Voon Weifeng [Tue, 26 Jan 2021 10:08:44 +0000 (18:08 +0800)]
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.
[ 25.535095] ------------[ cut here ]------------
[ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5
[ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.
2010231402 10/23/2020
[ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[ 25.685647] RSP: 0018:
ffffb7ca80160eb8 EFLAGS:
00010286
[ 25.691498] RAX:
0000000000000000 RBX:
0000000000000002 RCX:
0000000000000103
[ 25.699483] RDX:
0000000080000103 RSI:
00000000000000f6 RDI:
00000000ffffffff
[ 25.707465] RBP:
ffff985709ce0440 R08:
0000000000000000 R09:
c0000000ffffefff
[ 25.715455] R10:
ffffb7ca80160cf0 R11:
ffffb7ca80160ce8 R12:
ffff985709ce039c
[ 25.723438] R13:
ffff985709ce0000 R14:
0000000000000008 R15:
ffff9857068af940
[ 25.731425] FS:
0000000000000000(0000) GS:
ffff985864300000(0000) knlGS:
0000000000000000
[ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 25.746913] CR2:
00005567f8bb76b8 CR3:
00000001f8e0a000 CR4:
0000000000350ee0
[ 25.754900] Call Trace:
[ 25.757631] <IRQ>
[ 25.759891] ? qdisc_put_unlocked+0x30/0x30
[ 25.764565] ? qdisc_put_unlocked+0x30/0x30
[ 25.769245] call_timer_fn+0x2e/0x140
[ 25.773346] run_timer_softirq+0x1f3/0x430
[ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0
[ 25.783005] ? ktime_get+0x3e/0xa0
[ 25.786812] __do_softirq+0xa6/0x2ef
[ 25.790816] asm_call_irq_on_stack+0xf/0x20
[ 25.795501] </IRQ>
[ 25.797852] do_softirq_own_stack+0x5d/0x80
[ 25.802538] irq_exit_rcu+0x94/0xb0
[ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0
[ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[ 25.844140] RSP: 0018:
ffffb7ca800f7e80 EFLAGS:
00000206
[ 25.849996] RAX:
ffff985864300000 RBX:
0000000000000003 RCX:
000000000000001f
[ 25.857975] RDX:
00000005f2028ea8 RSI:
ffffffff9ec5907f RDI:
ffffffff9ec62a5d
[ 25.865961] RBP:
00000005f2028ea8 R08:
0000000000000000 R09:
0000000000029d00
[ 25.873947] R10:
000000137b0e0508 R11:
ffff9858643294e4 R12:
ffff9858643336d0
[ 25.881935] R13:
ffffffff9ef74b00 R14:
0000000000000003 R15:
0000000000000000
[ 25.889918] cpuidle_enter+0x29/0x40
[ 25.893922] do_idle+0x24a/0x290
[ 25.897536] cpu_startup_entry+0x19/0x20
[ 25.901930] start_secondary+0x128/0x160
[ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb
[ 25.911983] ---[ end trace
b4c0c8195d0ba61f ]---
[ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.
Fixes:
67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Giacinto Cifelli [Tue, 26 Jan 2021 04:42:45 +0000 (05:42 +0100)]
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
lsusb -v for this device:
Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e2d
idProduct 0x0069
bcdDevice 0.00
iManufacturer 4 Cinterion Wireless Modules
iProduct 3 PLSx3
iSerial 5
fa3c1419
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 352
bNumInterfaces 10
bConfigurationValue 1
iConfiguration 2 Cinterion Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 3
CDC Union:
bMasterInterface 2
bSlaveInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 4
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 5
CDC Union:
bMasterInterface 4
bSlaveInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 6
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 7
CDC Union:
bMasterInterface 6
bSlaveInterface 7
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 8
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 0
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 8
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 6 Ethernet Networking
bInterfaceProtocol 0
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Ethernet:
iMacAddress 1
00A0C6C14190
bmEthernetStatistics 0x00000000
wMaxSegmentSize 16384
wNumberMCFilters 0x0001
bNumberPowerFilters 0
CDC Union:
bMasterInterface 8
bSlaveInterface 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 9
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 9
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 03:18:37 +0000 (19:18 -0800)]
Merge tag 'mlx5-fixes-2021-01-26' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-01-26
This series introduces some fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
net/mlx5: Maintain separate page trees for ECPF and PF functions
net/mlx5e: Fix IPSEC stats
net/mlx5e: Reduce tc unsupported key print level
net/mlx5e: free page before return
net/mlx5e: E-switch, Fix rate calculation for overflow
net/mlx5: Fix memory leak on flow table creation error flow
====================
Link: https://lore.kernel.org/r/20210126234345.202096-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan [Thu, 28 Jan 2021 01:34:42 +0000 (19:34 -0600)]
ibmvnic: Ensure that CRQ entry read are correctly ordered
Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.
Fixes:
032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 01:53:45 +0000 (17:53 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Honor stateful expressions defined in the set from the dynset
extension. The set definition provides a stateful expression
that must be used by the dynset expression in case it is specified.
2) Missing timeout extension in the set element in the dynset
extension leads to inconsistent ruleset listing, not allowing
the user to restore timeout and expiration on ruleset reload.
3) Do not dump the stateful expression from the dynset extension
if it coming from the set definition.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_dynset: dump expressions when set definition contains no expressions
netfilter: nft_dynset: add timeout extension to template
netfilter: nft_dynset: honor stateful expressions in set definition
====================
Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 01:51:45 +0000 (17:51 -0800)]
Merge tag 'linux-can-fixes-for-5.11-
20210127' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-01-27
The patch is by Dan Carpenter and fixes a potential information leak in
can_fill_info().
* tag 'linux-can-fixes-for-5.11-
20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: dev: prevent potential information leak in can_fill_info()
====================
Link: https://lore.kernel.org/r/20210127094028.2778793-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 27 Jan 2021 02:18:44 +0000 (18:18 -0800)]
MAINTAINERS: add missing header for bonding
include/net/bonding.h is missing from bonding entry.
Link: https://lore.kernel.org/r/20210127021844.4071706-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 01:44:51 +0000 (17:44 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Anthony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-01-26
This series contains updates to the ice, i40e, and igc driver.
Henry corrects setting an unspecified protocol to IPPROTO_NONE instead of
0 for IPv6 flexbytes filters for ice.
Nick fixes the IPv6 extension header being processed incorrectly and
updates the netdev->dev_addr if it exists in hardware as it may have been
modified outside the ice driver.
Brett ensures a user cannot request more channels than available LAN MSI-X
and fixes the minimum allocation logic as it was incorrectly trying to use
more MSI-X than allocated for ice.
Stefan Assmann minimizes the delay between getting and using the VSI
pointer to prevent a possible crash for i40e.
Corinna Vinschen fixes link speed advertising for igc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix link speed advertising
i40e: acquire VSI pointer only after VF is initialized
ice: Fix MSI-X vector fallback logic
ice: Don't allow more channels than LAN MSI-X available
ice: update dev_addr in ice_set_mac_address even if HW filter exists
ice: Implement flow for IPv6 next header (extension header)
ice: fix FDir IPv6 flexbyte
====================
Link: https://lore.kernel.org/r/20210126221035.658124-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 26 Jan 2021 00:02:14 +0000 (03:02 +0300)]
net: decnet: fix netdev refcount leaking on error path
On building the route there is an assumption that the destination
could be local. In this case loopback_dev is used to get the address.
If the address is still cannot be retrieved dn_route_output_slow
returns EADDRNOTAVAIL with loopback_dev reference taken.
