record-btrace: fix insn range in function call history

With the "/i" modifier, we print the instruction number range in the
"record function-call-history" command as [begin, end).

It would be more intuitive if we printed the range as [begin, end].

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* record-btrace.c (btrace_call_history_insn_range): Print
insn range as [begin, end].

btrace: change branch trace data structure

The branch trace is represented as 3 vectors:
  - a block vector
  - a instruction vector
  - a function vector

Each vector (except for the first) is computed from the one above.

Change this into a graph where a node represents a sequence of instructions
belonging to the same function and where we have three types of edges to connect
the function segments:
  - control flow
  - same function (instance)
  - call stack

This allows us to navigate in the branch trace.  We will need this for "record
goto" and reverse execution.

This patch introduces the data structure and computes the control flow edges.
It also introduces iterator structs to simplify iterating over the branch trace
in control-flow order.

It also fixes PR gdb/15240 since now recursive calls are handled correctly.
Fix the test that got the number of expected fib instances and also the
function numbers wrong.

The current instruction had been part of the branch trace.  This will look odd
once we start support for reverse execution.  Remove it.  We still keep it in
the trace itself to allow extending the branch trace more easily in the future.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* btrace.h (struct btrace_func_link): New.
(enum btrace_function_flag): New.
(struct btrace_inst): Rename to ...
(struct btrace_insn): ...this. Update all users.
(struct btrace_func) <ibegin, iend>: Remove.
(struct btrace_func_link): New.
(struct btrace_func): Rename to ...
(struct btrace_function): ...this. Update all users.
(struct btrace_function) <segment, flow, up, insn, insn_offset)
(number, level, flags>: New.
(struct btrace_insn_iterator): Rename to ...
(struct btrace_insn_history): ...this.
Update all users.
(struct btrace_insn_iterator, btrace_call_iterator): New.
(struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
(struct btrace_target_info) <begin, end, level>
<insn_history, call_history>: New.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* btrace.c (btrace_init_insn_iterator)
(btrace_init_func_iterator, compute_itrace): Remove.
(ftrace_print_function_name, ftrace_print_filename)
(ftrace_skip_file): Change
parameter to const.
(ftrace_init_func): Remove.
(ftrace_debug): Use new btrace_function fields.
(ftrace_function_switched): Also consider gaining and
losing symbol information).
(ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
(ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
(ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
New.
(ftrace_new_function): Move. Remove debug print.
(ftrace_update_lines, ftrace_update_insns): New.
(ftrace_update_function): Check for call, ret, and jump.
(compute_ftrace): Renamed to ...
(btrace_compute_ftrace): ...this. Rewritten to compute call
stack.
(btrace_fetch, btrace_clear): Updated.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* record-btrace.c (require_btrace): Use new btrace thread
info fields.
(record_btrace_info, btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range):
Use new btrace thread info fields and new iterator.
(btrace_func_history_src_line): Rename to ...
(btrace_call_history_src_line): ...this. Use new btrace
thread info fields.
(btrace_func_history): Rename to ...
(btrace_call_history): ...this. Use new btrace thread info
fields and new iterator.
(record_btrace_call_history, record_btrace_call_history_range):
Use new btrace thread info fields and new iterator.

testsuite/
* gdb.btrace/function_call_history.exp: Fix expected function
trace.
* gdb.btrace/instruction_history.exp: Initialize traced.
Remove traced_functions.

frame: add frame_id_build_unavailable_stack_special

Add a function to build a frame_id for a frame with unavailable stack
and with a special identifier address.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* frame.h (frame_id_build_unavailable_stack_special): New.
* frame.c (frame_id_build_unavailable_stack_special): New.

gdbarch: add instruction predicate methods

Add new methods to gdbarch for analyzing the instruction at a given address.
Implement those methods for i386 and amd64 architectures.

This is needed by "record btrace" to detect function calls in the
execution trace.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
(amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
(amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
to gdbarch.
* i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
(i386_insn_is_jump, i386_jmp_p): New.
(i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
insn_is_jump to gdbarch.
* gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* arch-utils.h (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
* arch-utils.c (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.

btrace: uppercase btrace_read_type

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* common/btrace-common.h (btrace_read_type) <btrace_read_all>:
Change to ...
(btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
(btrace_read_type) <btrace_read_new>: Change to ...
(btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.

btrace, linux: fix memory leak when reading branch trace

When it takes more than one iteration to read the BTS trace, the trace from the
previous iteration is leaked.  Fix it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* common/linux-btrace.c (linux_read_btrace): Free trace from
previous iteration.

btrace, test: fix multi-line btrace tests

For testing multi-line test output, gdb.btrace tests used the following
pattern:

  gdb_test "..." "
  ...\r
  ..."

Change this to:

  gdb_test "..." [join [list \
    "..." \
    "..."] "\r\n"]

Also extract repeated tests into a test function and shorten or remove
test messages.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

testsuite/
* gdb.btrace/function_call_history.exp: Update
* gdb.btrace/instruction_history.exp: Update.

test, btrace: update expected text

The error message for starting recording twice changed.
Update the expected text to fix resulting regressions.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

* gdb.btrace/enable.exp: Update expected text.

Fix testsuite/gdb.dwarf2/dw2-dos-drive.exp on ARM.

This test currently fails on ARM:

  (gdb) PASS: gdb.dwarf2/dw2-dos-drive.exp: set breakpoint pending off
  break 'z:file.c':func
  Cannot access memory at address 0x0

The error is GDB trying to read the prologue at the breakpoint's
address, and failing:

  38 throw_error() exceptions.c:444 0x0016728c
  37 memory_error() corefile.c:204 0x001d1fcc
  36 read_memory() corefile.c:223 0x001d201a
  35 read_memory_unsigned_integer() corefile.c:312 0x001d2166
  34 arm_skip_prologue() arm-tdep.c:1452 0x00054270

  static CORE_ADDR
  arm_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
  {
  ...
    for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
      {
        inst = read_memory_unsigned_integer (skip_pc, 4, byte_order_for_code);

The test doesn't execute the compiled object's code, so GDB will try
to read memory from the binary's sections.  Instructions on ARM are
4-byte wide, and thus ARM's prologue scanner reads in 4-byte chunks.
As the section 'func' is put at is only 1 byte long, and no other
section is allocated contiguously:

  ...
  Sections:
  Idx Name          Size      VMA       LMA       File off  Algn
    0 .text         00000001  00000000  00000000  00000034  2**0
                    CONTENTS, ALLOC, LOAD, READONLY, CODE
  ...

... the exec target fails the read the 4 bytes.

Fix this by increasing the function's size.

gdb/testsuite/ChangeLog:
2014-01-16  Omair Javaid  <Omair.Javaid@linaro.org>

* gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
bytes.

