arm64: dts: qcom: sdm670: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-5-b4a985f57b8b@linaro.org

arm64: dts: qcom: sc8180x: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-4-b4a985f57b8b@linaro.org

arm64: dts: qcom: qdu1000: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 6bd20c54b589 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-3-b4a985f57b8b@linaro.org

arm64: dts: qcom: sm6350: Add PSCI idle states

Add the PSCI idle states so that the CPU (among other things) can
reach lower power states.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-2-b4a985f57b8b@linaro.org

arm64: dts: qcom: ipq9574: add few more reserved memory region

In IPQ SoCs, bootloader will collect the system RAM contents upon crash
for post-morterm analysis. If we don't reserve the memory region used
by bootloader, obviously linux will consume it and upon next boot on
crash, bootloader will be loaded in the same region, which will lead to
loss of some data, sometimes we may miss out critical information.
So lets reserve the region used by the bootloader.

Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.

While at it, drop the size padding in the reserved memory region,
wherever applicable

Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602084431.19134-1-quic_anusha@quicinc.com

arm64: dts: qcom: ipq5332: add support for the RDP474 variant

Add the initial device tree support for the Reference Design
Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, eMMC, I2C and GPIO based buttons.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-5-quic_kathirav@quicinc.com

dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family

Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332
family of SoCs.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-4-quic_kathirav@quicinc.com

arm64: dts: qcom: sc8280xp: add resets for soundwire controllers

Soundwire controllers on sc8280xp needs an explicit reset, add
support for this.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-6-srinivas.kandagatla@linaro.org

Merge branch '20230608125315.11454-2-srinivas.kandagatla@linaro.org' into arm64-for-6.5

Merge the SC8280XP LPASSCC DeviceTree bindings in order to get access
to the newly added reset defines.

dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP

The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
support when it is under the control of Q6DSP.

Add support for those resets and adds IDs for clients to request the reset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org

dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP

The LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.

Add support for those resets and adds IDs for clients to request the reset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org

arm64: dts: qcom: sm8550-mtp: add sound card

Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.  The recording links were not tested,
but should be similar to previous platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add sound card

Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.  The recording links were not tested,
but should be similar to previous platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-mtp: add WSA8845 speakers

Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add WSA8845 speakers

Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: Add SDX75 platform and IDP board support

Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com

dt-bindings: arm: qcom: Document SDX75 platform and boards

Document the SDX75 platform binding and also the boards using it.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-2-git-send-email-quic_rohiagar@quicinc.com

Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into arm64-for-6.5

Merge the SDX75 GCC DeviceTree binding, in order to get access to the
clock defines in the DeviceTree source.

arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons

The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.

Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org

arm64: dts: qcom: pmk8550: always enable RTC PMIC device

There's no reason to keep the RTC disabled, it has been tested
and is functional on the SM8550 QRD and MTP boards.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-3-a288f24af81b@linaro.org

arm64: dts: qcom: sm8550-qrd: add notification RGB LED

The QRD features a notification LED connected to the pm8550.
Configure the RGB led controlled by the PMIC PWM controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-2-a288f24af81b@linaro.org

arm64: dts: qcom: pm8550: add PWM controller

Add the PWM function to the pm8550 dtsi, this is usually used
to drive RGB leds on platforms using this PMIC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-1-a288f24af81b@linaro.org

arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX

The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.

This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com

arm64: dts: qcom: sc8180x: Fix adreno smmu compatible

The adreno smmu should be compatible with qcom,adreno-smmu as well for
per-process page tables to work.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com

arm64: dts: qcom: sc8180x-primus: dispcc is already okay

&dispcc status was changed to okay by default in the platform, no need
to do it again in the board.

Fixes: 2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com

arm64: dts: qcom: sm8550: add display port nodes

Add the Display Port controller subnode to the MDSS node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-2-ac2c6899d22c@linaro.org

arm64: dts: qcom: sm8550: fix low_svs RPMhPD labels

"low" was written "lov", fix this.

