Daniel Golle [Tue, 9 May 2023 01:20:06 +0000 (03:20 +0200)]
net: ethernet: mtk_eth_soc: fix NULL pointer dereference
Check for NULL pointer to avoid kernel crashing in case of missing WO
firmware in case only a single WEDv2 device has been initialized, e.g. on
MT7981 which can connect just one wireless frontend.
Fixes:
86ce0d09e424 ("net: ethernet: mtk_eth_soc: use WO firmware for MT7981")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 8 May 2023 23:17:49 +0000 (16:17 -0700)]
net: phy: bcm7xx: Correct read from expansion register
Since the driver works in the "legacy" addressing mode, we need to write
to the expansion register (0x17) with bits 11:8 set to 0xf to properly
select the expansion register passed as argument.
Fixes:
f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 8 May 2023 17:55:43 +0000 (10:55 -0700)]
net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
KCSAN found a data race in sock_recv_cmsgs() where the read access
to sk->sk_stamp needs READ_ONCE().
BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg
write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0:
sock_write_timestamp include/net/sock.h:2670 [inline]
sock_recv_cmsgs include/net/sock.h:2722 [inline]
packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1:
sock_recv_cmsgs include/net/sock.h:2721 [inline]
packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0xffffffffc4653600 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes:
6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230508175543.55756-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Vasut [Sat, 6 May 2023 23:58:45 +0000 (01:58 +0200)]
net: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register
Initialize MAC_ONEUS_TIC_COUNTER register with correct value derived
from CSR clock, otherwise EEE is unstable on at least NXP i.MX8M Plus
and Micrel KSZ9131RNX PHY, to the point where not even ARP request can
be sent out.
i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
11.7.6.1.34 One-microsecond Reference Timer (MAC_ONEUS_TIC_COUNTER)
defines this register as:
"
This register controls the generation of the Reference time (1 microsecond
tic) for all the LPI timers. This timer has to be programmed by the software
initially.
...
The application must program this counter so that the number of clock cycles
of CSR clock is 1us. (Subtract 1 from the value before programming).
For example if the CSR clock is 100MHz then this field needs to be programmed
to value 100 - 1 = 99 (which is 0x63).
This is required to generate the 1US events that are used to update some of
the EEE related counters.
"
The reset value is 0x63 on i.MX8M Plus, which means expected CSR clock are
100 MHz. However, the i.MX8M Plus "enet_qos_root_clk" are 266 MHz instead,
which means the LPI timers reach their count much sooner on this platform.
This is visible using a scope by monitoring e.g. exit from LPI mode on TX_CTL
line from MAC to PHY. This should take 30us per STMMAC_DEFAULT_TWT_LS setting,
during which the TX_CTL line transitions from tristate to low, and 30 us later
from low to high. On i.MX8M Plus, this transition takes 11 us, which matches
the 30us * 100/266 formula for misconfigured MAC_ONEUS_TIC_COUNTER register.
Configure MAC_ONEUS_TIC_COUNTER based on CSR clock, so that the LPI timers
have correct 1us reference. This then fixes EEE on i.MX8M Plus with Micrel
KSZ9131RNX PHY.
Fixes:
477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Harald Seiler <hws@denx.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin iMX8MP
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20230506235845.246105-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roy Novich [Sun, 7 May 2023 13:57:43 +0000 (16:57 +0300)]
linux/dim: Do nothing if no time delta between samples
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes:
4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes:
cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Christophe JAILLET [Fri, 5 May 2023 18:39:33 +0000 (20:39 +0200)]
net: mdio: mvusb: Fix an error handling path in mvusb_mdio_probe()
Should of_mdiobus_register() fail, a previous usb_get_dev() call should be
undone as in the .disconnect function.
Fixes:
04e37d92fbed ("net: phy: add marvell usb to mdio controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 5 May 2023 17:06:18 +0000 (17:06 +0000)]
net: skb_partial_csum_set() fix against transport header magic value
skb->transport_header uses the special 0xFFFF value
to mark if the transport header was set or not.
We must prevent callers to accidentaly set skb->transport_header
to 0xFFFF. Note that only fuzzers can possibly do this today.
syzbot reported:
WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 skb_transport_offset include/linux/skbuff.h:2956 [inline]
WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103
Modules linked in:
CPU: 0 PID: 2340 Comm: syz-executor.0 Not tainted 6.3.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:skb_transport_header include/linux/skbuff.h:2847 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:2956 [inline]
RIP: 0010:virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103
Code: 41 39 df 0f 82 c3 04 00 00 48 8b 7c 24 10 44 89 e6 e8 08 6e 59 ff 48 85 c0 74 54 e8 ce 36 7e fc e9 37 f8 ff ff e8 c4 36 7e fc <0f> 0b e9 93 f8 ff ff 44 89 f7 44 89 e6 e8 32 38 7e fc 45 39 e6 0f
RSP: 0018:
ffffc90004497880 EFLAGS:
00010293
RAX:
ffffffff84fea55c RBX:
000000000000ffff RCX:
ffff888120be2100
RDX:
0000000000000000 RSI:
000000000000ffff RDI:
000000000000ffff
RBP:
ffffc90004497990 R08:
ffffffff84fe9de5 R09:
0000000000000034
R10:
ffffea00048ebd80 R11:
0000000000000034 R12:
ffff88811dc2d9c8
R13:
dffffc0000000000 R14:
ffff88811dc2d9ae R15:
1ffff11023b85b35
FS:
00007f9211a59700(0000) GS:
ffff8881f6c00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000200002c0 CR3:
00000001215a5000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
packet_snd net/packet/af_packet.c:3076 [inline]
packet_sendmsg+0x4590/0x61a0 net/packet/af_packet.c:3115
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
__sys_sendto+0x472/0x630 net/socket.c:2144
__do_sys_sendto net/socket.c:2156 [inline]
__se_sys_sendto net/socket.c:2152 [inline]
__x64_sys_sendto+0xe5/0x100 net/socket.c:2152
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f9210c8c169
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f9211a59168 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00007f9210dabf80 RCX:
00007f9210c8c169
RDX:
000000000000ffed RSI:
00000000200000c0 RDI:
0000000000000003
RBP:
00007f9210ce7ca1 R08:
0000000020000540 R09:
0000000000000014
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
00007ffe135d65cf R14:
00007f9211a59300 R15:
0000000000022000
Fixes:
66e4c8d95008 ("net: warn if transport header was not set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 6 May 2023 02:12:01 +0000 (19:12 -0700)]
Merge tag 'net-6.4-rc1' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- sched: act_pedit: free pedit keys on bail from offset check
Current release - new code bugs:
- pds_core:
- Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
- fix mutex double unlock in error path
Previous releases - regressions:
- sched: cls_api: remove block_cb from driver_list before freeing
- nf_tables: fix ct untracked match breakage
- eth: mtk_eth_soc: drop generic vlan rx offload
- sched: flower: fix error handler on replace
Previous releases - always broken:
- tcp: fix skb_copy_ubufs() vs BIG TCP
- ipv6: fix skb hash for some RST packets
- af_packet: don't send zero-byte data in packet_sendmsg_spkt()
- rxrpc: timeout handling fixes after moving client call connection
to the I/O thread
- ixgbe: fix panic during XDP_TX with > 64 CPUs
- igc: RMW the SRRCTL register to prevent losing timestamp config
- dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621
- r8152:
- fix flow control issue of RTL8156A
- fix the poor throughput for 2.5G devices
- move setting r8153b_rx_agg_chg_indicate() to fix coalescing
- enable autosuspend
- ncsi: clear Tx enable mode when handling a Config required AEN
- octeontx2-pf: macsec: fixes for CN10KB ASIC rev
Misc:
- 9p: remove INET dependency"
* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
pds_core: fix mutex double unlock in error path
net/sched: flower: fix error handler on replace
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
net/sched: flower: fix filter idr initialization
net: fec: correct the counting of XDP sent frames
bonding: add xdp_features support
net: enetc: check the index of the SFI rather than the handle
sfc: Add back mailing list
virtio_net: suppress cpu stall when free_unused_bufs
ice: block LAN in case of VF to VF offload
net: dsa: mt7530: fix network connectivity with multiple CPU ports
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
9p: Remove INET dependency
netfilter: nf_tables: fix ct untracked match breakage
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
igc: read before write to SRRCTL register
pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
pds_core: remove CONFIG_DEBUG_FS from makefile
ionic: catch failure from devlink_alloc
...
