Nicolas Dufresne [Thu, 7 May 2020 11:43:30 +0000 (07:43 -0400)]
h264parser: Removed impossible error case
Same as done for H264, this error was trying to catch the case where we had
a start code without any bytes afterward. This will never happen since the
start code scanner only returns a match if there is one byte after start
code (pattern 0x00000100 / mask 0xffffff00). In H264, once byte is sufficient
to identify the NALU.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
Nicolas Dufresne [Thu, 7 May 2020 02:28:34 +0000 (22:28 -0400)]
h264parse: Properly handle 4 bytes start code
This will stop stripping four bytes start code. This was fixed and broken
again as it was causing the a timestamp shift. We now call
gst_base_parse_set_ts_at_offset() with the offset of the first NAL to ensure
that fixing a moderatly broken input stream won't affect the timestamps. We
also fixes the unit test, removing a comment about the stripping behaviour not
being correct.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
Nicolas Dufresne [Thu, 7 May 2020 02:18:12 +0000 (22:18 -0400)]
h265parser: Fix NAL size check for identification
Unlike H264, H265 requires 2 bytes after the start code to allow NAL
identification. This would otherwise report a broken NAL and skip
important data.
Fixes #1287
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
Nicolas Dufresne [Thu, 7 May 2020 02:13:45 +0000 (22:13 -0400)]
h265parser: Removed impossible error case
This error was trying to catch the case where we had a start code without any
bytes afterward. This will never happen since the start code scanner only returns
a match if there is one byte adter start code (pattern 0x00000100 / mask
0xffffff00).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
Xu Guangxin [Wed, 29 Apr 2020 08:19:08 +0000 (16:19 +0800)]
msdk: bufferpool: set alignment to video meta
else gst_video_meta_validate_alignment will report error like
"videometa gstvideometa.c:416:gst_video_meta_validate_alignment: Stride of plane 0 defined in meta (384) is different from the one computed from the alignment (320)"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1224>
Sebastian Dröge [Wed, 6 May 2020 17:04:17 +0000 (20:04 +0300)]
timecodestamper: Unref latency query after usage
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1249>
Sebastian Dröge [Wed, 6 May 2020 08:47:56 +0000 (11:47 +0300)]
musepackdec: Don't fail all queries if no sample rate is known yet
The sample rate is only needed for the POSITION/DURATION queries and we
would otherwise fail important queries like the CAPS query.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/498
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1248>
Luka Blaskovic [Fri, 1 May 2020 05:46:56 +0000 (07:46 +0200)]
opencv: allow compilation against 4.3.x
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1235>
Matthew Waters [Wed, 6 May 2020 05:36:19 +0000 (15:36 +1000)]
webrtc: fix an off-by-one calculating low-threshold
We were not signalling low-threshold when the previous amount was at
exactly the low-threshold mark.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1247>
Matthew Waters [Wed, 6 May 2020 05:35:26 +0000 (15:35 +1000)]
webrtc: fix a slightly racy test
There is no guarantee that the peer data channel has transitioned to
open when we do.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1247>
Matthew Waters [Wed, 6 May 2020 05:49:05 +0000 (15:49 +1000)]
webrtc: remove debugging leftover
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1247>
Matthew Waters [Tue, 5 May 2020 14:30:34 +0000 (00:30 +1000)]
webrtc: always reply to a promise
Otherwise, we defeat the purpose of a promise.
