Merge tag 'drm-intel-next-2022-06-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- General driver clean-up (Jani, Ville, Julia)
- DG2 enabling (Anusha, Vandita)
- Fix sparse warnings (Imre, Jani)
- DMC MMIO range checks (Anusha)
- Audio related fixes (Jani)
- Runtime PM fixes (Anshuman)
- PSR fixes (Jouni, Jose)
- Media freq factor and per-gt enhancements (Ashutosh, Dale)
- DSI fixes for ICL+ (Jani)
- Disable DMC flip queue handlers (Imre)
- ADL_P voltage swing updates (Balasubramani)
- Use more the VBT for panel information (Ville, Animesh)
- Fix on Type-C ports with TBT mode (Vivek)
- Improve fastset and allow seamless M/N changes (Ville)
- Accept more fixed modes with VRR/DMRRS panels (Ville)
- FBC fix (Jose)
- Remove noise logs (Luca)
- Disable connector polling for a headless SKU (Jouni)
- Sanitize display underrun reporting (Ville)
- ADL-S display PLL w/a (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrNzP2WTf3WBvpvd@intel.com

Merge tag 'drm-misc-next-2022-06-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.20:

UAPI Changes:

 * media: Add various RGB666 and RGB888 format constants

Cross-subsystem Changes:

 * media: Documentation

Core Changes:

 * aperture: Fix segfault during hot-unplug

 * dp: Support waiting for HDP signal, plus driver updates;
   Port-validation fixes

 * fbcon: Improve scrolling performance; Sanitize input

 * Clean up <drm/drm_crtc.h>

Driver Changes:

 * amdgpu: Cleanups

 * bridge: Add support for i.MX8qxp and i.MX8qm; anx7625: DPI fixes;
   tc358775: Fix clock settings; ti-sn65dsi83: Allow GPIO to sleep

 * panel: Set orientation from panel, plus driver updates

 * Several small cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YrQeAAVvQ6jxu2dl@linux-uq9g

drm/hyperv-drm: Include framebuffer and EDID headers

Fix a number of compile errors by including the correct header
files. Examples are shown below.

  ../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_blit_to_vram_rect':
  ../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:25:48: error: invalid use of undefined type 'struct drm_framebuffer'
   25 |         struct hyperv_drm_device *hv = to_hv(fb->dev);
      |                                                ^~

  ../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_connector_get_modes':
  ../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:59:17: error: implicit declaration of function 'drm_add_modes_noedid' [-Werror=implicit-function-declaration]
   59 |         count = drm_add_modes_noedid(connector,
      |                 ^~~~~~~~~~~~~~~~~~~~

  ../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:62:9: error: implicit declaration of function 'drm_set_preferred_mode'; did you mean 'drm_mm_reserve_node'? [-Werror=implicit-function-declaration]
   62 |         drm_set_preferred_mode(connector, hv->preferred_width,
      |         ^~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Fixes: 720cf96d8fec ("drm: Drop drm_framebuffer.h from drm_crtc.h")
Fixes: 255490f9150d ("drm: Drop drm_edid.h from drm_crtc.h")
Cc: Deepak Rawat <drawat.floss@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622083413.12573-1-tzimmermann@suse.de

GPU: drm: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: drivers/gpu/drm/drm_ioctl.c
line: 86
*    means the the unique name for the master node just opening is _not_ filled
changed to
*    means the unique name for the master node just opening is _not_ filled

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621135140.12200-1-jiangjian@cdjrlc.com

drm: panel-orientation-quirks: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: drivers/gpu/drm/drm_panel_orientation_quirks.c
line: 196
* GPD Pocket, note that the the DMI data is less generic then
changed to
* GPD Pocket, note that the DMI data is less generic then

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621134401.10290-1-jiangjian@cdjrlc.com

drm/vc4: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: drivers/gpu/drm/vc4/vc4_regs.h
line: 267
/* Set when the the downstream tries to read from the display FIFO
changed to
/* Set when the downstream tries to read from the display FIFO

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621130550.126915-1-jiangjian@cdjrlc.com

drm/prime: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: drivers/gpu/drm/drm_prime.c
line: 842
* of the the buffer described by the provided sg_table.
changed to
* of the buffer described by the provided sg_table.

