arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc

[ Upstream commit 17ac8af678b6da6a8f1df7da8ebf2c5198741827 ]

Correct the TCS config by updating the number of TCSes for each type.

Cc: devicetree@vger.kernel.org
Fixes: d8cf9372b654 ("arm64: dts: qcom: sm8150: Add apps shared nodes")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641749107-31979-2-git-send-email-quic_mkshah@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: use proper TWD binding

[ Upstream commit 33826e9c6ba76b265d4e26cb95493fa27ed78974 ]

Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
reset. Actual timers happen to be at block beginning but they only span
across the first 0x28 registers. It means the old block description was
incorrect (size 0x3c).

Drop timers binding for now and use documented TWD binding. Timers
should be properly documented and defined as TWD subnode.

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema

[ Upstream commit d60507200485bc778bf6a5556271d784ab09d913 ]

Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.

While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).

Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: fix microphone bias properties and values

[ Upstream commit 625c24460dbbc3b6c9a148c0a30f0830893fc909 ]

replace millivolt with correct microvolt and adjust value to
the minimal value allowed by documentation.

Found with `make qcom/sdm845-oneplus-fajita.dtb`.

Fixes:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'

Fixes: 27ca1de07dc3 ("arm64: dts: qcom: sdm845: add slimbus nodes")

Signed-off-by: David Heidelberg <david@ixit.cz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213195105.114596-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: aoss: remove spurious IRQF_ONESHOT flags

[ Upstream commit 8030cb9a55688c1339edd284d9d6ce5f9fc75160 ]

Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of the irq. For "normal" kernels
(without forced threading) then, if there is no thread_fn, then
IRQF_ONESHOT is a nop.

In this case disabling forced threading is not appropriate for this driver
because it calls wake_up_all() and this API cannot be called from
no-thread interrupt handlers on PREEMPT_RT systems (deadlock risk, triggers
sleeping-while-atomic warnings).

Fix this by removing IRQF_ONESHOT.

Fixes: 2209481409b7 ("soc: qcom: Add AOSS QMP driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[bjorn: Added Fixes tag]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220127173554.158111-1-daniel.thompson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem

[ Upstream commit 0ff027027e05a866491bbb53494f0e2a61354c85 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: 01f937ffc468 ("soc: qcom: ocmem: don't return NULL in of_get_ocmem")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220107073126.2335-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: rpmpd: Check for null return of devm_kcalloc

[ Upstream commit 5a811126d38f9767a20cc271b34db7c8efc5a46c ]

Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".

Fixes: bbe3a66c3f5a ("soc: qcom: rpmpd: Add a Power domain driver to model corners")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211231094419.1941054-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: ipq4019: fix sleep clock

[ Upstream commit 3d7e7980993d2c1ae42d3d314040fc2de6a9c45f ]

It seems like sleep_clk was copied from ipq806x.
Fix ipq40xx sleep_clk to the value QSDK defines.

Link: https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?id=d92ec59973484acc86dd24b67f10f8911b4b4b7d
Link: https://patchwork.kernel.org/comment/22721613/
Fixes: bec6ba4cdf2a ("qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> (clock-output-names)
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (removed clock rename)
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220170352.34591-1-chunkeey@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom: scm: Remove reassignment to desc following initializer

[ Upstream commit 7823e5aa5d1dd9ed5849923c165eb8f29ad23c54 ]

Member assignments to qcom_scm_desc were moved into struct initializers
in 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers") including
the case in qcom_scm_iommu_secure_ptbl_init, except that the - now
duplicate - assignment to desc was left in place. While not harmful,
remove this unnecessary extra reassignment.

Fixes: 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208083423.22037-2-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix OpenBMC flash layout label addresses

[ Upstream commit e011df3579ac980d840db8e8c3b9431f88ebddab ]

We've ended up with some inconsistencies between the addresses in the
DT node labels and the actual offsets of the partitions; this brings
them back in sync.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 529022738c8e ("ARM: dts: Add OpenBMC flash layout")
Fixes: 8dec60e7b8d0 ("ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout")
Reviewed-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20220105003718.19888-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()

[ Upstream commit 78482af095abd9f4f29f1aa3fe575d25c6ae3028 ]

This code has two bugs:
1) "cnt" is 255 but the size of the buffer is 256 so the last byte is
   not used.
2) If we try to print more than 255 characters then "cnt" will be
   negative and that will trigger a WARN() in snprintf(). The fix for
   this is to use scnprintf() instead of snprintf().

We can re-write this code to be cleaner:
1) Rename "offset" to "off" because that's shorter.
2) Get rid of the "cnt" variable and just use "size - off" directly.
3) Get rid of the "read" variable and just increment "off" directly.

Fixes: 96fe6a2109db ("fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()

[ Upstream commit fee5c1e4b789e41719af9fee0e2dd397cd31988f ]

If "sinfo->config" is not found, then return -ENODEV.  Don't
return success.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()

[ Upstream commit 1791f487f877a9e83d81c8677bd3e7b259e7cb27 ]

I got a null-ptr-deref report:

BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:fb_destroy_modelist+0x38/0x100
...
Call Trace:
 ufx_usb_probe.cold+0x2b5/0xac1 [smscufx]
 usb_probe_interface+0x1aa/0x3c0 [usbcore]
 really_probe+0x167/0x460
...
 ret_from_fork+0x1f/0x30

If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will
be called to destroy modelist in the error handling path. But modelist
has not been initialized yet, so it will result in null-ptr-deref.

Initialize modelist before calling fb_alloc_cmap() to fix this bug.

Fixes: 3c8a63e22a08 ("Add support for SMSC UFX6000/7000 USB display adapters")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: controlfb: Fix COMPILE_TEST build

[ Upstream commit 567e44fb51b4f909ae58038a7301352eecea8426 ]

If PPC_BOOK3S, PPC_PMAC and PPC32 is n, COMPILE_TEST build fails:

drivers/video/fbdev/controlfb.c:70:0: error: "pgprot_cached_wthru" redefined [-Werror]
 #define pgprot_cached_wthru(prot) (prot)

In file included from ./arch/powerpc/include/asm/pgtable.h:20:0,
                 from ./include/linux/pgtable.h:6,
                 from ./include/linux/mm.h:33,
                 from drivers/video/fbdev/controlfb.c:37:
./arch/powerpc/include/asm/nohash/pgtable.h:243:0: note: this is the location of the previous definition
 #define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \

Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen

[ Upstream commit 62d89a7d49afe46e6b9bbe9e23b004ad848dbde4 ]

Start from commit 11be60bd66d54 "matroxfb: add Matrox MGA-G200eW board
support", when maxvram is 0x800000, monitor become black w/ error message
said: "The current input timing is not supported by the monitor display.
Please change your input timing to 1920x1080@60Hz ...".

