io_uring: fix 32-bit compatability with sendmsg/recvmsg

commit d876836204897b6d7d911f942084f69a1e9d5c4d upstream.

We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise
the iovec import for these commands will not do the right thing and fail
the command with -EINVAL.

Found by running the test suite compiled as 32-bit.

Cc: stable@vger.kernel.org
Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()")
Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Fix policy initialization for internal governor drivers

commit f5739cb0b56590d68d8df8a44659893b6d0084c3 upstream.

Before commit 1e4f63aecb53 ("cpufreq: Avoid creating excessively
large stack frames") the initial value of the policy field in struct
cpufreq_policy set by the driver's ->init() callback was implicitly
passed from cpufreq_init_policy() to cpufreq_set_policy() if the
default governor was neither "performance" nor "powersave".  After
that commit, however, cpufreq_init_policy() must take that case into
consideration explicitly and handle it as appropriate, so make that
happen.

Fixes: 1e4f63aecb53 ("cpufreq: Avoid creating excessively large stack frames")
Link: https://lore.kernel.org/linux-pm/39fb762880c27da110086741315ca8b111d781cd.camel@gmail.com/
Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

amdgpu/gmc_v9: save/restore sdpif regs during S3

commit a3ed353cf8015ba84a0407a5dc3ffee038166ab0 upstream.

fixes S3 issue with IOMMU + S/G  enabled @ 64M VRAM.

Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

commit 66d0e797bf095d407479c89952d42b1d96ef0a7f upstream.

This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14.

The name changing as devfreq(X) breaks some user space applications,
such as Android HAL from Unisoc and Hikey [1].
The device name will be changed unexpectly after every boot depending
on module init sequence. It will make trouble to setup some system
configuration like selinux for Android.

So we'd like to revert it back to old naming rule before any better
way being found.

[1] https://lkml.org/lkml/2018/5/8/1042

Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Orson Zhai <orson.unisoc@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Disable trace_printk() on post poned tests

commit 78041c0c9e935d9ce4086feeff6c569ed88ddfd4 upstream.

The tracing seftests checks various aspects of the tracing infrastructure,
and one is filtering. If trace_printk() is active during a self test, it can
cause the filtering to fail, which will disable that part of the trace.

To keep the selftests from failing because of trace_printk() calls,
trace_printk() checks the variable tracing_selftest_running, and if set, it
does not write to the tracing buffer.

As some tracers were registered earlier in boot, the selftest they triggered
would fail because not all the infrastructure was set up for the full
selftest. Thus, some of the tests were post poned to when their
infrastructure was ready (namely file system code). The postpone code did
not set the tracing_seftest_running variable, and could fail if a
trace_printk() was added and executed during their run.

Cc: stable@vger.kernel.org
Fixes: 9afecfbb95198 ("tracing: Postpone tracer start-up tests till the system is more robust")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macintosh: therm_windtunnel: fix regression when instantiating devices

commit 38b17afb0ebb9ecd41418d3c08bcf9198af4349d upstream.

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Inline drm_get_pci_dev

commit eb12c957735b582607e5842a06d1f4c62e185c1d upstream.

It's the last user, and more importantly, it's the last non-legacy
user of anything in drm_pci.c.

The only tricky bit is the agp initialization. But a close look shows
that radeon does not use the drm_agp midlayer (the main use of that is
drm_bufs for legacy drivers), and instead could use the agp subsystem
directly (like nouveau does already). Hence we can just pull this in
too.

A further step would be to entirely drop the use of drm_device->agp,
but feels like too much churn just for this patch.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Drop DRIVER_USE_AGP

commit 8a3bddf67ce88b96531fb22c5a75d7f4dc41d155 upstream.

This doesn't do anything except auto-init drm_agp support when you
call drm_get_pci_dev(). Which amdgpu stopped doing with

commit b58c11314a1706bf094c489ef5cb28f76478c704
Author: Alex Deucher <alexander.deucher@amd.com>
Date:   Fri Jun 2 17:16:31 2017 -0400

    drm/amdgpu: drop deprecated drm_get_pci_dev and drm_put_dev

No idea whether this was intentional or accidental breakage, but I
guess anyone who manages to boot a this modern gpu behind an agp
bridge deserves a price. A price I never expect anyone to ever collect
:-)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Xiaojie Yuan <xiaojie.yuan@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: "Tianci.Yin" <tianci.yin@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: increase HID report buffer size to 8KiB

commit 84a4062632462c4320704fcdf8e99e89e94c0aba upstream.

We have a HID touch device that reports its opens and shorts test
results in HID buffers of size 8184 bytes. The maximum size of the HID
buffer is currently set to 4096 bytes, causing probe of this device to
fail. With this patch we increase the maximum size of the HID buffer to
8192 bytes, making device probe and acquisition of said buffers succeed.

Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: fix off-by-one memset in hid_report_raw_event()

commit 5ebdffd25098898aff1249ae2f7dbfddd76d8f8f upstream.

In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated,
but the report-number byte is not correctly handled. This results in a
off-by-one in the following memset, causing a kernel Oops and ensuing
system crash.

Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in
hid_field_extract") I no longer hit the kernel Oops as we instead fail
"controlled" at probe if there is a report too long in the HID
report-descriptor. hid_report_raw_event() is an exported symbol, so
presumabely we cannot always rely on this being the case.

Fixes: 966922f26c7f ("HID: fix a crash in hid_report_raw_event()
                     function.")
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock

commit beae56192a2570578ae45050e73c5ff9254f63e6 upstream.

Commit 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard
dock") added the USB id for the Acer SW5-012's keyboard dock to the
hid-ite driver to fix the rfkill driver not working.

Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the
"Wireless Radio Control" bits which need the special hid-ite driver on the
second USB interface (the mouse interface) and their touchpad only supports
mouse emulation, so using generic hid-input handling for anything but
the "Wireless Radio Control" bits is fine. On these devices we simply bind
to all USB interfaces.

But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10
(SW5-012)'s touchpad not only does mouse emulation it also supports
HID-multitouch and all the keys including the "Wireless Radio Control"
bits have been moved to the first USB interface (the keyboard intf).

So we need hid-ite to handle the first (keyboard) USB interface and have
it NOT bind to the second (mouse) USB interface so that that can be
handled by hid-multitouch.c and we get proper multi-touch support.

This commit changes the hid_device_id for the SW5-012 keyboard dock to
only match on hid devices from the HID_GROUP_GENERIC group, this way
hid-ite will not bind the the mouse/multi-touch interface which has
HID_GROUP_MULTITOUCH_WIN_8 as group.
This fixes the regression to mouse-emulation mode introduced by adding
the keyboard dock USB id.

Cc: stable@vger.kernel.org
Fixes: 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock")
Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: check descriptor table exits on instruction emulation

commit 86f7e90ce840aa1db407d3ea6e9b3a52b2ce923c upstream.

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: watchdog: Fix gas->access_width usage

commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream.

ACPI Generic Address Structure (GAS) access_width field is not in bytes
as the driver seems to expect in few places so fix this by using the
newly introduced macro ACPI_ACCESS_BYTE_WIDTH().

Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment")
Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro

commit 1dade3a7048ccfc675650cd2cf13d578b095e5fb upstream.

Sometimes it is useful to find the access_width field value in bytes and
not in bits so add a helper that can be used for this purpose.

Suggested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: always check the netlink payload length in audit_receive_msg()

commit 756125289285f6e55a03861bf4b6257aa3d19a93 upstream.

This patch ensures that we always check the netlink payload length
in audit_receive_msg() before we take any action on the payload
itself.

Cc: stable@vger.kernel.org
Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com
Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix error handling in audit_data_to_entry()

commit 2ad3e17ebf94b7b7f3f64c050ff168f9915345eb upstream.

Commit 219ca39427bf ("audit: use union for audit_field values since
they are mutually exclusive") combined a number of separate fields in
the audit_field struct into a single union.  Generally this worked
just fine because they are generally mutually exclusive.
Unfortunately in audit_data_to_entry() the overlap can be a problem
when a specific error case is triggered that causes the error path
code to attempt to cleanup an audit_field struct and the cleanup
involves attempting to free a stored LSM string (the lsm_str field).
Currently the code always has a non-NULL value in the
audit_field.lsm_str field as the top of the for-loop transfers a
value into audit_field.val (both .lsm_str and .val are part of the
same union); if audit_data_to_entry() fails and the audit_field
struct is specified to contain a LSM string, but the
audit_field.lsm_str has not yet been properly set, the error handling
code will attempt to free the bogus audit_field.lsm_str value that
was set with audit_field.val at the top of the for-loop.

