review.tizen.org Git - platform/kernel/linux-exynos.git/log

net/mlx5e: Set vlan masks for all offloaded TC rules

[ Upstream commit cee26487620bc9bc3c7db21b6984d91f7bae12ae ]

In flow steering, if asked to, the hardware matches on the first ethertype
which is not vlan. It's possible to set a rule as follows, which is meant
to match on untagged packet, but will match on a vlan packet:
tc filter add dev eth0 parent ffff: protocol ip flower ...

To avoid this for packets with single tag, we set vlan masks to tell
hardware to check the tags for every matched packet.

Fixes: 095b6cfd69ce ('net/mlx5e: Add TC vlan match parsing')
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Fix unbind ordering

[ Upstream commit bf3b452b7af787b8bf27de6490dc4eedf6f97599 ]

The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.

Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.

Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/packet: fix packet drop as of virtio gso

[ Upstream commit 9d2f67e43b73e8af7438be219b66a5de0cfa8bd9 ]

When we use raw socket as the vhost backend, a packet from virito with
gso offloading information, cannot be sent out in later validaton at
xmit path, as we did not set correct skb->protocol which is further used
for looking up the gso function.

To fix this, we set this field according to virito hdr information.

Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Jianfeng Tan <jianfeng.tan@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fixup the tail addr setting in xmit path

[ Upstream commit 0431100b3d82c509729ece1ab22ada2484e209c1 ]

Currently we are always setting the tail address of descriptor list to
the end of the pre-allocated list.

According to databook this is not correct. Tail address should point to
the last available descriptor + 1, which means we have to update the
tail address everytime we call the xmit function.

This should make no impact in older versions of MAC but in newer
versions there are some DMA features which allows the IP to fetch
descriptors in advance and in a non sequential order so its critical
that we set the tail address correctly.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: f748be531d70 ("stmmac: support new GMAC4")
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: Unbreak modules that rely on external __skb_recv_udp() availability

[ Upstream commit 7e823644b60555f70f241274b8d0120dd919269a ]

Commit 2276f58ac589 ("udp: use a separate rx queue for packet reception")
turned static inline __skb_recv_udp() from being a trivial helper around
__skb_recv_datagram() into a UDP specific implementaion, making it
EXPORT_SYMBOL_GPL() at the same time.

There are external modules that got broken by __skb_recv_udp() not being
visible to them. Let's unbreak them by making __skb_recv_udp EXPORT_SYMBOL().

Rationale (one of those) why this is actually "technically correct" thing
to do: __skb_recv_udp() used to be an inline wrapper around
__skb_recv_datagram(), which itself (still, and correctly so, I believe)
is EXPORT_SYMBOL().

Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix flow control accounting for implicit connect

[ Upstream commit 92ef12b32feab8f277b69e9fb89ede2796777f4d ]

In the case of implicit connect message with data > 1K, the flow
control accounting is incorrect. At this state, the socket does not
know the peer nodes capability and falls back to legacy flow control
by return 1, however the receiver of this message will perform the
new block accounting. This leads to a slack and eventually traffic
disturbance.

In this commit, we perform tipc_node_get_capabilities() at implicit
connect and perform accounting based on the peer's capability.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: Forbid enslaving team device to itself

[ Upstream commit 471b83bd8bbe4e89743683ef8ecb78f7029d8288 ]

team's ndo_add_slave() acquires 'team->lock' and later tries to open the
newly enslaved device via dev_open(). This emits a 'NETDEV_UP' event
that causes the VLAN driver to add VLAN 0 on the team device. team's
ndo_vlan_rx_add_vid() will also try to acquire 'team->lock' and
deadlock.

Fix this by checking early at the enslavement function that a team
device is not being enslaved to itself.

A similar check was added to the bond driver in commit 09a89c219baf
("bonding: disallow enslaving a bond to itself").

WARNING: possible recursive locking detected
4.18.0-rc7+ #176 Not tainted
--------------------------------------------
syz-executor4/6391 is trying to acquire lock:
(____ptrval____) (&team->lock){+.+.}, at: team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868

but task is already holding lock:
(____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(&team->lock);
  lock(&team->lock);

*** DEADLOCK ***

May be due to missing lock nesting notation

2 locks held by syz-executor4/6391:
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4662
#1: (____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947

stack backtrace:
CPU: 1 PID: 6391 Comm: syz-executor4 Not tainted 4.18.0-rc7+ #176
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
check_deadlock kernel/locking/lockdep.c:1809 [inline]
validate_chain kernel/locking/lockdep.c:2405 [inline]
__lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
__mutex_lock_common kernel/locking/mutex.c:757 [inline]
__mutex_lock+0x176/0x1820 kernel/locking/mutex.c:894
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:909
team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868
vlan_add_rx_filter_info+0x14a/0x1d0 net/8021q/vlan_core.c:210
__vlan_vid_add net/8021q/vlan_core.c:278 [inline]
vlan_vid_add+0x63e/0x9d0 net/8021q/vlan_core.c:308
vlan_device_event.cold.12+0x2a/0x2f net/8021q/vlan.c:381
notifier_call_chain+0x180/0x390 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
call_netdevice_notifiers net/core/dev.c:1753 [inline]
dev_open+0x173/0x1b0 net/core/dev.c:1433
team_port_add drivers/net/team/team.c:1219 [inline]
team_add_slave+0xa8b/0x1c30 drivers/net/team/team.c:1948
do_set_master+0x1c9/0x220 net/core/rtnetlink.c:2248
do_setlink+0xba4/0x3e10 net/core/rtnetlink.c:2382
rtnl_setlink+0x2a9/0x400 net/core/rtnetlink.c:2636
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4665
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2455
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4683
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfd0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:642 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:652
___sys_sendmsg+0x7fd/0x930 net/socket.c:2126
__sys_sendmsg+0x11d/0x290 net/socket.c:2164
__do_sys_sendmsg net/socket.c:2173 [inline]
__se_sys_sendmsg net/socket.c:2171 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2171
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x456b29
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9706bf8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9706bf96d4 RCX: 0000000000456b29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d3548 R14: 00000000004c8227 R15: 0000000000000000

Fixes: 87002b03baab ("net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-and-tested-by: syzbot+bd051aba086537515cdb@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: update dst pmtu with the correct daddr

[ Upstream commit d7ab5cdce54da631f0c8c11e506c974536a3581e ]

When processing pmtu update from an icmp packet, it calls .update_pmtu
with sk instead of skb in sctp_transport_update_pmtu.

However for sctp, the daddr in the transport might be different from
inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or
create the route cache. The incorrect daddr will cause a different
route cache created for the path.

So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr
should be updated with the daddr in the transport, and update it back
after it's done.

The issue has existed since route exceptions introduction.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Reported-by: ian.periam@dialogic.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096

[ Upstream commit 0e1d6eca5113858ed2caea61a5adc03c595f6096 ]

We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.

Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.

A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.

Tested:

lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument

lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap

real 0m0.180s
user 0m0.000s
sys 0m0.107s

Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: fix rtnl_fdb_dump() for ndmsg header

[ Upstream commit bd961c9bc66497f0c63f4ba1d02900bb85078366 ]

Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg',
which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh').

The problem is, the function bails out early if nlmsg_parse() fails, which
does occur for iproute2 usage of 'struct ndmsg' because the payload length
is shorter than the family header alone (as 'struct ifinfomsg' is assumed).

This breaks backward compatibility with userspace -- nothing is sent back.

Some examples with iproute2 and netlink library for go [1]:

1) $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

      This one works, as it uses 'struct ifinfomsg'.

      fdb_show() @ iproute2/bridge/fdb.c
        """
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
        ...
        if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...]
        """

2) $ ip --family bridge neigh
    RTNETLINK answers: Invalid argument
    Dump terminated

      This one fails, as it uses 'struct ndmsg'.

      do_show_or_flush() @ iproute2/ip/ipneigh.c
        """
        .n.nlmsg_type = RTM_GETNEIGH,
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
        """

3) $ ./neighlist
    < no output >

      This one fails, as it uses 'struct ndmsg'-based.

      neighList() @ netlink/neigh_linux.go
        """
        req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...]
        msg := Ndmsg{
        """

The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink:
bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails
if the payload length (with the _actual_ family header) is less than the
family header length alone (which is assumed, in parameter 'hdrlen').
This is true in the examples above with struct ndmsg, with size and payload
length shorter than struct ifinfomsg.

However, that commit just intends to fix something under the assumption the
family header is indeed an 'struct ifinfomsg' - by preventing access to the
payload as such (via 'ifm' pointer) if the payload length is not sufficient
to actually contain it.

The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump
interface at par with brctl"), to support iproute2's 'bridge fdb' command
(not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken.

So, in order to unbreak the 'struct ndmsg' family headers and still allow
'struct ifinfomsg' to continue to work, check for the known message sizes
used with 'struct ndmsg' in iproute2 (with zero or one attribute which is
not used in this function anyway) then do not parse the data as ifinfomsg.

Same examples with this patch applied (or revert/before the original fix):

    $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

    $ ip --family bridge neigh
    dev ens3 lladdr 33:33:00:00:00:01 PERMANENT
    dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT
    dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT

    $ ./neighlist
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}

Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068).

References:

[1] netlink library for go (test-case)
    https://github.com/vishvananda/netlink

    $ cat ~/go/src/neighlist/main.go
    package main
    import ("fmt"; "syscall"; "github.com/vishvananda/netlink")
    func main() {
        neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE)
        for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) }
    }

    $ export GOPATH=~/go
    $ go get github.com/vishvananda/netlink
    $ go build neighlist
    $ ~/go/src/neighlist/neighlist

Thanks to David Ahern for suggestions to improve this patch.

Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error")
Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl")
Reported-by: Aidan Obley <aobley@pivotal.io>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface

[ Upstream commit 4f7617705bfff84d756fe4401a1f4f032f374984 ]

Added support for Gemalto's Cinterion ALASxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.

Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlcnic: fix Tx descriptor corruption on 82xx devices

[ Upstream commit c333fa0c4f220f8f7ea5acd6b0ebf3bf13fd684d ]

In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.

This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.

Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/usb: cancel pending work when unbinding smsc75xx

[ Upstream commit f7b2a56e1f3dcbdb4cf09b2b63e859ffe0e09df8 ]

Cancel pending work before freeing smsc75xx private data structure
during binding. This fixes the following crash in the driver:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: mutex_lock+0x2b/0x3f
<snipped>
Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx]
task: ffff8caa83e85700 task.stack: ffff948b80518000
RIP: 0010:mutex_lock+0x2b/0x3f
<snipped>
Call Trace:
smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx]
process_one_work+0x18d/0x2fc
worker_thread+0x1a2/0x269
? pr_cont_work+0x58/0x58
kthread+0xfa/0x10a
? pr_cont_work+0x58/0x58
? rcu_read_unlock_sched_notrace+0x48/0x48
ret_from_fork+0x22/0x40

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: Fix wake-up interrupt race during resume

[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ]

The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.

The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.

This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.

The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: Add policy validation for tc attributes

[ Upstream commit 8b4c3cdd9dd8290343ce959a132d3b334062c5b9 ]

A number of TC attributes are processed without proper validation
(e.g., length checks). Add a tca policy for all input attributes and use
when invoking nlmsg_parse.

The 2 Fixes tags below cover the latest additions. The other attributes
are a string (KIND), nested attribute (OPTIONS which does seem to have
validation in most cases), for dumps only or a flag.

Fixes: 5bc1701881e39 ("net: sched: introduce multichain support for filters")
Fixes: d47a6b0e7c492 ("net: sched: introduce ingress/egress block index attributes for qdisc")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: fix a txq_done race condition

[ Upstream commit 774268f3e51b53ed432a1ec516574fd5ba469398 ]

When no Tx IRQ is available, the txq_done() routine (called from
tx_done()) shouldn't be called from the polling function, as in such
case it is already called in the Tx path thanks to an hrtimer. This
mostly occurred when using PPv2.1, as the engine then do not have Tx
IRQs.

Fixes: edc660fa09e2 ("net: mvpp2: replace TX coalescing interrupts with hrtimer")
Reported-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: Extract the correct ethtype from the skb for tx csum offload

[ Upstream commit 35f3625c21852ad839f20c91c7d81c4c1101e207 ]

When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.

The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.

This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlabel: check for IPV4MASK in addrinfo_get

[ Upstream commit f88b4c01b97e09535505cf3c327fdbce55c27f00 ]

netlbl_unlabel_addrinfo_get() assumes that if it finds the
NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the
NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is
not necessarily the case as the current checks in
netlbl_unlabel_staticadd() and friends are not sufficent to
enforce this.

If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR,
NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes,
these functions will all call netlbl_unlabel_addrinfo_get() which
will then attempt dereference NULL when fetching the non-existent
NLBL_UNLABEL_A_IPV4MASK attribute:

Unable to handle kernel NULL pointer dereference at virtual address 0
Process unlab (pid: 31762, stack limit = 0xffffff80502d8000)
Call trace:
netlbl_unlabel_addrinfo_get+0x44/0xd8
netlbl_unlabel_staticremovedef+0x98/0xe0
genl_rcv_msg+0x354/0x388
netlink_rcv_skb+0xac/0x118
genl_rcv+0x34/0x48
netlink_unicast+0x158/0x1f0
netlink_sendmsg+0x32c/0x338
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Code: 51001149 7100113f 540000a0 f9401508 (79400108)
---[ end trace f6438a488e737143 ]---
Kernel panic - not syncing: Fatal exception

Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: Display all addresses in output of /proc/net/if_inet6

[ Upstream commit 86f9bd1ff61c413a2a251fa736463295e4e24733 ]

The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly
handle starting/stopping the iteration.  The problem is that at some point
during the iteration, an overflow is detected and the process is
subsequently stopped.  The item being shown via seq_printf() when the
overflow occurs is not actually shown, though.  When start() is
subsequently called to resume iterating, it returns the next item, and
thus the item that was being processed when the overflow occurred never
gets printed.

Alter the meaning of the private data member "offset".  Currently, when it
is not 0 (which only happens at the very beginning), "offset" represents
the next hlist item to be printed.  After this change, "offset" always
represents the current item.

This is also consistent with the private data member "bucket", which
represents the current bucket, and also the use of "pos" as defined in
seq_file.txt:
    The pos passed to start() will always be either zero, or the most
    recent pos used in the previous session.

Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: update fnhe_pmtu when first hop's MTU changes

[ Upstream commit af7d6cce53694a88d6a1bb60c9a239a6a5144459 ]

Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.

As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now
incorrect
- if the local MTU was the lowest value in the path, and is increased,
we might discover a higher PMTU

Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those
cases.

If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.

To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.

Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns: fix for unmapping problem when SMMU is on

[ Upstream commit 2e9361efa707e186d91b938e44f9e326725259f7 ]

If SMMU is on, there is more likely that skb_shinfo(skb)->frags[i]
can not send by a single BD. when this happen, the
hns_nic_net_xmit_hw function map the whole data in a frags using
skb_frag_dma_map, but unmap each BD' data individually when tx is
done, which causes problem when SMMU is on.

This patch fixes this problem by ummapping the whole data in a
frags when tx is done.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Call setup during switch resume

[ Upstream commit 54baca096386d862d19c10f58f34bf787c6b3cbe ]

There is no reason to open code what the switch setup function does, in
fact, because we just issued a switch reset, we would make all the
register get their default values, including for instance, having unused
port be enabled again and wasting power and leading to an inappropriate
switch core clock being selected.

Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: take rcu lock in rawv6_send_hdrinc()

[ Upstream commit a688caa34beb2fd2a92f1b6d33e40cde433ba160 ]

In rawv6_send_hdrinc(), in order to avoid an extra dst_hold(), we
directly assign the dst to skb and set passed in dst to NULL to avoid
double free.
However, in error case, we free skb and then do stats update with the
dst pointer passed in. This causes use-after-free on the dst.
Fix it by taking rcu read lock right before dst could get released to
make sure dst does not get freed until the stats update is done.
Note: we don't have this issue in ipv4 cause dst is not used for stats
update in v4.

Syzkaller reported following crash:
BUG: KASAN: use-after-free in rawv6_send_hdrinc net/ipv6/raw.c:692 [inline]
BUG: KASAN: use-after-free in rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921
Read of size 8 at addr ffff8801d95ba730 by task syz-executor0/32088

CPU: 1 PID: 32088 Comm: syz-executor0 Not tainted 4.19.0-rc2+ #93
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
rawv6_send_hdrinc net/ipv6/raw.c:692 [inline]
rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
__sys_sendmsg+0x11d/0x280 net/socket.c:2152
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg net/socket.c:2159 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457099
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f83756edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f83756ee6d4 RCX: 0000000000457099
RDX: 0000000000000000 RSI: 0000000020003840 RDI: 0000000000000004
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d4b30 R14: 00000000004c90b1 R15: 0000000000000000

Allocated by task 32088:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
kmem_cache_alloc+0x12e/0x730 mm/slab.c:3554
dst_alloc+0xbb/0x1d0 net/core/dst.c:105
ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:353
ip6_rt_cache_alloc+0x247/0x7b0 net/ipv6/route.c:1186
ip6_pol_route+0x8f8/0xd90 net/ipv6/route.c:1895
ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2093
fib6_rule_lookup+0x277/0x860 net/ipv6/fib6_rules.c:122
ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2121
ip6_route_output include/net/ip6_route.h:88 [inline]
ip6_dst_lookup_tail+0xe27/0x1d60 net/ipv6/ip6_output.c:951
ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
rawv6_sendmsg+0x12d9/0x4630 net/ipv6/raw.c:905
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
__sys_sendmsg+0x11d/0x280 net/socket.c:2152
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg net/socket.c:2159 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5356:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kmem_cache_free+0x83/0x290 mm/slab.c:3756
dst_destroy+0x267/0x3c0 net/core/dst.c:141
dst_destroy_rcu+0x16/0x19 net/core/dst.c:154
__rcu_reclaim kernel/rcu/rcu.h:236 [inline]
rcu_do_batch kernel/rcu/tree.c:2576 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2880 [inline]
__rcu_process_callbacks kernel/rcu/tree.c:2847 [inline]
rcu_process_callbacks+0xf23/0x2670 kernel/rcu/tree.c:2864
__do_softirq+0x30b/0xad8 kernel/softirq.c:292

Fixes: 1789a640f556 ("raw: avoid two atomics in xmit")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()

[ Upstream commit 64199fc0a46ba211362472f7f942f900af9492fd ]

Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.

Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: be careful when accessing the inner header

[ Upstream commit ccfec9e5cb2d48df5a955b7bf47f7782157d3bc2]

Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: be careful when accessing the inner header

[ Upstream commit 76c0ddd8c3a683f6e2c6e60e11dc1a1558caf4bc ]

the ip6 tunnel xmit ndo assumes that the processed skb always
contains an ip[v6] header, but syzbot has found a way to send
frames that fall short of this assumption, leading to the following splat:

BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307
[inline]
BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0
net/ipv6/ip6_tunnel.c:1390
CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x185/0x1d0 lib/dump_stack.c:53
  kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
  __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
  ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline]
  ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390
  __netdev_start_xmit include/linux/netdevice.h:4066 [inline]
  netdev_start_xmit include/linux/netdevice.h:4075 [inline]
  xmit_one net/core/dev.c:3026 [inline]
  dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042
  __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557
  dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
  packet_snd net/packet/af_packet.c:2944 [inline]
  packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
  __sys_sendmmsg+0x42d/0x800 net/socket.c:2136
  SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
  SyS_sendmmsg+0x63/0x90 net/socket.c:2162
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x441819
RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819
RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510
R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
  kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
  kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
  slab_post_alloc_hook mm/slab.h:445 [inline]
  slab_alloc_node mm/slub.c:2737 [inline]
  __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:984 [inline]
  alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
  sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
  packet_alloc_skb net/packet/af_packet.c:2803 [inline]
  packet_snd net/packet/af_packet.c:2894 [inline]
  packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
  __sys_sendmmsg+0x42d/0x800 net/socket.c:2136
  SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
  SyS_sendmmsg+0x63/0x90 net/socket.c:2162
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

This change addresses the issue adding the needed check before
accessing the inner header.

