Przemyslaw Marczak [Tue, 9 Dec 2014 18:08:57 +0000 (19:08 +0100)]
fat: read: fix read issue
The present fat implementation ignores FAT16 long name directory entries
stored as the each block last entry. This causes that some files can't
be accessed by read in case if it's dir entries are stored in two blocks.
Now this is fixed by store the last used block in the buffer,
before read the next one.
Note that this is a temporary fix, since this breaks FAT32 read,
and will be fixed ASAP.
Change-Id: Ie2c2ccd07091d5fd09011c52d6f7c7dbdabd1dab
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Chanho Park [Mon, 17 Nov 2014 12:20:59 +0000 (21:20 +0900)]
packaging: support parallel compiliation
Change-Id: I869e7aac7d476539235342276ca30a4ac242db94
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Chanho Park [Mon, 17 Nov 2014 12:15:41 +0000 (21:15 +0900)]
packaging: change params.bin size
This patch changes params.bin size to 16k according to changed default
params size.
Change-Id: I47e670fe01b3fcffb7c90f5d100721df8282ae9f
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Przemyslaw Marczak [Wed, 5 Nov 2014 20:18:39 +0000 (21:18 +0100)]
tizen: config: enable platform command and platform setup
This patch enables "platform" command and adds multiple
platform setups to tizen environment.
At this stage - there are available three setups:
- trats2 pit v8
- trats2 pit v13 - chosen
- odroidu3 Tizen v2.x - chosen
- odroidu3 Tizen v3.0 - chosen
The chosen setup - is the default for each platform,
and is set as an active after first boot.
This should be changed manually if another setup is required.
Change-Id: I86ec63f4422e210f20d8d2240ca3bade581b5466
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Inha Song [Wed, 5 Nov 2014 07:38:27 +0000 (16:38 +0900)]
tizen: add new gpt version and add gpt version headers
This patch adds new gpt version and moves gpt data into
separated headers.
In order to be able to gpt version switch, make gpt_vxx.h
files that has the partition information.
- include/samsung/gpt_v08.h
- include/samsung/gpt_v13.h
Change-Id: I33870a54703a07468f17b0f0d7cf43e563409e65
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Tue, 4 Nov 2014 06:47:31 +0000 (15:47 +0900)]
tizen: change environment offset and size
This patch changes environment offset and size
in order to unify the environment location.
Change-Id: I9d3195b733c1bbfcb5d0e8c0ef504844b17181f9
Signed-off-by: Inha Song <ideal.song@samsung.com>
Przemyslaw Marczak [Wed, 5 Nov 2014 20:17:19 +0000 (21:17 +0100)]
exynos: config: set console and print I/O buffer to 1024 Bytes
Before this change, the len of environment variable was not
enought for many partitions settings for the Exynos4 devices
in the ${partitions}. Now the limit is full enought.
Change-Id: Ib12b7b3344bce548cacb634d5210e0309a993537
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 13 Nov 2014 10:40:02 +0000 (11:40 +0100)]
samsung: misc_init_r: add call platform_setup() before dfu setup
This change adds call of platform_setup() to check or set active
platform configuration.
Change-Id: I355736bf40f8fa3697ce0b4546f7702d2e54a0f9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 5 Nov 2014 20:09:07 +0000 (21:09 +0100)]
samsung: misc: add new feature for configure partitions layout at boot.
This feature requires some platform configuration data
in the environment, which is:
-${platname}_setup_N_name - name of this setup
-${platname}_setup_N_partitions - GPT partitions or NULL if MBR
-${platname}_setup_N_alt_system - dfu_alt_info with system entities
-${platname}_setup_N_bootpart - boot partition number for this setup
-${platname}_setup_N_rootpart - root partition number for this setup
And for at least one setup it requires:
-${platname}_setup_cnt - number of ${platname} configs
-${platname}_setup_chosen - chosen plaform config
-${platname}_setup_active - active platform config (autoset)
Two environment variables are used to switch/check active setup:
-${platname}_setup_chosen - can be changed manually
-${platname}_setup_active - should be the same as chosen
If chosen setup is not set, then will be automatically set on boot
by setting proper env:
- $partitions := ${platname}_setup_N_partitions
- $dfu_alt_system_${platname} := ${platname}_setup_N_alt_system
- $mmcbootpart := ${platname}_setup_N_bootpart
- $mmcrootpart := ${platname}_setup_N_rootpart
- ${platname}_setup_active := ${platname}_setup_chosen
If ${partitions} are:
- set, then gpt write is called
- unset, e.g. when using MBR - then partition table is unchanged
Config:
- CONFIG_PLATFORM_SETUP
Change-Id: I3d2aa0da84277a5f9255c1d35ee32b7ce2969e2c
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 12 Nov 2014 16:10:05 +0000 (17:10 +0100)]
samsung: tizen: get dfu settings by platname
The dfu_alt_info can be common for multiple
platform versions(Trats 1/2, Odroid U3/X2),
so this change adds ability to use common
settings for each platform instead of using
independend settings for each board.
