Alyssa Rosenzweig [Mon, 6 Apr 2020 20:44:17 +0000 (16:44 -0400)]
panfrost: Call the Bifrost compiler on bi devices
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Alyssa Rosenzweig [Mon, 6 Apr 2020 23:44:58 +0000 (19:44 -0400)]
panfrost: Set mfbd.msaa.sample_locations on Bifrost
And mfbd.shared_memory only on Midgard.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Tomeu Vizoso [Wed, 8 Apr 2020 13:58:42 +0000 (15:58 +0200)]
panfrost: On Bifrost, set the right tiler descriptor
On both fragment and tiler jobs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Tomeu Vizoso [Tue, 7 Apr 2020 16:29:53 +0000 (18:29 +0200)]
panfrost: Don't emit write_value jobs on Bifrost
As on Bifrost GPUs there's a different mechanism for reusing the tiler
data structures.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Tomeu Vizoso [Tue, 7 Apr 2020 16:22:37 +0000 (18:22 +0200)]
panfrost: Pass IS_BIFROST to pandecode_jc
So we can decode the right structures on Bifrost hw.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Tomeu Vizoso [Wed, 8 Apr 2020 08:55:28 +0000 (10:55 +0200)]
panfrost: Remove most usage of midgard_payload_vertex_tiler
By passing the prefix and postfix structs around, we can use most of the
cmdstream functions as well for bifrost, as those structs haven't
changed between midgard and bifrost.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Alyssa Rosenzweig [Tue, 7 Apr 2020 00:31:32 +0000 (20:31 -0400)]
panfrost: Unify vertex/tiler structures
Some fields were shuffled but these are essentially the same across the
generations.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Alyssa Rosenzweig [Tue, 7 Apr 2020 00:14:23 +0000 (20:14 -0400)]
panfrost: Staticize a few cmdstream functions
They are only used within the same source file.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Alyssa Rosenzweig [Mon, 6 Apr 2020 21:50:38 +0000 (17:50 -0400)]
panfrost: Populate bifrost-specific structs within mali_shader_meta
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Alyssa Rosenzweig [Mon, 6 Apr 2020 20:44:04 +0000 (16:44 -0400)]
panfrost: Add IS_BIFROST quirk
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>
Christian Gmeiner [Sun, 5 Apr 2020 19:46:55 +0000 (21:46 +0200)]
etnaviv: remove the "active" member of queries
The state tracker only gets to begin/query/destroy when !active and end
when active, so we have no need to try to track this ourselves.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4456>
Christian Gmeiner [Sun, 5 Apr 2020 19:33:26 +0000 (21:33 +0200)]
etnaviv: change begin_query(..) to a void function
We always return true.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4456>
Christian Gmeiner [Sun, 5 Apr 2020 19:42:10 +0000 (21:42 +0200)]
etnaviv: drop redundant calls to etna_acc_query_suspend(..)
Introduced by accident during rebase.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4456>
Jose Maria Casanova Crespo [Wed, 8 Apr 2020 18:51:52 +0000 (20:51 +0200)]
v3d: Primitive Counts Feedback needs an extra 32-bit padding.
Store Primitive Counts operations write 7 counters in 32-bit words
but also a padding 32-bit with 0. So we need 8 32-bit words instead
of the current 7 allocated.
This was causing an corruption in the next buffer when Transform
Feedback was enabled that were exposed on tests like:
dEQP-GLES3.functional.transform_feedback.*.points.*
This patch fixes 196 tests that were failing when they were run isolated
but they were passing when run using cts-runner.
