Colin Ian King [Thu, 27 Jun 2019 13:09:04 +0000 (14:09 +0100)]
apparmor: fix unsigned len comparison with less than zero
[ Upstream commit
00e0590dbaec6f1bcaa36a85467d7e3497ced522 ]
The sanity check in macro update_for_len checks to see if len
is less than zero, however, len is a size_t so it can never be
less than zero, so this sanity check is a no-op. Fix this by
making len a ssize_t so the comparison will work and add ulen
that is a size_t copy of len so that the min() macro won't
throw warnings about comparing different types.
Addresses-Coverity: ("Macro compares unsigned to 0")
Fixes:
f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Fri, 15 Nov 2019 12:55:51 +0000 (14:55 +0200)]
gpio: mpc8xxx: Don't overwrite default irq_set_type callback
[ Upstream commit
4e50573f39229d5e9c985fa3b4923a8b29619ade ]
The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.
The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:
- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio
On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).
Fixes:
82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Wed, 13 Nov 2019 22:05:08 +0000 (14:05 -0800)]
scsi: target: iscsi: Wait for all commands to finish before freeing a session
[ Upstream commit
e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]
The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr
ffff8881154eca70 by task kworker/0:2/247
CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
dump_stack+0x8a/0xd6
print_address_description.constprop.0+0x40/0x60
__kasan_report.cold+0x1b/0x33
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
__lock_acquire+0xb1a/0x2710
lock_acquire+0xd3/0x200
_raw_spin_lock_irqsave+0x43/0x60
target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
target_put_sess_cmd+0x2e/0x40 [target_core_mod]
lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
target_complete_ok_work+0x1b0/0x790 [target_core_mod]
process_one_work+0x549/0xa40
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Allocated by task 889:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xf6/0x360
transport_alloc_session+0x29/0x80 [target_core_mod]
iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Freed by task 1025:
save_stack+0x23/0x90
__kasan_slab_free+0x13a/0x190
kasan_slab_free+0x12/0x20
kmem_cache_free+0x146/0x400
transport_free_session+0x179/0x2f0 [target_core_mod]
transport_deregister_session+0x130/0x180 [target_core_mod]
iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
The buggy address belongs to the object at
ffff8881154ec9c0
which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
352-byte region [
ffff8881154ec9c0,
ffff8881154ecb20)
The buggy address belongs to the page:
page:
ffffea0004553b00 refcount:1 mapcount:0 mapping:
ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw:
2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw:
0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>
ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anatol Pomazau [Sat, 16 Nov 2019 00:47:35 +0000 (19:47 -0500)]
scsi: iscsi: Don't send data to unbound connection
[ Upstream commit
238191d65d7217982d69e21c1d623616da34b281 ]
If a faulty initiator fails to bind the socket to the iSCSI connection
before emitting a command, for instance, a subsequent send_pdu, it will
crash the kernel due to a null pointer dereference in sock_sendmsg(), as
shown in the log below. This patch makes sure the bind succeeded before
trying to use the socket.
BUG: kernel NULL pointer dereference, address:
0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker
[ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20
[...]
[ 24.161739] RSP: 0018:
ffffab6440043ca0 EFLAGS:
00010282
[ 24.162400] RAX:
ffffffff891c1c00 RBX:
ffffffff89d53968 RCX:
0000000000000001
[ 24.163253] RDX:
0000000000000030 RSI:
ffffab6440043d00 RDI:
0000000000000000
[ 24.164104] RBP:
0000000000000030 R08:
0000000000000030 R09:
0000000000000030
[ 24.165166] R10:
ffffffff893e66a0 R11:
0000000000000018 R12:
ffffab6440043d00
[ 24.166038] R13:
0000000000000000 R14:
0000000000000000 R15:
ffff9d5575a62e90
[ 24.166919] FS:
0000000000000000(0000) GS:
ffff9d557db80000(0000) knlGS:
0000000000000000
[ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 24.168587] CR2:
0000000000000018 CR3:
000000007a838000 CR4:
00000000000006e0
[ 24.169451] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 24.170320] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 24.171214] Call Trace:
[ 24.171537] security_socket_sendmsg+0x3a/0x50
[ 24.172079] sock_sendmsg+0x16/0x60
[ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120
[ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170
[ 24.173604] ? iscsi_dbg_trace+0x63/0x80
[ 24.174087] iscsi_tcp_task_xmit+0x101/0x280
[ 24.174666] iscsi_xmit_task+0x83/0x110
[ 24.175206] iscsi_xmitworker+0x57/0x380
[ 24.175757] ? __schedule+0x2a2/0x700
[ 24.176273] process_one_work+0x1b5/0x360
[ 24.176837] worker_thread+0x50/0x3c0
[ 24.177353] kthread+0xf9/0x130
[ 24.177799] ? process_one_work+0x360/0x360
[ 24.178401] ? kthread_park+0x90/0x90
[ 24.178915] ret_from_fork+0x35/0x40
[ 24.179421] Modules linked in:
[ 24.179856] CR2:
0000000000000018
[ 24.180327] ---[ end trace
b4b7674b6df5f480 ]---
Signed-off-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Co-developed-by: Bharath Ravi <rbharath@google.com>
Signed-off-by: Bharath Ravi <rbharath@google.com>
Co-developed-by: Khazhimsel Kumykov <khazhy@google.com>
Signed-off-by: Khazhimsel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Finn Thain [Sat, 16 Nov 2019 03:36:57 +0000 (14:36 +1100)]
scsi: NCR5380: Add disconnect_mask module parameter
[ Upstream commit
0b7a223552d455bcfba6fb9cfc5eef2b5fce1491 ]
Add a module parameter to inhibit disconnect/reselect for individual
targets. This gains compatibility with Aztec PowerMonster SCSI/SATA
adapters with buggy firmware. (No fix is available from the vendor.)
Apparently these adapters pass-through the product/vendor of the attached
SATA device. Since they can't be identified from the response to an INQUIRY
command, a device blacklist flag won't work.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.au
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maurizio Lombardi [Fri, 15 Nov 2019 16:37:27 +0000 (17:37 +0100)]
scsi: scsi_debug: num_tgts must be >= 0
[ Upstream commit
aa5334c4f3014940f11bf876e919c956abef4089 ]
Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory
Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subhash Jadavani [Fri, 15 Nov 2019 06:09:30 +0000 (22:09 -0800)]
scsi: ufs: Fix error handing during hibern8 enter
[ Upstream commit
6d303e4b19d694cdbebf76bcdb51ada664ee953d ]
During clock gating (ufshcd_gate_work()), we first put the link hibern8 by
calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter()
returns success (0) then we gate all the clocks. Now let’s zoom in to what
ufshcd_uic_hibern8_enter() does internally: It calls
__ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery
shall put the link back to the highest HS gear and returns success (0) to
ufshcd_uic_hibern8_enter() which is the issue as link is still in active
state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to
ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while
link is still in active state hence I believe controller would raise UIC
error interrupts. But when we service the interrupt, clocks might have
already been disabled!
This change fixes for this by returning failure from
__ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in
hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate
retry to put the link state back into hibern8.
Link: https://lore.kernel.org/r/1573798172-20534-8-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
peter chang [Thu, 14 Nov 2019 10:08:58 +0000 (15:38 +0530)]
scsi: pm80xx: Fix for SATA device discovery
[ Upstream commit
ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]
Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.
Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kevin Hao [Tue, 8 Oct 2019 11:29:34 +0000 (19:29 +0800)]
watchdog: Fix the race between the release of watchdog_core_data and cdev
[ Upstream commit
72139dfa2464e43957d330266994740bb7be2535 ]
The struct cdev is embedded in the struct watchdog_core_data. In the
current code, we manage the watchdog_core_data with a kref, but the
cdev is manged by a kobject. There is no any relationship between
this kref and kobject. So it is possible that the watchdog_core_data is
freed before the cdev is entirely released. We can easily get the
following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and
CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0
Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-
20190924-yoctodev-standard+ #180
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate:
00400009 (nzcv daif +PAN -UAO)
pc : debug_print_object+0xb0/0xf0
lr : debug_print_object+0xb0/0xf0
sp :
ffff80001cbcfc70
x29:
ffff80001cbcfc70 x28:
ffff800010ea2128
x27:
ffff800010bad000 x26:
0000000000000000
x25:
ffff80001103c640 x24:
ffff80001107b268
x23:
ffff800010bad9e8 x22:
ffff800010ea2128
x21:
ffff000bc2c62af8 x20:
ffff80001103c600
x19:
ffff800010e867d8 x18:
0000000000000060
x17:
0000000000000000 x16:
0000000000000000
x15:
ffff000bd7240470 x14:
6e6968207473696c
x13:
5f72656d6974203a x12:
6570797420746365
x11:
6a626f2029302065 x10:
7461747320657669
x9 :
7463612820657669 x8 :
3378302f3078302b
x7 :
0000000000001d7a x6 :
ffff800010fd5889
x5 :
0000000000000000 x4 :
0000000000000000
x3 :
0000000000000000 x2 :
ffff000bff948548
x1 :
276a1c9e1edc2300 x0 :
0000000000000000
Call trace:
debug_print_object+0xb0/0xf0
debug_check_no_obj_freed+0x1e8/0x210
kfree+0x1b8/0x368
watchdog_cdev_unregister+0x88/0xc8
watchdog_dev_unregister+0x38/0x48
watchdog_unregister_device+0xa8/0x100
softdog_exit+0x18/0xfec4 [softdog]
__arm64_sys_delete_module+0x174/0x200
el0_svc_handler+0xd0/0x1c8
el0_svc+0x8/0xc
This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit
233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the
watchdog_core_data, and use the API provided by the commit
233ed09d7fda
to make sure that the release of watchdog_core_data and cdev are
in sequence.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Duggan [Wed, 23 Oct 2019 01:24:03 +0000 (01:24 +0000)]
HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
[ Upstream commit
8725aa4fa7ded30211ebd28bb1c9bae806eb3841 ]
In the event that the RMI device is unreachable, the calls to rmi_set_mode() or
rmi_set_page() will fail before registering the RMI transport device. When the
device is removed, rmi_remove() will call rmi_unregister_transport_device()
which will attempt to access the rmi_dev pointer which was not set.
