Matthew Waters [Tue, 10 Nov 2015 03:54:02 +0000 (14:54 +1100)]
glviewconvert: add support rectangle/external-oes textures
https://bugzilla.gnome.org/show_bug.cgi?id=757285
Alessandro Decina [Tue, 17 Nov 2015 04:18:28 +0000 (15:18 +1100)]
applemedia: vtdec: fix setting internal SKIP / DROP flags
Vineeth TM [Tue, 17 Nov 2015 00:08:52 +0000 (09:08 +0900)]
glimagesink: Fix structure memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=758205
Olivier Crête [Tue, 17 Nov 2015 02:52:07 +0000 (21:52 -0500)]
autoconvert: Add support for bufferlists
Alessandro Decina [Tue, 17 Nov 2015 00:21:27 +0000 (11:21 +1100)]
applemedia: vtdec: improve negotiation
Rework negotiation implementing GstVideoDecoder::negotiate. Make it possible to
switch texture sharing on and off at runtime. Useful to (eventually) turn
texture sharing on in pipelines where glimagesink is linked only after
decoding has already started (for example OWR).
Alessandro Decina [Tue, 17 Nov 2015 00:19:57 +0000 (11:19 +1100)]
applemedia: vtdec: improve handing of decode errors/frame drops
Improve decode error handling by avoiding calling into GstVideoDecoder from the
VT decode callback. This removes contention on the GST_VIDEO_DECODER_STREAM_LOCK
which used to make the decode callback slow enough for VT to start dropping lots
of frames once the first frame was dropped.
Alessandro Decina [Tue, 17 Nov 2015 00:22:15 +0000 (11:22 +1100)]
applemedia: vtdec: fix uninitialized variable warning
Tim-Philipp Müller [Sat, 14 Nov 2015 20:21:17 +0000 (20:21 +0000)]
adaptivedemux: remove now-defunct "num-lookback-fragments" property
This no longer does anything, and it was marked as CONSTRUCT_ONLY
which means someone would really have to go out of their way to
be able to set this, which would only be done in very custom
scenarios, if ever, and those will likely target a specific
version of GStreamer then, so probably not much point keeping
it deprecated for a while before removing it.
Olivier Crête [Fri, 13 Nov 2015 22:14:14 +0000 (17:14 -0500)]
autoconvert: Always give a valid reply to internal caps queries
Caps queries can always have a valid reply, either the filter or ANY.
If the caps are ANY, then accept-caps always returns TRUE.
Nicolas Huet [Thu, 12 Nov 2015 15:35:12 +0000 (16:35 +0100)]
mpegtsdemux: fix section_data leak
If packet->payload_unit_start_indicator is true and pointer 0, there is no
discontinuity check. Therefore there could be a previous section not complete
that need to be cleared.
https://bugzilla.gnome.org/show_bug.cgi?id=758010
Vineeth TM [Fri, 13 Nov 2015 01:41:58 +0000 (10:41 +0900)]
glsl: fix possible string overrun in gst_glsl_version_profile_from_string
given a NULL-terminated string, s.
s[i] = '\0';
i++;
does not guarentee that s[i] is NULL terminated and thus string operations
could read off the end of the array.
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Matthew Waters [Fri, 13 Nov 2015 05:50:22 +0000 (16:50 +1100)]
glshader: don't read invalid list pointers (use after free)
gst_gl_shader_detach_unlocked already removes the list entry so attempting to
use the element to iterate to the next stage could read invalid data.
Based on patch by Vineeth TM <vineeth.tm@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Vineeth TM [Fri, 13 Nov 2015 01:44:26 +0000 (10:44 +0900)]
tests:glsl: version_profile_s string leak
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Vineeth TM [Fri, 13 Nov 2015 01:56:10 +0000 (10:56 +0900)]
glsl: free str while returning error
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Vineeth TM [Fri, 13 Nov 2015 02:04:34 +0000 (11:04 +0900)]
tests:glupload: fix caps memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Luis de Bethencourt [Thu, 12 Nov 2015 12:21:54 +0000 (12:21 +0000)]
opusenc: avoid potential overflow expression
The result of the two expressions will be promoted to guint64 anyway,
perform all the arithmetic in 64 bits to avoid potential overflows.
