passed to fwnode APIs

[ Upstream commit 002752af7b89b74c64fe6bec8c5fde3d3a7810d8 ]

Some of the fwnode APIs might return an error pointer instead of NULL
or valid fwnode handle. The result of such API call may be considered
optional and hence the test for it is usually done in a form of

fwnode = fwnode_find_reference(...);
if (IS_ERR(fwnode))
...error handling...

Nevertheless the resulting fwnode may have bumped the reference count
and hence caller of the above API is obliged to call fwnode_handle_put().
Since fwnode may be not valid either as NULL or error pointer the check
has to be performed there. This approach uglifies the code and adds
a point of making a mistake, i.e. forgetting about error point case.

To prevent this, allow an error pointer to be passed to the fwnode APIs.

Fixes: 83b34afb6b79 ("device property: Introduce fwnode_find_reference()")
Reported-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

device property: Check fwnode->secondary when finding properties

[ Upstream commit c097af1d0a8483b44fa30e86b311991d76b6ae67 ]

fwnode_property_get_reference_args() searches for named properties
against a fwnode_handle, but these could instead be against the fwnode's
secondary. If the property isn't found against the primary, check the
secondary to see if it's there instead.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20211128232455.39332-1-djrscally@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: Add missing prototype for efi_capsule_setup_info

[ Upstream commit aa480379d8bdb33920d68acfd90f823c8af32578 ]

Fixes "no previous declaration for 'efi_capsule_setup_info'" warnings
under W=1.

Fixes: 2959c95d510c ("efi/capsule: Add support for Quark security header")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/c28d3f86-dd72-27d1-e2c2-40971b8da6bd@siemens.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: NULL out the dev->rfkill to prevent UAF

[ Upstream commit 1b0e81416a24d6e9b8c2341e22e8bf48f8b8bfc9 ]

Commit 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device")
assumes the device_is_registered() in function nfc_dev_up() will help
to check when the rfkill is unregistered. However, this check only
take effect when device_del(&dev->dev) is done in nfc_unregister_device().
Hence, the rfkill object is still possible be dereferenced.

The crash trace in latest kernel (5.18-rc2):

[   68.760105] ==================================================================
[   68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750
[   68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313
[   68.760756]
[   68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4
[   68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[   68.760756] Call Trace:
[   68.760756]  <TASK>
[   68.760756]  dump_stack_lvl+0x57/0x7d
[   68.760756]  print_report.cold+0x5e/0x5db
[   68.760756]  ? __lock_acquire+0x3ec1/0x6750
[   68.760756]  kasan_report+0xbe/0x1c0
[   68.760756]  ? __lock_acquire+0x3ec1/0x6750
[   68.760756]  __lock_acquire+0x3ec1/0x6750
[   68.760756]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   68.760756]  ? register_lock_class+0x18d0/0x18d0
[   68.760756]  lock_acquire+0x1ac/0x4f0
[   68.760756]  ? rfkill_blocked+0xe/0x60
[   68.760756]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   68.760756]  ? mutex_lock_io_nested+0x12c0/0x12c0
[   68.760756]  ? nla_get_range_signed+0x540/0x540
[   68.760756]  ? _raw_spin_lock_irqsave+0x4e/0x50
[   68.760756]  _raw_spin_lock_irqsave+0x39/0x50
[   68.760756]  ? rfkill_blocked+0xe/0x60
[   68.760756]  rfkill_blocked+0xe/0x60
[   68.760756]  nfc_dev_up+0x84/0x260
[   68.760756]  nfc_genl_dev_up+0x90/0xe0
[   68.760756]  genl_family_rcv_msg_doit+0x1f4/0x2f0
[   68.760756]  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230
[   68.760756]  ? security_capable+0x51/0x90
[   68.760756]  genl_rcv_msg+0x280/0x500
[   68.760756]  ? genl_get_cmd+0x3c0/0x3c0
[   68.760756]  ? lock_acquire+0x1ac/0x4f0
[   68.760756]  ? nfc_genl_dev_down+0xe0/0xe0
[   68.760756]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   68.760756]  netlink_rcv_skb+0x11b/0x340
[   68.760756]  ? genl_get_cmd+0x3c0/0x3c0
[   68.760756]  ? netlink_ack+0x9c0/0x9c0
[   68.760756]  ? netlink_deliver_tap+0x136/0xb00
[   68.760756]  genl_rcv+0x1f/0x30
[   68.760756]  netlink_unicast+0x430/0x710
[   68.760756]  ? memset+0x20/0x40
[   68.760756]  ? netlink_attachskb+0x740/0x740
[   68.760756]  ? __build_skb_around+0x1f4/0x2a0
[   68.760756]  netlink_sendmsg+0x75d/0xc00
[   68.760756]  ? netlink_unicast+0x710/0x710
[   68.760756]  ? netlink_unicast+0x710/0x710
[   68.760756]  sock_sendmsg+0xdf/0x110
[   68.760756]  __sys_sendto+0x19e/0x270
[   68.760756]  ? __ia32_sys_getpeername+0xa0/0xa0
[   68.760756]  ? fd_install+0x178/0x4c0
[   68.760756]  ? fd_install+0x195/0x4c0
[   68.760756]  ? kernel_fpu_begin_mask+0x1c0/0x1c0
[   68.760756]  __x64_sys_sendto+0xd8/0x1b0
[   68.760756]  ? lockdep_hardirqs_on+0xbf/0x130
[   68.760756]  ? syscall_enter_from_user_mode+0x1d/0x50
[   68.760756]  do_syscall_64+0x3b/0x90
[   68.760756]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   68.760756] RIP: 0033:0x7f67fb50e6b3
...
[   68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[   68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3
[   68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003
[   68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c
[   68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e
[   68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003