We were not replying when the state was closed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Matthew Waters [Tue, 5 May 2020 14:25:45 +0000 (00:25 +1000)]
webrtc: name threads based on the element name
Makes debugging a busy loop possibly easier
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Matthew Waters [Tue, 5 May 2020 07:15:51 +0000 (17:15 +1000)]
tests/webrtc: fix a data channel leak in a test
test_data_channel_create_after_negotiate overrides the data_channel_data
without ever freeing it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Matthew Waters [Tue, 5 May 2020 07:14:46 +0000 (17:14 +1000)]
webrtc: correctly use the pad template
GstHarness uses this for releasing request pads correctly. Fixes
numerous leaks in the webrtc unit tests.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Matthew Waters [Tue, 5 May 2020 04:35:10 +0000 (14:35 +1000)]
webrtc: Fix a couple of renegotiation races
When negotiating the SDP we should only connect the streams that are
actually mentioned in the SDP. All other streams are not relevant at
this time and would likely be part of a future SDP update. Fixes a
couple of the renegotiation webrtc unit tests.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Matthew Waters [Tue, 5 May 2020 04:33:34 +0000 (14:33 +1000)]
tests/webrtc: move bus thread creation earlier
Fixes a small deadlock race where the bus watch GSource could execute before
the unlock mutex GSource.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Matthew Waters [Mon, 4 May 2020 04:39:45 +0000 (14:39 +1000)]
tests: add libnice to the plugin loading whitelist
Allows webrtcbin to actually unit test some negotiation scenarios.
Without this, only two of the possible 33 tests are being executed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Nicolas Dufresne [Tue, 5 May 2020 16:01:21 +0000 (12:01 -0400)]
v4l2slvp8dec: Flip the meaning of segment_feature_mode
In section 9.3.4 a), segment_feature_mode have 0 for absolute and 1 for delta,
while in 19.2, it says the opposite. But the reference code, which usually
rules over the text state that 1 means absolute:
if (hdr->update_data)
{
hdr->abs = bool_get_bit(bool);
And uses it with that meaning to decide weither to override the existing value
or just add the detla. This fixes multiple decoding issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1245>
Nicolas Dufresne [Mon, 4 May 2020 19:33:39 +0000 (15:33 -0400)]
v4l2slvp8dec: Copy header version
This field was not copied.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1245>
Nicolas Dufresne [Mon, 4 May 2020 18:54:23 +0000 (14:54 -0400)]
v4l2slvp8dec: Add debugging for reference frames
This simply trace the frame number of the references used for decoding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1245>
Nicolas Dufresne [Mon, 4 May 2020 18:52:45 +0000 (14:52 -0400)]
v4l2slvp8dec: Ensure width/height is always set
Our parser strictly read the bitstream. As it's known from DXVA that always
having a valid width/height might be needed, use the cached width/height
instead of the value from the parser. This didn't impact Hantro driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1245>
Nicolas Dufresne [Mon, 4 May 2020 18:52:02 +0000 (14:52 -0400)]
v4l2slvp8dec: Fix debug category name
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1245>
Edward Hervey [Tue, 5 May 2020 15:40:51 +0000 (17:40 +0200)]
iqa: Fix all leaks in error path
CID #1456049
CID #1456080
CID #1456083
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1244>
He Junyan [Sat, 28 Mar 2020 16:45:47 +0000 (00:45 +0800)]
test: h265parser: Add a test case for SCC extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1146>
He Junyan [Sat, 28 Mar 2020 06:46:13 +0000 (14:46 +0800)]
libs: parser: h265: Add SCC extension support.
Add support for screen content coding extensions profiles.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1146>
Seungha Yang [Tue, 5 May 2020 16:25:04 +0000 (01:25 +0900)]
d3d11vp8dec: Remove useless assign operation
It's already been done in the line just above.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1246>
Edward Hervey [Tue, 5 May 2020 14:07:40 +0000 (16:07 +0200)]
check: Fix dash mpd unit test
Unexpected critical/warning: g_object_set_is_valid_property: object class 'GstMPDBaseURLNode' has no property named 'service location'
Stack trace:
gst_debug_get_stack_trace (gstinfo.c:3021)
gst_check_log_critical_func (gstcheck.c:281)
g_logv (gmessages.c:1350)
g_log (gmessages.c:1415)
g_object_set_valist (gobject.c:2327)
gst_mpd_client_add_baseurl_node (gstmpdclient.c:3142)
dash_mpdparser_check_mpd_client_set_methods (dash_mpd.c:6192)
