powerpc: Add PCI support for 8540 ADS to powerpc tree

Add PCI support for setting PCI from flat device tree on 85xx specifically for
MPC8540 ADS.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[PATCH] powerpc: Add missing vmlinux.bin target

With this patch 'make vmlinux.bin' works.  This is needed by
some embedded platforms.  Kumar already added the routines
to actually build the image in arch/powerpc/boot/Makefile.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: trivial: modify comments to refer to new location of files

This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree.  I think this accomplises
everything wanted, though there might be a few references I missed.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc32: Make platform devices being able to assign functions

Implemented by  modification of the .name field of the platform device,
when PDs with the
same names are to be used within different drivers, as
<device_name> -> <device_name>:<function>
Corresponding drivers should change the .name in struct device_driver to
reflect upper of course.

Added ppc_sys_device_disable/enable function set, making it easier to
disable all the inexistent/not utilized platform device way pdevs. By the
check of the "disabled" bit in the config field of ppc_sys_specs, disabled
platform devices will be either added/removed from the bus, or simply not
registered on it, depending on the time when disable/enable call asserted.

The default behaviour when nothing is disabled/enabled will be "all devices
are enabled", which is the same as before.

Also helper platform_notify_map function added, making assignment of
board-specific platform_info more consistent and generic.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Move pSeries firmware feature setup into platforms/pseries

Currently we have some stuff in firmware.h and kernel/firmware.c that is
#ifdef CONFIG_PPC_PSERIES. Move it all into platforms/pseries.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Clean up pSeries firmware feature initialisation

Clean up fw_feature_init in platforms/pseries/setup.c. Clean up white space
and replace the while loop with a for loop - which seems clearer to me.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc/ppc: Add missing isyncs in head_fsl_booke.S

The e500 core reference manual indicates that isync is required
after mtmsr(DE bit) and mtspr DBCR0.  Add isyncs to make the code
conform to the spec.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: lindent 85xx platform code

Ran arch/powerpc/platforms/85xx through Lindent

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: rename mpc85xx.c to misc.c

Rename mpc85xx.c to misc.c to match the pattern established by the
8349 port - consistency is a good thing.  Also run Lindent on the
file to clean it up.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: mpc85xx_ads.c include file cleanup

Cut-and-paste from the old platform code in arch/ppc resulted in
arch/powerpc/platforms/85xx/mpc85xx_ads.c having way too many
header files included.  Clean this up.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Fix Kernel FP unavail exception for BookE

Updated FP unavailable exception to refer to the correct
function in traps.c. head_booke.h was using the old name, KernelFP,
instead of kernel_fp_unavailable_exception.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge ../powerpc-merge

[PATCH] powerpc: Add FSL USB node to documentation

Updated the documentation to include the definition of the USB device
node format for Freescale SOC devices.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: unshare system call registration

Registers system call for the powerpc architecture.

Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

ppc: Use the system call table from arch/powerpc/kernel/systbl.S

With this, new system calls only have to be wired up in one place
for ARCH=ppc and ARCH=powerpc, rather than 2.

Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/libata-dev

[PATCH] do_sigaction: cleanup ->sa_mask manipulation

Clear unblockable signals beforehand.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sys_signal: initialize ->sa_mask

Pointed out by Linus Torvalds.

sys_signal() forgets to initialize ->sa_mask.

( I suspect arch/ia64/ia32/ia32_signal.c:sys32_signal()
  also needs this fix )

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[SPARC64]: Fix sys_newfstatat syscall table entry for 64-bit.

The sparc64 64 bit syscall table seems to be broken as it has
compat_sys_newfstatat in its syscall table instead of sys_newfstatat.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull new-syscalls into release branch

[IA64] mca_drv: Add minstate validation

MCA driver can cause panic if kernel gets a state info with no minstate.
This patch adds minstate validation before handling it.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] sys32_signal() forgets to initialize ->sa_mask

Pointed out by Oleg Nesterov <oleg@tv-sign.ru>, who in turn
got the hint from Linus.

Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64-SGI] Small cleanup for misuse of list_for_each to list_for_each_safe.

Patch was suggested by Kenneth W. Chen here

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64-SGI] Hotplug driver related fix in the SN ia64 code.