Fixes:
0f2d1dfe65bf ("v3d: use the GPU to record primitives written to transform feedback")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2674
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4501>
Daniel Schürmann [Wed, 8 Apr 2020 14:27:34 +0000 (15:27 +0100)]
aco: make some reg_file helpers private and fix their uses
Fixes various subdword RA issues
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>
Daniel Schürmann [Tue, 7 Apr 2020 11:20:52 +0000 (12:20 +0100)]
aco: rename aco_lower_bool_phis() -> aco_lower_phis()
We also lower subdword phis, now.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>
Daniel Schürmann [Tue, 7 Apr 2020 11:16:57 +0000 (12:16 +0100)]
aco: lower subdword phis with SGPR operands
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>
Daniel Schürmann [Tue, 7 Apr 2020 09:46:37 +0000 (10:46 +0100)]
aco: don't constant-propagate into subdword PSEUDO instructions
PSEUDO instructions are lowered using SDWA, and thus,
cannot take literals and before GFX9 cannot take constants
at all. As the in-register representation differs between
32bit and 16bit floats, we first need to ensure correct
behavior.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>
Daniel Schürmann [Tue, 7 Apr 2020 09:37:25 +0000 (10:37 +0100)]
aco: ensure correct bit representation of subdword constants
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>
Daniel Schürmann [Tue, 7 Apr 2020 09:24:36 +0000 (10:24 +0100)]
aco: setup subdword regclasses for ssa_undef & load_const
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>
Samuel Pitoiset [Fri, 3 Apr 2020 13:26:15 +0000 (15:26 +0200)]
aco: implement nir_op_b2f16/nir_op_i2f16/nir_op_u2f16
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 13:12:17 +0000 (15:12 +0200)]
aco: implement 16-bit comparisons
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Sat, 4 Apr 2020 08:07:03 +0000 (10:07 +0200)]
aco: implement 16-bit nir_op_fmax3/nir_op_fmin3/nir_op_fmed3
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 13:40:35 +0000 (15:40 +0200)]
aco: implement 16-bit nir_op_ldexp
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 13:40:18 +0000 (15:40 +0200)]
aco: implement 16-bit nir_op_f2i32/nir_op_f2u32
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 13:12:12 +0000 (15:12 +0200)]
aco: implement 16-bit nir_op_bcsel
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 12:55:01 +0000 (14:55 +0200)]
aco: implement 16-bit nir_op_fsign
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 12:18:37 +0000 (14:18 +0200)]
aco: implement 16-bit nir_op_fsat
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 11:44:40 +0000 (13:44 +0200)]
aco: implement 16-bit nir_op_fmul
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 11:40:28 +0000 (13:40 +0200)]
aco: implement 16-bit nir_op_fcos/nir_op_fsin
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 11:34:18 +0000 (13:34 +0200)]
aco: implement 16-bit nir_op_fsub/nir_op_fadd
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 10:24:41 +0000 (12:24 +0200)]
aco: implement 16-bit nir_op_fabs/nir_op_fneg
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 10:09:41 +0000 (12:09 +0200)]
aco: implement 16-bit nir_op_fmax/nir_op_fmin
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 09:47:54 +0000 (11:47 +0200)]
aco: implement 16-bit nir_op_ffloor/nir_op_fceil
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 09:37:56 +0000 (11:37 +0200)]
aco: implement 16-bit nir_op_fsqrt/nir_op_frcp/nir_op_frsq
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 09:19:52 +0000 (11:19 +0200)]
aco: implement 16-bit nir_op_ftrunc/nir_op_fround_even
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 09:12:21 +0000 (11:12 +0200)]
aco: implement 16-bit nir_op_fexp2/nir_op_flog2
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 09:07:24 +0000 (11:07 +0200)]
aco: implement 16-bit nir_op_ffract
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Samuel Pitoiset [Fri, 3 Apr 2020 08:41:17 +0000 (10:41 +0200)]
aco: implement 16-bit nir_op_frexp_sig/nir_op_frexp_exp
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>
Caio Marcelo de Oliveira Filho [Fri, 27 Mar 2020 15:29:09 +0000 (08:29 -0700)]
intel/compiler: Remove cs_prog_data->threads
At this point all drivers are doing this math on their own -- since
most of them need to cover the variable group size case, in which at
compile time the group size (and number of threads) is not defined.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Caio Marcelo de Oliveira Filho [Thu, 9 Apr 2020 23:54:25 +0000 (16:54 -0700)]
iris: Stop using cs_prog_data->threads
This is a preparation for dropping this field since this value is
expected to be calculated by the drivers now for variable group size
case. And also the field would get in the way of brw_compile_cs
producing multiple SIMD variants (like FS).
