Merge branch 'topic/aloop' into topic/misc

Merge branch 'topic/isa' into topic/misc

ALSA: usb: USB3 SuperSpeed sound support

This is V2 of the patch, after feedback from Clemens and Daniel.

This patch adds SuperSpeed support to the USB drivers under sound/. It adds
tests for USB_SPEED_SUPER to the appropriate places that check for the USB
speed.

This patch has been tested with our SS USB3 device emulating a set of Yamaha
speakers and a Logitech microphone, but with the descriptors modified to add
USB3 support. It has also been tested with the real speakers and microphone,
to make sure that USB2 devices still work.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ISA: Remove snd-sgalaxy

Its hardware is handled more fully by the new azt1605/azt2316 drivers.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ISA: New Aztech Sound Galaxy driver

This is a new driver for Aztech Sound Galaxy ISA soundcards based on the
AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers
for either chipset generated from the same source file, with (very)
minimal ifdeffery.

The drivers check the SB DSP version to decide if they are being loaded
for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1.
This isn't full-proof as the DSP version can actually be set through
software but it's close enough -- as far as I've been able to see, the
DSP version can not be stored in the EEPROM and the cards will therefore
startup with the defaults.

This distinction could (with the same success rate) also be used to
decide which chip we're looking at at runtime meaning a single, merged
driver is also an option but I feel it's actually nicer this way. A
merged driver would have to postpone translating the passed in resource
values to the card configuration until it knew which one it was looking
at and would need to postpone erring out on mpu_irq=10 for azt1605 and
mpu_irq=3 for azt2316.

The drivers have been tested on various cards. For snd-azt1605:

FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra
FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II

and for snd-azt2316:

FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB
FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201)
FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202)
FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069
FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300)
FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301)
FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D

826 and 846 were also marketed directly by Aztech and then known as:

FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+
FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D

Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S
chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full
duplex is a little flaky on some.

I38-MSN811 tends to not work in full-duplex but sometimes does with the
highest success rate being achieved when you first start the capture and
then a playback instead of the other way around (it's a CS4231-KL
codec).

The cards with an AD1845XP codec (my I38-MMSN826 and one of my
I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex
works, sometimes not and this varies from try to try. This seems likely
to be a timing problem somewhere inside wss-lib.

I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth
onboard that isn't supported yet. The wavetable synths on I38-MMSN847
and I38-MMSN852 are wired directly to the standard MPU-401 UART and the
AUX1 input on the codec and work without problem.

CD-ROM audio on the cards is routed to the codec "Line" input, Line-In
to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename
the controls due to the capture source enumeration: I see that
capture-source overrides are hardcoded in wss-lib and this is just too
ugly to live.

Versus the old snd-sgalaxy driver these drivers add support for the
models without a configuration EEPROM (which are common), full-duplex,
MPU-401 UART and OPL3. In the future they might grow support for that
ICS2115 WaveFront synth on 826 and an hwdep interface to write to the
EEPROM on the models that have one.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound: oss: sh_dac_audio.c removed duplicated #include

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/asoc' into for-linus

Merge branch 'topic/misc' into for-linus

ASoC: add AD1980 obsolete information

This codec has been obsoleted by ADI, so add appropriate warnings to the
source tree to dissuade people from using in new designs based on driver
support.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: register cache should be 1 byte aligned for 1 byte long register

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

ALSA: hda - Adding support for new IDT 92HD87XX codecs

Added the entries for 92HD87B1/3 and 92HD87B2/4 codecs.
These are compatible with existing 83xxx codecs.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Fix inverted mute controls for WM8580

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

ALSA: HDA: Use model=auto for LG R510

Two users report model=auto is needed to make the internal mic work properly.
BugLink: https://bugs.launchpad.net/bugs/495134
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda - Update model entries in HD-Audio-Models.txt

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda: document VIA models

Add documentation about the autodetection of the VIA codec models to
avoid the false impression that they are not supported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda - patch_nvhdmi.c: Add missing codec IDs, unify names

