Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (35 commits)
  [S390] time: remove unused code
  [S390] zcore: Add prefix registers to dump header
  [S390] correct vdso version string
  [S390] add support for compressed kernels
  [S390] Define new s390 ELF note sections in elf.h
  [S390] codepage conversion of kernel parameter line
  [S390] seq_file: convert drivers/s390/
  [S390] add z9-ec/z10 instruction to kernel disassembler
  [S390] dasd: correct offline processing
  [S390] dasd: fix refcounting.
  [S390] dasd: fix online/offline race
  [S390] use kprobes_built_in() in mm/fault code
  [S390] bug: use relative pointers in bug table entries
  [S390] Cleanup struct _lowcore usage and defines.
  [S390] free_initmem: reduce code duplication
  [S390] Replace ENOTSUPP usage with EOPNOTSUPP
  [S390] spinlock: check virtual cpu running status
  [S390] sysinfo: fix SYSIB 3,2,2 structure
  [S390] add MACHINE_IS_LPAR flag
  [S390] qdio: optimize cache line usage of struct qdio_irq
  ...

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
  MIPS: Alchemy: defconfig updates
  MIPS: Alchemy: Fix Au1100 ethernet build failure
  MIPS: Alchemy: Repair db1500/bosporus builds
  MIPS: ARC: Cleanup unused definitions from sgialib.h
  MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
  MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
  MIPS: Cobalt: Fix theoretical port aliasing issue
  MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
  MIPS: Crazy spinlock speed test.
  MIPS: Optimize spinlocks.
  MIPS: Alchemy: devboard PM needs to save CPLD registers.
  MIPS: PowerTV: Eliminate duplicate opcode definition macros
  MIPS: Lemote 2F: Move printks out of port_access_lock.
  MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
  MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
  MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
  MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
  MIPS: Loongson: Remove pointless sample_lock from oprofile code.
  MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
  MIPS: i8259: Convert IRQ controller lock to raw spinlock.
  ...

Merge git://git./linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
  pcmcia: validate late-added resources
  pcmcia: allow for extension of resource interval
  pcmcia: remove useless msleep in ds.c
  pcmcia: use read_cis_mem return value
  pcmcia: handle error in serial_cs config calls
  pcmcia: add locking to pcmcia_{read,write}_cis_mem
  pcmcia: avoid prod_id memleak
  pcmcia: avoid sysfs-related lockup for cardbus
  pcmcia: use state machine for extended requery
  pcmcia: delay re-scanning and re-querying of PCMCIA bus
  pcmcia: use pccardd to handle eject, insert, suspend and resume requests
  pcmcia: use ops_mutex for rsrc_{mgr,nonstatic} locking
  pcmcia: use mutex for dynid lock
  pcmcia: assert locking to struct pcmcia_device
  pcmcia: add locking documentation
  pcmcia: simplify locking
  pcmcia: add locking to struct pcmcia_socket->pcmcia_state()
  pcmcia: protect s->device_count
  pcmcia: properly lock skt->irq, skt->irq_mask
  pcmcia: lock ops->set_socket
  ...

Merge branch 'next' of git://git./linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits)
  powerpc: Fix lwsync feature fixup vs. modules on 64-bit
  powerpc: Convert pmc_owner_lock to raw_spinlock
  powerpc: Convert die.lock to raw_spinlock
  powerpc: Convert tlbivax_lock to raw_spinlock
  powerpc: Convert mpic locks to raw_spinlock
  powerpc: Convert pmac_pic_lock to raw_spinlock
  powerpc: Convert big_irq_lock to raw_spinlock
  powerpc: Convert feature_lock to raw_spinlock
  powerpc: Convert i8259_lock to raw_spinlock
  powerpc: Convert beat_htab_lock to raw_spinlock
  powerpc: Convert confirm_error_lock to raw_spinlock
  powerpc: Convert ipic_lock to raw_spinlock
  powerpc: Convert native_tlbie_lock to raw_spinlock
  powerpc: Convert beatic_irq_mask_lock to raw_spinlock
  powerpc: Convert nv_lock to raw_spinlock
  powerpc: Convert context_lock to raw_spinlock
  powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards
  powerpc/86xx: Enable VME driver on the GE SBC610
  powerpc/86xx: Enable VME driver on the GE PPC9A
  powerpc/86xx: Add MSI section to GE PPC9A DTS
  ...

MIPS: Alchemy: defconfig updates

Updated, leaner defconfig for the alchemy development boards.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1005/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Fix Au1100 ethernet build failure

Don't define platform info for second mac on au1100 (which only has a
single mac).

