review.tizen.org Git - platform/kernel/linux-rpi.git/log

iio: gyro: adxrs290: fix data signedness

commit fde272e78e004a45c7e4976876277d7e6a5a0ede upstream.

Properly sign-extend the rate and temperature data.

Fixes: 2c8920fff1457 ("iio: gyro: Add driver support for ADXRS290")
Signed-off-by: Kister Genesis Jimenez <kister.jimenez@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115104147.18669-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: avoid race between disable slot command and host runtime suspend

commit 7faac1953ed1f658f719cdf7bb7303fa5eef822c upstream.

Make xhci_disable_slot() synchronous, thus ensuring it, and
xhci_free_dev() calling it return after xHC controller completes
the disable slot command.

Otherwise the roothub and xHC host may runtime suspend, and clear the
command ring while the disable slot command is being processed.

This causes a command completion mismatch as the completion event can't
be mapped to the correct command.
Command ring gets out of sync and commands time out.
Driver finally assumes host is unresponsive and bails out.

usb 2-4: USB disconnect, device number 10
xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event
...
xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:0d.0: HC died; cleaning up

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: config: using bit mask instead of individual bits

commit ca5737396927afd4d57b133fd2874bbcf3421cdb upstream.

Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending

commit 811ae81320da53a5670c36970cefacca8519f90e upstream.

When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume
routine also resets the controller.

This is bad for USB drivers without reset_resume callback, because
there's no subsequent call of usb_dev_complete() ->
usb_resume_complete() to force rebinding the driver to the device. For
instance, btusb device stops working after xHCI controller is runtime
resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME.

So always take XHCI_RESET_ON_RESUME into account to solve the issue.

Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: config: fix validation of wMaxPacketValue entries

commit 1a3910c80966e4a76b25ce812f6bea0ef1b1d530 upstream.

The checks performed by commit aed9d65ac327 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.

Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"

commit 6a97cee39d8f2ed4d6e35a09a302dae1d566db36 upstream.

This reverts commit cefdd52fa0455c0555c30927386ee466a108b060.

On sc7180-trogdor class devices with 'fw_devlink=permissive' and KASAN
enabled, you'll see a Use-After-Free reported at bootup.

The root of the problem is that dwc3_qcom_of_register_core() is adding
a devm-allocated "tx-fifo-resize" property to its device tree node
using of_add_property().

The issue is that of_add_property() makes a _permanent_ addition to
the device tree that lasts until reboot. That means allocating memory
for the property using "devm" managed memory is a terrible idea since
that memory will be freed upon probe deferral or device unbinding.

Let's revert the patch since the system is still functional without
it. The fact that of_add_property() makes a permanent change is extra
fodder for those folks who were aruging that the device tree isn't
really the right way to pass information between parts of the
driver. It is an exercise left to the reader to submit a patch
re-adding the new feature in a way that makes everyone happier.

Fixes: cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20211207094327.1.Ie3cde3443039342e2963262a4c3ac36dc2c08b30@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: zero allocate endpoint 0 buffers

commit 86ebbc11bb3f60908a51f3e41a17e3f477c2eaa3 upstream.

Under some conditions, USB gadget devices can show allocated buffer
contents to a host. Fix this up by zero-allocating them so that any
extra data will all just be zeros.

Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: detect too-big endpoint 0 requests

commit 153a2d7e3350cc89d406ba2d35be8793a64c2038 upstream.

Sometimes USB hosts can ask for buffers that are too large from endpoint
0, which should not be allowed. If this happens for OUT requests, stall
the endpoint, but for IN requests, trim the request size to the endpoint
buffer size.

Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/fib_tests: Rework fib_rp_filter_test()

commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.

Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing.  ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.

For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails.  Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.

These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device.  The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail.  See [2] .

Fixing the tests while keeping everything in one netns turns out to be
nontrivial.  Rework the tests and build the following topology:

┌─────────────────────────────┐    ┌─────────────────────────────┐
│  network namespace 1 (ns1)  │    │  network namespace 2 (ns2)  │
│                             │    │                             │
│  ┌────┐     ┌─────┐         │    │  ┌─────┐            ┌────┐  │
│  │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │  │
│  └────┘     ├─────┴──────┐  │    │  ├─────┴──────┐     └────┘  │
│             │192.0.2.1/24│  │    │  │192.0.2.1/24│             │
│             └────────────┘  │    │  └────────────┘             │
└─────────────────────────────┘    └─────────────────────────────┘

Consider sending an ICMP_ECHO packet A in ns2.  Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:

  1. A is routed to lo since its destination IP address is one of ns2's
     local addresses (veth2);
  2. A is redirected from lo's egress to veth2's egress using mirred;
  3. A arrives at veth1's ingress in ns1;
  4. A is redirected from veth1's ingress to lo's ingress, again, using
     mirred;
  5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
     since A was received on lo, but reverse path lookup says veth1;
  6. However A is not dropped since we have relaxed this check for lo in
     commit 66f8209547cc ("fib: relax source validation check for loopback
     packets");

Making sure A is not dropped here in this corner case is the whole point
of having this test.

  7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
     generated;
  8. Similarly, B is redirected from lo's egress to veth1's egress (in
     ns1), then redirected once again from veth2's ingress to lo's
     ingress (in ns2), using mirred.

Also test "ping 127.0.0.1" from ns2.  It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.

Tested with ping from iputils 20210722-41-gf9fb573:

$ ./fib_tests.sh -t rp_filter

IPv4 rp_filter tests
    TEST: rp_filter passes local packets [ OK ]
    TEST: rp_filter passes loopback packets [ OK ]

[1] https://github.com/iputils/iputils/issues/55
[2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/qla3xxx: fix an error code in ql_adapter_up()

commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream.

The ql_wait_for_drvr_lock() fails and returns false, then this
function should return an error code instead of returning success.

The other problem is that the success path prints an error message
netdev_err(ndev, "Releasing driver lock\n"); Delete that and
re-order the code a little to make it more clear.

Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211207082416.GA16110@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, neigh: clear whole pneigh_entry at alloc time

commit e195e9b5dee6459d8c8e6a314cc71a644a0537fd upstream.

Commit 2c611ad97a82 ("net, neigh: Extend neigh->flags to 32 bit
to allow for extensions") enables a new KMSAM warning [1]

I think the bug is actually older, because the following intruction
only occurred if ndm->ndm_flags had NTF_PROXY set.

pn->flags = ndm->ndm_flags;

Let's clear all pneigh_entry fields at alloc time.

[1]
BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_dump_table net/core/neighbour.c:2715 [inline]
neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832
netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
call_write_iter include/linux/fs.h:2162 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0x1318/0x2030 fs/read_write.c:590
ksys_write+0x28c/0x520 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
slab_alloc mm/slub.c:3259 [inline]
__kmalloc+0xc3c/0x12d0 mm/slub.c:4437
kmalloc include/linux/slab.h:595 [inline]
pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766
arp_req_set_public net/ipv4/arp.c:1016 [inline]
arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032
arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232
inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947
sock_do_ioctl net/socket.c:1118 [inline]
sock_ioctl+0xa3f/0x13e0 net/socket.c:1235
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860
__x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()

commit b5bd95d17102b6719e3531d627875b9690371383 upstream.

Background:
We have a customer is running a Profinet stack on the 8MM which receives and
responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from
time to time the received PNIO-CM package is "stock" and is only handled when
receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and
the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from
the expected 40 ms and not the 2s delay of the DCERPC-Ping).

After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would
be handled by different RX queues.

The root cause should be driver ack all queues' interrupt when handle a
specific queue in fec_enet_rx_queue(). The blamed patch is introduced to
receive as much packets as possible once to avoid interrupt flooding.
But it's unreasonable to clear other queues'interrupt when handling one
queue, this patch tries to fix it.

Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet)
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: altera: set a couple error code in probe()

commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream.

There are two error paths which accidentally return success instead of
a negative error code.

Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero

commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream.

Currently, due to the sequential use of min_t() and clamp_t() macros,
in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic
sets tx_max to 0.  This is then used to allocate the data area of the
SKB requested later in cdc_ncm_fill_tx_frame().

