futex: Add another early deadlock detection check

commit 866293ee54227584ffcb4a42f69c1f365974ba7f upstream.

Dave Jones trinity syscall fuzzer exposed an issue in the deadlock
detection code of rtmutex:
  http://lkml.kernel.org/r/20140429151655.GA14277@redhat.com

That underlying issue has been fixed with a patch to the rtmutex code,
but the futex code must not call into rtmutex in that case because
    - it can detect that issue early
    - it avoids a different and more complex fixup for backing out

If the user space variable got manipulated to 0x80000000 which means
no lock holder, but the waiters bit set and an active pi_state in the
kernel is found we can figure out the recursive locking issue by
looking at the pi_state owner. If that is the current task, then we
can safely return -EDEADLK.

The check should have been added in commit 59fa62451 (futex: Handle
futex_pi OWNER_DIED take over correctly) already, but I did not see
the above issue caused by user space manipulation back then.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.097349971@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-gro: reset skb->truesize in napi_reuse_skb()

[ Upstream commit e33d0ba8047b049c9262fdb1fcafb93cb52ceceb ]

Recycling skb always had been very tough...

This time it appears GRO layer can accumulate skb->truesize
adjustments made by drivers when they attach a fragment to skb.

skb_gro_receive() can only subtract from skb->truesize the used part
of a fragment.

I spotted this problem seeing TcpExtPruneCalled and
TcpExtTCPRcvCollapsed that were unexpected with a recent kernel, where
TCP receive window should be sized properly to accept traffic coming
from a driver not overshooting skb->truesize.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skb: Add inline helper for getting the skb end offset from head

[ Upstream commit ec47ea82477404631d49b8e568c71826c9b663ac ]

With the recent changes for how we compute the skb truesize it occurs to me
we are probably going to have a lot of calls to skb_end_pointer -
skb->head.  Instead of running all over the place doing that it would make
more sense to just make it a separate inline skb_end_offset(skb) that way
we can return the correct value without having gcc having to do all the
optimization to cancel out skb->head - skb->head.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: initialise the itag variable in __mkroute_input

[ Upstream commit fbdc0ad095c0a299e9abf5d8ac8f58374951149a ]

the value of itag is a random value from stack, and may not be initiated by
fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID
is not set

This will make the cached dst uncertainty

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

act_mirred: do not drop packets when fails to mirror it

[ Upstream commit 16c0b164bd24d44db137693a36b428ba28970c62 ]

We drop packet unconditionally when we fail to mirror it. This is not intended
in some cases. Consdier for kvm guest, we may mirror the traffic of the bridge
to a tap device used by a VM. When kernel fails to mirror the packet in
conditions such as when qemu crashes or stop polling the tap, it's hard for the
management software to detect such condition and clean the the mirroring
before. This would lead all packets to the bridge to be dropped and break the
netowrk of other virtual machines.

To solve the issue, the patch does not drop packets when kernel fails to mirror
it, and only drop the redirected packets.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fib_semantics: increment fib_info_cnt after fib_info allocation

[ Upstream commit aeefa1ecfc799b0ea2c4979617f14cecd5cccbfd ]

Increment fib_info_cnt in fib_create_info() right after successfuly
alllocating fib_info structure, overwise fib_metrics allocation failure
leads to fib_info_cnt incorrectly decremented in free_fib_info(), called
on error path from fib_create_info().

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: ip_forward: fix inverted local_df test

[ Upstream commit ca6c5d4ad216d5942ae544bbf02503041bd802aa ]

local_df means 'ignore DF bit if set', so if its set we're
allowed to perform ip fragmentation.

This wasn't noticed earlier because the output path also drops such skbs
(and emits needed icmp error) and because netfilter ip defrag did not
set local_df until couple of days ago.

Only difference is that DF-packets-larger-than MTU now discarded
earlier (f.e. we avoid pointless netfilter postrouting trip).

While at it, drop the repeated test ip_exceeds_mtu, checking it once
is enough...

Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_cubic: fix the range of delayed_ack

[ Upstream commit 0cda345d1b2201dd15591b163e3c92bad5191745 ]

commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent
divide error) try to prevent divide error, but there is still a little
chance that delayed_ack can reach zero. In case the param cnt get
negative value, then ratio+cnt would overflow and may happen to be zero.
As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero.

In some old kernels, such as 2.6.32, there is a bug that would
pass negative param, which then ultimately leads to this divide error.

commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count
with skb MSS) fixed the negative param issue. However,
it's safe that we fix the range of delayed_ack as well,
to make sure we do not hit a divide by zero.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Liu Yu <allanyuliu@tencent.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "macvlan : fix checksums error when we are in bridge mode"

[ Upstream commit f114890cdf84d753f6b41cd0cc44ba51d16313da ]

This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019.
The commit above doesn't appear to be necessary any more as the
checksums appear to be correctly computed/validated.

Additionally the above commit breaks kvm configurations where
one VM is using a device that support checksum offload (virtio) and
the other VM does not.
In this case, packets leaving virtio device will have CHECKSUM_PARTIAL
set.  The packets is forwarded to a macvtap that has offload features
turned off.  Since we use CHECKSUM_UNNECESSARY, the host does does not
update the checksum and thus a bad checksum is passed up to
the guest.

CC: Daniel Lezcano <daniel.lezcano@free.fr>
CC: Patrick McHardy <kaber@trash.net>
CC: Andrian Nord <nightnord@gmail.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set

[ Upstream commit c53864fd60227de025cb79e05493b13f69843971 ]

Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with
buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST
attribute if they were solicited by a GETLINK message containing an
IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag.

That was done because some user programs broke when they received more data
than expected - because IFLA_VFINFO_LIST contains information for each VF
it can become large if there are many VFs.

However, the IFLA_VF_PORTS attribute, supplied for devices which implement
ndo_get_vf_port (currently the 'enic' driver only), has the same problem.
It supplies per-VF information and can therefore become large, but it is
not currently conditional on the IFLA_EXT_MASK value.

Worse, it interacts badly with the existing EXT_MASK handling.  When
IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at
NLMSG_GOODSIZE.  If the information for IFLA_VF_PORTS exceeds this, then
rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet.
netlink_dump() will misinterpret this as having finished the listing and
omit data for this interface and all subsequent ones.  That can cause
getifaddrs(3) to enter an infinite loop.

This patch addresses the problem by only supplying IFLA_VF_PORTS when
IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: Warn when interface's information won't fit in our packet

[ Upstream commit 973462bbde79bb827824c73b59027a0aed5c9ca6 ]

Without IFLA_EXT_MASK specified, the information reported for a single
interface in response to RTM_GETLINK is expected to fit within a netlink
packet of NLMSG_GOODSIZE.

If it doesn't, however, things will go badly wrong,  When listing all
interfaces, netlink_dump() will incorrectly treat -EMSGSIZE on the first
message in a packet as the end of the listing and omit information for
that interface and all subsequent ones.  This can cause getifaddrs(3) to
enter an infinite loop.

This patch won't fix the problem, but it will WARN_ON() making it easier to
track down what's going wrong.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled

The patch fixes a problem with dropped jumbo frames after usage of
'ethtool -G ... rx'.

Scenario:
1. ip link set eth0 up
2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo
3. ip link set mtu 9000 dev eth0

The ethtool command set rx_jumbo_pending to zero so any received jumbo
packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N'
to workaround the issue.
The patch changes the logic so rx_jumbo_pending value is changed only if
jumbo frames are enabled (MTU > 1500).

