Neil Armstrong [Wed, 11 Apr 2018 15:08:01 +0000 (17:08 +0200)]
usb: host: dwc3: Add support for multiple PHYs
DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support
for a generic number of PHYs and adapt the code to handle a generic
number of PHYs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Wed, 11 Apr 2018 15:08:00 +0000 (17:08 +0200)]
usb: host: Add simple of glue driver for DWC3 USB Controllers integration
This is a port of the dwc3-of-simple driver from Linux to enable/deassert
clock and resets of a simple DWC3 Controller HW glue.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tom Rini [Wed, 11 Apr 2018 14:05:41 +0000 (10:05 -0400)]
Merge git://git.denx.de/u-boot-ubi
Bradley Bolen [Wed, 4 Apr 2018 16:42:16 +0000 (12:42 -0400)]
ubifs: Change value of mutex_is_locked()
The mutex lock and unlock functions are stubbed out and mutex_is_locked
was 0. This caused asserts to fail in ubifs code when checking that the
mutex was locked. For example,
UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278
Assume that the "mutex" is locked since that is the normal case when it
is checked in the ubifs code.
Signed-off-by: Bradley Bolen <bradleybolen@gmail.com>
Heinrich Schuchardt [Wed, 4 Apr 2018 13:39:20 +0000 (15:39 +0200)]
checkpatch.pl: update from Linux kernel v4.16
Update scripts/checkpatch.pl from upstream.
One of the many corrections is not creating an error for cover-letters.
Reintroduce U-Boot's
5c761ce58666b3a1695697498598f8bf3484a0c7
checkpatch.pl: Add warning for new __packed additions
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Kristian Amlie [Wed, 4 Apr 2018 08:09:57 +0000 (10:09 +0200)]
fw_printenv: Fix crash due to incorrect size for malloc'ed string.
Using sizeof gives the size of the pointer only, not the string. This
could easily lead to crashes when using -l argument.
Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
Heinrich Schuchardt [Tue, 3 Apr 2018 23:54:26 +0000 (01:54 +0200)]
get_maintainer.pl: update from Linux kernel v4.16
The most significant change is the addition of the --self-test option
which allows to run a consistency check on all MAINTAINERS files.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 3 Apr 2018 23:16:08 +0000 (01:16 +0200)]
MAINTAINERS: ARM STM STM32MP: correct file paths
Provide correct file paths.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Neil Armstrong [Tue, 3 Apr 2018 09:44:19 +0000 (11:44 +0200)]
clk: add sandbox test for bulk API
This patch adds the bulk clock API tests for the sandbox test suite.
It's very similar to the main test but only uses the _bulk() API and
checks if the clocks are correctly enabled/disabled.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Neil Armstrong [Tue, 3 Apr 2018 09:44:18 +0000 (11:44 +0200)]
clk: Add get/enable/disable/release for a bulk of clocks
This patch adds a "bulk" API to the clock API in order to get/enable/disable
/release a group of clocks associated with a device.
This bulk API will avoid adding a copy of the same code to manage
a group of clocks in drivers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Neil Armstrong [Tue, 3 Apr 2018 09:40:51 +0000 (11:40 +0200)]
reset: add sandbox test for bulk API
This patch adds the bulk reset API tests for the sandbox test suite.
Unlike the main test, it also check the "other" reset signal using the bulk API
and checks if the resets are correctly asserted/deasserted.
To allow the bulk API to work, and avoid changing the DT, the number of resets
of the sandbox reset controller has been bumped to 101 for the "other" reset
line to be valid.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Neil Armstrong [Tue, 3 Apr 2018 09:40:50 +0000 (11:40 +0200)]
reset: Add get/assert/deassert/release for bulk of reset signals
This patch adds a "bulk" API to the reset API in order to get/deassert/
assert/release a group of reset signals associated with a device.
This bulk API will avoid adding a copy of the same code to manage
a group of reset signals in drivers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 2 Apr 2018 08:42:53 +0000 (02:42 -0600)]
log: Add units to code-size stats in README.log
Without the units these numbers are confusing. Add a comment about the
unit being 'bytes' and mention 'buildman' as the source.
Suggested-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 2 Apr 2018 08:42:39 +0000 (02:42 -0600)]
log: Correct missing free() on error in log_add_filter()
If there is a problem with the parameters to log_add_filter(), the memory
allocated is currently not freed. Fix this.