This does not cause an issue presently because when memory is
allocated during initialisation phase of SKB creation, more memory
(512b) is allocated than is required for the SKB headers alone (320b),
leaving some space (512b - 320b = 192b) for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

  skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172   \
     head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>

  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:110!
  RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
  <snip>
  Call Trace:
   <IRQ>
   skb_over_panic+0x2c/0x30 net/core/skbuff.c:115
   skb_put+0x205/0x210 net/core/skbuff.c:1877
   skb_put_zero include/linux/skbuff.h:2270 [inline]
   cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline]
   cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293
   cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514

By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX
when not offered through the system provided params, we ensure enough
data space is allocated to handle the CDC data, meaning no crash will
occur.

Cc: Oliver Neukum <oliver@neukum.org>
Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools build: Remove needless libpython-version feature check that breaks test-all fast path

commit 3d1d57debee2d342a47615707588b96658fabb85 upstream.

Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:

  $ find tools/ -type f | xargs grep feature-libpython-version
  $

The only place where this was used was removed in 66dfdff03d196e51:

  -        ifneq ($(feature-libpython-version), 1)
  -          $(warning Python 3 is not yet supported; please set)
  -          $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
  -          $(warning If you also have Python 2 installed, then)
  -          $(warning try something like:)
  -          $(warning $(and ,))
  -          $(warning $(and ,)  make PYTHON=python2)
  -          $(warning $(and ,))
  -          $(warning Otherwise, disable Python support entirely:)
  -          $(warning $(and ,))
  -          $(warning $(and ,)  make NO_LIBPYTHON=1)
  -          $(warning $(and ,))
  -          $(error   $(and ,))
  -        else
  -          LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
  -          EXTLIBS += $(PYTHON_EMBED_LIBADD)
  -          LANG_BINDINGS += $(obj-perf)python/perf.so
  -          $(call detected,CONFIG_LIBPYTHON)
  -        endif

And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.

But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:

  $ rpm -qa | grep python.*devel
  python3-devel-3.9.7-1.fc34.x86_64
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
  $ make -C tools/perf O=/tmp/build/perf install-bin
  make: Entering directory '/var/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j32' parallel build
    HOSTCC  /tmp/build/perf/fixdep.o
  <SNIP>
  $ cat /tmp/build/perf/feature/test-all.make.output
  In file included from test-all.c:18:
  test-libpython-version.c:5:10: error: #error
      5 |         #error
        |          ^~~~~
  $ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
  $

As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.

With this:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
  $ make -C tools/perf O=/tmp/build/perf install-bin |& head
  make: Entering directory '/var/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j32' parallel build
    HOSTCC  /tmp/build/perf/fixdep.o
    HOSTLD  /tmp/build/perf/fixdep-in.o
    LINK    /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  $ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
  $ cat /tmp/build/perf/feature/test-all.make.output
  $

Reviewed-by: James Clark <james.clark@arm.com>
Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: net: Reintroduce PHY no lane swap binding

commit 96db48c9d777a73a33b1d516c5cfed7a417a5f40 upstream.

This binding was already documented in phy.txt, commit 252ae5330daa
("Documentation: devicetree: Add PHY no lane swap binding"), but got
accidently removed during YAML conversion in commit d8704342c109
("dt-bindings: net: Add a YAML schemas for the generic PHY options").

Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are
not identical, as the former one disable this feature, while the latter
one doesn't change anything.

Fixes: d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130082756.713919-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/locking/locktypes: Update migrate_disable() bits.

commit 6a631c0432dcccbcf45839016a07c015e335e9ae upstream.

The initial implementation of migrate_disable() for mainline was a
wrapper around preempt_disable(). RT kernels substituted this with
a real migrate disable implementation.

Later on mainline gained true migrate disable support, but the
documentation was not updated.

Update the documentation, remove the claims about migrate_disable()
mapping to preempt_disable() on non-PREEMPT_RT kernels.

Fixes: 74d862b682f51 ("sched: Make migrate_disable/enable() independent of RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211127163200.10466-2-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix SMT detection fast read path

commit 4ffbe87e2d5b53bcb0213d8650bbe70bf942de6a upstream.

sysfs__read_int() returns 0 on success, and so the fast read path was
always failing.

Fixes: bb629484d924118e ("perf tools: Simplify checking if SMT is active.")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211124001231.3277836-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix DPIA outbox timeout after S3/S4/reset

commit af6902ec415655236adea91826bd96ed0ab16f42 upstream.

[Why]
The HW interrupt gets disabled after S3/S4/reset so we don't receive
notifications for HPD or AUX from DMUB - leading to timeout and
black screen with (or without) DPIA links connected.

[How]
Re-enable the interrupt after S3/S4/reset like we do for the other
DC interrupts.

Guard both instances of the outbox interrupt enable or we'll hang
during restore on ASIC that don't support it.

Fixes: 6eff272dbee7ad ("drm/amd/display: Fix DPIA outbox timeout after GPU reset")

Reviewed-by: Jude Shih <Jude.Shih@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"

commit 39bd54d43b3f8b3c7b3a75f5d868d8bb858860e7 upstream.

This reverts commit 239edf686c14a9ff926dec2f350289ed7adfefe2.

239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated
bridge") added support for the Type 1 Expansion ROM BAR at config offset
0x38, based on the register being listed in the Marvell Armada A3720 spec.
But the spec doesn't document it at all for RC mode, and there is no ROM in
the SOC, so remove this emulation for now.

The PCI bridge which represents aardvark's PCIe Root Port has an Expansion
ROM Base Address register at offset 0x30, but its meaning is different than
PCI's Expansion ROM BAR register, although the layout is the same.  (This
is why we thought it does the same thing.)

First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for
PCIe Root Port (or controller in RC mode) containing executable code that
would initialize the Root Port, suitable for execution in bootloader (this
is how Expansion ROM BAR is used on x86).

Second: in A3720 spec the register (address 0xD0070030) is not documented
at all for Root Complex mode, but similar to other BAR registers, it has an
"entangled partner" in register 0xD0075920, which does address translation
for the BAR in 0xD0070030:

  - the BAR register sets the address from the view of PCIe bus

  - the translation register sets the address from the view of the CPU

The other BAR registers also have this entangled partner, and they can be
used to:

  - in RC mode: address-checking on the receive side of the RC (they can
    define address ranges for memory accesses from remote Endpoints to the
    RC)

  - in Endpoint mode: allow the remote CPU to access memory on A3720

The Expansion ROM BAR has only the Endpoint part documented, but from the
similarities we think that it can also be used in RC mode in that way.

So either Expansion ROM BAR has different meaning (if the hypothesis above
is true), or we don't know it's meaning (since it is not documented for RC
mode).

Remove the register from the emulated bridge accessing functions.

[bhelgaas: summarize reason for removal (first paragraph)]
Fixes: 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")
Link: https://lore.kernel.org/r/20211125160148.26029-3-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc

commit 23ec111bf3549aae37140330c31a16abfc172421 upstream.

When trying to dump VFs VSI RX/TX descriptors
using debugfs there was a crash
due to NULL pointer dereference in i40e_dbg_dump_desc.
Added a check to i40e_dbg_dump_desc that checks if
VSI type is correct for dumping RX/TX descriptors.

Fixes: 02e9c290814c ("i40e: debugfs interface")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap

commit c0d95d3380ee099d735e08618c0d599e72f6c8b0 upstream.

When a sock is added to a sock map we evaluate what proto op hooks need to
be used. However, when the program is removed from the sock map we have not
been evaluating if that changes the required program layout.

Before the patch listed in the 'fixes' tag this was not causing failures
because the base program set handles all cases. Specifically, the case with
a stream parser and the case with out a stream parser are both handled. With
the fix below we identified a race when running with a proto op that attempts
to read skbs off both the stream parser and the skb->receive_queue. Namely,
that a race existed where when the stream parser is empty checking the
skb->receive_queue from recvmsg at the precies moment when the parser is
paused and the receive_queue is not empty could result in skipping the stream
parser. This may break a RX policy depending on the parser to run.

The fix tag then loads a specific proto ops that resolved this race. But, we
missed removing that proto ops recv hook when the sock is removed from the
sockmap. The result is the stream parser is stopped so no more skbs will be
aggregated there, but the hook and BPF program continues to be attached on
the psock. User space will then get an EBUSY when trying to read the socket
because the recvmsg() handler is now waiting on a stopped stream parser.

To fix we rerun the proto ops init() function which will look at the new set
of progs attached to the psock and rest the proto ops hook to the correct
handlers. And in the above case where we remove the sock from the sock map
the RX prog will no longer be listed so the proto ops is removed.

