wdenk [Sat, 27 Dec 2003 19:24:54 +0000 (19:24 +0000)]
* Make CPU clock on ICA-IP board controllable by a "cpuclk"
environment variable which can set to "100", "133", or "150". The
CPU clock will be configured accordingly upon next reboot. Other
values are ignored. In case of an invalid or undefined "cpuclk"
value, the compile-time default CPU clock speed will be used.
* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
window that is used to access the UART registers by the Linux driver)
* Patch by Reinhard Meyer, 20 Dec 2003:
Fix clock calculation for the MPC5200 for higher clock frequencies
(above 2**32 / 10 = 429.5 MHz).
wdenk [Sat, 20 Dec 2003 22:45:10 +0000 (22:45 +0000)]
* Fix IceCube CLKIN configuration (it's 33.000000MHz)
* Add new configuration for IceCube board with DDR memory
* Update TRAB memory configurations
wdenk [Fri, 12 Dec 2003 00:02:26 +0000 (00:02 +0000)]
Add JFFS2 support for INCA-IP board
wdenk [Tue, 9 Dec 2003 20:22:16 +0000 (20:22 +0000)]
Minor reformatting
stroese [Tue, 9 Dec 2003 15:04:55 +0000 (15:04 +0000)]
Patch by Bill Hargen, 09 Dec 2003.
stroese [Tue, 9 Dec 2003 15:04:00 +0000 (15:04 +0000)]
BUBINGA405EP added.
stroese [Tue, 9 Dec 2003 14:59:11 +0000 (14:59 +0000)]
Updated for PPC405EP boards.
stroese [Tue, 9 Dec 2003 14:58:22 +0000 (14:58 +0000)]
Fix output for "Unprotecting".
stroese [Tue, 9 Dec 2003 14:57:03 +0000 (14:57 +0000)]
Debug printf's removed.
stroese [Tue, 9 Dec 2003 14:56:24 +0000 (14:56 +0000)]
Updated for PPC405EP boards (2 banks only).
stroese [Tue, 9 Dec 2003 14:54:43 +0000 (14:54 +0000)]
BUBINGA405EP port fixed.
wdenk [Mon, 8 Dec 2003 01:34:36 +0000 (01:34 +0000)]
* Patch by Bernhard Kuhn, 28 Nov 2003:
add support for Coldfire CPU
add support for Motorola M5272C3 and M5282EVB boards
wdenk [Sun, 7 Dec 2003 23:55:12 +0000 (23:55 +0000)]
* Patch by Pierre Aubert, 24 Nov 2003:
- add a return value for the fpga command
- add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
is defined. If ide_preinit fails, ide_init is aborted.
- fix an endianess problem in fat.h
wdenk [Sun, 7 Dec 2003 22:27:15 +0000 (22:27 +0000)]
Patch by Wolter Kamphuis, 05 Dec 2003:
Add support for SNMC's QS850/QS823/QS860T boards
wdenk [Sun, 7 Dec 2003 21:39:28 +0000 (21:39 +0000)]
* Patch by Yuli Barcohen, 3 Dec 2003:
"revive" U-Boot support for old Motorola MPC860ADS board
* Patch by Cam(ilo?), 03 Dec 2003:
make examples build even with broken Montavista objcopy
* Patch by Pavel Bartusek, 27 Nov 2003:
fix conversion problem with "bootretry" evironment variable
wdenk [Sun, 7 Dec 2003 19:24:00 +0000 (19:24 +0000)]
* Patch by Andre Schwarz, 24 Nov 2003:
add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
* Patch by Pavel Bartusek, 21 Nov 2003:
set ZMII bridge speed on 440
* Patch by Anders Larsen, 17 Nov 2003:
Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
wdenk [Sun, 7 Dec 2003 18:32:37 +0000 (18:32 +0000)]
* Patches by David Müller, 14 Nov 2003:
- board/mpl/common/common_util.c
* implement support for BZIP2 compressed images
* various cleanups (printf -> puts, ...)
- board/mpl/common/flash.c
* report correct errors to upper layers
* check the erase fail and VPP low bits in status reg
- board/mpl/vcma9/cmd_vcma9.c
- board/mpl/vcma9/flash.c
* various cleanups (printf -> puts, ...)
- common/cmd_usb.c
* fix typo in comment
- cpu/arm920t/usb_ohci.c
* support for S3C2410 is missing in #if line
- drivers/cs8900.c
* reinit some registers in case of error (cable missing, ...)