This patch adds a check of the RMI_STARTED bit before calling
rmi_unregister_transport_device(). The RMI_STARTED bit is only set
after rmi_register_transport_device() completes successfully.
The kernel oops was reported in this message:
https://www.spinics.net/lists/linux-input/msg58433.html
[jkosina@suse.cz: reworded changelog as agreed with Andrew]
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Federico Cerutti <federico@ceres-c.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Blaž Hrastnik [Wed, 6 Nov 2019 11:02:46 +0000 (20:02 +0900)]
HID: Improve Windows Precision Touchpad detection.
[ Upstream commit
2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]
Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing
data used to verify the touchpad as a Windows Precision Touchpad.
0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA)
0x09, 0xC5, // USAGE (Vendor Usage 0xC5)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff)
0x75, 0x08, // REPORT_SIZE (8)
0x96, 0x00, 0x01, // REPORT_COUNT (0x100 (256))
0xb1, 0x02, // FEATURE (Data,Var,Abs)
However, some devices, namely Microsoft's Surface line of products
instead implement a "segmented device certification report" (usage 0xC6)
which returns the same report, but in smaller chunks.
0x06, 0x00, 0xff, // USAGE_PAGE (Vendor Defined)
0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA)
0x09, 0xC6, // USAGE (Vendor usage for segment #)
0x25, 0x08, // LOGICAL_MAXIMUM (8)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x01, // REPORT_COUNT (1)
0xb1, 0x02, // FEATURE (Data,Var,Abs)
0x09, 0xC7, // USAGE (Vendor Usage)
0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff)
0x95, 0x20, // REPORT_COUNT (32)
0xb1, 0x02, // FEATURE (Data,Var,Abs)
By expanding Win8 touchpad detection to also look for the segmented
report, all Surface touchpads are now properly recognized by
hid-multitouch.
Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Thu, 31 Oct 2019 14:05:19 +0000 (10:05 -0400)]
libnvdimm/btt: fix variable 'rc' set but not used
[ Upstream commit
4e24e37d5313edca8b4ab86f240c046c731e28d6 ]
drivers/nvdimm/btt.c: In function 'btt_read_pg':
drivers/nvdimm/btt.c:1264:8: warning: variable 'rc' set but not used
[-Wunused-but-set-variable]
int rc;
^~
Add a ratelimited message in case a storm of errors is encountered.
Fixes:
d9b83c756953 ("libnvdimm, btt: rework error clearing")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/1572530719-32161-1-git-send-email-cai@lca.pw
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Mon, 11 Nov 2019 03:32:04 +0000 (04:32 +0100)]
ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening
[ Upstream commit
4ae5061a19b550dfe25397843427ed2ebab16b16 ]
When the default processor handling was added to the function
cpu_v7_spectre_init() it only excluded other ARM implemented processor
cores. The Broadcom Brahma B53 core is not implemented by ARM so it
ended up falling through into the set of processors that attempt to use
the ARM_SMCCC_ARCH_WORKAROUND_1 service to harden the branch predictor.
Since this workaround is not necessary for the Brahma-B53 this commit
explicitly checks for it and prevents it from applying a branch
predictor hardening workaround.
Fixes:
10115105cb3a ("ARM: spectre-v2: add firmware based hardening")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 14 Nov 2019 14:30:46 +0000 (15:30 +0100)]
HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
[ Upstream commit
61005d65b6c7dcf61c19516e6ebe5acc02d2cdda ]
My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing
intermittent errors like these in the log:
[11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
errors in other places, lets do the same in
hidpp20_batterylevel_get_battery_capacity to remove these harmless,
but scary looking errors from the dmesg output.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jinke Fan [Wed, 13 Nov 2019 03:38:41 +0000 (11:38 +0800)]
HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
[ Upstream commit
f1a0094cbbe97a5f8aca7bdc64bfe43ac9dc6879 ]
The PixArt OEM mouse disconnets/reconnects every minute on
Linux. All contents of dmesg are repetitive:
[ 1465.810014] usb 1-2.2: USB disconnect, device number 20
[ 1467.431509] usb 1-2.2: new low-speed USB device number 21 using xhci_hcd
[ 1467.654982] usb 1-2.2: New USB device found, idVendor=03f0,idProduct=1f4a, bcdDevice= 1.00
[ 1467.654985] usb 1-2.2: New USB device strings: Mfr=1, Product=2,SerialNumber=0
[ 1467.654987] usb 1-2.2: Product: HP USB Optical Mouse
[ 1467.654988] usb 1-2.2: Manufacturer: PixArt
[ 1467.699722] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1F4A.0012/input/input19
[ 1467.700124] hid-generic 0003:03F0:1F4A.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:05:00.3-2.2/input0
So add HID_QUIRK_ALWAYS_POLL for this one as well.
Test the patch, the mouse is no longer disconnected and there are no
duplicate logs in dmesg.
Reference:
https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Wed, 13 Nov 2019 08:03:24 +0000 (16:03 +0800)]
bcache: at least try to shrink 1 node in bch_mca_scan()
[ Upstream commit
9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ]
In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;
nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.
If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.
This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Jarzmik [Sat, 26 Oct 2019 19:44:20 +0000 (21:44 +0200)]
clk: pxa: fix one of the pxa RTC clocks
[ Upstream commit
46acbcb4849b2ca2e6e975e7c8130c1d61c8fd0c ]
The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and
rtc-pxa drivers.
A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't
fixed. This patch completes the previous one.
Fixes:
8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Finn Thain [Sat, 2 Nov 2019 01:06:54 +0000 (12:06 +1100)]
scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
[ Upstream commit
79172ab20bfd8437b277254028efdb68484e2c21 ]
Since the scsi subsystem adopted the blk-mq API, a host with zero
sg_tablesize crashes with a NULL pointer dereference.
blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda]
10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops:
00000000
Modules linked in:
PC: [<
001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004 SP: (ptrval) a2:
00874520
d0:
00000000 d1:
00000000 d2:
009ba800 d3:
00000000
d4:
00000000 d5:
08000002 a0:
0087be68 a1:
009a81e0
Process kworker/u2:2 (pid: 15, task=(ptrval))
Frame format=7 eff addr=
0000007a ssw=0505 faddr=
0000007a
wb 1 stat/addr/data: 0000
00000000 00000000
wb 2 stat/addr/data: 0000
00000000 00000000
wb 3 stat/addr/data: 0000
0000007a 00000000
push data:
00000000 00000000 00000000 00000000
Stack from
0087bd98:
00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<
001c4f6c>] blk_put_request+0xe/0x14
[<
0024d200>] __scsi_execute+0x124/0x174
[<
0024d0dc>] __scsi_execute+0x0/0x174
[<
00265d10>] sd_revalidate_disk+0xba/0x1f02
[<
00265c56>] sd_revalidate_disk+0x0/0x1f02
[<
0036ddf4>] strlen+0x0/0x22
[<
00227ba0>] device_add+0x3da/0x604
[<
0036ddf4>] strlen+0x0/0x22
[<
00267e64>] sd_probe+0x30c/0x4b4
[<
0002da44>] process_one_work+0x0/0x402
[<
0022b978>] really_probe+0x226/0x354
[<
0022bc34>] driver_probe_device+0xa4/0xf0
[<
0002da44>] process_one_work+0x0/0x402
[<
0022bcd0>] __driver_attach_async_helper+0x50/0x70
[<
00035dae>] async_run_entry_fn+0x36/0x130
[<
0002db88>] process_one_work+0x144/0x402
[<
0002e1aa>] worker_thread+0x0/0x570
[<
0002e29a>] worker_thread+0xf0/0x570
[<
0002e1aa>] worker_thread+0x0/0x570
[<
003768d8>] schedule+0x0/0xb8
[<
0003f58c>] __init_waitqueue_head+0x0/0x12
[<
00033e92>] kthread+0xc2/0xf6
[<
000331e8>] kthread_parkme+0x0/0x4e
[<
003768d8>] schedule+0x0/0xb8
[<
00033dd0>] kthread+0x0/0xf6
[<
00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c
Disabling lock debugging due to kernel taint
Avoid this by setting sg_tablesize = 1.
Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au
Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
References: commit
68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo L. F. Walbon [Thu, 2 May 2019 21:09:07 +0000 (18:09 -0300)]
powerpc/security: Fix wrong message when RFI Flush is disable
[ Upstream commit
4e706af3cd8e1d0503c25332b30cad33c97ed442 ]
The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.
If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.
"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.
SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.