CID 1338690, CID 1338691
Luis de Bethencourt [Thu, 12 Nov 2015 12:00:07 +0000 (12:00 +0000)]
tsdemux: remove memory leak
The values of channel_mapping are copied by gst_codec_utils_opus_create_caps ()
but it doesn't free or take ownership of the g_new0 allocated memory. This
needs to be freed before going out of scope.
CID 1338692
Luis de Bethencourt [Thu, 12 Nov 2015 11:42:36 +0000 (11:42 +0000)]
mpegtsmux: remove unnecessary buffer check
buf surely isn't NULL inside the block conditional to a buffer size bigger
than (G_MAXUINT16 - 3). Plus gst_buffer_unref() checks if the buffer is
NULL and does nothing if it is.
CID 1338693
Luis de Bethencourt [Thu, 12 Nov 2015 11:23:31 +0000 (11:23 +0000)]
opusparse: initialize sample rate to a default
sample_rate might be used uninitialized if !sink_caps is TRUE. Initialize
it to the default used in gst_codec_utils_opus_parse_caps () when there is
no rate defined in the caps.
CID 1338695
Vineeth TM [Thu, 12 Nov 2015 07:36:03 +0000 (16:36 +0900)]
glslstage: Fix vertex_sources memory leak
vertex_sources is being allocated but not freed resulting in leak
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Vineeth TM [Thu, 12 Nov 2015 07:26:00 +0000 (16:26 +0900)]
glcolorconvert: remove unnecessary free
version_str is already being freed. So no need to call again
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Vineeth TM [Thu, 12 Nov 2015 07:18:35 +0000 (16:18 +0900)]
glcolorconvert: Fix string leak
String got using gst_glsl_version_profile_to_string, is allocated
memory and should be freed
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Vineeth TM [Thu, 12 Nov 2015 07:02:45 +0000 (16:02 +0900)]
glcolorconvert: Fix frag_prog and frag_body memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Florin Apostol [Wed, 11 Nov 2015 16:51:23 +0000 (16:51 +0000)]
adaptivedemux: fixed handling errors emitted by uri handler
https://bugzilla.gnome.org/show_bug.cgi?id=757947
Nicolas Huet [Tue, 10 Nov 2015 15:32:37 +0000 (16:32 +0100)]
tsdemux: fix pending buffers leak when flushing
https://bugzilla.gnome.org/show_bug.cgi?id=757895
Etienne Peron [Wed, 10 Jun 2015 12:18:00 +0000 (14:18 +0200)]
tsdemux: Fix pad leak when the pad is never exposed
If tsdemux never receives data for a stream, the corresponding pad will never
be added and stream->active will remain FALSE. When the stream is removed, the
pad will not be unreffed and will be leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=757873
Sreerenj Balachandran [Mon, 9 Nov 2015 15:45:29 +0000 (17:45 +0200)]
ivfparse: Fix the wrong width & height parsing of vp9 bitstream
The current implementation for detecting the resolution changes
on key frames is based on vp8 bitstream alignment. Avoid this
width and height parsing for vp9 bitstream, which requires proper
frame header parsing inorder to detect the resolution change (Fixme).
https://bugzilla.gnome.org/show_bug.cgi?id=757825
Heinrich Fink [Wed, 11 Nov 2015 10:40:52 +0000 (11:40 +0100)]
vtenc: Set profile_level to NULL after release
Otherwise, gst_vtenc_negotiate_profile_and_level will double-release as
it checks for profile_level != NULL. This caused crashes when the
vtenc instance is stopped and then restarted.
https://bugzilla.gnome.org/show_bug.cgi?id=757935
Matthew Waters [Wed, 11 Nov 2015 12:39:35 +0000 (23:39 +1100)]
glcolorconvert: mangle gl_FragColor for GL3
Some drivers don't provide the compatibility definition and we need to provide
our own 'out vec4' variable to put the results of the fragment shader into.
