media: arm64: dts: amlogic: add rc-videostrong-kii-pro keymap

videostrong kii pro comes with a nec rc, add the keymap to the dts

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: add new kii pro key map

Add new entry for rc-videostrong-kii-pro in linux,rc-map-name

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: iguanair: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: fix spelling mistake "to" -> "too"

There is a spelling mistake in a dev_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vsp1: tidyup VI6_HGT_LBn_H() macro

The address of VSP2_VI6_HGT_LBx_H are
VSP2_VI6_HGT_LB0_H : 0x3428
VSP2_VI6_HGT_LB1_H : 0x3430
VSP2_VI6_HGT_LB2_H : 0x3438
VSP2_VI6_HGT_LB3_H : 0x3440

Thus, VI6_HGT_LBn_H() macro should start from 0x3420 instead of 0x3430.
This patch fixes it.

Fixes: 26e0ca22c3b8 ("[media] v4l: Renesas R-Car VSP1 driver")

Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: smiapp: Move definitions under driver directory

include/media/i2c/smiapp.h was meant to serve systems where the sensor is
enumerated through platform data. That's no longer necessary, hopefully
not even in out-of-tree use cases. Move the definitions to the appropriate
headers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: smiapp: Refactor reading SMIA limits

Combine the two trivial functions reading limits into one. Also rename
smiapp_get_all_limits() as smiapp_read_all_smia_limits().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: smiapp: Move SMIA limit reading up

Move SMIA limit reading up, where other limit and capability handling
takes place.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: smiapp: Turn limit lookup into a function

Instead of direct array access, turn accessing limit information into a
function. Going forward, more elaborate CCS limits will replace most SMIA
limits, and conversion will be less complicated this way.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: smiapp: Use unaligned get and put functions

Use get_unaligned_be* and put_unaligned_be* functions to convert register
values to CPU endianness. Consequently, two instances of BUG() are
removed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: smiapp: Simplify condition for choosing 8-bit access

Use the only8 boolean to determine whether 8-bit access is required for
reading.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: omap3isp: Prevent enabling CCDC when stopping streaming

Commit ... prevented restarting CCDC through its interrupt handler when
it's about to be disabled. It missed to address the case when CCDC might
be enabled due to queueing a buffer. Do that now.

Fixes: dd12ed17ce9e ("omap3isp: Don't restart CCDC if we're about to stop")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: MAINTAINERS: Sort entries in database for TI VPE/CAL

Run parse-maintainers.pl and choose TI VPE/CAL record. Fix it accordingly.

Note, this is urgent fix, without which parse-maintainers.pl throws
an exception:

Odd non-pattern line '  Documentation/devicetree/bindings/media/ti,cal.yaml
' for 'TI VPE/CAL DRIVERS' at scripts/parse-maintainers.pl line 147, <$file> line 16770.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: staging: media: ipu3: Change 'unsigned long int' to 'unsigned long'

This patch fixes the checkpatch.pl warning:

WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is
unnecessary

Signed-off-by: Jean-Baptiste Jouband <jj.jouband@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: i2c: Add driver for Sony IMX219 sensor

Adds a driver for the 8MPix Sony IMX219 CSI2 sensor.
Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver
currently only supports 2 lanes.
8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned)
@ 30fps are currently supported.

[Sakari Ailus: make imx219_check_hwcfg static]

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Add YAML device tree binding for IMX219 CMOS image sensor, and
the relevant MAINTAINERS entries.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: ipu3.rst: add imgu pipe config tool link

A specific tool which can be used to generate imgu intermedia
resolutions now is public on github, this patch adds this information
into ipu3.rst.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: ov5675: add vflip/hflip control support

- Add V4L2 controls: horizontal/vertical flip,
  keep SGRBG10 Bayer order output (via change v/hflip)
- Fix Bayer order output in 1296x972 binning registers

Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: dt-bindings: media: venus: Add sc7180 DT schema

Add new qcom,sc7180-venus DT binding schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: add sc7180 DT compatible and resource struct

This add DT compatible string and resource structure for sc7180.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: venus: delete old binding document

After transitioning to YAML DT schema we don't need this old-style
document.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: add sdm845-v2 DT compatible and resource struct

In order to use dynamic video codec assignment add a new sdm845-v2
DT compatible and new venus_resource structure to cover the binding
where all pmdomains and clocks are under the venus_core control.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: venus: Add sdm845v2 DT schema

Add new qcom,sdm845-venus-v2 DT binding schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: venus: Convert sdm845 to DT schema

Convert qcom,sdm845-venus Venus binding to DT schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: venus: Convert msm8996 to DT schema

Convert qcom,msm8996-venus Venus binding to DT schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: venus: Convert msm8916 to DT schema

Convert qcom,msm8916-venus Venus binding to DT schema

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: vdec: handle 10bit bitstreams

Handle 10bit video streams in the decoder by using dithering, i.e
the decoder output buffers will be in 8bit format.