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621130210.125461-1-jiangjian@cdjrlc.com

Merge tag 'drm-misc-next-2022-06-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.20:

UAPI Changes:

Cross-subsystem Changes:

 * dma-buf: Add sync-file API; Set DMA mask for udmabuf devices

 * fbcon: Cleanups

 * fbdev: Disable firmware-device registration when first native driver loads

 * iosys-map: Documentation fixes

Core Changes:

 * edid: Use struct drm_edid in more places

 * gem-cma-helper: Improve documentation

 * of: Add data-lane helpers and convert drivers

 * syncobj: Fixes

Driver Changes:

 * amdgpu: Build fixes

 * ast: Support multiple outputs

 * bochs: Include <linux/module.h>

 * bridge: adv7511: I2C fixes; anx7625: Fix error handling; lt6505: Kconfig fixes

 * display/dp: Documentation fixes

 * display/dp-mst: Read extended DPCD capabilities during system resume

 * logicvc: Add new driver

 * magag200: Build fixes

 * nouveau: Cleanups

 * panel: Add backlight support; nt36672a: DT backlight support

 * qxl: Cleanups

 * sun4i: HDMI PHY cleanups

 * vc4: Add support for BCM2711

 * virt-gpu: Avoid NULL dereference; Fix error checks; Cleanups

 * vkms: Allocate output buffer with vmalloc(); Fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YqwriEhn0l4uO+Gn@linux-uq9g

drm/nouveau/mmu: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
line: 1051
 * have the the deepest nesting of page tables.
changed to
 * have the deepest nesting of page tables.

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621133920.8112-1-jiangjian@cdjrlc.com

drm/dp_mst: Get rid of old comment in drm_atomic_get_mst_topology_state docs

We don't actually care about connection_mutex here anymore, so let's get
rid of the comment mentioning it in this function's kdocs.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602201757.30431-4-lyude@redhat.com

drm/display/dp_mst: Don't validate port refs in drm_dp_check_and_send_link_address()

Drive-by cleanup, we don't need to validate the port references here as we
already previously went through the effort of refactoring things such that
we're guaranteed to be able to access ->mstb and ->port safely from
drm_dp_check_and_send_link_address(), since the only two places in the
codebase that drop an MST reference in such a way that it would remove it
from the topology are both protected under probe_lock.

Thanks for that, past Lyude!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602201757.30431-2-lyude@redhat.com

drm/display: Remove duplicate 'the' in two places.

there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/display/drm_dp_helper.c
line: 1600
  * Doesn't account the the "MOT" bit, and instead assumes each
changed to
  * Doesn't account the "MOT" bit, and instead assumes eac

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621190055.8323-1-jiangjian@cdjrlc.com

drm/bridge: parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux

This implements the callback added by the patch ("drm/dp: Add
wait_hpd_asserted() callback to struct drm_dp_aux").

With this change and all the two "DP AUX Endpoint" drivers changed to
use wait_hpd_asserted(), we no longer need to have an long delay in
the AUX transfer function. It's up to the panel code to make sure that
the panel is powered now. If someone tried to call the aux transfer
function without making sure the panel is powered we'll just get a
normal transfer failure.

We'll still keep the wait for HPD in the pre_enable() function. Though
it's probably not actually needed there, this driver is used in the
old mode (pre-DP AUX Endpoints) and it may be important for those
cases. If nothing else, it shouldn't cause any big problems.