This patch corrects this by ensuring that the audit_field.val is only
set when needed (it is cleared when the audit_field struct is
allocated with kcalloc()).  It also corrects a few other issues to
ensure that in case of error the proper error code is returned.

Cc: stable@vger.kernel.org
Fixes: 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive")
Reported-by: syzbot+1f4d90ead370d72e450b@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()

commit 37b0b6b8b99c0e1c1f11abbe7cf49b6d03795b3f upstream.

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728b99e ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme/pci: move cqe check after device shutdown

[ Upstream commit fa46c6fb5d61b1f17b06d7c6ef75478b576304c7 ]

Many users have reported nvme triggered irq_startup() warnings during
shutdown. The driver uses the nvme queue's irq to synchronize scanning
for completions, and enabling an interrupt affined to only offline CPUs
triggers the alarming warning.

Move the final CQE check to after disabling the device and all
registered interrupts have been torn down so that we do not have any
IRQ to synchronize.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206509
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: prevent warning triggered by nvme_stop_keep_alive

[ Upstream commit 97b2512ad000a409b4073dd1a71e4157d76675cb ]

Delayed keep alive work is queued on system workqueue and may be cancelled
via nvme_stop_keep_alive from nvme_reset_wq, nvme_fc_wq or nvme_wq.

Check_flush_dependency detects mismatched attributes between the work-queue
context used to cancel the keep alive work and system-wq. Specifically
system-wq does not have the WQ_MEM_RECLAIM flag, whereas the contexts used
to cancel keep alive work have WQ_MEM_RECLAIM flag.

Example warning:

  workqueue: WQ_MEM_RECLAIM nvme-reset-wq:nvme_fc_reset_ctrl_work [nvme_fc]
is flushing !WQ_MEM_RECLAIM events:nvme_keep_alive_work [nvme_core]

To avoid the flags mismatch, delayed keep alive work is queued on nvme_wq.

However this creates a secondary concern where work and a request to cancel
that work may be in the same work queue - namely err_work in the rdma and
tcp transports, which will want to flush/cancel the keep alive work which
will now be on nvme_wq.

After reviewing the transports, it looks like err_work can be moved to
nvme_reset_wq. In fact that aligns them better with transition into
RESETTING and performing related reset work in nvme_reset_wq.

Change nvme-rdma and nvme-tcp to perform err_work in nvme_reset_wq.

Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme/tcp: fix bug on double requeue when send fails

[ Upstream commit 2d570a7c0251c594489a2c16b82b14ae30345c03 ]

When nvme_tcp_io_work() fails to send to socket due to
connection close/reset, error_recovery work is triggered
from nvme_tcp_state_change() socket callback.
This cancels all the active requests in the tagset,
which requeues them.

The failed request, however, was ended and thus requeued
individually as well unless send returned -EPIPE.
Another return code to be treated the same way is -ECONNRESET.

Double requeue caused BUG_ON(blk_queued_rq(rq))
in blk_mq_requeue_request() from either the individual requeue
of the failed request or the bulk requeue from
blk_mq_tagset_busy_iter(, nvme_cancel_request, );

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()

[ Upstream commit 47327c9315b2f3ae4ab659457977a26669631f20 ]

The IPv6 address defined in struct in6_addr is specified as
big endian, but there is no specified endian in struct
hclge_fd_rule_tuples, so it  will cause a problem if directly
use memcpy() to copy ipv6 address between these two structures
since this field in struct hclge_fd_rule_tuples is little endian.

This patch fixes this problem by using be32_to_cpu() to convert
endian of IPv6 address of struct in6_addr before copying.

Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add management table after IMP reset

[ Upstream commit d0db7ed397517c8b2be24a0d1abfa15df776908e ]

In the current process, the management table is missing after the
IMP reset. This patch adds the management table to the reset process.

Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix wrong 160/80+80 MHz setting

[ Upstream commit 33181ea7f5a62a17fbe55f0f73428ecb5e686be8 ]

Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only.
This is wrong because STA may not support > 80MHz BW.
Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz.

The "support_80_80" and "support_160" setting is based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"

Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE

[ Upstream commit ea75080110a4c1fa011b0a73cb8f42227143ee3e ]

The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute.
As a result, for strictly validated commands, it's assumed to not be
supported.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix mode output in debugging statements

[ Upstream commit f52aa79df43c4509146140de0241bc21a4a3b4c7 ]

A number of the debug statements output file or directory mode
in hex.  Change these to print using octal.

Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: update Unit Load Status bitmask to check after reset

[ Upstream commit cf8fc2a0863f9ff27ebd2efcdb1f7d378b9fb8a6 ]

After a reset the Unit Load Status bits in the GLNVM_ULD register to check
for completion should be 0x7FF before continuing.  Update the mask to check
(minus the three reserved bits that are always set).

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: ena-com.c: prevent NULL pointer dereference

[ Upstream commit c207979f5ae10ed70aff1bb13f39f0736973de99 ]

comp_ctx can be NULL in a very rare case when an admin command is executed
during the execution of ena_remove().

The bug scenario is as follows:

* ena_destroy_device() sets the comp_ctx to be NULL
* An admin command is executed before executing unregister_netdev(),
  this can still happen because our device can still receive callbacks
  from the netdev infrastructure such as ethtool commands.
* When attempting to access the comp_ctx, the bug occurs since it's set
  to NULL

Fix:
Added a check that comp_ctx is not NULL

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: ethtool: use correct value for crc32 hash

[ Upstream commit 886d2089276e40d460731765083a741c5c762461 ]

Up till kernel 4.11 there was no enum defined for crc32 hash in ethtool,
thus the xor enum was used for supporting crc32.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix corruption of dev_idx_to_host_tbl

[ Upstream commit e3f89f91e98ce07dc0f121a3b70d21aca749ba39 ]

The function ena_com_ind_tbl_convert_from_device() has an overflow
bug as explained below. Either way, this function is not needed at
all since we don't retrieve the indirection table from the device
at any point which means that this conversion is not needed.

The bug:
The for loop iterates over all io_sq_queues, when passing the actual
number of used queues the io_sq_queues[i].idx equals 0 since they are
uninitialized which results in the following code to be executed till
the end of the loop:

dev_idx_to_host_tbl[0] = i;

This results dev_idx_to_host_tbl[0] in being equal to
ENA_TOTAL_NUM_QUEUES - 1.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix incorrectly saving queue numbers when setting RSS indirection table

[ Upstream commit 92569fd27f5cb0ccbdf7c7d70044b690e89a0277 ]

The indirection table has the indices of the Rx queues. When we store it
during set indirection operation, we convert the indices to our internal
representation of the indices.

Our internal representation of the indices is: even indices for Tx and
uneven indices for Rx, where every Tx/Rx pair are in a consecutive order
starting from 0. For example if the driver has 3 queues (3 for Tx and 3
for Rx) then the indices are as follows:
0  1  2  3  4  5
Tx Rx Tx Rx Tx Rx

The BUG:
The issue is that when we satisfy a get request for the indirection
table, we don't convert the indices back to the original representation.

The FIX:
Simply apply the inverse function for the indices of the indirection
table after we set it.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: rss: store hash function as values and not bits

[ Upstream commit 4844470d472d660c26149ad764da2406adb13423 ]

The device receives, stores and retrieves the hash function value as bits
and not as their enum value.

The bug:
* In ena_com_set_hash_function() we set
  cmd.u.flow_hash_func.selected_func to the bit value of rss->hash_func.
 (1 << rss->hash_func)
* In ena_com_get_hash_function() we retrieve the hash function and store
  it's bit value in rss->hash_func. (Now the bit value of rss->hash_func
  is stored in rss->hash_func instead of it's enum value)

The fix:
This commit fixes the issue by converting the retrieved hash function
values from the device to the matching enum value of the set bit using
ffs(). ffs() finds the first set bit's index in a word. Since the function
returns 1 for the LSB's index, we need to subtract 1 from the returned
value (note that BIT(0) is 1).

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: rss: fix failure to get indirection table

[ Upstream commit 0c8923c0a64fb5d14bebb9a9065d2dc25ac5e600 ]

On old hardware, getting / setting the hash function is not supported while
gettting / setting the indirection table is.

This commit enables us to still show the indirection table on older
hardwares by setting the hash function and key to NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: rss: do not allocate key when not supported

[ Upstream commit 6a4f7dc82d1e3abd3feb0c60b5041056fcd9880c ]

Currently we allocate the key whether the device supports setting the
key or not. This commit adds a check to the allocation function and
handles the error accordingly.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix incorrect default RSS key

[ Upstream commit 0d1c3de7b8c78a5e44b74b62ede4a63629f5d811 ]

Bug description:
When running "ethtool -x <if_name>" the key shows up as all zeros.

