Aditya Prayoga [Wed, 19 Dec 2018 04:08:50 +0000 (12:08 +0800)]
arm: mvebu: configs: helios4: Change U-Boot offset on SPI Flash
SPI flash support on Helios4 [1] has been merge to u-boot/master on
commit
8cb8c0c6a83bef ("Merge git://git.denx.de/u-boot-marvell")
However, the SPI image build failed after the merge with following
message:
COPY spl/u-boot-spl.bin
MKIMAGE u-boot-spl.kwb
Error: Image header (incl. SPL image) too big!
header=0x20816 CONFIG_SYS_U_BOOT_OFFS=0x20000!
Increase CONFIG_SYS_U_BOOT_OFFS!
Error: Image header (incl. SPL image) too big!
header=0x20816 CONFIG_SYS_U_BOOT_OFFS=0x20000!
Increase CONFIG_SYS_U_BOOT_OFFS!
Could not create image
Makefile:1162: recipe for target 'u-boot-spl.kwb' failed
make: *** [u-boot-spl.kwb] Error 1
Let's increase the u-boot offset to 0x30000 to accommodate SPL changes
and leave some margin for future changes.
[1] https://patchwork.ozlabs.org/patch/1007762/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Fri, 14 Dec 2018 03:27:57 +0000 (16:27 +1300)]
ARM: mvebu: remove out of date comment
The Marvell DDR3 training code is now part of the U-Boot SPL so the
comment saying it needs porting is no longer correct.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Fri, 7 Dec 2018 03:19:42 +0000 (16:19 +1300)]
ARM: mvebu: define CONFIG_BLK for db-88f6820-amc
db-88f6820-amc uses CONFIG_DM_USB and CONFIG_USB_STORAGE already so
define CONFIG_BLK to prepare it for full conversion to DM.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Tom Rini [Tue, 18 Dec 2018 01:25:24 +0000 (20:25 -0500)]
Prepare v2019.01-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
Sam Protsenko [Tue, 11 Dec 2018 16:20:21 +0000 (18:20 +0200)]
arm: ti: boot: Increase system partition size
Android code base is growing, so since Android "Pie" the size of
system.img grew up to be about 740 MiB. Let's increase system.img to
1 GiB to accommodate for those changes and leave some margin for future
changes. We don't want to make it more than 1 GiB, because we should
keep userdata partition big enough (for user files, like media etc.),
and eMMC size on BeagleBoard-X15 is only 3.5 GiB.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
Chris Packham [Fri, 14 Dec 2018 22:35:54 +0000 (11:35 +1300)]
Makefile: output migration warnings to stderr
Output the device model migration warnings to stderr. This allows tools
like buildman to pick them up rather than suppressing them along with
the normal build output on stdout.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Stefano Babic [Mon, 17 Dec 2018 10:02:00 +0000 (11:02 +0100)]
Restore compatibility of image type IDs
Commit
a2b96ece5be146f4995d737f047e5bbb76079b8f breaks the enumeration
of the Image Types. New image types can be appended, but they cannot be
inserted in the list else backward compatibility is broken.
This restores the images types as before 2018.11 and move i.MX8 related
images at the end.
Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 17 Dec 2018 01:49:46 +0000 (20:49 -0500)]
Merge tag 'for-master-
20181216' of git://git.denx.de/u-boot-rockchip
Improvements and fixes or u-boot-rockchip:
- new board: adds rv1108-elgin-r1 board support
- rk3288-evb: dts: remove 'vmmc' from emmc node
- rk3399-puma: dts: remove obsolete DTS node 'vcc5v0_host'
Otavio Salvador [Sat, 1 Dec 2018 14:05:54 +0000 (12:05 -0200)]
ARM: rockchip: Add rv1108-elgin-r1 board support
Add the initial support for Elgin R1 board, which is based on the
RV1108 SoC and has the following features currently supported in
U-Boot:
- UART
- eMMC
- USB
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tom Rini [Sat, 15 Dec 2018 22:49:49 +0000 (17:49 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
- Second half of the USB Gadget DM conversion
Tom Rini [Sat, 15 Dec 2018 22:47:28 +0000 (17:47 -0500)]
Merge branch '2018-12-15-master-imports'
- Introduce tools-only build for host tools
- Bugfixes to poplar, syscon and the hashtable, a tee return code
- Fix a warning on gcc-8 by reworking part of mtk_image to be not unsafe
wrt strings.
