media: mtk-cir: lower de-glitch counter for rc-mm protocol

[ Upstream commit 5dd4b89dc098bf22cd13e82a308f42a02c102b2b ]

The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch
filter removes pulses/spaces shorter than 294 microseconds.

Tested on a BananaPi R2.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dib0700: fix link error for dibx000_i2c_set_speed

[ Upstream commit 765bb8610d305ee488b35d07e2a04ae52fb2df9c ]

When CONFIG_DVB_DIB9000 is disabled, we can still compile code that
now fails to link against dibx000_i2c_set_speed:

drivers/media/usb/dvb-usb/dib0700_devices.o: In function `dib01x0_pmu_update.constprop.7':
dib0700_devices.c:(.text.unlikely+0x1c9c): undefined reference to `dibx000_i2c_set_speed'

The call sites are both through dib01x0_pmu_update(), which gets passed
an 'i2c' pointer from dib9000_get_i2c_master(), which has returned
NULL. Checking this pointer seems to be a good idea anyway, and it avoids
the link failure in most cases.

Sean Young found another case that is not fixed by that, where certain
gcc versions leave an unused function in place that causes the link error,
but adding an explict IS_ENABLED() check also solves this.

Fixes: b7f54910ce01 ("V4L/DVB (4647): Added module for DiB0700 based devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: leds-lp5562 allow firmware files up to the maximum length

[ Upstream commit ed2abfebb041473092b41527903f93390d38afa7 ]

Firmware files are in ASCII, using 2 hex characters per byte. The
maximum length of a firmware string is therefore

16 (commands) * 2 (bytes per command) * 2 (characters per byte) = 64

Fixes: ff45262a85db ("leds: add new LP5562 LED driver")
Signed-off-by: Nick Stoughton <nstoughton@logitech.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: bcm2835: Print error in case setting DMA mask fails

[ Upstream commit 72503b25ee363827aafffc3e8d872e6a92a7e422 ]

During enabling of the RPi 4, we found out that the driver doesn't provide
a helpful error message in case setting DMA mask fails. So add one.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/1563297318-4900-1-git-send-email-wahrenst@gmx.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom_scm: Use proper types for dma mappings

[ Upstream commit 6e37ccf78a53296c6c7bf426065762c27829eb84 ]

We need to use the proper types and convert between physical addresses
and dma addresses here to avoid mismatch warnings. This is especially
important on systems with a different size for dma addresses and
physical addresses. Otherwise, we get the following warning:

  drivers/firmware/qcom_scm.c: In function "qcom_scm_assign_mem":
  drivers/firmware/qcom_scm.c:469:47: error: passing argument 3 of "dma_alloc_coherent" from incompatible pointer type [-Werror=incompatible-pointer-types]

We also fix the size argument to dma_free_coherent() because that size
doesn't need to be aligned after it's already aligned on the allocation
size. In fact, dma debugging expects the same arguments to be passed to
both the allocation and freeing sides of the functions so changing the
size is incorrect regardless.

Reported-by: Ian Jackson <ian.jackson@citrix.com>
Cc: Ian Jackson <ian.jackson@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sgtl5000: Fix charge pump source assignment

[ Upstream commit b6319b061ba279577fd7030a9848fbd6a17151e3 ]

If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-7-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sgtl5000: Fix of unmute outputs on probe

[ Upstream commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca ]

To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-6-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tlv320aic31xx: suppress error message for EPROBE_DEFER

[ Upstream commit b7e814deae33eb30f8f8c6528e8e69b107978d88 ]

Both the supplies and reset GPIO might need a probe deferral for the
resource to be available. Don't print a error message in that case, as
it is a normal operating condition.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Andrew F. Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20190719143637.2018-1-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg

[ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ]

According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf
Table 20. VPOS Bias Register Field Descriptions VPOS[5:0]
Sets the Positive Display Bias (LDO) Voltage (50 mV per step)
000000: 4 V
000001: 4.05 V
000010: 4.1 V
....................
011101: 5.45 V
011110: 5.5 V (Default)
011111: 5.55 V
....................
100111: 5.95 V
101000: 6 V
Note: Codes 101001 to 111111 map to 6 V

The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage
can match the datasheet.

Fixes: 3a8d1a73a037 ("regulator: add LM363X driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Flush interrupts on disabling

[ Upstream commit caa8422d01e983782548648e125fd617cadcec3f ]

I was looking at

<4> [241.835158] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [241.835181] CPU: 1 PID: 214 Comm: kworker/1:3 Tainted: G     U            5.2.0-CI-CI_DRM_6509+ #1
<4> [241.835199] Hardware name: Dell Inc.                 OptiPlex 745                 /0GW726, BIOS 2.3.1  05/21/2007
<4> [241.835234] Workqueue: events snd_hdac_bus_process_unsol_events [snd_hda_core]
<4> [241.835256] RIP: 0010:input_handle_event+0x16d/0x5e0
<4> [241.835270] Code: 48 8b 93 58 01 00 00 8b 52 08 89 50 04 8b 83 f8 06 00 00 48 8b 93 00 07 00 00 8d 70 01 48 8d 04 c2 83 e1 08 89 b3 f8 06 00 00 <66> 89 28 66 44 89 60 02 44 89 68 04 8b 93 f8 06 00 00 0f 84 fd fe
<4> [241.835304] RSP: 0018:ffffc9000019fda0 EFLAGS: 00010046
<4> [241.835317] RAX: 6b6b6b6ec6c6c6c3 RBX: ffff8880290fefc8 RCX: 0000000000000000
<4> [241.835332] RDX: 000000006b6b6b6b RSI: 000000006b6b6b6c RDI: 0000000000000046
<4> [241.835347] RBP: 0000000000000005 R08: 0000000000000000 R09: 0000000000000001
<4> [241.835362] R10: ffffc9000019faa0 R11: 0000000000000000 R12: 0000000000000004
<4> [241.835377] R13: 0000000000000000 R14: ffff8880290ff1d0 R15: 0000000000000293
<4> [241.835392] FS:  0000000000000000(0000) GS:ffff88803de80000(0000) knlGS:0000000000000000
<4> [241.835409] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [241.835422] CR2: 00007ffe9a99e9b7 CR3: 000000002f588000 CR4: 00000000000006e0
<4> [241.835436] Call Trace:
<4> [241.835449]  input_event+0x45/0x70
<4> [241.835464]  snd_jack_report+0xdc/0x100
<4> [241.835490]  snd_hda_jack_report_sync+0x83/0xc0 [snd_hda_codec]
<4> [241.835512]  snd_hdac_bus_process_unsol_events+0x5a/0x70 [snd_hda_core]
<4> [241.835530]  process_one_work+0x245/0x610

which has the hallmarks of a worker queued from interrupt after it was
supposedly cancelled (note the POISON_FREE), and I could not see where
the interrupt would be flushed on shutdown so added the likely suspects.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111174
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs

[ Upstream commit 8572cea1461a006bce1d06c0c4b0575869125fa4 ]

In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of
intermediate allocations or initializations fail memory is leaked.
requiered releases are added.

Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: enforce CAP_NET_RAW for raw sockets

[ Upstream commit 3a359798b176183ef09efb7a3dc59abad1cc7104 ]

When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked
first.

