staging: comedi: ni_daq_700: remove a couple unused defines

These defines are not referenced in the driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: remove the CALLBACK_* code

This driver was originally copied from the 8255 driver. The 8255
uses a callback function to handle the io operations to the device.
In this driver, the callback adds unneeded complexity.

The CALLBACK_ARG for this driver is always 'dev->iobase' and the
CALLBACK_FUNC is always 'subdev_700_cb'.

The callback function is also overly complex for this driver.
It takes a 'dir' parameter to determine if the io is a write or
read, a 'port' parameter that is not used, a 'data' parameter
that is only used for writes, and an 'arg' which is the iobase
of the device.

Unwind all of it and just put the outb()/inb() call in the code
where needed.

This allows getting rid of the private data completely. Refactor
the code based on it's removal.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: remove unused private data variable

The 'have_irq' variable is not needed since this driver doesn't
use interrupts. Remove it.

The kfree(s->private) needs to remain to free the memory allocated
in subdev_700_init().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: remove thisboard macro

The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable.
Replace the macro with local variables and use the comedi_board()
helper to get the pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: move the boardinfo variable

For aesthetic reasons, move the boardinfo declaration down so it's
next to the comedi_driver. That's the only place in the driver
where it's referenced directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: Remove bustype variable from the boardinfo

This driver is only used for pcmcia type devices. There is no need for
the 'bustype' check. Remove the variable from the boardinfo and refactor
the code based on it's removal.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: Remove unneeded variables from the boardinfo

The 'device_id' and 'have_dio' variables in the boardinfo struct are
initialized but not referenced in the driver. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: Remove unused variables from the boardinfo

The 'read_byte' and 'write_byte' function pointers in the boardinfo
struct are not referenced in the driver. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: Remove a "do nothing" function stub

The function do_config() doesn't do anything. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: Remove the unused private data struct

The private data struct in this driver is not used for anything.
Remove the struct definition and the alloc_private() call.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: Move the comedi_driver variable

Move the comedi_driver variable to remove the need for the
forward declarations. Add some whitespace to the declaration
for aesthetic reasons.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: refactor the pcmcia support code

Refactor the pcmcia support code to remove the need for the
forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: remove some useless comments

Remove some useless comments and whitespace.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: cleanup to the pcmcia_driver declaration

For aesthetic reasons, add some whitespace to the declaration
of the pcmcia_driver and reorder it a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: change driver registration order

As done with the other comedi driver types, register the
comedi_driver first then the pcmcia_driver. Also, make
sure the pcmcia_driver registration succeeds and unregister
the comedi_driver it it fails.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: consolidate the init and exit functions

The register/unregister of the pcmcia driver is done is separate
functions that are called by the module_{init,exit} routines.
Simplify the code a bit by moving the register/unregister into
the module_{init,exit} routines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: add the module_{init, exit} declarations

The init and exit functions for this module were being declared
as global symbols. Add the module_{init,exit} declarations and
make the functions static. Also, rename the functions so they
have namespace associated with the module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: move the MODULE_* stuff to the EOF

Move the MODULE_* declarations to the end of the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: remove exported symbols

This driver exports a number of functions with EXPORT_SYMBOL()
but nothing actually uses them. They also are not declared in
any header for use outside this module.

As stated in the comments, this driver was based on the 8255
driver so these exports are most likely the result of cut-and-
paste from the 8255 driver.

Remove all the EXPORT_SYMBOL() lines. If the exported function
is not used in the driver, remove the entire function as well.
If the function is used, make it static.

Also, make the dio700_cs_driver variable static since it's only
referenced in this file.

This quiets the following sparse warnings:

warning: symbol 'subdev_700_interrupt' was not declared. Should it be static?
warning: symbol 'subdev_700_init' was not declared. Should it be static?
warning: symbol 'subdev_700_init_irq' was not declared. Should it be static?
warning: symbol 'subdev_700_cleanup' was not declared. Should it be static?
warning: symbol 'dio700_cs_driver' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: double unlock in usbduxsigma_attach()

There was a double unlock introduced in 60ff461067 ("staging: comedi:
usbduxsigma: use attach_usb() hook").

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: factor out the find PCI device code

Factor out the code that finds a matching PCI device from attach
function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove private INLINE macro

The INLINE macro is not used in the code. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove private DEBUG macro

The private DEBUG macro defined in this driver outputs a lot
of function tracing noise. This information might be useful
when first developing the driver but should not be in the
mainlined code.