This can safe some environment space on this
multiplatform config.
Change-Id: Ia3aff9043c5a8db0c5db812d2a74df4e8a691882
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 13 Nov 2014 10:38:50 +0000 (11:38 +0100)]
samsung: misc_init_r: set board info before setting dfu
Change-Id: Ia4f2f9f0a317cf53a6a7ba34d9646c0270ca3dd2
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 12 Nov 2014 14:03:04 +0000 (15:03 +0100)]
samsung: misc: set env ${platname} in set_board_info()
This change adds setting the environment ${platname},
as a platform name in the function set_board_info().
Change-Id: Iba16e917f9c88458e1af21892d84ded121aa12cf
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 13 Nov 2014 14:28:27 +0000 (15:28 +0100)]
odroid: change: get_board_type() to get_board_model()
Change-Id: I7bd58fc246f8f1efc5d657f4015f36e622eb2ca5
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 12 Nov 2014 13:49:35 +0000 (14:49 +0100)]
samsung: common: add get_plat_name()/get_board_model()
This patch introduce some cleanup in set_board_info(),
related to the listed code changes:
Change 1:
The name of function get_board_type() was unclear,
so now it is changed to get_board_model().
Change 2:
The previous version of get_board_name() was returning
the platform name - now it returns full boardname.
Change 3:
Add new function get_plat_name() - returns platform name.
This is useful for platform common usage like environment
settings.
Change-Id: If07de08bd4e97695fc906b4f4e6f239e49756eac
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 13 Nov 2014 14:29:03 +0000 (15:29 +0100)]
odroid: setup: disable duplicated definitions
Change-Id: I525f44753e5e108f11cbb05ad13a994a47df6728
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Inha Song [Thu, 6 Nov 2014 02:37:36 +0000 (11:37 +0900)]
tizen: Update odroid dfu settings for the version upgrade
This patch update odroid dfu settings for Tizen 3.0 on Odroid.
========================
Num Name Size Offset
========================
1. BOOT: 32MiB 12MiB
2. ROOT: 3GiB
3. DATA: 512MiB
4. Extd:
5. USER: -
6. MODULE: 20MiB
========================
Change-Id: I56cb904cbcb143423f885b05b1f3524e6aedd5d4
Signed-off-by: Inha Song <ideal.song@samsung.com>
Lukasz Majewski [Wed, 5 Nov 2014 09:56:13 +0000 (10:56 +0100)]
dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths
Recently the ext4 file system imposed passing absolute path with its file
name parameter.
As a result dfu_alt_info env variable has been modified to provide absolute
path when ext4 file system is accessed (e.g. /uImage ext4 0 2;).
Unfortunately, lthor flashing program provides plain file name (like uImage)
and hence those two file names do not match anymore.
Presented commit also allows lthor to write files to sub directories (like
/boot/bin/uImage).
Change-Id: I2348da05c28cfcd51c952f81cd404c7a369124f5
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
Changes for v2:
- Fix patch to path in comment
Lukasz Majewski [Thu, 30 Oct 2014 11:31:57 +0000 (12:31 +0100)]
tizen_defconfig: Update tizen_defconfig file to work with v2014.10
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 30 Oct 2014 08:37:17 +0000 (09:37 +0100)]
packaging: change version to 2014.10
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Przemyslaw Marczak [Wed, 1 Oct 2014 14:34:58 +0000 (16:34 +0200)]
tizen.h: env: checkboard: get partition numbers from variables
Change-Id: I9296eadd6faf97d88cc611276e47c252d6e00417
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Joonyoung Shim [Wed, 1 Oct 2014 12:27:35 +0000 (21:27 +0900)]
odroid: fix g2d sclk rate
G2D core should be provided 200MHz clock rate.