Signed-off-by: Ori Nimron <orinimron123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee802154: enforce CAP_NET_RAW for raw sockets

[ Upstream commit e69dbd4619e7674c1679cba49afd9dd9ac347eef ]

When creating a raw AF_IEEE802154 socket, CAP_NET_RAW needs to be
checked first.

Signed-off-by: Ori Nimron <orinimron123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ax25: enforce CAP_NET_RAW for raw sockets

[ Upstream commit 0614e2b73768b502fc32a75349823356d98aae2c ]

When creating a raw AF_AX25 socket, CAP_NET_RAW needs to be checked
first.

Signed-off-by: Ori Nimron <orinimron123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

appletalk: enforce CAP_NET_RAW for raw sockets

[ Upstream commit 6cc03e8aa36c51f3b26a0d21a3c4ce2809c842ac ]

When creating a raw AF_APPLETALK socket, CAP_NET_RAW needs to be checked
first.

Signed-off-by: Ori Nimron <orinimron123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mISDN: enforce CAP_NET_RAW for raw sockets

[ Upstream commit b91ee4aa2a2199ba4d4650706c272985a5a32d80 ]

When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked
first.

Signed-off-by: Ori Nimron <orinimron123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Add device ID of upcoming BlueField-2

[ Upstream commit d19a79ee38c8fda6d297e4227e80db8bf51c71a6 ]

Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx
network controller. Its VFs will be using the generic VF device ID:
0x101e "ConnectX Family mlx5Gen Virtual Function".

Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state

[ Upstream commit a66b10c05ee2d744189e9a2130394b070883d289 ]

Yuchung Cheng and Marek Majkowski independently reported a weird
behavior of TCP_USER_TIMEOUT option when used at connect() time.

When the TCP_USER_TIMEOUT is reached, tcp_write_timeout()
believes the flow should live, and the following condition
in tcp_clamp_rto_to_user_timeout() programs one jiffie timers :

    remaining = icsk->icsk_user_timeout - elapsed;
    if (remaining <= 0)
        return 1; /* user timeout has passed; fire ASAP */

This silly situation ends when the max syn rtx count is reached.

This patch makes sure we honor both TCP_SYNCNT and TCP_USER_TIMEOUT,
avoiding these spurious SYN packets.

Fixes: b701a99e431d ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Cc: Jon Maxwell <jmaxwell37@gmail.com>
Link: https://marc.info/?l=linux-netdev&m=156940118307949&w=2
Acked-by: Jon Maxwell <jmaxwell37@gmail.com>
Tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: fix possible crash in tcf_action_destroy()

[ Upstream commit 3d66b89c30f9220a72e92847768fc8ba4d027d88 ]

If the allocation done in tcf_exts_init() failed,
we end up with a NULL pointer in exts->actions.

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8198 Comm: syz-executor.3 Not tainted 5.3.0-rc8+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcf_action_destroy+0x71/0x160 net/sched/act_api.c:705
Code: c3 08 44 89 ee e8 4f cb bb fb 41 83 fd 20 0f 84 c9 00 00 00 e8 c0 c9 bb fb 48 89 d8 48 b9 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 08 00 0f 85 c0 00 00 00 4c 8b 33 4d 85 f6 0f 84 9d 00 00 00
RSP: 0018:ffff888096e16ff0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000040000 RSI: ffffffff85b6ab30 RDI: 0000000000000000
RBP: ffff888096e17020 R08: ffff8880993f6140 R09: fffffbfff11cae67
R10: fffffbfff11cae66 R11: ffffffff88e57333 R12: 0000000000000000
R13: 0000000000000000 R14: ffff888096e177a0 R15: 0000000000000001
FS:  00007f62bc84a700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000758040 CR3: 0000000088b64000 CR4: 00000000001426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tcf_exts_destroy+0x38/0xb0 net/sched/cls_api.c:3030
 tcindex_set_parms+0xf7f/0x1e50 net/sched/cls_tcindex.c:488
 tcindex_change+0x230/0x318 net/sched/cls_tcindex.c:519
 tc_new_tfilter+0xa4b/0x1c70 net/sched/cls_api.c:2152
 rtnetlink_rcv_msg+0x838/0xb00 net/core/rtnetlink.c:5214
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]

Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: sanity checking of packet sizes and device mtu

[ Upstream commit 280ceaed79f18db930c0cc8bb21f6493490bf29c ]

After a reset packet sizes and device mtu can change and need
to be reevaluated to calculate queue sizes.
Malicious devices can set this to zero and we divide by it.
Introduce sanity checking.

Reported-and-tested-by: syzbot+6102c120be558c885f04@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: ignore endpoints with invalid wMaxPacketSize

[ Upstream commit 8d3d7c2029c1b360f1a6b0a2fca470b57eb575c0 ]

Endpoints with zero wMaxPacketSize are not usable for transferring
data. Ignore such endpoints when looking for valid in, out and
status pipes, to make the drivers more robust against invalid and
meaningless descriptors.

The wMaxPacketSize of these endpoints are used for memory allocations
and as divisors in many usbnet minidrivers. Avoiding zero is therefore
critical.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skge: fix checksum byte order

[ Upstream commit 5aafeb74b5bb65b34cc87c7623f9fa163a34fa3b ]

Running old skge driver on PowerPC causes checksum errors
because hardware reported 1's complement checksum is in little-endian
byte order.

Reported-by: Benoit <benoit.sansoni@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_netem: fix a divide by zero in tabledist()

[ Upstream commit b41d936b5ecfdb3a4abc525ce6402a6c49cffddc ]

syzbot managed to crash the kernel in tabledist() loading
an empty distribution table.

t = dist->table[rnd % dist->size];

Simply return an error when such load is attempted.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: Fix memory leak in ppp_write

[ Upstream commit 4c247de564f1ff614d11b3bb5313fb70d7b9598b ]

When ppp is closing, __ppp_xmit_process() failed to enqueue skb
and skb allocated in ppp_write() is leaked.

syzbot reported :
BUG: memory leak
unreferenced object 0xffff88812a17bc00 (size 224):
  comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline]
    [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline]
    [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574
    [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197
    [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline]
    [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502
    [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494
    [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline]
    [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542
    [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611
    [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline]
    [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline]
    [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620
    [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by freeing skb, if ppp is closing.

Fixes: 6d066734e9f0 ("ppp: avoid loop in xmit recursion detection code")
Reported-and-tested-by: syzbot+d9c8bf24e56416d7ce2c@syzkaller.appspotmail.com
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Tested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: change type of UPCALL_PID attribute to NLA_UNSPEC

[ Upstream commit ea8564c865299815095bebeb4b25bef474218e4c ]

userspace openvswitch patch "(dpif-linux: Implement the API
functions to allow multiple handler threads read upcall)"
changes its type from U32 to UNSPEC, but leave the kernel
unchanged

and after kernel 6e237d099fac "(netlink: Relax attr validation
for fixed length types)", this bug is exposed by the below
warning

[   57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length.

Fixes: 5cd667b0a456 ("openvswitch: Allow each vport to have an array of 'port_id's")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs

[ Upstream commit 8ce39eb5a67aee25d9f05b40b673c95b23502e3e ]

In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.

Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: add max len check for TCA_KIND

[ Upstream commit 62794fc4fbf52f2209dc094ea255eaef760e7d01 ]

The TCA_KIND attribute is of NLA_STRING which does not check
the NUL char. KMSAN reported an uninit-value of TCA_KIND which
is likely caused by the lack of NUL.

