review.tizen.org Git - platform/kernel/linux-starfive.git/log

netfilter: nf_tables: Fix entries val in rule reset audit log

The value in idx and the number of rules handled in that particular
__nf_tables_dump_rules() call is not identical. The former is a cursor
to pick up from if multiple netlink messages are needed, so its value is
ever increasing. Fixing this is not just a matter of subtracting s_idx
from it, though: When resetting rules in multiple chains,
__nf_tables_dump_rules() is called for each and cb->args[0] is not
adjusted in between. Introduce a dedicated counter to record the number
of rules reset in this call in a less confusing way.

While being at it, prevent the direct return upon buffer exhaustion: Any
rules previously dumped into that skb would evade audit logging
otherwise.

Fixes: 9b5ba5c9c5109 ("netfilter: nf_tables: Unbreak audit log reset")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: fix extension size table

The size table is incorrect due to copypaste error,
this reserves more size than needed.

TSTAMP reserved 32 instead of 16 bytes.
TIMEOUT reserved 16 instead of 8 bytes.

Fixes: 5f31edc0676b ("netfilter: conntrack: move extension sizes into core")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: disallow element removal on anonymous sets

Anonymous sets need to be populated once at creation and then they are
bound to rule since 938154b93be8 ("netfilter: nf_tables: reject unbound
anonymous set before commit phase"), otherwise transaction reports
EINVAL.

Userspace does not need to delete elements of anonymous sets that are
not yet bound, reject this with EOPNOTSUPP.

From flush command path, skip anonymous sets, they are expected to be
bound already. Otherwise, EINVAL is hit at the end of this transaction
for unbound sets.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_hash: try later when GC hits EAGAIN on iteration

Skip GC run if iterator rewinds to the beginning with EAGAIN, otherwise GC
might collect the same element more than once.

Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: stop GC iteration if GC transaction allocation fails

nft_trans_gc_queue_sync() enqueues the GC transaction and it allocates a
new one. If this allocation fails, then stop this GC sync run and retry
later.

Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC

pipapo needs to enqueue GC transactions for catchall elements through
nft_trans_gc_queue_sync(). Add nft_trans_gc_catchall_sync() and
nft_trans_gc_catchall_async() to handle GC transaction queueing
accordingly.

Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_rbtree: use read spinlock to avoid datapath contention

rbtree GC does not modify the datastructure, instead it collects expired
elements and it enqueues a GC transaction. Use a read spinlock instead
to avoid data contention while GC worker is running.

Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: disallow rule removal from chain binding

Chain binding only requires the rule addition/insertion command within
the same transaction. Removal of rules from chain bindings within the
same transaction makes no sense, userspace does not utilize this
feature. Replace nft_chain_is_bound() check to nft_chain_binding() in
rule deletion commands. Replace command implies a rule deletion, reject
this command too.

Rule flush command can also safely rely on this nft_chain_binding()
check because unbound chains are not allowed since 62e1e94b246e
("netfilter: nf_tables: reject unbound chain set before commit phase").

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()

enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().

Fixes: f0168042a212 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/582183ef-e03b-402b-8e2d-6d9bb3c83bd9@moroto.mountain/
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230906141609.247579-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "net: team: do not use dynamic lockdep key"

This reverts commit 39285e124edbc752331e98ace37cc141a6a3747a.

Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.

Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e124edb ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-23-09-06' of https://git./linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
netfilter updates for net

This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:

First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.

2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.

3rd patch adds a missing enum description, from Phil Sutter.

4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress.  Fix from Pablo Neira Ayuso.

Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.

Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.

netfilter pull request 2023-09-06

* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================

Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20230906072018.3020671-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: remove GSO partial feature bit

HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix the port information display when sfp is absent

When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.

Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue

We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.

However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.

This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix debugfs concurrency issue between kfree buffer and read

Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.

Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.

Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()

req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.

Convert tcam_data to (__le32 *) first to fix it.

Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: Support query tx timeout threshold by debugfs

support query tx timeout threshold by debugfs

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix tx timeout issue

Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.

Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)

The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.

The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.

To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.

Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.

Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-09-06

We've added 9 non-merge commits during the last 6 day(s) which contain
a total of 12 files changed, 189 insertions(+), 44 deletions(-).

The main changes are:

1) Fix bpf_sk_storage to address an invalid wait context lockdep
   report and another one to address missing omem uncharge,
   from Martin KaFai Lau.

2) Two BPF recursion detection related fixes,
   from Sebastian Andrzej Siewior.

3) Fix tailcall limit enforcement in trampolines for s390 JIT,
   from Ilya Leoshkevich.

4) Fix a sockmap refcount race where skbs in sk_psock_backlog can
   be referenced after user space side has already skb_consumed them,
   from John Fastabend.

5) Fix BPF CI flake/race wrt sockmap vsock write test where
   the transport endpoint is not connected, from Xu Kuohai.

6) Follow-up doc fix to address a cross-link warning,
   from Eduard Zingerman.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
  bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
  bpf, sockmap: Fix skb refcnt race after locking changes
  docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst
  selftests/bpf: Fix a CI failure caused by vsock write
====================

Link: https://lore.kernel.org/r/20230906095117.16941-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nf_tables: Unbreak audit log reset

Deliver audit log from __nf_tables_dump_rules(), table dereference at
the end of the table list loop might point to the list head, leading to
this crash.

[ 4137.407349] BUG: unable to handle page fault for address: 00000000001f3c50
[ 4137.407357] #PF: supervisor read access in kernel mode
[ 4137.407359] #PF: error_code(0x0000) - not-present page
[ 4137.407360] PGD 0 P4D 0
[ 4137.407363] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4137.407365] CPU: 4 PID: 500177 Comm: nft Not tainted 6.5.0+ #277
[ 4137.407369] RIP: 0010:string+0x49/0xd0
[ 4137.407374] Code: ff 77 36 45 89 d1 31 f6 49 01 f9 66 45 85 d2 75 19 eb 1e 49 39 f8 76 02 88 07 48 83 c7 01 83 c6 01 48 83 c2 01 4c 39 cf 74 07 <0f> b6 02 84 c0 75 e2 4c 89 c2 e9 58 e5 ff ff 48 c7 c0 0e b2 ff 81
[ 4137.407377] RSP: 0018:ffff8881179737f0 EFLAGS: 00010286
[ 4137.407379] RAX: 00000000001f2c50 RBX: ffff888117973848 RCX: ffff0a00ffffff04
[ 4137.407380] RDX: 00000000001f3c50 RSI: 0000000000000000 RDI: 0000000000000000
[ 4137.407381] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffffffff
[ 4137.407383] R10: ffffffffffffffff R11: ffff88813584d200 R12: 0000000000000000
[ 4137.407384] R13: ffffffffa15cf709 R14: 0000000000000000 R15: ffffffffa15cf709
[ 4137.407385] FS:  00007fcfc18bb580(0000) GS:ffff88840e700000(0000) knlGS:0000000000000000
[ 4137.407387] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4137.407388] CR2: 00000000001f3c50 CR3: 00000001055b2001 CR4: 00000000001706e0
[ 4137.407390] Call Trace:
[ 4137.407392]  <TASK>
[ 4137.407393]  ? __die+0x1b/0x60
[ 4137.407397]  ? page_fault_oops+0x6b/0xa0
[ 4137.407399]  ? exc_page_fault+0x60/0x120
[ 4137.407403]  ? asm_exc_page_fault+0x22/0x30
[ 4137.407408]  ? string+0x49/0xd0
[ 4137.407410]  vsnprintf+0x257/0x4f0
[ 4137.407414]  kvasprintf+0x3e/0xb0
[ 4137.407417]  kasprintf+0x3e/0x50
[ 4137.407419]  nf_tables_dump_rules+0x1c0/0x360 [nf_tables]
[ 4137.407439]  ? __alloc_skb+0xc3/0x170
[ 4137.407442]  netlink_dump+0x170/0x330
[ 4137.407447]  __netlink_dump_start+0x227/0x300
[ 4137.407449]  nf_tables_getrule+0x205/0x390 [nf_tables]