- serial_stm32 reset support
Kever Yang [Fri, 14 Dec 2018 01:37:12 +0000 (09:37 +0800)]
rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
This is a sync with kernel mainline dts.
The U-Boot eMMC does not need to care about the power for Rockchip
SoCs, because if the board is using eMMC, the power will default on
(for bootrom), so the 'vmmc', 'vqmmc' is only useful for SD in U-Boot.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Christoph Muellner [Wed, 12 Dec 2018 00:32:59 +0000 (01:32 +0100)]
rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'.
vcc5v0_host and usbhub_enable share gpio4 RK_PA3,
which is a problem during probing (the second probe
will trigger a -EBUSY, when trying to get the gpio handle).
An analysis of the situation shows, that both regulators
are actually describing the same supply.
This patch removes the (currenlty not successful probing)
regulator vcc5v0_host from the DTS and adds the pinctrl-*
setting to usbhub_enable.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Phiilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Patrick Delaunay [Wed, 31 Oct 2018 15:49:03 +0000 (16:49 +0100)]
syscon: update syscon_node_to_regmap to use the DM functions
+ Update the function syscon_node_to_regmap() to force bound on
syscon uclass and directly use the list of device from DM.
+ Remove the static list syscon_list.
This patch avoid issue (crash) when syscon_node_to_regmap() is called
before and after reallocation (list content is invalid).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Andy Shevchenko [Tue, 11 Dec 2018 14:41:43 +0000 (16:41 +0200)]
tools: mtk_image: replace strncpy(d, s, sizeof(d)) with snprintf()
Starting from version 8 the GCC, i.e. C compiler, starts complaining about
possible '\0' terminator loss or, as in this case, garbage copy.
In function ‘mtk_image_set_gen_header’,
inlined from ‘mtk_image_set_header’ at tools/mtk_image.c:733:3:
tools/mtk_image.c:659:2: warning: ‘strncpy’ specified bound 12 equals destination size [-Wstringop-truncation]
strncpy(hdr->boot.name, bootname, sizeof(hdr->boot.name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘mtk_brom_parse_imagename’,
inlined from ‘mtk_image_check_params’ at tools/mtk_image.c:388:9:
tools/mtk_image.c:325:5: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(lk_name, val, sizeof(lk_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace it with snprintf() to tell compiler how much room we have in the
destination buffer for source string.
Fixes:
3b975a147c3c ("tools: MediaTek: add MTK boot header generation to mkimage")
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Patrice Chotard [Tue, 4 Dec 2018 13:11:36 +0000 (14:11 +0100)]
serial: serial_stm32: Add reset support
In some cases, UART is configured by early boot stage.
To be sure of the initial state of UART and to avoid
spurious chars on console, reset the serial block before
configuring it.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Shawn Guo [Wed, 12 Dec 2018 07:24:44 +0000 (15:24 +0800)]
poplar: fix boot failure caused by serial driver change
Commit
4687919684e0 ("serial: Remove DM_FLAG_PRE_RELOC flag in various
drivers") essentially drops flag DM_FLAG_PRE_RELOC from serial_pl01x
driver for Poplar platform, because the platform falls into the
following strategy category made by the commit.
Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
drivers that support both statically declared devices and
configuration from device tree
Before the commit lands, Poplar platform works by statically declaring
pl011 serial device via U_BOOT_DEVICE() with DM_FLAG_PRE_RELOC flag set
in the driver. But since Poplar also supports device configuration from
device tree, the commit practically drops the flag for Poplar, and hence
breaks the platform from booting.
