review.tizen.org Git - platform/kernel/linux-rpi.git/log

mfd: max77620: Use single-byte writes on MAX77620

The MAX77620 doesn't support bulk writes, so make sure the regmap code
breaks bulk writes into multiple single-byte writes.

Note that this is mostly cosmetic because currently only the RTC sub-
driver uses bulk writes and the RTC driver ends up using a different
regmap on the MAX77620 anyway. However, it seems like a good idea to
make this change now in order to avoid running into issues if bulk
writes are ever used by other sub-drivers sometime down the road.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc

It's not necessary to free memory allocated with devm_kzalloc
and using kfree leads to a double free.

Fixes: 6ac7e4d7ad70 ("mfd: wcd934x: Add support to wcd9340/wcd9341 codec")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt

When STMFX supply is stopped, spurious interrupt can occur. To avoid that,
disable the interrupt in suspend before disabling the regulator and
re-enable it at the end of resume.

Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: stmfx: Fix stmfx_irq_init error path

In case the interrupt signal can't be configured, IRQ domain needs to be
removed.

Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: stmfx: Reset chip on resume as supply was disabled

STMFX supply is disabled during suspend. To avoid a too early access to
the STMFX firmware on resume, reset the chip and wait for its firmware to
be loaded.

Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: wm8994: Silence warning about supplies during deferred probe

Don't confuse user with meaningless warning about the failure in getting
supplies in case of deferred probe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()

When runtime PM is enabled, regulators are being controlled by the
driver's suspend and resume callbacks. They are also unconditionally
enabled at driver's probe(), and disabled in remove() functions. Add
more calls to runtime PM framework to ensure that the device's runtime
PM state matches the regulators state:
1. at the end of probe() function: set runtime PM state to active, so
there will be no spurious call to resume();
2. in remove(), ensure that resume() is called before disabling runtime PM
management and unconditionally disabling the regulators.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: wm8994: Fix driver operation if loaded as modules

WM8994 chip has built-in regulators, which might be used for chip
operation. They are controlled by a separate wm8994-regulator driver,
which should be loaded before this driver calls regulator_get(), because
that driver also provides consumer-supply mapping for the them. If that
driver is not yet loaded, regulator core substitute them with dummy
regulator, what breaks chip operation, because the built-in regulators are
never enabled. Fix this by annotating this driver with MODULE_SOFTDEP()
"pre" dependency to "wm8994_regulator" module.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

dt-bindings: mfd: mediatek: Add MT6397 Pin Controller

The MT6397 mfd includes a pin controller. Add binding
a description for it.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: Constify properties in mfd_cell

Constify 'struct property_entry *properties' in mfd_cell.
It is always passed around as a pointer const struct.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: sprd: Remove unnecessary spi_bus_type setting

The spi_register_driver() will set the spi_bus_type for the spi_driver,
thus remove the redundant setting in this driver.

Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake

It appears that preliminary documentation has a typo in the ID list,
i.e. LPSS UART #2 had been advertised wrongly.

Fix the driver according to the EDS v0.9.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION

Based on the file name and code of the driver, it is likely that this
module is related to TQMx86 and not TQx86.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: stpmic1: Make stpmic1_regmap_config static

Fix sparse warning:

drivers/mfd/stpmic1.c:62:28: warning:
symbol 'stpmic1_regmap_config' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: htc-i2cpld: Convert to use i2c_new_client_device()

Move away from the deprecated API and return the shiny new ERRPTR where
useful.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', 'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged

MAINTAINERS: Add entry for mp2629 Battery Charger driver

Add MAINTAINERS entry for Monolithic Power Systems mp2629 Charger driver.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

power: supply: mp2629: Add impedance compensation config

Allows the user to compensate the intrinsic resistance of the battery
to accelerate the charging cycle.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

power: supply: Add support for mps mp2629 battery charger

The mp2629 provides switching-mode battery charge management for
single-cell Li-ion or Li-polymer battery. Driver supports the
access/control input source and battery charging parameters.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

iio: adc: mp2629: Add support for mp2629 ADC driver

Add support for 8-bit resolution ADC readings for input power
supply and battery charging measurement. Provides voltage, current
readings to mp2629 power supply driver.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: mp2629: Add support for mps battery charger

mp2629 is a highly-integrated switching-mode battery charge management
device for single-cell Li-ion or Li-polymer battery.

