Will Deacon [Mon, 5 Feb 2018 15:34:20 +0000 (15:34 +0000)]
arm64: entry: Ensure branch through syscall table is bounded under speculation
Commit
6314d90e6493 upstream.
In a similar manner to array_index_mask_nospec, this patch introduces an
assembly macro (mask_nospec64) which can be used to bound a value under
speculation. This macro is then used to ensure that the indirect branch
through the syscall table is bounded under speculation, with out-of-range
addresses speculating as calls to sys_io_setup (0).
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Mon, 5 Feb 2018 15:34:19 +0000 (15:34 +0000)]
arm64: Use pointer masking to limit uaccess speculation
Commit
4d8efc2d5ee4 upstream.
Similarly to x86, mitigate speculation past an access_ok() check by
masking the pointer against the address limit before use.
Even if we don't expect speculative writes per se, it is plausible that
a CPU may still speculate at least as far as fetching a cache line for
writing, hence we also harden put_user() and clear_user() for peace of
mind.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Mon, 5 Feb 2018 15:34:18 +0000 (15:34 +0000)]
arm64: Make USER_DS an inclusive limit
Commit
51369e398d0d upstream.
Currently, USER_DS represents an exclusive limit while KERNEL_DS is
inclusive. In order to do some clever trickery for speculation-safe
masking, we need them both to behave equivalently - there aren't enough
bits to make KERNEL_DS exclusive, so we have precisely one option. This
also happens to correct a longstanding false negative for a range
ending on the very top byte of kernel memory.
Mark Rutland points out that we've actually got the semantics of
addresses vs. segments muddled up in most of the places we need to
amend, so shuffle the {USER,KERNEL}_DS definitions around such that we
can correct those properly instead of just pasting "-1"s everywhere.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Mon, 5 Feb 2018 15:34:17 +0000 (15:34 +0000)]
arm64: Implement array_index_mask_nospec()
Commit
022620eed3d0 upstream.
Provide an optimised, assembly implementation of array_index_mask_nospec()
for arm64 so that the compiler is not in a position to transform the code
in ways which affect its ability to inhibit speculation (e.g. by introducing
conditional branches).
This is similar to the sequence used by x86, modulo architectural differences
in the carry/borrow flags.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 5 Feb 2018 15:34:16 +0000 (15:34 +0000)]
arm64: barrier: Add CSDB macros to control data-value prediction
Commit
669474e772b9 upstream.
For CPUs capable of data value prediction, CSDB waits for any outstanding
predictions to architecturally resolve before allowing speculative execution
to continue. Provide macros to expose it to the arch code.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jan 2018 12:00:00 +0000 (12:00 +0000)]
arm64: idmap: Use "awx" flags for .idmap.text .pushsection directives
Commit
439e70e27a51 upstream.
The identity map is mapped as both writeable and executable by the
SWAPPER_MM_MMUFLAGS and this is relied upon by the kpti code to manage
a synchronisation flag. Update the .pushsection flags to reflect the
actual mapping attributes.
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jan 2018 11:59:58 +0000 (11:59 +0000)]
arm64: entry: Reword comment about post_ttbr_update_workaround
Commit
f167211a93ac upstream.
We don't fully understand the Cavium ThunderX erratum, but it appears
that mapping the kernel as nG can lead to horrible consequences such as
attempting to execute userspace from kernel context. Since kpti isn't
enabled for these CPUs anyway, simplify the comment justifying the lack
of post_ttbr_update_workaround in the exception trampoline.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Mon, 29 Jan 2018 11:59:56 +0000 (11:59 +0000)]
arm64: Force KPTI to be disabled on Cavium ThunderX
Commit
6dc52b15c4a4 upstream.
Cavium ThunderX's erratum 27456 results in a corruption of icache
entries that are loaded from memory that is mapped as non-global
(i.e. ASID-tagged).
As KPTI is based on memory being mapped non-global, let's prevent
it from kicking in if this erratum is detected.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[will: Update comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 6 Feb 2018 22:22:50 +0000 (22:22 +0000)]
arm64: kpti: Add ->enable callback to remap swapper using nG mappings
Commit
f992b4dfd58b upstream.
Defaulting to global mappings for kernel space is generally good for
performance and appears to be necessary for Cavium ThunderX. If we
subsequently decide that we need to enable kpti, then we need to rewrite
our existing page table entries to be non-global. This is fiddly, and
made worse by the possible use of contiguous mappings, which require
a strict break-before-make sequence.
Since the enable callback runs on each online CPU from stop_machine
context, we can have all CPUs enter the idmap, where secondaries can
wait for the primary CPU to rewrite swapper with its MMU off. It's all
fairly horrible, but at least it only runs once.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jan 2018 11:59:54 +0000 (11:59 +0000)]
arm64: mm: Permit transitioning from Global to Non-Global without BBM
Commit
4e6020565596 upstream.
Break-before-make is not needed when transitioning from Global to
Non-Global mappings, provided that the contiguous hint is not being used.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jan 2018 11:59:53 +0000 (11:59 +0000)]
arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()
Commit
41acec624087 upstream.
To allow systems which do not require kpti to continue running with
global kernel mappings (which appears to be a requirement for Cavium
ThunderX due to a CPU erratum), make the use of nG in the kernel page
tables dependent on arm64_kernel_unmapped_at_el0(), which is resolved
at runtime.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jayachandran C [Fri, 19 Jan 2018 12:22:48 +0000 (04:22 -0800)]
arm64: Turn on KPTI only on CPUs that need it
Commit
0ba2e29c7fc1 upstream.
Whitelist Broadcom Vulcan/Cavium ThunderX2 processors in
unmap_kernel_at_el0(). These CPUs are not vulnerable to
CVE-2017-5754 and do not need KPTI when KASLR is off.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jayachandran C [Mon, 8 Jan 2018 06:53:35 +0000 (22:53 -0800)]
arm64: cputype: Add MIDR values for Cavium ThunderX2 CPUs
Commit
0d90718871fe upstream.
Add the older Broadcom ID as well as the new Cavium ID for ThunderX2
CPUs.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Wed, 10 Jan 2018 13:18:30 +0000 (13:18 +0000)]
arm64: kpti: Fix the interaction between ASID switching and software PAN
Commit
6b88a32c7af6 upstream.
With ARM64_SW_TTBR0_PAN enabled, the exception entry code checks the
active ASID to decide whether user access was enabled (non-zero ASID)
when the exception was taken. On return from exception, if user access
was previously disabled, it re-instates TTBR0_EL1 from the per-thread
saved value (updated in switch_mm() or efi_set_pgd()).
Commit
7655abb95386 ("arm64: mm: Move ASID from TTBR0 to TTBR1") makes a
TTBR0_EL1 + ASID switching non-atomic. Subsequently, commit
27a921e75711
("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN") changes the
__uaccess_ttbr0_disable() function and asm macro to first write the
reserved TTBR0_EL1 followed by the ASID=0 update in TTBR1_EL1. If an
exception occurs between these two, the exception return code will
re-instate a valid TTBR0_EL1. Similar scenario can happen in
cpu_switch_mm() between setting the reserved TTBR0_EL1 and the ASID
update in cpu_do_switch_mm().
This patch reverts the entry.S check for ASID == 0 to TTBR0_EL1 and
disables the interrupts around the TTBR0_EL1 and ASID switching code in
__uaccess_ttbr0_disable(). It also ensures that, when returning from the
EFI runtime services, efi_set_pgd() doesn't leave a non-zero ASID in
TTBR1_EL1 by using uaccess_ttbr0_{enable,disable}.
The accesses to current_thread_info()->ttbr0 are updated to use
READ_ONCE/WRITE_ONCE.
As a safety measure, __uaccess_ttbr0_enable() always masks out any
existing non-zero ASID TTBR1_EL1 before writing in the new ASID.
Fixes:
27a921e75711 ("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN")
Acked-by: Will Deacon <will.deacon@arm.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Fri, 1 Dec 2017 17:33:48 +0000 (17:33 +0000)]
arm64: mm: Introduce TTBR_ASID_MASK for getting at the ASID in the TTBR
Commit
b519538dfefc upstream.
There are now a handful of open-coded masks to extract the ASID from a
TTBR value, so introduce a TTBR_ASID_MASK and use that instead.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Tue, 9 Jan 2018 16:12:18 +0000 (16:12 +0000)]
arm64: capabilities: Handle duplicate entries for a capability
Commit
67948af41f2e upstream.
Sometimes a single capability could be listed multiple times with
differing matches(), e.g, CPU errata for different MIDR versions.