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Caio Marcelo de Oliveira Filho [Fri, 27 Mar 2020 15:18:00 +0000 (08:18 -0700)]
anv: Stop using cs_prog_data->threads
Move the calculation to helper functions -- similar to what GL already
needs to do.
This is a preparation for dropping this field since this value is
expected to be calculated by the drivers now for variable group size
case. And also the field would get in the way of brw_compile_cs
producing multiple SIMD variants (like FS).
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Plamena Manolova [Mon, 12 Nov 2018 14:29:51 +0000 (16:29 +0200)]
i965: Implement ARB_compute_variable_group_size
This patch adds the implementation of ARB_compute_variable_group_size
for i965. We do this by storing the local group size in a push constant.
Additional changes made by Caio Marcelo de Oliveira Filho.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Plamena Manolova [Mon, 12 Nov 2018 14:29:51 +0000 (06:29 -0800)]
intel/compiler: Add support for variable workgroup size
Add new builtin parameters that are used to keep track of the group
size. This will be used to implement ARB_compute_variable_group_size.
The compiler will use the maximum group size supported to pick a
suitable SIMD variant. A later improvement will be to keep all SIMD
variants (like FS) so the driver can select the best one at dispatch
time.
When variable workgroup size is used, the small workgroup optimization
is disabled as it we can't prove at compile time that the barriers
won't be needed.
Extracted from original i965 patch with additional changes by
Caio Marcelo de Oliveira Filho.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Caio Marcelo de Oliveira Filho [Sat, 21 Mar 2020 04:02:06 +0000 (21:02 -0700)]
intel/compiler: Replace cs_prog_data->push.total with a helper
The push.total field had three values but only one was directly
used (size). Replace it with a helper function that explicitly takes
the cs_prog_data and the number of threads -- and use that in the
drivers.
This is a preparation for ARB_compute_variable_group_size where the
number of threads (hence the total size for push constants) is not
defined at compile time (not cs_prog_data->threads).
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Vinson Lee [Tue, 17 Mar 2020 05:49:39 +0000 (22:49 -0700)]
swr/rasterizer: Use private functions for min/max to avoid namespace issues.
This is a similiar fix as
bb2287ccdf46 ("gallivm/tessellator: use
private functions for min/max to avoid namespace issues").