This patch changes platform code and device tree to initiate pl011
serial device from device tree rather than static declaration, so that
above strategy about DM_FLAG_PRE_RELOC applies to Poplar, and therefore
the reported boot failure gets fixed.
Reported-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Fixes:
4687919684e0 ("serial: Remove DM_FLAG_PRE_RELOC flag in various drivers")
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Shawn Guo [Thu, 13 Dec 2018 09:10:43 +0000 (17:10 +0800)]
poplar: add a co-maintainer for poplar board
Add myself as co-maintainer for poplar board, as I'm actively working
on the board.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Otavio Salvador [Sat, 8 Dec 2018 00:00:41 +0000 (19:00 -0500)]
tools: add a generic config for native tools building
The motivation for this is to allow distributions to distribute all
possible tools in a generic way, avoiding the need of specific tools
building for each machine.
Especially on OpenEmbedded / Yocto Project ecosystem, it is very
common each BSP to end providing their specific tools when they need
to generate images for some SoC (e.g MX23 / MX28 in meta-freescale
case).
Using this, we can package the tools doing:
$: make tools-only_defconfig
$: make tools-only
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
[trini: Add MAINTAINERS entry for myself, add to .travis.yml, make
U-Boot itself buildable to not trip up other frameworks]
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 8 Dec 2018 00:00:40 +0000 (19:00 -0500)]
test: Only descend into test/ when CONFIG_UNIT_TEST is enabled
The contents of the test subdirectories only make sense when we have
CONFIG_UNIT_TEST set. We will otherwise attempt to build code on for
example sandbox that needs CONFIG_UNIT_TEST otherwise and rather than
complicate the Makefiles simply leave them out when we can.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 8 Dec 2018 00:00:39 +0000 (19:00 -0500)]
cmd: Move the "dm" command from test/dm/ to cmd/
The "dm" command under CONFIG_CMD_DM should live under cmd/ rather than
test/dm/ so move it.
Signed-off-by: Tom Rini <trini@konsulko.com>
AKASHI Takahiro [Fri, 14 Dec 2018 09:42:51 +0000 (18:42 +0900)]
hashtable: fix length calculation in hexport_r
The commit below incorrectly fixed hexport_r();
> size = totlen + 1;
One extra byte is necessary to NULL-terminate a whole buffer, "resp."
Fixes:
f1b20acb4a03 ("hashtable: Fix length calculation in hexport_r")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Igor Opaniuk [Tue, 4 Dec 2018 12:37:19 +0000 (14:37 +0200)]
tee: change return code for REE FS supplicant cmd
If OP-TEE core is compiled with support of REE FS and RPMB
at the same time (CFG_RPMB_FS ?= y; CFG_RPMB_FS ?= y), and persistent
storage API is used with TEE_STORAGE_PRIVATE storage id, it will
lead to TA panic.
E/TC:? 0 TA panicked with code 0xffff0009
.....
E/TC:? 0 Call stack:
E/TC:? 0 0x000000004002f2f8 TEE_OpenPersistentObject at
lib/libutee/tee_api_objects.c:422
In this particular case TEE_ERROR_STORAGE_NOT_AVAILABLE is more suitable
than TEE_ERROR_NOT_IMPLEMENTED, as it provides to a TA a possibility
to handle this error code [1].
>From GPD TEE Internal Core specification [2]:
TEE_ERROR_STORAGE_NOT_AVAILABLE - if the persistent object is stored in a
storage area which is currently inaccessible. It may be associated with
the device but unplugged, busy, or inaccessible for some other reason.
