Alan Modra [Mon, 17 Dec 2018 22:50:06 +0000 (09:20 +1030)]
PR23980, assertion fail
All of the backend relocate_section functions that interpret reloc
numbers assuming the input file is of the expected type (ie. same as
output or very similar) really ought to be checking input file type.
Not many do, and those that do currently just assert. This patch
replaces the assertion with a more graceful exit.
PR 23980
* elf32-i386.c (elf_i386_relocate_section): Exit with wrong format
error rather than asserting input file is as expected.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-sh.c (sh_elf_relocate_section): Likewise.
* elf32-xtensa.c (elf_xtensa_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Exit with wrong format
error if input file is not ppc32 ELF.
Andrew Burgess [Mon, 5 Feb 2018 11:15:38 +0000 (11:15 +0000)]
sim: Don't overwrite stored errno in sim_syscall_multi
The host syscall callback mechanism should take care of updating the
errcode within the CB_SYSCALL struct, and we should not be adjusting
the error code once the syscall has completed. We especially, should
not be rewriting the syscall errcode based on the value of errno some
time after running the host syscall, as there is no guarantee that
errno has not be overwritten.
To perform a syscall we call cb_syscall (in syscall.c). To return
from cb_syscall control passes through one of two exit paths these are
labeled FinishSyscall and ErrorFinish and are reached using goto
statements scattered throughout the cb_syscall function.
In FinishSyscall we store the syscall result in 'sc->result', and the
error code is transated to target encoding, and stored in
'sc->errcode'.
In ErrorFinish, we again store the syscall result in 'sc->result', and
fill in 'sc->errcode' by fetching the actual errno from the host with
the 'cb->get_errno' callback.
In both cases 'sc->errcode' will have been filled in with an
appropriate value.
Further, if we look at a specific syscall example, CB_SYS_open, in
this case the first thing we do is fetch the path to open from the
target with 'get_path', if this fails then the errcode is returned,
and we jump to FinishSyscall. Notice that in this case, no host
syscall may have been performed, for example a failure to read the
path to open out of simulated memory can return EINVAL without
performing any host syscall. Given that no host syscall has been
performed, reading the host errno makes absolutely no sense.
This commit removes from sim_syscall_multi the rewriting of
sc->errcode based on the value of errno, and instead relies on the
value stored in the cb_syscall.
sim/common/ChangeLog:
* sim-syscall.c (sim_syscall_multi): Don't update sc->errcode at
this point, it should have already been set in cb_syscall.
GDB Administrator [Tue, 18 Dec 2018 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Wed, 31 Oct 2018 13:39:58 +0000 (13:39 +0000)]
gdb/dwarf: Convert some predicates from int to bool
In the dwarf reader we have a set of predicates, these include the
different producer predicates and also some control predicates. The
older ones are declared as integers, while newer ones (added since the
C++ conversion) are bool.
This commit makes them all bool for consistency. There should be no
user visible change after this commit.
gdb/ChangeLog:
* dwarf2read.c (struct dwarf2_cu): Convert the fields 'mark',
'has_loclist', 'checked_producer', 'producer_is_gxx_lt_4_6',
'producer_is_gcc_lt_4_3', 'producer_is_icc_lt_14',
'processing_has_namespace_info' from unsigned int to bool. Update
comments.
(producer_is_icc_lt_14): Update return type.
(producer_is_gcc_lt_4_3): Likewise.
(producer_is_gxx_lt_4_6): Likewise.
(process_die): Write true instead of 1 into predicate fields.
(dwarf2_start_symtab): Likewise.
(var_decode_location): Likewise.
(dwarf2_mark_helper): Likewise.
(dwarf2_mark): Likewise.
(dwarf2_clear_marks): Write false instead of 0 into predicate
field.
(dwarf2_cu::dwarf2_cu): Initialise predicate fields to false, not
0.
Alan Modra [Mon, 17 Dec 2018 22:29:59 +0000 (08:59 +1030)]
PR23980, powerpc64 ld segfault
PR 23980
* elf64-ppc.c (ppc64_elf_hide_symbol): Check hash table type
before referencing ppc64-only fields of hash entries.
Szabolcs Nagy [Thu, 13 Dec 2018 17:47:17 +0000 (17:47 +0000)]
AArch64: Fix the gdb build with musl libc
Including asm/sigcontext.h together with libc headers is not valid. In
general linux headers may not work with libc headers, so mixing them
should be avoided, especially when the linux header defines types that
are also exposed in libc headers.
In case of asm/sigcontext.h glibc happens to work because glibc signal.h
directly includes it, but e.g. in musl libc signal.h replicates the
sigcontext.h definitions in an abi compatible way which are in conflict
with the linux definitions when both headers are included.
Since old linux headers or old libc headers may not have the necessary
definitions, gdb has to replicate the definitions it relies on anyway.
Which is fine since all definitions must be ABI stable. For linux apis
that are not available via libc headers, replicating the definitions in
gdb is the most reliable way to use them.
Note: asm/ptrace.h includes asm/sigcontext.h in some versions of linux
headers, which is just as problematic and should be fixed in linux.
gdb/ChangeLog:
* nat/aarch64-sve-linux-ptrace.h: Include signal.h instead of
asm/sigcontext.h.
Philippe Waroquiers [Mon, 17 Dec 2018 05:52:15 +0000 (06:52 +0100)]
OBVIOUS: Fix ARI warning by removing warning trailing new line
2018-12-17 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-ptrace.c (kill_child): Fix ARI warning by removing
warning trailing new line.
Alan Modra [Sun, 16 Dec 2018 12:32:50 +0000 (23:02 +1030)]
PR23994, libbfd integer overflow
PR 23994
* aoutx.h: Include limits.h.
(get_reloc_upper_bound): Detect long overflow and return a file
too big error if it occurs.
* elf.c: Include limits.h.
(_bfd_elf_get_symtab_upper_bound): Detect long overflow and return
a file too big error if it occurs.
(_bfd_elf_get_dynamic_symtab_upper_bound): Likewise.
(_bfd_elf_get_dynamic_reloc_upper_bound): Likewise.
GDB Administrator [Mon, 17 Dec 2018 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Philippe Waroquiers [Sat, 3 Nov 2018 19:18:15 +0000 (20:18 +0100)]
Factorize killing the children in linux-ptrace.c, and fix a 'process leak'.
Running the gdb testsuite under Valgrind started to fail after 100+ tests,
due to out of memory caused by lingering processes.
The lingering processes are caused by the combination
of a limitation in Valgrind signal handling when using PTRACE_TRACEME
and a (minor) bug in GDB.
The Valgrind limitation is : when a process is ptraced and raises
a signal, Valgrind will replace the raised signal by SIGSTOP as other
signals are masked by Valgrind when executing a system call.
Removing this limitation seems far to be trivial, valgrind signal
handling is very complex.
Due to this valgrind limitation, GDB linux_ptrace_test_ret_to_nx gets
a SIGSTOP signal instead of the expected SIGTRAP or SIGSEGV.
In such a case, linux_ptrace_test_ret_to_nx does an early return, but
does not kill the child (running under valgrind), child stays in a STOP-ped
state.
These lingering processes then eat the available system memory,
till launching a new process starts to fail.
This patch fixes the GDB minor bug by killing the child in case
linux_ptrace_test_ret_to_nx does an early return.
nat/linux-ptrace.c has 3 different logics to kill a child process.
So, this patch factorizes killing a child in the function kill_child.
The 3 different logics are:
* linux_ptrace_test_ret_to_nx is calling both kill (child, SIGKILL)
and ptrace (PTRACE_KILL, child, ...), and then is calling once
waitpid.
* linux_check_ptrace_features is calling ptrace (PTRACE_KILL, child, ...)
+ my_waitpid in a loop, as long as the waitpid status was WIFSTOPPED.
* linux_test_for_tracefork is calling once ptrace (PTRACE_KILL, child, ...)
+ my_waitpid.
The linux ptrace documentation indicates that PTRACE_KILL is deprecated,
and tells to not use it, as it might return success but not kill the tracee.
The documentation indicates to send SIGKILL directly.
I suspect that linux_ptrace_test_ret_to_nx calls both kill and ptrace just
to be sure ...
I suspect that linux_check_ptrace_features calls ptrace in a loop
to bypass the PTRACE_KILL limitation.
And it looks like linux_test_for_tracefork does not handle the PTRACE_KILL
limitation.
Also, 2 of the 3 logics are calling my_waitpid, which seems better,
as this is protecting the waitpid syscall against EINTR.
So, the logic in kill_child is just using kill (child, SIGKILL)
+ my_waitpid, and then does a few verifications to see everything worked
accordingly to the plan.
Tested on Debian/x86_64.
2018-12-16 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-ptrace.c (kill_child): New function.
(linux_ptrace_test_ret_to_nx): Use kill_child instead of local code.
Add a call to kill_child in case of early return after fork.
(linux_check_ptrace_features): Use kill_child instead of local code.
(linux_test_for_tracefork): Likewise.
GDB Administrator [Sun, 16 Dec 2018 00:01:06 +0000 (00:01 +0000)]
Automatic date update in version.in
Tom Tromey [Sat, 15 Dec 2018 01:58:32 +0000 (18:58 -0700)]
Minor gdb/Makefile.in cleanups
This removes an IMO not very useful comment in gdb/Makefile.in about
"alloca". It also removes INFOFILES, which I think probably has not
been useful since whenever the manual was moved into a subdirectory.
gdb/ChangeLog
2018-12-14 Tom Tromey <tom@tromey.com>
* Makefile.in: Remove "alloca" comment.
(INFOFILES): Remove.
(local-maintainer-clean): Don't use INFOFILES.
GDB Administrator [Sat, 15 Dec 2018 00:00:26 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 14 Dec 2018 12:55:08 +0000 (04:55 -0800)]
elf: Add PT_GNU_PROPERTY segment type
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
GDB Administrator [Fri, 14 Dec 2018 00:00:46 +0000 (00:00 +0000)]
Automatic date update in version.in
Jeff Law [Thu, 13 Dec 2018 22:45:24 +0000 (15:45 -0700)]
Fix typo/thinko in last change.
* dw2gencfi.c (output_cie): Add missing semicolon in last
change.
John Baldwin [Thu, 13 Dec 2018 19:36:42 +0000 (11:36 -0800)]
Update the FreeBSD system call table to match FreeBSD 12.0.
Add a script to generate the FreeBSD XML system call table from the
sys/sys/syscall.h file in the kernel source tree. For ABI
compatiblity system calls used by older binaries (such as
freebsd11_kevent()), the original system call name is used as an
alias.
Run this script against the current syscall.h file in FreeBSD's head
branch which is expected to be the file used in 12.0 (head is
currently in code freeze as part of the 12.0 release process).
gdb/ChangeLog:
* syscalls/update-freebsd.sh: New file.
* syscalls/freebsd.xml: Regenerate.
John Baldwin [Thu, 13 Dec 2018 19:36:42 +0000 (11:36 -0800)]
Add an optional "alias" attribute to syscall entries.
When setting a syscall catchpoint by name, catch syscalls whose name
or alias matches the requested string.
