Stefan Hajnoczi [Thu, 24 Nov 2016 09:50:32 +0000 (09:50 +0000)]
Merge remote-tracking branch 'rth/tags/pull-axp-
20161123' into staging
Fix alpha smp interrupt masking
# gpg: Signature made Wed 23 Nov 2016 12:42:45 PM GMT
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* rth/tags/pull-axp-
20161123:
target-alpha: Fix interrupt mask for cpu1
Message-id:
1479905195-7424-1-git-send-email-rth@twiddle.net
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 23 Nov 2016 11:46:15 +0000 (11:46 +0000)]
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.8-
20161123' into staging
ppc patch queue 2016-11-23
Here's the first set of 2.8 hard freeze bugfixes for ppc.
The biggest thing here is a batch of fixes for migration breakages in
both 2.7 and current 2.8. Alas, there is at least one more migration
problem, which prevents memory unplug after a migration. I hoped to
include a fix for that here, but it turned out to have some problems
bigger than those it was solving. So, I expect at least one more hard
freeze pull request.
There are also a few other assorted bug fixes.
# gpg: Signature made Wed 23 Nov 2016 02:25:42 AM GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.8-
20161123:
spapr: Fix 2.7<->2.8 migration of PCI host bridge
Revert "spapr: Fix migration of PCI host bridges from qemu-2.7"
target-ppc: Allow eventual removal of old migration mistakes
migration: Add VMSTATE_UINTTL_TEST()
target-ppc: Fix CPU migration from qemu-2.6 <-> later versions
ppc: Make uninorth interrupt swizzling identical to Grackle
target-ppc: fix index array of national digits
hw/char/spapr_vty: Return amount of free buffer entries in vty_can_receive()
ppc: BOOK3E: nothing should be done when MSR:PR is set
spapr: migration support for CAS-negotiated option vectors
tests/postcopy: Use KVM on ppc64 only if it is KVM-HV
Message-id:
1479869383-16162-1-git-send-email-david@gibson.dropbear.id.au
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 23 Nov 2016 11:44:29 +0000 (11:44 +0000)]
Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
Small fixes for rc1.
# gpg: Signature made Tue 22 Nov 2016 10:26:56 PM GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* bonzini/tags/for-upstream:
scsi/esp: do not raise an interrupt when reading the FIFO register
nbd: Allow unmap and fua during write zeroes
cpu_ldst.h: use correct guest address parameter
Message-id:
1479853676-35995-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
David Gibson [Tue, 22 Nov 2016 23:26:38 +0000 (10:26 +1100)]
spapr: Fix 2.7<->2.8 migration of PCI host bridge
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration
from qemu-2.7 to the current version. It split the device's MMIO
window into two pieces for 32-bit and 64-bit MMIO.
The patch included backwards compatibility code to convert the old
property into the new format. However, the property value was also
transferred in the migration stream and compared with a (probably
unwise) VMSTATE_EQUAL. So, the "raw" value from 2.7 is compared to
the new style converted value from (pre-)2.8 giving a mismatch and
migration failure.
Along with the actual field that caused the breakage, there are
several other ill-advised VMSTATE_EQUAL()s. To fix forwards
migration, we read the values in the stream into scratch variables and
ignore them, instead of comparing for equality. To fix backwards
migration, we populate those scratch variables in pre_save() with
adjusted values to match the old behaviour.
To permit the eventual possibility of removing this cruft from the
stream, we only include these compatibility fields if a new
'pre-2.8-migration' property is set. We clear it on the pseries-2.8
machine type, which obviously can't be migrated backwards, but set it
on earlier machine type versions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
David Gibson [Mon, 21 Nov 2016 01:12:10 +0000 (12:12 +1100)]
Revert "spapr: Fix migration of PCI host bridges from qemu-2.7"
This reverts commit
9b54ca0ba781012eeea4237b7c4832ba2ea81d89.
The commit above corrected a migration breakage between qemu-2.7 and
qemu-2.8. However it did so by advancing the migration version for
the PCI host bridge, which obviously breaks migration backwards to
earlier qemu versions.
Although it's not totally essential, we'd like to maintain the
possibility for backwards migration, so revert the change in
preparation for a better fix.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
David Gibson [Mon, 21 Nov 2016 05:29:30 +0000 (16:29 +1100)]
target-ppc: Allow eventual removal of old migration mistakes
Until very recently, the vmstate for ppc cpus included some poorly
thought out VMSTATE_EQUAL() components, that can easily break
migration compatibility, and did so between qemu-2.6 and later
versions. A hack was recently added which fixes this migration
breakage, but it leaves the unhelpful cruft of these fields in the
migration stream.
This patch adds a new cpu property allowing these fields to be removed
from the stream entirely. For the pseries-2.8 machine type - which
comes after the fix - and for all non-pseries machine types - which
aren't mature enough to care about cross-version migration - we remove
the fields from the stream.
For pseries-2.7 and earlier, The migration hack remains in place,
allowing backwards and forwards migration with the older machine
types.
This restricts the migration compatibility cruft to older machine
types, and at least opens the possibility of eventually deprecating
and removing it entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
David Gibson [Sun, 20 Nov 2016 23:50:02 +0000 (10:50 +1100)]
migration: Add VMSTATE_UINTTL_TEST()
include/migration/cpu.h defines VMSTATE_UINTTL() and several variants
for migrating target_ulong fields. It's defined in terms of
VMSTATE_UINT32() or VMSTATE_UINT64() as appropriate.
It doesn't, however, include a VMSTATE_UINTTL_TEST() variant, which
I'm going to need shortly. So, add it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Mon, 21 Nov 2016 05:28:12 +0000 (16:28 +1100)]
target-ppc: Fix CPU migration from qemu-2.6 <-> later versions
When migration for target-ppc was converted to vmstate, several
VMSTATE_EQUAL() checks were foolishly included of things that really
should be internal state. Specifically we verified equality of the
insns_flags and insns_flags2 fields, which are used within TCG to
determine which groups of instructions are available on this cpu
model. Between qemu-2.6 and qemu-2.7 we made some changes to these
classes which broke migration.