Fixes: c5d2177a72a16 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211119181418.353932-3-john.fastabend@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: fsmc: Fix timing computation

commit 9472335eaa1452b51dc8e8edaa1a342997cb80c7 upstream.

Under certain circumstances, the timing settings calculated by
the FSMC NAND controller driver were inaccurate.
These settings led to incorrect data reads or fallback to
timing mode 0 depending on the NAND chip used.

The timing computation did not take into account the following
constraint given in SPEAr3xx reference manual:
  twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL

Enhance the timings calculation by taking into account this
additional constraint.

This change has no impact on slow timing modes such as mode 0.
Indeed, on mode 0, computed values are the same with and
without the patch.

NANDs which previously stayed in mode 0 because of fallback to
mode 0 can now work at higher speeds and NANDs which were not
working at all because of the corrupted data work at high
speeds without troubles.

Overall improvement on a Micron/MT29F1G08 (flash_speed tool):
                        mode0       mode3
eraseblock write speed  3220 KiB/s  4511 KiB/s
eraseblock read speed   4491 KiB/s  7529 KiB/s

Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: fsmc: Take instruction delay into account

commit a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 upstream.

The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.

Add this waiting delay in the FSMC NAND controller driver.

Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix pre-set max number of queues for VF

commit 8aa55ab422d9d0d825ebfb877702ed661e96e682 upstream.

After setting pre-set combined to 16 queues and reserving 16 queues by
tc qdisc, pre-set maximum combined queues returned to default value
after VF reset being 4 and this generated errors during removing tc.
Fixed by removing clear num_req_queues before reset VF.

Fixes: e284fc280473 (i40e: Add and delete cloud filter)
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Bindushree P <Bindushree.p@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix failed opcode appearing if handling messages from VF

commit 61125b8be85dfbc7e9c7fe1cc6c6d631ab603516 upstream.

Fix failed operation code appearing if handling messages from VF.
Implemented by waiting for VF appropriate state if request starts
handle while VF reset.
Without this patch the message handling request while VF is in
a reset state ends with error -5 (I40E_ERR_PARAM).

Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: clk-alpha-pll: Don't reconfigure running Trion

commit a1f0019c342bd83240b05be68c9888549dde7935 upstream.

In the event that the bootloader has configured the Trion PLL as source
for the display clocks, e.g. for the continuous splashscreen, then there
will also be RCGs that are clocked by this instance.

Reconfiguring, and in particular disabling the output of, the PLL will
cause issues for these downstream RCGs and has been shown to prevent
them from being re-parented.

Follow downstream and skip configuration if it's determined that the PLL
is already running.

Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211123162508.153711-1-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: use module_platform_driver

commit eee377b8f44e7ac4f76bbf2440e5cbbc1d25c25f upstream.

Replace builtin_platform_driver_probe with module_platform_driver_probe
because CONFIG_CLK_IMX8QXP can be set to =m (kernel module).

Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module")
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210904235418.2442-1-miles.chen@mediatek.com
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Fix warning on /proc/i8k creation error

commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream.

The removal function is called regardless of whether
/proc/i8k was created successfully or not, the later
causing a WARN() on module removal.
Fix that by only registering the removal function
if /proc/i8k was created successfully.

Tested on a Inspiron 3505.

Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hns: Do not destroy QP resources in the hw resetting phase

commit b0969f83890bf8b47f5c8bd42539599b2b52fdeb upstream.

When hns_roce_v2_destroy_qp() is called, the brief calling process of the
driver is as follows:

......
hns_roce_v2_destroy_qp
hns_roce_v2_qp_modify
hns_roce_cmd_mbox
hns_roce_qp_destroy

If hns_roce_cmd_mbox() detects that the hardware is being reset during the
execution of the hns_roce_cmd_mbox(), the driver will not be able to get
the return value from the hardware (the firmware cannot respond to the
driver's mailbox during the hardware reset phase).

The driver needs to wait for the hardware reset to complete before
continuing to execute hns_roce_qp_destroy(), otherwise it may happen that
the driver releases the resources but the hardware is still accessing. In
order to fix this problem, HNS RoCE needs to add a piece of code to wait
for the hardware reset to complete.

The original interface get_hw_reset_stat() is the instantaneous state of
the hardware reset, which cannot accurately reflect whether the hardware
reset is completed, so it needs to be replaced with the ae_dev_reset_cnt
interface.

The sign that the hardware reset is complete is that the return value of
the ae_dev_reset_cnt interface is greater than the original value
reset_cnt recorded by the driver.

Fixes: 6a04aed6afae ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Link: https://lore.kernel.org/r/20211123142402.26936-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hns: Do not halt commands during reset until later

commit 52414e27d6b568120b087d1fbafbb4482b0ccaab upstream.

is_reset is used to indicate whether the hardware starts to reset. When
hns_roce_hw_v2_reset_notify_down() is called, the hardware has not yet
started to reset. If is_reset is set at this time, all mailbox operations
of resource destroy actions will be intercepted by driver. When the driver
cleans up resources, but the hardware is still accessed, the following
errors will appear:

  arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000003f
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0800
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
  arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043e
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0800
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
  arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000020880000436
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0880
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
  arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043a
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0840
  hns3 0000:35:00.0: INT status: CMDQ(0x0) HW errors(0x0) other(0x0)
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
  hns3 0000:35:00.0: received unknown or unhandled event of vector0
  arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
  {34}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7

is_reset will be set correctly in check_aedev_reset_status(), so the
setting in hns_roce_hw_v2_reset_notify_down() should be deleted.

Fixes: 726be12f5ca0 ("RDMA/hns: Set reset flag when hw resetting")
Link: https://lore.kernel.org/r/20211123084809.37318-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd934x: return correct value from mixer put

commit d9be0ff4796d1b6f5ee391c1b7e3653a43cedfab upstream.

wcd934x_compander_set() currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.

Fixes: 1cde8b822332 ("ASoC: wcd934x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd934x: handle channel mappping list correctly

commit 23ba28616d3063bd4c4953598ed5e439ca891101 upstream.

Currently each channel is added as list to dai channel list, however
there is danger of adding same channel to multiple dai channel list
which endups corrupting the other list where its already added.

This patch ensures that the channel is actually free before adding to
the dai channel list and also ensures that the channel is on the list
before deleting it.

This check was missing previously, and we did not hit this issue as
we were testing very simple usecases with sequence of amixer commands.

Fixes: a70d9245759a ("ASoC: wcd934x: add capture dapm widgets")
Fixes: dd9eb19b5673 ("ASoC: wcd934x: add playback dapm widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wsa881x: fix return values from kcontrol put

commit 3fc27e9a1f619b50700f020e6cd270c1b74755f0 upstream.

wsa881x_set_port() and wsa881x_put_pa_gain() currently returns zero eventhough
it changes the value. Fix this, so that change notifications are sent
correctly.

Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixer

commit 4739d88ad8e1900f809f8a5c98f3c1b65bf76220 upstream.

msm_routing_put_audio_mixer() can return incorrect value in various scenarios.

scenario 1:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0

return value is 0 instead of 1 eventhough value was changed

scenario 2:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1

return value is 1 instead of 0 eventhough the value was not changed

scenario 3:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 1 instead of 0 eventhough the value was not changed

Fix this by adding checks, so that change notifications are sent correctly.

Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5682: Fix crash due to out of scope stack vars

commit 4999d703c0e66f9f196b6edc0b8fdeca8846b8b6 upstream.

Move the declaration of temporary arrays to somewhere that won't go out
of scope before the devm_clk_hw_register() call, lest we be at the whim
of the compiler for whether those stack variables get overwritten.

Fixes a crash seen with gcc version 11.2.1 20210728 (Red Hat 11.2.1-1)

Fixes: edbd24ea1e5c ("ASoC: rt5682: Drop usage of __clk_get_name()")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211118010453.843286-1-robdclark@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: runtime: Fix pm_runtime_active() kerneldoc comment

commit 444dd878e85fb33fcfb2682cfdab4c236f33ea3e upstream.

The kerneldoc comment of pm_runtime_active() does not reflect the
behavior of the function, so update it accordingly.

Fixes: 403d2d116ec0 ("PM: runtime: Add kerneldoc comments to multiple helpers")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: validate non LSO skb length

commit 8e227b198a55859bf790dc7f4b1e30c0859c6756 upstream.