Fixes: 99d33ee61cb0 ("arm64: dts: qcom: sm8550: Add missing RPMhPD OPP levels")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-1-ac2c6899d22c@linaro.org

arm64: dts: qcom: sa8540p-ride: Specify ethernet phy OUI

With wider usage on more boards, there have been reports of the
following:

    [  315.016174] qcom-ethqos 20000.ethernet eth0: no phy at addr -1
    [  315.016179] qcom-ethqos 20000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)

which has been fairly random and isolated to specific boards.
Early reports were written off as a hardware issue, but it has been
prevalent enough on boards that theory seems unlikely.

In bring up of a newer piece of hardware, similar was seen, but this
time _consistently_. Moving the reset to the mdio bus level (which isn't
exactly a lie, it is the only device on the bus so one could model it as
such) fixed things on that platform. Analysis on sa8540p-ride shows that
the phy's reset is not being handled during the OUI scan if the reset
lives in the phy node:

    # gpio 752 is the reset, and is active low, first mdio reads are the OUI
    modprobe-420     [006] .....   154.738544: mdio_access: stmmac-0 read  phy:0x08 reg:0x02 val:0x0141
    modprobe-420     [007] .....   154.738665: mdio_access: stmmac-0 read  phy:0x08 reg:0x03 val:0x0dd4
    modprobe-420     [004] .....   154.741357: gpio_value: 752 set 1
    modprobe-420     [004] .....   154.741358: gpio_direction: 752 out (0)
    modprobe-420     [004] .....   154.741360: gpio_value: 752 set 0
    modprobe-420     [006] .....   154.762751: gpio_value: 752 set 1
    modprobe-420     [007] .....   154.846857: gpio_value: 752 set 1
    modprobe-420     [004] .....   154.937824: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
    modprobe-420     [004] .....   154.937932: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014

Moving it to the bus level, or specifying the OUI in the phy's
compatible ensures the reset is handled before any mdio access
Here is tracing with the OUI approach (which skips scanning the OUI):

    modprobe-549     [007] .....    63.860295: gpio_value: 752 set 1
    modprobe-549     [007] .....    63.860297: gpio_direction: 752 out (0)
    modprobe-549     [007] .....    63.860299: gpio_value: 752 set 0
    modprobe-549     [004] .....    63.882599: gpio_value: 752 set 1
    modprobe-549     [005] .....    63.962132: gpio_value: 752 set 1
    modprobe-549     [006] .....    64.049379: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
    modprobe-549     [006] .....    64.049490: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014

The OUI approach is taken given the description matches the situation
perfectly (taken from ethernet-phy.yaml):

    - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
      description:
        If the PHY reports an incorrect ID (or none at all) then the
        compatible list may contain an entry with the correct PHY ID
        in the above form.
        The first group of digits is the 16 bit Phy Identifier 1
        register, this is the chip vendor OUI bits 3:18. The
        second group of digits is the Phy Identifier 2 register,
        this is the chip vendor OUI bits 19:24, followed by 10
        bits of a vendor specific ID.

With this in place the sa8540p-ride's phy is probing consistently, so
it seems the floating reset during mdio access was the issue. In either
case, it shouldn't be floating so this improves the situation. The below
link discusses some of the relationship of mdio, its phys, and points to
this OUI compatible as a way to opt out of the OUI scan pre-reset
handling which influenced this decision.

