Thadeu Lima de Souza Cascardo [Tue, 7 Mar 2023 17:37:07 +0000 (14:37 -0300)]
net: avoid double iput when sock_alloc_file fails
commit
649c15c7691e9b13cbe9bf6c65c365350e056067 upstream.
When sock_alloc_file fails to allocate a file, it will call sock_release.
__sys_socket_file should then not call sock_release again, otherwise there
will be a double free.
[ 89.319884] ------------[ cut here ]------------
[ 89.320286] kernel BUG at fs/inode.c:1764!
[ 89.320656] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 89.321051] CPU: 7 PID: 125 Comm: iou-sqp-124 Not tainted 6.2.0+ #361
[ 89.321535] RIP: 0010:iput+0x1ff/0x240
[ 89.321808] Code: d1 83 e1 03 48 83 f9 02 75 09 48 81 fa 00 10 00 00 77 05 83 e2 01 75 1f 4c 89 ef e8 fb d2 ba 00 e9 80 fe ff ff c3 cc cc cc cc <0f> 0b 0f 0b e9 d0 fe ff ff 0f 0b eb 8d 49 8d b4 24 08 01 00 00 48
[ 89.322760] RSP: 0018:
ffffbdd60068bd50 EFLAGS:
00010202
[ 89.323036] RAX:
0000000000000000 RBX:
ffff9d7ad3cacac0 RCX:
0000000000001107
[ 89.323412] RDX:
000000000003af00 RSI:
0000000000000000 RDI:
ffff9d7ad3cacb40
[ 89.323785] RBP:
ffffbdd60068bd68 R08:
ffffffffffffffff R09:
ffffffffab606438
[ 89.324157] R10:
ffffffffacb3dfa0 R11:
6465686361657256 R12:
ffff9d7ad3cacb40
[ 89.324529] R13:
0000000080000001 R14:
0000000080000001 R15:
0000000000000002
[ 89.324904] FS:
00007f7b28516740(0000) GS:
ffff9d7aeb1c0000(0000) knlGS:
0000000000000000
[ 89.325328] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 89.325629] CR2:
00007f0af52e96c0 CR3:
0000000002a02006 CR4:
0000000000770ee0
[ 89.326004] PKRU:
55555554
[ 89.326161] Call Trace:
[ 89.326298] <TASK>
[ 89.326419] __sock_release+0xb5/0xc0
[ 89.326632] __sys_socket_file+0xb2/0xd0
[ 89.326844] io_socket+0x88/0x100
[ 89.327039] ? io_issue_sqe+0x6a/0x430
[ 89.327258] io_issue_sqe+0x67/0x430
[ 89.327450] io_submit_sqes+0x1fe/0x670
[ 89.327661] io_sq_thread+0x2e6/0x530
[ 89.327859] ? __pfx_autoremove_wake_function+0x10/0x10
[ 89.328145] ? __pfx_io_sq_thread+0x10/0x10
[ 89.328367] ret_from_fork+0x29/0x50
[ 89.328576] RIP: 0033:0x0
[ 89.328732] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 89.329073] RSP: 002b:
0000000000000000 EFLAGS:
00000202 ORIG_RAX:
00000000000001a9
[ 89.329477] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
00007f7b28637a3d
[ 89.329845] RDX:
00007fff4e4318a8 RSI:
00007fff4e4318b0 RDI:
0000000000000400
[ 89.330216] RBP:
00007fff4e431830 R08:
00007fff4e431711 R09:
00007fff4e4318b0
[ 89.330584] R10:
0000000000000000 R11:
0000000000000202 R12:
00007fff4e441b38
[ 89.330950] R13:
0000563835e3e725 R14:
0000563835e40d10 R15:
00007f7b28784040
[ 89.331318] </TASK>
[ 89.331441] Modules linked in:
[ 89.331617] ---[ end trace
0000000000000000 ]---
Fixes: da214a475f8b ("net: add __sys_socket_file()")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230307173707.468744-1-cascardo@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Goncharov [Mon, 5 Dec 2022 21:48:19 +0000 (16:48 -0500)]
kbuild: Port silent mode detection to future gnu make.
commit
4bf73588165ba7d32131a043775557a54b6e1db5 upstream.
Port silent mode detection to the future (post make-4.4) versions of gnu make.
Makefile contains the following piece of make code to detect if option -s is
specified on the command line.
ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
This code is executed by make at parse time and assumes that MAKEFLAGS
does not contain command line variable definitions.
Currently if the user defines a=s on the command line, then at build only
time MAKEFLAGS contains " -- a=s".
However, starting with commit
dc2d963989b96161472b2cd38cef5d1f4851ea34
MAKEFLAGS contains command line definitions at both parse time and
build time.
This '-s' detection code then confuses a command line variable
definition which contains letter 's' with option -s.
$ # old make
$ make net/wireless/ocb.o a=s
CALL scripts/checksyscalls.sh
DESCEND objtool
$ # this a new make which defines makeflags at parse time
$ ~/src/gmake/make/l64/make net/wireless/ocb.o a=s
$
We can see here that the letter 's' from 'a=s' was confused with -s.
This patch checks for presence of -s using a method recommended by the
make manual here
https://www.gnu.org/software/make/manual/make.html#Testing-Flags.
Link: https://lists.gnu.org/archive/html/bug-make/2022-11/msg00190.html
Reported-by: Jan Palus <jpalus+gnu@fastmail.com>
Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabriel Krisman Bertazi [Tue, 15 Nov 2022 22:45:53 +0000 (17:45 -0500)]
sbitmap: Try each queue to wake up at least one waiter
commit
26edb30dd1c0c9be11fa676b4f330ada7b794ba6 upstream.
Jan reported the new algorithm as merged might be problematic if the
queue being awaken becomes empty between the waitqueue_active inside
sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will
not wake up any waiter and we loose too many wake ups. In order to
guarantee progress, we need to wake up at least one waiter here, if
there are any. This now requires trying to wake up from every queue.
Instead of walking through all the queues with sbq_wake_ptr, this call
moves the wake up inside that function. In a previous version of the
patch, I found that updating wake_index several times when walking
through queues had a measurable overhead. This ensures we only update
it once, at the end.
Fixes: 4f8126bb2308 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabriel Krisman Bertazi [Tue, 15 Nov 2022 22:45:52 +0000 (17:45 -0500)]
wait: Return number of exclusive waiters awaken
commit
ee7dc86b6d3e3b86c2c487f713eda657850de238 upstream.
Sbitmap code will need to know how many waiters were actually woken for
its batched wakeups implementation. Return the number of woken
exclusive waiters from __wake_up() to facilitate that.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabriel Krisman Bertazi [Tue, 15 Nov 2022 22:45:51 +0000 (17:45 -0500)]
sbitmap: Advance the queue index before waking up a queue
commit
976570b4ecd30d3ec6e1b0910da8e5edc591f2b6 upstream.
When a queue is awaken, the wake_index written by sbq_wake_ptr currently
keeps pointing to the same queue. On the next wake up, it will thus
retry the same queue, which is unfair to other queues, and can lead to
starvation. This patch, moves the index update to happen before the
queue is returned, such that it will now try a different queue first on
the next wake up, improving fairness.
Fixes: 4f8126bb2308 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221115224553.23594-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pankaj Raghav [Fri, 17 Feb 2023 12:14:44 +0000 (17:44 +0530)]
brd: use radix_tree_maybe_preload instead of radix_tree_preload
commit
0aa2988e4fd23c0c8b33999d7b47dfbc5e6bf24b upstream.
Unconditionally calling radix_tree_preload_end() results in a OOPS
message as the preload is only conditionally called for
gfpflags_allow_blocking().
[ 20.267323] BUG: using smp_processor_id() in preemptible [
00000000] code: fio/416
[ 20.267837] caller is brd_insert_page.part.0+0xbe/0x190 [brd]
[ 20.269436] Call Trace:
[ 20.269598] <TASK>
[ 20.269742] dump_stack_lvl+0x32/0x50
[ 20.269982] check_preemption_disabled+0xd1/0xe0
[ 20.270289] brd_insert_page.part.0+0xbe/0x190 [brd]
[ 20.270664] brd_submit_bio+0x33f/0xf40 [brd]
Use radix_tree_maybe_preload() which does preload only if
gfpflags_allow_blocking() is true but also takes the lock. Therefore,
unconditionally calling radix_tree_preload_end() should not create any
issues and the message disappears.
Fixes: 6ded703c56c2 ("brd: check for REQ_NOWAIT and set correct page allocation mask")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230217121442.33914-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Schmidt [Fri, 24 Feb 2023 00:41:45 +0000 (01:41 +0100)]
qede: avoid uninitialized entries in coal_entry array
commit
aaa3c08ee0653beaa649d4adfb27ad562641cfd8 upstream.
Even after commit
908d4bb7c54c ("qede: fix interrupt coalescing
configuration"), some entries of the coal_entry array may theoretically
be used uninitialized:
1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for
coal_entry. The initial allocation uses kcalloc, so everything is
initialized.
2. The user sets a small number of queues (ethtool -L).
coal_entry is reallocated for the actual small number of queues.
3. The user sets a bigger number of queues.
coal_entry is reallocated bigger. The added entries are not
necessarily initialized.
In practice, the reallocations will actually keep using the originally
allocated region of memory, but we should not rely on it.
The reallocation is unnecessary. coal_entry can always have
QEDE_MAX_RSS_CNT entries.