srunner_run_tagged (check_run.c:465)
gst_check_run_suite (gstcheck.c:1086)
main (dash_mpd.c:6521)
__libc_start_main (libc-start.c:308)
_start (/home/bilboed/work/devel/gst-build/build/subprojects/gst-plugins-bad/tests/check/elements_dash_mpd:0x40554a)
Seungha Yang [Tue, 5 May 2020 11:32:53 +0000 (20:32 +0900)]
d3d11window: Fix processor output view resource leak
Because this object holds reference to native d3d11 device handle internally,
related native d3d11 objects would be leaked as well.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1243>
Matthew Waters [Fri, 1 May 2020 04:19:56 +0000 (14:19 +1000)]
sctp: enable usrsctp debug when supported
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1234>
Tim-Philipp Müller [Sun, 3 May 2020 10:05:32 +0000 (10:05 +0000)]
tests: curlhttpsrc: fix compiler warning on raspbian
tests/check/elements/curlhttpsrc.c:142:14: warning: format ‘%lu’
expects argument of type ‘long unsigned int’, but argument 8 has
type ‘gsize’ {aka ‘unsigned int’}
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1239>
Tim-Philipp Müller [Sun, 3 May 2020 09:59:45 +0000 (09:59 +0000)]
nvcodec: fix compiler warning in certain setups
Fixes gstnvh264dec.c:648:12: warning: unused variable ‘ret’
compiler warning on raspbian where HAVE_NVCODEC_GST_GL is
not defined.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1239>
Ederson de Souza [Fri, 3 Apr 2020 17:41:44 +0000 (10:41 -0700)]
avtpsink: Log that AVTPDU transmission failure is due lateness
As ENOBUFS is not really clear about what is going on, let's check
socket error queue to see if packets are being dropped due being late.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
Ederson de Souza [Fri, 3 Apr 2020 17:41:31 +0000 (10:41 -0700)]
avtpsink: Accept buffers that fall out of segment
Proper calculate running time for buffers that are out of current
segment and try to honor them.
A typical case is for AVTP packets coming from avtpcvfpay element, as
those may have DTS that falls out of segment (which is about PTS).
By using gst_segment_to_running_time_full(), avtpsink can properly
calculate when to transmit those buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
Ederson de Souza [Fri, 3 Apr 2020 17:41:04 +0000 (10:41 -0700)]
avtpcvfpay: Warn about timestamp issues on non-flushing seek
Seek events will cause new segments to be sent to avtpcvfpay, and for
flushing seeks, a pipeline running time reset. This running time
reset, which effectively changes pipeline base time, will cause
avtpcvfpay element to generate incorrect DTS for the initial set of
buffers sent after FLUSH_STOP.
This happens due the fact that base time change happens only when the
sink gets the first buffer after the FLUSH_STOP - so avtpcvfpay used
the wrong base time to do its calculations.
However, if the pipeline is paused before the seek, sink will update
base time when pipeline state goes to PLAYING again, before avtpcvfpay
gets the first buffers after the flush. Then avtpcvfpay element will be
able to normally calculate DTS for the outgoing packets.
This patch simply adds a warning message in case a flushing seek is
performed on a playing pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
Ederson de Souza [Fri, 3 Apr 2020 17:40:43 +0000 (10:40 -0700)]
avtpcvfpay: Ensure NAL fragments are transmitted following stream specs
TSN streams are expected to send packets to the network in a well
defined "pace", which is arbitrarily defined for each stream. This pace
is defined by the "measurement interval" property of a stream.
When the AVTP CVF payloader element - avtpcvfpay - fragments a video
frame that is too big to be sent to the network, it currently defines
that all fragments should be transmitted at the same time (via DTS
property of GstBuffers generated, as sink will use those to time the
transmission of the AVTPDU). This doesn't comply with stream definition,
which also has a limit on how many packets can be sent on a given
measurement interval.
This patch solves that by spreading in time the DTS of the GstBuffers
containing the AVTPDUs. Two new properties, "measurement-interval" and
"max-interval-frames", added to avptcvfpay element so that it knows
stream measurement interval and how many AVTPDUs it can send on any of
them. More details on the method used to proper spread DTS/PTS according
to measurement interval can be found in a code commentary inside this patch.
Tests also added for the new property and behaviour.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
Georg Ottinger [Mon, 24 Feb 2020 14:38:39 +0000 (22:38 +0800)]
libs: parser: Adds AV1 parser.