Linus Torvalds [Sat, 6 May 2023 02:07:17 +0000 (19:07 -0700)]
Merge tag 'i2c-for-6.4-rc1-part2' of git://git./linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Some more driver bugfixes and a DT binding conversion"
* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: brcm,kona-i2c: convert to YAML
i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
i2c: omap: Fix standard mode false ACK readings
i2c: tegra: Fix PEC support for SMBUS block read
Lukas Bulwahn [Fri, 5 May 2023 22:39:09 +0000 (00:39 +0200)]
s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDS
Commit
0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.
As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.
Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Fri, 5 May 2023 20:35:45 +0000 (13:35 -0700)]
Merge git://git./linux/kernel/git/netdev/net-next
There's a fix which landed in net-next, pull it in along
with the couple of minor cleanups.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 5 May 2023 20:27:59 +0000 (13:27 -0700)]
Merge tag 'devicetree-fixes-for-6.4-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: add Conor as a dt-bindings maintainer
dt-bindings: perf: riscv,pmu: fix property dependencies
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
of: fdt: Scan /memreserve/ last
dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
Linus Torvalds [Fri, 5 May 2023 20:16:42 +0000 (13:16 -0700)]
Merge tag 'docs-6.4-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving documentation fixes, plus one Spanish
translation that has been ready for some time but got applied late"
* tag 'docs-6.4-2' of git://git.lwn.net/linux:
docs/sp_SP: Add translation of process/adding-syscalls
CREDITS: Update email address for Mat Martineau
Documentation: update kernel stack for x86_64
docs: Remove unnecessary unicode character
docs: fix "Reviewd" typo
Documentation: timers: hrtimers: Make hybrid union historical
docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
doc:it_IT: fix some typos
Linus Torvalds [Fri, 5 May 2023 20:11:02 +0000 (13:11 -0700)]
Merge tag 'trace-v6.4-rc1' of git://git./linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Make buffer_percent read/write.
The buffer_percent file is how users can state how long to block on
the tracing buffer depending on how much is in the buffer. When it
hits the "buffer_percent" it will wake the task waiting on the
buffer. For some reason it was set to read-only.
This was not noticed because testing was done as root without
SELinux, but with SELinux it will prevent even root to write to it
without having CAP_DAC_OVERRIDE.
- The "touched_functions" was added this merge window, but one of the
reasons for adding it was not implemented.
That was to show what functions were not only touched, but had either
a direct trampoline attached to it, or a kprobe or live kernel
patching that can "hijack" the function to run a different function.
The point is to know if there's functions in the kernel that may not
be behaving as the kernel code shows. This can be used for debugging.
TODO: Add this information to kernel oops too.
* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
tracing: Fix permissions for the buffer_percent file
Linus Torvalds [Fri, 5 May 2023 19:56:55 +0000 (12:56 -0700)]
Merge tag 'locking-core-2023-05-05' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
Linus Torvalds [Fri, 5 May 2023 19:29:57 +0000 (12:29 -0700)]
Merge branch 'x86-uaccess-cleanup': x86 uaccess header cleanups
Merge my x86 uaccess updates branch.
The LAM ("Linear Address Masking") updates in this release made me
unhappy about how "access_ok()" was done, and it actually turned out to
have a couple of small bugs in it too. This is my cleanup of the code:
- use the sign bit of the __user pointer rather than masking the
address and checking it against the TASK_SIZE range.
We already did this part for the get/put_user() side, but
'access_ok()' did the naïve "mask and range check" thing, which not
only generates nasty code, but also ended up meaning that __access_ok
itself didn't do a good job, and so copy_from_user_nmi() didn't get
the check right.
- move all the code that is 64-bit only into the 64-bit version of the
header file, so that we don't unnecessarily pollute the shared x86
code and make it look like LAM might work in 32-bit too.
- fix a bug in the address masking (that doesn't end up mattering: in
this case the fix was to just remove the buggy code entirely).
- a couple of trivial cleanups and added commentary about the
access_ok() rules.
* x86-uaccess-cleanup:
x86-64: mm: clarify the 'positive addresses' user address rules
x86: mm: remove 'sign' games from LAM untagged_addr*() macros
x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
x86: mm: remove architecture-specific 'access_ok()' define
x86-64: make access_ok() independent of LAM
Linus Torvalds [Fri, 5 May 2023 19:23:33 +0000 (12:23 -0700)]
Merge tag 'riscv-for-linus-6.4-mw2' of git://git./linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for hibernation
- The .rela.dyn section has been moved to the init area
- A fix for the SBI probing to allow for implementation-defined
behavior
- Various other fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: include cpufeature.h in cpufeature.c
riscv: Move .rela.dyn to the init sections
dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
riscv: compat_syscall_table: Fixup compile warning
RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
RISC-V: fix sifive and thead section mismatches in errata
RISC-V: Align SBI probe implementation with spec
riscv: mm: remove redundant parameter of create_fdt_early_page_table
riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Linus Torvalds [Fri, 5 May 2023 19:17:01 +0000 (12:17 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"This includes the 6.4 changes for RISC-V, and a few bugfix patches for
other architectures. For x86, this closes a longstanding performance
issue in the newer and (usually) more scalable page table management
code.
RISC-V:
- ONE_REG interface to enable/disable SBI extensions
- Zbb extension for Guest/VM
- AIA CSR virtualization
x86:
- Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU
can result in the root being freed even though the root is
completely valid and can be reused as-is (with a TLB flush).
s390:
- A couple of bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix race in gmap_make_secure()
KVM: s390: pv: fix asynchronous teardown for small VMs
KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated
RISC-V: KVM: Virtualize per-HART AIA CSRs
RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask
RISC-V: KVM: Add ONE_REG interface for AIA CSRs
RISC-V: KVM: Implement subtype for CSR ONE_REG interface
RISC-V: KVM: Initial skeletal support for AIA
RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines
RISC-V: Detect AIA CSRs from ISA string
RISC-V: Add AIA related CSR defines
RISC-V: KVM: Allow Zbb extension for Guest/VM
RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions
RISC-V: KVM: Alphabetize selects
KVM: RISC-V: Retry fault if vma_lookup() results become invalid
Linus Torvalds [Fri, 5 May 2023 19:10:09 +0000 (12:10 -0700)]
Merge tag 'acpi-6.4-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during
the 6.3 cycle, that turned out to do more harm than help (Hans de
Goede)"
* tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
Linus Torvalds [Fri, 5 May 2023 19:05:00 +0000 (12:05 -0700)]
Merge tag 'thermal-6.4-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in the Intel powerclamp driver
introduced during the 6.3 cycle and update MAINTAINERS to match recent
code changes.
Specifics:
- Fix NULL pointer access in the Intel powerclamp thermal driver that
occurs on attempts to set the cooling device state to 0 in the
default configuration (Srinivas Pandruvada)
- Drop the stale MAINTAINERS entry for the Intel Menlow thermal
driver that has been removed recently (Lukas Bulwahn)"
* tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER
thermal: intel: powerclamp: Fix NULL pointer access issue
Linus Torvalds [Fri, 5 May 2023 18:57:29 +0000 (11:57 -0700)]
Merge tag 'phy-fixes-6.4-1' of git://git./linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Fix for mediatek driver warning for variable used uninitialized and
for wrong pll math
* tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: mediatek: hdmi: mt8195: fix wrong pll calculus
phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
Linus Torvalds [Fri, 5 May 2023 18:49:22 +0000 (11:49 -0700)]
Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This is the fixes for the last couple of weeks for i915 and last 3
weeks for amdgpu, lots of them but pretty scattered around and all
pretty small.
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
i915:
- skl pipe source size check
- mtl transcoder mask fix
- DSI power on sequence fix
- GuC versioning corner case fix"
* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
drm/amd/display: filter out invalid bits in pipe_fuses
drm/amd/display: Change default Z8 watermark values
drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
drm/amdgpu: add a missing lock for AMDGPU_SCHED
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
drm/amdgpu: Enable doorbell selfring after resize FB BAR
drm/amdgpu: Use the default reset when loading or reloading the driver
drm/amdgpu: Fix mode2 reset for sienna cichlid
drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
drm/i915/guc: Actually return an error if GuC version range check fails
drm/amd/display: Lowering min Z8 residency time
drm/amd/display: fix flickering caused by S/G mode
drm/amd/display: Set min_width and min_height capability for DCN30
drm/amd/display: Isolate remaining FPU code in DCN32
drm/amd/display: Update bounding box values for DCN321
drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
...
