Alper Ak [Tue, 8 Aug 2023 10:51:58 +0000 (13:51 +0300)]
USB: serial: option: add Quectel EG912Y module support
commit
6d79d9434c69bb8ffa8a631050eb0ad6b83d3e90 upstream.
Add Quectel EG912Y "DIAG, AT, MODEM"
0x6001: ECM / RNDIS + DIAG + AT + MODEM
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6001 Rev= 3.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0000
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Glover [Wed, 20 Dec 2023 13:57:40 +0000 (13:57 +0000)]
USB: serial: ftdi_sio: update Actisense PIDs constant names
commit
513d88a88e0203188a38f4647dd08170aebd85df upstream.
Update the constant names for unused USB PIDs (product identifiers) to
reflect the new products now using the PIDs.
Signed-off-by: Mark Glover <mark.glover@actisense.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Thu, 14 Dec 2023 08:08:16 +0000 (09:08 +0100)]
wifi: cfg80211: fix certs build to not depend on file order
commit
3c2a8ebe3fe66a5f77d4c164a0bea8e2ff37b455 upstream.
The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.
Cc: stable@vger.kernel.org
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes:
fb768d3b13ff ("wifi: cfg80211: Add my certificate")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Thu, 7 Dec 2023 13:20:50 +0000 (21:20 +0800)]
wifi: cfg80211: Add my certificate
commit
fb768d3b13ffa325b7e84480d488ac799c9d2cd7 upstream.
As announced [1][2], I have taken over maintainership of the
wireless-regdb project.
Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.
This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.
[1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/
[2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Seth Forshee <sforshee@kernel.org>
Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.tw
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Fri, 8 Dec 2023 07:50:04 +0000 (08:50 +0100)]
wifi: mt76: fix crash with WED rx support enabled
commit
cd607f2cbbbec90682b2f6d6b85e1525d0f43b19 upstream.
If WED rx is enabled, rx buffers are added to a buffer pool that can be
filled from multiple page pools. Because buffers freed from rx poll are
not guaranteed to belong to the processed queue's page pool, lockless
caching must not be used in this case.
Cc: stable@vger.kernel.org
Fixes:
2f5c3c77fc9b ("wifi: mt76: switch to page_pool allocator")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231208075004.69843-1-nbd@nbd.name
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tasos Sahanidis [Thu, 7 Dec 2023 13:44:41 +0000 (15:44 +0200)]
usb-storage: Add quirk for incorrect WP on Kingston DT Ultimate 3.0 G3
commit
772685c14743ad565bb271041ad3c262298cd6fc upstream.
This flash drive reports write protect during the first mode sense.
In the past this was not an issue as the kernel called revalidate twice,
thus asking the device for its write protect status twice, with write
protect being disabled in the second mode sense.
However, since commit
1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") that is no longer the case, thus the
device shows up read only.
[490891.289495] sd 12:0:0:0: [sdl] Write Protect is on
[490891.289497] sd 12:0:0:0: [sdl] Mode Sense: 2b 00 80 08
This does not appear to be a timing issue, as enabling the usbcore quirk
USB_QUIRK_DELAY_INIT has no effect on write protect.
Fixes:
1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable <stable@kernel.org>
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231207134441.298131-1-tasos@tasossah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Tue, 12 Dec 2023 13:50:35 +0000 (15:50 +0200)]
ARM: dts: Fix occasional boot hang for am3 usb
commit
9b6a51aab5f5f9f71d2fa16e8b4d530e1643dfcb upstream.
With subtle timings changes, we can now sometimes get an external abort on
non-linefetch error booting am3 devices at sysc_reset(). This is because
of a missing reset delay needed for the usb target module.
Looks like we never enabled the delay earlier for am3, although a similar
issue was seen earlier with a similar usb setup for dm814x as described in
commit
ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x").
Cc: stable@vger.kernel.org
Fixes:
0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremie Knuesel [Sun, 17 Dec 2023 11:22:43 +0000 (12:22 +0100)]
ALSA: usb-audio: Increase delay in MOTU M quirk
commit
48d6b91798a6694fdd6edb62799754b9d3fe0792 upstream.
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Signed-off-by: Jeremie Knuesel <knuesel@gmail.com>
Suggested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211975
Link: https://lore.kernel.org/r/20231217112243.33409-1-knuesel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Lechner [Tue, 31 Oct 2023 21:05:19 +0000 (16:05 -0500)]
iio: triggered-buffer: prevent possible freeing of wrong buffer
commit
bce61476dc82f114e24e9c2e11fb064781ec563c upstream.
Commit
ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes:
ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Carrasco [Tue, 21 Nov 2023 05:48:39 +0000 (06:48 +0100)]
iio: tmag5273: fix temperature offset
commit
3b8157ec4573e304a29b7bced627e144dbc3dfdb upstream.
The current offset has the scale already applied to it. The ABI
documentation defines the offset parameter as "offset to be added
to <type>[Y]_raw prior to scaling by <type>[Y]_scale in order to
obtain value in the <type> units as specified in <type>[Y]_raw
documentation"
The right value is obtained at 0 degrees Celsius by the formula provided
in the datasheet:
T = Tsens_t0 + (Tadc_t - Tadc_t0) / Tadc_res
where:
T = 0 degrees Celsius
Tsens_t0 (reference temperature) = 25 degrees Celsius
Tadc_t0 (16-bit format for Tsens_t0) = 17508
Tadc_res = 60.1 LSB/degree Celsius
The resulting offset is 16005.5, which has been truncated to 16005 to
provide an integer value with a precision loss smaller than the 1-LSB
measurement precision.
Fix the offset to apply its value prior to scaling.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/9879beec-05fc-4fc6-af62-d771e238954e@wolfvision.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wadim Egorov [Mon, 25 Sep 2023 13:44:27 +0000 (15:44 +0200)]
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
commit
60576e84c187043cef11f11d015249e71151d35a upstream.
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
Fixes:
f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support")
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nuno Sa [Thu, 2 Nov 2023 12:52:58 +0000 (13:52 +0100)]
iio: imu: adis16475: add spi_device_id table
commit
ee4d79055aeea27f1b8c42233cc0c90d0a8b5355 upstream.
This prevents the warning message "SPI driver has no spi_device_id for..."
when registering the driver. More importantly, it makes sure that
module autoloading works as spi relies on spi: modaliases and not of.
While at it, move the of_device_id table to it's natural place.
Fixes:
fff7352bf7a3c ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Carrasco [Thu, 26 Oct 2023 15:44:49 +0000 (17:44 +0200)]
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
commit
54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream.
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
Index [7,0]
--------------
idx 0 0,0
idx 1 1,0
idx 2 0,1
idx 3 1,1
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
Index [7,0] Trh
-----------------------
idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000)
idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000)
idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000)
idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000)
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes:
d574a87cc311 ("Add meas-spec sensors common part")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haibo Chen [Thu, 16 Nov 2023 07:10:26 +0000 (15:10 +0800)]
iio: adc: imx93: add four channels for imx93 adc
commit
2475ecdb9b6e177b133cf26e64e8d441d37bebde upstream.
According to the spec, this ADC totally support 8 channels.
i.MX93 contain this ADC with 4 channels connected to pins in
the package. i.MX95 contain this ADC with 8 channels connected
to pins in the package.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fixes:
7d02296ac8b8 ("iio: adc: add imx93 adc support")
Link: https://lore.kernel.org/r/20231116071026.611269-1-haibo.chen@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matti Vaittinen [Thu, 19 Oct 2023 13:23:56 +0000 (16:23 +0300)]
iio: kx022a: Fix acceleration value scaling
commit
92bfa4ab1b79be95c4f52d13f5386390f0a513c2 upstream.
The IIO ABI mandates acceleration values from accelerometer to be
emitted in m/s^2. The KX022A was emitting values in micro m/s^2.
Fix driver to report the correct scale values.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Jagath Jog J <jagathjog1996@gmail.com>
Fixes:
7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Tested-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/ZTEt7NqfDHPOkm8j@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Can Guo [Mon, 18 Dec 2023 15:32:17 +0000 (07:32 -0800)]
scsi: ufs: core: Let the sq_lock protect sq_tail_slot access
[ Upstream commit
04c116e2bdfc3969f9819d2cebfdf678353c354c ]
When accessing sq_tail_slot without protection from sq_lock, a race
condition can cause multiple SQEs to be copied to duplicate SQE slots. This
can lead to multiple stability issues. Fix this by moving the *dest
initialization in ufshcd_send_command() back under protection from the
sq_lock.
Fixes:
3c85f087faec ("scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()")
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1702913550-20631-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ChanWoo Lee [Fri, 15 Dec 2023 00:38:12 +0000 (09:38 +0900)]
scsi: ufs: qcom: Return ufs_qcom_clk_scale_*() errors in ufs_qcom_clk_scale_notify()
[ Upstream commit
9264fd61e628ce180a168e6b90bde134dd49ec28 ]
In commit
031312dbc695 ("scsi: ufs: ufs-qcom: Remove unnecessary goto
statements") the error handling was accidentally changed, resulting in the
error of ufs_qcom_clk_scale_*() calls not being returned.
This is the case I checked:
ufs_qcom_clk_scale_notify ->
'ufs_qcom_clk_scale_up_/down_pre_change' error ->
return 0;
Make sure those errors are properly returned.
Fixes:
031312dbc695 ("scsi: ufs: ufs-qcom: Remove unnecessary goto statements")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231215003812.29650-1-cw9316.lee@samsung.com
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Mon, 14 Nov 2022 11:06:26 +0000 (11:06 +0000)]
scsi: bnx2fc: Fix skb double free in bnx2fc_rcv()
[ Upstream commit
08c94d80b2da481652fb633e79cbc41e9e326a91 ]
skb_share_check() already drops the reference to the skb when returning
NULL. Using kfree_skb() in the error handling path leads to an skb double
free.
Fix this by removing the variable tmp_skb, and return directly when
skb_share_check() returns NULL.
Fixes:
01a4cc4d0cd6 ("bnx2fc: do not add shared skbs to the fcoe_rx_list")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221114110626.526643-1-weiyongjun@huaweicloud.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
George Stark [Mon, 27 Nov 2023 23:55:58 +0000 (02:55 +0300)]
iio: adc: meson: add separate config for axg SoC family
[ Upstream commit
59b75dcb0953813676b5030877f3f37cedaed87d ]
According to Amlogic custom kernels ADC of axg SoC family has
vref_select and requires this setting to work nominally and thus
needs a separate config.