Cannot find hash for the fixes tag because this code was introduced
long time ago. I don't think that this bug has ever fired but the
patch is done just to have a consistent code base.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Mon, 25 Jan 2021 12:41:16 +0000 (13:41 +0100)]
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.
The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).
Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.
This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.
To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.
Fixes:
9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes:
f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Thu, 21 Jan 2021 06:08:05 +0000 (09:08 +0300)]
can: dev: prevent potential information leak in can_fill_info()
The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.
Fixes:
52c793f24054 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jakub Kicinski [Wed, 27 Jan 2021 02:23:39 +0000 (18:23 -0800)]
Merge branch 'net-fec-fix-temporary-rmii-clock-reset-on-link-up'
Laurent Badel says:
====================
net: fec: Fix temporary RMII clock reset on link up
v2: fixed a compilation warning
The FEC drivers performs a "hardware reset" of the MAC module when the
link is reported to be up. This causes a short glitch in the RMII clock
due to the hardware reset clearing the receive control register which
controls the MII mode. It seems that some link partners do not tolerate
this glitch, and invalidate the link, which leads to a never-ending loop
of negotiation-link up-link down events.
This was observed with the iMX28 Soc and LAN8720/LAN8742 PHYs, with two
Intel adapters I218-LM and X722-DA2 as link partners, though a number of
other link partners do not seem to mind the clock glitch. Changing the
hardware reset to a software reset (clearing bit 1 of the ECR register)
cured the issue.
Attempts to optimize fec_restart() in order to minimize the duration of
the glitch were unsuccessful. Furthermore manually producing the glitch by
setting MII mode and then back to RMII in two consecutive instructions,
resulting in a clock glitch <10us in duration, was enough to cause the
partner to invalidate the link. This strongly suggests that the root cause
of the link being dropped is indeed the change in clock frequency.
In an effort to minimize changes to driver, the patch proposes to use
soft reset only for tested SoCs (iMX28) and only if the link is up. This
preserves hardware reset in other situations, which might be required for
proper setup of the MAC.
====================
Link: https://lore.kernel.org/r/20210125100745.5090-1-laurentbadel@eaton.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Laurent Badel [Mon, 25 Jan 2021 10:07:45 +0000 (11:07 +0100)]
net: fec: Fix temporary RMII clock reset on link up
fec_restart() does a hard reset of the MAC module when the link status
changes to up. This temporarily resets the R_CNTRL register which controls
the MII mode of the ENET_OUT clock. In the case of RMII, the clock
frequency momentarily drops from 50MHz to 25MHz until the register is
reconfigured. Some link partners do not tolerate this glitch and
invalidate the link causing failure to establish a stable link when using
PHY polling mode. Since as per IEEE802.3 the criteria for link validity
are PHY-specific, what the partner should tolerate cannot be assumed, so
avoid resetting the MII clock by using software reset instead of hardware
reset when the link is up. This is generally relevant only if the SoC
provides the clock to an external PHY and the PHY is configured for RMII.
Signed-off-by: Laurent Badel <laurentbadel@eaton.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xie He [Tue, 26 Jan 2021 04:09:39 +0000 (20:09 -0800)]
net: lapb: Add locking to the lapb module
In the lapb module, the timers may run concurrently with other code in
this module, and there is currently no locking to prevent the code from
racing on "struct lapb_cb". This patch adds locking to prevent racing.
1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and
"spin_unlock_bh" to APIs, timer functions and notifier functions.
2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us
able to ask running timers to abort; Modify "lapb_stop_t1timer" and
"lapb_stop_t2timer" to make them able to abort running timers;
Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them
abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer",
and "lapb_start_t1timer", "lapb_start_t2timer".
3. Let lapb_unregister wait for other API functions and running timers
to stop.
4. The lapb_device_event function calls lapb_disconnect_request. In
order to avoid trying to hold the lock twice, add a new function named
"__lapb_disconnect_request" which assumes the lock is held, and make
it called by lapb_disconnect_request and lapb_device_event.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Mon, 25 Jan 2021 07:44:16 +0000 (08:44 +0100)]
team: protect features update by RCU to avoid deadlock
Function __team_compute_features() is protected by team->lock
mutex when it is called from team_compute_features() used when
features of an underlying device is changed. This causes
a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device
is fired due to change propagated from team driver (e.g. MTU
change). It's because callbacks like team_change_mtu() or
team_vlan_rx_{add,del}_vid() protect their port list traversal
by team->lock mutex.
Example (r8169 case where this driver disables TSO for certain MTU
values):
...
[ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0
[ 6391.358602] team_device_event+0x9d/0x160 [team]
[ 6391.363756] notifier_call_chain+0x47/0x70
[ 6391.368329] netdev_update_features+0x56/0x60
[ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169]
[ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0
[ 6391.387022] dev_set_mtu+0x52/0x90
[ 6391.390820] team_change_mtu+0x64/0xf0 [team]
[ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0
[ 6391.399963] do_setlink+0x231/0xf50
...
In fact team_compute_features() called from team_device_event()
does not need to be protected by team->lock mutex and rcu_read_lock()
is sufficient there for port list traversal.
Fixes:
3d249d4ca7d0 ("net: introduce ethernet teaming device")
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 22 Jan 2021 17:32:20 +0000 (09:32 -0800)]
MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
David has been the de-facto maintainer for much of the IP code
for the last couple of years, let's make it official.
Link: https://lore.kernel.org/r/20210122173220.3579491-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Mon, 25 Jan 2021 15:31:26 +0000 (17:31 +0200)]
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
If a non nat tuple entry is inserted just to the regular tuples
rhashtable (ct_tuples_ht) and not to natted tuples rhashtable
(ct_nat_tuples_ht). Commit
bc562be9674b ("net/mlx5e: CT: Save ct entries
tuples in hashtables") mixed up the return labels and names sot that on
cleanup or failure we still try to remove for the natted tuples rhashtable.
Fix that by correctly checking if a natted tuples insertion
before removing it. While here make it more readable.
Fixes:
bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Fri, 11 Dec 2020 14:05:01 +0000 (16:05 +0200)]
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
Sometimes, channel params are changed without recreating the channels.
It happens in two basic cases: when the channels are closed, and when
the parameter being changed doesn't affect how channels are configured.
Such changes invoke a hardware command that might fail. The whole
operation should be reverted in such cases, but the code that restores
the parameters' values in the driver was missing. This commit adds this
handling.
Fixes:
2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Thu, 14 Jan 2021 10:34:01 +0000 (12:34 +0200)]
net/mlx5e: Revert parameters on errors when changing trust state without reset
Trust state may be changed without recreating the channels. It happens
when the channels are closed, and when channel parameters (min inline
mode) stay the same after changing the trust state. Changing the trust
state is a hardware command that may fail. The current code didn't
restore the channel parameters to their old values if an error happened
and the channels were closed. This commit adds handling for this case.
Fixes:
6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Fri, 11 Dec 2020 10:56:56 +0000 (12:56 +0200)]
net/mlx5e: Correctly handle changing the number of queues when the interface is down
This commit addresses two issues related to changing the number of
queues when the channels are closed:
1. Missing call to mlx5e_num_channels_changed to update
real_num_tx_queues when the number of TCs is changed.
2. When mlx5e_num_channels_changed returns an error, the channel
parameters must be reverted.
Two Fixes: tags correspond to the first commits where these two issues
were introduced.
