drm/bridge: ti-sn65dsi83: Allow GPIO operations to sleep

There is no need to require non-sleeping GPIO access. Silence the
WARN_ON() if GPIO is using e.g. I2C expanders.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-2-alexander.stein@ew.tq-group.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: ti-sn65dsi83: add more dev_err_probe

Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER
might have several causes, these messages help finding the origin.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-1-alexander.stein@ew.tq-group.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation

Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.

Tested-by: Jiri Vanek <jirivanek1@gmail.com>
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-3-jirivanek1@gmail.com

drm/bridge/tc358775: Return before displaying inappropriate error message

Function for reading from i2c device register displays error message even
if reading ends correctly. Add return to avoid falling through into
the fail label.

Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-2-jirivanek1@gmail.com

MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs

Add myself as the maintainer of DRM bridge drivers for i.MX SoCs.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-15-victor.liu@nxp.com

dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding

This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-14-victor.liu@nxp.com

drm/bridge: imx: Add LDB support for i.MX8qm

This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper.  The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards.  The two channels can be used
simultaneously, either in dual mode or split mode.  In dual mode, the
two channels output identical data.  In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels.  This patch supports the
LDB single mode and split mode.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com

drm/bridge: imx: Add LDB support for i.MX8qxp

This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper.  The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards.  The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display.  The channel indexes have to be
different.  Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge binding

This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB).

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-11-victor.liu@nxp.com

drm/bridge: imx: Add LDB driver helper support

This patch adds a helper to support LDB drm bridge drivers for
i.MX SoCs.  Helper functions supported by this helper should
implement common logics for all LDB modules embedded in i.MX SoCs.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-10-victor.liu@nxp.com

drm/bridge: imx: Add i.MX8qxp pixel link to DPI support

This patch adds a drm bridge driver for i.MX8qxp pixel link to display
pixel interface(PXL2DPI).  The PXL2DPI interfaces the pixel link 36-bit
data output and the DSI controller’s MIPI-DPI 24-bit data input, and
inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap
the pixel color codings between those modules. The PXL2DPI is purely
combinatorial.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-9-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding

This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI).

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-8-victor.liu@nxp.com

drm/bridge: imx: Add i.MX8qm/qxp display pixel link support

This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link.
The pixel link forms a standard asynchronous linkage between
pixel sources(display controller or camera module) and pixel
consumers(imaging or displays).  It consists of two distinct
functions, a pixel transfer function and a control interface.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-7-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link binding

This patch adds bindings for i.MX8qm/qxp display pixel link.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-6-victor.liu@nxp.com

drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support

This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens.  The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel.  For now, the driver only supports
the bypass mode.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com

dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding

This patch adds bindings for i.MX8qm/qxp pixel combiner.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-4-victor.liu@nxp.com

media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner

This patch adds documentations for RGB666_1X30_CPADLO, RGB888_1X30_CPADLO,
RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp
pixel combiner.  The RGB pixels with padding low per component are
transmitted on a 30-bit input bus(10-bit per component) from a display
controller or a 36-bit output bus(12-bit per component) to a pixel link.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-3-victor.liu@nxp.com

media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner

This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO
and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner.
The RGB pixels with padding low per component are transmitted on a 30-bit
input bus(10-bit per component) from a display controller or a 36-bit
output bus(12-bit per component) to a pixel link.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com

drm/bridge: anx7625: Use DPI bus type

As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI
interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it.

Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com

dt-bindings:drm/bridge:anx7625: add port@0 property

Add 'bus-type' and 'data-lanes' define, bus-type 7 for MIPI DPI
input, others for DSI input.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-3-xji@analogixsemi.com

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters

The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.

To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.

Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100

fbcon: Fix accelerated fbdev scrolling while logo is still shown

There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.

When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.

But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.

So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.

Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100

iosys-map: Fix typo in documentation

It's one argument, vaddr_iomem, not 2 (vaddr and _iomem).

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610232130.2865479-3-lucas.demarchi@intel.com

drm/nouveau: Fix spelling typo in comments

Fix spelling typo in comments.

Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_C15AFFD9BBB862C56280A415C336F94C3909@qq.com

drm/dp/mst: Read the extended DPCD capabilities during system resume

The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE
from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV
registers are not read subsequently also as required.

Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is
done during connector detection. While at it also fix up the same call
in drm_dp_mst_dump_topology().

Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5292
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614094537.885472-1-imre.deak@intel.com

drm/sun4i: sun8i-hdmi-phy: Group PHY ops functions by generation

Now that the PHY ops are separated, sort them topologically, with the
common sun8i_hdmi_phy_set_polarity helper at the top. No function
contents are changed in this commit.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-7-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Separate A83T and H3 PHY ops

Since the driver already needs to support multiple sets of ops, we can
drop the mid-layer used by the A83T and H3 PHYs. They share only a small
amount of code; factor this out as sun8i_hdmi_phy_set_polarity.

For clarity, this commit keeps the existing function order.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-6-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Support multiple custom PHY ops

The D1 SoC comes with a new custom HDMI PHY, which does not share any
registers with the existing custom PHY. So it needs a new set of ops.
Instead of providing a flag in the variant structure, provide the ops
themselves.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-5-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Used device-managed clocks/resets

Now that the HDMI PHY is using a platform driver, it can use device-
managed resources. Use these, as well as the dev_err_probe helper, to
simplify the probe function and get rid of the remove function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-4-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Use devm_platform_ioremap_resource

The struct resource is not used for anything else, so we can simplify
the code a bit by using the helper function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-3-samuel@sholland.org

drm/sun4i: sun8i-hdmi-phy: Use of_device_get_match_data

Now that the HDMI PHY is using a platform driver, we can use the usual
helper function for getting the variant structure.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-2-samuel@sholland.org

drm/amdgpu/display: fix build when CONFIG_DEBUG_FS is not set

amdgpu_dm_crtc_late_register() is only used when CONFIG_DEBUG_FS
is enabled so make it dependent on that.

Fixes: 4cd79f614b50 ("drm/amd/display: Move connector debugfs to drm")
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lists.freedesktop.org/archives/dri-devel/2022-June/359496.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615210019.28943-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2022-06-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.20:

UAPI Changes:

 * connector: export bpc limits in debugfs

 * dma-buf: Print buffer name in debugfs

Cross-subsystem Changes:

 * dma-buf: Improve dma-fence handling; Cleanups

 * fbdev: Device-unregistering fixes

Core Changes:

 * client: Only use driver-validated modes to avoid blank screen

 * dp-aux: Make probing more reliable; Small fixes

 * edit: CEA data-block iterators; Introduce struct drm_edid; Many cleanups

 * gem: Don't use framebuffer format's non-exising color planes

 * probe-helper: Use 640x480 as DisplayPort fallback; Refactoring

 * scheduler: Don't kill jobs in interrupt context

Driver Changes:

 * amdgpu: Use atomic fence helpers in DM; Fix VRAM address calculation;
   Export CRTC bpc settings via debugfs

 * bridge: Add TI-DLPC3433;  anx7625: Fixes;  fy07024di26a30d: Optional
   GPIO reset;  icn6211: Cleanups;  ldb: Add reg and reg-name properties
   to bindings, Kconfig fixes;  lt9611: Fix display sensing;  lt9611uxc:
   Fixes;  nwl-dsi: Fixes;  ps8640: Cleanups;  st7735r: Fixes;  tc358767:
   DSI/DPI refactoring and DSI-to-eDP support, Fixes; ti-sn65dsi83:
   Fixes;

 * gma500: Cleanup connector I2C handling

 * hyperv: Unify VRAM allocation of Gen1 and Gen2

 * i915: export CRTC bpc settings via debugfs

 * meson: Support YUV422 output; Refcount fixes

 * mgag200: Support damage clipping; Support gamma handling; Protect
   concurrent HW access; Fixes to connector; Store model-specific limits
   in device-info structure; Cleanups

 * nouveau: Fixes and Cleanups

 * panel: Kconfig fixes

 * panfrost: Valhall support

 * r128: Fix bit-shift overflow

 * rockchip: Locking fixes in error path; Minor cleanups

 * ssd130x: Fix built-in linkage

 * ttm: Cleanups

 * udl; Always advertize VGA connector

 * fbdev/vesa: Support COMPILE_TEST

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YqBtumw05JZDEZE2@linux-uq9g

drm/bridge: it6505: Add missing CRYPTO_HASH dependency

The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:

drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com

drm/bridge: anx7625: Zero error variable when panel bridge not present

While parsing the DT, the anx7625 driver checks for the presence of a
panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores
the error pointer and the function returns successfully without first
cleaning that variable. This is an issue since other functions later
check for the presence of a panel bridge by testing the trueness of that
variable.