Fixes:
90c6241860bf ("iio: adc: meson: init voltage control bits")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haoran Liu [Sun, 3 Dec 2023 19:00:23 +0000 (19:00 +0000)]
Input: ipaq-micro-keys - add error handling for devm_kmemdup
[ Upstream commit
59b6a747e2d39227ac2325c5e29d6ab3bb070c2a ]
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes:
d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Thu, 30 Nov 2023 14:04:45 +0000 (15:04 +0100)]
interconnect: qcom: sm8250: Enable sync_state
[ Upstream commit
bfc7db1cb94ad664546d70212699f8cc6c539e8c ]
Add the generic icc sync_state callback to ensure interconnect votes
are taken into account, instead of being pegged at maximum values.
Fixes:
b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-8250icc_syncstate-v1-1-7ce78ba6e04c@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Mon, 30 Oct 2023 02:02:19 +0000 (10:02 +0800)]
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
[ Upstream commit
c3df0e29fb7788c4b3ddf37d5ed87dda2b822943 ]
inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the
true value rather than only return IIO_VAL_INT.
Fixes:
d5098447147c ("iio: imu: mpu6050: add calibration offset support")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Tipton [Wed, 25 Oct 2023 14:58:29 +0000 (07:58 -0700)]
interconnect: Treat xlate() returning NULL node as an error
[ Upstream commit
ad2ab1297d0c80899125a842bb7a078abfe1e6ce ]
Currently, if provider->xlate() or provider->xlate_extended()
"successfully" return a NULL node, then of_icc_get_from_provider() won't
consider that an error and will successfully return the NULL node. This
bypasses error handling in of_icc_get_by_index() and leads to NULL
dereferences in path_find().
This could be avoided by ensuring provider callbacks always return an
error for NULL nodes, but it's better to explicitly protect against this
in the common framework.
Fixes:
87e3031b6fbd ("interconnect: Allow endpoints translation via DT")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20231025145829.11603-1-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maurizio Lombardi [Tue, 19 Dec 2023 16:48:23 +0000 (17:48 +0100)]
nvme-pci: fix sleeping function called from interrupt context
[ Upstream commit
f6fe0b2d35457c10ec37acc209d19726bdc16dbd ]
the nvme_handle_cqe() interrupt handler calls nvme_complete_async_event()
but the latter may call nvme_auth_stop() which is a blocking function.
Sleeping functions can't be called in interrupt context
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/15
Call Trace:
<IRQ>
__cancel_work_timer+0x31e/0x460
? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core]
? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core]
nvme_complete_async_event+0x365/0x480 [nvme_core]
nvme_poll_cq+0x262/0xe50 [nvme]
Fix the bug by moving nvme_auth_stop() to fw_act_work
(executed by the nvme_wq workqueue)
Fixes:
f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kent Gibson [Thu, 21 Dec 2023 01:20:36 +0000 (09:20 +0800)]
gpiolib: cdev: add gpio_device locking wrapper around gpio_ioctl()
[ Upstream commit
1d656bd259edb89dc1d9938ec5c5389867088546 ]
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can
call gpiochip_remove() which will set gdev->chip to NULL, after which
any subsequent access will cause a crash.
gpio_ioctl() was overlooked by the previous fix to protect syscalls
(
bdbbae241a04), so add protection for that.
Fixes:
bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Fixes:
d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes:
3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes:
aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexis Lothoré [Fri, 15 Dec 2023 21:34:24 +0000 (22:34 +0100)]
pinctrl: at91-pio4: use dedicated lock class for IRQ
[ Upstream commit
14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0:
c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1:
c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2:
c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3:
c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4:
c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0:
00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0:
00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0:
00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes:
776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 4 Dec 2023 08:47:01 +0000 (09:47 +0100)]
x86/xen: add CPU dependencies for 32-bit build
[ Upstream commit
93cd0597649844a0fe7989839a3202735fb3ae67 ]
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Fixes:
db2832309a82 ("x86/xen: fix percpu vcpu_info allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20231204084722.3789473-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quan Nguyen [Mon, 11 Dec 2023 10:22:16 +0000 (17:22 +0700)]
i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
[ Upstream commit
b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ]
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.
"aspeed-i2c-bus
1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"
Fixes:
f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ZhenGuo Yin [Tue, 19 Dec 2023 06:39:42 +0000 (14:39 +0800)]
drm/amdgpu: re-create idle bo's PTE during VM state machine reset
[ Upstream commit
4a0057afa35872a5f2e65576785844688dd9fa5e ]
Idle bo's PTE needs to be re-created when resetting VM state machine.
Set idle bo's vm_bo as moved to mark it as invalid.
Fixes:
55bf196f60df ("drm/amdgpu: reset VM when an error is detected")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 30 Nov 2023 01:43:24 +0000 (09:43 +0800)]
i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()
[ Upstream commit
043465b66506e8c647cdd38a2db1f2ee0f369a1b ]
Add missing clk_disable_unprepare() and geni_se_resources_off() in the error
path in geni_i2c_probe().
Fixes:
14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Tue, 19 Dec 2023 02:30:57 +0000 (10:30 +0800)]
ASoC: fsl_sai: Fix channel swap issue on i.MX8MP
[ Upstream commit
8f0f01647550daf9cd8752c1656dcb0136d79ce1 ]
When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.
The patch is to clear xMR in hw_free() to avoid such
channel swap issue.
Fixes:
3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jerome Brunet [Mon, 18 Dec 2023 14:56:52 +0000 (15:56 +0100)]
ASoC: hdmi-codec: fix missing report for jack initial status
[ Upstream commit
025222a9d6d25eee2ad9a1bb5a8b29b34b5ba576 ]
This fixes a problem introduced while fixing ELD reporting with no jack
set.
Most driver using the hdmi-codec will call the 'plugged_cb' callback
directly when registered to report the initial state of the HDMI connector.
With the commit mentionned, this occurs before jack is ready and the
initial report is lost for platforms actually providing a jack for HDMI.
Fix this by storing the hdmi connector status regardless of jack being set
or not and report the last status when jack gets set.
With this, the initial state is reported correctly even if it is
disconnected. This was not done initially and is also a fix.
Fixes:
15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe")
Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/
Cc: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Imre Deak [Wed, 13 Dec 2023 22:05:26 +0000 (00:05 +0200)]
drm/i915/mtl: Fix HDMI/DP PLL clock selection
[ Upstream commit
dbcab554f777390d9bb6a808ed0cd90ee59bb44e ]
Select the HDMI specific PLL clock only for HDMI outputs.
Fixes:
62618c7f117e ("drm/i915/mtl: C20 PLL programming")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213220526.1828827-1-imre.deak@intel.com
(cherry picked from commit
937d02cc79c6828fef28a4d80d8d0ad2f7bf2b62)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karthik Poosa [Mon, 4 Dec 2023 14:48:09 +0000 (20:18 +0530)]
drm/i915/hwmon: Fix static analysis tool reported issues
[ Upstream commit
768f17fd25e4a98bf5166148629ecf6f647d5efc ]
Updated i915 hwmon with fixes for issues reported by static analysis tool.
Fixed integer overflow with upcasting.
v2:
- Added Fixes tag (Badal).
- Updated commit message as per review comments (Anshuman).
Fixes:
4c2572fe0ae7 ("drm/i915/hwmon: Expose power1_max_interval")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204144809.1518704-1-karthik.poosa@intel.com
(cherry picked from commit
ac3420d3d428443a08b923f9118121c170192b62)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 21 Dec 2023 13:57:31 +0000 (13:57 +0000)]
afs: Fix use-after-free due to get/remove race in volume tree
[ Upstream commit
9a6b294ab496650e9f270123730df37030911b55 ]
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.
Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
...
RIP: 0010:refcount_warn_saturate+0x7a/0xda
...
Call Trace:
afs_get_volume+0x3d/0x55
afs_create_volume+0x126/0x1de
afs_validate_fc+0xfe/0x130
afs_get_tree+0x20/0x2e5
vfs_get_tree+0x1d/0xc9
do_new_mount+0x13b/0x22e
do_mount+0x5d/0x8a
__do_sys_mount+0x100/0x12a
do_syscall_64+0x3a/0x94
entry_SYSCALL_64_after_hwframe+0x62/0x6a
Fix this by:
(1) When putting, use a flag to indicate if the volume has been removed
from the tree and skip the rb_erase if it has.
(2) When looking up, use a conditional ref increment and if it fails
because the refcount is 0, replace the node in the tree and set the
removal flag.
Fixes:
20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 21 Dec 2023 15:09:31 +0000 (15:09 +0000)]
afs: Fix overwriting of result of DNS query
[ Upstream commit
a9e01ac8c5ff32669119c40dfdc9e80eb0b7d7aa ]
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.
Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure. Further, only do it if we don't have an alternative error
to return.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Based
on a patch from Anastasia Belova [1].
Fixes:
d5c32c89b208 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 9 Dec 2023 00:41:55 +0000 (00:41 +0000)]
keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry
[ Upstream commit
39299bdd2546688d92ed9db4948f6219ca1b9542 ]
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes:
1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 19 Dec 2023 12:53:31 +0000 (12:53 +0000)]
net: check dev->gso_max_size in gso_features_check()
[ Upstream commit
24ab059d2ebd62fdccc43794796f6ffbabe49ebc ]
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes:
82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Ahern [Tue, 19 Dec 2023 03:02:43 +0000 (20:02 -0700)]
net/ipv6: Revert remove expired routes with a separated list of routes
[ Upstream commit
dade3f6a1e4e35a5ae916d5e78b3229ec34c78ec ]
This reverts commit
3dec89b14d37ee635e772636dad3f09f78f1ab87.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes:
3dec89b14d37 ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Sun, 17 Dec 2023 15:37:40 +0000 (16:37 +0100)]
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
[ Upstream commit
7cb8cd4daacfea646cf8b5925ca2c66c98b18480 ]
In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.
Fixes:
799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Mon, 11 Dec 2023 15:15:02 +0000 (15:15 +0000)]
afs: Fix dynamic root lookup DNS check
[ Upstream commit
74cef6872ceaefb5b6c5c60641371ea28702d358 ]
In the afs dynamic root directory, the ->lookup() function does a DNS check
on the cell being asked for and if the DNS upcall reports an error it will
report an error back to userspace (typically ENOENT).
However, if a failed DNS upcall returns a new-style result, it will return
a valid result, with the status field set appropriately to indicate the
type of failure - and in that case, dns_query() doesn't return an error and
we let stat() complete with no error - which can cause confusion in
userspace as subsequent calls that trigger d_automount then fail with
ENOENT.
Fix this by checking the status result from a valid dns_query() and
returning an error if it indicates a failure.
Fixes:
bbb4c4323a4d ("dns: Allow the dns resolver to retrieve a server set")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Mon, 11 Dec 2023 15:08:57 +0000 (15:08 +0000)]
afs: Fix the dynamic root's d_delete to always delete unused dentries
[ Upstream commit
71f8b55bc30e82d6355e07811213d847981a32e2 ]
Fix the afs dynamic root's d_delete function to always delete unused
dentries rather than only deleting them if they're positive. With things
as they stand upstream, negative dentries stemming from failed DNS lookups
stick around preventing retries.