When the ABI of a system call is changed in the FreeBSD kernel, this
is implemented by leaving a compatibility system call using the old
ABI at the existing "slot" and allocating a new system call for the
version using the new ABI. For example, new fields were added to the
'struct kevent' used by the kevent() system call in FreeBSD 12. The
previous kevent() system call in FreeBSD 12 kernels is now called
freebsd11_kevent() and is still used by older binaries compiled
against the older ABI. The freebsd11_kevent() system call can be
tagged with an "alias" attribute of "kevent" permitting 'catch syscall
kevent' to catch both system calls and providing the expected user
behavior for both old and new binaries. It also provides the expected
behavior if GDB is compiled on an older host (such as a FreeBSD 11
host).
gdb/ChangeLog:
* NEWS: Add entry documenting system call aliases.
* break-catch-syscall.c (catch_syscall_split_args): Pass 'result'
to get_syscalls_by_name.
* gdbarch.sh (UNKNOWN_SYSCALL): Remove.
* gdbarch.h: Regenerate.
* syscalls/gdb-syscalls.dtd (syscall): Add alias attribute.
* xml-syscall.c [!HAVE_LIBEXPAT] (get_syscalls_by_name): Rename
from get_syscall_by_name. Now accepts a pointer to a vector of
integers and returns a bool.
[HAVE_LIBEXPAT] (struct syscall_desc): Add alias member.
(syscall_create_syscall_desc): Add alias parameter and pass it to
syscall_desc constructor.
(syscall_start_syscall): Handle alias attribute.
(syscall_attr): Add alias attribute.
(xml_get_syscalls_by_name): Rename from xml_get_syscall_number.
Now accepts a pointer to a vector of integers and returns a
bool. Add syscalls whose alias or name matches the requested
name.
(get_syscalls_by_name): Rename from get_syscall_by_name. Now
accepts a pointer to a vector of integers and returns a bool.
* xml-syscall.h (get_syscalls_by_name): Likewise.
gdb/doc/ChangeLog:
* gdb.texinfo (Set Catchpoints): Add an anchor for 'catch syscall'.
(Native): Add a FreeBSD subsection.
(FreeBSD): Document use of system call aliases for compatibility
system calls.
John Baldwin [Thu, 13 Dec 2018 19:36:42 +0000 (11:36 -0800)]
Change get_syscalls_by_group to append to an existing vector of integers.
This removes the need for the caller to explicitly manage the memory
for the returned system call list. The sole caller only needed the
system call numbers rather than the full syscall structures.
get_syscalls_by_group now uses a boolean return value to indicate if
the requested group exists.
gdb/ChangeLog:
* break-catch-syscall.c (catch_syscall_split_args): Pass 'result'
to get_syscalls_by_group.
* xml-syscall.c [!HAVE_LIBEXPAT] (get_syscalls_by_group): Return
false.
[HAVE_LIBEXPAT] (xml_list_syscalls_by_group): Append syscall
numbers to an existing vector of integers and return a bool.
(get_syscalls_by_group): Accept pointer to vector of integers
and change return type to bool.
* xml-syscall.h (get_syscalls_by_group): Likewise.
Jim Wilson [Thu, 13 Dec 2018 18:48:23 +0000 (10:48 -0800)]
RISC-V: Correct printing of MSTATUS and MISA.
* riscv-tdep.c (riscv_print_one_register_info): For MSTATUS, add
comment for SD field, and correct xlen calculation. For MISA, add
comment for MXL field, add call to register_size, and correct base
calculation.
Sam Tebbs [Thu, 13 Dec 2018 16:27:01 +0000 (16:27 +0000)]
Move aarch64 CIE code to aarch64 backend
This commit moves all aarch64-specific code to deal with CIE structure
introduced in
3a67e1a6b4430374f3073e51bb19347d4c421cfe from
target-independent files to the aarch64 backend.
2018-12-13 Sam Tebbs <sam.tebbs@arm.com>
binutils/
* dwarf.c (read_cie): Add check for 'B'.
gas/
* config/tc-aarch64.h (enum pointer_auth_key,
tc_fde_entry_extras, tc_cie_entry_extras, tc_fde_entry_init_extra,
tc_output_cie_extra, tc_cie_fde_equivalent_extra,
tc_cie_entry_init_extra): Define.
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry, select_cie_for_fde): Add tc_fde_entry_init_extra
invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra invocation.
* dw2gencfi.h (enum pointer_auth_key): Move to config/tc-aarch64.h.
(struct fde_entry): Add tc_fde_entry_extras invocation
GDB Administrator [Thu, 13 Dec 2018 00:00:36 +0000 (00:00 +0000)]
Automatic date update in version.in
Stafford Horne [Wed, 12 Dec 2018 21:06:12 +0000 (06:06 +0900)]
gdb: Update NEWS for OpenRISC Linux support
gdb/ChangeLog:
* NEWS(New targets): Add or1k*-*-linux*.
Philippe Waroquiers [Wed, 12 Dec 2018 20:14:48 +0000 (21:14 +0100)]
OBVIOUS: Forward declare linux_xfer_osdata_info_os_types on one line to fix ARI warning.
2018-12-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-osdata.c (linux_xfer_osdata_info_os_types): Forward
declare on one line to fix ARI warning.
Andrew Burgess [Mon, 26 Nov 2018 17:56:39 +0000 (17:56 +0000)]
gdb: Update test pattern to deal with native-extended-gdbserver
When running the test gdb.base/annota1.exp with:
make check-gdb RUNTESTFLAGS="--target_board=native-extended-gdbserver gdb.base/annota1.exp"
I would see a failure due to some unexpected lines in GDB's output.
The extra lines (when compared with a native run) were about file
transfer from the remote back to GDB.
This commit extends the regexp for this test to allow for these extra
lines, and also splits the rather long regexp up into a list of parts.
With this change in place I see no failures for gdb.base/annota1.exp
when using the native-extended-gdbserver target board, nor with a
native run on X86-64/Linux.
gdb/testsuite/ChangeLog:
* gdb.base/annota1.exp: Update a test regexp.
Andrew Burgess [Mon, 26 Nov 2018 12:48:05 +0000 (12:48 +0000)]
gdb/infcall: Make infcall_suspend_state into a class
I ran into a situation where attempting to make an inferior function
call would trigger an assertion, like this:
(gdb) call some_inferior_function ()
../../src/gdb/regcache.c:310: internal-error: void regcache::restore(readonly_detached_regcache*): Assertion `src != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The problem that triggers the assertion is that in the function
save_infcall_suspend_state, we basically did this:
1. Create empty infcall_suspend_state object.
2. Fill fields of infcall_suspend_state object.
The problem is causes is that if filling any of the fields triggered
an exception then the infcall_suspend_state object would be deleted
while in a partially filled in state.
In the specific case I encountered, I had a remote RISC-V target that
claimed in its target description to support floating point registers.
However, this was not true, and when GDB tried to read a floating
point register the remote sent back an error. This error would cause
an exception to be thrown while creating the
readonly_detached_regcache, which in turn caused GDB to try and delete
an infcall_suspend_state which didn't have any register state, and
this triggered the assertion.
To prevent this problem we have two possibilities, either, rewrite the
restore code the handle partially initialised infcall_suspend_state
objects, or, prevent partially initialised infcall_suspend_state
objects from existing. The second of these seems like a better
solution.
So, in this patch, I move the filling in of the different
infcall_suspend_state fields within a new constructor for
infcall_suspend_state. Now, if generating one of those fields fails
the destructor for infcall_suspend_state will not be executed and GDB
will not try to restore the partially saved state.
With this patch in place GDB now behaves like this:
(gdb) call some_inferior_function ()
Could not fetch register "ft0"; remote failure reply 'E99'
(gdb)
The inferior function call is aborted due to the error.
This has been tested against x86-64/Linux native, native-gdbserver,
and native-extended-gdbserver with no regressions. I've manually
tested this against my baddly behaving target and confirmed the
inferior function call is aborted as described above.
gdb/ChangeLog:
* infrun.c (infcall_suspend_state::infcall_suspend_state): New.
(infcall_suspend_state::registers): New.
(infcall_suspend_state::restore): New.
(infcall_suspend_state::thread_suspend): Rename to...
(infcall_suspend_state::m_thread_suspend): ...this.
(infcall_suspend_state::registers): Rename to...
(infcall_suspend_state::m_registers): ...this.
(infcall_suspend_state::siginfo_gdbarch): Rename to...
(infcall_suspend_state::m_siginfo_gdbarch): ...this.
(infcall_suspend_state::siginfo_data): Rename to...
(infcall_suspend_state::m_siginfo_data): ...this.
(save_infcall_suspend_state): Rewrite to use infcall_suspend_state
constructor.
(restore_infcall_suspend_state): Rewrite to use
infcall_suspend_state::restore method.
(get_infcall_suspend_state_regcache): Use
infcall_suspend_state::registers method.
Andrew Burgess [Tue, 4 Dec 2018 15:56:09 +0000 (15:56 +0000)]
gdb/riscv: Handle passing variadic floating point arguments
This commit fixes some test failures in gdb.base/varargs.exp when
running on targets with floating point hardware. Floating point
unnamed (variadic) arguments should be passed in integer registers
according to the abi.
After this commit I see no failures in gdb.base/varargs.exp on 32 or
64 bit targets with floating point hardware.
gdb/ChangeLog:
* riscv-tdep.c (riscv_call_arg_scalar_float): Unnamed (variadic)
arguments are passed in integer registers.
(riscv_call_arg_complex_float): Likewise.
Andre Vieira [Wed, 12 Dec 2018 13:31:46 +0000 (13:31 +0000)]
[GAS][Arm] Skip Local BLX Thumb tests for arm-netbsdelf and arm-nto
gas/ChangeLog
2018-12-12 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gas/arm/blx-local-thumb.d: Skip arm-nto and
arm-netbsdelf.
GDB Administrator [Wed, 12 Dec 2018 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Max Filippov [Fri, 7 Dec 2018 20:59:04 +0000 (12:59 -0800)]
bfd: xtensa: ignore overflow in hight part of const16 relocation
32-bit constants loaded by two const16 opcodes that involve relocation
(e.g. calculated as a sum of a symbol and a constant) may overflow,
resulting in linking error with the following message:
dangerous relocation: const16: cannot encode: (_start+0x70000000)
They should wrap around instead. Limit const16 opcode immediate field to
16 least significant bits to implement this wrap around.
bfd/
2018-12-11 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (elf_xtensa_do_reloc): Limit const16 opcode
immediate field to 16 least significant bits.
Philippe Waroquiers [Sat, 8 Dec 2018 16:28:31 +0000 (17:28 +0100)]
Fix leaks in all the linux osdata annex transfers + code factorization.
Valgrind reports leaks in all linux osdata annex transfers of linux-osdata.c.
A typical leak (this one is of gdb.base/info-os) is:
==10592== VALGRIND_GDB_ERROR_BEGIN
==10592== 65,536 bytes in 1 blocks are definitely lost in loss record 3,175 of 3,208
==10592== at 0x4C2E273: realloc (vg_replace_malloc.c:826)
==10592== by 0x409B0C: xrealloc (common-utils.c:62)
==10592== by 0x408BC3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40)
==10592== by 0x5263DF: linux_xfer_osdata_processes(unsigned char*, unsigned long, unsigned long) (linux-osdata.c:370)
==10592== by 0x520875: linux_nat_xfer_osdata (linux-nat.c:4214)
...
The leaks are created because the linux_xfer_osdata_* functions
transfer the ownership of their 'static struct buffer' memory
to their 'static char *buf' local var, but then call buffer_free
instead of xfree-ing buf.