Skip directories with LIBPATH_SUFFIX_SKIP suffix

On Linux/x86-64, when binutils is configured with --libdir=/usr/lib64,
genscripts.sh treats /usr/lib64 as the default search directory.  It
puts /usr/lib64 in linker scripts for all emulations, like

---
/* Script for -z combreloc: combine and sort reloc sections */
OUTPUT_FORMAT("elf32-i386", "elf32-i386",
      "elf32-i386")
OUTPUT_ARCH(i386)
ENTRY(_start)
SEARCH_DIR("/usr/x86_64-redhat-linux/lib32");
SEARCH_DIR("/usr/i386-redhat-linux/lib32"); SEARCH_DIR("/usr/lib6432");
SEARCH_DIR("/usr/local/lib32"); SEARCH_DIR("/lib32");
SEARCH_DIR("/usr/lib32"); SEARCH_DIR("/usr/i386-redhat-linux/lib");
SEARCH_DIR("/usr/lib64"); SEARCH_DIR("/usr/local/lib");
SEARCH_DIR("/lib"); SEARCH_DIR("/usr/lib");
---

/usr/lib6432 is odd and /usr/lib64 is wrong.  This patch changes
genscripts.sh to check LIBPATH_SUFFIX_SKIP if it is defined.  It
skips directories with LIBPATH_SUFFIX_SKIP suffix.

PR ld/16456
* genscripts.sh: Don't search directory with LIBPATH_SUFFIX_SKIP
suffix.
* emulparams/elf32_x86_64.sh (LIBPATH_SUFFIX_SKIP): Set to 64
for elf32_x86_64 emulation.
* emulparams/elf_i386.sh (LIBPATH_SUFFIX_SKIP): Set to 64
for elf_i386 emulation.

Tidy ld use of bfd_section userdata.

A long time ago ld made use of userdata to tie an output section to
its lang_input_statement_struct object file.  Some time later Joern
made map file printing of symbols at lot faster, using userdata on
input sections.  That complicated allocation of userdata, and when the
output section use disappeared a year later, the code wasn't properly
cleaned up.  This patch does that cleanup, and also tidies the symbol
printing code to not allocate userdata where it won't be needed.  We
don't print symbols defined in the absolute section or in output
sections.

* ld.h (fat_section_userdata_type, get_userdata): Move to..
* ldlang.h (input_section_userdata_type, get_userdata): ..here.
* ldlang.c (init_map_userdata): Delete.  Fold into..
(sort_def_symbol): ..here.  Don't attach input section userdata
to output sections or global bfd sections.
(lang_map): Don't pre-allocate input section userdata.
(init_os): Don't allocate userdata for output sections.
(print_all_symbols): Update.

Fix mips segfault on GOT access of absolute symbol

When a symbol is absolute, this code in mips_elf_record_got_page_entry
      entry = bfd_zalloc (sec->owner, sizeof (*entry));
segfaults.  sec == bfd_abs_section_ptr and sec->owner == NULL.

* elfxx-mips.c (mips_elf_record_got_page_entry): Pass in a
mips_elf_traverse_got_arg* rather than mips_got_info*.
Adjust caller.  Alloc on output_bfd rather than symbol section
owner.

delete thread_id_to_gdb_id, unused

* inferiors.c (thread_id_to_gdb_id): Delete.
* inferiors.h (thread_id_to_gdb_id): Delete.

daily update

AArch64: gdb.base/float.exp: Fix `info float' test

* gdb.base/float.exp: Handle "aarch64*-*-*" targets.

* dwarf2read.c (open_and_init_dwp_file): Use pulongest to print uint32_t.

move the "main" data into the per-BFD object

This adds the "main"-related data into the per-BFD.  This is needed
because once symbol sharing across objfiles is complete, computing the
main name as a side effect of symbol reading will no longer work --
the symbols simply won't be re-read.

After this change, set_main_name is only used by the main_name
machinery itself, so this patch makes it static.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* dbxread.c (process_one_symbol): Use set_objfile_main_name.
* dwarf2read.c (read_partial_die): Use set_objfile_main_name.
* objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
(set_objfile_main_name): New function.
* objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
language_of_main>: New fields.
(set_objfile_main_name): Declare.
* symtab.c (find_main_name): Loop over objfiles to find the main
name and language.
(set_main_name): Now static.
(get_main_info): Add comment.
* symtab.h (set_main_name): Don't declare.

move main name into the progspace

This moves the "main" name and language into an object attached to the
current progspace.  This prevents problems if there are multiple
inferiors tha have different ideas of "main" -- which matters at least
for unwinding, see frame.c:inside_main_func.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* symtab.c (main_progspace_key): New global.
(struct main_info): New.
(name_of_main, language_of_main): Remove.
(get_main_info, main_info_cleanup): New function.
(set_main_name, main_name, main_language): Use get_main_info.
(_initialize_symtab): Initialize main_progspace_key.

make language_of_main static

This makes the global language_of_main static.  Now it can be set only
via a new argument to set_main_name.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* dbxread.c (process_one_symbol): Update.
* dwarf2read.c (read_partial_die): Update.
* symfile.c (set_initial_language): Call main_language.
* symtab.c (language_of_main): Now static.
(set_main_name): Add 'lang' parameter.
(find_main_name): Update.
(main_language): New function.
(symtab_observer_executable_changed): Update.
* symtab.h (set_main_name): Update.
(language_of_main): Remove.
(main_language): Declare.

move the entry point info into the per-bfd object

This moves the entry point information into the per-BFD object and
arranges not to recompute it when it has already been computed.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* symfile.c (init_entry_point_info): Use new "initialized" field.
Update.
* objfiles.h (struct entry_point) <initialized>: New field.
(struct objfile_per_bfd_storage) <ei>: New field, moved from...
(struct objfile) <ei>: ...here.  Remove.
* objfiles.c (entry_point_address_query): Update.

relocate the entry point address when used

This changes the entry point to be unrelocated in the objfile, and
instead applies the relocation when it is used.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* objfiles.c (entry_point_address_query): Relocate entry point
address.
(objfile_relocate1): Do not relocate entry point address.
* objfiles.h (struct entry_info) <entry_point>: Update comment.
<the_bfd_section_index>: New field.
* symfile.c (init_entry_point_info): Find the entry point's
section.

change solib-frv to use entry_point_address_query

This is just a minor cleanup in advance of some other changes, that
modifies solib-frv.c to use entry_point_address_query.  I don't have a
good way to test this but I think it is obviously correct.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* solib-frv.c (enable_break): Use entry_point_address_query.

gdb: Add a NEWS entry for ARM record/replay improvements

This patch adds a news entry about improvements in record-replay and
reverse debugging support for arm*-linux* targets.

gdb/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* NEWS: Add note on improved process record-replay on
arm*-linux* targets.

gdb: ARM: Update configure.tgt and enable gdb.reverse testsuite

gdb/testsuite/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* lib/gdb.exp (supports_process_record): Return true for
arm*-linux*.  (supports_reverse): Likewise.