Steven Rostedt (Google) [Wed, 3 May 2023 01:32:33 +0000 (21:32 -0400)]
ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
If a function had ever had IPMODIFY or DIRECT attached to it, where this
is how live kernel patching and BPF overrides work, mark them and display
an "M" in the enabled_functions and touched_functions files. This can be
used for debugging. If a function had been modified and later there's a bug
in the code related to that function, this can be used to know if the cause
is possibly from a live kernel patch or a BPF program that changed the
behavior of the code.
Also update the documentation on the enabled_functions and
touched_functions output, as it was missing direct callers and CALL_OPS.
And include this new modify attribute.
Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Lukas Bulwahn [Fri, 5 May 2023 04:36:05 +0000 (06:36 +0200)]
MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER
Commit
2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver")
removes the driver drivers/thermal/intel/intel_menlow.c, but misses to
remove its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS.
Fixes:
2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Conor Dooley [Thu, 4 May 2023 21:58:39 +0000 (22:58 +0100)]
MAINTAINERS: add Conor as a dt-bindings maintainer
Rob asked if I would be interested in helping with the dt-bindings
maintenance, and since I am a glutton for punishment I accepted.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230504-renderer-alive-1c01d431b2a7@spud
Signed-off-by: Rob Herring <robh@kernel.org>
Paolo Bonzini [Fri, 5 May 2023 10:15:09 +0000 (06:15 -0400)]
Merge tag 'kvm-s390-next-6.4-2' of https://git./linux/kernel/git/kvms390/linux into HEAD
For 6.4
Paolo Bonzini [Fri, 5 May 2023 10:12:36 +0000 (06:12 -0400)]
Merge tag 'kvm-x86-mmu-6.4-2' of https://github.com/kvm-x86/linux into HEAD
Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can
result in the root being freed even though the root is completely valid and
can be reused as-is (with a TLB flush).
Paolo Bonzini [Fri, 5 May 2023 10:11:48 +0000 (06:11 -0400)]
Merge tag 'kvm-riscv-6.4-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.4
- ONE_REG interface to enable/disable SBI extensions
- Zbb extension for Guest/VM
- AIA CSR virtualization
Florian Fainelli [Thu, 4 May 2023 23:07:27 +0000 (16:07 -0700)]
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.
Fixes:
c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 4 May 2023 20:44:59 +0000 (13:44 -0700)]
pds_core: fix mutex double unlock in error path
Fix a double unlock in an error handling path by unlocking as soon as
the error is seen and removing unlocks in the error cleanup path.
Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/
Fixes:
523847df1b37 ("pds_core: add devcmd device interfaces")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 5 May 2023 09:01:31 +0000 (10:01 +0100)]
Merge branch 'tc-action-fixes'
Vlad Buslov says:
====================
Fixes for miss to tc action series
Changes V1 -> V2:
- Added new patch reverting Ivan's fix for the same issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Thu, 4 May 2023 18:16:16 +0000 (20:16 +0200)]
net/sched: flower: fix error handler on replace
When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of
new filter to idr is postponed until later in code since handle is already
provided by the user. However, the error handling code in fl_change()
always assumes that the new filter had been inserted into idr. If error
handler is reached when replacing existing filter it may remove it from idr
therefore making it unreachable for delete or dump afterwards. Fix the
issue by verifying that 'fold' argument wasn't provided by caller before
calling idr_remove().
Fixes:
08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Thu, 4 May 2023 18:16:15 +0000 (20:16 +0200)]
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
This reverts commit
32eff6bacec2cb574677c15378169a9fa30043ef.
Superseded by the following commit in this series.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Thu, 4 May 2023 18:16:14 +0000 (20:16 +0200)]
net/sched: flower: fix filter idr initialization
The cited commit moved idr initialization too early in fl_change() which
allows concurrent users to access the filter that is still being
initialized and is in inconsistent state, which, in turn, can cause NULL
pointer dereference [0]. Since there is no obvious way to fix the ordering
without reverting the whole cited commit, alternative approach taken to
first insert NULL pointer into idr in order to allocate the handle but
still cause fl_get() to return NULL and prevent concurrent users from
seeing the filter while providing miss-to-action infrastructure with valid
handle id early in fl_change().
[ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN
[ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5
[ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower]
[ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57
[ 152.442885] RSP: 0018:
ffff88817a28f158 EFLAGS:
00010246
[ 152.443851] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
[ 152.444826] RDX:
dffffc0000000000 RSI:
ffffffff8500ae80 RDI:
ffff88810a987900
[ 152.445791] RBP:
ffff888179d88240 R08:
ffff888179d8845c R09:
ffff888179d88240
[ 152.446780] R10:
ffffed102f451e48 R11:
00000000fffffff2 R12:
ffff88810a987900
[ 152.447741] R13:
ffffffff8500ae80 R14:
ffff88810a987900 R15:
ffff888149b3c738
[ 152.448756] FS:
00007f5eb2a34800(0000) GS:
ffff88881ec00000(0000) knlGS:
0000000000000000
[ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 152.450685] CR2:
000000000046ad19 CR3:
000000010b0bd006 CR4:
0000000000370ea0
[ 152.451641] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 152.452628] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 152.453588] Call Trace:
[ 152.454032] <TASK>
[ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0
[ 152.455109] ? sock_sendmsg+0xc5/0x190
[ 152.455689] ? ____sys_sendmsg+0x535/0x6b0
[ 152.456320] ? ___sys_sendmsg+0xeb/0x170
[ 152.456916] ? do_syscall_64+0x3d/0x90
[ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.458321] ? ___sys_sendmsg+0xeb/0x170
[ 152.458958] ? __sys_sendmsg+0xb5/0x140
[ 152.459564] ? do_syscall_64+0x3d/0x90
[ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower]
[ 152.461710] ? _raw_spin_lock+0x7a/0xd0
[ 152.462299] ? _raw_read_lock_irq+0x30/0x30
[ 152.462924] ? nla_put+0x15e/0x1c0
[ 152.463480] fl_dump+0x228/0x650 [cls_flower]
[ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower]
[ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330
[ 152.465592] ? nla_put+0x15e/0x1c0
[ 152.466160] tcf_fill_node+0x515/0x9a0
[ 152.466766] ? tc_setup_offload_action+0xf0/0xf0
[ 152.467463] ? __alloc_skb+0x13c/0x2a0
[ 152.468067] ? __build_skb_around+0x330/0x330
[ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower]
[ 152.469503] tc_del_tfilter+0x718/0x1330
[ 152.470115] ? is_bpf_text_address+0xa/0x20
[ 152.470765] ? tc_ctl_chain+0xee0/0xee0
[ 152.471335] ? __kernel_text_address+0xe/0x30
[ 152.471948] ? unwind_get_return_address+0x56/0xa0
[ 152.472639] ? __thaw_task+0x150/0x150
[ 152.473218] ? arch_stack_walk+0x98/0xf0
[ 152.473839] ? __stack_depot_save+0x35/0x4c0
[ 152.474501] ? stack_trace_save+0x91/0xc0
[ 152.475119] ? security_capable+0x51/0x90
[ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0
[ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.477042] ? __sys_sendmsg+0xb5/0x140
[ 152.477664] ? do_syscall_64+0x3d/0x90
[ 152.478255] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.479010] ? __stack_depot_save+0x35/0x4c0
[ 152.479679] ? __stack_depot_save+0x35/0x4c0
[ 152.480346] netlink_rcv_skb+0x12c/0x360
[ 152.480929] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.481517] ? do_syscall_64+0x3d/0x90
[ 152.482061] ? netlink_ack+0x1550/0x1550
[ 152.482612] ? rhashtable_walk_peek+0x170/0x170
[ 152.483262] ? kmem_cache_alloc_node+0x1af/0x390
[ 152.483875] ? _copy_from_iter+0x3d6/0xc70
[ 152.484528] netlink_unicast+0x553/0x790
[ 152.485168] ? netlink_attachskb+0x6a0/0x6a0
[ 152.485848] ? unwind_next_frame+0x11cc/0x1a10
[ 152.486538] ? arch_stack_walk+0x61/0xf0
[ 152.487169] netlink_sendmsg+0x7a1/0xcb0
[ 152.487799] ? netlink_unicast+0x790/0x790
[ 152.488355] ? iovec_from_user.part.0+0x4d/0x220
[ 152.488990] ? _raw_spin_lock+0x7a/0xd0
[ 152.489598] ? netlink_unicast+0x790/0x790
[ 152.490236] sock_sendmsg+0xc5/0x190
[ 152.490796] ____sys_sendmsg+0x535/0x6b0
[ 152.491394] ? import_iovec+0x7/0x10
[ 152.491964] ? kernel_sendmsg+0x30/0x30