I see no reason why the ownership of the memory has to be transferred
from a local var to another local var, so the fix consists in dropping
the 'static char *buf' and accessing the struct buffer memory where needed.
Also, because this bug was replicated in all functions, and there was
a non neglectible amount of duplicated code, the setup and usage
of the 'static struct buffer' is factorized in a new function
common_getter. The buffer for a specific annex is now a member
of the struct osdata_type instead of being a static var of each
linux_xfer_osdata_* function.
Thanks to this, all the linux_xfer_osdata_* do not have
anymore any logic related to the partial transfer of data: they now
only build the xml data in a struct buffer.
This all removes about 300 SLOC.
Note: git diff/git format-patch shows a lot of differences only due
to space changes/indentation changes.
So, git diff -w helps to look only at the relevant differences.
gdb/ChangeLog
2018-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-osdata.c (common_getter): New function.
(struct osdata_type): Change getter to take_snapshot.
Add LONGEST len_avail and struct buffer buffer.
Change all elements in the initializer.
Add an element for the list of types.
(linux_xfer_osdata_info_os_types): New function.
(linux_common_xfer_osdata): Use common_getter for the list of types.
Replace getter call by common_getter.
(linux_xfer_osdata_cpus): Remove args READBUF, OFFSET, LEN.
Add arg BUFFER. Only keep the code that adds data in BUFFER.
(linux_xfer_osdata_fds): Likewise.
(linux_xfer_osdata_modules): Likewise.
(linux_xfer_osdata_msg): Likewise.
(linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
(linux_xfer_osdata_sem): Likewise.
(linux_xfer_osdata_shm): Likewise.
(linux_xfer_osdata_isockets): Likewise.
(linux_xfer_osdata_threads): Likewise.
Philippe Waroquiers [Tue, 11 Dec 2018 21:35:19 +0000 (22:35 +0100)]
Fix the date in the ChangeLog
Philippe Waroquiers [Tue, 11 Dec 2018 21:31:57 +0000 (22:31 +0100)]
PATCH/OBVIOUS Remove various trailing spaces in linux-osdata.c
H.J. Lu [Tue, 11 Dec 2018 14:18:12 +0000 (06:18 -0800)]
Fix a typo in scripttempl/elf32xc16x.sc
* scripttempl/elf32xc16x.sc: Fix a typo.
H.J. Lu [Tue, 11 Dec 2018 14:01:46 +0000 (06:01 -0800)]
xc16x: Add elf32_xc16x_rtype_to_howto
Add elf32_xc16x_rtype_to_howto to get reloc_howto_type pointer from
ELF32_R_TYPE.
* elf32-xc16x.c (elf32_xc16x_rtype_to_howto): New function.
(elf32_xc16x_relocate_section): Call elf32_xc16x_rtype_to_howto
instead of xc16x_reloc_type_lookup to get reloc_howto_type.
Nick Clifton [Tue, 11 Dec 2018 12:01:15 +0000 (12:01 +0000)]
Fix a failure in the libiberty testsuite by increasing the recursion limit to 2048.
PR 88409
include * demangle.h (DEMANGLE_RECURSION_LIMIT): Increase to 2048.
binutils* NEWS: Note that recursion limit has increased to 2048.
* doc/binutils.texi: Likewise.
Andrew Burgess [Tue, 4 Dec 2018 11:48:42 +0000 (11:48 +0000)]
gdb/riscv: Update test to handle targets without an fpu
The FPU is optional on RISC-V. The gdb.base/float.exp test currently
assumes that an fpu is always available on RISC-V. Update the test so
that this is not the case.
gdb/testsuite/ChangeLog:
* gdb.base/float.exp: Handle RISC-V targets without an FPU.
Jim Wilson [Tue, 11 Dec 2018 00:40:46 +0000 (16:40 -0800)]
RISC-V: Don't segfault for two regs in auipc or lui.
gas/
PR gas/23954
* config/tc-riscv.c (my_getSmallExpression): Expand comment for
register support. Set expr_end if parse a register.
(riscv_ip) <'u'>: Break if imm_expr is not a symbol or constant.
* testsuite/gas/riscv/auipc-parsing.d: New.
* testsuite/gas/riscv/auipc-parsing.l: New.
* testsuite/gas/riscv/auipc-parsing.s: New.
GDB Administrator [Tue, 11 Dec 2018 00:00:36 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 10 Dec 2018 12:08:52 +0000 (04:08 -0800)]
Correct gas/ChangeLog entry for PR gas/23968
Andrew Burgess [Mon, 10 Dec 2018 10:18:46 +0000 (10:18 +0000)]
gdb/riscv: Remove whitespace before #include line
This fixes an ARI warning in riscv-tdep.c that whitespace before a
gdb/ChangeLog:
* riscv-tdep.c (riscv_register_name): Fix ARI warning by removing
leading whitespace before #include line.
GDB Administrator [Mon, 10 Dec 2018 00:00:44 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sun, 9 Dec 2018 15:22:14 +0000 (07:22 -0800)]
x86: Put back BFD_RELOC_X86_64_GOTPCREL
Put back BFD_RELOC_X86_64_GOTPCREL in TC_FORCE_RELOCATION_LOCAL, which
was removed by
commit
56ceb5b5405af23eddd12e12d8ba849010120324
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Oct 22 04:49:20 2015 -0700
Add R_X86_64_[REX_]GOTPCRELX support to gas and ld
by accident.
Philippe Waroquiers [Sun, 4 Nov 2018 19:54:05 +0000 (20:54 +0100)]
Fix tid-reuse sometimes blocks for a very long (infinite?) time.
A failure that seems to cause a long/infinite time is the following:
For a not clear reason, tid-reuse.c spawner thread sometimes gets an error:
tid-reuse: /bd/home/philippe/gdb/git/build_moreaa/gdb/testsuite/../../../moreaa/gdb/testsuite/gdb.threads/tid-reuse.c:58: spawner_thread_func: Assertion `rc == 0' failed.
which causes a SIGABRT to be trapped by gdb, and tid-reuse does not reach the
after_count breakpoint:
Thread 2 "tid-reuse" received signal SIGABRT, Aborted.
[Switching to Thread 0x7ffff7518700 (LWP 10368)]
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_count
After that, tid-reuse.exp gets the value of reuse_time, but this one kept its
initial value of -1 (as unsigned) :
print reuse_time
$1 =
4294967295
(gdb) PASS: gdb.threads/tid-reuse.exp: get reuse_time
tid-reuse then dies, and the .exp script continues (with some FAIL)
till it executes:
set timeout [expr $reuse_time * 2]
leading to the error:
(gdb) ERROR: integer value too large to represent as non-long integer
while executing
"expect {
-i exp8 -timeout
8589934590
-re ".*A problem internal to GDB has been detected" {
fail "$message (GDB internal error)"
gdb_intern..."
("uplevel" body line 1)
invoked from within
"uplevel $body" ARITH IOVERFLOW {integer value too large to represent as non-long integer} integer value too large to represent as non-long integer
ERROR: GDB process no longer exists
and then everything blocks.
This last 'GDB process no longer exists' is strange, as I still see the gdb
when this all blocks, e.g.
philippe 16058 31085 0 20:30 pts/15 00:00:00 /bin/bash -c rootme=`pwd`; export rootme; srcdir=../../../binutils-gdb/gdb/testsuite ; export srcdir ; EXPECT=`if [
philippe 16386 16058 0 20:30 pts/15 00:00:00 expect -- /usr/share/dejagnu/runtest.exp --status GDB_PARALLEL=yes --outdir=outputs/gdb.threads/tid-reuse gdb.thre
philippe 24848 16386 0 20:30 pts/20 00:00:00 /bd/home/philippe/gdb/git/build_binutils-gdb/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /bd/home/philip
This patch gives a default value of 60, so that if ever something wrong happens
in tid-reuse, then the value retrieved by the .exp script stays in a reasonable
range.
Simon verified the patch by:
"I replaced the pthread_create call with the value 1 to simulate a
failure, and the test succeeds to fail quickly with your patch applied.
Without your patch, I get the infinite hang that you describe."
Compared to V1:
As suggested by Pedro, this version checks the pthread calls return
code (in particular of pthread_create) and reports the failure reason,
instead of just aborting.
gdb/testsuite/ChangeLog
2018-12-09 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.threads/tid-reuse.c (REUSE_TIME_CAP): Declare as 60.
(reuse_time): Initialize to REUSE_TIME_CAP.
(check_rc): New function.
(main): Use REUSE_TIME_CAP instead of hardcoded 60.
Check pthread_create rc.
(spawner_thread_func): Check pthread_create and pthread_join rc.
Simon Marchi [Sun, 9 Dec 2018 00:35:47 +0000 (19:35 -0500)]
Look for tgetent in libtinfow
On some systems where ncurses is only available in the "wide" version
(compiled with --with-widec), there might be no libtinfo.so, only a
libtinfow.so. Look for libtinfow in addition to libtinfo.
gdb/ChangeLog:
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
Дилян Палаузов <dilyan.palauzov@aegee.org>
PR gdb/23950
* configure.ac: Search for tgetent in libtinfow.
* configure: Re-generate.
GDB Administrator [Sun, 9 Dec 2018 00:00:45 +0000 (00:00 +0000)]
Automatic date update in version.in
Philippe Waroquiers [Fri, 7 Dec 2018 17:13:59 +0000 (18:13 +0100)]
Fix leak by using td_ta_delete() to deregister target process and deallocate internal process handle.
Valgrind reports the below leak:
==25327== VALGRIND_GDB_ERROR_BEGIN
==25327== 672 bytes in 1 blocks are definitely lost in loss record 2,759 of 3,251
==25327== at 0x4C2E07C: calloc (vg_replace_malloc.c:752)
==25327== by 0x7FDCB3E: ???
==25327== by 0x532A7A: try_thread_db_load_1 (linux-thread-db.c:828)
==25327== by 0x532A7A: try_thread_db_load(char const*, int) (linux-thread-db.c:997)
==25327== by 0x53354D: try_thread_db_load_from_sdir (linux-thread-db.c:1074)
==25327== by 0x53354D: thread_db_load_search (linux-thread-db.c:1129)
==25327== by 0x53354D: thread_db_load() (linux-thread-db.c:1187)
==25327== by 0x611AF1: operator() (functional:2127)
==25327== by 0x611AF1: notify (observable.h:106)
==25327== by 0x611AF1: symbol_file_add_with_addrs(bfd*, char const*, enum_flags<symfile_add_flag>, std::vector<other_sections, std::allocator<other_sections> >*, enum_flags<objfile_flag>, objfile*) (symfile.c:1158)
==25327== by 0x5F5C4A: solib_read_symbols(so_list*, enum_flags<symfile_add_flag>) (solib.c:691)
==25327== by 0x5F6A8B: solib_add(char const*, int, int) (solib.c:1003)
==25327== by 0x5F6BF7: handle_solib_event() (solib.c:1281)
==25327== by 0x3D0A94: bpstat_stop_status(address_space const*, unsigned long, thread_info*, target_waitstatus const*, bpstats*) (breakpoint.c:5417)
==25327== by 0x4FF133: handle_signal_stop(execution_control_state*) (infrun.c:5874)
==25327== by 0x502C29: handle_inferior_event_1 (infrun.c:5300)
==25327== by 0x502C29: handle_inferior_event(execution_control_state*) (infrun.c:5335)
==25327== by 0x5041DB: fetch_inferior_event(void*) (infrun.c:3868)
==25327== by 0x4A1E7C: gdb_wait_for_event(int) (event-loop.c:859)
...