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

filter: prevent nla extensions to peek beyond the end of the message

[ Upstream commit 05ab8f2647e4221cbdb3856dd7d32bd5407316b3 ]

The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check
for a minimal message length before testing the supplied offset to be
within the bounds of the message. This allows the subtraction of the nla
header to underflow and therefore -- as the data type is unsigned --
allowing far to big offset and length values for the search of the
netlink attribute.

The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is
also wrong. It has the minuend and subtrahend mixed up, therefore
calculates a huge length value, allowing to overrun the end of the
message while looking for the netlink attribute.

The following three BPF snippets will trigger the bugs when attached to
a UNIX datagram socket and parsing a message with length 1, 2 or 3.

 ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]--
 | ld #0x87654321
 | ldx #42
 | ld #nla
 | ret a
 `---

 ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]--
 | ld #0x87654321
 | ldx #42
 | ld #nlan
 | ret a
 `---

 ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]--
 | ; (needs a fake netlink header at offset 0)
 | ld #0
 | ldx #42
 | ld #nlan
 | ret a
 `---

Fix the first issue by ensuring the message length fulfills the minimal
size constrains of a nla header. Fix the second bug by getting the math
for the remainder calculation right.

Fixes: 4738c1db15 ("[SKFILTER]: Add SKF_ADF_NLATTR instruction")
Fixes: d214c7537b ("filter: add SKF_AD_NLATTR_NEST to look for nested..")
Cc: Patrick McHardy <kaber@trash.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: current group_info should be put after using.

[ Upstream commit b04c46190219a4f845e46a459e3102137b7f6cac ]

Plug a group_info refcount leak in ping_init.
group_info is only needed during initialization and
the code failed to release the reference on exit.
While here move grabbing the reference to a place
where it is actually needed.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Signed-off-by: xiaoming wang <xiaoming.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Limit mtu to 65575 bytes

[ Upstream commit 30f78d8ebf7f514801e71b88a10c948275168518 ]

Francois reported that setting big mtu on loopback device could prevent
tcp sessions making progress.

We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets.

We must limit the IPv6 MTU to (65535 + 40) bytes in theory.

Tested:

ifconfig lo mtu 70000
netperf -H ::1

Before patch : Throughput :   0.05 Mbits

After patch : Throughput : 35484 Mbits

Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: Remove debug_fs files when module init fails

[ Upstream commit db29868653394937037d71dc3545768302dda643 ]

Remove the bonding debug_fs entries when the
module initialization fails. The debug_fs
entries should be removed together with all other
already allocated resources.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: core: don't account for udp header size when computing seglen

[ Upstream commit 6d39d589bb76ee8a1c6cde6822006ae0053decff ]

In case of tcp, gso_size contains the tcpmss.

For UFO (udp fragmentation offloading) skbs, gso_size is the fragment
payload size, i.e. we must not account for udp header size.

Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet
will be needlessly fragmented in the forward path, because we think its
individual segments are too large for the outgoing link.

Fixes: fe6cc55f3a9a053 ("net: ip, ipv6: handle gso skbs in forwarding path")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: take PMTU from tunnel UDP socket

[ Upstream commit f34c4a35d87949fbb0e0f31eba3c054e9f8199ba ]

When l2tp driver tries to get PMTU for the tunnel destination, it uses
the pointer to struct sock that represents PPPoX socket, while it
should use the pointer that represents UDP socket of the tunnel.

Signed-off-by: Dmitry Petukhov <dmgenp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sctp: test if association is dead in sctp_wake_up_waiters

[ Upstream commit 1e1cdf8ac78793e0875465e98a648df64694a8d0 ]

In function sctp_wake_up_waiters(), we need to involve a test
if the association is declared dead. If so, we don't have any
reference to a possible sibling association anymore and need
to invoke sctp_write_space() instead, and normally walk the
socket's associations and notify them of new wmem space. The
reason for special casing is that otherwise, we could run
into the following issue when a sctp_primitive_SEND() call
from sctp_sendmsg() fails, and tries to flush an association's
outq, i.e. in the following way:

sctp_association_free()
`-> list_del(&asoc->asocs)         <-- poisons list pointer
    asoc->base.dead = true
    sctp_outq_free(&asoc->outqueue)
    `-> __sctp_outq_teardown()
     `-> sctp_chunk_free()
      `-> consume_skb()
       `-> sctp_wfree()
        `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers
                                       if asoc->ep->sndbuf_policy=0

Therefore, only walk the list in an 'optimized' way if we find
that the current association is still active. We could also use
list_del_init() in addition when we call sctp_association_free(),
but as Vlad suggests, we want to trap such bugs and thus leave
it poisoned as is.

Why is it safe to resolve the issue by testing for asoc->base.dead?
Parallel calls to sctp_sendmsg() are protected under socket lock,
that is lock_sock()/release_sock(). Only within that path under
lock held, we're setting skb/chunk owner via sctp_set_owner_w().
Eventually, chunks are freed directly by an association still
under that lock. So when traversing association list on destruction
time from sctp_wake_up_waiters() via sctp_wfree(), a different
CPU can't be running sctp_wfree() while another one calls
sctp_association_free() as both happens under the same lock.
Therefore, this can also not race with setting/testing against
asoc->base.dead as we are guaranteed for this to happen in order,
under lock. Further, Vlad says: the times we check asoc->base.dead
is when we've cached an association pointer for later processing.
In between cache and processing, the association may have been
freed and is simply still around due to reference counts. We check
asoc->base.dead under a lock, so it should always be safe to check
and not race against sctp_association_free(). Stress-testing seems
fine now, too.

Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sctp: wake up all assocs if sndbuf policy is per socket

[ Upstream commit 52c35befb69b005c3fc5afdaae3a5717ad013411 ]

SCTP charges chunks for wmem accounting via skb->truesize in
sctp_set_owner_w(), and sctp_wfree() respectively as the
reverse operation. If a sender runs out of wmem, it needs to
wait via sctp_wait_for_sndbuf(), and gets woken up by a call
to __sctp_write_space() mostly via sctp_wfree().

__sctp_write_space() is being called per association. Although
we assign sk->sk_write_space() to sctp_write_space(), which
is then being done per socket, it is only used if send space
is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE
is set and therefore not invoked in sock_wfree().

Commit 4c3a5bdae293 ("sctp: Don't charge for data in sndbuf
again when transmitting packet") fixed an issue where in case
sctp_packet_transmit() manages to queue up more than sndbuf
bytes, sctp_wait_for_sndbuf() will never be woken up again
unless it is interrupted by a signal. However, a still
remaining issue is that if net.sctp.sndbuf_policy=0, that is
accounting per socket, and one-to-many sockets are in use,
the reclaimed write space from sctp_wfree() is 'unfairly'
handed back on the server to the association that is the lucky
one to be woken up again via __sctp_write_space(), while
the remaining associations are never be woken up again
(unless by a signal).

The effect disappears with net.sctp.sndbuf_policy=1, that
is wmem accounting per association, as it guarantees a fair
share of wmem among associations.

Therefore, if we have reclaimed memory in case of per socket
accounting, wake all related associations to a socket in a
fair manner, that is, traverse the socket association list
starting from the current neighbour of the association and
issue a __sctp_write_space() to everyone until we end up
waking ourselves. This guarantees that no association is
preferred over another and even if more associations are
taken into the one-to-many session, all receivers will get
messages from the server and are not stalled forever on
high load. This setting still leaves the advantage of per
socket accounting in touch as an association can still use
up global limits if unused by others.

