* elflink.c (bfd_elf_discard_info): Look for next .eh_frame if
first one is zero size or discarded.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Set most of
glink_eh_frame contents here..
(ppc_elf_finish_dynamic_sections): ..rather than here.  Just set
offset to .glink.

Create PLT eh_frame section if there is .eh_frame section

bfd/

PR ld/13909
* elf32-i386.c (elf_i386_create_dynamic_sections): Create PLT
eh_frame section if there is an input .eh_frame section.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Likewise.

ld/testsuite/

PR ld/13909
* ld-i386/i386.exp: Run pr13909.
* ld-x86-64/x86-64.exp: Likewise.

* ld-i386/dummy.s: New file.
* ld-i386/pr13909.d: Likewise.
* ld-x86-64/pr13909.d: Likewise.

Always create PLT eh_frame section for i386/x86-64

bfd/

2012-05-22  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/14105
* elf32-i386.c (elf_i386_create_dynamic_sections): Always
create PLT eh_frame section with SEC_LINKER_CREATED.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Likewise.

ld/testsuite/

2012-05-20  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/14105
* ld-elf/eh4.d: Add PLT eh_frame.

* ld-i386/i386.exp: Run pr12570a and pr12570b.
* ld-x86-64/x86-64.exp: Likewise.

* ld-i386/pr12570a.d: New file.
* ld-i386/pr12570a.s: Likewise.
* ld-i386/pr12570b.s: Likewise.
* ld-i386/pr12570b.s: Likewise.
* ld-x86-64/pr12570a.d: Likewise.
* ld-x86-64/pr12570a.s: Likewise.
* ld-x86-64/pr12570b.d: Likewise.
* ld-x86-64/pr12570b.s: Likewise.

2012-05-22  Will Deacon  <will.deacon@arm.com>

* linux-low (__UCLIBC__ && !(__UCLIBC_HAS_MMU__ || __ARCH_HAS_MMU__)):
Include asm/ptrace.h.
(PT_TEXT_ADDR, PT_DATA_ADDR, PT_TEXT_END_ADDR): Define only if not
already defined.

* elflink.c (bfd_elf_discard_info): Handle multiple .eh_frame
sections attached to a BFD.
* section.c (bfd_get_section_by_name): Rewrite description.
(bfd_get_next_section_by_name): New function.
* bfd-in2.h: Regenerate.

* tracepoint.c (start_tracing): Add missing i18n markup.
(stop_tracing, set_trace_user): Ditto.
(set_trace_notes, set_trace_stop_notes): Ditto.

gas: mips: fix segfault with invalid default cpu strings

If you configure gas for a mips32el-* target, the default cpu calculation
gets mangled, and we end up passing and invalid value as the default cpu.

If you try executing gas after that, it segfaults.  This is because it
assumes that the default cpu value is always valid.
$ ./gas/as-new
Assembler messages:
Error: Bad value (2) for default CPU
Segmentation fault (core dumped)

I'm not debating that the target tuple is valid, just that gas shouldn't
crash.  So add a friendly assert to avoid that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

daily update

*** empty log message ***

* linux-low.c (linux_store_registers): Don't re-retrieve data
with ptrace that has already been obtained from /proc.  Always
copy any data retrieved with ptrace to the buffer supplied.

PR c++/7173:
* gnu-v3-abi.c (gnuv3_baseclass_offset): Return early for Java
types.
* value.h (value_cast_pointers): Update.
* valops.c (value_cast_pointers): Add 'subclass_check' argument.
(value_cast): Update.
(update_search_result): New function.
(do_search_struct_field): New, from search_struct_field.  Check
for ambiguous results.
(search_struct_field): Rewrite.
* infcall.c (value_arg_coerce): Update.
* eval.c (evaluate_subexp_standard) <STRUCTOP_MEMBER>: Use
value_cast_pointers.
* ada-lang.c (ada_convert_actual): Update.
testsuite
* gdb.cp/inherit.exp (test_print_mi_members): Expect errors.
Remove kfails.
(test_print_mi_member_types): Likewise.

* gdb.base/callfuncs.exp (do_function_calls): Update for 'set
print symbol' change.

Include "config.h" first

* testsuite/tls_test.cc: Include "config.h" first.
* testsuite/tls_test_c.c: Likewise.

* macroexp.c (macro_stringify): Terminate the string.

* elf32-m68k.c (elf_m68k_grok_prstatus): New function.
(elf_m68k_grok_psinfo): New function.
(elf_backend_grok_prstatus): Define.
(elf_backend_grok_psinfo): Define.

daily update

*** empty log message ***

gdb/
* NEWS (--with-auto-load-dir): Prepend $debugdir to the default path.
Describe it.
* auto-load.c (auto_load_expand_dir_vars): New function.
(auto_load_safe_path_vec_update): Use it, remove the
substitute_path_component call thanks to it.
(auto_load_objfile_script): Remove the debug_file_directory processing.
Use auto_load_expand_dir_vars, remove the substitute_path_component
call thanks to it.
* configure: Regenerate.
* configure.ac (--with-auto-load-dir): Prepend $debugdir to the default
path.  Escape $ also for $debugdir.
(--with_auto_load_safe_path): Escape $ also for $debugdir.
* utils.c (substitute_path_component): Accept also DIRNAME_SEPARATOR.

gdb/doc/
* gdb.texinfo (Separate Debug Files): New anchor debug-file-directory.
Mention also --with-separate-debug-dir.
(Auto-loading): Prepend $debugdir in the sample output.
(Auto-loading safe path): Likewise.  Mention also $debugdir for the
auto-load safe-path variable.
(objfile-gdb.py file): Remove the extra debug-file-directory paragraph.
Mention also $debugdir for 'set auto-load scripts-directory'.