If any of this is needed in the future it should be added back
using the proper dev_printk interface.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 7

Move up the remaining functions needed to remove the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 6

Move the enc_private_data definition down to remove the need
for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 5

Move the irq set/reset/clear and ns_to_timer helper functions
up to remove the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 4

Move the DAC functions up to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 3

Move the I2C functions up to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 2

Move the DEBI* i/o functions up to remove the need for the
forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove forward declarations 1

Move the s626_attach and s626_detach functions down to match
the coding style of the other comedi drivers. Then remove
the forward declarations that are no longer needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: pointers should be cleared with NULL not 0

pdma->LogicalBase is a void *, NULL should be used to clear it not 0.

This quiets a sparse warning about:

warning: Using plain integer as NULL pointer

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: local functions should not be exposed globally

The 'ResetADC' function is prototyped as a static but is missing
the static tag in it's definition. The function is only referenced
in this file so add the static tag to the definition.

This quiets a sparse warning about:

warning: symbol 'ResetADC' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram_core: Better ECC size checking

- Instead of exploiting unsigned overflows (which doesn't work for all
  sizes), use straightforward checking for ECC total size not exceeding
  initial buffer size;

- Printing overflowed buffer_size is not informative. Instead, print
  ecc_size and buffer_size;

- No need for buffer_size argument in persistent_ram_init_ecc(),
  we can address prz->buffer_size directly.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram_core: Proper checking for post_init errors (e.g. improper ECC size)

We will implement variable-sized ECC buffers soon, so post_init routine
might fail much more likely, so we'd better check for its errors.

To make error handling simple, modify persistent_ram_free() to it be safe
at all times.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram: Fix error handling during przs allocation

persistent_ram_new() returns ERR_PTR() value on errors, so during
freeing of the przs we should check for both NULL and IS_ERR() entries,
otherwise bad things will happen.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram: Probe as early as possible

Registering the platform driver before module_init allows us to log oopses
that happen during device probing.

This requires changing module_init to postcore_initcall, and switching
from platform_driver_probe to platform_driver_register because the
platform device is not registered when the platform driver is registered;
and because we use driver_register, now can't use create_bundle() (since
it will try to register the same driver once again), so we have to switch
to platform_device_register_data().

Also, some __init -> __devinit changes were needed.

Overall, the registration logic is now much clearer, since we have only
one driver registration point, and just an optional dummy device, which
is created from the module parameters.

Suggested-by: Colin Cross <ccross@android.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: add vcnl4000 combined ALS and proximity sensor

minimal driver, no IR current control and proximity/event
handling yet

v5:
* checkpatch warnings
* increase msleep() to 20 ms when waiting for data ready as
  measurement/conversion can take up to 100 ms, 1 ms is too short

v4 (address comments by Jonathan Cameron)
* remove SENSORS_ prefix in Kconfig
* change from IIO_INTENSITY to IIO_LIGHT
* move from staging

v3 (address comments by Shubhrajyoti Datta)
* cleanup Kconfig entry
* call I2C read/write functions directly

v2 (address comments by Lars-Peter Clausen and Jonathan Cameron)
* unify code for reading PS and AL data into
  parameterized _measure() function
* limit wait for data to become ready within 20 tries
* drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY
* drop extra string arguments used for logging purpose only

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: Finish conversion to a separate module

ZSMALLOC is tristate, but the code has no MODULE_LICENSE and since it
depends on GPL-only symbols it cannot be loaded as a module.  This in
turn breaks zram which now depends on it.  I assume it's meant to be
Dual BSD/GPL like the other z-stuff.

There is also no module_exit, which will make it impossible to unload.
Add the appropriate module_init and module_exit declarations suggested
by comments.

Reported-by: Christian Ohm <chr.ohm@gmx.net>
References: http://bugs.debian.org/677273
Cc: stable@vger.kernel.org # v3.4
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ssv_dnp: remove empty private data

The private data struct 'dnp_private_data' contains no information.
Remove it and the alloc_private() call.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Change order in if conditions to make more readable in nvm.c

This patch changes the order of several if conditions
to make the code more readable.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Change conditions that check for NULL in nvm.c

This patch changes all conditions that check for NULL
from "if (variable == NULL)" or "if (NULL == variable)"
to "if (variable)" to make code more readable.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replace UINT with "unsigned int" in nvm.c

This patch replaces all uppercase UINT with "unsigned
int".