gdb: ARM: Add support for thumb32 instructions recording

gdb/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* arm-tdep.c (enum arm_record_result): New enum.
(arm_record_unsupported_insn): New function.
(arm_record_coproc_data_proc): Removed.
(thumb2_record_ld_st_multiple): New function.
(thumb2_record_ld_st_dual_ex_tbb): New function.
(thumb2_record_data_proc_sreg_mimm): New function.
(thumb2_record_ps_dest_generic): New function.
(thumb2_record_branch_misc_cntrl): New function.
(thumb2_record_str_single_data): New function.
(thumb2_record_ld_mem_hints): New function.
(thumb2_record_ld_word): New function.
(thumb2_record_lmul_lmla_div): New function.
(thumb2_record_decode_insn_handler): New function.
(decode_insn): Add thumb32 instruction handlers.

gdb: ARM: Adds support for recording system call instructions

gdb/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
(struct arm_linux_record_tdep): Declare.
(arm_canonicalize_syscall): New function.
(arm_all_but_pc_registers_record): New function.
(arm_linux_syscall_record): New function.
(arm_linux_init_abi): Add syscall recording constructs.
* arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
decoding.  (arm_record_coproc_data_proc): Update arm syscall
decoding.
* arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
<arm_syscall_record>: New field.
* configure.tgt (arm*-*-linux*): Add linux-record.o to
gdb_target_obs.

gdb: ARM: Fix for bug in pop instruction decoding

This patch fixes thumb push instruction recording by replacing base
register from pc to sp.

gdb/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* arm-tdep.c (thumb_record_misc): Update to use sp as base
register for push instruction recording.

gdb: ARM: Fix for bugs in push and ldm instructions decoding

This patch corrects the register numbers and removes multiple loops in
recording procedure of instructions involving multiple registers.

gdb/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* arm-tdep.c (thumb_record_misc): Update to correct logical
error while recording ldm, ldmia and pop instructions.

gdb: ARM: Fix for memory record corruption due to 64bit addresses

gdb/ChangeLog:

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

* arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.

Fix go32-nat.c build fallout from to_detach constification.

The recent constification of to_detach missed updating the forward
declaration of go32_detach, breaking the build:

 ../../src/gdb/go32-nat.c:387:1: error: conflicting types for 'go32_detach'
 ../../src/gdb/go32-nat.c:240:13: note: previous declaration of 'go32_detach' was here

go32_detach is actually defined before it's ever used, making the
forward declaration is unnecessary.  So we can just remove it instead
of updating it.  While at it, remove all others in the same situation.
Tested by building a djgpp gdb.

gdb/
2014-01-15  Pedro Alves  <palves@redhat.com>

* go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
(go32_resume, go32_fetch_registers, store_register)
(go32_store_registers, go32_prepare_to_store)
(go32_xfer_memory, go32_files_info, go32_kill_inferior)
(go32_create_inferior, go32_can_run, go32_terminal_init)
(go32_terminal_inferior, go32_terminal_ours): Delete forward
declarations.

Silence uninitialized warning on ehdr_start_save

Older GCC, like 4.1/4.2, will issue an uninitialized warning on
ehdr_start_save.  This patch silences by using

struct bfd_link_hash_entry ehdr_start_save = ehdr_start_save;

* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Silence uninitialized warning on ehdr_start_save with older
GCC.

introduce async_callback_ftype

This introduces async_callback_ftype.  This is needed for
make-target-delegates to work properly, as it doesn't implement a real
parser.  I think it's also an ok cleanup in its own right.

2014-01-15  Tom Tromey  <tromey@redhat.com>

* target.h (async_callback_ftype): New typedef.
(struct target_ops) <to_async>: Use it.

Fix small style violation in py-value.c:get_field_type

gdb/ChangeLog:

        * python/py-value.c (get_field_type): Remove unnecessary curly
        braces for single-statement if block.

Tested on x86_64-linux.

Add missing empty line after declarations in "if" block (py-type.c).

This patch fixes a small coding-style violation...

gdb/ChangeLog:

        * python/py-type.c (convert_field): Add missing empty line
        after declarations.

Small fixes to the GDB/MI Output Syntax grammar.

This patch fixes the grammar, and tries to do it in a way that makes
the logic behind the current implementation a little clearer.

gdb/doc/ChangeLog:

        (from Yuanhui Zhang  <asmwarrior@gmail.com>)
        (from Joel Brobecker  <brobecker@adacore.com>)
        * gdb.texinfo (GDB/MI Output Syntax): Add some missing "nl"
        markers.  Remove one that was misplaced.

Revert the last change

It has been fixed by

commit 4199e3b8669d0a36448687850374fdc2ad7240b6
Author: Alan Modra <amodra@gmail.com>
Date:   Wed Jan 15 21:50:55 2014 +1030

    non-PIC references to __ehdr_start in pie and shared

    Rather than hacking every backend to not discard dynamic relocations
    against an undefined hidden __ehdr_start, make it appear to be defined
    early.  We want __ehdr_start hidden before size_dynamic_sections so
    that it isn't put in .dynsym, but we do need the dynamic relocations
    for a PIE or shared library with a non-PIC reference.  Defining it
    early is wrong if we don't actually define the symbol later to its
    proper value.  (In some cases we want to leave the symbol undefined,
    for example, when the ELF header isn't loaded, and we don't have this
    infomation available in before_allocation.)

* elf32-i386.c (elf_i386_allocate_dynrelocs): Revert the last
change.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.

non-PIC references to __ehdr_start in pie and shared

Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early.  We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference.  Defining it
early is wrong if we don't actually define the symbol later to its
proper value.  (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)

ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Define
__ehdr_start before size_dynamic_sections and restore afterwards.
ld/testsuite/
* ld-elf/ehdr_start-shared.d: New.
* ld-elf/ehdr_start-userdef.d: xfail frv.
* ld-elf/ehdr_start-weak.d: Likewise.
* ld-elf/ehdr_start.d: Likewise.

psymtab cleanup patch 3/3

This last patch removes "partial" from the names of
expand_partial_symbol_names and map_partial_symbol_filenames.
It also renames expand_partial_symbol_names to match the
struct quick_symbol_functions "method" that it wraps:
expand_symtabs_matching.

This patch also adds two parameters to expand_symtabs_matching
so that it can fully wrap the underlying quick_symbol_functions method.
This makes it usable in more places.
I thought of having a cover function that still had the same
signature as the old expand_partial_symbol_names function,
but I couldn't think of a good name, and it wasn't clear it was
worth it anyway.