So the message should be as the truth table shows:
CPU | L1D private | RFI Flush | sysfs
----|-------------|-----------|-------------------------------------
P9 | False | False | Vulnerable
P9 | False | True | Mitigation: RFI Flush
P9 | True | False | Vulnerable: L1D private per thread
P9 | True | True | Mitigation: RFI Flush, L1D private per thread
P8 | False | False | Vulnerable
P8 | False | True | Mitigation: RFI Flush
Output before this fix:
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: RFI Flush, L1D private per thread
# echo 0 > /sys/kernel/debug/powerpc/rfi_flush
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: L1D private per thread
Output after fix:
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: RFI Flush, L1D private per thread
# echo 0 > /sys/kernel/debug/powerpc/rfi_flush
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Vulnerable: L1D private per thread
Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Mon, 11 Nov 2019 05:21:36 +0000 (23:21 -0600)]
PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-info
[ Upstream commit
4f9f2d3d7a434b7f882b72550194c9278f4a3925 ]
The newer ibm,drc-info property is a condensed description of the old
ibm,drc-* properties (ie. names, types, indexes, and power-domains).
When matching a drc-index to a drc-name we need to verify that the
index is within the start and last drc-index range and map it to a
drc-name using the drc-name-prefix and logical index.
Fix the mapping by checking that the index is within the range of the
current drc-info entry, and build the name from the drc-name-prefix
concatenated with the starting drc-name-suffix value and the sequential
index obtained by subtracting ibm,my-drc-index from this entries
drc-start-index.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-10-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Mon, 11 Nov 2019 05:21:35 +0000 (23:21 -0600)]
PCI: rpaphp: Annotate and correctly byte swap DRC properties
[ Upstream commit
0737686778c6dbe0908d684dd5b9c05b127526ba ]
The device tree is in big endian format and any properties directly
retrieved using OF helpers that don't explicitly byte swap should
be annotated. In particular there are several places where we grab
the opaque property value for the old ibm,drc-* properties and the
ibm,my-drc-index property.
Fix this for better static checking by annotating values we know to
explicitly big endian, and byte swap where appropriate.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-9-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Mon, 11 Nov 2019 05:21:32 +0000 (23:21 -0600)]
PCI: rpaphp: Don't rely on firmware feature to imply drc-info support
[ Upstream commit
52e2b0f16574afd082cff0f0e8567b2d9f68c033 ]
In the event that the partition is migrated to a platform with older
firmware that doesn't support the ibm,drc-info property the device
tree is modified to remove the ibm,drc-info property and replace it
with the older style ibm,drc-* properties for types, names, indexes,
and power-domains. One of the requirements of the drc-info firmware
feature is that the client is able to handle both the new property,
and old style properties at runtime. Therefore we can't rely on the
firmware feature alone to dictate which property is currently
present in the device tree.
Fix this short coming by checking explicitly for the ibm,drc-info
property, and falling back to the older ibm,drc-* properties if it
doesn't exist.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-6-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Hildenbrand [Thu, 31 Oct 2019 14:29:22 +0000 (15:29 +0100)]
powerpc/pseries/cmm: Implement release() function for sysfs device
[ Upstream commit
7d8212747435c534c8d564fbef4541a463c976ff ]
When unloading the module, one gets
------------[ cut here ]------------
Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
...
We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bean Huo [Tue, 12 Nov 2019 22:34:36 +0000 (23:34 +0100)]
scsi: ufs: fix potential bug which ends in system hang
[ Upstream commit
cfcbae3895b86c390ede57b2a8f601dd5972b47b ]
In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:
Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
ESR = 0x96000047
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000047
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp =
0000000028cc735c
[
ffff000012233c40] pgd=
00000000bffff003, pud=
00000000bfffe003,
pmd=
00000000ba8b8003, pte=
0000000000000000
Internal error: Oops:
96000047 [#2] PREEMPT SMP
...
Call trace:
__memcpy+0x74/0x180
ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
ufs_bsg_request+0x178/0x3b0
bsg_queue_rq+0xc0/0x118
blk_mq_dispatch_rq_list+0xb0/0x538
blk_mq_sched_dispatch_requests+0x18c/0x1d8
__blk_mq_run_hw_queue+0xb4/0x118
blk_mq_run_work_fn+0x28/0x38
process_one_work+0x1ec/0x470
worker_thread+0x48/0x458
kthread+0x130/0x138
ret_from_fork+0x10/0x1c
Code:
540000ab a8c12027 a88120c7 a8c12027 (
a88120c7)
---[ end trace
793e1eb5dff69f2d ]---
note: kworker/0:2H[2054] exited with preempt_count 1
This patch is to move "descriptor = NULL" down to below the label
"out_unlock".
Fixes:
d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Mon, 11 Nov 2019 05:21:31 +0000 (23:21 -0600)]
PCI: rpaphp: Fix up pointer to first drc-info entry
[ Upstream commit
9723c25f99aff0451cfe6392e1b9fdd99d0bf9f0 ]
The first entry of the ibm,drc-info property is an int encoded count
of the number of drc-info entries that follow. The "value" pointer
returned by of_prop_next_u32() is still pointing at the this value
when we call of_read_drc_info_cell(), but the helper function
expects that value to be pointing at the first element of an entry.
Fix up by incrementing the "value" pointer to point at the first
element of the first drc-info entry prior.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-5-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Mon, 11 Nov 2019 23:03:57 +0000 (15:03 -0800)]
scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences
[ Upstream commit
6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]
Coverity reported the following:
*** CID 101747: Null pointer dereferences (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433 kfree(mp);
4434 }
4435 mempool_free(mbox, phba->mbox_mem_pool);
4436 }
4437 out:
4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv CID 101747: Null pointer dereferences (FORWARD_NULL)
vvv Dereferencing null pointer "shost".
4439 spin_lock_irq(shost->host_lock);
4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441 spin_unlock_irq(shost->host_lock);
4442
4443 /* If the node is not being used by another discovery thread,
4444 * and we are sending a reject, we are done with it.
Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes:
2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")
CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Khlebnikov [Sun, 10 Nov 2019 09:49:06 +0000 (12:49 +0300)]
fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long
[ Upstream commit
6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ]
Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.
Result may looks like:
fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -
489852115
fs.quota.drops = -
487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -
486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689
Values bigger than 2^31-1 reported as negative.
All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.
Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.
Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Wed, 2 Oct 2019 11:25:22 +0000 (19:25 +0800)]
irqchip: ingenic: Error out if IRQ domain creation failed
[ Upstream commit
52ecc87642f273a599c9913b29fd179c13de457b ]
If we cannot create the IRQ domain, the driver should fail to probe
instead of succeeding with just a warning message.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Thu, 24 Oct 2019 20:14:13 +0000 (13:14 -0700)]
irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary
[ Upstream commit
27eebb60357ed5aa6659442f92907c0f7368d6ae ]
If the 'brcm,irq-can-wake' property is specified, make sure we also
enable the corresponding parent interrupt we are attached to.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Hennerich [Fri, 8 Nov 2019 07:17:18 +0000 (09:17 +0200)]
clk: clk-gpio: propagate rate change to parent
[ Upstream commit
fc59462c5ce60da119568fac325c92fc6b7c6175 ]
For an external clock source, which is gated via a GPIO, the
rate change should typically be propagated to the parent clock.
The situation where we are requiring this propagation, is when an
external clock is connected to override an internal clock (which typically
has a fixed rate). The external clock can have a different rate than the
internal one, and may also be variable, thus requiring the rate
propagation.
This rate change wasn't propagated until now, and it's unclear about cases
where this shouldn't be propagated. Thus, it's unclear whether this is
fixing a bug, or extending the current driver behavior. Also, it's unsure
about whether this may break any existing setups; in the case that it does,
a device-tree property may be added to disable this flag.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lkml.kernel.org/r/20191108071718.17985-1-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeffrey Hugo [Thu, 31 Oct 2019 18:57:15 +0000 (11:57 -0700)]
clk: qcom: Allow constant ratio freq tables for rcg
[ Upstream commit
efd164b5520afd6fb2883b68e0d408a7de29c491 ]
Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range. It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:
{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
{ }
So, lets support that.
We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad. Then, we need ignore the freq from the
table, and instead base everything on the requested freq.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Thu, 7 Nov 2019 06:12:05 +0000 (14:12 +0800)]
f2fs: fix to update dir's i_pino during cross_rename
[ Upstream commit
2a60637f06ac94869b2e630eaf837110d39bf291 ]
As Eric reported:
RENAME_EXCHANGE support was just added to fsstress in xfstests:
commit
65dfd40a97b6bbbd2a22538977bab355c5bc0f06
Author: kaixuxia <xiakaixu1987@gmail.com>
Date: Thu Oct 31 14:41:48 2019 +0800
fsstress: add EXCHANGE renameat2 support
This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors.
I'm not sure what the problem is, but it still happens even with all the
fs-verity stuff in the test commented out, so that the test just runs fsstress.
generic/579 23s ... [10:02:25]
[ 7.745370] run fstests generic/579 at 2019-11-04 10:02:25
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
(see /results/f2fs/results-default/generic/579.full for details)
[10:02:47]
Ran: generic/579
Failures: generic/579
Failed 1 of 1 tests
Xunit report: /results/f2fs/results-default/result.xml
Here's the contents of 579.full:
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
*** fsck.f2fs output ***
[ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10]
The root cause is that we forgot to update directory's i_pino during
cross_rename, fix it.
