drm/amdgpu: Fix GRBM programming sequence

It needs to be done only for XCC instances in non-AID0. Use the physical
instance to determine non-AID0 XCC instances.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use instance table for sdma 4.4.2

For ASICs with sdma IP v4.4.2, add mapping for logical to physical
instances.

v2:
Register accesses on bare metal should be based on physical
instance. Use GET_INST() to get physical instance.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add mask for SDMA instances

Add a mask of SDMA instances available for use. On certain ASIC configs,
not all SDMA instances are available for software use.

v2:
Change sdma mask type to uint32_t (Le)

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use instance lookup table for GC 9.4.3

Register accesses need to be based on physical instance on bare metal.
Pass the right instance using logical to physical instance lookup
table before accessing registers. Add a macro GET_INST to get the right
physical instance of an IP corresponding to a logical instance.

v2: fix gfx_v9_4_3_check_rlcg_range() (Alex)

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add map of logical to physical inst

Add a map for logical to physical instances of an IP. For ex: on some device
configurations, the first logical XCC may not be the first physical XCC.
Software may continue to access in logical IP instance order. The map
provides a convenient way to get to the actual physical instance.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add device repartition support

GFX9.4.3 will support dynamic repartitioning of the GPU through sysfs.
Add device repartitioning support in KFD to repartition GPU from one
mode to other.

v2: squash in fix ("drm/amdkfd: Fix warning kgd2kfd_unlock_kfd defined but not used")

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Rework kfd_locked handling

Currently, even if kfd_locked is set, a process is first
created and then removed to work around a race condition
in updating kfd_locked flag. Rework kfd_locked handling to
ensure no processes is created if kfd_locked is set. This
is achieved by updating kfd_locked under kfd_processes_mutex.
With this there is no need for kfd_locked to be an atomic
counter. Instead, it can be a regular integer.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: configure the doorbell settings for sdma on non-AID0

Configure the sdma doorbell settings on NBIF0 and SYSHUB of each AID

v2: fetch aid_id from amdgpu_sdma_instance (Lijo)

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add indirect r/w interface for smn address greater than 32bits

On multiple AIDs platform, bit[34:32] in SMD address is leveraged to access
nonAID0 register smn address and new PCI_INDEX_HI register is introduced
to access the higher bits.

v2: rebase on latest register accessors (Alex)

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: EOP Removal - Handle size 0 correctly

On GC 9.4.3, we are removing the EOP buffer.
If we specify 0 for the size, CP_HQD_EOP_CONTROL ends up with
incorrect value as order_size_2 calculations does not handle 0.

Fix it by using zero for the MQD entry for EOP size 0.

v2: Reworked code with a conditional assignment and fixed style issues.

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reflect psp xgmi topology info for gfx9.4.3

Similar to GFX9.4.2 non-A+A devices, GFX9.4.3 psp xgmi topology info is
half duplex and requires the driver to fill in the bidirectional info.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: update amdgpu_fw_shared to amdgpu_vcn4_fw_shared

Use amdgpu_vcn4_fw_shared for vcn 4.0.3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: remove unused code

Remove unused code.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: update ucode setup

Use common amdgpu_vcn_setup_ucode for ucode setup.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: update new doorbell map

New doorbell map is used for VCN 4.0.3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: update jpeg header to support multiple AIDs

Add aid_id in jpeg header to support multiple AIDs.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: update vcn header to support multiple AIDs

Add aid_id in vcn header to support multiple AIDs

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: use vcn4 irqsrc header for VCN 4.0.3

Use vcn4 irqsrc header for VCN 4.0.3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change num_xcd to xcc_mask

Instead of number of XCCs, keep a mask of XCCs for the exact XCCs
available on the ASIC. XCC configuration could differ based on
different ASIC configs.

v2:
Rename num_xcd to num_xcc (Hawking)
Use smaller xcc_mask size, changed to u16 (Le)

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add the support of XGMI link for GC 9.4.3

Add the xgmi LFB_CNTL/LBF_SIZE reg addresses to fetch the xgmi info from.

v2: move get_xgmi_info() to GC_V9_4_3 sepecific source files to utilize
the register definitions specific for GC_V9_4_3
v3: remove the duplicated register definitions
v4: enable xgmi based on asic_type as XGMI_IP ver is not available
yet for IP discovery

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Ack-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new vram type for dgpu

hbm3 will be supported in some dgpu program

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Populate memory info before adding GPU node to topology