Fixes:
3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Fixes:
fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Paul Blakey [Thu, 21 Jan 2021 08:06:45 +0000 (10:06 +0200)]
net/mlx5e: Fix CT rule + encap slow path offload and deletion
Currently, if a neighbour isn't valid when offloading tunnel encap rules,
we offload the original match and replace the original action with
"goto slow path" action. For this we use a temporary flow attribute based
on the original flow attribute and then change the action. Flow flags,
which among those is the CT flag, are still shared for the slow path rule
offload, so we end up parsing this flow as a CT + goto slow path rule.
Besides being unnecessary, CT action offload saves extra information in
the passed flow attribute, such as created ct_flow and mod_hdr, which
is lost onces the temporary flow attribute is freed.
When a neigh is updated and is valid, we offload the original CT rule
with original CT action, which again creates a ct_flow and mod_hdr
and saves it in the flow's original attribute. Then we delete the slow
path rule with a temporary flow attribute based on original updated
flow attribute, and we free the relevant ct_flow and mod_hdr.
Then when tc deletes this flow, we try to free the ct_flow and mod_hdr
on the flow's attribute again.
To fix the issue, skip all furture proccesing (CT/Sample/Split rules)
in offload/unoffload of slow path rules.
Call trace:
[ 758.850525] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000218
[ 758.952987] Internal error: Oops:
96000005 [#1] PREEMPT SMP
[ 758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O)
[ 758.964225] ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E)
[ 759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G OE 5.4.60-mlnx.52.gde81e85 #1
[ 759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan 4 2021
[ 759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[ 759.207344] pstate:
a0000005 (NzCv daif -PAN -UAO)
[ 759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[ 759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core]
[ 759.405858] Call trace:
[ 759.410804] mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[ 759.421337] __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core]
[ 759.433963] mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core]
[ 759.446942] mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core]
[ 759.457821] mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core]
[ 759.469051] mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core]
[ 759.481325] mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core]
[ 759.492901] mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core]
[ 759.504127] mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core]
[ 759.515314] process_one_work+0x178/0x400
[ 759.523350] worker_thread+0x58/0x3e8
[ 759.530685] kthread+0x100/0x12c
[ 759.537152] ret_from_fork+0x10/0x18
[ 759.544320] Code:
97ffef55 51000673 3100067f 54ffff41 (
b9421ab3)
[ 759.556548] ---[ end trace
fab818bb1085832d ]---
Fixes:
4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Sun, 24 Jan 2021 15:21:25 +0000 (17:21 +0200)]
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable
to control compilation of TC hardware offloads implementation.
When this configuration is disabled the driver is still wrongly
reports in ethtool that hw-tc-offload is supported.
Fixed by reporting hw-tc-offload is supported only when
CONFIG_MLX5_CLS_ACT is enabled.
Fixes:
d956873f908c ("net/mlx5e: Introduce kconfig var for TC support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Daniel Jurgens [Fri, 22 Jan 2021 21:13:53 +0000 (23:13 +0200)]
net/mlx5: Maintain separate page trees for ECPF and PF functions
Pages for the host PF and ECPF were stored in the same tree, so the ECPF
pages were being freed along with the host PF's when the host driver
unloaded.
Combine the function ID and ECPF flag to use as an index into the
x-array containing the trees to get a different tree for the host PF and
ECPF.
Fixes:
c6168161f693 ("net/mlx5: Add support for release all pages event")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Wed, 25 Nov 2020 11:52:36 +0000 (13:52 +0200)]
net/mlx5e: Fix IPSEC stats
When IPSEC offload isn't active, the number of stats is not zero, but
the strings are not filled, leading to exposing stats with empty names.
Fix this by using the same condition for NUM_STATS and FILL_STRS.
Fixes:
0aab3e1b04ae ("net/mlx5e: IPSec, Expose IPsec HW stat only for supporting HW")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Tue, 19 Jan 2021 15:21:38 +0000 (17:21 +0200)]
net/mlx5e: Reduce tc unsupported key print level
"Unsupported key used:" appears in kernel log when flows with
unsupported key are used, arp fields for example.
OpenVSwitch was changed to match on arp fields by default that
caused this warning to appear in kernel log for every arp rule, which
can be a lot.
Fix by lowering print level from warning to debug.
Fixes:
e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Pan Bian [Thu, 21 Jan 2021 04:58:30 +0000 (20:58 -0800)]
net/mlx5e: free page before return
Instead of directly return, goto the error handling label to free
allocated page.
Fixes:
5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Parav Pandit [Tue, 12 Jan 2021 14:13:22 +0000 (16:13 +0200)]
net/mlx5e: E-switch, Fix rate calculation for overflow
rate_bytes_ps is a 64-bit field. It passed as 32-bit field to
apply_police_params(). Due to this when police rate is higher
than 4Gbps, 32-bit calculation ignores the carry. This results
in incorrect rate configurationn the device.
Fix it by performing 64-bit calculation.
Fixes:
fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 12 Jan 2021 12:04:29 +0000 (14:04 +0200)]
net/mlx5: Fix memory leak on flow table creation error flow
When we create the ft object we also init rhltable in ft->fgs_hash.
So in error flow before kfree of ft we need to destroy that rhltable.
Fixes:
693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Tue, 26 Jan 2021 23:23:17 +0000 (15:23 -0800)]
Merge tag 'mac80211-for-net-2021-01-26' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of fixes:
* fix 160 MHz channel switch in mac80211
* fix a staging driver to not deadlock due to some
recent cfg80211 changes
* fix NULL-ptr deref if cfg80211 returns -EINPROGRESS
to wext (syzbot)
* pause TX in mac80211 in type change to prevent crashes
(syzbot)
* tag 'mac80211-for-net-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
staging: rtl8723bs: fix wireless regulatory API misuse
mac80211: pause TX while changing interface type
wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
mac80211: 160MHz with extended NSS BW in CSA
====================
Link: https://lore.kernel.org/r/20210126130529.75225-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 26 Jan 2021 23:16:39 +0000 (15:16 -0800)]
Merge tag 'wireless-drivers-2021-01-26' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.11
Second set of fixes for v5.11. Like in last time we again have more
fixes than usual Actually a bit too much for my liking in this state
of the cycle, but due to unrelated challenges I was only able to
submit them now.
We have few important crash fixes, iwlwifi modifying read-only data
being the most reported issue, and also smaller fixes to iwlwifi.
mt76
* fix a clang warning about enum usage
* fix rx buffer refcounting crash
mt7601u
* fix rx buffer refcounting crash
* fix crash when unbplugging the device
iwlwifi
* fix a crash where we were modifying read-only firmware data
* lots of smaller fixes all over the driver
* tag 'wireless-drivers-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: (24 commits)
mt7601u: fix kernel crash unplugging the device
iwlwifi: queue: bail out on invalid freeing
iwlwifi: mvm: guard against device removal in reprobe
iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
iwlwifi: mvm: clear IN_D3 after wowlan status cmd
iwlwifi: pcie: add rules to match Qu with Hr2
iwlwifi: mvm: invalidate IDs of internal stations at mvm start
iwlwifi: mvm: fix the return type for DSM functions 1 and 2
iwlwifi: pcie: reschedule in long-running memory reads
iwlwifi: pcie: use jiffies for memory read spin time limit
iwlwifi: pcie: fix context info memory leak
iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap
iwlwifi: pcie: set LTR on more devices
iwlwifi: queue: don't crash if txq->entries is NULL
iwlwifi: fix the NMI flow for old devices
iwlwifi: pnvm: don't try to load after failures
iwlwifi: pnvm: don't skip everything when not reloading
iwlwifi: pcie: avoid potential PNVM leaks
iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()
iwlwifi: mvm: skip power command when unbinding vif during CSA
...