Fixes:
ab5570820071 ("swr/rasterizer: Add tessellator implementation to the rasterizer")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Tested-by: Jan Zielinski <jan.zielinski@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4208>
Connor Abbott [Tue, 24 Mar 2020 17:01:15 +0000 (18:01 +0100)]
tu: Implement descriptor set update templates
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Tue, 24 Mar 2020 17:00:21 +0000 (18:00 +0100)]
tu: Add missing code for immutable samplers
Actually fill out the samplers, based on the radv implementation.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Mon, 23 Mar 2020 16:23:32 +0000 (17:23 +0100)]
tu: Emit CP_LOAD_STATE6 for descriptors
This restores the pre-loading of descriptor state, using the new
SS6_BINDLESS method that allows us to pre-load bindless resources.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Mon, 16 Mar 2020 10:49:19 +0000 (11:49 +0100)]
tu: Switch to the bindless descriptor model
Under the bindless model, there are 5 "base" registers programmed with a
64-bit address, and sam/ldib/ldc and so on each specify a base register
and an offset, in units of 16 dwords. The base registers correspond to
descriptor sets in Vulkan. We allocate a buffer at descriptor set
creation time, hopefully outside the main rendering loop, and then
switching descriptor sets is just a matter of programming the base
registers differently. Note, however, that some kinds of descriptors
need to be patched at command recording time, in particular dynamic
UBO's and SSBO's, which need to be patched at CmdBindDescriptorSets
time, and input attachments which need to be patched at draw time based
on the the pipeline that's bound. We reserve the fifth base register
(which seems to be unused by the blob driver) for these, creating a
descriptor set on-the-fly and combining all the dynamic descriptors from
all the different descriptor sets. This way, we never have to copy the
rest of the descriptor set at draw time like the blob seems to do. I
mostly chose to do this because the infrastructure was already there in
the form of dynamic_descriptors, and other drivers (at least radv) don't
cheat either when implementing this.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Mon, 23 Mar 2020 17:54:57 +0000 (18:54 +0100)]
ir3: Rewrite UBO push analysis to support bindless
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Thu, 19 Mar 2020 13:15:26 +0000 (14:15 +0100)]
ir3: Plumb through bindless support
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Fri, 20 Mar 2020 14:25:59 +0000 (15:25 +0100)]
ir3: LDC also has a destination
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Fri, 20 Mar 2020 14:25:11 +0000 (15:25 +0100)]
ir3: Also don't propagate immediate offset with LDC
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Wed, 18 Mar 2020 17:06:41 +0000 (18:06 +0100)]
ir3: Plumb through support for a1.x
This will need to be used in some cases for the upcoming bindless
support, plus ldc.k instructions which push data from a UBO to const
registers.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Fri, 6 Mar 2020 17:06:06 +0000 (18:06 +0100)]
ir3: Add bindless instruction encoding
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Fri, 6 Mar 2020 10:29:54 +0000 (11:29 +0100)]
freedreno/a6xx: Add registers for the bindless model
In Vulkan, descriptors for samplers, SSBO's, etc. are collected into
descriptor sets, and shaders can use multiple descriptor sets. At
command-recording time, users can swap out only some of the descriptor
sets, and the driver is supposed to do the minimum amount necessary to
update any internal binding tables, knowing that only some of the
descriptors have changed.
With the old binding model, focused on GL, where there are separate
tables for each type of resource, we can do somewhat better than now by
preserving descriptors from lower descriptor sets when switching higher
descriptor sets. However we still have to copy around descriptors before
each draw.
At least for a6xx, qualcomm went further, essentially copying the Vulkan
binding model as an alternate way to load resources. There's an array of
registers (actually an array for compute and one for everything else),
where each register holds a pointer to a descriptor set that can contain
various different descriptor types. The descriptors are padded out to 16
dwords, so that every instruction can use an index instead of a dword
offset. It's called "bindless", I think, because it can also be used to
implement the old GL bindless extensions (presumably it allows more
samplers and textures than the old model).
This commit adds the register and cmdstream parts. Next up will be the
instruction encoding.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Fri, 6 Mar 2020 10:27:46 +0000 (11:27 +0100)]
freedreno/a6xx: Add UBO size field
Verified with the vulkan blob, which uses ldc and UBO descriptors, and
turnip will too soon.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Wed, 18 Mar 2020 12:12:31 +0000 (13:12 +0100)]
tu: ir3: Emit push constants directly
Carve out some space at the beginning for push constants, and push them
directly, rather than remapping them to a UBO and then relying on the
UBO pushing code. Remapping to a UBO is easy now, where there's a single
table of UBO's, but with the bindless model it'll be a lot harder. I
haven't removed all the code to move the remaining UBO's over by 1,
though, because it's going to all get rewritten with bindless anyways.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Connor Abbott [Thu, 26 Mar 2020 14:35:11 +0000 (15:35 +0100)]
tu: Dump out shader assembly when requested
We don't use the ir3 variant machinery, so we have to do this ourselves.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
Daniel Schürmann [Tue, 7 Apr 2020 16:15:35 +0000 (17:15 +0100)]
aco: RA - move all std::function objects into proper functions
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Tue, 7 Apr 2020 15:46:58 +0000 (16:46 +0100)]
aco: move all needed helper containers to ra_ctx
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Wed, 11 Mar 2020 10:02:20 +0000 (11:02 +0100)]
aco: change live_out variables to std::unordered_set
Improves performance of live_var_analysis for larger shaders
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Wed, 11 Mar 2020 09:47:07 +0000 (10:47 +0100)]
aco: change some std::map to std::unordered_map in register_allocation
This improves compile times slightly for larger shaders
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Wed, 11 Mar 2020 07:38:48 +0000 (08:38 +0100)]
aco: refactor try_remove_trivial_phi() in RA
Minor refactoring to avoid some pointer chasing.