NOTE: When handling the timeout for HPD we start the timer _after_
we've runtime resumed the device. This is definitely important for the
panel on my homestar which comes up 170 ms after we start timing (the
panel specifies 200 ms max). It's a little unclear how much of this
extra time is due to some internal state machine in the parade
firmware vs. debouncing but it seems to work for the two test cases I
have to do it this way.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.4.Ie827321ce263be52fdb8c1276f6f8cc00d78029f@changeid

drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux

Let's add support for being able to read the HPD pin even if it's
hooked directly to the controller. This will let us take away the
waiting in the AUX transfer functions of the eDP controller drivers.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.3.I9ee239f6b95b944c8fa030f300ad222a7af9899d@changeid

drm/panel-edp: Take advantage of wait_hpd_asserted() in struct drm_dp_aux

Let's add support for being able to read the HPD pin even if it's
hooked directly to the controller. This will allow us to get more
accurate delays also lets us take away the waiting in the AUX transfer
functions of the eDP controller drivers.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.2.Icea616f57331fbaa3d48c529f300c9a8ebd37fb5@changeid

drm/dp: Add wait_hpd_asserted() callback to struct drm_dp_aux

Sometimes it's useful for users of the DP AUX bus (like panels) to be
able to poll HPD. Let's add a callback that allows DP AUX busses
drivers to provide this.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.1.Icf57bb12233a47727013c6ab69eebf803e22ebc1@changeid

drm: Config orientation property if panel provides it

Panel orientation property should be set before drm_dev_register().
Some drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.

In drm_bridge_connector_init(), if a bridge is a panel bridge, use it to
set the connector's panel orientation property.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-9-hsinyi@chromium.org

drm/panel: elida-kd35t133: Implement .get_orientation callback

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-8-hsinyi@chromium.org

drm/panel: ili9881c: Implement .get_orientation callback

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-7-hsinyi@chromium.org

drm/panel: panel-simple: Implement .get_orientation callback

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation and double blank line]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-6-hsinyi@chromium.org

drm/panel: lvds: Implement .get_orientation callback

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-5-hsinyi@chromium.org

drm/panel: panel-edp: Implement .get_orientation callback

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-4-hsinyi@chromium.org

drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-3-hsinyi@chromium.org

drm/panel: Add an API to allow drm to set orientation from panel

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_orientation_from_panel() before
drm_dev_register().

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: removed space before tab]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-2-hsinyi@chromium.org

drm/aperture: Run fbdev removal before internal helpers

Always run fbdev removal first to remove simpledrm via
sysfb_disable(). This clears the internal state. The later call
to drm_aperture_detach_drivers() then does nothing. Otherwise,
with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.

Example backtrace show below:

[   11.663422] ==================================================================
[   11.663426] BUG: KASAN: use-after-free in device_del+0x79/0x5f0
[   11.663435] Read of size 8 at addr ffff888108185050 by task systemd-udevd/311
[   11.663440] CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G            E     5
.19.0-rc2-1-default+ #1689
[   11.663445] Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011
[   11.663447] Call Trace:
[   11.663449]  <TASK>
[   11.663451]  ? device_del+0x79/0x5f0
[   11.663456]  dump_stack_lvl+0x5b/0x73
[   11.663462]  print_address_description.constprop.0+0x1f/0x1b0
[   11.663468]  ? device_del+0x79/0x5f0
[   11.663471]  ? device_del+0x79/0x5f0
[   11.663475]  print_report.cold+0x3c/0x21c
[   11.663481]  ? lock_acquired+0x87/0x1e0
[   11.663484]  ? lock_acquired+0x87/0x1e0
[   11.663489]  ? device_del+0x79/0x5f0
[   11.663492]  kasan_report+0xbf/0xf0
[   11.663498]  ? device_del+0x79/0x5f0
[   11.663503]  device_del+0x79/0x5f0
[   11.663509]  ? device_remove_attrs+0x170/0x170
[   11.663514]  ? lock_is_held_type+0xe8/0x140
[   11.663523]  platform_device_del.part.0+0x19/0xe0
[   11.663530]  platform_device_unregister+0x1c/0x30
[   11.663535]  sysfb_disable+0x2d/0x70
[   11.663540]  remove_conflicting_framebuffers+0x1c/0xf0
[   11.663546]  remove_conflicting_pci_framebuffers+0x130/0x1a0
[   11.663554]  drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0
[   11.663561]  ? mgag200_pci_remove+0x30/0x30 [mgag200]
[   11.663578]  mgag200_pci_probe+0x2d/0x140 [mgag200]

Reported-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Fixes: 873eb3b11860 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617121027.30273-1-tzimmermann@suse.de

drm/xlnx: Fix build failure due to missing include

Dropping drm_blend.h from drm_crtc.h broke the
xlnx driver. Make it build again by including
drm_blend.h from the driver directly.