This path fixes migration both forwards and backwards. On migration
from 2.6 to later versions we import the fields into teporary
variables, which we then ignore. In migration backwards, we populate
the temporary fields from the runtime fields, but mask out the bits
which were added after qemu-2.6, allowing the VMSTATE_EQUAL in
qemu-2.6 to accept the stream.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Benjamin Herrenschmidt [Sun, 20 Nov 2016 14:12:31 +0000 (00:12 +1000)]
ppc: Make uninorth interrupt swizzling identical to Grackle
It's currently broken as it uses an incorrect shift, it tries
to use the slot number but uses the top bits of the bus number
instead.
Note: Neither implementation matches what OpenBIOS ends up putting
in the device-tree either, which will have to be fixed separately.
This is not quite correct for modelling a real Mac since Apple
tend to tie all 4 interrupt lines of a slot together and have
separate interrupts for every slot and every motherboard devices
going straight to the PIC but we'll sort that out later.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Jose Ricardo Ziviani [Mon, 21 Nov 2016 14:55:13 +0000 (12:55 -0200)]
target-ppc: fix index array of national digits
Fixes the big endian array access of national digits, from commits
b815587 and e2106d7.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Fri, 18 Nov 2016 09:09:37 +0000 (10:09 +0100)]
hw/char/spapr_vty: Return amount of free buffer entries in vty_can_receive()
The can_receive() callbacks of the character devices should return
the amount of characters that can be accepted at once, not just a
boolean value (which rather means only one character at a time).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Vladimir Svoboda [Thu, 17 Nov 2016 13:49:48 +0000 (14:49 +0100)]
ppc: BOOK3E: nothing should be done when MSR:PR is set
The server architecture (BOOK3S) specifies that any instruction that
sets MSR:PR will also set MSR:EE, IR and DR.
However there is no such behavior specification for the embedded
architecture (BOOK3E).
Signed-off-by: Vladimir Svoboda <ze.vlad@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Michael Roth [Fri, 18 Nov 2016 01:40:27 +0000 (19:40 -0600)]
spapr: migration support for CAS-negotiated option vectors
With the additional of the OV5_HP_EVT option vector, we now have
certain functionality (namely, memory unplug) that checks at run-time
for whether or not the guest negotiated the option via CAS. Because
we don't currently migrate these negotiated values, we are unable
to unplug memory from a guest after it's been migrated until after
the guest is rebooted and CAS-negotiation is repeated.
This patch fixes this by adding CAS-negotiated options to the
migration stream. We do this using a subsection, since the
negotiated value of OV5_HP_EVT is the only option currently needed
to maintain proper functionality for a running guest.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Wed, 16 Nov 2016 08:39:31 +0000 (09:39 +0100)]
tests/postcopy: Use KVM on ppc64 only if it is KVM-HV
The ppc64 postcopy test does not work with KVM-PR, and it is also
causing annoying warning messages when run on a x86 host. So let's
use KVM here only if we know that we're running with KVM-HV (which
automatically also means that we're running on a ppc64 host), and
fall back to TCG otherwise.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Stefan Hajnoczi [Tue, 22 Nov 2016 22:29:08 +0000 (22:29 +0000)]
Update version for v2.8.0-rc1 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hervé Poussineau [Fri, 18 Nov 2016 22:33:17 +0000 (23:33 +0100)]
scsi/esp: do not raise an interrupt when reading the FIFO register
This fixes SCSI adapter self-tests done in MIPS Jazz emulation,
broken since
ff589551c8e8e9e95e211b9d8daafb4ed39f1aec.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <
1479508397-8443-1-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eric Blake [Thu, 17 Nov 2016 20:13:54 +0000 (14:13 -0600)]
nbd: Allow unmap and fua during write zeroes
Commit
fa778fff wired up support to send the NBD_CMD_WRITE_ZEROES,
but forgot to inform the block layer that FUA unmapping of zeroes is
supported. Without BDRV_REQ_MAY_UNMAP listed as a supported flag,
the block layer will always insist on the NBD layer passing
NBD_CMD_FLAG_NO_HOLE, resulting in the server always allocating
things even when it was desired to let the server punch holes.
Similarly, failing to set BDRV_REQ_FUA means that the client may
send unnecessary NBD_CMD_FLUSH when it could have instead used the
NBD_CMD_FLAG_FUA bit.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1479413642-22463-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bobby Bingham [Sun, 13 Nov 2016 05:05:23 +0000 (23:05 -0600)]
cpu_ldst.h: use correct guest address parameter
In the user emulation code path, tlb_vaddr_to_host erronesously passed
vaddr as the guest address to be translated, instead of addr, the parameter
which actually contained the guest address.
This resulted in incorrect addresses being used when emulating block copy
(mvc/mvpg) and block clear (xc) instructions for the s390x target.
Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Message-Id: <
20161113050523.23909-1-koorogi@koorogi.info>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Hajnoczi [Tue, 22 Nov 2016 19:30:39 +0000 (19:30 +0000)]
Merge remote-tracking branch 'sstabellini/tags/xen-
20161122-tag' into staging
Xen 2016/11/22
# gpg: Signature made Tue 22 Nov 2016 06:41:23 PM GMT
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* sstabellini/tags/xen-
20161122-tag:
xen: attach pvusb usb bus to backend qdev
xen: create qdev for each backend device
qdev: add function qdev_set_id()
xen: add an own bus for xen backend devices
xen: fix ioreq handling
Message-id: alpine.DEB.2.10.