In order to ensure proper behavior, zero out pdata->panel_bridge before
returning when no panel bridge is found.

Fixes: 9e82ea0fb1df ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com

Revert "fbdev: vesafb: Allow to be built if COMPILE_TEST is enabled"

This reverts commit fa0e256450f27a7d85f65c63f05e6897954a1d53. The kernel
test robot reported that attempting to build the vesafb driver fails on
some architectures, because these don't define a `struct screen_info`.

This leads to linking errors, for example on parisc with allyesconfig:

  hppa-linux-ld: drivers/video/fbdev/vesafb.o: in function `vesafb_probe':
>> (.text+0x738): undefined reference to `screen_info'
>> hppa-linux-ld: (.text+0x73c): undefined reference to `screen_info'
   hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
>> (.init.text+0x28): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x30): undefined reference to `screen_info'
   hppa-linux-ld: (.init.text+0x78): undefined reference to `screen_info'

The goal of commit fa0e256450f2 ("fbdev: vesafb: Allow to be built if
COMPILE_TEST is enabled") was to have more build coverage for the driver
but it wrongly assumed that all architectures would define a screen_info.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085450.1341880-1-javierm@redhat.com

drm/msm: Fix convert to drm_of_get_data_lanes_count

Add missing header file into dsi_host.c and encode data-lanes string
directly into the warning message in the driver to avoid build issues
detected by lkp.

Fixes: 185443efa26a ("drm/msm: Convert to drm_of_get_data_lanes_count")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de

drm/probe-helper: abstract .get_modes() connector helper call

Abstract the .get_modes() connector helper call, including the
override/firmware EDID fallback, for clarity.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4de51efc246e4f5bcbf7b84d66bb49aaf7fd974.1654674560.git.jani.nikula@intel.com

drm/edid: add new interfaces around struct drm_edid

Add new functions drm_edid_read(), drm_edid_read_ddc(), and
drm_edid_read_custom() to replace drm_get_edid() and drm_do_get_edid()
for reading the EDID. The transition is expected to happen over a fairly
long time.

Note that the new drm_edid_read*() functions do not do any of the
connector updates anymore. The reading and parsing will be completely
separated from each other.

Add new functions drm_edid_alloc(), drm_edid_dup(), and drm_edid_free()
for allocating and freeing drm_edid containers.

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6532a94cad6a79424f6d1918dbe7b7d607ac03.1654674560.git.jani.nikula@intel.com

drm/edid: keep track of alloc size in drm_do_get_edid()

We'll want to return the allocated buffer size in the future. Keep track
of it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8e4261d8c2947ea99240ea929f09a04878235f4e.1654674560.git.jani.nikula@intel.com

drm/edid: add block count and data helper functions for drm_edid

Add drm_edid based block count and data access helper functions that
take the EDID allocated size into account.

At the moment, the allocated size should always match the EDID size
indicated by the extension count, but this will change in the future.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a68c8667a88e7c451b001ad8bd86c8badb57fb8.1654674560.git.jani.nikula@intel.com

drm/edid: abstract cea data block collection size

Add a function to get the cea data block collection size.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5339ab3249400a3c41001967e7ff2611b58e0425.1654674560.git.jani.nikula@intel.com

drm/edid: fix CTA data block collection size for CTA version 3

The CTA Data Block Collection is valid only for CTA extension version
3. In versions 1 and 2, it is a reserved block, which we ignore.

The DTD start offset (byte 2, or d in CTA-861 spec), which determines
the CTA Data Block Collection size, is specified slightly differently
for different versions:

Version 1:
    d = offset for the byte following the reserved data block. If no
    data is provided in the reserved data block, then d=4. If no DTDs
    are provided, then d=0

Version 2:
    d = offset for the byte following the reserved data block. If no
    data is provided in the reserved data block, then d=4. If d=0, then
    no detailed timing descriptors are provided, and no data is provided
    in the reserved data block.

Version 3:
    d = offset for the byte following the data block collection. If no
    data is provided in the data block collection, then d=4. If d=0,
    then no detailed timing descriptors are provided, and no data is
    provided in the data block collection.