My .config was missing some required dependencies so
I never build tested it :/

Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 90bb087f6674 ("drm: Drop drm_blend.h from drm_crtc.h")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621075648.7717-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/amdgpu/display: drop set but unused variable

Fixes this warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9143:27: warning: variable 'abo' set but not used [-Wunused-but-set-variable]

Fixes: 047de3f17a83 ("drm/amdgpu: switch DM to atomic fence helpers v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616203538.649041-1-alexander.deucher@amd.com

drm: Drop drm_connector.h from drm_crtc.h

drm_crtc.h has no need for drm_connector.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_connector.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-5-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm: Drop drm_blend.h from drm_crtc.h

drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.

Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm: Drop drm_edid.h from drm_crtc.h

drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.

Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/bridge: ti-sn65dsi83: Allow GPIO operations to sleep

There is no need to require non-sleeping GPIO access. Silence the
WARN_ON() if GPIO is using e.g. I2C expanders.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-2-alexander.stein@ew.tq-group.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: ti-sn65dsi83: add more dev_err_probe

Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER
might have several causes, these messages help finding the origin.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-1-alexander.stein@ew.tq-group.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation

Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.

Tested-by: Jiri Vanek <jirivanek1@gmail.com>
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-3-jirivanek1@gmail.com

drm/bridge/tc358775: Return before displaying inappropriate error message

Function for reading from i2c device register displays error message even
if reading ends correctly. Add return to avoid falling through into
the fail label.

Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-2-jirivanek1@gmail.com

MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs

Add myself as the maintainer of DRM bridge drivers for i.MX SoCs.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-15-victor.liu@nxp.com

dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding

This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-14-victor.liu@nxp.com

drm/bridge: imx: Add LDB support for i.MX8qm

This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper.  The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards.  The two channels can be used
simultaneously, either in dual mode or split mode.  In dual mode, the
two channels output identical data.  In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels.  This patch supports the
LDB single mode and split mode.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com

drm/bridge: imx: Add LDB support for i.MX8qxp

This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper.  The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards.  The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display.  The channel indexes have to be
different.  Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge binding

This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB).

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-11-victor.liu@nxp.com

drm/bridge: imx: Add LDB driver helper support

This patch adds a helper to support LDB drm bridge drivers for
i.MX SoCs.  Helper functions supported by this helper should
implement common logics for all LDB modules embedded in i.MX SoCs.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-10-victor.liu@nxp.com

drm/bridge: imx: Add i.MX8qxp pixel link to DPI support

This patch adds a drm bridge driver for i.MX8qxp pixel link to display
pixel interface(PXL2DPI).  The PXL2DPI interfaces the pixel link 36-bit
data output and the DSI controller’s MIPI-DPI 24-bit data input, and
inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap
the pixel color codings between those modules. The PXL2DPI is purely
combinatorial.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-9-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding

This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI).

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-8-victor.liu@nxp.com

drm/bridge: imx: Add i.MX8qm/qxp display pixel link support

This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link.
The pixel link forms a standard asynchronous linkage between
pixel sources(display controller or camera module) and pixel
consumers(imaging or displays).  It consists of two distinct
functions, a pixel transfer function and a control interface.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-7-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link binding

This patch adds bindings for i.MX8qm/qxp display pixel link.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-6-victor.liu@nxp.com

drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support

This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens.  The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel.  For now, the driver only supports
the bypass mode.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding

This patch adds bindings for i.MX8qm/qxp pixel combiner.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-4-victor.liu@nxp.com

media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner

This patch adds documentations for RGB666_1X30_CPADLO, RGB888_1X30_CPADLO,
RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp
pixel combiner.  The RGB pixels with padding low per component are
transmitted on a 30-bit input bus(10-bit per component) from a display
controller or a 36-bit output bus(12-bit per component) to a pixel link.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-3-victor.liu@nxp.com

media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner

This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO
and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner.
The RGB pixels with padding low per component are transmitted on a 30-bit
input bus(10-bit per component) from a display controller or a 36-bit
output bus(12-bit per component) to a pixel link.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com

drm/bridge: anx7625: Use DPI bus type

As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI
interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it.

Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com

dt-bindings:drm/bridge:anx7625: add port@0 property

Add 'bus-type' and 'data-lanes' define, bus-type 7 for MIPI DPI
input, others for DSI input.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-3-xji@analogixsemi.com

drm/i915/bios: calculate panel type as per child device index in VBT

Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.

v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]

Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com

drm/i915/display: convert modeset setup to struct drm_i915_private *i915

Pass struct drm_i915_private * instead of struct drm_device *, and
rename dev_priv to i915.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-2-jani.nikula@intel.com

drm/i915/display: split out hw state readout and sanitize

Split out the modeset hardware state readout and sanitize, or state
setup, to a separate file.

Do some drive-by checkpatch fixes while at it.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-1-jani.nikula@intel.com

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/i915/display: Re-add check for low voltage sku for max dp source rate

This reverts commit 73867c8709b5 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.

Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.

Bisection traced it back to this commit, which makes sense given the
issues.

Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.

Fixes: 73867c8709b5 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com

fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters

The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.

To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.

Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100

fbcon: Fix accelerated fbdev scrolling while logo is still shown

There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.

When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.

But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.

So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.

Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100

drm/i915/display: some struct drm_i915_private *i915 conversions

Prefer struct drm_i915_private *i915 over struct drm_device or dev_priv.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1bb84c4fffde5025ddc411148d529381a587e1e1.1655372759.git.jani.nikula@intel.com

drm/i915/display: rename dev_priv -> i915 in crtc state dump

Rename dev_priv to i915 in crtc state dumping code.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c1dafd45757d2de2e3f8404674168f2b1241170.1655372759.git.jani.nikula@intel.com

drm/i915/display: change who adds [] around crtc state dump context string

Add the brackets [] around crtc state dump context string in
intel_crtc_state_dump() so the callers don't have to.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7d671279fb7d99eaf882bcb88c5c1d653755fb1.1655372759.git.jani.nikula@intel.com

drm/i915/display: split out crtc state dump to a separate file

Declutter intel_display.c by splitting out crtc state dumping to a
separate file.

v2: intel_pipe_config_dump -> intel_crtc_state_dump

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f72a5626473692910263671af91e02251ed87eea.1655372759.git.jani.nikula@intel.com

drm/i915/display: split out modeset verification code

Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.

Fix some minor checkpatch issues while at it.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com

drm/i915/mpllb: move mpllb state check to intel_snps_phy.c

Keep the mpllb implementation details together in intel_snps_phy.c. Also
declutter intel_display.c.

v2: intel_mpllb_verify_state -> void intel_mpllb_state_verify (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7340bb0e399aeb2676c4820461187eeb1d4db15.1655372759.git.jani.nikula@intel.com

drm/i915/mpllb: use I915_STATE_WARN() for state mismatch warnings

The pipe_config_mismatch() function is primarily for logging comparison
results.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/167e54e13a9a41c944910a274e79cbfd39d963b1.1655372759.git.jani.nikula@intel.com

drm/i915/dpll: move shared dpll state verification to intel_dpll_mgr.c

Keep the shared dpll implementation details together by moving the dpll
state verification to intel_dpll_mgr.c. Also declutter intel_display.c.

v2: intel_shared_dpll_verify_state -> intel_shared_dpll_state_verify (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85b02186f1269dd374d11db35900130547a5f2c6.1655372759.git.jani.nikula@intel.com

drm/i915/wm: move wm state verification to intel_pm.c

By moving wm state verification to intel_pm.c, we can make a bunch of
functions static, hiding the wm details better. Also declutter
intel_display.c.

v2: intel_wm_state_verify -> intel_wm_verify_state (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a7e3141e87181c07eaddcd9c352b8810550b0ce.1655372759.git.jani.nikula@intel.com

iosys-map: Fix typo in documentation

It's one argument, vaddr_iomem, not 2 (vaddr and _iomem).