Change it to NLA_NUL_STRING and add a max len too.

Fixes: 8b4c3cdd9dd8 ("net: sched: Add policy validation for tc attributes")
Reported-and-tested-by: syzbot+618aacd49e8c8b8486bd@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: act_sample: don't push mac header on ip6gre ingress

[ Upstream commit 92974a1d006ad8b30d53047c70974c9e065eb7df ]

current 'sample' action doesn't push the mac header of ingress packets if
they are received by a layer 3 tunnel (like gre or sit); but it forgot to
check for gre over ipv6, so the following script:

 # tc q a dev $d clsact
 # tc f a dev $d ingress protocol ip flower ip_proto icmp action sample \
 > group 100 rate 1
 # psample -v -g 100

dumps everything, including outer header and mac, when $d is a gre tunnel
over ipv6. Fix this adding a missing label for ARPHRD_IP6GRE devices.

Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qrtr: Stop rx_worker before freeing node

[ Upstream commit 73f0c11d11329a0d6d205d4312b6e5d2512af7c5 ]

As the endpoint is unregistered there might still be work pending to
handle incoming messages, which will result in a use after free
scenario. The plan is to remove the rx_worker, but until then (and for
stable@) ensure that the work is stopped before the node is freed.

Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Cc: stable@vger.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/phy: fix DP83865 10 Mbps HDX loopback disable function

[ Upstream commit e47488b2df7f9cb405789c7f5d4c27909fc597ae ]

According to the DP83865 datasheet "the 10 Mbps HDX loopback can be
disabled in the expanded memory register 0x1C0.1". The driver erroneously
used bit 0 instead of bit 1.

Fixes: 4621bf129856 ("phy: Add file missed in previous commit.")
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: drop skb sk before calling gro_cells_receive

[ Upstream commit ba56d8ce38c8252fff5b745db3899cf092578ede ]

Fei Liu reported a crash when doing netperf on a topo of macsec
dev over veth:

  [  448.919128] refcount_t: underflow; use-after-free.
  [  449.090460] Call trace:
  [  449.092895]  refcount_sub_and_test+0xb4/0xc0
  [  449.097155]  tcp_wfree+0x2c/0x150
  [  449.100460]  ip_rcv+0x1d4/0x3a8
  [  449.103591]  __netif_receive_skb_core+0x554/0xae0
  [  449.108282]  __netif_receive_skb+0x28/0x78
  [  449.112366]  netif_receive_skb_internal+0x54/0x100
  [  449.117144]  napi_gro_complete+0x70/0xc0
  [  449.121054]  napi_gro_flush+0x6c/0x90
  [  449.124703]  napi_complete_done+0x50/0x130
  [  449.128788]  gro_cell_poll+0x8c/0xa8
  [  449.132351]  net_rx_action+0x16c/0x3f8
  [  449.136088]  __do_softirq+0x128/0x320

The issue was caused by skb's true_size changed without its sk's
sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the
skb is being freed and the skb's truesize is subtracted from its
sk's sk_wmem_alloc in tcp_wfree(), underflow occurs.

macsec is calling gro_cells_receive() to receive a packet, which
actually requires skb->sk to be NULL. However when macsec dev is
over veth, it's possible the skb->sk is still set if the skb was
not unshared or expanded from the peer veth.

ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy,
but it is too late for macsec's calling gro_cells_receive(). So
fix it by dropping the skb's sk earlier on rx path of macsec.

Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices")
Reported-by: Xiumei Mu <xmu@redhat.com>
Reported-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize

[ Upstream commit 3fe4b3351301660653a2bc73f2226da0ebd2b95e ]

Endpoints with zero wMaxPacketSize are not usable for transferring
data. Ignore such endpoints when looking for valid in, out and
status pipes, to make the driver more robust against invalid and
meaningless descriptors.

The wMaxPacketSize of the out pipe is used as divisor. So this change
fixes a divide-by-zero bug.

Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arcnet: provide a buffer big enough to actually receive packets

[ Upstream commit 108639aac35eb57f1d0e8333f5fc8c7ff68df938 ]

struct archdr is only big enough to hold the header of various types of
arcnet packets. So to provide enough space to hold the data read from
hardware provide a buffer large enough to hold a packet with maximal
size.

The problem was noticed by the stack protector which makes the kernel
oops.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.76

f2fs: use generic EFSBADCRC/EFSCORRUPTED

[ Upstream commit 10f966bbf521bb9b2e497bbca496a5141f4071d0 ]

f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.

This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.

EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rds: Check laddr_check before calling it

[ Upstream commit 05733434ee9ae6548723a808647248583e347cca ]

In rds_bind(), laddr_check is called without checking if it is NULL or
not.  And rs_transport should be reset if rds_add_bound() fails.

Fixes: c5c1a030a7db ("net/rds: An rds_sock is added too early to the hash table")
Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rds: An rds_sock is added too early to the hash table

[ Upstream commit c5c1a030a7dbf8dd4e1fa4405ae9a89dc1d2a8db ]

In rds_bind(), an rds_sock is added to the RDS bind hash table before
rs_transport is set.  This means that the socket can be found by the
receive code path when rs_transport is NULL.  And the receive code
path de-references rs_transport for congestion update check.  This can
cause a panic.  An rds_sock should not be added to the bind hash table
before all the needed fields are set.

Reported-by: syzbot+4b4f8163c2e246df3c4c@syzkaller.appspotmail.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net_sched: check cops->tcf_block in tc_bind_tclass()

[ Upstream commit 8b142a00edcf8422ca48b8de88d286efb500cb53 ]

At least sch_red and sch_tbf don't implement ->tcf_block()
while still have a non-zero tc "class".

Instead of adding nop implementations to each of such qdisc's,
we can just relax the check of cops->tcf_block() in
tc_bind_tclass(). They don't support TC filter anyway.

Reported-by: syzbot+21b29db13c065852f64b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices

[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ]

The ASUS X412FA laptop contains a Realtek RTL8822CE device with an
associated BT chip using a USB ID of 04ca:4005. This ID is added to the
driver.

The /sys/kernel/debug/usb/devices portion for this device is:

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=4005 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_socket: fix erroneous socket assignment

[ Upstream commit 039b1f4f24ecc8493b6bb9d70b4b78750d1b35c2 ]

The socket assignment is wrong, see skb_orphan():
When skb->destructor callback is not set, but skb->sk is set, this hits BUG().