Change-Id: If06eb7d4433d302767f04e7c8b487cdcd32321a4
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Przemyslaw Marczak [Tue, 30 Sep 2014 15:53:10 +0000 (17:53 +0200)]
exynos4-dt: get dfu system settings from environment
Change-Id: I7f6197e9197595121f2b90d577e3cb723262e3c9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 30 Sep 2014 15:50:07 +0000 (17:50 +0200)]
tizen: add dfu system setting to default env
Change-Id: I80a5aa0389191b1caedff0d488dc61f0731d94d9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 23 Sep 2014 10:21:29 +0000 (12:21 +0200)]
exynos4-dt: clock: set aclk_cores to 200MHz
Change-Id: I2cb7a7f60b6153a44b3e34cb1d6a91ef38dc5afd
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 11 Jun 2014 10:04:11 +0000 (12:04 +0200)]
trats,trats2,odroid,tizen: add default dfu device environment
This change allows using DFU and THOR commands without
passing command line arguments.
Change-Id: I4fecafa6cf20fcd76fa6c3526a9f297f71f20fae
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 12 Jun 2014 08:20:59 +0000 (10:20 +0200)]
thor:cmd: get the default command arguments from environment
This change adds support to getting the default DFU cmd line
arguments from the environment.
DFU and THOR uses the same command line arguments,
so the DFU command environment setup can be used also with THOR.
Change-Id: I2e0984c909147c13191f6d6646d094c9f02c392a
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 7 Aug 2014 11:03:25 +0000 (13:03 +0200)]
dfu:cmd: get the default command arguments from environment
This change adds support to store the default DFU cmd line
arguments in the environment.
This is useful for users who usually use the same arguments
for dfu command and do the upgrade frequently.
DFU command use cases:
- dfu <usb ctrl> <if> <dev> [<list>] - use command line args
- dfu [<list>] - take the default command line args from env
And for both - optional list the initialized DFU entities.
To use the default dfu device configuration user should define:
- $dfu_usb_con - e.g. "0"
- $dfu_interface - e.g. "mmc"
- $dfu_device - e.g. "0"
Change-Id: I1c87677c0384a5f5a808ab9b7845d6da6f9ec980
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Joonyoung Shim [Wed, 6 Aug 2014 02:48:30 +0000 (11:48 +0900)]
dfu:mmc: support to get partition information by name
The partitions can have partition name like label. If partition name is
exist, first get partition information by name than by partition number,
so we can ignore hardcoding dependency of partition number.
Change-Id: Ibfb2521438ce366959814c2a87085e9f384de588
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Przemyslaw Marczak [Thu, 31 Jul 2014 14:31:55 +0000 (16:31 +0200)]
packaging: u-boot.spec: add tizen_defconfig support
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 31 Jul 2014 14:26:45 +0000 (16:26 +0200)]
tool:mkimage_signed: add tizen_defconfig support
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 31 Jul 2014 14:28:17 +0000 (16:28 +0200)]
tools:mkimage_multidtb: cat multi-plat bin with multiple dtbs
This script concatenates proper dtb files into
one multi.dtb with 4B padding after the u-boot-multi.bin.
Output: u-boot-mmc.bin:
| u-boot-multi.bin | dtb 1 (4B padding) | dtb 2 (4b padding) | dtb x ...
Change-Id: I9b308fc58707917b89c3f59e65b414d02f5e8efb
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 8 Jul 2014 11:48:16 +0000 (13:48 +0200)]
tizen: add tizen_defconfig
Change-Id: I52603d206b90616f1ea8dc4ff926c4f2541964da
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 8 Jul 2014 11:51:14 +0000 (13:51 +0200)]
tizen: add Exynos4 common file
Change-Id: Id637b89fa044a6b4bfc1eb05e887b4804a72d645
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 23 Sep 2014 08:55:15 +0000 (10:55 +0200)]
samsung:misc: set_board_info: set a proper $partitions at boot
This change adds setting the environment variable: "partitions"
which is required to restore the partition table on the Trats2.
At this moment we are using MSDOS partition table on the Odroid
board, so for this board the above variable contains only a message.
Now the u-boot LCD menu in Trats2 is fully functional and the option:
(PWR+VOLUP) -> GPT restore - works well
Change-Id: I571466b7392a6775e0afe408c66be1dcc17d9ab8
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 14:20:29 +0000 (16:20 +0200)]
samsung:board: dram_init(): alloc memory to store fdt dram info
For CONFIG_OF_MULTI the dram_init() function gets memory information
from the device tree blob by the call to fdtdec_decode_memory().
The same is done second time in dram_init_banksize() - this was the
simplest because board info structure is not initialized at dram_init()
stage.
This change uses malloc and gd->priv pointer to store the memory banks
parameters and next uses it in dram_init_banksize().
Thanks to this change, the boot time decreases, because, the function
fdtdec_decode_memory() is called only once.
Change-Id: I8f357c6a641d4440f32d2fe24d7e1e2dc5bc4a3d
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 11:17:57 +0000 (13:17 +0200)]
samsung:board: check board type before init exynos fb
For CONFIG_OF_MULTI some boards doesn't use frame buffer,
so the board type is now checked before the fb configuration.