* symfile.h (expand_symtabs_matching): Renamed from
expand_partial_symbol_names.  Update prototype.
(map_symbol_filenames): Renamed from map_partial_symbol_filenames.
* symfile.c (expand_symtabs_matching): Renamed from
expand_partial_symbol_names.  New args file_matcher, kind.
Rename arg fun to symbol_matcher.
(map_symbol_filenames): Renamed from map_partial_symbol_filenames.
* ada-lang.c (ada_complete_symbol_matcher): Renamed from
ada_expand_partial_symbol_name.
(ada_make_symbol_completion_list): Update to call
expand_symtabs_matching.
(ada_add_global_exceptions): Call expand_symtabs_matching.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
call map_symbol_filenames.
* symtab.c (sources_info): Update to call map_symbol_filenames.
(search_symbols): Call expand_symtabs_matching.
(symbol_completion_matcher): Renamed from expand_partial_symbol_name.
(default_make_symbol_completion_list_break_on): Update to call
expand_symtabs_matching.
(make_source_files_completion_list): Update to call
map_symbol_filenames.

psymtab cleanup patch 2/3

This patch adds two typedefs:
expand_symtabs_file_matcher_ftype
expand_symtabs_symbol_matcher_ftype

It also renames the NAME_MATCHER argument in expand_symtabs_matching.
The function is named expand_symtabs_matching and it takes a name_matcher
argument.  Name of what?  The symtab?  A symbol?
I made it SYMBOL_MATCHER to make it clearer.

* symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
(expand_symtabs_symbol_matcher_ftype): New typedef.
(quick_symbol_functions.expand_symtabs_matching): Update to use.
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
* symfile.c (expand_partial_symbol_names): Update to use
expand_symtabs_symbol_matcher_ftype.
* dwarf2read.c (dw2_expand_symtabs_matching): Update to use
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
Arg name_matcher renamed to symbol_matcher.
* psymtab.c (recursively_search_psymtabs): Update to use
expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
sym_matcher.
(expand_symtabs_matching_via_partial): Update to use
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
Arg name_matcher renamed to symbol_matcher.

psymtab cleanup patch 1/3

This is the first of a set of three patches to cleanup psymtab.c a bit.

Basically, these two functions do not belong in psymtab.c:
expand_partial_symbol_names, map_partial_symbol_filenames,
and "partial" does not belong in the function name.

This first patch moves them to a better location.
The second patch adds some typedefs for function parameters to
quick_symbol_functions.expand_symtabs_matching.
The third patch removes "partial" from the function names
and uses them in more places.

* psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
(map_partial_symbol_filenames): Ditto.
* psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
(map_partial_symbol_filenames): Ditto.
* symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
(map_partial_symbol_filenames): Ditto.
* symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
(map_partial_symbol_filenames): Ditto.
* symtab.c: Delete #include "psymtab.h".

Don't discard relocs against __ehdr_start

__ehdr_start will be defined by assign_file_positions_for_non_load_sections
later.

PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't discard relocs
against __ehdr_start.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.

Revert the last change

* elf32-i386.c (elf_i386_allocate_dynrelocs): Revert the last
change.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.

daily update

Don't update reloc count if there are any non pc-relative relocs

PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't update reloc
count if there are any non pc-relative relocs.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.

Fix "is a record target open" checks.

RECORD_IS_USED and record_full_open look at current_target.to_stratum
to determine whether a record target is in use.  This is wrong because
arch_stratum is greater than record_stratum, so if an arch_stratum
target is pushed, RECORD_IS_USED and record_full_open will miss it.

To fix this, we can use the existing find_record_target instead, which
looks up for a record stratum target across the target stack.  Since
that means exporting find_record_target in record.h, RECORD_IS_USED
ends up redundant, so the patch eliminates it.

That exercise then reveals other issues:

- adjust_pc_after_break is gating record_full_... calls based on
RECORD_IS_USED.  But, record_full_ calls shouldn't be made when
recording with the record-btrace target.  So this adds a new
record_full_is_used predicate to be used in that spot.

- record_full_open says "Process record target already running", even
if the recording target is record-btrace ("process record" is the
original complete name of the record-full target).  record_btrace_open
only says "The process is already being recorded." and does not
suggest "record stop", like record-full does.  The patch factors out
and merges that error to a new record_preopen function that all record
targets call in their open routine.

Tested on x86_64 Fedora 17.

gdb/
2014-01-14  Pedro Alves  <palves@redhat.com>
    Tom Tromey  <tromey@redhat.com>

* infrun.c (use_displaced_stepping): Use find_record_target
instead of RECORD_IS_USED.
(adjust_pc_after_break): Use record_full_is_used instead of
RECORD_IS_USED.
* record-btrace.c (record_btrace_open): Call record_preopen
instead of checking RECORD_IS_USED.
* record-full.c (record_full_shortname)
(record_full_core_shortname): New globals.
(record_full_is_used): New function.
(find_full_open): Call record_preopen instead of checking
RECORD_IS_USED.
(init_record_full_ops): Set the target's shortname to
record_full_shortname.
(init_record_full_core_ops): Set the target's shortname to
record_full_core_shortname.
* record-full.h (record_full_is_used): Declare.
* record.c (find_record_target): Make extern.
(record_preopen): New function.
* record.h (RECORD_IS_USED): Delete macro.
(find_record_target, record_preopen): Declare functions.

2014-01-14  Michael Hudson-Doyle  <michael.hudson@linaro.org>
    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

bfd/
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Use correct
offset while calculating relocation address.
(elfNN_aarch64_create_small_pltn_entry): Likewise.
(elfNN_aarch64_init_small_plt0_entry): Likewise.

Change 'len''s type from LONGEST to ULONGEST: gdbarch methods core_xfer_shared_libraries and core_xfer_shared_libraries_aix

This patch changes the type of 'len' from LONGEST to ULONGEST.  'len'
is the argument of gdbarch methods core_xfer_shared_libraries and
core_xfer_shared_libraries_aix.

gdb:

2014-01-14  Yao Qi  <yao@codesourcery.com>

* gdbarch.sh (core_xfer_shared_libraries): Change its argument
'len''s type to ULONGEST.
(core_xfer_shared_libraries_aix): Likewise.
* gdbarch.c, gdbarch.h: Reenerated.
* i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
Change type of 'len' to ULONGEST.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.

Change 'len' of linux_common_xfer_osdata to ULONGEST.

gdb:

2014-01-14  Yao Qi  <yao@codesourcery.com>

* common/linux-osdata.c (linux_xfer_osdata_processes): Change
type of 'len' to ULONGEST.
(linux_xfer_osdata_processgroups): Likewise.
(linux_xfer_osdata_threads): Likewise.
(linux_xfer_osdata_fds): Likewise.
(linux_xfer_osdata_isockets): Likewise.
(linux_xfer_osdata_shm): Likewise.
(linux_xfer_osdata_sem): Likewise.
(linux_xfer_osdata_msg): Likewise.
(linux_common_xfer_osdata): Likewise.
(struct osdata_type) <getter>: Likewise.
* common/linux-osdata.h (linux_common_xfer_osdata): Update
the declaration.

Change to_xfer_partial 'len' type to ULONGEST.