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1651813
Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: don't crash on null attr fork xfs_bmapi_read

[ Upstream commit 8612de3f7ba6e900465e340516b8313806d27b2d ]

Zorro Lang reported a crash in generic/475 if we try to inactivate a
corrupt inode with a NULL attr fork (stack trace shortened somewhat):

RIP: 0010:xfs_bmapi_read+0x311/0xb00 [xfs]
RSP: 0018:ffff888047f9ed68 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888047f9f038 RCX: 1ffffffff5f99f51
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000012
RBP: ffff888002a41f00 R08: ffffed10005483f0 R09: ffffed10005483ef
R10: ffffed10005483ef R11: ffff888002a41f7f R12: 0000000000000004
R13: ffffe8fff53b5768 R14: 0000000000000005 R15: 0000000000000001
FS:  00007f11d44b5b80(0000) GS:ffff888114200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000ef6000 CR3: 000000002e176003 CR4: 00000000001606e0
Call Trace:
 xfs_dabuf_map.constprop.18+0x696/0xe50 [xfs]
 xfs_da_read_buf+0xf5/0x2c0 [xfs]
 xfs_da3_node_read+0x1d/0x230 [xfs]
 xfs_attr_inactive+0x3cc/0x5e0 [xfs]
 xfs_inactive+0x4c8/0x5b0 [xfs]
 xfs_fs_destroy_inode+0x31b/0x8e0 [xfs]
 destroy_inode+0xbc/0x190
 xfs_bulkstat_one_int+0xa8c/0x1200 [xfs]
 xfs_bulkstat_one+0x16/0x20 [xfs]
 xfs_bulkstat+0x6fa/0xf20 [xfs]
 xfs_ioc_bulkstat+0x182/0x2b0 [xfs]
 xfs_file_ioctl+0xee0/0x12a0 [xfs]
 do_vfs_ioctl+0x193/0x1000
 ksys_ioctl+0x60/0x90
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x9f/0x4d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f11d39a3e5b

The "obvious" cause is that the attr ifork is null despite the inode
claiming an attr fork having at least one extent, but it's not so
obvious why we ended up with an inode in that state.

Reported-by: Zorro Lang <zlang@redhat.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204031
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling

[ Upstream commit 533f4752407543f488a9118d817b8c504352b6fb ]

Previously center scaling would get scaling applied to it (when it was
only supposed to center the image), and aspect-corrected scaling did not
always correctly pick whether to reduce width or height for a particular
combination of inputs/outputs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35

[ Upstream commit 4f7f96453b462b3de0fa18d18fe983960bb5ee7f ]

Some machines change the brightness themselves when a brightness hotkey
gets pressed, despite us telling them not to. This causes the brightness to
go two steps up / down when the hotkey is pressed. This is esp. a problem
on older machines with only a few brightness levels.

This commit adds a new hw_changes_brightness quirk which makes
acpi_video_device_notify() only call backlight_force_update(...,
BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace
that the brightness was changed and leaving it at that fixing the dual
step problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077
Reported-by: Kacper Piwiński <cosiekvfj@o2.pl>
Tested-by: Kacper Piwiński <cosiekvfj@o2.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btrtl: HCI reset on close for Realtek BT chip

[ Upstream commit 7af3f558aca74f2ee47b173f1c27f6bb9a5b5561 ]

Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly
after on-off several times. Bluetooth daemon sets BT mode failed when
this issue happens. Scanning must be active while turning off for this
bug to be hit.

bluetoothd[1576]: Failed to set mode: Failed (0x03)

If BT is turned off, then turned on again, it works correctly again.

According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set
during probing. So, this patch makes Realtek's BT reset on close to fix
this issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: don't warn in inet diag when IPV6 is disabled

[ Upstream commit 1e64d7cbfdce4887008314d5b367209582223f27 ]

If IPV6 was disabled, then ss command would cause a kernel warning
because the command was attempting to dump IPV6 socket information.
The fix is to just remove the warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202249
Fixes: 432490f9d455 ("net: ip, diag -- Add diag interface for raw sockets")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Flush output polling on shutdown

[ Upstream commit 3b295cb1a411d9c82bbfaa66bc17a8508716ed07 ]

We need to mark the output polling as disabled to prevent concurrent
irqs from queuing new work as shutdown the probe -- causing that work to
execute after we have freed the structs:

<4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
<4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915]
<4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G     U            5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50
<4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48
<4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286
<4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000
<4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c
<4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600
<4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0
<4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0
<4> [341.846613] FS:  00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000
<4> [341.846620] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0
<4> [341.846632] Call Trace:
<4> [341.846639]  drm_fb_helper_fini.part.17+0xb3/0x100
<4> [341.846682]  intel_fbdev_fini+0x20/0x80 [i915]
<4> [341.846722]  intel_modeset_cleanup+0x9a/0x140 [i915]
<4> [341.846750]  i915_driver_unload+0xa3/0x100 [i915]
<4> [341.846778]  i915_pci_remove+0x19/0x30 [i915]
<4> [341.846784]  pci_device_remove+0x36/0xb0
<4> [341.846790]  device_release_driver_internal+0xd3/0x1b0
<4> [341.846795]  driver_detach+0x3f/0x80
<4> [341.846800]  bus_remove_driver+0x53/0xd0
<4> [341.846805]  pci_unregister_driver+0x25/0xa0
<4> [341.846843]  i915_exit+0x16/0x1c [i915]
<4> [341.846849]  __se_sys_delete_module+0x162/0x210
<4> [341.846855]  ? trace_hardirqs_off_thunk+0x1a/0x1c
<4> [341.846859]  ? do_syscall_64+0xd/0x1c0
<4> [341.846864]  do_syscall_64+0x55/0x1c0
<4> [341.846869]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [341.846875] RIP: 0033:0x7f62b51871b7
<4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
<4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
<4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7
<4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948
<4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160
<4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000
<4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000
<4> [341.846936] irq event stamp: 3547847
<4> [341.846940] hardirqs last  enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60
<4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50
<4> [341.846957] softirqs last  enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
<4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0
<4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846980] ---[ end trace ba94ca8952ba970e ]---
<7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
<7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
<7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G     U  W         5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.890655] Workqueue: events output_poll_execute
<4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0
<4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8
<4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202
<4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000
<4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff
<4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
<4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8
<4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007
<4> [341.890730] FS:  0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000
<4> [341.890739] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0
<4> [341.890752] Call Trace:
<4> [341.890760]  drm_fb_helper_hotplug_event.part.24+0x89/0xb0
<4> [341.890768]  drm_kms_helper_hotplug_event+0x21/0x30
<4> [341.890774]  output_poll_execute+0x9d/0x1a0
<4> [341.890782]  process_one_work+0x245/0x610
<4> [341.890790]  worker_thread+0x37/0x380
<4> [341.890796]  ? process_one_work+0x610/0x610
<4> [341.890802]  kthread+0x119/0x130
<4> [341.890808]  ? kthread_park+0x80/0x80
<4> [341.890815]  ret_from_fork+0x3a/0x50

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603135910.15979-2-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to do sanity check on segment bitmap of LFS curseg

[ Upstream commit c854f4d681365498f53ba07843a16423625aa7e9 ]

As Jungyeon Reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203233

- Reproduces
gcc poc_13.c
./run.sh f2fs

- Kernel messages
 F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
 kernel BUG at fs/f2fs/segment.c:2133!
 RIP: 0010:update_sit_entry+0x35d/0x3e0
 Call Trace:
  f2fs_allocate_data_block+0x16c/0x5a0
  do_write_page+0x57/0x100
  f2fs_do_write_node_page+0x33/0xa0
  __write_node_page+0x270/0x4e0
  f2fs_sync_node_pages+0x5df/0x670
  f2fs_write_checkpoint+0x364/0x13a0
  f2fs_sync_fs+0xa3/0x130
  f2fs_do_sync_file+0x1a6/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0x110
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The testcase fails because that, in fuzzed image, current segment was
allocated with LFS type, its .next_blkoff should point to an unused
block address, but actually, its bitmap shows it's not. So during
allocation, f2fs crash when setting bitmap.