Fixes:
32f9bc25cbda0 ("f2fs: support ->rename2()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Tue, 5 Nov 2019 00:56:58 +0000 (16:56 -0800)]
scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow
[ Upstream commit
7cfd5639d99bec0d27af089d0c8c114330e43a72 ]
If the driver receives a login that is later then LOGO'd by the remote port
(aka ndlp), the driver, upon the completion of the LOGO ACC transmission,
will logout the node and unregister the rpi that is being used for the
node. As part of the unreg, the node's rpi value is replaced by the
LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the
offline walks the nodes and ensures they are logged out, which possibly
entails unreg'ing their rpi values. This path does not validate the node's
rpi value, thus doesn't detect that it has been unreg'd already. The
replaced rpi value is then used when accessing the rpi bitmask array which
tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid
index for the bitmask, it may fault the system.
Revise the rpi release code to detect when the rpi value is the replaced
RPI_ALLOC_ERROR value and ignore further release steps.
Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Tue, 5 Nov 2019 21:55:53 +0000 (13:55 -0800)]
scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)
[ Upstream commit
f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]
According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.
Fixes:
bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Tue, 5 Nov 2019 16:44:19 +0000 (17:44 +0100)]
jbd2: Fix statistics for the number of logged blocks
[ Upstream commit
015c6033068208d6227612c878877919f3fcf6b6 ]
jbd2 statistics counting number of blocks logged in a transaction was
wrong. It didn't count the commit block and more importantly it didn't
count revoke descriptor blocks. Make sure these get properly counted.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Bobrowski [Tue, 5 Nov 2019 11:59:37 +0000 (22:59 +1100)]
ext4: iomap that extends beyond EOF should be marked dirty
[ Upstream commit
2e9b51d78229d5145725a481bb5464ebc0a3f9b2 ]
This patch addresses what Dave Chinner had discovered and fixed within
commit:
7684e2c4384d. This changes does not have any user visible
impact for ext4 as none of the current users of ext4_iomap_begin()
that extend files depend on IOMAP_F_DIRTY.
When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.
However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion when
O_DSYNC writes are being used and the hardware supports FUA.
Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync() to
flush the inode size update to stable storage correctly.
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8b43ee9ee94bee5328da56ba0909b7d2229ef150.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Bobrowski [Tue, 5 Nov 2019 11:59:22 +0000 (22:59 +1100)]
ext4: update direct I/O read lock pattern for IOCB_NOWAIT
[ Upstream commit
548feebec7e93e58b647dba70b3303dcb569c914 ]
This patch updates the lock pattern in ext4_direct_IO_read() to not
block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The
locking condition implemented here is similar to that of
942491c9e6d6
("xfs: fix AIM7 regression").
Fixes:
16c54688592c ("ext4: Allow parallel DIO reads")
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c5d5e759f91747359fbd2c6f9a36240cf75ad79f.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aneesh Kumar K.V [Tue, 1 Oct 2019 08:46:56 +0000 (14:16 +0530)]
powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning
[ Upstream commit
16f6b67cf03cb43db7104acb2ca877bdc2606c92 ]
With large memory (8TB and more) hotplug, we can get soft lockup
warnings as below. These were caused by a long loop without any
explicit cond_resched which is a problem for !PREEMPT kernels.
Avoid this using cond_resched() while inserting hash page table
entries. We already do similar cond_resched() in __add_pages(), see
commit
f64ac5e6e306 ("mm, memory_hotplug: add scheduling point to
__add_pages").
rcu: 3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001
(t=24003 jiffies g=4285 q=2002)
NMI backtrace for cpu 3
CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
nmi_cpu_backtrace+0x124/0x130
nmi_trigger_cpumask_backtrace+0x1ac/0x1f0
arch_trigger_cpumask_backtrace+0x28/0x3c
rcu_dump_cpu_stacks+0xf8/0x154
rcu_sched_clock_irq+0x878/0xb40
update_process_times+0x48/0x90
tick_sched_handle.isra.16+0x4c/0x80
tick_sched_timer+0x68/0xe0
__hrtimer_run_queues+0x180/0x430
hrtimer_interrupt+0x110/0x300
timer_interrupt+0x108/0x2f0
decrementer_common+0x114/0x120
--- interrupt: 901 at arch_add_memory+0xc0/0x130
LR = arch_add_memory+0x74/0x130
memremap_pages+0x494/0x650
devm_memremap_pages+0x3c/0xa0
pmem_attach_disk+0x188/0x750
nvdimm_bus_probe+0xac/0x2c0
really_probe+0x148/0x570
driver_probe_device+0x19c/0x1d0
device_driver_attach+0xcc/0x100
bind_store+0x134/0x1c0
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1a0/0x270
__vfs_write+0x3c/0x70
vfs_write+0xd0/0x260
ksys_write+0xdc/0x130
system_call+0x5c/0x68
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001084656.31277-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anthony Steinhauser [Tue, 29 Oct 2019 19:07:59 +0000 (12:07 -0700)]
powerpc/security/book3s64: Report L1TF status in sysfs
[ Upstream commit
8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]
Some PowerPC CPUs are vulnerable to L1TF to the same extent as to
Meltdown. It is also mitigated by flushing the L1D on privilege
transition.
Currently the sysfs gives a false negative on L1TF on CPUs that I
verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV
T2P9D01.
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]
Link: https://lore.kernel.org/r/20191029190759.84821-1-asteinhauser@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 16 Oct 2019 14:47:45 +0000 (16:47 +0200)]
clocksource/drivers/timer-of: Use unique device name instead of timer
[ Upstream commit
4411464d6f8b5e5759637235a6f2b2a85c2be0f1 ]
If a hardware-specific driver does not provide a name, the timer-of core
falls back to device_node.name. Due to generic DT node naming policies,
that name is almost always "timer", and thus doesn't identify the actual
timer used.
Fix this by using device_node.full_name instead, which includes the unit
addrees.
Example impact on /proc/timer_list:
-Clock Event Device: timer
+Clock Event Device: timer@
fcfec400
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Wed, 16 Oct 2019 12:43:30 +0000 (20:43 +0800)]
clocksource/drivers/asm9260: Add a check for of_clk_get
[ Upstream commit
6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ]
asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guido Günther [Sat, 21 Sep 2019 21:12:10 +0000 (14:12 -0700)]
leds: lm3692x: Handle failure to probe the regulator
[ Upstream commit
396128d2ffcba6e1954cfdc9a89293ff79cbfd7c ]
Instead use devm_regulator_get_optional since the regulator
is optional and check for errors.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 28 Oct 2019 21:56:46 +0000 (14:56 -0700)]
dma-debug: add a schedule point in debug_dma_dump_mappings()
[ Upstream commit
9ff6aa027dbb98755f0265695354f2dd07c0d1ce ]
debug_dma_dump_mappings() can take a lot of cpu cycles :
lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump
real 0m0.463s
user 0m0.003s
sys 0m0.459s
Let's add a cond_resched() to avoid holding cpu for too long.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Thu, 24 Oct 2019 00:47:30 +0000 (11:47 +1100)]
powerpc/tools: Don't quote $objdump in scripts
[ Upstream commit
e44ff9ea8f4c8a90c82f7b85bd4f5e497c841960 ]
Some of our scripts are passed $objdump and then call it as
"$objdump". This doesn't work if it contains spaces because we're
using ccache, for example you get errors such as:
./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory
./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory
Fix it by not quoting the string when we expand it, allowing the shell
to do the right thing for us.
Fixes:
a71aa05e1416 ("powerpc: Convert relocs_check to a shell script using grep")
Fixes:
4ea80652dc75 ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024004730.32135-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aneesh Kumar K.V [Thu, 24 Oct 2019 09:35:41 +0000 (15:05 +0530)]
powerpc/pseries: Don't fail hash page table insert for bolted mapping
[ Upstream commit
75838a3290cd4ebbd1f567f310ba04b6ef017ce4 ]
If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table
insert by removing a random entry from the group.
After some runtime, it is very well possible to find all the 8 hash page table
entry slot in the hpte group used for mapping. Don't fail a bolted entry insert
in that case. With Storage class memory a user can find this error easily since
a namespace enable/disable is equivalent to memory add/remove.
This results in failures as reported below:
$ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M
libndctl: ndctl_dax_enable: dax1.3: failed to enable
Error: namespace1.2: failed to enable
failed to create namespace: No such device or address
In kernel log we find the details as below:
Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1
dax_pmem: probe of dax1.3 failed with error -14
This indicates that we failed to create a bolted hash table entry for direct-map
address backing the namespace.
We also observe failures such that not all namespaces will be enabled with
ndctl enable-namespace all command.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Sun, 13 Oct 2019 10:23:51 +0000 (21:23 +1100)]
powerpc/pseries: Mark accumulate_stolen_time() as notrace
[ Upstream commit
eb8e20f89093b64f48975c74ccb114e6775cee22 ]
accumulate_stolen_time() is called prior to interrupt state being
reconciled, which can trip the warning in arch_local_irq_restore():
WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
...