The local memory info needs to be fetched before the GPU node is added
to topology. Without this, the sysfs is incorrectly populated and the
size is reported as 0. This was causing rocr tests to fail. This issue
was caused because of a bad merge.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add SDMA info for SDMA 4.4.2

Update SDMA queue information for SDMA 4.4.2.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix SDMA in CPX mode

When creating a user-mode SDMA queue, CP FW expects
driver to use/set virtual SDMA engine id in MAP_QUEUES
packet instead of using the physical SDMA engine id.
Each partition node's virtual SDMA number should start
from 0. However, when allocating doorbell for the queue,
KFD needs to allocate the doorbell from doorbell space
corresponding to the physical SDMA engine id, otherwise
the hwardware will not see the doorbell press.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add gpu compute cores io links for gfx9.4.3

The PSP TA will only provide xGMI topology info for links between GPU
sockets so links between partitions from different sockets will be
hardcoded as 3 xGMI hops with 1 hops weighted as xGMI and 2 hops
weighted with a new intra-socket weight to indicate the longest
possible distance.

If the link between a partition and the CPU is non-PCIe, then assume
the CPU (CCDs) is located within the same socket as the partition
and represent the link as an intra-socket weighted single hop XGMI link
with memory bandwidth.

Links between partitions within a single socket will be abstracted as
single hop xGMI links weighted with the new intra-socket weight and
will have memory bandwidth.

Finally, use the unused function bits in the location ID to represent the
coordinates of the compute partition within its socket.

A follow on patch will resolve the requirement for GPU socket xGMI
link representation sometime later.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: introduce new doorbell assignment table for GC 9.4.3

Four basic reasons as below to do the change:
  1. number of ring expand a lot on GC 9.4.3, and adjustment on old
     assignment cannot make each ring in a continuous doorbell space.
  2. the SDMA doorbell index should not exceed 0x1FF on SDMA 4.2.2 due to
     regDOORBELLx_CTRL_ENTRY.BIF_DOORBELLx_RANGE_OFFSET_ENTRY field width.
  3. re-design the doorbell assignment and unify the calculation as
     "start + ring/inst id" will make the code much concise.
  4. only defining the START/END makes the table look simple

v2: (Lijo)
  1. replace name
  2. use num_inst_per_aid/sdma_doorbell_range instead of hardcoding

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: program GRBM_MCM_ADDR for non-AID0 GRBM

Otherwise the EOP interrupt on non-AID0 cannot route to IH0.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert the doorbell_index to 2 dwords offset for kiq

KIQ doorbell_index is non-zero from XCC1, thus need to left-shift it like
other rings.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set mmhub bitmask for multiple AIDs

Like GFXHUB, set MMHUB0 bitmask for each AID.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: complement the IH node_id table for multiple AIDs

With different node_id, the SDMA interrupt from multiple AIDs can be
distinguished by sw driver.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct the vmhub reference for each XCD in gfxhub init

Correct this though the value is same across different vmhub.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do mmhub init for multiple AIDs

Mmhub on each AID needs to be initialized respectively

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: assign the doorbell index for sdma on non-AID0

Allocate new sdma doorbell index for the instances only on AID1 for now.

Todo: there's limitation that SDMA doorbell index on SDMA 4.4.2 needs to be
less than 0x1FF, so the tail part in _AMDGPU_VEGA20_DOORBELL_ASSIGNMENT is not
enough to store sdma doorbell range on maximum 4 AIDs if doorbell_range is 20.
So it looks better to create a new doorbell index assignment table for 4.4.2.

v2: change "(x << 1) + 2" to "(x + 1) << 1" for readability.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for SDMA on multiple AIDs

Initialize SDMA instances on each AID.

v2: revise coding fault in hw_fini

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: adjust some basic elements for multiple AID case

add some elements below:
 - num_aid
 - aid_id for each sdma instance
 - num_inst_per_aid for sdma

and extend macro size below:
 - SDMA_MAX_INSTANCES to 16
 - AMDGPU_MAX_RINGS to 96
 - AMDGPU_MAX_HWIP_RINGS to 32

v2: move aid_id from amdgpu_ring to amdgpu_sdma_instance. (Lijo)

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: assign the doorbell index in 1st page to sdma page queue

Previously for vega10, the sdma_doorbell_range is only enough for sdma
gfx queue, thus the index on second doorbell page is allocated for sdma
page queue. From vega20, the sdma_doorbell_range on 1st page is enlarged.
Therefore, just leverage these index instead of allocation on 2nd page.