The ipv4 side of the issue is apparently there since the ipv4 over ipv6
initial support, and the ipv6 side predates git history.

Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: avoid possible dead-lock

[ Upstream commit d4859d749aa7090ffb743d15648adb962a1baeae ]

Syzkaller reported this on a slightly older kernel but it's still
applicable to the current kernel -

======================================================
WARNING: possible circular locking dependency detected
4.18.0-next-20180823+ #46 Not tainted
------------------------------------------------------
syz-executor4/26841 is trying to acquire lock:
00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652

but task is already holding lock:
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (rtnl_mutex){+.+.}:
       __mutex_lock_common kernel/locking/mutex.c:925 [inline]
       __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
       mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
       rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
       bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline]
       bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320
       process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153
       worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
       kthread+0x35a/0x420 kernel/kthread.c:246
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

-> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}:
       process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129
       worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
       kthread+0x35a/0x420 kernel/kthread.c:246
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

-> #0 ((wq_completion)bond_dev->name){+.+.}:
       lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
       flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
       drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
       destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
       __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
       bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
       register_netdevice+0x337/0x1100 net/core/dev.c:8410
       bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
       rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
       rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
       netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
       rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
       netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
       netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
       netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
       sock_sendmsg_nosec net/socket.c:622 [inline]
       sock_sendmsg+0xd5/0x120 net/socket.c:632
       ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
       __sys_sendmsg+0x11d/0x290 net/socket.c:2153
       __do_sys_sendmsg net/socket.c:2162 [inline]
       __se_sys_sendmsg net/socket.c:2160 [inline]
       __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
       do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

Chain exists of:
  (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock((work_completion)(&(&nnw->work)->work));
                               lock(rtnl_mutex);
  lock((wq_completion)bond_dev->name);

*** DEADLOCK ***

1 lock held by syz-executor4/26841:

stack backtrace:
CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222
check_prev_add kernel/locking/lockdep.c:1862 [inline]
check_prevs_add kernel/locking/lockdep.c:1975 [inline]
validate_chain kernel/locking/lockdep.c:2416 [inline]
__lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412
lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
__alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
register_netdevice+0x337/0x1100 net/core/dev.c:8410
bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:632
___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
__sys_sendmsg+0x11d/0x290 net/socket.c:2153
__do_sys_sendmsg net/socket.c:2162 [inline]
__se_sys_sendmsg net/socket.c:2160 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457089
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: free hwrm resources, if driver probe fails.

[ Upstream commit a2bf74f4e1b82395dad2b08d2a911d9151db71c1 ]

When the driver probe fails, all the resources that were allocated prior
to the failure must be freed. However, hwrm dma response memory is not
getting freed.

This patch fixes the problem described above.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix TX timeout during netpoll.

[ Upstream commit 73f21c653f930f438d53eed29b5e4c65c8a0f906 ]

The current netpoll implementation in the bnxt_en driver has problems
that may miss TX completion events. bnxt_poll_work() in effect is
only handling at most 1 TX packet before exiting. In addition,
there may be in flight TX completions that ->poll() may miss even
after we fix bnxt_poll_work() to handle all visible TX completions.
netpoll may not call ->poll() again and HW may not generate IRQ
because the driver does not ARM the IRQ when the budget (0 for netpoll)
is reached.

We fix it by handling all TX completions and to always ARM the IRQ
when we exit ->poll() with 0 budget.

Also, the logic to ACK the completion ring in case it is almost filled
with TX completions need to be adjusted to take care of the 0 budget
case, as discussed with Eric Dumazet <edumazet@google.com>

Reported-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.76

ath10k: fix scan crash due to incorrect length calculation

commit c8291988806407e02a01b4b15b4504eafbcc04e0 upstream.

Length of WMI scan message was not calculated correctly. The allocated
buffer was smaller than what we expected. So WMI message corrupted
skb_info, which is at the end of skb->data. This fix takes TLV header
into account even if the element is zero-length.

Crash log:
  [49.629986] Unhandled kernel unaligned access[#1]:
  [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180
  [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000
  [49.646608] $ 0   : 00000000 00000001 80984a80 00000000
  [49.652038] $ 4   : 45259e89 8046d484 8046df30 8024ba70
  [49.657468] $ 8   : 00000000 804cc4c0 00000001 20306320
  [49.662898] $12   : 33322037 000110f2 00000000 31203930
  [49.668327] $16   : 82792b40 80984a80 00000001 804207fc
  [49.673757] $20   : 00000000 0000012c 00000040 80470000
  [49.679186] $24   : 00000000 8024af7c
  [49.684617] $28   : 8329c000 8329db88 00000001 802c58d0
  [49.690046] Hi    : 00000000
  [49.693022] Lo    : 453c0000
  [49.696013] epc   : 800efae4 put_page+0x0/0x58
  [49.700615] ra    : 802c58d0 skb_release_data+0x148/0x1d4
  [49.706184] Status: 1000fc03 KERNEL EXL IE
  [49.710531] Cause : 00800010 (ExcCode 04)
  [49.714669] BadVA : 45259e89
  [49.717644] PrId  : 00019374 (MIPS 24Kc)

Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: fix increment of vb->num_pfns in fill_balloon()

commit d9e427f6ab8142d6868eb719e6a7851aafea56b6 upstream.

commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM")
changed code to increment vb->num_pfns before call to
set_page_pfns(), which used to happen only after.

This patch fixes boot hang for me on ppc64le KVM guests.

Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: fix deadlock on OOM

commit c7cdff0e864713a089d7cb3a2b1136ba9a54881a upstream.

fill_balloon doing memory allocations under balloon_lock
can cause a deadlock when leak_balloon is called from
virtballoon_oom_notify and tries to take same lock.

To fix, split page allocation and enqueue and do allocations outside the lock.

Here's a detailed analysis of the deadlock by Tetsuo Handa:

In leak_balloon(), mutex_lock(&vb->balloon_lock) is called in order to
serialize against fill_balloon(). But in fill_balloon(),
alloc_page(GFP_HIGHUSER[_MOVABLE] | __GFP_NOMEMALLOC | __GFP_NORETRY) is
called with vb->balloon_lock mutex held. Since GFP_HIGHUSER[_MOVABLE]
implies __GFP_DIRECT_RECLAIM | __GFP_IO | __GFP_FS, despite __GFP_NORETRY
is specified, this allocation attempt might indirectly depend on somebody
else's __GFP_DIRECT_RECLAIM memory allocation. And such indirect
__GFP_DIRECT_RECLAIM memory allocation might call leak_balloon() via
virtballoon_oom_notify() via blocking_notifier_call_chain() callback via
out_of_memory() when it reached __alloc_pages_may_oom() and held oom_lock
mutex. Since vb->balloon_lock mutex is already held by fill_balloon(), it
will cause OOM lockup.

  Thread1                                       Thread2
    fill_balloon()
      takes a balloon_lock
      balloon_page_enqueue()
        alloc_page(GFP_HIGHUSER_MOVABLE)
          direct reclaim (__GFP_FS context)       takes a fs lock
            waits for that fs lock                  alloc_page(GFP_NOFS)
                                                      __alloc_pages_may_oom()
                                                        takes the oom_lock
                                                        out_of_memory()
                                                          blocking_notifier_call_chain()
                                                            leak_balloon()
                                                              tries to take that balloon_lock and deadlocks

Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: rds_ib_recv_alloc_cache() should call alloc_percpu_gfp() instead

commit f394ad28feffbeebab77c8bf9a203bd49b957c9a upstream.

Currently, rds_ib_conn_alloc() calls rds_ib_recv_alloc_caches()
without passing along the gfp_t flag. But rds_ib_recv_alloc_caches()
and rds_ib_recv_alloc_cache() should take a gfp_t parameter so that
rds_ib_recv_alloc_cache() can call alloc_percpu_gfp() using the
correct flag instead of calling alloc_percpu().

Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Check for name being NULL while mounting

commit 37f31b6ca4311b94d985fb398a72e5399ad57925 upstream.

The requested device name can be NULL or an empty string.
Check for that and refuse to continue. UBIFS has to do this manually
since we cannot use mount_bdev(), which checks for this condition.

Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system")
Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ucma: fix a use-after-free in ucma_resolve_ip()

commit 5fe23f262e0548ca7f19fb79f89059a60d087d22 upstream.

There is a race condition between ucma_close() and ucma_resolve_ip():

CPU0 CPU1
ucma_resolve_ip(): ucma_close():

ctx = ucma_get_ctx(file, cmd.id);

        list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) {
                mutex_lock(&mut);
                idr_remove(&ctx_idr, ctx->id);
                mutex_unlock(&mut);
...
                mutex_lock(&mut);
                if (!ctx->closing) {
                        mutex_unlock(&mut);
                        rdma_destroy_id(ctx->cm_id);
...
                ucma_free_ctx(ctx);

ret = rdma_resolve_addr();
ucma_put_ctx(ctx);

Before idr_remove(), ucma_get_ctx() could still find the ctx
and after rdma_destroy_id(), rdma_resolve_addr() may still
access id_priv pointer. Also, ucma_put_ctx() may use ctx after
ucma_free_ctx() too.

ucma_close() should call ucma_put_ctx() too which tests the
refcnt and waits for the last one releasing it. The similar
pattern is already used by ucma_destroy_id().

Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com
Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix invalid memory access

commit d3f07c049dab1a3f1740f476afd3d5e5b738c21c upstream.

syzbot found the following crash on:

HEAD commit:    d9bd94c0bcaa Add linux-next specific files for 20180801
git tree:       linux-next
console output: https://syzkaller.appspot.com/x/log.txt?x=1001189c400000
kernel config:  https://syzkaller.appspot.com/x/.config?x=cc8964ea4d04518c
link: https://syzkaller.appspot.com/bug?extid=c966a82db0b14aa37e81
compiler:       gcc (GCC) 8.0.1 20180413 (experimental)

Unfortunately, I don't have any reproducer for this crash yet.

IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+c966a82db0b14aa37e81@syzkaller.appspotmail.com
loop7: rw=12288, want=8200, limit=20
netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'.
openvswitch: netlink: Message has 8 unknown bytes.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 1 PID: 7615 Comm: syz-executor7 Not tainted 4.18.0-rc7-next-20180801+ #29
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline]
RIP: 0010:compound_head include/linux/page-flags.h:142 [inline]
RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline]
RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline]
RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835
Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00
RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000
RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005
RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026
R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb
R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40
FS:  00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
f2fs_get_valid_checkpoint+0x436/0x1ec0 fs/f2fs/checkpoint.c:860
f2fs_fill_super+0x2d42/0x8110 fs/f2fs/super.c:2883
mount_bdev+0x314/0x3e0 fs/super.c:1344
f2fs_mount+0x3c/0x50 fs/f2fs/super.c:3133
legacy_get_tree+0x131/0x460 fs/fs_context.c:729
vfs_get_tree+0x1cb/0x5c0 fs/super.c:1743
do_new_mount fs/namespace.c:2603 [inline]
do_mount+0x6f2/0x1e20 fs/namespace.c:2927
ksys_mount+0x12d/0x140 fs/namespace.c:3143
__do_sys_mount fs/namespace.c:3157 [inline]
__se_sys_mount fs/namespace.c:3154 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3154
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45943a
Code: b8 a6 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 bd 8a fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 9a 8a fb ff c3 66 0f 1f 84 00 00 00 00 00
RSP: 002b:00007f36a61d4a88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f36a61d4b30 RCX: 000000000045943a
RDX: 00007f36a61d4ad0 RSI: 0000000020000100 RDI: 00007f36a61d4af0
RBP: 0000000020000100 R08: 00007f36a61d4b30 R09: 00007f36a61d4ad0
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000013
R13: 0000000000000000 R14: 00000000004c8ea0 R15: 0000000000000000
Modules linked in:
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace bd8550c129352286 ]---
RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline]
RIP: 0010:compound_head include/linux/page-flags.h:142 [inline]
RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline]
RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline]
RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835
Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00
RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000
RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005
netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'.
RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026
openvswitch: netlink: Message has 8 unknown bytes.
R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb
R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40
FS:  00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In validate_checkpoint(), if we failed to call get_checkpoint_version(), we
will pass returned invalid page pointer into f2fs_put_page, cause accessing
invalid memory, this patch tries to handle error path correctly to fix this
issue.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

perf utils: Move is_directory() to path.h

commit 06c3f2aa9fc68e7f3fe3d83e7569d2a2801d9f99 upstream.

So that it can be used more widely, like in the next patch, when it will
be used to fix a bug in 'perf test' handling of dirent.d_type ==
DT_UNKNOWN.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171206174535.25380-1-jolsa@kernel.org
[ Split from a larger patch, removed needless includes in path.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: chelsio - Fix memory corruption in DMA Mapped buffers.

commit add92a817e60e308a419693413a38d9d1e663aff upstream.

Update PCI Id in "cpl_rx_phys_dsgl" header. In case pci_chan_id and
tx_chan_id are not derived from same queue, H/W can send request
completion indication before completing DMA Transfer.

Herbert, It would be good if fix can be merge to stable tree.
For 4.14 kernel, It requires some update to avoid mege conficts.

Cc: <stable@vger.kernel.org>
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: clone syscall to setp r25 as thread pointer

commit c58a584f05e35d1d4342923cd7aac07d9c3d3d16 upstream.

Per ARC TLS ABI, r25 is designated TP (thread pointer register).
However so far kernel didn't do any special treatment, like setting up
usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime
to do this, in say clone libc wrapper [1]. This was deliberate to keep
kernel ABI agnostic (userspace could potentially change TP, specially
for different ARC ISA say ARCompact vs. ARCv2 with different spare
registers etc)

However userspace setting up r25, after clone syscall opens a race, if
child is not scheduled and gets a signal instead. It starts off in
userspace not in clone but in a signal handler and anything TP sepcific
there such as pthread_self() fails which showed up with uClibc
testsuite nptl/tst-kill6 [2]

Fix this by having kernel populate r25 to TP value. So this locks in
ABI, but it was not going to change anyways, and fwiw is same for both
ARCompact (arc700 core) and ARCvs (HS3x cores)

[1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S
[2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c

Fixes: ARC STAR 9001378481
Cc: stable@vger.kernel.org
Reported-by: Nikita Sobolev <sobolev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/lib: fix book3s/32 boot failure due to code patching

commit b45ba4a51cde29b2939365ef0c07ad34c8321789 upstream.

Commit 51c3c62b58b3 ("powerpc: Avoid code patching freed init
sections") accesses 'init_mem_is_free' flag too early, before the
kernel is relocated. This provokes early boot failure (before the
console is active).

As it is not necessary to do this verification that early, this
patch moves the test into patch_instruction() instead of
__patch_instruction().

This modification also has the advantage of avoiding unnecessary
remappings.

Fixes: 51c3c62b58b3 ("powerpc: Avoid code patching freed init sections")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Avoid code patching freed init sections

commit 51c3c62b58b357e8d35e4cc32f7b4ec907426fe3 upstream.

This stops us from doing code patching in init sections after they've
been freed.

In this chain:
  kvm_guest_init() ->
    kvm_use_magic_page() ->
      fault_in_pages_readable() ->
__get_user() ->
   __get_user_nocheck() ->
     barrier_nospec();

We have a code patching location at barrier_nospec() and
kvm_guest_init() is an init function. This whole chain gets inlined,
so when we free the init section (hence kvm_guest_init()), this code
goes away and hence should no longer be patched.

We seen this as userspace memory corruption when using a memory
checker while doing partition migration testing on powervm (this
starts the code patching post migration via
/sys/kernel/mobility/migration). In theory, it could also happen when
using /sys/kernel/debug/powerpc/barrier_nospec.

Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/lib/code-patching: refactor patch_instruction()

commit 8cf4c05712f04a405f0dacebcca8f042b391694a upstream.

patch_instruction() uses almost the same sequence as
__patch_instruction()

This patch refactor it so that patch_instruction() uses
__patch_instruction() instead of duplicating code.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme_fc: fix ctrl create failures racing with workq items

commit cf25809bec2c7df4b45df5b2196845d9a4a3c89b upstream.

If there are errors during initial controller create, the transport
will teardown the partially initialized controller struct and free
the ctlr memory. Trouble is - most of those errors can occur due
to asynchronous events happening such io timeouts and subsystem
connectivity failures. Those failures invoke async workq items to
reset the controller and attempt reconnect. Those may be in progress
as the main thread frees the ctrl memory, resulting in NULL ptr oops.

Prevent this from happening by having the main ctrl failure thread
changing state to DELETING followed by synchronously cancelling any
pending queued work item. The change of state will prevent the
scheduling of resets or reconnect events.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix kernel panic issue during pci probe

commit 50e79e25250bf928369996277e85b00536b380c7 upstream.

If device gone during chip reset, ar->normal_mode_fw.board is not
initialized, but ath10k_debug_print_hwfw_info() will try to access its
member, which will cause 'kernel NULL pointer' issue. This was found
using a faulty device (pci link went down sometimes) in a random
insmod/rmmod/other-op test.
To fix it, check ar->normal_mode_fw.board before accessing the member.

pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit]
ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
ath10k_pci 0000:02:00.0: failed to read device register, device is gone
ath10k_pci 0000:02:00.0: failed to wait for target init: -5
ath10k_pci 0000:02:00.0: failed to warm reset: -5
ath10k_pci 0000:02:00.0: firmware crashed during chip reset
ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a)
ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000
ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1
ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000
...
BUG: unable to handle kernel NULL pointer dereference at 00000004
...
Call Trace:
[<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core]
[<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci]
[<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci]
[<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci]
[<c10477fb>] ? do_page_fault+0xb/0x10
[<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core]
[<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410
[<c10477f0>] ? __do_page_fault+0x480/0x480
[<c1068e44>] process_one_work+0x114/0x3e0
[<c1069d07>] worker_thread+0x37/0x4a0
[<c106e294>] kthread+0xa4/0xc0
[<c1069cd0>] ? create_worker+0x180/0x180
[<c106e1f0>] ? kthread_park+0x50/0x50
[<c18ab4f7>] ret_from_fork+0x1b/0x28
Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00
89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00
EIP: [<fb4e7754>]-
ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core]
SS:ESP 0068:f4921d90
CR2: 0000000000000004

Signed-off-by: Yu Wang <yyuwang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[AmitP: Minor rebasing for 4.14.y and 4.9.y]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait

commit 9ef0f58ed7b4a55da4a64641d538e0d9e46579ac upstream.

The skb may be freed in tx completion context before
trace_ath10k_wmi_cmd is called. This can be easily captured when
KASAN(Kernel Address Sanitizer) is enabled. The fix is to move
trace_ath10k_wmi_cmd before the send operation. As the ret has no
meaning in trace_ath10k_wmi_cmd then, so remove this parameter too.

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix python extension build for gcc 8

commit b7a313d84e853049062011d78cb04b6decd12f5c upstream.

The gcc 8 compiler won't compile the python extension code with the
following errors (one example):

  python.c:830:15: error: cast between incompatible  function types from              \
  ‘PyObject * (*)(struct pyrf_evsel *, PyObject *, PyObject *)’                       \
  uct _object * (*)(struct pyrf_evsel *, struct _object *, struct _object *)’} to     \
  ‘PyObject * (*)(PyObject *, PyObject *)’ {aka ‘struct _object * (*)(struct _objeuct \
  _object *)’} [-Werror=cast-function-type]
     .ml_meth  = (PyCFunction)pyrf_evsel__open,

The problem with the PyMethodDef::ml_meth callback is that its type is
determined based on the PyMethodDef::ml_flags value, which we set as
METH_VARARGS | METH_KEYWORDS.

That indicates that the callback is expecting an extra PyObject* arg, and is
actually PyCFunctionWithKeywords type, but the base PyMethodDef::ml_meth type
stays PyCFunction.

Previous gccs did not find this, gcc8 now does. Fixing this by silencing this
warning for python.c build.