https://bugzilla.gnome.org/show_bug.cgi?id=757938
Vineeth TM [Wed, 11 Nov 2015 07:06:25 +0000 (16:06 +0900)]
tests:glcolorconvert: Fix caps memory leak
Output caps being got from video info is not getting freed
https://bugzilla.gnome.org/show_bug.cgi?id=757929
Matthew Waters [Tue, 10 Nov 2015 06:58:58 +0000 (17:58 +1100)]
tsdemux: provide our own definition of log2()
The log2 function/macro doesn't exist when targetting android API < 18 (or MSVC
< 2013) whereas our current baseline is API 9.
Matthew Waters [Tue, 10 Nov 2015 02:52:30 +0000 (13:52 +1100)]
glviewconvert: remove set_format
We need the caps to be able to
1. check the caps features
2. get the requested texture-target on input/output
Matthew Waters [Tue, 10 Nov 2015 23:31:07 +0000 (10:31 +1100)]
glimagesink: fix a memory leak if the view conversion fails
Matthew Waters [Wed, 11 Nov 2015 02:37:59 +0000 (13:37 +1100)]
glimagesink: balance the creation/destruction of the overlay compositor
Fixes some leaks/possible segfault on when failing to create the compositor.
Matthew Waters [Wed, 11 Nov 2015 01:23:30 +0000 (12:23 +1100)]
glshader: properly unref the stages on failure
When failing in the varargs functions, all the stage objects not handled need to
be unreffed to prevent a leak.
Matthew Waters [Wed, 11 Nov 2015 00:29:35 +0000 (11:29 +1100)]
glslstage: properly return an error when we could not create the shader stage
While it was erroring out correctly later, there were GLib warnings about
setting a GError over the top of another GError.
Matthew Waters [Tue, 10 Nov 2015 14:05:20 +0000 (01:05 +1100)]
glshaderstrings: fixup the external-oes fragment shader
The wrong sampler type was used
s/sampler2DExternalOES/samplerExternalOES/
Matthew Waters [Tue, 10 Nov 2015 12:41:24 +0000 (23:41 +1100)]
glcolorconvert: try to keep the same texture-target if possible
Fixes issues attempting to passthrough external-oes textures
Matthew Waters [Tue, 10 Nov 2015 11:41:57 +0000 (22:41 +1100)]
glcolorconvert: fix rendering rectangular textures with GL3
Rectangular textures are unavailable in unextended
GLES2 #version 100 shaders.
Fixes
texture-target=rectangle ! glcolorconvert ! texture-target=2D
There's a couple of differences between GL3 and GLES2/GL
- varying -> in or out depending on the stage (vertex/fragment)
- attribute -> in
- filtered texture access is a single function, texture()
Matthew Waters [Tue, 10 Nov 2015 09:20:29 +0000 (20:20 +1100)]
glcolorconvert: properly use the other texture-target on fixation
Matthew Waters [Tue, 10 Nov 2015 09:15:56 +0000 (20:15 +1100)]
glslstage: add debug as to why _set_strings() failed
Matthew Waters [Tue, 10 Nov 2015 09:13:53 +0000 (20:13 +1100)]
glsl: fix check for glsl version against GL context inversion
Any GLSL version that was less than the provided GL version would fail
Vineeth TM [Tue, 10 Nov 2015 01:02:38 +0000 (10:02 +0900)]
adaptivedemux: Fix pad memory leak.