[   68.760756]  </TASK>
[   68.760756]
[   68.760756] Allocated by task 279:
[   68.760756]  kasan_save_stack+0x1e/0x40
[   68.760756]  __kasan_kmalloc+0x81/0xa0
[   68.760756]  rfkill_alloc+0x7f/0x280
[   68.760756]  nfc_register_device+0xa3/0x1a0
[   68.760756]  nci_register_device+0x77a/0xad0
[   68.760756]  nfcmrvl_nci_register_dev+0x20b/0x2c0
[   68.760756]  nfcmrvl_nci_uart_open+0xf2/0x1dd
[   68.760756]  nci_uart_tty_ioctl+0x2c3/0x4a0
[   68.760756]  tty_ioctl+0x764/0x1310
[   68.760756]  __x64_sys_ioctl+0x122/0x190
[   68.760756]  do_syscall_64+0x3b/0x90
[   68.760756]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   68.760756]
[   68.760756] Freed by task 314:
[   68.760756]  kasan_save_stack+0x1e/0x40
[   68.760756]  kasan_set_track+0x21/0x30
[   68.760756]  kasan_set_free_info+0x20/0x30
[   68.760756]  __kasan_slab_free+0x108/0x170
[   68.760756]  kfree+0xb0/0x330
[   68.760756]  device_release+0x96/0x200
[   68.760756]  kobject_put+0xf9/0x1d0
[   68.760756]  nfc_unregister_device+0x77/0x190
[   68.760756]  nfcmrvl_nci_unregister_dev+0x88/0xd0
[   68.760756]  nci_uart_tty_close+0xdf/0x180
[   68.760756]  tty_ldisc_kill+0x73/0x110
[   68.760756]  tty_ldisc_hangup+0x281/0x5b0
[   68.760756]  __tty_hangup.part.0+0x431/0x890
[   68.760756]  tty_release+0x3a8/0xc80
[   68.760756]  __fput+0x1f0/0x8c0
[   68.760756]  task_work_run+0xc9/0x170
[   68.760756]  exit_to_user_mode_prepare+0x194/0x1a0
[   68.760756]  syscall_exit_to_user_mode+0x19/0x50
[   68.760756]  do_syscall_64+0x48/0x90
[   68.760756]  entry_SYSCALL_64_after_hwframe+0x44/0xae

This patch just add the null out of dev->rfkill to make sure such
dereference cannot happen. This is safe since the device_lock() already
protect the check/write from data race.

Fixes: 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixp4xx_eth: fix error check return value of platform_get_irq()

[ Upstream commit f45ba67eb74ab4b775616af731bdf8944afce3f1 ]

platform_get_irq() return negative value on failure, so null check of
return value is incorrect. Fix it by comparing whether it is less than
zero.

Fixes: 9055a2f59162 ("ixp4xx_eth: make ptp support a platform driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220412085126.2532924-1-lv.ruyi@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: 1G can also support 1000BASE-X link mode

[ Upstream commit 66f862563ed68717dfd84e808ca12705ed275ced ]

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scftorture: Fix distribution of short handler delays

[ Upstream commit 8106bddbab5f0ba180e6d693c7c1fc6926d57caa ]

The scftorture test module's scf_handler() function is supposed to provide
three different distributions of short delays (including "no delay") and
one distribution of long delays, if specified by the scftorture.longwait
module parameter.  However, the second of the two non-zero-wait short delays
is disabled due to the first such delay's "goto out" not being enclosed in
the "then" clause with the "udelay()".

This commit therefore adjusts the code to provide the intended set of
delays.