Introducing sanity_check_curseg() to check such inconsistence of
current in-used segment.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ibmvnic: Fix missing { in __ibmvnic_reset

[ Upstream commit c8dc55956b09b53ccffceb6e3146981210e27821 ]

Commit 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue")
adds a } without corresponding { causing build break.

Fixes: 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm zoned: fix invalid memory access

[ Upstream commit 0c8e9c2d668278652af028c3cc068c65f66342f4 ]

Commit 75d66ffb48efb30f2dd42f041ba8b39c5b2bd115 ("dm zoned: properly
handle backing device failure") triggers a coverity warning:

*** CID 1452808:  Memory - illegal accesses  (USE_AFTER_FREE)
/drivers/md/dm-zoned-target.c: 137 in dmz_submit_bio()
131             clone->bi_private = bioctx;
132
133             bio_advance(bio, clone->bi_iter.bi_size);
134
135             refcount_inc(&bioctx->ref);
136             generic_make_request(clone);
>>>     CID 1452808:  Memory - illegal accesses  (USE_AFTER_FREE)
>>>     Dereferencing freed pointer "clone".
137             if (clone->bi_status == BLK_STS_IOERR)
138                     return -EIO;
139
140             if (bio_op(bio) == REQ_OP_WRITE && dmz_is_seq(zone))
141                     zone->wp_block += nr_blocks;
142

The "clone" bio may be processed and freed before the check
"clone->bi_status == BLK_STS_IOERR" - so this check can access invalid
memory.

Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "f2fs: avoid out-of-range memory access"

[ Upstream commit a37d0862d17411edb67677a580a6f505ec2225f6 ]

As Pavel Machek reported:

"We normally use -EUCLEAN to signal filesystem corruption. Plus, it is
good idea to report it to the syslog and mark filesystem as "needing
fsck" if filesystem can do that."

Still we need improve the original patch with:
- use unlikely keyword
- add message print
- return EUCLEAN

However, after rethink this patch, I don't think we should add such
condition check here as below reasons:
- We have already checked the field in f2fs_sanity_check_ckpt(),
- If there is fs corrupt or security vulnerability, there is nothing
to guarantee the field is integrated after the check, unless we do
the check before each of its use, however no filesystem does that.
- We only have similar check for bitmap, which was added due to there
is bitmap corruption happened on f2fs' runtime in product.
- There are so many key fields in SB/CP/NAT did have such check
after f2fs_sanity_check_{sb,cp,..}.

So I propose to revert this unneeded check.

This reverts commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: move cancel of requeue_work to the front of blk_exit_queue

[ Upstream commit e26cc08265dda37d2acc8394604f220ef412299d ]

blk_exit_queue will free elevator_data, while blk_mq_requeue_work
will access it. Move cancel of requeue_work to the front of
blk_exit_queue to avoid use-after-free.

blk_exit_queue                blk_mq_requeue_work
  __elevator_exit               blk_mq_run_hw_queues
    blk_mq_exit_sched             blk_mq_run_hw_queue
      dd_exit_queue                 blk_mq_hctx_has_pending
        kfree(elevator_data)          blk_mq_sched_has_work
                                        dd_has_work

Fixes: fbc2a15e3433 ("blk-mq: move cancel of requeue_work into blk_mq_release")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: change gfp flags to GFP_NOIO in blk_mq_realloc_hw_ctxs

[ Upstream commit 5b202853ffbc54b29f23c4b1b5f3948efab489a2 ]

blk_mq_realloc_hw_ctxs could be invoked during update hw queues.
At the momemt, IO is blocked. Change the gfp flags from GFP_KERNEL
to GFP_NOIO to avoid forever hang during memory allocation in
blk_mq_realloc_hw_ctxs.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

initramfs: don't free a non-existent initrd

[ Upstream commit 5d59aa8f9ce972b472201aed86e904bb75879ff0 ]

Since commit 54c7a8916a88 ("initramfs: free initrd memory if opening
/initrd.image fails"), the kernel has unconditionally attempted to free
the initrd even if it doesn't exist.

In the non-existent case this causes a boot-time splat if
CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a
NULL address.

Instead we should check that the initrd actually exists and only attempt
to free it if it does.

Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com
Fixes: 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails")
Signed-off-by: Steven Price <steven.price@arm.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: remove redundant LIST_HEAD(journal) from run_cache_set()

[ Upstream commit cdca22bcbc64fc83dadb8d927df400a8d86ddabb ]

Commit 95f18c9d1310 ("bcache: avoid potential memleak of list of
journal_replay(s) in the CACHE_SYNC branch of run_cache_set") forgets
to remove the original define of LIST_HEAD(journal), which makes
the change no take effect. This patch removes redundant variable
LIST_HEAD(journal) from run_cache_set(), to make Shenghui's fix
working.

Fixes: 95f18c9d1310 ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set")
Reported-by: Juha Aatrokoski <juha.aatrokoski@aalto.fi>
Cc: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it

[ Upstream commit 533ca1feed98b0bf024779a14760694c7cb4d431 ]

The slot must be removed before the pci_dev is removed, otherwise a panic
can happen due to use-after-free.

Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: check all the data segments against all node ones

[ Upstream commit 1166c1f2f69117ad254189ca781287afa6e550b6 ]

As a part of the sanity checking while mounting, distinct segment number
assignment to data and node segments is verified. Fixing a small bug in
this verification between node and data segments. We need to check all
the data segments with all the node segments.

Fixes: 042be0f849e5f ("f2fs: fix to do sanity check with current segment number")
Signed-off-by: Surbhi Palande <csurbhi@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices

[ Upstream commit c9c96e30ecaa0aafa225aa1a5392cb7db17c7a82 ]

When allocating a range of LPIs for a Multi-MSI capable device,
this allocation extended to the closest power of 2.

But on the release path, the interrupts are released one by
one. This results in not releasing the "extra" range, leaking
the its_device. Trying to reprobe the device will then fail.

Fix it by releasing the LPIs the same way we allocate them.

Fixes: 8208d1708b88 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size")
Reported-by: Jiaxing Luo <luojiaxing@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/f5e948aa-e32f-3f74-ae30-31fee06c2a74@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: libbpf: retry loading program on EAGAIN

[ Upstream commit 86edaed379632e216a97e6bcef9f498b64522d50 ]

Commit c3494801cd17 ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.

Fixes: c3494801cd17 ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD"

[ Upstream commit 00fedbe629bfc0a51c07b6e665265ce31d8b6f3c ]

This reverts commit dbd8299c32f6f413f6cfe322fe0308f3cfc577e8.

Reason for revert:
This patch sends  msg PPSMC_MSG_DisableLowMemoryPstate(0x002e)
in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008).
This leads to SMU failing to service the request as it is
dependent on UVD to be powered ON, since it accesses UVD
registers.

This msg should ideally be sent only when the UVD is about to decode
a 4k video.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Return switch command on a timeout

[ Upstream commit ef801f07e7b3cc1786d8ab1b4fdf069cc2a136d2 ]

This patch fixes commit bcc71cc3cde1 ("scsi: qla2xxx: Fix for double
free of SRB structure") which placed code in wrong routines.

Also updated the use of WARN_ON() to WARN_ON_ONCE() to prevent
flooding log messages.