Remove an erroneous kfree, and unlink the pcidev_info struct from the
pcidev_info list prior to free'ing the pcidev_info struct.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Revert "[PATCH] kconfig: detect if -lintl is needed when linking conf,mconf"

This reverts commit 5e375bc7d586e0df971734a5a5f1f080ffd89b68.

Kyle McMartin steps on his soap-box:

  "Sigh.  Can everyone please stop assuming gcc can output to /dev/null?
   On several platforms, ld tries to lseek in the output file, and fails
   if it can't."

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'upstream-fixes'

Merge branch 'master'

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

[IPV6]: Address autoconfiguration does not work after device down/up cycle

If you set network interface down and up again, the IPv6 address
autoconfiguration does not work. 'ip addr' shows that the link-local
address is in tentative state. We don't even react to periodical router
advertisements.

During NETDEV_DOWN we clear IF_READY, and we don't set it back in
NETDEV_UP. While starting to perform DAD on the link-local address, we
notice that the device is not in IF_READY, and we abort autoconfiguration
process (which would eventually send router solicitations).

Acked-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] x86-64: Add sys_unshare

Add unshare syscall for x86-64

ppoll/pselect are not ready yet, but add reservations.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[IA64] unshare system call registration for ia64

Registers system call for the ia64 architecture.

Reserves space for ppoll and pselect, and adds unshare at system
call number 1296.

Signed-off-by: Janak Desai <janak@us.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge master.kernel.org:/home/rmk/linux-2.6-mmc

Merge master.kernel.org:/home/rmk/linux-2.6-serial

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Manual conflict merge of arch/arm/Kconfig

[MMC] Remove extra character in AU1XXX MMC Kconfig entry

An obvious vi fat finger on my part.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3278/1: OMAP: 3/3 Fix low-level io init for omap2 boards

Patch from Tony Lindgren

This patch fixes the low-level IO init for omap2 boards.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3280/1: OMAP: 2/3 Fix low-level io init for omap1 boards

Patch from Tony Lindgren

This patch fixes the low-level IO init for omap1 boards.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3279/1: OMAP: 1/3 Fix low-level io init

Patch from Tony Lindgren

This patch adds the missing cache flushes to common low-level
init that are needed to access the IO region. These flushes
are normally done at the end of devicemaps_init(), but we
need to detect the OMAP core type early.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3299/1: S3C24XX - fix irq range on adc device

Patch from Ben Dooks

Change the IRQ resource range for the ADC device
to be two distinct IRQs

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] 8250_pci: add new PCI serial card support

This patch adds new PCI serial card support.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] ip22zilog: Whitespace cleanup.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] PPC32 CPM_UART: update to utilize the new TTY flip API

This replaces old direct usage of tty->flip stuff with relative flip API
calls.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] Fix compile error in 8250_au1x00.c

The DB1550 actually doesn't have a UART2.  Remove it from the list.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] 8250 serial console update uart_8250_port ier

On some embedded PowerPC (MPC834x) systems an extra byte would some
times be required to flush data out of the fifo.
serial8250_console_write() was updating the IER in hardware without
also updating the copy in uart_8250_port. This causes issues functions
like serial8250_start_tx() and __stop_tx() to misbehave.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3283/1: S3C2400 - defines the number of serial ports

Patch from Lucas Correia Villa Real

This patch defines the number of serial ports on the S3C2400.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3313/1: Use OSC4 instead of OSC1 for CLCD

Patch from Catalin Marinas

Because of a type, OSC1 was used for setting the display clock instead of
OSC4. This patch fixes it.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3311/1: clean up include/asm-arm/mutex.h

Patch from Nicolas Pitre

Since:

if (unlikely(__res || __ex_flag))

produces worse code on ARM than:

if (unlikely(__res | __ex_flag))

I therefore made it more explicit:

__res |= __ex_flag;
if (unlikely(__res != 0))

so it is not seen as a typo again.

Also made everything static inline rather than macros for better readability
(both produce the same code after all).