* dwarf2read.c (recursively_find_pc_sect_symtab): Initialize "s"
before use.  Check for symtab->includes == NULL before scanning it.

PR 14072
* interp.c: Include config.h before system header files.

*** empty log message ***

daily update

* elf64-mips.c (elf_backend_got_header_size): Correct definition.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Use the ELF
backend's GOT header size instead of hardcoding it.

* elf32-vax.c (elf_vax_relocate_section)
<R_VAX_8, R_VAX_16, R_VAX_32>: Don't check if info->shared again.

* elf32-vax.c (elf_vax_relocate_section)
<R_VAX_8, R_VAX_16, R_VAX_32>: Use section flags rather than
its name as the check for text sections.

* elf64-mips.c (mips_elf64_be_swap_reloc_out): Also make sure
the third reloc offset is the same as the first.

PR 14072
* wrapper.c: Include config.h before system header files.

* callback.c: Include config.h before system header files.
* cgen-trace.c: Likewise.
* cgen-utils.c: Likewise.
* gentmap.c: Likewise.

* sim-if.c: Include config.h before system header files.

* compile.c: Include config.h before system header files.
* sim-main.h: Likewise.

* gdb-if.c: Include config.h before system header files.
* load.c: Likewise.
* syscalls.c: Likewise.
* trace.c: Likewise.

* interp.c: Include config.h before system header files.

* ld-elf/elf.exp (note-3.so): xfail tic6x due to non-pic warnings.

* gas/tic6x/unwind-1.d: Update for readelf changes.
* gas/tic6x/unwind-2.d: Likewise.
* gas/tic6x/unwind-3.d: Likewise.

* config/obj-elf.c (obj_elf_section): Cater for TC_KEEP_OPERAND_SPACES
targets when checking for "comdat".

Use @acronym{MIPS} where appropriate.
See http://sourceware.org/ml/gdb-patches/2012-04/threads.html#01091 and
http://sourceware.org/ml/gdb-patches/2012-05/threads.html#00731 for the
related discussions.

* gdb.texinfo (Continuing and Stepping, Selection, Byte Order)
(MIPS Embedded, MIPS, MIPS Register packet Format)
(Target Descriptions, MIPS Features): Use @acronym{MIPS} where
appropriate.

bfd/
* elf32-ppc.h (has_vle_insns, is_ppc_vle): Delete.
(has_tls_reloc, has_tls_get_addr_call): Move back to..
* elf32-ppc.c: ..here.
(ppc_elf_section_flags, elf_backend_section_flags): Delete.
(ppc_elf_modify_segment_map): Use ELF sh_flags to detect VLE sections.
opcodes/
* ppc-dis.c: Don't include elf32-ppc.h, do include elf/ppc.h.
(get_powerpc_dialect): Detect VLE sections from ELF sh_flags.
ld/testsuite/
* ld-powerpc/vle.ld: New.
* ld-powerpc/powerpc.exp (vle reloc tests): Link using vle.ld.

* gdb.python/py-prompt.exp: Quit if the target is remote.

daily update

*** empty log message ***

* mips-tdep.c (mips_reg3_to_reg): Optimize storage.