Fixes: 11be60bd66d5 ("matroxfb: add Matrox MGA-G200eW board support")
Signed-off-by: Z. Liu <liuzx@knownsec.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: aspeed: Correct value for h-total-pixels

[ Upstream commit 4b732a0016853eaff35944f900b0db66f3914374 ]

Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5648: Don't pack controls struct

[ Upstream commit edd4fbff5378a8103470304809195dc8f4b1d42a ]

Don't pack the driver specific struct containing control pointers. This
lead to potential alignment issues when working with the pointers.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l: Avoid unaligned access warnings when printing 4cc modifiers

[ Upstream commit 24bb30c8c894ec7213ad810b46e2a6a4c12136c1 ]

Pointers V4L2 pixelformat and dataformat fields in a few packed structs
are directly passed to printk family of functions. This could result in an
unaligned access albeit no such possibility appears to exist at the
moment i.e. this clang warning appears to be a false positive.

Address the warning by copying the pixelformat or dataformat value to a
local variable first.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: e927e1e0f0dd ("v4l: ioctl: Use %p4cc printk modifier to print FourCC codes")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov6650: Fix set format try processing path

[ Upstream commit 1f6f1e959a85ee999fbc86f4b094827f63194c7f ]

According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").

In case of set format active processing path the issue can be fixed
easily by excluding a call to set active selection from that path. That
will effectively limit frame size processing to optimal frame scaling
against active crop rectangle without touching it.  Users can just call
set active selection themselves to obtain desired frame size.  However,
set format try processing path needs more work.

First of all, the driver should be extended with set try selection
support.  Lack of it constraints video device drivers to not use
subdevice cropping at all while processing user requested active frame
size, otherwise their set try format results might differ from active.

Next, set format try processing path should use pad config crop
rectangle as a reference, not the active one as it does now.  That
issue can be resolved easily as soon as set try selection support is
added to the driver so pad config crop rectangle can be maintained by
users via selection API.

Last, set format try processing path should give the same results as
active in respect to active vs. pad config crop rectangle geometry.
Both rectangles should be either not touched by set format (that's what
we are going to achieve) or modified the same way, otherwise users
won't be able to obtain equal results from both paths while iterating
through set format and set selection operations in order to obtain
desired frame size.

We can't begin with modifying set format pad operation as not to touch
crop rectangle since that depends on availability of set try selection
for symmetry.  Neither can we begin with adding set try selection since
that in turn depends on equal handling of active and pad config crop
rectangles by set format.  We can either implement all required
modifications in a single patch, or begin with fixing current set
format try processing path to appropriately handle pad config crop
rectangle.  This patch implements the latter approach as believed to
be more readable.

Move crop rectangle adjustments code from a helper (the former
implementation of .s_fmt(), now called from set format active
processing path) to the body of set format pad operation function
where it can be also used for processing try requests for symmetry with
active ones.  As the helper no longer processes frame geometry, only
frame format and half scaling, simplify its API accordingly and update
its users.

Moreover, extract code that applies crop rectangle hardware limits
(now a part of .set_selection() operation which is called from set
format active processing path) to a new helper and call that helper
from set format try processing path as well for symmetry with active.

[Sakari Ailus: Rebase on subdev state patches]

Fixes: 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Fix overfill bottom register field name

[ Upstream commit 89d78e0133e71ba324fb67ca776223fba4353418 ]

The Hantro H1 hardware can crop off pixels from the right and bottom of
the source frame. These are controlled with the H1_REG_IN_IMG_CTRL_OVRFLB
and H1_REG_IN_IMG_CTRL_OVRFLR in the H1_REG_IN_IMG_CTRL register.

The ChromeOS kernel driver that this was based on incorrectly added the
_D4 suffix H1_REG_IN_IMG_CTRL_OVRFLB. This field crops the bottom of the
input frame, and the number is _not_ divided by 4. [1]

Correct the name to avoid confusion when crop support with the selection
API is added.

[1] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/ \
heads/chromeos-4.19/drivers/staging/media/hantro/hantro_h1_vp8_enc.c#377

Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Fixes: a29add8c9bb2 ("media: rockchip/vpu: rename from rockchip to hantro")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: meson: vdec: potential dereference of null pointer

[ Upstream commit c8c80c996182239ff9b05eda4db50184cf3b2e99 ]

As the possible failure of the kzalloc(), the 'new_ts' could be NULL
pointer.
Therefore, it should be better to check it in order to avoid the
dereference of the NULL pointer.
Also, the caller esparser_queue() needs to deal with the return value of
the amvdec_add_ts().

Fixes: 876f123b8956 ("media: meson: vdec: bring up to compliance")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: Fix missing put_device() call in coda_get_vdoa_data

[ Upstream commit ca85d271531a1e1c86f24b892f57b7d0a3ddb5a6 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: simple-card-utils: Set sysclk on all components

[ Upstream commit ce2f7b8d4290c22e462e465d1da38a1c113ae66a ]

If an mclk-fs value was provided in the device tree configuration, the
calculated MCLK was fed into the downstream codec DAI and CPU DAI,
however set_sysclk was not being called on the platform device. Some
platform devices such as the Xilinx Audio Formatter need to know the MCLK
as well.

Call snd_soc_component_set_sysclk on each component in the stream to set
the proper sysclk value in addition to the existing call of
snd_soc_dai_set_sysclk on the codec DAI and CPU DAI. This may end up
resulting in redundant calls if one of the snd_soc_dai_set_sysclk calls
ends up calling snd_soc_component_set_sysclk itself, but that isn't
expected to cause any significant harm.

Fixes: f48dcbb6d47d ("ASoC: simple-card-utils: share asoc_simple_hw_param()")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-5-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting

[ Upstream commit 1c5091fbe7e0d0804158200b7feac5123f7b4fbd ]

This driver did not set the MM2S Fs Multiplier Register to the proper
value for playback streams. This needs to be set to the sample rate to
MCLK multiplier, or random stream underflows can occur on the downstream
I2S transmitter.

Store the sysclk value provided via the set_sysclk callback and use that
in conjunction with the sample rate in the hw_params callback to calculate
the proper value to set for this register.

Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio

[ Upstream commit aa505ecccf2ae7546e0e262d574e18a9241f3005 ]

Since the potential failure of the devm_regmap_init_mmio(), it will
return error pointer and be assigned to the regmap.
Then the error pointer will be dereferenced.
For example rx->regmap will be used in rx_macro_mclk_enable().
Therefore, it should be better to check it.

Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: 809bcbcecebf ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220121171031.2826198-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively

[ Upstream commit 6570f991582e32b7992601d0497c61962a2c5dcc ]

Instead of recursively calling rz_ssi_pio_recv() use a while loop
to read the samples from RX fifo.

This also fixes an issue where the return value of rz_ssi_pio_recv()
was ignored when called recursively.

Fixes: 03e786bd4341 ("ASoC: sh: Add RZ/G2L SSIF-2 driver")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110094711.8574-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atmel: atmel-sama7g5-isc: fix ispck leftover

[ Upstream commit 1b52ce99e9f2dcda868a1a7026bfb58d04bd6bc8 ]

The ispck is not used for sama7g5 variant of the ISC.
Calls to ispck have to be removed also from module insert/removal.