This patch changes to_xfer_partial's len's type to ULONGEST, and
adjust its implementations.

gdb:

2014-01-14  Yao Qi  <yao@codesourcery.com>

* target.h (target_xfer_partial_ftype): Update.
(struct target_ops) <to_xfer_partial>: Change 'len' type to
ULONGEST.
* aix-thread.c (aix_thread_xfer_partial): Change type of
argument 'len' to ULONGEST.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv): Likewise.
(memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
'%u'.
(darwin_read_dyld_info): Likewise.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
instead of plongest.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
(ia64_hpux_xfer_partial): Likewise.
* ia64-linux-nat.c (ia64_linux_xfer_partial):
* inf-ptrace.c (inf_ptrace_xfer_partial):
* inf-ttrace.c (inf_ttrace_xfer_partial):
* linux-nat.c (linux_xfer_siginfo): Likewise.
(linux_nat_xfer_partial): Likewise.
(spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
(linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
instead of plongest.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_xfer_partial): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
declaration.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* target.c (target_read_live_memory): Likewise.
(memory_xfer_live_readonly_partial): Likewise.
(memory_xfer_partial, memory_xfer_partial_1): Likewise.
(target_xfer_partial, default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.  Call
pulongest instead of plongest.
(windows_xfer_partial): Likewise.
(windows_xfer_shared_libraries): Likewise.

Use target_xfer_partial_ftype for rs6000_xfer_shared_libraries

Hi,
We can use target_xfer_partial_ftype here for
rs6000_xfer_shared_libraries declaration.

gdb:

2014-01-14  Yao Qi  <yao@codesourcery.com>

* rs6000-nat.c (rs6000_xfer_shared_libraries): Use
target_xfer_partial_ftype.

* lib/ld-lib.exp (default_ld_link): Remove support for ldflags.
(default_ld_simple_link): Likewise.

PR gas/16434
* config/tc-z80.c (wrong_match): Provide format string to
as_warn.
(parse_exp_not_indexed): Delete unused variable dummy.
(emit_byte): Delete unused variable fixp.

Use bitpos and type to lookup a gdb.Field object when its name is 'None'.

PR python/15464
PR python/16113
* valops.c (value_struct_elt_bitpos): New function
* py-type.c (convert_field): Set 'name' attribute of a gdb.Field
object to 'None' if the field name is an empty string ("").
* python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
attribute to look for a field when 'name' is 'None'.
(get_field_type): New function

testsuite/
* gdb.python/py-type.c: Enhance test case.
* gdb.python/py-value-cc.cc: Likewise
* gdb.python/py-type.exp: Add new tests.
* gdb.python/py-value-cc.exp: Likewise

PR symtab/16426

* dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
(try_open_dwop_file): Ditto.
* gdb_bfd.c: #include "vec.h".
(bfdp): New typedef.
(struct gdb_bfd_data): New member included_bfds.
(gdb_bfd_unref): Unref all included bfds.
(gdb_bfd_record_inclusion): New function.
* gdb_bfd.h (gdb_bfd_record_inclusion): Declare.

daily update

remove obsolete declaration

deprecated_core_resize_section_table is declared but never defined.
This patch removes the stale declaration.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* gdbcore.h (deprecated_core_resize_section_table): Remove.

remove use_windows

Nothing actually uses use_windows, not even Insight.  So, this patch
removes it.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* defs.h (use_windows): Remove.
* gdb.c (main): Update.
* main.c (captured_main, gdb_main): Update.
* main.h (struct captured_main_args) <use_windows>: Remove.
* top.c (use_windows): Remove.

remove unused deprecated_flush_hook declaration

deprecated_flush_hook is declared in defs.h but never defined.
This patch removes the stale declaration.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* defs.h (deprecated_flush_hook): Remove.

Fix set auto-load safe-path false warning regression (PR 16216)

gdb/
2014-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

PR threads/16216
* linux-thread-db.c (try_thread_db_load): Add parameter
check_auto_load_safe.  Move here the file_is_auto_load_safe call.
(try_thread_db_load_from_pdir_1): Move it there from here.
(try_thread_db_load_from_sdir): Update caller.
(try_thread_db_load_from_dir): Move it there from here.

Have regdat.sh always rewrite the output register file

The rules for generating the output register files look like:

amd64.c : $(srcdir)/../regformats/i386/amd64.dat $(regdat_sh)
$(SHELL) $(regdat_sh) $(srcdir)/../regformats/i386/amd64.dat amd64.c

According to this rule, if regdat.sh is newer than amd64.c, then
regdat.sh shall be invoked on amd64.dat.  According to regdat.sh, if the
script determines that the output file amd64.c has not changed, then it
will not overwrite the existing output file.  This means that a
subsequent invocation of make will trigger the above rule again as
regdat.sh will be perpetually newer than amd64.c.

This then shows up in the make output like so:

/bin/bash ./../regformats/regdat.sh ./../regformats/i386/amd64-linux.dat amd64-linux.c
amd64-linux.c unchanged.
/bin/bash ./../regformats/regdat.sh ./../regformats/i386/amd64-avx-linux.dat amd64-avx-linux.c
amd64-avx-linux.c unchanged.
...

To fix this pathological behavior, it suffices to have regdat.sh
unconditionally rewrite the output register file.

On my machine, which has a regdat.sh file that is newer than some of the
input register files, this change speeds up every invocation of make
under gdb/ by about 5 seconds.

New "make check-headers" rule.

Tries to compile each header in isolation, thus ensuring headers are
self-contained.

Defaults to checking all $HFILES_NO_SRCDIR headers.

Do:

  make check-headers CHECK_HEADERS="header.h list.h"

to check specific headers.

gdb/
2014-01-13  Pedro Alves  <palves@redhat.com>

        * Makefile.in (CHECK_HEADERS): New variable.
        (check-headers:): New rule.

remove deprecated_set_hook

This removes deprecated_set_hook.  Insight was the last user of this
hook, but I recently checked in a patch to have it use the
command_param_changed observer instead.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* cli/cli-setshow.c (do_set_command): Update.
* defs.h (deprecated_set_hook): Remove.
* top.c (deprecated_set_hook): Remove.

Fix MinGW compilation errors in gdbserver/.

gdb/gdbserver/Makefile.in (INCLUDE_CFLAGS): Remove trailing slash from
"-I$(srcdir)/../".  Fixes MinGW compilation errors with old GCC versions.

2014-01-13  Ma Jiang  <ma.jiang@zte.com.cn>

PR ld/16202
* elf32-arm.c (elf32_arm_final_link_relocate): Refetch addends for
R_ARM_ABS8 and R_ARM_ABS16.

tfile: Don't infer the PC from the tracepoint if the PC is a pseudo-register.