1611221037010.21858@sstabellini-ThinkPad-X260
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 22 Nov 2016 19:30:03 +0000 (19:30 +0000)]
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches for 2.8.0-rc1
# gpg: Signature made Tue 22 Nov 2016 03:55:38 PM GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream:
block: Pass unaligned discard requests to drivers
block: Return -ENOTSUP rather than assert on unaligned discards
block: Let write zeroes fallback work even with small max_transfer
qcow2: Inform block layer about discard boundaries
Message-id:
1479830693-26676-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 22 Nov 2016 19:29:29 +0000 (19:29 +0000)]
Merge remote-tracking branch 'kraxel/tags/pull-seabios-
20161122-1' into staging
seabios: update to 1.10.1 stable release
# gpg: Signature made Tue 22 Nov 2016 09:12:39 AM GMT
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* kraxel/tags/pull-seabios-
20161122-1:
seabios: update to 1.10.1 stable release
Message-id:
1479806144-25599-1-git-send-email-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Juergen Gross [Tue, 22 Nov 2016 06:10:59 +0000 (07:10 +0100)]
xen: attach pvusb usb bus to backend qdev
Attach the usb bus of a new pvusb controller to the qdev associated
with the Xen backend. Any device connected to that controller can now
specify the bus and port directly via its properties.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Juergen Gross [Tue, 22 Nov 2016 06:10:58 +0000 (07:10 +0100)]
xen: create qdev for each backend device
Create a qdev plugged to the xen-sysbus for each new backend device.
This device can be used as a parent for all needed devices of that
backend. The id of the new device will be "xen-<type>-<dev>" with
<type> being the xen backend type (e.g. "qdisk") and <dev> the xen
backend number of the type under which it is to be found in xenstore.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Juergen Gross [Tue, 22 Nov 2016 06:10:57 +0000 (07:10 +0100)]
qdev: add function qdev_set_id()
In order to have an easy way to add a new qdev with a specific id
carve out the needed functionality from qdev_device_add() into a new
function qdev_set_id().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Juergen Gross [Tue, 22 Nov 2016 06:10:56 +0000 (07:10 +0100)]
xen: add an own bus for xen backend devices
Add a bus for Xen backend devices in order to be able to establish a
dedicated device path for pluggable devices.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Jan Beulich [Tue, 22 Nov 2016 12:56:51 +0000 (05:56 -0700)]
xen: fix ioreq handling
Avoid double fetches and bounds check size to avoid overflowing
internal variables.
This is CVE-2016-9381 / XSA-197.
Reported-by: yanghongke <yanghongke@huawei.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Richard Henderson [Tue, 22 Nov 2016 15:53:53 +0000 (16:53 +0100)]
target-alpha: Fix interrupt mask for cpu1
A typo prevents ISA interrupts from being recognized on cpu0,
which is where the smp kernel normally wants to see them.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Eric Blake [Thu, 17 Nov 2016 20:13:58 +0000 (14:13 -0600)]
block: Pass unaligned discard requests to drivers
Discard is advisory, so rounding the requests to alignment
boundaries is never semantically wrong from the data that
the guest sees. But at least the Dell Equallogic iSCSI SANs
has an interesting property that its advertised discard
alignment is 15M, yet documents that discarding a sequence
of 1M slices will eventually result in the 15M page being
marked as discarded, and it is possible to observe which
pages have been discarded.
Between commits 9f1963b and
b8d0a980, we converted the block
layer to a byte-based interface that ultimately ignores any
unaligned head or tail based on the driver's advertised
discard granularity, which means that qemu 2.7 refuses to
pass any discard request smaller than 15M down to the Dell
Equallogic hardware. This is a slight regression in behavior
compared to earlier qemu, where a guest executing discards
in power-of-2 chunks used to be able to get every page
discarded, but is now left with various pages still allocated
because the guest requests did not align with the hardware's
15M pages.
Since the SCSI specification says nothing about a minimum
discard granularity, and only documents the preferred
alignment, it is best if the block layer gives the driver
every bit of information about discard requests, rather than
rounding it to alignment boundaries early.
Rework the block layer discard algorithm to mirror the write
zero algorithm: always peel off any unaligned head or tail
and manage that in isolation, then do the bulk of the request
on an aligned boundary. The fallback when the driver returns
-ENOTSUP for an unaligned request is to silently ignore that
portion of the discard request; but for devices that can pass
the partial request all the way down to hardware, this can
result in the hardware coalescing requests and discarding
aligned pages after all.
Reported by: Peter Lieven <pl@kamp.de>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eric Blake [Thu, 17 Nov 2016 20:13:57 +0000 (14:13 -0600)]
block: Return -ENOTSUP rather than assert on unaligned discards
Right now, the block layer rounds discard requests, so that
individual drivers are able to assert that discard requests
will never be unaligned. But there are some ISCSI devices
that track and coalesce multiple unaligned requests, turning it
into an actual discard if the requests eventually cover an
entire page, which implies that it is better to always pass
discard requests as low down the stack as possible.
In isolation, this patch has no semantic effect, since the
block layer currently never passes an unaligned request through.
But the block layer already has code that silently ignores
drivers that return -ENOTSUP for a discard request that cannot
be honored (as well as drivers that return 0 even when nothing
was done). But the next patch will update the block layer to
fragment discard requests, so that clients are guaranteed that
they are either dealing with an unaligned head or tail, or an
aligned core, making it similar to the block layer semantics of
write zero fragmentation.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eric Blake [Thu, 17 Nov 2016 20:13:56 +0000 (14:13 -0600)]
block: Let write zeroes fallback work even with small max_transfer
Commit
443668ca rewrote the write_zeroes logic to guarantee that
an unaligned request never crosses a cluster boundary. But
in the rewrite, the new code assumed that at most one iteration
would be needed to get to an alignment boundary.
However, it is easy to trigger an assertion failure: the Linux
kernel limits loopback devices to advertise a max_transfer of
only 64k. Any operation that requires falling back to writes
rather than more efficient zeroing must obey max_transfer during
that fallback, which means an unaligned head may require multiple
iterations of the write fallbacks before reaching the aligned
boundaries, when layering a format with clusters larger than 64k
atop the protocol of file access to a loopback device.