Fixes: d7f26849ed7c ("media: atmel: fix the ispck initialization")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bttv: fix WARNING regression on tunerless devices

[ Upstream commit ef058cc8b7193d15a771272359c7454839ae74ee ]

Commit 2161536516ed ("media: media/pci: set device_caps in struct video_device")
introduced a regression: V4L2_CAP_TUNER is always present in device_caps,
even when the device has no tuner.

This causes a warning:
WARNING: CPU: 0 PID: 249 at drivers/media/v4l2-core/v4l2-ioctl.c:1102 v4l_querycap+0xa0/0xb0 [videodev]

Fixes: 2161536516ed ("media: media/pci: set device_caps in struct video_device")
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx: imx8mq-mipi_csi2: fix system resume

[ Upstream commit f0c2ba1ed4ad868331d8c6ea9119669a729b01a9 ]

during system resume, interconnect bandwidth would currently be requested
even though the device is runtime suspended. This leaves the system in an
unbalanced state.

Fix that by only doing that in runtimem pm and splitting up runtime and
system suspend to be a more readable:
imx8mq_mipi_csi_pm_*() does the generic things called from system- and
runtime functions that each do specific things on top.

Fixes: f33fd8d77dd0 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation

[ Upstream commit 59c2b6d51803ad6b7af28f2a60a843b24374e692 ]

The place where this register writel() that masks one interrupt is placed
does not guarantee that the device is powered so that's not allowed.
Moreover imx8mq_mipi_csi_start_stream() masks the interrupt anyway so the
write is not even needed. Remove it as this is a mistake that slipped in
with the driver.

Fixes: f33fd8d77dd0 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-vcodec: potential dereference of null pointer

[ Upstream commit e25a89f743b18c029bfbe5e1663ae0c7190912b0 ]

The return value of devm_kzalloc() needs to be checked.
To avoid use of null pointer in case of thefailure of alloc.

Fixes: 46233e91fa24 ("media: mtk-vcodec: move firmware implementations into their own files")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls

[ Upstream commit 8310ca94075e784bbb06593cd6c068ee6b6e4ca6 ]

DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers
only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including
offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF
ioctls. This leads to differences in the values presented to userspace.
If userspace attempts to mmap the capture buffer directly using values
from DQBUF, it will fail.

Move the code that applies the magic offset into a helper, and call
that helper from all four ioctl entry points.

[hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret]

Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf")
Fixes: 908a0d7c588e ("[media] v4l: mem2mem: port to videobuf2")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: staging: media: imx: imx7-mipi-csis: Make subdev name unique

[ Upstream commit 5be7f8c91d25089be847a71b336c13b5bb0db772 ]

When multiple CSIS instances are present in a single graph, they are
currently all named "imx7-mipi-csis.0", which breaks the entity name
uniqueness requirement. Fix it by using the device name to create the
subdev name.

Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com> # On i.MX8MP
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: vfe-170: fix "VFE halt timeout" error

[ Upstream commit 1ce8c48b06f249a9739e36c5d56883f6f49ce047 ]

This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: csid-170: set the right HALT_CMD when disabled

[ Upstream commit ee780cd7be3b5608550bafe7d5f113db2140e99b ]

Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: csid-170: don't enable unused irqs

[ Upstream commit a6da362491e409de0978d733441e59db6584d69f ]

csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: csid-170: fix non-10bit formats

[ Upstream commit 14d510e040f85ff05734fd6db8bae44b47886464 ]

Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size

[ Upstream commit 241f5b67fb48def58643f279dfb8468bdd54b443 ]

vb2_dma_contig_set_max_seg_size need to have a size in parameter and not
a DMA_BIT_MASK().
While fixing this issue, also fix error handling of all DMA size
setting.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: d4ae3689226e5 ("media: zoran: device support only 32bit DMA address")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios

[ Upstream commit 96f79935015cf3d7ca6fabf63cd13b8af45a7713 ]

GPIO_ALIVE and GPIO_CMGP blocks in Exynos850 SoC don't have EINT
capabilities (like EINT_SVC register), and there are no corresponding
interrupts wired to GIC. Instead those blocks have wake-up interrupts
for each pin. The ".eint_gpio_init" callbacks were specified by mistake
for these blocks, when porting pinctrl code from downstream kernel. That
leads to error messages like this:

    samsung-pinctrl 11850000.pinctrl: irq number not available

Remove ".eint_gpio_init" for pinctrl_alive and pinctrl_gpmc to fix this
error. This change doesn't affect proper interrupt handling for related
pins, as all those pins are handled in ".eint_wkup_init".

Fixes: cdd3d945dcec ("pinctrl: samsung: Add Exynos850 SoC specific data")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220114203757.4860-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: make kunit_test_timeout compatible with comment

[ Upstream commit bdd015f7b71b92c2e4ecabac689642cc72553e04 ]

In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC"
represent 5min.  However, it is wrong when dealing with arm64 whose
default HZ = 250, or some other situations.  Use msecs_to_jiffies to fix
this, and kunit_test_timeout will work as desired.

Link: https://lkml.kernel.org/r/20220309083753.1561921-3-liupeng256@huawei.com
Fixes: 5f3e06208920 ("kunit: test: add support for test abort")
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/base/memory: add memory block to memory group after registration succeeded

[ Upstream commit 7ea0d2d79da09d1f7d71c96a9c9bc1b5229360b5 ]

If register_memory() fails, we freed the memory block but already added
the memory block to the group list, not good.  Let's defer adding the
block to the memory group to after registering the memory block device.

We do handle it properly during unregister_memory(), but that's not
called when the registration fails.

Link: https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com
Fixes: 028fc57a1c36 ("drivers/base/memory: introduce "memory groups" to logically group memory blocks")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests, x86: fix how check_cc.sh is being invoked

[ Upstream commit ef696f93ed9778d570bd5ac58414421cdd4f1aab ]

The $(CC) variable used in Makefiles could contain several arguments
such as "ccache gcc".  These need to be passed as a single string to
check_cc.sh, otherwise only the first argument will be used as the
compiler command.  Without quotes, the $(CC) variable is passed as
distinct arguments which causes the script to fail to build trivial
programs.

Fix this by adding quotes around $(CC) when calling check_cc.sh to pass
the whole string as a single argument to the script even if it has
several words such as "ccache gcc".

Link: https://lkml.kernel.org/r/d0d460d7be0107a69e3c52477761a6fe694c1840.1646991629.git.guillaume.tucker@collabora.com
Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Guenter Roeck <groeck@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix compressed file start atomic write may cause data corruption

[ Upstream commit 9b56adcf525522e9ffa52471260298d91fc1d395 ]

When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.

This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE)  --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE)  -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4   -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.