This leak is created because a call to td_ta_new allocates some resources
that must be freed with td_ta_delete, and that was missing.
With this patch, the nr of GDB executions leaking during regression tests
decreases further from 566 to 380.
Note that the gdbserver equivalent code is properly calling
td_ta_delete: see thread_db_mourn in thread-db.c.
Tests run natively on debian/amd64, and run under valgrind.
gdb/ChangeLog
2018-12-08 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* linux-thread-db.c (struct thread_db_info): Add td_ta_delete_p.
(thread_db_err_str): Forward declare.
(delete_thread_db_info): Call td_ta_delete_p if available.
(try_thread_db_load_1): Acquire td_ta_delete address.
* nat/gdb_thread_db.h (td_ta_delete_ftype): Declare.
Pedro Alves [Sat, 8 Dec 2018 15:03:29 +0000 (15:03 +0000)]
Merge forward-search/reverse-search, use gdb::def_vector, remove limit
Back in:
commit
85ae1317add94adef4817927e89cff80b92813dd
Author: Stan Shebs <shebs@codesourcery.com>
AuthorDate: Thu Dec 8 02:27:47 1994 +0000
* source.c: Various cosmetic changes.
(forward_search_command): Handle very long source lines correctly.
a buffer with a hard limit was converted to a heap buffer:
@@ -1228,15 +1284,26 @@ forward_search_command (regex, from_tty)
stream = fdopen (desc, FOPEN_RT);
clearerr (stream);
while (1) {
-/* FIXME!!! We walk right off the end of buf if we get a long line!!! */
- char buf[4096]; /* Should be reasonable??? */
- register char *p = buf;
+ static char *buf = NULL;
+ register char *p;
+ int cursize, newsize;
+
+ cursize = 256;
+ buf = xmalloc (cursize);
+ p = buf;
However, reverse_search_command has the exact same problem, and that
wasn't fixed. We still have that "we walk right off" comment...
Recently, the xmalloc above was replaced with a xrealloc, because as
can be seen above, that 'buf' variable above was a static local,
otherwise we'd be leaking. This commit replaces that and the
associated manual buffer growing with a gdb::def_vector<char>. I
don't think there's much point in reusing the buffer across command
invocations.
While doing this, I realized that reverse_search_command is almost
identical to forward_search_command. So this commit factors out a
common helper function instead of duplicating a lot of code.
There are some tests for "forward-search" in gdb.base/list.exp, but
since they use the "search" alias, they were a bit harder to find than
expected. That's now fixed, both by testing both variants, and by
adding some commentary. Also, there are no tests for the
"reverse-search" command, so this commit adds some for that too.
gdb/ChangeLog:
2018-12-08 Pedro Alves <palves@redhat.com>
* source.c (forward_search_command): Rename to ...
(search_command_helper): ... this. Add 'forward' parameter.
Tweak to use a gdb::def_vector<char> instead of a xrealloc'ed
buffer. Handle backward searches too.
(forward_search_command, reverse_search_command): Reimplement by
calling search_command_helper.
gdb/testsuite/ChangeLog:
2018-12-08 Pedro Alves <palves@redhat.com>
* gdb.base/list.exp (test_forward_search): Rename to ...
(test_forward_reverse_search): ... this. Also test reverse-search
and the forward-search alias.
Alan Modra [Sat, 8 Dec 2018 02:52:51 +0000 (13:22 +1030)]
[GOLD] icf_safe_so_test
PR 21128
* testsuite/icf_safe_so_test.sh (check_fold): Rewrite to check
multiple symbols at once.
(arch_specific_safe_fold): Likewise, and call with the four foo*
symbols expected to fold.
Alan Modra [Sat, 8 Dec 2018 01:19:20 +0000 (11:49 +1030)]
Fix strings.c endian issue and strings test
git commit
71f5e3f7b624 obviously wasn't tested on a big-endian host,
and the test fail message resulted in tcl errors.
* strings.c (unget_part_char): New function.
(print_strings): Use unget_part_char. Formatting.
* testsuite/binutils-all/strings.exp (test_multibyte): Don't
use square brackets in fail message. Expect "String1\nString2".
GDB Administrator [Sat, 8 Dec 2018 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 7 Dec 2018 23:39:49 +0000 (15:39 -0800)]
Override the previous definition from IR object
Mark the previous definition from IR object as undefined so that the
generic linker will override it.
bfd/
PR ld/23958
* elflink.c (_bfd_elf_add_default_symbol): Override the previous
definition from IR object.
ld/
PR ld/23958
* testsuite/ld-plugin/lto.exp: Run PR ld/23958 test.
* testsuite/ld-plugin/pr23958.c: New file.
* testsuite/ld-plugin/pr23958.t: Likewise.
Andrew Burgess [Fri, 7 Dec 2018 10:45:01 +0000 (10:45 +0000)]
gdb/emacs/dir-locals: Update settings for c++-mode
The current .dir-locals file for GDB causes files that would usually
open in c-mode (for example, files ending in .c) to open in c++-mode.
However, all of the other settings applied for c-mode appear to get
reset when the file is switched over to c++-mode.
For example, we currently say:
(c-mode . ((c-file-style . "GNU")
(mode . c++)
(indent-tabs-mode . t)
(tab-width . 8)
(c-basic-offset . 2)
(eval . (c-set-offset 'innamespace 0))
))
(c++-mode . ((eval . (when (fboundp 'c-toggle-comment-style)
(c-toggle-comment-style 1)))))
So, when we enter c++-mode `indent-tabs-mode` is reset to its global
value, as are all of the other settings listed for c-mode.
This commit copies all of the settings (except the `mode` setting)
from the c-mode list to the c++-mode list.
The emacs documentation doesn't mention that `mode` causes this
resetting behaviour, so, in case this is an emacs bug, I'm using emacs
version 26.1. Having the settings duplicated shouldn't cause any
problems except for a slight maintenance overhead.
gdb/ChangeLog:
* .dir-locals.el: Copy most of the settings from c-mode over to
c++-mode.
Stafford Horne [Fri, 7 Dec 2018 22:01:40 +0000 (07:01 +0900)]
gdb/or1k: Add linux debugging support
Up until now OpenRISC GDB only has supported bare metal debugging. This
patch adds linux userspace debugging and core dump analysis support.
The changes are loosely based on nios2 and riscv implementations.
This was tested with linux 4.20 core dumps for executables linked
against musl libc.
bfd/ChangeLog:
* elf32-or1k.c (or1k_grok_prstatus): New function.
(or1k_grok_psinfo): Likewise.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add or1k-linux-tdep.o.
* configure.tgt: Add or1k*-*-linux*.
* or1k-linux-tdep.c: New file.
* or1k-tdep.c (or1k_gdbarch_init): Call gdbarch_init_osabi.
Jim Wilson [Fri, 7 Dec 2018 20:31:05 +0000 (12:31 -0800)]
RISC-V: Fix 4-arg add parsing.
PR gas/23956
gas/
* config/tc-riscv.c (validate_riscv_insn) <'1'>: New case.
(percent_op_null): New.
(riscv_ip) <'j'>: Set imm_reloc before p.
<'1'>: New case.
<'0'>: Use percent_op_null and don't set imm_reloc.
<alu_op>: Handle *args == '1'.
* testsuite/gas/riscv/tprel-add.d: New.
* testsuite/gas/riscv/tprel-add.l: New.
* testsuite/gas/riscv/tprel-add.s: New.
opcodes/
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
Pedro Alves [Fri, 7 Dec 2018 19:54:19 +0000 (19:54 +0000)]
Fix gdb build on 32-bit hosts w/ --enable-64-bit-bfd
Building for x86_64/-m32 with --enable-64-bit-bfd, compilation fails
with:
src/gdb/dwarf2read.c: In instantiation of ‘gdb::array_view<const unsigned char> get_gdb_index_contents_from_section(objfile*, T*) [with T = dwarf2_per_objfile]’:
src/gdb/dwarf2read.c:6266:54: required from here
src/gdb/dwarf2read.c:6192:37: error: narrowing conversion of ‘section->dwarf2_section_info::size’ from ‘bfd_size_type {aka long long unsigned int}’ to ‘size_t {aka unsigned int}’ inside { } [-Werror=narrowing]
return {section->buffer, section->size};
~~~~~~~~~^~~~
This fixes it.
gdb/ChangeLog:
2018-12-07 Pedro Alves <palves@redhat.com>
* dwarf2read.c (get_gdb_index_contents_from_section): Use
gdb::make_array_view.
H.J. Lu [Fri, 7 Dec 2018 16:30:30 +0000 (08:30 -0800)]
elf: Report property change when merging properties
With merging properties, report property change in linker map file, like
Merging program properties
Removed property 0xc0010000 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (0x0) and /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crti.o (0x0)
Removed property 0xc0000002 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (0x3) and x.o (not found)
Removed property 0xc0000000 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (not found) and /usr/lib64/libc_nonshared.a(elf-init.oS) (0x0)
Removed property 0xc0000001 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (not found) and /usr/lib64/libc_nonshared.a(elf-init.oS) (0x0)
bfd/
* elf-properties.c (elf_find_and_remove_property): Add a
bfd_boolean argument to indicate if the property should be
removed.
(elf_merge_gnu_property_list): Updated. Report
property change in linker map file.
(elf_get_gnu_property_section_size): Skip property_remove
properties.
(elf_write_gnu_properties): Likewise.
(_bfd_elf_link_setup_gnu_properties): Report property merge
in linker map file. Pass abfd to elf_merge_gnu_property_list.
include/
* bfdlink.h (bfd_link_info): Add has_map_file.
ld/
* NEWS: Updated for property change report.
* ld.texi: Document property change report.
* ldmain.c (main): Set link_info.has_map_file to TRUE when
linker map file is used.
* testsuite/ld-scripts/rgn-over1.d: Updated.
* testsuite/ld-scripts/rgn-over2.d: Likewise.
* testsuite/ld-scripts/rgn-over3.d: Likewise.
* testsuite/ld-scripts/rgn-over4.d: Likewise.
* testsuite/ld-scripts/rgn-over5.d: Likewise.
* testsuite/ld-scripts/rgn-over6.d: Likewise.
* testsuite/ld-scripts/rgn-over7.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Check linker map
file.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.map: New file.
Philippe Waroquiers [Tue, 4 Dec 2018 22:28:14 +0000 (23:28 +0100)]
Fix a (one shot small) leak in language.c
Valgrind detects the following leak:
==28395== VALGRIND_GDB_ERROR_BEGIN
==28395== 5 bytes in 1 blocks are definitely lost in loss record 20 of 2,770
==28395== at 0x4C2BE2D: malloc (vg_replace_malloc.c:299)
==28395== by 0x41D9E7: xmalloc (common-utils.c:44)
==28395== by 0x78BF39: xstrdup (xstrdup.c:34)
==28395== by 0x51F1AC: _initialize_language() (language.c:1175)
==28395== by 0x6B3356: initialize_all_files() (init.c:308)
==28395== by 0x66D194: gdb_init(char*) (top.c:2159)
==28395== by 0x554C11: captured_main_1 (main.c:863)
==28395== by 0x554C11: captured_main (main.c:1167)
==28395== by 0x554C11: gdb_main(captured_main_args*) (main.c:1193)
==28395== by 0x29D837: main (gdb.c:32)
==28395==
==28395== VALGRIND_GDB_ERROR_END
This is a very small leak (1 block/5 bytes), happening only once
per GDB startup as far as I can see. But this fix make the nr of leaking
GDB in the testsuite decreasing from 628 to 566.