Test case:
$ qemu-img create -f qcow2 -o cluster_size=1M file 10M
$ losetup /dev/loop2 /path/to/file
$ qemu-io -f qcow2 /dev/loop2
qemu-io> w 7m 1k
qemu-io> w -z 8003584 2093056
In fairness to Denis (as the original listed author of the culprit
commit), the faulty logic for at most one iteration is probably all
my fault in reworking his idea. But the solution is to restore what
was in place prior to that commit: when dealing with an unaligned
head or tail, iterate as many times as necessary while fragmenting
the operation at max_transfer boundaries.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
CC: qemu-stable@nongnu.org
CC: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eric Blake [Thu, 17 Nov 2016 20:13:55 +0000 (14:13 -0600)]
qcow2: Inform block layer about discard boundaries
At the qcow2 layer, discard is only possible on a per-cluster
basis; at the moment, qcow2 silently rounds any unaligned
requests to this granularity. However, an upcoming patch will
fix a regression in the block layer ignoring too much of an
unaligned discard request, by changing the block layer to
break up a discard request at alignment boundaries; for that
to work, the block layer must know about our limits.
However, we can't go one step further by changing
qcow2_discard_clusters() to assert that requests are always
aligned, since that helper function is reached on paths
outside of the block layer.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ed Maste [Tue, 22 Nov 2016 01:32:45 +0000 (20:32 -0500)]
Fix FreeBSD (10.x) build after
7dc9ae43
Include sys/user.h for declaration of 'struct kinfo_proc'.
Add -lutil to qemu-ga link for kinfo_getproc.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id:
1479778365-11315-1-git-send-email-emaste@freebsd.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 22 Nov 2016 10:54:39 +0000 (10:54 +0000)]
Merge remote-tracking branch 'jtc/tags/block-pull-request' into staging
# gpg: Signature made Mon 21 Nov 2016 10:12:43 PM GMT
# gpg: using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* jtc/tags/block-pull-request:
gluster: Fix use after free in glfs_clear_preopened()
Message-id:
1479766499-29972-1-git-send-email-jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gerd Hoffmann [Tue, 22 Nov 2016 08:34:31 +0000 (09:34 +0100)]
seabios: update to 1.10.1 stable release
git shortlog rel-1.10.0..rel-1.10.1
===================================
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kevin Wolf [Thu, 17 Nov 2016 10:30:08 +0000 (11:30 +0100)]
gluster: Fix use after free in glfs_clear_preopened()
This fixes a use-after-free bug introduced in commit
6349c154. We need
to use QLIST_FOREACH_SAFE() when freeing elements in the loop. Spotted
by Coverity.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1479378608-11962-1-git-send-email-kwolf@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Stefan Hajnoczi [Mon, 21 Nov 2016 15:29:55 +0000 (15:29 +0000)]
Merge remote-tracking branch 'sstabellini/tags/xen-
20161108-tag' into staging
Xen 2016/11/08
# gpg: Signature made Tue 08 Nov 2016 07:48:12 PM GMT
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* sstabellini/tags/xen-
20161108-tag:
xen: Fix xenpv machine initialisation
Message-id: alpine.DEB.2.10.
1611081150170.3491@sstabellini-ThinkPad-X260
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 21 Nov 2016 11:09:58 +0000 (11:09 +0000)]
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Most notably this fixes a regression with vhost introduced by the pull before
last.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Nov 2016 03:51:55 PM GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
acpi: Use apic_id_limit when calculating legacy ACPI table size
ipmi: fix qemu crash while migrating with ipmi
ivshmem: Fix 64 bit memory bar configuration
virtio: set ISR on dataplane notifications
virtio: access ISR atomically
virtio: introduce grab/release_ioeventfd to fix vhost
virtio-crypto: fix virtio_queue_set_notification() race
Message-id:
1479484366-7977-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eduardo Habkost [Fri, 11 Nov 2016 16:45:42 +0000 (14:45 -0200)]
acpi: Use apic_id_limit when calculating legacy ACPI table size
The code that calculates the legacy ACPI table size for migration
compatibility uses max_cpus when calculating legacy_aml_len (the size of
the DSDT and SSDT tables). However, the SSDT grows according to APIC ID
limit, not max_cpus.
The bug is not triggered very often because of the 4k alignment on the
table size. But it can be triggered if you are unlucky enough to cross a
4k boundary.
Change the legacy_aml_len calculation to use apic_id_limit, to calculate
the right size.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ZhuangYanying [Fri, 18 Nov 2016 08:22:48 +0000 (16:22 +0800)]
ipmi: fix qemu crash while migrating with ipmi
Qemu crash in the source side while migrating, after starting ipmi service inside vm.
./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 \
-drive file=/work/suse/suse11_sp3_64_vt,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0 \
-vnc :99 -monitor vc -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-kcs,bmc=bmc0,ioport=0xca2
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffec4268700 (LWP 7657)]
__memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757
(gdb) bt
#0 __memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757
#1 0x00005555559ef775 in memcpy (__len=3, __src=0xc1421c, __dest=<optimized out>)
at /usr/include/bits/string3.h:51
#2 qemu_put_buffer (f=0x555557a97690, buf=0xc1421c <Address 0xc1421c out of bounds>, size=3)
at migration/qemu-file.c:346
#3 0x00005555559eef66 in vmstate_save_state (f=f@entry=0x555557a97690,
vmsd=0x555555f8a5a0 <vmstate_ISAIPMIKCSDevice>, opaque=0x555557231160,
vmdesc=vmdesc@entry=0x55555798cc40) at migration/vmstate.c:333
#4 0x00005555557cfe45 in vmstate_save (f=f@entry=0x555557a97690, se=se@entry=0x555557231de0,
vmdesc=vmdesc@entry=0x55555798cc40) at /mnt/sdb/zyy/qemu/migration/savevm.c:720
#5 0x00005555557d2be7 in qemu_savevm_state_complete_precopy (f=0x555557a97690,
iterable_only=iterable_only@entry=false) at /mnt/sdb/zyy/qemu/migration/savevm.c:1128
#6 0x00005555559ea102 in migration_completion (start_time=<synthetic pointer>,
old_vm_running=<synthetic pointer>, current_active_state=<optimized out>,
s=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1707
#7 migration_thread (opaque=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1855
#8 0x00007ffff3900dc5 in start_thread (arg=0x7ffec4268700) at pthread_create.c:308
#9 0x00007fffefc6c71d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Zhuang Yanying [Thu, 17 Nov 2016 12:31:03 +0000 (20:31 +0800)]
ivshmem: Fix 64 bit memory bar configuration
Device ivshmem property use64=0 is designed to make the device
expose a 32 bit shared memory BAR instead of 64 bit one. The
default is a 64 bit BAR, except pc-1.2 and older retain a 32 bit
BAR. A 32 bit BAR can support only up to 1 GiB of shared memory.