v2: change "(x << 1) + 2" to "(x + 1) << 1" for readability and add comments.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set XNACK per process on GC 9.4.3

Set RETRY_PERMISSION_OR_INVALID_PAGE_FAULT bit in VM_CONTEXT1_CNTL
as well so XNACK can be enabled in the SQ per process.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use new atomfirmware init for GC 9.4.3

Use the new atomfirmware initialization logic for GC 9.4.3 based ASICs
also. ASIC init logic doesn't consider boot clocks during init.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Update coherence settings for svm ranges

Recently introduced commit "drm/amdgpu: Set cache coherency
for GC 9.4.3" did not update the settings applicable for svm ranges.
Add the coherence settings for svm ranges for GFX IP 9.4.3.

Reviewed-by: Amber Lin <amber.lin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix CP_HYP_XCP_CTL register programming in CPX mode

Currently, in CPX mode, the CP_HYP_XCP_CTL register is programmed
incorrectly with the number of XCCs in the partition. As a result,
HIQ doesn't work in CPX mode. Fix this by programming the correct
number of XCCs in a partition, which is 1, in CPX mode.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Update SDMA queue management for GFX9.4.3

This patch updates SDMA queue management for multi XCC in GFX9.4.3.
- Allocate/deallocate SDMA queues from the correct SDMA engines
  based on the partition mode.
- Updates the kgd2kfd interface to fetch the correct SDMA register
  addresses.
- It also fixes dumping correct SDMA queue info in debugfs.

v2: squash in fix "drm/amdkfd: Fix XGMI SDMA user-mode queue allocation"

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Update sysfs node properties for multi XCC

Update simd_count and array_count node properties to report
values multiplied by number of XCCs in the partition.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Call DQM stop during DQM uninitialize

During DQM tear down, call DQM stop to unitialize HIQ and
associated memory allocated during packet manager init.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix VM fault reporting on XCC1

Fix VM fault reporting and clear VM fault register
for XCC1.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Update context save handling for multi XCC setup (v2)

Context save handling needs to be updated for a multi XCC
setup:
- On a multi XCC setup, KFD needs to report context save base
  address and size for each XCC in MQD.
- Thunk will allocate a large context save area covering all
  XCCs which will be equal to: num_of_xccs in a partition * size
  of context save area for 1 XCC. However, it will report only the
  size of context save area for 1 XCC only in the ioctl call.
- Driver then setups the MQD correctly using the size passed from
  Thunk and information about number of XCCs in a partition.
- Update get_wave_state function to return context save area
  for all XCCs in the partition.

v2: update the get_wave_state function for mqd manager v11 (Morris)

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add XCC inst to PASID TLB flushing

Add XCC instance to select the correct KIQ ring when
flushing TLBs on a multi-XCC setup.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add XCC instance to kgd2kfd interface (v3)

Gfx 9 starts to have multiple XCC instances in one device. Add instance
parameter to kgd2kfd functions where XCC instance was hard coded as 0.
Also, update code to pass the correct instance number when running
on a multi-XCC setup.

v2: introduce the XCC instance to gfx v11 (Morris)
v3: rebase (Alex)

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add PM4 target XCC

In a device that supports multiple XCCs, unlike AQL queues, the PM4 queue
will be only processed in one XCC in the partitioning. This patch
re-purposes the queue percentage variable in create queue and update
queue ioctl for the user space to specify the target XCC.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Update MQD management on multi XCC setup

Update MQD management for both HIQ and user-mode compute
queues on a multi XCC setup. MQDs needs to be allocated,
initialized, loaded and destroyed for each XCC in the KFD
node.

v2: squash in fix "drm/amdkfd: Fix SDMA+HIQ HQD allocation on GFX9.4.3"

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add spatial partitioning support in KFD

This patch introduces multi-partition support in KFD.
This patch includes:
- Support for maximum 8 spatial partitions in KFD.
- Initialize one HIQ per partition.
- Management of VMID range depending on partition mode.
- Management of doorbell aperture space between all
  partitions.
- Each partition does its own queue management, interrupt
  handling, SMI event reporting.
- IOMMU, if enabled with multiple partitions, will only work
  on first partition.
- SPM is only supported on the first partition.
- Currently, there is no support for resetting individual
  partitions. All partitions will reset together.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Introduce kfd_node struct (v5)

Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.