Change-Id: Ide9ba4893b89ccc84ea84482324dd39ed8fbd48c
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 11:02:19 +0000 (13:02 +0200)]
samsung:board: don't call set_board_type() for CONFIG_OF_MULTI
For this config the set_board_type() is called much more earlier
- in the function setup_fdt(), so the second call in the board file
is unneeded.
Change-Id: I71037c593d00f7bde95a0880787e64d0d09ff173
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 14:15:13 +0000 (16:15 +0200)]
u-boot:global data: add new field 'void *priv' for CONFIG_OF_MULTI
This field is required for storing detected platform info
before the relocation or "bd_t" initialization.
Change-Id: Idbe987252079e5bf863adbec4fd5fc5edc2d8829
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 13:27:59 +0000 (15:27 +0200)]
thor: check board type before display for CONFIG_OF_MULTI.
For multi platform binary, it is required to check
the board type because not every board supports display.
Change-Id: Ia4153d58f48846a0bec6e9dc90ea17d87d5da096
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 29 Jul 2014 12:38:04 +0000 (14:38 +0200)]
exynos_fb.c: lcd_ctrl_init(): check board before init lcd
Change-Id: Ie8219913e8501fc2180d5d96f19844d3e08a6326
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 29 Jul 2014 12:35:53 +0000 (14:35 +0200)]
exynos4-dt.h: enable generic file system commands
Change-Id: Ibfd834403381d18f27825a19807517ad06097146
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 29 Jul 2014 12:34:58 +0000 (14:34 +0200)]
samsung:misc.h: add CONFIG_OF_MULTI functions declarations
Change-Id: Id2ffd28d380cfce69420418995fdb388c31e6b6c
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 29 Jul 2014 12:32:03 +0000 (14:32 +0200)]
samsung:board: run lcd menu only on trats2 for CONFIG_OF_MULTI
Change-Id: I02baeb60125f695e30c138b7311910731f5d9f40
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 18:18:54 +0000 (20:18 +0200)]
samsung:board: init dram info based on memory node in fdt
Change-Id: I3677f0ab0b4aed264de8af37e87b081f66a36b97
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 15:43:23 +0000 (17:43 +0200)]
samsung:board:board_init: use CONFIG_SYS_SDRAM_BASE
Change-Id: I0e974580f4fa725f9a9e824591be57cb573a02b8
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 30 Jul 2014 12:17:54 +0000 (14:17 +0200)]
samsung:misc: add call to get_board_name() for CONFIG_OF_MULTI
Change-Id: I236f5d23122f02ef759d7e79354a9af788627968
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 09:16:47 +0000 (11:16 +0200)]
fdtdec: add function: fdtdec_decode_memory()
This function can be used for decode memory node from device tree file.
Currently supports decoding of a single memory node with a multiple ranges
specified by the reg property with size of address and size cells specified
in a root node.
Function parameters:
- blob: ptr to device tree
- start: ptr to banks start address array
- size: ptr to banks size array
- max_banks: max number of banks to fill
Two of args: start or size can be NULL e.g. if only each bank size is needed.
Sample use case:
memory {
device_type = "memory";
reg = <0x40000000 ... 0x10000000 ...
0x50000000 ... 0x10000000 ...
... ... ... ...>;
};
Change-Id: I2f3defb89cf62d81377fb7882dbbae79b4472af2
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 09:00:34 +0000 (11:00 +0200)]
fdt_support: remove type static in fdt_read_prop()
Change-Id: Iaff9eff27dba6fc6f13d031a96f310361648acfd
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 23 Jul 2014 09:41:41 +0000 (11:41 +0200)]
arch:arm:dts: odroid/trats2: add memory device type
Change-Id: I80c42c8c390ccba1e748671b7f85d5b71371bbe9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 8 Jul 2014 10:47:25 +0000 (12:47 +0200)]
common:board_f:setup_fdt: set fdt addr by get_board_fdt() for CONFIG_OF_MULTI
Change-Id: I47039ce703c6bd8be18dc932ca67936f1ca5946b
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 13 Jun 2014 16:43:10 +0000 (18:43 +0200)]
f_thor: add missing ifdef for lcd menu
Change-Id: I13d0981ea07dcacdaef40aa0297db054694468ca
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 7 Apr 2014 15:21:13 +0000 (17:21 +0200)]
samsung: misc: menu: new option: battery charge level
This change adds new option to lcd menu which allows
check battery state. In case if battery level is greater
than boot level threshold (20%), battery screen is not
displayed. So this menu option is useful in such situations.