This worked as designed until commit 5400c02 accidentally flipped
its sense: since then, we misinterpret use64=0 as use64=1 and vice
versa. Worse, the default got flipped as well. Devices
ivshmem-plain and ivshmem-doorbell are not affected.
Fix by restoring the test of IVShmemState member not_legacy_32bit
that got messed up in commit 5400c02. Also update its
initialization for devices ivhsmem-plain and ivshmem-doorbell.
Without that, they'd regress to 32 bit BARs.
Cc: qemu-stable@nongnu.org
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Paolo Bonzini [Fri, 18 Nov 2016 15:07:02 +0000 (16:07 +0100)]
virtio: set ISR on dataplane notifications
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised. This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.
Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation. If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster. Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.
The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM. The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.
The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR. The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Fri, 18 Nov 2016 15:07:01 +0000 (16:07 +0100)]
virtio: access ISR atomically
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Fri, 18 Nov 2016 15:07:00 +0000 (16:07 +0100)]
virtio: introduce grab/release_ioeventfd to fix vhost
Following the recent refactoring of virtio notifiers [1], more specifically
the patch
ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to
start/stop ioeventfd") that uses virtio_bus_set_host_notifier [2]
by default, core virtio code requires 'ioeventfd_started' to be set
to true/false when the host notifiers are configured.
When vhost is stopped and started, however, there is a stop followed by
another start. Since ioeventfd_started was never set to true, the 'stop'
operation triggered by virtio_bus_set_host_notifier() will not result
in a call to virtio_pci_ioeventfd_assign(assign=false). This leaves
the memory regions with stale notifiers and results on the next start
triggering the following assertion:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
Aborted
This patch reintroduces (hopefully in a cleaner way) the concept
that was present with ioeventfd_disabled before the refactoring.
When ioeventfd_grabbed>0, ioeventfd_started tracks whether ioeventfd
should be enabled or not, but ioeventfd is actually not started at
all until vhost releases the host notifiers.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07748.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07760.html
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Fixes:
ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to start/stop ioeventfd")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi [Fri, 18 Nov 2016 15:24:26 +0000 (15:24 +0000)]
Merge remote-tracking branch 'public/tags/tracing-pull-request' into staging
# gpg: Signature made Fri 18 Nov 2016 03:01:22 PM GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* public/tags/tracing-pull-request:
trace: fix generated code build break
Message-id:
1479481289-2479-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 16 Nov 2016 20:17:32 +0000 (20:17 +0000)]
virtio-crypto: fix virtio_queue_set_notification() race
We must check for new virtqueue buffers after re-enabling notifications.
This prevents the race condition where the guest added buffers just
after we stopped popping the virtqueue but before we re-enabled
notifications.
I think the virtio-crypto code was based on virtio-net but this crucial
detail was missed. virtio-net does not have the race condition because
it processes the virtqueue one more time after re-enabling
notifications.
Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Stefan Hajnoczi [Fri, 18 Nov 2016 14:58:48 +0000 (14:58 +0000)]
Merge remote-tracking branch 'remotes/elmarco/tags/ivshmem-pull-request' into staging
* remotes/elmarco/tags/ivshmem-pull-request:
ivshmem: Fix 64 bit memory bar configuration
Message-id:
20161117152613.18578-1-marcandre.lureau@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 18 Nov 2016 14:49:02 +0000 (14:49 +0000)]
Merge remote-tracking branch 'rth/tags/pull-axp-
20161117' into staging
Update alpha palcode for smp
# gpg: Signature made Thu 17 Nov 2016 02:57:29 PM GMT
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* rth/tags/pull-axp-
20161117:
target-alpha: Log cpuid with -d int
target-alpha: Update palcode for smp
Message-id:
1479394965-11254-1-git-send-email-rth@twiddle.net
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Greg Kurz [Thu, 17 Nov 2016 13:59:13 +0000 (14:59 +0100)]
trace: fix generated code build break
If the QEMU source dir is
/var/tmp/aaa-qemu-clone
and the build dir is
/var/tmp/qemu-aio-poll-v2
Then I get an error as:
trace/generated-tracers.c:15950:13: error: invalid suffix "_trace_events"
on integer constant
TraceEvent *2_trace_events[] = {
^
trace/generated-tracers.c:15950:13: error: expected identifier or ‘(’ before
numeric constant
trace/generated-tracers.c: In function ‘trace_2_register_events’:
trace/generated-tracers.c:17949:32: error: invalid suffix "_trace_events" on
integer constant
trace_event_register_group(2_trace_events);
^
make: *** [trace/generated-tracers.o] Error 1
This patch fixes the issue.
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 18 Nov 2016 11:05:48 +0000 (11:05 +0000)]
Merge remote-tracking branch 'vivier/tags/trivial-patches-pull-request' into staging
# gpg: Signature made Thu 17 Nov 2016 10:18:58 AM GMT
# gpg: using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* vivier/tags/trivial-patches-pull-request:
qapi-schema: clarify 'colo' state for MigrationStatus
Message-id:
1479378016-19022-1-git-send-email-laurent@vivier.eu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Richard Henderson [Sun, 13 Nov 2016 18:41:13 +0000 (19:41 +0100)]
target-alpha: Log cpuid with -d int
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sun, 13 Nov 2016 18:22:18 +0000 (19:22 +0100)]
target-alpha: Update palcode for smp
Signed-off-by: Richard Henderson <rth@twiddle.net>
Zhuang Yanying [Thu, 17 Nov 2016 14:37:17 +0000 (18:37 +0400)]
ivshmem: Fix 64 bit memory bar configuration
Device ivshmem property use64=0 is designed to make the device
expose a 32 bit shared memory BAR instead of 64 bit one. The
default is a 64 bit BAR, except pc-1.2 and older retain a 32 bit
BAR. A 32 bit BAR can support only up to 1 GiB of shared memory.
