Remove e1000 rom loading hack

The gPXE rom supports BEV properly.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Switch from etherboot to gPXE

etherboot is deprecated and not under active development anymore.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Switch pc bios from pc-bios to seabios

SeaBIOS is a port of pc-bios to GCC.  Besides using a more modern tool chain,
SeaBIOS introduces a number of new features including PMM support, better
BEV and BCV support, and better PnP support.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Update SeaBIOS to latest upstream

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

virtio-net: fix macaddr config regression

This commit:

    commit 97b15621
    virtio: use qdev properties for configuration.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
makes a guest using virtio-net see an empty macaddr because we never
copy the macaddr into the location that virtio_net_get_config() uses.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

qemu/msix: fix table access issues

Fixes a couple of issues with msix table access:
- With misbehaving guests, misaligned 4 byte access could overflow
  msix table and cause qemu to segfault. Since PCI spec requires
  host to only issue dword-aligned accesses, as a fix,
  it's enough to mask the address low bits.
- Tables use pci format, not native format, and so
  we must use pci_[sg]et_long on read/write.

Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

qemu/virtio: make wmb compiler barrier + comments

wmb must be at least a compiler barrier, even without SMP.
Further, we likely need some rmb()/mb() as well:
I have not audited the code but lguest has mb(),
add a comment for now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Remove aio_ctx from paio_* interface

The context parameter in paio_submit isn't used anyway, so there is no reason
why block drivers should need to remember it. This also avoids passing a Linux
AIO context to paio_submit (which doesn't do any harm as long as the parameter
is unused, but it is highly confusing).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Add *CFLAGS to LINK in rules.mak

Sometimes when linking with gcc to get a predictable result you are suggested to also apply the compiler flags to the linker command.

For reference, please read:
http://gcc.gnu.org/onlinedocs/gcc-4.4.2/gcc/Link-Options.html

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

serial: Add missing bit

Serial frames always start with a start bit.
This bit was missing in frame size calculation.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

serial: Support additional serial speed values

* Allow any speed value which is defined for Linux
  (and possibly other systems).
* Compare int values instead of double values.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb: print attached status in info qtree

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb-host: use qdev for -usbdevice + rework.

Changes:

 * We don't create/delete devices, we attach/detach them instead.
 * The separate autofilter list is gone, we simply walk the list
   of devices directly instead.
 * Autofiltering is done unconditionally now.  Non-auto device scan
   code got dropped.
 * Autofiltering turns off the timer if there is nothing to do, it
   runs only in case there are unattached host devices.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb-storage: use qdev for -usbdevice

Hook up usb_msd_init.

Also rework handling of encrypted block devices,
move the code out vl.c.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb: make attach optional.

Add a auto_attach field to USBDevice, which is enabled by default.
USB drivers can clear this field in case they do *not* want the device
being attached (i.e. plugged into a usb port) automatically after
successfull init().

Use cases (see next patches):
 * attaching encrypted mass storage devices.
 * -usbdevice host:...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb-serial and braille: use qdev for -usbdevice

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb-hid: use qdev for -usbdevice

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

usb core: use qdev for -usbdevice

This patchs adds infrastructure to handle -usbdevice via qdev callbacks.
USBDeviceInfo gets a name field (for the -usbdevice driver name) and a
callback for -usbdevice parameter parsing.

The new usbdevice_create() function walks the qdev driver list and looks
for a usb driver with a matching name.  When a parameter parsing
callback is present it is called, otherwise the device is created via
usb_create_simple().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

use rom loader for pc bios.

The pc bios shows up in 'info roms' now.

Note that the BIOS is mapped to two places: The complete rom at the top
of the memory, and the first 128k at 0xe0000.  Only the first place is
listed in 'info roms'.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga roms: move loading from pc.c to vga drivers.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

rom loader: make vga+rom loading configurable.

The rom_add_vga() and rom_add_option() macros are transformed into
functions.  They look at the new rom_enable_driver_roms variable
and only do something if it is set to non-zero, making vga+option rom
loading runtime option.  pc_init() sets rom_enable_driver_roms to 1.