Fixes:
66c7e1d319a5 ("afs: Split the dynroot stuff out and give it its own ops tables")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Jian [Sat, 16 Dec 2023 07:52:18 +0000 (15:52 +0800)]
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
[ Upstream commit
01a564bab4876007ce35f312e16797dfe40e4823 ]
I got the below warning trace:
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit
01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes:
348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yury Norov [Fri, 15 Dec 2023 20:33:53 +0000 (12:33 -0800)]
net: mana: select PAGE_POOL
[ Upstream commit
340943fbff3d8faa44d2223ca04917df28786a07 ]
Mana uses PAGE_POOL API. x86_64 defconfig doesn't select it:
ld: vmlinux.o: in function `mana_create_page_pool.isra.0':
mana_en.c:(.text+0x9ae36f): undefined reference to `page_pool_create'
ld: vmlinux.o: in function `mana_get_rxfrag':
mana_en.c:(.text+0x9afed1): undefined reference to `page_pool_alloc_pages'
make[3]: *** [/home/yury/work/linux/scripts/Makefile.vmlinux:37: vmlinux] Error 1
make[2]: *** [/home/yury/work/linux/Makefile:1154: vmlinux] Error 2
make[1]: *** [/home/yury/work/linux/Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/home/yury/work/build-linux-x86_64'
make: *** [Makefile:234: __sub-make] Error 2
So we need to select it explicitly.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Fixes:
ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/20231215203353.635379-1-yury.norov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Larysa Zaremba [Tue, 12 Dec 2023 09:29:01 +0000 (10:29 +0100)]
ice: Fix PF with enabled XDP going no-carrier after reset
[ Upstream commit
f5728a418945ba53e2fdf38a6e5c5a2670965e85 ]
Commit
6624e780a577fc596788 ("ice: split ice_vsi_setup into smaller
functions") has refactored a bunch of code involved in PFR. In this
process, TC queue number adjustment for XDP was lost. Bring it back.
Lack of such adjustment causes interface to go into no-carrier after a
reset, if XDP program is attached, with the following message:
ice 0000:b1:00.0: Failed to set LAN Tx queue context, error: -22
ice 0000:b1:00.0 ens801f0np0: Failed to open VSI 0x0006 on switch 0x0001
ice 0000:b1:00.0: enable VSI failed, err -22, VSI index 0, type ICE_VSI_PF
ice 0000:b1:00.0: PF VSI rebuild failed: -22
ice 0000:b1:00.0: Rebuild failed, unload and reload driver
Fixes:
6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Ertman [Mon, 11 Dec 2023 21:19:28 +0000 (13:19 -0800)]
ice: alter feature support check for SRIOV and LAG
[ Upstream commit
4d50fcdc2476eef94c14c6761073af5667bb43b6 ]
Previously, the ice driver had support for using a handler for bonding
netdev events to ensure that conflicting features were not allowed to be
activated at the same time. While this was still in place, additional
support was added to specifically support SRIOV and LAG together. These
both utilized the netdev event handler, but the SRIOV and LAG feature was
behind a capabilities feature check to make sure the current NVM has
support.
The exclusion part of the event handler should be removed since there are
users who have custom made solutions that depend on the non-exclusion of
features.
Wrap the creation/registration and cleanup of the event handler and
associated structs in the probe flow with a feature check so that the
only systems that support the full implementation of LAG features will
initialize support. This will leave other systems unhindered with
functionality as it existed before any LAG code was added.
Fixes:
bb52f42acef6 ("ice: Add driver support for firmware changes for LAG")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Keller [Wed, 6 Dec 2023 20:19:05 +0000 (12:19 -0800)]
ice: stop trashing VF VSI aggregator node ID information
[ Upstream commit
7d881346121a97756f34e00e6296a5d63f001f7f ]
When creating new VSIs, they are assigned into an aggregator node in the
scheduler tree. Information about which aggregator node a VSI is assigned
into is maintained by the vsi->agg_node structure. In ice_vsi_decfg(), this
information is being destroyed, by overwriting the valid flag and the
agg_id field to zero.
For VF VSIs, this breaks the aggregator node configuration replay, which
depends on this information. This results in VFs being inserted into the
default aggregator node. The resulting configuration will have unexpected
Tx bandwidth sharing behavior.
This was broken by commit
6624e780a577 ("ice: split ice_vsi_setup into
smaller functions"), which added the block to reset the agg_node data.
The vsi->agg_node structure is not managed by the scheduler code, but is
instead a wrapper around an aggregator node ID that is tracked at the VSI
layer. Its been around for a long time, and its primary purpose was for
handling VFs. The SR-IOV VF reset flow does not make use of the standard VSI
rebuild/replay logic, and uses vsi->agg_node as part of its handling to
rebuild the aggregator node configuration.
The logic for aggregator nodes stretches back to early ice driver code from
commit
b126bd6bcd67 ("ice: create scheduler aggregator node config and move
VSIs")
The logic in ice_vsi_decfg() which trashes the ice_agg_node data is clearly
wrong. It destroys information that is necessary for handling VF reset,. It
is also not the correct way to actually remove a VSI from an aggregator
node. For that, we need to implement logic in the scheduler code. Further,
non-VF VSIs properly replay their aggregator configuration using existing
scheduler replay logic.
To fix the VF replay logic, remove this broken aggregator node cleanup
logic. This is the simplest way to immediately fix this.
This ensures that VFs will have proper aggregate configuration after a
reset. This is especially important since VFs often perform resets as part
of their reconfiguration flows. Without fixing this, VFs will be placed in
the default aggregator node and Tx bandwidth will not be shared in the
expected and configured manner.
Fixes:
6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Golle [Tue, 12 Dec 2023 00:05:35 +0000 (00:05 +0000)]
net: phy: skip LED triggers on PHYs on SFP modules
[ Upstream commit
b1dfc0f76231bbf395c59d20a2070684620d5d0f ]
Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-
20231208+ #0 Tainted: G O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8
but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
cleanup_module+0x2ae0/0x3120 [sfp]
sfp_register_bus+0x5c/0x9c
sfp_register_socket+0x48/0xd4
cleanup_module+0x271c/0x3120 [sfp]
platform_probe+0x64/0xb8
really_probe+0x17c/0x3c0
__driver_probe_device+0x78/0x164
driver_probe_device+0x3c/0xd4
__driver_attach+0xec/0x1f0
bus_for_each_dev+0x60/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x108/0x208
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
init_module+0x28/0xa7c [sfp]
do_one_initcall+0x70/0x2ec
do_init_module+0x54/0x1e4
load_module+0x1b78/0x1c8c
__do_sys_init_module+0x1bc/0x2cc
__arm64_sys_init_module+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #2 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
rtnl_lock+0x18/0x20
set_device_name+0x30/0x130
netdev_trig_activate+0x13c/0x1ac
led_trigger_set+0x118/0x234
led_trigger_write+0x104/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
down_write+0x4c/0x13c
led_trigger_write+0xf8/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #0 (triggers_list_lock){++++}-{3:3}:
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sfp->sm_mutex);
lock(rtnl_mutex);
lock(&sfp->sm_mutex);
lock(triggers_list_lock);
*** DEADLOCK ***
4 locks held by kworker/u8:2/43:
#0:
ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#1:
ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#2:
ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
#3:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-
20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
dump_backtrace+0xa8/0x10c
show_stack+0x14/0x1c
dump_stack_lvl+0x5c/0xa0
dump_stack+0x14/0x1c
print_circular_bug+0x328/0x430
check_noncircular+0x124/0x134
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes:
01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Gospodarek [Thu, 14 Dec 2023 21:31:38 +0000 (13:31 -0800)]
bnxt_en: do not map packet buffers twice
[ Upstream commit
23c93c3b6275a59f2a685f4a693944b53c31df4e ]
Remove double-mapping of DMA buffers as it can prevent page pool entries
from being freed. Mapping is managed by page pool infrastructure and
was previously managed by the driver in __bnxt_alloc_rx_page before
allowing the page pool infrastructure to manage it.
Fixes:
578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20231214213138.98095-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Fri, 8 Dec 2023 22:22:29 +0000 (17:22 -0500)]
Bluetooth: hci_core: Fix hci_conn_hash_lookup_cis
[ Upstream commit
50efc63d1a7a7b9a6ed21adae1b9a7123ec8abc0 ]
hci_conn_hash_lookup_cis shall always match the requested CIG and CIS
ids even when they are unset as otherwise it result in not being able
to bind/connect different sockets to the same address as that would
result in having multiple sockets mapping to the same hci_conn which
doesn't really work and prevents BAP audio configuration such as
AC 6(i) when CIG and CIS are left unset.
Fixes:
c14516faede3 ("Bluetooth: hci_conn: Fix not matching by CIS ID")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 22 Nov 2023 22:17:44 +0000 (23:17 +0100)]
Bluetooth: hci_event: shut up a false-positive warning
[ Upstream commit
a5812c68d849505ea657f653446512b85887f813 ]
Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:
net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.
Add another explicit check for the same condition to make sure gcc sees
this cannot happen.
Fixes:
a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes:
1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ying Hsu [Fri, 10 Nov 2023 01:46:05 +0000 (01:46 +0000)]
Bluetooth: Fix deadlock in vhci_send_frame
[ Upstream commit
769bf60e17ee1a56a81e7c031192c3928312c52e ]
syzbot found a potential circular dependency leading to a deadlock:
-> #3 (&hdev->req_lock){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #2 (rfkill_global_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045
hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622
__vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline]
vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374
vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline]
vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511
call_write_iter include/linux/fs.h:2109 [inline]
new_sync_write fs/read_write.c:509 [inline]
vfs_write+0xaa8/0xcf5 fs/read_write.c:596
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #1 (&data->open_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75
hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989
hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline]
hci_sched_acl net/bluetooth/hci_core.c:3583 [inline]
hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654
process_one_work+0x901/0xfb8 kernel/workqueue.c:2310
worker_thread+0xa67/0x1003 kernel/workqueue.c:2457
kthread+0x36a/0x430 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
-> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3053 [inline]
check_prevs_add kernel/locking/lockdep.c:3172 [inline]
validate_chain kernel/locking/lockdep.c:3787 [inline]
__lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011
lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622
__flush_work+0xee/0x19f kernel/workqueue.c:3090
hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352
hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.
Fixes:
92d4abd66f70 ("Bluetooth: vhci: Fix race when opening vhci device")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Mon, 23 Oct 2023 23:26:23 +0000 (16:26 -0700)]
Bluetooth: Fix not notifying when connection encryption changes
[ Upstream commit
f67eabffb57d0bee379994a18ec5f462b2cbdf86 ]
Some layers such as SMP depend on getting notified about encryption
changes immediately as they only allow certain PDU to be transmitted
over an encrypted link which may cause SMP implementation to reject
valid PDUs received thus causing pairing to fail when it shouldn't.