This breaks verify_local_cpu_feature() and this_cpu_has_cap() as
we stop checking for a capability on a CPU with the first
entry in the given table, which is not sufficient. Make sure we
run the checks for all entries of the same capability. We do
this by fixing __this_cpu_has_cap() to run through all the
entries in the given table for a match and reuse it for
verify_local_cpu_feature().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 27 Nov 2017 18:29:30 +0000 (18:29 +0000)]
arm64: Take into account ID_AA64PFR0_EL1.CSV3
Commit
179a56f6f9fb upstream.
For non-KASLR kernels where the KPTI behaviour has not been overridden
on the command line we can use ID_AA64PFR0_EL1.CSV3 to determine whether
or not we should unmap the kernel whilst running at EL0.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 16:19:39 +0000 (16:19 +0000)]
arm64: Kconfig: Reword UNMAP_KERNEL_AT_EL0 kconfig entry
Commit
0617052ddde3 upstream.
Although CONFIG_UNMAP_KERNEL_AT_EL0 does make KASLR more robust, it's
actually more useful as a mitigation against speculation attacks that
can leak arbitrary kernel data to userspace through speculation.
Reword the Kconfig help message to reflect this, and make the option
depend on EXPERT so that it is on by default for the majority of users.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:41:01 +0000 (14:41 +0000)]
arm64: Kconfig: Add CONFIG_UNMAP_KERNEL_AT_EL0
Commit
084eb77cd3a8 upstream.
Add a Kconfig entry to control use of the entry trampoline, which allows
us to unmap the kernel whilst running in userspace and improve the
robustness of KASLR.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 16:15:59 +0000 (16:15 +0000)]
arm64: use RET instruction for exiting the trampoline
Commit
be04a6d1126b upstream.
Speculation attacks against the entry trampoline can potentially resteer
the speculative instruction stream through the indirect branch and into
arbitrary gadgets within the kernel.
This patch defends against these attacks by forcing a misprediction
through the return stack: a dummy BL instruction loads an entry into
the stack, so that the predicted program flow of the subsequent RET
instruction is to a branch-to-self instruction which is finally resolved
as a branch to the kernel vectors with speculation suppressed.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Dec 2017 11:24:02 +0000 (11:24 +0000)]
arm64: kaslr: Put kernel vectors address in separate data page
Commit
6c27c4082f4f upstream.
The literal pool entry for identifying the vectors base is the only piece
of information in the trampoline page that identifies the true location
of the kernel.
This patch moves it into a page-aligned region of the .rodata section
and maps this adjacent to the trampoline text via an additional fixmap
entry, which protects against any accidental leakage of the trampoline
contents.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:38:19 +0000 (14:38 +0000)]
arm64: entry: Add fake CPU feature for unmapping the kernel at EL0
Commit
ea1e3de85e94 upstream.
Allow explicit disabling of the entry trampoline on the kernel command
line (kpti=off) by adding a fake CPU feature (ARM64_UNMAP_KERNEL_AT_EL0)
that can be used to toggle the alternative sequences in our entry code and
avoid use of the trampoline altogether if desired. This also allows us to
make use of a static key in arm64_kernel_unmapped_at_el0().
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:33:28 +0000 (14:33 +0000)]
arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks
Commit
18011eac28c7 upstream.
When unmapping the kernel at EL0, we use tpidrro_el0 as a scratch register
during exception entry from native tasks and subsequently zero it in
the kernel_ventry macro. We can therefore avoid zeroing tpidrro_el0
in the context-switch path for native tasks using the entry trampoline.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 13 Dec 2017 22:19:37 +0000 (14:19 -0800)]
arm64: cpu_errata: Add Kryo to Falkor 1003 errata
Commit
bb48711800e6 upstream.
The Kryo CPUs are also affected by the Falkor 1003 errata, so
we need to do the same workaround on Kryo CPUs. The MIDR is
slightly more complicated here, where the PART number is not
always the same when looking at all the bits from 15 to 4. Drop
the lower 8 bits and just look at the top 4 to see if it's '2'
and then consider those as Kryo CPUs. This covers all the
combinations without having to list them all out.
Fixes:
38fd94b0275c ("arm64: Work around Falkor erratum 1003")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:29:19 +0000 (14:29 +0000)]
arm64: erratum: Work around Falkor erratum #E1003 in trampoline code
Commit
d1777e686ad1 upstream.
We rely on an atomic swizzling of TTBR1 when transitioning from the entry
trampoline to the kernel proper on an exception. We can't rely on this
atomicity in the face of Falkor erratum #E1003, so on affected cores we
can issue a TLB invalidation to invalidate the walk cache prior to
jumping into the kernel. There is still the possibility of a TLB conflict
here due to conflicting walk cache entries prior to the invalidation, but
this doesn't appear to be the case on these CPUs in practice.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:24:29 +0000 (14:24 +0000)]
arm64: entry: Hook up entry trampoline to exception vectors
Commit
4bf3286d29f3 upstream.
Hook up the entry trampoline to our exception vectors so that all
exceptions from and returns to EL0 go via the trampoline, which swizzles
the vector base register accordingly. Transitioning to and from the
kernel clobbers x30, so we use tpidrro_el0 and far_el1 as scratch
registers for native tasks.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:20:21 +0000 (14:20 +0000)]
arm64: entry: Explicitly pass exception level to kernel_ventry macro
Commit
5b1f7fe41909 upstream.
We will need to treat exceptions from EL0 differently in kernel_ventry,
so rework the macro to take the exception level as an argument and
construct the branch target using that.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:14:17 +0000 (14:14 +0000)]
arm64: mm: Map entry trampoline into trampoline and kernel page tables
Commit
51a0048beb44 upstream.
The exception entry trampoline needs to be mapped at the same virtual
address in both the trampoline page table (which maps nothing else)
and also the kernel page table, so that we can swizzle TTBR1_EL1 on
exceptions from and return to EL0.
This patch maps the trampoline at a fixed virtual address in the fixmap
area of the kernel virtual address space, which allows the kernel proper
to be randomized with respect to the trampoline when KASLR is enabled.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 14:07:40 +0000 (14:07 +0000)]
arm64: entry: Add exception trampoline page for exceptions from EL0
Commit
c7b9adaf85f8 upstream.
To allow unmapping of the kernel whilst running at EL0, we need to
point the exception vectors at an entry trampoline that can map/unmap
the kernel on entry/exit respectively.
This patch adds the trampoline page, although it is not yet plugged
into the vector table and is therefore unused.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 13:13:33 +0000 (14:13 +0100)]
arm64: mm: Invalidate both kernel and user ASIDs when performing TLBI
Commit
9b0de864b5bc upstream.
Since an mm has both a kernel and a user ASID, we need to ensure that
broadcast TLB maintenance targets both address spaces so that things
like CoW continue to work with the uaccess primitives in the kernel.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 14 Nov 2017 13:58:08 +0000 (13:58 +0000)]
arm64: mm: Add arm64_kernel_unmapped_at_el0 helper
Commit
fc0e1299da54 upstream.
In order for code such as TLB invalidation to operate efficiently when
the decision to map the kernel at EL0 is determined at runtime, this
patch introduces a helper function, arm64_kernel_unmapped_at_el0, to
determine whether or not the kernel is mapped whilst running in userspace.
Currently, this just reports the value of CONFIG_UNMAP_KERNEL_AT_EL0,
but will later be hooked up to a fake CPU capability using a static key.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 13:10:28 +0000 (14:10 +0100)]
arm64: mm: Allocate ASIDs in pairs
Commit
0c8ea531b774 upstream.
In preparation for separate kernel/user ASIDs, allocate them in pairs
for each mm_struct. The bottom bit distinguishes the two: if it is set,
then the ASID will map only userspace.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 12:58:16 +0000 (13:58 +0100)]
arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN
Commit
27a921e75711 upstream.
With the ASID now installed in TTBR1, we can re-enable ARM64_SW_TTBR0_PAN
by ensuring that we switch to a reserved ASID of zero when disabling
user access and restore the active user ASID on the uaccess enable path.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 12:34:30 +0000 (13:34 +0100)]
arm64: mm: Rename post_ttbr0_update_workaround
Commit
158d495899ce upstream.
The post_ttbr0_update_workaround hook applies to any change to TTBRx_EL1.
Since we're using TTBR1 for the ASID, rename the hook to make it clearer
as to what it's doing.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 12:29:06 +0000 (13:29 +0100)]
arm64: mm: Remove pre_ttbr0_update_workaround for Falkor erratum #E1003
Commit
85d13c001497 upstream.