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610232130.2865479-3-lucas.demarchi@intel.com

drm/nouveau: Fix spelling typo in comments

Fix spelling typo in comments.

Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_C15AFFD9BBB862C56280A415C336F94C3909@qq.com

drm/i915: Implement w/a 22010492432 for adl-s

adl-s needs the combo PLL DCO fraction w/a as well.
Gets us slightly more accurate clock out of the PLL.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/dp/mst: Read the extended DPCD capabilities during system resume

The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE
from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV
registers are not read subsequently also as required.

Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is
done during connector detection. While at it also fix up the same call
in drm_dp_mst_dump_topology().

Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5292
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614094537.885472-1-imre.deak@intel.com

drm/i915/bios: Introduce panel_bits() and panel_bool()

Abstract the bit extraction from the VBT per-panel bitfields
slightly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Don't parse the DPS panel type when the VBT does not have it

Older VBTs don't have all the stuff we've defined for the
LVDS options block (40). In particular we're currently parsing
the DPS panel type bits even though they may not exist, which
could mean we end up flagging the machine as supporting static
DRRS when the VBT declared no such thing.

We don't actually have a clear idea which VBT versions have
which bits so we rely on the block size instead.

Here's a quick list from my VBT stash:
mgm version 108 -> 4 bytes
alv version 120 -> 4 bytes
cst version 134 -> 14 bytes
pnv version 144 -> 14 bytes
cl  version 142 -> 16 bytes
ctg version 155 -> 24 bytes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Move panel_type stuff out of parse_panel_options()

Parsing the panel_type is a bit special and should be done
before we parse anything else potentially panel-specific from
the VBT. So move it out from parse_panel_options(). It doesn't
neet to be there anyway since it'll do its own LVDS options
block lookup.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove bogus LPT iCLKIP WARN

The WARN shouldn't have been added yet. For the moment the
clock that gets passed here is just what the user has requested
(via the modeline) and may not be exactly what iCLKIP can
generate.

Later on the plan is to change things so that we already get
passed the exact clock here, at which point the WARN should
be reintroduced.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6246
Fixes: 97708335b04d ("drm/i915: Introduce struct iclkip_params")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616095530.15024-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Sanitize underrun reporting before turning off any pipes

Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract intel_sanitize_fifo_underrun_reporting()

Pull the underrun status sanitation into its own helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Do not start connector polling on headless sku

Connector polling is waking up the polled device. Polling
is unnecessary if our device is known to not have display.

Fix this and save some power by disabling starting connector
polling when we are having headless sku. Use information from
opregion.

v2: Move headless sku check into INTEL_DISPLAY_ENABLED macro

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-4-jouni.hogander@intel.com

drm/i915: Do not start connector polling if display is disabled

Currently we are starting connector polling if display is disabled
using disable_display module parameter. Polling is just returning
always "not connected" state. This can be optimized by not starting
polling at all.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-3-jouni.hogander@intel.com

drm/i915/opregion: add function to check if headless sku

Export headless sku bit (bit 13) from opregion->header->pcon as an
interface to check if our device is headless configuration.

This is mainly targeted for hybrid gfx systems. E.g. when display
is not supposed to be connected discrete graphics card it's
opregion can inform this is headless graphics card.

v3: Dummy version is now static inline function
v2: Check also opregion version

Bspec: 53441
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-2-jouni.hogander@intel.com

drm/sun4i: sun8i-hdmi-phy: Group PHY ops functions by generation

Now that the PHY ops are separated, sort them topologically, with the
common sun8i_hdmi_phy_set_polarity helper at the top. No function
contents are changed in this commit.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-7-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Separate A83T and H3 PHY ops

Since the driver already needs to support multiple sets of ops, we can
drop the mid-layer used by the A83T and H3 PHYs. They share only a small
amount of code; factor this out as sun8i_hdmi_phy_set_polarity.