This is the first version of AV1 parser implementation in GStreamer.
A test file is also provied with several test cases. It contains a
test sequence taken from the aom testdata set, with one key and one
inter-frame. The same test sequence has been reencoded to annexb.
testdata is taken from aom testdata (and reencoded for annexb) as well
as handcrafted testcases. Once reference testdata is available, the
testing could be imporved aswell.
Co-author: He Junyan <junyan.he@hotmail.com>
Co-author: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/785>
Tim-Philipp Müller [Fri, 1 May 2020 13:43:55 +0000 (14:43 +0100)]
autoconvert: fix compiler warnings with g_atomic on recent GLib versions
The volatile is not needed here and causes compiler warnings
with newer GLib versions.
gstautoconvert.c: In function ‘gst_auto_convert_dispose’ (and elsewhere):
glib/gatomic.h:108:3: warning: initialization discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
gstautoconvert.c:224:24: note: in expansion of macro ‘g_atomic_pointer_get’
224 | GList *factories = g_atomic_pointer_get (&autoconvert->factories);
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1237>
Matthew Waters [Thu, 30 Apr 2020 15:17:08 +0000 (01:17 +1000)]
webrtcbin: also mark data channel transports as active
Fixes negotiation of a bundled sdp with only a data channel.
Without marking the transport as active, we would never unblock the
transportreceivebin and thus no data would ever reach us.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1231>
Matthew Waters [Thu, 30 Apr 2020 14:47:53 +0000 (00:47 +1000)]
webrtcbin: fix bundle none case with remote offer bundling
If the remote is bundling, but we are not and remote is offering.
we cannot put the remote media sections into a bundled transport as that
is not how we are going to respond.
This specific failure case was that the remote ICE credentials were
never set on the ice stream and so ice connectivity would fail.
Technically, this whole bunde-policy=none handling should be removed
eventually when we implement bundle-policy=balanced. Until such time,
we have this workaround.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1231>
Vedang Patel [Fri, 27 Sep 2019 01:12:36 +0000 (18:12 -0700)]
tests: add tests for functions in gstavtpcrfutil.c
This adds tests for the helper functions in ext/avtp/gstavtpcrfutils.c
Vedang Patel [Fri, 27 Sep 2019 01:11:42 +0000 (18:11 -0700)]
tests: Add the tests for CRF Checker element
This adds tests to ensure the avtpcrfchecker element validates and drops the
packets which do not match the CRF Synchronization criteria.
Vedang Patel [Mon, 14 Oct 2019 20:56:49 +0000 (13:56 -0700)]
tests: Add tests for GstAvtpCrfBase base class.
This adds tests which test the functions which do not call any external
syscalls and the properties.
Vedang Patel [Mon, 14 Oct 2019 20:56:36 +0000 (13:56 -0700)]
tests: Add tests for CRF Synchronizer element
This adds tests to validate whether the avtpcrfsync element applies the
adjustment correctly.
Also, the infrastructure to include additional source files while compiling
is added. This change is exactly the same as the one in gst-plugins-good.
Vedang Patel [Mon, 14 Oct 2019 20:55:57 +0000 (13:55 -0700)]
avtp: Introduce the CRF Check element
This commit introduces the AVTP Clock Reference Format (CRF) Checker
element. This element re-uses the GstAvtpCrfBase class introduced along
with the CRF Synchronizer element.
This element will typically be used along with the avtpsrc element to
ensure that the AVTP timestamp (and H264 timestamp in case of CVF-H264
packets) is "aligned" with the incoming CRF stream. Here, "aligned" means
that the timestamp value should be within 25% of the period of the media
clock recovered from the CRF stream.
The user can also set an option (drop-invalid) in order to drop any packet
whose timestamp is not within the thresholds of the incoming CRF stream.
Vedang Patel [Thu, 6 Feb 2020 00:17:39 +0000 (16:17 -0800)]
avtp: Introduce the CRF Sync Element
This commit introduces the AVTP Clock Reference Format (CRF) Synchronizer
element. This element implements the AVTP CRF Listener as described in IEEE
1722-2016 Section 10.