Fixes: e9d338a0b179 ("scftorture: Add smp_call_function() torture test")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout

[ Upstream commit 8b1ea69a63eb62f97cef63e6d816b64ed84e8760 ]

wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 5720ec0a6d26 ("spi: spi-ti-qspi: Add DMA support for QSPI mmap read")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220411111034.24447-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: mali-dp: potential dereference of null pointer

[ Upstream commit 73c3ed7495c67b8fbdc31cf58e6ca8757df31a33 ]

The return value of kzalloc() needs to be checked.
To avoid use of null pointer '&state->base' in case of the
failure of alloc.

Fixes: 99665d072183 ("drm: mali-dp: add malidp_crtc_state struct")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214100837.46912-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/komeda: Fix an undefined behavior bug in komeda_plane_add()

[ Upstream commit f5e284bb74ab296f98122673c7ecd22028b2c200 ]

In komeda_plane_add(), komeda_get_layer_fourcc_list() is assigned to
formats and used in drm_universal_plane_init().
drm_universal_plane_init() passes formats to
__drm_universal_plane_init(). __drm_universal_plane_init() further
passes formats to memcpy() as src parameter, which could lead to an
undefined behavior bug on failure of komeda_get_layer_fourcc_list().

Fix this bug by adding a check of formats.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DRM_KOMEDA=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 61f1c4a8ab75 ("drm/komeda: Attach komeda_dev to DRM-KMS")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211201033704.32054-1-zhou1615@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: show SSID for P2P_GO interfaces

[ Upstream commit a75971bc2b8453630e9f85e0beaa4da8db8277a3 ]

There's no real reason not to send the SSID to userspace
when it requests information about P2P_GO, it is, in that
respect, exactly the same as AP interfaces. Fix that.

Fixes: 44905265bc15 ("nl80211: don't expose wdev->ssid for most interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220318134656.14354ae223f0.Ia25e85a512281b92e1645d4160766a4b1a471597@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: reset the packet scheduler on PRIO change

[ Upstream commit 0e203c324752e13d22624ab7ffafe934fa06ab50 ]

Similar to the previous patch, for priority changes
requested by the local PM.

Reported-and-suggested-by: Davide Caratti <dcaratti@redhat.com>
Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation

[ Upstream commit 4969e223b109754c2340a26bba9b1cf44f0cba9b ]

Fix an issue with commit 1ce849c75534 ("x86/PCI: Add support for the ALi
M1487 (IBC) PIRQ router") and correct ALi M1487 (IBC) PIRQ router link
value (`pirq' cookie) interpretation according to findings in the BIOS.

Credit to Nikolai Zhubr for the detective work as to the bit layout.

Fixes: 1ce849c75534 ("x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310013270.44113@angie.orcam.me.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Don't error out on CO-RE relos for overriden weak subprogs

[ Upstream commit e89d57d938c8fa80c457982154ed6110804814fe ]

During BPF static linking, all the ELF relocations and .BTF.ext
information (including CO-RE relocations) are preserved for __weak
subprograms that were logically overriden by either previous weak
subprogram instance or by corresponding "strong" (non-weak) subprogram.
This is just how native user-space linkers work, nothing new.

But libbpf is over-zealous when processing CO-RE relocation to error out
when CO-RE relocation belonging to such eliminated weak subprogram is
encountered. Instead of erroring out on this expected situation, log
debug-level message and skip the relocation.

Fixes: db2b8b06423c ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: txp: Force alpha to be 0xff if it's disabled

[ Upstream commit 5453343a88ede8b12812fced81ecd24cb888ccc3 ]

If we use a format that has padding instead of the alpha component (such
as XRGB8888), it appears that the Transposer will fill the padding to 0,
disregarding what was stored in the input buffer padding.

This leads to issues with IGT, since it will set the padding to 0xff,
but will then compare the CRC of the two frames which will thus fail.
Another nice side effect is that it is now possible to just use the
buffer as ARGB.

Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-4-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: txp: Don't set TXP_VSTART_AT_EOF

[ Upstream commit 234998df929f14d00cbf2f1e81a7facb69fd9266 ]

The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS.
However, the HVS waits for VSTART to enable the FIFO and will thus start
filling the FIFO before the start of the frame.

This leads to corruption at the beginning of the first frame, and
content from the previous frame at the beginning of the next frames.

Since one VSTART is enough, let's get rid of it.

Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Reset muxes at probe time

[ Upstream commit 8514e6b1f40319e31ac4aa3fbf606796786366c9 ]

By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.

This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.

In order to avoid this, let's reset all the output muxes to their reset
value.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Fix mtk_cec_mask()

[ Upstream commit 2c5d69b0a141e1e98febe3111e6f4fd8420493a5 ]

In current implementation, mtk_cec_mask() writes val into target register
and ignores the mask. After talking to our hdmi experts, mtk_cec_mask()
should read a register, clean only mask bits, and update (val | mask) bits
to the register.

Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220315232301.2434-1-miles.chen@mediatek.com/
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Zhiqiang Lin <zhiqiang.lin@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Fix frame count register readout

[ Upstream commit b51cd7ad143d2eb31a6df81c2183128920e47c2b ]

In order to get the field currently being output, the driver has been
using the display FIFO frame count in the HVS, reading a 6-bit field at
the offset 12 in the DISPSTATx register.

While that field is indeed at that location for the FIFO 1 and 2, the
one for the FIFO0 is actually in the DISPSTAT1 register, at the offset
18.

Fixes: e538092cb15c ("drm/vc4: Enable precise vblank timestamping for interlaced modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/delay: Fix the wrong asm constraint in delay_loop()

[ Upstream commit b86eb74098a92afd789da02699b4b0dd3f73b889 ]

The asm constraint does not reflect the fact that the asm statement can
modify the value of the local variable loops. Which it does.

Specifying the wrong constraint may lead to undefined behavior, it may
clobber random stuff (e.g. local variable, important temporary value in
regs, etc.). This is especially dangerous when the compiler decides to
inline the function and since it doesn't know that the value gets
modified, it might decide to use it from a register directly without
reloading it.

Change the constraint to "+a" to denote that the first argument is an
input and an output argument.

  [ bp: Fix typo, massage commit message. ]

Fixes: e01b70ef3eb3 ("x86: fix bug in arch/i386/lib/delay.c file, delay_loop function")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220329104705.65256-2-ammarfaizi2@gnuweeb.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe

[ Upstream commit 05654431a18fe24e5e46a375d98904134628a102 ]

This node pointer is returned by of_parse_phandle() with
refcount incremented in this function.
Calling of_node_put() to avoid the refcount leak.

Fixes: 8625c1dbd876 ("ASoC: mediatek: Add mt2701-wm8960 machine driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404093526.30004-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe

[ Upstream commit 4f4e0454e226de3bf4efd7e7924d1edc571c52d5 ]

Call of_node_put(platform_node) to avoid refcount leak in
the error path.

Fixes: 94319ba10eca ("ASoC: mediatek: Use platform_of_node for machine drivers")
Fixes: 493433785df0 ("ASoC: mediatek: mt8173: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220404092903.26725-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: qcom-qspi: Add minItems to interconnect-names

[ Upstream commit e23d86c49a9c78e8dbe3abff20b30812b26ab427 ]

Add minItems constraint to interconnect-names as well. The schema
currently tries to match 2 names and fail for DTs with single entry.

With the change applied, below interconnect-names values are possible:
['qspi-config'], ['qspi-config', 'qspi-memory']

Fixes: 8f9c291558ea ("dt-bindings: spi: Add interconnect binding for QSPI")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220328192006.18523-1-singh.kuldeep87k@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG

[ Upstream commit a4f9dd55c5e1bb951db6f1dee20e62e0103f3438 ]

Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according
to page 23 of the datasheet[0].

[0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/

Fixes: 469b99248985 ("mtd: spinand: gigadevice: Support GD5F1GQ5UExxG")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-2-gch981213@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling

[ Upstream commit c0ff7a649d62105a9308cc3ac36e52a4669d9cb4 ]

The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.

The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.

Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes: ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-3-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: bridge: icn6211: Fix register layout

[ Upstream commit 2dcec57b3734029cc1adc5cb872f61e21609eed4 ]

The chip register layout has nothing to do with MIPI DCS, the registers
incorrectly marked as MIPI DCS in the driver are regular chip registers
often with completely different function.

Fill in the actual register names and bits from [1] and [2] and add the
entire register layout, since the documentation for this chip is hard to
come by.

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator

Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes: ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-2-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: adv7511: clean up CEC adapter when probe fails

[ Upstream commit 7ed2b0dabf7a22874cb30f8878df239ef638eb53 ]

When the probe routine fails we also need to clean up the
CEC adapter registered in adv7511_cec_init().

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321104705.2804423-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: fix invalid EDID extension block filtering

[ Upstream commit 3aefc722ff52076407203b6af9713de567993adf ]

The invalid EDID block filtering uses the number of valid EDID
extensions instead of all EDID extensions for looping the extensions in
the copy. This is fine, by coincidence, if all the invalid blocks are at
the end of the EDID. However, it's completely broken if there are
invalid extensions in the middle; the invalid blocks are included and
valid blocks are excluded.

Fix it by modifying the base block after, not before, the copy.

Fixes: 14544d0937bf ("drm/edid: Only print the bad edid when aborting")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330170426.349248-1-jani.nikula@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix ar9003_get_eepmisc

[ Upstream commit 9aaff3864b603408c02c629957ae8d8ff5d5a4f2 ]

The current implementation is reading the wrong eeprom type.

Fixes: d8ec2e2a63e8 ("ath9k: Add an eeprom_ops callback for retrieving the eepmisc value")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220320233010.123106-5-wlooi@ucalgary.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>