Deliver audit log only once at the end of the rule dump+reset for
consistency with the set dump+reset.

Ensure audit reset access to table under rcu read side lock. The table
list iteration holds rcu read lock side, but recent audit code
dereferences table object out of the rcu read lock side.

Fixes: ea078ae9108e ("netfilter: nf_tables: Audit log rule reset")
Fixes: 7e9be1124dbe ("netfilter: nf_tables: Audit log setelem reset")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c

The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction

New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element.

Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID

Add a brief description to the enum's comment.

Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nfnetlink_osf: avoid OOB read

The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.

BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431

CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
expr_call_ops_eval net/netfilter/nf_tables_core.c:214
nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
[..]

Also add validation to genre, subtype and version fields.

Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nftables: exthdr: fix 4-byte stack OOB write

If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.

This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.

The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.

Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Fixes: 935b7f643018 ("netfilter: nft_exthdr: add TCP option matching")
Fixes: 133dc203d77d ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Florian Westphal <fw@strlen.de>

selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc

This patch checks the sk_omem_alloc has been uncharged by bpf_sk_storage
during the __sk_destruct.

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-4-martin.lau@linux.dev

bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc

The commit c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.

This missing uncharge only happens when the sk is going away (during
__sk_destruct).

This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.

A selftest is added in the next patch.

Fixes: c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev

bpf: bpf_sk_storage: Fix invalid wait context lockdep report

'./test_progs -t test_local_storage' reported a splat:

[   27.137569] =============================
[   27.138122] [ BUG: Invalid wait context ]
[   27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G           O
[   27.139542] -----------------------------
[   27.140106] test_progs/1729 is trying to lock:
[   27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[   27.141834] other info that might help us debug this:
[   27.142437] context-{5:5}
[   27.142856] 2 locks held by test_progs/1729:
[   27.143352]  #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[   27.144492]  #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[   27.145855] stack backtrace:
[   27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G           O       6.5.0-03980-gd11ae1b16b0a #247
[   27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[   27.149127] Call Trace:
[   27.149490]  <TASK>
[   27.149867]  dump_stack_lvl+0x130/0x1d0
[   27.152609]  dump_stack+0x14/0x20
[   27.153131]  __lock_acquire+0x1657/0x2220
[   27.153677]  lock_acquire+0x1b8/0x510
[   27.157908]  local_lock_acquire+0x29/0x130
[   27.159048]  obj_cgroup_charge+0xf4/0x3c0
[   27.160794]  slab_pre_alloc_hook+0x28e/0x2b0
[   27.161931]  __kmem_cache_alloc_node+0x51/0x210
[   27.163557]  __kmalloc+0xaa/0x210
[   27.164593]  bpf_map_kzalloc+0xbc/0x170
[   27.165147]  bpf_selem_alloc+0x130/0x510
[   27.166295]  bpf_local_storage_update+0x5aa/0x8e0
[   27.167042]  bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[   27.169199]  bpf_map_update_value+0x415/0x4f0
[   27.169871]  map_update_elem+0x413/0x550
[   27.170330]  __sys_bpf+0x5e9/0x640
[   27.174065]  __x64_sys_bpf+0x80/0x90
[   27.174568]  do_syscall_64+0x48/0xa0
[   27.175201]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[   27.175932] RIP: 0033:0x7effb40e41ad
[   27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[   27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[   27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[   27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[   27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[   27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[   27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[   27.184958]  </TASK>

It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.

raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.

The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.

This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.

This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.

Fixes: b00fa38a9c1c ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev

s390/bpf: Pass through tail call counter in trampolines

s390x eBPF programs use the following extension to the s390x calling
convention: tail call counter is passed on stack at offset
STK_OFF_TCCNT, which callees otherwise use as scratch space.

Currently trampoline does not respect this and clobbers tail call
counter. This breaks enforcing tail call limits in eBPF programs, which
have trampolines attached to them.

Fix by forwarding a copy of the tail call counter to the original eBPF
program in the trampoline (for fexit), and by restoring it at the end
of the trampoline (for fentry).

Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: Leon Hwang <hffilwlqm@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230906004448.111674-1-iii@linux.ibm.com

bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.

__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.

__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.

Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.

Fixes: e384c7b7b46d0 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de

bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().

If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).

This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.

Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.

Fixes: b1d18a7574d0d ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de

net: phylink: fix sphinx complaint about invalid literal

sphinx complains about the use of "%PHYLINK_PCS_NEG_*":

Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string.
Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string.

These are not valid symbols so drop the '%' prefix.

Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *)
or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already
a handful of un-adorned DEFINE_* in this file.

Fixes: f99d471afa03 ("net: phylink: add PCS negotiation mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sja1105-fixes'

Vladimir Oltean says:

====================
tc-cbs offload fixes for SJA1105 DSA

Yanan Yang has pointed out to me that certain tc-cbs offloaded
configurations do not appear to do any shaping on the LS1021A-TSN board
(SJA1105T).

This is due to an apparent documentation error that also made its way
into the driver, which patch 1/3 now fixes.

While investigating and then testing, I've found 2 more bugs, which are
patches 2/3 and 3/3.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: complete tc-cbs offload support on SJA1110

The blamed commit left this delta behind:

  struct sja1105_cbs_entry {
- u64 port;
- u64 prio;
+ u64 port; /* Not used for SJA1110 */
+ u64 prio; /* Not used for SJA1110 */
   u64 credit_hi;
   u64 credit_lo;
   u64 send_slope;
   u64 idle_slope;
  };

but did not actually implement tc-cbs offload fully for the new switch.
The offload is accepted, but it doesn't work.

