drm: add helper functions to retrieve old and new crtc

Add new helper functions, drm_atomic_get_old_crtc_for_encoder
and drm_atomic_get_new_crtc_for_encoder to retrieve the
corresponding crtc for the encoder.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524718/
Link: https://lore.kernel.org/r/1677774797-31063-2-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

PM / devfreq: Fix build issues with devfreq disabled

The existing no-op shims for when PM_DEVFREQ (or an individual governor)
only do half the job.  The governor specific config/tuning structs need
to be available to avoid compile errors in drivers using devfreq.

Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Patchwork: https://patchwork.freedesktop.org/patch/519801/
Link: https://lore.kernel.org/r/20230123153745.3185032-1-robdclark@gmail.com

drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()

The function dpu_plane_sspp_atomic_update() updates pdpu->is_rt_pipe
flag, but after the commit 854f6f1c653b ("drm/msm/dpu: update the qos
remap only if the client type changes") it sets the flag late, after all
the qos functions have updated QoS programming. Move the flag update
back to the place where it happened before the mentioned commit to let
the pipe be programmed according to its current RT/non-RT state.

Fixes: 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516239/
Link: https://lore.kernel.org/r/20221229191856.3508092-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: correct the UBWC version on sm6115

According to downstream (bengal-sde.dtsi), the sm6115 uses UBWC 1.0.
Change the catalog entry accordingly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514337/
Link: https://lore.kernel.org/r/20221207142833.204193-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: handle UBWC 1.0 in dpu_hw_sspp_setup_format

Extend dpu_hw_sspp_setup_format() to also handle the UBWC 1.0 case.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514336/
Link: https://lore.kernel.org/r/20221207142833.204193-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: make hdmi_phy_8960 OF clk provider

On MSM8960 the HDMI PHY provides the PLL clock to the MMCC. As we are
preparing to convert the MSM8960 to use DT clocks properties (rather
than global clock names), register the OF clock provider.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519211/
Link: https://lore.kernel.org/r/20230119132219.2479775-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: switch hdmi_pll_8960 to use parent_data

Replace parent_names usage with parent_data. Note, that this makes the
PLL default to board's `pxo_board' clock rather than just `pxo' clock,
as we are on a way to deprecate the global cxo/pxo clocks.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519210/
Link: https://lore.kernel.org/r/20230119132219.2479775-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: phy: qcom, hdmi-phy-other: mark it as clock provider

Eventually all HDMI PHYs are going to provide the HDMI PLL clock to the
MMCC. Add #clock-cells property required to provide the HDMI PLL clock to
other devices.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/519213/
Link: https://lore.kernel.org/r/20230119132219.2479775-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: phy: qcom, hdmi-phy-other: use pxo clock

Add pxo clock to the 8960 bindings (used by the HDMI PLL)

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519206/
Link: https://lore.kernel.org/r/20230119132219.2479775-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: properly handle the case of empty OPP table in dsi_mgr_bridge_mode_valid

It was left unnoticed during the review that even if there is no OPP
table in device tree, one will be created by a call to the function
devm_pm_opp_set_clkname(). This leads to dsi_mgr_bridge_mode_valid()
rejecting all modes if DT contains no OPP table for the DSI host.

Rework dsi_mgr_bridge_mode_valid() to handle this case by actually
checking that the table is populated with frequency entries before
returning an error.

Fixes: 8328041b8c82 ("drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520076/
Link: https://lore.kernel.org/r/20230124203600.3488766-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add DSC hardware blocks to register snapshot

Add missing DSC hardware block register ranges to the snapshot utility
to include them in dmesg (on MSM_DISP_SNAPSHOT_DUMP_IN_CONSOLE) and the
kms debugfs file.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520175/
Link: https://lore.kernel.org/r/20230125101412.216924-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: Add check for kzalloc

As kzalloc may fail and return NULL pointer,
it should be better to check the return value
in order to avoid the NULL pointer dereference.

Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514154/
Link: https://lore.kernel.org/r/20221206074819.18134-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add check for pstates

As kzalloc may fail and return NULL pointer,
it should be better to check pstates
in order to avoid the NULL pointer dereference.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514160/
Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add check for cstate

As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.

Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514163/
Link: https://lore.kernel.org/r/20221206080517.43786-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: fix sm8450 CTL configuration

Correct the CTL size on sm8450 platform. This fixes the incorrect merge
of sm8350 support, which unfortunately also touched the SM8450 setup.

Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/519671/
Link: https://lore.kernel.org/r/20230123080818.3069266-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add missing ubwc_swizzle setting to catalog

Use the values from the vendor DTs to set ubwc_swizzle in the catalog.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/519662/
Link: https://lore.kernel.org/r/20230123062415.3027743-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop stale comment from struct dpu_mdp_cfg doc

The field ubwc_static was removed from struct dpu_mdp_cfg some time ago.
Drop the corresponding kerneldoc now.

Fixes: 544d8b96150d ("drm/msm/dpu: update UBWC config for sm8150 and sm8250")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/519554/
Link: https://lore.kernel.org/r/20230121135457.2788199-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: use strscpy instead of strncpy

Using strncpy can result in non-NULL-terminated destination string. Use
strscpy instead. This fixes following warning:

drivers/gpu/drm/msm/msm_fence.c: In function ‘msm_fence_context_alloc’:
drivers/gpu/drm/msm/msm_fence.c:25:9: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   25 |         strncpy(fctx->name, name, sizeof(fctx->name));
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: f97decac5f4c ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518787/
Link: https://lore.kernel.org/r/20230118020152.1689213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: sc7180: add missing WB2 clock control

Add missing DPU_CLK_CTRL_WB2 to sc7180_mdp clocks array.

Fixes: 51e4d60e6ba5 ("drm/msm/dpu: add writeback support for sc7180")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/518504/
Link: https://lore.kernel.org/r/20230116103055.780767-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-binbings: display/msm: dsi-controller-main: add missing supplies

Describe DSI supplies used on apq8064 (vdda-supply) and msm8994/96
(vcca-supply).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518810/
Link: https://lore.kernel.org/r/20230118032432.1716616-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: dsi-controller-main: allow using fewer lanes

Some platforms might use less than full 4 lanes DSI interface. Allow
using any amount of lanes starting from 1 up to 4.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518807/
Link: https://lore.kernel.org/r/20230118032432.1716616-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: dsi-controller-main: account for apq8064

APQ8064 requires listing four clocks in the assigned-clocks /
assigned-clock-parents properties. Account for that.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518808/
Link: https://lore.kernel.org/r/20230118032432.1716616-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: dsi-controller-main: remove #address/#size-cells

Stop mentioning #address-cells/#size-cells which are defined in
display/dsi-controller.yaml. Use unevaluatedProperties instead of
additionalProperties to allow skipping properties defined in other
schema files.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518809/
Link: https://lore.kernel.org/r/20230118032432.1716616-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-controller-main: Document clocks on a per compatible basis

Each compatible has a different set of clocks which are associated with it.
Add in the list of clocks for each compatible.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519080/
Link: https://lore.kernel.org/r/20230118171621.102694-3-bryan.odonoghue@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC

Currently we do not differentiate between the various users of the
qcom,mdss-dsi-ctrl. The driver is flexible enough to operate from one
compatible string but, the hardware does have some significant differences
in the number of clocks.

To facilitate documenting the clocks add the following compatible strings

- qcom,apq8064-dsi-ctrl
- qcom,msm8916-dsi-ctrl
- qcom,msm8953-dsi-ctrl
- qcom,msm8974-dsi-ctrl
- qcom,msm8996-dsi-ctrl
- qcom,msm8998-dsi-ctrl
- qcom,sc7180-dsi-ctrl
- qcom,sc7280-dsi-ctrl
- qcom,sdm660-dsi-ctrl
- qcom,sdm845-dsi-ctrl
- qcom,sm8150-dsi-ctrl
- qcom,sm8250-dsi-ctrl
- qcom,sm8350-dsi-ctrl
- qcom,sm8450-dsi-ctrl
- qcom,sm8550-dsi-ctrl
- qcom,qcm2290-dsi-ctrl

Deprecate qcom,dsi-ctrl-6g-qcm2290 in favour of the desired format while we
do so.

