Daniel Borkmann [Wed, 22 Mar 2023 21:30:55 +0000 (22:30 +0100)]
bpf: Fix __reg_bound_offset 64->32 var_off subreg propagation
Xu reports that after commit
3f50f132d840 ("bpf: Verifier, do explicit ALU32
bounds tracking"), the following BPF program is rejected by the verifier:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2
3: (07) r1 += 1
4: (2d) if r1 > r3 goto pc+8
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff))
6: (18) r0 = 0x7fffffffffffff10
8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f)
9: (18) r0 = 0x8000000000000000
11: (07) r0 += 1
12: (ad) if r0 < r1 goto pc-2
13: (b7) r0 = 0
14: (95) exit
And the verifier log says:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=
9223372036854775568
8: (0f) r1 += r0 ; R0_w=
9223372036854775568 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-
9223372036854775808
11: (07) r0 += 1 ; R0_w=-
9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775810,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775806 R1_w=scalar(umin=
9223372036854775810,umax=
9223372036854775810,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
from 12 to 11: R0_w=-
9223372036854775795 R1=scalar(umin=
9223372036854775822,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775794 R1=scalar(umin=
9223372036854775822,umax=
9223372036854775822,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-
9223372036854775794 R1=scalar(umin=
9223372036854775823,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775793
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775793 R1=scalar(umin=
9223372036854775823,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-
9223372036854775793 R1=scalar(umin=
9223372036854775824,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775792
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775792 R1=scalar(umin=
9223372036854775824,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
The 64bit umin=
9223372036854775810 bound continuously bumps by +1 while
umax=
9223372036854775823 stays as-is until the verifier complexity limit
is reached and the program gets finally rejected. During this simulation,
the umin also eventually surpasses umax. Looking at the first 'from 12
to 11' output line from the loop, R1 has the following state:
R1_w=scalar(umin=0x8000000000000002 (
9223372036854775810),
umax=0x800000000000000f (
9223372036854775823),
var_off=(0x8000000000000000;
0xffffffff))
The var_off has technically not an inconsistent state but it's very
imprecise and far off surpassing 64bit umax bounds whereas the expected
output with refined known bits in var_off should have been like:
R1_w=scalar(umin=0x8000000000000002 (
9223372036854775810),
umax=0x800000000000000f (
9223372036854775823),
var_off=(0x8000000000000000;
0xf))
In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff)
and does not converge into a narrower mask where more bits become known,
eventually transforming R1 into a constant upon umin=
9223372036854775823,
umax=
9223372036854775823 case where the verifier would have terminated and
let the program pass.
The __reg_combine_64_into_32() marks the subregister unknown and propagates
64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within
the 32bit universe. The question came up whether __reg_combine_64_into_32()
should special case the situation that when 64bit {s,u}min bounds have
the same value as 64bit {s,u}max bounds to then assign the latter as
well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the
above example however, that is just /one/ special case and not a /generic/
solution given above example would still not be addressed this way and
remain at an imprecise var_off=(0x8000000000000000; 0xffffffff).
The improvement is needed in __reg_bound_offset() to refine var32_off with
the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync()
code first refines information about the register's min/max bounds via
__update_reg_bounds() from the current var_off, then in __reg_deduce_bounds()
from sign bit and with the potentially learned bits from bounds it'll
update the var_off tnum in __reg_bound_offset(). For example, intersecting
with the old var_off might have improved bounds slightly, e.g. if umax
was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then
result in (0; 0x7f...fc). The intersected var64_off holds then the
universe which is a superset of var32_off. The point for the latter is
not to broaden, but to further refine known bits based on the intersection
of var_off with 32 bit bounds, so that we later construct the final var_off
from upper and lower 32 bits. The final __update_reg_bounds() can then
potentially still slightly refine bounds if more bits became known from the
new var_off.
After the improvement, we can see R1 converging successively:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=
9223372036854775568
8: (0f) r1 += r0 ; R0_w=
9223372036854775568 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-
9223372036854775808
11: (07) r0 += 1 ; R0_w=-
9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775810,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775806 R1_w=-
9223372036854775806
13: safe
from 12 to 11: R0_w=-
9223372036854775806 R1_w=scalar(umin=
9223372036854775811,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775805
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775805 R1_w=-
9223372036854775805
13: safe
[...]
from 12 to 11: R0_w=-
9223372036854775798 R1=scalar(umin=
9223372036854775819,umax=
9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775797
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775797 R1=-
9223372036854775797
13: safe
from 12 to 11: R0_w=-
9223372036854775797 R1=scalar(umin=
9223372036854775820,umax=
9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775796
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775796 R1=-
9223372036854775796
13: safe
from 12 to 11: R0_w=-
9223372036854775796 R1=scalar(umin=
9223372036854775821,umax=
9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775795
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775795 R1=-
9223372036854775795
13: safe
from 12 to 11: R0_w=-
9223372036854775795 R1=scalar(umin=
9223372036854775822,umax=
9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775794 R1=-
9223372036854775794
13: safe
from 12 to 11: R0_w=-
9223372036854775794 R1=-
9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775793
12: (ad) if r0 < r1 goto pc-2
last_idx 12 first_idx 12
parent didn't have regs=1 stack=0 marks: R0_rw=P-
9223372036854775801 R1_r=scalar(umin=
9223372036854775815,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=1 stack=0 before 11: (07) r0 += 1
parent didn't have regs=1 stack=0 marks: R0_rw=P-
9223372036854775805 R1_rw=scalar(umin=
9223372036854775812,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000
last_idx 12 first_idx 12
parent didn't have regs=2 stack=0 marks: R0_rw=P-
9223372036854775801 R1_r=Pscalar(umin=
9223372036854775815,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=2 stack=0 before 11: (07) r0 += 1
parent didn't have regs=2 stack=0 marks: R0_rw=P-
9223372036854775805 R1_rw=Pscalar(umin=
9223372036854775812,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000
regs=2 stack=0 before 8: (0f) r1 += r0
regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10
regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0)
13: safe
from 4 to 13: safe
verification time 322 usec
stack depth 0
processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1
This also fixes up a test case along with this improvement where we match
on the verifier log. The updated log now has a refined var_off, too.
Fixes:
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Xu Kuohai <xukuohai@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com
Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net
Alexei Starovoitov [Wed, 22 Mar 2023 22:11:07 +0000 (15:11 -0700)]
Merge branch 'error checking where helpers call bpf_map_ops'
JP Kobryn says:
====================
Within bpf programs, the bpf helper functions can make inline calls to
kernel functions. In this scenario there can be a disconnect between the
register the kernel function writes a return value to and the register the
bpf program uses to evaluate that return value.
As an example, this bpf code:
long err = bpf_map_update_elem(...);
if (err && err != -EEXIST)
// got some error other than -EEXIST
...can result in the bpf assembly:
; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
37: movabs $0xffff976a10730400,%rdi
41: mov $0x1,%ecx
46: call 0xffffffffe103291c ; htab_map_update_elem
; if (err && err != -EEXIST) {
4b: cmp $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax
4f: je 0x000000000000008e
51: test %rax,%rax
54: je 0x000000000000008e
The compare operation here evaluates %rax, while in the preceding call to
htab_map_update_elem the corresponding assembly returns -EEXIST via %eax
(the lower 32 bits of %rax):
movl $0xffffffef, %r9d
...
movl %r9d, %eax
...since it's returning int (32-bit). So the resulting comparison becomes:
cmp $0xffffffffffffffef, $0x00000000ffffffef
...making it not possible to check for negative errors or specific errors,
since the sign value is left at the 32nd bit. It means in the original
example, the conditional branch will be entered even when the error is
-EEXIST, which was not intended.
The selftests added cover these cases for the different bpf_map_ops
functions. When the second patch is applied, changing the return type of
those functions to long, the comparison works as intended and the tests
pass.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
JP Kobryn [Wed, 22 Mar 2023 19:47:54 +0000 (12:47 -0700)]
bpf: return long from bpf_map_ops funcs
This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.
The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit
bdb7b79b4ce8. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.
For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:
; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
...
46: call 0xffffffffe103291c ; htab_map_update_elem
; if (err && err != -EEXIST) {
4b: cmp $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax
kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:
movl $0xffffffef, %r9d
...
movl %r9d, %eax
...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef
Fixes:
bdb7b79b4ce8 ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
JP Kobryn [Wed, 22 Mar 2023 19:47:53 +0000 (12:47 -0700)]
bpf/selftests: coverage for bpf_map_ops errors
These tests expose the issue of being unable to properly check for errors
returned from inlined bpf map helpers that make calls to the bpf_map_ops
functions. At best, a check for zero or non-zero can be done but these
tests show it is not possible to check for a negative value or for a
specific error value.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-2-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Wed, 22 Mar 2023 16:31:05 +0000 (09:31 -0700)]
Merge branch 'bpf: Support ksym detection in light skeleton.'
Alexei Starovoitov says:
====================
From: Alexei Starovoitov <ast@kernel.org>
v1->v2: update denylist on s390
Patch 1: Cleanup internal libbpf names.
Patch 2: Teach the verifier that rdonly_mem != NULL.
Patch 3: Fix gen_loader to support ksym detection.
Patch 4: Selftest and update denylist.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Alexei Starovoitov [Tue, 21 Mar 2023 20:38:54 +0000 (13:38 -0700)]
selftests/bpf: Add light skeleton test for kfunc detection.
Add light skeleton test for kfunc detection and denylist it for s390.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230321203854.3035-5-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 21 Mar 2023 20:38:53 +0000 (13:38 -0700)]
libbpf: Support kfunc detection in light skeleton.
Teach gen_loader to find {btf_id, btf_obj_fd} of kernel variables and kfuncs
and populate corresponding ld_imm64 and bpf_call insns.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230321203854.3035-4-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 21 Mar 2023 20:38:52 +0000 (13:38 -0700)]
bpf: Teach the verifier to recognize rdonly_mem as not null.
Teach the verifier to recognize PTR_TO_MEM | MEM_RDONLY as not NULL
otherwise if (!bpf_ksym_exists(known_kfunc)) doesn't go through
dead code elimination.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230321203854.3035-3-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 21 Mar 2023 20:38:51 +0000 (13:38 -0700)]
libbpf: Rename RELO_EXTERN_VAR/FUNC.
RELO_EXTERN_VAR/FUNC names are not correct anymore. RELO_EXTERN_VAR represent
ksym symbol in ld_imm64 insn. It can point to kernel variable or kfunc.
Rename RELO_EXTERN_VAR->RELO_EXTERN_LD64 and RELO_EXTERN_FUNC->RELO_EXTERN_CALL
to match what they actually represent.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230321203854.3035-2-alexei.starovoitov@gmail.com
Tushar Vyavahare [Mon, 20 Mar 2023 10:27:05 +0000 (15:57 +0530)]
selftests/xsk: add xdp populate metadata test
Add a new test in copy-mode for testing the copying of metadata from the
buffer in kernel-space to user-space. This is accomplished by adding a
new XDP program and using the bss map to store a counter that is written
to the metadata field. This counter is incremented for every packet so
that the number becomes unique and should be the same as the payload. It
is store in the bss so the value can be reset between runs.
The XDP program populates the metadata and the userspace program checks
the value stored in the metadata field against the payload using the new
is_metadata_correct() function. To turn this verification on or off, add
a new parameter (use_metadata) to the ifobject structure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230320102705.306187-1-tushar.vyavahare@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Tue, 21 Mar 2023 04:57:50 +0000 (21:57 -0700)]
Merge branch 'net: skbuff: skb bitfield compaction - bpf'
Jakub Kicinski says:
====================
I'm trying to make more of the sk_buff bits optional.
