Catalin Marinas [Thu, 30 Apr 2009 16:06:09 +0000 (17:06 +0100)]
[ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch
This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2)
erratum. The BTAC/BTB is now flushed at every context switch.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 30 Apr 2009 16:06:03 +0000 (17:06 +0100)]
[ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail
This patch implements the recommended workaround for erratum 411920
(ARM1136, ARM1156, ARM1176).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 28 Apr 2009 20:41:01 +0000 (21:41 +0100)]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6
Russell King [Mon, 27 Apr 2009 17:06:24 +0000 (18:06 +0100)]
Merge branch 'for-rmk' of git://git./linux/kernel/git/khilman/linux-davinci
David Brownell [Wed, 15 Apr 2009 19:19:21 +0000 (14:19 -0500)]
davinci: DM644x: NAND: update partitioning
Update NAND partitioning for the dm6446 evm, unmasking the hidden
data at the beginning and letting the kernel be updated from Linux.
- This is boot-compatible with TI's software (U-Boot 1.20 and both
the 2.6.10 and 2.6.18 kernels), in terms of startup and loading
kernels from flash.
- In the same way, it's also boot-compatible with mainline U-Boot,
which stores U-Boot params in block 0 not block 16.
- It's not quite compatible with systems that previously used NAND
partitions to hold (filesystem) data. The compatibilities are a
bit different based on which kernel was used previously
+ Users of TI/MV kernels no longer see mtd2 "params"
(mainline u-boot env is in a different place)
* Filesystem is now mtd2 ... vs mtd3
+ Users of GIT kernels now see mtd0 and mtd1 partitions
* Filesystem partition starts 640 KBytes earlier
* Filesystem is now mtd2 ... vs mtd0
* Linux now *uses* the flash-resident BBT
* Removes annoying slowdown/hiccup during boot
* Potentially ~64KB less space available with TI/MV kernels
If you *used* NAND partitions from Linux, there is no solution that's
fully compatible with all previous kernels in those respects ... ergo
this "best compromise". It'd be good to back back up the filesystem
data; or, carry your own backwards-compatibility patch for awhile.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Kevin Hilman [Tue, 14 Apr 2009 16:30:11 +0000 (11:30 -0500)]
davinci: update DM644x support in preparation for more SoCs
Rework DM644x code into SoC specific and board specific parts.
This is also to generalize the structure a bit so it's easier to add
support for new SoCs in the DaVinci family.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Kevin Hilman [Tue, 14 Apr 2009 15:57:40 +0000 (10:57 -0500)]
davinci: DM644x: rename board file
Rename DM6446 EVM board file, no functional changes. Code is updated
and reworked in following patch.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Kevin Hilman [Tue, 14 Apr 2009 14:50:37 +0000 (09:50 -0500)]
davinci: update pin-multiplexing support
Update MUX support to be more general and useful across multiple
SoCs in the DaVinci family.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Kevin Hilman [Tue, 14 Apr 2009 13:04:26 +0000 (08:04 -0500)]
davinci: serial: generalize for more SoCs
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
s-paulraj@ti.com [Thu, 18 Sep 2008 19:35:00 +0000 (15:35 -0400)]
davinci: DM355 IRQ Definitions
Adding IRQ defintions for DaVinci DM355 and default interrupt
priorities for DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Sudhakar Rajashekhara [Tue, 14 Apr 2009 12:53:02 +0000 (07:53 -0500)]
davinci: DM646x: add interrupt number and priorities
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Mark A. Greer [Fri, 27 Mar 2009 02:33:21 +0000 (19:33 -0700)]
davinci: PSC: Clear bits in MDCTL reg before setting new bits
Clear any set bits in the 'NEXT' field of the MDCTL register in the
Power and Sleep Controller (PSC) before setting any new bits.
This also allows some minor cleanup by removing some no longer
needed lines of code.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
David Brownell [Sun, 7 Dec 2008 19:46:23 +0000 (11:46 -0800)]
davinci: gpio bugfixes
Update the DaVinci GPIO code to work better on non-dm6446 parts,
notably the dm355:
- Only handle the number of GPIOs the chip actually has. So
for example on dm6467, GPIO-42 is the last GPIO, and trying
to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446.
- Enable GPIO interrupts on each 16-bit GPIO-irq bank ...
previously, only the first five were enabled, so GPIO-80
and above (on dm355) wouldn't trigger IRQs.
- Use the right IRQ for each GPIO bank. The wrong values were
used for dm355 chips, so GPIO IRQs got routed incorrectly.
- Handle up to four pairs of 16-bit GPIO banks ... previously
only three were handled, so accessing GPIO-96 and up (e.g. on
dm355) would oops.
- Update several comments that were dm6446-specific.
Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs
on the DM355 EVM.
One thing this doesn't do is handle the way some of the GPIO
numbers on dm6467 are reserved but aren't valid as GPIOs. Some
bitmap logic could fix that if needed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Kevin Hilman [Tue, 14 Apr 2009 12:18:14 +0000 (07:18 -0500)]
davinci: add EDMA driver
Original code for 2.6.10 and 2.6.28 series done by Texas Instruments
and MontaVista, but major updates and rework done by Troy Kisky and
David Brownell.
