Junxiao Bi [Thu, 3 Apr 2014 21:46:51 +0000 (14:46 -0700)]
ocfs2: dlm: fix recovery hung
commit
ded2cf71419b9353060e633b59e446c42a6a2a09 upstream.
There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the
recovery process for a dead node. After the master sends FINALIZE_RECO
message in dlm_remaster_locks(), another node may become the recovery
master for another dead node, and then send the BEGIN_RECO message to
all the nodes included the old master, in the handler of this message
dlm_begin_reco_handler() of old master, dlm->reco.dead_node and
dlm->reco.new_master will be set to the second dead node and the new
master, then in dlm_reset_recovery(), these two variables will be reset
to default value. This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for
recovery.
old recovery master: new recovery master:
dlm_remaster_locks()
become recovery master for
another dead node.
dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{
if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
return -EAGAIN;
}
dlm_set_reco_master(dlm, br->node_idx);
dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
will hang in dlm_remaster_locks() for
request dlm locks info
Before send FINALIZE_RECO message, recovery master should set
DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done,
this can break the race windows as the BEGIN_RECO messages will not be
handled before DLM_RECO_STATE_FINALIZE flag is cleared.
A similar race may happen between new recovery master and normal node
which is in dlm_finalize_reco_handler(), also fix it.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Thu, 3 Apr 2014 21:46:49 +0000 (14:46 -0700)]
ocfs2: dlm: fix lock migration crash
commit
34aa8dac482f1358d59110d5e3a12f4351f6acaa upstream.
This issue was introduced by commit
800deef3f6f8 ("ocfs2: use
list_for_each_entry where benefical") in 2007 where it replaced
list_for_each with list_for_each_entry. The variable "lock" will point
to invalid data if "tmpq" list is empty and a panic will be triggered
due to this. Sunil advised reverting it back, but the old version was
also not right. At the end of the outer for loop, that
list_for_each_entry will also set "lock" to an invalid data, then in the
next loop, if the "tmpq" list is empty, "lock" will be an stale invalid
data and cause the panic. So reverting the list_for_each back and reset
"lock" to NULL to fix this issue.
Another concern is that this seemes can not happen because the "tmpq"
list should not be empty. Let me describe how.
old lock resource owner(node 1): migratation target(node 2):
image there's lockres with a EX lock from node 2 in
granted list, a NR lock from node x with convert_type
EX in converting list.
dlm_empty_lockres() {
dlm_pick_migration_target() {
pick node 2 as target as its lock is the first one
in granted list.
}
dlm_migrate_lockres() {
dlm_mark_lockres_migrating() {
res->state |= DLM_LOCK_RES_BLOCK_DIRTY;
wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res));
//after the above code, we can not dirty lockres any more,
// so dlm_thread shuffle list will not run
downconvert lock from EX to NR
upconvert lock from NR to EX
<<< migration may schedule out here, then
<<< node 2 send down convert request to convert type from EX to
<<< NR, then send up convert request to convert type from NR to
<<< EX, at this time, lockres granted list is empty, and two locks
<<< in the converting list, node x up convert lock followed by
<<< node 2 up convert lock.
// will set lockres RES_MIGRATING flag, the following
// lock/unlock can not run
dlm_lockres_release_ast(dlm, res);
}
dlm_send_one_lockres()
dlm_process_recovery_data()
for (i=0; i<mres->num_locks; i++)
if (ml->node == dlm->node_num)
for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
list_for_each_entry(lock, tmpq, list)
if (lock) break; <<< lock is invalid as grant list is empty.
}
if (lock->ml.node != ml->node)
BUG() >>> crash here
}
I see the above locks status from a vmcore of our internal bug.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Serge Hallyn [Thu, 3 Apr 2014 21:48:33 +0000 (14:48 -0700)]
xattr: guard against simultaneous glibc header inclusion
commit
ea1a8217b06b41b31a2b60b0b83f75c77ef9c873 upstream.
If the glibc xattr.h header is included after the uapi header,
compilation fails due to an enum re-using a #define from the uapi
header.
Protect against this by guarding the define and enum inclusions against
each other.
(See https://lists.debian.org/debian-glibc/2014/03/msg00029.html
and https://sourceware.org/glibc/wiki/Synchronizing_Headers
for more information.)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Allan McRae <allan@archlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Hua [Mon, 7 Apr 2014 22:38:57 +0000 (15:38 -0700)]
hung_task: check the value of "sysctl_hung_task_timeout_sec"
commit
80df28476505ed4e6701c3448c63c9229a50c655 upstream.
As sysctl_hung_task_timeout_sec is unsigned long, when this value is
larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in
watchdog will return immediately without sleep and with print :
schedule_timeout: wrong timeout value
ffffffffffffff83
and then the funtion watchdog will call schedule_timeout_interruptible
again and again. The screen will be filled with
"schedule_timeout: wrong timeout value
ffffffffffffff83"
This patch does some check and correction in sysctl, to let the function
schedule_timeout_interruptible allways get the valid parameter.
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Tested-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mizuma, Masayoshi [Mon, 7 Apr 2014 22:37:54 +0000 (15:37 -0700)]
mm: hugetlb: fix softlockup when a large number of hugepages are freed.
commit
55f67141a8927b2be3e51840da37b8a2320143ed upstream.
When I decrease the value of nr_hugepage in procfs a lot, softlockup
happens. It is because there is no chance of context switch during this
process.
On the other hand, when I allocate a large number of hugepages, there is
some chance of context switch. Hence softlockup doesn't happen during
this process. So it's necessary to add the context switch in the
freeing process as same as allocating process to avoid softlockup.
When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing
process occupied a CPU over 150 seconds and following softlockup message
appeared twice or more.
$ echo 6000000 > /proc/sys/vm/nr_hugepages
$ cat /proc/sys/vm/nr_hugepages
6000000
$ grep ^Huge /proc/meminfo
HugePages_Total: 6000000
HugePages_Free: 6000000
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
$ echo 0 > /proc/sys/vm/nr_hugepages
BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ...
Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1
Call Trace:
free_pool_huge_page+0xb8/0xd0
set_max_huge_pages+0x128/0x190
hugetlb_sysctl_handler_common+0x113/0x140
hugetlb_sysctl_handler+0x1e/0x20
proc_sys_call_handler+0x97/0xd0
proc_sys_write+0x14/0x20
vfs_write+0xb8/0x1a0
sys_write+0x51/0x90
__audit_syscall_exit+0x265/0x290
system_call_fastpath+0x16/0x1b
I have not confirmed this problem with upstream kernels because I am not
able to prepare the machine equipped with 12TB memory now. However I
confirmed that the amount of decreasing hugepages was directly
proportional to the amount of required time.
I measured required times on a smaller machine. It showed 130-145
hugepages decreased in a millisecond.
Amount of decreasing Required time Decreasing rate
hugepages (msec) (pages/msec)
------------------------------------------------------------
10,000 pages == 20GB 70 - 74 135-142
30,000 pages == 60GB 208 - 229 131-144
It means decrement of 6TB hugepages will trigger softlockup with the
default threshold 20sec, in this decreasing rate.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlastimil Babka [Mon, 7 Apr 2014 22:37:50 +0000 (15:37 -0700)]
mm: try_to_unmap_cluster() should lock_page() before mlocking
commit
57e68e9cd65b4b8eb4045a1e0d0746458502554c upstream.
A BUG_ON(!PageLocked) was triggered in mlock_vma_page() by Sasha Levin
fuzzing with trinity. The call site try_to_unmap_cluster() does not lock
the pages other than its check_page parameter (which is already locked).
The BUG_ON in mlock_vma_page() is not documented and its purpose is
somewhat unclear, but apparently it serializes against page migration,
which could otherwise fail to transfer the PG_mlocked flag. This would
not be fatal, as the page would be eventually encountered again, but
NR_MLOCK accounting would become distorted nevertheless. This patch adds
a comment to the BUG_ON in mlock_vma_page() and munlock_vma_page() to that
effect.
The call site try_to_unmap_cluster() is fixed so that for page !=
check_page, trylock_page() is attempted (to avoid possible deadlocks as we
already have check_page locked) and mlock_vma_page() is performed only
upon success. If the page lock cannot be obtained, the page is left
without PG_mlocked, which is again not a problem in the whole unevictable
memory design.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Weiner [Mon, 7 Apr 2014 22:37:48 +0000 (15:37 -0700)]
mm: page_alloc: spill to remote nodes before waking kswapd
commit
3a025760fc158b3726eac89ee95d7f29599e9dfa upstream.
On NUMA systems, a node may start thrashing cache or even swap anonymous
pages while there are still free pages on remote nodes.
This is a result of commits
81c0a2bb515f ("mm: page_alloc: fair zone
allocator policy") and
fff4068cba48 ("mm: page_alloc: revert NUMA aspect
of fair allocation policy").