The static pads got from queue and uri_handler are not being freed
resulting in memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=757859
Matthew Waters [Tue, 10 Nov 2015 02:13:50 +0000 (13:13 +1100)]
gl: forward declare some enums
Specifically the GstGLTextureTarget enum
Matthew Waters [Tue, 10 Nov 2015 02:11:37 +0000 (13:11 +1100)]
glslstage: expose the default shader strings as public
Add some other simple strings for external-oes textures or transforming
the texture coordinates with a transformation matrix
Matthew Waters [Thu, 5 Nov 2015 16:05:31 +0000 (03:05 +1100)]
glcolorconvert: wait on the sync meta for input buffers
Matthew Waters [Wed, 4 Nov 2015 13:13:01 +0000 (00:13 +1100)]
glimagesink: wait on the provided sync meta provided to glimagesink
Matthew Waters [Sun, 8 Nov 2015 11:14:01 +0000 (22:14 +1100)]
glcolorconvert: use the correct oes target string in the template caps
Matthew Waters [Tue, 10 Nov 2015 01:32:39 +0000 (12:32 +1100)]
gtk: add the overlaycomposition feature to the template caps
There is a possibility that the _get_caps impl will be called with the
feature in the filter caps which when interecting with the template,
will return EMPTY and therefore fail negotiation.
https://bugzilla.gnome.org/show_bug.cgi?id=757854
Alessandro Decina [Tue, 10 Nov 2015 03:21:33 +0000 (14:21 +1100)]
applemedia: fix vtdec texture sharing on ios 9.1
Use gst_gl_sized_gl_format_from_gl_format_type to get the format passed to
CVOpenGLESTextureCacheCreateTextureFromImage. Before this change extracting the
second texture from the pixel buffer was failing on ios 9.1.
Thiago Santos [Fri, 6 Nov 2015 20:24:52 +0000 (17:24 -0300)]
templatematch: add a framerate to test caps
The pad template requires a framerate, so use it to prevent
caps negotiation failures.
Fixes the unit test
Tim-Philipp Müller [Fri, 6 Nov 2015 20:38:56 +0000 (20:38 +0000)]
tests: update .gitignore for new test binaries
Tim-Philipp Müller [Fri, 6 Nov 2015 19:26:21 +0000 (19:26 +0000)]
assrender: don't send flush events on seeks
It's for the upstream element driving the pipeline to
handle seeks and send flush events or not, filters
should not interfere here, otherwise downstream pads
could be flushing before upstream pads are flushing,
which can result in GST_FLOW_ERROR being sent instead
of GST_FLOW_FLUSHING when trying to forward sticky
events at just the wrong moment.
Edward Hervey [Fri, 6 Nov 2015 15:16:32 +0000 (16:16 +0100)]
dvbsuboverlay: Don't send flush events
It is up to the element handling the seek to send flush events
downstream, otherwise we end up with a situation where upstream
would get unexpected GST_FLOW_FLUSHING
Tim-Philipp Müller [Fri, 6 Nov 2015 19:23:09 +0000 (19:23 +0000)]
Fix code indentation
Branko Subasic [Thu, 22 Oct 2015 11:40:36 +0000 (13:40 +0200)]
rtponviftimestamp: use stream time for timestamp
The Onvif Streaming Specification specifies that the NTP timestamps
in the Onvif extension header indicaes the absolute UTC time associated
with the access unit. But by using running time we can not achieve that,
since a frame's running time depends on the played interval, whether a
non-flushing is done, etc. Instead we have to use the stream time.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
Linus Svensson [Fri, 6 Nov 2015 08:44:57 +0000 (09:44 +0100)]
rtponviftimestamp: Update ntp-offset and d/e-bits with a GstEvent
It is now possible to update the currently used ntp-offset with a
custom serialized downstream event. The element will read the ntp-offset
property when doing the state transition from READY to PAUSED and
use that offset until it receives a "GstNtpOffset" event, which also
has a "ntp-offset" attribute in that it's structure. In case the
property is not set and no event has been received, the element will
guess the npt-offset with help of the clock. If no clock can be
retrieved, the element will error out and stop the data flow.
The same event is also used for updating the D/E-bits in the RTP
extension header. The discont flag in a buffer can be set whenver a
live/network source looses a frame, but that is not the type of
discontinuity that the onvif extension header should reflect. The
header is mainly used for playback of a track concept, in which
gaps can be present, and it's those kind of gaps that should be
highlighted with the D- and E-bits.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
Linus Svensson [Fri, 6 Nov 2015 08:44:16 +0000 (09:44 +0100)]
rtponviftimestamp: Do not rearange order of data
If a buffer or a buffer list is cached, no events serialized with the
data stream should get through. The cached buffers and events should
be purged when we stop flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
Branko Subasic [Tue, 13 Oct 2015 12:21:47 +0000 (14:21 +0200)]
rtponvif: split unit tests in several files
Split the unit tests for rtponviftimestamp and rtponvifparse
elements in separate files.