When we use "ethtool -X <if_name> hfunc toeplitz hkey <some:random:key>" to
set the key and then try to retrieve it using "ethtool -x <if_name>" then
we return the correct key because we return the one we saved.

Bug cause:
We don't fetch the key from the device but instead return the key
that we have saved internally which is by default set to zero upon
allocation.

Fix:
This commit fixes the issue by initializing the key to a random value
using netdev_rss_key_fill().

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: add missing ethtool TX timestamping indication

[ Upstream commit cf6d17fde93bdda23c9b02dd5906a12bf8c55209 ]

Current implementation of the driver calls skb_tx_timestamp()to add a
software tx timestamp to the skb, however the software-transmit capability
is not reported in ethtool -T.

This commit updates the ethtool structure to report the software-transmit
capability in ethtool -T using the standard ethtool_op_get_ts_info().
This function reports all software timestamping capabilities (tx and rx),
as well as setting phc_index = -1. phc_index is the index of the PTP
hardware clock device that will be used for hardware timestamps. Since we
don't have such a device in ENA, using the default -1 value is the correct
setting.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Ezequiel Lara Gomez <ezegomez@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix uses of round_jiffies()

[ Upstream commit 2a6e5fa2f4c25b66c763428a3e65363214946931 ]

>From the documentation of round_jiffies():
"Rounds a time delta  in the future (in jiffies) up or down to
(approximately) full seconds. This is useful for timers for which
the exact time they fire does not matter too much, as long as
they fire approximately every X seconds.
By rounding these timers to whole seconds, all such timers will fire
at the same time, rather than at various times spread out. The goal
of this is to have the CPU wake up less, which saves power."

There are 2 parts to this patch:
================================
Part 1:
-------
In our case we need timer_service to be called approximately every
X=1 seconds, and the exact time does not matter, so using round_jiffies()
is the right way to go.

Therefore we add round_jiffies() to the mod_timer() in ena_timer_service().

Part 2:
-------
round_jiffies() is used in check_for_missing_keep_alive() when
getting the jiffies of the expiration of the keep_alive timeout. Here it
is actually a mistake to use round_jiffies() because we want the exact
time when keep_alive should expire and not an approximate rounded time,
which can cause early, false positive, timeouts.

Therefore we remove round_jiffies() in the calculation of
keep_alive_expired() in check_for_missing_keep_alive().

Fixes: 82ef30f13be0 ("net: ena: add hardware hints capability to the driver")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix potential crash when rxfh key is NULL

[ Upstream commit 91a65b7d3ed8450f31ab717a65dcb5f9ceb5ab02 ]

When ethtool -X is called without an hkey, ena_com_fill_hash_function()
is called with key=NULL, which is passed to memcpy causing a crash.

This commit fixes this issue by checking key is not NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix the conditional for i40e_vc_validate_vqs_bitmaps

[ Upstream commit f27f37a04a69890ac85d9155f03ee2d23b678d8f ]

Commit d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap
validation") introduced a necessary change for verifying how queue
bitmaps from the iavf driver get validated. Unfortunately, the
conditional was reversed. Fix this.

Fixes: d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: fuse: Fix build with Tegra194 configuration

[ Upstream commit 6f4ecbe284df5f22e386a640d9a4b32cede62030 ]

If only Tegra194 support is enabled, the tegra30_fuse_read() and
tegra30_fuse_init() function are not declared and cause a build failure.
Add Tegra194 to the preprocessor guard to make sure these functions are
available for Tegra194-only builds as well.

Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags

[ Upstream commit 416611d9b6eebaeae58ed26cc7d23131c69126b1 ]

On PowerPC, the compiler will tag object files with whether they
use hard or soft float FP ABI and whether they use 64 or 128-bit
long double ABI. On systems with 64-bit long double ABI, a tag
will get emitted whenever a double is used, as on those systems
a long double is the same as a double. This will prevent linkage
as other files are being compiled with hard-float.

On ppc64, this code will never actually get used for the time
being, as the only currently existing hardware using it are the
Renoir APUs. Therefore, until this is testable and can be fixed
properly, at least make sure the build will not fail.

Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add initialitions for PLL2 clock source

[ Upstream commit c134c3cabae46a56ab2e1f5e5fa49405e1758838 ]

[Why]
Starting from 14nm, the PLL is built into the PHY and the PLL is mapped
to PHY on 1 to 1 basis. In the code, the DP port is mapped to a PLL that was not
initialized. This causes DP to HDMI dongle to not light up the display.

[How]
Initializations added for PLL2 when creating resources.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Limit minimum DPPCLK to 100MHz.

[ Upstream commit 6c81917a0485ee2a1be0dc23321ac10ecfd9578b ]

[Why]
Underflow is observed when plug in a 4K@60 monitor with
1366x768 eDP due to DPPCLK is too low.

[How]
Limit minimum DPPCLK to 100MHz.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Check engine is not NULL before acquiring

[ Upstream commit 2b63d0ec0daf79ba503fa8bfa25e07dc3da274f3 ]

[Why]
Engine can be NULL in some cases, so we must not acquire it.

[How]
Check for NULL engine before acquiring.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[ Upstream commit 663218a3e715fd9339d143a3e10088316b180f4f ]

Warnings like below can fill up the dmesg while disconnecting RDMA
connections.
Hence, remove the unwanted WARN_ON.

  WARNING: CPU: 6 PID: 0 at drivers/infiniband/sw/siw/siw_cm.c:1229 siw_cm_llp_data_ready+0xc1/0xd0 [siw]
  RIP: 0010:siw_cm_llp_data_ready+0xc1/0xd0 [siw]
  Call Trace:
   <IRQ>
   tcp_data_queue+0x226/0xb40
   tcp_rcv_established+0x220/0x620
   tcp_v4_do_rcv+0x12a/0x1e0
   tcp_v4_rcv+0xb05/0xc00
   ip_local_deliver_finish+0x69/0x210
   ip_local_deliver+0x6b/0xe0
   ip_rcv+0x273/0x362
   __netif_receive_skb_core+0xb35/0xc30
   netif_receive_skb_internal+0x3d/0xb0
   napi_gro_frags+0x13b/0x200
   t4_ethrx_handler+0x433/0x7d0 [cxgb4]
   process_responses+0x318/0x580 [cxgb4]
   napi_rx_handler+0x14/0x100 [cxgb4]
   net_rx_action+0x149/0x3b0
   __do_softirq+0xe3/0x30a
   irq_exit+0x100/0x110
   do_IRQ+0x7f/0xe0
   common_interrupt+0xf/0xf
   </IRQ>

Link: https://lore.kernel.org/r/20200207141429.27927-1-krishna2@chelsio.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Do not set optimized_require to false after plane disable

[ Upstream commit df36f6cf23ada812930afa8ee76681d4ad307c61 ]

[WHY]
The optimized_require flag is needed to set watermarks and clocks lower
in certain conditions. This flag is set to true and then set to false
while programming front end in dcn20.

[HOW]
Do not set the flag to false while disabling plane.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi

[ Upstream commit f24667779b5348279e5e4328312a141a730a1fc7 ]

frame-inversion is "flag" not "uint32".
This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: do not execute direct write in parallel if O_APPEND is specified

[ Upstream commit 8e4473bb50a1796c9c32b244e5dbc5ee24ead937 ]

In O_APPEND & O_DIRECT mode, the data from different writers will
be possibly overlapping each other since they take the shared lock.

For example, both Writer1 and Writer2 are in O_APPEND and O_DIRECT
mode:

          Writer1                         Writer2

     shared_lock()                   shared_lock()
     getattr(CAP_SIZE)               getattr(CAP_SIZE)
     iocb->ki_pos = EOF              iocb->ki_pos = EOF
     write(data1)
                                     write(data2)
     shared_unlock()                 shared_unlock()

The data2 will overlap the data1 from the same file offset, the
old EOF.

Switch to exclusive lock instead when O_APPEND is specified.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/msr: Add Tremont support

[ Upstream commit 0aa0e0d6b34b89649e6b5882a7e025a0eb9bd832 ]

Tremont is Intel's successor to Goldmont Plus. SMI_COUNT MSR is also
supported.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/cstate: Add Tremont support

[ Upstream commit ecf71fbccb9ac5cb964eb7de59bb9da3755b7885 ]

Tremont is Intel's successor to Goldmont Plus. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Goldmont Plus and Goldmont.