- fs/fat/fat.c
* support for USB/MMC devices is missing in #if line
- include/configs/MIP405.h
- include/configs/PIP405.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
- include/configs/VCMA9.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
* enable USB support
- lib_arm/armlinux.c
* change calling convention of ARM Linux kernel as
described on http://www.arm.linux.org.uk/developer/booting.php
* Patch by Thomas Lange, 14 Nov 2003:
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
support all these AMD boards.
* Patch by Thomas Lange, 14 Nov 2003:
Workaround for mips au1x00 physical memory accesses (the au1x00
uses a 36 bit bus internally and cannot access physical memory
directly. Use the uncached SDRAM address instead of the physical
one.)
wdenk [Sun, 7 Dec 2003 00:46:27 +0000 (00:46 +0000)]
* Patch by Xue Ligong (Joe), 13 Nov 2003:
add Realtek 8019 ethernet driver
* Patch by Yuli Barcohen, 13 Nov 2003:
MPC826xADS/PQ2FADS cleanup
* Patch by Anders Larsen, 12 Nov 2003:
Update README to mark the PORTIO commands non-standard
wdenk [Sat, 6 Dec 2003 23:55:10 +0000 (23:55 +0000)]
* Patch by Nicolas Lacressonnière, 12 Nov 2003:
update for for Atmel AT91RM9200DK development kit:
- support for environment variables in DataFlash
- Atmel DataFlash AT45DB1282 support
* Patch by Jeff Carr, 11 Nov 2003:
add support for new version of 8270 processors
* Patches by George G. Davis, 05 Nov 2003:
- only pass the ARM linux initrd tag to the kernel when an initrd
is actually present
- update omap1510inn configuration file
wdenk [Sat, 6 Dec 2003 23:20:41 +0000 (23:20 +0000)]
* Patches by Stephan Linz, 3 Nov 2003:
- more endianess fixes for LAN91C111 driver
- CFG_HZ configuration patch for NIOS Cyclone board
* Patch by Stephan Linz, 28 Oct 2003:
fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
* Patch by Steven Scholz, 20 Oct 2003:
- make "mii info <addr>" show infor for PHY at "addr" only
- Endian fix for miiphy_info()
wdenk [Sat, 6 Dec 2003 19:49:23 +0000 (19:49 +0000)]
* Patch by Gleb Natapov, 19 Sep 2003:
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
* Patch by Anders Larsen, 17 Sep 2003:
Bring ARM memory layout in sync with the documentation:
stack and malloc-heap are now located _below_ the U-Boot code
wdenk [Sat, 6 Dec 2003 11:20:01 +0000 (11:20 +0000)]
Accelerate booting on TRAB board: read and check autoupdate image
headers first instead of always reading the whole images.
wdenk [Fri, 5 Dec 2003 21:08:38 +0000 (21:08 +0000)]
Fix typo in MPC5XXX code (pointed out by Victor Wren)
wdenk [Wed, 3 Dec 2003 23:53:42 +0000 (23:53 +0000)]
* Enabled password check on RMU board
* Fix configuration problem with IceCube in LOWBOOT configuration:
environment got embedded, corrupting the image layout.
wdenk [Tue, 25 Nov 2003 16:55:19 +0000 (16:55 +0000)]
Add support for BMS2003 board
(featuring a NEC NL6448BC33-54. 10.4", 640x480 TFT display).
Fix NEC display names (it's 6440 [for 640x480], not 6640).