The difference compared to earlier switch generations is that now, the
table of CBS shapers is sparse, because there are many more shapers, so
the mapping between a {port, prio} and a table index is static, rather
than requiring us to store the port and prio into the sja1105_cbs_entry.

So, the problem is that the code programs the CBS shaper parameters at a
dynamic table index which is incorrect.

All that needs to be done for SJA1110 CBS shapers to work is to bypass
the logic which allocates shapers in a dense manner, as for SJA1105, and
use the fixed mapping instead.

Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many times

After running command [2] too many times in a row:

[1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
[2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \
idleslope 120000 sendslope -880000 locredit -1320 hicredit 180

(aka more than priv->info->num_cbs_shapers times)

we start seeing the following error message:

Error: Specified device failed to setup cbs hardware offload.

This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.

Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload

More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.

The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.

The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".

Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".

So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.

I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.

So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.

Some numerical data points:

40Mbps stream, max interfering frame size 1500, port speed 100M
---------------------------------------------------------------

tc-cbs parameters:
idleslope 40000 sendslope -60000 locredit -900 hicredit 600

which result in hardware values:

Before (doesn't work)           After (works)
credit_hi    600                600
credit_lo    900                900
send_slope   7500000            75
idle_slope   5000000            50

40Mbps stream, max interfering frame size 1500, port speed 1G
-------------------------------------------------------------

tc-cbs parameters:
idleslope 40000 sendslope -960000 locredit -1440 hicredit 60

which result in hardware values:

Before (doesn't work)           After (works)
credit_hi    60                 60
credit_lo    1440               1440
send_slope   120000000          120
idle_slope   5000000            5

5.12Mbps stream, max interfering frame size 1522, port speed 100M
-----------------------------------------------------------------

tc-cbs parameters:
idleslope 5120 sendslope -94880 locredit -1444 hicredit 77

which result in hardware values:

Before (doesn't work)           After (works)
credit_hi    77                 77
credit_lo    1444               1444
send_slope   11860000           118
idle_slope   640000             6

Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.

Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Change MIN_TXD and MIN_RXD to allow set rx/tx value between 64 and 80

Olga Zaborska says:

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb, igbvf and igc devices can use as low as 64
descriptors.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mlx5/core: E-Switch, Create ACL FT for eswitch manager in switchdev mode

ACL flow table is required in switchdev mode when metadata is enabled,
driver creates such table when loading each vport. However, not every
vport is loaded in switchdev mode. Such as ECPF if it's the eswitch manager.
In this case, ACL flow table is still needed.

To make it modularized, create ACL flow table for eswitch manager as
default and skip such operations when loading manager vport.

Also, there is no need to load the eswitch manager vport in switchdev mode.
This means there is no need to load it on regular connect-x HCAs where
the PF is the eswitch manager. This will avoid creating duplicate ACL
flow table for host PF vport.

Fixes: 29bcb6e4fe70 ("net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules")
Fixes: eb8e9fae0a22 ("mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager")
Fixes: 5019833d661f ("net/mlx5: E-switch, Introduce helper function to enable/disable vports")
Signed-off-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Clear mirred devices array if the rule is split

In the cited commit, the mirred devices are recorded and checked while
parsing the actions. In order to avoid system crash, the duplicate
action in a single rule is not allowed.

But the rule is actually break down into several FTEs in different
tables, for either mirroring, or the specified types of actions which
use post action infrastructure.

It will reject certain action list by mistake, for example:
actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1.
Here the rule is split to two FTEs because of pedit action.

To fix this issue, when parsing the rule actions, reset if_count to
clear the mirred devices array if the rule is split to multiple
FTEs, and then the duplicate checking is restarted.

Fixes: 554fe75c1b3f ("net/mlx5e: Avoid duplicating rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_tunnels: use DEV_STATS_INC()

syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1]

This can run from multiple cpus without mutual exclusion.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

[1]
BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit

read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000018830 -> 0x0000000000018831

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0

Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: team: do not use dynamic lockdep key

team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
  |
team1

Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.

So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.

When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.

In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.

As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.

The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.

The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.

Reproducer:
   for i in {0..1000}
   do
           ip link add team$i type team
           ip link add dummy$i master team$i type dummy
           ip link set dummy$i up
           ip link set team$i up
   done

Splat looks like:
   BUG: MAX_LOCKDEP_ENTRIES too low!
   turning off the locking correctness validator.
   Please attach the output of /proc/lock_stat to the bug report
   CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
   Call Trace:
    <TASK>
   dump_stack_lvl+0x64/0xb0
   add_lock_to_list+0x30d/0x5e0
   check_prev_add+0x73a/0x23a0
   ...
   sock_def_readable+0xfe/0x4f0
   netlink_broadcast+0x76b/0xac0
   nlmsg_notify+0x69/0x1d0
   dev_open+0xed/0x130
   ...

Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes: 369f61bee0f5 ("team: fix nested locking lockdep warning")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: SKB symmetric hash should incorporate transport ports

__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db875671
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.

As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.

Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.

Fixes: eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457
Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igb: Change IGB_MIN to allow set rx/tx value between 64 and 80

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")

Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")

Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Change IGC_MIN to allow set rx/tx value between 64 and 80

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")

Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

octeontx2-af: Fix truncation of smq in CN10K NIX AQ enqueue mbox handler

The smq value used in the CN10K NIX AQ instruction enqueue mailbox
handler was truncated to 9-bit value from 10-bit value because of
typecasting the CN10K mbox request structure to the CN9K structure.
Though this hasn't caused any problems when programming the NIX SQ
context to the HW because the context structure is the same size.
However, this causes a problem when accessing the structure parameters.
This patch reads the right smq value for each platform.

Fixes: 30077d210c83 ("octeontx2-af: cn10k: Update NIX/NPA context structure")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.

Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.

Fixes: 57e1ab6eaddc ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: macsec: preserve ingress frame ordering"

This reverts commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b.

It was trying to work around an issue at the crypto layer by excluding
ASYNC implementations of gcm(aes), because a bug in the AESNI version
caused reordering when some requests bypassed the cryptd queue while
older requests were still pending on the queue.

This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd
reordering problem on gcm"), which pre-dates ab046a5d4be4.

Herbert Xu confirmed that all ASYNC implementations are expected to
maintain the ordering of completions wrt requests, so we can use them
in MACsec.

On my test machine, this restores the performance of a single netperf
instance, from 1.4Gbps to 4.4Gbps.