Fixes: 4eb701dfc618 ("[SCTP] Fix SCTP sendbuffer accouting.")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

list: introduce list_next_entry() and list_prev_entry()

[ Upstream commit 008208c6b26f21c2648c250a09c55e737c02c5f8 ]

Add two trivial helpers list_next_entry() and list_prev_entry(), they
can have a lot of users including list.h itself.  In fact the 1st one is
already defined in events/core.c and bnx2x_sp.c, so the patch simply
moves the definition to list.h.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: call drm_edid_to_eld when we update the edid

commit 16086279353cbfecbb3ead474072dced17b97ddc upstream.

This needs to be done to update some of the fields in
the connector structure used by the audio code.

Noticed by several users on irc.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: correct fb_fix_screeninfo.line_length

commit aa6de142c901cd2d90ef08db30ae87da214bedcc upstream.

Previously, the vmwgfx_fb driver would allow users to call FBIOSET_VINFO, but it would not adjust
the FINFO properly, resulting in distorted screen rendering. The patch corrects that behaviour.

See https://bugs.gentoo.org/show_bug.cgi?id=494794 for examples.

Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add and update a number of CMOTech devices

commit 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b upstream.

A number of older CMOTech modems are based on Qualcomm
chips.  The blacklisted interfaces are QMI/wwan.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add Alcatel L800MA

commit dd6b48ecec2ea7d15f28d5e5474388681899a5e1 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/00/00 - serial AT+PPP
2: ff/ff/ff - QMI/wwan
3: 08/06/50 - storage

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add Olivetti Olicard 500

commit 533b3994610f316e5cd61b56d0c4daa15c830f89 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/ff/ff - serial AT+PPP
2: 08/06/50 - storage
3: ff/ff/ff - serial
4: ff/ff/ff - QMI/wwan

Reported-by: Julio Araujo <julio.araujo@wllctel.com.br>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: io_ti: fix firmware download on big-endian machines

commit 5509076d1b4485ce9fb07705fcbcd2695907ab5b upstream.

During firmware download the device expects memory addresses in
big-endian byte order. As the wIndex parameter which hold the address is
sent in little-endian byte order regardless of host byte order, we need
to use swab16 rather than cpu_to_be16.

Also make sure to handle the struct ti_i2c_desc size parameter which is
returned in little-endian byte order.

Reported-by: Ludovic Drolez <ldrolez@debian.org>
Tested-by: Ludovic Drolez <ldrolez@debian.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "USB: serial: add usbid for dell wwan card to sierra.c"

commit 2e01280d2801c72878cf3a7119eac30077b463d5 upstream.

This reverts commit 1ebca9dad5abe8b2ed4dbd186cd657fb47c1f321.

This device was erroneously added to the sierra driver even though it's
not a Sierra device and was already handled by the option driver.

Cc: Richard Farina <sidhayn@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option driver, add support for Telit UE910v2

commit d6de486bc22255779bd54b0fceb4c240962bf146 upstream.

option driver, added VID/PID for Telit UE910v2 modem

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add id for Brainboxes serial cards

commit efe26e16b1d93ac0085e69178cc18811629e8fc5 upstream.

Custom VID/PIDs for Brainboxes cards as reported in
https://bugzilla.redhat.com/show_bug.cgi?id=1071914

Signed-off-by: Michele Baldessari <michele@acksyn.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cp210x: Add 8281 (Nanotec Plug & Drive)

commit 72b3007951010ce1bbf950e23b19d9839fa905a5 upstream.

Signed-off-by: Tristan Bruns <tristan@tristanbruns.de>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driver

commit 895d240d1db0b2736d779200788e4c4aea28a0c6 upstream.

By specifying NO_UNION_NORMAL the ACM driver does only use the first two
USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA
interfaces are left to the USB serial driver.

Signed-off-by: Michael Ulbricht <michael.ulbricht@systec-electronic.com>
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()

commit 7848a4bf51b34f41fcc9bd77e837126d99ae84e3 upstream.

soft lockup in freeing gigantic hugepage fixed in commit 55f67141a892 "mm:
hugetlb: fix softlockup when a large number of hugepages are freed." can
happen in return_unused_surplus_pages(), so let's fix it.

Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix epoll_pwait syscall on compat kernel

commit ab3e55b119c9653b19ea4edffb86f04db867ac98 upstream.

This bug was detected with the libio-epoll-perl debian package where the
test case IO-Ppoll-compat.t failed.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.91

tgafb: fix mode setting with fbset

commit 624966589041deb32a2626ee2e176e8274581101 upstream.

Mode setting in the TGA driver is broken for these reasons:

- info->fix.line_length is set just once in tgafb_init_fix function. If
  we change videomode, info->fix.line_length is not recalculated - so
  the video mode is changed but the screen is corrupted because of wrong
  info->fix.line_length.

- info->fix.smem_len is set in tgafb_init_fix to the size of the default
  video mode (640x480). If we set a higher resolution,
  info->fix.smem_len is smaller than the current screen size, preventing
  the userspace program from mapping the framebuffer.

This patch fixes it:

- info->fix.line_length initialization is moved to tgafb_set_par so that
  it is recalculated with each mode change.

- info->fix.smem_len is set to a fixed value representing the real
  amount of video ram (the values are taken from xfree86 driver).

- add a check to tgafb_check_var to prevent us from setting a videomode
  that doesn't fit into videoram.

- in tgafb_register, tgafb_init_fix is moved upwards, to be called
  before fb_find_mode (because fb_find_mode already needs the videoram
  size set in tgafb_init_fix).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Add vr save/restore functions

commit 8fe9c93e7453e67b8bd09f263ec1bb0783c733fc upstream.

GCC 4.8 now generates out-of-line vr save/restore functions when
optimizing for size.  They are needed for the raid6 altivec support.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracepoint: Do not waste memory on mods with no tracepoints

commit 7dec935a3aa04412cba2cebe1524ae0d34a30c24 upstream.

No reason to allocate tp_module structures for modules that have no
tracepoints. This just wastes memory.

Fixes: b75ef8b44b1c "Tracepoint: Dissociate from module mutex"
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: Can't fail and free after table replacement

commit c58dd2dd443c26d856a168db108a0cd11c285bf3 upstream.

All xtables variants suffer from the defect that the copy_to_user()
to copy the counters to user memory may fail after the table has
already been exchanged and thus exposed. Return an error at this
point will result in freeing the already exposed table. Any
subsequent packet processing will result in a kernel panic.

We can't copy the counters before exposing the new tables as we
want provide the counter state after the old table has been
unhooked. Therefore convert this into a silent error.

Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Add net_ratelimited_function and net_<level>_ratelimited macros

commit 3a3bfb61e64476ff1e4ac3122cb6dec9c79b795c upstream.

__ratelimit() can be considered an inverted bool test because
it returns true when not ratelimited.  Several tests in the
kernel tree use this __ratelimit() function incorrectly.

No net_ratelimit uses are incorrect currently though.

Most uses of net_ratelimit are to log something via printk or
pr_<level>.

In order to minimize the uses of net_ratelimit, and to start
standardizing the code style used for __ratelimit() and net_ratelimit(),
add a net_ratelimited_function() macro and net_<level>_ratelimited()
logging macros similar to pr_<level>_ratelimited that use the global
net_ratelimit instead of a static per call site "struct ratelimit_state".

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_conntrack: reserve two bytes for nf_ct_ext->len

commit 223b02d923ecd7c84cf9780bb3686f455d279279 upstream.