Commiter notes:

Do not do that for CC=clang, as it breaks the build in some clang
versions, like the ones in fedora up to fedora27:

  fedora:25:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
  fedora:26:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
  fedora:27:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
  #

those have:

  clang version 3.9.1 (tags/RELEASE_391/final)

The one in rawhide accepts that:

  clang version 6.0.0 (tags/RELEASE_600/final)

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf annotate: Use asprintf when formatting objdump command line

commit 6810158d526e483868e519befff407b91e76b3db upstream.

We were using a local buffer with an arbitrary size, that would have to
get increased to avoid truncation as warned by gcc 8:

  util/annotate.c: In function 'symbol__disassemble':
  util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=]
      "%s %s%s --start-address=0x%016" PRIx64
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/annotate.c:1498:20:
      symfs_filename, symfs_filename);
                      ~~~~~~~~~~~~~~
  util/annotate.c:1490:50: note: format string is defined here
      " -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand",
                                                  ^~
  In file included from /usr/include/stdio.h:861,
                   from util/color.h:5,
                   from util/sort.h:8,
                   from util/annotate.c:14:
  /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

So switch to asprintf, that will make sure enough space is available.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qagoy2dmbjpc9gdnaj0r3mml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: unittest: Disable interrupt node tests for old world MAC systems

commit 8894891446c9380709451b99ab45c5c53adfd2fc upstream.

On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the
devicetree interrupt parsing code is different, causing unit tests of
devicetree interrupt nodes to fail. Due to a bug in unittest code, which
tries to dereference an uninitialized pointer, this results in a crash.

OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc08e9468
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1
task: cf8e0000 task.stack: cf8da000
NIP:  c08e9468 LR: c08ea5bc CTR: c08ea5ac
REGS: cf8dbb50 TRAP: 0300   Not tainted  (4.14.72-rc1-yocto-standard+)
MSR:  00001032 <ME,IR,DR,RI>  CR: 82004044  XER: 00000000
DAR: 00bc616e DSISR: 40000000
GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002
GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000
GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8
GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517

NIP [c08e9468] device_node_gen_full_name+0x30/0x15c
LR [c08ea5bc] device_node_string+0x190/0x3c8
Call Trace:
[cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable)
[cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8
[cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0
[cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec
[cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48
[cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c
[cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130
[cf8dbdd0] [c008ff54] printk+0x5c/0x6c
[cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8
[cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184
[cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8
[cf8dbf30] [c0004814] kernel_init+0x24/0x118
[cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64

The problem was observed when running a qemu test for the g3beige machine
with devicetree unittests enabled.

Disable interrupt node tests on affected systems to avoid both false
unittest failures and the crash.

With this patch in place, unittest on the affected system passes with
the following message.

dt-test ### end of unittest - 144 passed, 0 failed

Fixes: 53a42093d96ef ("of: Add device tree selftests")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Drop tty->count on tty_reopen() failure

commit fe32416790093b31364c08395727de17ec96ace1 upstream.

In case of tty_ldisc_reinit() failure, tty->count should be decremented
back, otherwise we will never release_tty().
Tetsuo reported that it fixes noisy warnings on tty release like:
pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0))

Fixes: commit 892d1fa7eaae ("tty: Destroy ldisc instance on hangup")

Cc: stable@vger.kernel.org # v4.6+
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Jiri Slaby <jslaby@suse.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc_acm: Do not leak URB buffers

commit f2924d4b16ae138c2de6a0e73f526fb638330858 upstream.

When the ACM TTY port is disconnected, the URBs it uses must be killed, and
then the buffers must be freed. Unfortunately a previous refactor removed
the code freeing the buffers because it looked extremely similar to the
code killing the URBs.

As a result, there were many new leaks for each plug/unplug cycle of a
CDC-ACM device, that were detected by kmemleak.

Restore the missing code, and the memory leak is removed.

Fixes: ba8c931ded8d ("cdc-acm: refactor killing urbs")
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: simple: add Motorola Tetra MTP6550 id

commit f5fad711c06e652f90f581fc7c2caee327c33d31 upstream.

Add device-id for the Motorola Tetra radio MTP6550.

Bus 001 Device 004: ID 0cad:9012 Motorola CGISS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0cad Motorola CGISS
  idProduct          0x9012
  bcdDevice           24.16
  iManufacturer           1 Motorola Solutions, Inc.
  iProduct                2 TETRA PEI interface
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           55
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          3 Generic Serial config
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Reported-by: Hans Hult <hanshult35@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: resume USB3 roothub first

commit 555df5820e733cded7eb8d0bf78b2a791be51d75 upstream.

Give USB3 devices a better chance to enumerate at USB3 speeds if
they are connected to a suspended host.
Porting from "671ffdff5b13 xhci: resume USB 3 roothub first"

Cc: <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Add missing CAS workaround for Intel Sunrise Point xHCI

commit ffe84e01bb1b38c7eb9c6b6da127a6c136d251df upstream.

The workaround for missing CAS bit is also needed for xHC on Intel
sunrisepoint PCH. For more details see:

Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: fix resize crash if user doesn't reload cache table

commit 5d07384a666d4b2f781dc056bfeec2c27fbdf383 upstream.

A reload of the cache's DM table is needed during resize because
otherwise a crash will occur when attempting to access smq policy
entries associated with the portion of the cache that was recently
extended.

The reason is cache-size based data structures in the policy will not be
resized, the only way to safely extend the cache is to allow for a
proper cache policy initialization that occurs when the cache table is
loaded. For example the smq policy's space_init(), init_allocator(),
calc_hotspot_params() must be sized based on the extended cache size.

The fix for this is to disallow cache resizes of this pattern:
1) suspend "cache" target's device
2) resize the fast device used for the cache
3) resume "cache" target's device

Instead, the last step must be a full reload of the cache's DM table.

Fixes: 66a636356 ("dm cache: add stochastic-multi-queue (smq) policy")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache metadata: ignore hints array being too small during resize

commit 4561ffca88c546f96367f94b8f1e4715a9c62314 upstream.

Commit fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to
on-disk superblock") enabled previously written policy hints to be
used after a cache is reactivated. But in doing so the cache
metadata's hint array was left exposed to out of bounds access because
on resize the metadata's on-disk hint array wasn't ever extended.

Fix this by ignoring that there are no on-disk hints associated with the
newly added cache blocks. An expanded on-disk hint array is later
rewritten upon the next clean shutdown of the cache.

Fixes: fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to on-disk superblock")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / core: Clear the direct_complete flag on errors

commit 69e445ab8b66a9f30519842ef18be555d3ee9b51 upstream.

If __device_suspend() runs asynchronously (in which case the device
passed to it is in dpm_suspended_list at that point) and it returns
early on an error or pending wakeup, and the power.direct_complete
flag has been set for the device already, the subsequent
device_resume() will be confused by that and it will call
pm_runtime_enable() incorrectly, as runtime PM has not been
disabled for the device by __device_suspend().

To avoid that, clear power.direct_complete if __device_suspend()
is not going to disable runtime PM for the device before returning.

Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily)
Reported-by: Al Cooper <alcooperx@gmail.com>
Tested-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keys

commit 211710ca74adf790b46ab3867fcce8047b573cd1 upstream.

key->sta is only valid after ieee80211_key_link, which is called later
in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is
never set when management frame protection is enabled.

Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Reprogram bridge prefetch registers on resume

commit 083874549fdfefa629dfa752785e20427dde1511 upstream.

On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3
suspend/resume.  The affected products include multiple generations of
NVIDIA GPUs and Intel SoCs.  After resume, nouveau logs many errors such
as:

  fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04
        [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown]
  DRM: failed to idle channel 0 [DRM]

Similarly, the NVIDIA proprietary driver also fails after resume (black
screen, 100% CPU usage in Xorg process).  We shipped a sample to NVIDIA for
diagnosis, and their response indicated that it's a problem with the parent
PCI bridge (on the Intel SoC), not the GPU.

Runtime suspend/resume works fine, only S3 suspend is affected.

We found a workaround: on resume, rewrite the Intel PCI bridge
'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32).  In the
cases that I checked, this register has value 0 and we just have to rewrite
that value.

Linux already saves and restores PCI config space during suspend/resume,
but this register was being skipped because upon resume, it already has
value 0 (the correct, pre-suspend value).

Intel appear to have previously acknowledged this behaviour and the
requirement to rewrite this register:
https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23

Based on that, rewrite the prefetch register values even when that appears
unnecessary.

We have confirmed this solution on all the affected models we have in-hands
(X542UQ, UX533FD, X530UN, V272UN).

Additionally, this solves an issue where r8169 MSI-X interrupts were broken
after S3 suspend/resume on ASUS X441UAR.  This issue was recently worked
around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e").  It
also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop
that we had not yet patched.  I suspect it will also fix the issue that was
worked around in commit 7c53a722459c ("r8169: don't use MSI-X on
RTL8168g").

Thomas Martitz reports that this change also solves an issue where the AMD
Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3
suspend/resume.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-By: Peter Wu <peter@lekensteyn.nl>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Fix vDSO syscall fallback asm constraint regression

commit 02e425668f5c9deb42787d10001a3b605993ad15 upstream.

When I added the missing memory outputs, I failed to update the
index of the first argument (ebx) on 32-bit builds, which broke the
fallbacks. Somehow I must have screwed up my testing or gotten
lucky.

Add another test to cover gettimeofday() as well.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks")
Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Only enable vDSO retpolines when enabled and supported

commit 4f166564014aba65ad6f15b612f6711fd0f117ee upstream.

When I fixed the vDSO build to use inline retpolines, I messed up
the Makefile logic and made it unconditional. It should have
depended on CONFIG_RETPOLINE and on the availability of compiler
support. This broke the build on some older compilers.

Reported-by: nikola.ciprich@linuxbox.cz
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Rickard <matt@softrans.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jason.vas.dias@gmail.com
Cc: stable@vger.kernel.org
Fixes: 2e549b2ee0e3 ("x86/vdso: Fix vDSO build if a retpoline is emitted")
Link: http://lkml.kernel.org/r/08a1f29f2c238dd1f493945e702a521f8a5aa3ae.1538540801.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Add clock_gettime() tests to test_vdso

commit 7c03e7035ac1cf2a6165754e4f3a49c2f1977838 upstream.