Fixes: bcc71cc3cde1 ("scsi: qla2xxx: Fix for double free of SRB structure")
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Remove all rports if fabric scan retry fails

[ Upstream commit 9ba1cb25c151de306d64647e545d34af64f30c19 ]

When all fabric scan retries fail, remove all RPorts, DMA resources for the
command. Otherwise we have stale Rports.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Turn off IOCB timeout timer on IOCB completion

[ Upstream commit e112761a4f1dcbe9fb9f43f46de7be69d6963b0d ]

Turn off IOCB timeout timer on IOCB completion instead of turning it off in a
deferred task.  This prevent false alarm if the deferred task is stalled out.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/lockdep: Add debug_locks check in __lock_downgrade()

[ Upstream commit 71492580571467fb7177aade19c18ce7486267f5 ]

Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
warning right after a previous lockdep warning. It is likely that the
previous warning turned off lock debugging causing the lockdep to have
inconsistency states leading to the lock downgrade warning.

Fix that by add a check for debug_locks at the beginning of
__lock_downgrade().

Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+53383ae265fb161ef488@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: sysfs: ratelimit property read error message

[ Upstream commit 87a2b65fc855e6be50f791c2ebbb492541896827 ]

This adds rate limiting to the message that is printed when reading a
power supply property via sysfs returns an error. This will prevent
userspace applications from unintentionally dDOSing the system by
continuously reading a property that returns an error.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sprd: Use define directive for sprd_pinconf_params values

[ Upstream commit 957063c924736d4341e5d588757b9f31e8f6fa24 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/sprd/pinctrl-sprd.c:845:19: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0},
        ~                ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/sprd/pinctrl-sprd.c:846:22: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0},
        ~                   ^~~~~~~~~~~~~~~~~~~~~~~~~~

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/138
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Clobber user CFLAGS variable

commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream.

If the build user has the CFLAGS variable set in their environment,
objtool blindly appends to it, which can cause unexpected behavior.

Clobber CFLAGS to ensure consistent objtool compilation behavior.

Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CC: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Apply AMD controller workaround for Raven platform

commit d2c63b7dfd06788a466d5ec8a850491f084c5fc2 upstream.

It's reported that the garbled sound on HP Envy x360 13z-ag000 (Ryzen
Laptop) is fixed by the same workaround applied to other AMD chips.
Update the driver_data entry for Raven (1022:15e3) to use the newly
introduced preset, AZX_DCAPS_PRESET_AMD_SB.  Since it already contains
AZX_DCAPS_PM_RUNTIME, we can drop that bit, too.

Reported-and-tested-by: Dennis Padiernos <depadiernos@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190920073040.31764-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add laptop imic fixup for ASUS M9V laptop

commit 7b485d175631be676424aedb8cd2f66d0c93da78 upstream.

The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A
codec like another HP machine.

Signed-off-by: Shih-Yuan Lee (FourDollars) <fourdollars@debian.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190920134052.GA8035@localhost
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: dice: fix wrong packet parameter for Alesis iO26

commit 3a9236e97207f2469254b4098995159b80174d95 upstream.

At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data
channels per data block in CIP.

Both iO14 and iO26 have the same contents in their configuration ROM.
For this reason, ALSA Dice driver attempts to distinguish them according
to the value of TX0_AUDIO register at probe callback. Although the way is
valid at lower and middle sampling rate, it's lastly invalid at higher
sampling rate because because the two models returns the same value for
read transaction to the register.

In the most cases, users just plug-in the device and ALSA dice driver
detects it. In the case, the device runs at lower sampling rate and
the driver detects expectedly. For this reason, this commit leaves the
way to detect as is.

Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add DSD support for EVGA NU Audio

commit f41f900568d9ffd896cc941db7021eb14bd55910 upstream.

EVGA NU Audio is actually a USB audio device on a PCIexpress card,
with it's own USB controller. It supports both PCM and DSD.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190924071143.30911-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add Hiby device family to quirks for native DSD support

commit 029d2c0fd61eac74700fb4ffff36fc63bfff7e5e upstream.

This patch adds quirk VID ID for Hiby portable players family with
native DSD playback support.

Signed-off-by: Ilya Pshonkin <sudokamikaze@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190917074937.157802-1-ilya.pshonkin@netforce.ua
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl: Fix of-node refcount unbalance in fsl_ssi_probe_from_dt()

commit 2757970f6d0d0a112247600b23d38c0c728ceeb3 upstream.

The node obtained from of_find_node_by_path() has to be unreferenced
after the use, but we forgot it for the root node.

Fixes: f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support")
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: cht_bsw_max98090_ti: Enable codec clock once and keep it enabled

commit 4bcdec39c454c4e8f9512115bdcc3efec1ba5f55 upstream.

Users have been seeing sound stability issues with max98090 codecs since:
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")

At first that commit broke sound for Chromebook Swanky and Clapper models,
the problem was that the machine-driver has been controlling the wrong
clock on those models since support for them was added. This was hidden by
clk-pmc-atom.c keeping the actual clk on unconditionally.

With the machine-driver controlling the proper clock, sound works again
but we are seeing bug reports describing it as: low volume,
"sounds like played at 10x speed" and instable.

When these issues are hit the following message is seen in dmesg:
"max98090 i2c-193C9890:00: PLL unlocked".

Attempts have been made to fix this by inserting a delay between enabling
the clk and enabling and checking the pll, but this has not helped.

It seems that at least on boards which use pmc_plt_clk_0 as clock,
if we ever disable the clk, the pll looses its lock and after that we get
various issues.

This commit fixes this by enabling the clock once at probe time on
these boards. In essence this restores the old behavior of clk-pmc-atom.c
always keeping the clk on on these boards.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-by: Mogens Jensen <mogens-jensen@protonmail.com>
Reported-by: Dean Wallace <duffydack73@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: tvp5150: fix switch exit in set control handler

commit 2d29bcc8c237874795175b2930fa9a45a115175a upstream.

The function only consists of a single switch case block without a
default case. Unsupported control requests are indicated by the -EINVAL
return code trough the last return statement at the end of the function. So
exiting just the switch case block returns the -EINVAL error code but the
hue control is supported and a zero should be returned instead.

Replace the break by a 'return 0' to fix this behaviour.

Fixes: d183e4efcae8 ("[media] v4l: tvp5150: Add missing break in set
control handler")

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: always init rs_fw with 20MHz bandwidth rates

commit 2859de7637b541dc7191f4d3fce4a1adba80fb3e upstream.

As with the non-offloaded rs case, during assoc on the ap side the phy
context is set to 20MHz until authorization of a client that supports
wider channel-widths. Support this by sending the initial
tlc_config_cmd with max supported channel width of 20MHz until
authorization succeeds.

Fixes: 6b7a5aea71b3 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: send BCAST management frames to the right station

commit 65c3b582ecab7a403efdf08babbf87fdbe27369c upstream.

Probe responses were sent to the multicast station while
they should be routed to the broadcast station.
This has no negative effect since the frame was still
routed to the right queue, but it looked very fishy
to send a frame to a (queue, station) tuple where
'queue' is not mapped to 'station'.

Fixes: 7c305de2b954 ("iwlwifi: mvm: Direct multicast frames to the correct station")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Rx, Check ip headers sanity

[ Upstream commit 0318a7b7fcad9765931146efa7ca3a034194737c ]

In the two places is_last_ethertype_ip is being called, the caller will
be looking inside the ip header, to be safe, add ip{4,6} header sanity
check. And return true only on valid ip headers, i.e: the whole header
is contained in the linear part of the skb.