"len" contains sizeof(nf_ct_ext) and size of extensions. In a worst
case it can contain all extensions. Bellow you can find sizes for all
types of extensions. Their sum is definitely bigger than 256.

nf_ct_ext_types[0]->len = 24
nf_ct_ext_types[1]->len = 32
nf_ct_ext_types[2]->len = 24
nf_ct_ext_types[3]->len = 32
nf_ct_ext_types[4]->len = 152
nf_ct_ext_types[5]->len = 2
nf_ct_ext_types[6]->len = 16
nf_ct_ext_types[7]->len = 8

I have seen "len" up to 280 and my host has crashes w/o this patch.

The right way to fix this problem is reducing the size of the ecache
extension (4) and Florian is going to do this, but these changes will
be quite large to be appropriate for a stable tree.

Fixes: 5b423f6a40a0 (netfilter: nf_conntrack: fix racy timer handling with reliable)
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blktrace: fix accounting of partially completed requests

commit af5040da01ef980670b3741b3e10733ee3e33566 upstream.

trace_block_rq_complete does not take into account that request can
be partially completed, so we can get the following incorrect output
of blkparser:

  C   R 232 + 240 [0]
  C   R 240 + 232 [0]
  C   R 248 + 224 [0]
  C   R 256 + 216 [0]

but should be:

  C   R 232 + 8 [0]
  C   R 240 + 8 [0]
  C   R 248 + 8 [0]
  C   R 256 + 8 [0]

Also, the whole output summary statistics of completed requests and
final throughput will be incorrect.

This patch takes into account real completion size of the request and
fixes wrong completion accounting.

Signed-off-by: Roman Pen <r.peniaev@gmail.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fix n_tty_write crash when echoing in raw mode

commit 4291086b1f081b869c6d79e5b7441633dc3ace00 upstream.

The tty atomic_write_lock does not provide an exclusion guarantee for
the tty driver if the termios settings are LECHO & !OPOST.  And since
it is unexpected and not allowed to call TTY buffer helpers like
tty_insert_flip_string concurrently, this may lead to crashes when
concurrect writers call pty_write. In that case the following two
writers:
* the ECHOing from a workqueue and
* pty_write from the process
race and can overflow the corresponding TTY buffer like follows.

If we look into tty_insert_flip_string_fixed_flag, there is:
  int space = __tty_buffer_request_room(port, goal, flags);
  struct tty_buffer *tb = port->buf.tail;
  ...
  memcpy(char_buf_ptr(tb, tb->used), chars, space);
  ...
  tb->used += space;

so the race of the two can result in something like this:
              A                                B
__tty_buffer_request_room
                                  __tty_buffer_request_room
memcpy(buf(tb->used), ...)
tb->used += space;
                                  memcpy(buf(tb->used), ...) ->BOOM

B's memcpy is past the tty_buffer due to the previous A's tb->used
increment.

Since the N_TTY line discipline input processing can output
concurrently with a tty write, obtain the N_TTY ldisc output_lock to
serialize echo output with normal tty writes.  This ensures the tty
buffer helper tty_insert_flip_string is not called concurrently and
everything is fine.

Note that this is nicely reproducible by an ordinary user using
forkpty and some setup around that (raw termios + ECHO). And it is
present in kernels at least after commit
d945cb9cce20ac7143c2de8d88b187f62db99bdc (pty: Rework the pty layer to
use the normal buffering logic) in 2.6.31-rc3.

js: add more info to the commit log
js: switch to bool
js: lock unconditionally
js: lock only the tty->ops->write call

References: CVE-2014-0196
Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: output_lock is a member of struct tty_struct]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

SCSI: megaraid: missing bounds check in mimd_to_kioc()

commit 3de2260140417759c669d391613d583baf03b0cf upstream.

pthru32->dataxferlen comes from the user so we need to check that it's
not too large so we don't overflow the buffer.

Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.90

dm thin: fix dangling bio in process_deferred_bios error path

commit fe76cd88e654124d1431bb662a0fc6e99ca811a5 upstream.

If unable to ensure_next_mapping() we must add the current bio, which
was removed from the @bios list via bio_list_pop, back to the
deferred_bios list before all the remaining @bios.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Skip intel_crt_init for Dell XPS 8700

commit 10b6ee4a87811a110cb01eaca01eb04da6801baf upstream.

The Dell XPS 8700 has a onboard Display port and HDMI port and no VGA port.
The call intel_crt_init freeze the machine, so skip such call.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73559
Signed-off-by: Giacomo Comes <comes at naic.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: sm_ftl: heap corruption in sm_create_sysfs_attributes()

commit b4c233057771581698a13694ab6f33b48ce837dc upstream.

We always put a NUL terminator one space past the end of the "vendor"
buffer.  Walter Harms also pointed out that this should just use
kstrndup().

Fixes: 7d17c02a01a1 ('mtd: Add new SmartMedia/xD FTL')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nuc900_nand: NULL dereference in nuc900_nand_enable()

commit c69dbbf3335a21aae74376d7e5db50a486d52439 upstream.

Instead of writing to "nand->reg + REG_FMICSR" we write to "REG_FMICSR"
which is NULL and not a valid register.

Fixes: 8bff82cbc308 ('mtd: add nand support for w90p910 (v2)')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tgafb: fix data copying

commit 6b0df6827bb6fcacb158dff29ad0a62d6418b534 upstream.

The functions for data copying copyarea_foreward_8bpp and
copyarea_backward_8bpp are buggy, they produce screen corruption.

This patch fixes the functions and moves the logic to one function
"copyarea_8bpp". For simplicity, the function only handles copying that
is aligned on 8 pixes. If we copy an unaligned area, generic function
cfb_copyarea is used.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mxs: Allow for recursive enable_irq_wake() call

commit a585f87c863e4e1d496459d382b802bf5ebe3717 upstream.

The scenario here is that someone calls enable_irq_wake() from somewhere
in the code. This will result in the lockdep producing a backtrace as can
be seen below. In my case, this problem is triggered when using the wl1271
(TI WlCore) driver found in drivers/net/wireless/ti/ .

The problem cause is rather obvious from the backtrace, but let's outline
the dependency. enable_irq_wake() grabs the IRQ buslock in irq_set_irq_wake(),
which in turns calls mxs_gpio_set_wake_irq() . But mxs_gpio_set_wake_irq()
calls enable_irq_wake() again on the one-level-higher IRQ , thus it tries to
grab the IRQ buslock again in irq_set_irq_wake() . Because the spinlock in
irq_set_irq_wake()->irq_get_desc_buslock()->__irq_get_desc_lock() is not
marked as recursive, lockdep will spew the stuff below.

We know we can safely re-enter the lock, so use IRQ_GC_INIT_NESTED_LOCK to
fix the spew.