CRF is useful in synchronizing events within different systems by
distributing a common clock. This is useful in a scenario where there are
multiple talkers who are sending data to a single listener which is
processing that data. E.g. CCTV cameras on a network sending AVTP video
streams to a base station to display on the same screen.
It is assumed that all the systems are already time-synchronized with each
other. So, the AVTP Talker essentially adjusts the AVTP Presentation Time
so it's phase-locked with the reference clock provided by the CRF stream.
There are 2 different roles of systems which participate in CRF data
exchange. A system can either be a CRF Talker, which samples it's own
clock and generates a stream of timestamps to transmit over the network, or
a CRF Listener, the system which receives the generated timestamps and
recovers the media clock from the timestamps. It then adjusts it's own
clock to align with recovered media clock. The timestamps generated by the
talker may not be continuous and the listener might have to interpolate
some timestamps to recover the media clock. The number of timestamps to
interpolate is mentioned in the CRF stream AVTPDU (Refer IEEE 1722-2016
Section 10.4 for AVTPDU structure). Only CRF Listener has been implemented
in this commit.
The CRF Sync element will create a separate thread to listen for the CRF
stream. This thread will calculate and store the average period of the
recovered media clock. The pipeline thread will use this stored period
along with the first timestamp of the latest CRF AVTPDU received to
calculate adjustment for timestamps in the audio/video streams. In case of
CRF AVTPDUs with single timestamp, two consecutive CRF AVTPDUs will be used
to figure out the average period of the recovered media clock.
In case of H264 streams, both AVTP timestamp and H264 timestamp will be
adjusted.
In the future commits, another "CRF Checker" element will be introduced
which will validate the timestamps on the AVTP Listener side. Which is why
a lot of code has been implemented as part of the gstcrfbase class.
Ederson de Souza [Fri, 13 Dec 2019 19:28:08 +0000 (11:28 -0800)]
clockselect: Add TAI clock support
Via new value for property clock-id, "tai", it's possible to use
GST_CLOCK_TYPE_TAI as pipeline clock.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1009>
Ederson de Souza [Mon, 27 Jan 2020 23:16:12 +0000 (15:16 -0800)]
clockselect: Remove non-sense comment
Commentary appears to assume `gst_harness_find_element` return value was
"transfer none", but it is not the case. So, element must be unrefed
before the end.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1009>
krivoguzovVlad [Thu, 23 Jan 2020 15:57:34 +0000 (15:57 +0000)]
Update gstsrtobject.c
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/999>
Olivier Crête [Tue, 30 Jul 2019 21:09:55 +0000 (17:09 -0400)]
ristrtpdeext: Expose the largest sequence number received
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Wed, 18 Mar 2020 21:34:47 +0000 (17:34 -0400)]
ristrtpdeext: Update RTP header extension packet to latest spec
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Wed, 18 Mar 2020 21:14:14 +0000 (17:14 -0400)]
ristrtpext: Update RTP header extension packet to latest spec
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Wed, 31 Jul 2019 16:01:07 +0000 (12:01 -0400)]
rist: Document main profile support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Mon, 29 Jul 2019 21:53:21 +0000 (17:53 -0400)]
ristsrc: Add ristrtpdeext to the pipeline
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Mon, 29 Jul 2019 17:58:37 +0000 (13:58 -0400)]
ristsink: Add ristrtpext to sink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Fri, 26 Jul 2019 21:57:40 +0000 (17:57 -0400)]
ristsink: Receive RIST seqnum ext and feed it to rtxsend
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Fri, 26 Jul 2019 21:43:57 +0000 (17:43 -0400)]
ristsink: Pass the session id to the on-app-rtcp callback
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Fri, 26 Jul 2019 21:14:14 +0000 (17:14 -0400)]
ristrtxsend: Use externally given seqnum extension when available
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Fri, 26 Jul 2019 20:50:21 +0000 (16:50 -0400)]
ristrtxsend: Store sent packets with extended seqnum
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Fri, 26 Jul 2019 20:49:51 +0000 (16:49 -0400)]