Setup and cleanup the element and pads in fixures. Make the tests work
with CK_FORK=no as well, by cleaning up the 'buffers' list when needed.
Make unit tests work when run in valgrind by unreffing all buffers,
and by not allocating any payload in RTP buffers. Since we're not
doing anything with the payload part, but we're memcmp-aring the
complete buffer memory, valgrind complained about non-initialized
memory being used.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
Philippe Normand [Fri, 4 Sep 2015 07:59:06 +0000 (09:59 +0200)]
adaptivedemux: improved bitrate estimations
Bitrate estimation is now handled through a queue2 element added after
the source element used to download fragments.
Original hlsdemux patch by Duncan Palmer <dpalmer@digisoft.tv>
https://bugzilla.gnome.org/show_bug.cgi?id=733959
Tim-Philipp Müller [Fri, 6 Nov 2015 12:59:51 +0000 (12:59 +0000)]
dshow: fix GList leak
_remove_link() would not free the actual list nodes.
Tim-Philipp Müller [Fri, 6 Nov 2015 12:31:09 +0000 (12:31 +0000)]
glshader, tsdemux: simplify code
Jus use _delete_link() instead of _remove_link() + _free1()
Tim-Philipp Müller [Fri, 6 Nov 2015 12:30:12 +0000 (12:30 +0000)]
glmixerbin: fix minor leak
Don't leak removed list node.
Thibault Saunier [Fri, 6 Nov 2015 09:22:42 +0000 (10:22 +0100)]
faac: Initialize debug category soon enough
Avoiding assertions
Julian Bouzas [Thu, 5 Nov 2015 10:12:41 +0000 (10:12 +0000)]
configure.ac: Added --with-hls-crypto=auto|nettle|libgcrypt|openssl option to build the source using the desired cryptographic library for HLS
https://bugzilla.gnome.org/show_bug.cgi?id=755319
Tim-Philipp Müller [Fri, 6 Nov 2015 00:48:42 +0000 (00:48 +0000)]
hls: m3u8: don't leak GList nodes when matching up variant lists after master list update
Luis de Bethencourt [Thu, 5 Nov 2015 12:36:48 +0000 (12:36 +0000)]
aggregator: use GST_STIME_FORMAT for GstClockTimeDiff
No need to manually handle negative value of deadline, GST_STIME_FORMAT does
exactly this.
Luis de Bethencourt [Thu, 5 Nov 2015 12:17:00 +0000 (12:17 +0000)]
resindvd: use GST_STIME_FORMAT for GstClockTimeDiff
No need to use G_GINT64_FORMAT for potentially negative values of
GstClockTimeDiff. Since 1.6 these can be handled with GST_STIME_FORMAT.
Plus it creates more readable values in the logs.
https://bugzilla.gnome.org/show_bug.cgi?id=757480
Sebastian Dröge [Thu, 5 Nov 2015 11:11:19 +0000 (12:11 +0100)]
opusdec: Update sink pad templates
We always require the channel-mapping-field. If it's 0 we require nothing
else, otherwise we need channels, stream-count and coupled count to be
available.
Stefan Sauer [Wed, 4 Nov 2015 03:09:33 +0000 (19:09 -0800)]
aggregator: don't compare templ instance pointers
One can pass the PadTemplate from the element_class or the one from the factory.
While they have the same content, the addresses are different.
Sebastian Dröge [Tue, 3 Nov 2015 22:12:52 +0000 (00:12 +0200)]
opus: Remove invalid unit test
Opus headers should never be in-band, so don't test for correct
handling of that.