[1]: https://github.com/OP-TEE/optee_os/blob/
94db01ef448d1e552161c2d861d57a5f8bda0cc0/lib/libutee/tee_api_objects.c#L419
[2]: https://globalplatform.org/wp-content/uploads/2018/06/GPD_TEE_Internal_Core_API_Specification_v1.1.2.50_PublicReview.pdf
Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tom Rini [Fri, 14 Dec 2018 19:18:47 +0000 (14:18 -0500)]
Merge tag 'dm-pull-14dec18' of git://git.denx.de/u-boot-dm
Complete conversion of sound to driver model
Stefan Mavrodiev [Wed, 5 Dec 2018 12:49:44 +0000 (14:49 +0200)]
usb: musb-new: sunxi: Fix null pointer access
When the device is in peripheral mode there is no
struct usb_bus_priv allocated pointer, as the uclass driver
("usb_dev_generic") doesn't call per_device_auto_alloc_size.
This results in writing to the internal SDRAM at
priv->desc_before_addr = true;
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Siva Durga Prasad Paladugu [Thu, 13 Dec 2018 09:46:36 +0000 (15:16 +0530)]
usb: composite: Fix max packet size for USB3.0
For USB3.0, the max packetsize for GET_DESCRIPTOR should be
sent as exponent value for 2. This means for 512, max packet
size should be filled with 9(2^9=512). Also, fill the USB
version field with 3.0 if speed is negotiated to Superspeed.
This fixes the issue of DFU gadget download failure with
superspeed. Without this patch, the max packet size is
overflowed to zero as the bMaxPacketsize is of u8 and hence
host is not able to detect this device.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:31:00 +0000 (11:31 +0100)]
configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl
Enable DM_USB and DM_USB_GADGET for this platform. Also enable RNDIS boot
support (SPL load u-boot over USB RNDIS).
This is an example of how to use DM_USB on a am335x-based board.
A subsequent series will take this a step further and modify more
defconfigs.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:59 +0000 (11:30 +0100)]
configs: am335x_evm: Do not disable DM_USB in SPL
DM_USB is now supported in the SPL. Do not undef it
Besides to support DM_USB in SPL, one now has to use SPL_DM_USB
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:58 +0000 (11:30 +0100)]
arm: am33xx: Register USB controllers if DM_USB is used but not OF_CONTROL
When DM_USB is used, either the USB controllers are bound when the DTB
is parsed (when OF_CONTROL is enabled) or they are bound using the
U_BOOT_DEVICES() macro.
In the later case, the platform data is passed in a struct ti_musb_platdata
because it cannot be read from the DTB.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:57 +0000 (11:30 +0100)]
usb: musb-new: Add support for DM_USB
Enable DM for USB peripheral in the musb-new driver.
Also make sure that the driver can be used in the SPL.
This implies that:
* the driver must work with and without the OF_CONTROL option. That
in turn, implies that the platform data can be passed in a struct
ti_musb_platdata or be read from the dtb
* usb.o is linked in the SPL if host support is enabled
Another change is that the driver does not fail to bind (and stop the boot
process) if one of the child driver does not bind. Reporting the error is
enough. This kind of error would appear if the port is configured in the
DTS but the driver is not activated in the config.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:56 +0000 (11:30 +0100)]
usb: musb-new: Allow the diver not to use the set_phy_power() callback
The set_phy_power() callback is part of struct omap_musb_board_data. This
structure is part of the platform data passed to the musb-new driver. This
does not really fit with the Driver Model, so allow not to use struct
omap_musb_board_data to turn the phy on or off.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:55 +0000 (11:30 +0100)]
configs: am43xx: Enable RNDIS support in SPL
The AM43xx SOCs have the ability to download the SPl through USB (RNDIS).
Adding support for RNDIS in SPL allows to also download u-boot through USB.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:54 +0000 (11:30 +0100)]
configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
Enable DM_USB and DM_USB_GADGET for AM43xx EVM boards.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:53 +0000 (11:30 +0100)]
dts: am4372: Enable USB1 in SPL
USB1 can be used by the romboot on all am4372 platforms to download a
firmware (SPL in our case).
It makes sense to enable USB1 in the SPL to download u-boot.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:52 +0000 (11:30 +0100)]
dts: Add a u-boot specific dtsi file for the am4372
This file is used to override the values found in am4372.dtsi
Use it to fix the "compatible" options for the controllers used
to support the USB (parent bus and syscons).