gdb/
* NEWS: Add microMIPS support and "set mips compression",
"show mips compression" commands.
* mips-tdep.h (mips_isa): New enum.
(gdbarch_tdep): Add mips_isa.
(mips_pc_is_mips16): Update prototype.
(mips_pc_is_mips, mips_pc_is_micromips): New prototypes.
* mips-tdep.c (mips_compression_mips16): New variable.
(mips_compression_micromips): Likewise.
(mips_compression_strings): Likewise.
(mips_compression_string): Likewise.
(is_mips16_isa, is_micromips_isa): New functions.
(is_mips16_addr): Rename to...
(is_compact_addr): ... this.
(unmake_mips16_addr): Likewise to...
(unmake_compact_addr): ... this.
(make_mips16_addr): Likewise to...
(make_compact_addr): ... this.
(is_mips_addr, is_mips16_addr, is_micromips_addr): New
functions.
(mips_elf_make_msymbol_special): Handle microMIPS code.
(msymbol_is_special): Rename to...
(msymbol_is_mips16): ... this.
(mips_make_symbol_special, mips_pc_is_mips16): Update
accordingly.
(msymbol_is_mips, msymbol_is_micromips): New functions.
(mips16_to_32_reg): Rename to...
(mips_reg3_to_reg): ... this.
(mips_pc_is_mips, mips_pc_is_micromips): New functions.
(mips_pc_isa): Likewise.
(mips_read_pc, mips_unwind_pc, mips_write_pc): Handle microMIPS
code.
(mips_fetch_instruction): Pass return status instead of printing
an error message if requested.  Handle microMIPS code.  Bail out
on an invalid ISA.
(micromips_op): New macro.
(b0s4_imm, b0s5_imm, b0s5_reg, b0s7_imm, b0s10_imm): Likewise.
(b1s9_imm, b2s3_cc, b4s2_regl, b5s5_op, b5s5_reg): Likewise.
(b6s4_op, b7s3_reg): Likewise.
(b0s6_op, b0s11_op, b0s12_imm, b0s16_imm, b0s26_imm): Likewise.
(b6s10_ext, b11s5_reg, b12s4_op): Likewise.
(mips_insn_size): New function.
(mips32_next_pc): Update mips_fetch_instruction call.
(micromips_relative_offset7): New function.
(micromips_relative_offset10): Likewise.
(micromips_relative_offset16): Likewise.
(micromips_pc_insn_size): Likewise.
(micromips_bc1_pc): Likewise.
(micromips_next_pc): Likewise.
(unpack_mips16): Update mips_fetch_instruction call.
(extended_mips16_next_pc): Update according to change to
mips16_to_32_reg.
(mips_next_pc): Update mips_pc_is_mips16 call.  Handle microMIPS
code.
(mips16_scan_prologue): Update mips_fetch_instruction call.
Update according to change to mips16_to_32_reg.
(mips_insn16_frame_sniffer): Update mips_pc_is_mips16 call.
(mips_insn16_frame_base_sniffer): Likewise.
(micromips_decode_imm9): New function.
(micromips_scan_prologue): Likewise.
(mips_micro_frame_cache): Likewise.
(mips_micro_frame_this_id): Likewise.
(mips_micro_frame_prev_register): Likewise.
(mips_micro_frame_sniffer): Likewise.
(mips_micro_frame_unwind): New variable.
(mips_micro_frame_base_address): New function.
(mips_micro_frame_base): New variable.
(mips_micro_frame_base_sniffer): New function.
(mips32_scan_prologue): Update mips_fetch_instruction call.
(mips_insn32_frame_sniffer): Check for the standard MIPS ISA
rather than for MIPS16.
(mips_insn32_frame_base_sniffer): Likewise.
(mips_addr_bits_remove): Handle microMIPS code.
(deal_with_atomic_sequence): Rename to...
(mips_deal_with_atomic_sequence): ... this.  Update the type
of the variable used to hold an instruction.  Remove the ISA bit
check.  Update mips_fetch_instruction call.
(micromips_deal_with_atomic_sequence): New function.
(deal_with_atomic_sequence): Likewise.
(mips_about_to_return): Handle microMIPS code.  Update
mips_fetch_instruction call.
(heuristic_proc_start): Check for the standard MIPS ISA rather
than for MIPS16.  Update mips_pc_is_mips16 and
mips_fetch_instruction calls.  Handle microMIPS code.
(mips_push_dummy_code): Handle microMIPS code.
(mips_eabi_push_dummy_call): Likewise.
(mips_o32_return_value): Update mips_pc_is_mips16 call.
(mips_o64_push_dummy_call): Handle microMIPS code.
(mips_o64_return_value): Update mips_pc_is_mips16 call.
(is_delayed): Remove function.
(mips_single_step_through_delay): Replace the call to is_delayed
with mips32_instruction_has_delay_slot.  Correct MIPS16 handling.
Handle microMIPS code.
(mips_skip_prologue): Update mips_pc_is_mips16 call.  Handle
microMIPS code.
(mips32_in_function_epilogue_p): Update mips_fetch_instruction
call.
(micromips_in_function_epilogue_p): New function.
(mips16_in_function_epilogue_p): Update mips_fetch_instruction
call.
(mips_in_function_epilogue_p): Update mips_pc_is_mips16 call.
Handle microMIPS.
(gdb_print_insn_mips): Likewise.
(mips_breakpoint_from_pc): Likewise.
(mips_remote_breakpoint_from_pc): New function.
(mips32_instruction_has_delay_slot): Simplify making use of the
updated mips_fetch_instruction interface.
(micromips_instruction_has_delay_slot): New function.
(mips16_instruction_has_delay_slot): Simplify making use of the
updated mips_fetch_instruction interface.
(mips_adjust_breakpoint_address): Check for the standard MIPS
ISA rather than for MIPS16 ISA.  Update for unmake_compact_addr
calls.  Handle microMIPS code.
(mips_get_mips16_fn_stub_pc): Update mips_fetch_instruction call.
(mips_skip_trampoline_code): Handle microMIPS code.
(global_mips_compression): New function.
(mips_gdbarch_init): Handle the compressed ISA setting from ELF
file flags.  Register the microMIPS remote breakpoint handler
and heuristic frame unwinder.
(show_mips_compression): New function.
(_initialize_mips_tdep): Add the "set mips compression" and
"show mips compression" commands.

gdb/doc/
* gdb.texinfo (MIPS): Document "set mips compression" and "show
mips compression".
(MIPS Breakpoint Kinds): New subsubsection.