This patch also changes the live_out argument to be
passed by reference to avoid an unnecessary copy.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Tue, 10 Mar 2020 12:39:42 +0000 (13:39 +0100)]
aco: improve speed of live_var_analysis
by merging live_sgprs and live_vgprs sets.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Tue, 10 Mar 2020 11:41:02 +0000 (12:41 +0100)]
aco: during RA only insert into renames table if a variable got renamed
This improves the speed of register allocation.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Tue, 10 Mar 2020 10:47:30 +0000 (11:47 +0100)]
aco: replace assignment hashmap by std::vector in register allocation
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Tue, 10 Mar 2020 10:50:41 +0000 (11:50 +0100)]
aco: improve register assignment when live-range splits are necessary
When finding a good place for a register, we can ignore
killed operands.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Tue, 10 Mar 2020 09:00:32 +0000 (10:00 +0100)]
aco: improve hashing for value numbering
An improved hashing greatly reduces the number of collisions,
and thus, increases the speed for lookups in the hash table.
The hash function now uses Murmur3 written by Austin Appleby.
This patch also pre-reserves space for the hashmap to avoid rehashing.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Mon, 30 Mar 2020 16:25:00 +0000 (17:25 +0100)]
aco: add explicit padding for all Instruction sub-structs
This patch also adds static_asserts on the size of Instructions
to ensure no internal padding is present.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Daniel Schürmann [Wed, 11 Mar 2020 12:12:08 +0000 (13:12 +0100)]
aco: guarantee that Temp fits in 4 bytes
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>
Jonathan Marek [Fri, 13 Mar 2020 15:57:23 +0000 (11:57 -0400)]
turnip: new clear/blit implementation with shader path fallback
The shader path is used to implement the following cases:
* stencil aspect mask on D24S8 (for image_to_buffer,buffer_to_image)
* clear/copy msaa destination (2D engine can't have msaa dest)
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Wed, 8 Apr 2020 14:56:30 +0000 (10:56 -0400)]
turnip: add vk_format_is_snorm/is_float
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Wed, 8 Apr 2020 14:56:16 +0000 (10:56 -0400)]
turnip: rework format helpers
* Take tile_mode as input directly
* tu6_format_gmem to tu6_base_format, use may not be limited to GMEM
* Add new helpers that will return the correct tile_mode as for image level
as part of the format.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Wed, 8 Apr 2020 03:25:12 +0000 (23:25 -0400)]
turnip: use dirty bits for dynamic viewport/scissor state
CmdClearAttachments shader path will overwrite this state, so it needs to
be re-emitted with dirty bits in that case.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Wed, 8 Apr 2020 02:23:27 +0000 (22:23 -0400)]
turnip: save attachment samples in renderpass state
This is needed to be able to know the number of samples during
CmdClearAttachments which can be used while the framebuffer is unknown.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Wed, 8 Apr 2020 02:20:10 +0000 (22:20 -0400)]
turnip: disable 8x msaa
Not everything supports 8x msaa, and the blob doesn't support it at all.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Wed, 8 Apr 2020 01:39:40 +0000 (21:39 -0400)]
turnip: fix nir validate failure from push constant lowering