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:51 +0000 (11:30 +0100)]
board: ti: am43xx: turn on USB clocks
Enable USB clocks in late init stage to support ports under DM_USB.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:50 +0000 (11:30 +0100)]
dwc3-generic: Add support for the am437x
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:49 +0000 (11:30 +0100)]
phy: omap_usb2: Add support for am437x
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:48 +0000 (11:30 +0100)]
spl: net: dm: usb: bind the gadget before attempting to load the image
If DM_USB_GADGET is used, the usb ethernet gadget driver must be bound to a
controller before the image can be downloaded over the network.
In u-boot this can be done with the bind command. In SPL it must be done
programmatically.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:30:47 +0000 (11:30 +0100)]
spl: drivers: Link usb common library to SPL if USB gadget is enabled
Some drivers might need to access common USB functions such as
usb_get_maximum_speed() or usb_get_dr_mode().
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:13:01 +0000 (11:13 +0100)]
configs: k2g_evm: Enable DFU on K2G EVM
The K2G evm uses the generic DWC3 driver. DFU can thus be enabled.
Enabling DFU for easier firmware update.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:13:00 +0000 (11:13 +0100)]
usb: host: replace xhci-keystone driver by the generic dwc3 driver
The keystone platforms can use the generic DC3 driver. Removing the
keystone-spcecific xchi driver and add the configuration options to enable
the generic DWC3 driver on all K2 platforms.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:12:59 +0000 (11:12 +0100)]
PHY: Add phy driver for the keystone USB PHY
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:12:58 +0000 (11:12 +0100)]
ARM: dts: k2g-evm: enable USB0 and USB1
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:12:57 +0000 (11:12 +0100)]
board: ks2_evm: Enable the USB clocks if DM_USB is used
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jean-Jacques Hiblot [Tue, 4 Dec 2018 10:12:56 +0000 (11:12 +0100)]
usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adam Ford [Wed, 12 Dec 2018 14:17:41 +0000 (08:17 -0600)]
usb: musb: Remove legacy CONFIG_USB_DA8XX
There don't appear to be any boards enabling CONFIG_USB_DA8XX,
and there is a newer version of the MUSB driver, so let's remove
the legacy version of it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Adam Ford [Wed, 12 Dec 2018 14:17:22 +0000 (08:17 -0600)]
usb: musb: Remove Legacy CONFIG_USB_DAVINCI
This patch removes CONFIG_USB_DAVINCI. It's a legacy option
that isn't defined anywhere, and there is a newer MUSB driver.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Martyn Welch [Mon, 10 Dec 2018 11:05:16 +0000 (11:05 +0000)]
usb: Don't enable CONFIG_SPL_DM_USB for non-DM SPL
When CONFIG_SPL_DM_USB was added, it was added defaulted on without
protection to ensure it didn't get set for non-DM SPL builds.
This leads to unexpected and confusing failures when building a DM based
U-Boot but with a non-DM SPL, as the defconfig is unlikely to have
CONFIG_SPL_DM_USB actively disabled.
Tweak the Kconfig to not enable this setting unless CONFIG_SPL_DM is set.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Lukasz Majewski [Fri, 23 Nov 2018 16:36:19 +0000 (17:36 +0100)]
usb: composite: Move bitmap related operations to ./include/linux/bitmap.h
The BITMAP related operations can now be moved to ./include/linux/bitmap.h
file to mimic the Linux kernel directory tree.
This change also allows to remove the lin_gadget_compat.h header file
(which is a legacy code only for composite U-boot layer).
It was also possible to remove #includes from several USB gadget drivers.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
Petr Štetiar [Fri, 23 Nov 2018 13:37:52 +0000 (14:37 +0100)]
usb: gadget: f_sdp: Provide filesize env variable for downloaded images
Currently it's not possible to get filesize of downloaded images and
it's impossible to automate some tasks in scripts. So this patch adds
`filesize` environment variable with size (as hex number in bytes) of
the last successfully downloaded file via `sdp` command.