Move the BPF-accessed bits a little - because they must
be at coding-time-constant offsets they must precede any
optional bit. While at it clean up the naming a bit.
v1: https://lore.kernel.org/all/
20230308003159.441580-1-kuba@kernel.org/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Jakub Kicinski [Tue, 21 Mar 2023 01:41:15 +0000 (18:41 -0700)]
net: skbuff: move the fields BPF cares about directly next to the offset marker
To avoid more possible BPF dependencies with moving bitfields
around keep the fields BPF cares about right next to the offset
marker.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-4-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Jakub Kicinski [Tue, 21 Mar 2023 01:41:14 +0000 (18:41 -0700)]
net: skbuff: reorder bytes 2 and 3 of the bitfield
BPF needs to know the offsets of fields it tries to access.
Zero-length fields are added to make offsetof() work.
This unfortunately partitions the bitfield (fields across
the zero-length members can't be coalesced).
Reorder bytes 2 and 3, BPF needs to know the offset of fields
previously in byte 3 and some fields in byte 2 should really
be optional.
The two bytes are always in the same cacheline so it should
not matter.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-3-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Jakub Kicinski [Tue, 21 Mar 2023 01:41:13 +0000 (18:41 -0700)]
net: skbuff: rename __pkt_vlan_present_offset to __mono_tc_offset
vlan_present is gone since
commit
354259fa73e2 ("net: remove skb->vlan_present")
rename the offset field to what BPF is currently looking
for in this byte - mono_delivery_time and tc_at_ingress.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Liu Pan [Mon, 20 Mar 2023 03:07:20 +0000 (11:07 +0800)]
libbpf: Explicitly call write to append content to file
Write data to fd by calling "vdprintf", in most implementations
of the standard library, the data is finally written by the writev syscall.
But "uprobe_events/kprobe_events" does not allow segmented writes,
so switch the "append_to_file" function to explicit write() call.
Signed-off-by: Liu Pan <patteliu@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230320030720.650-1-patteliu@gmail.com
Alexei Starovoitov [Sun, 19 Mar 2023 20:30:14 +0000 (13:30 -0700)]
selftest/bpf: Add a test case for ld_imm64 copy logic.
Add a test case to exercise {btf_id, btf_obj_fd} copy logic between ld_imm64 insns.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-2-alexei.starovoitov@gmail.com
Alexei Starovoitov [Sun, 19 Mar 2023 20:30:13 +0000 (13:30 -0700)]
libbpf: Fix ld_imm64 copy logic for ksym in light skeleton.
Unlike normal libbpf the light skeleton 'loader' program is doing
btf_find_by_name_kind() call at run-time to find ksym in the kernel and
populate its {btf_id, btf_obj_fd} pair in ld_imm64 insn. To avoid doing the
search multiple times for the same ksym it remembers the first patched ld_imm64
insn and copies {btf_id, btf_obj_fd} from it into subsequent ld_imm64 insn.
Fix a bug in copying logic, since it may incorrectly clear BPF_PSEUDO_BTF_ID flag.
Also replace always true if (btf_obj_fd >= 0) check with unconditional JMP_JA
to clarify the code.
Fixes:
d995816b77eb ("libbpf: Avoid reload of imm for weak, unresolved, repeating ksym")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-1-alexei.starovoitov@gmail.com
Sreevani Sreejith [Wed, 15 Mar 2023 19:54:05 +0000 (12:54 -0700)]
bpf, docs: Libbpf overview documentation
This patch documents overview of libbpf, including its features for
developing BPF programs.
Signed-off-by: Sreevani Sreejith <ssreevani@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230315195405.2051559-1-ssreevani@meta.com
Manu Bretelle [Fri, 17 Mar 2023 16:32:56 +0000 (09:32 -0700)]
selftests/bpf: Add --json-summary option to test_progs
Currently, test_progs outputs all stdout/stderr as it runs, and when it
is done, prints a summary.
It is non-trivial for tooling to parse that output and extract meaningful
information from it.
This change adds a new option, `--json-summary`/`-J` that let the caller
specify a file where `test_progs{,-no_alu32}` can write a summary of the
run in a json format that can later be parsed by tooling.
Currently, it creates a summary section with successes/skipped/failures
followed by a list of failed tests and subtests.
A test contains the following fields:
- name: the name of the test
- number: the number of the test
- message: the log message that was printed by the test.
- failed: A boolean indicating whether the test failed or not. Currently
we only output failed tests, but in the future, successful tests could
be added.
- subtests: A list of subtests associated with this test.
A subtest contains the following fields:
- name: same as above
- number: sanme as above
- message: the log message that was printed by the subtest.
- failed: same as above but for the subtest
An example run and json content below:
```
$ sudo ./test_progs -a $(grep -v '^#' ./DENYLIST.aarch64 | awk '{print
$1","}' | tr -d '\n') -j -J /tmp/test_progs.json
$ jq < /tmp/test_progs.json | head -n 30
{
"success": 29,
"success_subtest": 23,
"skipped": 3,
"failed": 28,
"results": [
{
"name": "bpf_cookie",
"number": 10,
"message": "test_bpf_cookie:PASS:skel_open 0 nsec\n",
"failed": true,
"subtests": [
{
"name": "multi_kprobe_link_api",
"number": 2,
"message": "kprobe_multi_link_api_subtest:PASS:load_kallsyms 0 nsec\nlibbpf: extern 'bpf_testmod_fentry_test1' (strong): not resolved\nlibbpf: failed to load object 'kprobe_multi'\nlibbpf: failed to load BPF skeleton 'kprobe_multi': -3\nkprobe_multi_link_api_subtest:FAIL:fentry_raw_skel_load unexpected error: -3\n",
"failed": true
},
{
"name": "multi_kprobe_attach_api",
"number": 3,
"message": "libbpf: extern 'bpf_testmod_fentry_test1' (strong): not resolved\nlibbpf: failed to load object 'kprobe_multi'\nlibbpf: failed to load BPF skeleton 'kprobe_multi': -3\nkprobe_multi_attach_api_subtest:FAIL:fentry_raw_skel_load unexpected error: -3\n",
"failed": true
},
{
"name": "lsm",
"number": 8,
"message": "lsm_subtest:PASS:lsm.link_create 0 nsec\nlsm_subtest:FAIL:stack_mprotect unexpected stack_mprotect: actual 0 != expected -1\n",
"failed": true
}
```
The file can then be used to print a summary of the test run and list of
failing tests/subtests:
```
$ jq -r < /tmp/test_progs.json '"Success: \(.success)/\(.success_subtest), Skipped: \(.skipped), Failed: \(.failed)"'
Success: 29/23, Skipped: 3, Failed: 28
$ jq -r < /tmp/test_progs.json '.results | map([
if .failed then "#\(.number) \(.name)" else empty end,
(
. as {name: $tname, number: $tnum} | .subtests | map(
if .failed then "#\($tnum)/\(.number) \($tname)/\(.name)" else empty end
)
)
]) | flatten | .[]' | head -n 20
#10 bpf_cookie
#10/2 bpf_cookie/multi_kprobe_link_api
#10/3 bpf_cookie/multi_kprobe_attach_api
#10/8 bpf_cookie/lsm
#15 bpf_mod_race
#15/1 bpf_mod_race/ksym (used_btfs UAF)
#15/2 bpf_mod_race/kfunc (kfunc_btf_tab UAF)
#36 cgroup_hierarchical_stats
#61 deny_namespace
#61/1 deny_namespace/unpriv_userns_create_no_bpf
#73 fexit_stress
#83 get_func_ip_test
#99 kfunc_dynptr_param
#99/1 kfunc_dynptr_param/dynptr_data_null
#99/4 kfunc_dynptr_param/dynptr_data_null
#100 kprobe_multi_bench_attach
#100/1 kprobe_multi_bench_attach/kernel
#100/2 kprobe_multi_bench_attach/modules
#101 kprobe_multi_test
#101/1 kprobe_multi_test/skel_api
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317163256.3809328-1-chantr4@gmail.com
Andrii Nakryiko [Fri, 17 Mar 2023 22:44:27 +0000 (15:44 -0700)]
Merge branch 'bpf: Add detection of kfuncs.'
Alexei Starovoitov says:
====================
From: Alexei Starovoitov <ast@kernel.org>
Allow BPF programs detect at load time whether particular kfunc exists.
Patch 1: Allow ld_imm64 to point to kfunc in the kernel.
Patch 2: Fix relocation of kfunc in ld_imm64 insn when kfunc is in kernel module.
Patch 3: Introduce bpf_ksym_exists() macro.
Patch 4: selftest.
NOTE: detection of kfuncs from light skeleton is not supported yet.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Alexei Starovoitov [Fri, 17 Mar 2023 20:19:20 +0000 (13:19 -0700)]
selftests/bpf: Add test for bpf_ksym_exists().
Add load and run time test for bpf_ksym_exists() and check that the verifier
performs dead code elimination for non-existing kfunc.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230317201920.62030-5-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 17 Mar 2023 20:19:19 +0000 (13:19 -0700)]
libbpf: Introduce bpf_ksym_exists() macro.
Introduce bpf_ksym_exists() macro that can be used by BPF programs
to detect at load time whether particular ksym (either variable or kfunc)
is present in the kernel.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317201920.62030-4-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 17 Mar 2023 20:19:18 +0000 (13:19 -0700)]
libbpf: Fix relocation of kfunc ksym in ld_imm64 insn.
void *p = kfunc; -> generates ld_imm64 insn.
kfunc() -> generates bpf_call insn.
libbpf patches bpf_call insn correctly while only btf_id part of ld_imm64 is
set in the former case. Which means that pointers to kfuncs in modules are not
patched correctly and the verifier rejects load of such programs due to btf_id
being out of range. Fix libbpf to patch ld_imm64 for kfunc.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317201920.62030-3-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 17 Mar 2023 20:19:17 +0000 (13:19 -0700)]
bpf: Allow ld_imm64 instruction to point to kfunc.
Allow ld_imm64 insn with BPF_PSEUDO_BTF_ID to hold the address of kfunc. The
ld_imm64 pointing to a valid kfunc will be seen as non-null PTR_TO_MEM by
is_branch_taken() logic of the verifier, while libbpf will resolve address to
unknown kfunc as ld_imm64 reg, 0 which will also be recognized by
is_branch_taken() and the verifier will proceed dead code elimination. BPF
programs can use this logic to detect at load time whether kfunc is present in
the kernel with bpf_ksym_exists() macro that is introduced in the next patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230317201920.62030-2-alexei.starovoitov@gmail.com
Bagas Sanjaya [Tue, 14 Mar 2023 07:44:49 +0000 (14:44 +0700)]
bpf, docs: Use internal linking for link to netdev subsystem doc
Commit
d56b0c461d19da ("bpf, docs: Fix link to netdev-FAQ target")
attempts to fix linking problem to undefined "netdev-FAQ" label
introduced in
287f4fa99a5281 ("docs: Update references to netdev-FAQ")
by changing internal cross reference to netdev subsystem documentation
(Documentation/process/maintainer-netdev.rst) to external one at
docs.kernel.org. However, the linking problem is still not
resolved, as the generated link points to non-existent netdev-FAQ
section of the external doc, which when clicked, will instead going
to the top of the doc.
Revert back to internal linking by simply mention the doc path while
massaging the leading text to the link, since the netdev subsystem
doc contains no FAQs but rather general information about the subsystem.
Fixes:
d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target")
Fixes:
287f4fa99a52 ("docs: Update references to netdev-FAQ")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230314074449.23620-1-bagasdotme@gmail.com
Viktor Malik [Fri, 17 Mar 2023 09:56:01 +0000 (10:56 +0100)]
kallsyms, bpf: Move find_kallsyms_symbol_value out of internal header
Moving find_kallsyms_symbol_value from kernel/module/internal.h to
include/linux/module.h. The reason is that internal.h is not prepared to
be included when CONFIG_MODULES=n. find_kallsyms_symbol_value is used by
kernel/bpf/verifier.c and including internal.h from it (without modules)
leads into a compilation error:
In file included from ../include/linux/container_of.h:5,
from ../include/linux/list.h:5,
from ../include/linux/timer.h:5,
from ../include/linux/workqueue.h:9,
from ../include/linux/bpf.h:10,
from ../include/linux/bpf-cgroup.h:5,
from ../kernel/bpf/verifier.c:7:
../kernel/bpf/../module/internal.h: In function 'mod_find':
../include/linux/container_of.h:20:54: error: invalid use of undefined type 'struct module'
20 | static_assert(__same_type(*(ptr), ((type *)0)->member) || \
| ^~
[...]