Add MFD core enables chip access for ADC driver for battery readings,
and a power supply battery-charger driver

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

dt-bindings: mfd: Add document bindings for mp2629

Add device tree binding information for mp2629 mfd driver.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

rtc: mt6397: Add support for the MediaTek MT6358 RTC

This add support for the MediaTek MT6358 RTC. Driver using
compatible data to store different RTC_WRTGR address offset.
This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
driver which only needed by armv7 CPU without ATF.

Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: Add support for the MediaTek MT6358 PMIC

This adds support for the MediaTek MT6358 PMIC. This is a
multifunction device with the following sub modules:

- Regulator
- RTC
- Codec
- Interrupt

It is interfaced to the host controller using SPI interface
by a proprietary hardware called PMIC wrapper or pwrap.
MT6358 MFD is a child device of the pwrap.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC

This adds compatible for the MediaTek MT6358 PMIC.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: mt6397: Trim probe function to support different chips more cleanly

Add new struct members for mfd-cells and irq initial function, so we can
call devm_mfd_add_devices() only once.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: mt6397: Modify suspend/resume behavior

Some pmics don't need backup interrupt settings, so we change to use
pm notifier for the pmics which are necessary to store settings.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

hwmon: Add Gateworks System Controller support

The Gateworks System Controller has a hwmon sub-component that exposes
up to 16 ADC's, some of which are temperature sensors, others which are
voltage inputs. The ADC configuration (register mapping and name) is
configured via device-tree and varies board to board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: Add Gateworks System Controller core driver

The Gateworks System Controller (GSC) is an I2C slave controller
implemented with an MSP430 micro-controller whose firmware embeds the
following features:
- I/O expander (16 GPIO's) using PCA955x protocol
- Real Time Clock using DS1672 protocol
- User EEPROM using AT24 protocol
- HWMON using custom protocol
- Interrupt controller with tamper detect, user pushbotton
- Watchdog controller capable of full board power-cycle
- Power Control capable of full board power-cycle

see http://trac.gateworks.com/wiki/gsc for more details

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

dt-bindings: mfd: Add Gateworks System Controller bindings

This patch adds documentation of device-tree bindings for the
Gateworks System Controller (GSC).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

MAINTAINERS: Update entry for Intel Broxton PMC driver

The driver lives now under MFD so split the current entry into two parts
and add me as co-maintainer of the Intel Broxton PMC driver. While there
correct formatting of Zha Qipeng's email address.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_pmc_ipc: Convert to MFD

This driver only creates a bunch of platform devices sharing resources
belonging to the PMC device. This is pretty much what MFD subsystem is
for so move the driver there, renaming it to intel_pmc_bxt.c which
should be more clear what it is.

MFD subsystem provides nice helper APIs for subdevice creation so
convert the driver to use those. Unfortunately the ACPI device includes
separate resources for most of the subdevices so we cannot simply call
mfd_add_devices() to create all of them but instead we need to call it
separately for each device.

The new MFD driver continues to expose two sysfs attributes that allow
userspace to send IPC commands to the PMC/SCU to avoid breaking any
existing applications that may use these. Generally this is bad idea so
document this in the ABI documentation.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_telemetry: Add telemetry_get_pltdata()

Add new function that allows telemetry modules to get pointer to the
platform specific configuration. This is needed to allow the telemetry
debugfs module to fetch PMC IPC instance in the subsequent patch.

This also allows us to replace telemetry_pltconfig_valid() with
telemetry_get_pltdata() as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_pmc_ipc: Move PCI IDs to intel_scu_pcidrv.c

The PCI probe driver in intel_pmc_ipc.c is a duplicate of what we
already have in intel_scu_pcidrv.c with the exception that the later also
creates SCU specific devices. Move the PCI IDs from the intel_pmc_ipc.c
to intel_scu.c and use driver_data to detect whether SCU devices need to
be created or not.

Also update Kconfig entry to mention all platforms supported by the
Intel SCU PCI driver and change dependency from X86_INTEL_MID to PCI
which is more generic.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

x86/platform/intel-mid: Add empty stubs for intel_scu_devices_[create|destroy]()

This allows to call the functions even when CONFIG_X86_INTEL_MID is not
enabled.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_pmc_ipc: Drop intel_pmc_ipc_command()

Now that all callers have been converted over to the SCU IPC API we can
drop intel_pmc_ipc_command().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

usb: typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API

Convert the driver to use the new SCU IPC API. This allows us to get rid
of the duplicate PMC IPC implementation which is now covered in SCU IPC
driver.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_telemetry: Convert to use new SCU IPC API

Convert the Intel Apollo Lake telemetry driver to use the new SCU IPC
API. This allows us to get rid of the duplicate PMC IPC implementation
which is now covered in SCU IPC driver.

