media: hevc: Remove RPS named flags

Marking a picture as long-term reference is valid for DPB but not for RPS.
Change flag name to match with the description in HEVC spec chapter
"8.3.2 Decoding process for reference picture set".

PocStCurrBefore, PocStCurrAfter, PocLtCurr lists could be built by the
kernel from the DPB entries struct v4l2_hevc_dpb_entry, using the
information in the rps field. This way RPS flags becomes useless and are
removed.

This patch breaks the staging HEVC API because it introduces a new flag,
changes a field name in v4l2_hevc_dpb_entry structure and removes
V4L2_HEVC_DPB_ENTRY_RPS_* flags.

[hverkuil: fixed some typos]

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc: add raw Bayer 8bit 10bit output formats

The ISC can dump the 8 bit and 10 bit raw bayer formats directly to
the memory.
Thus, add them to the supported output format list.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-sama7g5-isc: fix UYVY input format mbus_code typo

Fix the mbus code for UYVY input format type to the right color rotation.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc-base: clamp wb gain coefficients

White balance computed gains can overflow above the 13 bits hardware
coefficient that can be used, in some specific scenarios like a subexposure
from the sensor when the image is mostly black.
In this case the computed gain has to be clamped to the maximum value
allowed by the hardware.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc-base: add wb debug messages

Add debug messages that make it easier to debug white balance algorithm.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc-base: fix bytesperline value for planar formats

The bytesperline field of the pixfmt should be only for the first plane
in case of planar formats like YUV420 or YUV422.
The bytesperline is used by the driver to compute the framesize.
We have to report a different bpp (bytes per pixel) to v4l2 in bytesperline
than the actual bpp.
For example for YUV420, the real bpp is 12, but the first plane has only
8 bpp. Thus we report a bytesperline 8*width instead of 12*width.
However, for real framezise we have to compute 12*width*height.
Hence added a new variable to hold this information and to correctly
compute the frame size.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc-base: report frame sizes as full supported range

The ISC supports a full broad range of frame sizes.
Until now, the subdevice was queried for possible frame sizes and these
were reported to the user space.
However, the ISC should not care about which frame sizes the subdev
supports, as long as this frame size is supported.
Thus, report a continuous range from smallest frame size up to the max
resolution.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc-base: remove frameintervals VIDIOC

VIDIOC_ENUM_FRAMEINTERVALS is not recommended for a top video driver.
The frame rate is defined by the sensor subdevice, thus it can be queried
directly by anyone interested in the frame intervals.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-sama7g5-isc: fix ispck leftover

The ispck is not used for sama7g5 variant of the ISC.
Calls to ispck have to be removed also from module insert/removal.

Fixes: d7f26849ed7c ("media: atmel: fix the ispck initialization")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc: replace video device name with module name

To have consistency with future media controller development,
replace the video device name with KBUILD_MODNAME.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: atmel-isc: split the clock code into separate source file

The atmel-isc-base is getting crowded. Split the clock functions into
atmel-isc-clk.c.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: atmel: introduce microchip csi2dc driver

Microchip CSI2DC (CSI2 Demultiplexer Controller) is a misc bridge device
that converts a byte stream in IDI Synopsys format (coming from a CSI2HOST)
to a pixel stream that can be captured by a sensor controller.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: atmel: csi2dc: add bindings for microchip csi2dc

Add bindings documentation for Microchip CSI2 Demultiplexer controller.

CSI2DC is a demultiplexer from Synopsys IDI interface specification to
parallel interface connection or direct memory access.
CSI2DC can also act as a parallel bypass from a parallel sensor to the
image sensor controller/interface.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: MAINTAINERS: add microchip csi2dc

Add Microchip CSI2DC driver in the list.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: stm32: dcmi: create a dma scatterlist based on DMA max_sg_burst value

Prior to submitting a transfer to the DMA, the client should first check
the capabilities of the DMA channel in term of maximum of each segment.
This is given by the max_sg_burst value reported by dma_get_slave_caps API.
Based on that, if the transfer is larger than what can be handled by the
DMA channel, we split the transfer into several scatterlist elements.