Change-Id: I13e7e57516766fea787855b914d2884343cc33a5
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 25 Mar 2014 11:32:22 +0000 (12:32 +0100)]
trats2: enable command battery of interactive charger
This change adds two features on trats2 device:
- show battery charge level by displaying battery screen
- manually start interactive charger if needed
Usage:
command: "battery"
options: "state" or "charge"
Change-Id: Ie000edfc2fb6f2938ddf1e17611fdc5045169830
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 24 Mar 2014 09:40:12 +0000 (10:40 +0100)]
trats2: add support to interactive charger
This commit adds support to interactive charger api which means an
implementation of listed functions:
- charger_enable() - enable the charger.Charger can be enabled
automatically if the device power on state
is triggered by USB cable connection.
- charger_type() - this function returns device type connected
to usb port of device. For charger api matters
only positive value.
- battery_present() - check if battery is connected (DETBAT pin)
- battery_state() - check battery charge level. Returns percent value.
- low_power_mode() - switch SOC into low power mode which covers:
- disable cores: 1, 2, 3,
- disable SOC unused power domains,
- decrease CPU clock to 200 MHz
After low_power_mode() function call, device should be restarted,
which is implemented in interactive charger.
Change-Id: I7e664fab29c45c2d29dc57a2faa887d88530d8f3
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 25 Mar 2014 11:27:05 +0000 (12:27 +0100)]
samsung: misc: new command: battery and config CONFIG_CMD_BATTERY
This feature allows to enable interactive charger by command line
or use interactive charger for display battery charge level.
Usage:
- battery [<state>] [<charge>]
Option "state" will display battery screen for 2 seconds.
Option "charge" will start interactive charger mode.
Interactive charger mode can be stopped by:
- pressing CTRL+C keys combination,
or device reset by:
- pressing PWR key for 5 seconds (only if SOC > 20% - one grey bar),
- pressing PWR key for 10 seconds, which is PMIC reset.
Change-Id: I622830198f6cba4f0fa30798b02aa003c55332bb
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Mar 2014 15:15:50 +0000 (16:15 +0100)]
samsung: misc: new feature: common interactive charger
This change adds common interactive charger feature with
display support.
New config: CONFIG_INTERACTIVE_CHARGER
New functions:
- battery() - which takes one of commands parameter:
BOOT_CHECK: check battery present, low power mode;
check battery charge level, draw battery screen
STATE: display battery screen with current state of charge
this is for command line use
CHARGE: start interactive charger for every battery charge level
this is also for command line use
- interactive_charger() - loop function for charge the battery and do:
- update of battery screen,
- update charge animation,
- check for exit condition (if charge level >= 20%)
- clear screen after 10 seconds animation
- draw battery on clean screen if any key pressed
There are few constants defined for this feature:
- CHARGE_TRESHOLD_BOOT: 20 (20 percent of charge)
- CHARGE_DISPLAY_TIMEOUT_SEC: 10 (time for animation display)
- CONNECT_CHARGER_TIMEOUT_SEC: 5 (time for connect charger animation)
- CHARGE_PWR_KEY_RESET_TIMEOUT: 3 (time for PWR key press to reset device)
Battery charge level cases:
- 0-20 % - don't allow to boot and then:
- enable charger if connected and start charge animation
or if no charger:
- display 5 sec charger animation and turn off the device
- > 20 % - don't display battery screen and boot device
Charge mode can be break by keys VOLUP + VOLDOWN. If charge level > 20%
then device can be enabled by pressing PWR key for a time defined in
CHARGE_PWR_KEY_RESET_TIMEOUT.
Change-Id: I15066a4b86c89f1f0124b072a0aeb7246b29b279
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 24 Mar 2014 14:26:10 +0000 (15:26 +0100)]
lib: tizen: add battery interactive charger screens
New images:
- battery frame: 200x380px, 16bpp,
batery level area in frame: 170x300px
- battery bar: 160x50px, 16bpp, grey and red,
(for 5 bars in battery frame with 8px interelement gap)
- charge screen; charge screen clean images: 128x120px, 16bpp
- charge screen indicator; vertical and horizontal
indicator clean images: 8x8px, 16bpp
Library functions:
For battery screen:
- draw_battery_screen() - draw empty battery frame
- draw_battery_state() - fill battery frame with charge bars
to a given percent
For charge animation:
- draw_charge_screen() - draw a small phone connected to a cable
(under the battery)
- clean_charge_screen() - cleans above screen
- draw_charge_animation() - display an animation with
a point running on a cable
(on a charge screen)
For low battery state and no charger connected:
- draw_connect_charger_animation() - draw and clean charge
screen respectively
Library is ready to use gzipped images
but this commit adds only bmp images.