[ 152.492561] ? __copy_msghdr+0x3c0/0x3c0
[ 152.493160] ? do_syscall_64+0x3d/0x90
[ 152.493706] ___sys_sendmsg+0xeb/0x170
[ 152.494283] ? may_open_dev+0xd0/0xd0
[ 152.494858] ? copy_msghdr_from_user+0x110/0x110
[ 152.495541] ? __handle_mm_fault+0x2678/0x4ad0
[ 152.496205] ? copy_page_range+0x2360/0x2360
[ 152.496862] ? __fget_light+0x57/0x520
[ 152.497449] ? mas_find+0x1c0/0x1c0
[ 152.498026] ? sockfd_lookup_light+0x1a/0x140
[ 152.498703] __sys_sendmsg+0xb5/0x140
[ 152.499306] ? __sys_sendmsg_sock+0x20/0x20
[ 152.499951] ? do_user_addr_fault+0x369/0xd80
[ 152.500595] do_syscall_64+0x3d/0x90
[ 152.501185] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.501917] RIP: 0033:0x7f5eb294f887
[ 152.502494] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 152.505008] RSP: 002b:
00007ffd2c708f78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 152.506152] RAX:
ffffffffffffffda RBX:
00000000642d9472 RCX:
00007f5eb294f887
[ 152.507134] RDX:
0000000000000000 RSI:
00007ffd2c708fe0 RDI:
0000000000000003
[ 152.508113] RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000000
[ 152.509119] R10:
00007f5eb2808708 R11:
0000000000000246 R12:
0000000000000001
[ 152.510068] R13:
0000000000000000 R14:
00007ffd2c70d1b8 R15:
0000000000485400
[ 152.511031] </TASK>
[ 152.511444] Modules linked in: cls_flower sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
[ 152.515720] ---[ end trace
0000000000000000 ]---
Fixes:
08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shenwei Wang [Thu, 4 May 2023 15:35:17 +0000 (10:35 -0500)]
net: fec: correct the counting of XDP sent frames
In the current xdp_xmit implementation, if any single frame fails to
transmit due to insufficient buffer descriptors, the function nevertheless
reports success in sending all frames. This results in erroneously
indicating that frames were transmitted when in fact they were dropped.
This patch fixes the issue by ensureing the return value properly
indicates the actual number of frames successfully transmitted, rather than
potentially reporting success for all frames when some could not transmit.
Fixes:
6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Thu, 4 May 2023 09:52:49 +0000 (11:52 +0200)]
bonding: add xdp_features support
Introduce xdp_features support for bonding driver according to the slave
devices attached to the master one. xdp_features is required whenever we
want to xdp_redirect traffic into a bond device and then into selected
slaves attached to it.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes:
66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Fang [Thu, 4 May 2023 08:03:59 +0000 (16:03 +0800)]
net: enetc: check the index of the SFI rather than the handle
We should check whether the current SFI (Stream Filter Instance) table
is full before creating a new SFI entry. However, the previous logic
checks the handle by mistake and might lead to unpredictable behavior.
Fixes:
888ae5a3952b ("net: enetc: add tc flower psfp offload driver")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Thu, 4 May 2023 07:28:01 +0000 (08:28 +0100)]
sfc: Add back mailing list
We used to have a mailing list in the MAINTAINERS file, but removed this
when we became part of Xilinx as it stopped working.
Now inside AMD we have the list again. Add it back so patches will be seen
by all sfc developers.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenliang Wang [Thu, 4 May 2023 02:27:06 +0000 (10:27 +0800)]
virtio_net: suppress cpu stall when free_unused_bufs
For multi-queue and large ring-size use case, the following error
occurred when free_unused_bufs:
rcu: INFO: rcu_sched self-detected stall on CPU.
Fixes:
986a4f4d452d ("virtio_net: multiqueue support")
Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Swiatkowski [Wed, 3 May 2023 15:39:35 +0000 (08:39 -0700)]
ice: block LAN in case of VF to VF offload
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback
enable bit in case of all ingress type rules added via the tc tool.
Fixes:
0d08a441fb1a ("ice: ndo_setup_tc implementation for PF")
Reported-by: Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arınç ÜNAL [Tue, 2 May 2023 21:09:47 +0000 (00:09 +0300)]
net: dsa: mt7530: fix network connectivity with multiple CPU ports
On mt753x_cpu_port_enable() there's code that enables flooding for the CPU
port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports
are enabled, port 6 becomes the only port to forward the frames to. But
port 5 is the active port, so no frames received from the user ports will
be forwarded to port 5 which breaks network connectivity.
Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix
this issue by setting the bit that corresponds to the CPU port without
overwriting the other bits.
Clear the bits beforehand only for the MT7531 switch. According to the
documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference
Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and
UNU_FFP bits are set to 1 for MT7531, 0 for MT7530.
The commit
5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user
ports") silently changed the method to set the bits on the MT7530_MFC.
Instead of clearing the relevant bits before mt7530_cpu_port_enable()
which runs under a for loop, the commit started doing it on
mt7530_cpu_port_enable().
Back then, this didn't really matter as only a single CPU port could be
used since the CPU port number was hardcoded. The driver was later changed
with commit
1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp
instead of constant") to retrieve the CPU port via dp->cpu_dp. With that,
this silent change became an issue for when using multiple CPU ports.
Fixes:
5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arınç ÜNAL [Tue, 2 May 2023 21:09:46 +0000 (00:09 +0300)]
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
The multi-chip module MT7530 switch with a 40 MHz oscillator on the
MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using
trgmii.
This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL,
hence using the ncpo1 value, 0x0780.
My testing shows this value works on Unielec U7621-06, Bartel's testing
shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices
tested have got 40 MHz oscillators.
Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The
definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code
whilst 150 MHz PLL don't.
Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz
oscillator on the said MT7621 SoCs works fine because the ncpo1 value
defined for it is for 125 MHz PLL.
Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL
ncpo1 values for both oscillator frequencies.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195
Fixes:
7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support")
Tested-by: Bartel Eerdekens <bartel.eerdekens@constell8.be>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 5 May 2023 01:33:56 +0000 (18:33 -0700)]
Merge tag 'linux-watchdog-6.4-rc1' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog driver for StarFive JH7100 and JH7110 Soc
- Add Rockchip RK3588 devices
- Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices
- Add Mediatke MT8365 and MT6735 devices
- Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog
- Convert watchdog platform drivers to return void on the remove
callback
- Convert to devm_clk_get_enabled() helpers
- ... and other small fixes and improvements
* tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits)
watchdog: dw_wdt: Simplify clk management
watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()
watchdog: starfive: Fix the warning of starfive_wdt_match
watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled
MAINTAINERS: Add fragment for Xilinx watchdog driver
watchdog: menz069_wdt: fix timeout setting
watchdog: menz069_wdt: fix watchdog initialisation
dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
watchdog: loongson1_wdt: Implement restart handler
dt-bindings: watchdog: Document Qualcomm SM6115 watchdog
dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names
dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties
dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties
dt-bindings: watchdog: arm,sp805: drop unneeded minItems
dt-bindings: watchdog: drop duplicated GPIO watchdog bindings
dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT
drivers: watchdog: Add StarFive Watchdog driver
dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
dt-bindings: watchdog: indentation, quotes and white-space cleanup
watchdog: ebc-c384_wdt: Mark status as orphaned
...