Although it is unlikely that stack could transmit a non LSO
skb with length > MTU, however in some cases or environment such
occurrences actually resulted into firmware asserts due to packet
length being greater than the max supported by the device (~9700B).

This patch adds the safeguard for such odd cases to avoid firmware
asserts.

v2: Added "Fixes" tag with one of the initial driver commit
    which enabled the TX traffic actually (as this was probably
    day1 issue which was discovered recently by some customer
    environment)

Fixes: a2ec6172d29c ("qede: Add support for link")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Reorder snd_djm_devices[] entries

commit fb1af5bea4670c835e42fc0c14c49d3499468774 upstream.

Olivia Mackintosh has posted to alsa-devel reporting that
there's a potential bug that could break mixer quirks for Pioneer
devices introduced by 6d27788160362a7ee6c0d317636fe4b1ddbe59a7
"ALSA: usb-audio: Add support for the Pioneer DJM 750MK2
Mixer/Soundcard".

This happened because the DJM 750 MK2 was added last to the Pioneer DJM
device table index and defined as 0x4 but was added to snd_djm_devices[]
just after the DJM 750 (MK1) entry instead of last, after the DJM 900
NXS2. This escaped review.

To prevent that from ever happening again, Takashi Iwai suggested to use
C99 array designators in snd_djm_devices[] instead of simply reordering
the entries.

Fixes: 6d2778816036 ("ALSA: usb-audio: Add support for the Pioneer DJM 750MK2")
Reported-by: Olivia Mackintosh <livvy@base.nu>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/Yau46FDzoql0SNnW@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_debug: Fix buffer size of REPORT ZONES command

commit 7db0e0c8190a086ef92ce5bb960836cde49540aa upstream.

According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.

Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()

commit 653926205741add87a6cf452e21950eebc6ac10b upstream.

Calling scsi_remove_host() before scsi_add_host() results in a crash:

BUG: kernel NULL pointer dereference, address: 0000000000000108
RIP: 0010:device_del+0x63/0x440
Call Trace:
  device_unregister+0x17/0x60
  scsi_remove_host+0xee/0x2a0
  pm8001_pci_probe+0x6ef/0x1b90 [pm80xx]
  local_pci_probe+0x3f/0x90

We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host()
has not been called yet at that point in time.

Function call tree:

  pm8001_pci_probe()
  |
  `- pm8001_pci_alloc()
  |  |
  |  `- pm8001_alloc()
  |     |
  |     `- scsi_remove_host()
  |
  `- scsi_add_host()

Link: https://lore.kernel.org/r/20211201041627.1592487-1-ipylypiv@google.com
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)

commit e6a59aac8a8713f335a37d762db0dbe80e7f6d38 upstream.

do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent
change_pid(PIDTYPE_PGID) that can move the task from one hlist
to another while iterating. Serialize ioprio_get to take
the tasklist_lock in this case, just like it's set counterpart.

Fixes: d69b78ba1de (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}())
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mpc: Use atomic read and fix break condition

commit a74c313aca266fab0d1d1a72becbb8b7b5286b6e upstream.

Maxime points out that the polling code in mpc_i2c_isr should use the
_atomic API because it is called in an irq context and that the
behaviour of the MCF bit is that it is 1 when the byte transfer is
complete. All of this means the original code was effectively a
udelay(100).

Fix this by using readb_poll_timeout_atomic() and removing the negation
of the break condition.

Fixes: 4a8ac5e45cda ("i2c: mpc: Poll for MCF")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracefs: Set all files to the same group ownership as the mount option

commit 48b27b6b5191e2e1f2798cd80877b6e4ef47c351 upstream.

As people have been asking to allow non-root processes to have access to
the tracefs directory, it was considered best to only allow groups to have
access to the directory, where it is easier to just set the tracefs file
system to a specific group (as other would be too dangerous), and that way
the admins could pick which processes would have access to tracefs.

Unfortunately, this broke tooling on Android that expected the other bit
to be set. For some special cases, for non-root tools to trace the system,
tracefs would be mounted and change the permissions of the top level
directory which gave access to all running tasks permission to the
tracing directory. Even though this would be dangerous to do in a
production environment, for testing environments this can be useful.

Now with the new changes to not allow other (which is still the proper
thing to do), it breaks the testing tooling. Now more code needs to be
loaded on the system to change ownership of the tracing directory.

The real solution is to have tracefs honor the gid=xxx option when
mounting. That is,

(tracing group tracing has value 1003)

mount -t tracefs -o gid=1003 tracefs /sys/kernel/tracing

should have it that all files in the tracing directory should be of the
given group.

Copy the logic from d_walk() from dcache.c and simplify it for the mount
case of tracefs if gid is set. All the files in tracefs will be walked and
their group will be set to the value passed in.

Link: https://lkml.kernel.org/r/20211207171729.2a54e1b3@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Yabin Cui <yabinc@google.com>
Fixes: 49d67e445742 ("tracefs: Have tracefs directories not set OTH permission bits by default")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: fix use-after-free due to missing POLLFREE handling

commit 50252e4b5e989ce64555c7aef7516bdefc2fea72 upstream.

signalfd_poll() and binder_poll() are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case.  This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution.  This solution is for the queue to be cleared
before it is freed, by sending a POLLFREE notification to all waiters.

Unfortunately, only eventpoll handles POLLFREE.  A second type of
non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't
handle POLLFREE.  This allows a use-after-free to occur if a signalfd or
binder fd is polled with aio poll, and the waitqueue gets freed.

Fix this by making aio poll handle POLLFREE.

A patch by Ramji Jiyani <ramjiyani@google.com>
(https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com)
tried to do this by making aio_poll_wake() always complete the request
inline if POLLFREE is seen.  However, that solution had two bugs.
First, it introduced a deadlock, as it unconditionally locked the aio
context while holding the waitqueue lock, which inverts the normal
locking order.  Second, it didn't consider that POLLFREE notifications
are missed while the request has been temporarily de-queued.

The second problem was solved by my previous patch.  This patch then
properly fixes the use-after-free by handling POLLFREE in a
deadlock-free way.  It does this by taking advantage of the fact that
freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.

Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: keep poll requests on waitqueue until completed

commit 363bee27e25804d8981dd1c025b4ad49dc39c530 upstream.

Currently, aio_poll_wake() will always remove the poll request from the
waitqueue.  Then, if aio_poll_complete_work() sees that none of the
polled events are ready and the request isn't cancelled, it re-adds the
request to the waitqueue.  (This can easily happen when polling a file
that doesn't pass an event mask when waking up its waitqueue.)

This is fundamentally broken for two reasons:

  1. If a wakeup occurs between vfs_poll() and the request being
     re-added to the waitqueue, it will be missed because the request
     wasn't on the waitqueue at the time.  Therefore, IOCB_CMD_POLL
     might never complete even if the polled file is ready.

  2. When the request isn't on the waitqueue, there is no way to be
     notified that the waitqueue is being freed (which happens when its
     lifetime is shorter than the struct file's).  This is supposed to
     happen via the waitqueue entries being woken up with POLLFREE.

Therefore, leave the requests on the waitqueue until they are actually
completed (or cancelled).  To keep track of when aio_poll_complete_work
needs to be scheduled, use new fields in struct poll_iocb.  Remove the
'done' field which is now redundant.

Note that this is consistent with how sys_poll() and eventpoll work;
their wakeup functions do *not* remove the waitqueue entries.

Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://lore.kernel.org/r/20211209010455.42744-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signalfd: use wake_up_pollfree()

commit 9537bae0da1f8d1e2361ab6d0479e8af7824e160 upstream.

wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up
all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll
and aio poll are fortunately not affected by this, but it's very
fragile. Thus, the new function wake_up_pollfree() has been introduced.

Convert signalfd to use wake_up_pollfree().

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: d80e731ecab4 ("epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: use wake_up_pollfree()

commit a880b28a71e39013e357fd3adccd1d8a31bc69a8 upstream.

wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up
all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll
and aio poll are fortunately not affected by this, but it's very
fragile. Thus, the new function wake_up_pollfree() has been introduced.

Convert binder to use wake_up_pollfree().

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: f5cb779ba163 ("ANDROID: binder: remove waitqueue when thread exits.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wait: add wake_up_pollfree()

commit 42288cb44c4b5fff7653bc392b583a2b8bd6a8c0 upstream.

Several ->poll() implementations are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case.  This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution.  This solution is for the queue to be cleared
before it is freed, using 'wake_up_poll(wq, EPOLLHUP | POLLFREE);'.