* Add missing codec IDs.
* Modify some existing codec names for discrete GPUs to match newly
  added IDs. Note: existing names were a mixture of marketing and
  engineering GPU names. Equally, there's no reason that codec IDs
  have to be specific to a particular GPU or board, so identify
  codecs in a less marketing-oriented fashion.
* Reformat codec ID table so it's easier to read, for me at least.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits)
  igbvf.txt: Add igbvf Documentation
  igb.txt: Add igb documentation
  e100/e1000*/igb*/ixgb*: Add missing read memory barrier
  ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG
  netxen: protect tx timeout recovery by rtnl lock
  isdn: gigaset: use after free
  isdn: gigaset: add missing unlock
  solos-pci: Fix race condition in tasklet RX handling
  pkt_sched: Fix sch_sfq vs tcf_bind_filter oops
  net: disable preemption before call smp_processor_id()
  tcp: no md5sig option size check bug
  iwlwifi: fix locking assertions
  iwlwifi: fix TX tracer
  isdn: fix information leak
  net: Fix napi_gro_frags vs netpoll path
  usbnet: remove noisy and hardly useful printk
  rtl8180: avoid potential NULL deref in rtl8180_beacon_work
  ath9k: Remove myself from the MAINTAINERS list
  libertas: scan before assocation if no BSSID was given
  libertas: fix association with some APs by using extended rates
  ...

Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  tx493xide: use min_t() macro instead of min()
  drivers/ide: Use memdup_user
  via82cxxx: fix typo for VT6415 PCIE PATA IDE Host Controller support.
  ide-cd: Do not access completed requests in the irq handler

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Update defconfig.
  sparc: Kill user copy check code.
  sparc64: Fix perf_arch_get_caller_regs().
  sparc64: Add missing ID to parport probing code.

Merge branch 'rs485fix' of git://www.jni.nu/cris

* 'rs485fix' of git://www.jni.nu/cris:
  CRIS: ioctl for getting RS485 information

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: fix build with make 3.82
  Revert "Input: appletouch - fix integer overflow issue"
  memblock: Fix memblock_is_region_reserved() to return a boolean
  powerpc: Trim defconfigs
  powerpc: fix i8042 module build error
  sound/soc: mpc5200_psc_ac97: Use gpio pins for cold reset
  powerpc/5200: add mpc5200_psc_ac97_gpio_reset

Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits)
  Blackfin: gpio: add a debounce stub
  Blackfin: update defconfigs
  Blackfin: remove CONFIG_MEM_GENERIC_BOARD
  Blackfin: dpmc: punt unnecessary RTC_ISTAT clearing
  Blackfin: unify rotary encoder bitmasks
  Blackfin: unify SDH/RSI bitmasks
  Blackfin: BF54x: tweak DMAC MMR naming to match other ports
  Blackfin: TWI: clean up the MMR names
  Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpers
  Blackfin: add support for dynamic ftrace
  Blackfin: add support for LZO compressed kernels
  Blackfin: portmux: fix peripheral map overflow when requesting pins
  Blackfin: document SPI CS limitations with CPHA=0
  Blackfin: remove useless and outdated documentation
  Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options
  Blackfin: gpio/portmux: clean up whitespace corruption
  Blackfin: make sure mmiowb inserts a write barrier with SSYNC
  Blackfin: fix DMA/cache bug when resuming from suspend to RAM
  Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin)
  Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS
  ...

Merge branch 'next' of git://git./linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits)
  DMAENGINE: at_hdmac: locking fixlet
  DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l
  dma: dmatest: fix potential sign bug
  ioat2: catch and recover from broken vtd configurations v6
  DMAENGINE: add runtime slave control to COH 901 318 v3
  DMAENGINE: add runtime slave config to DMA40 v3
  DMAENGINE: generic slave channel control v3
  dmaengine: Driver for Topcliff PCH DMA controller
  intel_mid: Add Mrst & Mfld DMA Drivers
  drivers/dma: Eliminate a NULL pointer dereference
  dma/timb_dma: compile warning on 32 bit
  DMAENGINE: ste_dma40: support older silicon
  DMAENGINE: ste_dma40: support disabling physical channels
  DMAENGINE: ste_dma40: no disabled phy channels on ux500
  DMAENGINE: ste_dma40: fix suspend bug
  DMAENGINE: ste_dma40: add DB8500 memcpy channels
  DMAENGINE: ste_dma40: no flow control on memcpy
  DMAENGINE: ste_dma40: arch updates for LCLA and LCPA
  DMAENGINE: ste_dma40: allocate LCLA dynamically
  DMAENGINE: ste_dma40: no premature stop
  ...

Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c

drivers/char/vt.c:vc_do_resize(): local var `end' should be unsigned long

According include/linux/console_struct.h,vc_scr_end is unsigned long.

struct vc_data {
    unsigned short  vc_num;         /* Console number */
    unsigned int    vc_cols;        /* [#] Console size */
    unsigned int    vc_rows;
    unsigned int    vc_size_row;        /* Bytes per row */
    unsigned int    vc_scan_lines;      /* # of scan lines */
    unsigned long   vc_origin;      /* [!] Start of real screen */
    unsigned long   vc_scr_end;     /* [!] End of real screen */
    unsigned long   vc_visible_origin;  /* [!] Top of visible window */
    unsigned int    vc_top, vc_bottom;  /* Scrolling region */
    const struct consw *vc_sw;
    unsigned short  *vc_screenbuf;
...
}

Signed-off-by: qiaochong <qiaochong@loongson.cn>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/vt.c: fix vc->vc_origin on take_over_console()

kernel will die on some platform when switch from vga mode to framebuffer
mode.  The reason of this bug is that bind_con_driver reset vc->vc_origin
to (unsigned long)vc->vc_screenbuf.