====================
Link: https://lore.kernel.org/r/20210126092202.6A367C433CA@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 25 Jan 2021 15:09:49 +0000 (07:09 -0800)]
iwlwifi: provide gso_type to GSO packets
net/core/tso.c got recent support for USO, and this broke iwlfifi
because the driver implemented a limited form of GSO.
Providing ->gso_type allows for skb_is_gso_tcp() to provide
a correct result.
Fixes:
3d5b459ba0e3 ("net: tso: add UDP segmentation support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913
Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corinna Vinschen [Tue, 17 Nov 2020 19:50:40 +0000 (20:50 +0100)]
igc: fix link speed advertising
Link speed advertising in igc has two problems:
- When setting the advertisement via ethtool, the link speed is converted
to the legacy 32 bit representation for the intel PHY code.
This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being
beyond bit 31). As a result, any call to `ethtool -s ...' drops the
2500Mbit/s link speed from the PHY settings. Only reloading the driver
alleviates that problem.
Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the
Intel PHY ADVERTISE_2500_FULL bit explicitly.
- Rather than checking the actual PHY setting, the .get_link_ksettings
function always fills link_modes.advertising with all link speeds
the device is capable of.
Fix this by checking the PHY autoneg_advertised settings and report
only the actually advertised speeds up to ethtool.
Fixes:
8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stefan Assmann [Mon, 30 Nov 2020 13:12:57 +0000 (14:12 +0100)]
i40e: acquire VSI pointer only after VF is initialized
This change simplifies the VF initialization check and also minimizes
the delay between acquiring the VSI pointer and using it. As known by
the commit being fixed, there is a risk of the VSI pointer getting
changed. Therefore minimize the delay between getting and using the
pointer.
Fixes:
9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Thu, 21 Jan 2021 18:38:06 +0000 (10:38 -0800)]
ice: Fix MSI-X vector fallback logic
The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.
First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.
Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.
Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.
Fixes:
152b978a1f90 ("ice: Rework ice_ena_msix_range")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Thu, 21 Jan 2021 18:38:05 +0000 (10:38 -0800)]
ice: Don't allow more channels than LAN MSI-X available
Currently users could create more channels than LAN MSI-X available.
This is happening because there is no check against pf->num_lan_msix
when checking the max allowed channels and will cause performance issues
if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not
allowing more channels than LAN MSI-X available in pf->num_lan_msix.
Fixes:
87324e747fde ("ice: Implement ethtool ops for channels")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Nick Nunley [Sat, 21 Nov 2020 00:38:33 +0000 (16:38 -0800)]
ice: update dev_addr in ice_set_mac_address even if HW filter exists
Fix the driver to copy the MAC address configured in ndo_set_mac_address
into dev_addr, even if the MAC filter already exists in HW. In some
situations (e.g. bonding) the netdev's dev_addr could have been modified
outside of the driver, with no change to the HW filter, so the driver
cannot assume that they match.
Fixes:
757976ab16be ("ice: Fix check for removing/adding mac filters")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Nick Nunley [Sat, 21 Nov 2020 00:38:31 +0000 (16:38 -0800)]
ice: Implement flow for IPv6 next header (extension header)
This patch is based on a similar change to i40e by Slawomir Laba:
"i40e: Implement flow for IPv6 next header (extension header)".
When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.
The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6.
The extension header was not skipped at all.
The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.
Fixes:
a4e82a81f573 ("ice: Add support for tunnel offloads")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Henry Tieman [Sat, 21 Nov 2020 00:38:30 +0000 (16:38 -0800)]
ice: fix FDir IPv6 flexbyte
The packet classifier would occasionally misrecognize an IPv6 training
packet when the next protocol field was 0. The correct value for
unspecified protocol is IPPROTO_NONE.
Fixes:
165d80d6adab ("ice: Support IPv6 Flow Director filters")
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Johannes Berg [Tue, 26 Jan 2021 10:54:09 +0000 (11:54 +0100)]
staging: rtl8723bs: fix wireless regulatory API misuse
This code ends up calling wiphy_apply_custom_regulatory(), for which
we document that it should be called before wiphy_register(). This
driver doesn't do that, but calls it from ndo_open() with the RTNL
held, which caused deadlocks.
Since the driver just registers static regdomain data and then the
notifier applies the channel changes if any, there's no reason for
it to call this in ndo_open(), move it earlier to fix the deadlock.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes:
51d62f2f2c50 ("cfg80211: Save the regulatory domain with a lock")
Link: https://lore.kernel.org/r/20210126115409.d5fd6f8fe042.Ib5823a6feb2e2aa01ca1a565d2505367f38ad246@changeid
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 22 Jan 2021 16:11:16 +0000 (17:11 +0100)]
mac80211: pause TX while changing interface type
syzbot reported a crash that happened when changing the interface
type around a lot, and while it might have been easy to fix just
the symptom there, a little deeper investigation found that really
the reason is that we allowed packets to be transmitted while in
the middle of changing the interface type.
Disallow TX by stopping the queues while changing the type.
Fixes:
34d4bc4d41d2 ("mac80211: support runtime interface type changes")
Reported-by: syzbot+d7a3b15976bf7de2238a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210122171115.b321f98f4d4f.I6997841933c17b093535c31d29355be3c0c39628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 21 Jan 2021 16:16:22 +0000 (17:16 +0100)]
wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Since cfg80211 doesn't implement commit, we never really cared about
that code there (and it's configured out w/o CONFIG_WIRELESS_EXT).
After all, since it has no commit, it shouldn't return -EIWCOMMIT to
indicate commit is needed.
However, EIWCOMMIT is actually an alias for EINPROGRESS, which _can_
happen if e.g. we try to change the frequency but we're already in
the process of connecting to some network, and drivers could return
that value (or even cfg80211 itself might).
This then causes us to crash because dev->wireless_handlers is NULL
but we try to check dev->wireless_handlers->standard[0].
Fix this by also checking dev->wireless_handlers. Also simplify the
code a little bit.
Cc: stable@vger.kernel.org
Reported-by: syzbot+444248c79e117bc99f46@syzkaller.appspotmail.com
Reported-by: syzbot+8b2a88a09653d4084179@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210121171621.2076e4a37d5a.I5d9c72220fe7bb133fb718751da0180a57ecba4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Justin Iurman [Thu, 21 Jan 2021 22:00:44 +0000 (23:00 +0100)]
uapi: fix big endian definition of ipv6_rpl_sr_hdr
Following RFC 6554 [1], the current order of fields is wrong for big
endian definition. Indeed, here is how the header looks like:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
This patch reorders fields so that big endian definition is now correct.
[1] https://tools.ietf.org/html/rfc6554#section-3
Fixes:
cfa933d938d8 ("include: uapi: linux: add rpl sr header definition")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Sun, 17 Jan 2021 21:46:01 +0000 (22:46 +0100)]
mt7601u: fix kernel crash unplugging the device
The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.
Fix the issue enqueuing the skb only if usb_submit_urb() succeed.
Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:
ffffb4c88005bba8 EFLAGS:
00010206
RAX:
000000004ad483ee RBX:
ffff9a236625dee0 RCX:
000000000000662f
RDX:
000000000000000c RSI:
0000000000000000 RDI:
ffff9a2343179300
RBP:
ffff9a2343179300 R08:
0000000000000001 R09:
0000000000000000
R10:
ffff9a23748f7840 R11:
0000000000000001 R12:
ffff9a236625e4d4
R13:
ffff9a236625dee0 R14:
0000000000001080 R15:
0000000000000008
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fd410a34ef8 CR3:
00000001416ee001 CR4:
00000000001706f0
Call Trace:
mt7601u_tx_status+0x3e/0xa0 [mt7601u]
mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
mt7601u_cleanup+0x22/0x30 [mt7601u]
mt7601u_disconnect+0x22/0x60 [mt7601u]
usb_unbind_interface+0x8a/0x270
? kernfs_find_ns+0x35/0xd0
__device_release_driver+0x17a/0x230
device_release_driver+0x24/0x30
bus_remove_device+0xdb/0x140
device_del+0x18b/0x430
? kobject_put+0x98/0x1d0
usb_disable_device+0xc6/0x1f0
usb_disconnect.cold+0x7e/0x20a
hub_event+0xbf3/0x1870
process_one_work+0x1b6/0x350
worker_thread+0x53/0x3e0
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Fixes:
23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
Johannes Berg [Fri, 22 Jan 2021 12:52:42 +0000 (14:52 +0200)]
iwlwifi: queue: bail out on invalid freeing
If we find an entry without an SKB, we currently continue, but
that will just result in an infinite loop since we won't increment
the read pointer, and will try the same thing over and over again.
Fix this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
Johannes Berg [Fri, 22 Jan 2021 12:52:41 +0000 (14:52 +0200)]
iwlwifi: mvm: guard against device removal in reprobe
If we get into a problem severe enough to attempt a reprobe,
we schedule a worker to do that. However, if the problem gets
more severe and the device is actually destroyed before this
worker has a chance to run, we use a free device. Bump up the
reference count of the device until the worker runs to avoid
this situation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
Matti Gottlieb [Fri, 22 Jan 2021 12:52:40 +0000 (14:52 +0200)]
iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
The bit that indicates if the device supports 160MHZ
is bit #9. The macro checks bit #8.
Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Fixes:
d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.bddbf9b57a75.I16e09e2b1404b16bfff70852a5a654aa468579e2@changeid
Shaul Triebitz [Fri, 22 Jan 2021 12:52:39 +0000 (14:52 +0200)]
iwlwifi: mvm: clear IN_D3 after wowlan status cmd
In D3 resume flow, avoid the following race where sending
packets before updating the sequence number (sequence
number received from the wowlan status command response):
Thread 1:
__iwl_mvm_resume clears IWL_MVM_STATUS_IN_D3 and is cut
by thread 2 before reaching iwl_mvm_query_wakeup_reasons.
Thread 2:
iwl_mvm_mac_itxq_xmit calls iwl_mvm_tx_skb since
IWL_MVM_STATUS_IN_D3 is not set using a wrong sequence number.
Thread 1:
__iwl_mvm_resume continues and calls iwl_mvm_query_wakeup_reasons
updating the sequence number received from the firmware.
The next packet that will be sent now will cause sysassert 0x1096.
Fix the bug by moving 'clear IWL_MVM_STATUS_IN_D3' to after
sending the wowlan status command and updating the sequence
number.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.fe927ec939c6.I103d3321fb55da7e6c6c51582cfadf94eb8b6c58@changeid
Luca Coelho [Fri, 22 Jan 2021 12:52:38 +0000 (14:52 +0200)]
iwlwifi: pcie: add rules to match Qu with Hr2
Until now we have been relying on matching the PCI ID and subsystem
device ID in order to recognize Qu devices with Hr2. Add rules to
match these devices, so that we don't have to add a new rule for every
new ID we get.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
Gregory Greenman [Fri, 22 Jan 2021 12:52:37 +0000 (14:52 +0200)]
iwlwifi: mvm: invalidate IDs of internal stations at mvm start
Having sta_id not set for aux_sta and snif_sta can potentially lead to a
hard to debug issue in case remove station is called without an add. In
this case sta_id 0, an unrelated regular station, will be removed.
In fact, we do have a FW assert that occures rarely and from the debug
data analysis it looks like sta_id 0 is removed by mistake, though it's
hard to pinpoint the exact flow. The WARN_ON in this patch should help
to find it.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
Matt Chen [Fri, 22 Jan 2021 12:52:36 +0000 (14:52 +0200)]
iwlwifi: mvm: fix the return type for DSM functions 1 and 2
The return type value of functions 1 and 2 were considered to be an
integer inside a buffer, but they can also be only an integer, without
the buffer. Fix the code in iwl_acpi_get_dsm_u8() to handle it as a
single integer value, as well as packed inside a buffer.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Fixes:
9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5757092adcd6.Ic24524627b899c9a01af38107a62a626bdf5ae3a@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:58 +0000 (13:05 +0200)]
iwlwifi: pcie: reschedule in long-running memory reads
If we spin for a long time in memory reads that (for some reason in
hardware) take a long time, then we'll eventually get messages such
as
watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272]
This is because the reading really does take a very long time, and
we don't schedule, so we're hogging the CPU with this task, at least
if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y.
Previously I misinterpreted the situation and thought that this was
only going to happen if we had interrupts disabled, and then fixed
this (which is good anyway, however), but that didn't always help;
looking at it again now I realized that the spin unlock will only
reschedule if CONFIG_PREEMPT is used.
In order to avoid this issue, change the code to cond_resched() if
we've been spinning for too long here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
04516706bb99 ("iwlwifi: pcie: limit memory read spin time")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:57 +0000 (13:05 +0200)]
iwlwifi: pcie: use jiffies for memory read spin time limit
There's no reason to use ktime_get() since we don't need any better
precision than jiffies, and since we no longer disable interrupts
around this code (when grabbing NIC access), jiffies will work fine.
Use jiffies instead of ktime_get().
This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
in long-running memory reads". The code gets simpler with the weird clock use
etc. removed before we add cond_resched().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:56 +0000 (13:05 +0200)]
iwlwifi: pcie: fix context info memory leak
If the image loader allocation fails, we leak all the previously
allocated memory. Fix this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
Emmanuel Grumbach [Fri, 15 Jan 2021 11:05:55 +0000 (13:05 +0200)]
iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap
I hit a NULL pointer exception in this function when the
init flow went really bad.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:54 +0000 (13:05 +0200)]
iwlwifi: pcie: set LTR on more devices
To avoid completion timeouts during device boot, set up the
LTR timeouts on more devices - similar to what we had before
for AX210.
This also corrects the AX210 workaround to be done only on
discrete (non-integrated) devices, otherwise the registers
have no effect.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
Emmanuel Grumbach [Fri, 15 Jan 2021 11:05:53 +0000 (13:05 +0200)]
iwlwifi: queue: don't crash if txq->entries is NULL
The code was really awkward, we would first dereference
txq->entries when calling iwl_txq_genX_tfd_unmap and then
we would check that txq->entries is non-NULL.
Fix that by exiting if txq->entries is NULL.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.173359fc236d.I75c7c2397d20df8d7fbc24cb16a5232d5c551889@changeid
Emmanuel Grumbach [Fri, 15 Jan 2021 11:05:52 +0000 (13:05 +0200)]
iwlwifi: fix the NMI flow for old devices
I noticed that the flow that triggers an NMI on the firmware
for old devices (tested on 7265) doesn't work.
Apparently, the firmware / device is still in low power when
we write the register that triggers the NMI. We call the
"grab_nic_access" function to make sure the device is awake
but that wasn't enough. I played with this and noticed that
if we wait 1 ms after the device reports it is awake before
we write to the NMI register, the device always sees our
write and the firmware gets properly asserted.