Fixes:
7aca0ac4792e ("Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 14 Dec 2023 15:27:47 +0000 (15:27 +0000)]
net/rose: fix races in rose_kill_by_device()
[ Upstream commit
64b8bc7d5f1434c636a40bdcfcd42b278d1714be ]
syzbot found an interesting netdev refcounting issue in
net/rose/af_rose.c, thanks to CONFIG_NET_DEV_REFCNT_TRACKER=y [1]
Problem is that rose_kill_by_device() can change rose->device
while other threads do not expect the pointer to be changed.
We have to first collect sockets in a temporary array,
then perform the changes while holding the socket
lock and rose_list_lock spinlock (in this order)
Change rose_release() to also acquire rose_list_lock
before releasing the netdev refcount.
[1]
[ 1185.055088][ T7889] ref_tracker: reference already released.
[ 1185.061476][ T7889] ref_tracker: allocated in:
[ 1185.066081][ T7889] rose_bind+0x4ab/0xd10
[ 1185.070446][ T7889] __sys_bind+0x1ec/0x220
[ 1185.074818][ T7889] __x64_sys_bind+0x72/0xb0
[ 1185.079356][ T7889] do_syscall_64+0x40/0x110
[ 1185.083897][ T7889] entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.089835][ T7889] ref_tracker: freed in:
[ 1185.094088][ T7889] rose_release+0x2f5/0x570
[ 1185.098629][ T7889] __sock_release+0xae/0x260
[ 1185.103262][ T7889] sock_close+0x1c/0x20
[ 1185.107453][ T7889] __fput+0x270/0xbb0
[ 1185.111467][ T7889] task_work_run+0x14d/0x240
[ 1185.116085][ T7889] get_signal+0x106f/0x2790
[ 1185.120622][ T7889] arch_do_signal_or_restart+0x90/0x7f0
[ 1185.126205][ T7889] exit_to_user_mode_prepare+0x121/0x240
[ 1185.131846][ T7889] syscall_exit_to_user_mode+0x1e/0x60
[ 1185.137293][ T7889] do_syscall_64+0x4d/0x110
[ 1185.141783][ T7889] entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.148085][ T7889] ------------[ cut here ]------------
WARNING: CPU: 1 PID: 7889 at lib/ref_tracker.c:255 ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Modules linked in:
CPU: 1 PID: 7889 Comm: syz-executor.2 Not tainted 6.7.0-rc4-syzkaller-00162-g65c95f78917e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Code: 00 44 8b 6b 18 31 ff 44 89 ee e8 21 62 f5 fc 45 85 ed 0f 85 a6 00 00 00 e8 a3 66 f5 fc 48 8b 34 24 48 89 ef e8 27 5f f1 05 90 <0f> 0b 90 bb ea ff ff ff e9 52 fd ff ff e8 84 66 f5 fc 4c 8d 6d 44
RSP: 0018:
ffffc90004917850 EFLAGS:
00010202
RAX:
0000000000000201 RBX:
ffff88802618f4c0 RCX:
0000000000000000
RDX:
0000000000000202 RSI:
ffffffff8accb920 RDI:
0000000000000001
RBP:
ffff8880269ea5b8 R08:
0000000000000001 R09:
fffffbfff23e35f6
R10:
ffffffff91f1afb7 R11:
0000000000000001 R12:
1ffff92000922f0c
R13:
0000000005a2039b R14:
ffff88802618f4d8 R15:
00000000ffffffff
FS:
00007f0a720ef6c0(0000) GS:
ffff8880b9900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f43a819d988 CR3:
0000000076c64000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
netdev_tracker_free include/linux/netdevice.h:4127 [inline]
netdev_put include/linux/netdevice.h:4144 [inline]
netdev_put include/linux/netdevice.h:4140 [inline]
rose_kill_by_device net/rose/af_rose.c:195 [inline]
rose_device_event+0x25d/0x330 net/rose/af_rose.c:218
notifier_call_chain+0xb6/0x3b0 kernel/notifier.c:93
call_netdevice_notifiers_info+0xbe/0x130 net/core/dev.c:1967
call_netdevice_notifiers_extack net/core/dev.c:2005 [inline]
call_netdevice_notifiers net/core/dev.c:2019 [inline]
__dev_notify_flags+0x1f5/0x2e0 net/core/dev.c:8646
dev_change_flags+0x122/0x170 net/core/dev.c:8682
dev_ifsioc+0x9ad/0x1090 net/core/dev_ioctl.c:529
dev_ioctl+0x224/0x1090 net/core/dev_ioctl.c:786
sock_do_ioctl+0x198/0x270 net/socket.c:1234
sock_ioctl+0x22e/0x6b0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f0a7147cba9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f0a720ef0c8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007f0a7159bf80 RCX:
00007f0a7147cba9
RDX:
0000000020000040 RSI:
0000000000008914 RDI:
0000000000000004
RBP:
00007f0a714c847a R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000000000b R14:
00007f0a7159bf80 R15:
00007ffc8bb3a5f8
</TASK>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhipeng Lu [Thu, 14 Dec 2023 13:04:04 +0000 (21:04 +0800)]
ethernet: atheros: fix a memleak in atl1e_setup_ring_resources
[ Upstream commit
309fdb1c33fe726d92d0030481346f24e1b01f07 ]
In the error handling of 'offset > adapter->ring_size', the
tx_ring->tx_buffer allocated by kzalloc should be freed,
instead of 'goto failed' instantly.
Fixes:
a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 14 Dec 2023 11:30:38 +0000 (11:30 +0000)]
net: sched: ife: fix potential use-after-free
[ Upstream commit
19391a2ca98baa7b80279306cdf7dd43f81fa595 ]
ife_decode() calls pskb_may_pull() two times, we need to reload
ifehdr after the second one, or risk use-after-free as reported
by syzbot:
BUG: KASAN: slab-use-after-free in __ife_tlv_meta_valid net/ife/ife.c:108 [inline]
BUG: KASAN: slab-use-after-free in ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
Read of size 2 at addr
ffff88802d7300a4 by task syz-executor.5/22323
CPU: 0 PID: 22323 Comm: syz-executor.5 Not tainted 6.7.0-rc3-syzkaller-00804-g074ac38d5b95 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
__ife_tlv_meta_valid net/ife/ife.c:108 [inline]
ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
tcf_ife_decode net/sched/act_ife.c:739 [inline]
tcf_ife_act+0x4e3/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fe9acc7cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007fe9ada450c8 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00007fe9acd9bf80 RCX:
00007fe9acc7cae9
RDX:
000000000000fce0 RSI:
00000000200002c0 RDI:
0000000000000003
RBP:
00007fe9accc847a R08:
0000000020000140 R09:
0000000000000014
R10:
0000000000000004 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000000000b R14:
00007fe9acd9bf80 R15:
00007ffd5427ae78
</TASK>
Allocated by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0xa2/0xb0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node_track_caller+0x5a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Freed by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
__kmem_cache_free+0xc0/0x180 mm/slub.c:3822
skb_kfree_head net/core/skbuff.c:950 [inline]
skb_free_head+0x110/0x1b0 net/core/skbuff.c:962
pskb_expand_head+0x3c5/0x1170 net/core/skbuff.c:2130
__pskb_pull_tail+0xe1/0x1830 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2685 [inline]
pskb_may_pull include/linux/skbuff.h:2693 [inline]
ife_decode+0x394/0x4f0 net/ife/ife.c:82
tcf_ife_decode net/sched/act_ife.c:727 [inline]
tcf_ife_act+0x43b/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The buggy address belongs to the object at
ffff88802d730000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 164 bytes inside of
freed 8192-byte region [
ffff88802d730000,
ffff88802d732000)
The buggy address belongs to the physical page:
page:
ffffea0000b5cc00 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x2d730
head:
ffffea0000b5cc00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw:
00fff00000000840 ffff888013042280 dead000000000122 0000000000000000
raw:
0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 22323, tgid 22320 (syz-executor.5), ts
950317230369, free_ts
950233467461
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1544
prep_new_page mm/page_alloc.c:1551 [inline]
get_page_from_freelist+0xa28/0x3730 mm/page_alloc.c:3319
__alloc_pages+0x22e/0x2420 mm/page_alloc.c:4575
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab mm/slub.c:2017 [inline]
new_slab+0x283/0x3c0 mm/slub.c:2070
___slab_alloc+0x979/0x1500 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
__kmem_cache_alloc_node+0x131/0x310 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x4a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1144 [inline]
free_unref_page_prepare+0x53c/0xb80 mm/page_alloc.c:2354
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2494
__unfreeze_partials+0x226/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc_lru+0x219/0x6f0 mm/slub.c:3509
alloc_inode_sb include/linux/fs.h:2937 [inline]
ext4_alloc_inode+0x28/0x650 fs/ext4/super.c:1408
alloc_inode+0x5d/0x220 fs/inode.c:261
new_inode_pseudo fs/inode.c:1006 [inline]
new_inode+0x22/0x260 fs/inode.c:1032
__ext4_new_inode+0x333/0x5200 fs/ext4/ialloc.c:958
ext4_symlink+0x5d7/0xa20 fs/ext4/namei.c:3398
vfs_symlink fs/namei.c:4464 [inline]
vfs_symlink+0x3e5/0x620 fs/namei.c:4448
do_symlinkat+0x25f/0x310 fs/namei.c:4490
__do_sys_symlinkat fs/namei.c:4506 [inline]
__se_sys_symlinkat fs/namei.c:4503 [inline]
__x64_sys_symlinkat+0x97/0xc0 fs/namei.c:4503
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
Fixes:
d57493d6d1be ("net: sched: ife: check on metadata length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shigeru Yoshida [Thu, 14 Dec 2023 05:09:22 +0000 (14:09 +0900)]
net: Return error from sk_stream_wait_connect() if sk_wait_event() fails
[ Upstream commit
cac23b7d7627915d967ce25436d7aae26e88ed06 ]
The following NULL pointer dereference issue occurred:
BUG: kernel NULL pointer dereference, address:
0000000000000000
<...>
RIP: 0010:ccid_hc_tx_send_packet net/dccp/ccid.h:166 [inline]
RIP: 0010:dccp_write_xmit+0x49/0x140 net/dccp/output.c:356
<...>
Call Trace:
<TASK>
dccp_sendmsg+0x642/0x7e0 net/dccp/proto.c:801
inet_sendmsg+0x63/0x90 net/ipv4/af_inet.c:846
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x83/0xe0 net/socket.c:745
____sys_sendmsg+0x443/0x510 net/socket.c:2558
___sys_sendmsg+0xe5/0x150 net/socket.c:2612
__sys_sendmsg+0xa6/0x120 net/socket.c:2641
__do_sys_sendmsg net/socket.c:2650 [inline]
__se_sys_sendmsg net/socket.c:2648 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2648
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x43/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
sk_wait_event() returns an error (-EPIPE) if disconnect() is called on the
socket waiting for the event. However, sk_stream_wait_connect() returns
success, i.e. zero, even if sk_wait_event() returns -EPIPE, so a function
that waits for a connection with sk_stream_wait_connect() may misbehave.