Several MDSS yaml files exist which document the dsi sub-node.
For each existing SoC MDSS yaml, provide the right dsi compat string.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519078/
Link: https://lore.kernel.org/r/20230118171621.102694-2-bryan.odonoghue@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Merge branch 'msm-next-lumag' into HEAD

Merge display-related changes targeting Qualcomm DRM MSM driver.

Notable changes:

DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform

Core:
- Added bindings for SM8150 (driver support already present)

DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume

DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
  support for HBR3 rates.

DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs

MDP5:
- Schema conversion to YAML

Misc fixes as usual

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumag

DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform

Core:
- Added bindings for SM8150 (driver support already present)

DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume

DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
  support for HBR3 rates.

DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs

MDP5:
- Schema conversion to YAML

Misc fixes as usual

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Allow 2 CTRLs on v2.5.0

v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.

This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.

Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519513/
Link: https://lore.kernel.org/r/20230120210101.2146852-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: correct byte intf clock rate for 14nm DSI PHY

According to the vendor kernel, byte intf clock rate should be a half of
the byte clock only when DSI PHY version is above 2.0 (in other words,
10nm PHYs and later) and only if PHY is used in D-PHY mode. Currently
MSM DSI code handles only the second part of the clause (C-PHY vs
D-PHY), skipping DSI PHY version check, which causes issues on some of
14nm DSI PHY platforms (e.g. qcm2290).

Move divisor selection to DSI PHY code, pass selected divisor through
shared timings and set byte intf clock rate accordingly.

Cc: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6115P J606F
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519006/
Link: https://lore.kernel.org/r/20230118130027.2345719-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-controller-main: Add vdd* descriptions back in

When converting from .txt to .yaml we didn't include descriptions for the
existing regulator supplies.

- vdd
- vdda
- vddio

Add those descriptions into the yaml now as they were prior to the
conversion. In the .txt description we marked these regulators as required,
however, that requirement appears to have been in error.

Taking the example of sc7180-trogdor-wormdingler.dtsi. The avdd and avee
come from GPIO controlled external regulators, not the SoC and in this case
there's no need for vddio to power an I/O bus. Similarly the regulators for
the LCD are controlled by the panel driver not by the dsi-ctrl driver.

It would be possible to connect a different type of panel to the DSI bus
here in which case we may or may not want to make use of vdd, vdda or
vddio.

This is also the case for older chipsets like apq8064, msm8916 etc the vdd*
regulators in the dsi-ctrl block are helpers not dependencies.

Add the description of vdd, vdda and vddio back in for the existing
upstream dts where vdd, vdda or vddio are already declared but, don't
declare those regulators required - they are not SoC requirements.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518643/
Link: https://lore.kernel.org/r/20230116225217.1056258-4-bryan.odonoghue@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm/dsi: Don't require vdds-supply on 7nm PHY

On some SoCs (hello SM6375) vdds-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX/mx.lvl line,
which is voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518513/
Link: https://lore.kernel.org/r/20230116115132.348961-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Add phy configuration for SM6375

SM6375 uses a boring standard 7nm PHY. Add a configuration entry for it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518511/
Link: https://lore.kernel.org/r/20230116114059.346327-2-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add SM6375 DSI PHY

SM6375 has a single 7nm DSI PHY. Document it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518509/
Link: https://lore.kernel.org/r/20230116114059.346327-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()

Currently there is no protection against a user trying to set
an unsupported mode on DSI. Implement a check based on the opp
table whether the byte clock for the mode can be supported by
validating whether an opp table entry exists.

For devices which have not added opp table support yet, skip
this check otherwise it will break bootup on those devices.

changes in v3:
- make the comment shorter
- handle all errors except ENODEV

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/15
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518008/
Link: https://lore.kernel.org/r/20230112001600.12791-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: add a helper method to compute the dsi byte clk

Re-arrange the dsi_calc_pclk method to two helpers, one to
compute the DSI byte clk and the other to compute the pclk.

This makes the separation of the two clean and also allows
clients to compute and use the dsi byte clk separately.

changes in v2:
- move the assignments to definition lines

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518005/
Link: https://lore.kernel.org/r/20230112001600.12791-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Drop the redundant fail label

Drop the redundant fail label and change the "goto fail" into "return ret"
since they are the same.

Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517816/
Link: https://lore.kernel.org/r/20230111011006.6238-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Add missing check for alloc_ordered_workqueue

Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference.

Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/517646/
Link: https://lore.kernel.org/r/20230110021651.12770-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: add support for DSI 2.7.0

Add support for DSI 2.7.0 (block used on sm8550).

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517517/
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-7-660c3bcb127f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: add support for DSI-PHY on SM8550

SM8550 use a 4nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle
4nm variant inside the common 5+7nm driver.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517515/
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-6-660c3bcb127f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: document the SM8550 DSI PHY

Document the SM8550 DSI PHY which is very close from the 7nm
and 5nm DSI PHYs found in earlier platforms.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517509/
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-1-660c3bcb127f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-phy-28nm: Document fam-b compatible

Document omitted 28nm compatible which will be used on MSM8976 SoC.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516427/
Link: https://lore.kernel.org/r/20221231170532.77000-1-a39.skl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: add support for DSI 2.6.0

Add support for DSI 2.6.0 (block used on sm8450).

Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514237/
Link: https://lore.kernel.org/r/20221207012231.112059-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450

SM8350 and SM8450 use 5nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle 5nm
variants inside the common 5+7nm driver.

Co-developed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514230/
Link: https://lore.kernel.org/r/20221207012231.112059-7-dmitry.baryshkov@linaro.org
[DB: changed compatibles per Krzysztof's request]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Reapply CTM if modeset is needed

Add a !drm_atomic_crtc_needs_modeset() check to
_dpu_crtc_setup_cp_blocks() so that CTM is reapplied if the LM/DSPP
blocks were reallocated during modeset or after a suspend/resume.

Changes in V2:
- Fixed commit message

Changes in V3:
- Added mention of suspend/resume case back to commit message

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/23
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519151/
Link: https://lore.kernel.org/r/20230118233848.611-1-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use sm8350_regdma on SM8350 platform

Correct sm8350_dpu_cfg.dma_cfg to point to sm8350_regdma rather than
sm8250_regdma.

Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518791/
Link: https://lore.kernel.org/r/20230118020455.1689929-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: point sc8280xp_dpu_cfg to sc8280xp_regdma

SC8280XP configuration missed the reg_dma configuration. We do not use
regdma for now, but let's put the correct pointer anyway.

Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518790/
Link: https://lore.kernel.org/r/20230118020455.1689929-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: qcom, sc8280xp-mdss: add DP / eDP child nodes

Describe DP and eDP devices as subdevices to the MDSS on SC8280XP
platform.

Fixes: 45af56bf2d74 ("dt-bindings: display/msm: Add binding for SC8280XP MDSS")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518799/
Link: https://lore.kernel.org/r/20230118031718.1714861-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add qcom, sc8280xp-edp to list of eDP devices

Add qcom,sc8280xp-edp to the list of eDP devices, unblocking `aux-bus'
property and fobidding `#sound-dai-cells' property. Also since
sc8280xp-edp, overriding sc8280xp-dp, will contain 5 reg resources, drop
the reg contraint (as it will become equivalent to the top-level one,
requiring min 4 and max 5 reg entries).

Fixes: b6f8c4debc00 ("dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518797/
Link: https://lore.kernel.org/r/20230118031718.1714861-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add missing dpu_encoder kerneldoc

Describe missing dpu_encoder_phys_wb_is_master() argument and struct
dpu_encoder_virt.wide_bus_en field.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518794/
Link: https://lore.kernel.org/r/20230118020549.1690078-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: enable DPU_MDP_AUDIO_SELECT for sc8180x

According to the discussion ([1]) on the mailing list, platforms before
sm8250 (and derivatives) should program HDMI_DP_CORE_SELECT register to
route audio to the DP ports. Enable DPU_MDP_AUDIO_SELECT on sc8180x to
program correponding register.

[1] https://lore.kernel.org/all/f86504ba-835a-6e30-6c30-8bb89b1359c4@quicinc.com/

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518461/
Link: https://lore.kernel.org/r/20230115140022.489881-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: simplify blend configuration

Rewrite dpu_hw_ctl_setup_blendstage() to use static data configuration
rather than using a switch-case. This simplifies adding support for new
pipes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Patchwork: https://patchwork.freedesktop.org/patch/518485/
Link: https://lore.kernel.org/r/20230116063316.728496-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: simplify ctl_setup_blendstage calculation

Extract the common expression in the dpu_hw_ctl_setup_blendstage()
function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Patchwork: https://patchwork.freedesktop.org/patch/518483/
Link: https://lore.kernel.org/r/20230116063316.728496-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: fix blend setup for DMA4 and DMA5 layers

SM8550 uses new register to map SSPP_DMA4 and SSPP_DMA5 units to blend
stages. Add proper support for this register to allow using these two
planes for image processing.

Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Patchwork: https://patchwork.freedesktop.org/patch/518481/
Link: https://lore.kernel.org/r/20230116063316.728496-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: rename mdp nodes to display-controller

Follow the 'generic names' rule and rename mdp nodes to
display-controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518822/
Link: https://lore.kernel.org/r/20230118041243.1720520-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: rename mdss nodes to display-subsystem

Follow the 'generic names' rule and rename mdss nodes to
display-subsystem.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518821/
Link: https://lore.kernel.org/r/20230118041243.1720520-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add core clock to the mdss bindings

Add (optional) core clock to the mdss bindings to let the MDSS driver
access hardware registers before MDP driver probes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/518816/
Link: https://lore.kernel.org/r/20230118041243.1720520-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add SoC-specific compats to qcom, mdp5.yaml

Add platform-specific compatible entries to the qcom,mdp5.yaml to allow
distinguishing between various platforms.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518817/
Link: https://lore.kernel.org/r/20230118041243.1720520-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: convert MDP5 schema to YAML format

Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema:
 - MSM8996 has additional "iommu" clock, define it separately
 - Add new properties used on some of platforms:
   - interconnects, interconnect-names
   - iommus
   - power-domains
   - operating-points-v2, opp-table

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518815/
Link: https://lore.kernel.org/r/20230118041243.1720520-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: Remove INIT_SETUP delay

During initalization of the DisplayPort controller an EV_HPD_INIT_SETUP
event is generated, but with a delay of 100 units. This delay existed to
circumvent bug in the QMP combo PHY driver, where if the DP part was
powered up before USB, the common properties would not be properly
initialized - and USB wouldn't work.

This issue was resolved in the recent refactoring of the QMP driver,
so it's now possible to remove this delay.

While there is still a timing dependency in the current implementation,
test indicates that it's now possible to boot with an external display
on USB Type-C and have the display power up, without disconnecting and
reconnecting the cable.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518729/
Link: https://lore.kernel.org/r/20230117172951.2748456-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: enable sourcesplit for sc7180/sc7280

According to the vendor dts files, both sc7180 and sc7280 support the
source split mode (using two LMs for a single output). Change these two
platforms to use MIXER_SDM845_MASK, which includes
DPU_MIXER_SOURCESPLIT. Rename MIXER_SC7180_MASK to MIXER_QCM2290_MASK,
since this platform doesn't seem to support source split mode.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518479/
Link: https://lore.kernel.org/r/20230116034435.569512-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: merge two CRTC debugfs dirs

For each CRTC we are creating two different debugfs directories one
using crtc index (created automatically for the CRC files) and another
one using CRTC name/object ID (for state and status files).

This can be confusing, so move our custom files to crtc->debugfs_entry,
effetively merging two debugfs dirs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518065/
Link: https://lore.kernel.org/r/20230112053659.1361298-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Disallow unallocated resources to be returned

In the event that the topology requests resources that have not been
created by the system (because they are typically not represented in
dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC
blocks, until their allocation/assignment is being sanity-checked in
"drm/msm/dpu: Reject topologies for which no DSC blocks are available")
remain NULL but will still be returned out of
dpu_rm_get_assigned_resources, where the caller expects to get an array
containing num_blks valid pointers (but instead gets these NULLs).

To prevent this from happening, where null-pointer dereferences
typically result in a hard-to-debug platform lockup, num_blks shouldn't
increase past NULL blocks and will print an error and break instead.
After all, max_blks represents the static size of the maximum number of
blocks whereas the actual amount varies per platform.

^1: which can happen after a git rebase ended up moving additions to
_dpu_cfg to a different struct which has the same patch context.