NIP .arch_local_irq_restore+0x9c/0x130
LR .rb_start_commit+0x38/0x80
Call Trace:
.ring_buffer_lock_reserve+0xe4/0x620
.trace_function+0x44/0x210
.function_trace_call+0x148/0x170
.ftrace_ops_no_ops+0x180/0x1d0
ftrace_call+0x4/0x8
.accumulate_stolen_time+0x1c/0xb0
decrementer_common+0x124/0x160
For now just mark it as notrace. We may change the ordering to call it
after interrupt state has been reconciled, but that is a larger
change.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiang Chen [Thu, 24 Oct 2019 14:08:11 +0000 (22:08 +0800)]
scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()
[ Upstream commit
550c0d89d52d3bec5c299f69b4ed5d2ee6b8a9a6 ]
For IOs from upper layer, preemption may be disabled as it may be called by
function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables
preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function
hisi_sas_task_exec(), it may disable preempt twice after down() and up()
which will cause following call trace:
BUG: scheduling while atomic: fio/60373/0x00000002
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xa0/0xc4
__schedule_bug+0x68/0x88
__schedule+0x4b8/0x548
schedule+0x40/0xd0
schedule_timeout+0x200/0x378
__down+0x78/0xc8
down+0x54/0x70
hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main]
hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
sas_queuecommand+0x168/0x1b0 [libsas]
scsi_queue_rq+0x2ac/0x980
blk_mq_dispatch_rq_list+0xb0/0x550
blk_mq_do_dispatch_sched+0x6c/0x110
blk_mq_sched_dispatch_requests+0x114/0x1d8
__blk_mq_run_hw_queue+0xb8/0x130
__blk_mq_delay_run_hw_queue+0x1c0/0x220
blk_mq_run_hw_queue+0xb0/0x128
blk_mq_sched_insert_requests+0xdc/0x208
blk_mq_flush_plug_list+0x1b4/0x3a0
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x3c/0x50
blkdev_direct_IO+0x404/0x550
generic_file_read_iter+0x9c/0x848
blkdev_read_iter+0x50/0x78
aio_read+0xc8/0x170
io_submit_one+0x1fc/0x8d8
__arm64_sys_io_submit+0xdc/0x280
el0_svc_common.constprop.0+0xe0/0x1e0
el0_svc_handler+0x34/0x90
el0_svc+0x10/0x14
...
To solve the issue, check preemptible() to avoid disabling preempt multiple
when flag HISI_SAS_REJECT_CMD_BIT is set.
Link: https://lore.kernel.org/r/1571926105-74636-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Sat, 19 Oct 2019 08:59:13 +0000 (11:59 +0300)]
scsi: csiostor: Don't enable IRQs too early
[ Upstream commit
d6c9b31ac3064fbedf8961f120a4c117daa59932 ]
These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.
Fixes:
a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Fri, 18 Oct 2019 21:18:20 +0000 (14:18 -0700)]
scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices
[ Upstream commit
feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]
When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.
Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.
Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Disseldorp [Thu, 12 Sep 2019 09:55:45 +0000 (11:55 +0200)]
scsi: target: compare full CHAP_A Algorithm strings
[ Upstream commit
9cef2a7955f2754257a7cddedec16edae7b587d0 ]
RFC 2307 states:
For CHAP [RFC1994], in the first step, the initiator MUST send:
CHAP_A=<A1,A2...>
Where A1,A2... are proposed algorithms, in order of preference.
...
For the Algorithm, as stated in [RFC1994], one value is required to
be implemented:
5 (CHAP with MD5)
LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Graumann [Tue, 15 Oct 2019 14:48:24 +0000 (20:18 +0530)]
dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset
[ Upstream commit
8a631a5a0f7d4a4a24dba8587d5d9152be0871cc ]
Whenever we reset the channel, we need to clear desc_pendingcount
along with desc_submitcount. Otherwise when a new transaction is
submitted, the irq coalesce level could be programmed to an incorrect
value in the axidma case.
This behavior can be observed when terminating pending transactions
with xilinx_dma_terminate_all() and then submitting new transactions
without releasing and requesting the channel.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Wed, 16 Oct 2019 11:50:26 +0000 (13:50 +0200)]
iommu/tegra-smmu: Fix page tables in > 4 GiB memory
[ Upstream commit
96d3ab802e4930a29a33934373157d6dff1b2c7e ]
Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.
Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Wed, 2 Oct 2019 17:29:23 +0000 (14:29 -0300)]
iommu: rockchip: Free domain on .domain_free
[ Upstream commit
42bb97b80f2e3bf592e3e99d109b67309aa1b30e ]
IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.
Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Fri, 27 Sep 2019 10:01:35 +0000 (18:01 +0800)]
f2fs: fix to update time in lazytime mode
[ Upstream commit
fe1897eaa6646f5a64a4cee0e6473ed9887d324b ]
generic/018 reports an inconsistent status of atime, the
testcase is as below:
- open file with O_SYNC
- write file to construct fraged space
- calc md5 of file
- record {a,c,m}time
- defrag file --- do nothing
- umount & mount
- check {a,c,m}time
The root cause is, as f2fs enables lazytime by default, atime
update will dirty vfs inode, rather than dirtying f2fs inode (by set
with FI_DIRTY_INODE), so later f2fs_write_inode() called from VFS will
fail to update inode page due to our skip:
f2fs_write_inode()
if (is_inode_flag_set(inode, FI_DIRTY_INODE))
return 0;
So eventually, after evict(), we lose last atime for ever.
To fix this issue, we need to check whether {a,c,m,cr}time is
consistent in between inode cache and inode page, and only skip
f2fs_update_inode() if f2fs inode is not dirty and time is
consistent as well.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Green [Wed, 2 Oct 2019 21:00:21 +0000 (14:00 -0700)]
Input: atmel_mxt_ts - disable IRQ across suspend
[ Upstream commit
463fa44eec2fef50d111ed0199cf593235065c04 ]
Across suspend and resume, we are seeing error messages like the following:
atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)
This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.
Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Sep 2019 03:58:53 +0000 (20:58 -0700)]
scsi: lpfc: Fix locking on mailbox command completion
[ Upstream commit
07b8582430370097238b589f4e24da7613ca6dd3 ]
Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:
The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.
The mailbox response data is only copied if there is a valid port-wide
pointer.
In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion. The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer. The completion path had cleared the active flag under lock, but
had not touched the port pointer. The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.
Fix by making the calls that clear mbox state/port pointer while under
lock. Also slightly cleaned up the error path.
Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sreekanth Reddy [Fri, 13 Sep 2019 13:04:40 +0000 (09:04 -0400)]
scsi: mpt3sas: Fix clear pending bit in ioctl status
[ Upstream commit
782b281883caf70289ba6a186af29441a117d23e ]
When user issues diag register command from application with required size,
and if driver unable to allocate the memory, then it will fail the register
command. While failing the register command, driver is not currently
clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set
before trying to allocate the memory. As this bit is set, subsequent
register command will be failed with BUSY status even when user wants to
register the trace buffer will less memory.
Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag
register command with no memory status.
Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Sep 2019 03:58:55 +0000 (20:58 -0700)]
scsi: lpfc: Fix discovery failures when target device connectivity bounces
[ Upstream commit
3f97aed6117c7677eb16756c4ec8b86000fd5822 ]
An issue was seen discovering all SCSI Luns when a target device undergoes
link bounce.
The driver currently does not qualify the FC4 support on the target.
Therefore it will send a SCSI PRLI and an NVMe PRLI. The expectation is
that the target will reject the PRLI if it is not supported. If a PRLI
times out, the driver will retry. The driver will not proceed with the
device until both SCSI and NVMe PRLIs are resolved. In the failure case,
the device is FCP only and does not respond to the NVMe PRLI, thus
initiating the wait/retry loop in the driver. During that time, a RSCN is
received (device bounced) causing the driver to issue a GID_FT. The GID_FT
response comes back before the PRLI mess is resolved and it prematurely
cancels the PRLI retry logic and leaves the device in a STE_PRLI_ISSUE
state. Discovery with the target never completes or resets.
Fix by resetting the node state back to STE_NPR_NODE when GID_FT completes,
thereby restarting the discovery process for the node.
Link: https://lore.kernel.org/r/20190922035906.10977-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 31 Dec 2019 15:36:37 +0000 (16:36 +0100)]
Linux 4.19.92
Masami Hiramatsu [Thu, 24 Oct 2019 09:12:54 +0000 (18:12 +0900)]
perf probe: Fix to show function entry line as probe-able
commit
91e2f539eeda26ab00bd03fae8dc434c128c85ed upstream.
Fix die_walk_lines() to list the function entry line correctly. Since
the dwarf_entrypc() does not return the entry pc if the DIE has only
range attribute, __die_walk_funclines() fails to list the declaration
line (entry line) in that case.
To solve this issue, this introduces die_entrypc() which correctly
returns the entry PC (the first address range) even if the DIE has only
range attribute. With this fix die_walk_lines() shows the function entry
line is able to probe correctly.
Fixes:
4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Christie [Sun, 8 Dec 2019 22:51:50 +0000 (16:51 -0600)]
nbd: fix shutdown and recv work deadlock v2
commit
1c05839aa973cfae8c3db964a21f9c0eef8fcc21 upstream.
This fixes a regression added with:
commit
e9e006f5fcf2bab59149cb38a48a4817c1b538b4
Author: Mike Christie <mchristi@redhat.com>
Date: Sun Aug 4 14:10:06 2019 -0500
nbd: fix max number of supported devs
where we can deadlock during device shutdown. The problem occurs if
the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has
returned and the userspace app has droppped its reference via closing
the device and running nbd_release. The recv_work nbd_config_put call
would then drop the refcount to zero and try to destroy the config which
would try to do destroy_workqueue from the recv work.