Share glm_cstates with Goldmont Plus and Goldmont.
Update the comments for Tremont.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel: Add Elkhart Lake support

[ Upstream commit eda23b387f6c4bb2971ac7e874a09913f533b22c ]

Elkhart Lake also uses Tremont CPU. From the perspective of Intel PMU,
there is nothing changed compared with Jacobsville.
Share the perf code with Jacobsville.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/smmuv3: Use platform_get_irq_optional() for wired interrupt

[ Upstream commit 0ca2c0319a7bce0e152b51b866979d62dc261e48 ]

Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:

root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[   59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[   59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[   59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[   59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[   59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[   59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[   59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[   60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found

Use platform_get_irq_optional() to silence the warning.

If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix races between open and dentry revalidation

[ Upstream commit cf5b4059ba7197d6cef9c0e024979d178ed8c8ec ]

We want to make sure that we revalidate the dentry if and only if
we've done an OPEN by filename.
In order to avoid races with remote changes to the directory on the
server, we want to save the verifier before calling OPEN. The exception
is if the server returned a delegation with our OPEN, as we then
know that the filename can't have changed on the server.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Benjamin Coddington <bcodding@gmail.com>
Tested-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qmi_wwan: unconditionally reject 2 ep interfaces

[ Upstream commit 00516d13d4cfa56ce39da144db2dbf08b09b9357 ]

We have been using the fact that the QMI and DIAG functions
usually are the only ones with class/subclass/protocol being
ff/ff/ff on Quectel modems. This has allowed us to match the
QMI function without knowing the exact interface number,
which can vary depending on firmware configuration.

The ability to silently reject the DIAG function, which is
usually handled by the option driver, is important for this
method to work.  This is done based on the knowledge that it
has exactly 2 bulk endpoints.  QMI function control interfaces
will have either 3 or 1 endpoint. This rule is universal so
the quirk condition can be removed.

The fixed layouts known from the Gobi1k and Gobi2k modems
have been gradually replaced by more dynamic layouts, and
many vendors now use configurable layouts without changing
device IDs.  Renaming the class/subclass/protocol matching
macro makes it more obvious that this is now not Quectel
specific anymore.

Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qmi_wwan: re-add DW5821e pre-production variant

[ Upstream commit 88bf54603f6f2c137dfee1abf6436ceac3528d2d ]

Commit f25e1392fdb5 removed the support for the pre-production variant
of the Dell DW5821e to avoid probing another USB interface unnecessarily.
However, the pre-production samples are found in the wild, and this lack
of support is causing problems for users of such samples.  It is therefore
necessary to support both variants.

Matching on both interfaces 0 and 1 is not expected to cause any problem
with either variant, as only the QMI function will be probed successfully
on either.  Interface 1 will be rejected based on the HID class for the
production variant:

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

And interface 0 will be rejected based on too few endpoints for the
pre-production variant:

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev= 3.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware")
Link: https://whrl.pl/Rf0vNk
Reported-by: Lars Melin <larsm17@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: fix card and queue total counter wrap

[ Upstream commit fcd98d4002539f1e381916fc1b6648938c1eac76 ]

The internal statistic counters for the total number of
requests processed per card and per queue used integers. So they do
wrap after a rather huge amount of crypto requests processed. This
patch introduces uint64 counters which should hold much longer but
still may wrap. The sysfs attributes request_count for card and queue
also used only %ld and now display the counter value with %llu.

This is not a security relevant fix. The int overflow which happened
is not in any way exploitable as a security breach.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: check wiphy driver existence for drvinfo report

[ Upstream commit bfb7bac3a8f47100ebe7961bd14e924c96e21ca7 ]

When preparing ethtool drvinfo, check if wiphy driver is defined
before dereferencing it. Driver may not exist, e.g. if wiphy is
attached to a virtual platform device.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200203105644.28875-1-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: consider more elements in parsing CRC

[ Upstream commit a04564c99bb4a92f805a58e56b2d22cc4978f152 ]

We only use the parsing CRC for checking if a beacon changed,
and elements with an ID > 63 cannot be represented in the
filter. Thus, like we did before with WMM and Cisco vendor
elements, just statically add these forgotten items to the
CRC:
 - WLAN_EID_VHT_OPERATION
 - WLAN_EID_OPMODE_NOTIF

I guess that in most cases when VHT/HE operation change, the HT
operation also changed, and so the change was picked up, but we
did notice that pure operating mode notification changes were
ignored.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi
[restrict to VHT for the mac80211 branch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dax: pass NOWAIT flag to iomap_apply

[ Upstream commit 96222d53842dfe54869ec4e1b9d4856daf9105a2 ]

fstests generic/471 reports a failure when run with MOUNT_OPTIONS="-o
dax".  The reason is that the initial pwrite to an empty file with the
RWF_NOWAIT flag set does not return -EAGAIN.  It turns out that
dax_iomap_rw doesn't pass that flag through to iomap_apply.

With this patch applied, generic/471 passes for me.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/x49r1z86e1d.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Prevent unlimited runtime on throttled group

[ Upstream commit 2a4b03ffc69f2dedc6388e9a6438b5f4c133a40d ]

When a running task is moved on a throttled task group and there is no
other task enqueued on the CPU, the task can keep running using 100% CPU
whatever the allocated bandwidth for the group and although its cfs rq is
throttled. Furthermore, the group entity of the cfs_rq and its parents are
not enqueued but only set as curr on their respective cfs_rqs.

We have the following sequence:

sched_move_task
  -dequeue_task: dequeue task and group_entities.
  -put_prev_task: put task and group entities.
  -sched_change_group: move task to new group.
  -enqueue_task: enqueue only task but not group entities because cfs_rq is
    throttled.
  -set_next_task : set task and group_entities as current sched_entity of
    their cfs_rq.

Another impact is that the root cfs_rq runnable_load_avg at root rq stays
null because the group_entities are not enqueued. This situation will stay
the same until an "external" event triggers a reschedule. Let trigger it
immediately instead.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/1579011236-31256-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

timers/nohz: Update NOHZ load in remote tick

[ Upstream commit ebc0f83c78a2d26384401ecf2d2fa48063c0ee27 ]

The way loadavg is tracked during nohz only pays attention to the load
upon entering nohz.  This can be particularly noticeable if full nohz is
entered while non-idle, and then the cpu goes idle and stays that way for
a long time.

Use the remote tick to ensure that full nohz cpus report their deltas
within a reasonable time.

[ swood: Added changelog and removed recheck of stopped tick. ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1578736419-14628-3-git-send-email-swood@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Don't skip remote tick for idle CPUs

[ Upstream commit 488603b815a7514c7009e6fc339d74ed4a30f343 ]

This will be used in the next patch to get a loadavg update from
nohz cpus.  The delta check is skipped because idle_sched_class
doesn't update se.exec_start.

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1578736419-14628-2-git-send-email-swood@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Set dma maximum segment size for mdss

[ Upstream commit db735fc4036bbe1fbe606819b5f0ff26cc76cdff ]

Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:

[   12.078665] msm ae00000.mdss: DMA-API: mapping sg segment longer than device claims to support [len=3526656] [max=65536]
[   12.089870] WARNING: CPU: 6 PID: 334 at /mnt/host/source/src/third_party/kernel/v4.19/kernel/dma/debug.c:1301 debug_dma_map_sg+0x1dc/0x318
[   12.102655] Modules linked in: joydev
[   12.106442] CPU: 6 PID: 334 Comm: frecon Not tainted 4.19.0 #2
[   12.112450] Hardware name: Google Cheza (rev3+) (DT)
[   12.117566] pstate: 60400009 (nZCv daif +PAN -UAO)
[   12.122506] pc : debug_dma_map_sg+0x1dc/0x318
[   12.126995] lr : debug_dma_map_sg+0x1dc/0x318
[   12.131487] sp : ffffff800cc3ba80
[   12.134913] x29: ffffff800cc3ba80 x28: 0000000000000000
[   12.140395] x27: 0000000000000004 x26: 0000000000000004
[   12.145868] x25: ffffff8008e55b18 x24: 0000000000000000
[   12.151337] x23: 00000000ffffffff x22: ffffff800921c000
[   12.156809] x21: ffffffc0fa75b080 x20: ffffffc0f7195090
[   12.162280] x19: ffffffc0f1c53280 x18: 0000000000000000
[   12.167749] x17: 0000000000000000 x16: 0000000000000000
[   12.173218] x15: 0000000000000000 x14: 0720072007200720
[   12.178689] x13: 0720072007200720 x12: 0720072007200720
[   12.184161] x11: 0720072007200720 x10: 0720072007200720
[   12.189641] x9 : ffffffc0f1fc6b60 x8 : 0000000000000000
[   12.195110] x7 : ffffff8008132ce0 x6 : 0000000000000000
[   12.200585] x5 : 0000000000000000 x4 : ffffff8008134734
[   12.206058] x3 : ffffff800cc3b830 x2 : ffffffc0f1fc6240
[   12.211532] x1 : 25045a74f48a7400 x0 : 25045a74f48a7400
[   12.217006] Call trace:
[   12.219535]  debug_dma_map_sg+0x1dc/0x318
[   12.223671]  get_pages+0x19c/0x20c
[   12.227177]  msm_gem_fault+0x64/0xfc
[   12.230874]  __do_fault+0x3c/0x140
[   12.234383]  __handle_mm_fault+0x70c/0xdb8
[   12.238603]  handle_mm_fault+0xac/0xc4
[   12.242473]  do_page_fault+0x1bc/0x3d4
[   12.246342]  do_translation_fault+0x54/0x88
[   12.250652]  do_mem_abort+0x60/0xf0
[   12.254250]  el0_da+0x20/0x24
[   12.257317] irq event stamp: 67260
[   12.260828] hardirqs last  enabled at (67259): [<ffffff8008132d0c>] console_unlock+0x214/0x608
[   12.269693] hardirqs last disabled at (67260): [<ffffff8008080e0c>] do_debug_exception+0x5c/0x178
[   12.278820] softirqs last  enabled at (67256): [<ffffff8008081664>] __do_softirq+0x4d4/0x520
[   12.287510] softirqs last disabled at (67249): [<ffffff80080be574>] irq_exit+0xa8/0x100
[   12.295742] ---[ end trace e63cfc40c313ffab ]---

The root of the problem is that the default segment size for sgt is
(UINT_MAX & PAGE_MASK), and the default segment size for device dma is
64K. As such, if you compare the 2, you would deduce that the sg segment
will overflow the device's capacity. In reality, the hardware can
accommodate the larger sg segments, it's just not initializing its max
segment properly. This patch initializes the max segment size for the
mdss device, which gets rid of that pesky warning.

Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Handle a possible NULL pointer reference

[ Upstream commit 6b8526d3abc02c08a2f888e8c20b7ac9e5776dfe ]

In error cases a NULL can be passed to memcpy.  The length will always
be zero, so it doesn't really matter, but go ahead and check for NULL,
anyway, to be more precise and avoid static analysis errors.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Fix nlmsg_flags when splitting a multipath route

[ Upstream commit afecdb376bd81d7e16578f0cfe82a1aec7ae18f3 ]

When splitting an RTA_MULTIPATH request into multiple routes and adding the
second and later components, we must not simply remove NLM_F_REPLACE but
instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink
message was malformed.

For example,
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \
nexthop via fe80::30:2 dev dummy0
results in the following warnings:
[ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE
[ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route

This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to
what it would get if the multipath route had been added in multiple netlink
operations:
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0
ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix route replacement with dev-only route

[ Upstream commit e404b8c7cfb31654c9024d497cec58a501501692 ]

After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.

Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.

We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: fix lockdep warning in bond_get_stats()

[ Upstream commit b3e80d44f5b1b470dd9e2dbc6816e63a5c519709 ]

In the "struct bonding", there is stats_lock.
This lock protects "bond_stats" in the "struct bonding".
bond_stats is updated in the bond_get_stats() and this function would be
executed concurrently. So, the lock is needed.

Bonding interfaces would be nested.
So, either stats_lock should use dynamic lockdep class key or stats_lock
should be used by spin_lock_nested(). In the current code, stats_lock is
using a dynamic lockdep class key.
But there is no updating stats_lock_key routine So, lockdep warning
will occur.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond0 master bond1
    ip link set bond0 nomaster
    ip link set bond1 master bond0

Splat looks like:
[   38.420603][  T957] 5.5.0+ #394 Not tainted
[   38.421074][  T957] ------------------------------------------------------
[   38.421837][  T957] ip/957 is trying to acquire lock:
[   38.422399][  T957] ffff888063262cd8 (&bond->stats_lock_key#2){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[   38.423528][  T957]
[   38.423528][  T957] but task is already holding lock:
[   38.424526][  T957] ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[   38.426075][  T957]
[   38.426075][  T957] which lock already depends on the new lock.
[   38.426075][  T957]
[   38.428536][  T957]
[   38.428536][  T957] the existing dependency chain (in reverse order) is:
[   38.429475][  T957]
[   38.429475][  T957] -> #1 (&bond->stats_lock_key){+.+.}:
[   38.430273][  T957]        _raw_spin_lock+0x30/0x70
[   38.430812][  T957]        bond_get_stats+0x90/0x4d0 [bonding]
[   38.431451][  T957]        dev_get_stats+0x1ec/0x270
[   38.432088][  T957]        bond_get_stats+0x1a5/0x4d0 [bonding]
[   38.432767][  T957]        dev_get_stats+0x1ec/0x270
[   38.433322][  T957]        rtnl_fill_stats+0x44/0xbe0
[   38.433866][  T957]        rtnl_fill_ifinfo+0xeb2/0x3720
[   38.434474][  T957]        rtmsg_ifinfo_build_skb+0xca/0x170
[   38.435081][  T957]        rtmsg_ifinfo_event.part.33+0x1b/0xb0
[   38.436848][  T957]        rtnetlink_event+0xcd/0x120
[   38.437455][  T957]        notifier_call_chain+0x90/0x160
[   38.438067][  T957]        netdev_change_features+0x74/0xa0
[   38.438708][  T957]        bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[   38.439522][  T957]        bond_enslave+0x3639/0x47b0 [bonding]
[   38.440225][  T957]        do_setlink+0xaab/0x2ef0
[   38.440786][  T957]        __rtnl_newlink+0x9c5/0x1270
[   38.441463][  T957]        rtnl_newlink+0x65/0x90
[   38.442075][  T957]        rtnetlink_rcv_msg+0x4a8/0x890
[   38.442774][  T957]        netlink_rcv_skb+0x121/0x350
[   38.443451][  T957]        netlink_unicast+0x42e/0x610
[   38.444282][  T957]        netlink_sendmsg+0x65a/0xb90
[   38.444992][  T957]        ____sys_sendmsg+0x5ce/0x7a0
[   38.445679][  T957]        ___sys_sendmsg+0x10f/0x1b0
[   38.446365][  T957]        __sys_sendmsg+0xc6/0x150
[   38.447007][  T957]        do_syscall_64+0x99/0x4f0
[   38.447668][  T957]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   38.448538][  T957]
[   38.448538][  T957] -> #0 (&bond->stats_lock_key#2){+.+.}:
[   38.449554][  T957]        __lock_acquire+0x2d8d/0x3de0
[   38.450148][  T957]        lock_acquire+0x164/0x3b0
[   38.450711][  T957]        _raw_spin_lock+0x30/0x70
[   38.451292][  T957]        bond_get_stats+0x90/0x4d0 [bonding]
[   38.451950][  T957]        dev_get_stats+0x1ec/0x270
[   38.452425][  T957]        bond_get_stats+0x1a5/0x4d0 [bonding]
[   38.453362][  T957]        dev_get_stats+0x1ec/0x270
[   38.453825][  T957]        rtnl_fill_stats+0x44/0xbe0
[   38.454390][  T957]        rtnl_fill_ifinfo+0xeb2/0x3720
[   38.456257][  T957]        rtmsg_ifinfo_build_skb+0xca/0x170
[   38.456998][  T957]        rtmsg_ifinfo_event.part.33+0x1b/0xb0
[   38.459351][  T957]        rtnetlink_event+0xcd/0x120
[   38.460086][  T957]        notifier_call_chain+0x90/0x160
[   38.460829][  T957]        netdev_change_features+0x74/0xa0
[   38.461752][  T957]        bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[   38.462705][  T957]        bond_enslave+0x3639/0x47b0 [bonding]
[   38.463476][  T957]        do_setlink+0xaab/0x2ef0
[   38.464141][  T957]        __rtnl_newlink+0x9c5/0x1270
[   38.464897][  T957]        rtnl_newlink+0x65/0x90
[   38.465522][  T957]        rtnetlink_rcv_msg+0x4a8/0x890
[   38.466215][  T957]        netlink_rcv_skb+0x121/0x350
[   38.466895][  T957]        netlink_unicast+0x42e/0x610
[   38.467583][  T957]        netlink_sendmsg+0x65a/0xb90
[   38.468285][  T957]        ____sys_sendmsg+0x5ce/0x7a0
[   38.469202][  T957]        ___sys_sendmsg+0x10f/0x1b0
[   38.469884][  T957]        __sys_sendmsg+0xc6/0x150
[   38.470587][  T957]        do_syscall_64+0x99/0x4f0
[   38.471245][  T957]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   38.472093][  T957]
[   38.472093][  T957] other info that might help us debug this:
[   38.472093][  T957]
[   38.473438][  T957]  Possible unsafe locking scenario:
[   38.473438][  T957]
[   38.474898][  T957]        CPU0                    CPU1
[   38.476234][  T957]        ----                    ----
[   38.480171][  T957]   lock(&bond->stats_lock_key);
[   38.480808][  T957]                                lock(&bond->stats_lock_key#2);
[   38.481791][  T957]                                lock(&bond->stats_lock_key);
[   38.482754][  T957]   lock(&bond->stats_lock_key#2);
[   38.483416][  T957]
[   38.483416][  T957]  *** DEADLOCK ***
[   38.483416][  T957]
[   38.484505][  T957] 3 locks held by ip/957:
[   38.485048][  T957]  #0: ffffffffbccf6230 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890
[   38.486198][  T957]  #1: ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[   38.487625][  T957]  #2: ffffffffbc9254c0 (rcu_read_lock){....}, at: bond_get_stats+0x5/0x4d0 [bonding]
[   38.488897][  T957]
[   38.488897][  T957] stack backtrace:
[   38.489646][  T957] CPU: 1 PID: 957 Comm: ip Not tainted 5.5.0+ #394
[   38.490497][  T957] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   38.492810][  T957] Call Trace:
[   38.493219][  T957]  dump_stack+0x96/0xdb
[   38.493709][  T957]  check_noncircular+0x371/0x450
[   38.494344][  T957]  ? lookup_address+0x60/0x60
[   38.494923][  T957]  ? print_circular_bug.isra.35+0x310/0x310
[   38.495699][  T957]  ? hlock_class+0x130/0x130
[   38.496334][  T957]  ? __lock_acquire+0x2d8d/0x3de0
[   38.496979][  T957]  __lock_acquire+0x2d8d/0x3de0
[   38.497607][  T957]  ? register_lock_class+0x14d0/0x14d0
[   38.498333][  T957]  ? check_chain_key+0x236/0x5d0
[   38.499003][  T957]  lock_acquire+0x164/0x3b0
[   38.499800][  T957]  ? bond_get_stats+0x90/0x4d0 [bonding]
[   38.500706][  T957]  _raw_spin_lock+0x30/0x70
[   38.501435][  T957]  ? bond_get_stats+0x90/0x4d0 [bonding]
[   38.502311][  T957]  bond_get_stats+0x90/0x4d0 [bonding]
[ ... ]