Change-Id: I25a527b07b809b9105b6d4d8c29aa01e47224134
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Mar 2014 10:48:54 +0000 (11:48 +0100)]
trats2: add implementation of board_poweroff() and CONFIG_CMD_POWEROFF
This change adds implementation of function board_poweroff() which
turns off the device off by setting PSHOLD gpio to low state which
is a power off signal for main PMIC.
Change-Id: Iae97fb81d7e7e243079ac18d03f4fd917c50b62e
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 23 Apr 2014 12:57:19 +0000 (14:57 +0200)]
arch:arch:exynos: add exynos ps hold control output setting
Change-Id: I4ee074278c55198030aa5092f36e61e3c6efc487
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 9 Apr 2014 13:14:33 +0000 (15:14 +0200)]
arch:arm:exynos: clock.h define clock registers setting macros
Those macros are useful for easy setting clocks.
Change-Id: Ie167af1023fbbc8abb5dfbc6816b84721d2bcd0f
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 26 Mar 2014 15:00:54 +0000 (16:00 +0100)]
arch:arm:exynos: power.h define exynos4x12 power subsystem structure
Change-Id: Icf6cb80529f3fb5511e440f572e0870359e6e37c
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 9 Jun 2014 06:25:09 +0000 (08:25 +0200)]
common: add command power off - to switch off the device by command
This change introduces new config:
- CONFIG_CMD_POWEROFF - which enables common/cmd_poweroff.c
This requires implementation of function board_poweroff() which
is yet declared in include/common.h
Implementation of board_poweroff() should:
1.a. turn off the device
or
1.b. print info to user about turn off ability
2. never back to caller
Usage is simple: "power off"
Change-Id: Ia5fe73250e2ac29d0868b80bcd867bae2aa8d5be
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Chanho Park [Fri, 10 Jan 2014 01:48:52 +0000 (10:48 +0900)]
packaging: Adding .spec file for u-boot project
Change-Id: I5dd90f728a9f0f951afda5634f2509cbb3eccc95
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Jacek Pielaszkiewicz <j.pielaszkie@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Lukasz Majewski [Tue, 25 Mar 2014 16:33:34 +0000 (17:33 +0100)]
tools: dtc: Add source to build the dtc compiler
Newest u-boot (v2014.04) requires device tree compiler (DTC) version
at least 1.4.
Change-Id: Ie62778e3391cbf3b586221839cf53362c5f8cdff
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Inha Song [Fri, 21 Feb 2014 17:55:15 +0000 (18:55 +0100)]
trats/trats2: enable bootloader signature
Enable of this config will now require making binary signature.
From now, manually build sequence should looks like this:
CROSS_COMPILE=...
make mrproper
make trats2_config
make
./tools/mkimage_signed.sh u-boot-dtb.bin trats2_config
The output signed binary is: u-boot-mmc.bin
Change-Id: I9a2c86d2f24a050ff3738adb9dbd7d5914ff16d8
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Mon, 28 Oct 2013 06:52:53 +0000 (15:52 +0900)]
board:samsung: add u-boot-mmc.bin sign check to thor
Changes:
- add call to check_board_signature() before do dfu_write in thor downlaoder
new files:
- board/samsung/common/sig_header.c
- include/samsung/sighdr.h
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 10 Apr 2014 13:03:40 +0000 (15:03 +0200)]
tools: add script: mkimage_signed.sh for sign u-boot binary
This script appends given binary image by signature header.
Script takes two arguments:
- @arg1: binary name
- @arg2: config name
Script usage:
./mkimage_signed.sh binary.img config_name
e.g.:
./mkimage_signed.sh u-boot-dtb.bin trats2_config
Sign header is stored on last 512 bytes of input binary.
Maximum imput binary size is 1MB - 512 Bytes = 1048064 Bytes.
The maximum size is limited by first bootloader (s-boot).
Now it is configured to load exactly 2048 blocks (1MB).
Current u-boot-dtb.bin size for trats2 is less than 600 KBytes,
so the size limit should not be an issue.
Change-Id: Ia7472be693df8d4135312971d963d27f2ea20f0f
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 2 Apr 2014 14:13:59 +0000 (16:13 +0200)]
lib: tizen: thor screen update
Now cable connection message is displayed on thor screen.
When cable is connected then only unneeded lcd console lines are overwritten.