Before those changes, the allocator would first try all allowed zones,
including those on remote nodes, before waking any kswapds. But now,
the allocator fastpath doubles as the fairness pass, which in turn can
only consider the local node to prevent remote spilling based on
exhausted fairness batches alone. Remote nodes are only considered in
the slowpath, after the kswapds are woken up. But if remote nodes still
have free memory, kswapd should not be woken to rebalance the local node
or it may thrash cash or swap prematurely.
Fix this by adding one more unfair pass over the zonelist that is
allowed to spill to remote nodes after the local fairness pass fails but
before entering the slowpath and waking the kswapds.
This also gets rid of the GFP_THISNODE exemption from the fairness
protocol because the unfair pass is no longer tied to kswapd, which
GFP_THISNODE is not allowed to wake up.
However, because remote spills can be more frequent now - we prefer them
over local kswapd reclaim - the allocation batches on remote nodes could
underflow more heavily. When resetting the batches, use
atomic_long_read() directly instead of zone_page_state() to calculate the
delta as the latter filters negative counter values.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Fleming [Thu, 3 Apr 2014 21:46:20 +0000 (14:46 -0700)]
sh: fix format string bug in stack tracer
commit
a0c32761e73c9999cbf592b702f284221fea8040 upstream.
Kees reported the following error:
arch/sh/kernel/dumpstack.c: In function 'print_trace_address':
arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security]
Use the "%s" format so that it's impossible to interpret 'data' as a
format string.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Reported-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Fri, 2 May 2014 21:26:30 +0000 (21:26 +0000)]
iser-target: Add missing se_cmd put for WRITE_PENDING in tx_comp_err
commit
03e7848a64ed535a30f5d7fc6dede2d5a6a2534b upstream.
This patch fixes a bug where outstanding RDMA_READs with WRITE_PENDING
status require an extra target_put_sess_cmd() in isert_put_cmd() code
when called from isert_cq_tx_comp_err() + isert_cq_drain_comp_llist()
context during session shutdown.
The extra kref PUT is required so that transport_generic_free_cmd()
invokes the last target_put_sess_cmd() -> target_release_cmd_kref(),
which will complete(&se_cmd->cmd_wait_comp) the outstanding se_cmd
descriptor with WRITE_PENDING status, and awake the completion in
target_wait_for_sess_cmds() to invoke TFO->release_cmd().
The bug was manifesting itself in target_wait_for_sess_cmds() where
a se_cmd descriptor with WRITE_PENDING status would end up sleeping
indefinately.
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Fri, 2 May 2014 21:26:29 +0000 (21:26 +0000)]
iser-target: Match FRMR descriptors to available session tags
commit
f46d6a8a01d6bbd83a97140f30a72a89b038807b upstream.
This patch changes isert_conn_create_fastreg_pool() to follow
logic in iscsi_target_locate_portal() for determining how many
FRMR descriptors to allocate based upon the number of possible
per-session command slots that are available.
This addresses an OOPs in isert_reg_rdma() where due to the
use of ISCSI_DEF_XMIT_CMDS_MAX could end up returning a bogus
fast_reg_descriptor when the number of active tags exceeded
the original hardcoded max.
Note this also includes moving isert_conn_create_fastreg_pool()
from isert_connect_request() to isert_put_login_tx() before
posting the final Login Response PDU in order to determine the
se_nacl->queue_depth (eg: number of tags) per session the target
will be enforcing.
v2 changes:
- Move isert_conn->conn_fr_pool list_head init into
isert_conn_request()
v3 changes:
- Drop unnecessary list_empty() check in isert_reg_rdma()
(Sagi)
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sam Bradshaw [Thu, 13 Mar 2014 21:33:30 +0000 (14:33 -0700)]
mtip32xx: mtip_async_complete() bug fixes
commit
5eb9291c36c7d71d7c6c832d5a4f551eb8ac015d upstream.
This patch fixes 2 issues in the fast completion path:
1) Possible double completions / double dma_unmap_sg() calls due to lack
of atomicity in the check and subsequent dereference of the upper layer
callback function. Fixed with cmpxchg before unmap and callback.
2) Regression in unaligned IO constraining workaround for p420m devices.
Fixed by checking if IO is unaligned and using proper semaphore if so.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Franciosi [Thu, 13 Mar 2014 14:34:21 +0000 (14:34 +0000)]
mtip32xx: Unmap the DMA segments before completing the IO request
commit
368c89d7ac70f937c93cd6f3b65bcfdfb3ba794f upstream.
If the buffers are unmapped after completing a request, then stale data
might be in the request.
Signed-off-by: Felipe Franciosi <felipe@paradoxo.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Franciosi [Thu, 13 Mar 2014 14:34:20 +0000 (14:34 +0000)]
mtip32xx: Set queue bounce limit
commit
1044b1bb9278f2e656a1a7b63dc24a59506540aa upstream.
We need to set the queue bounce limit during the device initialization to
prevent excessive bouncing on 32 bit architectures.
Signed-off-by: Felipe Franciosi <felipe@paradoxo.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Wed, 12 Mar 2014 15:30:38 +0000 (11:30 -0400)]
USB: unbind all interfaces before rebinding any
commit
6aec044cc2f5670cf3b143c151c8be846499bd15 upstream.
When a driver doesn't have pre_reset, post_reset, or reset_resume
methods, the USB core unbinds that driver when its device undergoes a
reset or a reset-resume, and then rebinds it afterward.
The existing straightforward implementation can lead to problems,
because each interface gets unbound and rebound before the next
interface is handled. If a driver claims additional interfaces, the
claim may fail because the old binding instance may still own the
additional interface when the new instance tries to claim it.
This patch fixes the problem by first unbinding all the interfaces
that are marked (i.e., their needs_binding flag is set) and then
rebinding all of them.
The patch also makes the helper functions in driver.c a little more
uniform and adjusts some out-of-date comments.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: "Poulain, Loic" <loic.poulain@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Mack [Wed, 16 Apr 2014 15:11:16 +0000 (17:11 +0200)]
usb: phy: am335x-control: wait 1ms after power-up transitions
commit
a31a942a148e0083ce560ffeb54fb60e06ab7201 upstream.
Tests have shown that when a power-up transition is followed by other
PHY operations too quickly, the USB port appears dead. Waiting 1ms fixes
this problem.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Simek [Tue, 11 Mar 2014 12:23:14 +0000 (13:23 +0100)]
usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
commit
ead5178bf442dbae4008ee54bf4f66a1f6a317c9 upstream.
Add new ulpi IDs which are available on Xilinx Zynq boards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Gortmaker [Tue, 14 Jan 2014 21:03:37 +0000 (16:03 -0500)]
hvc: ensure hvc_init is only ever called once in hvc_console.c
commit
f76a1cbed18c86e2d192455f0daebb48458965f3 upstream.
Commit
3e6c6f630a5282df8f3393a59f10eb9c56536d23 ("Delay creation of
khcvd thread") moved the call of hvc_init from being a device_initcall
into hvc_alloc, and used a non-null hvc_driver as indication of whether
hvc_init had already been called.
The problem with this is that hvc_driver is only assigned a value
at the bottom of hvc_init, and so there is a window where multiple
hvc_alloc calls can be in progress at the same time and hence try
and call hvc_init multiple times. Previously the use of device_init
guaranteed that hvc_init was only called once.
This manifests itself as sporadic instances of two hvc_init calls
racing each other, and with the loser of the race getting -EBUSY
from tty_register_driver() and hence that virtual console fails:
Couldn't register hvc console driver
virtio-ports vport0p1: error -16 allocating hvc for port
Here we add an atomic_t to guarantee we'll never run hvc_init twice.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes:
3e6c6f630a52 ("Delay creation of khcvd thread")
Reported-by: Jim Somerville <Jim.Somerville@windriver.com>
Tested-by: Jim Somerville <Jim.Somerville@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Fri, 28 Mar 2014 19:31:47 +0000 (14:31 -0500)]
usb: musb: fix PHY power on/off
commit
3063a12be2b07c64e9802708a19489342e64c1a3 upstream.
commi 30a70b0 (usb: musb: fix obex in g_nokia.ko
causing kernel panic) removed phy_power_on()
and phy_power_off() calls from runtime PM callbacks
but it failed to note that the driver depended
on pm_runtime_get_sync() calls to power up the PHY,
thus leaving some platforms without any means to
have a working PHY.
Fix that by enabling the phy during omap2430_musb_init()
and killing it in omap2430_musb_exit().