With this in place we can move the rom loading calls from pc.c to the
individual drivers.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

rom loader: use qemu_strdup.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move UFO support detection to tap-linux.c

Only supported on Linux

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move tap_set_offload() code into tap-linux.c

TUNSETOFFLOAD is only available on Linux

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move tap_probe_vnet_hdr() to tap-linux.c

Only Linux has support for IFF_VNET_HDR

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move tap_set_sndbuf() to tap-linux.c

TUNSETSNDBUF is only available on linux

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move linux code into net/tap-linux.c

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

build: add CONFIG_LINUX

So I can add a tap-linux.c and use CONFIG_LINUX to pull it in
in Makefile

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move AIX code into net/tap-aix.c

Okay, this makes the tap options available on AIX even though there's
no support, but if we want to do it right we should have not compile
the tap code at all on AIX using e.g. CONFIG_TAP.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move solaris code to net/tap-solaris.c

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: split BSD tap_open() out into net/tap-bsd.c

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: split all the tap code out into net/tap.c

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move tap-linux.h under net/

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move more stuff into net/tap-win32.c, add net/tap.h

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move tap-win32.c under net/

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move net-checksum.c under net/

Also add a new net/checksum.h header

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: move net-queue.[ch] under net/

[v2: handle building in a separate dir]

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Revert "char: emit the OPENED event only when a new char connection is opened"

This reverts commit 6cfa64de908d67fb6f6b6e3ae4888dd863f69e44.

This breaks the monitor prompt.  Proper fix will come from Amit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

really fix net.h

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Fix signature of new_vlan_client

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

virtio-net: add tap_has_ufo flag to saved state

If we tell the guest we support UFO and then migrate to host which
doesn't support it, we will find ourselves in grave difficulties.

Prevent this scenario by adding a flag to virtio-net's savevm format
which indicates whether the device requires host UFO support.

[v2:
  - add has_ufo uint8_t field for ease of vmstate conversion
  - use qemu_error()
]

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Enable UFO on virtio-net and tap devices

Enable UFO on the host tap device if supported and allow setting UFO
on virtio-net in the guest.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Work around dhclient brokenness

With the latest GSO/csum offload patches, any guest using an unpatched version
of dhclient (any Ubuntu guest, for instance), will no longer be able to get
a DHCP address.

dhclient is actually at fault here.  It uses AF_PACKET to receive DHCP responses
but does not check auxdata to see if the packet has a valid csum.  This causes
it to throw out the DHCP responses it gets from the virtio interface as there
is not a valid checksum.

Fedora has carried a patch to fix their dhclient (it's needed for Xen too) but
this patch has not made it into a release of dhclient.  AFAIK, the patch is in
the dhclient CVS but I cannot confirm since their CVS is not public.

This patch, suggested by Rusty, looks for UDP packets (of a normal MTU) and
explicitly adds a checksum to them if they are missing one.

This allows unpatched dhclients to continue to work without needing to update
the guest kernels.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

virtio-net: enable tap offload if guest supports it

We query the guest's feature set to see if it supports offload and,
if so, we enable those features on the tap interface.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add tap_set_offload()

This API allows virtio-net to enable various offload features on a
tap interface - e.g. to tell the host kernel it can pass up partial
checksums to userspace.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

virtio-net: add vnet_hdr support

With '-netdev tap,id=foo -nic model=virtio,netdev=foo' virtio-net can
detect that its peer (i.e. the tap backend) supports vnet headers
and advertise to the guest that it can send packets with partial
checksums and/or TSO packets.

One complication is that if we're migrating and the source host
supports IFF_VNET_HDR but the destination host doesn't, we can't then
stop the guest from using those features. In this scenario, we just
fail the migration.

[v2:
 - add has_vnet_hdr uint32_t field for ease of vmstate conversion
 - use qemu_error()
]

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: implement tap support for receive_raw()

tap_receive_raw() always prepends a vnet header if IFF_VNET_HDR is
enabled.

tap_receive() only prepends when the a header is required but the NIC
doesn't supply one.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: use qemu_send_packet_raw() in qemu_announce_self()

Use qemu_send_packet_raw to send gratuitous arp. This will ensure that
vnet header is handled properly.

Also, avoid sending the gratuitous packet to the guest. There doesn't
appear to be any reason for doing that and the code will currently just
crash if the NIC is not associated with a vlan.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add receive_raw parameter to qemu_new_vlan_client()

Trivial patch to allow supplying a receive_raw function.

A future cleanup should combine this function pointer parameters into a
table.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add an API for 'raw' packets

In the case where a NIC and backend agree on a packet header format,
this API allows injecting packets which lack the agreed upon header.

We need this for sending our gratuitous ARP.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add flags parameter to packet queue interface

This allows for the addition of a raw flag, and leaves the way open
for other flags too.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add tap_has_vnet_hdr() and tap_using_vnet_hdr() APIs

These lamely named functions allow virtio-net to query whether
IFF_VNET_HDR is enabled on a tap interface and inform the tap code
that virtio-net will supply packets with a vnet header.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add a client type code

This is so as to allow APIs which operate on specific client types
without having to add a function table entry which is only implemented
by a single client type.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: add a vnet_hdr=on|off parameter

This allows people to disable the IFF_VNET_HDR flag, e.g. for debugging
purposes or if they know they may migrate the guest to a machine without
IFF_VNET_HDR support.