The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix unexpected error path when reflinking an inline extent

[ Upstream commit 1f4613cdbe7739ce291554b316bff8e551383389 ]

When reflinking an inline extent, we assert that its file offset is 0 and
that its uncompressed length is not greater than the sector size. We then
return an error if one of those conditions is not satisfied. However we
use a return statement, which results in returning from btrfs_clone()
without freeing the path and buffer that were allocated before, as well as
not clearing the flag BTRFS_INODE_NO_DELALLOC_FLUSH for the destination
inode.

Fix that by jumping to the 'out' label instead, and also add a WARN_ON()
for each condition so that in case assertions are disabled, we get to
known which of the unexpected conditions triggered the error.

Fixes: a61e1e0df9f321 ("Btrfs: simplify inline extent handling when doing reflinks")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid potential deadlock

[ Upstream commit 344150999b7fc88502a65bbb147a47503eca2033 ]

Quoted from Jing Xia's report, there is a potential deadlock may happen
between kworker and checkpoint as below:

[T:writeback] [T:checkpoint]
- wb_writeback
 - blk_start_plug
bio contains NodeA was plugged in writeback threads
- do_writepages  -- sync write inodeB, inc wb_sync_req[DATA]
 - f2fs_write_data_pages
  - f2fs_write_single_data_page -- write last dirty page
   - f2fs_do_write_data_page
    - set_page_writeback  -- clear page dirty flag and
    PAGECACHE_TAG_DIRTY tag in radix tree
    - f2fs_outplace_write_data
     - f2fs_update_data_blkaddr
      - f2fs_wait_on_page_writeback -- wait NodeA to writeback here
   - inode_dec_dirty_pages
 - writeback_sb_inodes
  - writeback_single_inode
   - do_writepages
    - f2fs_write_data_pages -- skip writepages due to wb_sync_req[DATA]
     - wbc->pages_skipped += get_dirty_pages() -- PAGECACHE_TAG_DIRTY is not set but get_dirty_pages() returns one
  - requeue_inode -- requeue inode to wb->b_dirty queue due to non-zero.pages_skipped
 - blk_finish_plug

Let's try to avoid deadlock condition by forcing unplugging previous bio via
blk_finish_plug(current->plug) once we'v skipped writeback in writepages()
due to valid sbi->wb_sync_req[DATA/NODE].

Fixes: 687de7f1010c ("f2fs: avoid IO split due to mixed WB_SYNC_ALL and WB_SYNC_NONE")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race

[ Upstream commit 49bef33e4b87b743495627a529029156c6e09530 ]

John reported that push_rt_task() can end up invoking
find_lowest_rq(rq->curr) when curr is not an RT task (in this case a CFS
one), which causes mayhem down convert_prio().

This can happen when current gets demoted to e.g. CFS when releasing an
rt_mutex, and the local CPU gets hit with an rto_push_work irqwork before
getting the chance to reschedule. Exactly who triggers this work isn't
entirely clear to me - switched_from_rt() only invokes rt_queue_pull_task()
if there are no RT tasks on the local RQ, which means the local CPU can't
be in the rto_mask.

My current suspected sequence is something along the lines of the below,
with the demoted task being current.

  mark_wakeup_next_waiter()
    rt_mutex_adjust_prio()
      rt_mutex_setprio() // deboost originally-CFS task
check_class_changed()
  switched_from_rt() // Only rt_queue_pull_task() if !rq->rt.rt_nr_running
  switched_to_fair() // Sets need_resched
      __balance_callbacks() // if pull_rt_task(), tell_cpu_to_push() can't select local CPU per the above
      raw_spin_rq_unlock(rq)

       // need_resched is set, so task_woken_rt() can't
       // invoke push_rt_tasks(). Best I can come up with is
       // local CPU has rt_nr_migratory >= 2 after the demotion, so stays
       // in the rto_mask, and then:

       <some other CPU running rto_push_irq_work_func() queues rto_push_work on this CPU>
 push_rt_task()
   // breakage follows here as rq->curr is CFS

Move an existing check to check rq->curr vs the next pushable task's
priority before getting anywhere near find_lowest_rq(). While at it, add an
explicit sched_class of rq->curr check prior to invoking
find_lowest_rq(rq->curr). Align the DL logic to also reschedule regardless
of next_task's migratability.

Fixes: a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20220127154059.974729-1-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/cpuacct: Fix charge percpu cpuusage

[ Upstream commit 248cc9993d1cc12b8e9ed716cc3fc09f6c3517dd ]

The cpuacct_account_field() is always called by the current task
itself, so it's ok to use __this_cpu_add() to charge the tick time.

But cpuacct_charge() maybe called by update_curr() in load_balance()
on a random CPU, different from the CPU on which the task is running.
So __this_cpu_add() will charge that cputime to a random incorrect CPU.

Fixes: 73e6aafd9ea8 ("sched/cpuacct: Simplify the cpuacct code")
Reported-by: Minye Zhu <zhuminye@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220220051426.5274-1-zhouchengming@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: more robust allocation failure handling in nfsd_file_cache_init

[ Upstream commit 4d2eeafecd6c83b4444db3dc0ada201c89b1aa44 ]

The nfsd file cache table can be pretty large and its allocation
may require as many as 80 contigious pages.

Employ the same fix that was employed for similar issue that was
reported for the reply cache hash table allocation several years ago
by commit 8f97514b423a ("nfsd: more robust allocation failure handling
in nfsd_reply_cache_init").

Fixes: 65294c1f2c5e ("nfsd: add a new struct file caching facility to nfsd")
Link: https://lore.kernel.org/linux-nfs/e3cdaeec85a6cfec980e87fc294327c0381c1778.camel@kernel.org/
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix missing free nid in f2fs_handle_failed_inode

[ Upstream commit 2fef99b8372c1ae3d8445ab570e888b5a358dbe9 ]

This patch fixes xfstests/generic/475 failure.