Triggering an NMI to the firmware can be done with the
debugfs hook:
echo 1 > /sys/kernel/debug/iwlwifi/0000\:00\:03.0/iwlmvm/fw_nmi
What happened before is that the firmware would just stall
without running its NMI routine. Because of that the driver
wouldn't get the "firmware crashed" interrupt. After a while
the driver would notice that the firmware is not responding
to some command and it would read the error data from the
firmware, but this data is populated in the NMI service
routine in the firmware which was not called. So in the logs
it looked like:
iwlwifi 0000:00:03.0: Error sending REPLY_ERROR: time out after 2000ms.
iwlwifi 0000:00:03.0: Current CMD queue read_ptr 33 write_ptr 34
iwlwifi 0000:00:03.0: Loaded firmware version: 29.
09bd31e1.0 7265D-29.ucode
iwlwifi 0000:00:03.0: 0x00000000 | ADVANCED_SYSASSERT
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status0
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:03.0: 0x00000000 | branchlink2
iwlwifi 0000:00:03.0: 0x00000000 | interruptlink1
iwlwifi 0000:00:03.0: 0x00000000 | interruptlink2
iwlwifi 0000:00:03.0: 0x00000000 | data1
iwlwifi 0000:00:03.0: 0x00000000 | data2
iwlwifi 0000:00:03.0: 0x00000000 | data3
iwlwifi 0000:00:03.0: 0x00000000 | beacon time
iwlwifi 0000:00:03.0: 0x00000000 | tsf low
...
With this fix, immediately after we trigger the NMI to the
firmware, we get the expected:
iwlwifi 0000:00:03.0: Microcode SW error detected. Restarting 0x2000000.
iwlwifi 0000:00:03.0: Start IWL Error Log Dump:
iwlwifi 0000:00:03.0: Status: 0x00000040, count: 6
iwlwifi 0000:00:03.0: Loaded firmware version: 29.
09bd31e1.0 7265D-29.ucode
iwlwifi 0000:00:03.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
iwlwifi 0000:00:03.0: 0x000002F1 | trm_hw_status0
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:03.0: 0x00043D6C | branchlink2
iwlwifi 0000:00:03.0: 0x0004AFD6 | interruptlink1
iwlwifi 0000:00:03.0: 0x000008C4 | interruptlink2
iwlwifi 0000:00:03.0: 0x00000000 | data1
iwlwifi 0000:00:03.0: 0x00000080 | data2
iwlwifi 0000:00:03.0: 0x07030000 | data3
iwlwifi 0000:00:03.0: 0x003FD4C3 | beacon time
iwlwifi 0000:00:03.0: 0x00C22AC3 | tsf low
iwlwifi 0000:00:03.0: 0x00000000 | tsf hi
iwlwifi 0000:00:03.0: 0x00000000 | time gp1
iwlwifi 0000:00:03.0: 0x00C22AC3 | time gp2
iwlwifi 0000:00:03.0: 0x00000001 | uCode revision type
iwlwifi 0000:00:03.0: 0x0000001D | uCode version major
Notice the first line: "Microcode SW error detected:" which
is printed in the driver's ISR, which means that the driver
actually got an interrupt from the firmware saying that it
crashed. And then we have the properly populated error data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.70e67cc75d88.I6615cad4361862e7f3c9f2d3cafb6a8c61e16781@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:51 +0000 (13:05 +0200)]
iwlwifi: pnvm: don't try to load after failures
If loading the PNVM file failed on the first try during the
interface up, the file is unlikely to show up later, and we
already don't try to reload it if it changes, so just don't
try loading it again and again.
This also fixes some issues where we may try to load it at
resume time, which may not be possible yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:50 +0000 (13:05 +0200)]
iwlwifi: pnvm: don't skip everything when not reloading
Even if we don't reload the file from disk, we still need to
trigger the PNVM load flow with the device; fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.85ef56c4ef8c.I3b853ce041a0755d45e448035bef1837995d191b@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:49 +0000 (13:05 +0200)]
iwlwifi: pcie: avoid potential PNVM leaks
If we erroneously try to set the PNVM data again after it has
already been set, we could leak the old DMA memory. Avoid that
and warn, we shouldn't be doing this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
Johannes Berg [Fri, 15 Jan 2021 11:05:48 +0000 (13:05 +0200)]
iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()
We need to take the mutex to call iwl_mvm_get_sync_time(), do it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
Sara Sharon [Fri, 15 Jan 2021 11:05:47 +0000 (13:05 +0200)]
iwlwifi: mvm: skip power command when unbinding vif during CSA
In the new CSA flow, we remain associated during CSA, but
still do a unbind-bind to the vif. However, sending the power
command right after when vif is unbound but still associated
causes FW to assert (0x3400) since it cannot tell the LMAC id.
Just skip this command, we will send it again in a bit, when
assigning the new context.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
Pengcheng Yang [Sun, 24 Jan 2021 05:07:14 +0000 (13:07 +0800)]
tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN
Upon receiving a cumulative ACK that changes the congestion state from
Disorder to Open, the TLP timer is not set. If the sender is app-limited,
it can only wait for the RTO timer to expire and retransmit.
The reason for this is that the TLP timer is set before the congestion
state changes in tcp_ack(), so we delay the time point of calling
tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and
remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer
is set.
This commit has two additional benefits:
1) Make sure to reset RTO according to RFC6298 when receiving ACK, to
avoid spurious RTO caused by RTO timer early expires.
2) Reduce the xmit timer reschedule once per ACK when the RACK reorder
timer is set.
Fixes:
df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enke Chen [Fri, 22 Jan 2021 19:13:06 +0000 (11:13 -0800)]
tcp: make TCP_USER_TIMEOUT accurate for zero window probes
The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.
In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.
This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit
b701a99e431d ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").
Fixes:
9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 15:27:48 +0000 (07:27 -0800)]
NFC: fix resource leak when target index is invalid
Goto to the label put_dev instead of the label error to fix potential
resource leak on path that the target index is invalid.
Fixes:
c4fbb6515a4d ("NFC: The core part should generate the target index")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 15:37:45 +0000 (07:37 -0800)]
NFC: fix possible resource leak
Put the device to avoid resource leak on path that the polling flag is
invalid.
Fixes:
a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pali Rohár [Thu, 21 Jan 2021 15:02:44 +0000 (16:02 +0100)]
doc: networking: ip-sysctl: Document conf/all/disable_ipv6 and conf/default/disable_ipv6
This patch adds documentation for sysctl conf/all/disable_ipv6 and
conf/default/disable_ipv6 settings which is currently missing.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210121150244.20483-1-pali@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 14:57:38 +0000 (06:57 -0800)]
chtls: Fix potential resource leak
The dst entry should be released if no neighbour is found. Goto label
free_dst to fix the issue. Besides, the check of ndev against NULL is
redundant.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121145738.51091-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 12:33:43 +0000 (04:33 -0800)]
net: dsa: bcm_sf2: put device node before return
Put the device node dn before return error code on failure path.
Fixes:
461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 23 Jan 2021 20:34:24 +0000 (12:34 -0800)]
Merge branch 'fix-and-move-definitions-of-mrp-data-structures'
Rasmus Villemoes says:
====================
fix and move definitions of MRP data structures
We unnecessarily included packet structures of MRP in a uAPI header.
Turns out that some of them were in fact broken due to lack of packing,
so let's take this chance to remove them completely. Leave it to user
space to create its own, correct definitions. Said structures are not
used in the user space <> kernel communication.