Fixes: bb00a452d6f7 ("drm/msm/dpu: Refactor resource manager")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517636/
Link: https://lore.kernel.org/r/20230109231556.344977-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: remove dpu_encoder_virt_ops

Struct dpu_encoder_virt_ops is used to provide several callbacks to the
phys_enc backends. However these ops are static and are not supposed to
change in the foreseeble future. Drop the indirection and call
corresponding functions directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516518/
Link: https://lore.kernel.org/r/20230102154748.951328-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Add missing check and destroy for alloc_ordered_workqueue

Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer.
Moreover, use the destroy_workqueue in the later fails in order to avoid
memory leak.

Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517419/
Link: https://lore.kernel.org/r/20230109022038.2163-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: qcom, mdss: fix HDMI PHY node names

On Qualcomm devices HDMI PHY node names were changed from hdmi-phy to
phy. Follow this change.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/517446/
Link: https://lore.kernel.org/r/20230109045453.316089-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add SM8150 MDSS & DPU

Add bindings for the display hardware on SM8150.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/514681/
Link: https://lore.kernel.org/r/20221212093315.11390-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/gem: Add check for kmalloc

Add the check for the return value of kmalloc in order to avoid
NULL pointer dereference in copy_from_user.

Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514678/
Link: https://lore.kernel.org/r/20221212091117.43511-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/gpu: Add default devfreq thresholds

Setup more appropriate devfreq tuning thresholds.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517788/
Link: https://lore.kernel.org/r/20230110231447.1939101-4-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/msm/gpu: Bypass PM QoS constraint for idle clamp

Change idle freq clamping back to the direct method, bypassing PM QoS
requests.  The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle.  The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.

This partially reverts commit 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device.  This also mostly undoes commit 78f815c1cf8f ("drm/msm: return the
average load over the polling period")

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/msm/gpu: Add devfreq tuning debugfs

Make the handful of tuning knobs available visible via debugfs.

v2: select DEVFREQ_GOV_SIMPLE_ONDEMAND because for some reason
    struct devfreq_simple_ondemand_data depends on this

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517784/
Link: https://lore.kernel.org/r/20230110231447.1939101-2-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/msm/a6xx: Update ROQ size in coredump

Since RoQ size differs between generations, calculate dynamically the
RoQ size while capturing coredump.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515610/
Link: https://lore.kernel.org/r/20221221203925.v2.4.I07f22966395eb045f6b312710f53890d5d7e69d4@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Update a6xx gpu coredump

Update gpu coredump for a660/a650 family of gpus with the extra
information available.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515608/
Link: https://lore.kernel.org/r/20221221203925.v2.3.Ifbfce6d693b202dac92006345bb825e7c5aee9c6@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Fix failure paths in msm_drm_init()

Ensure that we do drm_dev_put() when there is an early return in
msm_drm_init().

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515606/
Link: https://lore.kernel.org/r/20221221203925.v2.2.I49dfc3654040be61702e491f1aa63d3a5f308852@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()

Fix the below kernel panic due to null pointer access:
[   18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[   18.513464] Mem abort info:
[   18.516346]   ESR = 0x0000000096000005
[   18.520204]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.525706]   SET = 0, FnV = 0
[   18.528878]   EA = 0, S1PTW = 0
[   18.532117]   FSC = 0x05: level 1 translation fault
[   18.537138] Data abort info:
[   18.540110]   ISV = 0, ISS = 0x00000005
[   18.544060]   CM = 0, WnR = 0
[   18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[   18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[   18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[   18.696758] Call trace:
[   18.699278]  adreno_gpu_cleanup+0x30/0x88
[   18.703396]  a6xx_destroy+0xc0/0x130
[   18.707066]  a6xx_gpu_init+0x308/0x424
[   18.710921]  adreno_bind+0x178/0x288
[   18.714590]  component_bind_all+0xe0/0x214
[   18.718797]  msm_drm_bind+0x1d4/0x614
[   18.722566]  try_to_bring_up_aggregate_device+0x16c/0x1b8
[   18.728105]  __component_add+0xa0/0x158
[   18.732048]  component_add+0x20/0x2c
[   18.735719]  adreno_probe+0x40/0xc0
[   18.739300]  platform_probe+0xb4/0xd4
[   18.743068]  really_probe+0xfc/0x284
[   18.746738]  __driver_probe_device+0xc0/0xec
[   18.751129]  driver_probe_device+0x48/0x110
[   18.755421]  __device_attach_driver+0xa8/0xd0
[   18.759900]  bus_for_each_drv+0x90/0xdc
[   18.763843]  __device_attach+0xfc/0x174
[   18.767786]  device_initial_probe+0x20/0x2c
[   18.772090]  bus_probe_device+0x40/0xa0
[   18.776032]  deferred_probe_work_func+0x94/0xd0
[   18.780686]  process_one_work+0x190/0x3d0
[   18.784805]  worker_thread+0x280/0x3d4
[   18.788659]  kthread+0x104/0x1c0
[   18.791981]  ret_from_fork+0x10/0x20
[   18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[   18.801913] ---[ end trace 0000000000000000 ]---
[   18.809039] Kernel panic - not syncing: Oops: Fatal exception

Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515605/
Link: https://lore.kernel.org/r/20221221203925.v2.1.Ib978de92c4bd000b515486aad72e96c2481f84d0@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a2xx: support loading legacy (iMX) firmware

Support loading A200 firmware generated from the iMX firmware header
files. The firmware lacks protection support, however it allows GPU to
function properly while using the firmware files with clear license
which allows redistribution.

Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/516443/
Link: https://lore.kernel.org/r/20230101155753.779176-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Add MSM_SUBMIT_BO_NO_IMPLICIT

In cases where implicit sync is used, it is still useful (for things
like sub-allocation, etc) to allow userspace to opt-out of implicit
sync on per-BO basis.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/514216/
Link: https://lore.kernel.org/r/20221206192123.661448-1-robdclark@gmail.com

drm/msm/dpu: Add DSC configuration for SM8150 and SM8250

These DSC blocks on CTL V1 need to set its corresponding PINGPONG block
index in a hardware register to configure where to send pixel output to,
via the newly-added DPU_DSC_OUTPUT_CTRL feature flag.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515689/
Link: https://lore.kernel.org/r/20221221231943.1961117-9-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Implement DSC binding to PP block for CTL V1

All V1 CTL blocks (active CTLs) explicitly bind the pixel output from a
DSC block to a PINGPONG block by setting the PINGPONG index in a DSC
hardware register.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515698/
Link: https://lore.kernel.org/r/20221221231943.1961117-8-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Remove num_enc from topology struct in favour of num_dsc

Downstream calls this num_enc yet the DSC patches introduced a new
num_dsc struct member, leaving num_enc effectively unused.

Fixes: 7e9cc175b159 ("drm/msm/disp/dpu1: Add support for DSC in topology")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515688/
Link: https://lore.kernel.org/r/20221221231943.1961117-7-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Reject topologies for which no DSC blocks are available

Resource allocation of DSC blocks should behave more like LMs and CTLs
where NULL resources (based on initial hw_blk creation via definitions
in the catalog) are skipped ^1.  The current hardcoded mapping of DSC
blocks however means that resource allocation shouldn't succeed at all
when the DSC block on the corresponding index doesn't exist, rather than
searching for the next free block.

This hardcoded mapping should be loosened separately as DPU 5.0.0
introduced a crossbar where DSC blocks can be "somewhat" freely bound to
any PP and CTL (in proper pairs).

^1: which, on hardware that supports DSC, can happen after a git rebase
ended up moving additions to _dpu_cfg to a different struct which has
the same patch context.

Fixes: f2803ee91a41 ("drm/msm/disp/dpu1: Add DSC support in RM")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515684/
Link: https://lore.kernel.org/r/20221221231943.1961117-6-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Flip greater-than check for slice_count and slice_per_intf

According to downstream /and the comment copied from it/ this comparison
should be the other way around.  In other words, when the panel driver
requests to use more slices per packet than what could be sent over this
interface, it is bumped down to only use a single slice per packet (and
strangely not the number of slices that could fit on the interface).

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515686/
Link: https://lore.kernel.org/r/20221221231943.1961117-4-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Use DSC slice(s) packet size to compute word count

According to downstream the value to use for WORD_COUNT is
bytes_per_pkt, which denotes the number of bytes in a packet based on
how many slices have been configured by the panel driver times the
width of a slice times the number of bytes per pixel.