Also move telemetry specific IPC message constant to the telemetry
driver where it belongs.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: intel_soc_pmic_mrfld: Convert to use new SCU IPC API

This converts the Intel Merrifield PMIC driver over the new SCU IPC API
where the SCU IPC instance is passed to the functions.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: intel_soc_pmic_bxtwc: Convert to use new SCU IPC API

Convert the Intel Broxton Whiskey Cover PMIC driver to use the new SCU
IPC API. This allows us to get rid of the PMC IPC implementation which
is now covered in SCU IPC driver. We drop the error log if the IPC
command fails because intel_scu_ipc_dev_command() does that already.

Also move PMIC specific IPC message constants to the PMIC driver from
the intel_pmc_ipc.h header.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic

Both PMIC drivers (intel_soc_pmic_mrfld and intel_soc_pmic_bxtwc) will
be using this field going forward to access the SCU IPC instance.

While there add kernel-doc for the intel_soc_pmic structure.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_pmc_ipc: Start using SCU IPC

SCU IPC is pretty much the same IPC implemented in the intel_pmc_ipc
driver so drop the duplicate implementation and call directly the SCU
IPC.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_scu_ipc: Add managed function to register SCU IPC

Drivers such as intel_pmc_ipc.c can be unloaded as well so in order to
support those in this driver add a new function that can be called to
unregister the SCU IPC when it is not needed anymore.

We also add a managed version of the intel_scu_ipc_register() that takes
care of calling intel_scu_ipc_unregister() automatically when the driver
is unbound.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_scu_ipcutil: Convert to use new SCU IPC API

Convert the IPC util to use the new SCU IPC API where the SCU IPC
instance is passed to the functions.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

watchdog: intel-mid_wdt: Convert to use new SCU IPC API

This converts the Intel MID watchdog driver over the new SCU IPC API
where the SCU IPC instance is passed to the functions.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_mid_powerbtn: Convert to use new SCU IPC API

This converts the power button driver to use the new SCU IPC API where
the SCU IPC instance is passed to the functions.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_scu_ipc: Introduce new SCU IPC API

The current SCU IPC API has been operating on a single instance and
there has been no way to pin the providing module in place when the SCU
IPC is in use.

This implements a new API that takes the SCU IPC instance as first
parameter (NULL means the single instance is being used). The SCU IPC
instance can be retrieved by calling new function intel_scu_ipc_dev_get()
that take care of pinning the providing module in place as long as
intel_scu_ipc_dev_put() is not called.

The old API is updated to call the new API and is is left there in the
legacy API header to support the existing users that cannot be converted
easily.

Subsequent patches will convert most of the users over to the new API.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_scu_ipc: Move legacy SCU IPC API to a separate header

In preparation for introducing a new API for SCU IPC, move the legacy
API and constants to a separate header that is is subject to be removed
eventually.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_scu_ipc: Log more information if SCU IPC command fails

Currently we only log an error if the command times out which makes it
hard to figure out the failing command. This changes the driver to log
command and subcommand with the error code which should make debugging
easier. This also allows us to simplify the callers as they don't need
to log these errors themselves.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver

The SCU IPC functionality is usable outside of Intel MID devices. For
example modern Intel CPUs include the same thing but now it is called
PMC (Power Management Controller) instead of SCU. To make the IPC
available for those split the driver into core part (intel_scu_ipc.c)
and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
former before it goes and creates rest of the SCU devices. The SCU IPC
will also register a new class that gets assigned to the device that is
created under the parent PCI device.

We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
IPC library and INTEL_SCU_PCI the SCU driver and convert the users
accordingly. While there remove default y from the INTEL_SCU_PCI symbol
as it is already selected by X86_INTEL_MID.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

MAINTAINERS: sort field names for all entries

This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.

This was entirely scripted:

./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order

Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: sort entries by entry name

They are all supposed to be sorted, but people who add new entries don't
always know the alphabet.  Plus sometimes the entry names get edited,
and people don't then re-order the entry.

Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time.  Fingers crossed.

This was scripted with

  /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS

but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.

Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'x86-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A set of three patches to fix the fallout of the newly added split
  lock detection feature.

  It addressed the case where a KVM guest triggers a split lock #AC and
  KVM reinjects it into the guest which is not prepared to handle it.

  Add proper sanity checks which prevent the unconditional injection
  into the guest and handles the #AC on the host side in the same way as
  user space detections are handled. Depending on the detection mode it
  either warns and disables detection for the task or kills the task if
  the mode is set to fatal"

* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
  KVM: x86: Emulate split-lock access as a write in emulator
  x86/split_lock: Provide handle_guest_split_lock()

Merge tag 'timers-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull time(keeping) updates from Thomas Gleixner:

- Fix the time_for_children symlink in /proc/$PID/ so it properly
   reflects that it part of the 'time' namespace

- Add the missing userns limit for the allowed number of time
   namespaces, which was half defined but the actual array member was
   not added. This went unnoticed as the array has an exessive empty
   member at the end but introduced a user visible regression as the
   output was corrupted.

- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
   to catch half updated data.

* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ucount: Make sure ucounts in /proc/sys/user don't regress again
  time/namespace: Add max_time_namespaces ucount
  time/namespace: Fix time_for_children symlink

Merge tag 'sched-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes/updates from Thomas Gleixner:

- Deduplicate the average computations in the scheduler core and the
   fair class code.

- Fix a raise between runtime distribution and assignement which can
   cause exceeding the quota by up to 70%.

- Prevent negative results in the imbalanace calculation

- Remove a stale warning in the workqueue code which can be triggered
   since the call site was moved out of preempt disabled code. It's a
   false positive.

- Deduplicate the print macros for procfs

- Add the ucmap values to the SCHED_DEBUG procfs output for completness

* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Add task uclamp values to SCHED_DEBUG procfs
  sched/debug: Factor out printing formats into common macros
  sched/debug: Remove redundant macro define
  sched/core: Remove unused rq::last_load_update_tick
  workqueue: Remove the warning in wq_worker_sleeping()
  sched/fair: Fix negative imbalance in imbalance calculation
  sched/fair: Fix race between runtime distribution and assignment
  sched/fair: Align rq->avg_idle and rq->avg_scan_cost

Merge tag 'perf-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
"Three fixes/updates for perf:

   - Fix the perf event cgroup tracking which tries to track the cgroup
     even for disabled events.

   - Add Ice Lake server support for uncore events

   - Disable pagefaults when retrieving the physical address in the
     sampling code"

* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Disable page faults when getting phys address
  perf/x86/intel/uncore: Add Ice Lake server uncore support
  perf/cgroup: Correct indirection in perf_less_group_idx()
  perf/core: Fix event cgroup tracking

Merge tag 'locking-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
"Three small fixes/updates for the locking core code:

   - Plug a task struct reference leak in the percpu rswem
     implementation.

   - Document the refcount interaction with PID_MAX_LIMIT

   - Improve the 'invalid wait context' data dump in lockdep so it
     contains all information which is required to decode the problem"

* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Improve 'invalid wait context' splat
  locking/refcount: Document interaction with PID_MAX_LIMIT
  locking/percpu-rwsem: Fix a task_struct refcount

Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Ten cifs/smb fixes:

   - five RDMA (smbdirect) related fixes

   - add experimental support for swap over SMB3 mounts

   - also a fix which improves performance of signed connections"

* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: enable swap on SMB3 mounts
  smb3: change noisy error message to FYI
  smb3: smbdirect support can be configured by default
  cifs: smbd: Do not schedule work to send immediate packet on every receive
  cifs: smbd: Properly process errors on ib_post_send
  cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
  cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
  cifs: smbd: Check send queue size before posting a send
  cifs: smbd: Merge code to track pending packets
  cifs: ignore cached share root handle closing errors

Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfix from Trond Myklebust:
"Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"

* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS: Fix RCU lock leakage

Merge tag 'nios2-v5.7-rc1' of git://git./linux/kernel/git/lftan/nios2

Pull nios2 updates from Ley Foon Tan:

- Remove nios2-dev@lists.rocketboards.org from MAINTAINERS

- remove 'resetvalue' property

- rename 'altr,gpio-bank-width' -> 'altr,ngpio'