[  293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix.
[  293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[  293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[  293.691764] sh (7615): drop_caches: 3
[  293.691819] sh (7616): drop_caches: 3
[  293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read
[  293.695659] sh (7618): drop_caches: 3
[  293.696979] sh (7617): drop_caches: 3
[  293.700290] sh (7623): drop_caches: 3
[  293.708621] sh (7626): drop_caches: 3
[  293.711386] sh (7628): drop_caches: 3
[  293.711825] sh (7627): drop_caches: 3
[  293.716738] sh (7630): drop_caches: 3
[  293.719613] sh (7632): drop_caches: 3
[  293.720971] sh (7633): drop_caches: 3
[  293.727741] sh (7634): drop_caches: 3
[  293.730783] sh (7636): drop_caches: 3
[  293.732681] sh (7635): drop_caches: 3
[  293.732988] sh (7637): drop_caches: 3
[  293.738836] sh (7639): drop_caches: 3
[  293.740568] sh (7641): drop_caches: 3
[  293.743053] sh (7640): drop_caches: 3
[  293.821889] ------------[ cut here ]------------
[  293.824654] kernel BUG at fs/f2fs/node.c:3334!
[  293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G           OE     5.17.0-rc1-custom #1
[  293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[  293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs]
[  293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b
[  293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202
[  293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072
[  293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21
[  293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072
[  293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00
[  293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8
[  293.847855] FS:  00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000
[  293.850647] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0
[  293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  293.858380] Call Trace:
[  293.859302]  <TASK>
[  293.860311]  ? ttwu_do_wakeup+0x1c/0x170
[  293.861800]  ? ttwu_do_activate+0x6d/0xb0
[  293.863057]  ? _raw_spin_unlock_irqrestore+0x29/0x40
[  293.864411]  ? try_to_wake_up+0x9d/0x5e0
[  293.865618]  ? debug_smp_processor_id+0x17/0x20
[  293.866934]  ? debug_smp_processor_id+0x17/0x20
[  293.868223]  ? free_unref_page+0xbf/0x120
[  293.869470]  ? __free_slab+0xcb/0x1c0
[  293.870614]  ? preempt_count_add+0x7a/0xc0
[  293.871811]  ? __slab_free+0xa0/0x2d0
[  293.872918]  ? __wake_up_common_lock+0x8a/0xc0
[  293.874186]  ? __slab_free+0xa0/0x2d0
[  293.875305]  ? free_inode_nonrcu+0x20/0x20
[  293.876466]  ? free_inode_nonrcu+0x20/0x20
[  293.877650]  ? debug_smp_processor_id+0x17/0x20
[  293.878949]  ? call_rcu+0x11a/0x240
[  293.880060]  ? f2fs_destroy_stats+0x59/0x60 [f2fs]
[  293.881437]  ? kfree+0x1fe/0x230
[  293.882674]  f2fs_put_super+0x160/0x390 [f2fs]
[  293.883978]  generic_shutdown_super+0x7a/0x120
[  293.885274]  kill_block_super+0x27/0x50
[  293.886496]  kill_f2fs_super+0x7f/0x100 [f2fs]
[  293.887806]  deactivate_locked_super+0x35/0xa0
[  293.889271]  deactivate_super+0x40/0x50
[  293.890513]  cleanup_mnt+0x139/0x190
[  293.891689]  __cleanup_mnt+0x12/0x20
[  293.892850]  task_work_run+0x64/0xa0
[  293.894035]  exit_to_user_mode_prepare+0x1b7/0x1c0
[  293.895409]  syscall_exit_to_user_mode+0x27/0x50
[  293.896872]  do_syscall_64+0x48/0xc0
[  293.898090]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  293.899517] RIP: 0033:0x7f5a975cd25b

Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Improve consistency of allowed NUMA balance calculations

[ Upstream commit 2cfb7a1b031b0e816af7a6ee0c6ab83b0acdf05a ]

There are inconsistencies when determining if a NUMA imbalance is allowed
that should be corrected.

o allow_numa_imbalance changes types and is not always examining
  the destination group so both the type should be corrected as
  well as the naming.
o find_idlest_group uses the sched_domain's weight instead of the
  group weight which is different to find_busiest_group
o find_busiest_group uses the source group instead of the destination
  which is different to task_numa_find_cpu
o Both find_idlest_group and find_busiest_group should account
  for the number of running tasks if a move was allowed to be
  consistent with task_numa_find_cpu

Fixes: 7d2b5dd0bcc4 ("sched/numa: Allow a floating imbalance between NUMA nodes")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220208094334.16379-2-mgorman@techsingularity.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/pt: Fix address filter config for 32-bit kernel

[ Upstream commit e5524bf1047eb3b3f3f33b5f59897ba67b3ade87 ]

Change from shifting 'unsigned long' to 'u64' to prevent the config bits
being lost on a 32-bit kernel.

Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220131072453.2839535-5-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Fix address filter parser for multiple filters

[ Upstream commit d680ff24e9e14444c63945b43a37ede7cd6958f9 ]

Reset appropriate variables in the parser loop between parsing separate
filters, so that they do not interfere with parsing the next filter.

Fixes: 375637bc524952 ("perf/core: Introduce address range filtering")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220131072453.2839535-4-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rseq: Remove broken uapi field layout on 32-bit little endian

[ Upstream commit bfdf4e6208051ed7165b2e92035b4bf11f43eb63 ]

The rseq rseq_cs.ptr.{ptr32,padding} uapi endianness handling is
entirely wrong on 32-bit little endian: a preprocessor logic mistake
wrongly uses the big endian field layout on 32-bit little endian
architectures.

Fortunately, those ptr32 accessors were never used within the kernel,
and only meant as a convenience for user-space.

Remove those and replace the whole rseq_cs union by a __u64 type, as
this is the only thing really needed to express the ABI. Document how
32-bit architectures are meant to interact with this field.

Fixes: ec9c82e03a74 ("rseq: uapi: Declare rseq_cs field as union, update includes")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220127152720.25898-1-mathieu.desnoyers@efficios.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Fix iowait boost escaping uclamp restriction

[ Upstream commit d37aee9018e68b0d356195caefbb651910e0bbfa ]

iowait_boost signal is applied independently of util and doesn't take
into account uclamp settings of the rq. An io heavy task that is capped
by uclamp_max could still request higher frequency because
sugov_iowait_apply() doesn't clamp the boost via uclamp_rq_util_with()
like effective_cpu_util() does.

Make sure that iowait_boost honours uclamp requests by calling
uclamp_rq_util_with() when applying the boost.

Fixes: 982d9cdc22c9 ("sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20211216225320.2957053-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Export pelt_thermal_tp

[ Upstream commit 77cf151b7bbdfa3577b3c3f3a5e267a6c60a263b ]

We can't use this tracepoint in modules without having the symbol
exported first, fix that.

Fixes: 765047932f15 ("sched/pelt: Add support to track thermal pressure")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211028115005.873539-1-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa

[ Upstream commit 28c988c3ec29db74a1dda631b18785958d57df4f ]

The older format of /proc/pid/sched printed home node info which
required the mempolicy and task lock around mpol_get(). However
the format has changed since then and there is no need for
sched_show_numa() any more to have mempolicy argument,
asssociated mpol_get/put and task_lock/unlock. Remove them.

Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched")
Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20220118050515.2973-1-bharata@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to enable ATGC correctly via gc_idle sysfs interface

[ Upstream commit 7d19e3dab0002e527052b0aaf986e8c32e5537bf ]

It needs to assign sbi->gc_mode with GC_IDLE_AT rather than GC_AT when
user tries to enable ATGC via gc_idle sysfs interface, fix it.

Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Cc: Zhipeng Tan <tanzhipeng@hust.edu.cn>
Signed-off-by: Jicheng Shao <shaojicheng@hust.edu.cn>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watch_queue: Actually free the watch

[ Upstream commit 3d8dcf278b1ee1eff1e90be848fa2237db4c07a7 ]

free_watch() does everything barring actually freeing the watch object.  Fix
this by adding the missing kfree.

kmemleak produces a report something like the following.  Note that as an
address can be seen in the first word, the watch would appear to have gone
through call_rcu().