This patch fixes the above error.
Fixes:
31bf1dbccfb0 ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/oe-kbuild-all/202303161404.OrmfCy09-lkp@intel.com/
Link: https://lore.kernel.org/bpf/20230317095601.386738-1-vmalik@redhat.com
Alexei Starovoitov [Fri, 17 Mar 2023 05:20:09 +0000 (22:20 -0700)]
Merge branch 'double-fix bpf_test_run + XDP_PASS recycling'
Alexander Lobakin says:
====================
Enabling skb PP recycling revealed a couple issues in the bpf_test_run
code. Recycling broke the assumption that the headroom won't ever be
touched during the test_run execution: xdp_scrub_frame() invalidates the
XDP frame at the headroom start, while neigh xmit code overwrites 2 bytes
to the left of the Ethernet header. The first makes the kernel panic in
certain cases, while the second breaks xdp_do_redirect selftest on BE.
test_run is a limited-scope entity, so let's hope no more corner cases
will happen here or at least they will be as easy and pleasant to fix
as those two.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Thu, 16 Mar 2023 17:50:51 +0000 (18:50 +0100)]
selftests/bpf: fix "metadata marker" getting overwritten by the netstack
Alexei noticed xdp_do_redirect test on BPF CI started failing on
BE systems after skb PP recycling was enabled:
test_xdp_do_redirect:PASS:prog_run 0 nsec
test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec
test_xdp_do_redirect:PASS:pkt_count_zero 0 nsec
test_xdp_do_redirect:FAIL:pkt_count_tc unexpected pkt_count_tc: actual
220 != expected 9998
test_max_pkt_size:PASS:prog_run_max_size 0 nsec
test_max_pkt_size:PASS:prog_run_too_big 0 nsec
close_netns:PASS:setns 0 nsec
#289 xdp_do_redirect:FAIL
Summary: 270/1674 PASSED, 30 SKIPPED, 1 FAILED
and it doesn't happen on LE systems.
Ilya then hunted it down to:
#0 0x0000000000aaeee6 in neigh_hh_output (hh=0x83258df0,
skb=0x88142200) at linux/include/net/neighbour.h:503
#1 0x0000000000ab2cda in neigh_output (skip_cache=false,
skb=0x88142200, n=<optimized out>) at linux/include/net/neighbour.h:544
#2 ip6_finish_output2 (net=net@entry=0x88edba00, sk=sk@entry=0x0,
skb=skb@entry=0x88142200) at linux/net/ipv6/ip6_output.c:134
#3 0x0000000000ab4cbc in __ip6_finish_output (skb=0x88142200, sk=0x0,
net=0x88edba00) at linux/net/ipv6/ip6_output.c:195
#4 ip6_finish_output (net=0x88edba00, sk=0x0, skb=0x88142200) at
linux/net/ipv6/ip6_output.c:206
xdp_do_redirect test places a u32 marker (0x42) right before the Ethernet
header to check it then in the XDP program and return %XDP_ABORTED if it's
not there. Neigh xmit code likes to round up hard header length to speed
up copying the header, so it overwrites two bytes in front of the Eth
header. On LE systems, 0x42 is one byte at `data - 4`, while on BE it's
`data - 1`, what explains why it happens only there.
It didn't happen previously due to that %XDP_PASS meant the page will be
discarded and replaced by a new one, but now it can be recycled as well,
while bpf_test_run code doesn't reinitialize the content of recycled
pages. This mark is limited to this particular test and its setup though,
so there's no need to predict 1000 different possible cases. Just move
it 4 bytes to the left, still keeping it 32 bit to match on more bytes.
Fixes:
9c94bbf9a87b ("xdp: recycle Page Pool backed skbs built from XDP frames")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/CAADnVQ+B_JOU+EpP=DKhbY9yXdN6GiRPnpTTXfEZ9sNkUeb-yQ@mail.gmail.com
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> # + debugging
Link: https://lore.kernel.org/bpf/8341c1d9f935f410438e79d3bd8a9cc50aefe105.camel@linux.ibm.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230316175051.922550-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Thu, 16 Mar 2023 17:50:50 +0000 (18:50 +0100)]
bpf, test_run: fix crashes due to XDP frame overwriting/corruption
syzbot and Ilya faced the splats when %XDP_PASS happens for bpf_test_run
after skb PP recycling was enabled for {__,}xdp_build_skb_from_frame():
BUG: kernel NULL pointer dereference, address:
0000000000000d28
RIP: 0010:memset_erms+0xd/0x20 arch/x86/lib/memset_64.S:66
[...]
Call Trace:
<TASK>
__finalize_skb_around net/core/skbuff.c:321 [inline]
__build_skb_around+0x232/0x3a0 net/core/skbuff.c:379
build_skb_around+0x32/0x290 net/core/skbuff.c:444
__xdp_build_skb_from_frame+0x121/0x760 net/core/xdp.c:622
xdp_recv_frames net/bpf/test_run.c:248 [inline]
xdp_test_run_batch net/bpf/test_run.c:334 [inline]
bpf_test_run_xdp_live+0x1289/0x1930 net/bpf/test_run.c:362
bpf_prog_test_run_xdp+0xa05/0x14e0 net/bpf/test_run.c:1418
[...]
This happens due to that it calls xdp_scrub_frame(), which nullifies
xdpf->data. bpf_test_run code doesn't reinit the frame when the XDP
program doesn't adjust head or tail. Previously, %XDP_PASS meant the
page will be released from the pool and returned to the MM layer, but
now it does return to the Pool with the nullified xdpf->data, which
doesn't get reinitialized then.
So, in addition to checking whether the head and/or tail have been
adjusted, check also for a potential XDP frame corruption. xdpf->data
is 100% affected and also xdpf->flags is the field closest to the
metadata / frame start. Checking for these two should be enough for
non-extreme cases.
Fixes:
9c94bbf9a87b ("xdp: recycle Page Pool backed skbs built from XDP frames")
Reported-by: syzbot+e1d1b65f7c32f2a86a9f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/bpf/000000000000f1985705f6ef2243@google.com
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/e07dd94022ad5731705891b9487cc9ed66328b94.camel@linux.ibm.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230316175051.922550-2-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Luis Gerhorst [Wed, 15 Mar 2023 16:54:00 +0000 (17:54 +0100)]
bpf: Remove misleading spec_v1 check on var-offset stack read
For every BPF_ADD/SUB involving a pointer, adjust_ptr_min_max_vals()
ensures that the resulting pointer has a constant offset if
bypass_spec_v1 is false. This is ensured by calling sanitize_check_bounds()
which in turn calls check_stack_access_for_ptr_arithmetic(). There,
-EACCESS is returned if the register's offset is not constant, thereby
rejecting the program.
In summary, an unprivileged user must never be able to create stack
pointers with a variable offset. That is also the case, because a
respective check in check_stack_write() is missing. If they were able
to create a variable-offset pointer, users could still use it in a
stack-write operation to trigger unsafe speculative behavior [1].
Because unprivileged users must already be prevented from creating
variable-offset stack pointers, viable options are to either remove
this check (replacing it with a clarifying comment), or to turn it
into a "verifier BUG"-message, also adding a similar check in
check_stack_write() (for consistency, as a second-level defense).
This patch implements the first option to reduce verifier bloat.
This check was introduced by commit
01f810ace9ed ("bpf: Allow
variable-offset stack access") which correctly notes that
"variable-offset reads and writes are disallowed (they were already
disallowed for the indirect access case) because the speculative
execution checking code doesn't support them". However, it does not
further discuss why the check in check_stack_read() is necessary.
The code which made this check obsolete was also introduced in this
commit.
I have compiled ~650 programs from the Linux selftests, Linux samples,
Cilium, and libbpf/examples projects and confirmed that none of these
trigger the check in check_stack_read() [2]. Instead, all of these
programs are, as expected, already rejected when constructing the
variable-offset pointers. Note that the check in
check_stack_access_for_ptr_arithmetic() also prints "off=%d" while the
code removed by this patch does not (the error removed does not appear
in the "verification_error" values). For reproducibility, the
repository linked includes the raw data and scripts used to create
the plot.
[1] https://arxiv.org/pdf/1807.03757.pdf
[2] https://gitlab.cs.fau.de/un65esoq/bpf-spectre/-/raw/
53dc19fcf459c186613b1156a81504b39c8d49db/data/plots/23-02-26_23-56_bpftool/bpftool/0004-errors.pdf?inline=false
Fixes:
01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230315165358.23701-1-gerhorst@cs.fau.de
Alexei Starovoitov [Thu, 16 Mar 2023 19:28:30 +0000 (12:28 -0700)]
Merge branch 'Make struct bpf_cpumask RCU safe'
David Vernet says:
====================
The struct bpf_cpumask type is currently not RCU safe. It uses the
bpf_mem_cache_{alloc,free}() APIs to allocate and release cpumasks, and
those allocations may be reused before an RCU grace period has elapsed.
We want to be able to enable using this pattern in BPF programs:
private(MASK) static struct bpf_cpumask __kptr *global;
int BPF_PROG(prog, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = global;
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_rcu_read_unlock();
}
In other words, to be able to pass a kptr to KF_RCU bpf_cpumask kfuncs
without requiring the acquisition and release of refcounts using
bpf_cpumask_kptr_get(). This patchset enables this by making the struct
bpf_cpumask type RCU safe, and removing the bpf_cpumask_kptr_get()
function.
---
v1: https://lore.kernel.org/all/
20230316014122.678082-2-void@manifault.com/
Changelog:
----------
v1 -> v2:
- Add doxygen comment for new @rcu field in struct bpf_cpumask.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Thu, 16 Mar 2023 05:40:28 +0000 (00:40 -0500)]
bpf,docs: Remove bpf_cpumask_kptr_get() from documentation
Now that the kfunc no longer exists, we can remove it and instead
describe how RCU can be used to get a struct bpf_cpumask from a map
value. This patch updates the BPF documentation accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-6-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Thu, 16 Mar 2023 05:40:27 +0000 (00:40 -0500)]
bpf: Remove bpf_cpumask_kptr_get() kfunc
Now that struct bpf_cpumask is RCU safe, there's no need for this kfunc.
Rather than doing the following:
private(MASK) static struct bpf_cpumask __kptr *global;
int BPF_PROG(prog, s32 cpu, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = bpf_cpumask_kptr_get(&global);
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_cpumask_release(cpumask);
bpf_rcu_read_unlock();
}
Programs can instead simply do (assume same global cpumask):
int BPF_PROG(prog, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = global;
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_rcu_read_unlock();
}
In other words, no extra atomic acquire / release, and less boilerplate
code.
This patch removes both the kfunc, as well as its selftests and
documentation.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Thu, 16 Mar 2023 05:40:26 +0000 (00:40 -0500)]
bpf/selftests: Test using global cpumask kptr with RCU
Now that struct bpf_cpumask * is considered an RCU-safe type according
to the verifier, we should add tests that validate its common usages.
This patch adds those tests to the cpumask test suite. A subsequent
changes will remove bpf_cpumask_kptr_get(), and will adjust the selftest
and BPF documentation accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Thu, 16 Mar 2023 05:40:25 +0000 (00:40 -0500)]
bpf: Mark struct bpf_cpumask as rcu protected
struct bpf_cpumask is a BPF-wrapper around the struct cpumask type which
can be instantiated by a BPF program, and then queried as a cpumask in
similar fashion to normal kernel code. The previous patch in this series
makes the type fully RCU safe, so the type can be included in the
rcu_protected_type BTF ID list.