The pre_ttbr0_update_workaround hook is called prior to context-switching
TTBR0 because Falkor erratum E1003 can cause TLB allocation with the wrong
ASID if both the ASID and the base address of the TTBR are updated at
the same time.
With the ASID sitting safely in TTBR1, we no longer update things
atomically, so we can remove the pre_ttbr0_update_workaround macro as
it's no longer required. The erratum infrastructure and documentation
is left around for #E1003, as it will be required by the entry
trampoline code in a future patch.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 12:19:09 +0000 (13:19 +0100)]
arm64: mm: Move ASID from TTBR0 to TTBR1
Commit
7655abb95386 upstream.
In preparation for mapping kernelspace and userspace with different
ASIDs, move the ASID to TTBR1 and update switch_mm to context-switch
TTBR0 via an invalid mapping (the zero page).
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 12:04:48 +0000 (13:04 +0100)]
arm64: mm: Temporarily disable ARM64_SW_TTBR0_PAN
Commit
376133b7edc2 upstream.
We're about to rework the way ASIDs are allocated, switch_mm is
implemented and low-level kernel entry/exit is handled, so keep the
ARM64_SW_TTBR0_PAN code out of the way whilst we do the heavy lifting.
It will be re-enabled in a subsequent patch.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 10 Aug 2017 11:56:18 +0000 (12:56 +0100)]
arm64: mm: Use non-global mappings for kernel space
Commit
e046eb0c9bf2 upstream.
In preparation for unmapping the kernel whilst running in userspace,
make the kernel mappings non-global so we can avoid expensive TLB
invalidation on kernel exit to userspace.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yury Norov [Thu, 31 Aug 2017 08:30:50 +0000 (11:30 +0300)]
arm64: move TASK_* definitions to <asm/processor.h>
Commit
eef94a3d09aa upstream.
ILP32 series [1] introduces the dependency on <asm/is_compat.h> for
TASK_SIZE macro. Which in turn requires <asm/thread_info.h>, and
<asm/thread_info.h> include <asm/memory.h>, giving a circular dependency,
because TASK_SIZE is currently located in <asm/memory.h>.
In other architectures, TASK_SIZE is defined in <asm/processor.h>, and
moving TASK_SIZE there fixes the problem.
Discussion: https://patchwork.kernel.org/patch/9929107/
[1] https://github.com/norov/linux/tree/ilp32-next
CC: Will Deacon <will.deacon@arm.com>
CC: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arvind Yadav [Fri, 22 Sep 2017 13:07:06 +0000 (09:07 -0400)]
media: hdpvr: Fix an error handling path in hdpvr_probe()
commit
c0f71bbb810237a38734607ca4599632f7f5d47f upstream.
Here, hdpvr_register_videodev() is responsible for setup and
register a video device. Also defining and initializing a worker.
hdpvr_register_videodev() is calling by hdpvr_probe at last.
So no need to flush any work here.
Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 26 Sep 2017 21:10:21 +0000 (17:10 -0400)]
media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner
commit
7bf7a7116ed313c601307f7e585419369926ab05 upstream.
When the tuner was split from m88rs2000 the attach function is in wrong
place.
Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.
Prevents driver starting up without any tuner connected.
Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 26 Sep 2017 21:10:20 +0000 (17:10 -0400)]
media: dvb-usb-v2: lmedm04: Improve logic checking of warm start
commit
3d932ee27e852e4904647f15b64dedca51187ad7 upstream.
Warm start has no check as whether a genuine device has
connected and proceeds to next execution path.
Check device should read 0x47 at offset of 2 on USB descriptor read
and it is the amount requested of 6 bytes.
Fix for
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access as
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mohamed Ghannam [Tue, 5 Dec 2017 20:58:35 +0000 (20:58 +0000)]
dccp: CVE-2017-8824: use-after-free in DCCP code
commit
69c64866ce072dea1d1e59a0d61e0f66c0dffb76 upstream.
Whenever the sock object is in DCCP_CLOSED state,
dccp_disconnect() must free dccps_hc_tx_ccid and
dccps_hc_rx_ccid and set to NULL.
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 29 Nov 2017 12:54:11 +0000 (14:54 +0200)]
drm/i915: Fix deadlock in i830_disable_pipe()
commit
4488496d58200c7511842e049a4cc891d928da56 upstream.
i830_disable_pipe() gets called from the power well code, and thus
we're already holding the power domain mutex. That means we can't
call plane->get_hw_state() as it will also try to grab the
same mutex and will thus deadlock.
Replace the assert_plane() calls (which calls ->get_hw_state()) with
just raw register reads in i830_disable_pipe(). As a bonus we can
now get a warning if plane C is enabled even though we don't even
expose it as a drm plane.
v2: Do a separate WARN_ON() for each plane (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes:
d87ce7640295 ("drm/i915: Add .get_hw_state() method for planes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129125411.29055-1-ville.syrjala@linux.intel.com
(cherry picked from commit
5816d9cbc0a0fbf232fe297cefcb85361a3cde90)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Fri, 17 Nov 2017 19:19:09 +0000 (21:19 +0200)]
drm/i915: Redo plane sanitation during readout
commit
23ac12732825901b3fc6ac720958d8bff9a0d6ec upstream.
Unify the plane disabling during state readout by pulling the code into
a new helper intel_plane_disable_noatomic(). We'll also read out the
state of all planes, so that we know which planes really need to be
diabled.
Additonally we change the plane<->pipe mapping sanitation to work by
simply disabling the offending planes instead of entire pipes. And
we do it before we otherwise sanitize the crtcs, which means we don't
have to worry about misassigned planes during crtc sanitation anymore.
v2: Reoder patches to not depend on enum old_plane_id
v3: s/for_each_pipe/for_each_intel_crtc/
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103223
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-3-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit
b1e01595a66dc206a2c75401ec4c285740537f3f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Fri, 17 Nov 2017 19:19:08 +0000 (21:19 +0200)]
drm/i915: Add .get_hw_state() method for planes
commit
d87ce76402950b8e4d5117276d44465658e886a4 upstream.
Add a .get_hw_state() method for planes, returning true or false
depending on whether the plane is enabled. Use it to rewrite the
plane enabled/disabled asserts in platform agnostic fashion.
We do lose the pre-gen4 plane<->pipe mapping checks, but since we're
supposed sanitize that anyway it doesn't really matter.
v2: Reoder patches to not depend on enum old_plane_id
Just call assert_plane_disabled() from assert_planes_disabled()
v3: Deal with disabled power wells in .get_hw_state()
v4: Rebase due skl primary plane code removal
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Tested-by: Thierry Reding <thierry.reding@gmail.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-2-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit
51f5a096398433a881e845d3685a2c1dac756019)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Wed, 24 Jan 2018 01:45:38 +0000 (20:45 -0500)]
sched/rt: Up the root domain ref count when passing it around via IPIs
commit
364f56653708ba8bcdefd4f0da2a42904baa8eeb upstream.
When issuing an IPI RT push, where an IPI is sent to each CPU that has more
than one RT task scheduled on it, it references the root domain's rto_mask,
that contains all the CPUs within the root domain that has more than one RT
task in the runable state. The problem is, after the IPIs are initiated, the
rq->lock is released. This means that the root domain that is associated to
the run queue could be freed while the IPIs are going around.
Add a sched_get_rd() and a sched_put_rd() that will increment and decrement
the root domain's ref count respectively. This way when initiating the IPIs,
the scheduler will up the root domain's ref count before releasing the
rq->lock, ensuring that the root domain does not go away until the IPI round
is complete.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Wed, 24 Jan 2018 01:45:37 +0000 (20:45 -0500)]
sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()
commit
ad0f1d9d65938aec72a698116cd73a980916895e upstream.
When the rto_push_irq_work_func() is called, it looks at the RT overloaded
bitmask in the root domain via the runqueue (rq->rd). The problem is that
during CPU up and down, nothing here stops rq->rd from changing between
taking the rq->rd->rto_lock and releasing it. That means the lock that is
released is not the same lock that was taken.
Instead of using this_rq()->rd to get the root domain, as the irq work is
part of the root domain, we can simply get the root domain from the irq work
that is passed to the routine:
container_of(work, struct root_domain, rto_push_work)
This keeps the root domain consistent.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haozhong Zhang [Wed, 10 Jan 2018 13:44:42 +0000 (21:44 +0800)]
KVM MMU: check pending exception before injecting APF
commit
2a266f23550be997d783f27e704b9b40c4010292 upstream.