Reported-by: Coverity (CID: 171962)
Signed-off-by: Simon Glass <sjg@chromium.org>
Guillaume GARDET [Fri, 30 Mar 2018 08:28:19 +0000 (10:28 +0200)]
mkimage: do not fail if there is no print_header function
Commit 253c60a breaks the exit value of 'mkimage -T rkimage'
and print the following error:
mkimage: Can't print header for Rockchip Boot Image support: Success
It is not a failure to not print headers, so just display the warning message,
and finish the function properly.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Patrice Chotard [Fri, 30 Mar 2018 07:22:40 +0000 (09:22 +0200)]
armv7m: disable icache before linux booting
Similarly to ARMV7, on ARMV7M instruction cache memory needs
to be disabled before running linux kernel to avoid kernel to
be stuck.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Neil Armstrong [Thu, 29 Mar 2018 12:56:02 +0000 (14:56 +0200)]
serial: meson: Update compatible with new Linux bindings
The Amlogic Meson SoCs serial bindings were not written when serial
support was pushed into Linux and U-Boot.
A clean bindings document has been merged into Linux tree to correctly
handle the multiple clocks feeding the serial peripheral.
This update the U-Boot serial_meson driver with the new compatible
string for Amlogic Meson GX Socs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Neil Armstrong [Thu, 29 Mar 2018 12:55:25 +0000 (14:55 +0200)]
reset: Add Amlogic Meson Reset Controller
The Amlogic Meson SoCs embeds up to 256 reset lines, add the corresponding
driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Álvaro Fernández Rojas [Sat, 17 Mar 2018 11:22:24 +0000 (12:22 +0100)]
sysreset: syscon: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tom Rini [Mon, 9 Apr 2018 15:06:21 +0000 (11:06 -0400)]
Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblaze
Xilinx changes for v2018.05-rc2
- Various DT changes and sync with mainline kernel
- Various defconfig updates
- Add SPL init for zcu102 revA
- Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
and zc1751-dc3
- Net fixes - xlnx,phy-type
- 64bit axi ethernet support
- arasan: Fix nand write issue
- fpga fixes
- Maintainer file updates
Tom Rini [Mon, 9 Apr 2018 15:05:44 +0000 (11:05 -0400)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Patch queue for efi - 2018-04-09
Highlights this time around:
- Lots of minor spec compliance fixes
- Support full range of GOP BLT commands
- More fine grained error checking
- Network fixes (init, DP)
- Lots of other bug fixes...
Michal Simek [Wed, 28 Mar 2018 13:55:27 +0000 (15:55 +0200)]
arm64: zynqmp: Add support for Xilinx zcu111-revA
Xilinx zcu111 is a customer board. It is reusing some parts from zcu102.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 13:43:51 +0000 (15:43 +0200)]
arm64: zynqmp: Add support for Xilinx zcu106-revA
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 13:36:36 +0000 (15:36 +0200)]
arm64: zynqmp: Add support for zcu104 customer board
Xilinx zcu104 is another customer board. It is sort of zcu102 clone with
some differences.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 13:09:32 +0000 (15:09 +0200)]
arm64: zynqmp: Add support for zc12xx boards
Add support for zc12xx boards. All of them are internal boards for
silicon validation and share very similar base platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 13:00:25 +0000 (15:00 +0200)]
arm64: zynqmp: Add support for zc1751 dc3
zc1751 is based board with dc3 extenstion card which is used for silicon
validation.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 12:37:47 +0000 (14:37 +0200)]
arm64: zynqmp: Add support for zcu100 aka Ultra96 board
Add support for Xilinx zcu100.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 4 Apr 2018 08:41:35 +0000 (10:41 +0200)]
arm64: zynqmp: Get 200MHz clock early for MMC
SPL MMC boot requires to have clock early.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 4 Apr 2018 08:46:49 +0000 (10:46 +0200)]
arm64: zynqmp: Remove pinctrl settings
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Michal Simek [Wed, 4 Apr 2018 08:43:04 +0000 (10:43 +0200)]
arm64: zynqmp: Remove power domain description
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Michal Simek [Wed, 28 Mar 2018 12:49:43 +0000 (14:49 +0200)]
arm64: zynqmp: Add low level initialization for zc1751
Add psu init for zc1751 dc cards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 12:47:16 +0000 (14:47 +0200)]
arm64: zynqmp: Add low level initialization for zcu102-revA
Add psu init for zcu102-revA.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 12:18:19 +0000 (14:18 +0200)]
arm64: zynqmp: Enable Fixed link support
This patch enables the fixed link support for
all ZynqMP boards.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 12:30:35 +0000 (14:30 +0200)]
arm64: zynqmp: Enable mac address randomization for zc1751 dc5
There is no memory which stores mac address that's why generate it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 12:17:19 +0000 (14:17 +0200)]
arm64: zynqmp: Enable ethernet phys for zc1751 dc5
Enable ethernet phys for zc1751 dc5.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Luca Ceresoli [Mon, 12 Mar 2018 16:18:38 +0000 (17:18 +0100)]
arm64: zynqmp: Enable booting to ATF
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.