- enable the common clk subsystem on Nios2

* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
  arch: nios2: remove 'resetvalue' property
  arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
  arch: nios2: Enable the common clk subsystem on Nios2

Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

- fix an integer truncation in dma_direct_get_required_mask
   (Kishon Vijay Abraham)

- fix the display of dma mapping types (Grygorii Strashko)

* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: fix displaying of dma allocation type
  dma-direct: fix data truncation in dma_direct_get_required_mask()

Merge tag 'kbuild-v5.7-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

- raise minimum supported binutils version to 2.23

- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports

- move remaining CONFIG_AS_* tests to Kconfig from Makefile

- enable -Wtautological-compare warnings to catch more issues

- do not support GCC plugins for GCC <= 4.7

- fix various breakages of 'make xconfig'

- include the linker version used for linking the kernel into
   LINUX_COMPILER, which is used for the banner, and also exposed to
   /proc/version

- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
   allows us to remove the lib-ksyms.o workaround, and to solve the last
   known issue of the LLVM linker

- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
   in Kconfig, which will be useful for distro maintainers

- support the single switch, LLVM=1 to use Clang and all LLVM utilities
   instead of GCC and Binutils.

- support LLVM_IAS=1 to enable the integrated assembler, which is still
   experimental

* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
  kbuild: fix comment about missing include guard detection
  kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
  kbuild: replace AS=clang with LLVM_IAS=1
  kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
  kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
  MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
  kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
  kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
  Documentation/llvm: fix the name of llvm-size
  kbuild: mkcompile_h: Include $LD version in /proc/version
  kconfig: qconf: Fix a few alignment issues
  kconfig: qconf: remove some old bogus TODOs
  kconfig: qconf: fix support for the split view mode
  kconfig: qconf: fix the content of the main widget
  kconfig: qconf: Change title for the item window
  kconfig: qconf: clean deprecated warnings
  gcc-plugins: drop support for GCC <= 4.7
  kbuild: Enable -Wtautological-compare
  x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
  crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
  ...

mailmap: Add Sedat Dilek (replacement for expired email address)

I do not longer work for credativ Germany.

Please, use my private email address instead.

This is for the case when people want to CC me on
patches sent from my old business email address.

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pNFS: Fix RCU lock leakage

Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.

Fixes: a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest

Two types of #AC can be generated in Intel CPUs:
1. legacy alignment check #AC
2. split lock #AC

Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.

If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.

[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
helper function. ]

Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de

KVM: x86: Emulate split-lock access as a write in emulator

Emulate split-lock accesses as writes if split lock detection is on
to avoid #AC during emulation, which will result in a panic(). This
should never occur for a well-behaved guest, but a malicious guest can
manipulate the TLB to trigger emulation of a locked instruction[1].

More discussion can be found at [2][3].

[1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com
[2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com
[3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.com

Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de

x86/split_lock: Provide handle_guest_split_lock()

Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.

It will inject the #AC blindly into the guest whether the guest is
prepared or not.

Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.

[ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de

kbuild: fix comment about missing include guard detection

The keyword here is 'twice' to explain the trick.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:

- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
   gup, hugetlb, pagemap, memremap)

- Various other things (hfs, ocfs2, kmod, misc, seqfile)

* akpm: (34 commits)
  ipc/util.c: sysvipc_find_ipc() should increase position index
  kernel/gcov/fs.c: gcov_seq_next() should increase position index
  fs/seq_file.c: seq_read(): add info message about buggy .next functions
  drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
  change email address for Pali Rohár
  selftests: kmod: test disabling module autoloading
  selftests: kmod: fix handling test numbers above 9
  docs: admin-guide: document the kernel.modprobe sysctl
  fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
  kmod: make request_module() return an error when autoloading is disabled
  mm/memremap: set caching mode for PCI P2PDMA memory to WC
  mm/memory_hotplug: add pgprot_t to mhp_params
  powerpc/mm: thread pgprot_t through create_section_mapping()
  x86/mm: introduce __set_memory_prot()
  x86/mm: thread pgprot_t through init_memory_mapping()
  mm/memory_hotplug: rename mhp_restrictions to mhp_params
  mm/memory_hotplug: drop the flags field from struct mhp_restrictions
  mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
  mm/vma: introduce VM_ACCESS_FLAGS
  mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
  ...