The runtime handling is implemented by sending v4l2 event to
userspace application, then the application should stop the
streaming on capture queue and initiate format negotiation, and
start streaming again.

Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: introduce core selection

Presently the core (vcodec pipelines) assignment is static. Here we
introduce dynamic load balancing across the cores depending on the
current session load. The load on earch core is calculated and core
with minimum load is assigned to given instance. This will be
applicable on Venus v4 with more than one vcodec cores.

Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: redesign clocks and pm domains control

Redesign core (vcodec) clock control to give the venus core more
freedom to control them in order to make possible to use core
selection feature on Venus IP v4.

Move all clock and pmdomain functions in separate file and abstract
power control with common operations per Venus IP version.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: cache vb payload to be used by clock scaling

Instead of iterate over previously queued buffers in clock
scaling code do cache the payload in instance context structure
for later use when calculating new clock rate.

This will avoid to use spin locks during buffer list iteration
in clock_scaling.

This fixes following kernel Oops:

 Unable to handle kernel paging request at virtual address deacfffffffffd6c
 Mem abort info:
   ESR = 0x96000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
 [deacfffffffffd6c] address between user and kernel address ranges
 Internal error: Oops: 96000004 [#1] PREEMPT SMP
 CPU: 7 PID: 5763 Comm: V4L2DecoderThre Tainted: G S      W         5.4.11 #8
 pstate: 20400009 (nzCv daif +PAN -UAO)
 pc : load_scale_v4+0x4c/0x2bc [venus_core]
 lr : session_process_buf+0x18c/0x1c0 [venus_core]
 sp : ffffffc01376b8d0
 x29: ffffffc01376b8d0 x28: ffffff80cf1b0220
 x27: ffffffc01376bba0 x26: ffffffd8f562b2d8
 x25: ffffff80cf1b0220 x24: 0000000000000005
 x23: ffffffd8f5620d98 x22: ffffff80ca01c800
 x21: ffffff80cf1b0000 x20: ffffff8149490080
 x19: ffffff8174b2c010 x18: 0000000000000000
 x17: 0000000000000000 x16: ffffffd96ee3a0dc
 x15: 0000000000000026 x14: 0000000000000026
 x13: 00000000000055ac x12: 0000000000000001
 x11: deacfffffffffd6c x10: dead000000000100
 x9 : ffffff80ca01cf28 x8 : 0000000000000026
 x7 : 0000000000000000 x6 : ffffff80cdd899c0
 x5 : ffffff80cdd899c0 x4 : 0000000000000008
 x3 : ffffff80ca01cf28 x2 : ffffff80ca01cf28
 x1 : ffffff80d47ffc00 x0 : ffffff80cf1b0000
 Call trace:
  load_scale_v4+0x4c/0x2bc [venus_core]
  session_process_buf+0x18c/0x1c0 [venus_core]
  venus_helper_vb2_buf_queue+0x7c/0xf0 [venus_core]
  __enqueue_in_driver+0xe4/0xfc [videobuf2_common]
  vb2_core_qbuf+0x15c/0x338 [videobuf2_common]
  vb2_qbuf+0x78/0xb8 [videobuf2_v4l2]
  v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem]
  v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem]
  v4l_qbuf+0x48/0x58
  __video_do_ioctl+0x2b0/0x39c
  video_usercopy+0x394/0x710
  video_ioctl2+0x38/0x48
  v4l2_ioctl+0x6c/0x80
  do_video_ioctl+0xb00/0x2874
  v4l2_compat_ioctl32+0x5c/0xcc
  __se_compat_sys_ioctl+0x100/0x2074
  __arm64_compat_sys_ioctl+0x20/0x2c
  el0_svc_common+0xa4/0x154
  el0_svc_compat_handler+0x2c/0x38
  el0_svc_compat+0x8/0x10
 Code: eb0a013f 54000200 aa1f03e8 d10e514b (b940016c)
 ---[ end trace e11304b46552e0b9 ]---