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Kevin Hilman [Tue, 14 Apr 2009 12:06:37 +0000 (07:06 -0500)]
davinci: timers: use clk_get_rate()
Use clock framework instead of hard-coded CLOCK_TICK_RATE for
determining timer tick frequencies.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Eric Miao [Mon, 13 Apr 2009 03:06:49 +0000 (11:06 +0800)]
[ARM] pxa/littleton: add missing da9034 touchscreen support
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Wed, 22 Apr 2009 10:38:40 +0000 (18:38 +0800)]
[ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Wed, 22 Apr 2009 10:34:36 +0000 (18:34 +0800)]
[ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working
GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd
codec but unused on the board, yet they are initialized incorrectly by the
bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to
work. Fix this issue by configuring these pins as normal GPIO to avoid the
noise from these pins being treated as signals from the 2nd codec.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Fri, 6 Feb 2009 08:49:23 +0000 (16:49 +0800)]
[ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Philipp Zabel [Fri, 17 Apr 2009 09:37:10 +0000 (11:37 +0200)]
[ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol
cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as
CPU_FREQ is enabled.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Guennadi Liakhovetski [Thu, 16 Apr 2009 09:23:08 +0000 (11:23 +0200)]
[ARM] pxa: remove duplicate select statements from Kconfig
ARCH_PXA selects HAVE_CLK and COMMON_CLKDEV twice in arch/arm/Kconfig.
Remove the second entry.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Tue, 21 Apr 2009 06:39:07 +0000 (14:39 +0800)]
[ARM] pxa: fix issue of muxed GPIO irq_chip functions touching non-muxed GPIOs
pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs
(0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect.
Actually, only those bits should get updated if the corresponding bits are
set in c->irq_mask as well. Fix this by updating only those relevant bits.
Reported-and-tested-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Russell King [Sun, 26 Apr 2009 12:56:01 +0000 (13:56 +0100)]
[ARM] lart: fix build error
arch/arm/mach-sa1100/lart.c:36: error: 'PAGE_SHIFT' undeclared here (not in a function)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Fri, 24 Apr 2009 21:15:48 +0000 (22:15 +0100)]
Merge branch 'omap-fixes' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
Tony Lindgren [Fri, 24 Apr 2009 16:56:16 +0000 (09:56 -0700)]
Merge branch 'omap-clock-fixes' into omap-fixes
Linus Torvalds [Fri, 24 Apr 2009 15:54:30 +0000 (08:54 -0700)]
Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: add parameter to microblaze_read()
microblaze: Use CFLAGS_KERNEL instead of CFLAGS
microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too
microblaze: Do not check use_dcache
microblaze: Do not use PVR configuration for broken MB version
microblaze: Fix USR1/2 pvr printing message
microblaze: iowrite upon timeout
microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig
microblaze: Remove redundant variable
microblaze: Move start_thread to process.c
microblaze: Add missing preadv and pwritev syscalls
microblaze: Add missing declaration for die and _exception func
microblaze: Remove sparse error in traps.c
microblaze: Move task_pt_regs up
microblaze: Rename kernel_mode to pt_mode in pt_regs
microblaze: Remove uncache shadow condition
microblaze: Remove while(1) loop from show_regs function
microblaze: Remove unneded per cpu SYSCALL_SAVE variable
Linus Torvalds [Fri, 24 Apr 2009 15:48:17 +0000 (08:48 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
ACPI, i915: Register ACPI video even when not modesetting
Revert "ACPICA: delete check for AML access to port 0x81-83"
I/O port protection: update for windows compatibility.
sony-laptop: always try to unblock rfkill on load
sony-laptop: fix bogus error message display on resume
ACPI: EC: Fix ACPI EC resume non-query interrupt message
sony-laptop: SNC input event 38 fix
sony-laptop: SNC 127 Initialization Fix
sony-laptop: Duplicate SNC 127 Event Fix
ACPI: prevent processor.max_cstate=0 boot crash
ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
ACPI: delete obsolete "bus master activity" proc field
ACPI: idle: mark_tsc_unstable() at init-time, not run-time
ACPI: add /sys/firmware/acpi/interrupts/sci_not counter
ACPI video: fix an error when the brightness levels on AC and on Battery are same
acpi-cpufreq: Do not let get_measured perf depend on internal variable
acpi-cpufreq: style-only: add parens to math expression
acpi-cpufreq: Cleanup: Use printk_once
x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf
thinkpad-acpi: bump up version to 0.23
...
Linus Torvalds [Fri, 24 Apr 2009 15:45:53 +0000 (08:45 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: update the default config for the ColdFire 5407C3 board
m68knommu: update the default config for the ColdFire 5307C3 board
m68knommu: update the default config for the ColdFire 5257EVB board
m68knommu: update the default config for the ColdFire 5249EVB.
m68knommu: add a defconfig for the ColdFire M5272C3 board
m68knommu: update the defconfig for the ColdFire 5208evb board
m68knommu: fix DMA support for ColdFire
m68knommu: remove unused kernel stats offsets
m68knommu: fix missing .data.cacheline_aligned section
m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.
Linus Torvalds [Fri, 24 Apr 2009 15:37:40 +0000 (08:37 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix potential inode allocation soft lockup in Orlov allocator
ext4: Make the extent validity check more paranoid
jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records
jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records
ext4: really print the find_group_flex fallback warning only once
Linus Torvalds [Fri, 24 Apr 2009 15:36:41 +0000 (08:36 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5460/1: Orion: reduce namespace pollution
[ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config
[ARM] 5457/1: mach-imx gpio buildfix
[ARM] 5456/1: add sys_preadv and sys_pwritev
[ARM] pxa/pcm990: start external GPIOs immediately after built-in ones
[ARM] pxa/palm27x: General fix for Palm27x aSoC driver
[ARM] pxa/mioa701: use GPIO95 as AC97 reset line
[ARM] pxa: merge AC97 platform data structures
[ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
Linus Torvalds [Fri, 24 Apr 2009 15:36:06 +0000 (08:36 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: pwc : do not pass stack allocated buffers to USB core.