This worked as designed until commit 5400c02 accidentally flipped
its sense: since then, we misinterpret use64=0 as use64=1 and vice
versa. Worse, the default got flipped as well. Devices
ivshmem-plain and ivshmem-doorbell are not affected.
Fix by restoring the test of IVShmemState member not_legacy_32bit
that got messed up in commit 5400c02. Also update its
initialization for devices ivhsmem-plain and ivshmem-doorbell.
Without that, they'd regress to 32 bit BARs.
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
1479385863-7648-1-git-send-email-ann.zhuangyanying@huawei.com>
zhanghailiang [Wed, 2 Nov 2016 07:44:12 +0000 (15:44 +0800)]
qapi-schema: clarify 'colo' state for MigrationStatus
VM can not get into colo state unless users enable 'x-colo'
capability for migration, Here it is necessary to clarify
this.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <
1478072652-9884-1-git-send-email-zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Igor Mammedov [Wed, 16 Nov 2016 13:04:41 +0000 (14:04 +0100)]
pc: fix FW_CFG_NB_CPUS to account for -device added CPUs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1479301481-197333-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 15 Nov 2016 12:17:15 +0000 (13:17 +0100)]
fw_cfg: move FW_CFG_NB_CPUS out of fw_cfg_init1()
PC will use this field in other way, so move it outside the common
code so PC could set a different value, i.e. all CPUs
regardless of where they are coming from (-smp X | -device cpu...).
It's quick and dirty hack as it could be implemented in more generic
way in MashineClass. But do it in simple way since only PC is affected
so far.
Later we can generalize it when another affected target gets support
for -device cpu.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1479212236-183810-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 15 Nov 2016 12:17:14 +0000 (13:17 +0100)]
Revert "pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs"
This reverts commit
080ac219cc7d9c55adf925c3545b7450055ad625.
Legacy FW_CFG_NB_CPUS will be reused instead of 'etc/boot-cpus'
fw_cfg file since it does the same and there is no point
to maintaing duplicate guest ABI, if it can be helped.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1479212236-183810-2-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 20:55:12 +0000 (20:55 +0000)]
Update version for v2.8.0-rc0 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 19:50:06 +0000 (19:50 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc, pci: documentation, fixes and cleanups
Lots of fixes all over the place.
Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (28 commits)
docs: add PCIe devices placement guidelines
virtio: drop virtio_queue_get_ring_{size,addr}()
vhost: drop legacy vring layout bits
vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout
nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
nvdimm acpi: use aml_name_decl to define named object
nvdimm acpi: rename nvdimm_dsm_reserved_root
nvdimm acpi: fix two comments
nvdimm acpi: define DSM return codes
nvdimm acpi: rename nvdimm_acpi_hotplug
nvdimm acpi: cleanup nvdimm_build_fit
nvdimm acpi: rename nvdimm_plugged_device_list
docs: improve the doc of Read FIT method
nvdimm acpi: clean up nvdimm_build_acpi
pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug
pc: memhp: move nvdimm hotplug out of memory hotplug
nvdimm acpi: drop the lock of fit buffer
qdev: hotplug: drop HotplugHandler.post_plug callback
vhost: migration blocker only if shared log is used
virtio-net: mark VIRTIO_NET_F_GSO as legacy
...
Message-id:
1479237527-11846-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 19:02:08 +0000 (19:02 +0000)]
Merge remote-tracking branch 'ehabkost/tags/machine-pull-request' into staging
qdev: Fix assert in PCI address property when used by vfio-pci
# gpg: Signature made Tue 15 Nov 2016 06:27:18 PM GMT
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/machine-pull-request:
qdev: Fix assert in PCI address property when used by vfio-pci
Message-id:
1479234540-3192-1-git-send-email-ehabkost@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel Oram [Thu, 10 Nov 2016 12:42:07 +0000 (12:42 +0000)]
qdev: Fix assert in PCI address property when used by vfio-pci
Allow the PCIHostDeviceAddress structure to work as the host property
in vfio-pci when it has it's default value of all fields set to ~0. In
this form the property indicates a non-existant device but given the
field bit sizes gets asserted as excess (and invalid) precision
overflows the string buffer. The BDF of an invalid device
"FFFF:FF:FF.F" is returned instead.
Signed-off-by: Daniel Oram <daniel.oram@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <
71f06765c4ba16dcd71cbf78e877619948f04ed9.
1478777270.git.daniel.oram@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 16:17:13 +0000 (16:17 +0000)]
Merge remote-tracking branch 'public/tags/block-pull-request' into staging
# gpg: Signature made Tue 15 Nov 2016 03:42:29 PM GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* public/tags/block-pull-request:
test-replication: fix leaks
Message-id:
1479224556-19367-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Marc-André Lureau [Wed, 9 Nov 2016 10:45:47 +0000 (14:45 +0400)]
test-replication: fix leaks
ASAN spotted:
SUMMARY: AddressSanitizer:
301990288 byte(s) leaked in 33 allocation(s).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20161109104547.23861-1-marcandre.lureau@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Marcel Apfelbaum [Tue, 1 Nov 2016 13:39:47 +0000 (15:39 +0200)]
docs: add PCIe devices placement guidelines
Proposes best practices on how to use PCI Express/PCI device
in PCI Express based machines and explain the reasoning behind them.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Greg Kurz [Fri, 4 Nov 2016 08:39:29 +0000 (09:39 +0100)]
virtio: drop virtio_queue_get_ring_{size,addr}()
These are not used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Greg Kurz [Fri, 4 Nov 2016 08:39:22 +0000 (09:39 +0100)]
vhost: drop legacy vring layout bits
The legacy vring layout is not used anymore as we use the separate
mappings even for legacy devices.
This patch simply removes it.
This also fixes a bug with virtio 1 devices when the vring descriptor table
is mapped at a higher address than the used vring because the following
function may return an insanely great value:
hwaddr virtio_queue_get_ring_size(VirtIODevice *vdev, int n)
{
return vdev->vq[n].vring.used - vdev->vq[n].vring.desc +
virtio_queue_get_used_size(vdev, n);
}
and the mapping fails.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Greg Kurz [Fri, 4 Nov 2016 08:39:15 +0000 (09:39 +0100)]
vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout
With virtio 1, the vring layout is split in 3 separate regions of
contiguous memory for the descriptor table, the available ring and the
used ring, as opposed with legacy virtio which uses a single region.