Note: Such situation is very rare and hard to reproduce, since mlx5e
allocates a large enough headroom to contain the largest header one can
imagine.

Fixes: fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Rx, Fixup skb checksum for packets with tail padding

[ Upstream commit 0aa1d18615c163f92935b806dcaff9157645233a ]

When an ethernet frame with ip payload is padded, the padding octets are
not covered by the hardware checksum.

Prior to the cited commit, skb checksum was forced to be CHECKSUM_NONE
when padding is detected. After it, the kernel will try to trim the
padding bytes and subtract their checksum from skb->csum.

In this patch we fixup skb->csum for any ip packet with tail padding of
any size, if any padding found.
FCS case is just one special case of this general purpose patch, hence,
it is removed.

Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"),
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: XDP, Avoid checksum complete when XDP prog is loaded

[ Upstream commit 5d0bb3bac4b9f6c22280b04545626fdfd99edc6b ]

XDP programs might change packets data contents which will make the
reported skb checksum (checksum complete) invalid.

When XDP programs are loaded/unloaded set/clear rx RQs
MLX5E_RQ_STATE_NO_CSUM_COMPLETE flag.

Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Allow reporting of checksum unnecessary

[ Upstream commit b856df28f9230a47669efbdd57896084caadb2b3 ]

Currently we practically never report checksum unnecessary, because
for all IP packets we take the checksum complete path.

Enable non-default runs with reprorting checksum unnecessary, using
an ethtool private flag. This can be useful for performance evals
and other explorations.

Required by downstream patch which fixes XDP checksum.

Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: fix get_ip_proto()

[ Upstream commit ef6fcd455278c2be3032a346cc66d9dd9866b787 ]

IP header is not necessarily located right after struct ethhdr,
there could be multiple 802.1Q headers in between, this is why
we call __vlan_get_protocol().

Fixes: fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets")
Cc: Alaa Hleihel <alaa@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets

[ Upstream commit fe1dc069990c1f290ef6b99adb46332c03258f38 ]

CHECKSUM_COMPLETE is not applicable to SCTP protocol.
Setting it for SCTP packets leads to CRC32c validation failure.

Fixes: bbceefce9adf ("net/mlx5e: Support RX CHECKSUM_COMPLETE")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Set ECN for received packets using CQE indication

[ Upstream commit f007c13d4ad62f494c83897eda96437005df4a91 ]

In multi-host (MH) NIC scheme, a single HW port serves multiple hosts
or sockets on the same host.
The HW uses a mechanism in the PCIe buffer which monitors
the amount of consumed PCIe buffers per host.
On a certain configuration, under congestion,
the HW emulates a switch doing ECN marking on packets using ECN
indication on the completion descriptor (CQE).

The driver needs to set the ECN bits on the packet SKB,
such that the network stack can react on that, this commit does that.

Needed by downstream patch which fixes a mlx5 checksum issue.

Fixes: bbceefce9adf ("net/mlx5e: Support RX CHECKSUM_COMPLETE")
Signed-off-by: Natali Shechtman <natali@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: fix deadlock in cached root handling

commit 7e5a70ad88b1e6f6d9b934b2efb41afff496820f upstream.

Prevent deadlock between open_shroot() and
cifs_mark_open_files_invalid() by releasing the lock before entering
SMB2_open, taking it again after and checking if we still need to use
the result.

Link: https://lore.kernel.org/linux-cifs/684ed01c-cbca-2716-bc28-b0a59a0f8521@prodrive-technologies.com/T/#u
Fixes: 3d4ef9a15343 ("smb3: fix redundant opens on root")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix missing break in switch statement

commit 5fc194ea6d34dfad9833d3043ce41d6c52aff39a upstream.

Add missing break statement in order to prevent the code from falling
through to case CRYPTO_ALG_TYPE_AHASH.

Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()

commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream.

As reported by the OpenWRT team, write requests sometimes fail on some
platforms.
Currently to check the state chip_ready() is used correctly as described by
the flash memory S29GL256P11TFI01 datasheet.
Also chip_good() is used to check if the write is succeeded and it was
implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error
checking").
But actually the write failure is caused on some platforms and also it can
be fixed by using chip_good() to check the state and retry instead.
Also it seems that it is caused after repeated about 1,000 times to retry
the write one word with the reset command.
By using chip_good() to check the state to be done it can be reduced the
retry with reset.
It is depended on the actual flash chip behavior so the root cause is
unknown.

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Reported-by: Fabio Bettoni <fbettoni@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
[vigneshr@ti.com: Fix a checkpatch warning]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Add quirk for HP X500 PIXART OEM mouse

commit 2acf40f0454d41b8d51c95d317283c20c931164d upstream.

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.

Ville Viinikka (viinikv) reported and tested the quirk.
Link: https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org # v4.16+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hidraw: Fix invalid read in hidraw_ioctl

commit 416dacb819f59180e4d86a5550052033ebb6d72c upstream.

The syzbot fuzzer has reported a pair of problems in the
hidraw_ioctl() function: slab-out-of-bounds read and use-after-free
read.  An example of the first:

BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525
Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833

CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  strlen+0x79/0x90 lib/string.c:525
  strlen include/linux/string.h:281 [inline]
  hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446
  vfs_ioctl fs/ioctl.c:46 [inline]
  file_ioctl fs/ioctl.c:509 [inline]
  do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696
  ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713
  __do_sys_ioctl fs/ioctl.c:720 [inline]
  __se_sys_ioctl fs/ioctl.c:718 [inline]
  __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
  do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4
R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff

The two problems have the same cause: hidraw_ioctl() fails to test
whether the device has been removed.  This patch adds the missing test.

Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: logitech: Fix general protection fault caused by Logitech driver

commit 5f9242775bb61f390f0885f23fc16397262c7538 upstream.

The syzbot fuzzer found a general protection fault in the HID subsystem:

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069
Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02
00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48
89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00
RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000
RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a
RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25
R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004
R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048
FS:  00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline]
  usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707
  usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234
  hid_hw_power include/linux/hid.h:1038 [inline]
  hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282
  chrdev_open+0x219/0x5c0 fs/char_dev.c:413
  do_dentry_open+0x497/0x1040 fs/open.c:778
  do_last fs/namei.c:3416 [inline]
  path_openat+0x1430/0x3ff0 fs/namei.c:3533
  do_filp_open+0x1a1/0x280 fs/namei.c:3563
  do_sys_open+0x3c0/0x580 fs/open.c:1070
  do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

It turns out the fault was caused by a bug in the HID Logitech driver,
which violates the requirement that every pathway calling
hid_hw_start() must also call hid_hw_stop().  This patch fixes the bug
by making sure the requirement is met.

Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: sony: Fix memory corruption issue on cleanup.

commit 2bcdacb70327013ca2066bfcf2af1009eff01f1d upstream.

The sony driver is not properly cleaning up from potential failures in
sony_input_configured. Currently it calls hid_hw_stop, while hid_connect
is still running. This is not a good idea, instead hid_hw_stop should
be moved to sony_probe. Similar changes were recently made to Logitech
drivers, which were also doing improper cleanup.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: prodikeys: Fix general protection fault during probe

commit 98375b86c79137416e9fd354177b85e768c16e56 upstream.