USB: otg: Fix bug on remove path without transceiver
USB: correct error handling in cdc-wdm
USB: removal of tty->low_latency hack dating back to the old serial code
USB: serial: sierra driver bug fix for composite interface
USB: gadget: omap_udc uses platform_driver_probe()
USB: ci13xxx_udc: fix build error
USB: musb: Prevent multiple includes of musb.h
USB: pass mem_flags to dma_alloc_coherent
USB: g_file_storage: fix use-after-free bug when closing files
USB: ehci-sched.c: EHCI SITD scheduling bugfix
USB: fix mos7840 problem with minor numbers
USB: mos7840: add new device id
USB: musb: fix build when !CONFIG_PM
USB: musb: Remove my email address from few musb related drivers
USB: Gadget: MIPS CI13xxx UDC bugfixes
USB: Unusual Device support for Gold MP3 Player Energy
USB: serial: fix lifetime and locking problems
Linus Torvalds [Fri, 24 Apr 2009 15:32:44 +0000 (08:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Larger buffer for encrypted symlink targets
eCryptfs: Lock lower directory inode mutex during lookup
eCryptfs: Remove ecryptfs_unlink_sigs warnings
eCryptfs: Fix data corruption when using ecryptfs_passthrough
eCryptfs: Print FNEK sig properly in /proc/mounts
eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev()
eCryptfs: Copy lower inode attrs before dentry instantiation
Linus Torvalds [Fri, 24 Apr 2009 15:32:23 +0000 (08:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Update defconfigs for 2.6.30-rc3
m68k,m68knommu: Wire up preadv and pwritev
scsi: a4000 - Correct driver unregistration in case of failure
Linus Torvalds [Fri, 24 Apr 2009 15:28:27 +0000 (08:28 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] update default configuration.
[S390] omit frame pointers on s390 when possible
[S390] Use tape_generic_offline directly.
[S390] /proc/stat idle field for idle cpus
[S390] appldata: avoid deadlock with appldata_mem
[S390] ipl: fix compile breakage
Linus Torvalds [Fri, 24 Apr 2009 15:27:02 +0000 (08:27 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Ensure that the inode goal block settings are updated
GFS2: Fix bug in block allocation
bitops: Add __ffs64 bitop
Linus Torvalds [Fri, 24 Apr 2009 15:26:01 +0000 (08:26 -0700)]
Merge branch 'kvm-updates/2.6.30' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Unregister cpufreq notifier on unload
KVM: x86: release time_page on vcpu destruction
KVM: Fix overlapping check for memory slots
KVM: MMU: disable global page optimization
KVM: ia64: fix locking order entering guest
KVM: MMU: Fix off-by-one calculating large page count
Linus Torvalds [Fri, 24 Apr 2009 15:16:05 +0000 (08:16 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bart/ide-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
MAINTAINERS: update IDE entry
palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
palm_bk3710: those registers/bitfields don't exist
mediabay: fix build for CONFIG_BLOCK=n
ide: Stop disks on reboot for laptop which cuts power
ide-cd: fix kernel crash on hppa regression
palm_bk3710: UDMA performance fix
Linus Torvalds [Fri, 24 Apr 2009 15:15:25 +0000 (08:15 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Add quirk for Packard Bell RS65
[ALSA] intel8x0: another attempt to fix ac97_clock measure routine
[ALSA] ac97_codec: increase timeout for analog subsections
ALSA: hda - Add quirks for Realtek codecs
ALSA: hda - Fix alc662_init_verbs
ALSA: keywest: Convert to new-style i2c driver
ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers
ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)
ALSA: us122l: add snd_us122l_free()
ASoC: Fix warning in wm9705
ASoC: OMAP: Update contact addresses
ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
ALSA: us122l: Fix signedness in comparisions
Alan Cox [Wed, 22 Apr 2009 14:03:15 +0000 (15:03 +0100)]
radio_si470x: Fix free memory corruption
The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...
Found by Dan Carpenter using Smatch
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Niels de Vos [Wed, 22 Apr 2009 14:02:44 +0000 (15:02 +0100)]
serial: remove contact data
Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Wed, 22 Apr 2009 14:02:23 +0000 (15:02 +0100)]
cafe_nand: Fix warning
Wrong types on IRQ handler
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Apr 2009 14:48:24 +0000 (07:48 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cfq-iosched: cache prio_tree root in cfqq->p_root
cfq-iosched: fix bug with aliased request and cooperation detection
cfq-iosched: clear ->prio_trees[] on cfqd alloc
block: fix intermittent dm timeout based oops
umem: fix request_queue lock warning
block: simplify I/O stat accounting
pktcdvd.h should include mempool.h
cfq-iosched: use the default seek distance when there aren't enough seek samples
cfq-iosched: make seek_mean converge more quickly
block: make blk_abort_queue() ignore non-request based devices
block: include empty disks in /proc/diskstats
bio: use bio_kmalloc() in copy/map functions
bio: fix bio_kmalloc()
block: fix queue bounce limit setting
block: fix SG_IO vector request data length handling
scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings
David Howells [Wed, 22 Apr 2009 11:10:07 +0000 (12:10 +0100)]
MN10300: Update the ASB2303 defconfig
Update the defconfig for the ASB2303 evaluation board.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Corbet [Wed, 22 Apr 2009 11:01:49 +0000 (12:01 +0100)]
Delete slow-work timers properly
Slow-work appears to delete its timer as soon as the first user
unregisters, even though other users could be active. At the same time, it
never seems to delete slow_work_oom_timer. Arrange for both to happen in
the shutdown path.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Apr 2009 14:46:51 +0000 (07:46 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
netfilter: ctnetlink: fix gcc warning during compilation
net/netrom: Fix socket locking
netlabel: Always remove the correct address selector
ucc_geth.c: Fix upsmr setting in RMII mode
8139too: fix HW initial flow
af_iucv: Fix race when queuing incoming iucv messages
af_iucv: Test additional sk states in iucv_sock_shutdown
af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
af_iucv: consider state IUCV_CLOSING when closing a socket
iwlwifi: DMA fixes
iwlwifi: add debugging for TX path
mwl8: fix build warning.