Fixes: 30a70b0 (usb: musb: fix obex in g_nokia.ko causing kernel panic)
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Reported-by: Michael Scott <hashcode0f@gmail.com>
Tested-by: Michael Scott <hashcode0f@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Tue, 25 Feb 2014 16:58:43 +0000 (10:58 -0600)]
usb: musb: avoid NULL pointer dereference
commit
eee3f15d5f1f4f0c283dd4db67dc1b874a2852d1 upstream.
instead of relying on the otg pointer, which
can be NULL in certain cases, we can use the
gadget and host pointers we already hold inside
struct musb.
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Tue, 4 Mar 2014 15:23:50 +0000 (09:23 -0600)]
usb: dwc3: fix randconfig build errors
commit
610183051d8f9421f138c4203ca894387f9f8839 upstream.
commit 388e5c5 (usb: dwc3: remove dwc3 dependency
on host AND gadget.) created the possibility for
host-only and peripheral-only dwc3 builds but
left a possible randconfig build error when host-only
builds are selected.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huang Rui [Tue, 7 Jan 2014 09:45:50 +0000 (17:45 +0800)]
usb: dwc3: fix wrong bit mask in dwc3_event_devt
commit
06f9b6e59661cee510b04513b13ea7927727d758 upstream.
Around DWC USB3 2.30a release another bit has been added to the
Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield.
Because of that, what used to be 8 bits long, has become 9 bits long.
Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of
Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits
not 8 bits. And the following reserved field uses [31:25] bits not
[31:24] bits, and it has 7 bits.
So in dwc3_event_devt, the bit mask should be:
event_info [24:16] 9 bits
reserved31_25 [31:25] 7 bits
This patch makes sure that newer core releases will work fine with
Linux and that we will decode the event information properly on new
core releases.
[ balbi@ti.com : improve commit log a bit ]
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfram Sang [Sat, 1 Feb 2014 18:26:00 +0000 (15:26 -0300)]
media: media: gspca: sn9c20x: add ID for Genius Look 1320 V2
commit
61f0319193c44adbbada920162d880b1fdb3aeb3 upstream.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Vaussard [Fri, 17 Jan 2014 19:37:38 +0000 (16:37 -0300)]
media: omap3isp: preview: Fix the crop margins
commit
8b57b9669aa884ac75b8d09c251d6b1755533c15 upstream.
Commit
3fdfedaaa "[media] omap3isp: preview: Lower the crop margins"
accidentally changed the previewer's cropping, causing the previewer
to miss four pixels on each line, thus corrupting the final image.
Restored the removed setting.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Fri, 7 Mar 2014 10:28:39 +0000 (07:28 -0300)]
media: saa7134: fix WARN_ON during resume
commit
30d652823de5fd7907d40e969a2d8e23938d8d03 upstream.
Do not attempt to reload the tuner modules when resuming after a suspend.
This triggers a WARN_ON in kernel/kmod.c:148 __request_module.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69581.
This has always been wrong, but it was never noticed until the WARN_ON
was added in 3.9.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antti Palosaari [Tue, 11 Mar 2014 09:53:16 +0000 (06:53 -0300)]
media: em28xx: fix PCTV 290e LNA oops
commit
3ec40dcfb413214b2874aec858870502b61c2202 upstream.
Pointer to device state has been moved to different location during
some change. PCTV 290e LNA function still uses old pointer, carried
over FE priv, and it crash.
Reported-by: Janne Kujanpää <jikuja@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 26 Feb 2014 02:05:39 +0000 (23:05 -0300)]
media: m88rs2000: add caps FE_CAN_INVERSION_AUTO
commit
3c8023a782964c72574ad8268ba0ea4e2d9772fc upstream.
The m88rs2000 frontend is always auto inversion.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Schaefer [Fri, 17 Jan 2014 17:18:42 +0000 (14:18 -0300)]
media: em28xx-audio: fix user counting in snd_em28xx_capture_open()
commit
01ae3b51af7144ea29eb28ba718b65ad59ab9493 upstream.
dev->adev.users always needs to be increased when snd_em28xx_capture_open() is
called and succeeds.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 26 Feb 2014 02:11:34 +0000 (23:11 -0300)]
media: m88rs2000: prevent frontend crash on continuous transponder scans
commit
8272d0a0c0d374a01721e579df6e8add5577132b upstream.
Add m88rs2000_get_tune_settings, min delay of 2000 ms on symbol
rate more than 3000000 and delay of 3000ms less than this.
Adding min delay prevents crashing the frontend on continuous
transponder scans. Other dvb_frontend_tune_settings remain as default.
This makes very little time difference to good channel scans, but slows down
the set frontend where lock can never be achieved i.e. DVB-S2.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Thu, 6 Mar 2014 10:24:21 +0000 (07:24 -0300)]
media: v4l2-compat-ioctl32: fix wrong VIDIOC_SUBDEV_G/S_EDID32 support
commit
bc826d6e39fe5f09cbadf8723e9183e6331b586f upstream.
The wrong ioctl numbers were used due to a copy-and-paste error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Tue, 4 Mar 2014 07:51:50 +0000 (04:51 -0300)]
media: v4l2-dv-timings: add module name, description, license
commit
c4885ada88e4331f8ac56d14296d0058359db2d7 upstream.
I completely forgot to add them when I made this module. Loading this module
without it will taint the kernel, which is not intended.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antoine Ténart [Fri, 7 Mar 2014 16:20:54 +0000 (17:20 +0100)]
video: atmel_lcdfb: ensure the hardware is initialized with the correct mode
commit
7d3477d801808a5037a511cf5a5aae5718e7ecce upstream.
If no driver takeover the atmel_lcdfb, the lcd won't be in a working state
since atmel_lcdfb_set_par() will never be called. Enabling a driver which does,
like fbcon, will call the function and put atmel_lcdfb in a working state.
Fixes:
b985172b328a (video: atmel_lcdfb: add device tree suport)
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Thu, 27 Feb 2014 09:04:57 +0000 (06:04 -0300)]
media: videodev2.h: add parenthesis around macro arguments
commit
aee786acfc0a12bcd37a1c60f3198fb25cf7181a upstream.
bt->width should be (bt)->width, and same for the other fields.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksij Rempel [Sun, 16 Feb 2014 09:59:32 +0000 (06:59 -0300)]
media: uvcvideo: Do not use usb_set_interface on bulk EP
commit
b1e43f232698274871e1358c276d7b0242a7d607 upstream.
The UVC specification uses alternate setting selection to notify devices
of stream start/stop. This breaks when using bulk-based devices, as the
video streaming interface has a single alternate setting in that case,
making video stream start and video stream stop events to appear
identical to the device. Bulk-based devices are thus not well supported
by UVC.
The webcam built in the Asus Zenbook UX302LA ignores the set interface
request and will keep the video stream enabled when the driver tries to
stop it. If USB autosuspend is enabled the device will then be suspended
and will crash, requiring a cold reboot.
USB trace capture showed that Windows sends a CLEAR_FEATURE(HALT)
request to the bulk endpoint when stopping the stream instead of
selecting alternate setting 0. The camera then behaves correctly, and
thus seems to require that behaviour.
Replace selection of alternate setting 0 with clearing of the endpoint
halt feature at video stream stop for bulk-based devices. Let's refrain
from blaming Microsoft this time, as it's not clear whether this
Windows-specific but USB-compliant behaviour was specifically developed
to handle bulkd-based UVC devices, or if the camera just took advantage
of it.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Cohen [Fri, 25 Apr 2014 16:20:16 +0000 (19:20 +0300)]
usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
commit
01bb59ebffdec314da8da66266edf29529372f9b upstream.
When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this
warning:
drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined
but not used [-Wunused-function]
Instead of creating nested #ifdefs, this patch fixes it by defining the
xHCI PCI stubs as inline.
This warning has been in since 3.2 kernel and was
caused by commit
421aa841a134f6a743111cf44d0c6d3b45e3cf8c
"usb/xhci: hide MSI code behind PCI bars", but wasn't noticed
until 3.13 when a configuration with these options was tried
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Gnatenko [Fri, 25 Apr 2014 16:20:15 +0000 (19:20 +0300)]
xhci: extend quirk for Renesas cards
commit
6db249ebefc6bf5c39f35dfaacc046d8ad3ffd70 upstream.
After suspend another Renesas PCI-X USB 3.0 card doesn't work.
[root@fedora-20 ~]# lspci -vmnnd 1912:
Device: 03:00.0
Class: USB controller [0c03]
Vendor: Renesas Technology Corp. [1912]
Device: uPD720202 USB 3.0 Host Controller [0015]
SVendor: Renesas Technology Corp. [1912]
SDevice: uPD720202 USB 3.0 Host Controller [0015]
Rev: 02
ProgIf: 30
This patch should be applied to stable kernel 3.14 that contain
the commit
1aa9578c1a9450fb21501c4f549f5b1edb557e6d
"xhci: Fix resume issues on Renesas chips in Samsung laptops"
Reported-and-tested-by: Anatoly Kharchenko <rfr-bugs@yandex.ru>
Reference: http://redmine.russianfedora.pro/issues/1315
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Turischev [Fri, 25 Apr 2014 16:20:14 +0000 (19:20 +0300)]
xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
commit
c09ec25d3684cad74d851c0f028a495999591279 upstream.