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1004/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Repair db1500/bosporus builds

A few hunks somehow ended up outside their #ifdef/endif blocks,
leading to -Werror-induces build failures.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1003/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ARC: Cleanup unused definitions from sgialib.h

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/979/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses

The GT-64111 PCI host bridge has no address translation mechanism, so
it can't generate legacy port accesses.  This quirk fixes legacy device
port resources to contain the bus addresses actually generated by the
GT-64111.

I think this is the approach Ben Herrenschmidt suggested long ago:
    http://marc.info/?l=linux-kernel&m=119733290624544&w=2

This allows us to remove the IORESOURCE_PCI_FIXED hack from
pcibios_fixup_device_resources(), which converts bus addresses to CPU
addresses.  IORESOURCE_PCI_FIXED denotes resources that can't be moved;
it has nothing to do with converting bus to CPU addresses.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-mips@linux-mips.org
Tested-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/998/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: use 36bit addresses for PCMCIA resources.

On Alchemy the PCMCIA area lies at the end of the chips 36bit system bus
area.  Currently, addresses at the far end of the 32bit area are assumed
to belong to the PCMCIA area and fixed up to the real 36bit address before
being passed to ioremap().

A previous commit enabled 64 bit physical size for the resource datatype on
Alchemy and this allows to use the correct 36bit addresses when registering
the PCMCIA sockets.

This patch removes the 32-to-36bit address fixup and registers the Alchemy
demo board pcmcia socket with the correct 36bit physical addresses.

Tested on DB1200, with a CF card (ide-cs driver) and a 3c589 PCMCIA ethernet
card.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/994/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Cobalt: Fix theoretical port aliasing issue

Because the VIA SuperIO chip only decodes 24 bits of address space but port
address space currently being configured as 32MB there is the theoretical
possibility of aliases within the I/O port address range.

The complicated solution is to reserve all address range that potencially
could cause such aliases.  But with the PCI spec limiting port allocations
for devices to a maximum of 256 bytes 16MB of port address space already is
way more than one would ever expect to be used so we just reduce the port
space to 16MB.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
To: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: linux-mips@linux-mips.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Patchwork: http://patchwork.linux-mips.org/patch/995/

MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)

ALIGN(x, bytes) expands to __ALIGN_MASK(x, bytes - 1), so use the one
that is most clear.

Signed-off-by: Matt Turner <mattst88@gmail.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/999/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Crazy spinlock speed test.

This is just a test program for raw_spinlocks.  The main reason I
wrote it is to validate my spinlock changes that I sent in a previous
patch.

To use it enable CONFIG_DEBUG_FS and CONFIG_SPINLOCK_TEST then at run
time do:

# mount -t debugfs none /sys/kernel/debug/
# cat /sys/kernel/debug/mips/spin_single
# cat /sys/kernel/debug/mips/spin_multi

On my 600MHz octeon cn5860 (16 CPUs) I get

spin_single spin_multi
base 106885 247941
spinlock_patch 75194 219465

This shows that for uncontended locks the spinlock patch gives 41%
improvement and for contended locks 12% improvement (1/time).

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/969/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Optimize spinlocks.

The current locking mechanism uses a ll/sc sequence to release a
spinlock.  This is slower than a wmb() followed by a store to unlock.

The branching forward to .subsection 2 on sc failure slows down the
contended case.  So we get rid of that part too.

Since we are now working on naturally aligned u16 values, we can get
rid of a masking operation as the LHU already does the right thing.
The ANDI are reversed for better scheduling on multi-issue CPUs

On a 12 CPU 750MHz Octeon cn5750 this patch improves ipv4 UDP packet
forwarding rates from 3.58*10^6 PPS to 3.99*10^6 PPS, or about 11%.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/937/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: devboard PM needs to save CPLD registers.

Save/restore CPLD registers when doing suspend-to-ram; this fixes issues
with harddisk and ethernet not working correctly when resuming on DB1200.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/986/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PowerTV: Eliminate duplicate opcode definition macros

Change to different macros for assembler macros since the old names in
powertv_setup.c were co-opted for use in asm/asm.h. This broken the
build for the powertv platform. This patch introduces new macros based on
the new macros in asm.h to take the place of the old macro values.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Lemote 2F: Move printks out of port_access_lock.