====================
Link: https://lore.kernel.org/r/20210121204037.61390-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Thu, 21 Jan 2021 20:40:37 +0000 (21:40 +0100)]
net: mrp: move struct definitions out of uapi
None of these are actually used in the kernel/userspace interface -
there's a userspace component of implementing MRP, and userspace will
need to construct certain frames to put on the wire, but there's no
reason the kernel should provide the relevant definitions in a UAPI
header.
In fact, some of those definitions were broken until previous commit,
so only keep the few that are actually referenced in the kernel code,
and move them to the br_private_mrp.h header.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Thu, 21 Jan 2021 20:40:36 +0000 (21:40 +0100)]
net: mrp: fix definitions of MRP test packets
Wireshark says that the MRP test packets cannot be decoded - and the
reason for that is that there's a two-byte hole filled with garbage
between the "transitions" and "timestamp" members.
So Wireshark decodes the two garbage bytes and the top two bytes of
the timestamp written by the kernel as the timestamp value (which thus
fluctuates wildly), and interprets the lower two bytes of the
timestamp as a new (type, length) pair, which is of course broken.
Even though this makes the timestamp field in the struct unaligned, it
actually makes it end up on a 32 bit boundary in the frame as mandated
by the standard, since it is preceded by a two byte TLV header.
The struct definitions live under include/uapi/, but they are not
really part of any kernel<->userspace API/ABI, so fixing the
definitions by adding the packed attribute should not cause any
compatibility issues.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 12:20:37 +0000 (04:20 -0800)]
net: fec: put child node on error path
Also decrement the reference count of child device on error path.
Fixes:
3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 11:07:44 +0000 (03:07 -0800)]
net: stmmac: dwmac-intel-plat: remove config data on error
Remove the config data when rate setting fails.
Fixes:
9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kevin Hao [Thu, 21 Jan 2021 07:09:06 +0000 (15:09 +0800)]
net: octeontx2: Make sure the buffer is 128 byte aligned
The octeontx2 hardware needs the buffer to be 128 byte aligned.
But in the current implementation of napi_alloc_frag(), it can't
guarantee the return address is 128 byte aligned even the request size
is a multiple of 128 bytes, so we have to request an extra 128 bytes and
use the PTR_ALIGN() to make sure that the buffer is aligned correctly.
Fixes:
7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers")
Reported-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Giacinto Cifelli [Wed, 20 Jan 2021 04:56:50 +0000 (05:56 +0100)]
net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family
Bus 003 Device 009: ID 1e2d:006f
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e2d
idProduct 0x006f
bcdDevice 0.00
iManufacturer 3 Cinterion Wireless Modules
iProduct 2 PLSx3
iSerial 4
fa3c1419
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 303
bNumInterfaces 9
bConfigurationValue 1
iConfiguration 1 Cinterion Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 3
CDC Union:
bMasterInterface 2
bSlaveInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 4
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 5
CDC Union:
bMasterInterface 4
bSlaveInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 6
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 7
CDC Union:
bMasterInterface 6
bSlaveInterface 7
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 8
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Cc: stable@vger.kernel.org
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 21 Jan 2021 19:05:08 +0000 (11:05 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-01-21
1) Fix a rare panic on SMP systems when packet reordering
happens between anti replay check and update.
From Shmulik Ladkani.
2) Fix disable_xfrm sysctl when used on xfrm interfaces.
From Eyal Birger.
3) Fix a race in PF_KEY when the availability of crypto
algorithms is set. From Cong Wang.
4) Fix a return value override in the xfrm policy selftests.
From Po-Hsu Lin.
5) Fix an integer wraparound in xfrm_policy_addr_delta.
From Visa Hankala.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix wraparound in xfrm_policy_addr_delta()
selftests: xfrm: fix test return value override issue in xfrm_policy.sh
af_key: relax availability checks for skb size calculation
xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
xfrm: Fix oops in xfrm_replay_advance_bmp
====================
Link: https://lore.kernel.org/r/20210121121558.621339-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Bar [Tue, 22 Dec 2020 06:47:14 +0000 (08:47 +0200)]
mac80211: 160MHz with extended NSS BW in CSA
Upon receiving CSA with 160MHz extended NSS BW from associated AP,
STA should set the HT operation_mode based on new_center_freq_seg1
because it is later used as ccfs2 in ieee80211_chandef_vht_oper().
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20201222064714.24888-1-shay.bar@celeno.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Marek Vasut [Wed, 20 Jan 2021 03:05:02 +0000 (04:05 +0100)]
net: dsa: microchip: Adjust reset release timing to match reference reset circuit
KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended
circuit for interfacing with CPU/FPGA reset consisting of 10k pullup
resistor and 10uF capacitor to ground. This circuit takes ~100 ms to
rise enough to release the reset.
For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is
VDDIO - VIH
t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s
VDDIO
so we need ~95 ms for the reset to really de-assert, and then the
original 100us for the switch itself to come out of reset. Simply
msleep() for 100 ms which fits the constraint with a bit of extra
space.
Fixes:
5b797980908a ("net: dsa: microchip: Implement recommended reset timing")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Vasut [Wed, 20 Jan 2021 00:10:45 +0000 (01:10 +0100)]
net: dsa: microchip: ksz8795: Fix KSZ8794 port map again
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so
does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different
ID and port 3 not routed out, however the port 3 registers are present in
the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU
port {4}. Currently the driver always uses the last port as CPU port, on
KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port
3 and that is not OK, as it must also be port 4.
This patch adjusts the driver such that it always registers a switch with
5 ports total (4 external ports, 1 CPU port), always sets the CPU port to
switch port 4, and then configures the external port mask according to
the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765.
Fixes:
68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment")
Fixes:
4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible")
Fixes:
241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 20 Jan 2021 19:52:21 +0000 (11:52 -0800)]
Merge tag 'net-5.11-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"
* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: systemport: free dev before on error path
net: usb: cdc_ncm: don't spew notifications
net: mscc: ocelot: Fix multicast to the CPU port
tcp: Fix potential use-after-free due to double kfree()
bpf: Fix signed_{sub,add32}_overflows type handling
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
tcp: fix TCP socket rehash stats mis-accounting
net: dsa: b53: fix an off by one in checking "vlan->vid"
tcp: do not mess with cloned skbs in tcp_add_backlog()
selftests: net: fib_tests: remove duplicate log test
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
sh_eth: Fix power down vs. is_opened flag ordering
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
netfilter: rpfilter: mask ecn bits before fib lookup
udp: mask TOS bits in udp_v4_early_demux()
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
...
Linus Torvalds [Wed, 20 Jan 2021 19:46:38 +0000 (11:46 -0800)]
Merge tag 'for-linus-5.11-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for build failure showing up in some configurations"
* tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix 'nopvspin' build error
Tianjia Zhang [Tue, 19 Jan 2021 00:13:19 +0000 (00:13 +0000)]
X.509: Fix crash caused by NULL pointer
On the following call path, `sig->pkey_algo` is not assigned
in asymmetric_key_verify_signature(), which causes runtime
crash in public_key_verify_signature().
keyctl_pkey_verify
asymmetric_key_verify_signature
verify_signature
public_key_verify_signature
This patch simply check this situation and fixes the crash
caused by NULL pointer.
Fixes:
215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: João Fonseca <jpedrofonseca@ua.pt>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Wed, 20 Jan 2021 16:11:12 +0000 (16:11 +0000)]
cachefiles: Drop superfluous readpages aops NULL check
After the recent actions to convert readpages aops to readahead, the
NULL checks of readpages aops in cachefiles_read_or_alloc_page() may
hit falsely. More badly, it's an ASSERT() call, and this panics.