In case of memory re-mapping, the code ensures it doesn't affect the
vring mapping. This is done in vhost_verify_ring_mappings() which assumes
the device is legacy.
This patch changes vhost_verify_ring_mappings() to check the mappings of
each part of the vring separately.
This works for legacy mappings as well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:49 +0000 (19:13 +0800)]
nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
and use it to replace the raw number
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:48 +0000 (19:13 +0800)]
nvdimm acpi: use aml_name_decl to define named object
to make the code more clearer
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:47 +0000 (19:13 +0800)]
nvdimm acpi: rename nvdimm_dsm_reserved_root
Rename it to nvdimm_dsm_handle_reserved_root_method
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:46 +0000 (19:13 +0800)]
nvdimm acpi: fix two comments
fixed the English issue and code-style issue
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:45 +0000 (19:13 +0800)]
nvdimm acpi: define DSM return codes
and use these codes to refine the code
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:44 +0000 (19:13 +0800)]
nvdimm acpi: rename nvdimm_acpi_hotplug
Rename it to nvdimm_plug()
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:43 +0000 (19:13 +0800)]
nvdimm acpi: cleanup nvdimm_build_fit
inline buf_size to refine the code a bit
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:42 +0000 (19:13 +0800)]
nvdimm acpi: rename nvdimm_plugged_device_list
Its behavior has been changed as the nvdimm device which is being
realized also will be handled in this function, so rename it to
reflect the fact
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:41 +0000 (19:13 +0800)]
docs: improve the doc of Read FIT method
Improve the description and clearly document the length field
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:40 +0000 (19:13 +0800)]
nvdimm acpi: clean up nvdimm_build_acpi
To make the code more clearer, we
1) check ram_slots first, and build ssdt & nfit only when it is available
2) use nvdimm_get_plugged_device_list() to check if there is nvdimm device
plugged
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:39 +0000 (19:13 +0800)]
pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug
as it is never called when nvdimm hotplug happens
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:38 +0000 (19:13 +0800)]
pc: memhp: move nvdimm hotplug out of memory hotplug
as they use completely different way to handle hotplug event
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:37 +0000 (19:13 +0800)]
nvdimm acpi: drop the lock of fit buffer
as there is a global lock to protect vm-exit handlers and
QMP/monitor, this lock can be dropped
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Xiao Guangrong [Mon, 7 Nov 2016 11:13:36 +0000 (19:13 +0800)]
qdev: hotplug: drop HotplugHandler.post_plug callback
as nvdimm acpi is okay to build fit when the nvdimm device
has not been 'realized'
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Rafael David Tinoco [Mon, 24 Oct 2016 15:35:03 +0000 (15:35 +0000)]
vhost: migration blocker only if shared log is used
Commit
31190ed7 added a migration blocker in vhost_dev_init() to
check if memfd would succeed. It is better if this blocker first
checks if vhost backend requires shared log. This will avoid a
situation where a blocker is added inappropriately (e.g. shared
log allocation fails when vhost backend doesn't support it).
Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Fri, 4 Nov 2016 10:27:52 +0000 (12:27 +0200)]
virtio-net: mark VIRTIO_NET_F_GSO as legacy
virtio 1.0 spec says this is a legacy feature bit,
hide it from guests in modern mode.
Note: for cross-version migration compatibility,
we keep the bit set in host_features.
The result will be that a guest migrating cross-version
will see host features change under it.
As guests only seem to read it once, this should
not be an issue. Meanwhile, will work to fix guests to
ignore this bit in virtio1 mode, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Michael S. Tsirkin [Fri, 4 Nov 2016 10:04:23 +0000 (12:04 +0200)]
virtio: allow per-device-class legacy features
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Peter Xu [Mon, 31 Oct 2016 07:34:39 +0000 (15:34 +0800)]
acpi: fix DMAR device scope for IOAPIC
We should not use cpu_to_le16() here, instead each of device/function
value is stored in a 8 byte field.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Mon, 31 Oct 2016 07:34:40 +0000 (15:34 +0800)]
intel_iommu: fix incorrect assert
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Mon, 31 Oct 2016 07:34:38 +0000 (15:34 +0800)]
intel_iommu: fix several incorrect endianess and bit fields
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Mon, 31 Oct 2016 14:08:00 +0000 (22:08 +0800)]
virtio-crypto: tag as not hotpluggable and migration
Currently the virtio-crypto device hasn't supported
hotpluggable and live migration well. Let's tag it
as not hotpluggable and migration actively and reopen
them once we support them well.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ladi Prosek [Thu, 3 Nov 2016 08:55:50 +0000 (09:55 +0100)]
virtio: make virtqueue_alloc_element static
The function does not fully initialize the returned VirtQueueElement and should
be used only internally from the virtio module.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ladi Prosek [Thu, 3 Nov 2016 08:55:49 +0000 (09:55 +0100)]
virtio: rename virtqueue_discard to virtqueue_unpop
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Thu, 3 Nov 2016 01:22:23 +0000 (09:22 +0800)]
intel_iommu: fixing source id during IOTLB hash key calculation
Using uint8_t for source id will lose bus num and get the
wrong/invalid IOTLB entry. Fixing by using uint16_t instead and
enlarge level shift.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 12:07:53 +0000 (12:07 +0000)]
Merge remote-tracking branch 'jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 15 Nov 2016 07:37:27 AM GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* jasowang/tags/net-pull-request:
docs: fix COLO architecture diagram
net: fix sending of data with -net socket, listen backend
net: skip virtio-net config of deleted nic's peers
Message-id:
1479195830-4725-1-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 12:00:13 +0000 (12:00 +0000)]
Merge remote-tracking branch 'jtc/tags/block-pull-request' into staging
# gpg: Signature made Tue 15 Nov 2016 04:10:29 AM GMT
# gpg: using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* jtc/tags/block-pull-request:
mirror: do not flush every time the disks are synced
block/curl: Do not wait for data beyond EOF
block/curl: Remember all sockets
block/curl: Fix return value from curl_read_cb
block/curl: Use BDRV_SECTOR_SIZE
block/curl: Drop TFTP "support"
qemu-iotests: avoid spurious failure on test 109
iotests: add transactional failure race test
blockjob: refactor backup_start as backup_job_create
blockjob: add block_job_start
blockjob: add .start field
blockjob: add .clean property
blockjob: fix dead pointer in txn list
Message-id:
1479183291-14086-1-git-send-email-jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 11:59:40 +0000 (11:59 +0000)]
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.8-
20161115' into staging
ppc patch queue 2016-11-15
Latest set of ppc and spapr related patches. Highlights are:
* More POWER9 instructions
* Fix some subtle outstanding bugs
* Add some extra tests
One patch affects bitops.h, so isn't strictly ppc related.