Fixes: 908d4bb7c54c ("qede: fix interrupt coalescing configuration")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Nacked-by: Manish Chopra <manishc@marvell.com>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Wed, 4 Jan 2023 10:05:17 +0000 (12:05 +0200)]
drm/edid: fix parsing of 3D modes from HDMI VSDB
commit
72794d16bd535a984e6653a18f5862405b49b5f9 upstream.
Commit
537d9ed2f6c1 ("drm/edid: convert add_cea_modes() to use cea db
iter") inadvertently moved the do_hdmi_vsdb_modes() call within the db
iteration loop, always passing NULL as the CTA VDB to
do_hdmi_vsdb_modes(), skipping a lot of stereo modes.
Move the call back outside of the loop.
This does mean only one CTA VDB and HDMI VSDB combination will be
handled, but it's an unlikely scenario to have more than one of either
block, and it was not accounted for before the regression either.
Fixes: 537d9ed2f6c1 ("drm/edid: convert add_cea_modes() to use cea db iter")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf159b8816191ed595a3cb954acaf189c4528cc7.1672826282.git.jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Wed, 4 Jan 2023 10:05:16 +0000 (12:05 +0200)]
drm/edid: fix AVI infoframe aspect ratio handling
commit
1cbc1f0d324ba6c4d1b10ac6362b5e0b029f63d5 upstream.
We try to avoid sending VICs defined in the later specs in AVI
infoframes to sinks that conform to the earlier specs, to not upset
them, and use 0 for the VIC instead. However, we do this detection and
conversion to 0 too early, as we'll need the actual VIC to figure out
the aspect ratio.
In particular, for a mode with 64:27 aspect ratio, 0 for VIC fails the
AVI infoframe generation altogether with -EINVAL.
Separate the VIC lookup from the "filtering", and postpone the
filtering, to use the proper VIC for aspect ratio handling, and the 0
VIC for the infoframe video code as needed.
Reported-by: William Tseng <william.tseng@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6153
References: https://lore.kernel.org/r/
20220920062316.43162-1-william.tseng@intel.com
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3e78cc6d01ed237f71ad0038826b08d83d75eef.1672826282.git.jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noralf Trønnes [Wed, 30 Nov 2022 19:26:49 +0000 (20:26 +0100)]
drm/gud: Fix UBSAN warning
commit
951df98024f7272f85df5044eca7374f5b5b24ef upstream.
UBSAN complains about invalid value for bool:
[ 101.165172] [drm] Initialized gud 1.0.0
20200422 for 2-3.2:1.0 on minor 1
[ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device
[ 101.213426] usbcore: registered new interface driver gud
[ 101.989431] ================================================================================
[ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9
[ 101.989447] load of value 121 is not a valid value for type '_Bool'
[ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3
[ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018
[ 101.989459] Workqueue: events_long gud_flush_work [gud]
[ 101.989471] Call Trace:
[ 101.989474] <TASK>
[ 101.989479] dump_stack_lvl+0x49/0x5f
[ 101.989488] dump_stack+0x10/0x12
[ 101.989493] ubsan_epilogue+0x9/0x3b
[ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49
[ 101.989504] dma_buf_vmap.cold+0x38/0x3d
[ 101.989511] ? find_busiest_group+0x48/0x300
[ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper]
[ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper]
[ 101.989535] drm_gem_vmap+0x26/0x60 [drm]
[ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper]
[ 101.989630] gud_prep_flush+0xc1/0x710 [gud]
[ 101.989639] ? _raw_spin_lock+0x17/0x40
[ 101.989648] gud_flush_work+0x1e0/0x430 [gud]
[ 101.989653] ? __switch_to+0x11d/0x470
[ 101.989664] process_one_work+0x21f/0x3f0
[ 101.989673] worker_thread+0x200/0x3e0
[ 101.989679] ? rescuer_thread+0x390/0x390
[ 101.989684] kthread+0xfd/0x130
[ 101.989690] ? kthread_complete_and_exit+0x20/0x20
[ 101.989696] ret_from_fork+0x22/0x30
[ 101.989706] </TASK>
[ 101.989708] ================================================================================
The source of this warning is in iosys_map_clear() called from
dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The
iosys_map variables are allocated uninitialized on the stack leading to
->is_iomem having all kinds of values and not only 0/1.
Fix this by zeroing the iosys_map variables.
Fixes: 40e1a70b4aed ("drm: Add GUD USB Display driver")
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-1-435037990a83@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Harrison [Thu, 16 Feb 2023 01:11:01 +0000 (17:11 -0800)]
drm/i915: Don't use BAR mappings for ring buffers with LLC
commit
85636167e3206c3fbd52254fc432991cc4e90194 upstream.
Direction from hardware is that ring buffers should never be mapped
via the BAR on systems with LLC. There are too many caching pitfalls
due to the way BAR accesses are routed. So it is safest to just not
use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com
(cherry picked from commit
65c08339db1ada87afd6cfe7db8e60bb4851d919)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Harrison [Thu, 16 Feb 2023 01:11:00 +0000 (17:11 -0800)]
drm/i915: Don't use stolen memory for ring buffers with LLC
commit
690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream.
Direction from hardware is that stolen memory should never be used for
ring buffer allocations on platforms with LLC. There are too many
caching pitfalls due to the way stolen memory accesses are routed. So
it is safest to just not use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com
(cherry picked from commit
f54c1f6c697c4297f7ed94283c184acc338a5cf8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hawrylak [Sun, 19 Feb 2023 05:02:00 +0000 (16:02 +1100)]
drm/radeon: Fix eDP for single-display iMac11,2
commit
05eacc198c68cbb35a7281ce4011f8899ee1cfb8 upstream.
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit
564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mavroudis Chatzilaridis [Wed, 1 Feb 2023 18:51:25 +0000 (18:51 +0000)]
drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv
commit
5e438bf7f9a1705ebcae5fa89cdbfbc6932a7871 upstream.
This laptop uses inverted backlight PWM. Thus, without this quirk,
backlight brightness decreases as the brightness value increases and
vice versa.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8013
Cc: stable@vger.kernel.org
Signed-off-by: Mavroudis Chatzilaridis <mavchatz@protonmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201184947.8835-1-mavchatz@protonmail.com
(cherry picked from commit
83e7d6fd330d413cb2064e680ffea91b0512a520)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Mon, 20 Feb 2023 05:04:04 +0000 (23:04 -0600)]
drm/amd: Fix initialization for nbio 7.5.1
commit
65a24000808f70ac69bd2a96381fa0c7341f20c0 upstream.
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Sistare [Tue, 31 Jan 2023 16:58:06 +0000 (08:58 -0800)]
vfio/type1: restore locked_vm
commit
90fdd158a695d70403163f9a0e4efc5b20f3fd3e upstream.
When a vfio container is preserved across exec or fork-exec, the new
task's mm has a locked_vm count of 0. After a dma vaddr is updated using
VFIO_DMA_MAP_FLAG_VADDR, locked_vm remains 0, and the pinned memory does
not count against the task's RLIMIT_MEMLOCK.
To restore the correct locked_vm count, when VFIO_DMA_MAP_FLAG_VADDR is
used and the dma's mm has changed, add the dma's locked_vm count to
the new mm->locked_vm, subject to the rlimit, and subtract it from the
old mm->locked_vm.
Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Sistare [Tue, 31 Jan 2023 16:58:05 +0000 (08:58 -0800)]
vfio/type1: track locked_vm per dma
commit
18e292705ba21cc9b3227b9ad5b1c28973605ee5 upstream.
Track locked_vm per dma struct, and create a new subroutine, both for use
in a subsequent patch. No functional change.
Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-4-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Sistare [Tue, 31 Jan 2023 16:58:04 +0000 (08:58 -0800)]
vfio/type1: prevent underflow of locked_vm via exec()
commit
046eca5018f8a5dd1dc2cedf87fb5843b9ea3026 upstream.
When a vfio container is preserved across exec, the task does not change,
but it gets a new mm with locked_vm=0, and loses the count from existing
dma mappings. If the user later unmaps a dma mapping, locked_vm underflows
to a large unsigned value, and a subsequent dma map request fails with
ENOMEM in __account_locked_vm.
To avoid underflow, grab and save the mm at the time a dma is mapped.
Use that mm when adjusting locked_vm, rather than re-acquiring the saved
task's mm, which may have changed. If the saved mm is dead, do nothing.
locked_vm is incremented for existing mappings in a subsequent patch.
Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Sistare [Tue, 31 Jan 2023 16:58:03 +0000 (08:58 -0800)]
vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
commit
ef3a3f6a294ba65fd906a291553935881796f8a5 upstream.
Disable the VFIO_UPDATE_VADDR capability if mediated devices are present.
Their kernel threads could be blocked indefinitely by a misbehaving
userland while trying to pin/unpin pages while vaddrs are being updated.
Do not allow groups to be added to the container while vaddr's are invalid,
so we never need to block user threads from pinning, and can delete the
vaddr-waiting code in a subsequent patch.
Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jacob Pan [Thu, 16 Feb 2023 13:08:15 +0000 (21:08 +0800)]
iommu/vt-d: Fix PASID directory pointer coherency
commit
194b3348bdbb7db65375c72f3f774aee4cc6614e upstream.
On platforms that do not support IOMMU Extended capability bit 0
Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing
any translation structures. IOMMU access goes only directly to
memory. Intel IOMMU code was missing a flush for the PASID table
directory that resulted in the unrecoverable fault as shown below.