This patch just has nbd_start_device_ioctl do a flush_workqueue when it
wakes so we know after the ioctl returns running works have exited. This
also fixes a possible race where we could try to reuse the device while
old recv_works are still running.
Cc: stable@vger.kernel.org
Fixes:
e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Tue, 17 Dec 2019 09:53:49 +0000 (11:53 +0200)]
mmc: sdhci: Add a quirk for broken command queuing
commit
75d27ea1abf7af3cc2cdec3513e74f52191605c8 upstream.
Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.
This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.
Fixes:
8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Tue, 17 Dec 2019 09:53:48 +0000 (11:53 +0200)]
mmc: sdhci: Workaround broken command queuing on Intel GLK
commit
bedf9fc01ff1f40cfd1a79ccacedd9f3cd8e652a upstream.
Command queuing has been reported broken on some Lenovo systems based on
Intel GLK. This is likely a BIOS issue, so disable command queuing for
Intel GLK if the BIOS vendor string is "LENOVO".
Fixes:
8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yangbo Lu [Mon, 16 Dec 2019 03:18:42 +0000 (11:18 +0800)]
mmc: sdhci-of-esdhc: fix P2020 errata handling
commit
fe0acab448f68c3146235afe03fb932e242ec94c upstream.
Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
This patch is to fix them.
host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
Fixes:
05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes:
a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Faiz Abbas [Fri, 6 Dec 2019 11:43:26 +0000 (17:13 +0530)]
mmc: sdhci: Update the tuning failed messages to pr_debug level
commit
2c92dd20304f505b6ef43d206fff21bda8f1f0ae upstream.
Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit
4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.
Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Villemoes [Wed, 4 Dec 2019 08:54:46 +0000 (09:54 +0100)]
mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"
commit
8b6dc6b2d60221e90703babbc141f063b8a07e72 upstream.
This reverts commit
5dd195522562542bc6ebe6e7bd47890d8b7ca93c.
First, the fix seems to be plain wrong, since the erratum suggests
waiting 5ms before setting setting SYSCTL[RSTD], but this msleep()
happens after the call of sdhci_reset() which is where that bit gets
set (if SDHCI_RESET_DATA is in mask).
Second, walking the whole device tree to figure out if some node has a
"fsl,p2020-esdhc" compatible string is hugely expensive - about 70 to
100 us on our mpc8309 board. Walking the device tree is done under a
raw_spin_lock, so this is obviously really bad on an -rt system, and a
waste of time on all.
In fact, since esdhc_reset() seems to get called around 100 times per
second, that mpc8309 now spends 0.8% of its time determining that
it is not a p2020. Whether those 100 calls/s are normal or due to some
other bug or misconfiguration, regularly hitting a 100 us
non-preemptible window is unacceptable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191204085447.27491-1-linux@rasmusvillemoes.dk
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Veerabhadrarao Badiganti [Tue, 26 Nov 2019 10:19:16 +0000 (10:19 +0000)]
mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
commit
fa56ac9792265354b565f28def7164e7d7db2b1e upstream.
The DDR_CONFIG register offset got updated after a specific
minor version of sdcc V4. This offset change has not been properly
taken care of while updating register changes for sdcc V5.
Correcting proper offset for this register.
Also updating this register value to reflect the recommended RCLK
delay.
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ea738ec72-fa0f852d-20f8-474a-80b2-4b0ef63b132c-000000@us-west-2.amazonses.com
Fixes:
f15358885dda ("mmc: sdhci-msm: Define new Register address map")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 9 Dec 2019 06:19:08 +0000 (06:19 +0000)]
powerpc/irq: fix stack overflow verification
commit
099bc4812f09155da77eeb960a983470249c9ce1 upstream.
Before commit
0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.
Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.
Fixes:
0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srikar Dronamraju [Thu, 5 Dec 2019 08:32:17 +0000 (14:02 +0530)]
powerpc/vcpu: Assume dedicated processors as non-preempt
commit
14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.
With commit
247f2f6f3c70 ("sched/core: Don't schedule threads on
pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule
tasks on wakeup. This leads to wrong choice of CPU, which in-turn
leads to larger wakeup latencies. Eventually, it leads to performance
regression in latency sensitive benchmarks like soltp, schbench etc.
On Powerpc, vcpu_is_preempted() only looks at yield_count. If the
yield_count is odd, the vCPU is assumed to be preempted. However
yield_count is increased whenever the LPAR enters CEDE state (idle).
So any CPU that has entered CEDE state is assumed to be preempted.
Even if vCPU of dedicated LPAR is preempted/donated, it should have
right of first-use since they are supposed to own the vCPU.
On a Power9 System with 32 cores:
# lscpu
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 8
Core(s) per socket: 1
Socket(s): 16
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-63
NUMA node1 CPU(s): 64-127
# perf stat -a -r 5 ./schbench
v5.4 v5.4 + patch
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 45
75.0000th: 62 75.0th: 63
90.0000th: 71 90.0th: 74
95.0000th: 77 95.0th: 78
*99.0000th: 91 *99.0th: 82
99.5000th: 707 99.5th: 83
99.9000th: 6920 99.9th: 86
min=0, max=10048 min=0, max=96
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 46
75.0000th: 61 75.0th: 64
90.0000th: 72 90.0th: 75
95.0000th: 79 95.0th: 79
*99.0000th: 691 *99.0th: 83
99.5000th: 3972 99.5th: 85
99.9000th: 8368 99.9th: 91
min=0, max=16606 min=0, max=117
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 46
75.0000th: 61 75.0th: 64
90.0000th: 71 90.0th: 75
95.0000th: 77 95.0th: 79
*99.0000th: 106 *99.0th: 83
99.5000th: 2364 99.5th: 84
99.9000th: 7480 99.9th: 90
min=0, max=10001 min=0, max=95
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 47
75.0000th: 62 75.0th: 65
90.0000th: 72 90.0th: 75
95.0000th: 78 95.0th: 79
*99.0000th: 93 *99.0th: 84
99.5000th: 108 99.5th: 85
99.9000th: 6792 99.9th: 90
min=0, max=17681 min=0, max=117
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 46 50.0th: 45
75.0000th: 62 75.0th: 64
90.0000th: 73 90.0th: 75
95.0000th: 79 95.0th: 79
*99.0000th: 113 *99.0th: 82
99.5000th: 2724 99.5th: 83
99.9000th: 6184 99.9th: 93
min=0, max=9887 min=0, max=111
Performance counter stats for 'system wide' (5 runs):
context-switches 43,373 ( +- 0.40% ) 44,597 ( +- 0.55% )
cpu-migrations 1,211 ( +- 5.04% ) 220 ( +- 6.23% )
page-faults 15,983 ( +- 5.21% ) 15,360 ( +- 3.38% )
Waiman Long suggested using static_keys.
Fixes:
247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Parth Shah <parth@linux.ibm.com>
Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Tested-by: Parth Shah <parth@linux.ibm.com>
[mpe: Move the key and setting of the key to pseries/setup.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yazen Ghannam [Thu, 21 Nov 2019 14:15:08 +0000 (08:15 -0600)]
x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[]
commit
966af20929ac24360ba3fac5533eb2ab003747da upstream.
Each logical CPU in Scalable MCA systems controls a unique set of MCA
banks in the system. These banks are not shared between CPUs. The bank
types and ordering will be the same across CPUs on currently available
systems.
However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while
other CPUs do not. In this case, the bank seen as Reserved on one CPU is
assumed to be the same type as the bank seen as a known type on another
CPU.
In general, this occurs when the hardware represented by the MCA bank
is disabled, e.g. disabled memory controllers on certain models, etc.
The MCA bank is disabled in the hardware, so there is no possibility of
getting an MCA/MCE from it even if it is assumed to have a known type.
For example:
Full system:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | UMC | UMC
2 | CS | CS
System with hardware disabled:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | UMC | RAZ
2 | CS | CS
For this reason, there is a single, global struct smca_banks[] that is
initialized at boot time. This array is initialized on each CPU as it
comes online. However, the array will not be updated if an entry already
exists.
This works as expected when the first CPU (usually CPU0) has all
possible MCA banks enabled. But if the first CPU has a subset, then it
will save a "Reserved" type in smca_banks[]. Successive CPUs will then
not be able to update smca_banks[] even if they encounter a known bank
type.
This may result in unexpected behavior. Depending on the system
configuration, a user may observe issues enumerating the MCA
thresholding sysfs interface. The issues may be as trivial as sysfs
entries not being available, or as severe as system hangs.
For example:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | RAZ | UMC
2 | CS | CS
Extend the smca_banks[] entry check to return if the entry is a
non-reserved type. Otherwise, continue so that CPUs that encounter a
known bank type can update smca_banks[].
Fixes:
68627a697c19 ("x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191121141508.141273-1-Yazen.Ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Khlebnikov [Thu, 31 Oct 2019 13:04:48 +0000 (16:04 +0300)]
x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()
commit
246ff09f89e54fdf740a8d496176c86743db3ec7 upstream.
