ASoC: qdsp6: q6routing: Add support to all SLIMBus Mixers

This patch adds support to SLIMBus related mixers to control mux between
ASM stream and AFE port.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6routing: Add q6routing driver

This patch adds support to q6 routing driver which configures route
between ASM and AFE module using ADM apis.

This driver uses dapm widgets to setup the matrix between AFE ports and
ASM streams.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6asm: Add support to audio stream apis

This patch adds support to open, write and media format commands
in the q6asm module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6asm: Add support to memory map and unmap

This patch adds support to memory map and unmap regions commands in
q6asm module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6asm: Add q6asm driver

This patch adds basic support to Q6 ASM (Audio Stream Manager) module on
Q6DSP. ASM supports up to 8 concurrent streams. each stream can be setup
as playback/capture. ASM provides top control functions like
Pause/flush/resume for playback and record. ASM can Create/destroy encoder,
decoder and also provides POPP dynamic services.

This patch adds support to basic features to allow hdmi playback.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6adm: Add q6adm driver

This patch adds support to Q6ADM (Audio Device Manager) module in
q6dsp. ADM performs routing between audio streams and AFE ports.
It does Rate matching for streams going to devices driven by
different clocks, it handles volume ramping, Mixing with channel
and bit-width. ADM creates and destroys dynamic COPP services
for device-related audio processing as needed.

This patch adds basic support to ADM.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: dma driver changes for bt i2s instance

With in ACP, There are three I2S controllers can be
configured/enabled ( I2S SP, I2S MICSP, I2S BT).
Default enabled I2S controller instance is I2S SP.
This patch provides required changes to support I2S BT
controller Instance.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: AMD: Add const to snd_soc_ops instances

Marking snd_soc_ops instances const

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: AMD: Fix clocks in CZ DA7219 machine driver

System clock on the platform is 25Mhz and not 24Mhz.

PLL_OUT for da7219 codec to use DA7219_PLL_FREQ_OUT_98304
as it is for 48KHz SR.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: AMD: Move clk enable from hw_params/free to startup/shutdown

hw_param can be called multiple times and thus we can have
more clk enable. The clk may not get diabled due to refcounting.
startup/shutdown ensures single clk enable/disable call.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: memory release for rtd structure

rtd structure freed early may result in kernel panic in dma close
call back. moved releasing memory for rtd structure to the end of
dma close callback.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: sram bank update changes

Added sram bank variable to audio_substream_data structure.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: pte offset related dma driver changes

Added pte offset variable in audio_substream_data structure.
Added Stoney related PTE offset macros in acp header file.
Modified hw_params callback to assign the pte offset value
based on asic_type.
PTE Offset macros used to calculate no of PTE entries
need to be programmed when memory allocated for audio buffer.
Depending upon allocated audio buffer size, PTE offset values
will change.
Compared to CZ, Stoney has SRAM memory limitation i.e 48k
It is required to define separate PTE Offset macros for
Stoney.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6afe: Add support to MI2S sysclks

This patch adds support to LPASS Bit clock, LPASS Digital
core clock and OSR clock. These clocks are required for both
MI2S and PCM setup.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6afe: Add support to MI2S ports

This patch adds support to 4 MI2S ports on LPASS.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: qdafe: Add SLIMBus port Support

This patch adds support to 6 SLIMBus AFE ports, which are used as
backend dais.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6afe: Add q6afe driver

This patch adds support to Q6AFE (Audio Front End) module on Q6DSP.

AFE module sits right at the other end of cpu where the codec/audio
devices are connected.

AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: core: fix return code in error message

Log the correct error code in case the .open() call to a component fails.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: Mark 'big-endian' property as optional

Currently the 'big-endian' property is listed as required, which is
not correct. i.MX SoCs do not need such property, so move it under
'Optional properties' entry instead.

Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so
change it to 'SAI registers', which is the intended description.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: skylake: fix spelling mistake: "Homogenous" -> "Homogeneous"

Trivial fix to spelling mistake in snprintf literal string

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm512x: Add ACPI support

HID is assumed to be made of TI PCI ID (0x104C) + part number, so all
four 104C5121, 104C5122, 104C5141 104C5142 are valid.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5677: Convert I2C driver to ->probe_new()

There is no platform code that uses i2c module table.
Remove it altogether and adjust ->probe() to be ->probe_new().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ssm2305: fix header layout

Make C-header and SPDX-License-Identifier header uniform.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm2200,wm5100: fix spelling mistake: "Coefficeints" -> "Coefficients"

Trivial fix to spelling mistakes in SND_SOC_BYTES literal strings

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8904: fix spelling mistake: "Caputure" -> "Capture"

Trivial fix to spelling mistake in SOC_ENUM literal string

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: qcom: apr: fix invalid msg_type check

Removed invalid msg_type check.
This also fixes below static checker warning:
apr.c:95:35: warning: comparison is always true due to limited range of
 data type [-Wtype-limits]
warn: always true condition '(msg_type != 69864) => (0-u16max != 69864)'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5670: improve PLL function's stability

Set PR-38 register to 0x1fe1 will make PLL function more stable.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ssm2305: Add amplifier driver

The ssm2305 is a simple Class-D audio amplifier. A application can
turn on/off the device by a gpio. It's also possible to hardwire the
shutdown pin.