For example, when two APF's for page ready happen after one exit and
the first one becomes pending, the second one will result in #DF.
Instead, just handle the second page fault synchronously.
Reported-by: Ross Zwisler <zwisler@gmail.com>
Message-ID: <CAOxpaSUBf8QoOZQ1p4KfUp0jq76OKfGY4Uxs-Gg8ngReD99xww@mail.gmail.com>
Reported-by: Alec Blayne <ab@tevsa.net>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shanker Donthineni [Mon, 11 Dec 2017 22:42:32 +0000 (16:42 -0600)]
arm64: Add software workaround for Falkor erratum 1041
commit
932b50c7c1c65e6f23002e075b97ee083c4a9e71 upstream.
The ARM architecture defines the memory locations that are permitted
to be accessed as the result of a speculative instruction fetch from
an exception level for which all stages of translation are disabled.
Specifically, the core is permitted to speculatively fetch from the
4KB region containing the current program counter 4K and next 4K.
When translation is changed from enabled to disabled for the running
exception level (SCTLR_ELn[M] changed from a value of 1 to 0), the
Falkor core may errantly speculatively access memory locations outside
of the 4KB region permitted by the architecture. The errant memory
access may lead to one of the following unexpected behaviors.
1) A System Error Interrupt (SEI) being raised by the Falkor core due
to the errant memory access attempting to access a region of memory
that is protected by a slave-side memory protection unit.
2) Unpredictable device behavior due to a speculative read from device
memory. This behavior may only occur if the instruction cache is
disabled prior to or coincident with translation being changed from
enabled to disabled.
The conditions leading to this erratum will not occur when either of the
following occur:
1) A higher exception level disables translation of a lower exception level
(e.g. EL2 changing SCTLR_EL1[M] from a value of 1 to 0).
2) An exception level disabling its stage-1 translation if its stage-2
translation is enabled (e.g. EL1 changing SCTLR_EL1[M] from a value of 1
to 0 when HCR_EL2[VM] has a value of 1).
To avoid the errant behavior, software must execute an ISB immediately
prior to executing the MSR that will change SCTLR_ELn[M] from 1 to 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shanker Donthineni [Mon, 11 Dec 2017 22:42:31 +0000 (16:42 -0600)]
arm64: Define cputype macros for Falkor CPU
commit
c622cc013cece073722592cff1ac6643a33b1622 upstream.
Add cputype definition macros for Qualcomm Datacenter Technologies
Falkor CPU in cputype.h. It's unfortunate that the first revision
of the Falkor CPU used the wrong part number 0x800, got fixed in v2
chip with part number 0xC00, and would be used the same value for
future revisions.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Villemoes [Thu, 9 Nov 2017 13:39:55 +0000 (14:39 +0100)]
watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
commit
bc137dfdbec27c0ec5731a89002daded4a4aa1ea upstream.
The first patch above (https://patchwork.kernel.org/patch/9970181/)
makes the oops go away, but it just papers over the problem. The real
problem is that the watchdog core clears WDOG_HW_RUNNING in
watchdog_stop, and the gpio driver fails to set it in its stop
function when it doesn't actually stop it. This means that the core
doesn't know that it now has responsibility for petting the device, in
turn causing the device to reset the system (I hadn't noticed this
because the board I'm working on has that reset logic disabled).
How about this (other drivers may of course have the same problem, I
haven't checked). One might say that ->stop should return an error
when the device can't be stopped, but OTOH this brings parity between
a device without a ->stop method and a GPIO wd that has always-running
set. IOW, I think ->stop should only return an error when an actual
attempt to stop the hardware failed.
From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
The watchdog framework clears WDOG_HW_RUNNING before calling
->stop. If the driver is unable to stop the device, it is supposed to
set that bit again so that the watchdog core takes care of sending
heart-beats while the device is not open from user-space. Update the
gpio_wdt driver to honour that contract (and get rid of the redundant
clearing of WDOG_HW_RUNNING).
Fixes:
3c10bbde10 ("watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Wed, 6 Dec 2017 07:15:31 +0000 (23:15 -0800)]
sched/wait: Fix add_wait_queue() behavioral change
commit
c6b9d9a33029014446bd9ed84c1688f6d3d4eab9 upstream.
The following cleanup commit:
50816c48997a ("sched/wait: Standardize internal naming of wait-queue entries")
... unintentionally changed the behavior of add_wait_queue() from
inserting the wait entry at the head of the wait queue to the tail
of the wait queue.
Beyond a negative performance impact this change in behavior
theoretically also breaks wait queues which mix exclusive and
non-exclusive waiters, as non-exclusive waiters will not be
woken up if they are queued behind enough exclusive waiters.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Fixes: ("sched/wait: Standardize internal naming of wait-queue entries")
Link: http://lkml.kernel.org/r/a16c8ccffd39bd08fdaa45a5192294c784b803a7.1512544324.git.osandov@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Shunyong [Mon, 29 Jan 2018 06:40:11 +0000 (14:40 +0800)]
dmaengine: dmatest: fix container_of member in dmatest_callback
commit
66b3bd2356e0a1531c71a3dcf96944621e25c17c upstream.
The type of arg passed to dmatest_callback is struct dmatest_done.
It refers to test_done in struct dmatest_thread, not done_wait.
Fixes:
6f6a23a213be ("dmaengine: dmatest: move callback wait ...")
Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Acked-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew-sh Cheng [Fri, 8 Dec 2017 06:07:56 +0000 (14:07 +0800)]
cpufreq: mediatek: add mediatek related projects into blacklist
commit
6066998cbd2b1012a8d5bc9a2957cfd0ad53150e upstream.
mediatek projects will use mediate-cpufreq.c as cpufreq driver,
instead of using cpufreq_dt.c
Add mediatek related projects into cpufreq-dt blacklist
Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aurelien Aptel [Thu, 25 Jan 2018 14:59:39 +0000 (15:59 +0100)]
CIFS: zero sensitive data when freeing
commit
97f4b7276b829a8927ac903a119bef2f963ccc58 upstream.
also replaces memset()+kfree() by kzfree().
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel N Pettersson [Thu, 11 Jan 2018 15:00:12 +0000 (16:00 +0100)]
cifs: Fix autonegotiate security settings mismatch
commit
9aca7e454415f7878b28524e76bebe1170911a88 upstream.
Autonegotiation gives a security settings mismatch error if the SMB
server selects an SMBv3 dialect that isn't SMB3.02. The exact error is
"protocol revalidation - security settings mismatch".
This can be tested using Samba v4.2 or by setting the global Samba
setting max protocol = SMB3_00.
The check that fails in smb3_validate_negotiate is the dialect
verification of the negotiate info response. This is because it tries
to verify against the protocol_id in the global smbdefault_values. The
protocol_id in smbdefault_values is SMB3.02.
In SMB2_negotiate the protocol_id in smbdefault_values isn't updated,
it is global so it probably shouldn't be, but server->dialect is.
This patch changes the check in smb3_validate_negotiate to use
server->dialect instead of server->vals->protocol_id. The patch works
with autonegotiate and when using a specific version in the vers mount
option.
Signed-off-by: Daniel N Pettersson <danielnp@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Wilcox [Fri, 15 Dec 2017 20:48:32 +0000 (12:48 -0800)]
cifs: Fix missing put_xid in cifs_file_strict_mmap
commit
f04a703c3d613845ae3141bfaf223489de8ab3eb upstream.
If cifs_zap_mapping() returned an error, we would return without putting
the xid that we got earlier. Restructure cifs_file_strict_mmap() and
cifs_file_mmap() to be more similar to each other and have a single
point of return that always puts the xid.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Suchanek [Mon, 15 Jan 2018 13:30:03 +0000 (14:30 +0100)]
powerpc/pseries: include linux/types.h in asm/hvcall.h
commit
1b689a95ce7427075f9ac9fb4aea1af530742b7f upstream.
Commit
6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h
This breaks hvcall.h users that do not include the header themselves.
Fixes:
6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Redfearn [Tue, 14 Nov 2017 10:52:54 +0000 (10:52 +0000)]
watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
commit
24f8d233074badd4c18e4dafd2fb97d65838afed upstream.
Commit
da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
enabled building the Indy watchdog driver when COMPILE_TEST is enabled.