This patch adds clflush calls whenever allocating and updating
a PASID table directory to ensure cache coherency.
On the reverse direction, there's no need to clflush the PASID directory
pointer when we deactivate a context entry in that IOMMU hardware will
not see the old PASID directory pointer after we clear the context entry.
PASID directory entries are also never freed once allocated.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read NO_PASID] Request device [00:0d.2] fault addr 0x1026a4000
[fault reason 0x51] SM: Present bit in Directory Entry is clear
DMAR: Dump dmar1 table entries for IOVA 0x1026a4000
DMAR: scalable mode root entry: hi 0x0000000102448001, low 0x0000000101b3e001
DMAR: context entry: hi 0x0000000000000000, low 0x0000000101b4d401
DMAR: pasid dir entry: 0x0000000101b4e001
DMAR: pasid table entry[0]: 0x0000000000000109
DMAR: pasid table entry[1]: 0x0000000000000001
DMAR: pasid table entry[2]: 0x0000000000000000
DMAR: pasid table entry[3]: 0x0000000000000000
DMAR: pasid table entry[4]: 0x0000000000000000
DMAR: pasid table entry[5]: 0x0000000000000000
DMAR: pasid table entry[6]: 0x0000000000000000
DMAR: pasid table entry[7]: 0x0000000000000000
DMAR: PTE not present at level 4
Cc: <stable@vger.kernel.org>
Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209212843.1788125-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jacob Pan [Thu, 16 Feb 2023 13:08:14 +0000 (21:08 +0800)]
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
commit
16a75bbe480c3598b3af57a2504ea89b1e32c3ac upstream.
Intel IOMMU driver implements IOTLB flush queue with domain selective
or PASID selective invalidations. In this case there's no need to track
IOVA page range and sync IOTLBs, which may cause significant performance
hit.
This patch adds a check to avoid IOVA gather page and IOTLB sync for
the lazy path.
The performance difference on Sapphire Rapids 100Gb NIC is improved by
the following (as measured by iperf send):
w/o this fix~48 Gbits/s. with this fix ~54 Gbits/s
Cc: <stable@vger.kernel.org>
Fixes: 2a2b8eaa5b25 ("iommu: Handle freelists when using deferred flushing in iommu drivers")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209175330.1783556-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Wed, 28 Dec 2022 16:17:04 +0000 (21:47 +0530)]
bus: mhi: ep: Save channel state locally during suspend and resume
commit
8a1c24bb908f9ecbc4be0fea014df67d43161551 upstream.
During suspend and resume, the channel state needs to be saved locally.
Otherwise, the endpoint may access the channels while they were being
suspended and causing access violations.
Fix it by saving the channel state locally during suspend and resume.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com)
Link: https://lore.kernel.org/r/20221228161704.255268-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Wed, 28 Dec 2022 16:17:03 +0000 (21:47 +0530)]
bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
commit
8d6a1fea53864cd9545741f48f4ae4df804db557 upstream.
There is a good chance that while the channel ring gets processed, the STOP
or RESET command for the channel might be received from the MHI host. In
those cases, the entire channel ring processing needs to be protected by
chan->lock to prevent the race where the corresponding channel ring might
be reset.
While at it, let's also add a sanity check to make sure that the ring is
started before processing it. Because, if the STOP/RESET command gets
processed while mhi_ep_ch_ring_worker() waited for chan->lock, the ring
would've been reset.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 03c0bb8ec983 ("bus: mhi: ep: Add support for processing channel rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Wed, 28 Dec 2022 16:17:01 +0000 (21:47 +0530)]
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
commit
e6cebcc27519dcf1652e604c73b9fd4f416987c0 upstream.
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e827569062a8 ("bus: mhi: ep: Add support for processing command rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Sun, 15 Jan 2023 08:20:33 +0000 (09:20 +0100)]
PCI/DPC: Await readiness of secondary bus after reset
commit
53b54ad074de1896f8b021615f65b27f557ce874 upstream.
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus
Reset, but not after a DPC-induced Hot Reset.
As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not
observed and devices on the secondary bus may be accessed before
they're ready.
One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a
PCIe switch whose upstream port is not immediately ready after reset.
Because its config space is restored too early, it remains in
D0uninitialized, its subordinate devices remain inaccessible and DPC
recovery fails with messages such as:
i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible)
intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible)
pcieport 0000:89:02.0: AER: device recovery failed
Fix it.
Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Sat, 28 Jan 2023 01:39:51 +0000 (10:39 +0900)]
PCI: Avoid FLR for AMD FCH AHCI adapters
commit
63ba51db24ed1b8f8088a897290eb6c036c5435d upstream.
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
ata4: softreset failed (1st FIS failed)
...
ata4.00: qc timeout after 5000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:
echo "bus" > /sys/bus/pci/devices/<ID>/reset_method
gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.
Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.
Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Fri, 20 Jan 2023 09:19:02 +0000 (10:19 +0100)]
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
commit
74ff8864cc842be994853095dba6db48e716400a upstream.
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: a6bd101b8f84 ("PCI: Unify device inaccessible")
Link: https://lore.kernel.org/r/3dc88ea82bdc0e37d9000e413d5ebce481cbd629.1674205689.git.lukas@wunner.de
Reported-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Sun, 15 Jan 2023 08:20:32 +0000 (09:20 +0100)]
PCI: Unify delay handling for reset and resume
commit
ac91e6980563ed53afadd925fa6585ffd2bc4a2c upstream.
Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait
for devices on the secondary bus to become accessible after reset:
Although it does call pci_dev_wait(), it erroneously passes the bridge's
pci_dev rather than that of a child. The bridge of course is always
accessible while its secondary bus is reset, so pci_dev_wait() returns
immediately.
Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait()
function which is called from pci_bridge_secondary_bus_reset():
https://lore.kernel.org/linux-pci/
20220523171517.32407-1-windy.bi.enflame@gmail.com/
However we already have pci_bridge_wait_for_secondary_bus() which does
almost exactly what we need. So far it's only called on resume from
D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8).
Re-using it for Secondary Bus Resets is a leaner and more rational
approach than introducing a new function.
That only requires a few minor tweaks:
- Amend pci_bridge_wait_for_secondary_bus() to await accessibility of
the first device on the secondary bus by calling pci_dev_wait() after
performing the prescribed delays. pci_dev_wait() needs two parameters,
a reset reason and a timeout, which callers must now pass to
pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume
(PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit
821cdad5c46c ("PCI:
Wait up to 60 seconds for device to become ready after FLR")).
Introduce a PCI_RESET_WAIT macro for the 1 sec timeout.
- Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or
-ENOTTY on error for consumption by pci_bridge_secondary_bus_reset().
- Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which
is now performed by pci_bridge_wait_for_secondary_bus(). A static
delay this long is only necessary for Conventional PCI, so modern
PCIe systems benefit from shorter reset times as a side effect.
Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset")
Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de
Reported-by: Sheng Bi <windy.bi.enflame@gmail.com>
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Sun, 15 Jan 2023 08:20:31 +0000 (09:20 +0100)]
PCI/PM: Observe reset delay irrespective of bridge_d3
commit
8ef0217227b42e2c34a18de316cee3da16c9bf1e upstream.
If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.
The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:
pci_pm_resume_noirq()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: ad9001f2f411 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Nikolaus Schaller [Sun, 29 Jan 2023 18:57:04 +0000 (19:57 +0100)]
MIPS: DTS: CI20: fix otg power gpio
commit
0cb4228f6cc9ed0ca2be0d9ddf29168a8e3a3905 upstream.
According to schematics it is PF15 and not PF14 (MIC_SW_EN).
Seems as if it was hidden and not noticed during testing since
there is no sound DT node.
Fixes: 158c774d3c64 ("MIPS: Ingenic: Add missing nodes for Ingenic SoCs and boards.")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guo Ren [Thu, 12 Jan 2023 09:05:59 +0000 (04:05 -0500)]
riscv: ftrace: Reduce the detour code size to half
commit
6724a76cff85ee271bbbff42ac527e4643b2ec52 upstream.
Use a temporary register to reduce the size of detour code from 16 bytes to
8 bytes. The previous implementation is from 'commit
afc76b8b8011 ("riscv:
Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'.
Before the patch:
<func_prolog>:
0: REG_S ra, -SZREG(sp)
4: auipc ra, ?
8: jalr ?(ra)
12: REG_L ra, -SZREG(sp)
(func_boddy)
After the patch:
<func_prolog>:
0: auipc t0, ?
4: jalr t0, ?(t0)
(func_boddy)
This patch not just reduces the size of detour code, but also fixes an
important issue:
An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can
actually change the instruction pointer, e.g. to "replace" the given
kernel function with a new one, which is needed for livepatching, etc.
In this case, the trampoline (ftrace_regs_caller) would not return to
<func_prolog+12> but would rather jump to the new function. So, "REG_L
ra, -SZREG(sp)" would not run and the original return address would not
be restored. The kernel is likely to hang or crash as a result.
This can be easily demonstrated if one tries to "replace", say,
cmdline_proc_show() with a new function with the same signature using
instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace
callback.
Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/
Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/
Co-developed-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20230112090603.1295340-4-guoren@kernel.org
Cc: stable@vger.kernel.org
Fixes: 10626c32e382 ("riscv/ftrace: Add basic support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guo Ren [Thu, 12 Jan 2023 09:05:58 +0000 (04:05 -0500)]
riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
commit
409c8fb20c66df7150e592747412438c04aeb11f upstream.