rist: Factor our seqnum extension code
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Wed, 24 Jul 2019 21:32:07 +0000 (17:32 -0400)]
rist: Add test for rtp ext code
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Tue, 23 Jul 2019 21:27:06 +0000 (17:27 -0400)]
rist: Drop packets that are more than G_MAXINT16 seqnum late
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Tue, 23 Jul 2019 21:26:16 +0000 (17:26 -0400)]
rist: Insert RTP seqnum extension header
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Fri, 12 Jul 2019 15:43:26 +0000 (11:43 -0400)]
rist: Add element to remove the header extension
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Olivier Crête [Thu, 11 Jul 2019 22:53:00 +0000 (18:53 -0400)]
rist: Add element that inserts the RTP header extension
Currently can suppress the TS null packets, but can't insert
the seqnum extension yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1153>
Seungha Yang [Thu, 30 Apr 2020 16:51:10 +0000 (01:51 +0900)]
h264decoder: Allow frame gap even if it's not allowed by SPS
It's most likely the case where some frames were dropped for some reason
(e.g., broken stream, network loss or so). However, decoder might be able to
decode following frames even if some frames are visually broken.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1232>
Matthew Waters [Wed, 29 Apr 2020 12:01:32 +0000 (22:01 +1000)]
webrtcbin: only start gathering on local descriptions
If we are in a state where we are answering, we would start gathering
when the offer is set which is incorrect for at least two reasons.
1. Sending ICE candidates before sending an answer is a hard error in
all of the major browsers and will fail the negotiation.
2. If libnice ever adds the username fragment to the candidate for
ice-restart hardening, the ice username and fragment would be
incorrect.
JSEP also hints that the right call flow is to only start gathering when
a local description is set in 4.1.9 setLocalDescription
"This API indirectly controls the candidate gathering process."
as well as hints throughout other sections.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1226>
Seungha Yang [Wed, 29 Apr 2020 10:42:05 +0000 (19:42 +0900)]
webrtc: Correct symbol visibility to fix build warning on Windows
GstWebRTCDataChannel is fully internal of plugin
webrtcdatachannel.c(50): warning C4273: 'gst_webrtc_data_channel_get_type': inconsistent dll linkage
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1225>
Thibault Saunier [Wed, 29 Apr 2020 19:12:36 +0000 (15:12 -0400)]
lv2: Namespace global variables and explicitly make them private
And fix a LV2_PORT_GROUPS__rearLeft/LV2_PORT_GROUPS__rearRight typo
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1125>
Debarshi Ray [Fri, 20 Mar 2020 14:49:06 +0000 (15:49 +0100)]
lv2: Make it build with -fno-common
GCC 10 defaults to -fno-common. This means that global variables shared
across multiple translation units should be declared as 'extern' in
header files and defined in exactly one C file. See:
https://gcc.gnu.org/gcc-10/porting_to.html
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1125
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1125>
Seungha Yang [Wed, 29 Apr 2020 17:41:07 +0000 (02:41 +0900)]
d3d11h264dec: Rearrange the order of supported profiles in caps
constrained-baseline profile is much preferred than baseline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1229>
Seungha Yang [Wed, 29 Apr 2020 17:25:35 +0000 (02:25 +0900)]
nvh264sldec: Allow constrained-baseline and baseline profiles
Like d3d11h264dec, we need to relax the condition for profiles of nvh264sldec
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1228>
Seungha Yang [Thu, 23 Apr 2020 14:25:21 +0000 (23:25 +0900)]
d3d11h264dec: Add constrained-baseline and baseline profile
Both profiles are expected to be supported profile by DXVA hardware
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1212>
Nicolas Dufresne [Tue, 28 Apr 2020 00:26:54 +0000 (20:26 -0400)]
v4l2codecs: Factor out plugin registration
This introduce a common place for generic functions and factor out the plugin
registration code. This code is nearly identical between implementation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1216>
Nicolas Dufresne [Tue, 28 Apr 2020 00:18:52 +0000 (20:18 -0400)]
v4l2decoder: Relax width/height return value check
The driver adjust the width/height to coded size. This was not an issue for