On vgacon vc->vc_origin is not releated to vc->vc_screenbuf,if set
vc->vc_origin to vc->vc_screenbuf,kernel will die on vc_do_resize.

static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
        struct vc_data *vc, unsigned int cols, unsigned int lines)
{
    unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
    unsigned int old_cols, old_rows, old_row_size, old_screen_size;
    unsigned int new_cols, new_rows, new_row_size, new_screen_size;
    unsigned int end, user;
...
        end = (old_rows > new_rows) ? old_origin +
            (old_row_size * new_rows) :
            vc->vc_scr_end;

...
/*
here for a test from vgacon to framebuffer:
old_origin=0x810814a0,end=0xb00b8fa0,vc->vc_origin=0x810814a0
the code bellow will copy memory from 0x810814a0 to 0xb00b8fa0,
this will cover kernel code,kernel died here.
*/

    while (old_origin < end) {

        scr_memcpyw((unsigned short *) new_origin,
                (unsigned short *) old_origin, rlth);
        if (rrem)
            scr_memsetw((void *)(new_origin + rlth),
                    vc->vc_video_erase_char, rrem);
        old_origin += old_row_size;
        new_origin += new_row_size;
    }

...
}

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: qiaochong <qiaochong@loongson.cn>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: smaller wrappers around rwsem_down_failed_common

More code can be pushed from rwsem_down_read_failed and
rwsem_down_write_failed into rwsem_down_failed_common.

Following change adding down_read_critical infrastructure support also
enjoys having flags available in a register rather than having to fish it
out in the struct rwsem_waiter...

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: wake queued readers when writer blocks on active read lock

This change addresses the following situation:

- Thread A acquires the rwsem for read
- Thread B tries to acquire the rwsem for write, notices there is already
  an active owner for the rwsem.
- Thread C tries to acquire the rwsem for read, notices that thread B already
  tried to acquire it.
- Thread C grabs the spinlock and queues itself on the wait queue.
- Thread B grabs the spinlock and queues itself behind C. At this point A is
  the only remaining active owner on the rwsem.

In this situation thread B could notice that it was the last active writer
on the rwsem, and decide to wake C to let it proceed in parallel with A
since they both only want the rwsem for read.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: let RWSEM_WAITING_BIAS represent any number of waiting threads

Previously each waiting thread added a bias of RWSEM_WAITING_BIAS.  With
this change, the bias is added only once to indicate that the wait list is
non-empty.

This has a few nice properties which will be used in following changes:
- when the spinlock is held and the waiter list is known to be non-empty,
  count < RWSEM_WAITING_BIAS  <=>  there is an active writer on that sem
- count == RWSEM_WAITING_BIAS  <=>  there are waiting threads and no
                                     active readers/writers on that sem

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: lighter active count checks when waking up readers

In __rwsem_do_wake(), we can skip the active count check unless we come
there from up_xxxx().  Also when checking the active count, it is not
actually necessary to increment it; this allows us to get rid of the read
side undo code and simplify the calculation of the final rwsem count
adjustment once we've counted the reader threads to wake.

The basic observation is the following.  When there are waiter threads on
a rwsem and the spinlock is held, other threads can only increment the
active count by trying to grab the rwsem in down_xxxx().  However
down_xxxx() will notice there are waiter threads and take the down_failed
path, blocking to acquire the spinlock on the way there.  Therefore, a
thread observing an active count of zero with waiters queued and the
spinlock held, is protected against other threads acquiring the rwsem
until it wakes the last waiter or releases the spinlock.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: fully separate code paths to wake writers vs readers

This is in preparation for later changes in the series.

In __rwsem_do_wake(), the first queued waiter is checked first in order to
determine whether it's a writer or a reader.  The code paths diverge at
this point.  The code that checks and increments the rwsem active count is
duplicated on both sides - the point is that later changes in the series
will be able to independently modify both sides.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: f71882fg: add support for the Fintek F71808E

Allow device probing to recognise the Fintek F71808E.