Fixes: c0e284ccfeda ("media: venus: Update clock scaling")

Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: venc: blacklist two encoder properties

Those two properties are not implemented for Venus v4 (sdm845),
thus don't set them to firmware.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: firmware: Use %pR to print IO resource

Replace explicit use of members of struct resource by %pR to print
the resource.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi_parser: Ignore HEVC encoding for V1

Some older MSM8916 Venus firmware versions also seem to indicate
support for encoding HEVC, even though they really can't.
This will lead to errors later because hfi_session_init() fails
in this case.

HEVC is already ignored for "dec_codecs", so add the same for
"enc_codecs" to make these old firmware versions work correctly.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: MAINTAINERS: Add dt-binding files for Venus

Adds a path to devicetree dt-binding files.

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/imx: Missing assignment in imx_media_capture_device_register()

There was supposed to be a "ret = " assignment here, otherwise the
error handling on the next line won't work.

Fixes: 64b5a49df486 ("[media] media: imx: Add Capture Device Interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Documentation/media/uapi: more readable unions

Avoid adding an extra columns when describing unions in the documentation.
That makes it much harder to read. See e.g. VIDIOC_QUERY_EXT_CTRLS.

Instead start off a union with 'union {' and end it with an extra row
containing '}'.

This leaves a lot more space for the description of the fields.

This formatting technique was used in a few places already, but this
patches fixes all remaining occurrences of 'union' in the media uAPI.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: add serialization to the resizer subdev ops

For subdevices drivers, the drivers themself are responsible
for serializing their operations.
This patch adds serialization to the resizer subdevice.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: add serialization to the isp subdev ops

For subdevices drivers, the drivers themself are responsible
for serializing their operations.
This patch adds serialization to the isp subdevice.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: isp: check for dphy bus before initializations in s_stream

In rkisp1_isp_s_stream it is better to return error in case the
bus type is not dphy before initializing the registers.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: change function to return void instead of int

There are functions that return int but actually return always 0.
Change them to return void and then there is no need to check
for error return value.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: isp: do not set invalid mbus code for pad

When setting source pad, check if the given mbus code is indeed valid
for source pad, if not, then set the default code.
Same for sink pad.

Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Reported-by: Wojciech Zabolotny <wzab01@gmail.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: rsz: return to userspace the crop value in bayer mainpath

If bayer format is set in mainpath, then crop is not supported.
The core was just resetting crop but wasn't returning the values back to
user space.

Return values taken in consideration by the driver to userpace.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: rsz: don't ignore set format in bayer mainpath

Fix issue when, in case of raw bayer format in mainpath,
VIDIOC_SUBDEV_S_FMT ioctl didn't have any effect, is wasn't updating the
format of the pad.

There is no crop for mainpath bayer raw data. Remove leftover check in
set_format, since check is already done in crop rkisp1_rsz_set_sink_crop()
function.

Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: stats: use consistent bus_info string

Stats entity is using a slightly different bus_info string
"platform: rkisp1" (with a space) instead of "platform:rkisp1" used by
the rest of rkisp1 code.
This causes errors when using v4l2-util tools that uses the bus_info
string to identify the device.

Fixes: 9a28dbd65a88 ("media: staging: rkisp1: add capture device for statistics")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: use consistent bus_info string for media_dev

Media device is using a slightly different bus_info string
"platform: rkisp1" (with a space) instead of "platform:rkisp1" used by
the rest of rkisp1 code.
This causes errors when using v4l2-util tools that uses the bus_info
string to identify the device.

Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: improve inner documentation in rkisp1-isp.c

Improve the documentation in the beginning of the file
rkisp1-isp1.c

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: fix test of return value of media_entity_get_fwnode_pad

media_entity_get_fwnode_pad returns negative value on error
and the pad numeber on success. Therefore change the error test
from 'if (ret)' to 'if (ret < 0)' .

Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: don't lock media's graph_mutex when calling rkisp1_create_links

The function rkisp1_create_links calls media_entity_get_fwnode_pad
and media_create_pad_link in the mc api. Those calls don't require
locking the graph_mutex so remove the locking.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mc-entity.c: use WARN_ON, validate link pads

Use WARN_ON instead of BUG_ON.