The DSC panels seen thus far use one byte per pixel, only one slice
per packet, and a slice width of half the panel width leading to the
desired bytes_per_pkt+1 value to be equal to hdisplay/2+1.  This however
isn't the case anymore for panels that configure two slices per packet,
where the value should now be hdisplay+1.

Note that the aforementioned panel (on a Sony Xperia XZ3, sdm845) with
slice_count=1 has also been tested to successfully accept slice_count=2,
which would have shown corrupted output previously.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515694/
Link: https://lore.kernel.org/r/20221221231943.1961117-3-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Wire up DSC mask for active CTL configuration

Active CTLs have to configure what DSC block(s) have to be enabled, and
what DSC block(s) have to be flushed; this value was initialized to zero
resulting in the necessary register writes to never happen (or would
write zero otherwise).  This seems to have gotten lost in the DSC v4->v5
series while refactoring how the combination with merge_3d was handled.

Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515693/
Link: https://lore.kernel.org/r/20221221231943.1961117-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: mdss: add support for SM8550

Add support for the MDSS block on SM8550 platform.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517516/
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-5-660c3bcb127f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add support for SM8550

Add definitions for the display hardware used on Qualcomm SM8550
platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517512/
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-4-660c3bcb127f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Introduce SC8280XP MDSS

Add compatible for the SC8280XP Mobile Display Subsystem and
initialization for version 8.0.0.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514402/
Link: https://lore.kernel.org/r/20221207220012.16529-4-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Introduce SC8280XP

The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
necessary definitions and describe the DPU in the SC8280XP.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514398/
Link: https://lore.kernel.org/r/20221207220012.16529-3-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add binding for SC8280XP MDSS

Add binding for the display subsystem and display processing unit in the
Qualcomm SC8280XP platform.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/514396/
Link: https://lore.kernel.org/r/20221207220012.16529-2-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Add support for SM8350

Add compatibles string, "qcom,sm8350-mdss", for the multimedia display
subsystem unit used on Qualcomm SM8350 platform.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516345/
Link: https://lore.kernel.org/r/20221230153554.105856-6-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: disable DSC blocks for SM8350

SM8350 has newer version of DSC blocks, which are not supported by the
driver yet. Remove them for now until these blocks are supported by the
driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517629/
Link: https://lore.kernel.org/r/20230109214309.586130-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add support for SM8350

Add compatibles string, "qcom,sm8350-dpu", for the display processing unit
used on Qualcomm SM8350 platform.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516342/
Link: https://lore.kernel.org/r/20221230153554.105856-5-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add SM8350 to hw catalog

Add compatibility for SM8350 display subsystem, including
required entries in DPU hw catalog.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516340/
Link: https://lore.kernel.org/r/20221230153554.105856-4-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: Add qcom, sm8350-mdss binding

Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for MDSS device
tree bindings

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/516338/
Link: https://lore.kernel.org/r/20221230153554.105856-3-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: Add qcom, sm8350-dpu binding

Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for DPU device
tree bindings

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/516337/
Link: https://lore.kernel.org/r/20221230153554.105856-2-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: mdss add support for SM8450

Add support for the MDSS block on SM8450 platform.

Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514247/
Link: https://lore.kernel.org/r/20221207012231.112059-12-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add support for SM8450

Add definitions for the display hardware used on Qualcomm SM8450
platform.

Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514235/
Link: https://lore.kernel.org/r/20221207012231.112059-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add support for MDP_TOP blackhole

On sm8450 a register block was removed from MDP TOP. Accessing it during
snapshotting results in NoC errors / immediate reboot. Skip accessing
these registers during snapshot.

Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514239/
Link: https://lore.kernel.org/r/20221207012231.112059-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: merge all MDP TOP registers to dpu_hwio.h

There is a separate header containing some of MDP TOP register
definitions, dpu_hwio.h. Move missing register definitions from
dpu_hw_top.c to the mentioned header.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514242/
Link: https://lore.kernel.org/r/20221207012231.112059-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add support for the display on SM8450

Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
SM8450 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514234/
Link: https://lore.kernel.org/r/20221207012231.112059-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: *dpu.yaml: split required properties clauses

Require only properties declared in given schema, which makes the code a
bit more readable and easy to follow.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514229/
Link: https://lore.kernel.org/r/20221207012231.112059-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>