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
Simon Glass [Mon, 10 Dec 2018 17:37:51 +0000 (10:37 -0700)]
dm: sound: Use the correct number of channels for sound
At present the 'beep' sound generates a waveform for only one channel even
if two are being used. This means that the beep is twice the frequency it
should be. Correct this by making it a parameter.
The fix in a previous commit was correct for sandbox but not for other
boards.
Fixes:
03f11e87a8 ("sound: Correct data output in sound_create_square_wave()")
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:50 +0000 (10:37 -0700)]
dm: sandbox: Allow selection of sample rate and channels
At present these parameters are hard-coded in the sdl interface code.
Allow them to be specified by the driver instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:49 +0000 (10:37 -0700)]
dm: sound: max98095: Tidy up error codes
Return a valid error code instead of -1.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:48 +0000 (10:37 -0700)]
dm: sound: Fix license headers
Fix a few files whos license headers were not converted to SPDX.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:47 +0000 (10:37 -0700)]
dm: sound: Complete migration to driver model
All users of sound are converted to use driver model. Drop the old code
and the CONFIG_DM_SOUND option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:46 +0000 (10:37 -0700)]
dm: exynos: Drop CONFIG_DM_I2C_COMPAT
This option is not needed anymore for all exynos boards except arndale.
Update the config.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:45 +0000 (10:37 -0700)]
dm: sandbox: sound: Convert to use driver model
Update sandbox's device tree and config to use driver model for sound. Use
the double buffer for sound output so that we don't need to wait for the
sound to complete before returning.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:44 +0000 (10:37 -0700)]
dm: exynos: sound: Convert to use driver model
Update snow's device tree and config to use driver model for sound. Also
update the others as best we can.
Spring does not appear to have audio support in the kernel. The smdk5250
and smdk5420 boards use a wolfson codec which I cannot test with. So the
only boards that is tested and known to work are snow, pit and pi.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:43 +0000 (10:37 -0700)]
dm: sound: exynos: Add support for max98090
Add support for this new codec which is used by pit.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:42 +0000 (10:37 -0700)]
dm: sound: Move common code out of maxim98095
The register-access code is useful for any maxim codec. Move it out into
its own file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:41 +0000 (10:37 -0700)]
exynos: Add support for exynos5420 i2s pinmux
Allow setting the i2s pinmux correctly on exyno5420 so that i2c can be
used on that SoC. Also rename EXYNOS_AUDSS to something consistent with
other naming.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:40 +0000 (10:37 -0700)]
exynos: Add proid_is_exynos542x() for common 542x
Add a convenience function for any Exynos 542x chip.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:39 +0000 (10:37 -0700)]
dm: sound: Add conversion to driver model
Move the existing hardware drivers over to use driver model.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:38 +0000 (10:37 -0700)]
dm: sound: Start i2c IDs from 0
The current ID enums start from 1 but there does not seem to be any reason
that they cannot start with 0. Adjust the code to avoid the +1 in
codec_init().
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:37 +0000 (10:37 -0700)]
dm: core: Add a function to read into a unsigned int
The current dev_read...() functions use s32 and u32 which are convenient
for device tree but not so useful for normal code, which often wants to
use normal integers for values.
Add a helper which supports returning an unsigned int. Also add signed
versions of the unsigned readers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:36 +0000 (10:37 -0700)]
dm: sound: Create a uclass for sound
The sound driver pulls together the audio codec and i2s drivers in order
to actually make sounds. It supports setup() and play() methods. The
sound_find_codec_i2s() function allows locating the linked codec and i2s
devices. They can be referred to from uclass-private data.
Add a uclass and a test for sound.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:35 +0000 (10:37 -0700)]
dm: sandbox: Update sound to use two buffers
At present we use a single buffer for sound which means we cannot be
playing one sound while queueing up the next. This wouldn't matter except
that a long sound (more than a second) has to be created as a single
buffer, thus using a lot of memory. To better mimic what real sound
drivers do, add support for double buffering in sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:34 +0000 (10:37 -0700)]
dm: sound: Create a uclass for i2s
The i2s bus is commonly used with audio codecs. It provides a way to
stream digital data sychronously in both directions. U-Boot only supports
audio output, so this uclass is very simple, with a single tx_data()
method.