It is unclear why a xstrdup-ed value is assigned to 'language'
at initialization time, while a static "auto" string is assigned
as part of the set_language_command.
So, that shows that it is ok to initialize 'language' directly
with "auto".
Also, I cannot find any place where 'language' is xfree-d.
No leak was detected for 'range' and 'case_sensitive', but
similarly, no indication why a static string cannot be assigned.
Regression-tested on debian/x86_64.
Also, full testsuite run under valgrind, less tests leaking,
and no dangling pointer problem detected.
gdb/ChangeLog
2018-12-05 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* language.c (_initialize_language): Fix leak by assigning
a static string to language. Same for range and case_sensitive,
even if no leak is detected for these variables.
Alan Modra [Fri, 7 Dec 2018 13:09:42 +0000 (23:39 +1030)]
PR23952, memory leak in _bfd_generic_read_minisymbols
bfd/
PR 23952
* syms.c (_bfd_generic_read_minisymbols): Free syms before
returning with zero symcount.
binutils/
* nm.c (display_rel_file): Use xrealloc to increase minisyms
for synthetic symbols.
Nick Clifton [Fri, 7 Dec 2018 11:32:55 +0000 (11:32 +0000)]
Synchronize libiberty with gcc and add --no-recruse-limit option to tools that support name demangling.
This patch addresses the multitude of bug reports about resource exhaustion
in libiberty's name demangling code. It adds a limit to the amount of
recursion that is allowed, before an error is triggered. It also adds a
new demangling option to disable this limit. (The limit is enabled by
default).
PR 87681
PR 87675
PR 87636
PR 87335
libiberty * cp-demangle.h (struct d_info): Add recursion_limit field.
* cp-demangle.c (d_function_type): If the recursion limit is
enabled and reached, return with a failure result.
(d_demangle_callback): If the recursion limit is enabled, check
for a mangled string that is so long that there is not enough
stack space for the local arrays.
* cplus-dem.c (struct work): Add recursion_level field.
(demangle_nested_args): If the recursion limit is enabled and
reached, return with a failure result.
include * demangle.h (DMGL_RECURSE_LIMIT): Define.
(DEMANGLE_RECURSION_LIMIT): Prototype.
binutuils * addr2line.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(translate_address): Pass demangle_flags to bfd_demangle.
(main): Handle --recurse-limit and --no-recurse-limit options.
* cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags
passed to cplus_demangle.
* nm.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* objdump.c (demangle_flags): New static variable.
(usage): Add --recurse-limit and --no-recurse-limit.
(long_options): Likewise.
(objdump_print_symname): Pass demangle_flags to bfd_demangle.
(disassemble_section): Likewise.
(dump_dymbols): Likewise.
(main): Handle new options.
* prdbg.c (demangle_flags): New static variable.
(tg_variable): Pass demangle_flags to demangler.
(tg_start_function): Likewise.
* stabs.c (demangle_flags): New static variable.
(stab_demangle_template): Pass demangle_flags to demangler.
(stab_demangle_v3_argtypes): Likewise.
(stab_demangle_v3_arg): Likewise.
* doc/binutuls.texi: Document new command line options.
* NEWS: Mention the new feature.
* testsuite/config/default.exp (CXXFILT): Define if not already
defined.
(CXXFILTFLAGS): Likewise.
* testsuite/binutils-all/cxxfilt.exp: New file. Runs a few
simple tests of the cxxfilt program.
GDB Administrator [Fri, 7 Dec 2018 00:00:46 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Thu, 6 Dec 2018 20:28:46 +0000 (12:28 -0800)]
gold: Provide more failed archive member info in error message
When gold fails to get an archive member, its error message doesn't
have information for
1. The failed archive member name.
2. The cause of failure: non-ELF object vs non-IR object.
This patch adds the failed archive member name and non-ELF/non-IR info
to gold error message.
* archive.cc (Archive::get_elf_object_for_member): Also print
archive member and non-ELF/non-IR info on error.
Alan Modra [Thu, 6 Dec 2018 10:21:27 +0000 (20:51 +1030)]
PowerPC @l, @h and @ha warnings, plus VLE e_li
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
Andrew Burgess [Tue, 16 Oct 2018 09:49:15 +0000 (10:49 +0100)]
sim/cris: Fix references to cgen cpu directory
Don't assume that cgen is located within the binutils-gdb tree. We
already have CGEN_CPU_DIR and CPU_DIR defined, these are the cpu/
directory within cgen, and the cpu/ directory within binutils-cpu.
The cris target tries to find CPU_DIR relative to the cgen source
tree, which can be wrong when building with an out of tree cgen.
sim/cris/ChangeLog:
* Makefile.in: Replace uses of CGEN_CPU_DIR with CPU_DIR, and
remove the definition of CGEN_CPU_DIR.
Andrew Burgess [Wed, 10 Oct 2018 13:58:10 +0000 (14:58 +0100)]
sim/opcodes: Allow use of out of tree cgen source directory
When configuring with '--enbale-cgen-maint' the default for both the
opcodes/ and sim/ directories is to assume that the cgen source is
within the binutils-gdb source tree as binutils-gdb/cgen/.
In the old cvs days, this worked well, as cgen was just another
sub-module of the single cvs repository and could easily be checked
out within the binutils-gdb directory, and managed by cvs in the
normal way.
Now that binutils-gdb is in git, while cgen is still in cvs, placing
the cgen respository within the binutils-gdb tree is more troublesome,
and it would be nice if the two tools could be kept separate.
Luckily there is already some initial code in the configure.ac files
for both opcodes/ and sim/ to support having cgen be located outside
of the binutils-gdb tree, however, this was speculative code written
imagining a future where cgen would be built and installed to some
location.
Right now there is no install support for cgen, and so the configure
code in opcodes/ and sim/ doesn't really do anything useful. In this
commit I repurpose this code to allow binutils-gdb to be configured so
that it can make use of a cgen source directory that is outside of the
binutils-gdb tree.
With this commit applied it is now possible to configure and build
binutils-gdb like this:
/path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/
make all-opcodes
make -C opcodes run-cgen-all
Just in case anyone is still using cgen inside the binutils-gdb tree,
I have left the default behaviour of '--enable-cgen-maint' (with no
parameter) unchanged, that is it looks for the cgen directory as
'binutils-gdb/cgen/'.
opcodes/ChangeLog:
* configure.ac (enable-cgen-maint): Support passing path to cgen
source tree.
* configure: Regenerate.
sim/ChangeLog:
* common/acinclude.m4 (enable-cgen-maint): Support passing path to
cgen source tree.
* cris/configure: Regenerate.
* frv/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32r/configure: Regenerate.
* or1k/configure: Regenerate.
* sh64/configure: Regenerate.
Andrew Burgess [Mon, 3 Dec 2018 14:46:18 +0000 (14:46 +0000)]
opcodes/riscv: Hide '.L0 ' fake symbols
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28:
feb43023 sd a1,-32(s0)
2c:
fcc43c23 sd a2,-40(s0)
30:
fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34:
fec42783 lw a5,-20(s0)
38:
0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e:
03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42:
02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46:
000007b7 lui a5,0x0
4a:
0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56:
000007b7 lui a5,0x0
5a:
00078513 mv a0,a5
5e:
00000097 auipc ra,0x0
62:
000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a:
000007b7 lui a5,0x0
6e:
00078513 mv a0,a5
72:
00000097 auipc ra,0x0
76:
000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28:
feb43023 sd a1,-32(s0)
2c:
fcc43c23 sd a2,-40(s0)
30:
fef42623 sw a5,-20(s0)
34:
fec42783 lw a5,-20(s0)
38:
0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e:
03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42:
02f71463 bne a4,a5,6a <.L4>
46:
000007b7 lui a5,0x0
4a:
0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56:
000007b7 lui a5,0x0
5a:
00078513 mv a0,a5
5e:
00000097 auipc ra,0x0
62:
000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a:
000007b7 lui a5,0x0
6e:
00078513 mv a0,a5
72:
00000097 auipc ra,0x0
76:
000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
GDB Administrator [Thu, 6 Dec 2018 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
John Baldwin [Wed, 5 Dec 2018 18:51:16 +0000 (10:51 -0800)]
Use separate sed expressions to escape auto-load directories.
Not all sed implementations support alternation via \| in the default
regular expressions. Instead, resort to separate sed expressions via
-e for $debugdir and $datadir. This fixes the default setting of the
auto-load directories on FreeBSD. Previously on FreeBSD the sed
invocation was a no-op causing the debugdir and datadir values to be
expanded yielding an autoload path of ':${prefix}/share/gdb'.
gdb/ChangeLog:
* configure: Re-generate.
* configure.ac: Use separate sed expressions to escape variables
in auto-load directories.
Sam Tebbs [Wed, 5 Dec 2018 18:27:23 +0000 (18:27 +0000)]
[aarch64] Add support for pointer authentication B key
Armv8.3-A has another key used in pointer authentication called the
B-key (other than the A-key that is already supported). In order for
stack unwinders to work it is necessary to be able to identify frames
that have been signed with the B-key rather than the A-key and it was
felt that keeping this as an augmentation character in the CIE was the
best bet. The DWARF extensions for ARM therefore propose to add a new
augmentation character 'B' to the CIE augmentation string and the
corresponding cfi directive ".cfi_b_key_frame". I've made the relevant
changes to GAS and LD to add support for B-key unwinding, which required
modifying LD to check for 'B' in the augmentation string, adding the
".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to
GAS's fde_entry and cie_entry structs.
The pointer authentication instructions will behave as NOPs on
architectures that don't support them, and so a check for the
architecture being assembled for is not necessary since there will be no
behavioural difference between augmentation strings with and without the
'B' character on such architectures.
2018-12-05 Sam Tebbs <sam.tebbs@arm.com>
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'.
gas/
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry): Add tc_fde_entry_init_extra invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra and
tc_cie_entry_init_extra invocation.
(frch_cfi_data, cfa_save_data): Move to dwgencfi.h.
* config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare.
(md_pseudo_table): Add "cfi_b_key_frame".
* config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras,
tc_fde_entry_init_extra, tc_output_cie_extra,
tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define.
* dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation.
(pointer_auth_key): Define.
(frch_cfi_data, cfa_save_data): Move from dwgencfi.c.
* doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation.
* testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
Andrew Burgess [Mon, 3 Dec 2018 17:48:49 +0000 (17:48 +0000)]
gdb/riscv: Improve logic for when h/w float abi should be used
Currently, if the target announces that it has floating point
registers in its target description then GDB assumes that the hardware
float ABI should be used. However, there's nothing stopping a user
compiling a program for the soft-float abi, and then trying to run
this on a target with hardware floating point registers.
This commit adjusts the logic that decides if GDB should use the
hardware float abi. The primary decision now is based on what the ELF
currently being executed says in its headers. If the file was
compiled for h/w float abi, then GDB uses h/w float abi, otherwise s/w
float is used.
If the current BFD is not an ELF then we don't currently have a
mechanism for figuring out if the file was compiled for float or not.