Fix typo.

* config/tc-dlx.c (s_proc): Don't use asprintf.

* gdb.texinfo (Architecture-Specific Protocol Details): Define
nodes for subsections.  Add @acronym mark-ups and adjust
formatting.

Don't make _DYNAMIC/_GLOBAL_OFFSET_TABLE_ absolute

bfd/

* elf32-i386.c (elf_i386_finish_dynamic_symbol): Don't make
_DYNAMIC nor _GLOBAL_OFFSET_TABLE_ absolute.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.

ld/testsuite/

* ld-i386/tlsdesc-nacl.rd: Update for dynamic sym changes.
* ld-i386/tlsdesc.rd: Likewise.
* ld-i386/tlsgdesc-nacl.rd: Likewise.
* ld-i386/tlsgdesc.rd: Likewise.
* ld-i386/tlsnopic-nacl.rd: Likewise.
* ld-i386/tlsnopic.rd: Likewise.
* ld-i386/tlspic-nacl.rd: Likewise.
* ld-i386/tlspic.rd: Likewise.
* ld-x86-64/tlsdesc-nacl.rd: Likewise.
* ld-x86-64/tlsdesc.rd: Likewise.
* ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* ld-x86-64/tlsgdesc.rd: Likewise.
* ld-x86-64/tlspic-nacl.rd: Likewise.
* ld-x86-64/tlspic.rd: Likewise.

2012-05-18  Sergio Durigan Junior  <sergiodj@redhat.com>

* ada-lang.c:
* ada-tasks.c:
* ada-varobj.c:
* amd64-darwin-tdep.c:
* arm-symbian-tdep.c:
* arm-tdep.c:
* avr-tdep.c:
* ax-gdb.c:
* bfin-linux-tdep.c:
* breakpoint.c:
* c-valprint.c:
* cli/cli-cmds.c:
* coffread.c:
* cp-support.c:
* cris-tdep.c:
* dwarf2-frame-tailcall.c:
* dwarf2-frame.c:
* dwarf2expr.c:
* dwarf2loc.c:
* dwarf2read.c:
* elfread.c:
* eval.c:
* expprint.c:
* f-valprint.c:
* frv-tdep.c:
* h8300-tdep.c:
* hppa-hpux-tdep.c:
* hppa-tdep.c:
* hppanbsd-tdep.c:
* i386-nto-tdep.c:
* i386-tdep.c:
* i387-tdep.c:
* ia64-tdep.c:
* jit.c:
* linespec.c:
* linux-tdep.c:
* lm32-tdep.c:
* m2-valprint.c:
* m32c-tdep.c:
* m32r-rom.c:
* m32r-tdep.c:
* m68k-tdep.c:
* m68klinux-tdep.c:
* mi/mi-main.c:
* microblaze-tdep.c:
* mips-linux-tdep.c:
* mips-tdep.c:
* mn10300-tdep.c:
* p-valprint.c:
* parse.c:
* ppc-linux-tdep.c:
* ppc-sysv-tdep.c:
* printcmd.c:
* python/py-finishbreakpoint.c:
* python/py-inferior.c:
* python/py-infthread.c:
* python/py-type.c:
* python/python.c:
* remote-fileio.c:
* remote-m32r-sdi.c:
* remote-mips.c:
* reverse.c:
* rl78-tdep.c:
* rs6000-aix-tdep.c:
* rs6000-tdep.c:
* s390-tdep.c:
* score-tdep.c:
* sh64-tdep.c:
* skip.c:
* solib-darwin.c:
* solib-dsbt.c:
* solib-frv.c:
* sparc-tdep.c:
* spu-multiarch.c:
* spu-tdep.c:
* stack.c:
* symfile.c:
* symtab.c:
* tic6x-tdep.c:
* tracepoint.c:
* v850-tdep.c:
* valarith.c:
* valprint.c:
* value.c:
* xcoffread.c:
* xtensa-tdep.c:
* ada-lang.c:
* ada-tasks.c:
* ada-varobj.c:
* amd64-darwin-tdep.c:
* arm-symbian-tdep.c:
* arm-tdep.c: Delete unused variables.

gdb/testsuite/
Fix ERROR: internal buffer is full.
* gdb.base/info-os.exp (expect_multiline): New function.
(get process list, get process groups, get threads)
(get file descriptors, get internet-domain sockets)
(get shared-memory regions, get semaphores, get message queues): Use
it for these tests.

gdb/
Rename $ddir to $datadir.
* NEWS (--with-auto-load-dir): Rename $ddir to $datadir.
* auto-load.c (auto_load_safe_path_vec_update)
(auto_load_gdb_datadir_changed, auto_load_objfile_script): Likewise.
* configure: Regenerate.
* configure.ac (--with-auto-load-dir, --with-auto-load-safe-path):
Likewise.  Remove the 'use $ddir' help string.

gdb/doc/
Rename $ddir to $datadir.
* gdb.texinfo (Auto-loading, Auto-loading safe path)
(objfile-gdb.py file): Rename $ddir to $datadir.

gdb/
* auto-load.c (show_auto_load_safe_path): Accept any combination of
DIRNAME_SEPARATOR and IS_DIR_SEPARATOR for wild-match.