Sysfs interface:
 * Fan/pwm control is the same as for F71889FG
 * Temperature and voltage sensor handling is largely the same as for
   the F71889FG
  - Has one temperature sensor less (doesn't have temp3)
  - Misses one voltage sensor (doesn't have V6, thus in6_input refers to
    what in7_input refers for F71889FG)

For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up
such that it can largely be reused.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/coretemp.c: remove unneeded #ifdef CONFIG_HOTPLUG_CPU

register_hotcpu_notifier() is designed to make these ifdefs unnecessary.

Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: coretemp: documentation update and cleanup

Update coretemp supported CPU TjMax lists and some cleanup work.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: coretemp: enable coretemp device add operation failure

If one coretemp device can't be added, it should allow subsequent adding
operation because every new-added device will create a new sysfs group,
not an additional sensor sys entry.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: coretemp: update hotplug condition check

Fix two errors in hotplug.  One is for hotplug notifier.  The other is
unnecessary driver unregister.  Because even none of online cpus supports
coretemp, we can't assume new onlined cpu doesn't support it either.  If
related driver is unregistered there we have no chance to use coretemp
from then on.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: add support for JEDEC JC 42.4 compliant temperature sensors

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor

This driver adds support for the monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hmc6352: add driver for the HMC6352 compass

This driver will report the heading values in degrees to the sysfs
interface.  The values returned are headings .  e.g.  245.6

Alan: Cleanups requested now all folded in and a sysfs description to keep
Andrew happy. The sysfs description now resembles hwmon.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/hdaps.c: add Lenovo Thinkpad T400 to the whitelist

Add Lenovo Thinkpad T400.  I have done the testing on my laptop.  The
hdaps module detects the device and the hdapsd daemon is able to [un]park
the disk.

Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org>
Cc: Frank Seidel <frank@f-seidel.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix extraneous EXPORT_SYMBOL* warnings

These are caused by checkpatch incorrectly parsing its internal
representation of a statement block for struct's (or anything else that is
a statement block encapsulated in {}'s that also ends with a ';').  Fix
this by properly parsing a statement block.

An example:

+struct dummy_type dummy = {
+ .foo = "baz",
+};
+EXPORT_SYMBOL_GPL(dummy);
+
+static int dummy_func(void)
+{
+ return -EDUMMYCODE;
+}
+EXPORT_SYMBOL_GPL(dummy_func);

WARNING: EXPORT_SYMBOL(foo); should immediately \
follow its function/variable
#19: FILE: dummy.c:4:
+EXPORT_SYMBOL_GPL(dummy);

The above warning is issued when it should not be.

Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn about unexpectedly long msleep's

As explained in Documentation/timers/timers-howto.txt, msleep's of < 20ms
may sleep for as long as 20ms.  Caller's of msleep(1) or msleep(2), etc
are likely not to expect this quirky behavior - warn them.

Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: prefer usleep_range over udelay

When possible, sleeping is (usually) better than delaying; however, don't
bother callers of udelay < 10us, as those cases are generally not worth
the switch to usleep

[akpm@linux-foundation.org: fix mismatched parentheses]
Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add more exceptions to 80 char lines

Add new logging functions netdev_<level> and netif_<level>.
Don't complain if the only thing on a line is a quoted string.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: change externals to globals

Make error message say 'ERROR: do not initialise globals to 0 or NULL'
rather than 'ERROR: do not initialise externals to 0 or NULL'.  Makes more
sense in the context since there is an extern keyword in C and that is a
global declaration within the scope of the current file.

Signed-off-by: Joe Eloff <kagen101@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix handling of leading spaces

I've got a false positive when spaces are present at the beginning of a
line.

So I add this check, obviously excluding to check the lines in the middle of
comments.

For instance this code passes the checkpatch test:

+struct davinci_mcbsp_data {
+       unsigned int    fmt;
+    int             clk_div;
+};
+
+static struct davinci_mcbsp_data mcbsp_data;

Where, before the string "int             clk_div", I have 4 spaces (\040
ascii character).

With v2.6.34 scripts/checkpatch.pl script I get:

scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
total: 0 errors, 0 warnings, 201 lines checked
0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch has no obvious style
problems and is ready for submission.

That is not correct.  Instead with the proposed patch I get:

scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
WARNING: please, no space for starting a line,
                excluding comments
#63: FILE: sound/soc/davinci/davinci-i2s.c:165:
+    int             clk_div;$

WARNING: please, no space for starting a line,
                excluding comments
#95: FILE: sound/soc/davinci/davinci-i2s.c:406:
+    return 0;$

total: 0 errors, 2 warnings, 201 lines checked

That is correct.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: refactor 'allowed asm includes' and add memory.h

Change the check suggesting replacement of asm-includes with
linux-includes.  Exceptions to this rule are easier to extend now.  Add
memory.h because ARM has a custom one.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edd: fix possible memory leak in edd_init() error path

The error may happen at any iteration of the for loop, this patch properly
unregisters already registed edd_devices in error path.