 =============================================
 [ INFO: possible recursive locking detected ]
 3.10.33-00012-gf06b763-dirty #61 Not tainted
 ---------------------------------------------
 kworker/0:1/18 is trying to acquire lock:
  (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88

 but task is already holding lock:
  (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 3 locks held by kworker/0:1/18:
  #0:  (events){.+.+.+}, at: [<c0036308>] process_one_work+0x134/0x4a4
  #1:  ((&fw_work->work)){+.+.+.}, at: [<c0036308>] process_one_work+0x134/0x4a4
  #2:  (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88

 stack backtrace:
 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 3.10.33-00012-gf06b763-dirty #61
 Workqueue: events request_firmware_work_func
 [<c0013eb4>] (unwind_backtrace+0x0/0xf0) from [<c0011c74>] (show_stack+0x10/0x14)
 [<c0011c74>] (show_stack+0x10/0x14) from [<c005bb08>] (__lock_acquire+0x140c/0x1a64)
 [<c005bb08>] (__lock_acquire+0x140c/0x1a64) from [<c005c6a8>] (lock_acquire+0x9c/0x104)
 [<c005c6a8>] (lock_acquire+0x9c/0x104) from [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58)
 [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c00685f0>] (__irq_get_desc_lock+0x48/0x88)
 [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) from [<c0068e78>] (irq_set_irq_wake+0x20/0xf4)
 [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) from [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24)
 [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) from [<c0068cf4>] (set_irq_wake_real+0x30/0x44)
 [<c0068cf4>] (set_irq_wake_real+0x30/0x44) from [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4)
 [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) from [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c)
 [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) from [<c02be5e8>] (request_firmware_work_func+0x38/0x58)
 [<c02be5e8>] (request_firmware_work_func+0x38/0x58) from [<c0036394>] (process_one_work+0x1c0/0x4a4)
 [<c0036394>] (process_one_work+0x1c0/0x4a4) from [<c0036a4c>] (worker_thread+0x138/0x394)
 [<c0036a4c>] (worker_thread+0x138/0x394) from [<c003cb74>] (kthread+0xa4/0xb0)
 [<c003cb74>] (kthread+0xa4/0xb0) from [<c000ee00>] (ret_from_fork+0x14/0x34)
 wlcore: loaded

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192se: Fix too long disable of IRQs

commit 2610decdd0b3808ba20471a999835cfee5275f98 upstream.

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192se.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix too long disable of IRQs

commit a53268be0cb9763f11da4f6fe3fb924cbe3a7d4a upstream.

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192cu.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locks: allow __break_lease to sleep even when break_time is 0

commit 4991a628a789dc5954e98e79476d9808812292ec upstream.

A fl->fl_break_time of 0 has a special meaning to the lease break code
that basically means "never break the lease". knfsd uses this to ensure
that leases don't disappear out from under it.

Unfortunately, the code in __break_lease can end up passing this value
to wait_event_interruptible as a timeout, which prevents it from going
to sleep at all. This causes __break_lease to spin in a tight loop and
causes soft lockups.

Fix this by ensuring that we pass a minimum value of 1 as a timeout
instead.

Cc: J. Bruce Fields <bfields@fieldses.org>
Reported-by: Terry Barnaby <terry1@beam.ltd.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata/ahci: accommodate tag ordered controllers

commit 8a4aeec8d2d6a3edeffbdfae451cdf05cbf0fefd upstream.

The AHCI spec allows implementations to issue commands in tag order
rather than FIFO order:

5.3.2.12 P:SelectCmd
HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1)
or HBA selects the command to issue that has had the
PxCI bit set to '1' longer than any other command
pending to be issued.

The result is that commands posted sequentially (time-wise) may play out
of sequence when issued by hardware.

This behavior has likely been hidden by drives that arrange for commands
to complete in issue order.  However, it appears recent drives (two from
different vendors that we have found so far) inflict out-of-order
completions as a matter of course.  So, we need to take care to maintain
ordered submission, otherwise we risk triggering a drive to fall out of
sequential-io automation and back to random-io processing, which incurs
large latency and degrades throughput.

This issue was found in simple benchmarks where QD=2 seq-write
performance was 30-50% *greater* than QD=32 seq-write performance.

Tagging for -stable and making the change globally since it has a low
risk-to-reward ratio.  Also, word is that recent versions of an unnamed
OS also does it this way now.  So, drives in the field are already
experienced with this tag ordering scheme.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ed Ciechanowski <ed.ciechanowski@intel.com>
Reviewed-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43: Fix machine check error due to improper access of B43_MMIO_PSM_PHY_HDR

commit 12cd43c6ed6da7bf7c5afbd74da6959cda6d056b upstream.

Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b
functions isn't safe. On my machine it causes delayed (!) CPU exception:

Disabling lock debugging due to kernel taint
mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f
mce: [Hardware Error]: TSC 164083803dc
mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Processor context corrupt
Kernel panic - not syncing: Fatal machine check on current CPU
Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mach64: fix cursor when character width is not a multiple of 8 pixels

commit 43751a1b8ee2e70ce392bf31ef3133da324e68b3 upstream.

This patch fixes the hardware cursor on mach64 when font width is not a
multiple of 8 pixels.

If you load such a font, the cursor is expanded to the next 8-byte
boundary and a part of the next character after the cursor is not
visible.
For example, when you load a font with 12-pixel width, the cursor width
is 16 pixels and when the cursor is displayed, 4 pixels of the next
character are not visible.

The reason is this: atyfb_cursor is called with proper parameters to
load an image that is 12-pixel wide. However, the number is aligned on
the next 8-pixel boundary on the line
"unsigned int width = (cursor->image.width + 7) >> 3;" and the whole
function acts as it is was loading a 16-pixel image.

This patch fixes it so that the value written to the framebuffer is
padded with 0xaaaa (the transparent pattern) when the image size it not
a multiple of 8 pixels. The transparent pattern causes that the cursor
will not interfere with the next character.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mach64: use unaligned access

commit c29dd8696dc5dbd50b3ac441b8a26751277ba520 upstream.

This patch fixes mach64 to use unaligned access to the font bitmap.

This fixes unaligned access warning on sparc64 when 14x8 font is loaded.

On x86(64), unaligned access is handled in hardware, so both functions
le32_to_cpup and get_unaligned_le32 perform the same operation.

On RISC machines, unaligned access is not handled in hardware, so we
better use get_unaligned_le32 to avoid the unaligned trap and warning.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

matroxfb: restore the registers M_ACCESS and M_PITCH

commit a772d4736641ec1b421ad965e13457c17379fc86 upstream.

When X11 is running and the user switches back to console, the card
modifies the content of registers M_MACCESS and M_PITCH in periodic
intervals.

This patch fixes it by restoring the content of these registers before
issuing any accelerator command.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

framebuffer: fix cfb_copyarea

commit 00a9d699bc85052d2d3ed56251cd928024ce06a3 upstream.

The function cfb_copyarea is buggy when the copy operation is not aligned on
long boundary (4 bytes on 32-bit machines, 8 bytes on 64-bit machines).

How to reproduce:
- use x86-64 machine
- use a framebuffer driver without acceleration (for example uvesafb)
- set the framebuffer to 8-bit depth
(for example fbset -a 1024x768-60 -depth 8)
- load a font with character width that is not a multiple of 8 pixels
note: the console-tools package cannot load a font that has
width different from 8 pixels. You need to install the packages
"kbd" and "console-terminus" and use the program "setfont" to
set font width (for example: setfont Uni2-Terminus20x10)
- move some text left and right on the bash command line and you get a
screen corruption

To expose more bugs, put this line to the end of uvesafb_init_info:
info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_READS_FAST;
- Now framebuffer console will use cfb_copyarea for console scrolling.
You get a screen corruption when console is scrolled.

This patch is a rewrite of cfb_copyarea. It fixes the bugs, with this
patch, console scrolling in 8-bit depth with a font width that is not a
multiple of 8 pixels works fine.

The cfb_copyarea code was very buggy and it looks like it was written
and never tried with non-8-pixel font.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ghash-clmulni-intel - use C implementation for setkey()

commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream.

The GHASH setkey() function uses SSE registers but fails to call
kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and
then having to deal with the restriction that they cannot be called from
interrupt context, move the setkey() implementation to the C domain.