[hverkuil: fix checkpatch parenthesis alignment warning]

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-ctrls: make array range static

Don't populate the read-only array range on the stack but
instead it static. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: media/radio: make array probe_ports static const

Don't populate the read-only array probe_ports on the stack but
instead it static const. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: gspca: make array regs_to_read static const

Don't populate the read-only array regs_to_read on the stack but
instead it static const. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: bttv: fix WARNING regression on tunerless devices

Commit 2161536516ed ("media: media/pci: set device_caps in struct video_device")
introduced a regression: V4L2_CAP_TUNER is always present in device_caps,
even when the device has no tuner.

This causes a warning:
WARNING: CPU: 0 PID: 249 at drivers/media/v4l2-core/v4l2-ioctl.c:1102 v4l_querycap+0xa0/0xb0 [videodev]

Fixes: 2161536516ed ("media: media/pci: set device_caps in struct video_device")
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx-jpeg: use NV12M to represent non contiguous NV12

V4L2_PIX_FMT_NV12 requires num_planes equals to 1,
V4L2_PIX_FMT_NV12M requires num_planes equals to 2.
and mxc-jpeg supports 2 planes for nv12,
so we should use 4L2_PIX_FMT_NV12M instead of V4L2_PIX_FMT_NV12,
otherwise it will confuses gstreamer and prevent encoding and decoding.

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: davinci: vpif: drop probe printk

Drivers should generally not print anything for a successful probe, and
printing "success" before probe is done makes no sense.

Drop the unnecessary and misleading dev_info() call from probe.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: davinci: vpif: fix use-after-free on driver unbind

The driver allocates and registers two platform device structures during
probe, but the devices were never deregistered on driver unbind.

This results in a use-after-free on driver unbind as the device
structures were allocated using devres and would be freed by driver
core when remove() returns.

Fix this by adding the missing deregistration calls to the remove()
callback and failing probe on registration errors.

Note that the platform device structures must be freed using a proper
release callback to avoid leaking associated resources like device
names.

Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support")
Cc: stable@vger.kernel.org # 4.12
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: davinci: vpif: fix unbalanced runtime PM enable

Make sure to disable runtime PM before returning on probe errors.

Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support")
Cc: stable@vger.kernel.org
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: davinci: vpif: fix unbalanced runtime PM get

Make sure to balance the runtime PM usage counter on driver unbind.

Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support")
Cc: stable@vger.kernel.org # 3.9
Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: cros-ec: Add brask to the match table

The Google Brask device uses the same approach as the Google Fizz
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: saa7134: use swap() to make code cleaner

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx: imx8mq-mipi_csi2: fix system resume

during system resume, interconnect bandwidth would currently be requested
even though the device is runtime suspended. This leaves the system in an
unbalanced state.

Fix that by only doing that in runtimem pm and splitting up runtime and
system suspend to be a more readable:
imx8mq_mipi_csi_pm_*() does the generic things called from system- and
runtime functions that each do specific things on top.

Fixes: f33fd8d77dd0 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation

The place where this register writel() that masks one interrupt is placed
does not guarantee that the device is powered so that's not allowed.
Moreover imx8mq_mipi_csi_start_stream() masks the interrupt anyway so the
write is not even needed. Remove it as this is a mistake that slipped in
with the driver.

Fixes: f33fd8d77dd0 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mtk-vcodec: potential dereference of null pointer

The return value of devm_kzalloc() needs to be checked.
To avoid use of null pointer in case of thefailure of alloc.

Fixes: 46233e91fa24 ("media: mtk-vcodec: move firmware implementations into their own files")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls

DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers
only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including
offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF
ioctls. This leads to differences in the values presented to userspace.
If userspace attempts to mmap the capture buffer directly using values
from DQBUF, it will fail.

Move the code that applies the magic offset into a helper, and call
that helper from all four ioctl entry points.

[hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret]

Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf")
Fixes: 908a0d7c588e ("[media] v4l: mem2mem: port to videobuf2")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: docs: vidioc-dqbuf: State all remaining fields are filled by driver

The specification for VIDIOC_DQBUF is slightly ambiguous on what fields
of |struct v4l2_buffer| is filled by the driver.

Reword it so things are clear: the driver fills in all remaining fields
not specified to be filled in by userspace applications.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vivid: fix timestamp and sequence wrapping

The error injection controls that test wrap-around sequence and timestamp
counters were partially broken. Add a menu option for 64 or 32 bit signed
timestamp wrapping. Prevent the timestamp from wrapping around before the
device can be tested.  Remove the sequence count from the timestamp
calculation so that sequence wrapping does not interfere with the
timestamp.  Add consistent time and sequence wrapping to sdr and touch
devices.

Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: fix grey format iommu page faults

Currently capturing grey format produces page faults
on both selfpath and mainpath. To support greyscale
we can capture YUV422 planar format and configure the U, V
buffers to the dummy buffer.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: imx: imx7-mipi-csis: Make subdev name unique

When multiple CSIS instances are present in a single graph, they are
currently all named "imx7-mipi-csis.0", which breaks the entity name
uniqueness requirement. Fix it by using the device name to create the
subdev name.

Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com> # On i.MX8MP
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: imx: imx7_mipi_csis: Add timings override through debugfs

Add two debugfs files, ths_settle and tclk_settle, to allow overriding
the corresponding timing parameters for test purpose.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com> # On i.MX8MP
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: imx: imx7-mipi-csis: Dump MIPI_CSIS_FRAME_COUNTER_CH0 register

The frame counter is useful debugging information, add it to the
register dump printed by mipi_csis_dump_regs().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com> # On i.MX8MP
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: Apply vfe_get/vfe_put fix to SDM845

Similar to the SM8250 the CSID relies on the VFE to be clocked prior to
taking the CSID out of reset.

Apply the same fixup to SDM845 as SM8250.

Suggested-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: Do vfe_get/vfe_put for csid on sm8250

The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on
and clocked prior to taking the CSID out of reset.

It is possible to open just the CSID subdev from libcamera and attempt to
bring the CSID block up.

If we do not first bring up the VFE the CSID will fail to come out of
reset.

Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: Add SM8250 bandwdith configuration support

Downstream makes some pretty explicit comments about voting for bus
bandwidth prior to camcc_camnoc_axi_clk_src. Working with camx downstream
also shows that the bandwidth vote is required to get that root clock
working.

Add a simple mechanism to declare set and unset named NOCs. Whereas the
objective is to enable the sm8250 specifically the code has been
implemented to allow setting of whatever NOCs different SoCs using this
driver may require.

Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: add support for SM8250 camss

The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID.

CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are
inside the VFE region (between the "top" and "bus" registers), so a
workaround is added to avoid ioremap failure.

[bod] Fixed setting camnoc_axi_clk_src instead of camcc_camnoc_axi_clk
[jgrahsl, bod] Add slow_ahb_src clock values
[jgrahsl, bod] Add cpa_ahb clock values

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW

Add this common format to the various format lists relevant to sdm845.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: Add initial support for VFE hardware version Titan 480

Add support for VFE found on SM8250 (Titan 480). This implementation is
based on the titan 170 implementation. It supports the normal and lite VFE,
and only supports the RDI0 capture path.

[bod: Updates hw_version callback]
[bod: Use static inline for macros reusing parameters checkpatch --strict]

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: vfe-170: fix "VFE halt timeout" error

This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: fix VFE irq name

vfe->id isn't set yet, so use "id" instead here.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: remove vdda-csiN from sdm845 resources

This isn't used and only works because devm_regulator_get() returns a dummy
regulator.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csid: allow csid to work without a regulator

At least for titan HW, CSID don't have an associated regulator. This change
is necessary to be able to model this in the CSID resources.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csid-170: set the right HALT_CMD when disabled

Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csid-170: support more than one lite vfe

Change the IS_LITE condition so that it returns true for the second lite
vfe found on titan 480 hardware (8250), which will have id == 3.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csid-170: remove stray comment

This is a leftover from my original patches, it doesn't serve any purpose.
(it was a reminder to figure out how downstream sets a particular field in
the register).