Add a uclass and a test for i2s.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:33 +0000 (10:37 -0700)]
dm: sound: Create a uclass for audio codecs
An audio codec provides a way to convert digital data to sound and vice
versa. Add a simple uclass which just supports setting the parameters for
the codec.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:32 +0000 (10:37 -0700)]
dm: sound: Rename samsung_i2s_priv to i2s_uc_priv
This structure contains information that is likely needed by any i2s
driver so it seems useful to attach it to the (forthcoming) i2c uclass.
For now, just rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:31 +0000 (10:37 -0700)]
dm: sound: Create an option to use driver model for sound
The U-Boot sound system provides basic support for beeping. At present it
does not use driver model, but it needs to be converted. Add an option to
enable driver model for sound. For now it is not connected to anything.
Future work will add drivers which use this option. It will then be
removed once everything is converted.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 10 Dec 2018 17:37:30 +0000 (10:37 -0700)]
dm: sound: exynos: Correct codec bus addresses
For snow the codec is at address 0x11 on the i2c bus, in 7-bit format.
The device tree and code are in 8-bit format (i.e. shifted left one bit).
Fix both. Fix pit in a similar way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:34 +0000 (04:37 -0700)]
dm: sound: Fix up header ordering
Tidy up the ordering of header files in the sounds files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:33 +0000 (04:37 -0700)]
dm: sound: wm8994: Drop wm8994_i2c_init()
This function has only one line in it. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:32 +0000 (04:37 -0700)]
dm: sound: max98095: Drop g_codec_info and g_max98095_info
These are only used in two functions so can be made local.
Also change the first argument of max98095_do_init() to suit.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:31 +0000 (04:37 -0700)]
dm: sound: wm8994: Drop g_codec_info and g_wm8994_info
These are only used in two functions so can be made local.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:30 +0000 (04:37 -0700)]
dm: sound: max98095: Drop global i2c-address variable
We can put this in the private structure and avoid a global.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:29 +0000 (04:37 -0700)]
dm: sound: wm8994: Drop global i2c-address variable
We can put this in the private structure and avoid a global.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:28 +0000 (04:37 -0700)]
dm: sound: max98095: Split out interface setup code
With driver model we want to do a minimal probe when the device is probed
and then set up the codec interface later when a sound is actully played.
Split this setup code out into its own function to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:27 +0000 (04:37 -0700)]
dm: sound: wm899c: Split out interface setup code
With driver model we want to do a minimal probe when the device is probed
and then set up the codec interface later when a sound is actully played.
Split this setup code out into its own function to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:26 +0000 (04:37 -0700)]
dm: sound: wm8994: Create a new common init function
With driver model we cannot pass in the global struct, but instead want
to pass in the driver-private data. Split some of the code out of
wm8994_init() to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:25 +0000 (04:37 -0700)]
dm: sound: max98095: Pass private data to internal functions
At present the driver-private data is global. To allow this code to be
used with driver model, change it to pass the data down to each function.
Use the name 'priv' consistently throughout.
Also rename max98095_update_bits() to max98095_bic_or() which is more
descriptive and shorter, thus breaking fewer lines with the parameter
addition.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:24 +0000 (04:37 -0700)]
dm: sound: wm8994: Pass private data to internal functions
At present the driver-private data is global. To allow this code to be
used with driver model, change it to pass the data down to each function.
Use the name 'priv' consistently throughout.