The same issue like with Panther Point chipsets. If the USB ports are
switched to xHCI on shutdown, the xHCI host will send a spurious interrupt,
which will wake the system. Some BIOS have work around for this, but not all.
One example is Compulab's mini-desktop, the Intense-PC2.
The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.
This patch should be backported to stable kernels as old as 3.12,
that contain the commit
638298dc66ea36623dbc2757a24fc2c4ab41b016
"xhci: Fix spurious wakeups after S5 on Haswell"
Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Mon, 3 Mar 2014 17:30:17 +0000 (19:30 +0200)]
xhci: Prevent runtime pm from autosuspending during initialization
commit
bcffae7708eb8352f44dc510b326541fe43a02a4 upstream.
xHCI driver has its own pci probe function that will call usb_hcd_pci_probe
to register its usb-2 bus, and then continue to manually register the
usb-3 bus. usb_hcd_pci_probe does a pm_runtime_put_noidle at the end and
might thus trigger a runtime suspend before the usb-3 bus is ready.
Prevent the runtime suspend by increasing the usage count in the
beginning of xhci_pci_probe, and decrease it once the usb-3Â bus is
ready.
xhci-platform driver is not using usb_hcd_pci_probe to set up
busses and should not need to have it's usage count increased during probe.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Wed, 26 Mar 2014 16:46:38 +0000 (18:46 +0200)]
usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1
commit
9c1b70361e0b38e4acb8e62b54da66538cb77ff2 upstream.
It was impossible to enumerate on a SuperSpeed (XHCI) host
with alternate setting = 1 due to the wrongly set 'bMaxBurst'
field in the SuperSpeed Endpoint Companion descriptor.
Testcase:
<host> modprobe -r usbtest; modprobe usbtest alt=1
<device> modprobe g_zero
plug device to SuperSpeed port on the host.
Without this patch the host always complains like so
"usb 12-2: Not enough bandwidth for new device state.
usb 12-2: Not enough bandwidth for altsetting 1"
Bug was introduced by commit
cf9a08ae in v3.9
Fixes:
cf9a08ae5aec (usb: gadget: convert source sink and loopback to
new function interface)
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory CLEMENT [Mon, 3 Mar 2014 16:48:34 +0000 (17:48 +0100)]
usb: gadget: atmel_usba: fix crashed during stopping when DEBUG is enabled
commit
d8eb6c653ef6b323d630de3c5685478469e248bc upstream.
commit 511f3c5 (usb: gadget: udc-core: fix a regression during gadget driver
unbinding) introduced a crash when DEBUG is enabled.
The debug trace in the atmel_usba_stop function made the assumption that the
driver pointer passed in parameter was not NULL, but since the commit above,
such assumption was no longer always true.
This commit now uses the driver pointer stored in udc which fixes this
issue.
[ balbi@ti.com : improved commit log a bit ]
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Tue, 11 Mar 2014 20:26:16 +0000 (13:26 -0700)]
usb: gadget: tcm_usb_gadget: stop format strings
commit
aba37fd975f0dd58e025c99c2a79b61b20190831 upstream.
This makes sure that the name coming out of configfs cannot be used
accidentally as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Mahoney [Wed, 2 Apr 2014 18:40:26 +0000 (14:40 -0400)]
reiserfs: fix race in readdir
commit
01d8885785a60ae8f4c37b0ed75bdc96d0fc6a44 upstream.
jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2)
The -ENOENT is due to readdir calling dir_emit on the same entry twice.
If the dir_emit callback sleeps and the tree is changed underneath us,
we won't be able to trust deh_offset(deh) anymore. We need to save
next_pos before we might sleep so we can find the next entry.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Mon, 7 Apr 2014 11:00:17 +0000 (12:00 +0100)]
DRM: armada: fix corruption while loading cursors
commit
c39b06951f1dc2e384650288676c5b7dcc0ec92c upstream.
Loading cursors to the LCD controller's SRAM can be corrupted when the
configured pixel clock is relatively slow. This seems to be caused
when we write back-to-back to the SRAM registers.
There doesn't appear to be any status register we can read to check
when an access has completed.
Inserting a dummy read between the writes appears to fix the problem.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Fri, 11 Apr 2014 10:25:40 +0000 (11:25 +0100)]
arm64: __NR_compat_syscalls fix
commit
838977f0178334bf3d7f3e974ea3154b68979be0 upstream.
This fixes commit
6290b53de025 (arm64: compat: Wire up new AArch32 syscalls)
which did not update __NR_compat_syscalls accordingly.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 23 Apr 2014 16:52:52 +0000 (17:52 +0100)]
word-at-a-time: avoid undefined behaviour in zero_bytemask macro
commit
ec6931b281797b69e6cf109f9cc94d5a2bf994e0 upstream.
The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.
Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.
An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.
Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Fleming [Thu, 10 Apr 2014 13:11:45 +0000 (14:11 +0100)]
efi: Pass correct file handle to efi_file_{read,close}
commit
47514c996fac5e6f13ef3a4c5e23f1c5cffabb7b upstream.
We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.
While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,
"The issue is the UEFI Fat driver might return the same function for
'fh->read()' and 'h->read()'. While in our case it does not work with
a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
case, we return a different pointer when reading a directory and
reading a file."
Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Fleming [Tue, 8 Apr 2014 12:14:00 +0000 (13:14 +0100)]
x86/efi: Correct EFI boot stub use of code32_start
commit
7e8213c1f3acc064aef37813a39f13cbfe7c3ce7 upstream.
code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.
The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.
Reported-by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K. Y. Srinivasan [Fri, 4 Apr 2014 01:02:45 +0000 (18:02 -0700)]
Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts
commit
03367ef5ea811475187a0732aada068919e14d61 upstream.
Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality
is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the
VMBUS protocol.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Grover [Fri, 4 Apr 2014 23:44:37 +0000 (16:44 -0700)]
target/tcm_fc: Fix use-after-free of ft_tpg
commit
2c42be2dd4f6586728dba5c4e197afd5cfaded78 upstream.
ft_del_tpg checks tpg->tport is set before unlinking the tpg from the
tport when the tpg is being removed. Set this pointer in ft_tport_create,
or the unlinking won't happen in ft_del_tpg and tport->tpg will reference
a deleted object.
This patch sets tpg->tport in ft_tport_create, because that's what
ft_del_tpg checks, and is the only way to get back to the tport to
clear tport->tpg.
The bug was occuring when:
- lport created, tport (our per-lport, per-provider context) is
allocated.
tport->tpg = NULL
- tpg created
- a PRLI is received. ft_tport_create is called, tpg is found and
tport->tpg is set
- tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not
set, tport->tpg is not cleared and points at freed memory
- Future calls to ft_tport_create return tport via first conditional,
instead of searching for new tpg by calling ft_lport_find_tpg.
tport->tpg is still invalid, and will access freed memory.
see https://bugzilla.redhat.com/show_bug.cgi?id=1071340
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Thu, 3 Apr 2014 03:35:02 +0000 (03:35 +0000)]
target/iblock: Fix double bioset_integrity_free bug
commit
d84287bcfe624697cd4f3c1df746beb53b86d9c4 upstream.
This patch fixes a double free bug during IBLOCK backend shutdown
where bioset_integrity_free() was incorrectly called ahead of
bioset_free(), who is already making the same call directly.
This bug was introduced with commit
ecebbf6cc, and will end up
triggering a general protection fault in iblock_free_device()
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Svec [Tue, 1 Apr 2014 14:03:02 +0000 (16:03 +0200)]
Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist
commit
a1e1774c6dfa3a524dd8df51ca95185fe5ef3247 upstream.
When compiled with CONFIG_DEBUG_SG set, uninitialized SGL leads
to BUG() in compare_and_write_callback().
Signed-off-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Fri, 28 Mar 2014 23:05:27 +0000 (19:05 -0400)]
target/rd: T10-Dif: RAM disk is allocating more space than required.
commit
9d2e59f2a778328a41771fe9a0098dadbc4314ba upstream.
Ram disk is allocating 8x more space than required for diff data.
For large RAM disk test, there is small potential for memory
starvation.
(Use block_size when calculating total_sg_needed - sagi + nab)
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Wed, 19 Feb 2014 23:32:14 +0000 (23:32 +0000)]
iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug
commit
d444edc679e7713412f243b792b1f964e5cff1e1 upstream.