But, there is another problem.
The dynamic lockdep class key is protected by RTNL, but bond_get_stats()
would be called outside of RTNL.
So, it would use an invalid dynamic lockdep class key.

In order to fix this issue, stats_lock uses spin_lock_nested() instead of
a dynamic lockdep key.
The bond_get_stats() calls bond_get_lowest_level_rcu() to get the correct
nest level value, which will be used by spin_lock_nested().
The "dev->lower_level" indicates lower nest level value, but this value
is invalid outside of RTNL.
So, bond_get_lowest_level_rcu() returns valid lower nest level value in
the RCU critical section.
bond_get_lowest_level_rcu() will be work only when LOCKDEP is enabled.

Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: export netdev_next_lower_dev_rcu()

[ Upstream commit 7151affeef8d527f50b4b68a871fd28bd660023f ]

netdev_next_lower_dev_rcu() will be used to implement a function,
which is to walk all lower interfaces.
There are already functions that they walk their lower interface.
(netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()).
But, there would be cases that couldn't be covered by given
netdev_walk_all_lower_dev_{rcu}() function.
So, some modules would want to implement own function,
which is to walk all lower interfaces.

In the next patch, netdev_next_lower_dev_rcu() will be used.
In addition, this patch removes two unused prototypes in netdevice.h.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: add missing netdev_update_lockdep_key()

[ Upstream commit 064ff66e2bef84f1153087612032b5b9eab005bd ]

After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ifenslave bond0 bond1
    ifenslave -d bond0 bond1
    ifenslave bond1 bond0

Splat looks like:
[   29.501182][ T1046] WARNING: possible circular locking dependency detected
[   29.501945][ T1039] hardirqs last disabled at (1962): [<ffffffffac6c807f>] handle_mm_fault+0x13f/0x700
[   29.503442][ T1046] 5.5.0+ #322 Not tainted
[   29.503447][ T1046] ------------------------------------------------------
[   29.504277][ T1039] softirqs last  enabled at (1180): [<ffffffffade00678>] __do_softirq+0x678/0x981
[   29.505443][ T1046] ifenslave/1046 is trying to acquire lock:
[   29.505886][ T1039] softirqs last disabled at (1169): [<ffffffffac19c18a>] irq_exit+0x17a/0x1a0
[   29.509997][ T1046] ffff88805d5da280 (&dev->addr_list_lock_key#3){+...}, at: dev_mc_sync_multiple+0x95/0x120
[   29.511243][ T1046]
[   29.511243][ T1046] but task is already holding lock:
[   29.512192][ T1046] ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[   29.514124][ T1046]
[   29.514124][ T1046] which lock already depends on the new lock.
[   29.514124][ T1046]
[   29.517297][ T1046]
[   29.517297][ T1046] the existing dependency chain (in reverse order) is:
[   29.518231][ T1046]
[   29.518231][ T1046] -> #1 (&dev->addr_list_lock_key#4){+...}:
[   29.519076][ T1046]        _raw_spin_lock+0x30/0x70
[   29.519588][ T1046]        dev_mc_sync_multiple+0x95/0x120
[   29.520208][ T1046]        bond_enslave+0x448d/0x47b0 [bonding]
[   29.520862][ T1046]        bond_option_slaves_set+0x1a3/0x370 [bonding]
[   29.521640][ T1046]        __bond_opt_set+0x1ff/0xbb0 [bonding]
[   29.522438][ T1046]        __bond_opt_set_notify+0x2b/0xf0 [bonding]
[   29.523251][ T1046]        bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[   29.524082][ T1046]        bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[   29.524959][ T1046]        kernfs_fop_write+0x276/0x410
[   29.525620][ T1046]        vfs_write+0x197/0x4a0
[   29.526218][ T1046]        ksys_write+0x141/0x1d0
[   29.526818][ T1046]        do_syscall_64+0x99/0x4f0
[   29.527430][ T1046]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   29.528265][ T1046]
[   29.528265][ T1046] -> #0 (&dev->addr_list_lock_key#3){+...}:
[   29.529272][ T1046]        __lock_acquire+0x2d8d/0x3de0
[   29.529935][ T1046]        lock_acquire+0x164/0x3b0
[   29.530638][ T1046]        _raw_spin_lock+0x30/0x70
[   29.531187][ T1046]        dev_mc_sync_multiple+0x95/0x120
[   29.531790][ T1046]        bond_enslave+0x448d/0x47b0 [bonding]
[   29.532451][ T1046]        bond_option_slaves_set+0x1a3/0x370 [bonding]
[   29.533163][ T1046]        __bond_opt_set+0x1ff/0xbb0 [bonding]
[   29.533789][ T1046]        __bond_opt_set_notify+0x2b/0xf0 [bonding]
[   29.534595][ T1046]        bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[   29.535500][ T1046]        bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[   29.536379][ T1046]        kernfs_fop_write+0x276/0x410
[   29.537057][ T1046]        vfs_write+0x197/0x4a0
[   29.537640][ T1046]        ksys_write+0x141/0x1d0
[   29.538251][ T1046]        do_syscall_64+0x99/0x4f0
[   29.538870][ T1046]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   29.539659][ T1046]
[   29.539659][ T1046] other info that might help us debug this:
[   29.539659][ T1046]
[   29.540953][ T1046]  Possible unsafe locking scenario:
[   29.540953][ T1046]
[   29.541883][ T1046]        CPU0                    CPU1
[   29.542540][ T1046]        ----                    ----
[   29.543209][ T1046]   lock(&dev->addr_list_lock_key#4);
[   29.543880][ T1046]                                lock(&dev->addr_list_lock_key#3);
[   29.544873][ T1046]                                lock(&dev->addr_list_lock_key#4);
[   29.545863][ T1046]   lock(&dev->addr_list_lock_key#3);
[   29.546525][ T1046]
[   29.546525][ T1046]  *** DEADLOCK ***
[   29.546525][ T1046]
[   29.547542][ T1046] 5 locks held by ifenslave/1046:
[   29.548196][ T1046]  #0: ffff88806044c478 (sb_writers#5){.+.+}, at: vfs_write+0x3bb/0x4a0
[   29.549248][ T1046]  #1: ffff88805af00890 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cf/0x410
[   29.550343][ T1046]  #2: ffff88805b8b54b0 (kn->count#157){.+.+}, at: kernfs_fop_write+0x1f2/0x410
[   29.551575][ T1046]  #3: ffffffffaecf4cf0 (rtnl_mutex){+.+.}, at: bond_opt_tryset_rtnl+0x5f/0xf0 [bonding]
[   29.552819][ T1046]  #4: ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[   29.554175][ T1046]
[   29.554175][ T1046] stack backtrace:
[   29.554907][ T1046] CPU: 0 PID: 1046 Comm: ifenslave Not tainted 5.5.0+ #322
[   29.555854][ T1046] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   29.557064][ T1046] Call Trace:
[   29.557504][ T1046]  dump_stack+0x96/0xdb
[   29.558054][ T1046]  check_noncircular+0x371/0x450
[   29.558723][ T1046]  ? print_circular_bug.isra.35+0x310/0x310
[   29.559486][ T1046]  ? hlock_class+0x130/0x130
[   29.560100][ T1046]  ? __lock_acquire+0x2d8d/0x3de0
[   29.560761][ T1046]  __lock_acquire+0x2d8d/0x3de0
[   29.561366][ T1046]  ? register_lock_class+0x14d0/0x14d0
[   29.562045][ T1046]  ? find_held_lock+0x39/0x1d0
[   29.562641][ T1046]  lock_acquire+0x164/0x3b0
[   29.563199][ T1046]  ? dev_mc_sync_multiple+0x95/0x120
[   29.563872][ T1046]  _raw_spin_lock+0x30/0x70
[   29.564464][ T1046]  ? dev_mc_sync_multiple+0x95/0x120
[   29.565146][ T1046]  dev_mc_sync_multiple+0x95/0x120
[   29.565793][ T1046]  bond_enslave+0x448d/0x47b0 [bonding]
[   29.566487][ T1046]  ? bond_update_slave_arr+0x940/0x940 [bonding]
[   29.567279][ T1046]  ? bstr_printf+0xc20/0xc20
[   29.567857][ T1046]  ? stack_trace_consume_entry+0x160/0x160
[   29.568614][ T1046]  ? deactivate_slab.isra.77+0x2c5/0x800
[   29.569320][ T1046]  ? check_chain_key+0x236/0x5d0
[   29.569939][ T1046]  ? sscanf+0x93/0xc0
[   29.570442][ T1046]  ? vsscanf+0x1e20/0x1e20
[   29.571003][ T1046]  bond_option_slaves_set+0x1a3/0x370 [bonding]
[ ... ]