In this case we disable the h/w float abi. This shouldn't be a
problem as, right now, the RISC-V linker can only produce ELFs.
If there is NO current BFD (can this happen?) then we will enable h/w
float abi if the target has floating point hardware, otherwise, s/w
float abi is used.
This commit also adds some sanity checking that the features requested
in the BFD (xlen and flen) match the target description.
For testing I ran the testsuite on a target that returns a target
description containing both integer and floating point registers, but
used a compiler that didn't have floating point support. Before this
commit I would see failures on may tests that made inferior calls
using floating point arguments, after this commit, all of these issues
are resolved. One example from the testsuite is
gdb.base/infcall-nested-structs.exp.
gdb/ChangeLog:
* riscv-tdep.c (riscv_features_from_gdbarch_info): New function.
(riscv_find_default_target_description): Use new function to
extract feature from gdbarch_info.
(riscv_gdbarch_init): Add error checks for xlen and flen between
target description and bfd headers. Be smarter about when we
think the hardware floating point abi should be used.
Andrew Burgess [Tue, 4 Dec 2018 11:29:47 +0000 (11:29 +0000)]
gdb/testsuite/sim: Remove redundant setting of timeout
In the config/sim.exp file two functions are defined. Both of these
functions define local timeout variables and then call gdb_expect,
which (through a call to get_largest_timeout) will find the local
definition of timeout.
However, both of these functions set the local timeout to some
arbitrary value and print a log message for this "new" timeout just
before returning.
As in both cases, the timeout is a local variable, this final setting
of the timeout has no effect and can be removed.
As having log messages about the timeout being adjusted could cause
confusion I've removed all logging related to timeouts in this
function, timeouts are adjusted throughout the testsuite without any
logging, there doesn't seem to be any good reason why these functions
should get their own logging.
With the logging gone there seems to be little need to a local timeout
variable at all, and so I've folded the local timeout directly into
the call to gdb_expect.
gdb/testsuite/ChangeLog:
* config/sim.exp (gdb_target_sim): Remove redundant adjustment of
local timeout variable before return, and remove all local timeout
variable entirely.
(gdb_load): Likewise.
Alan Hayward [Wed, 5 Dec 2018 10:34:54 +0000 (10:34 +0000)]
AArch64: Racy: Don't set empty set of hardware BPs/WPs on new thread
On some heavily loaded AArch64 boxes, GDB will sometimes hang forever when
the inferior creates a thread. This hang happens inside the kernel during
the ptrace call to set hardware watchpoints or hardware breakpoints.
Currently, GDB will always set hw wp/bp at the start of each thread even if
there are none set in the process.
This patch works around the issue by avoiding setting hw wp/bp if there
are none set for the process.
On an effected machine, this fix drastically reduces the racy nature of the
gdb.threads test set. I ran the entire gdb test suite across all processors
for 100 iterations, then ran the results through the racy tests script.
Without the patch, 58 .exp files in gdb.threads were marked as racy. After
the patch this reduced to the same ~14 tests as the non effected boxes.
Clearly GDB will still be subject to hangs on an effect box if hw wp/bp's are
used prior to creating inferior threads on a heavily loaded system.
To enable this in gdbserver, the sequence in gdbserver add_lwp() is switched
to the same as gdb order as gdb, to ensure the thread is registered before
calling new_thread(). This allows aarch64_linux_new_thread() to read the
ptid.
gdb/ChangeLog:
* nat/aarch64-linux-hw-point.c
(aarch64_linux_any_set_debug_regs_state): New function.
* nat/aarch64-linux-hw-point.h
(aarch64_linux_any_set_debug_regs_state): New declaration.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Check if any
BPs or WPs are set.
gdb/gdbserver/ChangeLog:
* linux-low.c (add_lwp): Switch ordering.
Alan Modra [Wed, 5 Dec 2018 01:49:34 +0000 (12:19 +1030)]
gold won't build with gcc-9
* symtab.h (Symbol::Symbol): Avoid -Wclass-memaccess warning.
GDB Administrator [Wed, 5 Dec 2018 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 4 Dec 2018 14:00:57 +0000 (06:00 -0800)]
x86: Don't remove empty GNU_PROPERTY_X86_UINT32_OR_AND properties
For GNU_PROPERTY_X86_COMPAT_ISA_1_USED and GNU_PROPERTY_X86_UINT32_OR_AND
properties, a bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields and this property is present in all
relocatable input files. A missing property implies that its bits have
unknown values. When all bits in the the output pr_data field are zero,
this property should not be removed from output to indicate it has zero
in all bits.
bfd/
PR ld/23372
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Don't remove
empty properties for GNU_PROPERTY_X86_COMPAT_ISA_1_USED and
GNU_PROPERTY_X86_UINT32_OR_AND.
(_bfd_x86_elf_link_fixup_gnu_properties): Likewise.
ld/
PR ld/23372
* testsuite/ld-i386/pr23372a.d: Updated.
* testsuite/ld-i386/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
Alexey Neyman [Tue, 4 Dec 2018 07:50:48 +0000 (23:50 -0800)]
Restore build on x86_64-w64-mingw32.
gold/
PR gold/23594
* configure.ac: Add checks for link, mkdtemp.
* configure: Regenerate.
* config.in: Regenerate.
* plugin.cc (Plugin_recorder::init): Fall back to mktemp
if mkdtemp is not available.
(link_or_copy_file): Fall back to copy if link() is not available.
wu.heng [Mon, 3 Dec 2018 02:02:13 +0000 (12:32 +1030)]
PR23939, Check frch_cfi_data before use
PR 23939
* dw2gencfi.c (dot_cfi_label): Check frch_cfi_data is non-NULL
before use.
GDB Administrator [Tue, 4 Dec 2018 00:00:27 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Mon, 3 Dec 2018 21:59:44 +0000 (13:59 -0800)]
RISC-V: Accept version, supervisor ext and more than one NSE for -march.
This patch moves all -march parsing logic into bfd, because we will use this
code in ELF attributes.
bfd/
* elfxx-riscv.h (RISCV_DONT_CARE_VERSION): New macro.
(struct riscv_subset_t): New structure.
(riscv_subset_t): New typedef.
(riscv_subset_list_t): New structure.
(riscv_release_subset_list): New prototype.
(riscv_add_subset): Likewise.
(riscv_lookup_subset): Likewise.
(riscv_lookup_subset_version): Likewise.
(riscv_release_subset_list): Likewise.
* elfxx-riscv.c: Include safe-ctype.h.
(riscv_parsing_subset_version): New function.
(riscv_supported_std_ext): Likewise.
(riscv_parse_std_ext): Likewise.
(riscv_parse_sv_or_non_std_ext): Likewise.
(riscv_parse_subset): Likewise.
(riscv_add_subset): Likewise.
(riscv_lookup_subset): Likewise.
(riscv_lookup_subset_version): Likewise.
(riscv_release_subset_list): Likewise.
gas/
* config/tc-riscv.c: Include elfxx-riscv.h.
(struct riscv_subset): Removed.
(riscv_subsets): Change type to riscv_subset_list_t.
(riscv_subset_supports): Removed argument: xlen_required and move
logic into libbfd.
(riscv_multi_subset_supports): Removed argument: xlen_required.
(riscv_clear_subsets): Removed.
(riscv_add_subset): Ditto.
(riscv_set_arch): Extract parsing logic into libbfd.
(riscv_ip): Update argument for riscv_multi_subset_supports and
riscv_subset_supports. Update riscv_subsets due to struct definition
changed.
(riscv_after_parse_args): Update riscv_subsets due to struct
definition changed, update and argument for riscv_subset_supports.
* testsuite/gas/riscv/empty.s: New.
* testsuite/gas/riscv/march-fail-rv32ef.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32i.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32i.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32iam.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32iam.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32ic.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32ic.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32icx2p.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32icx2p.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32imc.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32imc.l: Likewise.
* testsuite/gas/riscv/march-fail-rv64I.d: Likewise.
* testsuite/gas/riscv/march-fail-rv64I.l: Likewise.
* testsuite/gas/riscv/march-fail-rv64e.d: Likewise.
* testsuite/gas/riscv/march-fail-rv64e.l: Likewise.
* testsuite/gas/riscv/march-ok-g2.d: Likewise.
* testsuite/gas/riscv/march-ok-g2p0.d: Likewise.
* testsuite/gas/riscv/march-ok-i2p0.d: Likewise.
* testsuite/gas/riscv/march-ok-nse-with-version.: Likewise.d
* testsuite/gas/riscv/march-ok-s-with-version.d: Likewise.
* testsuite/gas/riscv/march-ok-s.d: Likewise.
* testsuite/gas/riscv/march-ok-sx.d: Likewise.
* testsuite/gas/riscv/march-ok-two-nse.d: Likewise.
* testsuite/gas/riscv/march-ok-g2_p1.d: Likewise.
* testsuite/gas/riscv/march-ok-i2p0m2_a2f2.d: Likewise.
include/
* opcode/riscv.h (riscv_opcode): Change type of xlen_requirement to
unsigned.
opcodes/
* riscv-opc.c: Change the type of xlen, because type of
xlen_requirement changed.
Egeyar Bagcioglu [Mon, 3 Dec 2018 17:31:44 +0000 (17:31 +0000)]
[aarch64] - Only use MOV for disassembly when shifter op is LSL #0
ARM Architecture Reference Manual for the profile ARMv8-A, Issue C.a,
states that MOV (register) is an alias of the ORR (shifted register)
iff shift == '00' && imm6 == '000000' && Rn == '11111'. However, mov
is currently preferred for a broader range of orr instructions, which
is incorrect.
2018-12-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
opcodes:
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
gas:
PR 23193
PR 19721
* testsuite/gas/aarch64/pr19721.s: Add new test cases.
* testsuite/gas/aarch64/pr19721.d: Correct existing test
cases and add new ones.
Nick Clifton [Mon, 3 Dec 2018 17:26:41 +0000 (17:26 +0000)]
Update the assembler to use a version of 3 when generating the header of the .debug_line section.
PR 23941
gas * dwarf2dbg.c (DWARF2_LINE_VERSION): Change to 3.
* testsuite/gas/elf/dwarf2-3.d: Update expected output.
* testsuite/gas/elf/dwarf2-5.d: Likewise.
* testsuite/gas/i386/debug1.d: Likewise.
* testsuite/gas/i386/dw2-compress-1.d: Likewise.
* testsuite/gas/i386/dw2-compress-3a.d: Likewise.
* testsuite/gas/i386/dw2-compress-3b.d: Likewise.
* testsuite/gas/i386/dw2-compressed-1.d: Likewise.
* testsuite/gas/i386/dw2-compressed-3a.d: Likewise.
* testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
* testsuite/gas/ia64/pr13167.d: Likewise.
* testsuite/gas/mips/loc-swap-2.d: Likewise.
* testsuite/gas/mips/loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-2.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap-2.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16e@loc-swap.d: Likewise.
binutils* testsuite/binutils-all/i386/compressed-1a.d: Update expected output.
* testsuite/binutils-all/x86-64/compressed-1a.d: Likewise.
GDB Administrator [Mon, 3 Dec 2018 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sun, 2 Dec 2018 13:42:36 +0000 (05:42 -0800)]
gold: Get alignment of uncompressed section from ch_addralign
The ELF compression header has a field (ch_addralign) that is set to
the alignment of the uncompressed section. This way the section itself
can have a different alignment than the decompressed section. Update
decompress_input_section to get alignment of the decompressed section
and use it when merging decompressed strings.