Main changes:
- add new function: draw_thor_connected()
- update function draw_thor_screen()
- usb: gadget: thor:
- move call to draw_thor_screen(),
- add call to draw_thor_connected()
other change:
- remove draw_thor_init_screen() function
Change-Id: Ifc33f63eeb4822551fc78af1c6dd2a03044cab7e
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 2 Apr 2014 13:21:06 +0000 (15:21 +0200)]
common: lcd: extend lcd api by function lcd_get_position_cursor()
This commit change the name of function lcd_position_cursor()
to lcd_set_position_cursor() and adds its complementary function
lcd_get_position_cursor().
This change is useful e.g. when user wants overwrite some lines,
words or even just a letter on lcd console screen.
Other changes:
- update previous lcd_position_cursor() calls
Change-Id: I4a102c236f2d2d5c238e9790382e4b9454e3c361
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Vadim Bendebury <vbendeb@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Inha Song [Fri, 11 Oct 2013 08:50:24 +0000 (17:50 +0900)]
usb: thor: add screen support
cmd_thordown.c:
- add libtizen header
- change error handling for thor init
- add call to draw_thor_fail_screen() on error
f_thor.c:
- thor_init(): return -EINTR on ctrl+c or if power key was pressed 3 times
- thor_rx_data(): return -EINTR when pressed ctrl+c on data receiving
- add display simple info screen before cable is not connected
- add display download screen when connection is established
- update download progress bar if data receiving
Change-Id: Ia89ef48c6c2faa5eda5dda5c5b3951e675eec03b
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 10 Feb 2014 15:28:30 +0000 (16:28 +0100)]
samsung: misc: check_keys(), key_pressed() - remove type static.
This patch removes type "static" from those functions declaration.
Change-Id: I2244ca3568b73251401e5102f26cc113ea69c1a4
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 7 Feb 2014 14:03:41 +0000 (15:03 +0100)]
libtizen: add download logo and download progress bar
Added features:
- add screen with exit info if no cable is connected
- download logo with progress bar after after THOR init
- downlaod failure screen on error
- PIT version, U-boot version on download screen
- function for update progess bar when downloading is going on
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 26 Feb 2014 08:17:45 +0000 (09:17 +0100)]
Trats: Setup: CLK_GATE_BLOCK - enable all clocks
This change allows boot kernel 3.10 on trats
Change-Id: Ic7f1672d9300a32fed9fa6d8f6fc30f118326a83
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Feb 2014 15:36:27 +0000 (16:36 +0100)]
Trats/Trats2: Update Tizen partitions layout
Change-Id: Ia229bdd6a04762e6c1b71509933d5d7723b9ebcb
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Hyungwon Hwang [Fri, 15 Nov 2013 07:10:42 +0000 (16:10 +0900)]
video:lcd:s6e8ax0: increase screen gamma.
Change gamma table to increase the brightness of s6e8ax0 panel.
Change-Id: I6b21022fb90bbb14160c0426a776d73c9590345b
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Lukasz Majewski [Mon, 9 Jun 2014 07:15:57 +0000 (09:15 +0200)]
config: exynos4: Reduce bootdelay from 3 to 1 second
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Tom Rini [Tue, 14 Oct 2014 08:47:15 +0000 (04:47 -0400)]
Prepare v2014.10
Signed-off-by: Tom Rini <trini@ti.com>
Hans de Goede [Mon, 13 Oct 2014 12:51:40 +0000 (14:51 +0200)]
sunxi: axp152: dcdc3 scale is 50mV / step not 25mV / step
Currently uboot wrongly uses 25mV / step for dcdc3, this is a copy and paste
error introduced when adding the axp152_mvolt_to_target during review of the
axp152.c driver. This results in u-boot setting Vddr to 2.3V instead of 1.5V.
This commit fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tom Rini [Mon, 13 Oct 2014 12:38:55 +0000 (08:38 -0400)]
Makefile: drop "tools-only" from no-dot-config-targets
With the introduction of CONFIG_LOCALVERSION support we cannot build
tools without having a config file (as we won't know our PLAIN_VERSION
until then).
Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Sat, 11 Oct 2014 00:59:28 +0000 (20:59 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert ARIBAUD [Fri, 10 Oct 2014 23:20:55 +0000 (01:20 +0200)]
Merge branch 'u-boot-socfpga/topic/arm/socfpga-
20141010' into 'u-boot-arm/master'
Albert ARIBAUD [Fri, 10 Oct 2014 23:20:30 +0000 (01:20 +0200)]
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Marek Vasut [Thu, 9 Oct 2014 23:50:23 +0000 (01:50 +0200)]
arm: socfpga: Use EMAC1 on SoCDK
The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Pavel Machek [Thu, 9 Oct 2014 23:50:22 +0000 (01:50 +0200)]
arm: socfpga: add MAINTAINERS entry
Add MAINTAINERS entry.