Dave Airlie [Fri, 5 May 2023 01:27:25 +0000 (11:27 +1000)]
Merge tag 'drm-intel-next-fixes-2023-05-04-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Add missing GPU transcoder masks for MTL and fix DSI power on sequence
for Nextbook Ares 8A. Fix GuC version corner case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Fri, 5 May 2023 01:27:08 +0000 (11:27 +1000)]
Merge tag 'amd-drm-fixes-6.4-2023-05-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.4-2023-05-03:
amdgpu:
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com
Dave Airlie [Fri, 5 May 2023 01:23:11 +0000 (11:23 +1000)]
Merge tag 'drm-intel-next-fixes-2023-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
One cc stable for pipe source size check on SKL+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Thu, 4 May 2023 23:13:21 +0000 (09:13 +1000)]
Merge tag 'amd-drm-fixes-6.4-2023-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.4-2023-04-26:
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com
Conor Dooley [Tue, 4 Apr 2023 18:03:22 +0000 (19:03 +0100)]
dt-bindings: perf: riscv,pmu: fix property dependencies
Seemingly I mis-implemented the dependencies here. The OpenSBI docs only
point out that the "riscv,event-to-mhpmcounters property is mandatory if
riscv,event-to-mhpmevent is present". It never claims that
riscv,event-to-mhpmcounters requires riscv,event-to-mhpmevent.
Drop the dependency of riscv,event-to-mhpmcounters on
riscv,event-to-mhpmevent.
Fixes:
7e38085d9c59 ("dt-bindings: riscv: add SBI PMU event mappings")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230404-tractor-confusing-8852e552539a@spud
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Thu, 4 May 2023 21:48:02 +0000 (14:48 -0700)]
Merge tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A few filesystem improvements, with a rather nasty use-after-free fix
from Xiubo intended for stable"
* tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client:
ceph: reorder fields in 'struct ceph_snapid_map'
ceph: pass ino# instead of old_dentry if it's disconnected
ceph: fix potential use-after-free bug when trimming caps
ceph: implement writeback livelock avoidance using page tagging
ceph: do not print the whole xattr value if it's too long
Linus Torvalds [Thu, 4 May 2023 21:37:53 +0000 (14:37 -0700)]
Merge tag '9p-6.4-for-linus' of git://git./linux/kernel/git/ericvh/v9fs
Pull 9p updates from Eric Van Hensbergen:
"This includes a number of patches that didn't quite make the cut last
merge window while we addressed some outstanding issues and review
comments. It includes some new caching modes for those that only want
readahead caches and reworks how we do writeback caching so we are not
keeping extra references around which both causes performance problems
and uses lots of additional resources on the server.
It also includes a new flag to force disabling of xattrs which can
also cause major performance issues, particularly if the underlying
filesystem on the server doesn't support them.
Finally it adds a couple of additional mount options to better support
directio and enabling caches when the server doesn't support
qid.version.
There was one late-breaking bug report that has also been included as
its own patch where I forgot to propagate an embarassing bit-logic fix
to the various variations of open"
* tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: Fix bit operation logic error
fs/9p: Rework cache modes and add new options to Documentation
fs/9p: remove writeback fid and fix per-file modes
fs/9p: Add new mount modes
9p: Add additional debug flags and open modes
fs/9p: allow disable of xattr support on mount
fs/9p: Remove unnecessary superblock flags
fs/9p: Consolidate file operations and add readahead and writeback
Jason Andryuk [Thu, 4 May 2023 19:47:23 +0000 (15:47 -0400)]
9p: Remove INET dependency
9pfs can run over assorted transports, so it doesn't have an INET
dependency. Drop it and remove the includes of linux/inet.h.
NET_9P_FD/trans_fd.o builds without INET or UNIX and is usable over
plain file descriptors. However, tcp and unix functionality is still
built and would generate runtime failures if used. Add imply INET and
UNIX to NET_9P_FD, so functionality is enabled by default but can still
be explicitly disabled.
This allows configuring 9pfs over Xen with INET and UNIX disabled.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 4 May 2023 20:21:16 +0000 (13:21 -0700)]
Merge tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git./linux/kernel/git/akpm/mm
Pull hitfixes from Andrew Morton:
"Five hotfixes. Three are cc:stable, two for this -rc cycle"
* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: change per-VMA lock statistics to be disabled by default
MAINTAINERS: update Michal Simek's email
mm/mempolicy: correctly update prev when policy is equal on mbind
relayfs: fix out-of-bounds access in relay_file_read
kasan: hw_tags: avoid invalid virt_to_page()
Michal Simek [Wed, 3 May 2023 08:40:55 +0000 (10:40 +0200)]
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
Naga is no longer works for AMD/Xilinx and there is no activity from him to
continue to maintain Xilinx related drivers. Two drivers have Miquel as
maintainer and for the last one add myself instead to be kept in a loop if
there is any change required.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6b4cdc7158599b4a38409a03eda56e38975b6233.1683103250.git.michal.simek@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Thu, 4 May 2023 20:09:43 +0000 (13:09 -0700)]
Merge tag 'mm-stable-2023-05-03-16-22' of git://git./linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
ioctl's behavior more similar to KSM's behavior.
[ Andrew called these "final", but I suspect we'll have a series fixing
up the fact that the last commit in the dmapools series in the
previous pull seems to have unintentionally just reverted all the
other commits in the same series.. - Linus ]
* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hwpoison: coredump: support recovery from dump_user_range()
mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
mm/ksm: move disabling KSM from s390/gmap code to KSM code
selftests/ksm: ksm_functional_tests: add prctl unmerge test
mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
mm/damon/paddr: minor refactor of damon_pa_pageout()
Linus Torvalds [Thu, 4 May 2023 19:45:32 +0000 (12:45 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A few arm64 fixes that came in during the merge window for -rc1.
The main thing is restoring the pointer authentication hwcaps, which
disappeared during some recent refactoring
- Fix regression in CPU erratum workaround when disabling the MMU
- Fix detection of pointer authentication hwcaps
- Avoid writeable, executable ELF sections in vmlinux"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: lds: move .got section out of .text
arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text
arm64: cpufeature: Fix pointer auth hwcaps
arm64: Fix label placement in record_mmu_state()
Linus Torvalds [Thu, 4 May 2023 19:40:16 +0000 (12:40 -0700)]
Merge tag 'loongarch-6.4' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Better backtraces for humanization
- Relay BCE exceptions to userland as SIGSEGV
- Provide kernel fpu functions
- Optimize memory ops (memset/memcpy/memmove)
- Optimize checksum and crc32(c) calculation
- Add ARCH_HAS_FORTIFY_SOURCE selection
- Add function error injection support
- Add ftrace with direct call support
- Add basic perf tools support
* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
tools/perf: Add basic support for LoongArch
LoongArch: ftrace: Add direct call trampoline samples support
LoongArch: ftrace: Add direct call support
LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
LoongArch: Add support for function error injection
LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
LoongArch: crypto: Add crc32 and crc32c hw acceleration
LoongArch: Add checksum optimization for 64-bit system
LoongArch: Optimize memory ops (memset/memcpy/memmove)
LoongArch: Provide kernel fpu functions
LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
LoongArch: Humanize the ESTAT line when showing registers
LoongArch: Humanize the ECFG line when showing registers
LoongArch: Humanize the EUEN line when showing registers
LoongArch: Humanize the PRMD line when showing registers
LoongArch: Humanize the CRMD line when showing registers
LoongArch: Fix format of CSR lines during show_regs()
...
Linus Torvalds [Thu, 4 May 2023 19:25:05 +0000 (12:25 -0700)]
Merge tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux
Pull arch/csky updates from Guo Ren:
- Remove CPU_TLB_SIZE config
- Prevent spurious page faults
* tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux:
csky: mmu: Prevent spurious page faults
csky: remove obsolete config CPU_TLB_SIZE
Srinivas Pandruvada [Wed, 3 May 2023 23:38:50 +0000 (16:38 -0700)]
thermal: intel: powerclamp: Fix NULL pointer access issue
If cur_state for the powerclamp cooling device is set to the default
minimum state of 0, without setting first to cur_state > 0, this results
in NULL pointer access.
This NULL pointer access happens in the powercap core idle-inject
function idle_inject_set_duration() as there is no NULL check for
idle_inject_device pointer. This pointer must be allocated by calling
idle_inject_register() or idle_inject_register_full().