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replace INT with int in nvm.c

This patch replaces all uppercase INT with lowercase
int.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/ft1000: remove usage of ret in ft1000_open

remove the ret and do a simple  "return ft1000_submit_rx_urb"

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/ft1000: use kzalloc to allocate the ft1000_device structure

with kzalloc the allocate memory is set to zero, so no need of
calling memset again on the allocated memory

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/ft1000: Return -ENOMEM if kmalloc fails at ft1000_probe

If the kmalloc fails return -ENOMEM , returning 0 is not the proper
way if any function fails

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Set AC_VO priority

Set packet priority to AC_VO for audio data.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: udev support

Register ozmo_wpan class with sysfs & support for udev
to create device node.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: set last_pkt_nb

In case of trigeered ISOC mode set last_pkt_nb only when
we are ready to send data.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: kmalloc flag

Pass right flag as memory is assigned in process
 context.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Correct ioctl numbers.

ioctl numbers were not in order, rearranging them in ascending order.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: ISOC transfer in triggered mode

This patch implements ISOC frame transfer while PD is in
 triggered mode.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: refactor init code

Refactor the usb driver probe/disconnect and comedi driver attach/
detach to follow the style of the other comedi driver types to
improve maintainability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: refactor init code

Refactor the usb driver probe/disconnect and comedi driver attach/
detach to follow the style of the other comedi driver types to
improve maintainability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: refactor init code

Refactor the usb driver probe/disconnect and comedi driver attach/
detach to follow the style of the other comedi driver types to
improve maintainability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: refactor init code

Refactor the usb driver probe/disconnect and comedi driver attach/
detach to follow the style of the other comedi driver types to
improve maintainability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: use module_comedi_usb_driver()

Use the module_comedi_usb_driver helper macro to initialize this
module. Rename the driver structs to follow the pattern of the
other comedi driver types and add some whitespace to improve
readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: use module_comedi_usb_driver()

Use the module_comedi_usb_driver helper macro to initialize this
module. Rename the driver structs to follow the pattern of the
other comedi driver types and add some whitespace to improve
readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: use module_comedi_usb_driver()

Use the module_comedi_usb_driver helper macro to initialize this
module. Rename the driver structs to follow the pattern of the
other comedi driver types and add some whitespace to improve
readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use module_comedi_usb_driver()

Use the module_comedi_usb_driver helper macro to initialize this
module. Rename the driver structs to follow the pattern of the
other comedi driver types and add some whitespace to improve
readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: remove redundant depends on tests

The 'depends on COMEDI_ISA_DRIVERS' for COMEDI_AMPLC_DIO200_ISA is
not needed. This option is alread in an if/endif block that will
satisy the check.

The 'depends on COMEDI' for COMEDI_NI_COMMON was missed when all
the comedi options were wrapped in an if/endif block.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: menuconfig options should be bool

The menuconfig options to enable the various comedi driver types
should be bool not tristate. They don't directly affect the
building of the kernel, they just allow other options to be
selected.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove CONFIG_COMEDI_PCI define

CONFIG_COMEDI_PCI is not actually a Kconfig option. It is defined
in the comedidev.h header based on another Kconfig option being
enabled.

It is only referenced in the skel driver to conditionally compile
in the PCI support code. Use the CONFIG_COMEDI_PCI_DRIVERS Kconfig
option instead and remove the define.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove unused CONFIG_COMEDI_PCMCIA define

CONFIG_COMEDI_PCMCIA is not actually a Kconfig option. It is
defined in the comedidev.h header based on another Kconfig
option being enbled.

Just remove it since the define is not used by any of the comedi
drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: fix drivers that require the 8255 driver

Many of the comedi drivers require the 8255 driver for
various subdevice support. The Makefile currently uses
CONFIG_COMEDI_PCI_DRIVERS to make sure the 8255 driver
is compiled. The Kconfig help for that option says that
it does not directly affect the kernel.

Fix this by adding 'select COMEDI_8255' to the drivers
that actually need the support.

Also, remove two cases where the drivers don't require
the 8255 support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: shrink comedi_compat32.h

"comedi_compat32.h" #include's <linux/compat.h>, but that is only needed
by "comedi_compat32.c" so move the #include to that file.  Also,
"comedi_compat.h" doesn't really need the '#include <linux/fs.h>' just
to declare 'struct file' as it only uses it to construct a pointer to
that type.  Replace that #include with an incomplete declaration of
'struct file' and move that #include into "comedi_compat32.c".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove comedi_fops.h

Move the contents of "comedi_fops.h" into "comedi_internal.h" and delete
"comedi_fops.h". It only contains a couple of external variable
declarations (and #include <linux/types.h>) and one of those isn't even
declared in "comedi_fops.c".  The other one is an external declaration
of a variable used to store a module parameter and some of those are
already externally declared in "comedi_internal.h", so they can keep it
company!