A subsequent patch will remove bpf_cpumask_kptr_get(), as it's no longer
useful now that we can just treat the type as RCU safe by default and do
our own if check.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Thu, 16 Mar 2023 05:40:24 +0000 (00:40 -0500)]
bpf: Free struct bpf_cpumask in call_rcu handler
The struct bpf_cpumask type uses the bpf_mem_cache_{alloc,free}() APIs
to allocate and free its cpumasks. The bpf_mem allocator may currently
immediately reuse some memory when its freed, without waiting for an RCU
read cycle to elapse. We want to be able to treat struct bpf_cpumask
objects as completely RCU safe.
This is necessary for two reasons:
1. bpf_cpumask_kptr_get() currently does an RCU-protected
refcnt_inc_not_zero(). This of course assumes that the underlying
memory is not reused, and is therefore unsafe in its current form.
2. We want to be able to get rid of bpf_cpumask_kptr_get() entirely, and
intead use the superior kptr RCU semantics now afforded by the
verifier.
This patch fixes (1), and enables (2), by making struct bpf_cpumask RCU
safe. A subsequent patch will update the verifier to allow struct
bpf_cpumask * pointers to be passed to KF_RCU kfuncs, and then a latter
patch will remove bpf_cpumask_kptr_get().
Fixes:
516f4d3397c9 ("bpf: Enable cpumasks to be queried and used as kptrs")
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Müller [Wed, 15 Mar 2023 17:15:50 +0000 (17:15 +0000)]
libbpf: Ignore warnings about "inefficient alignment"
Some consumers of libbpf compile the code base with different warnings
enabled. In a report for perf, for example, -Wpacked was set which
caused warnings about "inefficient alignment" to be emitted on a subset
of supported architectures.
With this change we silence specifically those warnings, as we intentionally
worked with packed structs.
This is a similar resolution as in
b2f10cd4e805 ("perf cpumap: Fix alignment
for masks in event encoding").
Fixes:
1eebcb60633f ("libbpf: Implement basic zip archive parsing support")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/CA+G9fYtBnwxAWXi2+GyNByApxnf_DtP1-6+_zOKAdJKnJBexjg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230315171550.1551603-1-deso@posteo.net
Martin KaFai Lau [Thu, 16 Mar 2023 00:07:26 +0000 (17:07 -0700)]
selftests/bpf: Fix a fd leak in an error path in network_helpers.c
In __start_server, it leaks a fd when setsockopt(SO_REUSEPORT) fails.
This patch fixes it.
Fixes:
eed92afdd14c ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230316000726.1016773-2-martin.lau@linux.dev
Martin KaFai Lau [Thu, 16 Mar 2023 00:07:25 +0000 (17:07 -0700)]
selftests/bpf: Use ASSERT_EQ instead ASSERT_OK for testing memcmp result
In tcp_hdr_options test, it ensures the received tcp hdr option
and the sk local storage have the expected values. It uses memcmp
to check that. Testing the memcmp result with ASSERT_OK is confusing
because ASSERT_OK will print out the errno which is not set.
This patch uses ASSERT_EQ to check for 0 instead.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230316000726.1016773-1-martin.lau@linux.dev
Alexei Starovoitov [Wed, 15 Mar 2023 18:43:36 +0000 (11:43 -0700)]
Merge branch 'Fix attaching fentry/fexit/fmod_ret/lsm to modules'
Viktor Malik says:
====================
I noticed that the verifier behaves incorrectly when attaching to fentry
of multiple functions of the same name located in different modules (or
in vmlinux). The reason for this is that if the target program is not
specified, the verifier will search kallsyms for the trampoline address
to attach to. The entire kallsyms is always searched, not respecting the
module in which the function to attach to is located.
As Yonghong correctly pointed out, there is yet another issue - the
trampoline acquires the module reference in register_fentry which means
that if the module is unloaded between the place where the address is
found in the verifier and register_fentry, it is possible that another
module is loaded to the same address in the meantime, which may lead to
errors.
This patch fixes the above issues by extracting the module name from the
BTF of the attachment target (which must be specified) and by doing the
search in kallsyms of the correct module. At the same time, the module
reference is acquired right after the address is found and only released
right before the program itself is unloaded.
---
Changes in v10:
- added the new test to DENYLIST.aarch64 (suggested by Andrii)
- renamed the test source file to match the test name
Changes in v9:
- two small changes suggested by Jiri Olsa and Jiri's ack
Changes in v8:
- added module_put to error paths in bpf_check_attach_target after the
module reference is acquired
Changes in v7:
- refactored the module reference manipulation (comments by Jiri Olsa)
- cleaned up the test (comments by Andrii Nakryiko)
Changes in v6:
- storing the module reference inside bpf_prog_aux instead of
bpf_trampoline and releasing it when the program is unloaded
(suggested by Jiri Olsa)
Changes in v5:
- fixed acquiring and releasing of module references by trampolines to
prevent modules being unloaded between address lookup and trampoline
allocation
Changes in v4:
- reworked module kallsyms lookup approach using existing functions,
verifier now calls btf_try_get_module to retrieve the module and
find_kallsyms_symbol_value to get the symbol address (suggested by
Alexei)
- included Jiri Olsa's comments
- improved description of the new test and added it as a comment into
the test source
Changes in v3:
- added trivial implementation for kallsyms_lookup_name_in_module() for
!CONFIG_MODULES (noticed by test robot, fix suggested by Hao Luo)
Changes in v2:
- introduced and used more space-efficient kallsyms lookup function,
suggested by Jiri Olsa
- included Hao Luo's comments
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Viktor Malik [Fri, 10 Mar 2023 07:41:00 +0000 (08:41 +0100)]
bpf/selftests: Test fentry attachment to shadowed functions
Adds a new test that tries to attach a program to fentry of two
functions of the same name, one located in vmlinux and the other in
bpf_testmod.
To avoid conflicts with existing tests, a new function
"bpf_fentry_shadow_test" was created both in vmlinux and in bpf_testmod.
The previous commit fixed a bug which caused this test to fail. The
verifier would always use the vmlinux function's address as the target
trampoline address, hence trying to create two trampolines for a single
address, which is forbidden.
The test (similarly to other fentry/fexit tests) is not working on arm64
at the moment.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/5fe2f364190b6f79b085066ed7c5989c5bc475fa.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Viktor Malik [Fri, 10 Mar 2023 07:40:59 +0000 (08:40 +0100)]
bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules
This resolves two problems with attachment of fentry/fexit/fmod_ret/lsm
to functions located in modules:
1. The verifier tries to find the address to attach to in kallsyms. This
is always done by searching the entire kallsyms, not respecting the
module in which the function is located. Such approach causes an
incorrect attachment address to be computed if the function to attach
to is shadowed by a function of the same name located earlier in
kallsyms.
2. If the address to attach to is located in a module, the module
reference is only acquired in register_fentry. If the module is
unloaded between the place where the address is found
(bpf_check_attach_target in the verifier) and register_fentry, it is
possible that another module is loaded to the same address which may
lead to potential errors.
Since the attachment must contain the BTF of the program to attach to,
we extract the module from it and search for the function address in the
correct module (resolving problem no. 1). Then, the module reference is
taken directly in bpf_check_attach_target and stored in the bpf program
(in bpf_prog_aux). The reference is only released when the program is
unloaded (resolving problem no. 2).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/3f6a9d8ae850532b5ef864ef16327b0f7a669063.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tejun Heo [Tue, 14 Mar 2023 21:59:49 +0000 (11:59 -1000)]
cgroup: Make current_cgns_cgroup_dfl() safe to call after exit_task_namespace()
The commit
332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc") added
bpf_cgroup_from_id() which calls current_cgns_cgroup_dfl() through
cgroup_get_from_id(). However, BPF programs may be attached to a point where
current->nsproxy has already been cleared to NULL by exit_task_namespace()
and calling bpf_cgroup_from_id() would cause an oops.
Just return the system-wide root if nsproxy has been cleared. This allows
all cgroups to be looked up after the task passed through
exit_task_namespace(), which semantically makes sense. Given that the only
way to get this behavior is through BPF programs, it seems safe but let's
see what others think.
Fixes:
332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc")
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/ZBDuVWiFj2jiz3i8@slm.duckdns.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Tue, 14 Mar 2023 22:28:11 +0000 (15:28 -0700)]
selftests/bpf: Fix trace_virtqueue_add_sgs test issue with LLVM 17.
LLVM commit https://reviews.llvm.org/D143726 introduced hoistMinMax optimization
that transformed
(i < VIRTIO_MAX_SGS) && (i < out_sgs)
into
i < MIN(VIRTIO_MAX_SGS, out_sgs)
and caused the verifier to stop recognizing such loop as bounded.
Which resulted in the following test failure:
libbpf: prog 'trace_virtqueue_add_sgs': BPF program load failed: Bad address
libbpf: prog 'trace_virtqueue_add_sgs': -- BEGIN PROG LOAD LOG --
The sequence of 8193 jumps is too complex.
verification time 789206 usec
stack depth 56
processed 156446 insns (limit 1000000) max_states_per_insn 7 total_states 1746 peak_states 1701 mark_read 12
-- END PROG LOAD LOG --
libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -14
libbpf: failed to load object 'loop6.bpf.o'
Workaround the verifier limitation for now with inline asm that
prevents this particular optimization.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Tue, 14 Mar 2023 22:20:05 +0000 (15:20 -0700)]
Merge branch 'xdp: recycle Page Pool backed skbs built from XDP frames'
Alexander Lobakin says:
====================
Yeah, I still remember that "Who needs cpumap nowadays" (c), but anyway.
__xdp_build_skb_from_frame() missed the moment when the networking stack
became able to recycle skb pages backed by a page_pool. This was making
e.g. cpumap redirect even less effective than simple %XDP_PASS. veth was
also affected in some scenarios.
A lot of drivers use skb_mark_for_recycle() already, it's been almost
two years and seems like there are no issues in using it in the generic
code too. {__,}xdp_release_frame() can be then removed as it losts its
last user.
Page Pool becomes then zero-alloc (or almost) in the abovementioned
cases, too. Other memory type models (who needs them at this point)
have no changes.
Some numbers on 1 Xeon Platinum core bombed with 27 Mpps of 64-byte
IPv6 UDP, iavf w/XDP[0] (CONFIG_PAGE_POOL_STATS is enabled):
Plain %XDP_PASS on baseline, Page Pool driver:
src cpu Rx drops dst cpu Rx
2.1 Mpps N/A 2.1 Mpps
cpumap redirect (cross-core, w/o leaving its NUMA node) on baseline:
6.8 Mpps 5.0 Mpps 1.8 Mpps
cpumap redirect with skb PP recycling:
7.9 Mpps 5.7 Mpps 2.2 Mpps
+22% (from cpumap redir on baseline)
[0] https://github.com/alobakin/linux/commits/iavf-xdp
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Mon, 13 Mar 2023 21:55:53 +0000 (22:55 +0100)]
xdp: remove unused {__,}xdp_release_frame()
__xdp_build_skb_from_frame() was the last user of
{__,}xdp_release_frame(), which detaches pages from the page_pool.
All the consumers now recycle Page Pool skbs and page, except mlx5,
stmmac and tsnep drivers, which use page_pool_release_page() directly
(might change one day). It's safe to assume this functionality is not
needed anymore and can be removed (in favor of recycling).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-5-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Mon, 13 Mar 2023 21:55:52 +0000 (22:55 +0100)]
xdp: recycle Page Pool backed skbs built from XDP frames
__xdp_build_skb_from_frame() state(d):
/* Until page_pool get SKB return path, release DMA here */
Page Pool got skb pages recycling in April 2021, but missed this
function.
xdp_release_frame() is relevant only for Page Pool backed frames and it
detaches the page from the corresponding page_pool in order to make it
freeable via page_frag_free(). It can instead just mark the output skb
as eligible for recycling if the frame is backed by a pp. No change for
other memory model types (the same condition check as before).
cpumap redirect and veth on Page Pool drivers now become zero-alloc (or
almost).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-4-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Mon, 13 Mar 2023 21:55:51 +0000 (22:55 +0100)]
net: page_pool, skbuff: make skb_mark_for_recycle() always available
skb_mark_for_recycle() is guarded with CONFIG_PAGE_POOL, this creates
unneeded complication when using it in the generic code. For now, it's
only used in the drivers always selecting Page Pool, so this works.