Link: https://lore.kernel.org/all/dca54c57-a3bd-1147-63b2-4631194963f0@gmail.com/
Fixes: 57827e87be54 ("arm64: dts: qcom: sa8540p-ride: Add ethernet nodes")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608201513.882950-1-ahalaney@redhat.com

arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G

Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm
SC8180X platform. Supported peripherals includes keyboard, touchpad,
UFS storage, external USB and WiFi.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-16-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Introduce Primus

Introduce support for the SC8180X reference device, aka Primus, with
debug UART, regulators, UFS and USB support.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-15-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add pmics

SC8180X based platforms have PM8150, PM8150C, PMC8180 and SMB2351 PMICs,
so add these as well

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-14-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add display and gpu nodes

This patch adds gpu, gmu, gpucc, dispcc and finally the mdss node with
dsi0/1, dp0/1 and edp subnodes as found in this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-13-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes

This patch adds remoteprocs, wifi and usb and usb phy nodes
for this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-12-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add PCIe instances

This patch adds PCIe instances found on this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-11-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add QUPs

This patch adds qup instances and i2c, spi, serial ports

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-10-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add thermal zones

This patch adds tsens nodes and thermal zones for sc8180x SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-9-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add interconnects and lmh

This add interconnect nodes and add LMH to sc8180x SoC dtsi

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-8-vkoul@kernel.org

arm64: dts: qcom: Introduce the SC8180x platform

Introduce a base dtsi for the Qualcomm SC8180x platform, with CPUs,
global clock controller, SMMU, rpmh clocks, rpmh power-domains,
CPUfreq etc

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-7-vkoul@kernel.org

arm64: dts: qcom: msm8916: Move aliases to boards

MSM8939 has the aliases defined separately for each board (because
there could be (theoretically) a board where the slots are numbered
differently. To make MSM8916 and MSM8939 more consistent do the same
for all MSM8916 boards and move aliases there.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-6-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec

All definitions in pm8916.dtsi use the &pm8916_ label prefix, only the
codec uses the &wcd_codec label. &wcd_codec is confusing because the
codec on MSM8916 is split into a "wcd-digital" and "wcd-analog" part
and both could be described with &wcd_codec.

Let's just name it &pm8916_codec so it's consistent with all other PMIC
device nodes.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-5-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916/39: Clean up MDSS labels

Right now MDSS related definitions cannot be properly grouped together
in board DTs because the labels do not use consistent prefixes. The DSI
PHY label is particularly weird because the DSI number is at the end
(&dsi_phy0) while DSI itself is called &dsi0.

Follow the example of more recent SoCs and give all the MDSS related
nodes a consistent label that allows proper grouping.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-4-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl

Make the labels for the BLSP I2C/SPI pinctrl consistent with the one
used for UART by adding the missing blsp_ prefix. This allows having
them properly grouped together.

The nodes are only reordered in msm8939.dtsi for now since the pinctrl
definitions in msm8916-pins.dtsi are currently still unordered anyway.
(I will try fixing this in a future patch.)

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-3-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN

For some reason the BLSP UART controllers have a label with a number
behind blsp (&blsp1_uartN) while I2C/SPI are named without (&blsp_i2cN).
This is confusing, especially for proper node ordering in board DTs.

Right now all board DTs are ordered as if the number behind blsp does
not exist (&blsp_i2cN comes before &blsp1_uartN). Strictly speaking
correct ordering would be the other way around ('1' comes before '_').

End this confusion by giving the UART controllers consistent labels.
There is just one BLSP on MSM8916/39 so the number is redundant.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-2-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm

MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.

Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: qrb4210-rb2: Enable USB node

Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-5-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm6115: Add USB SS qmp phy node

Add USB superspeed qmp phy node to dtsi.

Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-4-bhupesh.sharma@linaro.org

arm64: dts: qcom: ipq5332: add support for the RDP442 variant

Add the initial device tree support for the Reference Design
Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, SPI NOR, eMMC and I2C.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-3-quic_kathirav@quicinc.com

dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family

Document the MI01.3 (Reference Design Platform 442) board based on IPQ5332
family of SoCs.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-2-quic_kathirav@quicinc.com

arm64: dts: qcom: sm8550: Add graphics clock controller

Add device node for graphics clock controller on Qualcomm
SM8550 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524181800.28717-4-quic_jkona@quicinc.com