Sebastian Dröge [Tue, 3 Nov 2015 22:12:22 +0000 (00:12 +0200)]
opusenc: Create an empty taglist if there is none
There always have to be 2 buffers in the streamheaders, even if
the comment buffer is basically empty.
Olivier Crête [Tue, 3 Nov 2015 19:41:57 +0000 (14:41 -0500)]
aggregator: Set to running in a single place
Only set to running when the thread is actually started.
Olivier Crête [Tue, 3 Nov 2015 19:37:26 +0000 (14:37 -0500)]
aggregator: Document more locking
Sebastian Dröge [Tue, 3 Nov 2015 17:53:00 +0000 (19:53 +0200)]
tsdemux: Don't create an incomplete OpusHead but set all the other caps fields instead
OpusHead is optional, the other fields are not.
https://bugzilla.gnome.org/show_bug.cgi?id=757152
Sebastian Dröge [Tue, 3 Nov 2015 17:51:03 +0000 (19:51 +0200)]
tsmux: Simplify Opus caps parsing by using codecutils helpers
https://bugzilla.gnome.org/show_bug.cgi?id=757152
Sebastian Dröge [Tue, 3 Nov 2015 12:50:53 +0000 (14:50 +0200)]
opus: Add proper support for multichannel audio
https://bugzilla.gnome.org/show_bug.cgi?id=757152
Sebastian Dröge [Tue, 3 Nov 2015 09:41:07 +0000 (11:41 +0200)]
opusparse: Fix up pre-skip in OpusHead if upstream using GstAudioClippingMeta
Makes transmuxing from e.g. MPEG-TS to Ogg sample accurate.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Mon, 2 Nov 2015 16:02:55 +0000 (18:02 +0200)]
tsdemux/mux: Add support for GstAudioClippingMeta for Opus
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Mon, 2 Nov 2015 15:33:53 +0000 (17:33 +0200)]
opusdec: Handle GstAudioClippingMeta instead of the pre-skip field in the OpusHead
oggdemux is outputting the meta now, and only outputs if it should really
apply to the current buffer. Previously we would skip N samples also if we
started the decoder in the middle of the stream.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Mon, 2 Nov 2015 14:52:28 +0000 (16:52 +0200)]
opusenc: Add GstAudioClippingMeta to buffers that need to be clipped
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Mon, 2 Nov 2015 08:30:52 +0000 (10:30 +0200)]
opusenc: Disable granule position calculations by the base class
It is doing the wrong thing because of the Opus pre-skip: while the timestamps
are shifted by the pre-skip, the granule positions are not shifted.
oggmux is doing the right thing here already.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Sat, 31 Oct 2015 13:02:50 +0000 (15:02 +0200)]
opusenc: Add some FIXME comments about calculating padding with LPC
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Fri, 30 Oct 2015 18:57:37 +0000 (20:57 +0200)]
opusenc: Encode exactly the amount of samples we got as input and put correct timestamps on it
The first frame has lookahead less samples, the last frame might have some
padding or we might have to encode another frame of silence to get all our
input into the encoded data.
This is because of a) the lookahead at the beginning of the encoding, which
shifts all data by that amount of samples and b) the padding needed to fill
the very last frame completely.
Ideally we would use LPC to calculate something better than silence for the
padding to make the encoding as smooth as possible.