Drop the superfluous NULL checks for fixing this regression.
[DH: Note that cachefiles never actually used readpages, so this check was
never actually necessary]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245
Fixes:
9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Wed, 20 Jan 2021 17:16:01 +0000 (09:16 -0800)]
Merge tag 'linux-can-fixes-for-5.11-
20210120' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
linux-can-fixes-for-5.11-
20210120
All three patches are by Vincent Mailhol and fix a potential use after free bug
in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In
the TX-path the skb is used to read from after it was passed to the networking
stack with netif_rx_ni().
* tag 'linux-can-fixes-for-5.11-
20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
====================
Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 04:44:23 +0000 (20:44 -0800)]
net: systemport: free dev before on error path
On the error path, it should goto the error handling label to free
allocated memory rather than directly return.
Fixes:
31bc72d97656 ("net: systemport: fetch and use clock resources")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grant Grundler [Wed, 20 Jan 2021 01:12:08 +0000 (17:12 -0800)]
net: usb: cdc_ncm: don't spew notifications
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber:
000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...
Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alban Bedel [Tue, 19 Jan 2021 14:06:38 +0000 (15:06 +0100)]
net: mscc: ocelot: Fix multicast to the CPU port
Multicast entries in the MAC table use the high bits of the MAC
address to encode the ports that should get the packets. But this port
mask does not work for the CPU port, to receive these packets on the
CPU port the MAC_CPU_COPY flag must be set.
Because of this IPv6 was effectively not working because neighbor
solicitations were never received. This was not apparent before commit
9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb
entries) as the IPv6 entries were broken so all incoming IPv6
multicast was then treated as unknown and flooded on all ports.
To fix this problem rework the ocelot_mact_learn() to set the
MAC_CPU_COPY flag when a multicast entry that target the CPU port is
added. For this we have to read back the ports endcoded in the pseudo
MAC address by the caller. It is not a very nice design but that avoid
changing the callers and should make backporting easier.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Fixes:
9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries")
Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 18 Jan 2021 05:59:20 +0000 (14:59 +0900)]
tcp: Fix potential use-after-free due to double kfree()
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct
request_sock and then can allocate inet_rsk(req)->ireq_opt. After that,
tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to
inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full
socket into ehash and sets NULL to ireq_opt. Otherwise,
tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full
socket.
The commit
01770a1661657 ("tcp: fix race condition when creating child
sockets from syncookies") added a new path, in which more than one cores
create full sockets for the same SYN cookie. Currently, the core which
loses the race frees the full socket without resetting inet_opt, resulting
in that both sock_put() and reqsk_put() call kfree() for the same memory:
sock_put
sk_free
__sk_free
sk_destruct
__sk_destruct
sk->sk_destruct/inet_sock_destruct
kfree(rcu_dereference_protected(inet->inet_opt, 1));
reqsk_put
reqsk_free
__reqsk_free
req->rsk_ops->destructor/tcp_v4_reqsk_destructor
kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1));
Calling kmalloc() between the double kfree() can lead to use-after-free, so
this patch fixes it by setting NULL to inet_opt before sock_put().
As a side note, this kind of issue does not happen for IPv6. This is
because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which
correspond to ireq_opt in IPv4.
Fixes:
01770a166165 ("tcp: fix race condition when creating child sockets from syncookies")
CC: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 20 Jan 2021 16:47:34 +0000 (08:47 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-20
1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu.
2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann.
3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix signed_{sub,add32}_overflows type handling
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
====================
Link: https://lore.kernel.org/r/20210120163439.8160-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Tue, 19 Jan 2021 23:24:24 +0000 (00:24 +0100)]
bpf: Fix signed_{sub,add32}_overflows type handling
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
the signature of signed_sub_overflows() had s64 a and s64 b as its input args
whereas now they are truncated to s32. Thus restore proper types. Also, the case
of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both
have s32 as inputs, therefore align the former.
Fixes:
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:37 +0000 (20:41 +0900)]
can: peak_usb: fix use after free bugs
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the peak_usb_netif_rx_ni().
Reordering the lines solves the issue.
Fixes:
0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:36 +0000 (20:41 +0900)]
can: vxcan: vxcan_xmit: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the canfd_frame cfd which aliases skb memory is accessed
after the netif_rx_ni().
Fixes:
a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:35 +0000 (20:41 +0900)]
can: dev: can_restart: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the netif_rx_ni() in:
stats->rx_bytes += cf->len;
Reordering the lines solves the issue.
Fixes:
39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yuchung Cheng [Tue, 19 Jan 2021 19:26:19 +0000 (11:26 -0800)]
tcp: fix TCP socket rehash stats mis-accounting
The previous commit
32efcc06d2a1 ("tcp: export count for rehash attempts")
would mis-account rehashing SNMP and socket stats:
a. During handshake of an active open, only counts the first
SYN timeout
b. After handshake of passive and active open, stop updating
after (roughly) TCP_RETRIES1 recurring RTOs
c. After the socket aborts, over count timeout_rehash by 1
This patch fixes this by checking the rehash result from sk_rethink_txhash.
Fixes:
32efcc06d2a1 ("tcp: export count for rehash attempts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 19 Jan 2021 14:48:03 +0000 (17:48 +0300)]
net: dsa: b53: fix an off by one in checking "vlan->vid"
The > comparison should be >= to prevent accessing one element beyond
the end of the dev->vlans[] array in the caller function, b53_vlan_add().
The "dev->vlans" array is allocated in the b53_switch_init() function
and it has "dev->num_vlans" elements.
Fixes:
a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 19 Jan 2021 16:49:00 +0000 (08:49 -0800)]
tcp: do not mess with cloned skbs in tcp_add_backlog()
Heiner Kallweit reported that some skbs were sent with
the following invalid GSO properties :
- gso_size > 0
- gso_type == 0
This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2.
Juerg Haefliger was able to reproduce a similar issue using
a lan78xx NIC and a workload mixing TCP incoming traffic
and forwarded packets.
The problem is that tcp_add_backlog() is writing
over gso_segs and gso_size even if the incoming packet will not
be coalesced to the backlog tail packet.
While skb_try_coalesce() would bail out if tail packet is cloned,
this overwriting would lead to corruptions of other packets
cooked by lan78xx, sharing a common super-packet.
The strategy used by lan78xx is to use a big skb, and split
it into all received packets using skb_clone() to avoid copies.
The drawback of this strategy is that all the small skb share a common
struct skb_shared_info.
This patch rewrites TCP gso_size/gso_segs handling to only
happen on the tail skb, since skb_try_coalesce() made sure
it was not cloned.
Fixes:
4f693b55c3d2 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Juerg Haefliger <juergh@canonical.com>
Tested-by: Juerg Haefliger <juergh@canonical.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423
Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 19 Jan 2021 02:59:30 +0000 (10:59 +0800)]
selftests: net: fib_tests: remove duplicate log test
The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.
Reported-by: Antoine Tenart <atenart@redhat.com>
Fixes:
0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bongsu Jeon [Mon, 18 Jan 2021 20:55:22 +0000 (05:55 +0900)]
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0
but there is no parameters in NCI1.x.
Fixes:
bcd684aace34 ("net/nfc/nci: Support NCI 2.x initial sequence")
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Mon, 18 Jan 2021 15:08:12 +0000 (16:08 +0100)]
sh_eth: Fix power down vs. is_opened flag ordering
sh_eth_close() does a synchronous power down of the device before
marking it closed. Revert the order, to make sure the device is never
marked opened while suspended.
While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as
there is no reason to do a synchronous power down.
Fixes:
7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log