Note that setkey() does not use any particular SSE features and is not
expected to become a performance bottleneck.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpt2sas: Don't disable device twice at suspend.

commit af61e27c3f77c7623b5335590ae24b6a5c323e22 upstream.

On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which
in turn calls pci_disable_device if the device is enabled prior to
suspending. However, _scsih_suspend also calls pci_disable_device
itself.

Thus, in the event that the device is enabled prior to suspending,
pci_disable_device will be called twice. This patch removes the
duplicate call to pci_disable_device in _scsi_suspend as it is both
unnecessary and results in a kernel oops.

Signed-off-by: Tyler Stachecki <tstache1@binghamton.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: don't softlockup on huge balloon changes.

commit 1f74ef0f2d7d692fcd615621e0e734c3e7771413 upstream.

When adding or removing 100G from a balloon:

    BUG: soft lockup - CPU#0 stuck for 22s! [vballoon:367]

We have a wait_event_interruptible(), but the condition is always true
(more ballooning to do) so we don't ever sleep.  We also have a
wait_event() for the host to ack, but that is also always true as QEMU
is synchronous for balloon operations.

Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Hibernate: Flush TLB entries in swsusp_arch_resume()

commit c14af233fbe279d0e561ecf84f1208b1bae087ef upstream.

The original MIPS hibernate code flushes cache and TLB entries in
swsusp_arch_resume(). But they are removed in Commit 44eeab67416711
(MIPS: Hibernation: Remove SMP TLB and cacheflushing code.). A cross-
CPU flush is surely unnecessary because all but the local CPU have
already been disabled. But a local flush (at least the TLB flush) is
needed. When we do hibernation on Loongson-3 with an E1000E NIC, it is
very easy to produce a kernel panic (kernel page fault, or unaligned
access). The root cause is E1000E driver use vzalloc_node() to allocate
pages, the stale TLB entries of the booting kernel will be misused by
the resumed target kernel.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6643/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

floppy: don't write kernel-only members to FDRAWCMD ioctl output

commit 2145e15e0557a01b9195d1c7199a1b92cb9be81f upstream.

Do not leak kernel-only floppy_raw_cmd structure members to userspace.
This includes the linked-list pointer and the pointer to the allocated
DMA space.

Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

floppy: ignore kernel-only members in FDRAWCMD ioctl input

commit ef87dbe7614341c2e7bfe8d32fcb7028cc97442c upstream.

Always clear out these floppy_raw_cmd struct members after copying the
entire structure from userspace so that the in-kernel version is always
valid and never left in an interdeterminate state.

Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/hvc: don't free hvc_console_setup after init

commit 501fed45b7e8836ee9373f4d31e2d85e3db6103a upstream.

When 'console=hvc0' is specified to the kernel parameter in x86 KVM guest,
hvc console is setup within a kthread. However, that will cause SEGV
and the boot will fail when the driver is builtin to the kernel,
because currently hvc_console_setup() is annotated with '__init'. This
patch removes '__init' to boot the guest successfully with 'console=hvc0'.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.89

USB: pl2303: add ids for Hewlett-Packard HP POS pole displays

commit b16c02fbfb963fa2941b7517ebf1f8a21946775e upstream.

Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays:

LD960: 03f0:0B39
LCM220: 03f0:3139
LCM960: 03f0:3239

[ Johan: fix indentation and sort PIDs numerically ]

Signed-off-by: Aaron Sanders <aaron.sanders@hp.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use i_size_read in ext4_unaligned_aio()

commit 6e6358fc3c3c862bfe9a5bc029d3f8ce43dc9765 upstream.

We haven't taken i_mutex yet, so we need to use i_size_read().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: do not put bh when buffer_uptodate failed

commit f7cf4f5bfe073ad792ab49c04f247626b3e38db6 upstream.

Do not put bh when buffer_uptodate failed in ocfs2_write_block and
ocfs2_write_super_or_backup, because it will put bh in b_end_io.
Otherwise it will hit a warning "VFS: brelse: Trying to free free
buffer".

Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: dlm: fix recovery hung

commit ded2cf71419b9353060e633b59e446c42a6a2a09 upstream.

There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the
recovery process for a dead node.  After the master sends FINALIZE_RECO
message in dlm_remaster_locks(), another node may become the recovery
master for another dead node, and then send the BEGIN_RECO message to
all the nodes included the old master, in the handler of this message
dlm_begin_reco_handler() of old master, dlm->reco.dead_node and
dlm->reco.new_master will be set to the second dead node and the new
master, then in dlm_reset_recovery(), these two variables will be reset
to default value.  This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for
recovery.

old recovery master:                                 new recovery master:
dlm_remaster_locks()
                                                  become recovery master for
                                                  another dead node.
                                                  dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{
 if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
  return -EAGAIN;
 }
 dlm_set_reco_master(dlm, br->node_idx);
 dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
 dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
 dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
                                                  will hang in dlm_remaster_locks() for
                                                  request dlm locks info

Before send FINALIZE_RECO message, recovery master should set
DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done,
this can break the race windows as the BEGIN_RECO messages will not be
handled before DLM_RECO_STATE_FINALIZE flag is cleared.

A similar race may happen between new recovery master and normal node
which is in dlm_finalize_reco_handler(), also fix it.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: dlm: fix lock migration crash

commit 34aa8dac482f1358d59110d5e3a12f4351f6acaa upstream.

This issue was introduced by commit 800deef3f6f8 ("ocfs2: use
list_for_each_entry where benefical") in 2007 where it replaced
list_for_each with list_for_each_entry.  The variable "lock" will point
to invalid data if "tmpq" list is empty and a panic will be triggered
due to this.  Sunil advised reverting it back, but the old version was
also not right.  At the end of the outer for loop, that
list_for_each_entry will also set "lock" to an invalid data, then in the
next loop, if the "tmpq" list is empty, "lock" will be an stale invalid
data and cause the panic.  So reverting the list_for_each back and reset
"lock" to NULL to fix this issue.

Another concern is that this seemes can not happen because the "tmpq"
list should not be empty.  Let me describe how.

old lock resource owner(node 1):                                  migratation target(node 2):
image there's lockres with a EX lock from node 2 in
granted list, a NR lock from node x with convert_type
EX in converting list.
dlm_empty_lockres() {
 dlm_pick_migration_target() {
   pick node 2 as target as its lock is the first one
   in granted list.
 }
 dlm_migrate_lockres() {
   dlm_mark_lockres_migrating() {
     res->state |= DLM_LOCK_RES_BLOCK_DIRTY;
     wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res));
 //after the above code, we can not dirty lockres any more,
     // so dlm_thread shuffle list will not run
                                                                   downconvert lock from EX to NR
                                                                   upconvert lock from NR to EX
<<< migration may schedule out here, then
<<< node 2 send down convert request to convert type from EX to
<<< NR, then send up convert request to convert type from NR to
<<< EX, at this time, lockres granted list is empty, and two locks
<<< in the converting list, node x up convert lock followed by
<<< node 2 up convert lock.

 // will set lockres RES_MIGRATING flag, the following
 // lock/unlock can not run
     dlm_lockres_release_ast(dlm, res);
   }

   dlm_send_one_lockres()
                                                                 dlm_process_recovery_data()
                                                                   for (i=0; i<mres->num_locks; i++)
                                                                     if (ml->node == dlm->node_num)
                                                                       for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
                                                                        list_for_each_entry(lock, tmpq, list)
                                                                        if (lock) break; <<< lock is invalid as grant list is empty.
                                                                       }
                                                                       if (lock->ml.node != ml->node)
                                                                         BUG() >>> crash here
 }

I see the above locks status from a vmcore of our internal bug.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hung_task: check the value of "sysctl_hung_task_timeout_sec"

commit 80df28476505ed4e6701c3448c63c9229a50c655 upstream.