No point in protecting them and printks are sloow.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/973/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/972/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Remove pointless sample_lock from oprofile code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: i8259: Convert IRQ controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP27: Convert nmi_lock lock to arch spinlock;

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP27: Remove code obfuscation by enter_panic_mode().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: GT641xx: Convert timer lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Simplify DMA channel allocation code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>

MIPS: Yosemite: Convert SMP startup lock to arch spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Remove time_lock.

The sole user is au1xxx_calc_clock() which is only used in early bootup
where the is no paralellism thus no race condition to protect against.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>

MIPS: DEC: Convert KN01 lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BCM63xx: Convert timer locks to raw spinlocks.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PowerTV: Convert IRQ controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: David VomLehn <dvomlehn@cisco.com>

MIPS: Malta: Convert IRQ controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: SB1480: Convert IRQ controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: SB1250: Convert IRQ controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: GT641xx: Convert IRQ controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Jazz: Convert irq controller lock to raw spinlock.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Make various locks static.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: Octeon: Remove /proc/octeon_ethernet_stats

This file shouldn't be in /proc, so we remove it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/970/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: Octeon: Reformat a bunch of comments.

Many of the comments didn't follow kerneldoc guidlines.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/971/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: Octeon:  Free transmit SKBs in a timely manner

If we wait for the once-per-second cleanup to free transmit SKBs,
sockets with small transmit buffer sizes might spend most of their
time blocked waiting for the cleanup.

Normally we do a cleanup for each transmitted packet.  We add a
watchdog type timer so that we also schedule a timeout for 150uS after
a packet is transmitted.  The watchdog is reset for each transmitted
packet, so for high packet rates, it never expires.  At these high
rates, the cleanups are done for each packet so the extra watchdog
initiated cleanups are neither needed nor triggered.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/968/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This version has spelling and comment changes based on feedback from
Eric Dumazet.

MIPS: Octeon: Do proper acknowledgment of CIU timer interrupts.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/967/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: Octeon:  Run phy bus accesses on a workqueue.

When directly accessing a phy, we must acquire the mdio bus lock.  To
do that we cannot be in interrupt context, so we need to move these
operations to a workqueue.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/965/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: octeon: remove unneeded includes

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/964/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Use generic ucontext.h

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/959/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Use generic serial.h

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/960/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Use generic parport.h

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Use generic current.h

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/957/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Enable Read Inhibit/eXecute Inhibit for Octeon+ CPUs

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Give Octeon+ CPUs their own cputype.

This allows us to treat them differently at runtime.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/951/
Patchwork: http://patchwork.linux-mips.org/patch/987/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Implement Read Inhibit/eXecute Inhibit

The SmartMIPS ASE specifies how Read Inhibit (RI) and eXecute Inhibit
(XI) bits in the page tables work.  The upper two bits of EntryLo{0,1}
are RI and XI when the feature is enabled in the PageGrain register.
SmartMIPS only covers 32-bit systems.  Cavium Octeon+ extends this to
64-bit systems by continuing to place the RI and XI bits in the top of
EntryLo even when EntryLo is 64-bits wide.

Because we need to carry the RI and XI bits in the PTE, the layout of
the PTE is changed.  There is a two instruction overhead in the TLB
refill hot path to get the EntryLo bits into the proper position.
Also the TLB load exception has to probe the TLB to check if RI or XI
caused the exception.

Also of note is that the layout of the PTE bits is done at compile and
runtime rather than statically.  In the 32-bit case this allows for
the same number of PFN bits as before the patch as the _PAGE_HUGE is
not supported in 32-bit kernels (we have _PAGE_NO_EXEC and
_PAGE_NO_READ instead of _PAGE_READ and _PAGE_HUGE).

The patch is tested on Cavium Octeon+, but should also work on 32-bit
systems with the Smart-MIPS ASE.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/952/
Patchwork: http://patchwork.linux-mips.org/patch/956/
Patchwork: http://patchwork.linux-mips.org/patch/962/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Add TLBR and ROTR to uasm.

The soon to follow Read Inhibit/eXecute Inhibit patch needs TLBR and
ROTR support in uasm.  We also add a UASM_i_ROTR macro.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Add accessor functions and bit definitions for c0_PageGrain

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/950/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Use 64-bit stores to c0_entrylo on 64-bit kernels.