Merge branch 'sm8450-sm8550-gpucc-binding' into arm64-for-6.5

Introduce DeviceTree bindings for SM8450 and SM8550 GPU clock
controller, to introduce the constants necessary to referr to these
clocks.

dt-bindings: clock: qcom: Add SM8550 graphics clock controller

Add device tree bindings for the graphics clock controller on
Qualcomm SM8550 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524181800.28717-2-quic_jkona@quicinc.com

dt-bindings: clock: Add Qcom SM8450 GPUCC

Add device tree bindings for the graphics clock controller on Qualcomm
Technology Inc's SM8450 SoCs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-waipio-gpucc-v1-1-4f40e282af1d@linaro.org

arm64: dts: qcom: sa8775p-ride: enable i2c11

This enables the i2c11 node on sa8775p-ride board for A2B controller
and audio port expander.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-6-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes

Add remaining uart5 and uart9 nodes for UART bus present on sa8775p
SoC.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-5-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add missing spi nodes

Add the missing nodes of the SPI buses present on sa8775p platform.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-4-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add missing i2c nodes

Add the missing nodes for the i2c buses present on sa8775p Soc.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-3-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node

Add zeroth and third instance of the QUPv3 engine to the sa8775p.dtsi.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-2-quic_shazhuss@quicinc.com

arm64: dts: qcom: apq8096: fix fixed regulator name property

Correct the typo in 'regulator-name' property.

  apq8096-ifc6640.dtb: v1p05-regulator: 'regulator-name' is a required property
  apq8096-ifc6640.dtb: v1p05-regulator: Unevaluated properties are not allowed ('reglator-name' was unexpected)

Fixes: 6cbdec2d3ca6 ("arm64: dts: qcom: msm8996: Introduce IFC6640")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8996: correct MMCC clocks order

Re-order the clocks for MMCC clock controller node to match the bindings (Linux
driver takes by name):

  msm8996-mtp.dtb: clock-controller@8c0000: clock-names:1: 'gpll0' was expected
  msm8996-mtp.dtb: clock-controller@8c0000: clock-names:2: 'gcc_mmss_noc_cfg_ahb_clk' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916: correct LPASS CPU clocks order

Re-order the clocks for LPASS CPU node to match the bindings (Linux
driver takes by name):

  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:1: 'mi2s-bit-clk0' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:2: 'mi2s-bit-clk1' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:3: 'mi2s-bit-clk2' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:4: 'mi2s-bit-clk3' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:5: 'pcnoc-mport-clk' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:6: 'pcnoc-sway-clk' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845: Add stream-id of qspi to iommus

As part of DMA mode support to qspi driver.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682328761-17517-5-git-send-email-quic_vnivarth@quicinc.com

arm64: dts: qcom: sc7280: Add stream-id of qspi to iommus

As part of DMA mode support to qspi driver.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682328761-17517-4-git-send-email-quic_vnivarth@quicinc.com

arm64: dts: qcom: sc7180: Add stream-id of qspi to iommus

As part of DMA mode support to qspi driver.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682328761-17517-3-git-send-email-quic_vnivarth@quicinc.com

arm64: dts: qcom: msm8996: correct /soc/bus ranges

The bus@0 node should have reg or ranges to fix dtbs W=1 warnings:

  Warning (unit_address_vs_reg): /soc@0/bus@0: node has a unit name, but no reg or ranges property
  Warning (simple_bus_reg): /soc@0/bus@0: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420180746.860934-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm630-nile: correct duplicated reserved memory node

SoC DTSI already comes with 85800000 reserved memory node, so assume the
author wanted to update its length.  This fixes dtbs W=1 warning:

  Warning (unique_unit_address_if_enabled): /reserved-memory/qhee-code@85800000: duplicate unit-address (also used in node /reserved-memory/reserved@85800000)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211921.79871-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm6125-sprout: align ADC channel node names with bindings

Bindings expect ADC channel node names to follow specific pattern:

  sm6125-xiaomi-laurel-sprout.dtb: adc@3100: 'adc-chan@4d', 'adc-chan@4e', 'adc-chan@52', 'adc-chan@54' do not match any of the regexes: ...