Move the guards so that preprocessor will cut out only the operation
itself and the function will still be a noop on !PAGE_POOL systems,
but available there as well.
No functional changes.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303020342.Wi2PRFFH-lkp@intel.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Mon, 13 Mar 2023 21:55:50 +0000 (22:55 +0100)]
selftests/bpf: robustify test_xdp_do_redirect with more payload magics
Currently, the test relies on that only dropped ("xmitted") frames will
be recycled and if a frame became an skb, it will be freed later by the
stack and never come back to its page_pool.
So, it easily gets broken by trying to recycle skbs[0]:
test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec
test_xdp_do_redirect:FAIL:pkt_count_zero unexpected pkt_count_zero:
actual 9936 != expected 2
test_xdp_do_redirect:PASS:pkt_count_tc 0 nsec
That huge mismatch happened because after the TC ingress hook zeroes the
magic, the page gets recycled when skb is freed, not returned to the MM
layer. "Live frames" mode initializes only new pages and keeps the
recycled ones as is by design, so they appear with zeroed magic on the
Rx path again.
Expand the possible magic values from two: 0 (was "xmitted"/dropped or
did hit the TC hook) and 0x42 (hit the input XDP prog) to three: the new
one will mark frames hit the TC hook, so that they will elide both
@pkt_count_zero and @pkt_count_xdp. They can then be recycled to their
page_pool or returned to the page allocator, this won't affect the
counters anyhow. Just make sure to mark them as "input" (0x42) when they
appear on the Rx path again.
Also make an enum from those magics, so that they will be always visible
and can be changed in just one place anytime. This also eases adding any
new marks later on.
Link: https://github.com/kernel-patches/bpf/actions/runs/4386538411/jobs/7681081789
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-2-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Tue, 14 Mar 2023 06:08:21 +0000 (23:08 -0700)]
Merge branch 'bpf: Allow helpers access ptr_to_btf_id.'
Alexei Starovoitov says:
====================
From: Alexei Starovoitov <ast@kernel.org>
Allow code like:
bpf_strncmp(task->comm, 16, "foo");
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexei Starovoitov [Mon, 13 Mar 2023 23:58:45 +0000 (16:58 -0700)]
selftests/bpf: Add various tests to check helper access into ptr_to_btf_id.
Add various tests to check helper access into ptr_to_btf_id.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230313235845.61029-4-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexei Starovoitov [Mon, 13 Mar 2023 23:58:44 +0000 (16:58 -0700)]
bpf: Allow helpers access trusted PTR_TO_BTF_ID.
The verifier rejects the code:
bpf_strncmp(task->comm, 16, "my_task");
with the message:
16: (85) call bpf_strncmp#182
R1 type=trusted_ptr_ expected=fp, pkt, pkt_meta, map_key, map_value, mem, ringbuf_mem, buf
Teach the verifier that such access pattern is safe.
Do not allow untrusted and legacy ptr_to_btf_id to be passed into helpers.
Reported-by: David Vernet <void@manifault.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230313235845.61029-3-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexei Starovoitov [Mon, 13 Mar 2023 23:58:43 +0000 (16:58 -0700)]
bpf: Fix bpf_strncmp proto.
bpf_strncmp() doesn't write into its first argument.
Make sure that the verifier knows about it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230313235845.61029-2-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Dave Thaler [Fri, 10 Mar 2023 23:38:14 +0000 (23:38 +0000)]
bpf, docs: Add signed comparison example
Improve clarity by adding an example of a signed comparison instruction
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Acked-by: David Vernet <void@manifault.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230310233814.4641-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ross Zwisler [Mon, 13 Mar 2023 20:56:28 +0000 (14:56 -0600)]
selftests/bpf: use canonical ftrace path
The canonical location for the tracefs filesystem is at
/sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many tests in the bpf selftest code still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-3-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ross Zwisler [Mon, 13 Mar 2023 20:56:27 +0000 (14:56 -0600)]
bpf: use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Mon, 13 Mar 2023 21:46:41 +0000 (14:46 -0700)]
bpf: Disable migration when freeing stashed local kptr using obj drop
When a local kptr is stashed in a map and freed when the map goes away,
currently an error like the below appears:
[ 39.195695] BUG: using smp_processor_id() in preemptible [
00000000] code: kworker/u32:15/2875
[ 39.196549] caller is bpf_mem_free+0x56/0xc0
[ 39.196958] CPU: 15 PID: 2875 Comm: kworker/u32:15 Tainted: G O 6.2.0-13016-g22df776a9a86 #4477
[ 39.197897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 39.198949] Workqueue: events_unbound bpf_map_free_deferred
[ 39.199470] Call Trace:
[ 39.199703] <TASK>
[ 39.199911] dump_stack_lvl+0x60/0x70
[ 39.200267] check_preemption_disabled+0xbf/0xe0
[ 39.200704] bpf_mem_free+0x56/0xc0
[ 39.201032] ? bpf_obj_new_impl+0xa0/0xa0
[ 39.201430] bpf_obj_free_fields+0x1cd/0x200
[ 39.201838] array_map_free+0xad/0x220
[ 39.202193] ? finish_task_switch+0xe5/0x3c0
[ 39.202614] bpf_map_free_deferred+0xea/0x210
[ 39.203006] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.203460] process_one_work+0x64f/0xbe0
[ 39.203822] ? pwq_dec_nr_in_flight+0x110/0x110
[ 39.204264] ? do_raw_spin_lock+0x107/0x1c0
[ 39.204662] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.205107] worker_thread+0x74/0x7a0
[ 39.205451] ? process_one_work+0xbe0/0xbe0
[ 39.205818] kthread+0x171/0x1a0
[ 39.206111] ? kthread_complete_and_exit+0x20/0x20
[ 39.206552] ret_from_fork+0x1f/0x30
[ 39.206886] </TASK>
This happens because the call to __bpf_obj_drop_impl I added in the patch
adding support for stashing local kptrs doesn't disable migration. Prior
to that patch, __bpf_obj_drop_impl logic only ran when called by a BPF
progarm, whereas now it can be called from map free path, so it's
necessary to explicitly disable migration.
Also, refactor a bit to just call __bpf_obj_drop_impl directly instead
of bothering w/ dtor union and setting pointer-to-obj_drop.
Fixes:
c8e187540914 ("bpf: Support __kptr to local kptrs")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230313214641.3731908-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Wed, 15 Feb 2023 23:30:33 +0000 (17:30 -0600)]
tasks: Extract rcu_users out of union
In commit
3fbd7ee285b2b ("tasks: Add a count of task RCU users"), a
count on the number of RCU users was added to struct task_struct. This
was done so as to enable the removal of task_rcu_dereference(), and
allow tasks to be protected by RCU even after exiting and being removed
from the runqueue. In this commit, the 'refcount_t rcu_users' field that
keeps track of this refcount was put into a union co-located with
'struct rcu_head rcu', so as to avoid taking up any extra space in
task_struct. This was possible to do safely, because the field was only
ever decremented by a static set of specific callers, and then never
incremented again.
While this restriction of there only being a small, static set of users
of this field has worked fine, it prevents us from leveraging the field
to use RCU to protect tasks in other contexts.
During tracing, for example, it would be useful to be able to collect
some tasks that performed a certain operation, put them in a map, and
then periodically summarize who they are, which cgroup they're in, how
much CPU time they've utilized, etc. While this can currently be done
with 'usage', it becomes tricky when a task is already in a map, or if a
reference should only be taken if a task is valid and will not soon be
reaped. Ideally, we could do something like pass a reference to a map
value, and then try to acquire a reference to the task in an RCU read
region by using refcount_inc_not_zero().
Similarly, in sched_ext, schedulers are using integer pids to remember
tasks, and then looking them up with find_task_by_pid_ns(). This is
slow, error prone, and adds complexity. It would be more convenient and
performant if BPF schedulers could instead store tasks directly in maps,
and then leverage RCU to ensure they can be safely accessed with low
overhead.
Finally, overloading fields like this is error prone. Someone that wants
to use 'rcu_users' could easily overlook the fact that once the rcu
callback is scheduled, the refcount will go back to being nonzero, thus
precluding the use of refcount_inc_not_zero(). Furthermore, as described
below, it's possible to extract the fields of the union without changing
the size of task_struct.
There are several possible ways to enable this:
1. The lightest touch approach is likely the one proposed in this patch,
which is to simply extract 'rcu_users' and 'rcu' from the union, so
that scheduling the 'rcu' callback doesn't overwrite the 'rcu_users'
refcount. If we have a trusted task pointer, this would allow us to
use refcnt_inc_not_zero() inside of an RCU region to determine if we
can safely acquire a reference to the task and store it in a map. As
mentioned below, this can be done without changing the size of
task_struct, by moving the location of the union to another location
that has padding gaps we can fill in.
2. Removing 'refcount_t rcu_users', and instead having the entire task
be freed in an rcu callback. This is likely the most sound overall
design, though it changes the behavioral semantics exposed to
callers, who currently expect that a task that's successfully looked
up in e.g. the pid_list with find_task_by_pid_ns(), can always have a
'usage' reference acquired on them, as it's guaranteed to be >
0 until after the next gp. In order for this approach to work, we'd
have to audit all callers. This approach also slightly changes
behavior observed by user space by not invoking
trace_sched_process_free() until the whole task_struct is actually being
freed, rather than just after it's exited. It also may change
timings, as memory will be freed in an RCU callback rather than
immediately when the final 'usage' refcount drops to 0. This also is
arguably a benefit, as it provides more predictable performance to
callers who are refcounting tasks.
3. There may be other solutions as well that don't require changing the
layout of task_struct. For example, we could possibly do something
complex from the BPF side, such as listen for task exit and remove a
task from a map when the task is exiting. This would likely require
significant custom handling for task_struct in the verifier, so a
more generalizable solution is likely warranted.
As mentioned above, this patch proposes the lightest-touch approach
which allows callers elsewhere in the kernel to use 'rcu_users' to
ensure the lifetime of a task, by extracting 'rcu_users' and 'rcu' from
the union. There is no size change in task_struct with this patch.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230215233033.889644-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Mon, 13 Mar 2023 18:40:17 +0000 (11:40 -0700)]
bpf: fix precision propagation verbose logging
Fix wrong order of frame index vs register/slot index in precision
propagation verbose (level 2) output. It's wrong and very confusing as is.
Fixes:
529409ea92d5 ("bpf: propagate precision across all frames, not just the last one")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230313184017.4083374-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Sat, 11 Mar 2023 00:38:06 +0000 (16:38 -0800)]
Merge branch 'Support stashing local kptrs with bpf_kptr_xchg'
Dave Marchevsky says:
====================
Local kptrs are kptrs allocated via bpf_obj_new with a type specified in program
BTF. A BPF program which creates a local kptr has exclusive control of the
lifetime of the kptr, and, prior to terminating, must:
* free the kptr via bpf_obj_drop
* If the kptr is a {list,rbtree} node, add the node to a {list, rbtree},
thereby passing control of the lifetime to the collection
This series adds a third option:
* stash the kptr in a map value using bpf_kptr_xchg
As indicated by the use of "stash" to describe this behavior, the intended use
of this feature is temporary storage of local kptrs. For example, a sched_ext
([0]) scheduler may want to create an rbtree node for each new cgroup on cgroup
init, but to add that node to the rbtree as part of a separate program which
runs on enqueue. Stashing the node in a map_value allows its lifetime to outlive
the execution of the cgroup_init program.