Signed-off-by: Pavel Machek <pavel@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Jeroen Hofstee [Tue, 7 Oct 2014 20:42:27 +0000 (22:42 +0200)]
tools: compiler.h: Fix build on FreeBSD
Commit 832472 "tools: socfpga: Add socfpga preloader signing
to mkimage" added tools/socfpga.c which relies on htole32,
le32toh and friends. While compiler.h includes these protypes
for linux from endian.h, it doesn't do so for FreeBSD. Hence
include <sys/endian.h> for FreeBSD.
Cc: Marek Vasut <marex@denx.de>
CC: Tom Rini <trini@ti.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Heiko Schocher [Wed, 1 Oct 2014 05:26:06 +0000 (07:26 +0200)]
arm, at91: add generic board support for the taurus and corvus board
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Bo Shen [Wed, 24 Sep 2014 07:35:53 +0000 (15:35 +0800)]
ARM: atmel: switch at91sam9263ek to generic board
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Andreas Bießmann [Thu, 18 Sep 2014 21:46:49 +0000 (23:46 +0200)]
sama5d3xek: run PHY's config
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Andreas Bießmann [Thu, 18 Sep 2014 21:46:48 +0000 (23:46 +0200)]
macb: simplify gmac initialisation
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Hans de Goede [Fri, 10 Oct 2014 16:30:17 +0000 (18:30 +0200)]
serial-uclass: Fix compilation error
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Khoronzhuk, Ivan [Thu, 9 Oct 2014 19:21:14 +0000 (22:21 +0300)]
ks2_evm: readme: align according to actual sources
Update readme file for Keystone II EVM boards to actual sources.
Also correct some typos. For now the Edison evaluation board is
added, README for K2E is mostly the same, so update README to
contain information also for K2E evm. Rename file to README as
it contains information for all keystone evm boards.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Murali Karicheri [Thu, 9 Oct 2014 19:20:36 +0000 (22:20 +0300)]
configs:ks2_evm: update defconfigs to support SPL
The K2HK and K2E boards support SPL by default, so add
CONFIG_SPL option. Also export CONFIG_ARM, CONFIG_ARCH_KEYSTONE
and TARGET_K2*_EVM options to spl/.config as they are the same.
So now it's convinient to build gph images using only two commands:
make k2hk_evm_defconfig
make u-boot-spi.gph
Acked-By: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Tom Rini [Fri, 10 Oct 2014 13:45:16 +0000 (09:45 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Tom Rini [Fri, 3 Oct 2014 19:57:00 +0000 (15:57 -0400)]
am335x_evm: Correct BOOTCOUNT driver support
We need to set the 'BE' flag here for things to work right.
Signed-off-by: Tom Rini <trini@ti.com>
Valentin Longchamp [Fri, 3 Oct 2014 09:16:19 +0000 (11:16 +0200)]
common/board_r: remove warning in initr_mem for 64-bit phys_size_t
Since on powerpc phys_size_t can be unsigned long long, this printout
line can result in a not nice compile warning.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Simon Glass <sjg@chromium.org>
Hannes Petermaier [Fri, 3 Oct 2014 05:30:15 +0000 (07:30 +0200)]
board/BuR: fix pinmux for MII Ethernet Interface
The lines COL (collision detect) and CRS (carrier sense) needs to be connected
and muxed to the CPSW MAC for a proper function in half-duplex Mode of the
interface.
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Cc: Tom Rini <trini@ti.com>
York Sun [Wed, 1 Oct 2014 15:44:55 +0000 (08:44 -0700)]
scripts/multiconfig.sh: Fix a typo
Fix the spelling of "configs".
Signed-off-by: York Sun <yorksun@freescale.com>
CC: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Jeroen Hofstee [Wed, 1 Oct 2014 15:22:58 +0000 (17:22 +0200)]
multiconfig.sh: replace GNU sed specific match
A SPL/TPL enabled target would was not recognized as
such by BSD sed, since it relies on a GNU extension.
Instead of or-ing just spell out both matches.
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 11:53:28 +0000 (13:53 +0200)]
VCMA9: remove EXT2 support
remove the seldomly used EXT2 support because the U-Boot binary will
not fit into the 512KiB flash otherwise.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 11:23:54 +0000 (13:23 +0200)]
PATI: fix broken SPI access
fix broken SPI access by adding/activating BOARD_EARLY_INIT_F
functionality and calling spi_init_f() from there.
Signed-off-by: David Müller <d.mueller@elsoft.ch>