PR binutils/23919
* merge.cc (Output_merge_string<Char_type>::do_add_input_section):
Get addralign from decompressed_section_contents.
* object.cc (build_compressed_section_map): Set info.addralign.
(Object::decompressed_section_contents): Add a palign
argument and store p->second.addralign in *palign if it isn't
NULL.
* object.h (Compressed_section_info): Add addralign.
(section_is_compressed): Add a palign argument, default it
to NULL, store p->second.addralign in *palign if it isn't NULL.
(Object::decompressed_section_contents): Likewise.
* output.cc (Output_section::add_input_section): Get addralign
from section_is_compressed.
GDB Administrator [Sun, 2 Dec 2018 00:01:21 +0000 (00:01 +0000)]
Automatic date update in version.in
H.J. Lu [Sat, 1 Dec 2018 13:42:33 +0000 (05:42 -0800)]
x86: Delay setting the iplt section alignment
Delay setting its alignment until we know it is non-empty. Otherwise an
empty iplt section may change vma and lma of the following sections, which
triggers moving dot of the following section backwards, resulting in a
warning and section lma not being set properly. It later leads to a
"File truncated" error.
bfd/
PR ld/23930
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Update
the iplt section alignment if it is non-empty.
(_bfd_x86_elf_link_setup_gnu_properties): Set plt.iplt_alignment
and delay setting the iplt section alignment.
* elfxx-x86.h (elf_x86_plt_layout): Add iplt_alignment.
ld/
PR ld/23930
* testsuite/ld-i386/i386.exp: Run pr23930.
* testsuite/ld-i386/pr23930.d: New file.
* testsuite/ld-x86-64/pr23930-32.t: Likewise.
* testsuite/ld-x86-64/pr23930-x32.d: Likewise.
* testsuite/ld-x86-64/pr23930.d: Likewise.
* testsuite/ld-x86-64/pr23930.t: Likewise.
* testsuite/ld-x86-64/pr23930a.s: Likewise.
* testsuite/ld-x86-64/pr23930b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr23930 and pr23930-x32.
Alan Modra [Sat, 1 Dec 2018 11:22:37 +0000 (21:52 +1030)]
PR23946, illegal memory access in readelf.c:slurp_ia64_unwind_table
PR 23946
* readelf.c (slurp_ia64_unwind_table): Bounds check symbol index
on reloc.
(slurp_hppa_unwind_table): Likewise.
Alan Modra [Sat, 1 Dec 2018 10:45:03 +0000 (21:15 +1030)]
PR23945, NULL pointer dereference in readelf.c:slurp_hppa_unwind_table
PR 23945
* readelf.c (slurp_ia64_unwind_table): Don't call elf_ia64_reloc_type
needlessly.
(slurp_hppa_unwind_table): Use same range checks and error messages
as slurp_ia64_unwind_table.
Tom de Vries [Sat, 1 Dec 2018 07:56:56 +0000 (08:56 +0100)]
[gdb/testsuite] Add gdb-caching-proc.exp testcase
When caching a proc using gdb_caching_proc, it will become less likely to
be executed, and consequently it's going to be harder to detect that the
proc is racy. OTOH, in general the proc is easy to rerun. So, add a
test-case to run all uncached gdb_caching_procs a number of times and detect
inconsistent results.
The purpose of caching is to reduce runtime, so rerunning is somewhat
counter-productive in that aspect, but it's better than uncached, because the
number of reruns is constant-bounded, and the increase in runtime is bound to
this test-case, and can be disabled on slow targets.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2018-12-01 Tom de Vries <tdevries@suse.de>
* gdb.base/gdb-caching-proc.exp: New file.
Alan Modra [Fri, 30 Nov 2018 23:07:48 +0000 (09:37 +1030)]
PR23938, should not free memory alloced in obstack by free()
This removes ineffectual and wrong code caching section names in
gas/stabs.c. Code like
seg = subseg_new (name, 0);
...
if (seg->name == name)
seg->name = xstrdup (name);
with the idea of being able to unconditionally free "name" later no
longer works. "name" is referenced by the section hash table as well
as in the section->name field. It would be possible to use
"bfd_rename_section (stdoutput, seg, xstrdup (name))", but instead I
opted for a fairly straight-forward approach of adding extra
parameters to two functions to indicate section name strings should be
freed if possible.
PR 23938
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (get_stab_string_offset): Add free_stabstr_secname
parameter. Free stabstr_secname if unused as section name.
Don't xstrdup name when used.
(s_stab_generic): Remove forward declaration. Add
stab_secname_obstack_end param. Reference notes obstack via
macros. Delete cached_secname. Adjust get_stab_string_offset
call. Free stab_secname if unused as section name.
(s_stab): Adjust s_stab_generic call.
(s_xstab): Likewise. Delete saved_secname and saved_strsecname.
* config/obj-elf.c (obj_elf_init_stab_section): Adjust
get_stab_string_offset call.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* testsuite/gas/all/pr23938.s: New test.
* testsuite/gas/all/gas.exp: Run it.
GDB Administrator [Sat, 1 Dec 2018 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
John Baldwin [Fri, 30 Nov 2018 23:14:18 +0000 (15:14 -0800)]
Use kinfo_getfile to implement fdwalk on FreeBSD.
kinfo_getfile() requires a couple of system calls to fetch the list of
open file descriptors. This can be much cheaper than invoking fstat
on all of the values from 0 to the open file resource limit maximum.
gdb/ChangeLog:
* common/filestuff.c [HAVE_KINFO_GETFILE]: Include headers.
(fdwalk) [HAVE_KINFO_GETFILE]: Use kinfo_getfile.
Simon Marchi [Fri, 30 Nov 2018 21:49:35 +0000 (16:49 -0500)]
Fix leak in linespec parser
Valgrind reports this leak:
==798== VALGRIND_GDB_ERROR_BEGIN
==798== 32 (24 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 447 of 3,143
==798== at 0x4C2C48C: operator new(unsigned long) (vg_replace_malloc.c:334)
==798== by 0x51D401: linespec_parser_new(ls_parser*, int, language_defn const*, program_space*, symtab*, int, linespec_result*) (linespec.c:2756)
==798== by 0x524BF7: decode_line_full(event_location const*, int, program_space*, symtab*, int, linespec_result*, char const*, char const*) (linespec.c:3271)
==798== by 0x3E8893: parse_breakpoint_sals(event_location const*, linespec_result*) (breakpoint.c:9067)
==798== by 0x3E4E7F: create_breakpoint(gdbarch*, event_location const*, char const*, int, char const*, int, int, bptype, int, auto_boolean, breakpoint_ops const*, int, int, int, unsigned int) (breakpoint.c:9248)
==798== by 0x3E55F5: break_command_1(char const*, int, int) (breakpoint.c:9434)
==798== by 0x40BA68: cmd_func(cmd_list_element*, char const*, int) (cli-decode.c:1888)
==798== by 0x665300: execute_command(char const*, int) (top.c:630)
...
linespec_parser_new allocates a std::vector<symtab *> at line 2756, and stores
the pointer to this vector in PARSER_RESULT (parser)->file_symtabs. At 3
different places in linespec.c, another std::vector is assigned to a
linespec->file_symtabs, without first deleting the current value.
The leak is fixed by assigning the vector itself instead of the pointer.
Everything should be moved, so there is no significant data copy
involved.
Tested on debian/amd64, + a bunch of tests re-run under valgrind
(including the test that throws an error).
gdb/ChangeLog:
* linespec.c (symtab_vector_up): Remove.
(symtabs_from_filename): Change return type to std::vector.
(collect_symtabs_from_filename): Likewise.
(create_sals_line_offset): Assign return value of
collect_symtabs_from_filename to *ls->file_symtabs.
(convert_explicit_location_to_linespec): Remove call to release.
(parse_linespec): Likewise.
(symtab_collector) <symtab_collector>: Remove initialization of
m_symtabs.
<release_symtabs>: Change return type to std::vector<symtab *>.
<operator ()>: Adjust.
John Baldwin [Fri, 30 Nov 2018 21:21:19 +0000 (13:21 -0800)]
Update the conditionals in fbsd-nat.h so they are always honored.
Not all of the architecture-specific FreeBSD target files were
including the right headers to enable conditionals in fbsd-nat.h after
the C++ target conversion. As a result, certain operations like 'info
auxv' and 'p $_siginfo' were not working for some native targets
(noticed on RISC-V). Fix this in a couple of ways:
1) Declare fbsd_nat_target::xfer_partial unconditionally and only use
conditionals in the function body for individual target objects.
Originally this function was only used to read the ELF auxiliary
vector, so the entire function was conditional on a macro required
for that object (KERN_AUXV_PROC). However, xfer_partial has since
grown support for additional objects. Making the function
unconditional avoids needing to add the right header to fbsd-nat.h
and allows each target object to use independent requirements.
This did require using a more explicit conditional test for the
$_siginfo support. Removing the "outer" KERN_PROC_AUXV test
enabled $_siginfo for all kernels with PT_LWPINFO, but some older
kernels (FreeBSD 6.0) exposed PT_LWPINFO with a different siginfo
format. Instead use an explicit test for when the current siginfo
format was adopted (shipped in FreeBSD 7.0). This actually enables
$_siginfo on a wider range of kernels as KERN_PROC_AUXV wasn't
introduced until FreeBSD 9.1/10.0.
2) Include <sys/proc.h> in fbsd-nat.h for the definition of
TDP_RFPPWAIT that governs support for fork following.
gdb/ChangeLog:
* fbsd-nat.c [__FreeBSD_version >= 700009] (USE_SIGINFO): Macro
defined.
(union sigval32, struct siginfo32, fbsd_siginfo_size)
(fbsd_convert_siginfo): Make conditional on USE_SIGINFO instead
of KERN_PROC_AUXV and PT_LWPINFO.
(fbsd_nat_target::xfer_partial): Define method unconditionally.
Make TARGET_OBJECT_SIGNAL_INFO conditional on USE_SIGINFO.
Make TARGET_OBJECT_AUXV conditional on KERN_PROC_AUXV.
Make TARGET_OBJECT_FREEBSD_VMMAP and
TARGET_OBJECT_FREEBSD_PS_STRINGS conditional on KERN_PROC_VMMAP
and KERN_PROC_PS_STRINGS.
* fbsd-nat.h: Include <sys/proc.h>.
(fbsd_nat_target::xfer_partial): Declare method unconditionally.
Fredrik Noring [Fri, 30 Nov 2018 18:32:36 +0000 (18:32 +0000)]
GAS/MIPS: Add `-mfix-r5900' option for the R5900 short loop erratum
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
Andrew Burgess [Wed, 28 Nov 2018 22:42:27 +0000 (22:42 +0000)]
gdb/riscv: Add read_description method for riscv_linux_nat_target
Adds riscv_linux_nat_target::read_description method to find a
suitable target description for the native linux target we are running
on.
Currently this will supply a suitably sized set of x-registers, and
will probe the kernel to see if the f-registers are readable. If they
are readable then we currently assume that the f-registers are the
same size as the x-registers as I don't know of a good way to probe
the f-register length. This will obviously need fixing in future.
As of Linux 4.19 there is no ptrace support for reading the
f-registers, this should appear in 4.20, so right now we only return
target descriptions without f-registers.
gdb/ChangeLog:
* riscv-linux-nat.c: Add 'inferior.h' and 'target-descriptions.h'
header files.