The syzbot fuzzer provoked a general protection fault in the
hid-prodikeys driver:

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300  [inline]
RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline]
RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline]
RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836
Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc
48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f
85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b

The problem is caused by the fact that pcmidi_get_output_report() will
return an error if the HID device doesn't provide the right sort of
output report, but pcmidi_set_operational() doesn't bother to check
the return code and assumes the function call always succeeds.

This patch adds the missing check and aborts the probe operation if
necessary.

Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Add an unbound WQ type to the new CQ API

commit f794809a7259dfaa3d47d90ef5a86007cf48b1ce upstream.

The upstream kernel commit cited below modified the workqueue in the
new CQ API to be bound to a specific CPU (instead of being unbound).
This caused ALL users of the new CQ API to use the same bound WQ.

Specifically, MAD handling was severely delayed when the CPU bound
to the WQ was busy handling (higher priority) interrupts.

This caused a delay in the MAD "heartbeat" response handling,
which resulted in ports being incorrectly classified as "down".

To fix this, add a new "unbound" WQ type to the new CQ API, so that users
have the option to choose either a bound WQ or an unbound WQ.

For MADs, choose the new "unbound" WQ.

Fixes: b7363e67b23e ("IB/device: Convert ib-comp-wq to be CPU-bound")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.m>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines

[ Upstream commit 0f0727d971f6fdf8f1077180d495ddb9928f0c8b ]

arch/x86/Makefile disables SSE and SSE2 for the whole kernel.  The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2.  Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines for Clang.

This was originally landed in:
commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
but reverted in:
commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")
due to bugreports from GCC builds. Add guards to only do so for Clang.

Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive: Fix bogus error code returned by OPAL

commit 6ccb4ac2bf8a35c694ead92f8ac5530a16e8f2c8 upstream.

There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call
to return the 32-bit value 0xffffffff when OPAL has run out of IRQs.
Unfortunatelty, OPAL return values are signed 64-bit entities and
errors are supposed to be negative. If that happens, the linux code
confusingly treats 0xffffffff as a valid IRQ number and panics at some
point.

A fix was recently merged in skiboot:

e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")

but we need a workaround anyway to support older skiboots already
in the field.

Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error
returned upon resource exhaustion.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan
(groug: fix arch/powerpc/platforms/powernv/opal-wrappers.S instead of
        non-existing arch/powerpc/platforms/powernv/opal-call.c)
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/restrack: Protect from reentry to resource return path

commit fe9bc1644918aa1d02a889b4ca788bfb67f90816 upstream.

Nullify the resource task struct pointer to ensure that subsequent calls
won't try to release task_struct again.

------------[ cut here ]------------
ODEBUG: free active (active state 1) object type: rcu_head hint:
(null)
WARNING: CPU: 0 PID: 6048 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Kernel panic - not syncing: panic_on_warn set ...

CPU: 0 PID: 6048 Comm: syz-executor022 Not tainted
4.19.0-rc7-next-20181008+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x244/0x3ab lib/dump_stack.c:113
  panic+0x238/0x4e7 kernel/panic.c:184
  __warn.cold.8+0x163/0x1ba kernel/panic.c:536
  report_bug+0x254/0x2d0 lib/bug.c:186
  fixup_bug arch/x86/kernel/traps.c:178 [inline]
  do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
  do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290
  invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969
RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Code: 41 88 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 92 00 00 00 48 8b 14
dd
60 02 41 88 4c 89 fe 48 c7 c7 00 f8 40 88 e8 36 2f b4 fd <0f> 0b 83 05
a9
f4 5e 06 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f
RSP: 0018:ffff8801d8c3eda8 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8164d235 RDI: 0000000000000005
RBP: ffff8801d8c3ede8 R08: ffff8801d70aa280 R09: ffffed003b5c3eda
R10: ffffed003b5c3eda R11: ffff8801dae1f6d7 R12: 0000000000000001
R13: ffffffff8939a760 R14: 0000000000000000 R15: ffffffff8840fca0
  __debug_check_no_obj_freed lib/debugobjects.c:786 [inline]
  debug_check_no_obj_freed+0x3ae/0x58d lib/debugobjects.c:818
  kmem_cache_free+0x202/0x290 mm/slab.c:3759
  free_task_struct kernel/fork.c:163 [inline]
  free_task+0x16e/0x1f0 kernel/fork.c:457
  __put_task_struct+0x2e6/0x620 kernel/fork.c:730
  put_task_struct include/linux/sched/task.h:96 [inline]
  finish_task_switch+0x66c/0x900 kernel/sched/core.c:2715
  context_switch kernel/sched/core.c:2834 [inline]
  __schedule+0x8d7/0x21d0 kernel/sched/core.c:3480
  schedule+0xfe/0x460 kernel/sched/core.c:3524
  freezable_schedule include/linux/freezer.h:172 [inline]
  futex_wait_queue_me+0x3f9/0x840 kernel/futex.c:2530
  futex_wait+0x45c/0xa50 kernel/futex.c:2645
  do_futex+0x31a/0x26d0 kernel/futex.c:3528
  __do_sys_futex kernel/futex.c:3589 [inline]
  __se_sys_futex kernel/futex.c:3557 [inline]
  __x64_sys_futex+0x472/0x6a0 kernel/futex.c:3557
  do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446549
Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f3a998f5da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: ffffffffffffffda RBX: 00000000006dbc38 RCX: 0000000000446549
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006dbc38
RBP: 00000000006dbc30 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc3c
R13: 2f646e6162696e69 R14: 666e692f7665642f R15: 00000000006dbd2c
Kernel Offset: disabled

Reported-by: syzbot+71aff6ea121ffefc280f@syzkaller.appspotmail.com
Fixes: ed7a01fd3fd7 ("RDMA/restrack: Release task struct which was hold by CM_ID object")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ibmvnic: free reset work of removed device from queue

[ Upstream commit 1c2977c094998de032fee6e898c88b4a05483d08 ]

Commit 36f1031c51a2 ("ibmvnic: Do not process reset during or after
 device removal") made the change to exit reset if the driver has been
removed, but does not free reset work items of the adapter from queue.

Ensure all reset work items are freed when breaking out of the loop early.

Fixes: 36f1031c51a2 ("ibmnvic: Do not process reset during or after device removal”)
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "Bluetooth: validate BLE connection interval updates"

[ Upstream commit 68d19d7d995759b96169da5aac313363f92a9075 ]

This reverts commit c49a8682fc5d298d44e8d911f4fa14690ea9485e.

There are devices which require low connection intervals for usable operation
including keyboards and mice. Forcing a static connection interval for
these types of devices has an impact in latency and causes a regression.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.75

media: technisat-usb2: break out of loop at end of buffer

commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b upstream.

Ensure we do not access the buffer beyond the end if no 0xff byte
is encountered.

Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field

commit 2a355ec25729053bb9a1a89b6c1d1cdd6c3b3fb1 upstream.

While the CSV3 field of the ID_AA64_PFR0 CPU ID register can be checked
to see if a CPU is susceptible to Meltdown and therefore requires kpti
to be enabled, existing CPUs do not implement this field.

We therefore whitelist all unaffected Cortex-A CPUs that do not implement
the CSV3 field.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>