mac80211: fix alignment calculation bug
mac80211: do not print WARN if config interface
iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
iwlwifi: fix EEPROM validation mask to include OTP only devices
atmel: fix netdev ops conversion
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
...
Linus Torvalds [Fri, 24 Apr 2009 14:45:52 +0000 (07:45 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Fix bus type probing for ESP and LE devices.
sparc32: Update defconfig.
sparc64: Update defconfig.
Linus Torvalds [Fri, 24 Apr 2009 14:44:58 +0000 (07:44 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc: Fix modular build of ide-pmac when mediabay is built in
powerpc/pasemi: Fix build error on UP
powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
maintainers: Fix PS3 patterns
powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
powerpc/32: Don't clobber personality flags on exec
powerpc: Fix crash on CPU hotplug
powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
powerpc/85xx: Added SMP defconfig
powerpc/85xx: Enabled a bunch of FSL specific drivers/options
powerpc/85xx: Updated generic mpc85xx_defconfig
powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
fsl_rio: Pass the proper device to dma mapping routines
powerpc: Fix of_node_put() exit path in of_irq_map_one()
powerpc/5200: defconfig updates
powerpc/5200: Add FLASH nodes to lite5200 device tree
powerpc/device-tree: Document MTD nodes with multiple "reg" tuples
powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of
powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back
Len Brown [Fri, 24 Apr 2009 14:42:29 +0000 (10:42 -0400)]
Merge branch 'bjorn.button' into release
Len Brown [Fri, 24 Apr 2009 14:42:21 +0000 (10:42 -0400)]
Merge branch 'bugzilla-13036' into release
Len Brown [Fri, 24 Apr 2009 14:42:11 +0000 (10:42 -0400)]
Merge branch 'bugzilla-13048' into release
Len Brown [Fri, 24 Apr 2009 14:42:03 +0000 (10:42 -0400)]
Merge branch 'bugzilla-13142' into release
Len Brown [Fri, 24 Apr 2009 14:41:31 +0000 (10:41 -0400)]
Merge branch 'hpet' into release
Oleg Nesterov [Thu, 23 Apr 2009 23:02:45 +0000 (01:02 +0200)]
check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/
write_lock(¤t->fs->lock) guarantees we can't wrongly miss
LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock()
instead of ->siglock to iterate over the sub-threads. We must see
all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it
takes fs->lock too.
With or without this patch we can miss the freshly cloned thread
and set LSM_UNSAFE_SHARE, we don't care.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
[ Fixed lock/unlock typo - Hugh ]
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Thu, 23 Apr 2009 23:01:56 +0000 (01:01 +0200)]
do_execve() must not clear fs->in_exec if it was set by another thread
If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:
Two threads T1 and T2 and another process P, all share the same
->fs.
T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
->fs is shared, we set LSM_UNSAFE but not ->in_exec.
P exits and decrements fs->users.
T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
shared, we set fs->in_exec.
T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
return to the user-space.
T1 does clone(CLONE_FS /* without CLONE_THREAD */).
T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
another process.
Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.
When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.
Also, we do not need fs->lock to clear fs->in_exec.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Thu, 23 Apr 2009 10:19:38 +0000 (12:19 +0200)]
cfq-iosched: cache prio_tree root in cfqq->p_root
Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.
Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Thu, 23 Apr 2009 10:14:56 +0000 (12:14 +0200)]
cfq-iosched: fix bug with aliased request and cooperation detection
cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.
cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Thu, 23 Apr 2009 10:13:27 +0000 (12:13 +0200)]
cfq-iosched: clear ->prio_trees[] on cfqd alloc
Not strictly needed, but we should make it clear that we init the
rbtree roots here.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Hannes Reinecke [Thu, 23 Apr 2009 08:32:59 +0000 (10:32 +0200)]
block: fix intermittent dm timeout based oops
Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame. This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window). Fix this by splicing back from
the ususally empty list to the q->timeout_list.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Sage Weil [Thu, 23 Apr 2009 06:37:58 +0000 (08:37 +0200)]
umem: fix request_queue lock warning
The umem driver issues two warnings on boot, due to blk_plug_device() and
blk_remove_plug() being called without q->queue_lock held. Starting with
e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions
warn if q->queue_lock doesn't appear to be locked. In fact, q->queue_lock
is NULL (though that apparently isn't otherwise a problem as the driver is
using card->lock for everything).
Although blk_init_queue() with take a request_fn_proc and spinlock_t*,
there isn't a corresponding init helper that takes a make_request_fn.
Setting queue_lock to &card->lock explicitly seems to work fine for me.
The warning goes away and the device appears to behave.
[ 1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))
[ 1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100)
[ 1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE)
[ 1.571114] umem 0000:02:01.0: Window size
16777216 bytes, IRQ 20
[ 1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device.