As sysctl_hung_task_timeout_sec is unsigned long, when this value is
larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in
watchdog will return immediately without sleep and with print :

  schedule_timeout: wrong timeout value ffffffffffffff83

and then the funtion watchdog will call schedule_timeout_interruptible
again and again.  The screen will be filled with

"schedule_timeout: wrong timeout value ffffffffffffff83"

This patch does some check and correction in sysctl, to let the function
schedule_timeout_interruptible allways get the valid parameter.

Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Tested-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix softlockup when a large number of hugepages are freed.

commit 55f67141a8927b2be3e51840da37b8a2320143ed upstream.

When I decrease the value of nr_hugepage in procfs a lot, softlockup
happens.  It is because there is no chance of context switch during this
process.

On the other hand, when I allocate a large number of hugepages, there is
some chance of context switch.  Hence softlockup doesn't happen during
this process.  So it's necessary to add the context switch in the
freeing process as same as allocating process to avoid softlockup.

When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing
process occupied a CPU over 150 seconds and following softlockup message
appeared twice or more.

$ echo 6000000 > /proc/sys/vm/nr_hugepages
$ cat /proc/sys/vm/nr_hugepages
6000000
$ grep ^Huge /proc/meminfo
HugePages_Total:   6000000
HugePages_Free:    6000000
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
$ echo 0 > /proc/sys/vm/nr_hugepages

BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ...
Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1
Call Trace:
  free_pool_huge_page+0xb8/0xd0
  set_max_huge_pages+0x128/0x190
  hugetlb_sysctl_handler_common+0x113/0x140
  hugetlb_sysctl_handler+0x1e/0x20
  proc_sys_call_handler+0x97/0xd0
  proc_sys_write+0x14/0x20
  vfs_write+0xb8/0x1a0
  sys_write+0x51/0x90
  __audit_syscall_exit+0x265/0x290
  system_call_fastpath+0x16/0x1b

I have not confirmed this problem with upstream kernels because I am not
able to prepare the machine equipped with 12TB memory now.  However I
confirmed that the amount of decreasing hugepages was directly
proportional to the amount of required time.

I measured required times on a smaller machine.  It showed 130-145
hugepages decreased in a millisecond.

  Amount of decreasing     Required time      Decreasing rate
  hugepages                     (msec)         (pages/msec)
  ------------------------------------------------------------
  10,000 pages == 20GB         70 -  74          135-142
  30,000 pages == 60GB        208 - 229          131-144

It means decrement of 6TB hugepages will trigger softlockup with the
default threshold 20sec, in this decreasing rate.

Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: fix format string bug in stack tracer

commit a0c32761e73c9999cbf592b702f284221fea8040 upstream.

Kees reported the following error:

   arch/sh/kernel/dumpstack.c: In function 'print_trace_address':
   arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security]

Use the "%s" format so that it's impossible to interpret 'data' as a
format string.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Reported-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: unbind all interfaces before rebinding any

commit 6aec044cc2f5670cf3b143c151c8be846499bd15 upstream.

When a driver doesn't have pre_reset, post_reset, or reset_resume
methods, the USB core unbinds that driver when its device undergoes a
reset or a reset-resume, and then rebinds it afterward.

The existing straightforward implementation can lead to problems,
because each interface gets unbound and rebound before the next
interface is handled.  If a driver claims additional interfaces, the
claim may fail because the old binding instance may still own the
additional interface when the new instance tries to claim it.

This patch fixes the problem by first unbinding all the interfaces
that are marked (i.e., their needs_binding flag is set) and then
rebinding all of them.

The patch also makes the helper functions in driver.c a little more
uniform and adjusts some out-of-date comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: "Poulain, Loic" <loic.poulain@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hvc: ensure hvc_init is only ever called once in hvc_console.c

commit f76a1cbed18c86e2d192455f0daebb48458965f3 upstream.

Commit 3e6c6f630a5282df8f3393a59f10eb9c56536d23 ("Delay creation of
khcvd thread") moved the call of hvc_init from being a device_initcall
into hvc_alloc, and used a non-null hvc_driver as indication of whether
hvc_init had already been called.

The problem with this is that hvc_driver is only assigned a value
at the bottom of hvc_init, and so there is a window where multiple
hvc_alloc calls can be in progress at the same time and hence try
and call hvc_init multiple times.  Previously the use of device_init
guaranteed that hvc_init was only called once.

This manifests itself as sporadic instances of two hvc_init calls
racing each other, and with the loser of the race getting -EBUSY
from tty_register_driver() and hence that virtual console fails:

    Couldn't register hvc console driver
    virtio-ports vport0p1: error -16 allocating hvc for port

Here we add an atomic_t to guarantee we'll never run hvc_init twice.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 3e6c6f630a52 ("Delay creation of khcvd thread")
Reported-by: Jim Somerville <Jim.Somerville@windriver.com>
Tested-by: Jim Somerville <Jim.Somerville@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: fix wrong bit mask in dwc3_event_devt

commit 06f9b6e59661cee510b04513b13ea7927727d758 upstream.

Around DWC USB3 2.30a release another bit has been added to the
Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield.

Because of that, what used to be 8 bits long, has become 9 bits long.

Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of
Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits
not 8 bits. And the following reserved field uses [31:25] bits not
[31:24] bits, and it has 7 bits.

So in dwc3_event_devt, the bit mask should be:
event_info [24:16] 9 bits
reserved31_25 [31:25] 7 bits

This patch makes sure that newer core releases will work fine with
Linux and that we will decode the event information properly on new
core releases.

[ balbi@ti.com : improve commit log a bit ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM

commit 01bb59ebffdec314da8da66266edf29529372f9b upstream.

When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this
warning:
drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined
but not used [-Wunused-function]

Instead of creating nested #ifdefs, this patch fixes it by defining the
xHCI PCI stubs as inline.

This warning has been in since 3.2 kernel and was
caused by commit 421aa841a134f6a743111cf44d0c6d3b45e3cf8c
"usb/xhci: hide MSI code behind PCI bars", but wasn't noticed
until 3.13 when a configuration with these options was tried

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: extend quirk for Renesas cards

commit 6db249ebefc6bf5c39f35dfaacc046d8ad3ffd70 upstream.

After suspend another Renesas PCI-X USB 3.0 card doesn't work.
[root@fedora-20 ~]# lspci -vmnnd 1912:
Device: 03:00.0
Class: USB controller [0c03]
Vendor: Renesas Technology Corp. [1912]
Device: uPD720202 USB 3.0 Host Controller [0015]
SVendor: Renesas Technology Corp. [1912]
SDevice: uPD720202 USB 3.0 Host Controller [0015]
Rev: 02
ProgIf: 30

This patch should be applied to stable kernel 3.14 that contain
the commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d
"xhci: Fix resume issues on Renesas chips in Samsung laptops"

Reported-and-tested-by: Anatoly Kharchenko <rfr-bugs@yandex.ru>
Reference: http://redmine.russianfedora.pro/issues/1315
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: set TXMAXP and AUTOSET for full speed bulk in device mode

commit bb3a2ef2eb8cfaea335dcb3426350df7f3d48069 upstream.