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csid-170: don't enable unused irqs

csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csid-170: fix non-10bit formats

Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csiphy-3ph: add support for SM8250 CSI DPHY

Add support for CSIPHY (2PH/DPHY mode) found on SM8250 hardware.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csiphy-3ph: disable interrupts

The driver does nothing with the interrupts, so set the irq mask registers
to zero to avoid wasting CPU time for nothing.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: camss: csiphy-3ph: don't print HW version as an error

Avoid unnecessary noise in normal usage (it prints every time CSIPHY is
powered on).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: camss: Add qcom,sm8250-camss binding

Add bindings for qcom,sm8250-camss in order to support the camera
subsystem for SM8250.

Cc: devicetree@vger.kernel.org
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: drop read/write support

This makes no sense for MJPEG formats and it is just easier to
drop support for this altogether.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: drop kernel log spam

Do not spam the kernel log with messages that result from incorrect
userspace input. Those should be either dropped completely (the error
code gives sufficient info) or changed to debug messages.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: fix TRY_FMT handling

TRY_FMT must not set actual capture values (zr->buffer_size in
this case), since it is a 'try' only.

zoran_try_fmt_vid_cap() also didn't fill in fmt->fmt.pix.bytesperline
and fmt->fmt.pix.sizeimage correctly.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: fix various V4L2 compliance errors

This fixes several issues found with 'v4l2-compliance -s':

1) read()/write() is supported, but not reported in the capabilities
2) S_STD(G_STD()) failed: setting the same standard should just return 0.
3) G_PARM failed to set readbuffers.
4) different field values in the format vs. what v4l2_buffer reported.
5) zero the sequence number when starting streaming.
6) drop VB_USERPTR: makes no sense with dma_contig streaming.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com

On the case tmp_dcim=1, the index of buffer is miscalculated.
This generate a NULL pointer dereference later.

So let's fix the calcul and add a check to prevent this to reappear.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: fix counting buffer in reserve

After each capture, zoran driver complains that it remains some unused
buffer. This is due to a missing count handling.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: clean unused code

It remains some unused code from old zoran buffer handling.
Let's remove them.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size

vb2_dma_contig_set_max_seg_size need to have a size in parameter and not
a DMA_BIT_MASK().
While fixing this issue, also fix error handling of all DMA size
setting.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: d4ae3689226e5 ("media: zoran: device support only 32bit DMA address")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: introduce zoran_i2c_init

Reduces the size of the probe function by adding zoran_i2c_init and
zoran_i2c_exit functions.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: move config select on primary kconfig

Since all kconfigs for card selection are bool, this causes all selected
modules to be always built-in.
Prevent this by moving selects to the main tristate kconfig.

By doing this, remove also all "if MEDIA_SUBDRV_AUTOSELECT" which are
wrong, since zoran always need them to work.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: move videodev alloc

Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: remove vidmem

The vidmem parameter is no longer necessary since we removed framebuffer
support.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: merge all modules

The zoran driver is split in many modules, but this lead to some
problems.
One of them is that load order is incorrect when everything is built-in.

Having more than one module is useless, so merge all zoran modules in
one.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: videocode: remove procfs

Now we have a debugfs, we can remove all PROCFS stuff.
We keep videocodec_debugfs_show(), it will be used later

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: add debugfs

Add debugfs for displaying zoran debug and stats information.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: rename debug module parameter

All zoran module will be merged, so to prevent conflict, the debug
module parameter need to be renamed

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: use module_pci_driver

Simplify code by using module_pci_driver()

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: zoran: move module parameter checks to zoran_probe

We need to empty zoran_init() for removing it later.
Furthermore, this permit to use pci_xxx instead of pr_xxx for prettier
printing.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Linux 5.17-rc1

Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Fix printing 'phys_addr' in 'perf script'.