However, that has a bug: wake_up_poll() calls __wake_up() with
nr_exclusive=1.  Therefore, if there are multiple "exclusive" waiters,
and the wakeup function for the first one returns a positive value, only
that one will be called.  That's *not* what's needed for POLLFREE;
POLLFREE is special in that it really needs to wake up everyone.

Considering the three non-blocking poll systems:

- io_uring poll doesn't handle POLLFREE at all, so it is broken anyway.

- aio poll is unaffected, since it doesn't support exclusive waits.
  However, that's fragile, as someone could add this feature later.

- epoll doesn't appear to be broken by this, since its wakeup function
  returns 0 when it sees POLLFREE.  But this is fragile.

Although there is a workaround (see epoll), it's better to define a
function which always sends POLLFREE to all waiters.  Add such a
function.  Also make it verify that the queue really becomes empty after
all waiters have been woken up.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: ensure task_work gets run as part of cancelations

commit 78a780602075d8b00c98070fa26e389b3b3efa72 upstream.

If we successfully cancel a work item but that work item needs to be
processed through task_work, then we can be sleeping uninterruptibly
in io_uring_cancel_generic() and never process it. Hence we don't
make forward progress and we end up with an uninterruptible sleep
warning.

While in there, correct a comment that should be IFF, not IIF.

Reported-and-tested-by: syzbot+21e6887c0be14181206d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add horkage for ASMedia 1092

commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream.

The ASMedia 1092 has a configuration mode which will present a
dummy device; sadly the implementation falsely claims to provide
a device with 100M which doesn't actually exist.
So disable this device to avoid errors during boot.

Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.

commit b19926d4f3a660a8b76e5d989ffd1168e619a5c4 upstream.

dma_fence_chain_find_seqno only ever returns the top fence in the
chain or an unsignalled fence. Hence if we request a seqno that
is already signalled it returns a NULL fence. Some callers are
not prepared to handle this, like the syncobj transfer functions
for example.

This behavior is "new" with timeline syncobj and it looks like
not all callers were updated. To fix this behavior make sure
that a successful drm_sync_find_fence always returns a non-NULL
fence.

v2: Move the fix to drm_syncobj_find_fence from the transfer
functions.

Fixes: ea569910cbab ("drm/syncobj: add transition iotcls between binary and timeline v2")
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208023935.17018-1-bas@basnieuwenhuizen.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: int340x: Fix VCoRefLow MMIO bit offset for TGL

commit f872f73601b92c86f3da8bdf3e19abd0f1780eb9 upstream.

The VCoRefLow CPU FIVR register definition for Tiger Lake is incorrect.

Current implementation reads it from MMIO offset 0x5A18 and bit
offset [12:14], but the actual correct register definition is from
bit offset [11:13].

Update to fix the bit offset.

Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
[ rjw: New subject, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: regmap-mux: fix parent clock lookup

commit 9a61f813fcc8d56d85fcf9ca6119cf2b5ac91dd5 upstream.

The function mux_get_parent() uses qcom_find_src_index() to find the
parent clock index, which is incorrect: qcom_find_src_index() uses src
enum for the lookup, while mux_get_parent() should use cfg field (which
corresponds to the register value). Add qcom_find_cfg_index() function
doing this kind of lookup and use it for mux parent lookup.

Fixes: df964016490b ("clk: qcom: add parent map for regmap mux")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi: initialize variable properly when tuning

commit 7dba402807a85fa3723f4a27504813caf81cc9d7 upstream.

'cmd_error' is not necessarily initialized on some error paths in
mmc_send_tuning(). Initialize it.

Fixes: 2c9017d0b5d3 ("mmc: renesas_sdhi: abort tuning when timeout detected")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211130132309.18246-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pwm-fan) Ensure the fan going on in .probe()

commit a2ca752055edd39be38b887e264d3de7ca2bc1bb upstream.

Before commit 86585c61972f ("hwmon: (pwm-fan) stop using legacy
PWM functions and some cleanups") pwm_apply_state() was called
unconditionally in pwm_fan_probe(). In this commit this direct
call was replaced by a call to __set_pwm(ct, MAX_PWM) which
however is a noop if ctx->pwm_value already matches the value to
set.
After probe the fan is supposed to run at full speed, and the
internal driver state suggests it does, but this isn't asserted
and depending on bootloader and pwm low-level driver, the fan
might just be off.
So drop setting pwm_value to MAX_PWM to ensure the check in
__set_pwm doesn't make it exit early and the fan goes on as
intended.

Cc: stable@vger.kernel.org
Fixes: 86585c61972f ("hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211130092212.17783-1-billy_tsai@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: KVM: avoid failures due to reserved HyperTransport region

commit c8cc43c1eae2910ac96daa4216e0fb3391ad0504 upstream.

AMD proceessors define an address range that is reserved by HyperTransport
and causes a failure if used for guest physical addresses. Avoid
selftests failures by reserving those guest physical addresses; the
rules are:

- On parts with <40 bits, its fully hidden from software.

- Before Fam17h, it was always 12G just below 1T, even if there was more
RAM above this location. In this case we just not use any RAM above 1T.

- On Fam17h and later, it is variable based on SME, and is either just
below 2^48 (no encryption) or 2^43 (encryption).

Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210805105423.412878-1-pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracefs: Have new files inherit the ownership of their parent

commit ee7f3666995d8537dec17b1d35425f28877671a9 upstream.

If directories in tracefs have their ownership changed, then any new files
and directories that are created under those directories should inherit
the ownership of the director they are created in.

Link: https://lkml.kernel.org/r/20211208075720.4855d180@gandalf.local.home
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yabin Cui <yabinc@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: stable@vger.kernel.org
Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system")
Reported-by: Kalesh Singh <kaleshsingh@google.com>
Reported: https://lore.kernel.org/all/CAC_TJve8MMAv+H_NdLSJXZUSoxOEq2zB_pVaJ9p=7H6Bu3X76g@mail.gmail.com/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Fix nsfd startup race (again)

commit b10252c7ae9c9d7c90552f88b544a44ee773af64 upstream.

Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
has re-opened rpc_pipefs_event() race against nfsd_net_id registration
(register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76
("nfsd: fix nsfd startup race triggering BUG_ON").

Restore the order of register_pernet_subsys() vs register_cld_notifier().
Add WARN_ON() to prevent a future regression.

Crash info:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012
CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1
pc : rpc_pipefs_event+0x54/0x120 [nfsd]
lr : rpc_pipefs_event+0x48/0x120 [nfsd]
Call trace:
rpc_pipefs_event+0x54/0x120 [nfsd]
blocking_notifier_call_chain
rpc_fill_super
get_tree_keyed
rpc_fs_get_tree
vfs_get_tree
do_mount
ksys_mount
__arm64_sys_mount
el0_svc_handler
el0_svc

Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix use-after-free due to delegation race

commit 548ec0805c399c65ed66c6641be467f717833ab5 upstream.

A delegation break could arrive as soon as we've called vfs_setlease.  A
delegation break runs a callback which immediately (in
nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru.  If we
then exit nfs4_set_delegation without hashing the delegation, it will be
freed as soon as the callback is done with it, without ever being
removed from del_recall_lru.

Symptoms show up later as use-after-free or list corruption warnings,
usually in the laundromat thread.

I suspect aba2072f4523 "nfsd: grant read delegations to clients holding
writes" made this bug easier to hit, but I looked as far back as v3.0
and it looks to me it already had the same problem.  So I'm not sure
where the bug was introduced; it may have been there from the beginning.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix update super 1.0 on rdev size change

commit 55df1ce0d4e086e05a8ab20619c73c729350f965 upstream.

The superblock of version 1.0 doesn't get moved to the new position on a
device size change. This leads to a rdev without a superblock on a known
position, the raid can't be re-assembled.

The line was removed by mistake and is re-added by this patch.

Fixes: d9c0fa509eaf ("md: fix max sectors calculation for super 1.0")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Hochholdinger <markus@hochholdinger.net>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix error timestamp setting on the decoder error path

commit 6665b8e4836caa8023cbc7e53733acd234969c8c upstream.

An error timestamp shows the last known timestamp for the queue, but this
is not updated on the error path. Fix by setting it.

Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix missing 'instruction' events with 'q' option

commit a882cc94971093e146ffa1163b140ad956236754 upstream.

FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.

Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix next 'err' value, walking trace

commit a32e6c5da599dbf49e60622a4dfb5b9b40ece029 upstream.

Code after label 'next:' in intel_pt_walk_trace() assumes 'err' is zero,
but it may not be, if arrived at via a 'goto'. Ensure it is zero.

Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix state setting when receiving overflow (OVF) packet

commit c79ee2b2160909889df67c8801352d3e69d43a1a upstream.

An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.

To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.

Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type

commit 4c761d805bb2d2ead1b9baaba75496152b394c80 upstream.

intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.

Fix by touching only the state type flags that are affected by an FUP
event.

Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix sync state when a PSB (synchronization) packet is found

commit ad106a26aef3a95ac7ca88d033b431661ba346ce upstream.

When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.

Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage

commit 057ae59f5a1d924511beb1b09f395bdb316cfd03 upstream.

Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.

PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.

Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b0554 ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: free exchange changeset on failures

commit da5e817d9d75422eaaa05490d0b9a5e328fc1a51 upstream.

Fstests runs on my VMs have show several kmemleak reports like the following.

  unreferenced object 0xffff88811ae59080 (size 64):
    comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s)
    hex dump (first 32 bytes):
      00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00  ................
      90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff  ................
    backtrace:
      [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs]
      [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs]
      [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs]
      [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs]
      [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs]
      [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs]
      [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs]
      [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs]
      [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0
      [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700
      [<000000002567ba53>] iomap_dio_rw+0x5/0x20
      [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs]
      [<000000005eb3d845>] new_sync_write+0x106/0x180
      [<000000003fb505bf>] vfs_write+0x24d/0x2f0
      [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0
      [<000000003eba3fdf>] do_syscall_64+0x43/0x90

In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata()
fail the allocated extent_changeset will not be freed.

So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space()
free the allocated extent_changeset to get rid of the allocated memory.

The issue currently only happens in the direct IO write path, but only
after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO
write into NOCOW range"), and also at defrag_one_locked_target(). Every
other place is always calling extent_changeset_free() even if its call
to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has
failed.

CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling

commit 8289ed9f93bef2762f9184e136d994734b16d997 upstream.

I hit the BUG_ON() with generic/475 test case, and to my surprise, all
callers of btrfs_del_root_ref() are already aborting transaction, thus
there is not need for such BUG_ON(), just go to @out label and caller
will properly handle the error.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix re-dirty process of tree-log nodes

commit 84c25448929942edacba905cecc0474e91114e7a upstream.

There is a report of a transaction abort of -EAGAIN with the following
script.

  #!/bin/sh

  for d in sda sdb; do
          mkfs.btrfs -d single -m single -f /dev/\${d}
  done

  mount /dev/sda /mnt/test
  mount /dev/sdb /mnt/scratch

  for dir in test scratch; do
          echo 3 >/proc/sys/vm/drop_caches
          fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \
                  --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \
                  --group_reporting |& tee /dev/shm/fio.\${dir}
          echo 3 >/proc/sys/vm/drop_caches
  done

  for d in sda sdb; do
          umount /dev/\${d}
  done

The stack trace is shown in below.

  [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction)
  [3310.968060] BTRFS info (device sda): forced readonly
  [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction.
  [3310.968065] ------------[ cut here ]------------
  [3310.968066] BTRFS: Transaction aborted (error -11)
  [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8
  [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1
  [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021
  [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8
  [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282
  [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027
  [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00
  [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48
  [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00
  [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58
  [3310.968154] FS:  00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000
  [3310.968157] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0
  [3310.968160] PKRU: 55555554
  [3310.968161] Call Trace:
  [3310.968167]  ? dput+0xd4/0x300
  [3310.968174]  btrfs_sync_file+0x3f1/0x490
  [3310.968180]  __x64_sys_fsync+0x33/0x60
  [3310.968185]  do_syscall_64+0x3b/0x90
  [3310.968190]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [3310.968194] RIP: 0033:0x7efe6557329b
  [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
  [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b
  [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006
  [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010
  [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980
  [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000
  [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]---
  [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown

The abort occurs because of a write hole while writing out freeing tree
nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree
node to ensure btrfs can write the region and does not leave a hole on
write on a zoned device. The current code fails to re-dirty a node
when the tree-log tree's depth is greater or equal to 2. That leads to
a transaction abort with -EAGAIN.

Fix the issue by properly re-dirtying a node on walking up the tree.

Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.12+
Link: https://github.com/kdave/btrfs-progs/issues/415
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: clear extent buffer uptodate when we fail to write it

commit c2e39305299f0118298c2201f6d6cc7d3485f29e upstream.

I got dmesg errors on generic/281 on our overnight fstests.  Looking at
the history this happens occasionally, with errors like this

  WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
  CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G        W         5.16.0-rc2+ #469
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: btrfs-cache btrfs_work_helper
  RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
  RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
  RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
  RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
  RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
  R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
  R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
  FS:  0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
  Call Trace:

   extent_buffer_test_bit+0x3f/0x70
   free_space_test_bit+0xa6/0xc0
   load_free_space_tree+0x1d6/0x430
   caching_thread+0x454/0x630
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? lock_release+0x1f0/0x2d0
   btrfs_work_helper+0xf2/0x3e0
   ? lock_release+0x1f0/0x2d0
   ? finish_task_switch.isra.0+0xf9/0x3a0
   process_one_work+0x270/0x5a0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5a0/0x5a0
   kthread+0x174/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we're trying to read from a extent buffer page that
is !PageUptodate.  This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.

Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.

CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Format log strings only if needed

commit 69002c8ce914ef0ae22a6ea14b43bb30b9a9a6a8 upstream.

Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.

Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com
Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix crash on unload of cifs_arc4.ko

commit 51a08bdeca27988a17c87b87d8e64ffecbd2a172 upstream.

The exit function is wrongly placed in the __init section and this leads
to a crash when the module is unloaded. Just remove both the init and
exit functions since this module does not need them.

Fixes: 71c02863246167b3d ("cifs: fork arc4 and create a separate module...")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*()

commit 6665bb30a6b1a4a853d52557c05482ee50e71391 upstream.

A couple of calls in snd_pcm_oss_change_params_locked() ignore the
possible errors. Catch those errors and abort the operation for
avoiding further problems.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Limit the period size to 16MB

commit 8839c8c0f77ab8fc0463f4ab8b37fca3f70677c2 upstream.

Set the practical limit to the period size (the fragment shift in OSS)
instead of a full 31bit; a too large value could lead to the exhaust
of memory as we allocate temporary buffers of the period size, too.

As of this patch, we set to 16MB limit, which should cover all use
cases.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Fix negative period/buffer sizes

commit 9d2479c960875ca1239bcb899f386970c13d9cfe upstream.

The period size calculation in OSS layer may receive a negative value
as an error, but the code there assumes only the positive values and
handle them with size_t. Due to that, a too big value may be passed
to the lower layers.

This patch changes the code to handle with ssize_t and adds the proper
error checks appropriately.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix quirk for TongFang PHxTxX1

commit 619764cc2ec9ce1283a8bbcd89a1376a7c68293b upstream.

This fixes the SND_PCI_QUIRK(...) of the TongFang PHxTxX1 barebone. This
fixes the issue of sound not working after s3 suspend.

When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020. Setting the value manually makes the sound work again. This patch
does this automatically.

While being on it, I also fixed the comment formatting of the quirk and
shortened variable and function names.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: dd6dd6e3c791 ("ALSA: hda/realtek: Add quirk for TongFang PHxTxX1")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202165010.876431-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform

commit d7f32791a9fcf0dae8b073cdea9b79e29098c5f4 upstream.

Lenovo ALC897 platform had headset Mic.
This patch enable supported headset Mic.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/baab2c2536cb4cc18677a862c6f6d840@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ctl: Fix copy of updated id with element read/write

commit b6409dd6bdc03aa178bbff0d80db2a30d29b63ac upstream.

When control_compat.c:copy_ctl_value_to_user() is used, by
ctl_elem_read_user() & ctl_elem_write_user(), it must also copy back the
snd_ctl_elem_id value that may have been updated (filled in) by the call
to snd_ctl_elem_read/snd_ctl_elem_write().

This matches the functionality provided by snd_ctl_elem_read_user() and
snd_ctl_elem_write_user(), via snd_ctl_build_ioff().