* archive.c (_bfd_generic_read_ar_hdr_mag): Fix last change so as
not to clobber the ar_fmag field stored in ARED->arch_header.

PR exp/13907:
* valprint.h (struct value_print_options) <symbol_print>: New
field.
* valprint.c (user_print_options): Add default for symbol_print.
(show_symbol_print): New function.
(generic_val_print): Respect symbol_print.
(_initialize_valprint): Add "print symbol" setting.
* f-valprint.c (f_val_print): Respect symbol_print.
* c-valprint.c (c_val_print): Respect symbol_print.
* NEWS: Update.
* printcmd.c (print_address_symbolic): Return int.  Ignore some
zero-size symbols.
(print_address_demangle): Return int.
* defs.h: (print_address_symbolic): Return int.
* value.h (print_address_demangle): Return int.
doc
* gdb.texinfo (Print Settings): Document 'set print symbol'.
testsuite
* gdb.mi/mi-var-cmd.exp: Update.
* gdb.objc/basicclass.exp (do_objc_tests): Update.
* gdb.cp/virtbase.exp: Update.
* gdb.cp/classes.exp (test_static_members): Update.
* gdb.cp/casts.exp: Update.
* gdb.base/pointers.exp: Update.
* gdb.base/funcargs.exp (pointer_args): Update.
(structs_by_reference): Update.
* gdb.base/find.exp: Update.
* gdb.base/call-strs.exp: Send "set print symbol off".
* gdb.base/call-ar-st.exp: Update.
* gdb.ada/fun_addr.exp: Update.
* gdb.base/printcmds.exp (test_print_symbol): New proc.
Call it.
(test_print_repeats_10, test_print_strings)
(test_print_char_arrays): Update.

* valprint.c (val_print_string): Don't print leading space.
* p-valprint.c (pascal_val_print) <TYPE_CODE_PTR>: Optionally
print space before string or vtbl.
* m2-valprint.c (print_unpacked_pointer): Optionally print space
before string.
* jv-valprint.c (java_value_print): Print space before string.
* go-valprint.c (print_go_string): Print space before string.
* f-valprint.c (f_val_print) <TYPE_CODE_PTR>: Optionally print
space before string.
* c-valprint.c (c_val_print) <TYPE_CODE_PTR>: Optionally print
space before string or vtbl.
* auxv.c (fprint_target_auxv): Print space after address.

* printcmd.c (print_address_demangle): Remove special case for 0.
testsuite
* gdb.mi/mi2-var-display.exp: Update.
* gdb.mi/mi-var-display.exp: Update.
* gdb.mi/mi-var-child.exp: Update.
* gdb.cp/expand-psymtabs-cxx.exp: Update.
* gdb.cp/cp-relocate.exp (get_func_address): Update.

* printcmd.c (print_address_demangle): Add 'opts' argument.
* p-valprint.c (pascal_val_print): Update.
* jv-valprint.c (java_val_print): Update.
* value.h: Update.
* valprint.c (generic_val_print): Update.
(print_function_pointer_address): Add 'options' argument.  Remove
'addressprint' argument.  Update.
* m2-valprint.c (print_unpacked_pointer): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
(gnuv3_print_method_ptr): Update.
* f-valprint.c (f_val_print): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* valprint.h (print_function_pointer_address): Update.
* c-valprint.c (c_val_print): Update.

2012-05-18  Pedro Alves  <palves@redhat.com>

* mach-o.h: Don't include sysdep.h.

* psymtab.c (find_pc_sect_symtab_from_partial): Return the symtab
directly corresponding to the found psymtab.
* dwarf2read.c (recursively_find_pc_sect_symtab): New function.
(dw2_find_pc_sect_symtab): Use it.
* block.h (blockvector_contains_pc): Declare.
* block.c (find_block_in_blockvector): New function.
(blockvector_for_pc_sect): Use it.
(blockvector_contains_pc): New function.

* mips-tdep.h (mips_write_pc): New prototype.
* mips-tdep.c (mips_write_pc): Make external, add description.
* mips-linux-tdep.c (mips_linux_write_pc): Use mips_write_pc,
add description.

* mips-tdep.c (mips_read_pc): Use gdbarch_pc_regnum instead of
mips_regnum->pc.
(mips_unwind_pc, mips_write_pc): Likewise.
(mips_gdbarch_init): Remove a comment on gdbarch_pc_regnum and
gdbarch_read_pc.

PR 14072
* bfd-in.h: Check for PACKAGE or PACKAGE_VERSION before
complaining about config.h not having been included.
* bfd-in2.h: Regenerate.

* ld-tic6x/mvk-reloc-local-r.d: Adjust for signed addend.
* ld-tic6x/unwind-6.d: Typo fix.

* config/tc-dlx.c (s_proc): Avoid warning about ignoring asprintf
return value.