This PC guessing can't work when the PC is a pseudo-register.
Pseudo-register values don't end up stored in the regcache, they're
always recomputed.  And, it's actually wrong to try to write a
pseudo-register with regcache_raw_supply.  Skip it and add a comment.

gdb/
2014-01-13  Pedro Alves  <palves@redhat.com>

* tracepoint.c (tfile_fetch_registers): Don't infer the PC from
the tracepoint if the PC is a pseudo-register.

replace XCALLOC with XCNEWVEC or XCNEW

This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.

replace XMALLOC with XNEW

This replaces XMALLOC with XNEW, and removes XMALLOC.  The only
non-mechanical bit here was remembering to edit gdbarch.sh.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* defs.h (XMALLOC): Remove.
* avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cli-out.c (struct ui_out *): Likewise.
* cli/cli-dump.c (add_dump_command): Likewise.
(add_dump_command): Likewise.
* complaints.c (get_complaints): Likewise.
(find_complaint): Likewise.
* dwarf2-frame.c (execute_cfa_program): Likewise.
* dwarf2read.c (abbrev_table_read_table): Likewise.
* gdbarch.sh: Likewise.
* gdbarch.c: Rebuild.
* inf-ttrace.c (inf_ttrace_add_page): Likewise.
* interps.c (interp_new): Likewise.
* lm32-tdep.c (lm32_gdbarch_init): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* mi/mi-console.c (mi_console_file_new): Likewise.
* mi/mi-interp.c (mi_interpreter_init): Likewise.
* mi/mi-out.c (mi_out_new): Likewise.
* mi/mi-parse.c (mi_parse): Likewise.
* microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* observer.c (xalloc_observer_list_node): Likewise.
* regcache.c (regcache_xmalloc_1): Likewise.
* reggroups.c (reggroup_new): Likewise.
(_initialize_reggroup): Likewise.
* registry.c (register_data_with_cleanup): Likewise.
* remote.c (remote_notif_stop_alloc_reply): Likewise.
* ser-base.c (serial_ttystate): Likewise.
* ser-mingw.c (make_pipe_state): Likewise.
* ser-pipe.c (pipe_open): Likewise.
* serial.c (serial_open): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-file.c (tui_file_new): Likewise.
* tui/tui-out.c (tui_out_new): Likewise.
* ui-file.c (mem_file_new): Likewise.
* ui-out.c (push_level): Likewise.
(make_cleanup_ui_out_end): Likewise.
(append_header_to_list): Likewise.
(ui_out_new): Likewise.
* user-regs.c (user_reg_add_builtin): Likewise.

replace XZALLOC with XCNEW

This replaces XZALLOC with XCNEW and removes XZALLOC.
This change is purely mechanical.

2014-01-13  Tom Tromey  <tromey@redhat.com>

* defs.h (XZALLOC): Remove.
* ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* auto-load.c (get_auto_load_pspace_data): Likewise.
* auxv.c (get_auxv_inferior_data): Likewise.
* bfd-target.c (target_bfd_reopen): Likewise.
* breakpoint.c (get_catch_syscall_inferior_data): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
* bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
* corelow.c (core_open): Likewise.
* darwin-nat.c (darwin_check_new_threads): Likewise.
(darwin_attach_pid): Likewise.
* dummy-frame.c (dummy_frame_push): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
* eval.c (ptrmath_type_p): Likewise.
* exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
* gdbtypes.c (alloc_type_arch): Likewise.
(alloc_type_instance): Likewise.
* hppa-tdep.c (hppa_gdbarch_init): Likewise.
* inf-child.c (inf_child_can_use_agent): Likewise.
* inflow.c (get_inflow_inferior_data): Likewise.
* infrun.c (save_infcall_suspend_state): Likewise.
* jit.c (jit_reader_load): Likewise.
(get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_open_impl): Likewise.
(jit_symtab_open_impl): Likewise.
(jit_block_open_impl): Likewise.
(jit_frame_sniffer): Likewise.
* linux-fork.c (add_fork): Likewise.
* maint.c (make_command_stats_cleanup): Likewise.
* objfiles.c (get_objfile_pspace_data): Likewise.
* opencl-lang.c (struct lval_closure): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
* progspace.c (new_address_space): Likewise.
(add_program_space): Likewise.
* remote-sim.c (get_sim_inferior_data): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* skip.c (Ignore): Likewise.
(skip_delete_command): Likewise.
* solib-aix.c (get_solib_aix_inferior_data): Likewise.
(library_list_start_library): Likewise.
(solib_aix_current_sos): Likewise.
* solib-darwin.c (get_darwin_info): Likewise.
(darwin_current_sos): Likewise.
* solib-dsbt.c (get_dsbt_info): Likewise.
* solib-ia64-hpux.c (new_so_list): Likewise.
(ia64_hpux_get_solib_linkage_addr): Likewise.
* solib-spu.c (append_ocl_sos): Likewise.
(spu_current_sos): Likewise.
* solib-svr4.c (get_svr4_info): Likewise.
(svr4_keep_data_in_core): Likewise.
(library_list_start_library): Likewise.
(svr4_default_sos): Likewise.
(svr4_read_so_list): Likewise.
* solib-target.c (library_list_start_library): Likewise.
(solib_target_current_sos): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* symfile-debug.c (install_symfile_debug_logging): Likewise.
* symfile.c (default_symfile_segments): Likewise.
* target-descriptions.c (tdesc_data_init): Likewise.
(tdesc_create_reg): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_set_struct_size): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_free_feature): Likewise.
(tdesc_create_feature): Likewise.
* windows-nat.c (windows_add_thread): Likewise.
(windows_make_so): Likewise.
* xml-support.c (gdb_xml_body_text): Likewise.
(gdb_xml_create_parser_and_cleanup): Likewise.
(xml_process_xincludes): Likewise.
* xml-syscall.c (allocate_syscalls_info): Likewise.
(syscall_create_syscall_desc): Likewise.

missing changelog for last patch

Error on shared lib call to @local ifunc

On powerpc32, making ifuncs have non-default visibility in shared
libraries or pies can result in runtime failures.  The problem is that
if gcc is told that a given function has non-default visibility, then
calls to that function are assumed to be local (which is true) and
thus need not go via a plt call stub (which is false for ifunc).  If
the caller has no other reason to set up the got pointer (r30), code
won't be emitted to do so.  However, a pic plt call stub makes use of
r30 to load the plt entry.  So a call to an ifunc, which always needs
a plt entry, will fail.

This patch makes ld emit an error for the problem case, and allows
calls to non-default visibility ifuncs to work in normal executables.
I also fix some cases where ifuncs fail when using the old bss-plt.

* elf32-ppc.c (ppc_elf_check_relocs): For @local call to ifunc,
error when shared and force a plt call otherwise.
(ppc_elf_size_dynamic_sections): Don't emit DT_PPC_GOT unless
plt_type == PLT_NEW.
(ppc_elf_relocate_section): Add missing test to resolve ifuncs to
the appropriate call stub.

daily update

Split i386_stap_parse_special_token into smaller functions

This patch reorganizes code on gdb/i386-tdep.c's SystemTap SDT probe
support functions.  Before it, the code to parse special operands on x86
lived in a single, big function.  This patch creates 2 new functions
that makes the code more organized and removes a few indentation levels
(which is always good IMO).

I haven't modified anything logical in the functions, i.e., there's still
one latent bug on i386_stap_parse_special_token_triplet now.  I will soon
post a patch to fix this, and to also improve the readability of the two
new functions.