 - Fix failure to add events with 'perf probe' in ppc64 due to not
   removing leading dot (ppc64 ABIv1).

 - Fix cpu_map__item() python binding building.

 - Support event alias in form foo-bar-baz, add pmu-events and
   parse-event tests for it.

 - No need to setup affinities when starting a workload or attaching to
   a pid.

 - Use path__join() to compose a path instead of ad-hoc snprintf()
   equivalent.

 - Override attr->sample_period for non-libpfm4 events.

 - Use libperf cpumap APIs instead of accessing the internal state
   directly.

 - Sync x86 arch prctl headers and files changed by the new
   set_mempolicy_home_node syscall with the kernel sources.

 - Remove duplicate include in cpumap.h.

 - Remove redundant err variable.

* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Remove redundant err variable
  perf test: Add parse-events test for aliases with hyphens
  perf test: Add pmu-events test for aliases with hyphens
  perf parse-events: Support event alias in form foo-bar-baz
  perf evsel: Override attr->sample_period for non-libpfm4 events
  perf cpumap: Remove duplicate include in cpumap.h
  perf cpumap: Migrate to libperf cpumap api
  perf python: Fix cpu_map__item() building
  perf script: Fix printing 'phys_addr' failure issue
  tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
  tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
  perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
  perf evlist: No need to setup affinities when disabling events for pid targets
  perf evlist: No need to setup affinities when enabling events for pid targets
  perf stat: No need to setup affinities when starting a workload
  perf affinity: Allow passing a NULL arg to affinity__cleanup()
  perf probe: Fix ppc64 'perf probe add events failed' case

Merge tag 'trace-v5.17-3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull ftrace fix from Steven Rostedt:
 "Fix s390 breakage from sorting mcount tables.

  The latest merge of the tracing tree sorts the mcount table at build
  time. But s390 appears to do things differently (like always) and
  replaces the sorted table back to the original unsorted one. As the
  ftrace algorithm depends on it being sorted, bad things happen when it
  is not, and s390 experienced those bad things.

  Add a new config to tell the boot if the mcount table is sorted or
  not, and allow s390 to opt out of it"

* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix assuming build time sort works for s390

ftrace: Fix assuming build time sort works for s390

To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.

Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.

Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'kbuild-fixes-v5.17' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage

 - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH

 - Fix build errors in certs/Makefile

* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
  Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
  usr/include/Makefile: add linux/nfc.h to the compile-test coverage

Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux

Pull bitmap updates from Yury Norov:

 - introduce for_each_set_bitrange()

 - use find_first_*_bit() instead of find_next_*_bit() where possible

 - unify for_each_bit() macros

* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
  vsprintf: rework bitmap_list_string
  lib: bitmap: add performance test for bitmap_print_to_pagebuf
  bitmap: unify find_bit operations
  mm/percpu: micro-optimize pcpu_is_populated()
  Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
  find: micro-optimize for_each_{set,clear}_bit()
  include/linux: move for_each_bit() macros from bitops.h to find.h
  cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
  tools: sync tools/bitmap with mother linux
  all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
  cpumask: use find_first_and_bit()
  lib: add find_first_and_bit()
  arch: remove GENERIC_FIND_FIRST_BIT entirely
  include: move find.h from asm_generic to linux
  bitops: move find_bit_*_le functions from le.h to find.h
  bitops: protect find_first_{,zero}_bit properly

perf tools: Remove redundant err variable

Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Add parse-events test for aliases with hyphens

Add a test which allows us to test parsing an event alias with hyphens.

Since these events typically do not exist on most host systems, add the
alias to the fake pmu.

Function perf_pmu__test_parse_init() has terms added to match known test
aliases.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Add pmu-events test for aliases with hyphens

Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf parse-events: Support event alias in form foo-bar-baz

Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.