H264, as the coded size is in the bitstream, but is an issue with VP8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1216>
Nicolas Dufresne [Fri, 24 Apr 2020 20:15:25 +0000 (16:15 -0400)]
v4l2codecs: Add VP8 decoder
This is derived from the H264 decoder, some boiler plate will be factored out
in the following commits.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1216>
Joshua M. Doe [Tue, 28 Apr 2020 18:55:00 +0000 (14:55 -0400)]
mfvideosrc: add GRAY16_LE format support
FOURCC "Y16 " is used by FLIR Boson USB Video Class (UVC) camera
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1222>
Seungha Yang [Sun, 26 Apr 2020 13:37:12 +0000 (22:37 +0900)]
d3d11device: Add fallback for device creation
D3D11_CREATE_DEVICE_DEBUG flag will be used while creating d3d11 device
to activate debug layer. However, if system doesn't support the
debug layer for some reason, we should try to create d3d11 device
without the flag. Debug layer should be optional for device creation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1217>
Seungha Yang [Tue, 28 Apr 2020 10:58:53 +0000 (19:58 +0900)]
tests: mfvideosrc: Add unit test
Simple test for reuse scenario
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/760>
Seungha Yang [Tue, 21 Apr 2020 11:49:38 +0000 (20:49 +0900)]
mediafoundation: Disable querying supprted maximum resolution
Initializing MFT for checking supported maximum resolution is too
slow.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/760>
Seungha Yang [Tue, 7 Jan 2020 08:12:17 +0000 (17:12 +0900)]
mediafoundation: Add h265 encoder
Add Media Foundation HEVC encoder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/760>
Seungha Yang [Tue, 7 Jan 2020 08:45:22 +0000 (17:45 +0900)]
mediafoundation: Add h264 encoder
Add Media Foundation h264 encoder. If hardware encoders are available
on system, they will have higher rank than software encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/760>
Seungha Yang [Mon, 7 Oct 2019 12:49:26 +0000 (21:49 +0900)]
mediafoundation: Introduce Microsoft Media Foundation plugin
The Microsoft Media Foundation (MF) is the successor of DirectShow.
This commit includes two kinds of video capture implementation,
one uses IMFSourceReader interface which is available since Windows Vista
and the other is based on IMFCaptureEngine interface which is available
since Windows 8.
Note that this new video source element cannot be used in UWP app
for now, since device activation using those APIs are not allowed by MS.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/760>
He Junyan [Sun, 12 Apr 2020 15:52:28 +0000 (23:52 +0800)]
test: h265parser: Add check for high throughput scc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
He Junyan [Sun, 12 Apr 2020 15:39:07 +0000 (23:39 +0800)]
libs: h265parser: Add High throughput scc extensions profiles' IDC.
It is compitable with scc and we use scc's function to identify it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
He Junyan [Sun, 12 Apr 2020 14:21:01 +0000 (22:21 +0800)]
test: h265parser: Add more check or h265 extensions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
He Junyan [Sat, 11 Apr 2020 08:39:03 +0000 (16:39 +0800)]
libs: h265parser: select extension profile by profile idc.
the old manner does not consider the profile idc. The profile idc should
play an more important role in recognizing the profile than the other
information. And there is no need to mix profiles of different extensions
together to find the closest profile when the bits stream is not standard,
different extensions support different features and should not be mixed.
The correct way should be recognize the extension category by profile idc
firstly, and then find the closest profile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
He Junyan [Thu, 19 Mar 2020 15:50:39 +0000 (23:50 +0800)]
libs: h265parser: rename the FormatRangeExtensionProfile
FormatRangeExtensionProfile declares the common bits used for not
only format range extensions profiles, but also for several different
h265 extension profiles, such as high throughput, screen content
coding extensions, etc. And So the old name is not proper.
We also rename the get_h265_extension_profile function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
He Junyan [Fri, 20 Mar 2020 08:41:16 +0000 (16:41 +0800)]
libs: h265parser: Fix a bug for getting extension profile.