# gpg: Signature made Tue 15 Nov 2016 02:46:48 AM GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.8-
20161115:
boot-serial-test: Add a test for the powernv machine
tests: add XSCOM tests for the PowerNV machine
ppc/pnv: Fix fatal bug on 32-bit hosts
ppc/pnv: fix xscom address translation for POWER9
ppc/pnv: add a 'xscom_core_base' field to PnvChipClass
spapr-vty: Fix bad assert() statement
FU exceptions should carry a cause (IC)
spapr: Fix migration of PCI host bridges from qemu-2.7
target-ppc: Implement bcdctz. instruction
target-ppc: Implement bcdcfz. instruction
target-ppc: Implement bcdctn. instruction
target-ppc: Implement bcdcfn. instruction
ppc: Remove some stub POWER6 models
ppc/pnv: fix compile breakage on old gcc
powernv: CPU compatibility modes don't make sense for powernv
target-ppc: add vprtyb[w/d/q] instructions
target-ppc: add vrldnm and vrlwnm instructions
target-ppc: add vrldnmi and vrlwmi instructions
bitops: fix rol/ror when shift is zero
Message-id:
1479178144-28153-1-git-send-email-david@gibson.dropbear.id.au
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 11:50:04 +0000 (11:50 +0000)]
Merge remote-tracking branch 'sthibault/tags/samuel-thibault' into staging
slirp updates
# gpg: Signature made Mon 14 Nov 2016 08:19:16 PM GMT
# gpg: using RSA key 0xA003196827414880
# gpg: Good signature from "Samuel Thibault <samuel.thibault@u-bordeaux.fr>"
# gpg: aka "Samuel Thibault <sthibault@debian.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: 6B0F AC21 8566 46E9 4AA2 D200 A003 1968 2741 4880
* sthibault/tags/samuel-thibault:
slirp: Fix access to freed memory
Message-id:
20161114202030.17685-1-samuel.thibault@ens-lyon.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 15 Nov 2016 11:49:46 +0000 (11:49 +0000)]
Merge remote-tracking branch 'quintela/tags/migration/
20161114' into staging
migration/next for
20161114
# gpg: Signature made Mon 14 Nov 2016 07:55:42 PM GMT
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* quintela/tags/migration/
20161114:
migration: Fix return code of ram_save_iterate()
tests/test-vmstate.c: add array of pointer to struct
tests/test-vmstate.c: add save_buffer util func
migration: fix missing assignment for has_x_checkpoint_delay
Message-id:
1479153474-2401-1-git-send-email-quintela@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Zhang Chen [Tue, 1 Nov 2016 03:38:12 +0000 (11:38 +0800)]
docs: fix COLO architecture diagram
Fix COLO-Proxy part of COLO architecture diagram
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Daniel P. Berrange [Fri, 4 Nov 2016 15:46:33 +0000 (15:46 +0000)]
net: fix sending of data with -net socket, listen backend
The use of -net socket,listen was broken in the following
commit
commit
16a3df403b10c4ac347159e39005fd520b2648bb
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Fri May 13 15:35:19 2016 +0800
net/net: Add SocketReadState for reuse codes
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.
This refactored the state out of NetSocketState into a
separate SocketReadState. This refactoring requires
that a callback is provided to be triggered upon
completion of a packet receive from the guest.
The patch only registered this callback in the codepaths
hit by -net socket,connect, not -net socket,listen. So
as a result packets sent by the guest in the latter case
get dropped on the floor.
This bug is hidden because net_fill_rstate() silently
does nothing if the callback is not set.
This patch adds in the middle callback registration
and also adds an assert so that QEMU aborts if there
are any other codepaths hit which are missing the
callback.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Mon, 31 Oct 2016 22:01:17 +0000 (00:01 +0200)]
net: skip virtio-net config of deleted nic's peers
https://bugzilla.redhat.com/show_bug.cgi?id=1373816
qemu core dump happens during repetitive unpug-plug
with multiple queues and Windows RSS-capable guest.
If back-end delete requested during virtio-net device
initialization, driver still can try configure the device
for multiple queues. The virtio-net device is expected
to be removed as soon as the initialization is done.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Paolo Bonzini [Wed, 9 Nov 2016 16:20:08 +0000 (17:20 +0100)]
mirror: do not flush every time the disks are synced
This puts a huge strain on the disks when there are many concurrent
migrations. With this patch we only flush twice: just before issuing
the event, and just before pivoting to the destination. If management
will complete the job close to the BLOCK_JOB_READY event, the cost of
the second flush should be small anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20161109162008.27287-2-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Max Reitz [Tue, 25 Oct 2016 02:54:31 +0000 (04:54 +0200)]
block/curl: Do not wait for data beyond EOF
libcurl will only give us as much data as there is, not more. The block
layer will deny requests beyond the end of file for us; but since this
block driver is still using a sector-based interface, we can still get
in trouble if the file size is not a multiple of 512.
While we have already made sure not to attempt transfers beyond the end
of the file, we are currently still trying to receive data from there if
the original request exceeds the file size. This patch fixes this issue
and invokes qemu_iovec_memset() on the iovec's tail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20161025025431.24714-5-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>