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_internal.h inclusion guards

Add a multiple inclusion guard macro to "comedi_internal.h".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rename internal.h to comedi_internal.h

Use a less generic name for this internal header file included by
various parts of the comedi core.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: make class and file operations static

A couple of global variables in "comedi_fops.c" are only referenced from
that .c file and can be declared 'static'.  Also remove them from
"comedi_fops.h" where they are declared 'extern'.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: provide a MODULE_LICENSE for csr_helper.ko

I forgot a license for the csr_helper module, so it would not properly
load as it depends on other GPL-only symbols.

Reported-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: update to version 5.1.0 of the driver

This brings the in-kernel driver up to the level of the
csr-linux-wifi-5.1.0-oss.tar.gz tarball.

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: add CSR wifi module

This consists of two modules, the driver, and a "helper" module that is
just a wrapper around common kernel functions.  The wrapper module will
be removed soon, but for now it's needed.

These files were based on the csr-linux-wifi-5.0.3-oss.tar.gz package
provided by CSR and Blue Giga, and is covered under the license
specified in the LICENSE.txt file (basically dual BSD and GPLv2).  The
files were flattened out of the deep directory mess they were originally
in, and a few EXPORT_SYMBOL_GPL() were added in order for everything to
link properly with the helper module setup.

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: add CSR Wifi "os helper" module

This module is used by the CSR wifi driver to "abstract" away the
OS-specific parts of core functions.  It will be eventually deleted, but
for now is needed as the CSR driver relies on it.

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_compat_ioctl should be NULL not 0

When CONFIG_COMPAT is not defined, comedi_compat_ioctl should be
NULL not 0 in order to set the file_operations compat_ioctl variable
correctly.

This quiets a sparse warning about:

warning: Using plain integer as NULL pointer

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: quiet NULL pointer sparse noise

The comedi_async 'inttrig' member is a pointer to a callback
function. NULL should be used to clear it not 0.

This quiets a number of sparse warnings about:

Warning: Using plain integer as NULL pointer

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio staging: another typo in iio_simple_dummy_buffer

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: remove extra ; after function definition

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: correct documentation for IIO_CONST_ATTR_SAMP_FREQ_AVAIL, match name of #define

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: typo in iio_chan_spec.ext_info comment

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio staging: fix spelling of suppression in isl29018

beware, does change the ABI as proximity_on_chip_ambient_infrared_supression
is changed to proximity_on_chip_ambient_infrared_suppression

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio staging: fix tsl2x7x file mode

just drop execute permission

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio staging: fix typos in tsl*: register

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad799x: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad7887: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad7793: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad7606: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad7476: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad7298: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

The previous code was not passing the temperature channel to iio_buffer_register
since the temperature channel can not be used in buffered mode. With the new
helper functions it is not possible to do this, instead the scan index for the
temperature channel is set to -1 which will cause iio_buffer_register to ignore
the channel. (Also While we are at it also assign the symbolic constant instead
of the raw value to the channel address for the temperature channel).

Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:ad7192: Use new triggered buffer setup helper function

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:at91: Use new triggered buffer setup helper

Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: Add helper function for initializing triggered buffers

Add a helper function for executing the common tasks which are usually involved
in setting up a simple software ringbuffer. It will allocate the buffer,
allocate the pollfunc and register the buffer.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: iio_buffer_register: Skip channels with negative scan index

It is not always the case that all channels can be used in buffered mode. This
patch allows channels, which can not be used in buffered mode, to set their scan
index to a negative number, which will cause iio_buffer_register to ignore the
channel.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fix a typo.

The below patch fixes a typo found while reading through staging/slicoss

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: Fix some typos.

Fixes some typos that was found while reading through staging/serqt_usb2

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Replace pr_* with dev_* when possible.

Replace pr_* calls with dev_* ones when the device structure is available.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Fix sparse warnings.

Add include files with function definitions to avoid sparse warnings.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove printk usage.

Replace meaninful printks with pr_debug and remove useless ones.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove XGIFAIL() macro and its calls.

XGIFAIL() prints a message and returns a value, but it's used only in one
place. Better remove it and replace the call with the macro content.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: define real dumpVGAReg() content only in DEBUG mode.

Define real content of dumpVGAReg() only in debug mode. Remove old condition.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>