... because interrupts are disabled that early and sending IPIs can
deadlock:
BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
no locks held by swapper/1/0.
irq event stamp: 0
hardirqs last enabled at (0): [<
0000000000000000>] 0x0
hardirqs last disabled at (0): [<
ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
softirqs last enabled at (0): [<
ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
softirqs last disabled at (0): [<
0000000000000000>] 0x0
Preemption disabled at:
[<
ffffffff8104703b>] start_secondary+0x3b/0x190
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.5.0-rc2+ #1
Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
Call Trace:
dump_stack
___might_sleep.cold.92
wait_for_completion
? generic_exec_single
rdmsr_safe_on_cpu
? wrmsr_on_cpus
mce_amd_feature_init
mcheck_cpu_init
identify_cpu
identify_secondary_cpu
smp_store_cpu_info
start_secondary
secondary_startup_64
The function smca_configure() is called only on the current CPU anyway,
therefore replace rdmsr_safe_on_cpu() with atomic rdmsr_safe() and avoid
the IPI.
[ bp: Update commit message. ]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/157252708836.3876.4604398213417262402.stgit@buzz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 12 Dec 2019 09:40:49 +0000 (09:40 +0000)]
KVM: arm64: Ensure 'params' is initialised when looking up sys register
commit
1ce74e96c2407df2b5867e5d45a70aacb8923c14 upstream.
Commit
4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
introduced 'find_reg_by_id()', which looks up a system register only if
the 'id' index parameter identifies a valid system register. As part of
the patch, existing callers of 'find_reg()' were ported over to the new
interface, but this breaks 'index_to_sys_reg_desc()' in the case that the
initial lookup in the vCPU target table fails because we will then call
into 'find_reg()' for the system register table with an uninitialised
'param' as the key to the lookup.
GCC 10 is bright enough to spot this (amongst a tonne of false positives,
but hey!):
| arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’:
| arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized]
| 983 | (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2);
| [...]
Revert the hunk of
4b927b94d5df which breaks 'index_to_sys_reg_desc()' so
that the old behaviour of checking the index upfront is restored.
Fixes:
4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212094049.12437-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 13 Dec 2019 18:50:11 +0000 (21:50 +0300)]
ext4: unlock on error in ext4_expand_extra_isize()
commit
7f420d64a08c1dcd65b27be82a27cf2bdb2e7847 upstream.
We need to unlock the xattr before returning on this error path.
Cc: stable@kernel.org # 4.13
Fixes:
c03b45b853f5 ("ext4, project: expand inode extra size if possible")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191213185010.6k7yl2tck3wlsdkt@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 2 Dec 2019 17:02:13 +0000 (18:02 +0100)]
ext4: check for directory entries too close to block end
commit
109ba779d6cca2d519c5dd624a3276d03e21948e upstream.
ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 2 Dec 2019 17:02:12 +0000 (18:02 +0100)]
ext4: fix ext4_empty_dir() for directories with holes
commit
64d4ce892383b2ad6d782e080d25502f91bf2a38 upstream.
Function ext4_empty_dir() doesn't correctly handle directories with
holes and crashes on bh->b_data dereference when bh is NULL. Reorganize
the loop to use 'offset' variable all the times instead of comparing
pointers to current direntry with bh->b_data pointer. Also add more
strict checking of '.' and '..' directory entries to avoid entering loop
in possibly invalid state on corrupted filesystems.
References: CVE-2019-19037
CC: stable@vger.kernel.org
Fixes:
4e19d6b65fb4 ("ext4: allow directory holes")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 16 Dec 2019 11:08:23 +0000 (11:08 +0000)]
staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value
commit
ab42b48f32d4c766420c3499ee9c0289b7028182 upstream.
The "auto-attach" handler function `gsc_hpdi_auto_attach()` calls
`dma_alloc_coherent()` in a loop to allocate some DMA data buffers, and
also calls it to allocate a buffer for a DMA descriptor chain. However,
it does not check the return value of any of these calls. Change
`gsc_hpdi_auto_attach()` to return `-ENOMEM` if any of these
`dma_alloc_coherent()` calls fail. This will result in the comedi core
calling the "detach" handler `gsc_hpdi_detach()` as part of the
clean-up, which will call `gsc_hpdi_free_dma()` to free any allocated
DMA coherent memory buffers.
Cc: <stable@vger.kernel.org> #4.6+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191216110823.216237-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 17 Dec 2019 19:06:04 +0000 (20:06 +0100)]
platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes
commit
133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.
At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):
Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5
We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.
This commits bumps the buffer size, fixing the error.
Fixes:
8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Dec 2019 11:55:25 +0000 (13:55 +0200)]
intel_th: pci: Add Elkhart Lake SOC support
commit
88385866bab8d5e18c7f45d1023052c783572e03 upstream.
This adds support for Intel Trace Hub in Elkhart Lake.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217115527.74383-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Dec 2019 11:55:24 +0000 (13:55 +0200)]
intel_th: pci: Add Comet Lake PCH-V support
commit
e4de2a5d51f97a6e720a1c0911f93e2d8c2f1c08 upstream.
This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erkka Talvitie [Wed, 11 Dec 2019 08:08:39 +0000 (10:08 +0200)]
USB: EHCI: Do not return -EPIPE when hub is disconnected
commit
64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream.
When disconnecting a USB hub that has some child device(s) connected to it
(such as a USB mouse), then the stack tries to clear halt and
reset device(s) which are _already_ physically disconnected.
The issue has been reproduced with:
CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE.
SW: U-Boot 2019.07 and kernel 4.19.40.
CPU: HP Proliant Microserver Gen8.
SW: Linux version 4.2.3-300.fc23.x86_64
In this situation there will be error bit for MMF active yet the
CERR equals EHCI_TUNE_CERR + halt. Existing implementation
interprets this as a stall [1] (chapter 8.4.5).
The possible conditions when the MMF will be active + halt
can be found from [2] (Table 4-13).
Fix for the issue is to check whether MMF is active and PID Code is
IN before checking for the stall. If these conditions are true then
it is not a stall.
What happens after the fix is that when disconnecting a hub with
attached device(s) the situation is not interpret as a stall.
[1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf]
[2] [https://www.intel.com/content/dam/www/public/us/en/documents/
technical-specifications/ehci-specification-for-usb.pdf]
Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Wed, 11 Dec 2019 10:28:41 +0000 (11:28 +0100)]
cpufreq: Avoid leaving stale IRQ work items during CPU offline
commit
85572c2c4a45a541e880e087b5b17a48198b2416 upstream.
The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.
Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.
If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point. Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever. In particular, a system-wide
deadlock may occur during CPU online as a result of that.
The failing scenario is as follows. CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu). It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline. The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above. Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3. When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.
To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.
Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.
Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.
Fixes:
99d14d0e16fa ("cpufreq: Process remote callbacks from any CPU if the platform permits")
Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/
Reported-by: Anson Huang <anson.huang@nxp.com>
Tested-by: Anson Huang <anson.huang@nxp.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suwan Kim [Fri, 13 Dec 2019 02:30:55 +0000 (11:30 +0900)]
usbip: Fix error path of vhci_recv_ret_submit()
commit
aabb5b833872524eaf28f52187e5987984982264 upstream.
If a transaction error happens in vhci_recv_ret_submit(), event
handler closes connection and changes port status to kick hub_event.
Then hub tries to flush the endpoint URBs, but that causes infinite
loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because
"vhci_priv" in vhci_urb_dequeue() was already released by
vhci_recv_ret_submit() before a transmission error occurred. Thus,
vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint()
continuously calls vhci_urb_dequeue().
The root cause of this issue is that vhci_recv_ret_submit()
terminates early without giving back URB when transaction error
occurs in vhci_recv_ret_submit(). That causes the error URB to still
be linked at endpoint list without “vhci_priv".
So, in the case of transaction error in vhci_recv_ret_submit(),
unlink URB from the endpoint, insert proper error code in
urb->status and give back URB.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suwan Kim [Fri, 13 Dec 2019 02:30:54 +0000 (11:30 +0900)]
usbip: Fix receive error in vhci-hcd when using scatter-gather
commit
d986294ee55d719562b20aabe15a39bf8f863415 upstream.
When vhci uses SG and receives data whose size is smaller than SG
buffer size, it tries to receive more data even if it acutally
receives all the data from the server. If then, it erroneously adds
error event and triggers connection shutdown.
vhci-hcd should check if it received all the data even if there are
more SG entries left. So, check if it receivces all the data from
the server in for_each_sg() loop.
Fixes:
ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213023055.19933-2-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 3 Dec 2019 11:24:58 +0000 (14:24 +0300)]
btrfs: return error pointer from alloc_test_extent_buffer
[ Upstream commit
b6293c821ea8fa2a631a2112cd86cd435effeb8b ]
Callers of alloc_test_extent_buffer have not correctly interpreted the
return value as error pointer, as alloc_test_extent_buffer should behave
as alloc_extent_buffer. The self-tests were unaffected but
btrfs_find_create_tree_block could call both functions and that would
cause problems up in the call chain.
Fixes:
faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Mon, 9 Dec 2019 08:03:12 +0000 (09:03 +0100)]
s390/ftrace: fix endless recursion in function_graph tracer
[ Upstream commit
6feeee8efc53035c3195b02068b58ae947538aa4 ]
The following sequence triggers a kernel stack overflow on s390x:
mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
echo function_graph > current_tracer
[crash]
This is because preempt_count_{add,sub} are in the list of traced
functions, which can be demonstrated by:
echo preempt_count_add >set_ftrace_filter
echo function_graph > current_tracer
[crash]
The stack overflow happens because get_tod_clock_monotonic() gets called
by ftrace but itself calls preempt_{disable,enable}(), which leads to a
endless recursion. Fix this by using preempt_{disable,enable}_notrace().