Behavior:
There is no semantic difference between adding a kptr to a graph collection and
"stashing" it in a map. In both cases exclusive ownership of the kptr's lifetime
is passed to some containing data structure, which is responsible for
bpf_obj_drop'ing it when the container goes away.
Since graph collections also expect exclusive ownership of the nodes they
contain, graph nodes cannot be both stashed in a map_value and contained by
their corresponding collection.
Implementation:
Two observations simplify the verifier changes for this feature. First, kptrs
("referenced kptrs" until a recent renaming) require registration of a
dtor function as part of their acquire/release semantics, so that a referenced
kptr which is placed in a map_value is properly released when the map goes away.
We want this exact behavior for local kptrs, but with bpf_obj_drop as the dtor
instead of a per-btf_id dtor.
The second observation is that, in terms of identification, "referenced kptr"
and "local kptr" already don't interfere with one another. Consider the
following example:
struct node_data {
long key;
long data;
struct bpf_rb_node node;
};
struct map_value {
struct node_data __kptr *node;
};
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, int);
__type(value, struct map_value);
__uint(max_entries, 1);
} some_nodes SEC(".maps");
struct map_value *mapval;
struct node_data *res;
int key = 0;
res = bpf_obj_new(typeof(*res));
if (!res) { /* err handling */ }
mapval = bpf_map_lookup_elem(&some_nodes, &key);
if (!mapval) { /* err handling */ }
res = bpf_kptr_xchg(&mapval->node, res);
if (res)
bpf_obj_drop(res);
The __kptr tag identifies map_value's node as a referenced kptr, while the
PTR_TO_BTF_ID which bpf_obj_new returns - a type in some non-vmlinux,
non-module BTF - identifies res as a local kptr. Type tag on the pointer
indicates referenced kptr, while the type of the pointee indicates local kptr.
So using existing facilities we can tell the verifier about a "referenced kptr"
pointer to a "local kptr" pointee.
When kptr_xchg'ing a kptr into a map_value, the verifier can recognize local
kptr types and treat them like referenced kptrs with a properly-typed
bpf_obj_drop as a dtor.
Other implementation notes:
* We don't need to do anything special to enforce "graph nodes cannot be
both stashed in a map_value and contained by their corresponding collection"
* bpf_kptr_xchg both returns and takes as input a (possibly-null) owning
reference. It does not accept non-owning references as input by virtue
of requiring a ref_obj_id. By definition, if a program has an owning
ref to a node, the node isn't in a collection, so it's safe to pass
ownership via bpf_kptr_xchg.
Summary of patches:
* Patch 1 modifies BTF plumbing to support using bpf_obj_drop as a dtor
* Patch 2 adds verifier plumbing to support MEM_ALLOC-flagged param for
bpf_kptr_xchg
* Patch 3 adds selftests exercising the new behavior
Changelog:
v1 -> v2: https://lore.kernel.org/bpf/
20230309180111.1618459-1-davemarchevsky@fb.com/
Patch #s used below refer to the patch's position in v1 unless otherwise
specified.
Patches 1-3 were applied and are not included in v2.
Rebase onto latest bpf-next: "libbpf: Revert poisoning of strlcpy"
Patch 4: "bpf: Support __kptr to local kptrs"
* Remove !btf_is_kernel(btf) check, WARN_ON_ONCE instead (Alexei)
Patch 6: "selftests/bpf: Add local kptr stashing test"
* Add test which stashes 2 nodes and later unstashes one of them using a
separate BPF program (Alexei)
* Fix incorrect runner subtest name for original test (was
"rbtree_add_nodes")
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Fri, 10 Mar 2023 23:07:43 +0000 (15:07 -0800)]
selftests/bpf: Add local kptr stashing test
Add a new selftest, local_kptr_stash, which uses bpf_kptr_xchg to stash
a bpf_obj_new-allocated object in a map. Test the following scenarios:
* Stash two rb_nodes in an arraymap, don't unstash them, rely on map
free to destruct them
* Stash two rb_nodes in an arraymap, unstash the second one in a
separate program, rely on map free to destruct first
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Fri, 10 Mar 2023 23:07:42 +0000 (15:07 -0800)]
bpf: Allow local kptrs to be exchanged via bpf_kptr_xchg
The previous patch added necessary plumbing for verifier and runtime to
know what to do with non-kernel PTR_TO_BTF_IDs in map values, but didn't
provide any way to get such local kptrs into a map value. This patch
modifies verifier handling of bpf_kptr_xchg to allow MEM_ALLOC kptr
types.
check_reg_type is modified accept MEM_ALLOC-flagged input to
bpf_kptr_xchg despite such types not being in btf_ptr_types. This could
have been done with a MAYBE_MEM_ALLOC equivalent to MAYBE_NULL, but
bpf_kptr_xchg is the only helper that I can forsee using
MAYBE_MEM_ALLOC, so keep it special-cased for now.
The verifier tags bpf_kptr_xchg retval MEM_ALLOC if and only if the BTF
associated with the retval is not kernel BTF.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Fri, 10 Mar 2023 23:07:41 +0000 (15:07 -0800)]
bpf: Support __kptr to local kptrs
If a PTR_TO_BTF_ID type comes from program BTF - not vmlinux or module
BTF - it must have been allocated by bpf_obj_new and therefore must be
free'd with bpf_obj_drop. Such a PTR_TO_BTF_ID is considered a "local
kptr" and is tagged with MEM_ALLOC type tag by bpf_obj_new.
This patch adds support for treating __kptr-tagged pointers to "local
kptrs" as having an implicit bpf_obj_drop destructor for referenced kptr
acquire / release semantics. Consider the following example:
struct node_data {
long key;
long data;
struct bpf_rb_node node;
};
struct map_value {
struct node_data __kptr *node;
};
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, int);
__type(value, struct map_value);
__uint(max_entries, 1);
} some_nodes SEC(".maps");
If struct node_data had a matching definition in kernel BTF, the verifier would
expect a destructor for the type to be registered. Since struct node_data does
not match any type in kernel BTF, the verifier knows that there is no kfunc
that provides a PTR_TO_BTF_ID to this type, and that such a PTR_TO_BTF_ID can
only come from bpf_obj_new. So instead of searching for a registered dtor,
a bpf_obj_drop dtor can be assumed.
This allows the runtime to properly destruct such kptrs in
bpf_obj_free_fields, which enables maps to clean up map_vals w/ such
kptrs when going away.
Implementation notes:
* "kernel_btf" variable is renamed to "kptr_btf" in btf_parse_kptr.
Before this patch, the variable would only ever point to vmlinux or
module BTFs, but now it can point to some program BTF for local kptr
type. It's later used to populate the (btf, btf_id) pair in kptr btf
field.
* It's necessary to btf_get the program BTF when populating btf_field
for local kptr. btf_record_free later does a btf_put.
* Behavior for non-local referenced kptrs is not modified, as
bpf_find_btf_id helper only searches vmlinux and module BTFs for
matching BTF type. If such a type is found, btf_field_kptr's btf will
pass btf_is_kernel check, and the associated release function is
some one-argument dtor. If btf_is_kernel check fails, associated
release function is two-arg bpf_obj_drop_impl. Before this patch
only btf_field_kptr's w/ kernel or module BTFs were created.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Thaler [Wed, 8 Mar 2023 20:53:03 +0000 (20:53 +0000)]
bpf, docs: Explain helper functions
Add brief text about existence of helper functions, with details to go in
separate psABI text.
Note that text about runtime functions (kfuncs) is part of a separate patch,
not this one.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Link: https://lore.kernel.org/r/20230308205303.1308-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Thu, 9 Mar 2023 18:01:08 +0000 (10:01 -0800)]
bpf: Change btf_record_find enum parameter to field_mask
btf_record_find's 3rd parameter can be multiple enum btf_field_type's
masked together. The function is called with BPF_KPTR in two places in
verifier.c, so it works with masked values already.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Thu, 9 Mar 2023 18:01:07 +0000 (10:01 -0800)]
bpf: btf: Remove unused btf_field_info_type enum
This enum was added and used in commit
aa3496accc41 ("bpf: Refactor kptr_off_tab
into btf_record"). Later refactoring in commit
db559117828d ("bpf: Consolidate
spin_lock, timer management into btf_record") resulted in the enum
values no longer being used anywhere.
Let's remove them.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Marchevsky [Thu, 9 Mar 2023 18:01:06 +0000 (10:01 -0800)]
bpf: verifier: Rename kernel_type_name helper to btf_type_name
kernel_type_name was introduced in commit
9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
with type signature:
const char *kernel_type_name(u32 id)
At that time the function used global btf_vmlinux BTF for all id lookups. Later,
in commit
22dc4a0f5ed1 ("bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier"),
the type signature was changed to:
static const char *kernel_type_name(const struct btf* btf, u32 id)
With the btf parameter used for lookups instead of global btf_vmlinux.
The helper will function as expected for type name lookup using non-kernel BTFs,
and will be used for such in further patches in the series. Let's rename it to
avoid incorrect assumptions that might arise when seeing the current name.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:36 +0000 (22:59 -0800)]
selftests/bpf: Add local-storage-create benchmark
This patch tests how many kmallocs is needed to create and free
a batch of UDP sockets and each socket has a 64bytes bpf storage.
It also measures how fast the UDP sockets can be created.
The result is from my qemu setup.
Before bpf_mem_cache_alloc/free:
./bench -p 1 local-storage-create
Setting up benchmark 'local-storage-create'...
Benchmark 'local-storage-create' started.
Iter 0 ( 73.193us): creates 213.552k/s (213.552k/prod), 3.09 kmallocs/create
Iter 1 (-20.724us): creates 211.908k/s (211.908k/prod), 3.09 kmallocs/create
Iter 2 ( 9.280us): creates 212.574k/s (212.574k/prod), 3.12 kmallocs/create
Iter 3 ( 11.039us): creates 213.209k/s (213.209k/prod), 3.12 kmallocs/create
Iter 4 (-11.411us): creates 213.351k/s (213.351k/prod), 3.12 kmallocs/create
Iter 5 ( -7.915us): creates 214.754k/s (214.754k/prod), 3.12 kmallocs/create
Iter 6 ( 11.317us): creates 210.942k/s (210.942k/prod), 3.12 kmallocs/create
Summary: creates 212.789 ± 1.310k/s (212.789k/prod), 3.12 kmallocs/create
After bpf_mem_cache_alloc/free:
./bench -p 1 local-storage-create
Setting up benchmark 'local-storage-create'...
Benchmark 'local-storage-create' started.
Iter 0 ( 68.265us): creates 243.984k/s (243.984k/prod), 1.04 kmallocs/create
Iter 1 ( 30.357us): creates 238.424k/s (238.424k/prod), 1.04 kmallocs/create
Iter 2 (-18.712us): creates 232.963k/s (232.963k/prod), 1.04 kmallocs/create
Iter 3 (-15.885us): creates 238.879k/s (238.879k/prod), 1.04 kmallocs/create
Iter 4 ( 5.590us): creates 237.490k/s (237.490k/prod), 1.04 kmallocs/create
Iter 5 ( 8.577us): creates 237.521k/s (237.521k/prod), 1.04 kmallocs/create
Iter 6 ( -6.263us): creates 238.508k/s (238.508k/prod), 1.04 kmallocs/create
Summary: creates 237.298 ± 2.198k/s (237.298k/prod), 1.04 kmallocs/create
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-18-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:35 +0000 (22:59 -0800)]
selftests/bpf: Check freeing sk->sk_local_storage with sk_local_storage->smap is NULL
This patch tweats the socket_bind bpf prog to test the
local_storage->smap == NULL case in the bpf_local_storage_free()
code path. The idea is to create the local_storage with
the sk_storage_map's selem first. Then add the sk_storage_map2's selem
and then delete the earlier sk_storeage_map's selem.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-17-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:34 +0000 (22:59 -0800)]
selftests/bpf: Replace CHECK with ASSERT in test_local_storage
This patch migrates the CHECK macro to ASSERT macro.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-16-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:30 +0000 (22:59 -0800)]
bpf: Add bpf_local_storage_free()
This patch refactors local_storage freeing logic into
bpf_local_storage_free(). It is a preparation work for a later
patch that uses bpf_mem_cache_alloc/free. The other kfree(local_storage)
cases are also changed to bpf_local_storage_free(..., reuse_now = true).