[akpm@linux-foundation.org: remove unneeded NULL test]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

flex_array: add helpers to get and put to make pointers easy to use

Getting and putting arrays of pointers with flex arrays is a PITA.  You
have to remember to pass &ptr to the _put and you have to do weird and
wacky casting to get the ptr back from the _get.  Add two functions
flex_array_get_ptr() and flex_array_put_ptr() to handle all of the magic.

[akpm@linux-foundation.org: simplification suggested by Joe]
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: James Morris <jmorris@namei.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: vsprintf: useless strlen() removed

The strict_strtoul() and strict_strtoull() functions used strlen() to
check argument's length in a situation where it wasn't strictly necessary

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: "Yi Yang" <yi.y.yang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list debugging: warn when deleting a deleted entry

Use the magic LIST_POISON* values to detect an incorrect use of list_del
on a deleted entry.  This DEBUG_LIST specific warning is easier to
understand than the generic Oops message caused by LIST_POISON
dereference.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: orphan BEFS

This old address bounces and Sergey doesn't answer at another email
address.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sergey Kostyliov <rathamahata@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Laurent Pinchart email

Laurent is sending auto-replies with a new email address, so might as well
update MAINTAINERS.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update information about Linux Test Project maintainence

Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to WIMAX STACK

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to PS3VRAM DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jim Paris <jim@jtan.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove section PROMISE DC4030

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to OMAP USB

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to POWERPC EMBEDDED PPC8XX

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to DELL WMI EXTRAS

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to CRYPTOGRAPHIC RANDOM NUMBER GENERATOR

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update DRM DRIVERS patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add file patterns to UCLINUX FOR RENESAS H8/300

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove section STRIP

Commit f80a3f62383bf673c310926d55142d51f118926d ("Staging: strip: delete
the driver") removed it.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update SPEAR CLOCK FRAMEWORK SUPPORT file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove section SMX UIO Interface

Commit d6e976c0d258c9547a308bd8a9a82ec93e2bc6e2 ("UIO: Remove SMX
Cryptengine driver") removed the file.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update RICOH SMARTMEDIA/XD DRIVER file patterns

Entered as 822 (10 key typo?).

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update PPP OVER L2TP file patterns

Commit 21b4aaa14329db793832e865f15000c5c0192ac3 ("l2tp: Relocate pppol2tp
driver to new net/l2tp directory") moved the file.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update NETWORKING [WIRELESS] file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/ZIPIT Z2 SUPPORT file patterns

Use correct file location.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/VOIPAC PXA270 file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/NUVOTON W90X900 ARM ARCHITECTURE file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/BCMRING MTD NAND DRIVER file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-4.6: printk: use stable variable to dump kmsg buffer

kmsg_dump takes care to sample the global variables
inside a spinlock, but then goes on to use the same
variables outside the spinlock region too.

Use the correct variable. This will make the race
window smaller.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: remove WARN_ON for misc_deregister() failures

The previous change added WARN_ON() in misc_deregister().  So it is not
necessary to WARN_ON() misc_deregister() failure by callers.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: add WARN_ON() in misc_deregister()

misc_deregister() returns an error only when it attempts to unregister
the device that is not registered. This is the driver's bug.

Most of the drivers don't check the return value of misc_deregister().
(It is not bad thing because most of kernel *_unregister() API always
succeed and do not return value)

So it is better to indicate the error by WARN_ON() in misc_deregister().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stop_machine: struct cpu_stopper, remove alignment padding on 64 bits

Reorder elements in structure cpu_stopper to remove alignment padding on
64 bit builds, this shrinks its size from 40 to 32 bytes saving 8 bytes
per cpu.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86, ia64, smp: use workqueues unconditionally during do_boot_cpu()

Workqueues are now initialized as part of the early_initcall().  So they
are available for use during cold boot process aswell.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/main.c: mark do_one_initcall* as __init_or_module

Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/main.c: fix warning: 'calltime.tv64' may be used uninitialized

Using:

gcc (GCC) 4.5.0 20100610 (prerelease)

The following warning appears:

init/main.c: In function `do_one_initcall':
init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function

This warning is actually correct, as the global initcall_debug could
arguably be changed by the initcall.

Correct this warning by extracting a new function, do_one_initcall_debug,
that performs the initcall for the debug case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/range: remove unused definition of ARRAY_SIZE()

Remove duplicate definition of ARRAY_SIZE(), which was never used anyway.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sys_personality: remove the bogus checks in sys_personality()->__set_personality() path

Cleanup, no functional changes.