However, the driver makes reference to symbols that are only defined for
certain platforms are selected in the config. These platforms select
SGI_HAS_INDYDOG. Without this, link time errors result, for example
when building a MIPS allyesconfig.
drivers/watchdog/indydog.o: In function `indydog_write':
indydog.c:(.text+0x18): undefined reference to `sgimc'
indydog.c:(.text+0x1c): undefined reference to `sgimc'
drivers/watchdog/indydog.o: In function `indydog_start':
indydog.c:(.text+0x54): undefined reference to `sgimc'
indydog.c:(.text+0x58): undefined reference to `sgimc'
drivers/watchdog/indydog.o: In function `indydog_stop':
indydog.c:(.text+0xa4): undefined reference to `sgimc'
drivers/watchdog/indydog.o:indydog.c:(.text+0xa8): more undefined
references to `sgimc' follow
make: *** [Makefile:1005: vmlinux] Error 1
Fix this by ensuring that CONFIG_INDIDOG can only be selected when the
necessary dependent platform symbols are built in.
Fixes:
da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: James Hogan <james.hogan@mips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 13 Feb 2018 09:19:50 +0000 (10:19 +0100)]
Linux 4.14.19
Greg Kroah-Hartman [Tue, 13 Feb 2018 09:14:14 +0000 (10:14 +0100)]
Revert "x86/alternative: Print unadorned pointers"
This reverts commit
67eb59b8ecfb319438706cee2cb67a3045b54494.
It's not needed in 4.14.y and only causes messy debugging messages, if
anyone actually cares about these random debug messages in the first
place (doubtful).
Reported-by: Kees Cook <keescook@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: riel@redhat.com
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: jikos@kernel.org
Cc: luto@amacapital.net
Cc: dave.hansen@intel.com
Cc: torvalds@linux-foundation.org
Cc: keescook@google.com
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Cc: pjt@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 16 Jan 2018 10:40:22 +0000 (13:40 +0300)]
scsi: storvsc: missing error code in storvsc_probe()
commit
ca8dc694045e9aa248e9916e0f614deb0494cb3d upstream.
We should set the error code if fc_remote_port_add() fails.
Cc: <stable@vger.kernel.org> #v4.12+
Fixes:
daf0cd445a21 ("scsi: storvsc: Add support for FC rport.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cathy Avery <cavery@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Long Li <longli@microsoft.com>
Andrew Morton [Fri, 5 Jan 2018 00:17:56 +0000 (16:17 -0800)]
kernel/exit.c: export abort() to modules
commit
dc8635b78cd8669c37e230058d18c33af7451ab1 upstream.
gcc -fisolate-erroneous-paths-dereference can generate calls to abort()
from modular code too.
[arnd@arndb.de: drop duplicate exports of abort()]
Link: http://lkml.kernel.org/r/20180102103311.706364-1-arnd@arndb.de
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Thu, 14 Dec 2017 23:33:19 +0000 (15:33 -0800)]
arch: define weak abort()
commit
7c2c11b208be09c156573fc0076b7b3646e05219 upstream.
gcc toggle -fisolate-erroneous-paths-dereference (default at -O2
onwards) isolates faulty code paths such as null pointer access, divide
by zero etc. If gcc port doesnt implement __builtin_trap, an abort() is
generated which causes kernel link error.
In this case, gcc is generating abort due to 'divide by zero' in
lib/mpi/mpih-div.c.
Currently 'frv' and 'arc' are failing. Previously other arch was also
broken like m32r was fixed by commit
d22e3d69ee1a ("m32r: fix build
failure").
Let's define this weak function which is common for all arch and fix the
problem permanently. We can even remove the arch specific 'abort' after
this is done.
Link: http://lkml.kernel.org/r/1513118956-8718-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Baronescu [Tue, 10 Oct 2017 10:21:59 +0000 (13:21 +0300)]
crypto: tcrypt - fix S/G table for test_aead_speed()
commit
5c6ac1d4f8fbdbed65dbeb8cf149d736409d16a1 upstream.
In case buffer length is a multiple of PAGE_SIZE,
the S/G table is incorrectly generated.
Fix this by handling buflen = k * PAGE_SIZE separately.
Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesse Chan [Mon, 20 Nov 2017 20:56:28 +0000 (15:56 -0500)]
media: soc_camera: soc_scale_crop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
commit
5331aec1bf9c9da557668174e0a4bfcee39f1121 upstream.
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o
see include/linux/module.h for more information
This adds the license as "GPL", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesse Chan [Mon, 20 Nov 2017 07:47:54 +0000 (02:47 -0500)]
media: mtk-vcodec: add missing MODULE_LICENSE/DESCRIPTION
commit
ccbc1e3876d5476fc23429690a683294ef0f755b upstream.
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o
see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION is also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 2 Feb 2018 18:27:27 +0000 (10:27 -0800)]
soreuseport: fix mem leak in reuseport_add_sock()
[ Upstream commit
4db428a7c9ab07e08783e0fcdc4ca0f555da0567 ]
reuseport_add_sock() needs to deal with attaching a socket having
its own sk_reuseport_cb, after a prior
setsockopt(SO_ATTACH_REUSEPORT_?BPF)
Without this fix, not only a WARN_ONCE() was issued, but we were also
leaking memory.
Thanks to sysbot and Eric Biggers for providing us nice C repros.
------------[ cut here ]------------
socket already in reuseport group
WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119
reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1dc/0x200 kernel/panic.c:547
report_bug+0x211/0x2d0 lib/bug.c:184
fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
fixup_bug arch/x86/kernel/traps.c:247 [inline]
do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079
Fixes:
ef456144da8e ("soreuseport: define reuseport groups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin KaFai Lau [Thu, 25 Jan 2018 07:15:27 +0000 (23:15 -0800)]
ipv6: Fix SO_REUSEPORT UDP socket with implicit sk_ipv6only
[ Upstream commit
7ece54a60ee2ba7a386308cae73c790bd580589c ]
If a sk_v6_rcv_saddr is !IPV6_ADDR_ANY and !IPV6_ADDR_MAPPED, it
implicitly implies it is an ipv6only socket. However, in inet6_bind(),
this addr_type checking and setting sk->sk_ipv6only to 1 are only done
after sk->sk_prot->get_port(sk, snum) has been completed successfully.
This inconsistency between sk_v6_rcv_saddr and sk_ipv6only confuses
the 'get_port()'.
In particular, when binding SO_REUSEPORT UDP sockets,
udp_reuseport_add_sock(sk,...) is called. udp_reuseport_add_sock()
checks "ipv6_only_sock(sk2) == ipv6_only_sock(sk)" before adding sk to
sk2->sk_reuseport_cb. In this case, ipv6_only_sock(sk2) could be
1 while ipv6_only_sock(sk) is still 0 here. The end result is,
reuseport_alloc(sk) is called instead of adding sk to the existing
sk2->sk_reuseport_cb.
It can be reproduced by binding two SO_REUSEPORT UDP sockets on an
IPv6 address (!ANY and !MAPPED). Only one of the socket will
receive packet.
The fix is to set the implicit sk_ipv6only before calling get_port().
The original sk_ipv6only has to be saved such that it can be restored
in case get_port() failed. The situation is similar to the
inet_reset_saddr(sk) after get_port() has failed.
Thanks to Calvin Owens <calvinowens@fb.com> who created an easy
reproduction which leads to a fix.
Fixes:
e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neal Cardwell [Wed, 31 Jan 2018 20:43:05 +0000 (15:43 -0500)]
tcp_bbr: fix pacing_gain to always be unity when using lt_bw
[ Upstream commit
3aff3b4b986e51bcf4ab249e5d48d39596e0df6a ]
This commit fixes the pacing_gain to remain at BBR_UNIT (1.0) when
using lt_bw and returning from the PROBE_RTT state to PROBE_BW.
Previously, when using lt_bw, upon exiting PROBE_RTT and entering
PROBE_BW the bbr_reset_probe_bw_mode() code could sometimes randomly
end up with a cycle_idx of 0 and hence have bbr_advance_cycle_phase()
set a pacing gain above 1.0. In such cases this would result in a
pacing rate that is 1.25x higher than intended, potentially resulting
in a high loss rate for a little while until we stop using the lt_bw a
bit later.
This commit is a stable candidate for kernels back as far as 4.9.
Fixes:
0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reported-by: Beyers Cronje <bcronje@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Pirko [Thu, 1 Feb 2018 11:21:15 +0000 (12:21 +0100)]
rocker: fix possible null pointer dereference in rocker_router_fib_event_work
[ Upstream commit
a83165f00f16c0e0ef5b7cec3cbd0d4788699265 ]
Currently, rocker user may experience following null pointer
derefence bug:
[ 3.062141] BUG: unable to handle kernel NULL pointer dereference at
00000000000000d0
[ 3.065163] IP: rocker_router_fib_event_work+0x36/0x110 [rocker]
The problem is uninitialized rocker->wops pointer that is initialized
only with the first initialized port. So move the port initialization
before registering the fib events.