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-12-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:29 +0000 (22:59 -0800)]
bpf: Add bpf_local_storage_rcu callback
The existing bpf_local_storage_free_rcu is renamed to
bpf_local_storage_free_trace_rcu. A new bpf_local_storage_rcu
callback is added to do the kfree instead of using kfree_rcu.
It is a preparation work for a later patch using
bpf_mem_cache_alloc/free.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-11-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:28 +0000 (22:59 -0800)]
bpf: Add bpf_selem_free()
This patch refactors the selem freeing logic into bpf_selem_free().
It is a preparation work for a later patch using
bpf_mem_cache_alloc/free. The other kfree(selem) cases
are also changed to bpf_selem_free(..., reuse_now = true).
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:27 +0000 (22:59 -0800)]
bpf: Add bpf_selem_free_rcu callback
Add bpf_selem_free_rcu() callback to do the kfree() instead
of using kfree_rcu. It is a preparation work for using
bpf_mem_cache_alloc/free in a later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:26 +0000 (22:59 -0800)]
bpf: Remove bpf_selem_free_fields*_rcu
This patch removes the bpf_selem_free_fields*_rcu. The
bpf_obj_free_fields() can be done before the call_rcu_trasks_trace()
and kfree_rcu(). It is needed when a later patch uses
bpf_mem_cache_alloc/free. In bpf hashtab, bpf_obj_free_fields()
is also called before calling bpf_mem_cache_free. The discussion
can be found in
https://lore.kernel.org/bpf/
f67021ee-21d9-bfae-6134-
4ca542fab843@linux.dev/
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:25 +0000 (22:59 -0800)]
bpf: Repurpose use_trace_rcu to reuse_now in bpf_local_storage
This patch re-purpose the use_trace_rcu to mean
if the freed memory can be reused immediately or not.
The use_trace_rcu is renamed to reuse_now. Other than
the boolean test is reversed, it should be a no-op.
The following explains the reason for the rename and how it will
be used in a later patch.
In a later patch, bpf_mem_cache_alloc/free will be used
in the bpf_local_storage. The bpf mem allocator will reuse
the freed memory immediately. Some of the free paths in
bpf_local_storage does not support memory to be reused immediately.
These paths are the "delete" elem cases from the bpf_*_storage_delete()
helper and the map_delete_elem() syscall. Note that "delete" elem
before the owner's (sk/task/cgrp/inode) lifetime ended is not
the common usage for the local storage.
The common free path, bpf_local_storage_destroy(), can reuse the
memory immediately. This common path means the storage stays with
its owner until the owner is destroyed.
The above mentioned "delete" elem paths that cannot
reuse immediately always has the 'use_trace_rcu == true'.
The cases that is safe for immediate reuse always have
'use_trace_rcu == false'. Instead of adding another arg
in a later patch, this patch re-purpose this arg
to reuse_now and have the test logic reversed.
In a later patch, 'reuse_now == true' will free to the
bpf_mem_cache_free() where the memory can be reused
immediately. 'reuse_now == false' will go through the
call_rcu_tasks_trace().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:24 +0000 (22:59 -0800)]
bpf: Remember smap in bpf_local_storage
This patch remembers which smap triggers the allocation
of a 'struct bpf_local_storage' object. The local_storage is
allocated during the very first selem added to the owner.
The smap pointer is needed when using the bpf_mem_cache_free
in a later patch because it needs to free to the correct
smap's bpf_mem_alloc object.
When a selem is being removed, it needs to check if it is
the selem that triggers the creation of the local_storage.
If it is, the local_storage->smap pointer will be reset to NULL.
This NULL reset is done under the local_storage->lock in
bpf_selem_unlink_storage_nolock() when a selem is being removed.
Also note that the local_storage may not go away even
local_storage->smap is NULL because there may be other
selem still stored in the local_storage.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:23 +0000 (22:59 -0800)]
bpf: Remove the preceding __ from __bpf_selem_unlink_storage
__bpf_selem_unlink_storage is taking the spin lock and there is
no name collision also. Having the preceding '__' is confusing
when reviewing the later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:22 +0000 (22:59 -0800)]
bpf: Remove __bpf_local_storage_map_alloc
bpf_local_storage_map_alloc() is the only caller of
__bpf_local_storage_map_alloc(). The remaining logic in
bpf_local_storage_map_alloc() is only a one liner setting
the smap->cache_idx.
Remove __bpf_local_storage_map_alloc() to simplify code.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:21 +0000 (22:59 -0800)]
bpf: Refactor codes into bpf_local_storage_destroy
This patch first renames bpf_local_storage_unlink_nolock to
bpf_local_storage_destroy(). It better reflects that it is only
used when the storage's owner (sk/task/cgrp/inode) is being kfree().
All bpf_local_storage_destroy's caller is taking the spin lock and
then free the storage. This patch also moves these two steps into
the bpf_local_storage_destroy.
This is a preparation work for a later patch that uses
bpf_mem_cache_alloc/free in the bpf_local_storage.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 8 Mar 2023 06:59:20 +0000 (22:59 -0800)]
bpf: Move a few bpf_local_storage functions to static scope
This patch moves the bpf_local_storage_free_rcu() and
bpf_selem_unlink_map() to static because they are
not used outside of bpf_local_storage.c.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Fri, 10 Mar 2023 06:19:09 +0000 (00:19 -0600)]
bpf/selftests: Fix send_signal tracepoint tests
The send_signal tracepoint tests are non-deterministically failing in
CI. The test works as follows:
1. Two pairs of file descriptors are created using the pipe() function.
One pair is used to communicate between a parent process -> child
process, and the other for the reverse direction.
2. A child is fork()'ed. The child process registers a signal handler,
notifies its parent that the signal handler is registered, and then
and waits for its parent to have enabled a BPF program that sends a
signal.
3. The parent opens and loads a BPF skeleton with programs that send
signals to the child process. The different programs are triggered by
different perf events (either NMI or normal perf), or by regular
tracepoints. The signal is delivered to the child whenever the child
triggers the program.
4. The child's signal handler is invoked, which sets a flag saying that
the signal handler was reached. The child then signals to the parent
that it received the signal, and the test ends.
The perf testcases (send_signal_perf{_thread} and
send_signal_nmi{_thread}) work 100% of the time, but the tracepoint
testcases fail non-deterministically because the tracepoint is not
always being fired for the child.
There are two tracepoint programs registered in the test:
'tracepoint/sched/sched_switch', and
'tracepoint/syscalls/sys_enter_nanosleep'. The child never intentionally
blocks, nor sleeps, so neither tracepoint is guaranteed to be triggered.
To fix this, we can have the child trigger the nanosleep program with a
usleep().
Before this patch, the test would fail locally every 2-3 runs. Now, it
doesn't fail after more than 1000 runs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230310061909.1420887-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 9 Mar 2023 22:41:31 +0000 (14:41 -0800)]
bpf: take into account liveness when propagating precision
When doing state comparison, if old state has register that is not
marked as REG_LIVE_READ, then we just skip comparison, regardless what's
the state of corresponing register in current state. This is because not
REG_LIVE_READ register is irrelevant for further program execution and
correctness. All good here.
But when we get to precision propagation, after two states were declared
equivalent, we don't take into account old register's liveness, and thus
attempt to propagate precision for register in current state even if
that register in old state was not REG_LIVE_READ anymore. This is bad,
because register in current state could be anything at all and this
could cause -EFAULT due to internal logic bugs.
Fix by taking into account REG_LIVE_READ liveness mark to keep the logic
in state comparison in sync with precision propagation.
Fixes:
a3ce685dd01a ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309224131.57449-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Fri, 10 Mar 2023 06:01:49 +0000 (22:01 -0800)]
bpf: ensure state checkpointing at iter_next() call sites
State equivalence check and checkpointing performed in is_state_visited()
employs certain heuristics to try to save memory by avoiding state checkpoints
if not enough jumps and instructions happened since last checkpoint. This leads
to unpredictability of whether a particular instruction will be checkpointed
and how regularly. While normally this is not causing much problems (except
inconveniences for predictable verifier tests, which we overcome with
BPF_F_TEST_STATE_FREQ flag), turns out it's not the case for open-coded
iterators.
Checking and saving state checkpoints at iter_next() call is crucial for fast
convergence of open-coded iterator loop logic, so we need to force it. If we
don't do that, is_state_visited() might skip saving a checkpoint, causing
unnecessarily long sequence of not checkpointed instructions and jumps, leading
to exhaustion of jump history buffer, and potentially other undesired outcomes.
It is expected that with correct open-coded iterators convergence will happen
quickly, so we don't run a risk of exhausting memory.
This patch adds, in addition to prune and jump instruction marks, also a
"forced checkpoint" mark, and makes sure that any iter_next() call instruction
is marked as such.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230310060149.625887-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Fri, 10 Mar 2023 16:14:08 +0000 (08:14 -0800)]
Merge branch 'selftests/bpf: make BPF_CFLAGS stricter with -Wall'
Andrii Nakryiko says:
====================
Make BPF-side compiler flags stricter by adding -Wall. Fix tons of small
issues pointed out by compiler immediately after that. That includes newly
added bpf_for(), bpf_for_each(), and bpf_repeat() macros.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 9 Mar 2023 05:40:15 +0000 (21:40 -0800)]
selftests/bpf: make BPF compiler flags stricter
We recently added -Wuninitialized, but it's not enough to catch various
silly mistakes or omissions. Let's go all the way to -Wall, just like we
do for user-space code.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 9 Mar 2023 05:40:14 +0000 (21:40 -0800)]
selftests/bpf: fix lots of silly mistakes pointed out by compiler
Once we enable -Wall for BPF sources, compiler will complain about lots
of unused variables, variables that are set but never read, etc.
Fix all these issues first before enabling -Wall in Makefile.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 9 Mar 2023 05:40:13 +0000 (21:40 -0800)]
selftests/bpf: add __sink() macro to fake variable consumption
Add __sink(expr) macro that forces compiler to believe that passed in
expression is both read and written. It used a simple embedded asm for
this. This is useful in a lot of tests where we assign value to some variable
to trigger some action, but later don't read variable, causing compiler
to complain (if corresponding compiler warnings are turned on, which
we'll do in the next patch).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 9 Mar 2023 05:40:12 +0000 (21:40 -0800)]
selftests/bpf: prevent unused variable warning in bpf_for()
Add __attribute__((unused)) to inner __p variable inside bpf_for(),
bpf_for_each(), and bpf_repeat() macros to avoid compiler warnings about
unused variable.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Fri, 10 Mar 2023 01:24:10 +0000 (17:24 -0800)]
selftests/bpf: Workaround verification failure for fexit_bpf2bpf/func_replace_return_code
With latest llvm17, selftest fexit_bpf2bpf/func_replace_return_code
has the following verification failure:
0: R1=ctx(off=0,imm=0) R10=fp0
; int connect_v4_prog(struct bpf_sock_addr *ctx)
0: (bf) r7 = r1 ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0)
1: (b4) w6 = 0 ; R6_w=0
; memset(&tuple.ipv4.saddr, 0, sizeof(tuple.ipv4.saddr));
...
; return do_bind(ctx) ? 1 : 0;
179: (bf) r1 = r7 ; R1=ctx(off=0,imm=0) R7=ctx(off=0,imm=0)
180: (85) call pc+147
Func#3 is global and valid. Skipping.