Also rename wm8994_update_bits() to wm8994_bic_or() which is more
descriptive and shorter, thus breaking fewer lines with the parameter
addition.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:23 +0000 (04:37 -0700)]
dm: sound: Drop codec_type
This field is not really used. It is always set to a known value. Drop it
to simplify the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:22 +0000 (04:37 -0700)]
dm: sound: samsung: Rename i2stx_info to samsung_i2s_priv
This struct is only used by the Samsung I2C driver and should move into
that driver. For now, rename it so it is clear that is driver-private
info.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:21 +0000 (04:37 -0700)]
dm: sound: Drop unused pre-device-tree code
CONFIG_OF_CONTROL is enabled for all boards that use sound, so remove the
dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:20 +0000 (04:37 -0700)]
dm: sound: Rename en_sound_codec to sound_codec
The en_ prefix is confusing and not needed. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:19 +0000 (04:37 -0700)]
dm: sound: samsung: Make local function static
Several functions are not exported from this file. Make them static so
this is clear.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:18 +0000 (04:37 -0700)]
snow: Expand U-Boot size
Now that we have EFI, etc. enabled, U-Boot is larger than it was. Expand
the region allocated for it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 3 Dec 2018 11:37:17 +0000 (04:37 -0700)]
sandbox: Increase the pre-relocation memory
This is close to full now, so increase it to avoid problems with adding
more devices.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 13 Dec 2018 14:36:55 +0000 (09:36 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Tom Rini [Thu, 13 Dec 2018 00:45:07 +0000 (19:45 -0500)]
Merge branch '2018-12-12-master-imports'
- Various small TI platform updates
- Two unit test fixes
- qemu-arm updates
Adam Ford [Mon, 10 Dec 2018 20:56:36 +0000 (14:56 -0600)]
am3517_evm: Use ttyS2 instead of ttyO2
The serial driver in the kernel moved from ttyOx to ttySx a while
ago. This patch updates the console parameter to align with the
kernel change.
Signed-off-by: Adam Ford <aford173@gmail.com>
Peng Fan [Sun, 9 Dec 2018 12:45:45 +0000 (12:45 +0000)]
firmware: psci: introduce SPL_ARM_PSCI_FW
Introduce a new macro SPL_ARM_PSCI_FW
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Heinrich Schuchardt [Sat, 8 Dec 2018 08:53:05 +0000 (09:53 +0100)]
test: overlay: NULL passed as fdt
The uts created in do_ut_overlay() is not the one used in
cmd_ut_category(). Currently all tests are therefore called with
uts->priv = NULL and fail.
Using a static variable is the easiest fix here.
Fixes:
e93232e15ec9 ("test: overlay: Use cmd_ut_category()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Adam Ford [Fri, 7 Dec 2018 23:28:03 +0000 (17:28 -0600)]
ARM: omap3logic: Remove legacy USB code in favor of DM_USB
With the defconfig options enabling DM_USB, the legacy code
can be removed.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Fri, 7 Dec 2018 20:38:33 +0000 (14:38 -0600)]
ARM: omap3_logic/omap35_logic: Move to DM_USB
The existing config is setup as a gadget but it doesn't use
DM_USB. This patch converts all boards to DM_USB, but as host.
As host, it is able to mount USB drives and browse them.
Signed-off-by: Adam Ford <aford173@gmail.com>
Felix Brack [Fri, 7 Dec 2018 14:01:55 +0000 (15:01 +0100)]
arm: am335x-pdu001: Move from embedded to separate DTB
There is no need for an embedded device tree for this board so let the
build process generate a separate u-boot.dtb file instead.
Signed-off-by: Felix Brack <fb@ltec.ch>
Sekhar Nori [Thu, 6 Dec 2018 10:10:08 +0000 (15:40 +0530)]
spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT
Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but
CONFIG_SPL_PCI_SUPPORT disabled, results in following linker
error:
lib/built-in.o: In function `fdtdec_get_pci_bar32':
lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32'
fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32'
This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c
while SPL build does not descend into drivers/pci directory in
drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled.
Fix this by applying appropriate #define guards in lib/fdtdec.c.
It looks like ns16550.c has the same problem, so fixed that too.
To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI
(enables use of CONFIG_IS_ENABLED() macro).
Suggested-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>