In the function powerclamp_set_cur_state(), idle_inject_device pointer
is allocated only when the cur_state > 0. But setting 0 without changing
to any other state, idle_inject_set_duration() will be called with a
NULL idle_inject_device pointer.
To address this, just return from powerclamp_set_cur_state() if the
current cooling device state is the same as the last one. Since the
power-up default cooling device state is 0, changing the state to 0
again here will return without calling idle_inject_set_duration().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes:
8526eb7fc75a ("thermal: intel: powerclamp: Use powercap idle-inject feature")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217386
Tested-by: Risto A. Paju <teknohog@iki.fi>
Cc: 6.3+ <stable@kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Fri, 28 Apr 2023 13:23:50 +0000 (15:23 +0200)]
ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes:
a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Guillaume Ranquet [Fri, 14 Apr 2023 16:07:47 +0000 (18:07 +0200)]
phy: mediatek: hdmi: mt8195: fix wrong pll calculus
The clock rate calculus in mtk_hdmi_pll_calc() was wrong when it has
been replaced by 'div_u64'.
Fix the issue by multiplying the values in the denominator instead of
dividing them.
Fixes:
45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-2-bbad62e64321@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Guillaume Ranquet [Fri, 14 Apr 2023 16:07:46 +0000 (18:07 +0200)]
phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
by the kernel test robot.
Fix the issue by removing the variable altogether and testing out the
return value of mtk_hdmi_pll_set_hw()
Fixes:
45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-1-bbad62e64321@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Claudio Imbrenda [Fri, 28 Apr 2023 09:27:53 +0000 (11:27 +0200)]
KVM: s390: fix race in gmap_make_secure()
Fix a potential race in gmap_make_secure() and remove the last user of
follow_page() without FOLL_GET.
The old code is locking something it doesn't have a reference to, and
as explained by Jason and David in this discussion:
https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
it can lead to all kind of bad things, including the page getting
unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the
unlock_page() would target the wrong bit.
There is also another race with the FOLL_WRITE, which could race
between the follow_page() and the get_locked_pte().
The main point is to remove the last use of follow_page() without
FOLL_GET or FOLL_PIN, removing the races can be considered a nice
bonus.
Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes:
214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <
20230428092753.27913-2-imbrenda@linux.ibm.com>
Claudio Imbrenda [Fri, 21 Apr 2023 08:50:36 +0000 (10:50 +0200)]
KVM: s390: pv: fix asynchronous teardown for small VMs
On machines without the Destroy Secure Configuration Fast UVC, the
topmost level of page tables is set aside and freed asynchronously
as last step of the asynchronous teardown.
Each gmap has a host_to_guest radix tree mapping host (userspace)
addresses (with 1M granularity) to gmap segment table entries (pmds).
If a guest is smaller than 2GB, the topmost level of page tables is the
segment table (i.e. there are only 2 levels). Replacing it means that
the pointers in the host_to_guest mapping would become stale and cause
all kinds of nasty issues.
This patch fixes the issue by disallowing asynchronous teardown for
guests with only 2 levels of page tables. Userspace should (and already
does) try using the normal destroy if the asynchronous one fails.
Update s390_replace_asce so it refuses to replace segment type ASCEs.
This is still needed in case the normal destroy VM fails.
Fixes:
fb491d5500a7 ("KVM: s390: pv: asynchronous destroy for reboot")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <
20230421085036.52511-2-imbrenda@linux.ibm.com>
Paolo Abeni [Thu, 4 May 2023 08:48:10 +0000 (10:48 +0200)]
Merge tag 'nf-23-05-03' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains one Netfilter fix:
1) Restore 'ct state untracked' matching with CONFIG_RETPOLINE=y,
from Florian Westphal.
* tag 'nf-23-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix ct untracked match breakage
====================
Link: https://lore.kernel.org/r/20230503201143.12310-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Guchun Chen [Wed, 26 Apr 2023 01:46:54 +0000 (09:46 +0800)]
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes:
f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Samson Tam [Wed, 19 Apr 2023 22:17:14 +0000 (18:17 -0400)]
drm/amd/display: filter out invalid bits in pipe_fuses
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Leo Chen [Thu, 13 Apr 2023 21:34:24 +0000 (17:34 -0400)]
drm/amd/display: Change default Z8 watermark values
[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Horace Chen [Tue, 25 Apr 2023 05:15:32 +0000 (13:15 +0800)]
drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chia-I Wu [Wed, 26 Apr 2023 22:54:55 +0000 (15:54 -0700)]
drm/amdgpu: add a missing lock for AMDGPU_SCHED
mgr->ctx_handles should be protected by mgr->lock.
v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes:
52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Tue, 2 May 2023 15:59:08 +0000 (11:59 -0400)]
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
As made mention of in commit
08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit
13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes:
3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Horatio Zhang [Tue, 25 Apr 2023 02:52:28 +0000 (10:52 +0800)]
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes:
c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org
Horatio Zhang [Tue, 25 Apr 2023 05:16:32 +0000 (13:16 +0800)]
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.
[ 102.980303] Call Trace:
[ 102.980303] <TASK>
[ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.980740] process_one_work+0x21f/0x3f0
[ 102.980741] worker_thread+0x200/0x3e0
[ 102.980742] ? process_one_work+0x3f0/0x3f0
[ 102.980743] kthread+0xfd/0x130
[ 102.980743] ? kthread_complete_and_exit+0x20/0x20
[ 102.980744] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes:
c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org
Shane Xiao [Tue, 25 Apr 2023 14:39:08 +0000 (22:39 +0800)]
drm/amdgpu: Enable doorbell selfring after resize FB BAR
[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.
[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.
This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.
v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
lyndonli [Sun, 23 Apr 2023 09:05:15 +0000 (17:05 +0800)]
drm/amdgpu: Use the default reset when loading or reloading the driver
Below call trace and errors are observed when reloading
amdgpu driver with the module parameter reset_method=3.
It should do a default reset when loading or reloading the
driver, regardless of the module parameter reset_method.
v2: add comments inside and modify commit messages.
[ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed
and response status is (0x0)
[ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[ +0.000004] Call Trace:
[ +0.000003] <TASK>
[ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm]
[ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm]
[ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu]
[ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[ +0.001071] ? do_pci_enable_device+0xe1/0x110
[ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
lyndonli [Sun, 23 Apr 2023 08:46:30 +0000 (16:46 +0800)]
drm/amdgpu: Fix mode2 reset for sienna cichlid
Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Thu, 4 May 2023 02:41:59 +0000 (19:41 -0700)]
Merge tag 'parisc-for-6.4-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Two important fixes in here:
- The argument pointer register was wrong when calling 64-bit
firmware functions, which may cause random memory corruption or
crashes.
- Ensure page alignment in cache flush functions, otherwise not all
memory might get flushed.
The rest are cleanups (mmap implementation, panic path) and usual
smaller updates.
Summary:
- Calculate correct argument pointer in real64_call_asm()
- Cleanup mmap implementation regarding color alignment (John David
Anglin)
- Spinlock fixes in panic path (Guilherme G. Piccoli)
- build doc update for parisc64 (Randy Dunlap)
- Ensure page alignment in flush functions"
* tag 'parisc-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix argument pointer in real64_call_asm()
parisc: Cleanup mmap implementation regarding color alignment
parisc: Drop HP-UX constants and structs from grfioctl.h
parisc: Ensure page alignment in flush functions
parisc: Replace regular spinlock with spin_trylock on panic path
parisc: update kbuild doc. aliases for parisc64
parisc: Limit amount of kgdb breakpoints on parisc
Linus Torvalds [Thu, 4 May 2023 02:19:34 +0000 (19:19 -0700)]
Merge tag 'modules-6.4-rc1-v2' of git://git./linux/kernel/git/mcgrof/linux
Pull modules fix from Luis Chamberlain:
"One fix by Arnd far for modules which came in after the first pull
request.
The issue was found as part of some late compile tests with 0-day. I
take it 0-day does some secondary late builds with after some initial
ones"
* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: include internal.h in module/dups.c
Linus Torvalds [Thu, 4 May 2023 02:08:20 +0000 (19:08 -0700)]
Merge tag 'sysctl-6.4-rc1-v2' of git://git./linux/kernel/git/mcgrof/linux
Pull more sysctl updates from Luis Chamberlain:
"As mentioned on my first pull request for sysctl-next, for v6.4-rc1
we're very close to being able to deprecating register_sysctl_paths().