And finally added missing \t from multi-line assembly code.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3310/1: add a comment about the possible __kuser_cmpxchg transient false
 negative

Patch from Nicolas Pitre

The pre ARMv5 implementation can be aborted if an exception occurs in
the middle of it.  Because of that, the ARMv6 implementation doesn't
re-attempt the operation on a failed strex either.  Let's make this
transient nature of such a false positive more explicit in the
definition.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3309/1: disable the pre-ARMv5 NPTL kernel helper in the non MMU case

Patch from Nicolas Pitre

The cmpxchg emulation on pre-ARMv5 relies on user code executed from a
kernel address.  If the operation cannot complete atomically, it is
aborted from the usr_entry macro by clearing the Z flag.  This clearing
of the Z flag is done whenever the user pc is above TASK_SIZE.

However this "pc >= TASK_SIZE" test cannot work in the non MMU case.
Worse: the current code will corrupt the Z flag on every entry to the
kernel.

Let's disable it in the non MMU case for now.  Using NPTL on non MMU
targets needs to be worked out anyway.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3308/1: old ABI compat: struct sockaddr_un

Patch from Nicolas Pitre

struct sockaddr_un loses its padding with EABI.  Since the size of the
structure is used as a validation test in unix_mkname(), we need to
change the length argument to 110 whenever it is 112.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Experimental config options should have (EXPERIMENTAL)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3307/1: old ABI compat: mark it experimental

Patch from Nicolas Pitre

Although OABI_COMPAT works fine in most cases, it is still experimental
and could be for ever since it is nearly impossible to handle
everything, e.g. ioctls.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3306/1: S3C24XX - update defconfig

Patch from Ben Dooks

Bring s3c2410 defconfig up to date

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3305/1: Minor typographical and spelling fixes in Konfig

Patch from Martin Michlmayr

Minor typographical and spelling fixes in Konfig

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
---

 Kconfig |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3304/1: Add help descriptions to ARCH config items that don't have one

Patch from Martin Michlmayr

Add help descriptions to ARCH config items that don't have one.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
---

 Kconfig               |   32 ++++++++++++++++++++++++++++++--
 mach-clps711x/Kconfig |    2 ++
 2 files changed, 32 insertions(+), 2 deletions(-)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3303/1: S3C24XX - add clock enable usage counting

Patch from Ben Dooks

Move to using an enable count for the shared clocks
and protect the clock system using a mutex instead
of just disabling IRQs during the clock update.

Since there is little more code in the path for
non-shared clocks, the enable and disable calls
use the same code for each.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3302/1: make pci=firmware the default for ixp2000

Patch from Lennert Buytenhek

Most ixp2000 boards don't actually work if pci=firmware isn't used, so
the defconfig isn't really the right place to specify this.  Instead of
specifying it in the defconfigs, make the relevant board code take care
of setting pci=firmware.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3301/1: remove unnecessary clock default from ixdp2801 defconfig

Patch from Lennert Buytenhek

The ixdp2x01_clock is already 50MHz by default, so no need to
override it with 50MHz in the ixdp2801 defconfig as is done now,
which is confusing as well.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3300/1: make ixdp2x01 co-exist with other ixp2000 machine types

Patch from Lennert Buytenhek

The ixdp2x01 pci init call doesn't check whether it's really running
on an ixdp2x01, making it impossible to compile one kernel that works
on both the ixdp2x01 and another ixp2000 board.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[IA64] prevent sn2 specific code to be run in generic kernels

Prevent SN2 specific code to be executed on non SN2 platforms when
running a generic kernel.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

[MIPS] Add 'const' to readb and friends

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

[MIPS] Sparse: Add __user tags to syscall.c

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

[MIPS] Wire up new syscalls.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

[MIPS] Make do_signal return void.

It's return value is ignored everywhere.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

[MIPS] Add support for TIF_RESTORE_SIGMASK.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

Merge branch 'for-linus2' of git://git./linux/kernel/git/viro/bird

Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

[PATCH] alpha: set cpu_possible_map much earlier

All the percpu data structure walkers want cpu_possible_map to be
initialized early, but alpha instead populated "hwrpb_cpu_present_mask"
early in setup_smp(), and then initialized cpu_possible_map only much
later.

Thanks go to Heiko Carstens and Dipankar Sarma for noticing.

This fixes it and we can get rid of hwrpb_cpu_present_mask entirely.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SLOB=y && SMP=y fix

fix CONFIG_SLOB=y (when CONFIG_SMP=y): get rid of the 'align' parameter
from its __alloc_percpu() implementation. Boot-tested on x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] block: implement elv_insert and use it (fix ordcolor flipping bug)

q->ordcolor must only be flipped on initial queueing of a hardbarrier
request.