When CONFIG_RISCV_ISA_C=n, -fpatchable-function-entry=8 would generate
more nops than we expect. Because it treat nop opcode as 0x00000013
instead of 0x0001.
Dump of assembler code for function dw_pcie_free_msi:
0xffffffff806fce94 <+0>: sd ra,-8(sp)
0xffffffff806fce98 <+4>: auipc ra,0xff90f
0xffffffff806fce9c <+8>: jalr -684(ra) # 0xffffffff8000bbec
<ftrace_caller>
0xffffffff806fcea0 <+12>: ld ra,-8(sp)
0xffffffff806fcea4 <+16>: nop /* wasted */
0xffffffff806fcea8 <+20>: nop /* wasted */
0xffffffff806fceac <+24>: nop /* wasted */
0xffffffff806fceb0 <+28>: nop /* wasted */
0xffffffff806fceb4 <+0>: addi sp,sp,-48
0xffffffff806fceb8 <+4>: sd s0,32(sp)
0xffffffff806fcebc <+8>: sd s1,24(sp)
0xffffffff806fcec0 <+12>: sd s2,16(sp)
0xffffffff806fcec4 <+16>: sd s3,8(sp)
0xffffffff806fcec8 <+20>: sd ra,40(sp)
0xffffffff806fcecc <+24>: addi s0,sp,48
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230112090603.1295340-3-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Björn Töpel [Tue, 14 Feb 2023 16:25:15 +0000 (17:25 +0100)]
riscv, mm: Perform BPF exhandler fixup on page fault
commit
416721ff05fddc58ca531b6f069de250301de6e5 upstream.
Commit
21855cac82d3 ("riscv/mm: Prevent kernel module to access user
memory without uaccess routines") added early exits/deaths for page
faults stemming from accesses to user-space without using proper
uaccess routines (where sstatus.SUM is set).
Unfortunatly, this is too strict for some BPF programs, which relies
on BPF exhandler fixups. These BPF programs loads "BTF pointers". A
BTF pointers could either be a valid kernel pointer or NULL, but not a
userspace address.
Resolve the problem by calling the fixup handler in the early exit
path.
Fixes: 21855cac82d3 ("riscv/mm: Prevent kernel module to access user memory without uaccess routines")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230214162515.184827-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Chiu [Mon, 6 Feb 2023 09:04:40 +0000 (04:04 -0500)]
riscv: jump_label: Fixup unaligned arch_static_branch function
commit
9ddfc3cd806081ce1f6c9c2f988cbb031f35d28f upstream.
Runtime code patching must be done at a naturally aligned address, or we
may execute on a partial instruction.
We have encountered problems traced back to static jump functions during
the test. We switched the tracer randomly for every 1~5 seconds on a
dual-core QEMU setup and found the kernel sucking at a static branch
where it jumps to itself.
The reason is that the static branch was 2-byte but not 4-byte aligned.
Then, the kernel would patch the instruction, either J or NOP, with two
half-word stores if the machine does not have efficient unaligned
accesses. Thus, moments exist where half of the NOP mixes with the other
half of the J when transitioning the branch. In our particular case, on
a little-endian machine, the upper half of the NOP was mixed with the
lower part of the J when enabling the branch, resulting in a jump that
jumped to itself. Conversely, it would result in a HINT instruction when
disabling the branch, but it might not be observable.
ARM64 does not have this problem since all instructions must be 4-byte
aligned.
Fixes: ebc00dde8a97 ("riscv: Add jump-label implementation")
Link: https://lore.kernel.org/linux-riscv/20220913094252.3555240-6-andy.chiu@sifive.com/
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230206090440.1255001-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Matyukevich [Sun, 29 Jan 2023 21:18:18 +0000 (00:18 +0300)]
riscv: mm: fix regression due to update_mmu_cache change
commit
b49f700668fff7565b945dce823def79bff59bb0 upstream.
This is a partial revert of the commit
4bd1d80efb5a ("riscv: mm: notify
remote harts about mmu cache updates"). Original commit included two
loosely related changes serving the same purpose of fixing stale TLB
entries causing user-space application crash:
- introduce deferred per-ASID TLB flush for CPUs not running the task
- switch to per-ASID TLB flush on all CPUs running the task in update_mmu_cache
According to report and discussion in [1], the second part caused a
regression on Renesas RZ/Five SoC. For now restore the old behavior
of the update_mmu_cache.
[1] https://lore.kernel.org/linux-riscv/
20220829205219.283543-1-geomatsi@gmail.com/
Fixes: 4bd1d80efb5a ("riscv: mm: notify remote harts about mmu cache updates")
Reported-by: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: trailer, so that it can be parsed with git's trailer functionality?
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129211818.686557-1-geomatsi@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mattias Nissler [Wed, 15 Feb 2023 14:48:28 +0000 (14:48 +0000)]
riscv: Avoid enabling interrupts in die()
commit
130aee3fd9981297ff9354e5d5609cd59aafbbea upstream.
While working on something else, I noticed that the kernel would start
accepting interrupts again after crashing in an interrupt handler. Since
the kernel is already in inconsistent state, enabling interrupts is
dangerous and opens up risk of kernel state deteriorating further.
Interrupts do get enabled via what looks like an unintended side effect of
spin_unlock_irq, so switch to the more cautious
spin_lock_irqsave/spin_unlock_irqrestore instead.
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230215144828.3370316-1-mnissler@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conor Dooley [Fri, 10 Feb 2023 18:59:45 +0000 (18:59 +0000)]
RISC-V: add a spin_shadow_stack declaration
commit
eb9be8310c58c166f9fae3b71c0ad9d6741b4897 upstream.
The patchwork automation reported a sparse complaint that
spin_shadow_stack was not declared and should be static:
../arch/riscv/kernel/traps.c:335:15: warning: symbol 'spin_shadow_stack' was not declared. Should it be static?
However, this is used in entry.S and therefore shouldn't be static.
The same applies to the shadow_stack that this pseudo spinlock is
trying to protect, so do like its charge and add a declaration to
thread_info.h
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 7e1864332fbc ("riscv: fix race when vmap stack overflow")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230210185945.915806-1-conor@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Henzl [Thu, 2 Feb 2023 16:24:51 +0000 (17:24 +0100)]
scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
commit
578797f0c8cbc2e3ec5fc0dab87087b4c7073686 upstream.
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses]
Read of size 8 at addr
ffff88a10d32e5d8 by task rmmod/12013
When edev->components is zero, accessing edev->component[0] members is
wrong.
Link: https://lore.kernel.org/r/20230202162451.15346-5-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Henzl [Thu, 2 Feb 2023 16:24:50 +0000 (17:24 +0100)]
scsi: ses: Fix possible desc_ptr out-of-bounds accesses
commit
801ab13d50cf3d26170ee073ea8bb4eececb76ab upstream.
Sanitize possible desc_ptr out-of-bounds accesses in
ses_enclosure_data_process().
Link: https://lore.kernel.org/r/20230202162451.15346-4-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Henzl [Thu, 2 Feb 2023 16:24:49 +0000 (17:24 +0100)]
scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
commit
db95d4df71cb55506425b6e4a5f8d68e3a765b63 upstream.
Sanitize possible addl_desc_ptr out-of-bounds accesses in
ses_enclosure_data_process().
Link: https://lore.kernel.org/r/20230202162451.15346-3-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Henzl [Thu, 2 Feb 2023 16:24:48 +0000 (17:24 +0100)]
scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
commit
9b4f5028e493cb353a5c8f5c45073eeea0303abd upstream.
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses]
Read of size 1 at addr
ffff88a1b043a451 by task systemd-udevd/3271
Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we
expect the size to be sanitized before first access to addl_desc_ptr[1].
Make sure we don't walk beyond end of page.
Link: https://lore.kernel.org/r/20230202162451.15346-2-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Bottomley [Sat, 28 Nov 2020 23:27:21 +0000 (15:27 -0800)]
scsi: ses: Don't attach if enclosure has no components
commit
3fe97ff3d94934649abb0652028dd7296170c8d0 upstream.
An enclosure with no components can't usefully be operated by the driver
(since effectively it has nothing to manage), so report the problem and
don't attach. Not attaching also fixes an oops which could occur if the
driver tries to manage a zero component enclosure.
[mkp: Switched to KERN_WARNING since this scenario is common]
Link: https://lore.kernel.org/r/c5deac044ac409e32d9ad9968ce0dcbc996bfc7a.camel@linux.ibm.com
Cc: stable@vger.kernel.org
Reported-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saurav Kashyap [Mon, 19 Dec 2022 11:07:46 +0000 (03:07 -0800)]
scsi: qla2xxx: Remove increment of interface err cnt
commit
d676a9e3d9efb7e93df460bcf4c445496c16314f upstream.
Residual underrun is not an interface error, hence no need to increment
that count.
Fixes: dbf1f53cfd23 ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Mon, 19 Dec 2022 11:07:45 +0000 (03:07 -0800)]
scsi: qla2xxx: Fix erroneous link down
commit
3fbc74feb642deb688cc97f76d40b7287ddd4cb1 upstream.
If after an adapter reset the appearance of link is not recovered, the
devices are not rediscovered. This is result of a race condition between
adapter reset (abort_isp) and the topology scan. During adapter reset, the
ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter
reset. In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.
kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn
51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.