To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 28 Mar 2018 13:20:48 +0000 (15:20 +0200)]
arm64: zynqmp: Enable pxe and dhcp if commands are enabled
Targets without net can't use pxe or dhcp boot methods.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Fri, 12 Jan 2018 07:14:54 +0000 (12:44 +0530)]
net: phy: xilinx_phy: Read phytype using property xlnx,phy-type
This patch reads phytype from property "xlnx,phy-type" instead
od simply looking for "phy-type". This is to be inline with
Linux and also fixes the issue of detecting it wrongly in
u-boot.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Vipul Kumar [Tue, 23 Jan 2018 09:22:35 +0000 (14:52 +0530)]
axi: ethernet: Added support for 64 bit addressing for axi-ethernet
This patch uses writeq() function to enable greater than 32 bit
addressing of axi-ethernet for the ZynqMP devices.
Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Vipul Kumar [Sat, 10 Mar 2018 12:22:23 +0000 (17:52 +0530)]
nand: arasan_nfc: Fixed NAND write issue
In commit
2453c695185f ("arm64: zynqmp: nand: Fixed NAND erase issue for
size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed
to 0xFFFF and the same macro is used in nand write and so that getting
nand write error.
This patch reverted this macro to the 0xFFFF0000 and used
ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function
which is equal to 0xFFFF.
Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Tue, 6 Mar 2018 12:07:09 +0000 (17:37 +0530)]
fpga: zynq: Add delay after PCFG_PROG_B change
There is delay needed after PCFG_PROGB change if
AES key source is efuse. This fixes the issue of
encrypted bitstream loading with AES efuse as key
source.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Wed, 14 Mar 2018 18:47:24 +0000 (00:17 +0530)]
fpga: zynqmp: Fix the nonsecure bitstream loading issue
Xilfpga library expects the size of bitstream in a pointer
but currenly we are passing the size as a value. This patch
fixes this issue.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 1 Mar 2018 12:14:47 +0000 (17:44 +0530)]
fpga: zynqmp: Update zynqmp_load() as per latest xilfpga
Latest xilfpga expects to set BIT5 of flags for nonsecure
bitsream and also expects length in bytes instead of words
This patch does the same.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Nitin Jain [Fri, 16 Feb 2018 11:59:54 +0000 (17:29 +0530)]
fpga: zynqmp: Add support to get the PCAP status for fpga info command
This patch adds support for ZynqMP platform to print FPGA PCAP status
for "fpga status" command.
Signed-off-by: Nitin Jain <nitinj@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 21 Feb 2018 12:59:21 +0000 (13:59 +0100)]
clk: zynqmp: Add new compatible string for clock driver
New and old clk drivers are sharing IDs and descriptions.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 11:49:05 +0000 (13:49 +0200)]
arm: zynq: Use fixed partitions for spi flash for zc770 xm010
Sync with mainline.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 11:48:51 +0000 (13:48 +0200)]
arm: zynq: Fix eeprom dt nodes
- Use eeprom for node name
- Use atmel compatible string instead of at.