In the case of the above DCCP issue, dccp_sendmsg() is waiting for the
connection. If disconnect() is called in concurrently, the above issue
occurs.
This patch fixes the issue by returning error from sk_stream_wait_connect()
if sk_wait_event() fails.
Fixes:
419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: syzbot+c71bc336c5061153b502@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Ghosh [Wed, 13 Dec 2023 18:10:44 +0000 (23:40 +0530)]
octeontx2-pf: Fix graceful exit during PFC configuration failure
[ Upstream commit
8c97ab5448f2096daba11edf8d18a44e1eb6f31d ]
During PFC configuration failure the code was not handling a graceful
exit. This patch fixes the same and add proper code for a graceful exit.
Fixes:
99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Thu, 14 Dec 2023 00:09:02 +0000 (02:09 +0200)]
net: mscc: ocelot: fix pMAC TX RMON stats for bucket 256-511 and above
[ Upstream commit
70f010da00f90415296f93fb47a561977eae41cb ]
The typo from ocelot_port_rmon_stats_cb() was also carried over to
ocelot_port_pmac_rmon_stats_cb() as well, leading to incorrect TX RMON
stats for the pMAC too.
Fixes:
ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Thu, 14 Dec 2023 00:09:01 +0000 (02:09 +0200)]
net: mscc: ocelot: fix eMAC TX RMON stats for bucket 256-511 and above
[ Upstream commit
52eda4641d041667fa059f4855c5f88dcebd8afe ]
There is a typo in the driver due to which we report incorrect TX RMON
counters for the 256-511 octet bucket and all the other buckets larger
than that.
Bug found with the selftest at
https://patchwork.kernel.org/project/netdevbpf/patch/
20231211223346.2497157-9-tobias@waldekranz.com/
Fixes:
e32036e1ae7b ("net: mscc: ocelot: add support for all sorts of standardized counters present in DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Rameshbabu [Tue, 21 Nov 2023 23:00:22 +0000 (15:00 -0800)]
net/mlx5e: Correct snprintf truncation handling for fw_version buffer used by representors
[ Upstream commit
b13559b76157de9d74f04d3ca0e49d69de3b5675 ]
snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.
Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes:
1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Rameshbabu [Tue, 21 Nov 2023 23:00:21 +0000 (15:00 -0800)]
net/mlx5e: Correct snprintf truncation handling for fw_version buffer
[ Upstream commit
ad436b9c1270c40554e274f067f1b78fcc06a004 ]
snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.
Reported-by: David Laight <David.Laight@ACULAB.COM>
Closes: https://lore.kernel.org/netdev/
81cae734ee1b4cde9b380a9a31006c1a@AcuMS.aculab.com/
Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes:
41e63c2baa11 ("net/mlx5e: Check return value of snprintf writing to fw_version buffer")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 13 Dec 2023 14:08:57 +0000 (17:08 +0300)]
net/mlx5e: Fix error codes in alloc_branch_attr()
[ Upstream commit
d792e5f7f19b95f5ce41ac49df5ead4d280238f4 ]
Set the error code if set_branch_dest_ft() fails.
Fixes:
ccbe33003b10 ("net/mlx5e: TC, Don't offload post action rule if not supported")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 13 Dec 2023 14:08:17 +0000 (17:08 +0300)]
net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get()
[ Upstream commit
86d5922679f3b6d02a64df66cdd777fdd4ea5c0d ]
Preserve the error code if esw_add_restore_rule() fails. Don't return
success.
Fixes:
6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Fri, 6 Oct 2023 13:22:22 +0000 (15:22 +0200)]
net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport num
[ Upstream commit
04ad04e4fdd10f92ef4f2b3f6227ec9824682197 ]
Currently the destination rep pointer is only used for comparisons or to
obtain vport number from it. Since it is used both during flow creation and
deletion it may point to representor of another eswitch instance which can
be deallocated during driver unload even when there are rules pointing to
it[0]. Refactor the code to store vport number and 'valid' flag instead of
the representor pointer.
[0]:
[176805.886303] ==================================================================
[176805.889433] BUG: KASAN: slab-use-after-free in esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.892981] Read of size 2 at addr
ffff888155090aa0 by task modprobe/27280
[176805.895462] CPU: 3 PID: 27280 Comm: modprobe Tainted: G B 6.6.0-rc3+ #1
[176805.896771] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[176805.898514] Call Trace:
[176805.899026] <TASK>
[176805.899519] dump_stack_lvl+0x33/0x50
[176805.900221] print_report+0xc2/0x610
[176805.900893] ? mlx5_chains_put_table+0x33d/0x8d0 [mlx5_core]
[176805.901897] ? esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.902852] kasan_report+0xac/0xe0
[176805.903509] ? esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.904461] esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.905223] __mlx5_eswitch_del_rule+0x1ae/0x460 [mlx5_core]
[176805.906044] ? esw_cleanup_dests+0x440/0x440 [mlx5_core]
[176805.906822] ? xas_find_conflict+0x420/0x420
[176805.907496] ? down_read+0x11e/0x200
[176805.908046] mlx5e_tc_rule_unoffload+0xc4/0x2a0 [mlx5_core]
[176805.908844] mlx5e_tc_del_fdb_flow+0x7da/0xb10 [mlx5_core]
[176805.909597] mlx5e_flow_put+0x4b/0x80 [mlx5_core]
[176805.910275] mlx5e_delete_flower+0x5b4/0xb70 [mlx5_core]
[176805.911010] tc_setup_cb_reoffload+0x27/0xb0
[176805.911648] fl_reoffload+0x62d/0x900 [cls_flower]
[176805.912313] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core]
[176805.913151] ? __fl_put+0x230/0x230 [cls_flower]
[176805.913768] ? filter_irq_stacks+0x90/0x90
[176805.914335] ? kasan_save_stack+0x1e/0x40
[176805.914893] ? kasan_set_track+0x21/0x30
[176805.915484] ? kasan_save_free_info+0x27/0x40
[176805.916105] tcf_block_playback_offloads+0x79/0x1f0
[176805.916773] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core]
[176805.917647] tcf_block_unbind+0x12d/0x330
[176805.918239] tcf_block_offload_cmd.isra.0+0x24e/0x320
[176805.918953] ? tcf_block_bind+0x770/0x770
[176805.919551] ? _raw_read_unlock_irqrestore+0x30/0x30
[176805.920236] ? mutex_lock+0x7d/0xd0
[176805.920735] ? mutex_unlock+0x80/0xd0
[176805.921255] tcf_block_offload_unbind+0xa5/0x120
[176805.921909] __tcf_block_put+0xc2/0x2d0
[176805.922467] ingress_destroy+0xf4/0x3d0 [sch_ingress]
[176805.923178] __qdisc_destroy+0x9d/0x280
[176805.923741] dev_shutdown+0x1c6/0x330
[176805.924295] unregister_netdevice_many_notify+0x6ef/0x1500
[176805.925034] ? netdev_freemem+0x50/0x50
[176805.925610] ? _raw_spin_lock_irq+0x7b/0xd0
[176805.926235] ? _raw_spin_lock_bh+0xe0/0xe0
[176805.926849] unregister_netdevice_queue+0x1e0/0x280
[176805.927592] ? unregister_netdevice_many+0x10/0x10
[176805.928275] unregister_netdev+0x18/0x20
[176805.928835] mlx5e_vport_rep_unload+0xc0/0x200 [mlx5_core]
[176805.929608] mlx5_esw_offloads_unload_rep+0x9d/0xc0 [mlx5_core]
[176805.930492] mlx5_eswitch_unload_vf_vports+0x108/0x1a0 [mlx5_core]
[176805.931422] ? mlx5_eswitch_unload_sf_vport+0x50/0x50 [mlx5_core]
[176805.932304] ? rwsem_down_write_slowpath+0x11f0/0x11f0
[176805.932987] mlx5_eswitch_disable_sriov+0x6f9/0xa60 [mlx5_core]
[176805.933807] ? mlx5_core_disable_hca+0xe1/0x130 [mlx5_core]
[176805.934576] ? mlx5_eswitch_disable_locked+0x580/0x580 [mlx5_core]
[176805.935463] mlx5_device_disable_sriov+0x138/0x490 [mlx5_core]
[176805.936308] mlx5_sriov_disable+0x8c/0xb0 [mlx5_core]
[176805.937063] remove_one+0x7f/0x210 [mlx5_core]
[176805.937711] pci_device_remove+0x96/0x1c0
[176805.938289] device_release_driver_internal+0x361/0x520
[176805.938981] ? kobject_put+0x5c/0x330
[176805.939553] driver_detach+0xd7/0x1d0
[176805.940101] bus_remove_driver+0x11f/0x290
[176805.943847] pci_unregister_driver+0x23/0x1f0
[176805.944505] mlx5_cleanup+0xc/0x20 [mlx5_core]
[176805.945189] __x64_sys_delete_module+0x2b3/0x450
[176805.945837] ? module_flags+0x300/0x300
[176805.946377] ? dput+0xc2/0x830
[176805.946848] ? __kasan_record_aux_stack+0x9c/0xb0
[176805.947555] ? __call_rcu_common.constprop.0+0x46c/0xb50
[176805.948338] ? fpregs_assert_state_consistent+0x1d/0xa0
[176805.949055] ? exit_to_user_mode_prepare+0x30/0x120
[176805.949713] do_syscall_64+0x3d/0x90
[176805.950226] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.950904] RIP: 0033:0x7f7f42c3f5ab
[176805.951462] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48
[176805.953710] RSP: 002b:
00007fff07dc9d08 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
[176805.954691] RAX:
ffffffffffffffda RBX:
000055b6e91c01e0 RCX:
00007f7f42c3f5ab
[176805.955691] RDX:
0000000000000000 RSI:
0000000000000800 RDI:
000055b6e91c0248
[176805.956662] RBP:
000055b6e91c01e0 R08:
0000000000000000 R09:
0000000000000000
[176805.957601] R10:
00007f7f42d9eac0 R11:
0000000000000206 R12:
000055b6e91c0248
[176805.958593] R13:
0000000000000000 R14:
000055b6e91bfb38 R15:
0000000000000000
[176805.959599] </TASK>
[176805.960324] Allocated by task 20490:
[176805.960893] kasan_save_stack+0x1e/0x40
[176805.961463] kasan_set_track+0x21/0x30
[176805.962019] __kasan_kmalloc+0x77/0x90
[176805.962554] esw_offloads_init+0x1bb/0x480 [mlx5_core]
[176805.963318] mlx5_eswitch_init+0xc70/0x15c0 [mlx5_core]
[176805.964092] mlx5_init_one_devl_locked+0x366/0x1230 [mlx5_core]
[176805.964902] probe_one+0x6f7/0xc90 [mlx5_core]
[176805.965541] local_pci_probe+0xd7/0x180
[176805.966075] pci_device_probe+0x231/0x6f0
[176805.966631] really_probe+0x1d4/0xb50