This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message()
where during ERL=2 connection recovery, a bogus conn_p pointer could
end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION
notifying the initiator that cmd->logout_cid has failed.
The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with
a bogus conn_p pointer in iscsit_build_conn_drop_async_message().
Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 11 Feb 2014 16:06:33 +0000 (19:06 +0300)]
SCSI: arcmsr: upper 32 of dma address lost
commit
e2c70425f05219b142b3a8a9489a622c736db39d upstream.
The original code always set the upper 32 bits to zero because it was
doing a shift of the wrong variable.
Fixes:
1a4f550a09f8 ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 21 Jan 2014 07:00:10 +0000 (10:00 +0300)]
SCSI: qla2xxx: fix error handling of qla2x00_mem_alloc()
commit
b2a72ec32d0f499aaadf41264232517a12326df0 upstream.
qla2x00_mem_alloc() returns 1 on success and -ENOMEM on failure. On the
one hand the caller assumes non-zero is success but on the other hand
the caller also assumes that it returns an error code.
I've fixed it to return zero on success and a negative error code on
failure. This matches the documentation as well.
[jejb: checkpatch fix]
Fixes:
e315cd28b9ef ('[SCSI] qla2xxx: Code changes for qla data structure refactoring')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Mon, 7 Apr 2014 17:58:35 +0000 (13:58 -0400)]
ib_srpt: Use correct ib_sg_dma primitives
commit
b076808051f2c80d38e03fb2f1294f525c7a446d upstream.
The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().
This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Vinod Kumar <vinod.kumar@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moni Shoua [Thu, 27 Mar 2014 08:52:58 +0000 (10:52 +0200)]
IB/core: Don't resolve passive side RoCE L2 address in CMA REQ handler
commit
b2853fd6c2d0f383dbdf7427e263eb576a633867 upstream.
The code that resolves the passive side source MAC within the rdma_cm
connection request handler was both redundant and buggy, so remove it.
It was redundant since later, when an RC QP is modified to RTR state,
the resolution will take place in the ib_core module. It was buggy
because this callback also deals with UD SIDR exchange, for which we
incorrectly looked at the REQ member of the CM event and dereferenced
a random value.
Fixes:
dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yann Droneaud [Mon, 10 Mar 2014 22:06:28 +0000 (23:06 +0100)]
IB/qib: add missing braces in do_qib_user_sdma_queue_create()
commit
37a967651caf99dd267017023737bd442f5acb3d upstream.
Commit
c804f07248895ff9c moved qib_assign_ctxt() to
do_qib_user_sdma_queue_create() but dropped the braces
around the statements.
This was spotted by coccicheck (coccinelle/spatch):
$ make C=2 CHECK=scripts/coccicheck drivers/infiniband/hw/qib/
CHECK drivers/infiniband/hw/qib/qib_file_ops.c
drivers/infiniband/hw/qib/qib_file_ops.c:1583:2-23: code aligned with following code on line 1587
This patch adds braces back.
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: infinipath@intel.com
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: cocci@systeme.lip6.fr
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Fri, 7 Mar 2014 13:32:31 +0000 (08:32 -0500)]
IB/qib: Fix debugfs ordering issue with multiple HCAs
commit
f8b6c47a44c063062317646683a73371c24c69ee upstream.
The debugfs init code was incorrectly called before the idr mechanism
is used to get the unit number, so the dd->unit hasn't been
initialized. This caused the unit relative directory creation to fail
after the first.
This patch moves the init for the debugfs stuff until after all of the
failures and after the unit number has been determined.
A bug in unwind code in qib_alloc_devdata() is also fixed.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yann Droneaud [Mon, 10 Mar 2014 22:06:25 +0000 (23:06 +0100)]
IB/ehca: Returns an error on ib_copy_to_udata() failure
commit
5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream.
In case of error when writing to userspace, function ehca_create_cq()
does not set an error code before following its error path.
This patch sets the error code to -EFAULT when ib_copy_to_udata()
fails.
This was caught when using spatch (aka. coccinelle)
to rewrite call to ib_copy_{from,to}_udata().
Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yann Droneaud [Mon, 10 Mar 2014 22:06:26 +0000 (23:06 +0100)]
IB/mthca: Return an error on ib_copy_to_udata() failure
commit
08e74c4b00c30c232d535ff368554959403d0432 upstream.
In case of error when writing to userspace, the function mthca_create_cq()
does not set an error code before following its error path.
This patch sets the error code to -EFAULT when ib_copy_to_udata() fails.
This was caught when using spatch (aka. coccinelle)
to rewrite call to ib_copy_{from,to}_udata().
Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yann Droneaud [Mon, 10 Mar 2014 22:06:27 +0000 (23:06 +0100)]
IB/nes: Return an error on ib_copy_from_udata() failure instead of NULL
commit
9d194d1025f463392feafa26ff8c2d8247f71be1 upstream.
In case of error while accessing to userspace memory, function
nes_create_qp() returns NULL instead of an error code wrapped through
ERR_PTR(). But NULL is not expected by ib_uverbs_create_qp(), as it
check for error with IS_ERR().
As page 0 is likely not mapped, it is going to trigger an Oops when
the kernel will try to dereference NULL pointer to access to struct
ib_qp's fields.
In some rare cases, page 0 could be mapped by userspace, which could
turn this bug to a vulnerability that could be exploited: the function
pointers in struct ib_device will be under userspace total control.
This was caught when using spatch (aka. coccinelle)
to rewrite calls to ib_copy_{from,to}_udata().
Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null
Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dennis Dalessandro [Thu, 20 Feb 2014 16:02:53 +0000 (11:02 -0500)]
IB/ipath: Fix potential buffer overrun in sending diag packet routine
commit
a2cb0eb8a64adb29a99fd864013de957028f36ae upstream.
Guard against a potential buffer overrun. The size to read from the
user is passed in, and due to the padding that needs to be taken into
account, as well as the place holder for the ICRC it is possible to
overflow the 32bit value which would cause more data to be copied from
user space than is allocated in the buffer.
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Layton [Tue, 15 Apr 2014 12:51:48 +0000 (08:51 -0400)]
nfsd: set timeparms.to_maxval in setup_callback_client
commit
3758cf7e14b753838fe754ede3862af10b35fdac upstream.
...otherwise the logic in the timeout handling doesn't work correctly.
Spotted-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kinglong Mee [Wed, 26 Mar 2014 14:09:30 +0000 (22:09 +0800)]
NFSD: Traverse unconfirmed client through hash-table
commit
2b9056359889c78ea5decb5b654a512c2e8a945c upstream.
When stopping nfsd, I got BUG messages, and soft lockup messages,
The problem is cuased by double rb_erase() in nfs4_state_destroy_net()
and destroy_client().
This patch just let nfsd traversing unconfirmed client through
hash-table instead of rbtree.