- __set_personality() always changes ->exec_domain/personality, the
  special case when ->exec_domain remains the same buys nothing but
  complicates the code. Unify both cases to simplify the code.

- The -EINVAL check in sys_personality() was never right. If we assume
  that set_personality() can fail we should check the value it returns
  instead of verifying that task->personality was actually changed.

  Remove it. Before the previous patch it was possible to hit this case
  due to overflow problems, but this -EINVAL just indicated the kernel
  bug.

OTOH, probably it makes sense to change lookup_exec_domain() to return
ERR_PTR() instead of default_exec_domain if the search in exec_domains
list fails, and report this error to the user-space.  But this means
another user-space change, and we have in-kernel users which need fixes.
For example, PER_OSF4 falls into PER_MASK for unkown reason and nobody
cares to register this domain.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Wenming Zhang <wezhang@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec

This driver adds support for the BMP085 digital pressure sensor from Bosch
Sensortec.  It exposes a sysfs api to userspace where pressure and
temperature measurement results can be read from the pressure0_input and
temp0_input file.  The chip is able to calculate the average of up to
eight samples to increase the accuracy.  This feature can be controlled by
writing to the oversampling file.

The BMP085 digital pressure sensor can measure ambient air pressure and
temperature.  Both values can be obtained from sysfs files.  The pressure
is measured by reading from pressure0_input.  Valid values range from
30000 to 110000 pascal with a resolution of 1 pascal (=0.01 millibar).

temp0_input holds the current temperature in degree celsius, multiplied by
10.  This results in a resolution of a tenth degree celsius.  Values range
from -400 to 850.

To increase the accuracy, this chip can calculate the average of 1, 2, 4
or 8 samples.  This behavior is controlled through the oversampling sysfs
file.  Two to the power of the value written to that file specifies how
many samples will be used.  Valid values: 0..3.

[akpm@linux-foundation.org: fix typo]
[shubhrajyoti@ti.com: optimize the wait time for the pressure sensor, definition of long is arch dependent so make it u32]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hpilo: fix pointer warning in ilo_ccb_setup

Fix i386 PAE compile warning:

drivers/misc/hpilo.c: In function `ilo_ccb_setup':
drivers/misc/hpilo.c:274: warning: cast to pointer from integer of different size

dma_addr_t is 64 on i386 PAE which causes a size mismatch.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: David Altobelli <david.altobelli@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc: ROHM BH1780GLI ambient light sensor driver

Add support for ROHM BH1780GLI Ambient light sensor.

BH1780 supports I2C interface.  Driver supports read/update of power state
and read of lux value (through SYSFS).  Writing value 3 to power_state
enables the sensor and current lux value could be read.

Currently this driver follows the same sysfs convention as supported by
drivers/misc/isl29003.c.

Signed-off-by: Hemanth V <hemanthv@ti.com>
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/mod/modpost.c: fix memory leak

sec2annotation returns malloc'ed buffer directly to printf as an argument.
 Free this buffer after printing.

Signed-off-by: Alexey Fomenko <ext-alexey.fomenko@nokia.com>
Cc: Trevor Keith <tsrk@tsrk.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iommu: inline iommu_num_pages

A profile of a network benchmark showed iommu_num_pages rather high up:

     0.52%  iommu_num_pages

Looking at the profile, an integer divide is taking almost all of the time:

      %
         :      c000000000376ea4 <.iommu_num_pages>:
    1.93 :      c000000000376ea4:       fb e1 ff f8     std     r31,-8(r1)
    0.00 :      c000000000376ea8:       f8 21 ff c1     stdu    r1,-64(r1)
    0.00 :      c000000000376eac:       7c 3f 0b 78     mr      r31,r1
    3.86 :      c000000000376eb0:       38 84 ff ff     addi    r4,r4,-1
    0.00 :      c000000000376eb4:       38 05 ff ff     addi    r0,r5,-1
    0.00 :      c000000000376eb8:       7c 84 2a 14     add     r4,r4,r5
   46.95 :      c000000000376ebc:       7c 00 18 38     and     r0,r0,r3
   45.66 :      c000000000376ec0:       7c 84 02 14     add     r4,r4,r0
    0.00 :      c000000000376ec4:       7c 64 2b 92     divdu   r3,r4,r5
    0.00 :      c000000000376ec8:       38 3f 00 40     addi    r1,r31,64
    0.00 :      c000000000376ecc:       eb e1 ff f8     ld      r31,-8(r1)
    1.61 :      c000000000376ed0:       4e 80 00 20     blr