Link: https://lore.kernel.org/netdev/9328d206c5d9f9239cae27e62e74de40b258471d.1692279161.git.sd@queasysnail.net/T/
Link: https://lore.kernel.org/netdev/1b0cec71-d084-8153-2ba4-72ce71abeb65@byu.edu/
Link: https://lore.kernel.org/netdev/d335ddaa-18dc-f9f0-17ee-9783d3b2ca29@mailbox.tu-dresden.de/
Fixes: ab046a5d4be4 ("net: macsec: preserve ingress frame ordering")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/11c952469d114db6fb29242e1d9545e61f52f512.1693757159.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

kcm: Destroy mutex in kcm_exit_net()

kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially
needed if CONFIG_DEBUG_MUTEXES is enabled.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: sched: sch_qfq: Fix UAF in qfq_dequeue()

When the plug qdisc is used as a class of the qfq qdisc it could trigger a
UAF. This issue can be reproduced with following commands:

  tc qdisc add dev lo root handle 1: qfq
  tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512
  tc qdisc add dev lo parent 1:1 handle 2: plug
  tc filter add dev lo parent 1: basic classid 1:1
  ping -c1 127.0.0.1

and boom:

[  285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0
[  285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144
[  285.355903]
[  285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4
[  285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[  285.358376] Call Trace:
[  285.358773]  <IRQ>
[  285.359109]  dump_stack_lvl+0x44/0x60
[  285.359708]  print_address_description.constprop.0+0x2c/0x3c0
[  285.360611]  kasan_report+0x10c/0x120
[  285.361195]  ? qfq_dequeue+0xa7/0x7f0
[  285.361780]  qfq_dequeue+0xa7/0x7f0
[  285.362342]  __qdisc_run+0xf1/0x970
[  285.362903]  net_tx_action+0x28e/0x460
[  285.363502]  __do_softirq+0x11b/0x3de
[  285.364097]  do_softirq.part.0+0x72/0x90
[  285.364721]  </IRQ>
[  285.365072]  <TASK>
[  285.365422]  __local_bh_enable_ip+0x77/0x90
[  285.366079]  __dev_queue_xmit+0x95f/0x1550
[  285.366732]  ? __pfx_csum_and_copy_from_iter+0x10/0x10
[  285.367526]  ? __pfx___dev_queue_xmit+0x10/0x10
[  285.368259]  ? __build_skb_around+0x129/0x190
[  285.368960]  ? ip_generic_getfrag+0x12c/0x170
[  285.369653]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  285.370390]  ? csum_partial+0x8/0x20
[  285.370961]  ? raw_getfrag+0xe5/0x140
[  285.371559]  ip_finish_output2+0x539/0xa40
[  285.372222]  ? __pfx_ip_finish_output2+0x10/0x10
[  285.372954]  ip_output+0x113/0x1e0
[  285.373512]  ? __pfx_ip_output+0x10/0x10
[  285.374130]  ? icmp_out_count+0x49/0x60
[  285.374739]  ? __pfx_ip_finish_output+0x10/0x10
[  285.375457]  ip_push_pending_frames+0xf3/0x100
[  285.376173]  raw_sendmsg+0xef5/0x12d0
[  285.376760]  ? do_syscall_64+0x40/0x90
[  285.377359]  ? __static_call_text_end+0x136578/0x136578
[  285.378173]  ? do_syscall_64+0x40/0x90
[  285.378772]  ? kasan_enable_current+0x11/0x20
[  285.379469]  ? __pfx_raw_sendmsg+0x10/0x10
[  285.380137]  ? __sock_create+0x13e/0x270
[  285.380673]  ? __sys_socket+0xf3/0x180
[  285.381174]  ? __x64_sys_socket+0x3d/0x50
[  285.381725]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.382425]  ? __rcu_read_unlock+0x48/0x70
[  285.382975]  ? ip4_datagram_release_cb+0xd8/0x380
[  285.383608]  ? __pfx_ip4_datagram_release_cb+0x10/0x10
[  285.384295]  ? preempt_count_sub+0x14/0xc0
[  285.384844]  ? __list_del_entry_valid+0x76/0x140
[  285.385467]  ? _raw_spin_lock_bh+0x87/0xe0
[  285.386014]  ? __pfx__raw_spin_lock_bh+0x10/0x10
[  285.386645]  ? release_sock+0xa0/0xd0
[  285.387148]  ? preempt_count_sub+0x14/0xc0
[  285.387712]  ? freeze_secondary_cpus+0x348/0x3c0
[  285.388341]  ? aa_sk_perm+0x177/0x390
[  285.388856]  ? __pfx_aa_sk_perm+0x10/0x10
[  285.389441]  ? check_stack_object+0x22/0x70
[  285.390032]  ? inet_send_prepare+0x2f/0x120
[  285.390603]  ? __pfx_inet_sendmsg+0x10/0x10
[  285.391172]  sock_sendmsg+0xcc/0xe0
[  285.391667]  __sys_sendto+0x190/0x230
[  285.392168]  ? __pfx___sys_sendto+0x10/0x10
[  285.392727]  ? kvm_clock_get_cycles+0x14/0x30
[  285.393328]  ? set_normalized_timespec64+0x57/0x70
[  285.393980]  ? _raw_spin_unlock_irq+0x1b/0x40
[  285.394578]  ? __x64_sys_clock_gettime+0x11c/0x160
[  285.395225]  ? __pfx___x64_sys_clock_gettime+0x10/0x10
[  285.395908]  ? _copy_to_user+0x3e/0x60
[  285.396432]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.397086]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.397734]  ? do_syscall_64+0x71/0x90
[  285.398258]  __x64_sys_sendto+0x74/0x90
[  285.398786]  do_syscall_64+0x64/0x90
[  285.399273]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.399949]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.400605]  ? do_syscall_64+0x71/0x90
[  285.401124]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.401807] RIP: 0033:0x495726
[  285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09
[  285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726
[  285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000
[  285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c
[  285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634
[  285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000
[  285.410403]  </TASK>
[  285.410704]
[  285.410929] Allocated by task 144:
[  285.411402]  kasan_save_stack+0x1e/0x40
[  285.411926]  kasan_set_track+0x21/0x30
[  285.412442]  __kasan_slab_alloc+0x55/0x70
[  285.412973]  kmem_cache_alloc_node+0x187/0x3d0
[  285.413567]  __alloc_skb+0x1b4/0x230
[  285.414060]  __ip_append_data+0x17f7/0x1b60
[  285.414633]  ip_append_data+0x97/0xf0
[  285.415144]  raw_sendmsg+0x5a8/0x12d0
[  285.415640]  sock_sendmsg+0xcc/0xe0
[  285.416117]  __sys_sendto+0x190/0x230
[  285.416626]  __x64_sys_sendto+0x74/0x90
[  285.417145]  do_syscall_64+0x64/0x90
[  285.417624]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.418306]
[  285.418531] Freed by task 144:
[  285.418960]  kasan_save_stack+0x1e/0x40
[  285.419469]  kasan_set_track+0x21/0x30
[  285.419988]  kasan_save_free_info+0x27/0x40
[  285.420556]  ____kasan_slab_free+0x109/0x1a0
[  285.421146]  kmem_cache_free+0x1c2/0x450
[  285.421680]  __netif_receive_skb_core+0x2ce/0x1870
[  285.422333]  __netif_receive_skb_one_core+0x97/0x140
[  285.423003]  process_backlog+0x100/0x2f0
[  285.423537]  __napi_poll+0x5c/0x2d0
[  285.424023]  net_rx_action+0x2be/0x560
[  285.424510]  __do_softirq+0x11b/0x3de
[  285.425034]
[  285.425254] The buggy address belongs to the object at ffff8880bad31280
[  285.425254]  which belongs to the cache skbuff_head_cache of size 224
[  285.426993] The buggy address is located 40 bytes inside of
[  285.426993]  freed 224-byte region [ffff8880bad31280, ffff8880bad31360)
[  285.428572]
[  285.428798] The buggy address belongs to the physical page:
[  285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31
[  285.430758] flags: 0x100000000000200(slab|node=0|zone=1)
[  285.431447] page_type: 0xffffffff()
[  285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000
[  285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
[  285.433562] page dumped because: kasan: bad access detected
[  285.434144]
[  285.434320] Memory state around the buggy address:
[  285.434828]  ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.435580]  ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  285.436777]                                   ^
[  285.437106]  ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  285.437616]  ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.438126] ==================================================================
[  285.438662] Disabling lock debugging due to kernel taint