Without this, and without making additional calls to snd_ctl_info()
which are unnecessary when using the non-compat calls, a userspace
application will not know the numid value for the element and
consequently will not be able to use the poll/read interface on the
control file to determine which elements have updates.

Signed-off-by: Alan Young <consult.awy@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202150607.543389-1-consult.awy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: bdi: initialize bdi_min_ratio when bdi is unregistered

commit 3c376dfafbf7a8ea0dea212d095ddd83e93280bb upstream.

Initialize min_ratio if it is set during bdi unregistration. This can
prevent problems that may occur a when bdi is removed without resetting
min_ratio.

For example.
1) insert external sdcard
2) set external sdcard's min_ratio 70
3) remove external sdcard without setting min_ratio 0
4) insert external sdcard
5) set external sdcard's min_ratio 70 << error occur(can't set)

Because when an sdcard is removed, the present bdi_min_ratio value will
remain. Currently, the only way to reset bdi_min_ratio is to reboot.

[akpm@linux-foundation.org: tweak comment and coding style]

Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com
Signed-off-by: Manjong Lee <mj0123.lee@samsung.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Changheun Lee <nanich.lee@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <seunghwan.hyun@samsung.com>
Cc: <sookwan7.kim@samsung.com>
Cc: <yt0928.kim@samsung.com>
Cc: <junho89.kim@samsung.com>
Cc: <jisoo2146.oh@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/slub: fix endianness bug for alloc/free_traces attributes

commit 005a79e5c254c3f60ec269a459cc41b55028c798 upstream.

On big-endian s390, the alloc/free_traces attributes produce endless
output, because of always 0 idx in slab_debugfs_show().

idx is de-referenced from *v, which points to a loff_t value, with

unsigned int idx = *(unsigned int *)v;

This will only give the upper 32 bits on big-endian, which remain 0.

Instead of only fixing this de-reference, during discussion it seemed
more appropriate to change the seq_ops so that they use an explicit
iterator in private loc_track struct.

This patch adds idx to loc_track, which will also fix the endianness
bug.

Link: https://lore.kernel.org/r/20211117193932.4049412-1-gerald.schaefer@linux.ibm.com
Link: https://lkml.kernel.org/r/20211126171848.17534-1-gerald.schaefer@linux.ibm.com
Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/core: fix fake load reports due to uninterruptible sleeps

commit 70e9274805fccfd175d0431a947bfd11ee7df40e upstream.

Because DAMON sleeps in uninterruptible mode, /proc/loadavg reports fake
load while DAMON is turned on, though it is doing nothing. This can
confuse users[1]. To avoid the case, this commit makes DAMON sleeps in
idle mode.

[1] https://lore.kernel.org/all/11868371.O9o76ZdvQC@natalenko.name/

Link: https://lkml.kernel.org/r/20211126145015.15862-3-sj@kernel.org
Fixes: 2224d8485492 ("mm: introduce Data Access MONitor (DAMON)")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: implement usleep_idle_range()

commit e4779015fd5d2fb8390c258268addff24d6077c7 upstream.

Patch series "mm/damon: Fix fake /proc/loadavg reports", v3.

This patchset fixes DAMON's fake load report issue.  The first patch
makes yet another variant of usleep_range() for this fix, and the second
patch fixes the issue of DAMON by making it using the newly introduced
function.

This patch (of 2):

Some kernel threads such as DAMON could need to repeatedly sleep in
micro seconds level.  Because usleep_range() sleeps in uninterruptible
state, however, such threads would make /proc/loadavg reports fake load.

To help such cases, this commit implements a variant of usleep_range()
called usleep_idle_range().  It is same to usleep_range() but sets the
state of the current task as TASK_IDLE while sleeping.

Link: https://lkml.kernel.org/r/20211126145015.15862-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211126145015.15862-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Wait for IPIs to be delivered when handling Hyper-V TLB flush hypercall

commit 1ebfaa11ebb5b603a3c3f54b2e84fcf1030f5a14 upstream.

Prior to commit 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use
tlb_flush_guest()"), kvm_hv_flush_tlb() was using 'KVM_REQ_TLB_FLUSH |
KVM_REQUEST_NO_WAKEUP' when making a request to flush TLBs on other vCPUs
and KVM_REQ_TLB_FLUSH is/was defined as:

(0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)

so KVM_REQUEST_WAIT was lost. Hyper-V TLFS, however, requires that
"This call guarantees that by the time control returns back to the
caller, the observable effects of all flushes on the specified virtual
processors have occurred." and without KVM_REQUEST_WAIT there's a small
chance that the vCPU making the TLB flush will resume running before
all IPIs get delivered to other vCPUs and a stale mapping can get read
there.

Fix the issue by adding KVM_REQUEST_WAIT flag to KVM_REQ_TLB_FLUSH_GUEST:
kvm_hv_flush_tlb() is the sole caller which uses it for
kvm_make_all_cpus_request()/kvm_make_vcpus_request_mask() where
KVM_REQUEST_WAIT makes a difference.

Cc: stable@kernel.org
Fixes: 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211209102937.584397-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req

commit 3244867af8c065e51969f1bffe732d3ebfd9a7d2 upstream.

Do not bail early if there are no bits set in the sparse banks for a
non-sparse, a.k.a. "all CPUs", IPI request.  Per the Hyper-V spec, it is
legal to have a variable length of '0', e.g. VP_SET's BankContents in
this case, if the request can be serviced without the extra info.

  It is possible that for a given invocation of a hypercall that does
  accept variable sized input headers that all the header input fits
  entirely within the fixed size header. In such cases the variable sized
  input header is zero-sized and the corresponding bits in the hypercall
  input should be set to zero.

Bailing early results in KVM failing to send IPIs to all CPUs as expected
by the guest.

Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211207220926.718794-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't WARN if userspace mucks with RCX during string I/O exit

commit d07898eaf39909806128caccb6ebd922ee3edd69 upstream.

Replace a WARN with a comment to call out that userspace can modify RCX
during an exit to userspace to handle string I/O. KVM doesn't actually
support changing the rep count during an exit, i.e. the scenario can be
ignored, but the WARN needs to go as it's trivial to trigger from
userspace.

Cc: stable@vger.kernel.org
Fixes: 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211025201311.1881846-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: fix XDP rx queues registering

commit a50e659b2a1be14784e80f8492aab177e67c53a2 upstream.

The registration of XDP queue information is incorrect because the
RX queue id we use is invalid. When port->id == 0 it appears to works
as expected yet it's no longer the case when port->id != 0.

The problem arised while using a recent kernel version on the
MACCHIATOBin. This board has several ports:
* eth0 and eth1 are 10Gbps interfaces ; both ports has port->id == 0;
* eth2 is a 1Gbps interface with port->id != 0.

Code from xdp-tutorial (more specifically advanced03-AF_XDP) was used
to test packet capture and injection on all these interfaces. The XDP
kernel was simplified to:

SEC("xdp_sock")
int xdp_sock_prog(struct xdp_md *ctx)
{
int index = ctx->rx_queue_index;

/* A set entry here means that the correspnding queue_id
* has an active AF_XDP socket bound to it. */
if (bpf_map_lookup_elem(&xsks_map, &index))
return bpf_redirect_map(&xsks_map, index, 0);

return XDP_PASS;
}

Starting the program using:

./af_xdp_user -d DEV

Gives the following result:

* eth0 : ok
* eth1 : ok
* eth2 : no capture, no injection

Investigating the issue shows that XDP rx queues for eth2 are wrong:
XDP expects their id to be in the range [0..3] but we found them to be
in the range [32..35].

Trying to force rx queue ids using:

./af_xdp_user -d eth2 -Q 32

fails as expected (we shall not have more than 4 queues).

When we register the XDP rx queue information (using
xdp_rxq_info_reg() in function mvpp2_rxq_init()) we tell it to use
rxq->id as the queue id. This value is computed as:

rxq->id = port->id * max_rxq_count + queue_id

where max_rxq_count depends on the device version. In the MACCHIATOBin
case, this value is 32, meaning that rx queues on eth2 are numbered
from 32 to 35 - there are four of them.

Clearly, this is not the per-port queue id that XDP is expecting:
it wants a value in the range [0..3]. It shall directly use queue_id
which is stored in rxq->logic_rxq -- so let's use that value instead.

rxq->id is left untouched ; its value is indeed valid but it should
not be used in this context.

This is consistent with the remaining part of the code in
mvpp2_rxq_init().

With this change, packet capture is working as expected on all the
MACCHIATOBin ports.