Allow adapter reset to complete before any scan can start.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Mon, 19 Dec 2022 11:07:44 +0000 (03:07 -0800)]
scsi: qla2xxx: Remove unintended flag clearing
commit
7e8a936a2d0f98dd6e5d05d4838affabe606cabc upstream.
FCF_ASYNC_SENT flag is used in session management. This flag is cleared in
task management path by accident. Remove unintended flag clearing.
Fixes: 388a49959ee4 ("scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arun Easi [Mon, 19 Dec 2022 11:07:40 +0000 (03:07 -0800)]
scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
commit
c75e6aef5039830cce5d4cf764dd204522f89e6b upstream.
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.
Fixes: c85ab7d9e27a ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreyas Deodhar [Mon, 19 Dec 2022 11:07:38 +0000 (03:07 -0800)]
scsi: qla2xxx: Check if port is online before sending ELS
commit
0c227dc22ca18856055983f27594feb2e0149965 upstream.
CT Ping and ELS cmds fail for NVMe targets. Check if port is online before
sending ELS instead of sending login.
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Mon, 19 Dec 2022 11:07:39 +0000 (03:07 -0800)]
scsi: qla2xxx: Fix link failure in NPIV environment
commit
b1ae65c082f74536ec292b15766f2846f0238373 upstream.
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
Fixes: 0d6e61bc6a4f ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Sat, 28 Jan 2023 00:04:13 +0000 (16:04 -0800)]
scsi: aacraid: Allocate cmd_priv with scsicmd
commit
7ab734fc759828707dae22fe48b1eb4dcf70beea upstream.
The aac_priv() helper assumes that the private cmd area immediately follows
struct scsi_cmnd. Allocate this space as part of scsicmd, else there is a
risk of heap overflow. Seen with GCC 13:
../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]
841 | status = cmd_priv->status;
| ^~
In file included from ../include/linux/resource_ext.h:11,
from ../include/linux/pci.h:40,
from ../drivers/scsi/aacraid/aachba.c:22:
In function 'kmalloc',
inlined from 'kzalloc' at ../include/linux/slab.h:720:9,
inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30:
../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace'
580 | return kmalloc_trace(
| ^~~~~~~~~~~~~~
581 | kmalloc_caches[kmalloc_type(flags)][index],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
582 | flags, size);
| ~~~~~~~~~~~~
Fixes: 76a3451b64c6 ("scsi: aacraid: Move the SCSI pointer to private command data")
Link: https://lore.kernel.org/r/20230128000409.never.976-kees@kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasant Hegde [Wed, 15 Feb 2023 05:26:42 +0000 (05:26 +0000)]
iommu/amd: Improve page fault error reporting
commit
996d120b4de2b0d6b592bd9fbbe6e244b81ab3cc upstream.
If IOMMU domain for device group is not setup properly then we may hit
IOMMU page fault. Current page fault handler assumes that domain is
always setup and it will hit NULL pointer derefence (see below sample log).
Lets check whether domain is setup or not and log appropriate message.
Sample log:
----------
amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6
BUG: kernel NULL pointer dereference, address:
0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89
Hardware name: xxx
RIP: 0010:report_iommu_fault+0x11/0x90
[...]
Call Trace:
<TASK>
amd_iommu_int_thread+0x60c/0x760
? __pfx_irq_thread_fn+0x10/0x10
irq_thread_fn+0x1f/0x60
irq_thread+0xea/0x1a0
? preempt_count_add+0x6a/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0xe9/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865
Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/
Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com
Cc: stable@vger.kernel.org
[joro: Edit commit message]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavrilov Ilia [Thu, 2 Feb 2023 08:26:56 +0000 (08:26 +0000)]
iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
commit
b6b26d86c61c441144c72f842f7469bb686e1211 upstream.
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20230202082719.1513849-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu (Google) [Mon, 20 Feb 2023 23:49:16 +0000 (08:49 +0900)]
tracing/eprobe: Fix to add filter on eprobe description in README file
commit
133921530c42960c07d25d12677f9e131a2b0cdf upstream.
Fix to add a description of the filter on eprobe in README file. This
is required to identify the kernel supports the filter on eprobe or not.
Link: https://lore.kernel.org/all/167309833728.640500.12232259238201433587.stgit@devnote3/
Fixes: 752be5c5c910 ("tracing/eprobe: Add eprobe filter support")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antonio Alvarez Feijoo [Tue, 21 Feb 2023 23:27:35 +0000 (08:27 +0900)]
tools/bootconfig: fix single & used for logical condition
commit
cf8c59a3756b2735c409a9b3ac1e4ec556546a7a upstream.
A single & will create a background process and return true, so the grep
command will run even if the file checked in the first condition does not
exist.
Link: https://lore.kernel.org/all/20230112114215.17103-1-antonio.feijoo@suse.com/
Fixes: 1eaad3ac3f39 ("tools/bootconfig: Use per-group/all enable option in ftrace2bconf script")
Signed-off-by: Antonio Alvarez Feijoo <antonio.feijoo@suse.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mukesh Ojha [Tue, 14 Feb 2023 12:06:43 +0000 (17:36 +0530)]
ring-buffer: Handle race between rb_move_tail and rb_check_pages
commit
8843e06f67b14f71c044bf6267b2387784c7e198 upstream.
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:
ffffb5564089bd00 EFLAGS:
00000203
RAX:
0000000000000000 RBX:
ffff9db385a2bf81 RCX:
ffffb5564089bd18
RDX:
ffff9db281110100 RSI:
0000000000000fe4 RDI:
ffff9db380145400
RBP:
ffff9db385a2bf80 R08:
ffff9db385a2bfc0 R09:
ffff9db385a2bfc2
R10:
ffff9db385a6c000 R11:
ffff9db385a2bf80 R12:
0000000000000000
R13:
00000000000003e8 R14:
ffff9db281110100 R15:
ffffffffbb006108
FS:
0000000000000000(0000) GS:
ffff9db3bdcc0000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00005602323024c8 CR3:
0000000022e0c000 CR4:
00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace
0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian]
Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com
Cc: <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tong Tiangen [Sun, 29 Jan 2023 04:06:51 +0000 (04:06 +0000)]
memory tier: release the new_memtier in find_create_memory_tier()
commit
93419139fa14124c1c507d804f2b28866ebee28d upstream.
In find_create_memory_tier(), if failed to register device, then we should
release new_memtier from the tier list and put device instead of memtier.
Link: https://lkml.kernel.org/r/20230129040651.1329208-1-tongtiangen@huawei.com
Fixes: 9832fb87834e ("mm/demotion: expose memory tier details via sysfs")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Guohanjun <guohanjun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt [Wed, 18 Jan 2023 21:37:25 +0000 (16:37 -0500)]
ktest.pl: Add RUN_TIMEOUT option with default unlimited
commit
4e7d2a8f0b52abf23b1dc13b3d88bc0923383cd5 upstream.
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt [Wed, 18 Jan 2023 16:31:25 +0000 (11:31 -0500)]
ktest.pl: Fix missing "end_monitor" when machine check fails
commit
e8bf9b98d40dbdf4e39362e3b85a70c61da68cb7 upstream.
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu (Google) [Mon, 20 Feb 2023 23:49:16 +0000 (08:49 +0900)]
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
commit
4fbd2f83fda0ca44a2ec6421ca3508b355b31858 upstream.
Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.
This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().
To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.
Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.
Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/
Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/
Fixes: e4add247789e ("kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt [Wed, 18 Jan 2023 21:32:13 +0000 (16:32 -0500)]
ktest.pl: Give back console on Ctrt^C on monitor
commit
83d29d439cd3ef23041570d55841f814af2ecac0 upstream.
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yin Fengwei [Fri, 23 Dec 2022 13:52:07 +0000 (21:52 +0800)]
mm/thp: check and bail out if page in deferred queue already
commit
81e506bec9be1eceaf5a2c654e28ba5176ef48d8 upstream.
Kernel build regression with LLVM was reported here:
https://lore.kernel.org/all/Y1GCYXGtEVZbcv%2F5@dev-arch.thelio-3990X/ with
commit
f35b5d7d676e ("mm: align larger anonymous mappings on THP
boundaries"). And the commit
f35b5d7d676e was reverted.
It turned out the regression is related with madvise(MADV_DONTNEED)
was used by ld.lld. But with none PMD_SIZE aligned parameter len.
trace-bpfcc captured:
531607 531732 ld.lld do_madvise.part.0 start: 0x7feca9000000, len: 0x7fb000, behavior: 0x4
531607 531793 ld.lld do_madvise.part.0 start: 0x7fec86a00000, len: 0x7fb000, behavior: 0x4
If the underneath physical page is THP, the madvise(MADV_DONTNEED) can
trigger split_queue_lock contention raised significantly. perf showed
following data:
14.85% 0.00% ld.lld [kernel.kallsyms] [k]
entry_SYSCALL_64_after_hwframe
11.52%
entry_SYSCALL_64_after_hwframe
do_syscall_64
__x64_sys_madvise
do_madvise.part.0
zap_page_range
unmap_single_vma
unmap_page_range
page_remove_rmap
deferred_split_huge_page
__lock_text_start
native_queued_spin_lock_slowpath
If THP can't be removed from rmap as whole THP, partial THP will be
removed from rmap by removing sub-pages from rmap. Even the THP head page
is added to deferred queue already, the split_queue_lock will be acquired
and check whether the THP head page is in the queue already. Thus, the
contention of split_queue_lock is raised.