[ 2325.021995] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 2325.022809] IP: [<
ffffffff8133c18c>] rb_erase+0x14c/0x390
[ 2325.022982] PGD
7a91b067 PUD
7a33d067 PMD 0
[ 2325.022982] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 2325.022982] Modules linked in: nfsd(OF) cfg80211 rfkill bridge stp
llc snd_intel8x0 snd_ac97_codec ac97_bus auth_rpcgss nfs_acl serio_raw
e1000 i2c_piix4 ppdev snd_pcm snd_timer lockd pcspkr joydev parport_pc
snd parport i2c_core soundcore microcode sunrpc ata_generic pata_acpi
[last unloaded: nfsd]
[ 2325.022982] CPU: 1 PID: 2123 Comm: nfsd Tainted: GF O
3.14.0-rc8+ #2
[ 2325.022982] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 2325.022982] task:
ffff88007b384800 ti:
ffff8800797f6000 task.ti:
ffff8800797f6000
[ 2325.022982] RIP: 0010:[<
ffffffff8133c18c>] [<
ffffffff8133c18c>]
rb_erase+0x14c/0x390
[ 2325.022982] RSP: 0018:
ffff8800797f7d98 EFLAGS:
00010246
[ 2325.022982] RAX:
ffff880079c1f010 RBX:
ffff880079f4c828 RCX:
0000000000000000
[ 2325.022982] RDX:
0000000000000000 RSI:
ffff880079bcb070 RDI:
ffff880079f4c810
[ 2325.022982] RBP:
ffff8800797f7d98 R08:
0000000000000000 R09:
ffff88007964fc70
[ 2325.022982] R10:
0000000000000000 R11:
0000000000000400 R12:
ffff880079f4c800
[ 2325.022982] R13:
ffff880079bcb000 R14:
ffff8800797f7da8 R15:
ffff880079f4c860
[ 2325.022982] FS:
0000000000000000(0000) GS:
ffff88007f900000(0000)
knlGS:
0000000000000000
[ 2325.022982] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 2325.022982] CR2:
0000000000000000 CR3:
000000007a3ef000 CR4:
00000000000006e0
[ 2325.022982] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2325.022982] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2325.022982] Stack:
[ 2325.022982]
ffff8800797f7de0 ffffffffa0191c6e ffff8800797f7da8
ffff8800797f7da8
[ 2325.022982]
ffff880079f4c810 ffff880079bcb000 ffffffff81cc26c0
ffff880079c1f010
[ 2325.022982]
ffff880079bcb070 ffff8800797f7e28 ffffffffa01977f2
ffff8800797f7df0
[ 2325.022982] Call Trace:
[ 2325.022982] [<
ffffffffa0191c6e>] destroy_client+0x32e/0x3b0 [nfsd]
[ 2325.022982] [<
ffffffffa01977f2>] nfs4_state_shutdown_net+0x1a2/0x220
[nfsd]
[ 2325.022982] [<
ffffffffa01700b8>] nfsd_shutdown_net+0x38/0x70 [nfsd]
[ 2325.022982] [<
ffffffffa017013e>] nfsd_last_thread+0x4e/0x80 [nfsd]
[ 2325.022982] [<
ffffffffa001f1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc]
[ 2325.022982] [<
ffffffffa017064b>] nfsd_destroy+0x5b/0x80 [nfsd]
[ 2325.022982] [<
ffffffffa0170773>] nfsd+0x103/0x130 [nfsd]
[ 2325.022982] [<
ffffffffa0170670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[ 2325.022982] [<
ffffffff810a8232>] kthread+0xd2/0xf0
[ 2325.022982] [<
ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[ 2325.022982] [<
ffffffff816c493c>] ret_from_fork+0x7c/0xb0
[ 2325.022982] [<
ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[ 2325.022982] Code: 48 83 e1 fc 48 89 10 0f 84 02 01 00 00 48 3b 41 10
0f 84 08 01 00 00 48 89 51 08 48 89 fa e9 74 ff ff ff 0f 1f 40 00 48 8b
50 10 <f6> 02 01 0f 84 93 00 00 00 48 8b 7a 10 48 85 ff 74 05 f6 07 01
[ 2325.022982] RIP [<
ffffffff8133c18c>] rb_erase+0x14c/0x390
[ 2325.022982] RSP <
ffff8800797f7d98>
[ 2325.022982] CR2:
0000000000000000
[ 2325.022982] ---[ end trace
28c27ed011655e57 ]---
[ 228.064071] BUG: soft lockup - CPU#0 stuck for 22s! [nfsd:558]
[ 228.064428] Modules linked in: ip6t_rpfilter ip6t_REJECT cfg80211
xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc
ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6
nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw
ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security
iptable_raw nfsd(OF) auth_rpcgss nfs_acl lockd snd_intel8x0
snd_ac97_codec ac97_bus joydev snd_pcm snd_timer e1000 sunrpc snd ppdev
parport_pc serio_raw pcspkr i2c_piix4 microcode parport soundcore
i2c_core ata_generic pata_acpi
[ 228.064539] CPU: 0 PID: 558 Comm: nfsd Tainted: GF O
3.14.0-rc8+ #2
[ 228.064539] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 228.064539] task:
ffff880076adec00 ti:
ffff880074616000 task.ti:
ffff880074616000
[ 228.064539] RIP: 0010:[<
ffffffff8133ba17>] [<
ffffffff8133ba17>]
rb_next+0x27/0x50
[ 228.064539] RSP: 0018:
ffff880074617de0 EFLAGS:
00000282
[ 228.064539] RAX:
ffff880074478010 RBX:
ffff88007446f860 RCX:
0000000000000014
[ 228.064539] RDX:
ffff880074478010 RSI:
0000000000000000 RDI:
ffff880074478010
[ 228.064539] RBP:
ffff880074617de0 R08:
0000000000000000 R09:
0000000000000012
[ 228.064539] R10:
0000000000000001 R11:
ffffffffffffffec R12:
ffffea0001d11a00
[ 228.064539] R13:
ffff88007f401400 R14:
ffff88007446f800 R15:
ffff880074617d50
[ 228.064539] FS:
0000000000000000(0000) GS:
ffff88007f800000(0000)
knlGS:
0000000000000000
[ 228.064539] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 228.064539] CR2:
00007fe9ac6ec000 CR3:
000000007a5d6000 CR4:
00000000000006f0
[ 228.064539] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 228.064539] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 228.064539] Stack:
[ 228.064539]
ffff880074617e28 ffffffffa01ab7db ffff880074617df0
ffff880074617df0
[ 228.064539]
ffff880079273000 ffffffff81cc26c0 ffffffff81cc26c0
0000000000000000
[ 228.064539]
0000000000000000 ffff880074617e48 ffffffffa01840b8
ffffffff81cc26c0
[ 228.064539] Call Trace:
[ 228.064539] [<
ffffffffa01ab7db>] nfs4_state_shutdown_net+0x18b/0x220
[nfsd]
[ 228.064539] [<
ffffffffa01840b8>] nfsd_shutdown_net+0x38/0x70 [nfsd]
[ 228.064539] [<
ffffffffa018413e>] nfsd_last_thread+0x4e/0x80 [nfsd]
[ 228.064539] [<
ffffffffa00aa1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc]
[ 228.064539] [<
ffffffffa018464b>] nfsd_destroy+0x5b/0x80 [nfsd]
[ 228.064539] [<
ffffffffa0184773>] nfsd+0x103/0x130 [nfsd]
[ 228.064539] [<
ffffffffa0184670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[ 228.064539] [<
ffffffff810a8232>] kthread+0xd2/0xf0
[ 228.064539] [<
ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[ 228.064539] [<
ffffffff816c493c>] ret_from_fork+0x7c/0xb0
[ 228.064539] [<
ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[ 228.064539] Code: 1f 44 00 00 55 48 8b 17 48 89 e5 48 39 d7 74 3b 48
8b 47 08 48 85 c0 75 0e eb 25 66 0f 1f 84 00 00 00 00 00 48 89 d0 48 8b
50 10 <48> 85 d2 75 f4 5d c3 66 90 48 3b 78 08 75 f6 48 8b 10 48 89 c7
Fixes:
ac55fdc408039 (nfsd: move the confirmed and unconfirmed hlists...)
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Mon, 10 Mar 2014 18:17:55 +0000 (14:17 -0400)]
nfsd4: fix setclientid encode size
commit
480efaee085235bb848f1063f959bf144103c342 upstream.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Mon, 10 Mar 2014 04:52:07 +0000 (12:52 +0800)]
nfsd4: fix memory leak in nfsd4_encode_fattr()
commit
18df11d0eacf67bbcd8dda755b568bbbd7264735 upstream.
fh_put() does not free the temporary file handle.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanislav Kinsbursky [Wed, 26 Feb 2014 13:50:01 +0000 (16:50 +0300)]
nfsd: check passed socket's net matches NFSd superblock's one
commit
3064639423c48d6e0eb9ecc27c512a58e38c6c57 upstream.
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:
"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.
This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.
v2: Put socket on exit.
Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Mon, 24 Feb 2014 19:59:47 +0000 (14:59 -0500)]
nfsd: notify_change needs elevated write count
commit
9f67f189939eccaa54f3d2c9cf10788abaf2d584 upstream.
Looks like this bug has been here since these write counts were
introduced, not sure why it was just noticed now.
Thanks also to Jan Kara for pointing out the problem.
Reported-by: Matthew Rahtz <mrahtz@rapitasystems.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Mon, 3 Feb 2014 21:38:47 +0000 (16:38 -0500)]
nfsd4: leave reply buffer space for failed setattr
commit
04819bf6449094e62cebaf5199d85d68d711e667 upstream.
This fixes an ommission from
18032ca062e621e15683cb61c066ef3dc5414a7b
"NFSD: Server implementation of MAC Labeling", which increased the size
of the setattr error reply without increasing COMPOUND_ERR_SLACK_SPACE.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Mon, 3 Feb 2014 21:31:42 +0000 (16:31 -0500)]
nfsd4: fix test_stateid error reply encoding
commit
a11fcce1544df08c723d950ff0edef3adac40405 upstream.
If the entire operation fails then there's nothing to encode.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Tue, 28 Jan 2014 21:05:15 +0000 (16:05 -0500)]
nfsd4: buffer-length check for SUPPATTR_EXCLCREAT
commit
de3997a7eeb9ea286b15879fdf8a95aae065b4f7 upstream.
This was an omission from
8c18f2052e756e7d5dea712fc6e7ed70c00e8a39
"nfsd41: SUPPATTR_EXCLCREAT attribute".