2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>

* i386-tdep.c (i386_stap_parse_special_token_triplet): New
function, with code from i386_stap_parse_special_token.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
(i386_stap_parse_special_token): Move code to the two functions
above; simplify it.

daily update

daily update

[doc] Mention that "set environment" affects the shell too.

gdb/doc/
2014-01-10  Pedro Alves  <palves@redhat.com>

* gdb.texinfo (Your Program's Environment) <set environment>:
Mention the shell, and point at 'set exec-wrapper'.

Since upstream gcc has recently increased the function alignment on
S390, the dw2-dir-file-name test case fails in the first
gdb_continue_to_breakpoint.  Indeed, the breakpoint is now placed into
the alignment gap *before* the actual function.

This happens because the test case declares the respective "*_start"
symbol as a "loose" label before the function definition, and the
compiler inserts the alignment between that label and the function
itself.

The "*_start" symbols were only necessary because FUNC made the
function static.  The fix makes the functions extern instead, thus
making the "*_start" labels unnecessary.

testsuite/
2014-01-10  Andreas Arnez  <arnez@linux.vnet.ibm.com>
    Pedro Alves <palves@redhat.com>

* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
Make "name" extern.
* gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
references to ${name}_start by references to ${name}.

Don't adjust LOAD segment to match GNU_RELRO segment

Instead, fix Jakub's original code setting up the PR_GNU_RELRO header
from the PT_LOAD header.

PR ld/14207
PR ld/16322
PR binutils/16323
bfd/
* elf.c (assign_file_positions_for_load_sections): Revert last change.
(assign_file_positions_for_non_load_sections): When setting up
PT_GNU_RELRO header, don't require a corresponding PT_LOAD
header that completely covers the relro region.
ld/
* ldlang.c (lang_size_sections): Remove unneeded RELRO base
adjust.  Tidy comments.
* ld.texinfo (DATA_SEGMENT_RELRO_END): Correct description.
ld/testsuite/
* ld-x86-64/pr14207.d: Adjust

Remove path from gdb.ada/pp-rec-component.exp "source" test

gdb/testsuite/ChangeLog:

* gdb.ada/pp-rec-component.exp: Remove path from "source" test.

Remove path from gdb.python/py-pp-integral.exp "source" test.

gdb/testsuite/ChangeLog:

* gdb.python/py-pp-integral.exp: Remove path from "source" test.

* emulparams/crislinux.sh (COMMONPAGESIZE): Define.

daily update

gdb.mi/mi-info-os.exp: Fix cross-debugger testing

A live target is required for `-info-os' to work in non-native
configurations.

 (gdb)
 Expecting: ^(-info-os[
 ]+)?(.*\^done,OSDataTable=.*[
 ]+[(]gdb[)]
 [ ]*)
 -info-os
 ^error,msg="Don't know how to get OS data.  Try \"help target\"."
 (gdb)
 FAIL: gdb.mi/mi-info-os.exp: -info-os

If GDB does have a native configuration included, but we're testing
remote, it'll be worse, as if we're not connected yet, -info-os will
run against the default run target, and pass, falsely giving the
impression the remote bits were exercised.

gdb/testsuite/
2014-01-09  Maciej W. Rozycki  <macro@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

* gdb.mi/mi-info-os.exp: Connect to the target with
        mi_gdb_target_load.

Fix buffer underrun in i386-dis.c.

opcodes/
* i386-dis.c (print_insn): Do not touch all_prefixes[-1] when
last_rex_prefix is -1.

Handle the case of a remote target supporting target side commands, but not on software breakpoints.

Although we can tell upfront whether a remote target supports target
side commands, we can only tell whether the target supports that in
combination with a given breakpoint kind (software, hardware,
watchpoints, etc.) when we go and try to insert such a breakpoint kind
the first time.  It's not desirable to make remote_insert_breakpoint
simply return -1 in this case, because if the breakpoint was set in a
shared library, insert_bp_location will assume that the breakpoint
insertion failed because the library wasn't mapped in.

insert_bp_location already handles errors/exceptions thrown from the
target_insert_xxx methods, exactly so the backend can tell the user
the detailed reason the insertion of hw breakpoints failed.  But, in
the case of software breakpoints, it discards the detailed error
message.

So the patch makes insert_bp_location use the error's message for SW
breakpoints too, and, introduces a NOT_SUPPORTED_ERROR error code so
that insert_bp_location doesn't confuse the error for failure due to a
shared library disappearing.

The result is:

(gdb) c
Warning:
Cannot insert breakpoint 2: Target doesn't support breakpoints that have target side commands.

2014-01-09  Pedro Alves  <palves@redhat.com>
    Hui Zhu  <hui@codesourcery.com>

PR gdb/16101
* breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
bp_err_string.  Don't mark the location shlib_disabled if the
error thrown wasn't a generic or memory error.  Catch errors
thrown while inserting breakpoints in overlayed code.  Output
error message of software breakpoints.
* remote.c (remote_insert_breakpoint): If this breakpoint has
target-side commands but this stub doesn't support Z0 packets,
throw NOT_SUPPORTED_ERROR error.
* exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
* target.h (target_insert_breakpoint): Extend comment.
(target_insert_hw_breakpoint): Add comment.

Fix copyright year

Check if GNU_RELRO segment is is generated

Fail if GNU_RELRO segment isn't generated, but should.

* ld-elf/binutils.exp (binutils_test): Check if GNU_RELRO segment
is generated.

remove include/gdbm.h

include/gdbm.h is a relic.

2014-01-09  Tom Tromey  <tromey@redhat.com>

* gdbm.h: Remove.

Add and use check_lto_shared_available

2014-01-09  Vidya Praveen  <vidyapraveen@arm.com>

* lib/ld-lib.exp (check_lto_shared_available): New check.
* ld-plugin/lto.exp: Use check_lto_shared_available.

Use table jump macros in coff-rs6000 targets.

bfd/
2014-01-09  Tristan Gingold  <gingold@adacore.com>

* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.

daily update

GDBserver: Discard previous queued events when GDB disconnects.

... not when a new GDB connection sends the status packet ('?').
Mainly just a cleanup/simplification, as GDB always sends '?' first.

Tested on x86_64 Fedora 17.

2014-01-08  Pedro Alves  <palves@redhat.com>

* server.c (handle_status): Don't discard previous queued stop
replies or thread's pending status here.
(main) <disconnection>: Do it here instead.

[remote/gdbserver] Don't lose signals when reconnecting.

Currently, when GDB connects in all-stop mode, GDBserver always
responds to the status packet with a GDB_SIGNAL_TRAP, even if the
program is actually stopped for some other signal.

 (gdb) tar rem ...
 ...
 (gdb) c
 Program received signal SIGUSR1, User defined signal 1.
 (gdb) disconnect
 (gdb) tar rem ...
 (gdb) c

(Or a GDB crash instead of an explicit disconnect.)