Ever since commit 9e50b9d55e9c ("drm: edid: Add some bounds checking"),
we've interpreted 0 to mean there are no DTDs but it's all Data
Blocks. Per the spec, Data Blocks are only valid for version 3, where we
should interpret 0 to mean there are no data blocks.

Follow the spec (and hope the EDIDs follow it too).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a4c94417f024cbafc5d4ca0a74e4617fc4325d1.1654674560.git.jani.nikula@intel.com

drm/syncobj: add missing error return code in drm_syncobj_transfer_to_timeline()

If dma_fence_unwrap_merge() fails, it should return error code
in drm_syncobj_transfer_to_timeline()

Fixes: ec8d985ff26f ("drm: use dma_fence_unwrap_merge() in drm_syncobj")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613063454.2609364-1-yangyingliang@huawei.com

drm: vkms: Alloc the compose frame using vzalloc

Currently, the memory to the composition frame is being allocated using
the kzmalloc. This comes with the limitation of maximum size of one
page size(which in the x86_64 is 4Kb and 4MB for default and hugepage
respectively).

Somes test of igt (e.g. kms_plane@pixel-format) uses more than 4MB when
testing some pixel formats like ARGB16161616 and the following error were
showing up when running kms_plane@plane-panning-bottom-right*:

[drm:vkms_composer_worker [vkms]] *ERROR* Cannot allocate memory for
output frame.

This problem is addessed by allocating the memory using kvzalloc that
circunvents this limitation.

V5: Improve the commit message and drop the debugging issues in VKMS
TO-DO(Melissa Wen).

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220404204515.42144-2-igormtorrente@gmail.com

drm/vkms: check plane_composer->map[0] before using it

Fix a copypasta error. The caller of compose_plane() already checks
primary_composer->map. In contrast, plane_composer->map is never
verified here before handling.

Fixes: 7938f4218168 ("dma-buf-map: Rename to iosys-map")
Reviewed-by: André Almeida <andrealmeid@riseup.net>
Signed-off-by: Tales Lelo da Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415111300.61013-2-tales.aparecida@gmail.com

Linux 5.19-rc2

drm/v3d: Add support for bcm2711

Add compatible string and Kconfig options and help for bcm2711.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603092610.1909675-4-pbrobinson@gmail.com

drm/v3d: Get rid of pm code

Runtime PM doesn't seem to work correctly on this driver. On top of
that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
driver's PM ops were not hooked-up.

So, in order to support regular operation with V3D on BCM2711 (Raspberry
Pi 4), get rid of the PM code. PM will be reinstated once we figure out
the underlying issues.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603092610.1909675-3-pbrobinson@gmail.com

dt-bindings: gpu: v3d: Add BCM2711's compatible

BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
compatible to the bindings.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603092610.1909675-2-pbrobinson@gmail.com

Merge tag 'platform-drivers-x86-v5.19-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Highlights:

   - Fix hp-wmi regression on HP Omen laptops introduced in 5.18

   - Several hardware-id additions

   - A couple of other tiny fixes"

* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel: hid: Add Surface Go to VGBS allow list
  platform/x86: hp-wmi: Use zero insize parameter only when supported
  platform/x86: hp-wmi: Resolve WMI query failures on some devices
  platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
  platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
  platform/x86: barco-p50-gpio: Add check for platform_driver_register
  platform/x86/intel: pmc: Support Intel Raptorlake P
  platform/x86/intel: Fix pmt_crashlog array reference
  platform/mellanox: Add static in struct declaration.
  platform/mellanox: Spelling s/platfom/platform/

Merge tag 'wq-for-5.19-rc1-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fixes from Tejun Heo:
 "Tetsuo's patch to trigger build warnings if system-wide wq's are
  flushed along with a TP type update and trivial comment update"

* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Switch to new kerneldoc syntax for named variable macro argument
  workqueue: Fix type of cpu in trace event
  workqueue: Wrap flush_workqueue() using a macro

Merge tag 'kbuild-fixes-v5.19' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Make the *.mod build rule portable for POSIX awk

 - Fix regression of 'make nsdeps'

 - Make scripts/check-local-export working for older bash versions

 - Fix scripts/gdb to extract the .config data from vmlinux

* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/gdb: change kernel config dumping method
  scripts/check-local-export: avoid 'wait $!' for process substitution
  scripts/nsdeps: adjust to the format change of *.mod files
  kbuild: avoid regex RS for POSIX awk

Merge tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client fixes from Steve French:
 "Three reconnect fixes, all for stable as well.