I was going to assess the situation after the first week of the merge
window.
That time is now and things are looking good. We only have one which
had already an ACK for so I'm picking this up here now and the last
patch is the one that uses an axe.
I have boot tested the last patch and 0-day build completed
successfully"
* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove register_sysctl_paths()
kernel: pid_namespace: simplify sysctls with register_sysctl()
Linus Torvalds [Thu, 4 May 2023 02:02:03 +0000 (19:02 -0700)]
Merge tag 'uml-for-linus-6.4-rc1' of git://git./linux/kernel/git/uml/linux
Pull uml updates from Richard Weinberger:
- Make stub data pages configurable
- Make it harder to mix user and kernel code by accident
* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: make stub data pages size tweakable
um: prevent user code in modules
um: further clean up user_syms
um: don't export printf()
um: hostfs: define our own API boundary
um: add __weak for exported functions
Linus Torvalds [Thu, 4 May 2023 01:58:59 +0000 (18:58 -0700)]
Merge tag 'ubifs-for-linus-6.4-rc1' of git://git./linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Fix error value for try_write_vid_and_data()
- Minor cleanups
UBIFS:
- Fixes for various memory leaks
- Minor cleanups"
* tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Fix memleak when insert_old_idx() failed
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
ubifs: Fix memory leak in do_rename
ubifs: Free memory for tmpfile name
ubi: Fix return value overwrite issue in try_write_vid_and_data()
ubifs: Remove return in compr_exit()
ubi: Simplify bool conversion
Linus Torvalds [Wed, 3 May 2023 19:01:05 +0000 (12:01 -0700)]
Merge tag 'pm-6.4-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix a hibernation test mode regression and clean up the
intel_idle driver.
Specifics:
- Make test_resume work again after the changes that made hibernation
open the snapshot device in exclusive mode (Chen Yu)
- Clean up code in several places in intel_idle (Artem Bityutskiy)"
* tag 'pm-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: mark few variables as __read_mostly
intel_idle: do not sprinkle module parameter definitions around
intel_idle: fix confusing message
intel_idle: improve C-state flags handling robustness
intel_idle: further intel_idle_init_cstates_icpu() cleanup
intel_idle: clean up intel_idle_init_cstates_icpu()
intel_idle: use pr_info() instead of printk()
PM: hibernate: Do not get block device exclusively in test_resume mode
PM: hibernate: Turn snapshot_test into global variable
Linus Torvalds [Wed, 3 May 2023 18:49:57 +0000 (11:49 -0700)]
Merge tag 'acpi-6.4-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add two ACPI-related quirks and extend support for Apple device
properties supplied via ACPI _DSM.
Specifics:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede)
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin)
- Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch)"
* tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Support strings in Apple _DSM props
ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
Linus Torvalds [Wed, 3 May 2023 18:46:01 +0000 (11:46 -0700)]
Merge tag 'thermal-6.4-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly cleanups on top of the previously merged thermal
control changes plus some driver fixes and the removal of the Intel
Menlow thermal driver.
Specifics:
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix comments for the cpuidle_cooling_register() function to match
the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)
- Clean up the step-wise thermal governor (Zhang Rui)
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano)
- Clean up the ACPI thermal driver a bit (Daniel Lezcano)
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki)"
* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
Linus Torvalds [Wed, 3 May 2023 18:25:01 +0000 (11:25 -0700)]
Merge tag 'pwm/for-6.4-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The bulk of this is trivial conversions to the new .remove_new()
callback for drivers as part of Uwe's effort to clean that up.
Other than that a driver is added for Apple devices and various small
fixes are included for existing drivers.
Last but not least, this finally gets rid of the old pwm_request() and
pwm_free() APIs are removed since the last user was dropped in v6.3"
* tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
pwm: Remove unused radix tree
pwm: Delete deprecated functions pwm_request() and pwm_free()
pwm: meson: Fix g12a ao clk81 name
pwm: meson: Fix axg ao mux parents
pwm: stm32: Enforce settings for PWM capture
MAINTAINERS: Add entries for Apple PWM driver
pwm: Add Apple PWM controller
dt-bindings: pwm: Add Apple PWM controller
pwm: mtk-disp: Configure double buffering before reading in .get_state()
pwm: mtk-disp: Disable shadow registers before setting backlight values
pwm: stm32-lp: Drop of_match_ptr for ID table
pwm: rcar: Drop of_match_ptr for ID table
dt-bindings: pwm: Convert Amlogic Meson PWM binding
dt-bindings: pwm: mediatek: Add mediatek,mt7986 compatible
pwm: xilinx: Convert to platform remove callback returning void
pwm: vt8500: Convert to platform remove callback returning void
pwm: tiehrpwm: Convert to platform remove callback returning void
pwm: tiecap: Convert to platform remove callback returning void
pwm: tegra: Convert to platform remove callback returning void
pwm: sun4i: Convert to platform remove callback returning void
...
Linus Torvalds [Wed, 3 May 2023 18:21:07 +0000 (11:21 -0700)]
Merge tag 'soundwire-6.4-rc1' of git://git./linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This features AMD soundwire controller driver, a bunch of Intel
changes for future platform support, sdw API updates etc:
- Support for AMD soundwire controller
- Intel driver updates to support future platforms
- Core API sdw_nread/nwrite_no_pm updates to handle page boundaries"
* tag 'soundwire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (38 commits)
soundwire: intel_auxdevice: improve pm_prepare step
soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
soundwire: intel: don't save hw_params for use in prepare
soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries
soundwire: bus: Update kernel doc for no_pm functions
soundwire: bus: Remove now outdated comments on no_pm IO
soundwire: stream: uniquify dev_err() logs
soundwire: stream: remove bus->dev from logs on multiple buses
soundwire: amd: add pm_prepare callback and pm ops support
soundwire: amd: handle SoundWire wake enable interrupt
soundwire: amd: add runtime pm ops for AMD SoundWire manager driver
soundwire: amd: add SoundWire manager interrupt handling
soundwire: amd: enable build for AMD SoundWire manager driver
soundwire: amd: register SoundWire manager dai ops
soundwire: amd: Add support for AMD Manager driver
soundwire: export sdw_compute_slave_ports() function
soundwire: stream: restore cumulative bus bandwidth when compute_params callback failed
soundwire: bandwidth allocation: Use hweight32() to calculate set bits
soundwire: qcom: gracefully handle too many ports in DT
soundwire: qcom: define hardcoded version magic numbers
...
Linus Torvalds [Wed, 3 May 2023 18:17:34 +0000 (11:17 -0700)]
Merge tag 'phy-for-6.4' of git://git./linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New support:
- UFS PHY for Qualcomm SA8775p, SM7150
- PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
- Mediatke hdmi phy support for mt8195
- rockchip naneng combo phy support for RK358
Updates:
- Drop Thunder Bay eMMC PHY driver
- RC support for PCIe phy for Qualcomm SDX55
- SGMII support in WIZ driver for J721E
- PCIe and multilink SGMII PHY support in cadence driver
- Big pile of platform remove callback returning void conversions"
* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: cadence: cdns-dphy-rx: Add common module reset support
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
phy: mediatek: add support for phy-mtk-hdmi-mt8195
phy: phy-mtk-hdmi: Add generic phy configure callback
dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
dt-bindings: phy: cadence-torrent: drop assigned-clocks
dt-bindings: phy: cadence-sierra: drop assigned-clocks
phy: rockchip: remove unused hw_to_inno function
phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
phy: qcom-qmp-ufs: Add SM7150 support
...