Fix this by:
1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a
function compatible with non-work-conserving qdiscs
2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq.

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: valis <sec@valis.email>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'af_unix-data-races'

Kuniyuki Iwashima says:

====================
af_unix: Fix four data-races.

While running syzkaller, KCSAN reported 3 data-races with
systemd-coredump using AF_UNIX sockets.

This series fixes the three and another one inspiered by
one of the reports.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data race around sk->sk_err.

As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().

Let's use READ_ONCE() for sk_err as well.

Note that the writer side is marked by commit cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data-races around sk->sk_shutdown.

sk->sk_shutdown is changed under unix_state_lock(sk), but
unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly.

sock_alloc_send_pskb
`- sock_wait_for_wmem

Let's use READ_ONCE() there.

Note that the writer side was marked by commit e1d09c2c2f57 ("af_unix:
Fix data races around sk->sk_shutdown.").

BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock

write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1053
__sock_release+0x7d/0x170 net/socket.c:654
sock_close+0x19/0x30 net/socket.c:1386
__fput+0x2a3/0x680 fs/file_table.c:384
____fput+0x15/0x20 fs/file_table.c:412
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0:
sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767
unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x00 -> 0x03

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data-race around unix_tot_inflight.

unix_tot_inflight is changed under spin_lock(unix_gc_lock), but
unix_release_sock() reads it locklessly.

Let's use READ_ONCE() for unix_tot_inflight.

Note that the writer side was marked by commit 9d6d7f1cb67c ("af_unix:
annote lockless accesses to unix_tot_inflight & gc_in_progress")

BUG: KCSAN: data-race in unix_inflight / unix_release_sock

write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1:
unix_inflight+0x130/0x180 net/unix/scm.c:64
unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1832 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:747
____sys_sendmsg+0x4e4/0x610 net/socket.c:2493
___sys_sendmsg+0xc6/0x140 net/socket.c:2547
__sys_sendmsg+0x94/0x140 net/socket.c:2576
__do_sys_sendmsg net/socket.c:2585 [inline]
__se_sys_sendmsg net/socket.c:2583 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2583
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0:
unix_release_sock+0x608/0x910 net/unix/af_unix.c:671
unix_release+0x59/0x80 net/unix/af_unix.c:1058
__sock_release+0x7d/0x170 net/socket.c:653
sock_close+0x19/0x30 net/socket.c:1385
__fput+0x179/0x5e0 fs/file_table.c:321
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 9305cfa4443d ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data-races around user->unix_inflight.

user->unix_inflight is changed under spin_lock(unix_gc_lock),
but too_many_unix_fds() reads it locklessly.

Let's annotate the write/read accesses to user->unix_inflight.

BUG: KCSAN: data-race in unix_attach_fds / unix_inflight

write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1:
unix_inflight+0x157/0x180 net/unix/scm.c:66
unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0:
too_many_unix_fds net/unix/scm.c:101 [inline]
unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x000000000000000c -> 0x000000000000000d

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 712f4aad406b ("unix: properly account for FDs passed over unix sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix msg_controllen test in scm_pidfd_recv() for MSG_CMSG_COMPAT.

Heiko Carstens reported that SCM_PIDFD does not work with MSG_CMSG_COMPAT
because scm_pidfd_recv() always checks msg_controllen against sizeof(struct
cmsghdr).

We need to use sizeof(struct compat_cmsghdr) for the compat case.

Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/20230901200517.8742-A-hca@linux.ibm.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: update the netdev infra URLs

Some corporate proxies block our current NIPA URLs because
they use a free / shady DNS domain. As suggested by Jesse
we got a new DNS entry from Konstantin - netdev.bots.linux.dev,
use it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: document patchwork patch states

The patchwork states are largely self-explanatory but small
ambiguities may still come up. Document how we interpret
the states in networking.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf, sockmap: Fix skb refcnt race after locking changes

There is a race where skb's from the sk_psock_backlog can be referenced
after userspace side has already skb_consumed() the sk_buff and its refcnt
dropped to zer0 causing use after free.

The flow is the following:

  while ((skb = skb_peek(&psock->ingress_skb))
    sk_psock_handle_Skb(psock, skb, ..., ingress)
    if (!ingress) ...
    sk_psock_skb_ingress
       sk_psock_skb_ingress_enqueue(skb)
          msg->skb = skb
          sk_psock_queue_msg(psock, msg)
    skb_dequeue(&psock->ingress_skb)

The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is
what the application reads when recvmsg() is called. An application can
read this anytime after the msg is placed on the queue. The recvmsg hook
will also read msg->skb and then after user space reads the msg will call
consume_skb(skb) on it effectively free'ing it.

But, the race is in above where backlog queue still has a reference to
the skb and calls skb_dequeue(). If the skb_dequeue happens after the
user reads and free's the skb we have a use after free.

The !ingress case does not suffer from this problem because it uses
sendmsg_*(sk, msg) which does not pass the sk_buff further down the
stack.