Before acquire split_queue_lock, check and bail out early if the THP
head page is in the queue already. The checking without holding
split_queue_lock could race with deferred_split_scan, but it doesn't
impact the correctness here.
Test result of building kernel with ld.lld:
commit
7b5a0b664ebe (parent commit of
f35b5d7d676e):
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
6:07.99 real, 26367.77 user, 5063.35 sys
commit
f35b5d7d676e:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
7:22.15 real, 26235.03 user, 12504.55 sys
commit
f35b5d7d676e with the fixing patch:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
6:08.49 real, 26520.15 user, 5047.91 sys
Link: https://lkml.kernel.org/r/20221223135207.2275317-1-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Weiner [Wed, 7 Dec 2022 13:00:39 +0000 (14:00 +0100)]
mm: memcontrol: deprecate charge moving
commit
da34a8484d162585e22ed8c1e4114aa2f60e3567 upstream.
Charge moving mode in cgroup1 allows memory to follow tasks as they
migrate between cgroups. This is, and always has been, a questionable
thing to do - for several reasons.
First, it's expensive. Pages need to be identified, locked and isolated
from various MM operations, and reassigned, one by one.
Second, it's unreliable. Once pages are charged to a cgroup, there isn't
always a clear owner task anymore. Cache isn't moved at all, for example.
Mapped memory is moved - but if trylocking or isolating a page fails,
it's arbitrarily left behind. Frequent moving between domains may leave a
task's memory scattered all over the place.
Third, it isn't really needed. Launcher tasks can kick off workload tasks
directly in their target cgroup. Using dedicated per-workload groups
allows fine-grained policy adjustments - no need to move tasks and their
physical pages between control domains. The feature was never
forward-ported to cgroup2, and it hasn't been missed.
Despite it being a niche usecase, the maintenance overhead of supporting
it is enormous. Because pages are moved while they are live and subject
to various MM operations, the synchronization rules are complicated.
There are lock_page_memcg() in MM and FS code, which non-cgroup people
don't understand. In some cases we've been able to shift code and cgroup
API calls around such that we can rely on native locking as much as
possible. But that's fragile, and sometimes we need to hold MM locks for
longer than we otherwise would (pte lock e.g.).
Mark the feature deprecated. Hopefully we can remove it soon.
And backport into -stable kernels so that people who develop against
earlier kernels are warned about this deprecation as early as possible.
[akpm@linux-foundation.org: fix memory.rst underlining]
Link: https://lkml.kernel.org/r/Y5COd+qXwk/S+n8N@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Ogness [Thu, 29 Dec 2022 13:43:39 +0000 (14:49 +0106)]
docs: gdbmacros: print newest record
commit
f2e4cca2f670c8e52fbb551a295f2afc9aa2bd72 upstream.
@head_id points to the newest record, but the printing loop
exits when it increments to this value (before printing).
Exit the printing loop after the newest record has been printed.
The python-based function in scripts/gdb/linux/dmesg.py already
does this correctly.
Fixes: e60768311af8 ("scripts/gdb: update for lockless printk ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221229134339.197627-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Wed, 4 Jan 2023 08:31:10 +0000 (16:31 +0800)]
remoteproc/mtk_scp: Move clk ops outside send_lock
commit
e46ceea3148163166ef9b7bcac578e72dd30c064 upstream.
Clocks are properly reference counted and do not need to be inside the
lock range.
Right now this triggers a false-positive lockdep warning on MT8192 based
Chromebooks, through a combination of mtk-scp that has a cros-ec-rpmsg
sub-device, the (actual) cros-ec I2C adapter registration, I2C client
(not on cros-ec) probe doing i2c transfers and enabling clocks.
This is a false positive because the cros-ec-rpmsg under mtk-scp does
not have an I2C adapter, and also each I2C adapter and cros-ec instance
have their own mutex.
Move the clk operations outside of the send_lock range.
Fixes: 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230104083110.736377-1-wenst@chromium.org
[Fixed "Fixes:" tag line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus [Wed, 21 Dec 2022 08:30:11 +0000 (09:30 +0100)]
media: ipu3-cio2: Fix PM runtime usage_count in driver unbind
commit
909d3096ac99fa2289f9b8945a3eab2269947a0a upstream.
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.
Fixes: commit c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elvira Khabirova [Sat, 18 Feb 2023 22:43:59 +0000 (23:43 +0100)]
mips: fix syscall_get_nr
commit
85cc91e2ba4262a602ec65e2b76c4391a9e60d3d upstream.
The implementation of syscall_get_nr on mips used to ignore the task
argument and return the syscall number of the calling thread instead of
the target thread.
The bug was exposed to user space by commit
201766a20e30f ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.
Link: https://github.com/strace/strace/issues/235
Fixes: c2d9f1775731 ("MIPS: Fix syscall_get_nr for the syscall exit tracing.")
Cc: <stable@vger.kernel.org> # v3.19+
Co-developed-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Elvira Khabirova <lineprinter0@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Thu, 16 Feb 2023 08:36:02 +0000 (00:36 -0800)]
dax/kmem: Fix leak of memory-hotplug resources
commit
e686c32590f40bffc45f105c04c836ffad3e531a upstream.
While experimenting with CXL region removal the following corruption of
/proc/iomem appeared.
Before:
f010000000-
f04fffffff : CXL Window 0
f010000000-
f02fffffff : region4
f010000000-
f02fffffff : dax4.0
f010000000-
f02fffffff : System RAM (kmem)
After (modprobe -r cxl_test):
f010000000-
f02fffffff : **redacted binary garbage**
f010000000-
f02fffffff : System RAM (kmem)
...and testing further the same is visible with persistent memory
assigned to kmem:
Before:
480000000-
243fffffff : Persistent Memory
480000000-
57e1fffff : namespace3.0
580000000-
243fffffff : dax3.0
580000000-
243fffffff : System RAM (kmem)
After (ndctl disable-region all):
480000000-
243fffffff : Persistent Memory
580000000-
243fffffff : ***redacted binary garbage***
580000000-
243fffffff : System RAM (kmem)
The corrupted data is from a use-after-free of the "dax4.0" and "dax3.0"
resources, and it also shows that the "System RAM (kmem)" resource is
not being removed. The bug does not appear after "modprobe -r kmem", it
requires the parent of "dax4.0" and "dax3.0" to be removed which
re-parents the leaked "System RAM (kmem)" instances. Those in turn
reference the freed resource as a parent.
First up for the fix is release_mem_region_adjustable() needs to
reliably delete the resource inserted by add_memory_driver_managed().
That is thwarted by a check for IORESOURCE_SYSRAM that predates the
dax/kmem driver, from commit:
65c78784135f ("kernel, resource: check for IORESOURCE_SYSRAM in release_mem_region_adjustable")
That appears to be working around the behavior of HMM's
"MEMORY_DEVICE_PUBLIC" facility that has since been deleted. With that
check removed the "System RAM (kmem)" resource gets removed, but
corruption still occurs occasionally because the "dax" resource is not
reliably removed.
The dax range information is freed before the device is unregistered, so
the driver can not reliably recall (another use after free) what it is
meant to release. Lastly if that use after free got lucky, the driver
was covering up the leak of "System RAM (kmem)" due to its use of
release_resource() which detaches, but does not free, child resources.
The switch to remove_resource() forces remove_memory() to be responsible
for the deletion of the resource added by add_memory_driver_managed().
Fixes: c2f3011ee697 ("device-dax: add an allocation interface for device-dax instances")
Cc: <stable@vger.kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167653656244.3147810.5705900882794040229.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 7 Jan 2023 00:25:59 +0000 (19:25 -0500)]
alpha: fix FEN fault handling
commit
977a3009547dad4a5bc95d91be4a58c9f7eedac0 upstream.
Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning. Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:
.global _start
_start:
call_pal 0xae
lda $0, 0
ldq $0, 0($0)
- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).
Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.
Incidentally, the check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs). The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3. PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-coded variant here is actually equivalent
to !user_mode(regs). Harder to follow, though...
Cc: stable@vger.kernel.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naoya Horiguchi [Tue, 21 Feb 2023 08:59:05 +0000 (17:59 +0900)]
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
commit
6da6b1d4a7df8c35770186b53ef65d388398e139 upstream.
After a memory error happens on a clean folio, a process unexpectedly
receives SIGBUS when it accesses the error page. This SIGBUS killing is
pointless and simply degrades the level of RAS of the system, because the
clean folio can be dropped without any data lost on memory error handling
as we do for a clean pagecache.
When memory_failure() is called on a clean folio, try_to_unmap() is called
twice (one from split_huge_page() and one from hwpoison_user_mappings()).
The root cause of the issue is that pte conversion to hwpoisoned entry is
now done in the first call of try_to_unmap() because PageHWPoison is
already set at this point, while it's actually expected to be done in the
second call. This behavior disturbs the error handling operation like
removing pagecache, which results in the malfunction described above.
So convert TTU_IGNORE_HWPOISON into TTU_HWPOISON and set TTU_HWPOISON only
when we really intend to convert pte to hwpoison entry. This can prevent
other callers of try_to_unmap() from accidentally converting to hwpoison
entries.
Link: https://lkml.kernel.org/r/20230221085905.1465385-1-naoya.horiguchi@linux.dev
Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guilherme G. Piccoli [Sun, 26 Feb 2023 16:08:38 +0000 (13:08 -0300)]
panic: fix the panic_print NMI backtrace setting
commit
b905039e428d639adeebb719b76f98865ea38d4d upstream.