(riscv_linux_nat_target::read_description): New method.
Andrew Burgess [Thu, 29 Nov 2018 15:51:58 +0000 (15:51 +0000)]
gdb/riscv: Create each unique target description only once
GDB relies on the fact that if two target descriptions have the same
contents, then they will be the same object instance (having the same
address). One place where this is a requirement is in
GDBARCH_LIST_LOOKUP_BY_INFO which is used to find previously created
gdbarch objects.
In GDBARCH_LIST_LOOKUP_BY_INFO a pointer comparison is made on the
gdbarch's target description, if the pointers are different then it is
assumed the gdbarches have different, non-compatible target
descriptions.
Previously we would create duplicate target descriptions in the belief
that RISCV_GDBARCH_INIT would spot this duplication and discard the
second instance. However, this was incorrect, and instead we ended up
creating duplicate gdbarch objects.
With this commit every unique feature set will create one and only one
target description, the feature set and resulting target description
is then cached so that the same target description object can be
returned later.
Many other target avoid this problem by creating a small number of
named target descriptions, and returning one of these. However, we
currently have 8 possible target descriptions (32 vs 64 bit for x-reg
and f-reg, and h/w or s/w float abi) and creating each of these just
to avoid a dynamic cache seems pointless.
gdb/ChangeLog:
* arch/riscv.h (riscv_gdbarch_features::hash): New method.
* arch/riscv.c (struct riscv_gdbarch_features_hasher): New.
(riscv_tdesc_cache): New global.
(riscv_create_target_description): Look in the cache before
creating a new target description.
Andrew Burgess [Thu, 29 Nov 2018 15:07:59 +0000 (15:07 +0000)]
gdb/riscv: Add equality operators to riscv_gdb_features
Add '==' and '!=' operators for the struct riscv_gdb_features,
allowing a small simplification.
gdb/ChangeLog:
* arch/riscv.h (riscv_gdb_features::operator==): New.
(riscv_gdb_features::operator!=): New.
* riscv-tdep.c (riscv_gdbarch_init): Make use of the inequality
operator.
Andrew Burgess [Thu, 29 Nov 2018 15:38:29 +0000 (15:38 +0000)]
gdb/riscv: Make some target description functions constant
Makes more of the interface related to fetching target descriptions
constant.
gdb/ChangeLog:
* arch/riscv.h (riscv_create_target_description): Make return type
const.
* arch/riscv.c (riscv_create_target_description): Likewise.
* riscv-tdep.c (riscv_find_default_target_description): Likewise.
Sergio Durigan Junior [Wed, 28 Nov 2018 22:22:08 +0000 (17:22 -0500)]
Fix dwarf2read.c:dwarf2_find_containing_comp_unit's binary search
First of all, I would like to express my gratitude to Keith Seitz, Jan
Kratochvil and Tom Tromey, who were really kind and helped a lot with
this bug. The patch itself was authored by Jan.
This all began with:
https://bugzilla.redhat.com/show_bug.cgi?id=1639242
py-bt is broken, results in exception
In summary, the error reported by the bug above is:
$ gdb -args python3
GNU gdb (GDB) Fedora 8.1.1-3.fc28
(...)
Reading symbols from python3...Reading symbols from /usr/lib/debug/usr/bin/python3.6-3.6.6-1.fc28.x86_64.debug...done.
done.
Dwarf Error: could not find partial DIE containing offset 0x316 [in module /usr/lib/debug/usr/bin/python3.6-3.6.6-1.fc28.x86_64.debug]
After a long investigation, and after thinking that the problem might
actually be on DWZ's side, we were able to determine that there's
something wrong going on when
dwarf2read.c:dwarf2_find_containing_comp_unit performs a binary search
over all of the CUs belonging to an objfile in order to find the CU
which contains a DIE at an specific offset. The current algorithm is:
static struct dwarf2_per_cu_data *
dwarf2_find_containing_comp_unit (sect_offset sect_off,
unsigned int offset_in_dwz,
struct dwarf2_per_objfile *dwarf2_per_objfile)
{
struct dwarf2_per_cu_data *this_cu;
int low, high;
const sect_offset *cu_off;
low = 0;
high = dwarf2_per_objfile->all_comp_units.size () - 1;
while (high > low)
{
struct dwarf2_per_cu_data *mid_cu;
int mid = low + (high - low) / 2;
mid_cu = dwarf2_per_objfile->all_comp_units[mid];
cu_off = &mid_cu->sect_off;
if (mid_cu->is_dwz > offset_in_dwz
|| (mid_cu->is_dwz == offset_in_dwz && *cu_off >= sect_off))
high = mid;
else
low = mid + 1;
}
For the sake of this example, let's consider that "sect_off =
0x7d".
There are a few important things going on here. First,
"dwarf2_per_objfile->all_comp_units ()" will be sorted first by
whether the CU is a DWZ CU, and then by cu->sect_off. In this
specific bug, "offset_in_dwz" is false, which means that, for the most
part of the loop, we're going to do "high = mid" (i.e, we'll work with
the lower part of the vector).
In our particular case, when we reach the part where "mid_cu->is_dwz
== offset_in_dwz" (i.e, both are false), we end up with "high = 2" and
"mid = 1". I.e., there are only 2 elements in the vector who are not
DWZ. The vector looks like this:
#0: cu->sect_off = 0; length = 114; is_dwz = false <-- low
#1: cu->sect_off = 114; length = 7796; is_dwz = false <-- mid
#2: cu->sect_off = 0; length = 28; is_dwz = true <-- high
...
The CU we want is #1, which is exactly where "mid" is. Also, #1 is
not DWZ, which is also exactly what we want. So we perform the second
comparison:
(mid_cu->is_dwz == offset_in_dwz && *cu_off >= sect_off)
^^^^^^^^^^^^^^^^^^^
Because "*cu_off = 114" and "sect_off = 0x7d", this evaluates to
false, so we end up with "low = mid + 1 = 2", which actually gives us
the wrong CU (i.e., a CU that is DWZ). Next in the code, GDB does:
gdb_assert (low == high);
this_cu = dwarf2_per_objfile->all_comp_units[low];
cu_off = &this_cu->sect_off;
if (this_cu->is_dwz != offset_in_dwz || *cu_off > sect_off)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
{
if (low == 0 || this_cu->is_dwz != offset_in_dwz)
error (_("Dwarf Error: could not find partial DIE containing "
"offset %s [in module %s]"),
sect_offset_str (sect_off),
bfd_get_filename (dwarf2_per_objfile->objfile->obfd));
...
Triggering the error we saw in the original bug report.
It's important to notice that we see the error message because the
selected CU is a DWZ one, but we're looking for a non-DWZ CU here.
However, even when the selected CU is *not* a DWZ (and we don't see
any error message), we still end up with the wrong CU. For example,
suppose that the vector had:
#0: cu->sect_off = 0; length = 114; is_dwz = false
#1: cu->sect_off = 114; length = 7796; is_dwz = false
#2: cu->sect_off = 7910; length = 28; is_dwz = false
...
I.e., #2's "is_dwz" is false instead of true. In this case, we still
want #1, because that's where the DIE is located. After the loop ends
up in #2, we have "is_dwz" as false, which is what we wanted, so we
compare offsets. In this case, "7910 >= 0x7d", so we set "mid = high
= 2". Next iteration, we have "mid = 0 + (2 - 0) / 2 = 1", and thus
we examining #1. "is_dwz" is still false, but "114 >= 0x7d" also
evaluates to false, so "low = mid + 1 = 2", which makes the loop stop.
Therefore, we end up choosing #2 as our CU, even though #1 is the
right one.
The problem here is happening because we're comparing "sect_off"
directly against "*cu_off", while we should actually be comparing
against "*cu_off + mid_cu->length" (i.e., the end offset):
...
|| (mid_cu->is_dwz == offset_in_dwz
&& *cu_off + mid_cu->length >= sect_off))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
And this is what the patch does. The idea is that if GDB is searching
for an offset that falls above the *end* of the CU being
analyzed (i.e., "mid"), then the next iteration should try a
higher-offset CU next. The previous algorithm was using
the *beginning* of the CU.
Unfortunately, I could not devise a testcase for this problem, so I am
proposing a fix with this huge explanation attached to it in the hope
that it is sufficient. After talking a bit to Keith (our testcase
guru), it seems that one would have to create an objfile with both DWZ
and non-DWZ sections, which may prove very hard to do, I think.
I ran this patch on our BuildBot, and no regressions were detected.
gdb/ChangeLog:
2018-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Keith Seitz <keiths@redhat.com>
Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1613614
* dwarf2read.c (dwarf2_find_containing_comp_unit): Add
'mid_cu->length' to '*cu_off' when checking if 'sect_off' is
inside the CU.
Pedro Alves [Fri, 30 Nov 2018 17:49:49 +0000 (17:49 +0000)]
target_ops::to_stratum -> target_ops::stratum() virtual method
Given that a target's stratum is a property of the type, and not of an
instance of the type, get rid of to_stratum data field and replace it
with a virtual method.
I.e., when we have e.g., 10 target remote instances active, there's no
need for each of the instances to have their own to_stratum copy.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* aix-thread.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bfd-target.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bsd-uthread.c (bsd_uthread_target) <bsd_uthread_target>: Delete.
<stratum>: New override.
* exec.c (exec_target) <exec_target>: Delete.
<stratum>: New override.
* gdbarch-selftests.c (register_to_value_test): Adjust to use the
stratum method instead of the to_stratum field.
* linux-thread-db.c (thread_db_target) <thread_db_target>: Delete.
<stratum>: New override.
(thread_db_target::thread_db_target): Delete.
* make-target-delegates (print_class): Don't print a ctor
declaration. Print a stratum method override declaration.
* process-stratum-target.h (process_stratum_target)
<process_stratum_target>: Delete.
<stratum>: New override.
* ravenscar-thread.c (ravenscar_thread_target)
<ravenscar_thread_target>: Delete.
<stratum>: New override.
* record-btrace.c (record_btrace_target)
<record_btrace_target>: Delete.
<stratum>: New override.
* record-full.c (record_full_base_target)
<record_full_base_target>: Delete.
<stratum>: New override.
* record.c (record_disconnect, record_detach)
(record_mourn_inferior, record_kill): Adjust to use the stratum
method instead of the to_stratum field.
* regcache.c (cooked_read_test, cooked_write_test): Likewise.
* sol-thread.c (sol_thread_target)
<sol_thread_target>: Delete.
<stratum>: New override.
* spu-multiarch.c (spu_multiarch_target)
<spu_multiarch_target>: Delete.
<stratum>: New override.
* target-delegates.c: Regenerate.
* target.c (target_stack::push, target_stack::unpush)
(pop_all_targets_above, pop_all_targets_at_and_above)
(info_target_command, target_require_runnable)
(target_stack::find_beneath): Adjust to use the stratum method
instead of the to_stratum field.
(dummy_target::dummy_target): Delete.
(dummy_target::stratum): New.
(debug_target::debug_target): Delete.
(debug_target::stratum): New.
(maintenance_print_target_stack): Adjust to use the stratum method
instead of the to_stratum field.
* target.h (struct target_ops) <stratum>: New method.
<to_stratum>: Delete.
<is_pushed>: Adjust to use the stratum method
instead of the to_stratum field.
projects / external / binutils.git / log