Now that the vDSO implementation of clock_gettime() is getting
reworked, add a selftest for it. This tests that its output is
consistent with the syscall version.

This is marked for stable to serve as a test for commit

715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks")

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/082399674de2619b2befd8c0dde49b260605b126.1538422295.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Fix asm constraints on vDSO syscall fallbacks

commit 715bd9d12f84d8f5cc8ad21d888f9bc304a8eb0b upstream.

The syscall fallbacks in the vDSO have incorrect asm constraints.
They are not marked as writing to their outputs -- instead, they are
marked as clobbering "memory", which is useless.  In particular, gcc
is smart enough to know that the timespec parameter hasn't escaped,
so a memory clobber doesn't clobber it.  And passing a pointer as an
asm *input* does not tell gcc that the pointed-to value is changed.

Add in the fact that the asm instructions weren't volatile, and gcc
was free to omit them entirely unless their sole output (the return
value) is used.  Which it is (phew!), but that stops happening with
some upcoming patches.

As a trivial example, the following code:

void test_fallback(struct timespec *ts)
{
vdso_fallback_gettime(CLOCK_MONOTONIC, ts);
}

compiles to:

00000000000000c0 <test_fallback>:
  c0:   c3                      retq

To add insult to injury, the RCX and R11 clobbers on 64-bit
builds were missing.

The "memory" clobber is also unnecessary -- no ordering with respect to
other memory operations is needed, but that's going to be fixed in a
separate not-for-stable patch.

Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/2c0231690551989d2fafa60ed0e7b5cc8b403908.1538422295.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set

commit 337fe9f5c1e7de1f391c6a692531379d2aa2ee11 upstream.

We attempt to get fences earlier in the hopes that everything will
already have fences and no callbacks will be needed. If we do succeed
in getting a fence, getting one a second time will result in a duplicate
ref with no unref. This is causing memory leaks in Vulkan applications
that create a lot of fences; playing for a few hours can, apparently,
bring down the system.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107899
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926071703.15257-1-jason.ekstrand@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix vce work queue was not cancelled when suspend

commit 61ea6f5831974ebd1a57baffd7cc30600a2e26fc upstream.

The vce cancel_delayed_work_sync never be called.
driver call the function in error path.

This caused the A+A suspend hang when runtime pm enebled.
As we will visit the smu in the idle queue. this will cause
smu hang because the dgpu has been suspend, and the dgpu also
will be waked up. As the smu has been hang, so the dgpu resume
will failed.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: fix input validation in xenvif_set_hash_mapping()

commit 780e83c259fc33e8959fed8dfdad17e378d72b62 upstream.

Both len and off are frontend specified values, so we need to make
sure there's no overflow when adding the two for the bounds check. We
also want to avoid undefined behavior and hence use off to index into
->hash.mapping[] only after bounds checking. This at the same time
allows to take care of not applying off twice for the bounds checking
against vif->num_queues.

It is also insufficient to bounds check copy_op.len, as this is len
truncated to 16 bits.

This is XSA-270 / CVE-2018-15471.

Reported-by: Felix Wilhelm <fwilhelm@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Cc: stable@vger.kernel.org [4.7 onwards]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev/omapfb: fix omapfb_memory_read infoleak

commit 1bafcbf59fed92af58955024452f45430d3898c5 upstream.

OMAPFB_MEMORY_READ ioctl reads pixels from the LCD's memory and copies
them to a userspace buffer. The code has two issues:

- The user provided width and height could be large enough to overflow
the calculations
- The copy_to_user() can copy uninitialized memory to the userspace,
which might contain sensitive kernel information.

Fix these by limiting the width & height parameters, and only copying
the amount of data that we actually received from the LCD.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/drivers/timer-atmel-pit: Properly handle error cases

commit 52bf4a900d9cede3eb14982d0f2c5e6db6d97cc3 upstream.

The smatch utility reports a possible leak:

smatch warnings:
drivers/clocksource/timer-atmel-pit.c:183 at91sam926x_pit_dt_init() warn: possible memory leak of 'data'

Ensure data is freed before exiting with an error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: I/O and timer unplugs are inverted in blktrace

commit 587562d0c7cd6861f4f90a2eb811cccb1a376f5f upstream.

trace_block_unplug() takes true for explicit unplugs and false for
implicit unplugs. schedule() unplugs are implicit and should be
reported as timer unplugs. While correct in the legacy code, this has
been inverted in blk-mq since 4.11.

Cc: stable@vger.kernel.org
Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix L1TF's MMIO GFN calculation

commit daa07cbc9ae3da2d61b7ce900c0b9107d134f2c1 upstream.

One defense against L1TF in KVM is to always set the upper five bits
of the *legal* physical address in the SPTEs for non-present and
reserved SPTEs, e.g. MMIO SPTEs.  In the MMIO case, the GFN of the
MMIO SPTE may overlap with the upper five bits that are being usurped
to defend against L1TF.  To preserve the GFN, the bits of the GFN that
overlap with the repurposed bits are shifted left into the reserved
bits, i.e. the GFN in the SPTE will be split into high and low parts.
When retrieving the GFN from the MMIO SPTE, e.g. to check for an MMIO
access, get_mmio_spte_gfn() unshifts the affected bits and restores
the original GFN for comparison.  Unfortunately, get_mmio_spte_gfn()
neglects to mask off the reserved bits in the SPTE that were used to
store the upper chunk of the GFN.  As a result, KVM fails to detect
MMIO accesses whose GPA overlaps the repurprosed bits, which in turn
causes guest panics and hangs.

Fix the bug by generating a mask that covers the lower chunk of the
GFN, i.e. the bits that aren't shifted by the L1TF mitigation.  The
alternative approach would be to explicitly zero the five reserved
bits that are used to store the upper chunk of the GFN, but that
requires additional run-time computation and makes an already-ugly
bit of code even more inscrutable.

I considered adding a WARN_ON_ONCE(low_phys_bits-1 <= PAGE_SHIFT) to
warn if GENMASK_ULL() generated a nonsensical value, but that seemed
silly since that would mean a system that supports VMX has less than
18 bits of physical address space...

Reported-by: Sakari Ailus <sakari.ailus@iki.fi>
Fixes: d9b47449c1a1 ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs")
Cc: Junaid Shahid <junaids@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Junaid Shahid <junaids@google.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly

commit 58bc4c34d249bf1bc50730a9a209139347cfacfe upstream.

5dd0b16cdaff ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even
on UP") made the availability of the NR_TLB_REMOTE_FLUSH* counters inside
the kernel unconditional to reduce #ifdef soup, but (either to avoid
showing dummy zero counters to userspace, or because that code was missed)
didn't update the vmstat_array, meaning that all following counters would
be shown with incorrect values.

This only affects kernel builds with
CONFIG_VM_EVENT_COUNTERS=y && CONFIG_DEBUG_TLBFLUSH=y && CONFIG_SMP=n.

Link: http://lkml.kernel.org/r/20181001143138.95119-2-jannh@google.com
Fixes: 5dd0b16cdaff ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, thp: fix mlocking THP page with migration enabled

commit e125fe405abedc1dc8a5b2229b80ee91c1434015 upstream.

A transparent huge page is represented by a single entry on an LRU list.
Therefore, we can only make unevictable an entire compound page, not
individual subpages.

If a user tries to mlock() part of a huge page, we want the rest of the
page to be reclaimable.

We handle this by keeping PTE-mapped huge pages on normal LRU lists: the
PMD on border of VM_LOCKED VMA will be split into PTE table.

Introduction of THP migration breaks[1] the rules around mlocking THP
pages.  If we had a single PMD mapping of the page in mlocked VMA, the
page will get mlocked, regardless of PTE mappings of the page.

For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in
remove_migration_pmd().

Anon THP pages can only be shared between processes via fork().  Mlocked
page can only be shared if parent mlocked it before forking, otherwise CoW
will be triggered on mlock().

For Anon-THP, we can fix the issue by munlocking the page on removing PTE
migration entry for the page.  PTEs for the page will always come after
mlocked PMD: rmap walks VMAs from oldest to newest.

Test-case:

#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/mempolicy.h>
#include <numaif.h>

int main(void)
{
        unsigned long nodemask = 4;
        void *addr;

addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0);

        if (fork()) {
wait(NULL);
return 0;
        }

        mlock(addr, 4UL << 10);
        mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES,
                &nodemask, 4, MPOL_MF_MOVE);

        return 0;
}

[1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com

Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com
Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: migration: fix migration of huge PMD shared pages

commit 017b1660df89f5fb4bfe66c34e35f7d2031100c7 upstream.

The page migration code employs try_to_unmap() to try and unmap the source
page.  This is accomplished by using rmap_walk to find all vmas where the
page is mapped.  This search stops when page mapcount is zero.  For shared
PMD huge pages, the page map count is always 1 no matter the number of
mappings.  Shared mappings are tracked via the reference count of the PMD
page.  Therefore, try_to_unmap stops prematurely and does not completely
unmap all mappings of the source page.

This problem can result is data corruption as writes to the original
source page can happen after contents of the page are copied to the target
page.  Hence, data is lost.

This problem was originally seen as DB corruption of shared global areas
after a huge page was soft offlined due to ECC memory errors.  DB
developers noticed they could reproduce the issue by (hotplug) offlining
memory used to back huge pages.  A simple testcase can reproduce the
problem by creating a shared PMD mapping (note that this must be at least
PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using
migrate_pages() to migrate process pages between nodes while continually
writing to the huge pages being migrated.

To fix, have the try_to_unmap_one routine check for huge PMD sharing by
calling huge_pmd_unshare for hugetlbfs huge pages.  If it is a shared
mapping it will be 'unshared' which removes the page table entry and drops
the reference on the PMD page.  After this, flush caches and TLB.

mmu notifiers are called before locking page tables, but we can not be
sure of PMD sharing until page tables are locked.  Therefore, check for
the possibility of PMD sharing before locking so that notifiers can
prepare for the worst possible case.

Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com
[mike.kravetz@oracle.com: make _range_in_vma() a static inline]
Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com
Fixes: 39dde65c9940 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Add sanity check to deal with pinned event failure

commit befb1b3c2703897c5b8ffb0044dc5d0e5f27c5d7 upstream.