Add two new WARN_ONs to verify that the source pad is really a source
and that the sink pad is really a sink.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use ! instead of == NULL for source and sink]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: Add binding for rk3228 rga

Indicate that the rk3228 rga is compatible with that of the rk3288.

But if any rk3228-specific quirks are identified in future that
require handling logic that differs from what is provided for the
rk3288, then allow for the compatibility string "rockchip,rk3228-rga"
to be matched instead of "rockchip,rk3288-rga".

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: Prevent encoders from using post-processing

The post-processing feature is meant to be used by decoding
only. Prevent encoding jobs from enabling it.

Fixes: 8c2d66b036c77 ("media: hantro: Support color conversion via post-processing")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: fix extra MV/MC sync space calculation

Add space for MVs and MC sync data to the capture buffers depending on
whether the post processor will be enabled for the new capture format
passed to TRY_FMT, not the currently set capture format.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: Write quantization table registers in increasing addresses order

Luma and chroma qtables need to be written into two 16-register blocks,
each table consisting of 64 bytes total. The blocks are contiguous and
start at offset 0 for luma and at offset 0x40 for chroma.

The seemingly innocent optimization of writing the two blocks using one
loop causes side effects which result in improper values of quantization
tables being used by the hardware during encoding. Visually this results
in macroblocking artifacts around contrasting edges in encoded images. The
artifacts look like horizontally flipped shadows of the said edges.
Changing the write operations to non-relaxed variant doesn't help.

This patch removes this premature optimization and after this change the
macroblocking artifacts around contrasting edges are gone.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: Write the quantization tables in proper order

The quantization tables as defined in the file (luma_q_table,
chroma_q_table) are in fact in linear order. The JPEG file header, which is
not generated by the hardware, but must be programatically created with the
CPU, expects the table in zigzag order. On the other hand, the hardware
doesn't expect neither linear, nor zigzag order. Instead it expects the
quantization tables in vertical groups of four quantization parameters,
and the groups are organized in blocks of two vertically adjacent groups.
On top of that the blocks must be provided to the hardware in this order:
leftmost top block, leftmost bottom block, second leftmost top block,
second leftmost bottom block and so on. So, if this is the quantization
table in linear order:

0x10, 0x0b, 0x0a, 0x10, 0x18, 0x28, 0x33, 0x3d,
0x0c, 0x0c, 0x0e, 0x13, 0x1a, 0x3a, 0x3c, 0x37,
0x0e, 0x0d, 0x10, 0x18, 0x28, 0x39, 0x45, 0x38,
0x0e, 0x11, 0x16, 0x1d, 0x33, 0x57, 0x50, 0x3e,
0x12, 0x16, 0x25, 0x38, 0x44, 0x6d, 0x67, 0x4d,
0x18, 0x23, 0x37, 0x40, 0x51, 0x68, 0x71, 0x5c,
0x31, 0x40, 0x4e, 0x57, 0x67, 0x79, 0x78, 0x65,
0x48, 0x5c, 0x5f, 0x62, 0x70, 0x64, 0x67, 0x63

then the hardware expects this in its consecutive registers:

0x100c0e0e,
0x0b0c0d11,
0x12183148,
0x1623405c,
0x0a0e1016,
0x1013181d,
0x25374e5f,
0x38405762,

and so on.

Consequently, the same area of memory cannot be used both for dumping it
into the JPEG file header and writing its contents to the hardware
registers. Instead, a separate pair of arrays is added for properly
reordered quantization tables, to be read with get_unaligned_be32()
and linearly written to the registers.

The "ctx" parameter is not needed any more for hantro_jpeg_get_qtable().

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: Use standard luma quantization table

The table is actually different in the document than in this file, so align
this file with the document.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: Read be32 words starting at every fourth byte

Since (luma/chroma)_qtable is an array of unsigned char, indexing it
returns consecutive byte locations, but we are supposed to read the arrays
in four-byte words. Consequently, we should be pointing
get_unaligned_be32() at consecutive word locations instead.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Cc: stable@vger.kernel.org
Fixes: 00c30f42c7595f "media: rockchip vpu: remove some unused vars"
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: allegro: fix spelling mistake "to" -> "too"

There is a spelling mistake in a v4l2_err message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vimc: streamer: if kthread_stop fails, ignore the error