Commit
8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 23 Feb 2023 00:33:30 +0000 (00:33 +0000)]
regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
commit
80d2c29e09e663761c2778167a625b25ffe01b6f upstream.
For regulators with 'off-on-delay-us' the regulator framework currently
uses ktime_get() to determine how long the regulator has been off
before re-enabling it (after a delay if needed). A problem with using
ktime_get() is that it doesn't account for the time the system is
suspended. As a result a regulator with a longer 'off-on-delay' (e.g.
500ms) that was switched off during suspend might still incurr in a
delay on resume before it is re-enabled, even though the regulator
might have been off for hours. ktime_get_boottime() accounts for
suspend time, use it instead of ktime_get().
Fixes: a8ce7bd89689 ("regulator: core: Fix off_on_delay handling")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230223003301.v2.1.I9719661b8eb0a73b8c416f9c26cf5bd8c0563f99@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiubo Li [Mon, 13 Feb 2023 05:56:20 +0000 (13:56 +0800)]
ceph: update the time stamps and try to drop the suid/sgid
commit
e027253c4b77d395798600a90b6a96fe4adf4d5e upstream.
The fallocate will try to clear the suid/sgid if a unprevileged user
changed the file.
There is no POSIX item requires that we should clear the suid/sgid
in fallocate code path but this is the default behaviour for most of
the filesystems and the VFS layer. And also the same for the write
code path, which have already support it.
And also we need to update the time stamps since the fallocate will
change the file contents.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/58054
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Fri, 24 Feb 2023 17:48:54 +0000 (18:48 +0100)]
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
commit
f7c4d9b133c7a04ca619355574e96b6abf209fba upstream.
If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add(). The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().
Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.
Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Mikhalitsyn [Thu, 26 Jan 2023 10:23:18 +0000 (11:23 +0100)]
fuse: add inode/permission checks to fileattr_get/fileattr_set
commit
1cc4606d19e3710bfab3f6704b87ff9580493c69 upstream.
It looks like these checks were accidentally lost during the conversion to
fileattr API.
Fixes: 72227eac177d ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Wed, 22 Feb 2023 17:52:32 +0000 (17:52 +0000)]
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
commit
060a2c92d1b627c86c5c42ca69baf00457c00c5a upstream.
Revert the HUGETLB_PAGE_FREE_VMEMMAP selection from commit
1e63ac088f20
("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64") but
keep the flush_dcache_page() compound_head() change as it aligns with
the corresponding check in the __sync_icache_dcache() function.
The original config option was renamed in commit
47010c040dec ("mm:
hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*") to
HUGETLB_PAGE_OPTIMIZE_VMEMMAP and the flush_dcache_page() check was
further simplified by commit
2da1c30929a2 ("mm: hugetlb_vmemmap: delete
hugetlb_optimize_vmemmap_enabled()").
The reason for the revert is that the generic vmemmap_remap_pte()
function changes both the permissions (writeable to read-only) and the
output address (pfn) of the vmemmap ptes. This is deemed UNPREDICTABLE
by the Arm architecture without a break-before-make sequence (make the
PTE invalid, TLBI, write the new valid PTE). However, such sequence is
not possible since the vmemmap may be concurrently accessed by the
kernel. Disable the optimisation until a better solution is found.
Fixes: 1e63ac088f20 ("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64")
Cc: <stable@vger.kernel.org> # 5.19.x
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/Y9pZALdn3pKiJUeQ@arm.com
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230222175232.540851-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Feb 2023 10:58:40 +0000 (11:58 +0100)]
ARM: dts: exynos: correct TMU phandle in Odroid HC1
commit
2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit
3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu
10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of
10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Feb 2023 10:58:39 +0000 (11:58 +0100)]
ARM: dts: exynos: correct TMU phandle in Odroid XU
commit
9372eca505e7a19934d750b4b4c89a3652738e66 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Feb 2023 10:58:38 +0000 (11:58 +0100)]
ARM: dts: exynos: correct TMU phandle in Exynos5250
commit
33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Feb 2023 10:58:41 +0000 (11:58 +0100)]
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
commit
a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit
3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu
10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of
10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Feb 2023 10:58:36 +0000 (11:58 +0100)]
ARM: dts: exynos: correct TMU phandle in Exynos4
commit
8e4505e617a80f601e2f53a917611777f128f925 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Feb 2023 10:58:37 +0000 (11:58 +0100)]
ARM: dts: exynos: correct TMU phandle in Exynos4210
commit
408ab6786dbf6dd696488054c9559681112ef994 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Mon, 23 Jan 2023 13:19:30 +0000 (18:49 +0530)]
ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
commit
af4ab377543853b690cc85b4c46cf976ab560dc2 upstream.
SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.12
Fixes: a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Mon, 23 Jan 2023 13:19:31 +0000 (18:49 +0530)]
ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
commit
157178a7912e00a0aa0371dc9041952c1a21d112 upstream.
SDX65 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 98187f7b74bf ("ARM: dts: qcom: sdx65: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zev Weiss [Mon, 2 Jan 2023 21:28:57 +0000 (13:28 -0800)]
hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div()
commit
2fbb848b65cde5b876cce52ebcb34de4aaa5a94a upstream.
Commit
4ef2774511dc ("hwmon: (nct6775) Convert register access to
regmap API") fumbled the shifting & masking of the fan_div values such
that odd-numbered fan divisors would always be set to zero. Fix it so
that we actually OR in the bits we meant to.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Cc: stable@kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230102212857.5670-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zev Weiss [Thu, 2 Feb 2023 02:18:25 +0000 (18:18 -0800)]
hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation
commit
f00093608fa790580da309bb9feb5108fbe7c331 upstream.
The find_last_bit() call produces the index of the highest-numbered
core in core_mask; because cores are numbered from zero, the number of
elements we need to allocate is one more than that.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@kernel.org # v5.18
Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver")
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230202021825.21486-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sun, 22 Jan 2023 19:03:31 +0000 (14:03 -0500)]
dm flakey: fix a bug with 32-bit highmem systems
commit
8eb29c4fbf9661e6bd4dd86197a37ffe0ecc9d50 upstream.
The function page_address does not work with 32-bit systems with high
memory. Use bvec_kmap_local/kunmap_local instead.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sun, 22 Jan 2023 19:02:57 +0000 (14:02 -0500)]
dm flakey: don't corrupt the zero page
commit
f50714b57aecb6b3dc81d578e295f86d9c73f078 upstream.
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.
Cc: stable@vger.kernel.org
Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Thu, 26 Jan 2023 09:59:10 +0000 (09:59 +0000)]
dm cache: free background tracker's queued work in btracker_destroy
commit
95ab80a8a0fef2ce0cc494a306dd283948066ce7 upstream.
Otherwise the kernel can BUG with:
[ 2245.426978] =============================================================================
[ 2245.435155] BUG bt_work (Tainted: G B W ): Objects remaining in bt_work on __kmem_cache_shutdown()
[ 2245.445233] -----------------------------------------------------------------------------
[ 2245.445233]
[ 2245.454879] Slab 0x00000000b0ce2b30 objects=64 used=2 fp=0x000000000a3c6a4e flags=0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
[ 2245.467300] CPU: 7 PID: 10805 Comm: lvm Kdump: loaded Tainted: G B W 6.0.0-rc2 #19
[ 2245.476078] Hardware name: Dell Inc. PowerEdge R7525/0590KW, BIOS 2.5.6 10/06/2021
[ 2245.483646] Call Trace:
[ 2245.486100] <TASK>
[ 2245.488206] dump_stack_lvl+0x34/0x48
[ 2245.491878] slab_err+0x95/0xcd
[ 2245.495028] __kmem_cache_shutdown.cold+0x31/0x136
[ 2245.499821] kmem_cache_destroy+0x49/0x130
[ 2245.503928] btracker_destroy+0x12/0x20 [dm_cache]
[ 2245.508728] smq_destroy+0x15/0x60 [dm_cache_smq]
[ 2245.513435] dm_cache_policy_destroy+0x12/0x20 [dm_cache]
[ 2245.518834] destroy+0xc0/0x110 [dm_cache]
[ 2245.522933] dm_table_destroy+0x5c/0x120 [dm_mod]
[ 2245.527649] __dm_destroy+0x10e/0x1c0 [dm_mod]
[ 2245.532102] dev_remove+0x117/0x190 [dm_mod]
[ 2245.536384] ctl_ioctl+0x1a2/0x290 [dm_mod]
[ 2245.540579] dm_ctl_ioctl+0xa/0x20 [dm_mod]
[ 2245.544773] __x64_sys_ioctl+0x8a/0xc0
[ 2245.548524] do_syscall_64+0x5c/0x90
[ 2245.552104] ? syscall_exit_to_user_mode+0x12/0x30
[ 2245.556897] ? do_syscall_64+0x69/0x90
[ 2245.560648] ? do_syscall_64+0x69/0x90
[ 2245.564394] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 2245.569447] RIP: 0033:0x7fe52583ec6b
...