Fixes newly added checks in nir validate failing.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Tue, 18 Feb 2020 13:54:15 +0000 (08:54 -0500)]
turnip: split up gmem/tile alignment
Note: the x1/y1 align in tu6_emit_blit_scissor was broken
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Fri, 13 Mar 2020 15:47:15 +0000 (11:47 -0400)]
turnip: RB_CCU_CNTL fixes
* Correct bypass value for a618
* Bypass value for blitter
* Don't set RB_CCU_CNTL again unnecessarily in tu6_emit_binning_pass
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Fri, 13 Mar 2020 14:20:23 +0000 (10:20 -0400)]
freedreno/a6xx: set bypass RB_CCU_CNTL value for blitter
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Jonathan Marek [Fri, 13 Mar 2020 14:09:11 +0000 (10:09 -0400)]
freedreno/registers: add RB_CCU_CNTL bitfields
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Samuel Pitoiset [Thu, 9 Apr 2020 09:37:27 +0000 (11:37 +0200)]
radv: allow TC-compat HTILE with GENERAL outside of render loops
This gives +8% with Wolfeinstein Youngblood on my Vega64, and
according to someone else, it also improves performance with Doom
2016 and Wolfenstein 2 (and probably other ID Tech games).
This improvement is because Youngblood uses GENERAL for the main
depth-only pass and TC-compat HTILE is now enabled with GENERAL if
we know that we are outside of a render loop. This obviously also
reduces the number of HTILE decompressions from/to GENERAL.
Note that Youngblood violates the Vulkan spec regarding render loops
because they are only allowed with input attachments. Expect possible
rendering issues if apps use render loops with the wrong way (ie.
without input attachmens) because HTILE might not be coherent if
a depth-stencil texture is sampled and rendered in the same draw.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2704
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4391>
Samuel Pitoiset [Tue, 31 Mar 2020 08:35:00 +0000 (10:35 +0200)]
radv: only enable TC-compat HTILE for images readable by a shader
If no texture fetches happen it's useless to enable TC-compat HTILE.
Because the driver currently doesn't support TC-compat HTILE for
storage images we don't have to check.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4497>
Samuel Pitoiset [Sun, 5 Apr 2020 07:42:50 +0000 (09:42 +0200)]
radv: only expose fp16 control features for chips with double rate fp16
This disables all fp16 shader control features on GFX8 because only
GFX9+ supports double rate packed math.
This improves consistency regarding other AMD Vulkan drivers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>
Samuel Pitoiset [Sun, 5 Apr 2020 07:33:43 +0000 (09:33 +0200)]
radv: only expose storageInputOutput16 for chips with double rate fp16
This feature allows to use both 16-bit integers and 16-bit floats
as inputs/outputs.
This disables storageInputOutput16 on GFX8 because only GFX9+ supports
double rate packed math.
This improves consistency regarding other AMD Vulkan drivers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>
Samuel Pitoiset [Sun, 5 Apr 2020 07:25:18 +0000 (09:25 +0200)]
radv: only expose shaderFloat16 for chips with double rate fp16
This disables shaderFloat16 on GFX8 because only GFX9+ supports
double rate packed math.
This improves consistency regarding other AMD Vulkan drivers and
it makes no sense to enable that feature without packed math.
This also reduces performance with Wolfeinstein Youngblood if
fp16 is forced enabled on GFX8, while it's similar on GFX9.