Fixes: ab92d68fc22f ("net: core: add generic lockdep keys")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.

[ Upstream commit 8743db4a9acfd51f805ac0c87bcaae92c42d1061 ]

If crashed kernel does not shutdown the NIC properly, PCIe FLR
is required in the kdump kernel in order to initialize all the
functions properly.

Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Improve device shutdown method.

[ Upstream commit 5567ae4a8d569d996d0d88d0eceb76205e4c7ce5 ]

Especially when bnxt_shutdown() is called during kexec, we need to
disable MSIX and disable Bus Master to completely quiesce the device.
Make these 2 calls unconditionally in the shutdown method.

Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: move the format error check out of __sctp_sf_do_9_1_abort

[ Upstream commit 245709ec8be89af46ea7ef0444c9c80913999d99 ]

When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.

However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.

This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.

Thanks Hangbin for reporting this issue by the fuzz testing.

v1->v2:
  - improve the comment in the code as Marcelo's suggestion.

Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: rehash on disconnect

[ Upstream commit 303d0403b8c25e994e4a6e45389e173cf8706fb5 ]

As of the below commit, udp sockets bound to a specific address can
coexist with one bound to the any addr for the same port.

The commit also phased out the use of socket hashing based only on
port (hslot), in favor of always hashing on {addr, port} (hslot2).

The change broke the following behavior with disconnect (AF_UNSPEC):

    server binds to 0.0.0.0:1337
    server connects to 127.0.0.1:80
    server disconnects
    client connects to 127.0.0.1:1337
    client sends "hello"
    server reads "hello" // times out, packet did not find sk

On connect the server acquires a specific source addr suitable for
routing to its destination. On disconnect it reverts to the any addr.

The connect call triggers a rehash to a different hslot2. On
disconnect, add the same to return to the original hslot2.

Skip this step if the socket is going to be unhashed completely.

Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address")
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: dev: introduce support for sch BYPASS for lockless qdisc"

[ Upstream commit 379349e9bc3b42b8b2f8f7a03f64a97623fff323 ]

This reverts commit ba27b4cdaaa66561aaedb2101876e563738d36fe

Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.

This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.

Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: Fix race between rdma destroy workqueue and link change event

[ Upstream commit af6565adb02d3129d3fae4d9d5da945abaf4417a ]

If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.

A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.

Fixes: cee9fbd8e2e ("qede: Add qedr framework")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: pn544: Fix occasional HW initialization failure

[ Upstream commit c3331d2fe3fd4d5e321f2467d01f72de7edfb5d0 ]

The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:

  pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
  pn544_hci_i2c 1-002a: NFC: invalid len byte
  shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead

This patch fixes the occasional NFC initialization failure on Nexus 7
device.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: Fix to avoid gettig invalid tls record

[ Upstream commit 06f5201c6392f998a49ca9c9173e2930c8eb51d8 ]

Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: correct flower port blocking

[ Upstream commit 8a9093c79863b58cc2f9874d7ae788f0d622a596 ]

tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.

Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.

Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: restore mdio regs in the iproc mdio driver

commit 6f08e98d62799e53c89dbf2c9a49d77e20ca648c upstream.

The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend.
Save and restore value of register while resuming from suspend.

Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mscc: fix in frame extraction

[ Upstream commit a81541041ceb55bcec9a8bb8ad3482263f0a205a ]

Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.

In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.

The fix consist in resetting the error after reading the IFH.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macb: ensure interface is not suspended on at91rm9200

[ Upstream commit e6a41c23df0d5da01540d2abef41591589c0b4be ]

Because of autosuspend, at91ether_start is called with clocks disabled.
Ensure that pm_runtime doesn't suspend the interface as soon as it is
opened as there is no pm_runtime support is the other relevant parts of the
platform support for at91rm9200.

Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fib_rules: Correctly set table field when table number exceeds 8 bits

[ Upstream commit 540e585a79e9d643ede077b73bcc7aa2d7b4d919 ]

In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to
allow legacy software to deal with routing table numbers >= 256, but the
same change to FIB rule queries was overlooked.

Signed-off-by: Jethro Beekman <jethro@fortanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: Ensure the default VID is untagged

[ Upstream commit d965a5432d4c3e6b9c3d2bc1d4a800013bbf76f6 ]

We need to ensure that the default VID is untagged otherwise the switch
will be sending tagged frames and the results can be problematic. This
is especially true with b53 switches that use VID 0 as their default
VLAN since VID 0 has a special meaning.

Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID")
Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC: skx_common: downgrade message importance on missing PCI device

[ Upstream commit 854bb48018d5da261d438b2232fa683bdb553979 ]

Both skx_edac and i10nm_edac drivers are loaded based on the matching CPU being
available which leads the module to be automatically loaded in virtual machines
as well. That will fail due the missing PCI devices. In both drivers the first
function to make use of the PCI devices is skx_get_hi_lo() will simply print

EDAC skx: Can't get tolm/tohm

for each CPU core, which is noisy. This patch makes it a debug message.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20191204212325.c4k47p5hrnn3vpb5@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: grab ->fs as part of async offload

[ Upstream commits 9392a27d88b9 and ff002b30181d ]

Ensure that the async work grabs ->fs from the queueing task if the
punted commands needs to do lookups.

We don't have these two commits in 5.4-stable:

ff002b30181d30cdfbca316dadd099c3ca0d739c
9392a27d88b9707145d713654eb26f0c29789e50

because they don't apply with the rework that was done in how io_uring
handles offload. Since there's no io-wq in 5.4, it doesn't make sense to
do two patches. I'm attaching my port of the two for 5.4-stable, it's
been tested. Please queue it up for the next 5.4-stable, thanks!