Merge tag 'docs-5.7-2' of git://git.lwn.net/linux

Pull Documentation fixes from Jonathan Corbet:
"A handful of late-arriving fixes for the documentation tree"

* tag 'docs-5.7-2' of git://git.lwn.net/linux:
  Documentation: android: binderfs: add 'stats' mount option
  Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
  docs: driver-api: address duplicate label warning
  Documentation: sysrq: fix RST formatting
  docs: kernel-parameters.txt: Fix broken references
  docs: kernel-parameters.txt: Remove nompx
  docs: filesystems: fix typo in qnx6.rst

Merge tag 'for-linus-5.7-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.

  Fix:

   - Christoph Hellwig noticed that some logic I added to
     orangefs_file_read_iter introduced a race condition, so he sent a
     reversion patch. I had to modify his patch since reverting at this
     point broke Orangefs.

  Cleanups:

   - Christoph Hellwig noticed that we were doing some unnecessary work
     in orangefs_flush, so he sent in a patch that removed the un-needed
     code.

   - Al Viro told me he had trouble building Orangefs. Orangefs should
     be easy to build, even for Al :-).

     I looked back at the test server build notes in orangefs.txt, just
     in case that's where the trouble really is, and found a couple of
     typos and made a couple of clarifications"

* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: clarify build steps for test server in orangefs.txt
  orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
  orangefs: get rid of knob code...

Merge tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa

Pull xtensa updates from Max Filippov:

- replace setup_irq() by request_irq()

- cosmetic fixes in xtensa Kconfig and boot/Makefile

* tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa:
  arch/xtensa: fix grammar in Kconfig help text
  xtensa: remove meaningless export ccflags-y
  xtensa: replace setup_irq() by request_irq()

Merge tag 'for-linus-5.7-rc1b-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

- two cleanups

- fix a boot regression introduced in this merge window

- fix wrong use of memory allocation flags

* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: fix booting 32-bit pv guest
  x86/xen: make xen_pvmmu_arch_setup() static
  xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
  xen: Use evtchn_type_t as a type for event channels

ipc/util.c: sysvipc_find_ipc() should increase position index

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/gcov/fs.c: gcov_seq_next() should increase position index

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/seq_file.c: seq_read(): add info message about buggy .next functions

Patch series "seq_file .next functions should increase position index".

In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")

"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed.  A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps.  This will always show the whole
last line of /proc/swaps"

Described problem is still actual.  If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.

  $ dd if=/proc/swaps bs=1  # usual output
  Filename Type Size Used Priority
  /dev/dm-0                             partition 4194812 97536 -2
  104+0 records in
  104+0 records out
  104 bytes copied

  $ dd if=/proc/swaps bs=40 skip=1    # last line was generated twice
  dd: /proc/swaps: cannot skip to specified offset
  v/dm-0                                partition 4194812 97536 -2
  /dev/dm-0                             partition 4194812 97536 -2
  3+1 records in
  3+1 records out
  131 bytes copied

There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*

I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly

https://bugzilla.kernel.org/show_bug.cgi?id=206283

This patch (of 4):

Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.

[akpm@linux-foundation.org: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/244674e5-760c-86bd-d08a-047042881748@virtuozzo.com
Link: http://lkml.kernel.org/r/7c24087c-e280-e580-5b0c-0cdaeb14cd18@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings

Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.

Generated by: scripts/coccinelle/api/platform_get_irq.cocci

Fixes: 6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

change email address for Pali Rohár

For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.

People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.

[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: kmod: test disabling module autoloading

Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.

Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".

Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: kmod: fix handling test numbers above 9

get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: admin-guide: document the kernel.modprobe sysctl

Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.

[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()

After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().

The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.

Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().

Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.

Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmod: make request_module() return an error when autoloading is disabled

Patch series "module autoloading fixes and cleanups", v5.

This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.

It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().

This patch (of 4):

It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.

This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.

However, when module autoloading is disabled in this way,
request_module() returns 0. This is broken because callers expect 0 to
mean that the module was successfully loaded.

Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.

But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:

if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}

This is easily reproduced with:

echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /

It causes:

request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]

This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails. So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.

I've also sent patches to document and test this case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memremap: set caching mode for PCI P2PDMA memory to WC

PCI BAR IO memory should never be mapped as WB, however prior to this
the PAT bits were set WB and it was typically overridden by MTRR
registers set by the firmware.