wdenk [Mon, 17 Nov 2003 21:45:27 +0000 (21:45 +0000)]
Fix flash driver for TRAB board (must use Unlock Bypass Reset command
to exit Unlock Bypass Mode); adjust timings for flash, SRAM and CPLD
wdenk [Mon, 17 Nov 2003 21:14:37 +0000 (21:14 +0000)]
* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
recent tools
* Add checksum verification to 'imls' command
* Add bd_info fields needed for 4xx Linux I2C driver
* Patch by Martin Krause, 4 Nov. 2003:
Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
* Print used network interface when CONFIG_NET_MULTI is set
wdenk [Fri, 7 Nov 2003 13:42:26 +0000 (13:42 +0000)]
* Patch by Bernhard Kuhn, 28 Oct 2003:
Add low boot support for MPC5200
* Fix problem with dual PCMCIA support (NSCU)
* Fix MPC5200 I2C initialization function
wdenk [Thu, 30 Oct 2003 21:49:38 +0000 (21:49 +0000)]
* Fix parameter passing to standalone images with bootm command
* Patch by Kyle Harris, 30 Oct 2003:
Fix build errors for ixdp425 board
* Patch by David M. Horn, 29 Oct 2003:
Fixes to build under CYGWIN
* Get IceCube MGT5100 working (again)
wdenk [Wed, 29 Oct 2003 23:18:55 +0000 (23:18 +0000)]
* Prepare for release
* Fix problems in memory test on some boards (which was not
non-destructive as intended)
* Patch by Gary Jennejohn, 28 Oct 2003:
Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
to prevent stack overflow on ARM systems
wdenk [Tue, 28 Oct 2003 09:14:21 +0000 (09:14 +0000)]
* Patch by Stephan Linz, 28 Oct 2003:
fix init sequence error for NIOS port
* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
* Add CONFIG_VERSION_VARIABLE to TRAB configuration
wdenk [Sun, 26 Oct 2003 22:52:58 +0000 (22:52 +0000)]
* Patch by Xiao Xianghua, 23 Oct 2003:
small patch for mpc85xx
* Fix small problem in MPC5200 I2C driver
* Fix FCC3 support on ATC board
dzu [Fri, 24 Oct 2003 13:14:45 +0000 (13:14 +0000)]
* Correct header printing for multi-image files in do_bootm()
* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
wdenk [Wed, 22 Oct 2003 09:00:28 +0000 (09:00 +0000)]
Fix PCI problems on PPChameleon board
wdenk [Sun, 19 Oct 2003 23:22:11 +0000 (23:22 +0000)]
* Patch by Steven Scholz, 18 Oct 2003:
Fix AT91RM9200 ethernet driver
* Patch by Nye Liu, 17 Oct 2003:
Fix typo in include/mpc8xx.h
* Patch by Richard Woodruff, 16 Oct 03:
Fixes for cpu/arm925/interrupt.c
- Initialize timestamp & lastdec vars.
- fix timestamp overflows.
- fix lastdec overflow.
- smarter normalization to allow udelay() below 1ms to work.
* Patch by Scott McNutt, 16 Oct
add networking support for the Altera Nios Development Kit,
Cyclone Edition (DK-1C20)
* Patch by Jon Diekema, 14 Oct 2003:
add hint about doc/README.silent to README file
wdenk [Sun, 19 Oct 2003 22:30:08 +0000 (22:30 +0000)]
* Fix PCI problems on PPChameleonEVB
* TRAB auto-update: image type patch by Martin Krause, 17 Oct 2003
dzu [Sun, 19 Oct 2003 21:43:26 +0000 (21:43 +0000)]
Add CompactFlash support for NSCU
wdenk [Thu, 16 Oct 2003 12:53:35 +0000 (12:53 +0000)]
TRAB auto-update: Base decision if we have to strip the image
header on image type as encoded in the header
wdenk [Wed, 15 Oct 2003 23:53:47 +0000 (23:53 +0000)]
* Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx)
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
* Minor code cleanup
wdenk [Tue, 14 Oct 2003 19:43:55 +0000 (19:43 +0000)]
* Make sure HUSH is initialized for running auto-update scripts
* Make 5200 reset command _really_ reset the board, without running
any other code after it
* Fix flash mapping and display on P3G4 board
* Patch by Kyle Harris, 15 Jul 2003:
- add support for Intel IXP425 CPU
- add support for IXDP425 eval board
wdenk [Fri, 10 Oct 2003 10:05:42 +0000 (10:05 +0000)]
Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
for more information
wdenk [Thu, 9 Oct 2003 20:09:04 +0000 (20:09 +0000)]
* Patch by Steven Scholz, 10 Oct 2003
- Add support for Altera FPGA ACEX1K
* Patches by Thomas Lange, 09 Oct 2003:
- Endian swap ATA identity for all big endian CPUs, not just PPC
- MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
args to linux
- add support for dbau1x00 board (MIPS32)
wdenk [Thu, 9 Oct 2003 19:00:25 +0000 (19:00 +0000)]
* Patches by Thomas Lange, 09 Oct 2003:
- fix cmd_ide.c for non ppc boards (read/write functions did not
add ATA base address)
- fix for shannon board
- #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
* Patch by Sangmoon Kim, 07 Oct 2003:
add support for debris board
wdenk [Thu, 9 Oct 2003 13:16:55 +0000 (13:16 +0000)]
* Patch by Martin Krause, 09 Oct 2003:
Fixes for TRAB board
- /board/trab/rs485.c: correct baudrate
- /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
udelay(); fix some timing problems with adc controller
- /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
modify commands: touch and buzzer
* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
(quick & dirty workaround for rogue pointer problem in get_vfatname());
Use direct function calls for auto_update instead of hush commands
wdenk [Wed, 8 Oct 2003 23:26:14 +0000 (23:26 +0000)]
* Patch by Scott McNutt, 04 Oct 2003:
- add support for Altera Nios-32 CPU
- add support for Nios Cyclone Development Kit (DK-1C20)
* Patch by Steven Scholz, 29 Sep 2003:
- A second parameter for bootm overwrites the load address for
"Standalone Application" images.