For clarity, this commit keeps the existing function order.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-6-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Support multiple custom PHY ops

The D1 SoC comes with a new custom HDMI PHY, which does not share any
registers with the existing custom PHY. So it needs a new set of ops.
Instead of providing a flag in the variant structure, provide the ops
themselves.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-5-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Used device-managed clocks/resets

Now that the HDMI PHY is using a platform driver, it can use device-
managed resources. Use these, as well as the dev_err_probe helper, to
simplify the probe function and get rid of the remove function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-4-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Use devm_platform_ioremap_resource

The struct resource is not used for anything else, so we can simplify
the code a bit by using the helper function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-3-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Use of_device_get_match_data

Now that the HDMI PHY is using a platform driver, we can use the usual
helper function for getting the variant structure.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-2-samuel@sholland.org

drm/amdgpu/display: fix build when CONFIG_DEBUG_FS is not set

amdgpu_dm_crtc_late_register() is only used when CONFIG_DEBUG_FS
is enabled so make it dependent on that.

Fixes: 4cd79f614b50 ("drm/amd/display: Move connector debugfs to drm")
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lists.freedesktop.org/archives/dri-devel/2022-June/359496.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615210019.28943-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2022-06-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.20:

UAPI Changes:

 * connector: export bpc limits in debugfs

 * dma-buf: Print buffer name in debugfs

Cross-subsystem Changes:

 * dma-buf: Improve dma-fence handling; Cleanups

 * fbdev: Device-unregistering fixes

Core Changes:

 * client: Only use driver-validated modes to avoid blank screen

 * dp-aux: Make probing more reliable; Small fixes

 * edit: CEA data-block iterators; Introduce struct drm_edid; Many cleanups

 * gem: Don't use framebuffer format's non-exising color planes

 * probe-helper: Use 640x480 as DisplayPort fallback; Refactoring

 * scheduler: Don't kill jobs in interrupt context

Driver Changes:

 * amdgpu: Use atomic fence helpers in DM; Fix VRAM address calculation;
   Export CRTC bpc settings via debugfs

 * bridge: Add TI-DLPC3433;  anx7625: Fixes;  fy07024di26a30d: Optional
   GPIO reset;  icn6211: Cleanups;  ldb: Add reg and reg-name properties
   to bindings, Kconfig fixes;  lt9611: Fix display sensing;  lt9611uxc:
   Fixes;  nwl-dsi: Fixes;  ps8640: Cleanups;  st7735r: Fixes;  tc358767:
   DSI/DPI refactoring and DSI-to-eDP support, Fixes; ti-sn65dsi83:
   Fixes;

 * gma500: Cleanup connector I2C handling

 * hyperv: Unify VRAM allocation of Gen1 and Gen2

 * i915: export CRTC bpc settings via debugfs

 * meson: Support YUV422 output; Refcount fixes

 * mgag200: Support damage clipping; Support gamma handling; Protect
   concurrent HW access; Fixes to connector; Store model-specific limits
   in device-info structure; Cleanups

 * nouveau: Fixes and Cleanups

 * panel: Kconfig fixes

 * panfrost: Valhall support

 * r128: Fix bit-shift overflow

 * rockchip: Locking fixes in error path; Minor cleanups

 * ssd130x: Fix built-in linkage

 * ttm: Cleanups

 * udl; Always advertize VGA connector

 * fbdev/vesa: Support COMPILE_TEST

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YqBtumw05JZDEZE2@linux-uq9g

drm/bridge: it6505: Add missing CRYPTO_HASH dependency

The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:

drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com

drm/bridge: anx7625: Zero error variable when panel bridge not present

While parsing the DT, the anx7625 driver checks for the presence of a
panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores
the error pointer and the function returns successfully without first
cleaning that variable. This is an issue since other functions later
check for the presence of a panel bridge by testing the trueness of that
variable.

In order to ensure proper behavior, zero out pdata->panel_bridge before
returning when no panel bridge is found.