We should use the traget ExtensionProfile's IDC to check the
profile_compatibility_flag, rather than the profile_idc in the
stream. The old profile_compatibility_flag check always return
true. This causes that profiles with same constraint flags but
different profile_idc can't be recognized correctly. For example,
the screen-extended-main-444 profile is always be recognized as
the high-throughput-444 profile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
Seungha Yang [Fri, 24 Apr 2020 11:56:17 +0000 (20:56 +0900)]
h264decoder: Perform low-latency outputting only for live pipeline
Frequent outputting might drop throughput-wise performance.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1211>
Seungha Yang [Thu, 23 Apr 2020 10:47:09 +0000 (19:47 +0900)]
h264decoder: Output decoded pictures as soon as possible
In case of IDR, any previously decoded pictures must be drained
before the IDR and POC of IDR should be zero. So we can output
IDR immediately. Also, when POC of current picture is expected to be
the next output POC, decoder can output the picture as well
without waiting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1211>
Nicolas Dufresne [Mon, 27 Apr 2020 21:02:17 +0000 (17:02 -0400)]
d3d11vp8dec: Remove unused parameters
Minor cleanup removing unused picture parameters in two internal functions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1221>
Mathieu Duponchelle [Mon, 27 Apr 2020 22:29:52 +0000 (00:29 +0200)]
gsth265parser.h: escape link-like syntax in doc
Seppo Yli-Olli [Mon, 27 Apr 2020 08:43:57 +0000 (11:43 +0300)]
openh264: memcmp return value 0 means match
Commit
e2aa76db79328b7f61536dd19d0373cf920395ad introduced version
check guard for OpenH264 binary. There was a boolean error in
memcmp so matching OpenH264 was erroneously rejected.
Fixes #1278
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1219>
Víctor Manuel Jáquez Leal [Sun, 26 Apr 2020 11:47:27 +0000 (13:47 +0200)]
codecs: fix gir generation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1218>
Seungha Yang [Wed, 22 Apr 2020 05:57:12 +0000 (14:57 +0900)]
nvcodec: Add suppport for environment based primary h264 decoder implementation
Introduce GST_USE_NV_STATELESS_CODEC environment to allow user to select
primary nvidia decoder implementation. In case the environment
GST_USE_NV_STATELESS_CODEC=h264 was set, old nvidia h264 decoder element
will not be registered. Instead, both nvh264dec and nvh264sldec
factory name will create gstcodecs based new nvidia h264 decoder element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1198>
Seungha Yang [Thu, 16 Apr 2020 14:27:31 +0000 (23:27 +0900)]
nvcodec: Add H264 stateless codec implementation
Introduce GstH264Decoder based Nvidia H.264 decoder element.
Similar the element factory name of to v4l2 stateless codec,
this element can be configured with factory name "gstnvh264sldec".
Note that "sl" in the name stands for "stateless"
For now, existing nvh264dec covers more profile and formats
(e.g., interlaced stream) than this implementation.
However, this implementation allows us to control lower level
parameters such as decoded picture buffer management and therefore
we can get a chance to improve performance in terms of latency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1198>
Mathieu Duponchelle [Wed, 22 Apr 2020 14:53:00 +0000 (16:53 +0200)]
cccombiner: don't drop buffers on video timestamp discontinuities
If we receive video buffers with non-perfect timestamps, the
caption buffers' timestamps might fall in the interval between
the end of one video buffer and the start of the next one.
Make our criteria for dropping that the caption buffer has
a timestamp older than the end of the previous video buffer,
not older than the start of the new one, unless of course
this is the first video buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1207>
Mathieu Duponchelle [Wed, 22 Apr 2020 14:51:08 +0000 (16:51 +0200)]
cccombiner: handle gap buffers adequately
- Don't try to map them as actual CC data, that was raising
a critical
- Consume video buffers up to the end of the gap
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1207>
Seungha Yang [Thu, 23 Apr 2020 16:56:57 +0000 (01:56 +0900)]
v4l2slh264dec: Support avc and avc3 formats
h264decoder baseclass provides parsed sps/pps (from codec data) for
subclass. Also, since current implementation is putting start code prefix
manually, the format of stream should not be matter for subclass.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1214>