[ 1.585989] umema:<4>------------[ cut here ]------------
[ 1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106()
[ 1.592025] Hardware name: H8SSL
[ 1.592025] Modules linked in:
[ 1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8
[ 1.592025] Call Trace:
[ 1.592025] [<
ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[ 1.592025] [<
ffffffff8025a5b5>] ? save_trace+0x3f/0x9b
[ 1.592025] [<
ffffffff8025a68b>] ? add_lock_to_list+0x7a/0xba
[ 1.592025] [<
ffffffff8025e609>] ? validate_chain+0xb3b/0xce8
[ 1.592025] [<
ffffffff80441556>] ? mm_make_request+0x27/0x59
[ 1.592025] [<
ffffffff80441556>] ? mm_make_request+0x27/0x59
[ 1.592025] [<
ffffffff8025ef04>] ? __lock_acquire+0x74e/0x7b9
[ 1.592025] [<
ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[ 1.592025] [<
ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[ 1.592025] [<
ffffffff80441556>] ? mm_make_request+0x27/0x59
[ 1.592025] [<
ffffffff803ad165>] blk_plug_device+0x6d/0x106
[ 1.592025] [<
ffffffff80441575>] mm_make_request+0x46/0x59
[ 1.592025] [<
ffffffff803ac2d9>] generic_make_request+0x335/0x3cf
[ 1.592025] [<
ffffffff8027fcc7>] ? mempool_alloc_slab+0x11/0x13
[ 1.592025] [<
ffffffff8027fdce>] ? mempool_alloc+0x45/0x101
[ 1.592025] [<
ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[ 1.592025] [<
ffffffff803adda5>] submit_bio+0x10a/0x119
[ 1.592025] [<
ffffffff802c8d00>] submit_bh+0xe5/0x109
[ 1.592025] [<
ffffffff802cbf43>] block_read_full_page+0x2aa/0x2cb
[ 1.592025] [<
ffffffff802cf4c4>] ? blkdev_get_block+0x0/0x4c
[ 1.592025] [<
ffffffff805c90a8>] ? _spin_unlock_irq+0x36/0x51
[ 1.592025] [<
ffffffff80286836>] ? __lru_cache_add+0x92/0xb2
[ 1.592025] [<
ffffffff802cf008>] blkdev_readpage+0x13/0x15
[ 1.592025] [<
ffffffff8027de06>] read_cache_page_async+0x90/0x134
[ 1.592025] [<
ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[ 1.592025] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.592025] [<
ffffffff8027deb8>] read_cache_page+0xe/0x45
[ 1.592025] [<
ffffffff802f5170>] read_dev_sector+0x2e/0x93
[ 1.592025] [<
ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[ 1.592025] [<
ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[ 1.592025] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.592025] [<
ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[ 1.592025] [<
ffffffff802ceae9>] __blkdev_get+0x259/0x336
[ 1.592025] [<
ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[ 1.592025] [<
ffffffff802cebd1>] blkdev_get+0xb/0xd
[ 1.592025] [<
ffffffff802f5773>] register_disk+0xc4/0x12b
[ 1.592025] [<
ffffffff803b2a7b>] add_disk+0xc3/0x12d
[ 1.592025] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.592025] [<
ffffffff808a1e73>] mm_init+0x129/0x1a5
[ 1.592025] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.592025] [<
ffffffff80209056>] _stext+0x56/0x130
[ 1.592025] [<
ffffffff80274932>] ? register_irq_proc+0xae/0xca
[ 1.592025] [<
ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[ 1.592025] [<
ffffffff8087f975>] kernel_init+0x132/0x18b
[ 1.592025] [<
ffffffff8020d17a>] child_rip+0xa/0x20
[ 1.592025] [<
ffffffff8020cb40>] ? restore_args+0x0/0x30
[ 1.592025] [<
ffffffff8087f843>] ? kernel_init+0x0/0x18b
[ 1.592025] [<
ffffffff8020d170>] ? child_rip+0x0/0x20
[ 1.592025] ---[ end trace
7150b3b86da74e1e ]---
[ 1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91()
[ 1.893848] Hardware name: H8SSL
[ 1.893848] Modules linked in:
[ 1.893848] Pid: 1, comm: swapper Tainted: G W 2.6.29 #8
[ 1.893848] Call Trace:
[ 1.893848] [<
ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[ 1.893848] [<
ffffffff805c8411>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 1.893848] [<
ffffffff8020cb40>] ? restore_args+0x0/0x30
[ 1.893848] [<
ffffffff80254245>] ? __atomic_notifier_call_chain+0x0/0xb2
[ 1.893848] [<
ffffffff805c90a3>] ? _spin_unlock_irq+0x31/0x51
[ 1.893848] [<
ffffffff805c90bf>] ? _spin_unlock_irq+0x4d/0x51
[ 1.893848] [<
ffffffff8044157d>] ? mm_make_request+0x4e/0x59
[ 1.893848] [<
ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[ 1.893848] [<
ffffffff8025a75d>] ? put_lock_stats+0x25/0x27
[ 1.893848] [<
ffffffff80441504>] ? mm_unplug_device+0x25/0x50
[ 1.893848] [<
ffffffff803acf23>] blk_remove_plug+0x5f/0x91
[ 1.893848] [<
ffffffff8044150f>] mm_unplug_device+0x30/0x50
[ 1.893848] [<
ffffffff803ab74a>] blk_unplug+0x78/0x7d
[ 1.893848] [<
ffffffff803ab75c>] blk_backing_dev_unplug+0xd/0xf