Fixes:
936bd486564a ("rocker: use FIB notifications instead of switchdev calls")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Fri, 26 Jan 2018 04:16:29 +0000 (20:16 -0800)]
net: ipv6: send unsolicited NA after DAD
[ Upstream commit
c76fe2d98c726224a975a0d0198c3fb50406d325 ]
Unsolicited IPv6 neighbor advertisements should be sent after DAD
completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic
addresses and have those sent by addrconf_dad_completed after DAD.
Fixes:
4a6e3c5def13c ("net: ipv6: send unsolicited NA on admin up")
Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Gushchin [Fri, 2 Feb 2018 15:26:57 +0000 (15:26 +0000)]
Revert "defer call to mem_cgroup_sk_alloc()"
[ Upstream commit
edbe69ef2c90fc86998a74b08319a01c508bd497 ]
This patch effectively reverts commit
9f1c2674b328 ("net: memcontrol:
defer call to mem_cgroup_sk_alloc()").
Moving mem_cgroup_sk_alloc() to the inet_csk_accept() completely breaks
memcg socket memory accounting, as packets received before memcg
pointer initialization are not accounted and are causing refcounting
underflow on socket release.
Actually the free-after-use problem was fixed by
commit
c0576e397508 ("net: call cgroup_sk_alloc() earlier in
sk_clone_lock()") for the cgroup pointer.
So, let's revert it and call mem_cgroup_sk_alloc() just before
cgroup_sk_alloc(). This is safe, as we hold a reference to the socket
we're cloning, and it holds a reference to the memcg.
Also, let's drop BUG_ON(mem_cgroup_is_root()) check from
mem_cgroup_sk_alloc(). I see no reasons why bumping the root
memcg counter is a good reason to panic, and there are no realistic
ways to hit it.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Thu, 25 Jan 2018 14:03:52 +0000 (22:03 +0800)]
vhost_net: stop device during reset owner
[ Upstream commit
4cd879515d686849eec5f718aeac62a70b067d82 ]
We don't stop device before reset owner, this means we could try to
serve any virtqueue kick before reset dev->worker. This will result a
warn since the work was pending at llist during owner resetting. Fix
this by stopping device during owner reset.
Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com
Fixes:
3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li RongQing [Fri, 26 Jan 2018 08:40:41 +0000 (16:40 +0800)]
tcp: release sk_frag.page in tcp_disconnect
[ Upstream commit
9b42d55a66d388e4dd5550107df051a9637564fc ]
socket can be disconnected and gets transformed back to a listening
socket, if sk_frag.page is not released, which will be cloned into
a new socket by sk_clone_lock, but the reference count of this page
is increased, lead to a use after free or double free issue
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunhao Lin [Tue, 30 Jan 2018 17:32:36 +0000 (01:32 +0800)]
r8169: fix RTL8168EP take too long to complete driver initialization.
[ Upstream commit
086ca23d03c0d2f4088f472386778d293e15c5f6 ]
Driver check the wrong register bit in rtl_ocp_tx_cond() that keep driver
waiting until timeout.
Fix this by waiting for the right register bit.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristian Evensen [Tue, 30 Jan 2018 13:12:55 +0000 (14:12 +0100)]
qmi_wwan: Add support for Quectel EP06
[ Upstream commit
c0b91a56a2e57a5a370655b25d677ae0ebf8a2d0 ]
The Quectel EP06 is a Cat. 6 LTE modem. It uses the same interface as
the EC20/EC25 for QMI, and requires the same "set DTR"-quirk to work.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Mon, 29 Jan 2018 09:53:42 +0000 (17:53 +0800)]
qlcnic: fix deadlock bug
[ Upstream commit
233ac3891607f501f08879134d623b303838f478 ]
The following soft lockup was caught. This is a deadlock caused by
recusive locking.
Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in
qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin
lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable
bh..
[161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016]
[161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod
[161846.962454]
[161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2
[161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS
26050100 09/19/2017
[161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic]
[161846.962493] task:
ffff8801f2e34600 ti:
ffff88004ca5c000 task.ti:
ffff88004ca5c000
[161846.962496] RIP: e030:[<
ffffffff810013aa>] [<
ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20
[161846.962506] RSP: e02b:
ffff880202e43388 EFLAGS:
00000206
[161846.962509] RAX:
0000000000000000 RBX:
ffff8801f6996b70 RCX:
ffffffff810013aa
[161846.962511] RDX:
ffff880202e433cc RSI:
ffff880202e433b0 RDI:
0000000000000003
[161846.962513] RBP:
ffff880202e433d0 R08:
0000000000000000 R09:
ffff8801fe893200
[161846.962516] R10:
ffff8801fe400538 R11:
0000000000000206 R12:
ffff880202e4b000
[161846.962518] R13:
0000000000000050 R14:
0000000000000001 R15:
000000000000020d
[161846.962528] FS:
0000000000000000(0000) GS:
ffff880202e40000(0000) knlGS:
ffff880202e40000
[161846.962531] CS: e033 DS: 0000 ES: 0000 CR0:
0000000080050033
[161846.962533] CR2:
0000000002612640 CR3:
00000001bb796000 CR4:
0000000000042660
[161846.962536] Stack:
[161846.962538]
ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0
[161846.962543]
0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000
[161846.962547]
00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440
[161846.962552] Call Trace:
[161846.962555] <IRQ>
[161846.962565] [<
ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50
[161846.962570] [<
ffffffff813f0460>] xen_poll_irq+0x10/0x20
[161846.962578] [<
ffffffff81014222>] xen_lock_spinning+0xe2/0x110
[161846.962583] [<
ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20
[161846.962592] [<
ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80
[161846.962609] [<
ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic]
[161846.962623] [<
ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic]
[161846.962636] [<
ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic]
[161846.962649] [<
ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic]
[161846.962657] [<
ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650
[161846.962670] [<
ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic]
[161846.962682] [<
ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic]
[161846.962691] [<
ffffffff8160ac22>] xmit_one+0x82/0x1a0
[161846.962696] [<
ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0
[161846.962701] [<
ffffffff81630112>] sch_direct_xmit+0x112/0x220
[161846.962706] [<
ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0
[161846.962710] [<
ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20
[161846.962721] [<
ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding]
[161846.962729] [<
ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding]
[161846.962736] [<
ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding]
[161846.962740] [<
ffffffff8160ac22>] xmit_one+0x82/0x1a0
[161846.962745] [<
ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0
[161846.962749] [<
ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0
[161846.962754] [<
ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20
[161846.962760] [<
ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q]
[161846.962764] [<
ffffffff8160ac22>] xmit_one+0x82/0x1a0
[161846.962769] [<
ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0
[161846.962773] [<
ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0
[161846.962777] [<
ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20
[161846.962789] [<
ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge]
[161846.962797] [<
ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge]
[161846.962807] [<
ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100
[161846.962811] [<
ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0
[161846.962818] [<
ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge]
[161846.962822] [<
ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0
[161846.962829] [<
ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230
[161846.962836] [<
ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge]
[161846.962845] [<
ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge]
[161846.962853] [<
ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge]
[161846.962862] [<
ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge]
[161846.962867] [<
ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870
[161846.962872] [<
ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70
[161846.962877] [<
ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90
[161846.962884] [<
ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback]
[161846.962889] [<
ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50
[161846.962893] [<
ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90
[161846.962899] [<
ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback]
[161846.962906] [<
ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback]
[161846.962915] [<
ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback]
[161846.962920] [<
ffffffff8160e01b>] napi_poll+0xcb/0x1e0
[161846.962925] [<
ffffffff8160e1c0>] net_rx_action+0x90/0x1c0
[161846.962931] [<
ffffffff8108aaba>] __do_softirq+0x10a/0x350
[161846.962938] [<
ffffffff8108ae75>] irq_exit+0x125/0x130
[161846.962943] [<
ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50
[161846.962950] [<
ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40
[161846.962952] <EOI>
[161846.962959] [<
ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80
[161846.962964] [<
ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0
[161846.962978] [<
ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic]
[161846.962991] [<
ffffffff810a14e1>] ? process_one_work+0x151/0x4b0
[161846.962995] [<
ffffffff8100c3f2>] ? check_events+0x12/0x20
[161846.963001] [<
ffffffff810a1960>] ? worker_thread+0x120/0x480
[161846.963005] [<
ffffffff816e187b>] ? __schedule+0x30b/0x890
[161846.963010] [<
ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0
[161846.963015] [<
ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0
[161846.963021] [<
ffffffff810a6b3e>] ? kthread+0xce/0xf0
[161846.963025] [<
ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70
[161846.963031] [<
ffffffff816e6522>] ? ret_from_fork+0x42/0x70
[161846.963035] [<
ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70
[161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 1 Feb 2018 18:26:57 +0000 (10:26 -0800)]
net: igmp: add a missing rcu locking section
[ Upstream commit
e7aadb27a5415e8125834b84a74477bfbee4eff5 ]
Newly added igmpv3_get_srcaddr() needs to be called under rcu lock.