This is the first step in adding compute partition support in KFD.

v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add mode2 reset logic for v13.0.6

Mode2 reset for v13.0.6 has similar workflow as v13.0.2

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add some XCC programming

Add additional XCC programming sequences.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add node_id to physical id conversion in EOP handler

A new field nodeid in interrupt cookie indicates the node ID.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable the ring and IB test for slave kcq

With the mec FW update to utilize the mqd base set by
driver for kcq mapping, slave kcq ring test and IB test
can be re-enabled.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support gc v9_4_3 ring_test running on all xcc

Each xcc has its own sratch_reg offset

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix vcn doorbell range setting

Should use vcn_ring0_1 instead of doorbell index to
set nbio doorbell range.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: enable jpeg doorbell for jpeg4.0.3

Enable jpeg doorbell for jpeg4.0.3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: enable vcn doorbell for vcn4.0.3

Enable vcn doorbell for vcn4.0.3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nbio: update vcn doorbell range

VCN4.0.3 used up to 16 doorbells per partition.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Set F8_MODE for gc_v9_4_3

Set F8_MODE for GC 9.4.3 as optimal/non-IEEE. Also update gc_v9_0
to gc_v9_4_3 to include more definitions such as the F8_MODE bit, and
remove unused header files.

v2: fix IP version check (Alex)

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: add multiple jpeg rings support for vcn4_0_3

Add multiple jpeg rings support for vcn4_0_3

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: add multiple jpeg rings support

Add multiple jpeg rings support.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: enable vcn DPG mode for VCN4_0_3

Enable vcn DPG mode for VCN4_0_3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: enable vcn pg for VCN4_0_3

Enable vcn pg for VCN4_0_3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: enable vcn cg for VCN4_0_3

Enable vcn cg for VCN4_0_3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: enable jpeg pg for VCN4_0_3

Enable jpeg pg for VCN4_0_3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: enable jpeg cg for VCN4_0_3

Enable jpeg cg for VCN4_0_3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: add vcn support for VCN4_0_3

Add vcn support for VCN4_0_3.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: add jpeg support for VCN4_0_3

Add jpeg support for VCN4_0_3.

v2: squash in delayed work typo fix (Alex)

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN4_0_3 firmware

Add VCN4_0_3 firmware.

v2: fix fw name (Alex)

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add vcn v4_0_3 ip headers

Add vcn v4_0_3 register offset adn shift masks
header files

v2: update headers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/: add more macro to support offset variant

Add more macro to support offset variant and
simplify macro SOC15_WAIT_ON_RREG.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use the correct API to read register

Use SOC15 API so that the register offset is calculated correctly.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add kgd2kfd for GC 9.4.3

New GC (v9.4.3) and ATHUB (v1.8.0) versions
are used. Add kgd_gfx_v9_4_3_*
functions if registers in use of kgd_gfx_v9_*
functions are changed or have different offset.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: alloc vm inv engines for every vmhub

There are AMDGPU_MAX_VMHUBS of vmhub in maximum and need to init the
vm_inv_engs for all of them.

In this way, the below error can be ruled out.
[  217.317752] amdgpu 0000:02:00.0: amdgpu: no VM inv eng for ring sdma0

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: override partition mode through module parameter

Add a module parameter to override the partition mode.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make the WREG32_SOC15_xx macro to support multi GC

To write regs on different GCDs, use the inst index.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sysfs node for compute partition mode

Add current/available compute partitin mode sysfs node.

v2: make the sysfs node as IP independent one in amdgpu_gfx.c

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: assign different AMDGPU_GFXHUB for rings on each xcc

Pass the xcc_id to AMDGPU_GFXHUB(x)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: init vmhubs bitmask for GC 9.4.3

Each XCD owns one GFXHUB.

v2: switch to the new VMHUB layout

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add bitmask to iterate vmhubs

As the layout of VMHUB definition has been changed to cover multiple
XCD/AID case, the original num_vmhubs is not appropriate to do vmhub
iteration any more.