Fixes:
011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 3 Oct 2019 21:52:27 +0000 (22:52 +0100)]
drm/amdgpu: fix uninitialized variable pasid_mapping_needed
[ Upstream commit
17cf678a33c6196a3df4531fe5aec91384c9eeb5 ]
The boolean variable pasid_mapping_needed is not initialized and
there are code paths that do not assign it any value before it is
is read later. Fix this by initializing pasid_mapping_needed to
false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes:
6817bf283b2b ("drm/amdgpu: grab the id mgr lock while accessing passid_mapping")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Wed, 18 Dec 2019 01:19:11 +0000 (17:19 -0800)]
usb: xhci: Fix build warning seen with CONFIG_PM=n
[ Upstream commit
6056a0f8ede27b296d10ef46f7f677cc9d715371 ]
The following build warning is seen if CONFIG_PM is disabled.
drivers/usb/host/xhci-pci.c:498:13: warning:
unused function 'xhci_pci_shutdown'
Fixes:
f2c710f7dca8 ("usb: xhci: only set D3hot for pci device")
Cc: Henry Lin <henryl@nvidia.com>
Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaolong Huang [Sat, 7 Dec 2019 14:40:24 +0000 (22:40 +0800)]
can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices
commit
da2311a6385c3b499da2ed5d9be59ce331fa93e9 upstream.
Uninitialized Kernel memory can leak to USB devices.
Fix this by using kzalloc() instead of kmalloc().
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Fixes:
7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Cc: linux-stable <stable@vger.kernel.org> # >= v4.19
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaotian Jing [Wed, 4 Dec 2019 07:19:58 +0000 (15:19 +0800)]
mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
commit
8f34e5bd7024d1ffebddd82d7318b1be17be9e9a upstream.
there is a chance that always get response CRC error after HS200 tuning,
the reason is that need set CMD_TA to 2. this modification is only for
MT8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: stable@vger.kernel.org
Fixes:
1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune")
Link: https://lore.kernel.org/r/20191204071958.18553-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Faiz Abbas [Thu, 28 Nov 2019 11:04:22 +0000 (16:34 +0530)]
Revert "mmc: sdhci: Fix incorrect switch to HS mode"
commit
07bcc411567cb96f9d1fc84fff8d387118a2920d upstream.
This reverts commit
c894e33ddc1910e14d6f2a2016f60ab613fd8b37.
This commit aims to treat SD High speed and SDR25 as the same while
setting UHS Timings in HOST_CONTROL2 which leads to failures with some
SD cards in AM65x. Revert this commit.
The issue this commit was trying to fix can be implemented in a platform
specific callback instead of common sdhci code.
Cc: <stable@vger.kernel.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Mon, 16 Sep 2019 18:30:56 +0000 (11:30 -0700)]
btrfs: don't prematurely free work in scrub_missing_raid56_worker()
[ Upstream commit
57d4f0b863272ba04ba85f86bfdc0f976f0af91c ]
Currently, scrub_missing_raid56_worker() puts and potentially frees
sblock (which embeds the work item) and then submits a bio through
scrub_wr_submit(). This is another potential instance of the bug in
"btrfs: don't prematurely free work in run_ordered_work()". Fix it by
dropping the reference after we submit the bio.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Omar Sandoval [Mon, 16 Sep 2019 18:30:55 +0000 (11:30 -0700)]
btrfs: don't prematurely free work in reada_start_machine_worker()
[ Upstream commit
e732fe95e4cad35fc1df278c23a32903341b08b3 ]
Currently, reada_start_machine_worker() frees the reada_machine_work and
then calls __reada_start_machine() to do readahead. This is another
potential instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
There _might_ already be a deadlock here: reada_start_machine_worker()
can depend on itself through stacked filesystems (__read_start_machine()
-> reada_start_machine_dev() -> reada_tree_block_flagged() ->
read_extent_buffer_pages() -> submit_one_bio() ->
btree_submit_bio_hook() -> btrfs_map_bio() -> submit_stripe_bio() ->
submit_bio() onto a loop device can trigger readahead on the lower
filesystem).
Either way, let's fix it by freeing the work at the end.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Fri, 22 Nov 2019 15:23:23 +0000 (15:23 +0000)]
net: phy: initialise phydev speed and duplex sanely
[ Upstream commit
a5d66f810061e2dd70fb7a108dcd14e535bc639f ]
When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.
There is a window at initialisation time where we may report link
down using the 0/-1 values. Tidy this up and use the predefined
constants, so debug doesn't complain with:
"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"
when the speed and duplex settings are printed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sam Bobroff [Sun, 17 Nov 2019 23:53:54 +0000 (10:53 +1100)]
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
[ Upstream commit
3d0e3ce52ce3eb4b9de3caf9c38dbb5a4d3e13c3 ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes:
27ae10641e9c ("drm/amdgpu: add interupt handler implementation for si v3")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Rapoport [Thu, 21 Nov 2019 16:21:31 +0000 (18:21 +0200)]
mips: fix build when "48 bits virtual memory" is enabled
[ Upstream commit
3ed6751bb8fa89c3014399bb0414348499ee202a ]
With CONFIG_MIPS_VA_BITS_48=y the build fails miserably:
CC arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/pgtable.h:644,
from include/linux/mm.h:99,
from arch/mips/kernel/asm-offsets.c:15:
include/asm-generic/pgtable.h:16:2: error: #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
#error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
^~~~~
include/asm-generic/pgtable.h:390:28: error: unknown type name 'p4d_t'; did you mean 'pmd_t'?
static inline int p4d_same(p4d_t p4d_a, p4d_t p4d_b)
^~~~~
pmd_t
[ ... more such errors ... ]
scripts/Makefile.build:99: recipe for target 'arch/mips/kernel/asm-offsets.s' failed
make[2]: *** [arch/mips/kernel/asm-offsets.s] Error 1
This happens because when CONFIG_MIPS_VA_BITS_48 enables 4th level of the
page tables, but neither pgtable-nop4d.h nor 5level-fixup.h are included to
cope with the 5th level.
Replace #ifdef conditions around includes of the pgtable-nop{m,u}d.h with
explicit CONFIG_PGTABLE_LEVELS and add include of 5level-fixup.h for the
case when CONFIG_PGTABLE_LEVELS==4
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hewenliang [Tue, 19 Nov 2019 01:44:15 +0000 (20:44 -0500)]
libtraceevent: Fix memory leakage in copy_filter_type
[ Upstream commit
10992af6bf46a2048ad964985a5b77464e5563b1 ]
It is necessary to free the memory that we have allocated when error occurs.
Fixes:
ef3072cd1d5c ("tools lib traceevent: Get rid of die in add_filter_type()")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Wed, 20 Nov 2019 11:27:38 +0000 (22:27 +1100)]
crypto: vmx - Avoid weird build failures
[ Upstream commit
4ee812f6143d78d8ba1399671d78c8d78bf2817c ]
In the vmx crypto Makefile we assign to a variable called TARGET and
pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts.
The variable is meant to describe what flavour of powerpc we're
building for, eg. either 32 or 64-bit, and big or little endian.
Unfortunately TARGET is a fairly common name for a make variable, and
if it happens that TARGET is specified as a command line parameter to
make, the value specified on the command line will override our value.
In particular this can happen if the kernel Makefile is driven by an
external Makefile that uses TARGET for something.
This leads to weird build failures, eg:
nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45.
/linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed
Which shows that we passed an empty value for $(TARGET) to the perl
script, confirmed with make V=1:
perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl > drivers/crypto/vmx/ghashp8-ppc.S
We can avoid this confusion by using override, to tell make that we
don't want anything to override our variable, even a value specified
on the command line. We can also use a less common name, given the
script calls it "flavour", let's use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Pedersen [Tue, 19 Nov 2019 05:35:38 +0000 (21:35 -0800)]
mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED
[ Upstream commit
08a5bdde3812993cb8eb7aa9124703df0de28e4b ]
Commit
7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
let STAs send QoS Null frames as PS triggers if the AP was
a QoS STA. However, the mac80211 PS stack relies on an
interface flag IEEE80211_STA_NULLFUNC_ACKED for
determining trigger frame ACK, which was not being set for
acked non-QoS Null frames. The effect is an inability to
trigger hardware sleep via IEEE80211_CONF_PS since the QoS
Null frame was seemingly never acked.
This bug only applies to drivers which set both
IEEE80211_HW_REPORTS_TX_ACK_STATUS and
IEEE80211_HW_PS_NULLFUNC_STACK.
Detect the acked QoS Null frame to restore STA power save.
Fixes:
7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20191119053538.25979-4-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Thu, 14 Nov 2019 10:49:06 +0000 (11:49 +0100)]
crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
[ Upstream commit
a7126603d46fe8f01aeedf589e071c6aaa6c6c39 ]
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings on sun4i-ss-hash.c.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Tue, 12 Nov 2019 02:38:34 +0000 (10:38 +0800)]
crypto: sun4i-ss - Fix 64-bit size_t warnings
[ Upstream commit
d6e9da21ee8246b5e556b3b153401ab045adb986 ]
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log