Set PCI P2PDMA memory to be UC as this is what it currently, typically,
ends up being mapped as on x86 after the MTRR registers override the
cache setting.

Future use-cases may need to generalize this by adding flags to select
the caching type, as some P2PDMA cases may not want UC. However, those
use-cases are not upstream yet and this can be changed when they arrive.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-8-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: add pgprot_t to mhp_params

devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory.  At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-.  In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.

Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.

To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().

Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables.  For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).

For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.

A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm: thread pgprot_t through create_section_mapping()

In prepartion to support a pgprot_t argument for arch_add_memory().

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-6-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/mm: introduce __set_memory_prot()

For use in the 32bit arch_add_memory() to set the pgprot type of the
memory to add.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-5-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/mm: thread pgprot_t through init_memory_mapping()

In preparation to support a pgprot_t argument for arch_add_memory().

It's required to move the prototype of init_memory_mapping() seeing the
original location came before the definition of pgprot_t.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-4-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: rename mhp_restrictions to mhp_params

The mhp_restrictions struct really doesn't specify anything resembling a
restriction anymore so rename it to be mhp_params as it is a list of
extended parameters.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: drop the flags field from struct mhp_restrictions

Patch series "Allow setting caching mode in arch_add_memory() for
P2PDMA", v4.

Currently, the page tables created using memremap_pages() are always
created with the PAGE_KERNEL cacheing mode.  However, the P2PDMA code is
creating pages for PCI BAR memory which should never be accessed through
the cache and instead use either WC or UC.  This still works in most
cases, on x86, because the MTRR registers typically override the caching
settings in the page tables for all of the IO memory to be UC-.
However, this tends not to work so well on other arches or some rare x86
machines that have firmware which does not setup the MTRR registers in
this way.

Instead of this, this series proposes a change to arch_add_memory() to
take the pgprot required by the mapping which allows us to explicitly
set pagetable entries for P2PDMA memory to UC.

This changes is pretty routine for most of the arches: x86_64, arm64 and
powerpc simply need to thread the pgprot through to where the page
tables are setup.  x86_32 unfortunately sets up the page tables at boot
so must use _set_memory_prot() to change their caching mode.  ia64, s390
and sh don't appear to have an easy way to change the page tables so,
for now at least, we just return -EINVAL on such mappings and thus they
will not support P2PDMA memory until the work for this is done.  This
should be fine as they don't yet support ZONE_DEVICE.

This patch (of 7):

This variable is not used anywhere and should therefore be removed from
the structure.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-2-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/special: create generic fallbacks for pte_special() and pte_mkspecial()

Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.

mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.

[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vma: introduce VM_ACCESS_FLAGS

There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.

Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Springer <rspringer@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: add vm_insert_pages()

Add the ability to insert multiple pages at once to a user VM with lower
PTE spinlock operations.

The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.

[akpm@linux-foundation.org: pte_alloc() no longer takes the `addr' argument]
[arjunroy@google.com: add missing page_count() check to vm_insert_pages()]
Link: http://lkml.kernel.org/r/20200214005929.104481-1-arjunroy.kdev@gmail.com
[arjunroy@google.com: vm_insert_pages() checks if pte_index defined]
Link: http://lkml.kernel.org/r/20200228054714.204424-2-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-2-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: define pte_index as macro for x86

pte_index() is either defined as a macro (e.g.  sparc64) or as an
inlined function (e.g.  x86).  vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g.  m68k).

To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:

0. For platforms where it is meaningful, and defined as a macro, no
    change is needed.
1. For platforms where it is meaningful and defined as an inlined
    function, and we want to use it with vm_insert_pages(), we define
    a degenerate macro of the form:  #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
   definition. If found, it implements a batched insert. If not found,
   it devolves to calling vm_insert_page() in a loop.

This patch implements step 1 for x86.

v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bring sparc pte_index() semantics inline with other platforms

pte_index() on platforms other than sparc return a numerical index.  On
sparc, it returns a pte_t*.  This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.

This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
   other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
   (as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().

[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arjun Roy <arjunroy.kdev@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: refactor insert_page to prepare for batched-lock insert

Add helper methods for vm_insert_page()/insert_page() to prepare for
vm_insert_pages(), which batch-inserts pages to reduce spinlock
operations when inserting multiple consecutive pages into the user page
table.

The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>