  One of these three reconnect fixes does address a problem with
  multichannel reconnect, but this does not include the additional
  fix (still being tested) for dynamically detecting multichannel
  adapter changes which will improve those reconnect scenarios even
  more"

* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: populate empty hostnames for extra channels
  cifs: return errors during session setup during reconnects
  cifs: fix reconnect on smb3 mount types

Merge tag 'random-5.19-rc2-for-linus' of git://git./linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - A fix for a 5.19 regression for a case in which early device tree
   initializes the RNG, which flips a static branch.

   On most plaforms, jump labels aren't initialized until much later, so
   this caused splats. On a few mailing list threads, we cooked up easy
   fixes for arm64, arm32, and risc-v. But then things looked slightly
   more involved for xtensa, powerpc, arc, and mips. And at that point,
   when we're patching 7 architectures in a place before the console is
   even available, it seems like the cost/risk just wasn't worth it.

   So random.c works around it now by checking the already exported
   `static_key_initialized` boolean, as though somebody already ran into
   this issue in the past. I'm not super jazzed about that; it'd be
   prettier to not have to complicate downstream code. But I suppose
   it's practical.

 - A few small code nits and adding a missing __init annotation.

 - A change to the default config values to use the cpu and bootloader's
   seeds for initializing the RNG earlier.

   This brings them into line with what all the distros do (Fedora/RHEL,
   Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
   least), and moreover will now give us test coverage in various test
   beds that might have caught the above device tree bug earlier.

 - A change to WireGuard CI's configuration to increase test coverage
   around the RNG.

 - A documentation comment fix to unrelated maintainerless CRC code that
   I was asked to take, I guess because it has to do with polynomials
   (which the RNG thankfully no longer uses).

* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  wireguard: selftests: use maximum cpu features and allow rng seeding
  random: remove rng_has_arch_random()
  random: credit cpu and bootloader seeds by default
  random: do not use jump labels before they are initialized
  random: account for arch randomness in bits
  random: mark bootloader randomness code as __init
  random: avoid checking crng_ready() twice in random_init()
  crc-itu-t: fix typo in CRC ITU-T polynomial comment

drm/bridge: rcar: Drop unused variables due to drm_of_get_data_lanes_count_ep

The rcar_mipi_dsi_parse_dt() now contains two uninitialized variables
due to conversion to common drm_of_get_data_lanes_count_ep() helper.
Drop them.

Fixes: d643daaf1694 ("drm/bridge: rcar: Convert to drm_of_get_data_lanes_count_ep")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-3-marex@denx.de

drm/bridge: tc358775: Fix drm_of_get_data_lanes_count_ep conversion

Initialize dsi_lanes to -1, so that in case the endpoint is missing,
probe would fail as it did before the conversion, instead of depending
on uninitialized variable and thus undefined behavior.

Fixes: 56426faa1492 ("drm/bridge: tc358775: Convert to drm_of_get_data_lanes_count_ep")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-2-marex@denx.de

drm: of: Mark empty drm_of_get_data_lanes_count and drm_of_get_data_lanes_ep static

Mark empty implementations of drm_of_get_data_lanes_count and
drm_of_get_data_lanes_ep as static inline, just like the rest
of empty implementations of various functions in drm_of.h .
Add missing comma to drm_of_get_data_lanes_count_ep() .

Fixes: fc801750b197 ("drm: of: Add drm_of_get_data_lanes_count and drm_of_get_data_lanes_ep")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-1-marex@denx.de

drm/bridge: ti-sn65dsi83: Convert to drm_of_get_data_lanes_count

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612102947.13912-1-marex@denx.de

drm/bridge: ti-sn65dsi83: Do not cache dsi_lanes and host twice

The DSI lane count can be accessed via the dsi device pointer, make use
of that. The DSI host pointer is only used in sn65dsi83_host_attach(),
move the code around so that the host does not have to be cached in the
driver private data. This simplifies the code further. No functional
change.

This has the added bonus that lt9211, tc358767, sn65dsi83 now use very
similar *_mipi_dsi_host_attach() which is ripe for deduplication.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612102918.13874-1-marex@denx.de

platform/x86/intel: hid: Add Surface Go to VGBS allow list

The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.

BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hp-wmi: Use zero insize parameter only when supported

commit be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14a21a ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.

Fix this by using zero insize only if 0x5 error code is returned

Tested on Omen 15 AMD (2020) board ID: 8786.

Fixes: be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hp-wmi: Resolve WMI query failures on some devices

WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:

         CreateByteField (Arg1, 0x10, D008)
         CreateByteField (Arg1, 0x11, D009)
         CreateByteField (Arg1, 0x12, D010)
         CreateDWordField (Arg1, 0x10, D032)
         CreateField (Arg1, 0x80, 0x0400, D128)

In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.

ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)

The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not.  This particular
behavior occurs in older BIOS and reproduced in OMEN laptops.  Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements.  This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.

This patch was tested on several OMEN, Elite, and Zbooks.  It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx.  No problems were reported when testing on several Elite
and Zbooks notebooks.

Fixes: 4b4967cbd268 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

drm/bridge: rcar: Convert to drm_of_get_data_lanes_count_ep

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-11-marex@denx.de

drm/msm: Convert to drm_of_get_data_lanes_count

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-10-marex@denx.de

drm/bridge: ti-sn65dsi86: Convert to drm_of_get_data_lanes_count

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-9-marex@denx.de

drm/bridge: tc358775: Convert to drm_of_get_data_lanes_count_ep

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-7-marex@denx.de

drm/bridge: tc358767: Convert to drm_of_get_data_lanes_count

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-6-marex@denx.de

drm/bridge: lt9211: Convert to drm_of_get_data_lanes_count

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-5-marex@denx.de

drm/bridge: lt8912: Convert to drm_of_get_data_lanes_count_ep

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-4-marex@denx.de

drm/bridge: icn6211: Convert to drm_of_get_data_lanes_count_ep

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-3-marex@denx.de

drm/bridge: anx7625: Convert to drm_of_get_data_lanes_count

Convert driver to use this new helper to standardize
OF "data-lanes" parsing.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xin Ji <xji@analogixsemi.com>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-2-marex@denx.de

drm: of: Add drm_of_get_data_lanes_count and drm_of_get_data_lanes_ep

Add helper function to count and sanitize DT "data-lanes" property
and return either error or the data-lanes count. This is useful for
both DSI and (e)DP "data-lanes" property. The later version of the
function is an extra wrapper which handles the endpoint look up by
regs, that's what majority of the drivers duplicate too, but not all
of them.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-1-marex@denx.de

workqueue: Switch to new kerneldoc syntax for named variable macro argument

The syntax without dots is available since commit 43756e347f21
("scripts/kernel-doc: Add support for named variable macro arguments").

The same HTML output is produced with and without this patch.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Merge tag 'gpio-fixes-for-v5.19-rc2' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
 "A set of fixes. Most address the new warning we emit at build time
  when irq chips are not immutable with some additional tweaks to
  gpio-crystalcove from Andy and a small tweak to gpio-dwapd.

   - make irq_chip structs immutable in several Diolan and intel drivers
     to get rid of the new warning we emit when fiddling with irq chips

   - don't print error messages on probe deferral in gpio-dwapb"

* tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: dwapb: Don't print error on -EPROBE_DEFER
  gpio: dln2: make irq_chip immutable
  gpio: sch: make irq_chip immutable
  gpio: merrifield: make irq_chip immutable
  gpio: wcove: make irq_chip immutable
  gpio: crystalcove: Join function declarations and long lines
  gpio: crystalcove: Use specific type and API for IRQ number
  gpio: crystalcove: make irq_chip immutable

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Driver fixes and and one core patch.