Fixes: 9e82ea0fb1df ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com

drm/i915/bios: split ddi port parsing and debug printing

Split ddi port parsing and debug printing to clarify the functional
parts of parse_ddi_port(), which are quite small nowadays.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/34e0dd92b7f7e9076df1f01b542347e599ec6653.1654870175.git.jani.nikula@intel.com

drm/i915/bios: no need to pass i915 to parse_ddi_port()

i915 is available via devdata, grab it there instead of passing.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45c97c93bb9262c08aefa7b4bfe31f3f3481c998.1654870175.git.jani.nikula@intel.com

drm/i915/bios: use dvi and hdmi support helpers

Improve clarity by using the helpers we have.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a0b52593f19a465dc0dd898db5f6bf13537d734.1654870175.git.jani.nikula@intel.com

drm/i915: Skip FDI vs. dotclock sanity check during readout

The VBIOS/GOP may not program the FDI M/n vs. dotclock entirely
consistently. Eg. on a SNB Thinkpad X220 LVDS I see dotclock of
69.286 MHz (the best the DPLL can do) vs. FDI M/N 69.3 MHz
(matches what the EDID actually declares).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Introduce struct iclkip_params

Pull the various iCLKIP parameters into a struct. Later on
we'll reuse this during the state computation to determine
the exact dotclock the hardware will be generating for us.

v2: Don't lose the phaseinc calculation
v3: Drop the misplaced '#include <intel_pch_refclk.h>' from intel_crt.c (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504212109.26369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract intel_crtc_dotclock()

Extract intel_crtc_dotclock() from ddi_dotclock_get(). We'll reuse
this during state computation in order to determine the actual final
dotclcok after the DPLL computation has been done (which may not give
us the exact same port_clock that we fed in).

v2: Add the prototype

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504123350.13235-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

Revert "fbdev: vesafb: Allow to be built if COMPILE_TEST is enabled"

This reverts commit fa0e256450f27a7d85f65c63f05e6897954a1d53. The kernel
test robot reported that attempting to build the vesafb driver fails on
some architectures, because these don't define a `struct screen_info`.

This leads to linking errors, for example on parisc with allyesconfig:

  hppa-linux-ld: drivers/video/fbdev/vesafb.o: in function `vesafb_probe':
>> (.text+0x738): undefined reference to `screen_info'
>> hppa-linux-ld: (.text+0x73c): undefined reference to `screen_info'
   hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
>> (.init.text+0x28): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x30): undefined reference to `screen_info'
   hppa-linux-ld: (.init.text+0x78): undefined reference to `screen_info'

The goal of commit fa0e256450f2 ("fbdev: vesafb: Allow to be built if
COMPILE_TEST is enabled") was to have more build coverage for the driver
but it wrongly assumed that all architectures would define a screen_info.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085450.1341880-1-javierm@redhat.com

drm/msm: Fix convert to drm_of_get_data_lanes_count

Add missing header file into dsi_host.c and encode data-lanes string
directly into the warning message in the driver to avoid build issues
detected by lkp.

Fixes: 185443efa26a ("drm/msm: Convert to drm_of_get_data_lanes_count")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de

drm/probe-helper: abstract .get_modes() connector helper call

Abstract the .get_modes() connector helper call, including the
override/firmware EDID fallback, for clarity.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4de51efc246e4f5bcbf7b84d66bb49aaf7fd974.1654674560.git.jani.nikula@intel.com

drm/edid: add new interfaces around struct drm_edid

Add new functions drm_edid_read(), drm_edid_read_ddc(), and
drm_edid_read_custom() to replace drm_get_edid() and drm_do_get_edid()
for reading the EDID. The transition is expected to happen over a fairly
long time.

Note that the new drm_edid_read*() functions do not do any of the
connector updates anymore. The reading and parsing will be completely
separated from each other.

Add new functions drm_edid_alloc(), drm_edid_dup(), and drm_edid_free()
for allocating and freeing drm_edid containers.

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6532a94cad6a79424f6d1918dbe7b7d607ac03.1654674560.git.jani.nikula@intel.com