We might re-introduce that feature in the future with ACO support
if it ends up being faster and correct.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>
Samuel Pitoiset [Sun, 5 Apr 2020 07:23:16 +0000 (09:23 +0200)]
ac,radv: add ac_gpu_info::has_double_rate_fp16
Only GFX9+ support double rate packed math instructions.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>
Jonathan Marek [Wed, 8 Apr 2020 23:43:24 +0000 (19:43 -0400)]
turnip: use buffer size instead of bo size for VFD_FETCH_SIZE
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4224>
Jonathan Marek [Wed, 18 Mar 2020 02:28:38 +0000 (22:28 -0400)]
turnip: improve vertex input handling
Emit vertexBindingDescriptionCount bindings, instead of one per attribute.
Verified with dEQP-VK.pipeline.vertex_input.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4224>
James Zhu [Mon, 6 Apr 2020 20:34:01 +0000 (20:34 +0000)]
radeonsi: fix Segmentation fault during vaapi enc test
Fix Segmentation fault during vaapi enc test on Arcturus.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by Leo Liu <leo.liu@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4472>
Bas Nieuwenhuizen [Wed, 8 Apr 2020 11:53:47 +0000 (13:53 +0200)]
radv: Use correct buffer count with variable descriptor set sizes.
Fixes dEQP-VK.binding_model.descriptorset_random.sets16.noarray.ubolimitlow.sbolimitlow.imglimitlow.iublimitlow.frag.ialimitlow.0
CC: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2607
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4489>
Bas Nieuwenhuizen [Wed, 8 Apr 2020 10:51:34 +0000 (12:51 +0200)]
radv: Whitespace fixup.
Review comment that I did, but forgot to git add before amending ...
From https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4334
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4488>
Samuel Iglesias Gonsálvez [Wed, 8 Apr 2020 08:57:28 +0000 (10:57 +0200)]
radv: set sparseAddressSpaceSize to RADV_MAX_MEMORY_ALLOCATION_SIZE
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4487>
Samuel Iglesias Gonsálvez [Wed, 8 Apr 2020 08:55:37 +0000 (10:55 +0200)]
radv: check buffer size in vkCreateBuffer()
Fixes:
dEQP-VK.api.buffer.basic.size_max_uint64
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4487>
Bas Nieuwenhuizen [Tue, 7 Apr 2020 20:23:09 +0000 (22:23 +0200)]
radv: Consider maximum sample distances for entire grid.
The other pixels in the grid might have samples with a larger
distance than the (0,0) pixel.
Fixes dEQP-VK.pipeline.multisample.sample_locations_ext.verify_location.samples_8_packed
when CTS is compiled with clang.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4480>
Samuel Pitoiset [Fri, 13 Mar 2020 10:23:07 +0000 (11:23 +0100)]
radv: enable lowering of GS intrinsics for the LLVM backend
This replaces emit_vertex with:
if (vertex_count < max_vertices) {
emit_vertex_with_counter vertex_count ...
vertex_count += 1
}
Which is exactly what NIR->LLVM was doing but at NIR level. This
pass is already called by ACO.
pipeline-db changes on GFX10:
Totals from affected shaders:
SGPRS: 1952 -> 1912 (-2.05 %)
VGPRS: 2112 -> 2044 (-3.22 %)
Code Size: 189368 -> 185620 (-1.98 %) bytes
Max Waves: 494 -> 491 (-0.61 %)
No pipeline-db changes on other generations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4182>
Samuel Pitoiset [Tue, 31 Mar 2020 13:26:00 +0000 (15:26 +0200)]
radv: remove radv_layout_has_htile() helper
The goal of this function was to return whether a depth-stencil image
has HTILE, in comparison to radv_layout_is_htile_compressed() which
is used to know whether a depth-stencil image has HTILE compressed.
These two functions are actually similar and they have never been
used for what they were supposed to. Remove radv_layout_has_htile()
in favour of radv_layout_is_htile_compressed() for now. If it's
needed in the future, I will re-introduce this concept properly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4389>
Samuel Pitoiset [Tue, 31 Mar 2020 13:22:01 +0000 (15:22 +0200)]
radv: cleanup creating the decompress/resummarize pipelines
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4389>