This results in the program losing that signal on that last continue,
because gdb will tell the target to resume with no signal (to suppress
the GDB_SIGNAL_TRAP, due to 'handle SISGTRAP nopass'), and that will
actually suppress the real signal the program had stopped for
(SIGUSR1).  To fix that, I think we should make GDBserver report the
real signal the thread had stopped for in response to the status
packet:

 @item ?
 @cindex @samp{?} packet
 Indicate the reason the target halted.  The reply is the same as for
 step and continue.

But, that raises the question -- which thread are we reporting the
status for?  Due to how the RSP in all-stop works, we can only report
one status.  The status packet's response is a stop reply packet, so
it includes the thread identifier, so it's not a problem packet-wise.
However, GDBserver is currently always reporting the status for first
thread in the thread list, even though that may well not be the thread
that got the signal that caused the program to stop.  So the next
logical step would be to report the status for the
last_ptid/last_status thread (the last event reported to gdb), if it's
still around; and if not, fallback to some other thread.

There's an issue on the GDB side with that, though...

GDB currently always adds the thread reported in response to the
status query as the first thread in its list.  That means that if we
start with e.g.,

 (gdb) info threads
   3 Thread 1003 ...
 * 2 Thread 1002 ...
   1 Thread 1001 ...

And reconnect:

 (gdb) disconnect
 (gdb) tar rem ...

We end up with:

 (gdb) info threads
   3 Thread 1003 ...
   2 Thread 1001 ...
 * 1 Thread 1002 ...

Not a real big issue, but it's reasonably fixable, by having GDB
fetch/sync the thread list before fetching the status/'?', and then
using the status to select the right thread as current on the GDB
side.  Holes in the thread numbers are squashed before/after
reconnection (e.g., 2,3,5 becomes 1,2,3), but the order is preserved,
which I think is both good, and good enough.

However (yes, there's more...), the previous GDB that was connected
might have had gdbserver running in non-stop mode, or could have left
gdbserver doing disconnected tracing (which also forces non-stop), and
if the new gdb/connection is in all-stop mode, we can end up with more
than one thread with a signal to report back to gdb.  As we can only
report one thread/status (in the all-stop RSP variant; the non-stop
variant doesn't have this issue), we get to do what we do at every
other place we have this situation -- leave events we can't report
right now as pending, so that the next resume picks them up.

Note all this ammounts to a QoI change, within the existing framework.
There's really no RSP change here.

The only user visible change (other than that the signal is program is
stopped at isn't lost / is passed to the program), is in "info
program", that now can show the signal the program stopped for.  Of
course, the next resume will respect the pass/nopass setting for the
signal in question.  It'd be reasonable to have the initial connection
tell the user the program was stopped with a signal, similar to when
we load a core to debug, but I'm leaving that out for a future change.
I think we'll need to either change how handle_inferior_event & co
handle stop_soon, or maybe bypass them completely (like
fork-child.c:startup_inferior) for that.

Tested on x86_64 Fedora 17.

gdb/gdbserver/
2014-01-08  Pedro Alves  <palves@redhat.com>

* gdbthread.h (struct thread_info) <status_pending_p>: New field.
* server.c (visit_actioned_threads, handle_pending_status): New
function.
(handle_v_cont): Factor out parts to ...
(resume): ... this new function.  If in all-stop, and a thread
being resumed has a pending status, report it without actually
resuming.
(myresume): Adjust to use the new 'resume' function.
(clear_pending_status_callback, set_pending_status_callback)
(find_status_pending_thread_callback): New functions.
(handle_status): Handle the case of multiple threads having
interesting statuses to report.  Report threads' real last signal
instead of always reporting GDB_SIGNAL_TRAP.  Look for a thread
with an interesting thread to report the status for, instead of
always reporting the status of the first thread.

gdb/
2014-01-08  Pedro Alves  <palves@redhat.com>

* remote.c (remote_add_thread): Add threads silently if starting
up.
(remote_notice_new_inferior): If in all-stop, and starting up,
don't call notice_new_inferior.
(get_current_thread): New function, factored out from ...
(add_current_inferior_and_thread): ... this.  Adjust.
(remote_start_remote) <all-stop>: Fetch the thread list.  If we
found any thread, then select the remote's current thread as GDB's
current thread too.

gdb/testsuite/
2014-01-08  Pedro Alves  <palves@redhat.com>

* gdb.threads/reconnect-signal.c: New file.
* gdb.threads/reconnect-signal.exp: New file.

Remove regbnd and vec_disp8

* config/tc-i386.c (regbnd): Removed.
(vec_disp8): Likewise.

Adjust LOAD segment to generate GNU_RELRO segment

This patch fixes 2 GNU_RELRO segment bugs:

1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment.  This is

https://sourceware.org/bugzilla/show_bug.cgi?id=14207

We "fixed" ld by not generating GNU_RELRO segment.  This patch
adjusts LOAD segment to generate GNU_RELRO segment.  It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.

bfd/

PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.

ld/

PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.

ld/testsuite/

PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.

* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.

Update copyright year to 2014

binutils/

* version.c (print_version): Update copyright year to 2014.

gas/

* as.c (parse_args): Update copyright year to 2014.

gold/

* version.cc (print_version): Update copyright year to 2014.

ld/

* ldver.c (ldversion): Update copyright year to 2014.

opcodes/

* i386-gen.c (process_copyright): Update copyright year to 2014.

New Year - binutils ChangeLog rotation

Update NEWS post GDB 7.7 branch creation.

gdb/ChangeLog:

* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.

Bump version to 7.7.50.DATE-cvs.

Now that the GDB 7.7 branch has been created, we can
bump the version number.

gdb/ChangeLog:

GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
* version.in: Bump version to 7.7.50.DATE-cvs.

Add missing ChangeLog entries.

Fix pointer assignment with different signedness

This patch fixes these errors below:

../../binutils-gdb/gdb/spu-linux-nat.c: In function ‘spu_symbol_file_add_from_memory’:
../../binutils-gdb/gdb/spu-linux-nat.c:368:3: error: pointer targets in passing argument 2 of ‘spu_proc_xfer_spu’ differ in signedness [-Werror=pointer-sign]
../../binutils-gdb/gdb/spu-linux-nat.c:232:1: note: expected ‘gdb_byte *’ but argument is of type ‘char *’
../../binutils-gdb/gdb/spu-linux-nat.c: In function ‘spu_xfer_partial’:
../../binutils-gdb/gdb/spu-linux-nat.c:598:7: error: pointer targets in passing argument 1 of ‘strtoulst’ differ in signedness [-Werror=pointer-sign]
In file included from ../../binutils-gdb/gdb/defs.h:769:0,
                 from ../../binutils-gdb/gdb/spu-linux-nat.c:21:
../../binutils-gdb/gdb/utils.h:43:15: note: expected ‘const char *’ but argument is of type ‘gdb_byte *’

gdb:

2014-01-08  Yao Qi  <yao@codesourcery.com>

* spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
(spu_xfer_partial): Cast 'buf' to 'const char *'.