  Nine of the driver patches are minor fixes and reworks to lpfc and the
  rest are trivial and minor fixes elsewhere"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pmcraid: Fix missing resource cleanup in error case
  scsi: ipr: Fix missing/incorrect resource cleanup in error case
  scsi: mpt3sas: Fix out-of-bounds compiler warning
  scsi: lpfc: Update lpfc version to 14.2.0.4
  scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
  scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds
  scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
  scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted
  scsi: lpfc: Address NULL pointer dereference after starget_to_rport()
  scsi: lpfc: Resolve some cleanup issues following SLI path refactoring
  scsi: lpfc: Resolve some cleanup issues following abort path refactoring
  scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()
  scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
  scsi: sd: Fix interpretation of VPD B9h length

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
 "Fixes all over the place, most notably fixes for latent bugs in
  drivers that got exposed by suppressing interrupts before DRIVER_OK,
  which in turn has been done by 8b4ec69d7e09 ("virtio: harden vring
  IRQ")"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  um: virt-pci: set device ready in probe()
  vdpa: make get_vq_group and set_group_asid optional
  virtio: Fix all occurences of the "the the" typo
  vduse: Fix NULL pointer dereference on sysfs access
  vringh: Fix loop descriptors check in the indirect cases
  vdpa/mlx5: clean up indenting in handle_ctrl_vlan()
  vdpa/mlx5: fix error code for deleting vlan
  virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
  vdpa/mlx5: Fix syntax errors in comments
  virtio-rng: make device ready before making request

drm: Fix htmldocs indentation warning w/ DP AUX power requirements

Two blank lines are needed to make the rst valid.

Fixes: 69ef4a192bba ("drm: Document the power requirements for DP AUX transfers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611095445.1.I534072d346b1ebbf0db565b714de9b65cbb24651@changeid

Merge tag 'loongarch-fixes-5.19-1' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen.
 "Fix build errors and a stale comment"

* tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Remove MIPS comment about cycle counter
  LoongArch: Fix copy_thread() build errors
  LoongArch: Fix the !CONFIG_SMP build

iov_iter: fix build issue due to possible type mis-match

Commit 6c77676645ad ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()")
introduced a problem on some 32-bit architectures (at least arm, xtensa,
csky,sparc and mips), that have a 'size_t' that is 'unsigned int'.

The reason is that we now do

    min(nr * PAGE_SIZE - offset, maxsize);

where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is
'unsigned long'.  As a result, the normal C type rules means that the
first argument to 'min()' ends up being 'unsigned long'.

In contrast, 'maxsize' is of type 'size_t'.

Now, 'size_t' and 'unsigned long' are always the same physical type in
the kernel, so you'd think this doesn't matter, and from an actual
arithmetic standpoint it doesn't.

But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if
it could also be 'unsigned long'.  In that situation, both are unsigned
32-bit types, but they are not the *same* type.

And as a result 'min()' will complain about the distinct types (ignore
the "pointer types" part of the error message: that's an artifact of the
way we have made 'min()' check types for being the same):

  lib/iov_iter.c: In function 'iter_xarray_get_pages':
  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
     20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
        |                                   ^~
  lib/iov_iter.c:1464:16: note: in expansion of macro 'min'
   1464 |         return min(nr * PAGE_SIZE - offset, maxsize);
        |                ^~~

This was not visible on 64-bit architectures (where we always define
'size_t' to be 'unsigned long').

Force these cases to use 'min_t(size_t, x, y)' to make the type explicit
and avoid the issue.

[ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned
  long' arithmetically. We've certainly historically seen environments
  with 16-bit address spaces and 32-bit 'unsigned long'.

  Similarly, even in 64-bit modern environments, 'size_t' could be its
  own type distinct from 'unsigned long', even if it were arithmetically
  identical.

  So the above type commentary is only really descriptive of the kernel
  environment, not some kind of universal truth for the kinds of wild
  and crazy situations that are allowed by the C standard ]

Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/
Cc: Jeff Layton <jlayton@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wireguard: selftests: use maximum cpu features and allow rng seeding

By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

scripts/gdb: change kernel config dumping method

MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.

Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.

Fixes: 13610aa908dc ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

um: virt-pci: set device ready in probe()

Call virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function.  (The virtio core sets the device
ready when probe returns.)

Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ")
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>

Merge tag 'nfsd-5.19-1' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:
 "Notable changes:

   - There is now a backup maintainer for NFSD

  Notable fixes:

   - Prevent array overruns in svc_rdma_build_writes()

   - Prevent buffer overruns when encoding NFSv3 READDIR results

   - Fix a potential UAF in nfsd_file_put()"

* tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Remove pointer type casts from xdr_get_next_encode_buffer()
  SUNRPC: Clean up xdr_get_next_encode_buffer()
  SUNRPC: Clean up xdr_commit_encode()
  SUNRPC: Optimize xdr_reserve_space()
  SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
  SUNRPC: Trap RDMA segment overflows
  NFSD: Fix potential use-after-free in nfsd_file_put()
  MAINTAINERS: reciprocal co-maintainership for file locking and nfsd

cifs: populate empty hostnames for extra channels

Currently, the secondary channels of a multichannel session
also get hostname populated based on the info in primary channel.
However, this will end up with a wrong resolution of hostname to
IP address during reconnect.