Ignore errors returned from kthread_stop since the
vimc subdevices should still be notified that
streaming stopped so they can release the memory for
the streaming, and also kthread should be set to NULL.
kthread_stop can return -EINTR in case the thread
did not yet run. This can happen if userspace calls
streamon and streamoff right after.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: media: rkisp1: make links immutable by default

The only places which make sese to allow users to enable or disable
links are:

* between sensors and isp:
So users can select which sensor should be used while streaming

* between isp and the resizers:
              |
              v here
rkisp1_isp:2 -> rkisp1_resizer_mainpath -> rkisp1_mainpath (capture)
            \-> rkisp1_resizer_selfpath -> rkisp1_selfpath (capture)
              ^ here
              |

So users can disable one of the capture paths when unused, to avoid
worring about matching formats.

Make the following links immutable to simplify userspace:

rkisp1_resizer_mainpath -> rkisp1_mainpath
rkisp1_resizer_selfpath -> rkisp1_selfpath
rkisp1_params           -> rkisp1_isp
rkisp1_isp              -> rkisp1_stats

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: davinci: fix incorrect pix_fmt assignment

There's a mistakenly written self assignment in
`static int vpfe_enum_fmt_vid_cap(..)`.

Fixed it according to Prabhakar Lad's feedback.

Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: sun8i: Remove redundant platform_get_irq error message

platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-dev.h: remove VFL_TYPE_GRABBER

The last driver was converted to use VFL_TYPE_VIDEO, so the old
_GRABBER enum can now be removed.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/platform: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/pci: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/i2c/video-i2c: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/common/saa7146: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/usb: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/most: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christian Gromm <christian.gromm@microchip.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/media: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: bcm2835-camera: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: gadget: uvc: rename VFL_TYPE_GRABBER to _VIDEO

'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rename VFL_TYPE_GRABBER to _VIDEO

We currently have the following devnode types:

enum vfl_devnode_type {
        VFL_TYPE_GRABBER        = 0,
        VFL_TYPE_VBI,
        VFL_TYPE_RADIO,
        VFL_TYPE_SUBDEV,
        VFL_TYPE_SDR,
        VFL_TYPE_TOUCH,
        VFL_TYPE_MAX /* Shall be the last one */
};

They all make sense, except for the first: GRABBER really refers to /dev/videoX
devices, which can be capture, output or m2m, so 'grabber' doesn't even refer to
their function anymore.

Let's call a spade a spade and rename this to VFL_TYPE_VIDEO.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: allegro: add missed checks in allegro_open()

allegro_open() misses checks for v4l2_m2m_ctx_init() and results of
v4l2_ctrl_new* calls.
Add checks and error handlers to fix the problems.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: exynos4-is: add missed clk_disable_unprepare in remove

This driver forgets to disable and unprepare clock when remove.
Add a call to clk_disable_unprepare() to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: add keymap for Videostrong KII Pro

This is an NEC remote control device shipped with the Videostrong KII Pro
tv box as well as other devices from videostrong.

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: drxj: remove redundant assignments to variable rc

The variable rc is being initialized with a value that is never
read and it is being updated later with a new value.  The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dib0700: fix rc endpoint lookup

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid submitting an URB to an invalid endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc: stable <stable@vger.kernel.org> # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: flexcop-usb: fix endpoint sanity check

commit 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking") added
an endpoint sanity check to address a NULL-pointer dereference on probe.
Unfortunately the check was done on the current altsetting which was later
changed.

Fix this by moving the sanity check to after the altsetting is changed.

Fixes: 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}

The hardware does not support capturing the field types
V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT. To capture in these formats the
driver needs to adjust the offset of the capture buffer and capture
twice to each vb2 buffer.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-vin: Move hardware buffer tracking to own struct

To support SEQ_TB/BT not all buffers given to the hardware will be
equal, the driver needs to keep track of different buffer types. Move
the tracking of buffers given to hardware into a struct so additional
tracking fields can be associated with each buffer.

[hverkuil: fix small checkpatch warning]

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: xilinx: Use dma_request_chan() instead dma_request_slave_channel()

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vimc: streamer: fix memory leak in vimc subdevs if kthread_run fails

In case kthread_run fails, the vimc subdevices
should be notified that streaming stopped so they can
release the memory for the streaming. Also, kthread should be
set to NULL.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: adv7180: Add init_cfg pad operation

Add a init_cfg pad operation so that configurations allocated with
v4l2_subdev_alloc_pad_config() are initialized.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidioc-queryctrl.rst: fix error code

An attempt to get a BUTTON control returns EACCES, not EINVAL.