- bootm sets environment variable "filesize" to the resulting
(uncompressed) data length for "Standalone Application" images
when autostart is set to "no". Now you can do something like
if bootm $fpgadata $some_free_ram ; then
fpga load 0 $some_free_ram $filesize
fi
* Patch by Denis Peter, 25 Sept 2003:
add support for the MIP405 Rev. C board
wdenk [Wed, 8 Oct 2003 22:45:44 +0000 (22:45 +0000)]
* Patch by Yuli Barcohen, 25 Sep 2003:
add support for Zephyr Engineering ZPC.1900 board
* Patch by Anders Larsen, 23 Sep 2003:
add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
implemented for the x86 architecture)
wdenk [Wed, 8 Oct 2003 22:33:00 +0000 (22:33 +0000)]
* Patch by Sangmoon Kim, 23 Sep 2003:
fix pll_pci_to_mem_multiplier table for MPC8245
* Patch by Anders Larsen, 22 Sep 2003:
enable timed autoboot on PXA
* Patch by David Müller, 22 Sep 2003:
- add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
returns correct libgcc file path
- "latency" reduction of busy-loop waiting to improve "U-Boot" boot
time on s3c24x0 systems
* Patch by Jon Diekema, 19 Sep 2003:
- Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
link state to the fault LED.
- In NetLoop, make the Fault LED reflect the link status. The link
status gets updated on entry, and on timeouts.
wdenk [Wed, 8 Oct 2003 22:14:02 +0000 (22:14 +0000)]
* Patch by Anders Larsen, 18 Sep 2003:
allow mkimage to build and run on Cygwin-hosted systems
* Patch by Frank Müller, 18 Sep 2003:
use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
cpu/mpc8xx/fec.c
* Patch by Pantelis Antoniou, 16 Sep 2003:
add tool to compute fileds in the PLPRCR register for MPC86x
wdenk [Tue, 7 Oct 2003 20:01:55 +0000 (20:01 +0000)]
Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
wdenk [Tue, 7 Oct 2003 10:33:38 +0000 (10:33 +0000)]
Fix build problems under FreeBSD
wdenk [Mon, 6 Oct 2003 22:00:45 +0000 (22:00 +0000)]
Add generic filesystem image type
wdenk [Mon, 6 Oct 2003 21:55:32 +0000 (21:55 +0000)]
* Update TRAB auto update code
* Make fatload set filesize environment variable
fix potential buffer overlow problem
* enable basic / medium / high-end configurations for PPChameleonEVB
board; fix NAND code
* enable TFTP client code to specify to the server the desired
timeout value (see RFC-2349)
dzu [Tue, 30 Sep 2003 15:22:12 +0000 (15:22 +0000)]
Improve SDRAM setup for TRAB board
dzu [Tue, 30 Sep 2003 15:11:43 +0000 (15:11 +0000)]
Suppress all output with splashscreen configured only if "splashimage"
is set
dzu [Tue, 30 Sep 2003 14:36:51 +0000 (14:36 +0000)]
* Fix problems with I2C support for mpc5200
dzu [Tue, 30 Sep 2003 14:08:43 +0000 (14:08 +0000)]
Fix problems with I2C support for mpc5200
dzu [Mon, 29 Sep 2003 21:55:54 +0000 (21:55 +0000)]
Suppress all output with splashscreen configured only if "splashimage"
is set
dzu [Mon, 29 Sep 2003 21:55:54 +0000 (21:55 +0000)]
* Adapt TRAB configuration and auto_update to new memory layout
dzu [Thu, 25 Sep 2003 22:32:40 +0000 (22:32 +0000)]
Add configuration for wtk board
dzu [Thu, 25 Sep 2003 22:30:12 +0000 (22:30 +0000)]
Add support for the Sharp LQ065T9DR51U LCD display
wdenk [Fri, 19 Sep 2003 08:29:25 +0000 (08:29 +0000)]
"start" may be legitimately 0x0000
wdenk [Thu, 18 Sep 2003 20:10:12 +0000 (20:10 +0000)]
Update MPC5200 port pin configuration for Linux CAN drivers.
wdenk [Thu, 18 Sep 2003 18:55:25 +0000 (18:55 +0000)]
Work on TRAB's auto_update feature.