* config/tc-ppc.c: Don't capitalise error and warning messages.
(md_parse_option): Add checks for -a32 -mvle.

* config/obj-evax.c: Include as.h first.

* ia64-opc.c: Remove #include "ansidecl.h".
* z8kgen.c: Include sysdep.h first.

* ld-elf/init-mixed.c: Include config.h first.

* arc-dis.c: Include sysdep.h first, remove some redundant includes.
* bfin-dis.c: Likewise.
* i860-dis.c: Likewise.
* ia64-dis.c: Likewise.
* ia64-gen.c: Likewise.
* m68hc11-dis.c: Likewise.
* mmix-dis.c: Likewise.
* msp430-dis.c: Likewise.
* or32-dis.c: Likewise.
* rl78-dis.c: Likewise.
* rx-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* tilegx-opc.c: Likewise.
* tilepro-opc.c: Likewise.
* rx-decode.c: Regenerate.

* ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.

* ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.

* info-macros.exp: Pass "debug" to prepare_for_testing.

daily update

*** empty log message ***

bfd/
* aclocal.m4: Regenerate.
* Makefile.in: Regenerate.

binutils/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.

gas/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.

* Makefile.in (clean): Remove Fission .dwo and .dwp files.
* gdb.ada/Makefile.in (clean): Ditto.
* gdb.arch/Makefile.in (clean): Ditto.
* gdb.asm/Makefile.in (clean): Ditto.
* gdb.base/Makefile.in (clean): Ditto.
* gdb.cell/Makefile.in (clean): Ditto.
* gdb.cp/Makefile.in (clean): Ditto.
* gdb.disasm/Makefile.in (clean): Ditto.
* gdb.dwarf2/Makefile.in (clean): Ditto.
* gdb.fortran/Makefile.in (clean): Ditto.
* gdb.go/Makefile.in (clean): Ditto.
* gdb.hp/Makefile.in (clean): Ditto.
* gdb.hp/gdb.aCC/Makefile.in (clean): Ditto.
* gdb.hp/gdb.base-hp/Makefile.in (clean): Ditto.
* gdb.hp/gdb.compat/Makefile.in (clean): Ditto.
* gdb.hp/gdb.defects/Makefile.in (clean): Ditto.
* gdb.hp/gdb.objdbg/Makefile.in (clean): Ditto.
* gdb.java/Makefile.in (clean): Ditto.
* gdb.linespec/Makefile.in (clean): Ditto.
* gdb.mi/Makefile.in (clean): Ditto.
* gdb.modula2/Makefile.in (clean): Ditto.
* gdb.multi/Makefile.in (clean): Ditto.
* gdb.objc/Makefile.in (clean): Ditto.
* gdb.opencl/Makefile.in (clean): Ditto.
* gdb.opt/Makefile.in (clean): Ditto.
* gdb.pascal/Makefile.in (clean): Ditto.
* gdb.python/Makefile.in (clean): Ditto.
* gdb.reverse/Makefile.in (clean): Ditto.
* gdb.server/Makefile.in (clean): Ditto.
* gdb.stabs/Makefile.in (clean): Ditto.
* gdb.threads/Makefile.in (clean): Ditto.
* gdb.trace/Makefile.in (clean): Ditto.
* gdb.xml/Makefile.in (clean): Ditto.

procfs.c: Remove unused functions and make many functions static

gdb/ChangeLog:

        * procfs.c (procfs_find_new_threads, procfs_pid_to_str,
        proc_warn, proc_error, proc_get_status, proc_flags,
        proc_why, proc_what, proc_nsysarg, proc_sysargs,
        proc_set_run_on_last_close, proc_unset_run_on_last_close,
        proc_unset_inherit_on_fork, proc_set_async, proc_unset_async,
        proc_stop_process, proc_wait_for_stop, proc_run_process,
        proc_set_traced_signals, proc_set_traced_faults,
        proc_set_traced_sysentry, proc_set_traced_sysexit,
        proc_set_held_signals, proc_get_held_signals,
        proc_get_traced_signals, proc_get_traced_faults,
        proc_get_traced_sysentry, proc_get_traced_sysexit,
        proc_clear_current_fault, proc_set_current_signal,
        proc_clear_current_signal, proc_get_gregs, proc_get_fpregs,
        proc_set_gregs, proc_set_fpregs, proc_kill, proc_parent_pid,
        proc_get_nthreads, proc_get_nthreads, proc_get_nthreads,
        proc_get_current_thread, proc_get_current_thread,
        proc_get_current_thread, proc_update_threads,
        proc_update_threads, proc_update_threads, proc_update_threads,
        proc_iterate_over_threads, procfs_find_new_threads,
        procfs_pid_to_str): Make static.  Remove advance declaration.
        (proc_cursig): Make static.  Conditionalized defintion on
        PROCFS_DONT_PIOCSSIG_CURSIG being defined.
        (proc_syscall, proc_set_kill_on_last_close,
        proc_unset_kill_on_last_close, proc_set_inherit_on_fork,
        proc_get_pending_signals, proc_get_signal_actions,
        proc_trace_signal, proc_ignore_signal): Delete.