With this we get exactly the same amount of samples again in an
opusenc ! opusdec pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Fri, 30 Oct 2015 18:47:20 +0000 (20:47 +0200)]
opusenc: Put lookahead/pre-skip into the OpusHead header
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Sebastian Dröge [Sun, 25 Oct 2015 15:27:39 +0000 (17:27 +0200)]
tsmux: Add support for Opus
https://bugzilla.gnome.org/show_bug.cgi?id=757049
Sebastian Dröge [Sat, 24 Oct 2015 11:27:43 +0000 (14:27 +0300)]
tsdemux: Add support for Opus
Code partially based on
https://git.videolan.org/?p=ffmpeg.git;a=commit;h=
74141f693ded2fbf75af56fff309d2db35183635
and based on the spec draft at
https://wiki.xiph.org/OpusTS
Makes it possible to demux
http://www.obe.tv/Downloads/opus.ts
https://bugzilla.gnome.org/show_bug.cgi?id=757049
Sebastian Dröge [Sun, 25 Oct 2015 17:31:51 +0000 (19:31 +0200)]
tsmux: Don't leak buffer in error cases
https://bugzilla.gnome.org/show_bug.cgi?id=757049
Sebastian Dröge [Sun, 25 Oct 2015 17:29:53 +0000 (19:29 +0200)]
tsmux: Call prepare function for each collected buffer
Not when clipping buffers, as that doesn't happen for every buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=757049
Sebastian Dröge [Sun, 25 Oct 2015 16:09:24 +0000 (18:09 +0200)]
mpegtsdescriptor: Add API for creating extended descriptors and fix writing them
https://bugzilla.gnome.org/show_bug.cgi?id=757049
Stefan Sauer [Tue, 3 Nov 2015 05:16:15 +0000 (21:16 -0800)]
opencv: cast paramspec flags to fix the build for c++
All the other elements in this plugin do this already.
Luis de Bethencourt [Tue, 3 Nov 2015 15:05:20 +0000 (15:05 +0000)]
dvbsrc: use GST_STIME_ARGS for GstClockTimeDiff
No need to use G_GINT64_FORMAT for potentially negative values of
GstClockTimeDiff. Since 1.6 these can be handled with GST_STIME_ARGS.
Plus it creates more readable values in the logs.
https://bugzilla.gnome.org/show_bug.cgi?id=757480
Luis de Bethencourt [Tue, 3 Nov 2015 15:00:01 +0000 (15:00 +0000)]
amcvideodec: use GST_STIME_ARGS for GstClockTimeDiff
No need to manually handle negative value of deadline, GST_STIME_ARGS does
exactly this.
Hyunil Park [Tue, 3 Nov 2015 10:42:40 +0000 (10:42 +0000)]
waylandsink: Add exception code for setting wl_surface
Waylandsink needs exception code in gst_wayland_sink_set_window_handle().
After making sink->window, User can call
gst_wayland_sink_set_window_handle(). It is the user's fault, but
Waylandsink needs to handle the exception, if not then sink->window is
changed and rendering fails.
https://bugzilla.gnome.org/show_bug.cgi?id=747482
Hyunil Park [Thu, 9 Apr 2015 04:17:01 +0000 (13:17 +0900)]
waylandsink: Add exception code for setting wl_display
Waylandsink needs exception code in gst_wayland_sink_set_context(). After
calling gst_wayland_sink_set_context(), below code is set.
GST_ELEMENT_CLASS (parent_class)->set_context (element, context); but, If
user can call onemore. It is user's fault. but waylandsink need to
exception.
https://bugzilla.gnome.org/show_bug.cgi?id=747482
Olivier Crête [Tue, 3 Nov 2015 01:10:35 +0000 (20:10 -0500)]
aggregator: Hold object lock while manipulating the segment
Make sure the object lock is held when aggregator->segment is
modified.
Olivier Crête [Tue, 3 Nov 2015 00:40:28 +0000 (19:40 -0500)]
audioaggregator: Improve log messages
Make the level of log messages saner and improve some.
Olivier Crête [Tue, 3 Nov 2015 00:05:01 +0000 (19:05 -0500)]
aggregator: Remove dead code
This code will never be called as max>=min in all cases. If the upstream
latency query returned min>max, the function already returned and all
values that are added to those have max>= min.
Luis de Bethencourt [Mon, 2 Nov 2015 17:02:47 +0000 (17:02 +0000)]
mpegtsmux: use GST_STIME_ARGS for GstClockTimeDiff
No need to manually handle negative values of best->dts in
GST_DEBUG_OBJECT. Use GST_STIME_ARGS for this.
Luis de Bethencourt [Mon, 2 Nov 2015 16:58:57 +0000 (16:58 +0000)]
videoaggregator: use GST_STIME_ARGS for GstClockTimeDiff
No need to manually handle negative values of diff, GST_STIME_ARGS does
exactly this.