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.4.23

ASoC: SOF: Intel: hda: Add iDisp4 DAI

commit e68d6696575e1af3f92125e842f2853708f34589 upstream.

TGL supports more than three iDisp DAI's.
Add support for iDisp4 CPU DAI.

Without this patch, we saw the below error on our TGL DUT:
   sof_rt5682 tgl_max98357a_rt5682: ASoC: CPU DAI iDisp4 Pin not registered

Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191220171037.10689-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Selftests build error in sockmap_basic.c

commit f2e97dc126b712c0d21219ed0c42710006c1cf52 upstream.

Fix following build error. We could push a tcp.h header into one of the
include paths, but I think its easy enough to simply pull in the three
defines we need here. If we end up using more of tcp.h at some point
we can pull it in later.

/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’:
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function)
  repair = TCP_REPAIR_ON;
           ^
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function)
  repair = TCP_REPAIR_OFF_NO_WP;

Then with fix,

$ ./test_progs -n 44
#44/1 sockmap create_update_free:OK
#44/2 sockhash create_update_free:OK
#44 sockmap_basic:OK

Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range

commit 380324734956c64cd060e1db4304f3117ac15809 upstream.

Clang warns:

 In file included from ../arch/s390/purgatory/purgatory.c:10:
 In file included from ../include/linux/kexec.h:18:
 In file included from ../include/linux/crash_core.h:6:
 In file included from ../include/linux/elfcore.h:5:
 In file included from ../include/linux/user.h:1:
 In file included from ../arch/s390/include/asm/user.h:11:
 ../arch/s390/include/asm/page.h:45:6: warning: converting the result of
 '<<' to a boolean always evaluates to false
 [-Wtautological-constant-compare]
         if (PAGE_DEFAULT_KEY)
            ^
 ../arch/s390/include/asm/page.h:23:44: note: expanded from macro
 'PAGE_DEFAULT_KEY'
 #define PAGE_DEFAULT_KEY        (PAGE_DEFAULT_ACC << 4)
                                                  ^
 1 warning generated.

Explicitly compare this against zero to silence the warning as it is
intended to be used in a boolean context.

Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0")
Link: https://github.com/ClangBuiltLinux/linux/issues/860
Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kaslr: Fix casts in get_random

commit 788d671517b5c81efbed9310ccbadb8cca86a08e upstream.

Clang warns:

../arch/s390/boot/kaslr.c:78:25: warning: passing 'char *' to parameter
of type 'const u8 *' (aka 'const unsigned char *') converts between
pointers to integer
types with different sign [-Wpointer-sign]
                                  (char *) entropy, (char *) entropy,
                                                    ^~~~~~~~~~~~~~~~
../arch/s390/include/asm/cpacf.h:280:28: note: passing argument to
parameter 'src' here
                            u8 *dest, const u8 *src, long src_len)
                                                ^
2 warnings generated.

Fix the cast to match what else is done in this function.

Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Link: https://github.com/ClangBuiltLinux/linux/issues/862
Link: https://lkml.kernel.org/r/20200208141052.48476-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix crash in recovery flow without devlink reporter

commit 1ad6c43c6a7b8627240c6cc19c69e31fedc596a7 upstream.

When health reporters are not supported, recovery function is invoked
directly, not via devlink health reporters.

In this direct flow, the recover function input parameter was passed
incorrectly and is causing a kernel oops. This patch is fixing the input
parameter.

Following call trace is observed on rx error health reporting.

Internal error: Oops: 96000007 [#1] PREEMPT SMP
Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703)
Call trace:
mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core]
mlx5e_health_report+0x60/0x6c [mlx5_core]
mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core]
mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core]
process_one_work+0x168/0x3d0
worker_thread+0x58/0x3d0
kthread+0x108/0x134

Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa

commit 3d9c5e023a0dbf3e117bb416cfefd9405bf5af0c upstream.

rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa
cannot take mutex lock. Two possible issues can happen:
1. User at the same time change vepa mode via RTM_SETLINK command.
2. User at the same time change the switchdev mode via devlink netlink
interface.

Case 1 cannot happen because rtnl executes one message in order.
Case 2 can happen but we do not expect user to change the switchdev mode
when changing vepa. Even if a user does it, so he will read a value
which is no longer valid.

Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY

commit 5ee090ed0da649b1febae2b7c285ac77d1e55a0c upstream.

Initialize RQ doorbell counters to zero prior to moving an RQ from RST
to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor
ID on the completion is reset. The doorbell record must comply.

Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: Enable interrupts when calling _cond_resched()

commit 8645e56a4ad6dcbf504872db7f14a2f67db88ef2 upstream.

xen_maybe_preempt_hcall() is called from the exception entry point
xen_do_hypervisor_callback with interrupts disabled.

_cond_resched() evades the might_sleep() check in cond_resched() which
would have caught that and schedule_debug() unfortunately lacks a check
for irqs_disabled().

Enable interrupts around the call and use cond_resched() to catch future
issues.

Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci: Add shutdown to freeze hardware resources of ahci

commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream.

device_shutdown() called from reboot or power_shutdown expect
all devices to be shutdown. Same is true for even ahci pci driver.
As no ahci shutdown function is implemented, the ata subsystem
always remains alive with DMA & interrupt support. File system
related calls should not be honored after device_shutdown().

So defining ahci pci driver shutdown to freeze hardware (mask
interrupt, stop DMA engine and free DMA resources).

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: prevent sq_thread from spinning when it should stop

commit 7143b5ac5750f404ff3a594b34fdf3fc2f99f828 upstream.

This patch drops 'cur_mm' before calling cond_resched(), to prevent
the sq_thread from spinning even when the user process is finished.

Before this patch, if the user process ended without closing the
io_uring fd, the sq_thread continues to spin until the
'sq_thread_idle' timeout ends.

In the worst case where the 'sq_thread_idle' parameter is bigger than
INT_MAX, the sq_thread will spin forever.

Fixes: 6c271ce2f1d5 ("io_uring: add submission polling")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix call RCU cleanup using non-bh-safe locks

commit 963485d436ccc2810177a7b08af22336ec2af67b upstream.

rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock.  RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.

To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred.  This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.

Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.

Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.

Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.

Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept")
Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com
Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_hashlimit: limit the max size of hashtable

commit 8d0015a7ab76b8b1e89a3e5f5710a6e5103f2dd5 upstream.

The user-specified hashtable size is unbound, this could
easily lead to an OOM or a hung task as we hold the global
mutex while allocating and initializing the new hashtable.

Add a max value to cap both cfg->size and cfg->max, as
suggested by Florian.

Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix concurrent access to queue current tick/time

commit dc7497795e014d84699c3b8809ed6df35352dd74 upstream.

snd_seq_check_queue() passes the current tick and time of the given
queue as a pointer to snd_seq_prioq_cell_out(), but those might be
updated concurrently by the seq timer update.

Fix it by retrieving the current tick and time via the proper helper
functions at first, and pass those values to snd_seq_prioq_cell_out()
later in the loops.

snd_seq_timer_get_cur_time() takes a new argument and adjusts with the
current system time only when it's requested so; this update isn't
needed for snd_seq_check_queue(), as it's called either from the
interrupt handler or right after queuing.

Also, snd_seq_timer_get_cur_tick() is changed to read the value in the
spinlock for the concurrency, too.

Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Avoid concurrent access to queue flags

commit bb51e669fa49feb5904f452b2991b240ef31bc97 upstream.

The queue flags are represented in bit fields and the concurrent
access may result in unexpected results.  Although the current code
should be mostly OK as it's only reading a field while writing other
fields as KCSAN reported, it's safer to cover both with a proper
spinlock protection.

This patch fixes the possible concurrent read by protecting with
q->owner_lock.  Also the queue owner field is protected as well since
it's the field to be protected by the lock itself.

Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com
Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Avoid bit fields for state flags

commit dfa9a5efe8b932a84b3b319250aa3ac60c20f876 upstream.

The rawmidi state flags (opened, append, active_sensing) are stored in
bit fields that can be potentially racy when concurrently accessed
without any locks.  Although the current code should be fine, there is
also no any real benefit by keeping the bitfields for this kind of
short number of members.

This patch changes those bit fields flags to the simple bool fields.
There should be no size increase of the snd_rawmidi_substream by this
change.

Reported-by: syzbot+576cc007eb9f2c968200@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200214111316.26939-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>