The HiSilicon D06 platform has events in such form:

  $ ./perf list sdir-home-migrate

  List of pre-defined events (to be used in -e):

  uncore hha:
    sdir-home-migrate
   [Unit: hisi_sccl,hha]

  $ sudo ./perf stat -e sdir-home-migrate
  event syntax error: 'sdir-home-migrate'
                          \___ parser error
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

   -e, --event <event>event selector. use 'perf list' to list available events

To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Override attr->sample_period for non-libpfm4 events

A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.

Before said patch:

  perf record -c 10000 -e arm_spe_0// -- sleep 1

Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.

This patch restores the previous behaviour for non-libpfm4 events.

Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cpumap: Remove duplicate include in cpumap.h

Remove all but the first include of stdbool.h from cpumap.h.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cpumap: Migrate to libperf cpumap api

Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf python: Fix cpu_map__item() building

Value should be built as an integer.

Switch some uses of perf_cpu_map to use the library API.

Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Fix printing 'phys_addr' failure issue

Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.

Now referring to 'addr', use evsel__do_check_stype() to check the type.

Before:

  # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
  # perf script -F pid,tid,addr,phys_addr
  Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.

After:

  # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
  # perf script -F pid,tid,addr,phys_addr
  4064384/4064384 ffff802f921be0d0      2f921be0d0
  4064384/4064384 ffff802f921be0d0      2f921be0d0

Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty

Since b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove
config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty,
signing_key.x509 fails to build:

    CERT    certs/signing_key.x509
  Usage: extract-cert <source> <dest>
  make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2
  make: *** [Makefile:1831: certs] Error 2

Pass "" to the first argument of extract-cert to fix the build error.

Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u
Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Michal Kubecek <mkubecek@suse.cz>

certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI

When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:

  certs/Makefile:77: *** target pattern contains no '%'.  Stop.

Due to the typo, $(X509_DEP) contains a colon.

Fix it.

Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"

This reverts commit cd8c917a56f20f48748dd43d9ae3caff51d5b987.

Commit 129ab0d2d9f3 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.

Now reverting the temporary workaround.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

usr/include/Makefile: add linux/nfc.h to the compile-test coverage

As linux/nfc.h userspace compilation was finally fixed by commits
79b69a83705e ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c4e5f ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:
 "This is the post-linux-next queue. Material which was based on or
  dependent upon material which was in -next.

  69 patches.

  Subsystems affected by this patch series: mm (migration and zsmalloc),
  sysctl, proc, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
  mm: hide the FRONTSWAP Kconfig symbol
  frontswap: remove support for multiple ops
  mm: mark swap_lock and swap_active_head static
  frontswap: simplify frontswap_register_ops
  frontswap: remove frontswap_test
  mm: simplify try_to_unuse
  frontswap: remove the frontswap exports
  frontswap: simplify frontswap_init
  frontswap: remove frontswap_curr_pages
  frontswap: remove frontswap_shrink
  frontswap: remove frontswap_tmem_exclusive_gets
  frontswap: remove frontswap_writethrough
  mm: remove cleancache
  lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
  lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
  proc: remove PDE_DATA() completely
  fs: proc: store PDE()->data into inode->i_private
  zsmalloc: replace get_cpu_var with local_lock
  zsmalloc: replace per zpage lock with pool->migrate_lock
  locking/rwlocks: introduce write_lock_nested
  ...

Merge tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:

 - multichannel fixes, addressing additional reconnect and DFS scenarios

 - reenabling fscache support (indexing rewrite, metadata caching e.g.)