Timer callbacks do not ensure this locking.
=============================
WARNING: suspicious RCU usage
4.15.0+ #200 Not tainted
-----------------------------
./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syzkaller616973/4074:
#0: (&mm->mmap_sem){++++}, at: [<
00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355
#1: ((&im->timer)){+.-.}, at: [<
00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline]
#1: ((&im->timer)){+.-.}, at: [<
00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316
#2: (&(&im->lock)->rlock){+.-.}, at: [<
000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline]
#2: (&(&im->lock)->rlock){+.-.}, at: [<
000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600
stack backtrace:
CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592
__in_dev_get_rcu include/linux/inetdevice.h:216 [inline]
igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline]
igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389
add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432
add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565
igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605
igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722
igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831
call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
expire_timers kernel/time/timer.c:1363 [inline]
__run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285
invoke_softirq kernel/softirq.c:365 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:541 [inline]
smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938
Fixes:
a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 31 Jan 2018 14:29:30 +0000 (16:29 +0200)]
ip6mr: fix stale iterator
[ Upstream commit
4adfa79fc254efb7b0eb3cd58f62c2c3f805f1ba ]
When we dump the ip6mr mfc entries via proc, we initialize an iterator
with the table to dump but we don't clear the cache pointer which might
be initialized from a prior read on the same descriptor that ended. This
can result in lock imbalance (an unnecessary unlock) leading to other
crashes and hangs. Clear the cache pointer like ipmr does to fix the issue.
Thanks for the reliable reproducer.
Here's syzbot's trace:
WARNING: bad unlock balance detected!
4.15.0-rc3+ #128 Not tainted
syzkaller971460/3195 is trying to release lock (mrt_lock) at:
[<
000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553
but there are no more locks to release!
other info that might help us debug this:
1 lock held by syzkaller971460/3195:
#0: (&p->lock){+.+.}, at: [<
00000000744a6565>] seq_read+0xd5/0x13d0
fs/seq_file.c:165
stack backtrace:
CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561
__lock_release kernel/locking/lockdep.c:3775 [inline]
lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023
__raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline]
_raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255
ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553
traverse+0x3bc/0xa00 fs/seq_file.c:135
seq_read+0x96a/0x13d0 fs/seq_file.c:189
proc_reg_read+0xef/0x170 fs/proc/inode.c:217
do_loop_readv_writev fs/read_write.c:673 [inline]
do_iter_read+0x3db/0x5b0 fs/read_write.c:897
compat_readv+0x1bf/0x270 fs/read_write.c:1140
do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189
C_SYSC_preadv fs/read_write.c:1209 [inline]
compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203
do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125
RIP: 0023:0xf7f73c79
RSP: 002b:
00000000e574a15c EFLAGS:
00000292 ORIG_RAX:
000000000000014d
RAX:
ffffffffffffffda RBX:
000000000000000f RCX:
0000000020a3afb0
RDX:
0000000000000001 RSI:
0000000000000067 RDI:
0000000000000000
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
BUG: sleeping function called from invalid context at lib/usercopy.c:25
in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460
INFO: lockdep is turned off.
CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060
__might_sleep+0x95/0x190 kernel/sched/core.c:6013
__might_fault+0xab/0x1d0 mm/memory.c:4525
_copy_to_user+0x2c/0xc0 lib/usercopy.c:25
copy_to_user include/linux/uaccess.h:155 [inline]
seq_read+0xcb4/0x13d0 fs/seq_file.c:279
proc_reg_read+0xef/0x170 fs/proc/inode.c:217
do_loop_readv_writev fs/read_write.c:673 [inline]
do_iter_read+0x3db/0x5b0 fs/read_write.c:897
compat_readv+0x1bf/0x270 fs/read_write.c:1140
do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189
C_SYSC_preadv fs/read_write.c:1209 [inline]
compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203
do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125
RIP: 0023:0xf7f73c79
RSP: 002b:
00000000e574a15c EFLAGS:
00000292 ORIG_RAX:
000000000000014d
RAX:
ffffffffffffffda RBX:
000000000000000f RCX:
0000000020a3afb0
RDX:
0000000000000001 RSI:
0000000000000067 RDI:
0000000000000000
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0
lib/usercopy.c:26
Reported-by: syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Sat, 30 Sep 2017 01:10:10 +0000 (10:10 +0900)]
kbuild: rpm-pkg: keep spec file until make mrproper
commit
af60e207087975d069858741c44ed4f450330ac4 upstream.
If build fails during (bin)rpm-pkg, the spec file is not cleaned by
anyone until the next successful build of the package.
We do not have to immediately delete the spec file in case somebody
may want to take a look at it. Instead, make them ignored by git,
and cleaned up by make mrproper.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Mon, 30 Oct 2017 15:33:46 +0000 (00:33 +0900)]
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
commit
10b62a2f785ab55857380f0c63d9fa468fd8c676 upstream.
Most of DT files are compiled under arch/*/boot/dts/, but we have some
other directories, like drivers/of/unittest-data/. We often miss to
add gitignore patterns per directory. Since there are no source files
that end with .dtb or .dtb.S, we can ignore the patterns globally.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Mon, 30 Oct 2017 15:33:45 +0000 (00:33 +0900)]
.gitignore: sort normal pattern rules alphabetically
commit
1377dd3e29878b8f5d9f5c9000975f50a428a0cd upstream.
We are having more and more ignore patterns. Sort the list
alphabetically. We will easily catch duplicated patterns if any.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 7 Feb 2018 19:12:26 +0000 (11:12 -0800)]
Linux 4.14.18
Ian Abbott [Wed, 15 Nov 2017 22:33:12 +0000 (16:33 -0600)]
fpga: region: release of_parse_phandle nodes after use
commit
0f5eb1545907edeea7672a9c1652c4231150ff22 upstream.
Both fpga_region_get_manager() and fpga_region_get_bridges() call
of_parse_phandle(), but nothing calls of_node_put() on the returned
struct device_node pointers. Make sure to do that to stop their
reference counters getting out of whack.
Fixes:
0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Andrzej Siewior [Thu, 11 Jan 2018 17:57:26 +0000 (18:57 +0100)]
serial: core: mark port as initialized after successful IRQ change
commit
44117a1d1732c513875d5a163f10d9adbe866c08 upstream.
setserial changes the IRQ via uart_set_info(). It invokes
uart_shutdown() which free the current used IRQ and clear
TTY_PORT_INITIALIZED. It will then update the IRQ number and invoke
uart_startup() before returning to the caller leaving
TTY_PORT_INITIALIZED cleared.
The next open will crash with
| list_add double add: new=
ffffffff839fcc98, prev=
ffffffff839fcc98, next=
ffffffff839fcc98.
since the close from the IOCTL won't free the IRQ (and clean the list)
due to the TTY_PORT_INITIALIZED check in uart_shutdown().
There is same pattern in uart_do_autoconfig() and I *think* it also
needs to set TTY_PORT_INITIALIZED there.
Is there a reason why uart_startup() does not set the flag by itself
after the IRQ has been acquired (since it is cleared in uart_shutdown)?
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Sat, 3 Feb 2018 14:56:23 +0000 (15:56 +0100)]
KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
commit
b2ac58f90540e39324e7a29a7ad471407ae0bf48
[ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ]
... basically doing exactly what we do for VMX:
- Passthrough SPEC_CTRL to guests (if enabled in guest CPUID)
- Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest
actually used it.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Thu, 1 Feb 2018 21:59:45 +0000 (22:59 +0100)]
KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
commit
d28b387fb74da95d69d2615732f50cceb38e9a4d
[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ]
Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for
guests that will only mitigate Spectre V2 through IBRS+IBPB and will not
be using a retpoline+IBPB based approach.
To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for
guests that do not actually use the MSR, only start saving and restoring
when a non-zero is written to it.