The TXMAXP register is not set correctly for full speed bulk case
when the can_bulk_split() is used. Without this PIO transfers will
not take place correctly

The "mult" factor needs to be updated correctly for the
can_bulk_split() case

The AUTOSET bit in the TXCSR is not being set if the "mult"
factor is greater than 0 for the High Bandwidth ISO case.
But the "mult" factor is also greater than 0 in case of Full speed
bulk transfers with the packet splitting in TXMAXP register

Without the AUTOSET the DMA transfers will not progress in mode1

[ balbi@ti.com : add braces to both branches ]

Signed-off-by: supriya karanth <supriya.karanth@stericsson.com>
Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: ian coolidge <iancoolidge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: fix race in readdir

commit 01d8885785a60ae8f4c37b0ed75bdc96d0fc6a44 upstream.

jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2)

The -ENOENT is due to readdir calling dir_emit on the same entry twice.

If the dir_emit callback sleeps and the tree is changed underneath us,
we won't be able to trust deh_offset(deh) anymore. We need to save
next_pos before we might sleep so we can find the next entry.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/tcm_fc: Fix use-after-free of ft_tpg

commit 2c42be2dd4f6586728dba5c4e197afd5cfaded78 upstream.

ft_del_tpg checks tpg->tport is set before unlinking the tpg from the
tport when the tpg is being removed. Set this pointer in ft_tport_create,
or the unlinking won't happen in ft_del_tpg and tport->tpg will reference
a deleted object.

This patch sets tpg->tport in ft_tport_create, because that's what
ft_del_tpg checks, and is the only way to get back to the tport to
clear tport->tpg.

The bug was occuring when:

- lport created, tport (our per-lport, per-provider context) is
  allocated.
  tport->tpg = NULL
- tpg created
- a PRLI is received. ft_tport_create is called, tpg is found and
  tport->tpg is set
- tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not
  set, tport->tpg is not cleared and points at freed memory
- Future calls to ft_tport_create return tport via first conditional,
  instead of searching for new tpg by calling ft_lport_find_tpg.
  tport->tpg is still invalid, and will access freed memory.

see https://bugzilla.redhat.com/show_bug.cgi?id=1071340

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug

commit d444edc679e7713412f243b792b1f964e5cff1e1 upstream.

This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message()
where during ERL=2 connection recovery, a bogus conn_p pointer could
end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION
notifying the initiator that cmd->logout_cid has failed.

The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with
a bogus conn_p pointer in iscsit_build_conn_drop_async_message().

Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: arcmsr: upper 32 of dma address lost

commit e2c70425f05219b142b3a8a9489a622c736db39d upstream.

The original code always set the upper 32 bits to zero because it was
doing a shift of the wrong variable.

Fixes: 1a4f550a09f8 ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ib_srpt: Use correct ib_sg_dma primitives

commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream.

The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().

This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.

Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Vinod Kumar <vinod.kumar@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ehca: Returns an error on ib_copy_to_udata() failure

commit 5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream.

In case of error when writing to userspace, function ehca_create_cq()
does not set an error code before following its error path.

This patch sets the error code to -EFAULT when ib_copy_to_udata()
fails.

This was caught when using spatch (aka. coccinelle)
to rewrite call to ib_copy_{from,to}_udata().

Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mthca: Return an error on ib_copy_to_udata() failure

commit 08e74c4b00c30c232d535ff368554959403d0432 upstream.

In case of error when writing to userspace, the function mthca_create_cq()
does not set an error code before following its error path.

This patch sets the error code to -EFAULT when ib_copy_to_udata() fails.

This was caught when using spatch (aka. coccinelle)
to rewrite call to ib_copy_{from,to}_udata().

Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/nes: Return an error on ib_copy_from_udata() failure instead of NULL

commit 9d194d1025f463392feafa26ff8c2d8247f71be1 upstream.

In case of error while accessing to userspace memory, function
nes_create_qp() returns NULL instead of an error code wrapped through
ERR_PTR().  But NULL is not expected by ib_uverbs_create_qp(), as it
check for error with IS_ERR().

As page 0 is likely not mapped, it is going to trigger an Oops when
the kernel will try to dereference NULL pointer to access to struct
ib_qp's fields.

In some rare cases, page 0 could be mapped by userspace, which could
turn this bug to a vulnerability that could be exploited: the function
pointers in struct ib_device will be under userspace total control.

This was caught when using spatch (aka. coccinelle)
to rewrite calls to ib_copy_{from,to}_udata().

Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null
Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipath: Fix potential buffer overrun in sending diag packet routine

commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream.

Guard against a potential buffer overrun.  The size to read from the
user is passed in, and due to the padding that needs to be taken into
account, as well as the place holder for the ICRC it is possible to
overflow the 32bit value which would cause more data to be copied from
user space than is allocated in the buffer.

Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix setclientid encode size

commit 480efaee085235bb848f1063f959bf144103c342 upstream.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: notify_change needs elevated write count

commit 9f67f189939eccaa54f3d2c9cf10788abaf2d584 upstream.

Looks like this bug has been here since these write counts were
introduced, not sure why it was just noticed now.

Thanks also to Jan Kara for pointing out the problem.

Reported-by: Matthew Rahtz <mrahtz@rapitasystems.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix test_stateid error reply encoding

commit a11fcce1544df08c723d950ff0edef3adac40405 upstream.

If the entire operation fails then there's nothing to encode.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: buffer-length check for SUPPATTR_EXCLCREAT

commit de3997a7eeb9ea286b15879fdf8a95aae065b4f7 upstream.

This was an omission from 8c18f2052e756e7d5dea712fc6e7ed70c00e8a39
"nfsd41: SUPPATTR_EXCLCREAT attribute".

Cc: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: session needs room for following op to error out

commit 4c69d5855a16f7378648c5733632628fa10431db upstream.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: fix crash during hotplug of PCI USB controller card

commit a2ff864b53eac9a0e9b05bfe9d1781ccd6c2af71 upstream.

The code in hcd-pci.c that matches up EHCI controllers with their
companion UHCI or OHCI controllers assumes that the private drvdata
fields don't get set too early.  However, it turns out that this field
gets set by usb_create_hcd(), before hcd-pci expects it, and this can
result in a crash when two controllers are probed in parallel (as can
happen when a new controller card is hotplugged).

The companions_rwsem lock was supposed to prevent this sort of thing,
but usb_create_hcd() is called outside the scope of the rwsem.

A simple solution is to check that the root-hub pointer has been
initialized as well as the drvdata field.  This doesn't happen until
usb_add_hcd() is called; that call and the check are both protected by
the rwsem.

This patch should be applied to stable kernels from 3.10 onward.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefani Seibold <stefani@seibold.net>
Tested-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

commit b3b42ac2cbae1f3cecbb6229964a4d48af31d382 upstream.

The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  We have
a software workaround for that ("espfix") for the 32-bit kernel, but
it relies on a nonzero stack segment base which is not available in
32-bit mode.

Since 16-bit support is somewhat crippled anyway on a 64-bit kernel
(no V86 mode), and most (if not quite all) 64-bit processors support
virtualization for the users who really need it, simply reject
attempts at creating a 16-bit segment when running on top of a 64-bit
kernel.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0

commit f764cd68d9036498f08fe8834deb6a367b5c2542 upstream.

Zero-initializing ether_type masked that the ether type would never be
obtained for 8021x packets and the comparison against eapol_type
would always fail.

Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:serqt_usb2: Fix sparse warning restricted __le16 degrades to integer

commit abe5d64d1a74195a44cd14624f8178b9f48b7cc7 upstream.

This patch fixes the following sparse warning :
drivers/staging/serqt_usb2/serqt_usb2.c:727:40: warning: restricted __le16 degrades to integer

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>