 - send additional version information during NTLMSSP negotiate to
   improve debugging

 - fix for a mount race

 - DFS fixes

 - fix for a memory leak for stable

* tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  smb3: send NTLMSSP version information
  cifs: Support fscache indexing rewrite
  cifs: cifs_ses_mark_for_reconnect should also update reconnect bits
  cifs: update tcpStatus during negotiate and sess setup
  cifs: make status checks in version independent callers
  cifs: remove repeated state change in dfs tree connect
  cifs: fix the cifs_reconnect path for DFS
  cifs: remove unused variable ses_selected
  cifs: protect all accesses to chan_* with chan_lock
  cifs: fix the connection state transitions with multichannel
  cifs: check reconnects for channels of active tcons too
  smb3: add new defines from protocol specification
  cifs: serialize all mount attempts
  cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs
  cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
  cifs: clean up an inconsistent indenting
  cifs: free ntlmsspblob allocated in negotiate

Merge tag 'xfs-5.17-merge-7' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "One of the patches removes some dead code from xfs_ioctl32.h and the
  other fixes broken workqueue flushing in the inode garbage collector.

   - Minor cleanup of ioctl32 cruft

   - Clean up open coded inodegc workqueue function calls"

* tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: flush inodegc workqueue tasks before cancel
  xfs: remove unused xfs_ioctl32.h declarations

Merge tag 'fscache-fixes-20220121' of git://git./linux/kernel/git/dhowells/linux-fs

Pull more fscache updates from David Howells:
 "A set of fixes and minor updates for the fscache rewrite:

   - Fix mishandling of volume collisions (the wait condition is
     inverted and so it was only waiting if the volume collision was
     already resolved).

   - Fix miscalculation of whether there's space available in
     cachefiles.

   - Make sure a default cache name is set on a cache if the user hasn't
     set one by the time they bind the cache.

   - Adjust the way the backing inode is presented in tracepoints, add a
     tracepoint for mkdir and trace directory lookup.

   - Add a tracepoint for failure to set the active file mark.

   - Add an explanation of the checks made on the backing filesystem.

   - Check that the backing filesystem supports tmpfile.

   - Document how the page-release cancellation of the read-skip
     optimisation works.

  And I've included a change for netfslib:

   - Make ops->init_rreq() optional"

* tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Make ops->init_rreq() optional
  fscache: Add a comment explaining how page-release optimisation works
  cachefiles: Check that the backing filesystem supports tmpfiles
  cachefiles: Explain checks in a comment
  cachefiles: Trace active-mark failure
  cachefiles: Make some tracepoint adjustments
  cachefiles: set default tag name if it's unspecified
  cachefiles: Calculate the blockshift in terms of bytes, not pages
  fscache: Fix the volume collision wait condition

Merge tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache

Pull more folio updates from Matthew Wilcox:
 "Three small folio patches.

  One bug fix, one patch pulled forward from the patches destined for
  5.18 and then a patch to make use of that functionality"

* tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache:
  filemap: Use folio_put_refs() in filemap_free_folio()
  mm: Add folio_put_refs()
  pagevec: Initialise folio_batch->percpu_pvec_drained

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: nsp_cs: Check of ioremap return value
  scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
  scsi: ufs: Modify Tactive time setting conditions
  scsi: efct: Remove useless DMA-32 fallback configuration
  scsi: message: fusion: mptctl: Use dma_alloc_coherent()
  scsi: message: fusion: mptsas: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
  scsi: message: fusion: mptbase: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
  scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
  scsi: megaraid: Avoid mismatched storage type sizes
  scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  scsi: aic79xx: Remove redundant error variable
  scsi: pm80xx: Port reset timeout error handling correction
  scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  scsi: mpi3mr: Fix some spelling mistakes
  scsi: mpt3sas: Update persistent trigger pages from sysfs interface
  scsi: core: Fix scsi_mode_select() interface
  scsi: aacraid: Fix spelling of "its"
  scsi: qedf: Fix potential dereference of NULL pointer

Merge tag 'ata-5.17-rc1-part2' of git://git./linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:
 "A single patch to fix a compilation error in the pata_octeon_cf driver
  (mips architecture), from me"

* tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()

Merge tag 'thermal-5.17-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "Add device IDs for Raptor Lake to the int340x thermal control driver
  (Srinivas Pandruvada)"

* tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: int340x: Add Raptor Lake PCI device id
  thermal: int340x: Support Raptor Lake