[176805.967179] __driver_probe_device+0x18d/0x450
[176805.967810] driver_probe_device+0x49/0x120
[176805.968431] __driver_attach+0x1fb/0x490
[176805.968976] bus_for_each_dev+0xed/0x170
[176805.969560] bus_add_driver+0x21a/0x570
[176805.970124] driver_register+0x133/0x460
[176805.970684] 0xffffffffa0678065
[176805.971180] do_one_initcall+0x92/0x2b0
[176805.971744] do_init_module+0x22d/0x720
[176805.972318] load_module+0x58c3/0x63b0
[176805.972847] init_module_from_file+0xd2/0x130
[176805.973441] __x64_sys_finit_module+0x389/0x7c0
[176805.974045] do_syscall_64+0x3d/0x90
[176805.974556] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.975566] Freed by task 27280:
[176805.976077] kasan_save_stack+0x1e/0x40
[176805.976655] kasan_set_track+0x21/0x30
[176805.977221] kasan_save_free_info+0x27/0x40
[176805.977834] ____kasan_slab_free+0x11a/0x1b0
[176805.978505] __kmem_cache_free+0x163/0x2d0
[176805.979113] esw_offloads_cleanup_reps+0xb8/0x120 [mlx5_core]
[176805.979963] mlx5_eswitch_cleanup+0x182/0x270 [mlx5_core]
[176805.980763] mlx5_cleanup_once+0x9a/0x1e0 [mlx5_core]
[176805.981477] mlx5_uninit_one+0xa9/0x180 [mlx5_core]
[176805.982196] remove_one+0x8f/0x210 [mlx5_core]
[176805.982868] pci_device_remove+0x96/0x1c0
[176805.983461] device_release_driver_internal+0x361/0x520
[176805.984169] driver_detach+0xd7/0x1d0
[176805.984702] bus_remove_driver+0x11f/0x290
[176805.985261] pci_unregister_driver+0x23/0x1f0
[176805.985847] mlx5_cleanup+0xc/0x20 [mlx5_core]
[176805.986483] __x64_sys_delete_module+0x2b3/0x450
[176805.987126] do_syscall_64+0x3d/0x90
[176805.987665] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.988667] Last potentially related work creation:
[176805.989305] kasan_save_stack+0x1e/0x40
[176805.989839] __kasan_record_aux_stack+0x9c/0xb0
[176805.990443] kvfree_call_rcu+0x84/0xa30
[176805.990973] clean_xps_maps+0x265/0x6e0
[176805.991547] netif_reset_xps_queues.part.0+0x3f/0x80
[176805.992226] unregister_netdevice_many_notify+0xfcf/0x1500
[176805.992966] unregister_netdevice_queue+0x1e0/0x280
[176805.993638] unregister_netdev+0x18/0x20
[176805.994205] mlx5e_remove+0xba/0x1e0 [mlx5_core]
[176805.994872] auxiliary_bus_remove+0x52/0x70
[176805.995490] device_release_driver_internal+0x361/0x520
[176805.996196] bus_remove_device+0x1e1/0x3d0
[176805.996767] device_del+0x390/0x980
[176805.997270] mlx5_rescan_drivers_locked.part.0+0x130/0x540 [mlx5_core]
[176805.998195] mlx5_unregister_device+0x77/0xc0 [mlx5_core]
[176805.998989] mlx5_uninit_one+0x41/0x180 [mlx5_core]
[176805.999719] remove_one+0x8f/0x210 [mlx5_core]
[176806.000387] pci_device_remove+0x96/0x1c0
[176806.000938] device_release_driver_internal+0x361/0x520
[176806.001612] unbind_store+0xd8/0xf0
[176806.002108] kernfs_fop_write_iter+0x2c0/0x440
[176806.002748] vfs_write+0x725/0xba0
[176806.003294] ksys_write+0xed/0x1c0
[176806.003823] do_syscall_64+0x3d/0x90
[176806.004357] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176806.005317] The buggy address belongs to the object at
ffff888155090a80
which belongs to the cache kmalloc-64 of size 64
[176806.006774] The buggy address is located 32 bytes inside of
freed 64-byte region [
ffff888155090a80,
ffff888155090ac0)
[176806.008773] The buggy address belongs to the physical page:
[176806.009480] page:
00000000a407e0e6 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x155090
[176806.010633] flags: 0x200000000000800(slab|node=0|zone=2)
[176806.011352] page_type: 0xffffffff()
[176806.011905] raw:
0200000000000800 ffff888100042640 ffffea000422b1c0 dead000000000004
[176806.012949] raw:
0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[176806.013933] page dumped because: kasan: bad access detected
[176806.014935] Memory state around the buggy address:
[176806.015601]
ffff888155090980: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.016568]
ffff888155090a00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.017497] >
ffff888155090a80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.018438] ^
[176806.019007]
ffff888155090b00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.020001]
ffff888155090b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.020996] ==================================================================
Fixes:
a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Moshe Shemesh [Thu, 30 Nov 2023 09:30:34 +0000 (11:30 +0200)]
net/mlx5: Fix fw tracer first block check
[ Upstream commit
4261edf11cb7c9224af713a102e5616329306932 ]
While handling new traces, to verify it is not the first block being
written, last_timestamp is checked. But instead of checking it is non
zero it is verified to be zero. Fix to verify last_timestamp is not
zero.
Fixes:
c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Carolina Jubran [Thu, 23 Nov 2023 14:11:20 +0000 (16:11 +0200)]
net/mlx5e: XDP, Drop fragmented packets larger than MTU size
[ Upstream commit
bcaf109f794744c14da0e9123b31d1f4571b0a35 ]
XDP transmits fragmented packets that are larger than MTU size instead of
dropping those packets. The drop check that checks whether a packet is larger
than MTU is comparing MTU size against the linear part length only.
Adjust the drop check to compare MTU size against both linear and non-linear
part lengths to avoid transmitting fragmented packets larger than MTU size.
Fixes:
39a1665d16a2 ("net/mlx5e: Implement sending multi buffer XDP frames")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Mi [Wed, 29 Nov 2023 02:53:32 +0000 (04:53 +0200)]
net/mlx5e: Decrease num_block_tc when unblock tc offload
[ Upstream commit
be86106fd74a145f24c56c9bc18d658e8fe6d4f4 ]
The cited commit increases num_block_tc when unblock tc offload.
Actually should decrease it.
Fixes:
c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jianbo Liu [Tue, 14 Nov 2023 01:25:21 +0000 (01:25 +0000)]
net/mlx5e: Fix overrun reported by coverity
[ Upstream commit
da75fa542873e5f7d7f615566c0b00042d8a0437 ]
Coverity Scan reports the following issue. But it's impossible that
mlx5_get_dev_index returns 7 for PF, even if the index is calculated
from PCI FUNC ID. So add the checking to make coverity slience.
CID 610894 (#2 of 2): Out-of-bounds write (OVERRUN)
Overrunning array esw->fdb_table.offloads.peer_miss_rules of 4 8-byte
elements at element index 7 (byte offset 63) using index
mlx5_get_dev_index(peer_dev) (which evaluates to 7).
Fixes:
9bee385a6e39 ("net/mlx5: E-switch, refactor FDB miss rule add/remove")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Tue, 28 Nov 2023 09:40:53 +0000 (17:40 +0800)]
net/mlx5e: fix a potential double-free in fs_udp_create_groups
[ Upstream commit
e75efc6466ae289e599fb12a5a86545dff245c65 ]
When kcalloc() for ft->g succeeds but kvzalloc() for in fails,
fs_udp_create_groups() will free ft->g. However, its caller
fs_udp_create_table() will free ft->g again through calling
mlx5e_destroy_flow_table(), which will lead to a double-free.
Fix this by setting ft->g to NULL in fs_udp_create_groups().
Fixes:
1c80bd684388 ("net/mlx5e: Introduce Flow Steering UDP API")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shifeng Li [Sat, 2 Dec 2023 08:01:26 +0000 (00:01 -0800)]
net/mlx5e: Fix a race in command alloc flow
[ Upstream commit
8f5100da56b3980276234e812ce98d8f075194cd ]
Fix a cmd->ent use after free due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process allocated a ent->idx but didn't set ent to cmd->ent_arr in
cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into
the spin lock.
[70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core]
[70013.081967] Write of size 4 at addr
ffff88880b1510b4 by task kworker/26:1/1433361
[70013.081968]
[70013.082028] Workqueue: events aer_isr
[70013.082053] Call Trace:
[70013.082067] dump_stack+0x8b/0xbb
[70013.082086] print_address_description+0x6a/0x270
[70013.082102] kasan_report+0x179/0x2c0
[70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core]
[70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core]
[70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core]
[70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core]
[70013.082377] remove_one+0x200/0x2b0 [mlx5_core]
[70013.082409] pci_device_remove+0xf3/0x280
[70013.082439] device_release_driver_internal+0x1c3/0x470
[70013.082453] pci_stop_bus_device+0x109/0x160
[70013.082468] pci_stop_and_remove_bus_device+0xe/0x20
[70013.082485] pcie_do_fatal_recovery+0x167/0x550
[70013.082493] aer_isr+0x7d2/0x960
[70013.082543] process_one_work+0x65f/0x12d0
[70013.082556] worker_thread+0x87/0xb50
[70013.082571] kthread+0x2e9/0x3a0
[70013.082592] ret_from_fork+0x1f/0x40
The logical relationship of this error is as follows:
aer_recover_work | ent->work
-------------------------------------------+------------------------------
aer_recover_work_func |
|- pcie_do_recovery |
|- report_error_detected |
|- mlx5_pci_err_detected |cmd_work_handler
|- mlx5_enter_error_state | |- cmd_alloc_index
|- enter_error_state | |- lock cmd->alloc_lock
|- mlx5_cmd_flush | |- clear_bit
|- mlx5_cmd_trigger_completions| |- unlock cmd->alloc_lock
|- lock cmd->alloc_lock |
|- vector = ~dev->cmd.vars.bitmask
|- for_each_set_bit |
|- cmd_ent_get(cmd->ent_arr[i]) (UAF)
|- unlock cmd->alloc_lock | |- cmd->ent_arr[ent->idx]=ent
The cmd->ent_arr[ent->idx] assignment and the bit clearing are not
protected by the cmd->alloc_lock in cmd_work_handler().