64-bit CPUs have 64-bit c0_entrylo{0,1} registers.  We should use the
64-bit dmtc0 instruction to set them.  This becomes important if we
want to set the RI and XI bits present in some processors.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/954/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Remove trailing space in messages

Signed-off-by: Frans Pop <elendil@planet.nl>
To: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/946/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Make the debugging of compressed kernel configurable

This patch adds a new DEBUG_ZBOOT option to allow the users to enable it
to debug the compressed kernel support for a new board and this optoin
should be disabled to reduce the kernel image size and speed up the
kernel booting procedure when the compressed kernel support is stable.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/918/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Remove #if 0 r4k_update_mmu_cache_hwbug

The function is #if 0ed out.  There are no other occurrences of its
name in the tree.  It is safe to remove.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/936/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: TXx9: Remove forced serial console setting

It is not always used, even if it is available.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/933/
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: Make ar7_register_devices much more durable

[Ralf: Fixed up the rejects and changed all the new printk(KERN_...); to
pr_xxx() as suggested by Wu.]

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/920/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: Fix USB slave mem range typo

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/919/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: Whitespace hacking

[Ralf: Fixed up reject and Wu's complaints about comment style.]

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/921/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Use strlcat() for the command line arguments

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Remove prom_getcmdline()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/927/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Remove forced command line setting

It is not always used, even if it is available.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/893/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Set __elf_platform for Octeon.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/892/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Allow the auxv's elf_platform entry to be set.

The userspace runtime linker uses the elf_platform to find the libraries
optimized for the current CPU archecture variant.  First we need to allow it
to be set to something other than NULL.  Follow-on patches will set some
values for specific CPUs.

GLIBC already does the right thing.  The kernel just needs to supply good
data.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/891/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MMC: AU1xMMC: Allow platforms to disable host capabilities

Although the hardware supports a 4/8bit SD interface and the driver
unconditionally advertises all hardware caps to the MMC core, not all
datalines may actually be wired up.  This patch introduces another
field to au1xmmc platform data allowing platforms to disable certain
advanced host controller features.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: linux-mmc@vger.kernel.org
CC: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Deal with larger physical offsets

AR7 has a larger physical offset than other MIPS based systems and therefore
needs to setup its handlers beyond the usual KSEG0 range. When running the
kernel in mapped mode this modification is also required. Remove function
comment which is now incorrect.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/889/
Patchwork: http://patchwork.linux-mips.org/patch/932/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Annotate set_except_vector with __init

All call sites of set_except_vector are already annotated with __init, so
annotate that one too.

Signed-off-by: Regards, Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
To: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Move arch/mips/mm/uasm.h to arch/mips/include/asm/uasm.h

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
To: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/887/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX8550: Remove unnecessary export prom_getcmdline()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/886/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX833x: Remove unused prom_getcmdline()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Support 36-bit iomem on 32-bit Au1x00

I believe these changes are needed on Alchemy SoCs in order to
use iomem above 4G with the usual platform_device machinery:

- Set CONFIG_ARCH_PHYS_ADDR_T_64BIT to make resource_size_t 64-bit.
- Increase IOMEM_RESOURCE_END so that platforms can register resources.

To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/814/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Cleanup the halt and poweroff action

In the old source code, I have let halt and poweroff do the same action,
but in reality, they have different meanings.

As the manpage of shutdown shows:

-r     Reboot after shutdown.
-H     Halt action is to halt or drop into boot monitor on systems that support it.
-P     Halt action is to turn off the power.

and in the real world, some machines(e.g. NAS) did not provide a power
button and the shutdown works as reset, so, we need to provide a
mechanism to let the users turn off the power safely without breaking
the system, such a mechanism is "halt", which only put the system into a
dead loop or a power-save mode and print some information to the screen
to tell the users to turn off the power safely.

$ shutdown -hH now /* loongson_halt, not turn off the power */
$ shutdown -hP now /* loongson_poweroff, work as poweroff */

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Tested-by: Liu Shiwei <liushiwei@gmail.com>
Cc: Liu Shiwei <liushiwei@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Simplify the weak annotation with __weak

Found by

$ find arch/mips/ -name "*.c" | xargs -i grep -H weak {} | grep -v __weak

[Ralf: Made this bulletproof by including <linux/compiler.h>]

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/874/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: debug output for compressed kernels

Hook up the compressed debug output for all Alchemy systems supported
by current kernel codebase.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/879/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: Implement clock API

This patch makes the ar7 clock code implement the Linux clk API. Drivers
using the various clocks available in the SoC are updated accordingly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
To: linux-mips@linux-mips.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Patchwork: http://patchwork.linux-mips.org/patch/881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: Implement gpiolib

This patch implements gpiolib for the AR7 SoC.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/816/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: msp71xx: remove unused prom_getcmdline()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/868/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Cleanup the Makefile of compressed kernel support