BUG: memory leak
unreferenced object 0xffff88810ce4a200 (size 96):
  comm "syz-executor352", pid 3605, jiffies 4294947473 (age 13.720s)
  hex dump (first 32 bytes):
    e0 82 48 0d 81 88 ff ff 00 00 00 00 00 00 00 00  ..H.............
    80 a2 e4 0c 81 88 ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8214e6cc>] kmalloc include/linux/slab.h:581 [inline]
    [<ffffffff8214e6cc>] kzalloc include/linux/slab.h:714 [inline]
    [<ffffffff8214e6cc>] keyctl_watch_key+0xec/0x2e0 security/keys/keyctl.c:1800
    [<ffffffff8214ec84>] __do_sys_keyctl+0x3c4/0x490 security/keys/keyctl.c:2016
    [<ffffffff84493a25>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84493a25>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-and-tested-by: syzbot+6e2de48f06cdb2884bfc@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watch_queue: Fix NULL dereference in error cleanup

[ Upstream commit a635415a064e77bcfbf43da413fd9dfe0bbed9cb ]

In watch_queue_set_size(), the error cleanup code doesn't take account of
the fact that __free_page() can't handle a NULL pointer when trying to free
up buffer pages that did get allocated.

Fix this by only calling __free_page() on the pages actually allocated.

Without the fix, this can lead to something like the following:

BUG: KASAN: null-ptr-deref in __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473
Read of size 4 at addr 0000000000000034 by task syz-executor168/3599
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 __kasan_report mm/kasan/report.c:446 [inline]
 kasan_report.cold+0x66/0xdf mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
 instrument_atomic_read include/linux/instrumented.h:71 [inline]
 atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline]
 page_ref_count include/linux/page_ref.h:67 [inline]
 put_page_testzero include/linux/mm.h:717 [inline]
 __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473
 watch_queue_set_size+0x499/0x630 kernel/watch_queue.c:275
 pipe_ioctl+0xac/0x2b0 fs/pipe.c:632
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-and-tested-by: syzbot+d55757faa9b80590767b@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: terminate manual loop iterator loop correctly for non-vecs

[ Upstream commit 5e929367468c8f97cd1ffb0417316cecfebef94b ]

The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.

Reported-by: Joel Jaeschke <joel.jaeschke@gmail.com>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7ec0 ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't check unrelated req->open.how in accept request

[ Upstream commit adf3a9e9f556613197583a1884f0de40a8bb6fb9 ]

Looks like a victim of too much copy/paste, we should not be looking
at req->open.how in accept. The point is to check CLOEXEC and error
out, which we don't invalid direct descriptors on exec. Hence any
attempt to get a direct descriptor with CLOEXEC is invalid.

No harm is done here, as req->open.how.flags overlaps with
req->accept.flags, but it's very confusing and might change if either of
those command structs are modified.

Fixes: aaa4db12ef7b ("io_uring: accept directly into fixed file table")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource: acpi_pm: fix return value of __setup handler

[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.

The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.

Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus) Add Vin unit off handling

[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ]

If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.

Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.

If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com
Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
[groeck: Dropped unnecessary ()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: nomadik - Change clk_disable to clk_disable_unprepare

[ Upstream commit 7f0f1f3ef62ed7a40e30aff28115bd94c4211d1d ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable_unprepare.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: beca35d05cc2 ("hwrng: nomadik - use clk_prepare_enable()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - Fix use after free in cc_cipher_exit()

[ Upstream commit 3d950c34074ed74d2713c3856ba01264523289e6 ]

kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But
ctx_p->user.key is still used in the next line, which will lead to a
use after free.

We can call kfree_sensitive() after dev_dbg() to avoid the uaf.

Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - ccp_dmaengine_unregister release dma channels

[ Upstream commit 54cce8ecb9254f971b40a72911c6da403720a2d2 ]

ccp_dmaengine_register adds dma_chan->device_node to dma_dev->channels list
but ccp_dmaengine_unregister didn't remove them.
That can cause crashes in various dmaengine methods that tries to use dma_dev->channels

Fixes: 58ea8abf4904 ("crypto: ccp - Register the CCP as a DMA...")
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: APEI: fix return value of __setup handlers

[ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').

Unknown kernel command line parameters "erst_disable
  bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
  passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
     erst_disable
     bert_disable
     hest_disable
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6

Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support")
Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support")
Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: trusted: Avoid calling null function trusted_key_exit

[ Upstream commit c5d1ed846e15090bc90dfdaafc07eac066e070bb ]

If one loads and unloads the trusted module, trusted_key_exit can be
NULL. Call it through static_call_cond() to avoid a kernel trap.

Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: trusted: Fix trusted key backends when building as module

[ Upstream commit 969a26446bcd142faedfe8c6f41cd7668596c1fa ]

Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.

When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.

Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: prevent instrumentation of bp hardening callbacks

[ Upstream commit 614c0b9fee711dd89b1dd65c88ba83612a373fdc ]

We may call arm64_apply_bp_hardening() early during entry (e.g. in
el0_ia()) before it is safe to run instrumented code. Unfortunately this
may result in running instrumented code in two cases:

* The hardening callbacks called by arm64_apply_bp_hardening() are not
  marked as `noinstr`, and have been observed to be instrumented when
  compiled with either GCC or LLVM.

* Since arm64_apply_bp_hardening() itself is only marked as `inline`
  rather than `__always_inline`, it is possible that the compiler
  decides to place it out-of-line, whereupon it may be instrumented.

For example, with defconfig built with clang 13.0.0,
call_hvc_arch_workaround_1() is compiled as:

| <call_hvc_arch_workaround_1>:
|        d503233f        paciasp
|        f81f0ffe        str     x30, [sp, #-16]!
|        320183e0        mov     w0, #0x80008000
|        d503201f        nop
|        d4000002        hvc     #0x0
|        f84107fe        ldr     x30, [sp], #16
|        d50323bf        autiasp
|        d65f03c0        ret

... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as:

| <call_hvc_arch_workaround_1>:
|        d503245f        bti     c
|        d503201f        nop
|        d503201f        nop
|        d503233f        paciasp
|        a9bf7bfd        stp     x29, x30, [sp, #-16]!
|        910003fd        mov     x29, sp
|        94000000        bl      0 <__sanitizer_cov_trace_pc>
|        320183e0        mov     w0, #0x80008000
|        d503201f        nop
|        d4000002        hvc     #0x0
|        a8c17bfd        ldp     x29, x30, [sp], #16
|        d50323bf        autiasp
|        d65f03c0        ret

... with a patchable function entry registered with ftrace, and a direct
call to __sanitizer_cov_trace_pc(). Neither of these are safe early
during entry sequences.

This patch avoids the unsafe instrumentation by marking
arm64_apply_bp_hardening() as `__always_inline` and by marking the
hardening functions as `noinstr`. This avoids the potential for
instrumentation, and causes clang to consistently generate the function
as with the defconfig sample.

Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to
the stack without being placed in a frame record, which will result in a
missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is
true of qcom_link_stack_sanitisation(), where inline asm spills the LR
to a GPR prior to corrupting it. This is not a significant issue
presently as we will only backtrace here if an exception is taken, and
in such cases we may omit entries for other reasons today.