It is possible that a failure can occur during the scheduling of a
pinned event. The initial portion of perf_event_read_local() contains
the various error checks an event should pass before it can be
considered valid. Ensure that the potential scheduling failure
of a pinned event is checked for and have a credible error.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: acme@kernel.org
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/6486385d1f30336e9973b24c8c65f5079543d3d3.1537377064.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.75

dm thin metadata: fix __udivdi3 undefined on 32-bit

commit 013ad043906b2befd4a9bfb06219ed9fedd92716 upstream.

sector_div() is only viable for use with sector_t.
dm_block_t is typedef'd to uint64_t -- so use div_u64() instead.

Fixes: 3ab918281 ("dm thin metadata: try to avoid ever aborting transactions")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: check return value of napi_complete_done()

commit 4233cfe6ec4683497d7318f55ce7617e97f2e610 upstream.

The NIC driver should only enable interrupts when napi_complete_done()
returns true. This patch adds the check for ixgbe.

Cc: stable@vger.kernel.org # 4.10+
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix locking for res->tracking and dlm->tracking_list

commit cbe355f57c8074bc4f452e5b6e35509044c6fa23 upstream.

In dlm_init_lockres() we access and modify res->tracking and
dlm->tracking_list without holding dlm->track_lock. This can cause list
corruptions and can end up in kernel panic.

Fix this by locking res->tracking and dlm->tracking_list with
dlm->track_lock instead of dlm->spinlock.

Link: http://lkml.kernel.org/r/1529951192-4686-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: restrict kernel stack dumps to root

commit f8a00cef17206ecd1b30d3d9f99e10d9fa707aa7 upstream.

Currently, you can use /proc/self/task/*/stack to cause a stack walk on
a task you control while it is running on another CPU.  That means that
the stack can change under the stack walker.  The stack walker does
have guards against going completely off the rails and into random
kernel memory, but it can interpret random data from your kernel stack
as instruction pointers and stack pointers.  This can cause exposure of
kernel stack contents to userspace.

Restrict the ability to inspect kernel stacks of arbitrary tasks to root
in order to prevent a local attacker from exploiting racy stack unwinding
to leak kernel task stack contents.  See the added comment for a longer
rationale.

There don't seem to be any users of this userspace API that can't
gracefully bail out if reading from the file fails.  Therefore, I believe
that this change is unlikely to break things.  In the case that this patch
does end up needing a revert, the next-best solution might be to fake a
single-entry stack based on wchan.

Link: http://lkml.kernel.org/r/20180927153316.200286-1-jannh@google.com
Fixes: 2ec220e27f50 ("proc: add /proc/*/stack")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: hv: fcopy: set 'error' in case an unknown operation was requested

commit c2d68afba86d1ff01e7300c68bc16a9234dcd8e9 upstream.

'error' variable is left uninitialized in case we see an unknown operation.
As we don't immediately return and proceed to pwrite() we need to set it
to something, HV_E_FAIL sounds good enough.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()

commit 41e270f6898e7502be9fd6920ee0a108ca259d36 upstream.

With CONFIG_DEBUG_PREEMPT=y, I always see this warning:
BUG: using smp_processor_id() in preemptible [00000000]

Fix the false warning by using get/put_cpu().

Here vmbus_connect() sends a message to the host and waits for the
host's response. The host will deliver the response message and an
interrupt on CPU msg->target_vcpu, and later the interrupt handler
will wake up vmbus_connect(). vmbus_connect() doesn't really have
to run on the same cpu as CPU msg->target_vcpu, so it's safe to
call put_cpu() just here.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: Free the last requested descriptor

commit 19a4fbffc94e41abaa2a623a25ce2641d69eccf0 upstream.

The current code only frees N-1 gpios if an error occurs during
gpiod_set_transitory, gpiod_direction_output or gpiod_direction_input.
Leading to gpios that cannot be used by userspace nor other drivers.

Cc: Timur Tabi <timur@codeaurora.org>
Cc: stable@vger.kernel.org
Fixes: ab3dbcf78f60f46d ("gpioib: do not free unrequested descriptors)
Reported-by: Jan Lorenzen <jl@newtec.dk>
Reported-by: Jim Paris <jim@jtan.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam/jr - fix ablkcipher_edesc pointer arithmetic

commit 13cc6f48c7434ce46ba6dbc90003a136a263d75a upstream.

In some cases the zero-length hw_desc array at the end of
ablkcipher_edesc struct requires for 4B of tail padding.

Due to tail padding and the way pointers to S/G table and IV
are computed:
edesc->sec4_sg = (void *)edesc + sizeof(struct ablkcipher_edesc) +
desc_bytes;
iv = (u8 *)edesc->hw_desc + desc_bytes + sec4_sg_bytes;
first 4 bytes of IV are overwritten by S/G table.

Update computation of pointer to S/G table to rely on offset of hw_desc
member and not on sizeof() operator.

Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 115957bb3e59 ("crypto: caam - fix IV DMA mapping and updating")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: mxs-dcp - Fix wait logic on chan threads

commit d80771c08363ad7fbf0f56f5301e7ca65065c582 upstream.

When compiling with CONFIG_DEBUG_ATOMIC_SLEEP=y the mxs-dcp driver
prints warnings such as:

WARNING: CPU: 0 PID: 120 at kernel/sched/core.c:7736 __might_sleep+0x98/0x9c
do not call blocking ops when !TASK_RUNNING; state=1 set at [<8081978c>] dcp_chan_thread_sha+0x3c/0x2ec

The problem is that blocking ops will manipulate current->state
themselves so it is not allowed to call them between
set_current_state(TASK_INTERRUPTIBLE) and schedule().

Fix this by converting the per-chan mutex to a spinlock (it only
protects tiny list ops anyway) and rearranging the wait logic so that
callbacks are called current->state as TASK_RUNNING. Those callbacks
will indeed call blocking ops themselves so this is required.

Cc: <stable@vger.kernel.org>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe()

commit ba439a6cbfa2936a6713f64cb499de7943673fe3 upstream.

The following KASAN warning was printed when booting a 64-bit kernel
on some systems with Intel CPUs:

[   44.512826] ==================================================================
[   44.520165] BUG: KASAN: stack-out-of-bounds in find_first_bit+0xb0/0xc0
[   44.526786] Read of size 8 at addr ffff88041e02fc50 by task kworker/0:2/124

[   44.535253] CPU: 0 PID: 124 Comm: kworker/0:2 Tainted: G               X --------- ---  4.18.0-12.el8.x86_64+debug #1
[   44.545858] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS BKVDTRL1.86B.0005.D08.1712070559 12/07/2017
[   44.555682] Workqueue: events work_for_cpu_fn
[   44.560043] Call Trace:
[   44.562502]  dump_stack+0x9a/0xe9
[   44.565832]  print_address_description+0x65/0x22e
[   44.570683]  ? find_first_bit+0xb0/0xc0
[   44.570689]  kasan_report.cold.6+0x92/0x19f
[   44.578726]  find_first_bit+0xb0/0xc0
[   44.578737]  adf_probe+0x9eb/0x19a0 [qat_c62x]
[   44.578751]  ? adf_remove+0x110/0x110 [qat_c62x]
[   44.591490]  ? mark_held_locks+0xc8/0x140
[   44.591498]  ? _raw_spin_unlock+0x30/0x30
[   44.591505]  ? trace_hardirqs_on_caller+0x381/0x570
[   44.604418]  ? adf_remove+0x110/0x110 [qat_c62x]
[   44.604427]  local_pci_probe+0xd4/0x180
[   44.604432]  ? pci_device_shutdown+0x110/0x110
[   44.617386]  work_for_cpu_fn+0x51/0xa0
[   44.621145]  process_one_work+0x8fe/0x16e0
[   44.625263]  ? pwq_dec_nr_in_flight+0x2d0/0x2d0
[   44.629799]  ? lock_acquire+0x14c/0x400
[   44.633645]  ? move_linked_works+0x12e/0x2a0
[   44.637928]  worker_thread+0x536/0xb50
[   44.641690]  ? __kthread_parkme+0xb6/0x180
[   44.645796]  ? process_one_work+0x16e0/0x16e0
[   44.650160]  kthread+0x30c/0x3d0
[   44.653400]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[   44.658457]  ret_from_fork+0x3a/0x50

[   44.663557] The buggy address belongs to the page:
[   44.668350] page:ffffea0010780bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[   44.676356] flags: 0x17ffffc0000000()
[   44.680023] raw: 0017ffffc0000000 ffffea0010780bc8 ffffea0010780bc8 0000000000000000
[   44.687769] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[   44.695510] page dumped because: kasan: bad access detected

[   44.702578] Memory state around the buggy address:
[   44.707372]  ffff88041e02fb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   44.714593]  ffff88041e02fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   44.721810] >ffff88041e02fc00: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 f2 f2
[   44.729028]                                                  ^
[   44.734864]  ffff88041e02fc80: f2 f2 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00
[   44.742082]  ffff88041e02fd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   44.749299] ==================================================================

Looking into the code:

  int ret, bar_mask;
    :
  for_each_set_bit(bar_nr, (const unsigned long *)&bar_mask,

It is casting a 32-bit integer pointer to a 64-bit unsigned long
pointer. There are two problems here. First, the 32-bit pointer address
may not be 64-bit aligned. Secondly, it is accessing an extra 4 bytes.

This is fixed by changing the bar_mask type to unsigned long.

Cc: <stable@vger.kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760

commit 709ae62e8e6d9ac4df7dadb3b8ae432675c45ef9 upstream.

The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't
adjust speaker's volume on a Dell AIO"), the output requires to connect
to a node with Amp-out capability.

Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue.

BugLink: https://bugs.launchpad.net/bugs/1775068
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Clear memory encryption mask from physical address

commit b3e9b515b08e407ab3a026dc2e4d935c48d05f69 upstream.

Boris Ostrovsky reported a memory leak with device passthrough when SME
is active.

The VFIO driver uses iommu_iova_to_phys() to get the physical address for
an iova. This physical address is later passed into vfio_unmap_unpin() to
unpin the memory. The vfio_unmap_unpin() uses pfn_valid() before unpinning
the memory. The pfn_valid() check was failing because encryption mask was
part of the physical address returned. This resulted in the memory not
being unpinned and therefore leaked after the guest terminates.