Constructing ordered sequence and requeueing used to pass through
__elv_add_request() which flips q->ordcolor when it sees a barrier
request.

This patch separates out elv_insert() from __elv_add_request() and uses
elv_insert() when constructing ordered sequence and requeueing.
elv_insert() inserts the given request at the specified position and
does nothing else.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ppc: fix up trivial Kconfig config selection

Quoth BenH:
  "Ok, looks like I forgot to update the Kconfig for the new i2c driver,
   it should select I2C_POWERMAC instead.  Do you want a new patch or
   can you just fix it there ?"

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] blk: Fix SG_IO ioctl failure retry looping

When issuing an SG_IO ioctl through sd that resulted in an unrecoverable
error, a nearly infinite retry loop was discovered. This is due to the
fact that the block layer SG_IO code is not setting up rq->retries. This
patch also fixes up the sg_scsi_ioctl path.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@suse.de>

[PATCH] sh: lvalues abuse in arch/sh/boards/renesas/rts7751r2d/io.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] m32r_sio iomem annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] mark HISAX_AMD7930 as broken

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] type-safe min() in prism54

we do min() on u8 and small integer constant; cast the latter to u8.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] powerpc: Thermal control for dual core G5s

This patch adds a windfarm module, windfarm_pm112, for the dual core G5s
(both 2 and 4 core models), keeping the machine from getting into
vacuum-cleaner mode ;) For proper credits, the patch was initially
written by Paul Mackerras, and slightly reworked by me to add overtemp
handling among others. The patch also removes the sysfs attributes from
windfarm_pm81 and windfarm_pm91 and instead adds code to the windfarm
core to automagically expose attributes for sensor & controls.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390 __get_user() bogus warnings removal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] synclink_gt is PCI-only

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] __user annotations in powerpc thread_info

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] fix iomem annotations in dart_iommu

it's int __iomem *, not int * __iomem...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] s390 misc __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] compat_ioctl __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] sn3 iomem annotations and fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] powerpc signal __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] drivers/media/video __user annotations and fixes

* compat_alloc_user_space() returns __user pointer
* copying between two userland areas is copy_in_user(), not copy_from_user()
* dereferencing userland pointers is bad
* so's get_user() from local variables

... plus usual __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] powermac pci iomem annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] s390x compat __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] mips: namespace pollution - mem_... -> __mem_... in io.h

A pile of internal functions use only inside mips io.h has names starting
with mem_... and clashing with names in drivers; renamed to __mem_....

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] arm: fix dependencies for MTD_XIP

MTD_XIP depends on having working asm/mtd-xip.h; it's not just per-architecture
(arm-only, as current Kconfig would have it), but actually per-subarch as
well.  Introduced a new symbol (ARCH_MTD_XIP) set by arch Kconfig; MTD_XIP
depends on it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

[PATCH] powerpc: Fix sound driver use of i2c

The PowerMac sound drivers used to rely on a "bug" of the i2c-keywest
driver that implemented I2C_SMBUS_BLOCK_DATA incorrectly, that is it did
what I2C_SMBUS_I2C_BLOCK_DATA should have done. The new i2c-powermac
driver that replaces keywest has this bug fixed, thus the sound drivers
must be fixed too.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://git./linux/kernel/git/paulus/powerpc-merge

[SPARC64]: Update defconfig.

Do not enable CONFIG_LOCALVERSION_AUTO by default.
When doing kernel development it just leaves a ton
of crap around.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Wire up sys_unshare().

Also, the Solaris syscall table is sized differrently,
and does not go beyond entry 255, so trim off the excess
entries.

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] umount_tree() decrements mount count on wrong dentry

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] nfsroot port= parameter fix [backport of 2.4 fix]

Direct backport of 2.4 fix that didn't get propagated to 2.6; original
comment follows:
<quote>
   When I specify the NFS port for nfsroot (e.g.,
   nfsroot=<dir>,port=2049), the
   kernel uses the wrong port. In my case it tries to use 264 (0x108)
   instead
   of 2049 (0x801).

   This patch adds the missing htons().

   Eric
</quote>

Patch got applied in 2.4.21-pre6.  Author: Eric Lammerts (<eric@lammerts.org>,
AFAICS).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>