BUTTON controls have V4L2_CTRL_FLAG_WRITE_ONLY set, and the documentation
for that flag correctly says that getting a write-only control returns
EACCES. It's the description of the BUTTON type that's wrong, so fix
that so they are consistent.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: usbtv: fix control-message timeouts

The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on
various user requests due to a malfunctioning (or malicious) device
until the device is physically disconnected.

The USB upper limit of five seconds per request should be more than
enough.

Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes: c53a846c48f2 ("[media] usbtv: add video controls")
Cc: stable <stable@vger.kernel.org> # 3.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: MAINTAINERS: add atmel-isc-media.h file to ATMEL ISC driver

Add new file include/linux/atmel-isc-media.h to ATMEL ISC entry.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: atmel: atmel-isc-base: expose white balance as v4l2 controls

This exposes the white balance configuration of the ISC as v4l2 controls
into userspace.
There are 8 controls available:
4 gain controls, sliders, for each of the BAYER components: R, B, GR, GB.
These gains are multipliers for each component, in format unsigned 0:4:9
with a default value of 512 (1.0 multiplier).
4 offset controls, sliders, for each of the BAYER components: R, B, GR, GB.
These offsets are added/substracted from each component, in format signed
1:12:0 with a default value of 0 (+/- 0)

To expose this to userspace, added 8 custom controls, in an auto cluster.

To summarize the functionality:
The auto cluster switch is the auto white balance control, and it works
like this:
AWB == 1: autowhitebalance is on, the do_white_balance button is inactive,
the gains/offsets are inactive, but volatile and readable.
Thus, the results of the whitebalance algorithm are available to userspace
to read at any time.
AWB == 0: autowhitebalance is off, cluster is in manual mode, user can
configure the gain/offsets directly. More than that, if the
do_white_balance button is pressed, the driver will perform
one-time-adjustment, (preferably with color checker card) and the userspace
can read again the new values.

With this feature, the userspace can save the coefficients and reinstall
them for example after reboot or reprobing the driver.

[hverkuil: fix checkpatch warning]
[hverkuil: minor spacing adjustments in the functionality description]

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: video: aspeed: Update copyright information

Use the preferred form for GPL2+, and add IBM and Intel as the authors.
The driver was initially upstreamed by Eddie from IBM, and has had major
contributions from Jae at Intel.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: aspeed: Use runtime configuration

The aspeed video IP has some differences between SoC families. Currently
the driver decides which registers to use at compile time, which means
a single kernel can not be used between platforms.

Switch to using runtime configuration of the registers that vary between
SoC families. This is in preparation for upcoming ast2600 support.

[hverkuil: replace ;; by ;]

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: aspeed: Rework memory mapping in probe

Use the recently introduced function devm_platform_ioremap_resource to
save a few lines of code. This makes the driver match common platform
device probe patterns.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Documentation: dt-bindings: media: add AST2600 Video Engine support

The AST2600 has Video Engine so add the compatible string into the
document.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar_drif: Use dma_request_chan() instead dma_request_slave_channel()

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: pxa_camera: Use dma_request_chan() instead dma_request_slave_channel()

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: hantro: Support H264 profile control

The Hantro G1 decoder supports H.264 profiles from Baseline to High, with
the exception of the Extended profile.

Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the
applications can query the driver for the list of supported profiles.

Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: stm32-dcmi: Use dma_request_chan() instead dma_request_slave_channel()

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cx231xx: constify copied structure

The hauppauge_955q_lgdt3306a_config structure is only copied
into another structure, so make it const.

The opportunity for this change was found using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: isif: constify copied structure

The isif_config_defaults structure is only copied into another
structure, so make it const.

The opportunity for this change was found using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: anysee: constify copied structure

The anysee_tda18212_config and anysee_tda18212_config2 structures
are only copied into other structures, so make them const.

The opportunity for this change was found using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/saa7146: fix incorrect assertion in saa7146_buffer_finish

In saa7146_buffer_finish, the code for q->curr to be NULL is
already present and asserting for NULL is unnecessary. This patch
elimiates such a check.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-core: v4l2-i2c: convert to new API with ERRPTR

Use the new APIs instead of the deprecated ones.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>