[ 1.893848] [<
ffffffff802c853c>] block_sync_page+0x4a/0x4c
[ 1.893848] [<
ffffffff8027da1c>] sync_page+0x44/0x4d
[ 1.893848] [<
ffffffff805c66fd>] __wait_on_bit_lock+0x42/0x8a
[ 1.893848] [<
ffffffff8027d9d8>] ? sync_page+0x0/0x4d
[ 1.893848] [<
ffffffff8027d9c4>] __lock_page+0x64/0x6b
[ 1.893848] [<
ffffffff802508db>] ? wake_bit_function+0x0/0x2a
[ 1.893848] [<
ffffffff8027de4a>] read_cache_page_async+0xd4/0x134
[ 1.893848] [<
ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[ 1.893848] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.893848] [<
ffffffff8027deb8>] read_cache_page+0xe/0x45
[ 1.893848] [<
ffffffff802f5170>] read_dev_sector+0x2e/0x93
[ 1.893848] [<
ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[ 1.893848] [<
ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[ 1.893848] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.893848] [<
ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[ 1.893848] [<
ffffffff802ceae9>] __blkdev_get+0x259/0x336
[ 1.893848] [<
ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[ 1.893848] [<
ffffffff802cebd1>] blkdev_get+0xb/0xd
[ 1.893848] [<
ffffffff802f5773>] register_disk+0xc4/0x12b
[ 1.893848] [<
ffffffff803b2a7b>] add_disk+0xc3/0x12d
[ 1.893848] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.893848] [<
ffffffff808a1e73>] mm_init+0x129/0x1a5
[ 1.893848] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.893848] [<
ffffffff80209056>] _stext+0x56/0x130
[ 1.893848] [<
ffffffff80274932>] ? register_irq_proc+0xae/0xca
[ 1.893848] [<
ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[ 1.893848] [<
ffffffff8087f975>] kernel_init+0x132/0x18b
[ 1.893848] [<
ffffffff8020d17a>] child_rip+0xa/0x20
[ 1.893848] [<
ffffffff8020cb40>] ? restore_args+0x0/0x30
[ 1.893848] [<
ffffffff8087f843>] ? kernel_init+0x0/0x18b
[ 1.893848] [<
ffffffff8020d170>] ? child_rip+0x0/0x20
[ 1.893848] ---[ end trace
7150b3b86da74e1f ]---
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jerome Marchand [Wed, 22 Apr 2009 12:01:49 +0000 (14:01 +0200)]
block: simplify I/O stat accounting
This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.
Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Alexander Beregalov [Tue, 21 Apr 2009 07:33:14 +0000 (09:33 +0200)]
pktcdvd.h should include mempool.h
Fix this build error:
In file included from fs/compat_ioctl.c:104:
include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Len Brown [Fri, 24 Apr 2009 05:35:46 +0000 (01:35 -0400)]
Merge branch 'bugzilla-12249' into release
Len Brown [Fri, 24 Apr 2009 05:35:33 +0000 (01:35 -0400)]
Merge branch 'bugzilla-12270' into release
Len Brown [Fri, 24 Apr 2009 05:35:24 +0000 (01:35 -0400)]
Merge branch 'bugzilla-13041' into release
Len Brown [Fri, 24 Apr 2009 05:35:15 +0000 (01:35 -0400)]
Merge branch 'cpufreq' into release
Len Brown [Fri, 24 Apr 2009 05:35:08 +0000 (01:35 -0400)]
Merge branch 'idle' into release
Len Brown [Fri, 24 Apr 2009 05:34:59 +0000 (01:34 -0400)]
Merge branch 'irq' into release
Len Brown [Fri, 24 Apr 2009 05:34:52 +0000 (01:34 -0400)]
Merge branch 'sony-laptop' into release
Len Brown [Fri, 24 Apr 2009 05:34:45 +0000 (01:34 -0400)]
Merge branch 'thermal-regression' into release
Len Brown [Fri, 24 Apr 2009 05:34:37 +0000 (01:34 -0400)]
Merge branch 'thinkpad-acpi' into release
Len Brown [Fri, 24 Apr 2009 05:34:29 +0000 (01:34 -0400)]
Merge branch 'video-ac-dc' into release
Matthew Garrett [Wed, 15 Apr 2009 20:46:36 +0000 (21:46 +0100)]
ACPI, i915: Register ACPI video even when not modesetting
The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.
http://bugzilla.kernel.org/show_bug.cgi?id=13048
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 24 Apr 2009 04:32:52 +0000 (00:32 -0400)]
Revert "ACPICA: delete check for AML access to port 0x81-83"
This reverts commit
fdbdc7fc79c02ae4ede869d514179a2c65633d28.
That temporary quick-fix is no longer necessary,
as the previous patch,
a65131e942e25c707a652fa4ec2cfcd8b63fec11,
"I/O port protection: update for windows compatibility"
should handle this issue for all ports, including this one.
Signed-off-by: Len Brown <len.brown@intel.com>
Lin Ming [Thu, 16 Apr 2009 07:18:16 +0000 (15:18 +0800)]
I/O port protection: update for windows compatibility.
For windows compatibility,
1) On a port protection violation, simply ignore the request and
do not return an exception (allow the control method to continue execution.)