It also allows making the lack of IFF_VNET_HDR support an error
condition, e.g. in the case where a guest is being migrated from a host
which does support it.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: refactor tap initialization

Re-factor things so that there is only one call site for
net_tap_fd_init().

Two concerns about the QemuOpts usage here - firstly, we set the script
arguments to their default value and, secondly, we set the ifname value
to the name allocated by the kernel if none is supplied. Are we okay
with such things ending up in writeconfig output?

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: enable IFF_VNET_HDR on tap fds if available

For now, we just add an empty header before writing and strip the header
after reading.

We really only want IFF_VNET_HDR when virtio_net is using it, but it
would significantly complicate matters to try and do that. There should
be little or no performance impact with always adding headers.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: make tap_receive() re-use tap_receive_iov() code

In future we will want to prepend a virtio_net header if the NIC didn't
supply one but IFF_VNET_HDR is enabled on the interface. This is most
easily achived by using writev() in all cases.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: import linux tap ioctl definitions

Making features dependent on the availability of newer versions if_tun.h
is going to get seriously clumsy, so let's just import the definitions
we need. It's only a small handful.

If and when we're comfortable depending on 2.6.30 headers, we can remove
this again.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: remove unused includes of if_tun.h and if_tap.h

Looks like these are just artifacts of vl.c being split up.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Revert "qcow2: Bring synchronous read/write back to life"

It was merely a workaround and the real fix is done now.
This reverts commit ef845c3bf421290153154635dc18eaa677cecb43.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

linux-aio: Honour AsyncContext

Also for Linux AIO, don't call callbacks that don't belong to the active
AsyncContext.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

posix-aio-compat: Honour AsyncContext

Don't call callbacks that don't belong to the active AsyncContext.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

block: Use new AsyncContext for bdrv_read/write emulation

bdrv_read/write emulation is used as the perfect example why we need something
like AsyncContexts. So maybe they better start using it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce contexts for asynchronous callbacks

Add the possibility to use AIO and BHs without allowing foreign callbacks to be
run. Basically, you put your own AIOs and BHs in a separate context. For
details see the comments in the source.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Split out bottom halves

Instead of putting more and more stuff into vl.c, let's have the generic
functions that deal with asynchronous callbacks in their own file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Add qemu_aio_process_queue()

We'll leave some AIO completions unhandled when we can't call the callback.
qemu_aio_process_queue() is used later to run any callbacks that are left and
can be run then.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

posix-aio-compat: Split out posix_aio_process_queue

We need to process the request queue and run callbacks separately from reading
out the queue in a later patch, so split it out.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_closefd() to QObject

Note that errors are not being converted yet.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_getfd() to QObject

Note that errors are not being converted yet.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_eject() to QObject

Note that errors are not being converted yet.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_pci_device_hot_remove() to QObject

Errors are still directly printed, as we are only converting
regular output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_migrate_cancel() to QObject

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_migrate_set_speed() to QObject

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_migrate() to QObject

Error is still directly printed, as we are only converting
regular output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_physical_memory_save() to QObject

Note that errors are not being converted yet.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Convert do_memory_save() to QObject

Note that errors are not being converted yet.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

lsi_scsi: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmstate: Add VMSTATE_BUFFER_UNSAFE

Just sent <anything> as a buffer.  We put the pointer and the size
code does the rest.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: the support to change dinamically depth is not there

For a start bypp is not changed after vmsvga_reset() and it depends on depth

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: scratch is really an array of uint32_t

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: remove !EMBED_STDVGA code

It don't compile.  And the trivial fixes (change vga.foo field to foo field
don't work either.  No output

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: qemu_malloc() returns void *

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: Remove uselss casts from void *

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmware_vga: Pass pci_vmsga_state_t arg no VGACommonState

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: remove unused vga_common_save/load

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: port vga-pci to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: port vmware std vga to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: port vga-isa to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: port vga-isa-mm to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: port vga_common_save/load to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: create is_vbe_vmstate field

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

e1000: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

e1000: unfold mac_regarraystosave array

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

e1000: unfold mac_reg_tosave array

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ne2000: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pcnet: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

eepro100: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

eeprom93xx: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

rtl8139: port to vmstate

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>