Since every caller of iommu_num_pages passes in a constant power of two
we can inline this such that the divide is replaced by a shift. The
entire function is only a few instructions once optimised, so it is
a good candidate for inlining overall.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: fix warning: 'dirent' is used uninitialized in this function

Using:

gcc (GCC) 4.5.0 20100610 (prerelease)

The following warnings appear:

fs/readdir.c: In function `filldir64':
fs/readdir.c:240:15: warning: `dirent' is used uninitialized in this function
fs/readdir.c: In function `filldir':
fs/readdir.c:155:15: warning: `dirent' is used uninitialized in this function
fs/compat.c: In function `compat_filldir64':
fs/compat.c:1071:11: warning: `dirent' is used uninitialized in this function
fs/compat.c: In function `compat_filldir':
fs/compat.c:984:15: warning: `dirent' is used uninitialized in this function

The warnings are related to the use of the NAME_OFFSET() macro.  Luckily,
it appears as though the standard offsetof() macro is what is being
implemented by NAME_OFFSET(), thus we can fix the warning and use a more
standard code construct at the same time.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SubmittingPatches: add more about patch descriptions

Add more information about patch descriptions.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: remove unused NIPQUAD and NIPQUAD_FMT

There are no more uses of NIPQUAD or NIPQUAD_FMT.  Remove the definitions.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha/h8300/m68k: remove obsolete <asm/md.h> files

Removal of these started in 2.3.43pre3, ca. 10 years ago.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/compiler-gcc.h: use __same_type() in __must_be_array()

We should use the __same_type() helper in __must_be_array().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/io.h: add big endian versions of io{read,write}{16,32}

The asm-generic/iomap.h provides these functions already, but the
non-generic fallback defines do not.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/um/kernel/ptrace.c: remove dead PROC_MM

PROC_MM doesn't exist in Kconfig.  Looking around it looks like a
left-over from 2.6.0 or even 2.4 times, last mentioned in a fedora patch
for 2.6.10.  I believe it's time to get rid of that last tiny parts here
that are still around.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

um: call free_irq() only on enabled channels

When I use OpenSUSE-11.2 on UML (> 2.6.25)
I get lots of such errors:

Registering fd 1 twice
Irqs : 3, 3
Ids : 0x09cb41a0, 0x09cb4120
------------[ cut here ]------------
WARNING: at kernel/irq/manage.c:896 __free_irq+0x79/0x11a()
Trying to free already-free IRQ 3
Modules linked in:
09dadc6c:  [<081b2edb>] dump_stack+0x1c/0x20
09dadc84:  [<080716da>] warn_slowpath_common+0x49/0x77
09dadc9c:  [<08071772>] warn_slowpath_fmt+0x26/0x2a
09dadcb4:  [<08094e08>] __free_irq+0x79/0x11a
09dadce4:  [<08094ed6>] free_irq+0x2d/0x49
09dadcf4:  [<0805b4bc>] close_one_chan+0x70/0x9c
09dadd0c:  [<0805b833>] close_chan+0x17/0x22
09dadd1c:  [<0805bdda>] enable_chan+0x70/0x7c
09dadd3c:  [<0805cbb7>] line_open+0x34/0x9f
09dadd54:  [<0805b21e>] con_open+0x13/0x35
09dadd6c:  [<0814dc89>] tty_open+0x285/0x384
09dadda0:  [<080b754e>] chrdev_open+0xe0/0xf9
09daddc0:  [<080b3fb2>] __dentry_open+0xf3/0x1e2
09dadde4:  [<080b4142>] nameidata_to_filp+0x35/0x49
09daddfc:  [<080bd270>] do_last+0x409/0x50e
09dade28:  [<080bea04>] do_filp_open+0x175/0x446
09dadecc:  [<080b3d89>] do_sys_open+0x4a/0x128
09dadf04:  [<080b3ea2>] sys_open+0x19/0x21
09dadf28:  [<0805ab5a>] handle_syscall+0x7a/0x98
09dadf78:  [<08068441>] userspace+0x2c9/0x370
09dadfe0:  [<08058bb3>] fork_handler+0x53/0x5b
09dadffc:  [<00766564>] 0x766564

---[ end trace 9ebc1094aaf4bded ]---

This patch fixes the issue.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuidle: extend cpuidle and menu governor to handle dynamic states

On some SoC chips, HW resources may be in use during any particular idle
period.  As a consequence, the cpuidle states that the SoC is safe to
enter can change from idle period to idle period.  In addition, the
latency and threshold of each cpuidle state can vary, depending on the
operating condition when the CPU becomes idle, e.g.  the current cpu
frequency, the current state of the HW blocks, etc.

cpuidle core and the menu governor, in the current form, are geared
towards cpuidle states that are static, i.e.  the availabiltiy of the
states, their latencies, their thresholds are non-changing during run
time.  cpuidle does not provide any hook that cpuidle drivers can use to
adjust those values on the fly for the current idle period before the menu
governor selects the target cpuidle state.