2) If only part of the request overlaps a protected port,
read/write the individual ports that are not protected.
http://bugzilla.kernel.org/show_bug.cgi?id=13036
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Mattia Dongili [Sun, 12 Apr 2009 11:26:31 +0000 (11:26 +0000)]
sony-laptop: always try to unblock rfkill on load
This fixes an inconsistent behaviour when loading the driver with the
switch on or off. In the former case you would also need to soft unblock
the switch via the sysfs file entries to really disable rfkill, in the
latter you wouldn't.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Cc: Matthias Welwarsky <matze@welwarsky.de>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Mattia Dongili [Sun, 12 Apr 2009 11:26:30 +0000 (11:26 +0000)]
sony-laptop: fix bogus error message display on resume
sony_backlight_update_status returns 0 on success -1 on failure (i.e.: the
return value from acpi_callsetfunc. The return value in the resume path
was broken and thus always displaying a bogus warning about not being able
to restore the brightness level.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Almer S. Tigelaar [Sun, 12 Apr 2009 11:26:29 +0000 (11:26 +0000)]
ACPI: EC: Fix ACPI EC resume non-query interrupt message
When resuming from standby (on a laptop) I see the following message in
my kernel.log:
"ACPI: EC: non-query interrupt received, switching to interrupt mode"
This apparently prevented sony-laptop to properly restore the brightness
level on resume.
The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the
GPE mode bit, but this is not restored in acpi_ec_resume (the function
below it). The patch below fixes this by properly restoring the GPE_MODE
bit. Tested and confirmed to work.
Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Almer S. Tigelaar [Sun, 12 Apr 2009 11:26:28 +0000 (11:26 +0000)]
sony-laptop: SNC input event 38 fix
Fixes the "unknown input event 38" messages. ANYBUTTON_RELEASED is now
treated the same way as FN_KEY_RELEASED.
Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Almer S. Tigelaar [Sun, 12 Apr 2009 11:26:27 +0000 (11:26 +0000)]
sony-laptop: SNC 127 Initialization Fix
Fixes additional special key initialization for SNC 127 key events.
Verified / tested on a Sony VAIO SR model.
Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Almer S. Tigelaar [Sun, 12 Apr 2009 11:26:26 +0000 (11:26 +0000)]
sony-laptop: Duplicate SNC 127 Event Fix
Fixes a duplicate mapping in the SNC sony_127_events structure.
Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 24 Apr 2009 03:21:29 +0000 (23:21 -0400)]
ACPI: prevent processor.max_cstate=0 boot crash
As processor.max_cstate is an init-time-only modparam,
sanity checking it at init-time is sufficient.
http://bugzilla.kernel.org/show_bug.cgi?id=13142
Signed-off-by: Len Brown <len.brown@intel.com>
Paul Walmsley [Fri, 24 Apr 2009 03:11:10 +0000 (21:11 -0600)]
OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files
Add a function omap2_gp_clockevent_set_gptimer() for board-*.c files
to use in .init_irq functions to configure the system tick GPTIMER.
Practical choices at this point are GPTIMER1 or GPTIMER12. Both of
these timers are in the WKUP powerdomain, and so are unaffected by
chip power management. GPTIMER1 can use sys_clk as a source, for
applications where a high-resolution timer is more important than
power management. GPTIMER12 has the special property that it has the
secure 32kHz oscillator as its source clock, which may be less prone
to glitches than the off-chip 32kHz oscillator. But on HS devices, it
may not be available for Linux use.
It appears that most boards are fine with GPTIMER1, but BeagleBoard
should use GPTIMER12 when using a 32KiHz timer source, due to hardware bugs
in revisions B4 and below. Modify board-omap3beagle.c to use GPTIMER12.
This patch originally used a Kbuild config option to select the GPTIMER,
but was changed to allow this to be specified in board-*.c files, per
Tony's request.
Kalle Vallo <kalle.valo@nokia.com> found a bug in an earlier version of
this patch - thanks Kalle.
Tested on Beagle rev B4 ES2.1, with and without CONFIG_OMAP_32K_TIMER, and
3430SDP.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Kalle Valo <kalle.valo@nokia.com>
Kevin Hilman [Fri, 24 Apr 2009 03:11:08 +0000 (21:11 -0600)]
OMAP: dmtimer: enable all timers to be wakeup events
All GP timers on OMAP2/3 can generate wakeup events. The wakeup status is
cleared in the PRCM interrupt handler.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Paul Walmsley [Fri, 24 Apr 2009 03:11:08 +0000 (21:11 -0600)]
OMAP3 GPTIMER: fix GPTIMER12 IRQ
GPTIMER12 IRQ is at IRQ 95 on OMAP3, unlike OMAP2. (ref: OMAP34xx
Multimedia High Security (HS) Device Silicon Revision 3.0 Security
Addendum Rev. B, SWPU119B)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arun KS [Fri, 24 Apr 2009 03:11:07 +0000 (21:11 -0600)]
OMAP1: clock: Typo fix for clock in omap1
Typo error when requesting for clock for dsp in omap1
Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Sergio Aguirre [Fri, 24 Apr 2009 03:11:07 +0000 (21:11 -0600)]
OMAP3: clock: Camera module doesn't have IDLEST bit
This patch avoids waiting for the camera module to become ready,
since it doesn't have IDLEST bit.
Based on a earlier hack done by Paul Walmsley on Sep 9 2008 on
linux-omap tree.
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Paul Walmsley [Fri, 24 Apr 2009 03:11:06 +0000 (21:11 -0600)]
OMAP2xxx clock: fix broken cpu_mask code
Commit
8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 breaks the OMAP2xxx
cpu_mask code, which causes OMAP2xxx to panic on boot. Fix by
removing the cpu_mask auto variable and by changing CK_242X
and CK_243X to use RATE_IN_242X/RATE_IN_243X.
Resolves
<1>Unable to handle kernel NULL pointer dereference at virtual address
0000000c
<1>pgd =
c0004000
<1>[
0000000c] *pgd=
00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0 Not tainted (2.6.29-omap1 #32)
PC is at omap2_clk_set_parent+0x104/0x120
LR is at omap2_clk_set_parent+0x28/0x120
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Len Brown [Thu, 23 Apr 2009 22:59:43 +0000 (18:59 -0400)]
ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
Linux tells ICH4 users that they can (manually) invoke
"hpet=force" to enable the undocumented ICH-4M HPET.