- Add missing labels
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Javier Martinez Canillas [Thu, 15 Jun 2017 18:54:12 +0000 (20:54 +0200)]
ARM: dts: zynq: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 6 Feb 2018 13:00:30 +0000 (14:00 +0100)]
arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
i2c muxes should described like this.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 11:43:05 +0000 (13:43 +0200)]
arm: zynq: Sync up licenses with mainline kernel
Use different location for SPDX line. Also update dates for new mainline
DTS files.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 12:31:42 +0000 (14:31 +0200)]
arm: zynq: Remove 0x prefixes from cc108
The patch fixing issues reported by DTC:
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@
e000d000/flash@0/partition@0x400000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@
e000d000/flash@0/partition@0x800000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@
e000d000/flash@0/partition@0xc00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@
e000d000/flash@0/partition@0xd00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@
e000d000/flash@0/partition@0xf00000 unit name should not have
leading "0x"
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 14:21:42 +0000 (16:21 +0200)]
arm64: zynqmp: Remove double spaces from dts file
There is no reason to have double spaces for indentation.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 10:48:30 +0000 (12:48 +0200)]
arm64: zynqmp: Add silabs prefix to u69 for zcu102
Add vendor prefix to si5341.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 08:39:53 +0000 (10:39 +0200)]
arm64: zynqmp: Remove number from clock-generator node name
There shouldn't be a number appended based on spec.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 08:47:26 +0000 (10:47 +0200)]
arm64: zynqmp: Remove u-boot commands from dts files
U-Boot commands shouldn't be the part of kernel DTS files.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Srinivas Goud [Tue, 22 Aug 2017 09:08:46 +0000 (14:38 +0530)]
arm64: zynqmp: Update sd properties for dc5
This patch adds no-1-8-v below properties to sd node for dc5 board dts.
Signed-off-by: Srinivas Goud <srinivas.goud@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 14:10:25 +0000 (16:10 +0200)]
arm64: zynqmp: Enable ttcs for zc1751 dc5
Enable TTCs for this target as is done in Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 11:15:17 +0000 (13:15 +0200)]
arm64: zynqmp: Add eeprom reference to eeprom nodes
eeprom can contain information which can be used by nvmem drivers.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 08:54:25 +0000 (10:54 +0200)]
arm64: zynqmp: Use atmel prefix instead of at
This changes was done in mainline and this patch is just following it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 11:09:15 +0000 (13:09 +0200)]
arm64: zynqmp: Fix spi flash partition definition for zc1751 dc2
Using different node name and label partitions as data.
Also use latest compatible strings based on mainline review.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 10:50:04 +0000 (12:50 +0200)]
arm64: zynqmp: Use s/_/-/g in node name for zcu102 rev1.0
Follow spec for node names.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 10:13:13 +0000 (12:13 +0200)]
arm64: zynqmp: Use keycode from input/input.h
Instead of hardcoding numbers.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 10:01:24 +0000 (12:01 +0200)]
arm64: zynqmp: Remove additional comments from dts files
Remove additional comments which were removed as the part of upstreaming.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 08:36:39 +0000 (10:36 +0200)]
arm64: zynqmp: Sync up license with mainline kernel
Mainline Linux kernel has adopted SPDX header license in a different
format then was used before. This patch is syncing it up.
Also update years in License text and remove Nathalie's email because it
is no longer valid.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 08:38:08 +0000 (10:38 +0200)]
arm64: zynqmp: Use i2c-mux instead of i2cswitch instead
Based on review from mainline i2c-mux is standard name for i2c switches.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 27 Mar 2018 08:52:40 +0000 (10:52 +0200)]
arm64: zynqmp: Use maxim prefix for all maxim chips
Use vendor prefix for Maxim chips.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 17 Jan 2018 15:32:33 +0000 (16:32 +0100)]
arm64: zynqmp: Sync alignment with mainline
Sync pcie and lpd_dma nodes with mainline version.
Incorrect locations are causing diff in statistics that's why
synchronizations are needed.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Heinrich Schuchardt [Fri, 6 Apr 2018 13:36:31 +0000 (15:36 +0200)]
efi_loader: correctly set the machine type in the PE header
The portable executable header has a field describing the machine type.
The machine type should match the binary. So on i386 we should use
IMAGE_FILE_MACHINE_I386 and on x86_64 we should use
IMAGE_FILE_MACHINE_AMD64. The actual value is issued by the objcopy
command invoked in scripts/Makefile.lib in depdendence of the value of
EFI_TARGET.
The value is used both for EFI_STUB and for EFI_LOADER.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Wed, 4 Apr 2018 07:22:03 +0000 (09:22 +0200)]
MAINTAINERS: ZYNQMP: correct entries
Replace references to non-existent file.
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 13 Mar 2018 10:50:22 +0000 (11:50 +0100)]
MAINTAINERS: Fix zynqmp clock driver path
Fix c&p error from Zynq.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 23 Feb 2018 12:39:37 +0000 (13:39 +0100)]
arm: zynq: Handle ENXIO error return value properly
zynq_clk_get_rate() is also returning ENXIO which is not handled now.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Anton Gerasimov [Sat, 24 Mar 2018 17:32:00 +0000 (18:32 +0100)]
ARM: dts: zynq: Rename dts for Z-turn board
Makes naming in line with other Zynq boards.