Fixes:
50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shifeng Li [Thu, 30 Nov 2023 09:46:56 +0000 (01:46 -0800)]
net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()
[ Upstream commit
ddb38ddff9c71026bad481b791a94d446ee37603 ]
Out_sz that the size of out buffer is calculated using query_nic_vport
_context_in structure when driver query the MAC list. However query_nic
_vport_context_in structure is smaller than query_nic_vport_context_out.
When allowed_list_size is greater than 96, calling ether_addr_copy() will
trigger an slab-out-of-bounds.
[ 1170.055866] BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core]
[ 1170.055869] Read of size 4 at addr
ffff88bdbc57d912 by task kworker/u128:1/461
[ 1170.055870]
[ 1170.055932] Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
[ 1170.055936] Call Trace:
[ 1170.055949] dump_stack+0x8b/0xbb
[ 1170.055958] print_address_description+0x6a/0x270
[ 1170.055961] kasan_report+0x179/0x2c0
[ 1170.056061] mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core]
[ 1170.056162] esw_update_vport_addr_list+0x2c5/0xcd0 [mlx5_core]
[ 1170.056257] esw_vport_change_handle_locked+0xd08/0x1a20 [mlx5_core]
[ 1170.056377] esw_vport_change_handler+0x6b/0x90 [mlx5_core]
[ 1170.056381] process_one_work+0x65f/0x12d0
[ 1170.056383] worker_thread+0x87/0xb50
[ 1170.056390] kthread+0x2e9/0x3a0
[ 1170.056394] ret_from_fork+0x1f/0x40
Fixes:
e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists")
Cc: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Tue, 21 Nov 2023 12:52:28 +0000 (13:52 +0100)]
Revert "net/mlx5e: fix double free of encap_header"
[ Upstream commit
5d089684dc434a31e08d32f0530066d0025c52e4 ]
This reverts commit
6f9b1a0731662648949a1c0587f6acb3b7f8acf1.
This patch is causing a null ptr issue, the proper fix is in the next
patch.
Fixes:
6f9b1a073166 ("net/mlx5e: fix double free of encap_header")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Tue, 21 Nov 2023 12:51:52 +0000 (13:51 +0100)]
Revert "net/mlx5e: fix double free of encap_header in update funcs"
[ Upstream commit
66ca8d4deca09bce3fc7bcf8ea7997fa1a51c33c ]
This reverts commit
3a4aa3cb83563df942be49d145ee3b7ddf17d6bb.
This patch is causing a null ptr issue, the proper fix is in the next
patch.
Fixes:
3a4aa3cb8356 ("net/mlx5e: fix double free of encap_header in update funcs")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Fastabend [Fri, 1 Dec 2023 18:01:38 +0000 (10:01 -0800)]
bpf: syzkaller found null ptr deref in unix_bpf proto add
[ Upstream commit
8d6650646ce49e9a5b8c5c23eb94f74b1749f70f ]
I added logic to track the sock pair for stream_unix sockets so that we
ensure lifetime of the sock matches the time a sockmap could reference
the sock (see fixes tag). I forgot though that we allow af_unix unconnected
sockets into a sock{map|hash} map.
This is problematic because previous fixed expected sk_pair() to exist
and did not NULL check it. Because unconnected sockets have a NULL
sk_pair this resulted in the NULL ptr dereference found by syzkaller.
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
Write of size 4 at addr
0000000000000080 by task syz-executor360/5073
Call Trace:
<TASK>
...
sock_hold include/net/sock.h:777 [inline]
unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
sock_map_init_proto net/core/sock_map.c:190 [inline]
sock_map_link+0xb87/0x1100 net/core/sock_map.c:294
sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483
sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577
bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167
We considered just checking for the null ptr and skipping taking a ref
on the NULL peer sock. But, if the socket is then connected() after
being added to the sockmap we can cause the original issue again. So
instead this patch blocks adding af_unix sockets that are not in the
ESTABLISHED state.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e8030702aefd3444fb9e@syzkaller.appspotmail.com
Fixes:
8866730aed51 ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231201180139.328529-2-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Schmidt [Thu, 30 Nov 2023 16:58:06 +0000 (17:58 +0100)]
ice: fix theoretical out-of-bounds access in ethtool link modes
[ Upstream commit
91f9181c738101a276d9da333e0ab665ad806e6d ]
To map phy types reported by the hardware to ethtool link mode bits,
ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup).
The "low" table has 64 elements to cover every possible bit the hardware
may report, but the "high" table has only 13. If the hardware reports a
higher bit in phy_types_high, the driver would access memory beyond the
lookup table's end.
Instead of iterating through all 64 bits of phy_types_{low,high}, use
the sizes of the respective lookup tables.
Fixes:
9136e1f1e5c3 ("ice: refactor PHY type to ethtool link mode")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Mon, 11 Dec 2023 07:05:31 +0000 (09:05 +0200)]
wifi: mac80211: mesh_plink: fix matches_local logic
[ Upstream commit
8c386b166e2517cf3a123018e77941ec22625d0f ]
During refactoring the "else" here got lost, add it back.
Fixes:
c99a89edb106 ("mac80211: factor out plink event gathering")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.795480fa0e0b.I017d501196a5bbdcd9afd33338d342d6fe1edd79@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Mon, 11 Dec 2023 07:05:32 +0000 (09:05 +0200)]
wifi: mac80211: mesh: check element parsing succeeded
[ Upstream commit
1fc4a3eec50d726f4663ad3c0bb0158354d6647a ]
ieee802_11_parse_elems() can return NULL, so we must
check for the return value.
Fixes:
5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.93dea364f3d3.Ie87781c6c48979fb25a744b90af4a33dc2d83a28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Mon, 11 Dec 2023 07:05:30 +0000 (09:05 +0200)]
wifi: mac80211: check defragmentation succeeded
[ Upstream commit
98849ba2aa9db46e62720fb686a9d63ed9887806 ]
We need to check that cfg80211_defragment_element()
didn't return an error, since it can fail due to bad
input, and we didn't catch that before.
Fixes:
8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.8595a6b67fc0.I1225edd8f98355e007f96502e358e476c7971d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Mon, 11 Dec 2023 07:05:19 +0000 (09:05 +0200)]
wifi: mac80211: don't re-add debugfs during reconfig
[ Upstream commit
63bafd9d5421959b2124dd940ed8d7462d99f449 ]
If we're doing reconfig, then we cannot add the debugfs
files that are already there from before the reconfig.
Skip that in drv_change_sta_links() during reconfig.
Fixes:
d2caad527c19 ("wifi: mac80211: add API to show the link STAs in debugfs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.88a950f43e16.Id71181780994649219685887c0fcad33d387cc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Adam Davis [Wed, 29 Nov 2023 12:17:47 +0000 (20:17 +0800)]
wifi: mac80211: check if the existing link config remains unchanged
[ Upstream commit
c1393c132b906fbdf91f6d1c9eb2ef7a00cce64e ]
[Syz report]
WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Modules linked in:
CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3
RSP: 0018:
ffffc90003c57248 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
ffff888016bc4000 RCX:
ffffffff89f7d519
RDX:
ffff888076d43b80 RSI:
ffffffff89f7d6df RDI:
0000000000000005
RBP:
ffff88801daaae20 R08:
0000000000000005 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000002 R12:
0000000000000001
R13:
0000000000000000 R14:
ffff888020030e20 R15:
ffff888078f08000
FS:
0000555556b94380(0000) GS:
ffff8880b9900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000005fdeb8 CR3:
0000000076d22000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674
sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002
ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068
rdev_add_station net/wireless/rdev-ops.h:201 [inline]
nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
[Analysis]
It is inappropriate to make a link configuration change judgment on an
non-existent and non new link.
[Fix]
Quickly exit when there is a existent link and the link configuration has not
changed.
Fixes:
b303835dabe0 ("wifi: mac80211: accept STA changes without link changes")
Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Fri, 8 Dec 2023 16:32:02 +0000 (18:32 +0200)]
wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lock
[ Upstream commit
a4754182dc936b97ec7e9f6b08cdf7ed97ef9069 ]
Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq->lock as well.
Fixes:
25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 6 Dec 2023 21:37:57 +0000 (22:37 +0100)]
wifi: ieee80211: don't require protected vendor action frames
[ Upstream commit
98fb9b9680c9f3895ced02d6a73e27f5d7b5892b ]
For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.
Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.
Fixes:
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Mon, 18 Dec 2023 22:05:40 +0000 (17:05 -0500)]
SUNRPC: Revert
5f7fc5d69f6e92ec0b38774c387f5cf7812c5806
[ Upstream commit
bd018b98ba84ca0c80abac1ef23ce726a809e58c ]
Guillaume says:
> I believe commit
5f7fc5d69f6e ("SUNRPC: Resupply rq_pages from
> node-local memory") in Linux 6.5+ is incorrect. It passes
> unconditionally rq_pool->sp_id as the NUMA node.
>
> While the comment in the svc_pool declaration in sunrpc/svc.h says
> that sp_id is also the NUMA node id, it might not be the case if
> the svc is created using svc_create_pooled(). svc_created_pooled()
> can use the per-cpu pool mode therefore in this case sp_id would
> be the cpu id.
Fix this by reverting now. At a later point this minor optimization,
and the deceptive labeling of the sp_id field, can be revisited.
Reported-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/linux-nfs/ZYC9rsno8qYggVt9@bender.morinfr.org/T/#u
Fixes:
5f7fc5d69f6e ("SUNRPC: Resupply rq_pages from node-local memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rajvi Jingar [Sat, 16 Dec 2023 01:16:50 +0000 (17:16 -0800)]
platform/x86/intel/pmc: Fix hang in pmc_core_send_ltr_ignore()
[ Upstream commit
fbcf67ce5a9e2831c14bdfb895be05213e611724 ]
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Fixes:
2bcef4529222 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Fri, 8 Dec 2023 14:03:15 +0000 (15:03 +0100)]
s390/vx: fix save/restore of fpu kernel context
[ Upstream commit
e6b2dab41888332bf83f592131e7ea07756770a4 ]
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes:
7f79695cc1b6 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 29 Nov 2023 16:55:33 +0000 (17:55 +0100)]
reset: Fix crash when freeing non-existent optional resets
[ Upstream commit
4a6756f56bcf8e64c87144a626ce53aea4899c0e ]
When obtaining one or more optional resets, non-existent resets are
stored as NULL pointers, and all related error and cleanup paths need to
take this into account.
Currently only reset_control_put() and reset_control_bulk_put()
get this right. All of __reset_control_bulk_get(),
of_reset_control_array_get(), and reset_control_array_put() lack the
proper checking, causing NULL pointer dereferences on failure or
release.