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-6-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add missing PCIE1 PHY AUX clock frequency

The SM8550 DTSI defines a fixed PCIE1 PHY AUX clock and expects boards
to define frequency.  Use the same as in MTP8550 to fix:

  sm8550-qrd.dtb: pcie-1-phy-aux-clk: 'clock-frequency' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8250: add missing qcom,smmu-500 fallback

Since commit 6c84bbd103d8 ("dt-bindings: arm-smmu: Add generic
qcom,smmu-500 bindings") the SMMU is supposed to use qcom,smmu-500
compatible fallback:

  ['qcom,sm8250-smmu-500', 'qcom,adreno-smmu', 'qcom,smmu-500', 'arm,mmu-500'] is too long
  'qcom,sm8250-smmu-500' is not one of ['qcom,msm8996-smmu-v2', 'qcom,msm8998-smmu-v2', 'qcom,sdm630-smmu-v2']
  'qcom,sm8250-smmu-500' is not one of ['qcom,msm8996-smmu-v2', 'qcom,sc7180-smmu-v2', 'qcom,sdm630-smmu-v2', 'qcom,sdm845-smmu-v2'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: qdu1000: add missing qcom,smmu-500 fallback

Since commit 6c84bbd103d8 ("dt-bindings: arm-smmu: Add generic
qcom,smmu-500 bindings") the SMMU is supposed to use qcom,smmu-500
compatible fallback:

  ['qcom,qdu1000-smmu-500', 'arm,mmu-500'] is too short
  ['qcom,qdu1000-smmu-500', 'arm,mmu-500'] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: ipq8074: drop incorrect SPI bus spi-max-frequency

The spi-max-frequency property belongs to SPI devices, not SPI
controller:

  ipq8074-hk01.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: ipq6018: drop incorrect SPI bus spi-max-frequency

The spi-max-frequency property belongs to SPI devices, not SPI
controller:

  ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: add few more reserved memory region

In IPQ SoCs, bootloader will collect the system RAM contents upon crash
for the post morterm analysis. If we don't reserve the memory region used
by bootloader, obviously linux will consume it and upon next boot on
crash, bootloader will be loaded in the same region, which will lead to
loose some of the data, sometimes we may miss out critical information.
So lets reserve the region used by the bootloader.

Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.

While at it, drop the size padding in the reserved memory region,
wherever applicable.

Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526110653.27777-4-quic_viswanat@quicinc.com

arm64: dts: qcom: enable the download mode support

Like any other Qualcomm SoCs, IPQ8074 and IPQ6018 also supports the
download mode to collect the RAM dumps if system crashes, to perform
the post mortem analysis. Add support for the same.

Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526110653.27777-3-quic_viswanat@quicinc.com

arm64: dts: qcom: sm8450: add crypto nodes

Add crypto engine (CE) and CE BAM related nodes and definitions
for the SM8450 SoC.

Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[Bhupesh: Corrected the compatible list]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-12-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8350: Add Crypto Engine support

Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8350.dtsi'.

Co-developed-by and Signed-off-by: Robert Foss <rfoss@kernel.org>
[Bhupesh: Switch to '#interconnect-cells = <2>', available since commit 4f287e31ff5f]

Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-11-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8250: Add Crypto Engine support

Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8250.dtsi'.

Co-developed-by and Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-10-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8150: Add Crypto Engine support

Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8150.dtsi'.

Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-9-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm6115: Add Crypto Engine support

Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm6115.dtsi'.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-8-bhupesh.sharma@linaro.org

arm64: dts: qcom: sdm845: Fix the slimbam DMA engine compatible string

As per documentation, Qualcomm SDM845 SoC supports SLIMBAM DMA
engine v1.7.4, so use the correct compatible strings.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-5-bhupesh.sharma@linaro.org

arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string

As per documentation, Qualcomm SM8550 SoC supports BAM DMA
engine v1.7.4, so use the correct compatible strings.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-4-bhupesh.sharma@linaro.org

arm64: dts: qcom: ipq9574: add QFPROM node

IPQ9574 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-5-quic_kathirav@quicinc.com

arm64: dts: qcom: ipq6018: add QFPROM node

IPQ6018 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-4-quic_kathirav@quicinc.com

arm64: dts: qcom: ipq5332: add QFPROM node

IPQ5332 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-3-quic_kathirav@quicinc.com

dt-bindings: nvmem: qfprom: add compatible for few IPQ SoCs

Add the QFPROM compatible for IPQ5332, IPQ6018 and IPQ9574

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-2-quic_kathirav@quicinc.com

arm64: dts: qcom: ipq9574: add support for RDP453 variant

Add the initial device tree support for the Reference Design Platform (RDP)
453 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR and SMPA1 regulator node.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526153152.777-3-quic_devipriy@quicinc.com

dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family

Document AL02-C8 (Reference Design Platform 453) board based on IPQ9574
family of SoCs.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526153152.777-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: add support for RDP449 variant

Add the initial device tree support for the Reference Design Platform (RDP)
449 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR and SMPA1 regulator node.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516135013.3547-3-quic_devipriy@quicinc.com

dt-bindings: arm: qcom: document AL02-C6 board based on IPQ9574 family

Document AL02-C6 (Reference Design Platform 449) board based on IPQ9574
family of SoCs.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516135013.3547-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: add support for RDP418 variant

Add the initial device tree support for the Reference Design Platform (RDP)
418 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR, eMMC and SMPA1 regulator node.

Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510104359.16678-3-quic_devipriy@quicinc.com

dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family

Document AL02-C2 (Reference Design Platform 418) board based on IPQ9574
family of SoCs.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510104359.16678-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add cpufreq support

Add cpu freq nodes in the device tree to bump cpu frequency above 800MHz.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-4-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add SMPA1 regulator node

Add support for SMPA1 regulator node in IPQ9574.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-3-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add RPM related nodes

Add RPM Glink & RPM message RAM nodes to support frequency scaling
on IPQ9574.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add support for APSS clock controller

Add the APCS & A73 PLL nodes to support CPU frequency scaling.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406061314.10916-5-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: rename al02-c7 dts to rdp433

Rename the dts after Reference Design Platform(RDP) to adopt
standard naming convention.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230425084010.15581-7-quic_devipriy@quicinc.com

arm64: dts: qcom: pm7250b: add missing spmi-vadc include

This file is using definitions from the spmi-vadc header, so we need to
include it.

Fixes: 11975b9b8135 ("arm64: dts: qcom: Add pm7250b PMIC")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407-pm7250b-sid-v1-1-fc648478cc25@fairphone.com

arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua

Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip".

Tulip is paired with:

- wcn3660
- smb1360 battery charger
- 720p Truly NT35521 Panel

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-6-bryan.odonoghue@linaro.org

arm64: dts: qcom: Add Square apq8039-t2 board

The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi
chipset.

Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-5-bryan.odonoghue@linaro.org

arm64: dts: qcom: Add msm8939-pm8916.dtsi include

The msm8939-pm8916.dtsi include configures the regulator supplies of
MSM8939 used together with PM8916, as recommended by Qualcomm. In rare
cases where boards deviate from the recommended design they can just
avoid using this include.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-4-bryan.odonoghue@linaro.org

arm64: dts: qcom: Add msm8939 SoC

Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key
differences to msm8916.

- big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz
- DRAM 1x800 LPDDR3
- Camera 4+4 lane CSI
- Venus @ 1080p60 HEVC
- DSI x 2
- Adreno A405
- WiFi wcn3660/wcn3680b 802.11ac

Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Co-developed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-3-bryan.odonoghue@linaro.org