This change fixes this by not populating hostname info for all
secondary channels.

Fixes: 5112d80c162f ("cifs: populate server_hostname for extra channels")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'for-5.19/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM core's bioset initialization so that blk integrity pool is
   properly setup. Remove now unused bioset_init_from_src.

 - Fix DM zoned hang from locking imbalance due to needless check in
   clone_endio().

* tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix zoned locking imbalance due to needless check in clone_endio
  block: remove bioset_init_from_src
  dm: fix bio_set allocation

Merge branch 'fscache-fixes' of git://git./linux/kernel/git/dhowells/linux-fs

Pull fscache cleanups from David Howells:

 - fix checker complaint in afs

 - two netfs cleanups:

    - netfs_inode calling convention cleanup plus the requisite
      documentation changes

    -  replace the ->cleanup op with a ->free_request op.

       This is possible as the I/O request is now always available at
       the cleanup point as the stuff to be cleaned up is no longer
       passed into the API functions, but rather obtained by ->init_request.

* 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Rename the netfs_io_request cleanup op and give it an op pointer
  netfs: Further cleanups after struct netfs_inode wrapper introduced
  afs: Fix some checker issues

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull iov_iter fix from Al Viro:
 "ITER_XARRAY get_pages fix; now the return value is a lot saner (and
  more similar to logics for other flavours)"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: Fix iter_xarray_get_pages{,_alloc}()

platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF

Tested and works on my system.

Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/20220608212028.28307-1-git@augustwikerfors.se
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support

Add dmi_system_id of Gigabyte Z690M AORUS ELITE AX DDR4 board.
Tested on my PC.

Signed-off-by: Piotr Chmura <chmooreck@gmail.com>
Link: https://lore.kernel.org/r/bd83567e-ebf5-0b31-074b-5f6dc7f7c147@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: barco-p50-gpio: Add check for platform_driver_register

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 86af1d02d458 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/intel: pmc: Support Intel Raptorlake P

Add Raptorlake P to the list of the platforms that intel_pmc_core driver
supports for pmc_core device. Raptorlake P PCH is based on Alderlake P
PCH.

Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220602012617.20100-1-george.d.sworo@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/intel: Fix pmt_crashlog array reference

The probe function pmt_crashlog_probe() may incorrectly reference
the 'priv->entry array' as it uses 'i' to reference the array instead
of 'priv->num_entries' as it should.  This is similar to the problem
that was addressed in pmt_telemetry_probe via commit 2cdfa0c20d58
("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic").

Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220526203140.339120-1-darcari@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: Add static in struct declaration.

Fix problem of missing static in struct declaration.

Fixes: 662f24826f954 ("platform/mellanox: Add support for new SN2201 system")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

iov_iter: Fix iter_xarray_get_pages{,_alloc}()

The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page.  Various terms of the equation cancel out
and you end up with actual == offset.  The same issue exists in
iter_xarray_get_pages_alloc().

Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.

This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it.  Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.

Fixes: 7ff5062079ef ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

netfs: Rename the netfs_io_request cleanup op and give it an op pointer

The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).

So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com

netfs: Further cleanups after struct netfs_inode wrapper introduced

Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up.  For
type safety, it's better not to do that (and it's less typing too).

Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer.  Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.

netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.

Changes
=======
- Updated the kerneldoc comments and documentation [DH].

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/

afs: Fix some checker issues

Remove an unused global variable and make another static as reported by
make C=1.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Merge tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache

Pull folio fixes from Matthew Wilcox:
 "Four folio-related fixes:

   - Don't release a folio while it's still locked

   - Fix a use-after-free after dropping the mmap_lock

   - Fix a memory leak when splitting a page

   - Fix a kernel-doc warning for struct folio"

* tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache:
  mm: Add kernel-doc for folio->mlock_count
  mm/huge_memory: Fix xarray node memory leak
  filemap: Cache the value of vm_flags
  filemap: Don't release a locked folio