Drop num_vmhubs and introduce vmhubs_mask instead.

v2: switch to the new VMHUB layout
v3: use DECLARE_BITMAP to define vmhubs_mask

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: assign register address for vmhub object on each XCD

Each XCD has its own gfxhub.

v2: switch to the new VMHUB layout
v3: fix mistake

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: introduce vmhub definition for multi-partition cases (v3)

v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)

v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)

v3: apply the gfxhub/mmhub layout to new IPs (Hawking)

v4: fix up gmc11 (Alex)

v5: rebase (Alex)

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.236

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove v_startup workaround for dcn3+

[Why]
Calls to dcn20_adjust_freesync_v_startup are no longer
needed as of dcn3+ and can cause underflow in some cases

[How]
Move calls to dcn20_adjust_freesync_v_startup up into
validate_bandwidth for dcn2.x

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary variable

There is no need to use dc_version in the dc_construct_ctx since this
value is copied to dc_ctx->dce_version later. This commit removes the
extra steps.

Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make unbounded req update separate from dlg/ttu

[Description]
- Updates to unbounded requesting should not be conditional
  on updates to dlg / ttu, as this could prevent unbounded
  requesting from being updated if dlg / ttu does not change

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add visual confirm color support for MCLK switch

[Why && How]
We would like to have visual confirm color support for MCLK switch.
1. Set visual confirm color to yellow: Vblank MCLK switch.
2. Set visual confirm color to cyan: FPO + Vblank MCLK
switch.
3. Set visual confirm color to pink: Vactive MCLK switch.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix possible underflow for displays with large vblank

[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate

[How]
Simplify calculation of vblank_nom

Increase value for VBlankNomDefaultUS to 800us

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Convert connector signal id to string

To improve the readability of the of the log, this commit introduces a
function that converts the signal type id to a human-readable string.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update vactive margin and max vblank for fpo + vactive

[Description]
- Some 1920x1080@60hz displays have VBLANK time > 600us which we
  still want to accept for FPO + Vactive configs based on testing
- Increase max VBLANK time to 1000us to allow these configs
  for FPO + Vactive
- Increase minimum vactive switch margin for FPO + Vactive to 200us
- Based on testing, 1920x1080@120hz can have a switch margin
  of ~160us which requires significantly longer FPO stretch
  margin (5ms) which we don't want to accept for now
- Also move margins into debug option

Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only skip update for DCFCLK, UCLK, FCLK on overclock

[Description]
- Update clocks is skipped in the GPU overclock sequence
- However, we still need to update DISPCLK, DPPCLK, and DTBCLK
  because the GPU overclock sequence could temporarily disable
  ODM 2:1 combine because we disable all planes in the sequence

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable dpia validate

Use dpia_validate_usb4_bw() function

Fixes: a8b537605e22 ("drm/amd/display: Add function pointer for validate bw usb4")
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix possible power mode mismatch between driver and PMFW

PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged

When performing device unbind or halt, we have disabled all irqs at the
very begining like amdgpu_pci_remove or amdgpu_device_halt. So
amdgpu_irq_put for irqs stored in fence driver should not be called
any more, otherwise, below calltrace will arrive.

[  139.114088] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:616 amdgpu_irq_put+0xf6/0x110 [amdgpu]
[  139.114655] Call Trace:
[  139.114655]  <TASK>
[  139.114657]  amdgpu_fence_driver_hw_fini+0x93/0x130 [amdgpu]
[  139.114836]  amdgpu_device_fini_hw+0xb6/0x350 [amdgpu]
[  139.114955]  amdgpu_driver_unload_kms+0x51/0x70 [amdgpu]
[  139.115075]  amdgpu_pci_remove+0x63/0x160 [amdgpu]
[  139.115193]  ? __pm_runtime_resume+0x64/0x90
[  139.115195]  pci_device_remove+0x3a/0xb0
[  139.115197]  device_remove+0x43/0x70
[  139.115198]  device_release_driver_internal+0xbd/0x140

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: improve wait logic at fence polling

Accomplish this by reading the seq number right away instead of sleep
for 5us. There are certain cases where the fence is ready almost
immediately. Sleep number granularity was also reduced as the majority
of the kiq tlb flush takes between 2us to 6us.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc11: implement get_vbios_fb_size()

Implement get_vbios_fb_size() so we can properly reserve
the vbios splash screen to avoid potential artifacts on the
screen during the transition from the pre-OS console to the
OS console.

Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify the calculation of variables

./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c:586:37-39: WARNING !A || A && B is equivalent to !A || B.
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c:595:37-39: WARNING !A || A && B is equivalent to !A || B.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4941
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id

Due to the raven2 and raven/picasso maybe have the same GC_HWIP version.
So differentiate them by revision id.

Signed-off-by: shanshengwang <shansheng.wang@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>