This patch removes a useless "\" (line break) and tunes the format of a
long line.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/869/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: replace prom_getcmdline() to arcs_cmdline[]

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: AR7: use strlcat() for the command line arguments

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/871/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Nuke trailing blank lines

Recent git versions now warn about those and they've always been a bit of
an annoyance.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Cleanup switches with cases that can be merged

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
To: linux-mips@linux-mips.org
To: Andrew Morton <akpm@linux-foundation.org>
To: LKML <linux-kernel@vger.kernel.org>
Patchwork: http://patchwork.linux-mips.org/patch/860/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Decode c0_config4 for large TLBs.

For processors that have more than 64 TLBs, we need to decode both
config1 and config4 to determine the total number TLBs.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Remove probe_tlb().

The function probe_tlb() only does anything for processors that are
not PRID_COMP_LEGACY.  This is precisely the set of processors for
which decode_configs() is called to do identical tlbsize probing
calculations.  Therefore probe_tlb() is completely redundant and may
be removed.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/865/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: add readl/write_be accessors

MIPS currently lacks the readl_be and writel_be accessors
which are required by BCM63xx for OHCI and EHCI support.
Let's define them globally for MIPS. This also fixes the
compilation of the bcm63xx defconfig against USB.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/793/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Lemote-2F: update defconfig

Changes:

  o Serial port related configuration
    Disable EARLY_PRINTK, CONFIG_SYS_SUPPORTS_ZBOOT_UART16550
    Enable the serial port support as module.
  o PM related support
    Enable CPUFreq as module, use the external timer(MFGPT) instead of
    r4k timer.
    Enable Suspend support
    Enable Run Time PM support
  o Enable SM7XX Video Driver
    Disable the buggy 2d acceleration
  o Enable CONFIG_OPROFILE as module
  o Use GZIP instead of LZMA, which need less decompression time
  o Enable more USB devices support
  o Enable initrd support(needed by gNewsense)
  o Enable more crypto support

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/830/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Change the Email address of Wu Zhangjin

Currently wuzj@lemote.com is not usable; change it to wuzhangjin@gmail.com.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/829/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Fixup mem.c indentation

Replace whitespace by tabs.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/828/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: arch/mips/Makefile: Add missing whitespace

This patch add missing whitespace after every "+=" in the loongson
related part of arch/mips/Makefile.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/827/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Cleanup of the environment variables

Changes:

o Move bus_clock into prom_init_env()
o Initialize the cpu_clock_freq to the default values for the
correspoding processor revisions if no such environment variable
passed by BIOS/Bootloader.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/826/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Move prom_argc and prom_argv into prom_init_cmdline()

prom_argc and prom_argv are only used by prom_init_cmdline(), move them
into the function.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/825/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Remove the serial port output of compressed kernel support

The compressed kernel support on loongson family machines is stable now,
so, remove the debug information via using SYS_SUPPORTS_ZBOOT instead of
SYS_SUPPORTS_ZBOOT_UART16550. This may reduce the image size and speedup
the booting.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/824/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Convert loongson_halt() to use unreachable()

Use the new unreachable() macro instead of while(1);

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/823/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Lemote-2F: USB: Not Emulate Non-Posted Writes

Without this patch, when copying large amounts of data between the USB
storage devices and the hard disk, the USB device will disconnect
regularly.

Signed-off-by: Hu Hongbing <huhb@lemote.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Patchwork: http://patchwork.linux-mips.org/patch/822/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Lemote-2F: Get the machine type from PMON_VER

Lemote have used the PMON_VER strings to indicate the loongson-2f
machine series:

  PMON_VER=LM8089 Lemote 8.9'' netbook
           LM8101 Lemote 10.1'' netbook
  (The above two netbooks have the same kernel support)
         LM6XXX Lemote FuLoong(2F) box series
         LM9XXX Lemote LynLoong PC series

Before the machtype is supported by the PMON, we can get the machine
type from the PMON_VER for these machines, this will help the users a
lot.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: zhangfx@lemote.com
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/821/
Patchwork: http://patchwork.linux-mips.org/patch/908/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: Octeon Ethernet: Use constants from in.h

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/837/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Staging: Octeon Ethernet: Enable scatter-gather.

Octeon ethernet hardware can handle NETIF_F_SG, so we enable it.

A gather list of up to six fragments will fit in the SKB's CB
structure, so no extra memory is required.  If a SKB has more than six
fragments, we must linearize it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>