The relevant hardening functions were introduced in commits:

  ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor")
  b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")

... and these were subsequently moved in commit:

  d4647f0a2ad71110 ("arm64: Rewrite Spectre-v2 mitigation code")

The arm64_apply_bp_hardening() function was introduced in commit:

  0f15adbb2861ce6f ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")

... and was subsequently moved and reworked in commit:

  6279017e807708a0 ("KVM: arm64: Move BP hardening helpers into spectre.h")

Fixes: ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor")
Fixes: b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Fixes: d4647f0a2ad71110 ("arm64: Rewrite Spectre-v2 mitigation code")
Fixes: 0f15adbb2861ce6f ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
Fixes: 6279017e807708a0 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220224181028.512873-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()

[ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ]

of_base->base can either be iomapped using of_io_request_and_map() or
of_iomap() depending whether or not an of_base->name has been set.

Thus check of_base->base against NULL as of_iomap() does not return a
PTR_ERR() in case of error.

Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name")
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-microchip-pit64b: Use notrace

[ Upstream commit ff10ee97cb203262e88d9c8bc87369cbd4004a0c ]

Use notrace for mchp_pit64b_sched_read_clk() to avoid recursive call of
prepare_ftrace_return() when issuing:
echo function_graph > /sys/kernel/debug/tracing/current_tracer

Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220304133601.2404086-3-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts

[ Upstream commit ab8da93dc06d82f464c47ab30e6c75190702f369 ]

The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.

Validate the interrupts coming from DTS to avoid this.  This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.

Fixes: 36ba5d527e95 ("ARM: EXYNOS: add device tree support for MCT controller driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220220103815.135380-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/exynos_mct: Refactor resources allocation

[ Upstream commit 7cd925a8823d16de5614d3f0aabea9948747accd ]

Move interrupts allocation from exynos4_timer_resources() into separate
function together with the interrupt number parsing code from
mct_init_dt(), so the code for managing interrupts is kept together.
While touching exynos4_timer_resources() function, move of_iomap() to it.
No functional changes.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211101193531.15078-2-semen.protsenko@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix

[ Upstream commit bceaae3bac0ce27c549bb050336d8d08abc2ee54 ]

The existing fix for errata i940 causes a conflict for IPU2 which is
using timer 3 and 4. From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:

  &ipu2 {
          mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
          ti,timers = <&timer3>;
          ti,watchdog-timers = <&timer4>, <&timer9>;
  };

The conflict was noticed when booting mainline on the BeagleBoard X15
which has a TI AM5728 SoC:

  remoteproc remoteproc1: 55020000.ipu is available
  remoteproc remoteproc1: powering up 55020000.ipu
  remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4
  omap-rproc 55020000.ipu: could not get timer platform device
  omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
  remoteproc remoteproc1: can't start rproc 55020000.ipu: -19

This change modifies the errata fix to instead use timer 15 and 16 which
resolves the timer conflict.

It does not appear to introduce any latency regression. Results from
cyclictest with original errata fix using dmtimer 3 and 4:

  # cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
  policy: fifo: loadavg: 0.02 0.03 0.05

  T: 0 ( 1449) P:80 I:200 C: 800368 Min:   0 Act:   32 Avg:   22 Max:  128
  T: 1 ( 1450) P:80 I:200 C: 800301 Min:   0 Act:   12 Avg:   23 Max:   70

The results after the change to dmtimer 15 and 16:

  # cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
  policy: fifo: loadavg: 0.36 0.19 0.07

  T: 0 ( 1711) P:80 I:200 C: 759599 Min:   0 Act:    6 Avg:   22 Max:  108
  T: 1 ( 1712) P:80 I:200 C: 759539 Min:   0 Act:   19 Avg:   23 Max:   79

Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Link: https://lore.kernel.org/linux-omap/YfWsG0p6to3IJuvE@x1/
Suggested-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20220204053503.1409162-1-dfustini@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: vmx - add missing dependencies

[ Upstream commit 647d41d3952d726d4ae49e853a9eff68ebad3b3f ]

vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.

These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):

[    0.540953] Failed to allocate xts(aes) fallback: -2
[    0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[    0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[    0.544440] Failed to allocate ctr(aes) fallback: -2
[    0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[    0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[    0.547992] Failed to allocate cbc(aes) fallback: -2
[    0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[    0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[    0.550745] Failed to allocate transformation for 'aes': -2
[    0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[    0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)

Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64")

Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: gemini - call finalize with bh disabled

[ Upstream commit 7f22421103c5a7f9a1726f0ed125274c38174ddb ]

Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.

Fixes: 46c5338db7bd45b2 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: amlogic - call finalize with bh disabled

[ Upstream commit dba633342994ce47d347bcf5522ba28301247b79 ]

Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.

Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ce - call finalize with bh disabled

[ Upstream commit f75a749b6d78aeae2ce90e14fcc4b7b3ba46126d ]

Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.

Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - call finalize with bh disabled

[ Upstream commit b169b3766242b6f3336e24a6c8ee1522978b57a7 ]

Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.

Fixes: f08fcced6d00 ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: atmel - disable trng on failure path

[ Upstream commit a223ea9f89ab960eb254ba78429efd42eaf845eb ]

Call atmel_trng_disable() on failure path of probe.

Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-zynqmp-gqspi: Handle error for dma_set_mask

[ Upstream commit 13262fc26c1837c51a5131dbbdd67a2387f8bfc7 ]

As the potential failure of the dma_set_mask(),
it should be better to check it and return error
if fails.

Fixes: 126bdb606fd2 ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220302092051.121343-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: suspend: fix return value of __setup handler

[ Upstream commit 7a64ca17e4dd50d5f910769167f3553902777844 ]

If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.

  Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
    test_suspend=invalid"

and

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     test_suspend=invalid

Fixes: 2ce986892faf ("PM / sleep: Enhance test_suspend option with repeat capability")
Fixes: 27ddcc6596e5 ("PM / sleep: Add state field to pm_states[] entries")
Fixes: a9d7052363a6 ("PM: Separate suspend to RAM functionality from core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: fix __setup handler error handling

[ Upstream commit ba7ffcd4c4da374b0f64666354eeeda7d3827131 ]

If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.

Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: don't delete queue kobject before its children

[ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ]

kobjects aren't supposed to be deleted before their child kobjects are
deleted.  Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:

    sysfs group 'modes' not found for kobject 'crypto'
    WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
    ...
    Call Trace:
      sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
      __kobject_del+0x20/0x80 lib/kobject.c:611
      kobject_cleanup+0xa4/0x140 lib/kobject.c:696
      kobject_release lib/kobject.c:736 [inline]
      kref_put include/linux/kref.h:65 [inline]
      kobject_put+0x53/0x70 lib/kobject.c:753
      blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
      blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
      del_gendisk+0x117/0x250 block/genhd.c:610

Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place.

Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix the check for duplicate unique identifiers

[ Upstream commit e2724cb9f0c406b8fb66efd3aa9e8b3edfd8d5c8 ]

nvme_subsys_check_duplicate_ids should needs to return an error if any of
the identifiers matches, not just if all of them match.  But it does not
need to and should not look at the CSI value for this sanity check.

Rewrite the logic to be separate from nvme_ns_ids_equal and optimize it
by reducing duplicate checks for non-present identifiers.

Fixes: ed754e5deeb1 ("nvme: track shared namespaces")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: cleanup __nvme_check_ids

[ Upstream commit fd8099e7918cd2df39ef306dd1d1af7178a15b81 ]

Pass the actual nvme_ns_ids used for the comparison instead of the
ns_head that isn't needed and use a more descriptive function name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING

[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ]

If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.

Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.

Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus) Add mutex to regulator ops

[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ]

On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.

Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io
Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support")
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx-pci: Balance reference count for PCI DMA device

[ Upstream commit 609d7ffdc42199a0ec949db057e3b4be6745d6c5 ]

The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().

Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function")
Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield")
Reported-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223191637.31147-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/sec - fix the aead software fallback for engine

[ Upstream commit 0a2a464f863187f97e96ebc6384c052cafd4a54c ]

Due to the subreq pointer misuse the private context memory. The aead
soft crypto occasionally casues the OS panic as setting the 64K page.
Here is fix it.

Fixes: 6c46a3297bea ("crypto: hisilicon/sec - add fallback tfm...")
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - don't attempt 0 len DMA mappings

[ Upstream commit 1fb37b5692c915edcc2448a6b37255738c7c77e0 ]

Refuse to try mapping zero bytes as this may cause a fault
on some configurations / platforms and it seems the prev.
attempt is not enough and we need to be more explicit.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL
scatterlists")
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EVM: fix the evm= __setup handler return value

[ Upstream commit f2544f5e6c691679d56bb38637d2f347075b36fa ]

__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.

Using the documented string "evm=fix" causes an Unknown parameter message:
  Unknown kernel command line parameters
  "BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.

and that string is added to init's environment string space:
  Run /sbin/init as init process
    with arguments:
     /sbin/init
    with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     evm=fix

With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
  evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.

Fixes: 7102ebcd65c1 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit: log AUDIT_TIME_* records only from rules

[ Upstream commit 272ceeaea355214b301530e262a0df8600bfca95 ]

AUDIT_TIME_* events are generated when there are syscall rules present
that are not related to time keeping.  This will produce noisy log
entries that could flood the logs and hide events we really care about.

Rather than immediately produce the AUDIT_TIME_* records, store the data
in the context and log it at syscall exit time respecting the filter
rules.

Note: This eats the audit_buffer, unlike any others in show_special().

Please see https://bugzilla.redhat.com/show_bug.cgi?id=1991919

Fixes: 7e8eda734d30 ("ntp: Audit NTP parameters adjustment")
Fixes: 2d87a0674bd6 ("timekeeping: Audit clock adjustments")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed style/whitespace issues]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - ECB does not need IV

[ Upstream commit 973d74e93820d99d8ea203882631c76edab699c9 ]

When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/sgx: Treat CC as one argument

[ Upstream commit 6170abb21e2380477080b25145da9747ad467d3d ]

CC can have multiple sub-strings like "ccache gcc". For check_cc.sh,
CC needs to be treated like one argument. Put double quotes around it to
make CC one string and hence one argument.

Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-3-usama.anjum@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/x86: Add validity check and allow field splitting

[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ]

Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.

Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: set blkg iostat after percpu stat aggregation

[ Upstream commit f122d103b564e5fb7c82de902c6f8f6cbdf50ec9 ]

Don't need to do blkg_iostat_set for top blkg iostat on each CPU,
so move it after percpu stat aggregation.

Fixes: ef45fe470e1e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220213085902.88884-1-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64/mm: avoid fixmap race condition when create pud mapping

[ Upstream commit ee017ee353506fcec58e481673e4331ff198a80e ]

The 'fixmap' is a global resource and is used recursively by
create pud mapping(), leading to a potential race condition in the
presence of a concurrent call to alloc_init_pud():

kernel_init thread                          virtio-mem workqueue thread
==================                          ===========================

  alloc_init_pud(...)                       alloc_init_pud(...)
  pudp = pud_set_fixmap_offset(...)         pudp = pud_set_fixmap_offset(...)
  READ_ONCE(*pudp)
  pud_clear_fixmap(...)
                                            READ_ONCE(*pudp) // CRASH!

As kernel may sleep during creating pud mapping, introduce a mutex lock to
serialise use of the fixmap entries by alloc_init_pud(). However, there is
no need for locking in early boot stage and it doesn't work well with
KASLR enabled when early boot. So, enable lock when system_state doesn't
equal to "SYSTEM_BOOTING".

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f4710445458c ("arm64: mm: use fixmap when creating page tables")
Link: https://lore.kernel.org/r/20220201114400.56885-1-jianyong.wu@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stack: Constrain and fix stack offset randomization with Clang builds

[ Upstream commit efa90c11f62e6b7252fb75efe2787056872a627c ]

All supported versions of Clang perform auto-init of __builtin_alloca()
when stack auto-init is on (CONFIG_INIT_STACK_ALL_{ZERO,PATTERN}).

add_random_kstack_offset() uses __builtin_alloca() to add a stack
offset. This means, when CONFIG_INIT_STACK_ALL_{ZERO,PATTERN} is
enabled, add_random_kstack_offset() will auto-init that unused portion
of the stack used to add an offset.

There are several problems with this:

1. These offsets can be as large as 1023 bytes. Performing
   memset() on them isn't exactly cheap, and this is done on
   every syscall entry.

2. Architectures adding add_random_kstack_offset() to syscall
   entry implemented in C require them to be 'noinstr' (e.g. see
   x86 and s390). The potential problem here is that a call to
   memset may occur, which is not noinstr.

A x86_64 defconfig kernel with Clang 11 and CONFIG_VMLINUX_VALIDATION shows:

 | vmlinux.o: warning: objtool: do_syscall_64()+0x9d: call to memset() leaves .noinstr.text section
 | vmlinux.o: warning: objtool: do_int80_syscall_32()+0xab: call to memset() leaves .noinstr.text section
 | vmlinux.o: warning: objtool: __do_fast_syscall_32()+0xe2: call to memset() leaves .noinstr.text section
 | vmlinux.o: warning: objtool: fixup_bad_iret()+0x2f: call to memset() leaves .noinstr.text section

Clang 14 (unreleased) will introduce a way to skip alloca initialization
via __builtin_alloca_uninitialized() (https://reviews.llvm.org/D115440).

Constrain RANDOMIZE_KSTACK_OFFSET to only be enabled if no stack
auto-init is enabled, the compiler is GCC, or Clang is version 14+. Use
__builtin_alloca_uninitialized() if the compiler provides it, as is done
by Clang 14.

Link: https://lkml.kernel.org/r/YbHTKUjEejZCLyhX@elver.google.com
Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220131090521.1947110-2-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>