The memory encryption mask must be cleared from the physical address in
iommu_iova_to_phys().

Fixes: 2543a786aa25 ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb2: fix missing files in root share directory listing

commit 0595751f267994c3c7027377058e4185b3a28e75 upstream.

When mounting a Windows share that is the root of a drive (eg. C$)
the server does not return . and .. directory entries. This results in
the smb2 code path erroneously skipping the 2 first entries.

Pseudo-code of the readdir() code path:

cifs_readdir(struct file, struct dir_context)
    initiate_cifs_search            <-- if no reponse cached yet
        server->ops->query_dir_first

    dir_emit_dots
        dir_emit                    <-- adds "." and ".." if we're at pos=0

    find_cifs_entry
        initiate_cifs_search        <-- if pos < start of current response
                                         (restart search)
        server->ops->query_dir_next <-- if pos > end of current response
                                         (fetch next search res)

    for(...)                        <-- loops over cur response entries
                                          starting at pos
        cifs_filldir                <-- skip . and .., emit entry
            cifs_fill_dirent
            dir_emit
pos++

A) dir_emit_dots() always adds . & ..
   and sets the current dir pos to 2 (0 and 1 are done).

Therefore we always want the index_to_find to be 2 regardless of if
the response has . and ..

B) smb1 code initializes index_of_last_entry with a +2 offset

  in cifssmb.c CIFSFindFirst():
psrch_inf->index_of_last_entry = 2 /* skip . and .. */ +
psrch_inf->entries_in_buffer;

Later in find_cifs_entry() we want to find the next dir entry at pos=2
as a result of (A)

first_entry_in_buffer = cfile->srch_inf.index_of_last_entry -
cfile->srch_inf.entries_in_buffer;

This var is the dir pos that the first entry in the buffer will
have therefore it must be 2 in the first call.

If we don't offset index_of_last_entry by 2 (like in (B)),
first_entry_in_buffer=0 but we were instructed to get pos=2 so this
code in find_cifs_entry() skips the 2 first which is ok for non-root
shares, as it skips . and .. from the response but is not ok for root
shares where the 2 first are actual files

pos_in_buf = index_to_find - first_entry_in_buffer;
                // pos_in_buf=2
// we skip 2 first response entries :(
for (i = 0; (i < (pos_in_buf)) && (cur_ent != NULL); i++) {
/* go entry by entry figuring out which is first */
cur_ent = nxt_dir_entry(cur_ent, end_of_smb,
cfile->srch_inf.info_level);
}

C) cifs_filldir() skips . and .. so we can safely ignore them for now.

Sample program:

int main(int argc, char **argv)
{
const char *path = argc >= 2 ? argv[1] : ".";
DIR *dh;
struct dirent *de;

printf("listing path <%s>\n", path);
dh = opendir(path);
if (!dh) {
printf("opendir error %d\n", errno);
return 1;
}

while (1) {
de = readdir(dh);
if (!de) {
if (errno) {
printf("readdir error %d\n", errno);
return 1;
}
printf("end of listing\n");
break;
}
printf("off=%lu <%s>\n", de->d_off, de->d_name);
}

return 0;
}

Before the fix with SMB1 on root shares:

<.>            off=1
<..>           off=2
<$Recycle.Bin> off=3
<bootmgr>      off=4

and on non-root shares:

<.>    off=1
<..>   off=4  <-- after adding .., the offsets jumps to +2 because
<2536> off=5       we skipped . and .. from response buffer (C)
<411>  off=6       but still incremented pos
<file> off=7
<fsx>  off=8

Therefore the fix for smb2 is to mimic smb1 behaviour and offset the
index_of_last_entry by 2.

Test results comparing smb1 and smb2 before/after the fix on root
share, non-root shares and on large directories (ie. multi-response
dir listing):

PRE FIX
=======
pre-1-root VS pre-2-root:
        ERR pre-2-root is missing [bootmgr, $Recycle.Bin]
pre-1-nonroot VS pre-2-nonroot:
        OK~ same files, same order, different offsets
pre-1-nonroot-large VS pre-2-nonroot-large:
        OK~ same files, same order, different offsets

POST FIX
========
post-1-root VS post-2-root:
        OK same files, same order, same offsets
post-1-nonroot VS post-2-nonroot:
        OK same files, same order, same offsets
post-1-nonroot-large VS post-2-nonroot-large:
        OK same files, same order, same offsets

REGRESSION?
===========
pre-1-root VS post-1-root:
        OK same files, same order, same offsets
pre-1-nonroot VS post-1-nonroot:
        OK same files, same order, same offsets

BugLink: https://bugzilla.samba.org/show_bug.cgi?id=13107
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara <palcantara@suse.deR>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs: Do not return POSIX ACL xattrs via listxattr

commit ffc4c92227db5699493e43eb140b4cb5904c30ff upstream.

Commit 786534b92f3c introduced a regression that caused listxattr to
return the POSIX ACL attribute names even though sysfs doesn't support
POSIX ACLs.  This happens because simple_xattr_list checks for NULL
i_acl / i_default_acl, but inode_init_always initializes those fields
to ACL_NOT_CACHED ((void *)-1).  For example:
    $ getfattr -m- -d /sys
    /sys: system.posix_acl_access: Operation not supported
    /sys: system.posix_acl_default: Operation not supported
Fix this in simple_xattr_list by checking if the filesystem supports POSIX ACLs.

Fixes: 786534b92f3c ("tmpfs: listxattr should include POSIX ACL xattrs")
Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Tested-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix format of setxattr debug

commit 1a8f8d2a443ef9ad9a3065ba8c8119df714240fa upstream.

Format has a typo: it was meant to be "%.*s", not "%*s". But at some point
callers grew nonprintable values as well, so use "%*pE" instead with a
maximized length.

Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix memory leak on unlink of indexed file

commit 63e132528032ce937126aba591a7b37ec593a6bb upstream.

The memory leak was detected by kmemleak when running xfstests
overlay/051,053

Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix access beyond unterminated strings

commit 601350ff58d5415a001769532f6b8333820e5786 upstream.

KASAN detected slab-out-of-bounds access in printk from overlayfs,
because string format used %*s instead of %.*s.

> BUG: KASAN: slab-out-of-bounds in string+0x298/0x2d0 lib/vsprintf.c:604
> Read of size 1 at addr ffff8801c36c66ba by task syz-executor2/27811
>
> CPU: 0 PID: 27811 Comm: syz-executor2 Not tainted 4.19.0-rc5+ #36
...
> printk+0xa7/0xcf kernel/printk/printk.c:1996
> ovl_lookup_index.cold.15+0xe8/0x1f8 fs/overlayfs/namei.c:689

Reported-by: syzbot+376cea2b0ef340db3dd4@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 359f392ca53e ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage

[ Upstream commit 4dca864b59dd150a221730775e2f21f49779c135 ]

This patch removes duplicate macro useage in events_base.c.

It also fixes gcc warning:
variable ‘col’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: avoid crash in disable_hotplug_cpu

[ Upstream commit 3366cdb6d350d95466ee430ac50f3c8415ca8f46 ]

The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0:

BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010
RIP: e030:device_offline+0x9/0xb0
Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6
RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000
R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30
R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0
FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660
Call Trace:
handle_vcpu_hotplug_event+0xb5/0xc0
xenwatch_thread+0x80/0x140
? wait_woken+0x80/0x80
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x3a/0x50

This happens because handle_vcpu_hotplug_event is called twice. In the
first iteration cpu_present is still true, in the second iteration
cpu_present is false which causes get_cpu_device to return NULL.
In case of cpu#0, cpu_online is apparently always true.

Fix this crash by checking if the cpu can be hotplugged, which is false
for a cpu that was just removed.

Also check if the cpu was actually offlined by device_remove, otherwise
leave the cpu_present state as it is.

Rearrange to code to do all work with device_hotplug_lock held.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/manage: don't complain about an empty value in control/sysrq node

[ Upstream commit 87dffe86d406bee8782cac2db035acb9a28620a7 ]

When guest receives a sysrq request from the host it acknowledges it by
writing '\0' to control/sysrq xenstore node. This, however, make xenstore
watch fire again but xenbus_scanf() fails to parse empty value with "%c"
format string:

sysrq: SysRq : Emergency Sync
Emergency Sync complete
xen:manage: Error -34 reading sysrq code in control/sysrq

Ignore -ERANGE the same way we already ignore -ENOENT, empty value in
control/sysrq is totally legal.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: read overflow in is_valid_oplock_break()

[ Upstream commit 097f5863b1a0c9901f180bbd56ae7d630655faaa ]

We need to verify that the "data_offset" is within bounds.

Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: don't dump past end of unknown HW header

[ Upstream commit 0ac1487c4b2de383b91ecad1be561b8f7a2c15f4 ]

For inbound data with an unsupported HW header format, only dump the
actual HW header. We have no idea how much payload follows it, and what
it contains. Worst case, we dump past the end of the Inbound Buffer and
access whatever is located next in memory.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: use vzalloc for QUERY OAT buffer

[ Upstream commit aec45e857c5538664edb76a60dd452e3265f37d1 ]

qeth_query_oat_command() currently allocates the kernel buffer for
the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with
fragmented memory, large allocations may fail (eg. the qethqoat tool by
default uses 132KB).

Solve this issue by using vzalloc, backing the allocation with
non-contiguous memory.

Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED

[ Upstream commit 6ad569019999300afd8e614d296fdc356550b77f ]

After system suspend, sometimes the r8169 doesn't work when ethernet
cable gets pluggued.

This issue happens because rtl_reset_work() doesn't get called from
rtl8169_runtime_resume(), after system suspend.

In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is
met:
if (!netif_running(dev) ||
!test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags))
...

If RTL_FLAG_TASK_ENABLED was cleared during system suspend while
RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't
schedule task as the flag is still there.

So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other
flags.

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk

[ Upstream commit 0165de983272d1fae0809ed9db47c46a412279bc ]

Slowly leaking memory one page at a time :)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>