Expect addend as signed

binutils/testsuite/

* binutils-all/hppa/objdump.exp: Expect addend as signed.

gas/testsuite/

* gas/all/weakref1.d: Expect addend as signed.
* gas/arm/pic_vxworks.d: Likewise.
* gas/arm/wince.d: Likewise.
* gas/h8300/h8300.exp: Likewise.
* gas/i386/sub.d: Likewise.
* gas/mips/ecoff@ld.d: Likewise.
* gas/mips/ecoff@sd.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/l_d.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/mips1@l_d.d: Likewise.
* gas/mips/mips1@ld-forward.d: Likewise.
* gas/mips/mips1@ld.d: Likewise.
* gas/mips/mips1@s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mmix/bz-c.d: Likewise.
* gas/mmix/geta-c.d: Likewise.
* gas/mmix/jump-c.d: Likewise.
* gas/mmix/pushj-c.d: Likewise.
* gas/mmix/pushj-cs.d: Likewise.
* gas/mmix/reloc16-n.d: Likewise.
* gas/mmix/reloc16-r.d: Likewise.
* gas/mmix/reloc16.d: Likewise.
* gas/mmix/reloc8-r.d: Likewise.
* gas/mmix/reloc8.d: Likewise.
* gas/mmix/relocxrn.d: Likewise.
* gas/sh/sh64/case-1.d: Likewise.
* gas/sh/sh64/mix-1.d: Likewise.
* gas/sh/sh64/pt32-1.d: Likewise.
* gas/sh/sh64/pt64-1.d: Likewise.
* gas/sh/sh64/pt64-32-2.d: Likewise.
* gas/sh/sh64/rel32-2.d: Likewise.
* gas/sh/sh64/rel32-4.d: Likewise.
* gas/sh/sh64/rel64-2.d: Likewise.
* gas/sh/sh64/rel64-4.d: Likewise.
* gas/tic6x/data-reloc.d: Likewise.
* gas/tic6x/pcr-relocs.d: Likewise.
* gas/xstormy16/allinsn.d: Likewise.
* gas/xstormy16/reloc-1.d: Likewise.
* gas/xstormy16/reloc-2.d: Likewise.

ld/testsuite/

* ld-arm/emit-relocs1-vxworks.d: Expect addend as signed.
* ld-spu/pic.d: Likewise.

PR 14072
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.

* lib/ld-lib.exp (run_dump_test): For options "warning" and
"error", append to earlier option values without adding a space.

typo fixes

binutils/
* dwarf.c (process_debug_info): Display abbrev offset in hex.
(display_debug_abbrev): Show offset of abbrev.

binutils/testsuite/
* binutils-all/objdump.W: Update.
* binutils-all/readelf.wa: Update.
* binutils-all/i386/compressed-1a.d: Update.
* binutils-all/x86-64/compressed-1a.d: Update.

gas/testsuite/
* gas/elf/dwarf2-1.d: Update.
* gas/elf/dwarf2-2.d: Update.
* gas/i386/dw2-compress-1.d: Update.

* dwarf.c (display_debug_ranges): Don't report more than one use
of the same range set as an overlap.

* gas/ppc/vle.d: Pass -a32 to assembler.
* gas/ppc/vle-reloc.d: Likewise.
* gas/ppc/vle-simple-1.d: Likewise, also match wider addresses.
* gas/ppc/vle-simple-2.d: Likewise.
* gas/ppc/vle-simple-3.d: Likewise.
* gas/ppc/vle-simple-4.d: Likewise.
* gas/ppc/vle-simple-5.d: Likewise.
* gas/ppc/vle-simple-6.d: Likewise.

* elf.c (ignore_section_sym): Correct comment.  Don't return
true for absolute section.
(elf_map_symbols): Move stray comment.  Adjust for above change.
Don't discard global section symbols.

* ld-m68k/tls-ld-1.d: Update.

bfd/
* elf32-ppc.c (ppc_elf_finish_dynamic_symbol): Don't make _DYNAMIC,
_GLOBAL_OFFSET_TABLE_ or _PROCEDURE_LINKAGE_TABLE_ absolute.
* elf64-ppc.c (ppc64_elf_finish_dynamic_symbol): Don't make _DYNAMIC
absolute.
ld/testsuite/
* ld-powerpc/tlsso.r: Update for dynamic sym changes.
* ld-powerpc/tlsso32.d: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/tlstocso.r: Likewise.

bfd/
* elf32-ppc.c (has_tls_reloc, has_tls_get_addr_call, has_vle_insns,
is_ppc_vle): Move to..
* elf32-ppc.h: ..here, making is_ppc_vle a macro.
opcodes/
* ppc_dis.c: Don't include elf/ppc.h.

*** empty log message ***

daily update

2012-05-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* coffread.c (cs_section_address): Passing proper argument for
`bfd_get_section_vma'.
* dwarf2read.c (dwarf2_locate_sections): Likewise, for
`bfd_get_section_flags'.
* remote.c (remote_trace_set_readonly_regions): Likewise, for
`bfd_get_section_vma'.