Fix this by moving the existing check from reset_control_bulk_put() to
__reset_control_put_internal(), so it applies to all callers.
The double check in reset_control_put() doesn't hurt.
Fixes:
17c82e206d2a3cd8 ("reset: Add APIs to manage array of resets")
Fixes:
48d71395896d54ee ("reset: Add reset_control_bulk API")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2440edae7ca8534628cdbaf559ded288f2998178.1701276806.git.geert+renesas@glider.be
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunwu Chan [Thu, 23 Nov 2023 14:52:37 +0000 (22:52 +0800)]
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
[ Upstream commit
c72b9c33ef9695ad7ce7a6eb39a9df8a01b70796 ]
kasprintf() returns a pointer to dynamically allocated memory which can
be NULL upon failure. When 'soc_dev_attr->family' is NULL,it'll trigger
the null pointer dereference issue, such as in 'soc_info_show'.
And when 'soc_device_register' fails, it's necessary to release
'soc_dev_attr->family' to avoid memory leaks.
Fixes:
6770b2114325 ("ARM: OMAP2+: Export SoC information to userspace")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Message-ID: <
20231123145237.609442-1-chentao@kylinos.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Davis [Mon, 13 Nov 2023 18:16:04 +0000 (12:16 -0600)]
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
[ Upstream commit
1e5caee2ba8f1426e8098afb4ca38dc40a0ca71b ]
This node can access any part of the L3 configuration registers space,
including CLK1 and CLK2 which are 0x800000 offset. Restore this area
size to include these areas.
Fixes:
7f2659ce657e ("ARM: dts: Move dra7 l3 noc to a separate node")
Signed-off-by: Andrew Davis <afd@ti.com>
Message-ID: <
20231113181604.546444-1-afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chukun Pan [Sun, 29 Oct 2023 07:40:09 +0000 (15:40 +0800)]
arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3
[ Upstream commit
b9622937d95809ef89904583191571a9fa326402 ]
The current emac setting is not suitable for Orange Pi Zero 3,
move it back to Orange Pi Zero 2 DT. Also update phy mode and
delay values for emac on Orange Pi Zero 3.
With these changes, Ethernet now looks stable.
Fixes:
322bf103204b ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Bigler [Sat, 9 Dec 2023 22:23:26 +0000 (23:23 +0100)]
spi: spi-imx: correctly configure burst length when using dma
[ Upstream commit
e9b220aeacf109684cce36a94fc24ed37be92b05 ]
If DMA is used, burst length should be set to the bus width of the DMA.
Otherwise, the SPI hardware will transmit/receive one word per DMA
request.
Since this issue affects both transmission and reception, it cannot be
detected with a loopback test.
Replace magic numbers 512 and 0xfff with MX51_ECSPI_CTRL_MAX_BURST.
Reported-by Stefan Bigler <linux@bigler.io>
Signed-off-by: Benjamin Bigler <benjamin@bigler.one>
Fixes:
15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Link: https://lore.kernel.org/r/8a415902c751cdbb4b20ce76569216ed@mail.infomaniak.com
Link: https://lore.kernel.org/r/20231209222338.5564-1-benjamin@bigler.one
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lingkai Dong [Wed, 6 Dec 2023 13:51:58 +0000 (13:51 +0000)]
drm: Fix FD ownership check in drm_master_check_perm()
[ Upstream commit
5a6c9a05e55cb2972396cc991af9d74c8c15029a ]
The DRM subsystem keeps a record of the owner of a DRM device file
descriptor using thread group ID (TGID) instead of process ID (PID), to
ensures all threads within the same userspace process are considered the
owner. However, the DRM master ownership check compares the current
thread's PID against the record, so the thread is incorrectly considered to
be not the FD owner if the PID is not equal to the TGID. This causes DRM
ioctls to be denied master privileges, even if the same thread that opened
the FD performs an ioctl. Fix this by checking TGID.
Fixes:
4230cea89cafb ("drm: Track clients by tgid and not tid")
Signed-off-by: Lingkai Dong <lingkai.dong@arm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/PA6PR08MB107665920BE9A96658CDA04CE8884A@PA6PR08MB10766.eurprd08.prod.outlook.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tvrtko Ursulin [Wed, 21 Jun 2023 09:48:24 +0000 (10:48 +0100)]
drm: Update file owner during use
[ Upstream commit
1c7a387ffef894b1ab3942f0482dac7a6e0a909c ]
With the typical model where the display server opens the file descriptor
and then hands it over to the client(*), we were showing stale data in
debugfs.
Fix it by updating the drm_file->pid on ioctl access from a different
process.
The field is also made RCU protected to allow for lockless readers. Update
side is protected with dev->filelist_mutex.
Before:
$ cat /sys/kernel/debug/dri/0/clients
command pid dev master a uid magic
Xorg 2344 0 y y 0 0
Xorg 2344 0 n y 0 2
Xorg 2344 0 n y 0 3
Xorg 2344 0 n y 0 4
After:
$ cat /sys/kernel/debug/dri/0/clients
command tgid dev master a uid magic
Xorg 830 0 y y 0 0
xfce4-session 880 0 n y 0 1
xfwm4 943 0 n y 0 2
neverball 1095 0 n y 0 3
*)
More detailed and historically accurate description of various handover
implementation kindly provided by Emil Velikov:
"""
The traditional model, the server was the orchestrator managing the
primary device node. From the fd, to the master status and
authentication. But looking at the fd alone, this has varied across
the years.
IIRC in the DRI1 days, Xorg (libdrm really) would have a list of open
fd(s) and reuse those whenever needed, DRI2 the client was responsible
for open() themselves and with DRI3 the fd was passed to the client.
Around the inception of DRI3 and systemd-logind, the latter became
another possible orchestrator. Whereby Xorg and Wayland compositors
could ask it for the fd. For various reasons (hysterical and genuine
ones) Xorg has a fallback path going the open(), whereas Wayland
compositors are moving to solely relying on logind... some never had
fallback even.
Over the past few years, more projects have emerged which provide
functionality similar (be that on API level, Dbus, or otherwise) to
systemd-logind.
"""
v2:
* Fixed typo in commit text and added a fine historical explanation
from Emil.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621094824.2348732-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Stable-dep-of:
5a6c9a05e55c ("drm: Fix FD ownership check in drm_master_check_perm()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jani Nikula [Tue, 5 Dec 2023 18:05:51 +0000 (20:05 +0200)]
drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select
[ Upstream commit
e6861d8264cd43c5eb20196e53df36fd71ec5698 ]
The eDP 1.5 spec adds a clarification for eDP 1.4x:
> For eDP v1.4x, if the Source device chooses the Main-Link rate by way
> of DPCD 00100h, the Sink device shall ignore DPCD 00115h[2:0].
We write 0 to DP_LINK_BW_SET (DPCD 100h) even when using
DP_LINK_RATE_SET (DPCD 114h). Stop doing that, as it can cause the panel
to ignore the rate set method.
Moreover, 0 is a reserved value for DP_LINK_BW_SET, and should not be
used.
v2: Improve the comments (Ville)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9081
Tested-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205180551.2476228-1-jani.nikula@intel.com
(cherry picked from commit
23b392b94acb0499f69706c5808c099f590ebcf4)
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Wed, 3 May 2023 11:36:59 +0000 (14:36 +0300)]
drm/i915: Introduce crtc_state->enhanced_framing
[ Upstream commit
3072a24c778a7102d70692af5556e47363114c67 ]
Track DP enhanced framing properly in the crtc state instead
of relying just on the cached DPCD everywhere, and hook it
up into the state check and dump.
v2: Actually set enhanced_framing in .compute_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Stable-dep-of:
e6861d8264cd ("drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Tue, 2 May 2023 14:39:01 +0000 (17:39 +0300)]
drm/i915: Fix FEC state dump
[ Upstream commit
3dfeb80b308882cc6e1f5f6c36fd9a7f4cae5fc6 ]
Stop dumping state while reading it out. We have a proper
place for that stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-7-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Stable-dep-of:
e6861d8264cd ("drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hamza Mahfooz [Tue, 5 Dec 2023 19:55:04 +0000 (14:55 -0500)]
drm/amd/display: fix hw rotated modes when PSR-SU is enabled
[ Upstream commit
f528ee145bd0076cd0ed7e7b2d435893e6329e98 ]
We currently don't support dirty rectangles on hardware rotated modes.
So, if a user is using hardware rotated modes with PSR-SU enabled,
use PSR-SU FFU for all rotated planes (including cursor planes).
Cc: stable@vger.kernel.org
Fixes:
30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2952
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Bin Li <binli@gnome.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Boris Burkov [Fri, 1 Dec 2023 21:00:11 +0000 (13:00 -0800)]
btrfs: free qgroup pertrans reserve on transaction abort
[ Upstream commit
b321a52cce062ec7ed385333a33905d22159ce36 ]
If we abort a transaction, we never run the code that frees the pertrans
qgroup reservation. This results in warnings on unmount as that
reservation has been leaked. The leak isn't a huge issue since the fs is
read-only, but it's better to clean it up when we know we can/should. Do
it during the cleanup_transaction step of aborting.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Sat, 2 Sep 2023 00:13:54 +0000 (08:13 +0800)]
btrfs: qgroup: use qgroup_iterator in qgroup_convert_meta()
[ Upstream commit
0913445082496c2b29668ee26521401b273838b8 ]
With the new qgroup_iterator_add() and qgroup_iterator_clean(), we can
get rid of the ulist and its GFP_ATOMIC memory allocation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of:
b321a52cce06 ("btrfs: free qgroup pertrans reserve on transaction abort")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Sat, 2 Sep 2023 00:13:52 +0000 (08:13 +0800)]
btrfs: qgroup: iterate qgroups without memory allocation for qgroup_reserve()
[ Upstream commit
686c4a5a42635e0d2889e3eb461c554fd0b616b4 ]
Qgroup heavily relies on ulist to go through all the involved
qgroups, but since we're using ulist inside fs_info->qgroup_lock
spinlock, this means we're doing a lot of GFP_ATOMIC allocations.
This patch reduces the GFP_ATOMIC usage for qgroup_reserve() by
eliminating the memory allocation completely.
This is done by moving the needed memory to btrfs_qgroup::iterator
list_head, so that we can put all the involved qgroup into a on-stack
list, thus eliminating the need to allocate memory while holding
spinlock.
The only cost is the slightly higher memory usage, but considering the
reduce GFP_ATOMIC during a hot path, it should still be acceptable.
Function qgroup_reserve() is the perfect start point for this
conversion.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of:
b321a52cce06 ("btrfs: free qgroup pertrans reserve on transaction abort")
Signed-off-by: Sasha Levin <sashal@kernel.org>