Cc: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Tue, 28 Jan 2014 21:01:04 +0000 (16:01 -0500)]
nfsd4: session needs room for following op to error out
commit
4c69d5855a16f7378648c5733632628fa10431db upstream.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Thu, 3 Apr 2014 19:10:35 +0000 (15:10 -0400)]
nfsd: revert v2 half of "nfsd: don't return high mode bits"
commit
082f31a2169bd639785e45bf252f3d5bce0303c6 upstream.
This reverts the part of commit
6e14b46b91fee8a049b0940333ce13a820beaaa5
that changes NFSv2 behavior.
Mark Lord found that it broke nfs-root for Linux clients, because it
broke NFSv2.
In fact, from RFC 1094:
"Notice that the file type is specified both in the mode bits
and in the file type. This is really a bug in the protocol and
will be fixed in future versions."
So NFSv2 clients really are expected to depend on the high bits of the
mode.
Reported-by: Mark Lord <mlord@pobox.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Wed, 26 Mar 2014 20:24:37 +0000 (13:24 -0700)]
NFSv4: Fix a use-after-free problem in open()
commit
e911b8158ee1def8153849b1641b736026b036e0 upstream.
If we interrupt the nfs4_wait_for_completion_rpc_task() call in
nfs4_run_open_task(), then we don't prevent the RPC call from
completing. So freeing up the opendata->f_attr.mdsthreshold
in the error path in _nfs4_do_open() leads to a use-after-free
when the XDR decoder tries to decode the mdsthreshold information
from the server.
Fixes:
82be417aa37c0 (NFSv4.1 cache mdsthreshold values on OPEN)
Tested-by: Steve Dickson <SteveD@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 18 Mar 2014 08:13:00 +0000 (08:13 +0000)]
iio: cm36651: Fix i2c client leak and possible NULL pointer dereference
commit
d0a588a57c2b0748df8307a0865a1bbbf1624c53 upstream.
During probe the driver allocates dummy I2C devices (i2c_new_dummy())
but they aren't unregistered during driver remove or probe failure.
Additionally driver does not check the return value of i2c_new_dummy().
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later
dereferenced by i2c_smbus_{read,write}_data() functions.
Fix issues by properly checking for i2c_new_dummy() return value and
unregistering I2C devices on driver remove or probe failure.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Beomho Seo [Wed, 3 Dec 2014 00:57:00 +0000 (00:57 +0000)]
iio: cm32181: Fix read integration time function
commit
41c897f8789d0d1039ed873ddcd0caabd5756e0f upstream.
In read integration time function, assign 0 to val.
Because, prevent return inaccurate value when call read integration time.
Cc: Kevin Tsai <ktsai@capellamicro.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Sat, 3 May 2014 15:57:00 +0000 (16:57 +0100)]
iio: adc: at91_adc: Repair broken platform_data support
commit
467a44b0372d8268ce5bd90e58bde7db51c1d476 upstream.
Trying to use the at91_adc driver while not using device tree is ending up in a
kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address
00000004
[...]
[<
c01f3510>] (at91_adc_probe) from [<
c0183828>] (platform_drv_probe+0x18/0x48)
[<
c0183828>] (platform_drv_probe) from [<
c01824a4>] (driver_probe_device+0x100/0x218)
[<
c01824a4>] (driver_probe_device) from [<
c0182648>] (__driver_attach+0x8c/0x90)
[<
c0182648>] (__driver_attach) from [<
c0180de4>] (bus_for_each_dev+0x58/0x88)
[<
c0180de4>] (bus_for_each_dev) from [<
c0181c7c>] (bus_add_driver+0xd4/0x1d4)
[<
c0181c7c>] (bus_add_driver) from [<
c0182c40>] (driver_register+0x78/0xf4)
[<
c0182c40>] (driver_register) from [<
c0008998>] (do_one_initcall+0xe8/0x14c)
[<
c0008998>] (do_one_initcall) from [<
c02f0b50>] (kernel_init_freeable+0xec/0x1b4)
[<
c02f0b50>] (kernel_init_freeable) from [<
c022acdc>] (kernel_init+0x8/0xe4)
[<
c022acdc>] (kernel_init) from [<
c0009670>] (ret_from_fork+0x14/0x24)
This is because the at91_adc_caps structure is mandatory but is not filled when
using platform_data. Correct that by using an id_table. It ensues that the
driver will not match "at91_adc" anymore but it was crashing anyway.
Fixes:
c46016665fff (iio: at91: ADC start-up time calculation changed since at91sam9x5)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alec Berg [Wed, 19 Mar 2014 18:50:00 +0000 (18:50 +0000)]
iio: querying buffer scan_mask should return 0/1
commit
2076a20fc1a06f7b0333c62a2bb4eeeac7ed1bcb upstream.
Ensure that querying the IIO buffer scan_mask returns a value of
0 or 1. Currently querying the scan mask has the value returned
by test_bit(), which returns either true or false. For some
architectures test_bit() may return -1 for true, which will appear
to return an error when returning from iio_scan_mask_query().
Additionally, it's important for the sysfs interface to consistently
return the same thing when querying the scan_mask.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Mon, 14 Apr 2014 17:48:47 +0000 (13:48 -0400)]
USB: fix crash during hotplug of PCI USB controller card
commit
a2ff864b53eac9a0e9b05bfe9d1781ccd6c2af71 upstream.
The code in hcd-pci.c that matches up EHCI controllers with their
companion UHCI or OHCI controllers assumes that the private drvdata
fields don't get set too early. However, it turns out that this field
gets set by usb_create_hcd(), before hcd-pci expects it, and this can
result in a crash when two controllers are probed in parallel (as can
happen when a new controller card is hotplugged).
The companions_rwsem lock was supposed to prevent this sort of thing,
but usb_create_hcd() is called outside the scope of the rwsem.
A simple solution is to check that the root-hub pointer has been
initialized as well as the drvdata field. This doesn't happen until
usb_add_hcd() is called; that call and the check are both protected by
the rwsem.
This patch should be applied to stable kernels from 3.10 onward.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefani Seibold <stefani@seibold.net>
Tested-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Jacques Hiblot [Fri, 14 Feb 2014 18:46:15 +0000 (11:46 -0700)]
PCI: mvebu: Fix potential issue in range parsing
commit
4f4bde1df33bde076f53325bdf2c6430cf85e1bb upstream.
The second parameter of of_read_number() is not the index, but a size. As
it happens, in this case it may work just fine because of the conversion to
u32 and the favorable endianness on this architecture.
Fixes:
11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Vasut [Wed, 19 Feb 2014 20:22:18 +0000 (13:22 -0700)]
PCI: imx6: Wait for retraining
commit
f95d3ae771916c8c7024fecfb6c420e5dfeced05 upstream.
This patch handles the case where the PCIe link is up and running, yet
drops into the LTSSM training mode. The link spends short time in the LTSSM
training mode, but the current code can misinterpret it as the link being
stalled. Waiting for the LTSSM training to complete fixes the issue.
Quoting Sascha:
This is broken since commit
7f9f40c01cce ('PCI: imx6: Report "link up"
only after link training completes').
The designware driver changes the PORT_LOGIC_SPEED_CHANGE bit in
dw_pcie_host_init() which causes the link to be retrained. During the
next call to dw_pcie_rd_conf() the link is then reported being down and
the function returns PCIBIOS_DEVICE_NOT_FOUND resulting in nonfunctioning
PCIe.
Fixes:
7f9f40c01cce (PCI: imx6: Report "link up" only after link training completes)
Tested-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Charles Keepax [Tue, 18 Mar 2014 10:49:17 +0000 (10:49 +0000)]
regulator: arizona-ldo1: Correct default regulator init_data
commit
a35ff2861690eaf9dbb38fa744a8a9e6f4ebfd61 upstream.
Both 5102 and 8997 have the regulator capable of supplying 1.8V, and the
voltage step from the 5110 regulator is different from what is specified
in the default description. This patch updates the default regulator
description to match 5110 and selects the 1.8V capable description for
8997.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin [Sun, 16 Mar 2014 22:31:54 +0000 (15:31 -0700)]
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
commit
b3b42ac2cbae1f3cecbb6229964a4d48af31d382 upstream.
The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer. We have
a software workaround for that ("espfix") for the 32-bit kernel, but
it relies on a nonzero stack segment base which is not available in
32-bit mode.
Since 16-bit support is somewhat crippled anyway on a 64-bit kernel
(no V86 mode), and most (if not quite all) 64-bit processors support
virtualization for the users who really need it, simply reject
attempts at creating a 16-bit segment when running on top of a 64-bit
kernel.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Mladek [Mon, 24 Feb 2014 16:12:20 +0000 (17:12 +0100)]
ftrace/x86: One more missing sync after fixup of function modification failure
commit
12729f14d8357fb845d75155228b21e76360272d upstream.
If a failure occurs while modifying ftrace function, it bails out and will
remove the tracepoints to be back to what the code originally was.