The following splat was observed with 'test_progs -t sockmap_listen':

  [ 1022.710250][ T2556] general protection fault, ...
  [...]
  [ 1022.712830][ T2556] Workqueue: events sk_psock_backlog
  [ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80
  [ 1022.713653][ T2556] Code: ...
  [...]
  [ 1022.720699][ T2556] Call Trace:
  [ 1022.720984][ T2556]  <TASK>
  [ 1022.721254][ T2556]  ? die_addr+0x32/0x80^M
  [ 1022.721589][ T2556]  ? exc_general_protection+0x25a/0x4b0
  [ 1022.722026][ T2556]  ? asm_exc_general_protection+0x22/0x30
  [ 1022.722489][ T2556]  ? skb_dequeue+0x4c/0x80
  [ 1022.722854][ T2556]  sk_psock_backlog+0x27a/0x300
  [ 1022.723243][ T2556]  process_one_work+0x2a7/0x5b0
  [ 1022.723633][ T2556]  worker_thread+0x4f/0x3a0
  [ 1022.723998][ T2556]  ? __pfx_worker_thread+0x10/0x10
  [ 1022.724386][ T2556]  kthread+0xfd/0x130
  [ 1022.724709][ T2556]  ? __pfx_kthread+0x10/0x10
  [ 1022.725066][ T2556]  ret_from_fork+0x2d/0x50
  [ 1022.725409][ T2556]  ? __pfx_kthread+0x10/0x10
  [ 1022.725799][ T2556]  ret_from_fork_asm+0x1b/0x30
  [ 1022.726201][ T2556]  </TASK>

To fix we add an skb_get() before passing the skb to be enqueued in the
engress queue. This bumps the skb->users refcnt so that consume_skb()
and kfree_skb will not immediately free the sk_buff. With this we can
be sure the skb is still around when we do the dequeue. Then we just
need to decrement the refcnt or free the skb in the backlog case which
we do by calling kfree_skb() on the ingress case as well as the sendmsg
case.

Before locking change from fixes tag we had the sock locked so we
couldn't race with user and there was no issue here.

Fixes: 799aa7f98d53e ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Xu Kuohai <xukuohai@huawei.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230901202137.214666-1-john.fastabend@gmail.com

net: phy: micrel: Correct bit assignments for phy_device flags

Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:

- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
  with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
  the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
  triggered for KSZ88xx.

To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.

Fixes: 49011e0c1555 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr

The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.

Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

veth: Fixing transmit return status for dropped packets

The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.

Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: fix frag_list chaining

gve_rx_append_frags() is able to build skbs chained with frag_list,
like GRO engine.

Problem is that shinfo->frag_list should only be used
for the head of the chain.

All other links should use skb->next pointer.

Otherwise, built skbs are not valid and can cause crashes.

Equivalent code in GRO (skb_gro_receive()) is:

    if (NAPI_GRO_CB(p)->last == p)
        skb_shinfo(p)->frag_list = skb;
    else
        NAPI_GRO_CB(p)->last->next = skb;
    NAPI_GRO_CB(p)->last = skb;

Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bailey Forrest <bcf@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Catherine Sullivan <csully@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: deal with integer overflows in kmalloc_reserve()

Blamed commit changed:
    ptr = kmalloc(size);
    if (ptr)
      size = ksize(ptr);

to:
    size = kmalloc_size_roundup(size);
    ptr = kmalloc(size);

This allowed various crash as reported by syzbot [1]
and Kyle Zeng.

Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.

kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.

kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.

Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff

We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).

This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.

[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554

CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584

Fixes: 12d6c1d3a2ad ("skbuff: Proactively round up to kmalloc bucket size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

igb: disable virtualization features on 82580

Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.

Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst

scripts/documentation-file-ref-check reports warnings for (valid) cross-links
of form:

:ref:`Documentation/bpf/btf <BTF_Ext_Section>`

Adding extension to the file name helps to avoid the warning, e.g:

:ref:`Documentation/bpf/btf.rst <BTF_Ext_Section>`

Fixes: be4033d36070 ("docs/bpf: Add description for CO-RE relocations")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202309010804.G3MpXo59-lkp@intel.com
Link: https://lore.kernel.org/bpf/20230901125935.487972-1-eddyz87@gmail.com

selftests/bpf: Fix a CI failure caused by vsock write

While commit 90f0074cd9f9 ("selftests/bpf: fix a CI failure caused by vsock sockmap test")
fixes a receive failure of vsock sockmap test, there is still a write failure:

Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
  ./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
  vsock_unix_redir_connectible:FAIL:1501
  ./test_progs:vsock_unix_redir_connectible:1501: ingress: write: Transport endpoint is not connected
  vsock_unix_redir_connectible:FAIL:1501
  ./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
  vsock_unix_redir_connectible:FAIL:1501

The reason is that the vsock connection in the test is set to ESTABLISHED state
by function virtio_transport_recv_pkt, which is executed in a workqueue thread,
so when the user space test thread runs before the workqueue thread, this
problem occurs.

To fix it, before writing the connection, wait for it to be connected.

Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901031037.3314007-1-xukuohai@huaweicloud.com

sfc: check for zero length in EF10 RX prefix

When EF10 RXDP firmware is operating in cut-through mode, packet length
is not known at the time the RX prefix is generated, so it is left as
zero and RX event merging is inhibited to ensure that the length is
available in the RX event. However, it has been found that in certain
circumstances the RX events for these packets still get merged,
meaning the driver cannot read the length from the RX event, and tries
to use the length from the prefix.
The resulting zero-length SKBs cause crashes in GRO since commit
1d11fa696733 ("net-gro: remove GRO_DROP"), so add a check to the driver
to detect these zero-length RX events and discard the packet.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dst-hint-multipath'

Sriram Yagnaraman says:

====================
Avoid TCP resets when using ECMP for load-balancing between multiple servers.

All packets in the same flow (L3/L4 depending on multipath hash policy)
should be directed to the same target, but after [0]/[1] we see stray
packets directed towards other targets. This, for instance, causes RST
to be sent on TCP connections.

The first two patches solve the problem by ignoring route hints for
destinations that are part of multipath group, by using new SKB flags
for IPv4 and IPv6. The third patch is a selftest that tests the
scenario.

Thanks to Ido, for reviewing and suggesting a way forward in [2] and
also suggesting how to write a selftest for this.

v4->v5:
- Fixed review comments from Ido
v3->v4:
- Remove single path test
- Rebase to latest
v2->v3:
- Add NULL check for skb in fib6_select_path (Ido Schimmel)
- Use fib_tests.sh for selftest instead of the forwarding suite (Ido
Schimmel)
v1->v2:
- Update to commit messages describing the solution (Ido Schimmel)
- Use perf stat to count fib table lookups in selftest (Ido Schimmel)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: fib_tests: Add multipath list receive tests

The test uses perf stat to count the number of fib:fib_table_lookup
tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for
IPv6. The measured count is checked to be within 5% of the total number
of packets sent via veth1.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: ignore dst hint for multipath routes

Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.

A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in fib6_select_path() and use it in
ip6_can_use_hint() to check for the existence of the flag.

Fixes: 197dbf24e360 ("ipv6: introduce and uses route look hints for list input.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: ignore dst hint for multipath routes

Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.