Fixes: b27db2274ba8 ("mvpp2: use page_pool allocator")
Signed-off-by: Louis Amas <louis.amas@eho.link>
Signed-off-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20211207143423.916334-1-louis.amas@eho.link
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: fq_pie: prevent dismantle issue

commit 61c2402665f1e10c5742033fce18392e369931d7 upstream.

For some reason, fq_pie_destroy() did not copy
working code from pie_destroy() and other qdiscs,
thus causing elusive bug.

Before calling del_timer_sync(&q->adapt_timer),
we need to ensure timer will not rearm itself.

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579
(t=10501 jiffies g=13085 q=3989)
NMI backtrace for cpu 0
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:627 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:711 [inline]
rcu_pending kernel/rcu/tree.c:3878 [inline]
rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:write_comp_data kernel/kcov.c:221 [inline]
RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273
Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00
RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000
RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003
RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000
pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418
fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Cc: Sachin D. Patil <sdp.sachin@gmail.com>
Cc: V. Saicharan <vsaicharan1998@gmail.com>
Cc: Mohit Bhasi <mohitbhasi1998@gmail.com>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Link: https://lore.kernel.org/r/20211209084937.3500020-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering

commit e8b1d7698038e76363859fb47ae0a262080646f5 upstream.

Avoid a memory leak if there is not a CPU port defined.

Fixes: 8d5f7954b7c8 ("net: dsa: felix: break at first CPU port during init and teardown")
Addresses-Coverity-ID: 1492897 ("Resource leak")
Addresses-Coverity-ID: 1492899 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211209110538.11585-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: error handling for serdes_power functions

commit 0416e7af2369b0d12a28dea8d30b104df9a6953d upstream.

Added default case to handle undefined cmode scenario in
mv88e6393x_serdes_power() and mv88e6393x_serdes_power() methods.

Addresses-Coverity: 1494644 ("Uninitialized scalar variable")
Fixes: 21635d9203e1c (net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X)
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211209041552.9810-1-amhamza.mgc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcm4908: Handle dma_set_coherent_mask error codes

commit 128f6ec95a282b2d8bc1041e59bf65810703fa44 upstream.

The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: fix netns refcount leak in devlink_nl_cmd_reload()

commit 4dbb0dad8e63fcd0b5a117c2861d2abe7ff5f186 upstream.

While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()

Some error paths forgot to release a refcount on a netns.

To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload().

Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command")
Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211205192822.1741045-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Correct guard on eager buffer deallocation

commit 9292f8f9a2ac42eb320bced7153aa2e63d8cc13a upstream.

The code tests the dma address which legitimately can be 0.

The code should test the kernel logical address to avoid leaking eager
buffer allocations that happen to map to a dma address of 0.

Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled")
Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: Fix reporting when setting descriptor count

commit 1a1aa356ddf3f16539f5962c01c5f702686dfc15 upstream.

iavf_set_ringparams doesn't communicate to the user that

1. The user requested descriptor count is out of range. Instead it
   just quietly sets descriptors to the "clamped" value and calls it
   done. This makes it look an invalid value was successfully set as
   the descriptor count when this isn't actually true.

2. The user provided descriptor count needs to be inflated for alignment
   reasons.

This behavior is confusing. The ice driver has already addressed this
by rejecting invalid values for descriptor count and
messaging for alignment adjustments.
Do the same thing here by adding the error and info messages.

Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: restore MSI state on reset

commit 7e4dcc13965c57869684d57a1dc6dd7be589488c upstream.

If the PF experiences an FLR, the VF's MSI and MSI-X configuration will
be conveniently and silently removed in the process. When this happens,
reset recovery will appear to complete normally but no traffic will
pass. The netdev watchdog will helpfully notify everyone of this issue.

To prevent such public embarrassment, restore MSI configuration at every
reset. For normal resets, this will do no harm, but for VF resets
resulting from a PF FLR, this will keep the VF working.

Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: annotate data-races around ct->timeout

commit 802a7dc5cf1bef06f7b290ce76d478138408d6b1 upstream.

(struct nf_conn)->timeout can be read/written locklessly,
add READ_ONCE()/WRITE_ONCE() to prevent load/store tearing.

BUG: KCSAN: data-race in __nf_conntrack_alloc / __nf_conntrack_find_get

write to 0xffff888132e78c08 of 4 bytes by task 6029 on cpu 0:
__nf_conntrack_alloc+0x158/0x280 net/netfilter/nf_conntrack_core.c:1563
init_conntrack+0x1da/0xb30 net/netfilter/nf_conntrack_core.c:1635
resolve_normal_ct+0x502/0x610 net/netfilter/nf_conntrack_core.c:1746
nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901
ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414
nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline]
nf_hook_slow+0x72/0x170 net/netfilter/core.c:619
nf_hook include/linux/netfilter.h:262 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324
inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402
tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline]
tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680
__tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864
tcp_push_pending_frames include/net/tcp.h:1897 [inline]
tcp_data_snd_check+0x62/0x2e0 net/ipv4/tcp_input.c:5452
tcp_rcv_established+0x880/0x10e0 net/ipv4/tcp_input.c:5947
tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521
sk_backlog_rcv include/net/sock.h:1030 [inline]
__release_sock+0xf2/0x270 net/core/sock.c:2768
release_sock+0x40/0x110 net/core/sock.c:3300
sk_stream_wait_memory+0x435/0x700 net/core/stream.c:145
tcp_sendmsg_locked+0xb85/0x25a0 net/ipv4/tcp.c:1402
tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1440
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:644
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
__sys_sendto+0x21e/0x2c0 net/socket.c:2036
__do_sys_sendto net/socket.c:2048 [inline]
__se_sys_sendto net/socket.c:2044 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2044
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888132e78c08 of 4 bytes by task 17446 on cpu 1:
nf_ct_is_expired include/net/netfilter/nf_conntrack.h:286 [inline]
____nf_conntrack_find net/netfilter/nf_conntrack_core.c:776 [inline]
__nf_conntrack_find_get+0x1c7/0xac0 net/netfilter/nf_conntrack_core.c:807
resolve_normal_ct+0x273/0x610 net/netfilter/nf_conntrack_core.c:1734
nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901
ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414
nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline]
nf_hook_slow+0x72/0x170 net/netfilter/core.c:619
nf_hook include/linux/netfilter.h:262 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324
inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402
__tcp_send_ack+0x1fd/0x300 net/ipv4/tcp_output.c:3956
tcp_send_ack+0x23/0x30 net/ipv4/tcp_output.c:3962
__tcp_ack_snd_check+0x2d8/0x510 net/ipv4/tcp_input.c:5478
tcp_ack_snd_check net/ipv4/tcp_input.c:5523 [inline]
tcp_rcv_established+0x8c2/0x10e0 net/ipv4/tcp_input.c:5948
tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521
sk_backlog_rcv include/net/sock.h:1030 [inline]
__release_sock+0xf2/0x270 net/core/sock.c:2768
release_sock+0x40/0x110 net/core/sock.c:3300
tcp_sendpage+0x94/0xb0 net/ipv4/tcp.c:1114
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
rds_tcp_xmit+0x376/0x5f0 net/rds/tcp_send.c:118
rds_send_xmit+0xbed/0x1500 net/rds/send.c:367
rds_send_worker+0x43/0x200 net/rds/threads.c:200
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30

value changed: 0x00027cc2 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17446 Comm: kworker/u4:5 Tainted: G W 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: krdsd rds_send_worker

Note: I chose an arbitrary commit for the Fixes: tag,
because I do not think we need to backport this fix to very old kernels.

Fixes: e37542ba111f ("netfilter: conntrack: avoid possible false sharing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_exthdr: break evaluation if setting TCP option fails

commit 962e5a40358787105f126ab1dc01604da3d169e9 upstream.

Break rule evaluation on malformed TCP options.

Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: using datalen to cap max gso segments

commit 158390e45612ef0fde160af0826f1740c36daf21 upstream.

The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS,
this is checked in udp_send_skb():

    if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
        kfree_skb(skb);
        return -EINVAL;
    }

skb->len contains network and transport header len here, we should use
only data len instead.

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seg6: fix the iif in the IPv6 socket control block

commit ae68d93354e5bf5191ee673982251864ea24dd5c upstream.

When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):

IPCB(skb)->iif = skb->skb_iif;

If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):

memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));

The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).

Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).

As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.

To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.

Fixes: ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>