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Anton Gerasimov [Sat, 24 Mar 2018 17:31:59 +0000 (18:31 +0100)]
ARM: dts: zynq: Update dts for Z-turn board
Delete devices implemented in PL, stylistic changes.
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Alex Kiernan [Sun, 1 Apr 2018 16:37:54 +0000 (16:37 +0000)]
Cleanup CONFIG_VERSION_VARIABLE migration
CONFIG_VERSION_VARIABLE had already been mostly migrated to Kconfig,
but two headers still referenced it. Also set defaults so that
most of the defconfigs inherit the default rather than needing it
to be set explicitly.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Alex Kiernan [Sun, 1 Apr 2018 16:37:53 +0000 (16:37 +0000)]
Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
Alex Kiernan [Sun, 1 Apr 2018 09:22:38 +0000 (09:22 +0000)]
net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.
This fixes failures such as:
board/ti/am335x/built-in.o: In function `board_late_init':
board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'
which caters for use cases such as:
commit
f411b5cca48f ("board: am335x: Always set eth/eth1addr environment
variable")
when Ethernet is required in Linux, but not U-Boot.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Alex Kiernan [Sun, 1 Apr 2018 09:22:37 +0000 (09:22 +0000)]
ti: am335x: Fix build when networking is disabled
When compiling without CONFIG_CLOCK_SYNTHESIZER (which is implied by
CONFIG_DRIVER_TI_CPSW for am335x_evm), exclude the network setup for
AM335x-ICEv2 to avoid link time failures:
board/ti/am335x/board.c:683: undefined reference to `setup_clock_synthesizer'
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Alex Kiernan [Sun, 1 Apr 2018 09:22:36 +0000 (09:22 +0000)]
usb: gadget: USB_ETHER requires network support
In order to compile the USB Ethernet gadget support we require that NET
is enabled, add that dependency here.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Alex Kiernan [Sun, 1 Apr 2018 09:22:35 +0000 (09:22 +0000)]
ti: am335x: Fix bootargs when building without NET
If DHCP/PXE commands are disabled then the compilation fails due to
bootargs attempting to use them:
include/config_distro_bootcmd.h:319:2: error: expected ‘}’ before ‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’
Ensure that if the command aren't enabled, we don't try and use them.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Alex Kiernan [Sun, 1 Apr 2018 09:22:34 +0000 (09:22 +0000)]
Migrate CONFIG_DRIVER_TI_CPSW to Kconfig
This converts CONFIG_DRIVER_TI_CPSW to Kconfig
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Mario Six [Wed, 28 Mar 2018 12:38:20 +0000 (14:38 +0200)]
treewide: Convert CONFIG_HOSTNAME to a string option
CONFIG_HOSTNAME is defined as a "plain" preprocessor string, but every
use is couched by __stringify(...).
Hence, convert it to a proper string option.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:38:19 +0000 (14:38 +0200)]
treewide: Migrate CONFIG_FSL_ESDHC to Kconfig
Migrate the CONFIG_FSL_ESDHC option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:38:18 +0000 (14:38 +0200)]
treewide: Migrate CONFIG_TSEC_ENET to Kconfig
Migrate the CONFIG_TSEC_ENET option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:38:17 +0000 (14:38 +0200)]
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig
Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
[trini: Re-run migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
Mario Six [Wed, 28 Mar 2018 12:38:16 +0000 (14:38 +0200)]
treewide: Migrate CONFIG_LAST_STAGE_INIT to Kconfig
Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:38:15 +0000 (14:38 +0200)]
treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to Kconfig
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:38:14 +0000 (14:38 +0200)]
treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig
Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
[trini: Re-run migration after also including CMD_MEMTEST]
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 8 Apr 2018 00:27:54 +0000 (20:27 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 7 Apr 2018 17:11:01 +0000 (13:11 -0400)]
configs: Finish migration of CONFIG_ATMEL_SPI
With the previous temporary reverts, we need to re-complete the
migration of CONFIG_ATMEL_SPI here now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 7 Apr 2018 13:15:50 +0000 (09:15 -0400)]
Revert "spi: atmel: Drop non-dm code"
As we aren't quite able to convert some platforms with a very small size
limit in SPL yet, we need to revert this for now.