The HPET becomes available for both clocksource and clockevents.
But as of
ff69f2bba67bd45514923aaedbf40fe351787c59
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
the HPET may be used via clocksource for idle accounting, and
hpet=force on an ICH4 box hangs boot.
It turns out that touching the MMIO HPET withing
the ARB_DIS part of C3 will hang the hardware.
The fix is to simply move the timer access outside
the ARB_DIS region. This is a no-op on modern hardware
because ARB_DIS is no longer used.
http://bugzilla.kernel.org/show_bug.cgi?id=13087
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Nicolas Pitre [Wed, 22 Apr 2009 19:08:17 +0000 (20:08 +0100)]
[ARM] 5460/1: Orion: reduce namespace pollution
Symbols like SOFT_RESET are way too generic to be exported at large.
To avoid this, let's move the mbus bridge register defines into a
separate file and include it where needed. This affects mach-kirkwood,
mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all
share code in plat-orion which relies on those defines.
Some other defines have been moved to narrower scopes, or simply deleted
when they had no user.
This fixes compilation problem with mpt2sas on the above listed
platforms.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dmitry Baryshkov [Mon, 20 Apr 2009 16:48:28 +0000 (17:48 +0100)]
[ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config
Check if we really have Scoop config, otherwice we can get a nice Oops
during probe.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Martin Fuzzey [Tue, 21 Apr 2009 19:48:09 +0000 (21:48 +0200)]
USB: pwc : do not pass stack allocated buffers to USB core.
This is causes problems on platforms that have alignment requirements
for DMA transfers.
Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robert Jarzmik [Wed, 22 Apr 2009 03:33:10 +0000 (20:33 -0700)]
USB: otg: Fix bug on remove path without transceiver
In the case where a gadget driver is removed while no
transceiver was found at probe time, a bug in
otg_put_transceiver() will trigger.
Provide symetric calls for otg_get_transceiver() and
otg_put_transceiver(), wherever a transceiver was found or
not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Mon, 20 Apr 2009 15:24:49 +0000 (17:24 +0200)]
USB: correct error handling in cdc-wdm
This patch to cdc-wdm
- checks for partial extra descriptors
- fixes a leak in the error case of probe
- checks for an exact number of endpoints
- adds a clarifying comment
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Mon, 20 Apr 2009 15:28:53 +0000 (17:28 +0200)]
USB: removal of tty->low_latency hack dating back to the old serial code
This removes tty->low_latency from all USB serial drivers that push
data into the tty layer at hard interrupt context. It's no longer needed
and actually harmful.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Elina Pasheva [Wed, 22 Apr 2009 00:54:42 +0000 (17:54 -0700)]
USB: serial: sierra driver bug fix for composite interface
This patch fixes a problem in sierra_send_setup() function when
composite devices are used. One should not be sending ACM commands to
interfaces that are OBEX. Doing this causes an apparent failure as the
ACM command has to time out before the interface can start being used.
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Thu, 16 Apr 2009 20:51:46 +0000 (13:51 -0700)]
USB: gadget: omap_udc uses platform_driver_probe()
We now have a more correct solution for shrinking runtime driver
footprints than just marking probe() as __init ... use it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Matthias Kaehlcke [Wed, 15 Apr 2009 20:28:36 +0000 (22:28 +0200)]
USB: ci13xxx_udc: fix build error
Fix build error in the MIPS USB IP core family device controller driver.
The driver calls udelay() without including linux/delay.h
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark A. Greer [Wed, 22 Apr 2009 03:52:54 +0000 (20:52 -0700)]
USB: musb: Prevent multiple includes of musb.h
Add #ifndef to musb header file to prevent multiple inclusions.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johannes Berg [Sat, 18 Apr 2009 09:00:39 +0000 (11:00 +0200)]
USB: pass mem_flags to dma_alloc_coherent
When I want to use my webcam, I get:
vvvvvvv
cheese: page allocation failure. order:5, mode:0x8004
Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102
Call Trace:
[<
ffffffff802c5d8e>] __alloc_pages_internal+0x3fe/0x520
[<
ffffffff80210a20>] dma_generic_alloc_coherent+0x90/0x120
[<
ffffffffa001c91e>] hcd_buffer_alloc+0xee/0x130 [usbcore]
[<
ffffffffa000d52d>] usb_buffer_alloc+0x2d/0x40 [usbcore]
[<
ffffffffa0160e14>] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo]
[<
ffffffffa0160ff6>] uvc_init_video+0x126/0x400 [uvcvideo]
[...]
Oddly, I remembered fixing this and putting in __GFP_NOWARN
because uvcvideo retries a smaller allocation. However, the
allocation function doesn't pass the gfp flags through to
dma_alloc_coherent so we still get the warning!
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 16 Apr 2009 19:37:28 +0000 (15:37 -0400)]
USB: g_file_storage: fix use-after-free bug when closing files
This patch (as1231) fixes a use-after-free bug in g_file_storage. A
device's name may not be available after the device is unregistered,
even if the device structure itself is still allocated. Since
close_backing_file() prints a LUN's name for debugging, it shouldn't
be called after the LUN has been unregistered.
That whole area needed to be cleaned up; the backing files were
getting closed in a couple of different places. The patch fixes
things so that they get closed in just one place, as part of the
unbind procedure, immediately before the LUN is unregistered.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>