There is missing the final sync run across the CPUs after the fix up is done
and before the ftrace int3 handler flag is reset.
Here's the description of the problem:
CPU0 CPU1
---- ----
remove_breakpoint();
modifying_ftrace_code = 0;
[still sees breakpoint]
<takes trap>
[sees modifying_ftrace_code as zero]
[no breakpoint handler]
[goto failed case]
[trap exception - kernel breakpoint, no
handler]
BUG()
Link: http://lkml.kernel.org/r/1393258342-29978-2-git-send-email-pmladek@suse.cz
Fixes:
8a4d0a687a5 "ftrace: Use breakpoint method to update ftrace caller"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fenghua Yu [Thu, 20 Feb 2014 21:24:51 +0000 (13:24 -0800)]
x86, AVX-512: Enable AVX-512 States Context Switch
commit
c2bc11f10a39527cd1bb252097b5525664560956 upstream.
This patch enables Opmask, ZMM_Hi256, and Hi16_ZMM AVX-512 states for
xstate context switch.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1392931491-33237-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fenghua Yu [Thu, 20 Feb 2014 21:24:50 +0000 (13:24 -0800)]
x86, AVX-512: AVX-512 Feature Detection
commit
8e5780fdeef7dc490b3f0b3a62704593721fa4f3 upstream.
AVX-512 is an extention of AVX2. Its spec can be found at:
http://download-software.intel.com/sites/default/files/managed/71/2e/319433-017.pdf
This patch detects AVX-512 features by CPUID.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1392931491-33237-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Beulich [Thu, 27 Feb 2014 08:47:02 +0000 (08:47 +0000)]
x86, hash: Fix build failure with older binutils
commit
06325190bd577e11429444d54f454b9d13f560c9 upstream.
Just like for other ISA extension instruction uses we should check
whether the assembler actually supports them. The fallback here simply
is to encode an instruction with fixed operands (%eax and %ecx).
[ hpa: tagging for -stable as a build fix ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/530F0996020000780011FBE7@nat28.tlf.novell.com
Cc: Francesco Fusco <ffusco@redhat.com>
Cc: Thomas Graf <tgraf@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Wed, 9 Apr 2014 16:12:58 +0000 (11:12 -0500)]
staging: r8188eu: Calling rtw_get_stainfo() with a NULL sta_addr will return NULL
commit
9452bf560273e4de2395ffdd79024debfb0c1290 upstream.
This makes the follow-on check for psta != NULL pointless and makes
the whole exercise rather pointless. This is another case of why
blindly zero-initializing variables when they are declared is bad.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 28 Mar 2014 16:20:58 +0000 (09:20 -0700)]
staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data
commit
2704f807f9498054b8153002bafa3e818079e9a5 upstream.
In usbdux_ao_cmd(), the channels for the command are transfered from the
cmd->chanlist and stored in the private data 'ao_chanlist'. The channel
numbers are bit-shifted when stored so that they become the "command"
that is transfered to the device. The channel to command conversion
results in the 'ao_chanlist' having these values for the channels:
channel 0 -> ao_chanlist = 0x00
channel 1 -> ao_chanlist = 0x40
channel 2 -> ao_chanlist = 0x80
channel 3 -> ao_chanlist = 0xc0
The problem is, the usbduxsub_ao_isoc_irq() function uses the 'chan' value
from 'ao_chanlist' to access the 'ao_readback' array in the private data.
So instead of accessing the array as 0, 1, 2, 3, it accesses it as 0x00,
0x40, 0x80, 0xc0.
Fix this by storing the raw channel number in 'ao_chanlist' and doing the
bit-shift when creating the command.
Fixes:
a998a3db530bff80 "staging: comedi: usbdux: cleanup the private data 'outBuffer'"
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Wed, 16 Apr 2014 19:49:33 +0000 (14:49 -0500)]
staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0
commit
f764cd68d9036498f08fe8834deb6a367b5c2542 upstream.
Zero-initializing ether_type masked that the ether type would never be
obtained for 8021x packets and the comparison against eapol_type
would always fail.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Himangi Saraogi [Tue, 4 Mar 2014 23:29:57 +0000 (04:59 +0530)]
staging:serqt_usb2: Fix sparse warning restricted __le16 degrades to integer
commit
abe5d64d1a74195a44cd14624f8178b9f48b7cc7 upstream.
This patch fixes the following sparse warning :
drivers/staging/serqt_usb2/serqt_usb2.c:727:40: warning: restricted __le16 degrades to integer
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Fries [Thu, 16 Jan 2014 04:29:12 +0000 (22:29 -0600)]
w1: fix w1_send_slave dropping a slave id
commit
6b355b33a64fd6d8ead2b838ec16fb9b551f71e8 upstream.
Previous logic,
if (avail > 8) {
store slave;
return;
}
send data; clear;
The logic error is, if there isn't space send the buffer and clear,
but the slave wasn't added to the now empty buffer loosing that slave
id. It also should have been "if (avail >= 8)" because when it is 8,
there is space.
Instead, if there isn't space send and clear the buffer, then there is
always space for the slave id.
Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Novotny [Mon, 10 Mar 2014 18:12:50 +0000 (19:12 +0100)]
mfd: twl-core: Fix accessibility of some twl4030 audio registers
commit
56816b700c8c773270f3aaf4c92be53e359a03fd upstream.
There are some unused registers in twl4030 at I2C address 0x49 and function
twl4030_49_nop_reg() is used to check accessibility of that registers. These
registers are written in decimal format but the values are correct in
hexadecimal format. (It can be checked few lines above the patched code -
these registers are marked as unused there.)
As a consequence three registers of audio submodule are treated as
inaccessible (preamplifier carkit right and both handsfree registers).
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Thu, 20 Mar 2014 15:12:28 +0000 (08:12 -0700)]
mfd: kempld-core: Fix potential hang-up during boot
commit
204747c970c0d568721c76ab8a57dde0e5dcf0d5 upstream.
On PXT and COMe-cPC2 boards it is observed that the hardware
mutex is acquired but not being released during initialization.
This can result in a hang-up during boot if the driver is built
into the kernel.
Releasing the mutex twice if it was acquired fixes the problem.
Subsequent request/release cycles work as expected, so the fix is
only needed during initialization.
Reviewed-by: Michael Brunner <michael.brunner@kontron.com>
Tested-by: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Wed, 12 Mar 2014 15:50:44 +0000 (16:50 +0100)]
mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
commit
483e2dfdbc94751430e41db9973985f5b054d322 upstream.
Fixes:
4aab3fadad32 ("mfd: tps65910: Move interrupt implementation code to mfd file")
tps65910_irq_init() sets 'tps65910->chip_irq' before calling
regmap_add_irq_chip(). If the regmap_add_irq_chip() call fails in
memory allocation of regmap_irq_chip_data members then:
1. The 'tps65910->chip_irq' will still hold some value
2. 'tps65910->irq_data' will be pointing to already freed memory
(because regmap_add_irq_chip() will free it on error)
This results in invalid memory access during driver remove because the
tps65910_irq_exit() tests whether 'tps65910->chip_irq' is not zero.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:34 +0000 (11:03 +0100)]
mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy error
commit
97dc4ed3fa377ec91bb60ba98b70d645c2099384 upstream.
During probe the driver allocates dummy I2C devices for RTC, haptic and
MUIC with i2c_new_dummy() but it does not check the return value of this
calls.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the
probe for main MFD driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:35 +0000 (11:03 +0100)]
mfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy error
commit
ed26f87b9f71693a1d1ee85f5e6209601505080f upstream.
During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC device, fail also the probe for
main MFD driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:33 +0000 (11:03 +0100)]
mfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy error
commit
96cf3dedc491d2f1f66cc26217f2b06b0c7b6797 upstream.
During probe the driver allocates dummy I2C devices for RTC and ADC
with i2c_new_dummy() but it does not check the return value of this
calls.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe
for main MFD driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:32 +0000 (11:03 +0100)]
mfd: max77693: Fix possible NULL pointer dereference on i2c_new_dummy error
commit
ad09dd6a1f5d6244bd89314015af506ba7f9810a upstream.
During probe the driver allocates dummy I2C devices for MUIC and haptic
with i2c_new_dummy() but it does not check the return value of this
calls.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by devm_regmap_init_i2c() and i2c_unregister_device().
If i2c_new_dummy() fails for MUIC or haptic devices, fail also the probe
for main MFD driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:31 +0000 (11:03 +0100)]
mfd: max77686: Fix possible NULL pointer dereference on i2c_new_dummy error
commit
b9e183a1d495cd65412abe0f9df19b151716bfe7 upstream.
During probe the driver allocates dummy I2C device for RTC with
i2c_new_dummy() but it does not check the return value of this call.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>