This patch extends cpuidle core and the menu governor to handle states
that are dynamic.  There are three additions in the patch and the patch
maintains backwards-compatibility with existing cpuidle drivers.

1) add prepare() to struct cpuidle_device.  A cpuidle driver can hook
   into the callback and cpuidle will call prepare() before calling the
   governor's select function.  The callback gives the cpuidle driver a
   chance to update the dynamic information of the cpuidle states for the
   current idle period, e.g.  state availability, latencies, thresholds,
   power values, etc.

2) add CPUIDLE_FLAG_IGNORE as one of the state flags.  In the prepare()
   function, a cpuidle driver can set/clear the flag to indicate to the
   menu governor whether a cpuidle state should be ignored, i.e.  not
   available, during the current idle period.

3) add power_specified bit to struct cpuidle_device.  The menu governor
   currently assumes that the cpuidle states are arranged in the order of
   increasing latency, threshold, and power savings.  This is true or can
   be made true for static states.  Once the state parameters are dynamic,
   the latencies, thresholds, and power savings for the cpuidle states can
   increase or decrease by different amounts from idle period to idle
   period.  So the assumption of increasing latency, threshold, and power
   savings from Cn to C(n+1) can no longer be guaranteed.

It can be straightforward to calculate the power consumption of each
available state and to specify it in power_usage for the idle period.
Using the power_usage fields, the menu governor then selects the state
that has the lowest power consumption and that still satisfies all other
critieria.  The power_specified bit defaults to 0.  For existing cpuidle
drivers, cpuidle detects that power_specified is 0 and fills in a dummy
set of power_usage values.

Signed-off-by: Ai Li <aili@codeaurora.org>
Cc: Len Brown <len.brown@intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hibernation: freeze swap at hibernation

When taking a memory snapshot in hibernate_snapshot(), all (directly
called) memory allocations use GFP_ATOMIC.  Hence swap misusage during
hibernation never occurs.

But from a pessimistic point of view, there is no guarantee that no page
allcation has __GFP_WAIT.  It is better to have a global indication "we
enter hibernation, don't use swap!".

This patch tries to freeze new-swap-allocation during hibernation.  (All
user processes are frozenm so swapin is not a concern).

This way, no updates will happen to swap_map[] between
hibernate_snapshot() and save_image().  Swap is thawed when swsusp_free()
is called.  We can be assured that swap corruption will not occur.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix corruption of hibernation caused by reusing swap during image saving

Since 2.6.31, swap_map[]'s refcounting was changed to show that a used
swap entry is just for swap-cache, can be reused.  Then, while scanning
free entry in swap_map[], a swap entry may be able to be reclaimed and
reused.  It was caused by commit c9e444103b5e7a5 ("mm: reuse unused swap
entry if necessary").

But this caused deta corruption at resume. The scenario is

- Assume a clean-swap cache, but mapped.

- at hibernation_snapshot[], clean-swap-cache is saved as
  clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE.

- then, save_image() is called.  And reuse SWAP_HAS_CACHE entry to save
  image, and break the contents.

After resume:

- the memory reclaim runs and finds clean-not-referenced-swap-cache and
  discards it because it's marked as clean.  But here, the contents on
  disk and swap-cache is inconsistent.

Hance memory is corrupted.

This patch avoids the bug by not reclaiming swap-entry during hibernation.
This is a quick fix for backporting.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: implement HW performance events on the EV67 and later CPUs

This implements hardware performance events for the EV67 and later CPUs
within the Linux performance events subsystem.  Only using the performance
monitoring unit in HP/Compaq's so called "Aggregrate mode" is supported.

The code has been implemented in a manner that makes extension to other
older Alpha CPUs relatively straightforward should some mug wish to
indulge themselves.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: add wrperfmon.h header file to aid use of wrperfmon PALcall

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: add performance monitor interrupt counter

The following patches implement hardware performance events for the Alpha
EV67 and later CPUs.  I have had this running on a Compaq XP1000 (EV67,
single CPU) for a few days now.  Pretty cool -- discovered that the glibc
exp2() library routine uses on average 985 cycles to execute 777 CPU
instructions whereas Compaq's CPML library version of exp2() uses on
average 32 cycles to execute 47 CPU instructions to achieve the same
thing!

This patch:

Add performance monitor interrupt counternd and export the count to user
space via /proc/interrupts.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>