Linus Torvalds [Wed, 3 May 2023 18:11:56 +0000 (11:11 -0700)]
Merge tag 'dmaengine-6.4-rc1' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
Linus Torvalds [Wed, 3 May 2023 18:00:27 +0000 (11:00 -0700)]
Merge tag 'for-6.4-rc1' of git://git./linux/kernel/git/pateldipen1984/linux
Pull hardware timestamp engine updates from Dipen Patel:
"The changes for the hte subsystem include:
- Add Tegra234 HTE provider and relevant DT bindings
- Update MAINTAINERS file for the HTE subsystem"
* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
hte: tegra-194: Use proper includes
hte: Use device_match_of_node()
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
hte: tegra: fix 'struct of_device_id' build error
hte: Use of_property_present() for testing DT property presence
gpio: tegra186: Add Tegra234 hte support
hte: handle nvidia,gpio-controller property
hte: Deprecate nvidia,slices property
hte: Add Tegra234 provider
hte: Re-phrase tegra API document
arm64: tegra: Add Tegra234 GTE nodes
dt-bindings: timestamp: Deprecate nvidia,slices property
dt-bindings: timestamp: Add Tegra234 support
MAINTAINERS: Add HTE/timestamp subsystem details
Linus Torvalds [Wed, 3 May 2023 17:13:41 +0000 (10:13 -0700)]
x86-64: mm: clarify the 'positive addresses' user address rules
Dave Hansen found the "(long) addr >= 0" code in the x86-64 access_ok
checks somewhat confusing, and suggested using a helper to clarify what
the code is doing.
So this does exactly that: clarifying what the sign bit check is all
about, by adding a helper macro that makes it clear what it is testing.
This also adds some explicit comments talking about how even with LAM
enabled, any addresses with the sign bit will still GP-fault in the
non-canonical region just above the sign bit.
This is all what allows us to do the user address checks with just the
sign bit, and furthermore be a bit cavalier about accesses that might be
done with an additional offset even past that point.
(And yes, this talks about 'positive' even though zero is also a valid
user address and so technically we should call them 'non-negative'. But
I don't think using 'non-negative' ends up being more understandable).
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 3 May 2023 16:38:58 +0000 (09:38 -0700)]
x86: mm: remove 'sign' games from LAM untagged_addr*() macros
The intent of the sign games was to not modify kernel addresses when
untagging them. However, that had two issues:
(a) it didn't actually work as intended, since the mask was calculated
as 'addr >> 63' on an _unsigned_ address. So instead of getting a
mask of all ones for kernel addresses, you just got '1'.
(b) untagging a kernel address isn't actually a valid operation anyway.
Now, (a) had originally been true for both 'untagged_addr()' and the
remote version of it, but had accidentally been fixed for the regular
version of untagged_addr() by commit
e0bddc19ba95 ("x86/mm: Reduce
untagged_addr() overhead for systems without LAM"). That one rewrote
the shift to be part of the alternative asm code, and in the process
changed the unsigned shift into a signed 'sar' instruction.
And while it is true that we don't want to turn what looks like a kernel
address into a user address by masking off the high bit, that doesn't
need these sign masking games - all it needs is that the mm context
'untag_mask' value has the high bit set.
Which it always does.
So simplify the code by just removing the superfluous (and in the case
of untagged_addr_remote(), still buggy) sign bit games in the address
masking.
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 2 May 2023 23:39:59 +0000 (16:39 -0700)]
x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
The x86 <asm/uaccess.h> file has grown features that are specific to
x86-64 like LAM support and the related access_ok() changes. They
really should be in the <asm/uaccess_64.h> file and not pollute the
generic x86 header.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 2 May 2023 19:35:01 +0000 (12:35 -0700)]
x86: mm: remove architecture-specific 'access_ok()' define
There's already a generic definition of 'access_ok()' in the
asm-generic/access_ok.h header file, and the only difference bwteen that
and the x86-specific one is the added check for WARN_ON_IN_IRQ().
And it turns out that the reason for that check is long gone: it used to
use a "user_addr_max()" inline function that depended on the current
thread, and caused problems in non-thread contexts.
For details, see commits
7c4788950ba5 ("x86/uaccess, sched/preempt:
Verify access_ok() context") and in particular commit
ae31fe51a3cc
("perf/x86: Restore TASK_SIZE check on frame pointer") about how and why
this came to be.
But that "current task" issue was removed in the big set_fs() removal by
Christoph Hellwig in commit
47058bb54b57 ("x86: remove address space
overrides using set_fs()").
So the reason for the test and the architecture-specific access_ok()
define no longer exists, and is actually harmful these days. For
example, it led various 'copy_from_user_nmi()' games (eg using
__range_not_ok() instead, and then later converted to __access_ok() when
that became ok).
And that in turn meant that LAM was broken for the frame following
before this series, because __access_ok() used to not do the address
untagging.
Accessing user state still needs care in many contexts, but access_ok()
is not the place for this test.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds torvalds@linux-foundation.org>
Linus Torvalds [Fri, 28 Apr 2023 19:55:10 +0000 (12:55 -0700)]
x86-64: make access_ok() independent of LAM
The linear address masking (LAM) code made access_ok() more complicated,
in that it now needs to untag the address in order to verify the access
range. See commit
74c228d20a51 ("x86/uaccess: Provide untagged_addr()
and remove tags before address check").
We were able to avoid that overhead in the get_user/put_user code paths
by simply using the sign bit for the address check, and depending on the
GP fault if the address was non-canonical, which made it all independent
of LAM.
And we can do the same thing for access_ok(): simply check that the user
pointer range has the high bit clear. No need to bother with any
address bit masking.
In fact, we can go a bit further, and just check the starting address
for known small accesses ranges: any accesses that overflow will still
be in the non-canonical area and will still GP fault.
To still make syzkaller catch any potentially unchecked user addresses,
we'll continue to warn about GP faults that are caused by accesses in
the non-canonical range. But we'll limit that to purely "high bit set
and past the one-page 'slop' area".
We could probably just do that "check only starting address" for any
arbitrary range size: realistically all kernel accesses to user space
will be done starting at the low address. But let's leave that kind of
optimization for later. As it is, this already allows us to generate
simpler code and not worry about any tag bits in the address.
The one thing to look out for is the GUP address check: instead of
actually copying data in the virtual address range (and thus bad
addresses being caught by the GP fault), GUP will look up the page
tables manually. As a result, the page table limits need to be checked,
and that was previously implicitly done by the access_ok().
With the relaxed access_ok() check, we need to just do an explicit check
for TASK_SIZE_MAX in the GUP code instead. The GUP code already needs
to do the tag bit unmasking anyway, so there this is all very
straightforward, and there are no LAM issues.
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ondrej Mosnacek [Wed, 3 May 2023 14:01:14 +0000 (16:01 +0200)]
tracing: Fix permissions for the buffer_percent file
This file defines both read and write operations, yet it is being
created as read-only. This means that it can't be written to without the
CAP_DAC_OVERRIDE capability. Fix the permissions to allow root to write
to it without the need to override DAC perms.
Link: https://lore.kernel.org/linux-trace-kernel/20230503140114.3280002-1-omosnace@redhat.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
03329f993978 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Helge Deller [Wed, 3 May 2023 14:39:56 +0000 (16:39 +0200)]
parisc: Fix argument pointer in real64_call_asm()
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
John David Anglin [Sun, 26 Feb 2023 18:03:33 +0000 (18:03 +0000)]
parisc: Cleanup mmap implementation regarding color alignment
This change simplifies the randomization of file mapping regions. It
reworks the code to remove duplication. The flow is now similar to
that for mips. Finally, we consistently use the do_color_align variable
to determine when color alignment is needed.
Tested on rp3440.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sun, 23 Apr 2023 19:37:47 +0000 (21:37 +0200)]
parisc: Drop HP-UX constants and structs from grfioctl.h
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Wed, 15 Mar 2023 18:25:15 +0000 (19:25 +0100)]
parisc: Ensure page alignment in flush functions
Matthew Wilcox noticed, that if ARCH_HAS_FLUSH_ON_KUNMAP is defined
(which is the case for PA-RISC), __kunmap_local() calls
kunmap_flush_on_unmap(), which may call the parisc flush functions with
a non-page-aligned address and thus the page might not be fully flushed.
This patch ensures that flush_kernel_dcache_page_asm() and
flush_kernel_dcache_page_asm() will always operate on page-aligned
addresses.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Guilherme G. Piccoli [Mon, 20 Feb 2023 21:11:05 +0000 (18:11 -0300)]
parisc: Replace regular spinlock with spin_trylock on panic path
The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.
Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Randy Dunlap [Sun, 5 Feb 2023 16:37:52 +0000 (08:37 -0800)]
parisc: update kbuild doc. aliases for parisc64
ARCH=parisc64 is now supported for 64-bit parisc builds, so add
this alias to the kbuild.rst documentation.
Fixes:
3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
projects / platform / kernel / linux-starfive.git / log