181: R0_w=scalar()
181: (bc) w6 = w0 ; R0_w=scalar() R6_w=scalar(umax=
4294967295,var_off=(0x0; 0xffffffff))
182: (05) goto pc-129
; }
54: (bc) w0 = w6 ; R0_w=scalar(umax=
4294967295,var_off=(0x0; 0xffffffff)) R6_w=scalar(umax=
4294967295,var_off=(0x0; 0xffffffff))
55: (95) exit
At program exit the register R0 has value (0x0; 0xffffffff) should have been in (0x0; 0x1)
processed 281 insns (limit 1000000) max_states_per_insn 1 total_states 26 peak_states 26 mark_read 13
-- END PROG LOAD LOG --
libbpf: prog 'connect_v4_prog': failed to load: -22
The corresponding source code:
__attribute__ ((noinline))
int do_bind(struct bpf_sock_addr *ctx)
{
struct sockaddr_in sa = {};
sa.sin_family = AF_INET;
sa.sin_port = bpf_htons(0);
sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);
if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
return 0;
return 1;
}
...
SEC("cgroup/connect4")
int connect_v4_prog(struct bpf_sock_addr *ctx)
{
...
return do_bind(ctx) ? 1 : 0;
}
Insn 180 is a call to 'do_bind'. The call's return value is also the return value
for the program. Since do_bind() returns 0/1, so it is legitimate for compiler to
optimize 'return do_bind(ctx) ? 1 : 0' to 'return do_bind(ctx)'. However, such
optimization breaks verifier as the return value of 'do_bind()' is marked as any
scalar which violates the requirement of prog return value 0/1.
There are two ways to fix this problem, (1) changing 'return 1' in do_bind() to
e.g. 'return 10' so the compiler has to do 'do_bind(ctx) ? 1 :0', or (2)
suggested by Andrii, marking do_bind() with __weak attribute so the compiler
cannot make any assumption on do_bind() return value.
This patch adopted adding __weak approach which is simpler and more resistant
to potential compiler optimizations.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230310012410.2920570-1-yhs@fb.com
Lorenzo Bianconi [Thu, 9 Mar 2023 17:32:41 +0000 (18:32 +0100)]
selftests/bpf: Improve error logs in XDP compliance test tool
Improve some error logs reported in the XDP compliance test tool.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/212fc5bd214ff706f6ef1acbe7272cf4d803ca9c.1678382940.git.lorenzo@kernel.org
Lorenzo Bianconi [Thu, 9 Mar 2023 17:32:40 +0000 (18:32 +0100)]
selftests/bpf: Use ifname instead of ifindex in XDP compliance test tool
Rely on interface name instead of interface index in error messages or
logs from XDP compliance test tool.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7dc5a8ff56c252b1a7ae29b059d0b2b1543c8b5d.1678382940.git.lorenzo@kernel.org
Michael Weiß [Thu, 9 Mar 2023 13:38:23 +0000 (14:38 +0100)]
bpf: Fix a typo for BPF_F_ANY_ALIGNMENT in bpf.h
Fix s/BPF_PROF_LOAD/BPF_PROG_LOAD/ typo in the documentation comment
for BPF_F_ANY_ALIGNMENT in bpf.h.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230309133823.944097-1-michael.weiss@aisec.fraunhofer.de
Martin KaFai Lau [Thu, 9 Mar 2023 06:02:44 +0000 (22:02 -0800)]
selftests/bpf: Fix flaky fib_lookup test
There is a report that fib_lookup test is flaky when running in parallel.
A symptom of slowness or delay. An example:
Testing IPv6 stale neigh
set_lookup_params:PASS:inet_pton(IPV6_IFACE_ADDR) 0 nsec
test_fib_lookup:PASS:bpf_prog_test_run_opts 0 nsec
test_fib_lookup:FAIL:fib_lookup_ret unexpected fib_lookup_ret: actual 0 != expected 7
test_fib_lookup:FAIL:dmac not match unexpected dmac not match: actual 1 != expected 0
dmac expected 11:11:11:11:11:11 actual 00:00:00:00:00:00
[ Note that the "fib_lookup_ret unexpected fib_lookup_ret actual 0 ..."
is reversed in terms of expected and actual value. Fixing in this
patch also. ]
One possibility is the testing stale neigh entry was marked dead by the
gc (in neigh_periodic_work). The default gc_stale_time sysctl is 60s.
This patch increases it to 15 mins.
It also:
- fixes the reversed arg (actual vs expected) in one of the
ASSERT_EQ test
- removes the nodad command arg when adding v4 neigh entry which
currently has a warning.
Fixes:
168de0233586 ("selftests/bpf: Add bpf_fib_lookup test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230309060244.3242491-1-martin.lau@linux.dev
Alexei Starovoitov [Thu, 9 Mar 2023 00:19:51 +0000 (16:19 -0800)]
Merge branch 'BPF open-coded iterators'
Andrii Nakryiko says:
====================
Add support for open-coded (aka inline) iterators in BPF world. This is a next
evolution of gradually allowing more powerful and less restrictive looping and
iteration capabilities to BPF programs.
We set up a framework for implementing all kinds of iterators (e.g., cgroup,
task, file, etc, iterators), but this patch set only implements numbers
iterator, which is used to implement ergonomic bpf_for() for-like construct
(see patches #4-#5). We also add bpf_for_each(), which is a generic
foreach-like construct that will work with any kind of open-coded iterator
implementation, as long as we stick with bpf_iter_<type>_{new,next,destroy}()
naming pattern (which we now enforce on the kernel side).
Patch #1 is preparatory refactoring for easier way to check for special kfunc
calls. Patch #2 is adding iterator kfunc registration and validation logic,
which is mostly independent from the rest of open-coded iterator logic, so is
separated out for easier reviewing.
The meat of verifier-side logic is in patch #3. Patch #4 implements numbers
iterator. I kept them separate to have clean reference for how to integrate
new iterator types (now even simpler to do than in v1 of this patch set).
Patch #5 adds bpf_for(), bpf_for_each(), and bpf_repeat() macros to
bpf_misc.h, and also adds yet another pyperf test variant, now with bpf_for()
loop. Patch #6 is verification tests, based on numbers iterator (as the only
available right now). Patch #7 actually tests runtime behavior of numbers
iterator.
Finally, with changes in v2, it's possible and trivial to implement custom
iterators completely in kernel modules, which we showcase and test by adding
a simple iterator returning same number a given number of times to
bpf_testmod. Patch #8 is where all this happens and is tested.
Most of the relevant details are in corresponding commit messages or code
comments.
v4->v5:
- fixing missed inner for() in is_iter_reg_valid_uninit, and fixed return
false (kernel test robot);
- typo fixes and comment/commit description improvements throughout the
patch set;
v3->v4:
- remove unused variable from is_iter_reg_valid_init (kernel test robot);
v2->v3:
- remove special kfunc leftovers for bpf_iter_num_{new,next,destroy};
- add iters/testmod_seq* to DENYLIST.s390x, it doesn't support kfuncs in
modules yet (CI);
v1->v2:
- rebased on latest, dropping previously landed preparatory patches;
- each iterator type now have its own `struct bpf_iter_<type>` which allows
each iterator implementation to use exactly as much stack space as
necessary, allowing to avoid runtime allocations (Alexei);
- reworked how iterator kfuncs are defined, no verifier changes are required
when adding new iterator type;
- added bpf_testmod-based iterator implementation;
- address the rest of feedback, comments, commit message adjustment, etc.
Cc: Tejun Heo <tj@kernel.org>
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Wed, 8 Mar 2023 18:41:21 +0000 (10:41 -0800)]
selftests/bpf: implement and test custom testmod_seq iterator
Implement a trivial iterator returning same specified integer value
N times as part of bpf_testmod kernel module. Add selftests to validate
everything works end to end.
We also reuse these tests as "verification-only" tests to validate that
kernel prints the state of custom kernel module-defined iterator correctly:
fp-16=iter_testmod_seq(ref_id=1,state=drained,depth=0)
"testmod_seq" part is an iterator type, and is coming from module's BTF
data dynamically at runtime.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Wed, 8 Mar 2023 18:41:20 +0000 (10:41 -0800)]
selftests/bpf: add number iterator tests
Add number iterator (bpf_iter_num_{new,next,destroy}()) tests,
validating the correct handling of various corner and common cases
*at runtime*.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Wed, 8 Mar 2023 18:41:19 +0000 (10:41 -0800)]
selftests/bpf: add iterators tests
Add various tests for open-coded iterators. Some of them excercise
various possible coding patterns in C, some go down to low-level
assembly for more control over various conditions, especially invalid
ones.
We also make use of bpf_for(), bpf_for_each(), bpf_repeat() macros in
some of these tests.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Wed, 8 Mar 2023 18:41:18 +0000 (10:41 -0800)]
selftests/bpf: add bpf_for_each(), bpf_for(), and bpf_repeat() macros
Add bpf_for_each(), bpf_for(), and bpf_repeat() macros that make writing
open-coded iterator-based loops much more convenient and natural. These
macros utilize cleanup attribute to ensure proper destruction of the
iterator and thanks to that manage to provide the ergonomics that is
very close to C language's for() construct. Typical loop would look like:
int i;
int arr[N];
bpf_for(i, 0, N) {
/* verifier will know that i >= 0 && i < N, so could be used to
* directly access array elements with no extra checks
*/
arr[i] = i;
}
bpf_repeat() is very similar, but it doesn't expose iteration number and
is meant as a simple "repeat action N times" loop:
bpf_repeat(N) { /* whatever, N times */ }
Note that `break` and `continue` statements inside the {} block work as
expected.
bpf_for_each() is a generalization over any kind of BPF open-coded
iterator allowing to use for-each-like approach instead of calling
low-level bpf_iter_<type>_{new,next,destroy}() APIs explicitly. E.g.:
struct cgroup *cg;
bpf_for_each(cgroup, cg, some, input, args) {
/* do something with each cg */
}
would call (not-yet-implemented) bpf_iter_cgroup_{new,next,destroy}()
functions to form a loop over cgroups, where `some, input, args` are
passed verbatim into constructor as
bpf_iter_cgroup_new(&it, some, input, args).
As a first demonstration, add pyperf variant based on the bpf_for() loop.
Also clean up a few tests that either included bpf_misc.h header
unnecessarily from the user-space, which is unsupported, or included it
before any common types are defined (and thus leading to unnecessary
compilation warnings, potentially).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Wed, 8 Mar 2023 18:41:17 +0000 (10:41 -0800)]
bpf: implement numbers iterator
Implement the first open-coded iterator type over a range of integers.
It's public API consists of:
- bpf_iter_num_new() constructor, which accepts [start, end) range
(that is, start is inclusive, end is exclusive).
- bpf_iter_num_next() which will keep returning read-only pointer to int
until the range is exhausted, at which point NULL will be returned.
If bpf_iter_num_next() is kept calling after this, NULL will be
persistently returned.
- bpf_iter_num_destroy() destructor, which needs to be called at some
point to clean up iterator state. BPF verifier enforces that iterator
destructor is called at some point before BPF program exits.
Note that `start = end = X` is a valid combination to setup an empty
iterator. bpf_iter_num_new() will return 0 (success) for any such
combination.
If bpf_iter_num_new() detects invalid combination of input arguments, it
returns error, resets iterator state to, effectively, empty iterator, so
any subsequent call to bpf_iter_num_next() will keep returning NULL.
BPF verifier has no knowledge that returned integers are in the
[start, end) value range, as both `start` and `end` are not statically
known and enforced: they are runtime values.
While the implementation is pretty trivial, some care needs to be taken
to avoid overflows and underflows. Subsequent selftests will validate
correctness of [start, end) semantics, especially around extremes
(INT_MIN and INT_MAX).
Similarly to bpf_loop(), we enforce that no more than BPF_MAX_LOOPS can
be specified.
bpf_iter_num_{new,next,destroy}() is a logical evolution from bounded
BPF loops and bpf_loop() helper and is the basis for implementing
ergonomic BPF loops with no statically known or verified bounds.
Subsequent patches implement bpf_for() macro, demonstrating how this can
be wrapped into something that works and feels like a normal for() loop
in C language.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>