PR macros/13205:
* macrotab.h: (macro_define_special): Declare.
(enum macro_special_kind): New.
(struct macro_definition) <argc, replacement>: Update comments.
* macrotab.c (new_macro_definition): Unconditionally set 'argc'.
(macro_define_object_internal): New function.
(macro_define_object): Use it.
(macro_define_special): New function.
(fixup_definition): New function.
(macro_lookup_definition, foreach_macro_in_scope)
(foreach_macro): Use fixup_definition.
* macroexp.h (macro_stringify): Declare.
* macroexp.c (free_buffer_return_text): New function.
(stringify): Constify "arg".
(macro_stringify): New function.
* dwarf2read.c (macro_start_file): Call macro_define_special.
testsuite
* gdb.base/macscp1.c (macscp_expr): Add comment.
* gdb.base/macscp.exp: Test __FILE__ and __LINE__.

* ld-arm/gc-hidden-1.d: Fix disassembly pattern.

Fix one of my ChangeLog entries.

I copy/pasted the wrong text... This fixes it.

* bfd-in.h (bfd_get_section_name, bfd_get_section_vma,
bfd_get_section_lma, bfd_get_section_alignment,
bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
in order to use the `bfd' argument.
* bfd-in2.h: Regenerate.
* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
as the first argument for `bfd_get_section_alignment'.
* elf32-arm.c (create_ifunc_sections): Likewise, for
`bfd_set_section_alignment'.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
`bfd_get_section_name'.
* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
`bfd_get_section_vma'.
* elf64-ppc.c (create_linkage_sections): Likewise, for
`bfd_set_section_alignment'.

* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
as the first argument for `bfd_get_section_name'.

* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
as the first argument for `bfd_get_section_vma'.

PR gas/14082
* app.c (do_scrub_chars): Prevent possible out of bounds access to
lex[] array.

PR 13503
* reloc.c: Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(avr_reloc_map): Ditto.

* config/tc-avr.c (avr_cons_fix_new): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(exp_mod_data) Ditto. And replace "hhi8" with "hlo8".
(md_apply_fix): Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.

* avr.h (RELOC_NUMBERS): Rename R_AVR_8_HHI8 to R_AVR_8_HLO8.

gdb/
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested.  Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise.  Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention.  Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.

gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.

PR binutils/13558
* bfd/aout-cris.c: Include sysdep.h before bfd.h.
* bfd/aout-ns32k.c: Likewise.
* bfd/aout-sparcle.c: Likewise.
* bfd/aout0.c: Likewise.
* bfd/bfd-in2.h: Likewise.
* bfd/coff-stgo32.c: Likewise.
* bfd/cpu-lm32.c: Likewise.
* bfd/cpu-microblaze.c: Likewise.
* bfd/cpu-score.c: Likewise.
* bfd/cpu-tilegx.c: Likewise.
* bfd/cpu-tilepro.c: Likewise.
* bfd/elf32-lm32.c: Likewise.
* bfd/elf32-microblaze.c: Likewise.
* bfd/elf32-score7.c: Likewise.
* bfd/elf32-tilepro.c: Likewise.
* bfd/elfxx-tilegx.c: Likewise.
* bfd/mach-o.h: Likewise.
* bfd/nlm32-ppc.c: Likewise.
* bfd/ns32knetbsd.c: Likewise.
* bfd/pef.h: Likewise.
* bfd/plugin.c: Likewise.
* bfd/stab-syms.c: Likewise.
* bfd/sunos.c: Likewise.
* bfd/syms.c: Likewise.
* bfd/xsym.h: Likewise.

* Makefile.am (CFILES): Add syslex_wrap.c.
(sysinfo): Depend upon syslex_wrap.o.
(syslex_wrap.o): New rule.
(syslex.o): Delete rule.
* syslex_wrap.c: New file.
* Makefile.in: Regenerate.

* elflink.c: Rename flaginfo to flinfo throughout, except..
(bfd_elf_lookup_section_flags): ..here, rename finfo to flaginfo.
Formatting, style.  Simplify flag match.

* dwarf2.c: Formatting.
(arange_add): Pass in unit rather than bfd.  Update callers.
Ignore empty ranges.  Don't ask for cleared memory.
(parse_comp_unit): Only set unit->base_address if processing
DW_TAG_compile_unit.
(find_debug_info): Optimise section lookup.
(place_sections): Use bfd_alloc for stash->adjusted_sections.
(find_line): Match previously parsed comp unit addresses as we
do for newly parsed comp units.

* archive.c (_bfd_generic_read_ar_hdr_mag):  Ensure sscanf
stops at end of ar_size field.

* arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
to PUSH/POP {reg}.

* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.

* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer.  Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.

PR ld/14069
* emultempl/elf32.em: Include *-*-gnu* targets in ld.so.conf
support.

* config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
51qm variants.

  PR ld/13962
  PR ld/7023
* elf.c (bfd_section_from_shdr): Fail when .dynsym sh_info is
out of range.  As a special case, fix sh_info for zero sh_size.
Do the same for .symtab.

daily update