No attempt is made to handle STIBP here, intentionally. Filtering STIBP
may be added in a future patch, which may require trapping all writes
if we don't want to pass it through directly to the guest.
[dwmw2: Clean up CPUID bits, save/restore manually, handle reset]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Thu, 1 Feb 2018 21:59:44 +0000 (22:59 +0100)]
KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
commit
28c1c9fabf48d6ad596273a11c46e0d0da3e14cd
Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO
(bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the
contents will come directly from the hardware, but user-space can still
override it.
[dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-4-git-send-email-karahmed@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashok Raj [Thu, 1 Feb 2018 21:59:43 +0000 (22:59 +0100)]
KVM/x86: Add IBPB support
commit
15d45071523d89b3fb7372e2135fbd72f6af9506
The Indirect Branch Predictor Barrier (IBPB) is an indirect branch
control mechanism. It keeps earlier branches from influencing
later ones.
Unlike IBRS and STIBP, IBPB does not define a new mode of operation.
It's a command that ensures predicted branch targets aren't used after
the barrier. Although IBRS and IBPB are enumerated by the same CPUID
enumeration, IBPB is very different.
IBPB helps mitigate against three potential attacks:
* Mitigate guests from being attacked by other guests.
- This is addressed by issing IBPB when we do a guest switch.
* Mitigate attacks from guest/ring3->host/ring3.
These would require a IBPB during context switch in host, or after
VMEXIT. The host process has two ways to mitigate
- Either it can be compiled with retpoline
- If its going through context switch, and has set !dumpable then
there is a IBPB in that path.
(Tim's patch: https://patchwork.kernel.org/patch/
10192871)
- The case where after a VMEXIT you return back to Qemu might make
Qemu attackable from guest when Qemu isn't compiled with retpoline.
There are issues reported when doing IBPB on every VMEXIT that resulted
in some tsc calibration woes in guest.
* Mitigate guest/ring0->host/ring0 attacks.
When host kernel is using retpoline it is safe against these attacks.
If host kernel isn't using retpoline we might need to do a IBPB flush on
every VMEXIT.
Even when using retpoline for indirect calls, in certain conditions 'ret'
can use the BTB on Skylake-era CPUs. There are other mitigations
available like RSB stuffing/clearing.
* IBPB is issued only for SVM during svm_free_vcpu().
VMX has a vmclear and SVM doesn't. Follow discussion here:
https://lkml.org/lkml/2018/1/15/146
Please refer to the following spec for more details on the enumeration
and control.
Refer here to get documentation about mitigations.
https://software.intel.com/en-us/side-channel-security-support
[peterz: rebase and changelog rewrite]
[karahmed: - rebase
- vmx: expose PRED_CMD if guest has it in CPUID
- svm: only pass through IBPB if guest has it in CPUID
- vmx: support !cpu_has_vmx_msr_bitmap()]
- vmx: support nested]
[dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS)
PRED_CMD is a write-only MSR]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: kvm@vger.kernel.org
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Thu, 1 Feb 2018 21:59:42 +0000 (22:59 +0100)]
KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX
commit
b7b27aa011a1df42728d1768fc181d9ce69e6911
[dwmw2: Stop using KF() for bits in it, too]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Link: https://lkml.kernel.org/r/1517522386-18410-2-git-send-email-karahmed@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darren Kenny [Fri, 2 Feb 2018 19:12:20 +0000 (19:12 +0000)]
x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
commit
af189c95a371b59f493dbe0f50c0a09724868881
Fixes:
117cc7a908c83 ("x86/retpoline: Fill return stack buffer on vmexit")
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180202191220.blvgkgutojecxr3b@starbug-vm.ie.oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 2 Feb 2018 21:39:23 +0000 (22:39 +0100)]
x86/pti: Mark constant arrays as __initconst
commit
4bf5d56d429cbc96c23d809a08f63cd29e1a702e
I'm seeing build failures from the two newly introduced arrays that
are marked 'const' and '__initdata', which are mutually exclusive:
arch/x86/kernel/cpu/common.c:882:43: error: 'cpu_no_speculation' causes a section type conflict with 'e820_table_firmware_init'
arch/x86/kernel/cpu/common.c:895:43: error: 'cpu_no_meltdown' causes a section type conflict with 'e820_table_firmware_init'
The correct annotation is __initconst.
Fixes:
fec9434a12f3 ("x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180202213959.611210-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Thu, 1 Feb 2018 11:27:21 +0000 (11:27 +0000)]
x86/spectre: Simplify spectre_v2 command line parsing
commit
9005c6834c0ffdfe46afa76656bd9276cca864f6
[dwmw2: Use ARRAY_SIZE]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1517484441-1420-3-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Woodhouse [Thu, 1 Feb 2018 11:27:20 +0000 (11:27 +0000)]
x86/retpoline: Avoid retpolines for built-in __init functions
commit
66f793099a636862a71c59d4a6ba91387b155e0c
There's no point in building init code with retpolines, since it runs before
any potentially hostile userspace does. And before the retpoline is actually
ALTERNATIVEd into place, for much of it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: karahmed@amazon.de
Cc: peterz@infradead.org
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1517484441-1420-2-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Thu, 1 Feb 2018 01:47:03 +0000 (17:47 -0800)]
x86/kvm: Update spectre-v1 mitigation
commit
085331dfc6bbe3501fb936e657331ca943827600
Commit
75f139aaf896 "KVM: x86: Add memory barrier on vmcs field lookup"
added a raw 'asm("lfence");' to prevent a bounds check bypass of
'vmcs_field_to_offset_table'.
The lfence can be avoided in this path by using the array_index_nospec()
helper designed for these types of fixes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andrew Honig <ahonig@google.com>
Cc: kvm@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Link: https://lkml.kernel.org/r/151744959670.6342.3001723920950249067.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Tue, 16 Jan 2018 15:51:18 +0000 (16:51 +0100)]
KVM: VMX: make MSR bitmaps per-VCPU
commit
904e14fb7cb96401a7dc803ca2863fd5ba32ffe6
Place the MSR bitmap in struct loaded_vmcs, and update it in place
every time the x2apic or APICv state can change. This is rare and
the loop can handle 64 MSRs per iteration, in a similar fashion as
nested_vmx_prepare_msr_bitmap.
This prepares for choosing, on a per-VM basis, whether to intercept
the SPEC_CTRL and PRED_CMD MSRs.
Cc: stable@vger.kernel.org # prereq for Spectre mitigation
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Wed, 31 Jan 2018 04:13:33 +0000 (22:13 -0600)]
x86/paravirt: Remove 'noreplace-paravirt' cmdline option
commit
12c69f1e94c89d40696e83804dd2f0965b5250cd
The 'noreplace-paravirt' option disables paravirt patching, leaving the
original pv indirect calls in place.
That's highly incompatible with retpolines, unless we want to uglify
paravirt even further and convert the paravirt calls to retpolines.
As far as I can tell, the option doesn't seem to be useful for much
other than introducing surprising corner cases and making the kernel
vulnerable to Spectre v2. It was probably a debug option from the early
paravirt days. So just remove it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20180131041333.2x6blhxirc2kclrq@treble
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Chen [Mon, 29 Jan 2018 22:04:47 +0000 (22:04 +0000)]
x86/speculation: Use Indirect Branch Prediction Barrier in context switch
commit
18bf3c3ea8ece8f03b6fc58508f2dfd23c7711c7
Flush indirect branches when switching into a process that marked itself
non dumpable. This protects high value processes like gpg better,
without having too high performance overhead.
If done naïvely, we could switch to a kernel idle thread and then back
to the original process, such as:
process A -> idle -> process A
In such scenario, we do not have to do IBPB here even though the process
is non-dumpable, as we are switching back to the same process after a
hiatus.
To avoid the redundant IBPB, which is expensive, we track the last mm
user context ID. The cost is to have an extra u64 mm context id to track
the last mm we were using before switching to the init_mm used by idle.
Avoiding the extra IBPB is probably worth the extra memory for this
common scenario.
For those cases where tlb_defer_switch_to_init_mm() returns true (non
PCID), lazy tlb will defer switch to init_mm, so we will not be changing
the mm for the process A -> idle -> process A switch. So IBPB will be
skipped for this case.
Thanks to the reviewers and Andy Lutomirski for the suggestion of
using ctx_id which got rid of the problem of mm pointer recycling.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: linux@dominikbrodowski.net
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: luto@kernel.org
Cc: pbonzini@redhat.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517263487-3708-1-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-exynos.git / log