[ 2245.646771] ------------[ cut here ]------------
[ 2245.651395] kmem_cache_destroy bt_work: Slab cache still has objects when called from btracker_destroy+0x12/0x20 [dm_cache]
[ 2245.651408] WARNING: CPU: 7 PID: 10805 at mm/slab_common.c:478 kmem_cache_destroy+0x128/0x130
Found using: lvm2-testsuite --only "cache-single-split.sh"
Ben bisected and found that commit
0495e337b703 ("mm/slab_common:
Deleting kobject in kmem_cache_destroy() without holding
slab_mutex/cpu_hotplug_lock") first exposed dm-cache's incomplete
cleanup of its background tracker work objects.
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Tested-by: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sun, 22 Jan 2023 19:03:56 +0000 (14:03 -0500)]
dm flakey: fix logic when corrupting a bio
commit
aa56b9b75996ff4c76a0a4181c2fa0206c3d91cc upstream.
If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.
Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Pandruvada [Wed, 1 Feb 2023 20:39:41 +0000 (12:39 -0800)]
thermal: intel: powerclamp: Fix cur_state for multi package system
commit
8e47363588377e1bdb65e2b020b409cfb44dd260 upstream.
The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.
It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.
For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.
Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.
Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Thu, 16 Feb 2023 11:54:47 +0000 (03:54 -0800)]
qede: fix interrupt coalescing configuration
commit
908d4bb7c54caa58253a363d63e797a468eaf321 upstream.
On default driver load device gets configured with unexpected
higher interrupt coalescing values instead of default expected
values as memory allocated from krealloc() is not supposed to
be zeroed out and may contain garbage values.
Fix this by allocating the memory of required size first with
kcalloc() and then use krealloc() to resize and preserve the
contents across down/up of the interface.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Fixes: b0ec5489c480 ("qede: preserve per queue stats across up/down of interface")
Cc: stable@vger.kernel.org
Cc: Bhaskar Upadhaya <bupadhaya@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2160054
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 6 Feb 2023 19:33:06 +0000 (20:33 +0100)]
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
commit
7787943a3a8ade6594a68db28c166adbb1d3708c upstream.
Some ARMv4 processors don't support suspend, which leads
to a build failure with the tegra and qualcomm cpuidle driver:
WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND
Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n]
Selected by [y]:
- ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
arch/arm/kernel/sleep.o: in function `__cpu_suspend':
(.text+0x68): undefined reference to `cpu_sa110_suspend_size'
(.text+0x68): undefined reference to `cpu_fa526_suspend_size'
Add an explicit dependency to make randconfig builds avoid
this combination.
Fixes: faae6c9f2e68 ("cpuidle: tegra: Enable compile testing")
Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Bornand [Wed, 15 Feb 2023 08:47:53 +0000 (08:47 +0000)]
wifi: cfg80211: Set SSID if it is not already set
commit
c38c701851011c94ce3be1ccb3593678d2933fd8 upstream.
When a connection was established without going through
NL80211_CMD_CONNECT, the ssid was never set in the wireless_dev struct.
Now we set it in __cfg80211_connect_result() when it is not already set.
When using a userspace configuration that does not call
cfg80211_connect() (can be checked with breakpoints in the kernel),
this patch should allow `networkctl status device_name` to output the
SSID instead of null.
Cc: stable@vger.kernel.org
Reported-by: Yohan Prod'homme <kernel@zoddo.fr>
Fixes: 7b0a0e3c3a88 (wifi: cfg80211: do some rework towards MLO link APIs)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216711
Signed-off-by: Marc Bornand <dev.mbornand@systemb.ch>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Wetzel [Tue, 24 Jan 2023 14:18:56 +0000 (15:18 +0100)]
wifi: cfg80211: Fix use after free for wext
commit
015b8cc5e7c4d7bb671f1984d7b7338c310b185b upstream.
Key information in wext.connect is not reset on (re)connect and can hold
data from a previous connection.
Reset key data to avoid that drivers or mac80211 incorrectly detect a
WEP connection request and access the freed or already reused memory.
Additionally optimize cfg80211_sme_connect() and avoid an useless
schedule of conn_work.
Fixes: fffd0934b939 ("cfg80211: rework key operation")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.de
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Len Brown [Wed, 1 Feb 2023 18:32:01 +0000 (12:32 -0600)]
wifi: ath11k: allow system suspend to survive ath11k
commit
7c15430822e71e90203d87e6d0cfe83fa058b0dc upstream.
When ath11k runs into internal errors upon suspend,
it returns an error code to pci_pm_suspend, which
aborts the entire system suspend.
The driver should not abort system suspend, but should
keep its internal errors to itself, and allow the system
to suspend. Otherwise, a user can suspend a laptop
by closing the lid and sealing it into a case, assuming
that is will suspend, rather than heating up and draining
the battery when in transit.
In practice, the ath11k device seems to have plenty of transient
errors, and subsequent suspend cycles after this failure
often succeed.
https://bugzilla.kernel.org/show_bug.cgi?id=216968
Fixes: d1b0c33850d29 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bitterblue Smith [Sun, 8 Jan 2023 15:08:16 +0000 (17:08 +0200)]
wifi: rtl8xxxu: Use a longer retry limit of 48
commit
2a86aa9a1892d60ef2e3f310f5b42b8b05546d65 upstream.
The Realtek rate control algorithm goes back and forth a lot between
the highest and the lowest rate it's allowed to use. This is due to
a lot of frames being dropped because the retry limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they
are 4 for long frames and 7 for short frames.)
The vendor drivers hardcode the value 48 for both retry limits (for
station mode), which makes dropped frames very rare and thus the rate
control is more stable.
Because most Realtek chips handle the rate control in the firmware,
which can't be modified, ignore the limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during
chip initialisation), same as the vendor drivers.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ping-Ke Shih [Thu, 16 Feb 2023 05:36:33 +0000 (13:36 +0800)]
wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice
commit
4a267bc5ea8f159b614d0549030216d0434eccca upstream.
Use power state to decide whether we can enter or leave IPS accurately,
and then prevent to power on/off twice.
The commit
6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS")
would like to prevent this as well, but it still can't entirely handle all
cases. The exception is that WiFi gets connected and does suspend/resume,
it will power on twice and cause it failed to power on after resuming,
like:
rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2
rtw_8723de 0000:03:00.0: mac power on failed
rtw_8723de 0000:03:00.0: failed to power on mac
rtw_8723de 0000:03:00.0: leave idle state failed
rtw_8723de 0000:03:00.0: failed to leave ips state
rtw_8723de 0000:03:00.0: failed to leave idle state
rtw_8723de 0000:03:00.0: failed to send h2c command
To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state,
and call rtw_mac_pre_system_cfg() to configure registers properly between
power-off/-on.
Reported-by: Paul Gover <pmw.gover@yahoo.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016
Fixes: 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Thu, 16 Feb 2023 17:10:05 +0000 (12:10 -0500)]
dm: add cond_resched() to dm_wq_requeue_work()
commit
f77692d65d54665d81815349cc727baa85e8b71d upstream.
Otherwise the while() loop in dm_wq_requeue_work() can result in a
"dead loop" on systems that have preemption disabled. This is
particularly problematic on single cpu systems.
Fixes: 8b211aaccb915 ("dm: add two stage requeue mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pingfan Liu [Wed, 15 Feb 2023 11:23:40 +0000 (19:23 +0800)]
dm: add cond_resched() to dm_wq_work()
commit
0ca44fcef241768fd25ee763b3d203b9852f269b upstream.
Otherwise the while() loop in dm_wq_work() can result in a "dead
loop" on systems that have preemption disabled. This is particularly
problematic on single cpu systems.
Cc: stable@vger.kernel.org
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Tue, 7 Feb 2023 13:33:06 +0000 (08:33 -0500)]
dm: send just one event on resize, not two
commit
7533afa1d27ba1234146d31d2402c195cf195962 upstream.
Device mapper sends an uevent when the device is suspended, using the
function set_capacity_and_notify. However, this causes a race condition
with udev.
Udev skips scanning dm devices that are suspended. If we send an uevent
while we are suspended, udev will be racing with device mapper resume
code. If the device mapper resume code wins the race, udev will process
the uevent after the device is resumed and it will properly scan the
device.
However, if udev wins the race, it will receive the uevent, find out that
the dm device is suspended and skip scanning the device. This causes bugs
such as systemd unmounting the device - see
https://bugzilla.redhat.com/show_bug.cgi?id=
2158628
This commit fixes this race.
We replace the function set_capacity_and_notify with set_capacity, so that
the uevent is not sent at this point. In do_resume, we detect if the
capacity has changed and we pass a boolean variable need_resize_uevent to
dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if
need_resize_uevent is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Peter Rajnoha <prajnoha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Louis Rannou [Fri, 3 Feb 2023 07:07:54 +0000 (09:07 +0200)]
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
commit
f0f0cfdc3a024e21161714f2e05f0df3b84d42ad upstream.
spi_nor_set_erase_type() was used either to set or to mask out an erase
type. When we used it to mask out an erase type a shift-out-of-bounds
was hit:
UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent
4294967295 is too large for 32-bit type 'int'
The setting of the size_{shift, mask} and of the opcode are unnecessary
when the erase size is zero, as throughout the code just the erase size
is considered to determine whether an erase type is supported or not.
Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF
is an unused opcode. Thus when masking out an erase type, just set the
erase size to zero. This will fix the shift-out-of-bounds.
Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Louis Rannou <lrannou@baylibre.com>
Tested-by: Alexander Stein <Alexander.Stein@tq-group.com>
Link: https://lore.kernel.org/r/20230203070754.50677-1-tudor.ambarus@linaro.org
[ta: refine changes, new commit message, fix compilation error]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>