This reverts commit
7b0947787358c6b277431d6b76ce043d8bec641d.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 7 Apr 2018 13:15:06 +0000 (09:15 -0400)]
Revert "spi: atmel: Drop atmel_spi.h"
As we aren't quite able to convert some platforms with a very small size
limit in SPL yet, we need to revert this for now.
This reverts commit
37434db29be495ef41f204a97b8bf13b1418f97d.
Signed-off-by: Tom Rini <trini@konsulko.com>
Mario Six [Wed, 28 Mar 2018 12:39:18 +0000 (14:39 +0200)]
cmd: Add command for calculating binary operations
This patch adds a command that enables the calculation of bit operations
(AND, OR, XOR) on binary data from the command line. Memory locations as
well as the contents of environment variables are eligible as sources
and destination of the binary data used in the operations.
The possible applications are manifold: Setting specific bits in
registers using the regular read-OR-write pattern, masking out bits in
bit values, implementation of simple OTP encryption using the XOR
operation, etc.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:39:10 +0000 (14:39 +0200)]
cmd: ximg: Respect cache line size for flushing
Make sure that the cache line size if respected when flushing the cache.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Wed, 28 Mar 2018 12:39:01 +0000 (14:39 +0200)]
gpio: uclass: Fix debug string
A debug string still has the old name of a function being called; update
it.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Wed, 28 Mar 2018 10:57:54 +0000 (12:57 +0200)]
watchdog: Fix Kconfig alignment for WDT_SANDBOX
Fix Kconfig alignment which should be <tab><space><space>.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Mon, 26 Mar 2018 14:31:27 +0000 (16:31 +0200)]
image: fit: Show information about OS type in firwmare case too
SPL ATF implementation requires FIT image with partitions where the one
is Firmware/ATF and another one Firmware/U-Boot. OS field is used for
recording that difference that's why make sense to show values there for
Firmware types.
For example:
Image 0 (atf)
Description: ATF bl31.bin
Created: Mon Mar 26 15:58:14 2018
Type: Firmware
Compression: uncompressed
Data Size: 51152 Bytes = 49.95 KiB = 0.05 MiB
Architecture: ARM
OS: ARM Trusted Firmware
Load Address: 0xfffe0000
Hash algo: md5
Hash value:
36a4212bbb698126bf5a248f0f4b5336
Image 1 (uboot)
Description: u-boot.bin
Created: Mon Mar 26 15:58:14 2018
Type: Firmware
Compression: uncompressed
Data Size: 761216 Bytes = 743.38 KiB = 0.73 MiB
Architecture: ARM
OS: U-Boot
Load Address: 0x08000000
Hash algo: md5
Hash value:
f22960fe429be72296dc8dc59a47d566
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Michal Simek [Mon, 26 Mar 2018 14:31:26 +0000 (16:31 +0200)]
image: fit: Show firmware configuration property if present
SPL ATF support requires to have firmware property which should be also
listed by mkimage -l when images is created.
The patch is also using this macro in spl_fit to match keyword.
When image is created:
Default Configuration: 'config'
Configuration 0 (config)
Description: ATF with full u-boot
Kernel: unavailable
Firmware: atf
FDT: dtb
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Vignesh R [Mon, 26 Mar 2018 07:57:03 +0000 (13:27 +0530)]
configs: am43xx_evm_qspiboot_defconfig: Move to DM
Move am43xx_evm_qspiboot_defconfig to DM. This is required as SPI core
and TI QSPI driver no longer supports non DM interfaces.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Vignesh R [Mon, 26 Mar 2018 07:57:02 +0000 (13:27 +0530)]
ARM: dts: Add new "generic" am4372 device tree file.
With U-boot runtime board detect for DTB selection a "default" dtb needs
to be created. This will be used temporarily until the "proper" dtb is
selected.
Also, add -u-boot.dtsi for AM437x SK and IDK to enable I2C for
board detection via DM_I2C.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Vignesh R [Mon, 26 Mar 2018 07:57:01 +0000 (13:27 +0530)]
board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in U-boot
AM437x QSPI boot is a single stage boot and hence needs runtime DTB
selection to support AM437x-SK and AM437x-IDK with DM enabled. This is
required to move am43xx_evm_qspiboot_defconfig to use DM/DT.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>