A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.

Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

skbuff: skb_segment, Call zero copy functions before using skbuff frags

Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.

[  193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[  193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G           O      5.15.123+ #26
[  193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[  194.021892] Call Trace:
[  194.027422]  <TASK>
[  194.072861]  tcp_gso_segment+0x107/0x540
[  194.082031]  inet_gso_segment+0x15c/0x3d0
[  194.090783]  skb_mac_gso_segment+0x9f/0x110
[  194.095016]  __skb_gso_segment+0xc1/0x190
[  194.103131]  netem_enqueue+0x290/0xb10 [sch_netem]
[  194.107071]  dev_qdisc_enqueue+0x16/0x70
[  194.110884]  __dev_queue_xmit+0x63b/0xb30
[  194.121670]  bond_start_xmit+0x159/0x380 [bonding]
[  194.128506]  dev_hard_start_xmit+0xc3/0x1e0
[  194.131787]  __dev_queue_xmit+0x8a0/0xb30
[  194.138225]  macvlan_start_xmit+0x4f/0x100 [macvlan]
[  194.141477]  dev_hard_start_xmit+0xc3/0x1e0
[  194.144622]  sch_direct_xmit+0xe3/0x280
[  194.147748]  __dev_queue_xmit+0x54a/0xb30
[  194.154131]  tap_get_user+0x2a8/0x9c0 [tap]
[  194.157358]  tap_sendmsg+0x52/0x8e0 [tap]
[  194.167049]  handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[  194.173631]  handle_tx+0xcd/0xe0 [vhost_net]
[  194.176959]  vhost_worker+0x76/0xb0 [vhost]
[  194.183667]  kthread+0x118/0x140
[  194.190358]  ret_from_fork+0x1f/0x30
[  194.193670]  </TASK>

In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.

Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-data-race-annotations'

Eric Dumazet says:

====================
net: another round of data-race annotations

Series inspired by some syzbot reports, taking care
of 4 socket fields that can be read locklessly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: annotate data-races around sk->sk_bind_phc

sk->sk_bind_phc is read locklessly. Add corresponding annotations.

Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: annotate data-races around sk->sk_tsflags

sk->sk_tsflags can be read locklessly, add corresponding annotations.

Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: annotate data-races around msk->rmem_fwd_alloc

msk->rmem_fwd_alloc can be read locklessly.

Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(),
and appropriate READ_ONCE()/WRITE_ONCE() annotations.

Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: annotate data-races around sk->sk_forward_alloc

Every time sk->sk_forward_alloc is read locklessly,
add a READ_ONCE().

Add sk_forward_alloc_add() helper to centralize updates,
to reduce number of WRITE_ONCE().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: use sk_forward_alloc_get() in sk_get_meminfo()

inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(),
but sk_get_meminfo() was forgotten.

Fixes: 292e6077b040 ("net: introduce sk_forward_alloc_get()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/handshake: fix null-ptr-deref in handshake_nl_done_doit()

We should not call trace_handshake_cmd_done_err() if socket lookup has failed.

Also we should call trace_handshake_cmd_done_err() before releasing the file,
otherwise dereferencing sock->sk can return garbage.

This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable")

Unable to handle kernel paging request at virtual address dfff800000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000003] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
lr : handshake_nl_done_doit+0x180/0x9c8
sp : ffff800096e37180
x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000
x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8
x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000
x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000
x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001
x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003
x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078
x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000
Call trace:
handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline]
genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x56c/0x840 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908)

Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-08-31

We've added 15 non-merge commits during the last 3 day(s) which contain
a total of 17 files changed, 468 insertions(+), 97 deletions(-).

The main changes are:

1) BPF selftest fixes: one flake and one related to clang18 testing,
   from Yonghong Song.

2) Fix a d_path BPF selftest failure after fast-forward from Linus'
   tree, from Jiri Olsa.

3) Fix a preempt_rt splat in sockmap when using raw_spin_lock_t,
   from John Fastabend.

4) Fix a xsk_diag_fill use-after-free race during socket cleanup,
   from Magnus Karlsson.

5) Fix xsk_build_skb to address a buggy dereference of an ERR_PTR(),
   from Tirthendu Sarkar.

6) Fix a bpftool build warning when compiled with -Wtype-limits,
   from Yafang Shao.

7) Several misc fixes and cleanups in standardization docs,
   from David Vernet.

8) Fix BPF selftest install to consider no_alu32/cpuv4/bpf-gcc flavors,
   from Björn Töpel.

9) Annotate a data race in bpf_long_memcpy for KCSAN, from Daniel Borkmann.

10) Extend documentation with a description for CO-RE relocations,
    from Eduard Zingerman.

11) Fix several invalid escape sequence warnings in bpf_doc.py script,
    from Vishal Chourasia.

12) Fix the instruction set doc wrt offset of BPF-to-BPF call,
    from Will Hawkins.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Include build flavors for install target
  bpf: Annotate bpf_long_memcpy with data_race
  selftests/bpf: Fix d_path test
  bpf, docs: Fix invalid escape sequence warnings in bpf_doc.py
  xsk: Fix xsk_diag use-after-free error during socket cleanup
  bpf, docs: s/eBPF/BPF in standards documents
  bpf, docs: Add abi.rst document to standardization subdirectory
  bpf, docs: Move linux-notes.rst to root bpf docs tree
  bpf, sockmap: Fix preempt_rt splat when using raw_spin_lock_t
  docs/bpf: Add description for CO-RE relocations
  bpf, docs: Correct source of offset for program-local call
  selftests/bpf: Fix flaky cgroup_iter_sleepable subtest
  xsk: Fix xsk_build_skb() error: 'skb' dereferencing possible ERR_PTR()
  bpftool: Fix build warnings with -Wtype-limits
  bpf: Prevent inlining of bpf_fentry_test7()
====================

Link: https://lore.kernel.org/r/20230831210019.14417-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/bpf: Include build flavors for install target

When using the "install" or targets depending on install, e.g. "gen_tar",
the BPF machine flavors weren't included.

A command like:
  | make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \
  |    HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \
  |    -C tools/testing/selftests gen_tar
would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc.

Include the BPF machine flavors for "install" make target.

Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831162954.111485-1-bjorn@kernel.org

bpf: Annotate bpf_long_memcpy with data_race

syzbot reported a data race splat between two processes trying to
update the same BPF map value via syscall on different CPUs:

  BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  value changed: 0x0000000000000000 -> 0xfffffff000002788

The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size
and forced to use long read/writes to try to atomically copy long counters.
It is best-effort only and no barriers are here since it _will_ race with
concurrent updates from BPF programs. The bpf_long_memcpy() is called from
bpf(2) syscall. Marco suggested that the best way to make this known to
KCSAN would be to use data_race() annotation.

Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com
Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net

selftests/bpf: Fix d_path test

Recent commit [1] broke d_path test, because now filp_close is not called
directly from sys_close, but eventually later when the file is finally
released.

As suggested by Hou Tao we don't need to re-hook the bpf program, but just
instead we can use sys_close_range to trigger filp_close synchronously.

[1] 021a160abf62 ("fs: use __fput_sync in close(2)")

Suggested-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831141103.359810-1-jolsa@kernel.org

bpf, docs: Fix invalid escape sequence warnings in bpf_doc.py

The script bpf_doc.py generates multiple SyntaxWarnings related to invalid
escape sequences when executed with Python 3.12. These warnings do not appear
in Python 3.10 and 3.11 and do not affect the kernel build, which completes
successfully.

This patch resolves these SyntaxWarnings by converting the relevant string
literals to raw strings or by escaping backslashes. This ensures that
backslashes are interpreted as literal characters, eliminating the warnings.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230829074931.2511204-1-vishalc@linux.ibm.com

xsk: Fix xsk_diag use-after-free error during socket cleanup

Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.

The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.

Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown")
Reported-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com

net: fib: avoid warn splat in flow dissector

New skbs allocated via nf_send_reset() have skb->dev == NULL.

fib*_rules_early_flow_dissect helpers already have a 'struct net'
argument but its not passed down to the flow dissector core, which
will then WARN as it can't derive a net namespace to use:

WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0
[..]
  ip_route_me_harder+0x143/0x330
  nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4]
  nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet]
  nft_do_chain+0x198/0x5d0 [nf_tables]
  nft_do_chain_inet+0xa4/0x110 [nf_tables]
  nf_hook_slow+0x41/0xc0
  ip_local_deliver+0xce/0x110
  ..

Cc: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Ido Schimmel <idosch@nvidia.com>
Fixes: 812fa71f0d96 ("netfilter: Dissect flow after packet mangling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830110043.30497-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: read sk->sk_family once in sk_mc_loop()

syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()

We have many more similar issues to fix.

WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695

Fixes: 7ad6848c7e81 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ipv4: annotate data-races around fi->fib_dead

syzbot complained about a data-race in fib_table_lookup() [1]

Add appropriate annotations to document it.

[1]
BUG: KCSAN: data-race in fib_release_info / fib_table_lookup

write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0:
fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281
fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777
fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106
fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317
fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448
notifier_call_chain kernel/notifier.c:93 [inline]
blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388
__inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432
inet_del_ifa net/ipv4/devinet.c:469 [inline]
inetdev_destroy net/ipv4/devinet.c:322 [inline]
inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1962 [inline]
call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037
dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673
do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837
rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1129
do_iter_write+0x4b4/0x7b0 fs/read_write.c:860
vfs_writev+0x1a8/0x320 fs/read_write.c:933
do_writev+0xf8/0x220 fs/read_write.c:976
__do_sys_writev fs/read_write.c:1049 [inline]
__se_sys_writev fs/read_write.c:1046 [inline]
__x64_sys_writev+0x45/0x50 fs/read_write.c:1046
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0

Fixes: dccd9ecc3744 ("ipv4: Do not use dead fib_info entries.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830095520.1046984-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sctp: annotate data-races around sk->sk_wmem_queued

sk->sk_wmem_queued can be read locklessly from sctp_poll()

Use sk_wmem_queued_add() when the field is changed,
and add READ_ONCE() annotations in sctp_writeable()
and sctp_assocs_seq_show()

syzbot reported:

BUG: KCSAN: data-race in sctp_poll / sctp_wfree

read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0:
sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147
skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988
skb_release_all net/core/skbuff.c:1000 [inline]
__kfree_skb+0x16/0x140 net/core/skbuff.c:1016
consume_skb+0x57/0x180 net/core/skbuff.c:1232
sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline]
sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530
sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128
sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515
sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051
sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80
sctp_rcv+0x116e/0x1340 net/sctp/input.c:243
sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
process_backlog+0x21f/0x380 net/core/dev.c:5894
__napi_poll+0x60/0x3b0 net/core/dev.c:6460
napi_poll net/core/dev.c:6527 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6660
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00019e80 -> 0x0000cc80

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: fq_pie: avoid stalls in fq_pie_timer()

When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.

Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.

Relevant extract from syzbot report:

rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236
Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b
RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206
RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0
RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<IRQ>
pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415
fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Link: https://lore.kernel.org/lkml/00000000000017ad3f06040bf394@google.com/
Reported-by: syzbot+e46fbd5289363464bc13@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230829123541.3745013-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-23-08-31' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix mangling of TCP options with non-linear skbuff, from Xiao Liang.

2) OOB read in xt_sctp due to missing sanitization of array length field.
   From Wander Lairson Costa.

3) OOB read in xt_u32 due to missing sanitization of array length field.
   Also from Wander Lairson Costa.

All of them above, always broken for several releases.

4) Missing audit log for set element reset command, from Phil Sutter.

5) Missing audit log for rule reset command, also from Phil.

These audit log support are missing in 6.5.

* tag 'nf-23-08-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Audit log rule reset
  netfilter: nf_tables: Audit log setelem reset
  netfilter: xt_u32: validate user space input
  netfilter: xt_sctp: validate the flag_info count
  netfilter: nft_exthdr: Fix non-linear header modification
====================

Link: https://lore.kernel.org/r/20230830235935.465690-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

doc/netlink: Fix missing classic_netlink doc reference

Add missing cross-reference label for classic_netlink.

Fixes: 2db8abf0b455 ("doc/netlink: Document the netlink-raw schema extensions")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230829085539.36354-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NFC: nxp: add NXP1002

It is backwards compatible

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230829084717.961-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: failure to probe without MAC interface specified

Alexander Stein reports that commit a014c35556b9 ("net: stmmac: clarify
difference between "interface" and "phy_interface"") caused breakage,
because plat->mac_interface will never be negative. Fix this by using
the "rc" temporary variable in stmmac_probe_config_dt().

Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/E1qayn0-006Q8J-GE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nf_tables: Audit log rule reset

Resetting rules' stateful data happens outside of the transaction logic,
so 'get' and 'dump' handlers have to emit audit log entries themselves.

Fixes: 8daa8fde3fc3f ("netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Audit log setelem reset

Since set element reset is not integrated into nf_tables' transaction
logic, an explicit log call is needed, similar to NFT_MSG_GETOBJ_RESET
handling.

For the sake of simplicity, catchall element reset will always generate
a dedicated log entry. This relieves nf_tables_dump_set() from having to
adjust the logged element count depending on whether a catchall element
was found or not.

Fixes: 079cd633219d7 ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: xt_u32: validate user space input

The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.

Add a checkentry function to validate the structure.

This was originally reported by the ZDI project (ZDI-CAN-18408).

Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match")
Cc: stable@vger.kernel.org
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>