Cleanup for submitted patches.
wdenk [Thu, 18 Sep 2003 10:45:21 +0000 (10:45 +0000)]
* Patch by Rune Torgersen, 17 Sep 2003:
- Fixes for MPC8266 default config
- Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk [Thu, 18 Sep 2003 10:02:25 +0000 (10:02 +0000)]
* Patches by Jon Diekema, 17 Sep 2003:
- update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
env_common.c)
- sbc8260 tweaks
- adjust "help" output
wdenk [Thu, 18 Sep 2003 09:21:33 +0000 (09:21 +0000)]
* Patches by Anders Larsen, 17 Sep 2003:
- fix spelling errors
- set GD_FLG_DEVINIT flag only after device function pointers
are valid
- Allow CFG_ALT_MEMTEST on systems where address zero isn't
writeable
- enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
- trigger watchdog while waiting in serial driver
wdenk [Wed, 17 Sep 2003 22:48:07 +0000 (22:48 +0000)]
Support new configuration of TRAB board with more memory
Minor cleanup of comments
wdenk [Wed, 17 Sep 2003 15:10:32 +0000 (15:10 +0000)]
Add auto-update code for TRAB board using USB memory sticks
wdenk [Tue, 16 Sep 2003 21:07:28 +0000 (21:07 +0000)]
Code cleanup
wdenk [Tue, 16 Sep 2003 17:35:37 +0000 (17:35 +0000)]
* Disable MPC5200 bus pipelining as workaround for bus contention
wdenk [Tue, 16 Sep 2003 17:29:31 +0000 (17:29 +0000)]
* Fix timeout problems with 1st packet on MPC5200
wdenk [Tue, 16 Sep 2003 17:20:34 +0000 (17:20 +0000)]
Disable MPC5200 bus pipelining as workaround for bus contention
wdenk [Tue, 16 Sep 2003 17:06:05 +0000 (17:06 +0000)]
* Modify XLB arbiter priorities on MPC5200 so all devices use same
priority; configure critical interrupts to be handled like external
interrupts
wdenk [Tue, 16 Sep 2003 11:39:10 +0000 (11:39 +0000)]
Make IPB clock on MGT5100/MPC5200 configurable in board config file;
go back to 66 MHz for stability
wdenk [Mon, 15 Sep 2003 21:14:37 +0000 (21:14 +0000)]
Cleanup of code, output formatting, and indentation.
wdenk [Mon, 15 Sep 2003 18:00:00 +0000 (18:00 +0000)]
* Patches by Jon Diekema, 15 Sep 2003:
- add description for missing CFG_CMD_* entries in the README file
- sacsng tweaks:
include/configs/sacsng.h:
+ Support extra bootp options like: 2nd DNS and send hostname
+ Enabling ping and irq command
+ Adding defines for a bunch of misc configrabled options
(patches for these options will be coming)
+ Adding watchdog support, but it isn't enabled yet.
board/sacsng/sacsng.c:
+ Suppressing unneeded output when the quiet environment
is non-zero.
+ show_boot_progress() now accepts any negative number as a
failure code.
+ show_boot_progress() flashes the error code 5 times, and
then resets the board to retry the boot from the top
* Patch by Gleb Natapov, 14 Sep 2003:
enable watchdog support for all MPC824x boards that have a watchdog
wdenk [Sun, 14 Sep 2003 19:08:39 +0000 (19:08 +0000)]
* Patch by Gleb Natapov, 14 Sep 2003:
enable watchdog support for all MPC824x boards that have a watchdog
* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
"Non-octet Aligned Frame" errors we see at 100 Mbps
* Patch by Sharad Gupta, 14 Sep 2003:
fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
wdenk [Sat, 13 Sep 2003 19:13:29 +0000 (19:13 +0000)]
* Patch by llandre, 11 Sep 2003:
update configuration for PPChameleonEVB board
wdenk [Sat, 13 Sep 2003 19:01:12 +0000 (19:01 +0000)]
* Patch by David Müller, 13 Sep 2003:
various changes to VCMA9 board specific files
* Add I2C support for MGT5100 / MPC5200
wdenk [Fri, 12 Sep 2003 20:09:09 +0000 (20:09 +0000)]
* Patch by Rune Torgersen, 11 Sep 2003:
Changed default memory option on MPC8266ADS to NOT be Page Based
Interleave, since this doesn't work very well with the standard
16MB DIMM
* Patch by George G. Davis, 12 Sep 2003:
fix Makefile settings for sk98 driver
wdenk [Fri, 12 Sep 2003 15:35:15 +0000 (15:35 +0000)]
Move TRAB burn-in tests to TRAB board directory
stroese [Fri, 12 Sep 2003 08:57:52 +0000 (08:57 +0000)]
Patch by Stefan Roese, 12 Sep 2003
stroese [Fri, 12 Sep 2003 08:57:15 +0000 (08:57 +0000)]
New boards DP405, HUB405, PLU405, VOH405 added.
stroese [Fri, 12 Sep 2003 08:55:18 +0000 (08:55 +0000)]
New board config file added.
stroese [Fri, 12 Sep 2003 08:53:54 +0000 (08:53 +0000)]
Update configuration.
stroese [Fri, 12 Sep 2003 08:52:09 +0000 (08:52 +0000)]
PPC405EP: set vendor id.
stroese [Fri, 12 Sep 2003 08:49:58 +0000 (08:49 +0000)]
Disable memory controller before setting first values.
stroese [Fri, 12 Sep 2003 08:46:58 +0000 (08:46 +0000)]
PMC405 update.
stroese [Fri, 12 Sep 2003 08:46:10 +0000 (08:46 +0000)]
PCI405 update.
stroese [Fri, 12 Sep 2003 08:44:46 +0000 (08:44 +0000)]
CPCI405(AB) update.
stroese [Fri, 12 Sep 2003 08:43:46 +0000 (08:43 +0000)]
ASH405 update.
stroese [Fri, 12 Sep 2003 08:42:58 +0000 (08:42 +0000)]
Xilinx jtag tool added.
stroese [Fri, 12 Sep 2003 08:42:13 +0000 (08:42 +0000)]
Board VOH405 added.
stroese [Fri, 12 Sep 2003 08:41:56 +0000 (08:41 +0000)]
Board PLU405 added.
stroese [Fri, 12 Sep 2003 08:41:39 +0000 (08:41 +0000)]
Board HUB405 added.
stroese [Fri, 12 Sep 2003 08:41:24 +0000 (08:41 +0000)]
Board DP405 added.
wdenk [Thu, 11 Sep 2003 23:06:34 +0000 (23:06 +0000)]
* Patch by Martin Krause, 11 Sep 2003:
add burn-in tests for TRAB board
* Enable instruction cache on MPC5200 board
wdenk [Thu, 11 Sep 2003 19:48:06 +0000 (19:48 +0000)]
* Patch by Gary Jennejohn, 11 Sep 2003:
- allow for longer timeouts for USB mass storage devices
* Patch by Denis Peter, 11 Sep 2003:
- fix USB data pointer assignment for bulk only transfer.
- prevent to display erased directories in FAT filesystem.
* Change output format for NAND flash - make it look like for other
memory, too
wdenk [Wed, 10 Sep 2003 22:30:53 +0000 (22:30 +0000)]
* Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB
* Patches by Gleb Natapov, 2 Sep 2003:
- cleanup of POST code for unsupported architectures
- MPC824x locks way0 of data cache for use as initial RAM;
this patch unlocks it after relocation to RAM and invalidates
the locked entries.
* Patch by Gleb Natapov, 30 Aug 2003:
new I2C driver for mpc107 bridge. Now works from flash.
* Patch by Dave Ellis, 11 Aug 2003:
- JFFS2: fix typo in common/cmd_jffs2.c
- JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
- JFFS2: remove node version 0 warning
- JFFS2: accept JFFS2 PADDING nodes
- SXNI855T: add AM29LV800 support
- SXNI855T: move environment from EEPROM to flash
- SXNI855T: boot from JFFS2 in NOR or NAND flash
* Patch by Bill Hargen, 11 Aug 2003:
fixes for I2C on MPC8240
- fix i2c_write routine
- fix iprobe command
- eliminates use of global variables, plus dead code, cleanup.
wdenk [Wed, 10 Sep 2003 18:20:28 +0000 (18:20 +0000)]
* Add support for USB Mass Storage Devices (BBB)
(tested with USB memory sticks only)
* Avoid flicker on TRAB's VFD
projects / platform / kernel / u-boot.git / log