Tested on a i.MX6 based custom board.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6core: Add q6core driver

This patch adds support to core apr service, which is used to query
status of other static and dynamic services on the dsp.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: zte: remove duplicate includes

These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.

Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: davinci-mcasp: Only disable inactive serializer

As a side effect of the following commit, the active TX
serializer may get disabled which may result in distorted
audio output.

ASoC: davinci-mcasp: Add support for multichannel playback
(2952b27e2e463b28d5c0f04000f96b968137ca42)

For example, if a 4 channel I2S playback with two TX serializers
is activated. Later on, if a recording of 2 channels, with only 1 RX
serializer is started, which will also disable one of the TX
serializer because max_active_serializers is only calculated for
RX (recording) stream. This patch fixes this issue.

Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks

Many X86 devices using a BYT SoC + RT5640 codec are cheap devices with
generic DMI strings, causing snd_soc_set_dmi_name() to fail to set a
long_name, making it impossible for userspace to have a correct UCM
profile which only uses inputs / outputs which are actually hooked up
on the device.

Our quirks already specify which input the internal mic is connected to
and if a single (mono) speaker is used or if the device has stereo
speakers.

This commit sets a long_name based on the quirks so that userspace can
have UCM profiles doing the right thing based on the long_name.

Note that if we ever encounter the need for a special UCM profile for
some device we can add a quirk to set a specific long_name for the
device,

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirks for various devices

Even with our recently tweaked defaults, quite a few bytcr_rt5640 devices
still need quirks to be fully functional. This commits adds quirks where
necessary for the 16 bytcr_rt5640 devices I have access to.

The quirks are added for the following reasons:

1) Devices with only one speaker need the mono quirk to avoid driving an
unused and potentially short-circuited output. 8 of my sample of 16 devs
are mono, 4 of these would work with the defaults if it were not for their
mono speaker.

2) Devices using a different input for the internal mic then the default,
this is the case for 6 of my sample of 16 devices.

3) BYTCR devices without an ACPI channel map, which do not work with the
default of SSP0-AIF2, this is the case for 2 of my sample of 16 devices.

4) Devices which need non-default jack-detect settings, this is the case
for 6 of my sample of 16 devices.

This commit add quirks for the following devices:

Acer Iconia Tab 8 W1-810
Chuwi Vi8
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Pipo W4
PoV-mobii-800w (v2.0)
PoV-mobii-800w (v2.1)
Toshiba Click Mini L9W-B

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Use dmi_first_match() for DMI quirk handling

Use dmi_first_match() instead of dmi_check_system() + callbacks, this
avoid the need to initialize dmi_system_id.callback for each
byt_rt5640_quirk_table entry.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Sort DMI quirk list alphabetically

As we add more quirks it is useful to have some sort of order in the
quirk list, sort it alphabetically.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Add default jack-detect settings

Out of the 11 BYTCR devices which I have access to for testing, 6 use
JD1IN4P for jack-detect, 2 use JD1IN4P non-inverted and the other 3 use
JD2IN4N, the ones not using JD1IN4P are all also special in other ways and
need a DMI quirk regardless.

All 5 BYT (non CR) devices which I have access to use JD2IN4N.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Unify BYTCR input defaults

Currently we've 2 places with BYTCR defaults: 1. The generic catch-all
DMI_SYS_VENDOR=="Insyde" DMI quirk which selects SSP0-AIF1 for generic
Insyde BYTCR tablets without the ACPI channel package; and 2. the
defaults in the if (is_bytcr) {} code block.

Currently these are not identical, both select IN3 as the internal mic
output, but the "Insyde" DMI quirk leaves out the DIFF_MIC quirk. The
DIFF_MIC quirk should be enabled by default, because enabling diff. input
helps a lot for devices with a differential mic, where as it is a nop on
devices with a normal mic.

This commit adds the DIFF_MIC quirk to the "Insyde" DMI quirk path, by
adding a new BYTCR_INPUT_DEFAULTS define and using that in both code paths
which set BYTCR defaults.

Having a single place where the BYTCR input defaults are defined also
allows defining jack-detect defaults in a single place in a follow-up
commit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Change BYTCR default input to IN3

Out of the 11 BYTCR devices which I have access to for testing,
7 use IN3 for the internal mic and only 1 uses IN1 for the internal mic,
the other 3 use DMIC1.

So IN3 clearly is a better default, using IN3 as default avoids the need
to add DMI quirks for some of these devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Enable jack detection

Add code to support setting jack-detect parameters through quirks and
extend the existing DMI quirk table entries for the Asus T100TA and the
Dell Venue 8 Pro 5830 to enable jack detection.

Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Fix Dell Venue 8 5830 Pro quirk

This fixes the following 3 issues:

1) The sys_vendor match should be for "Dell Inc." not "DellInc.",
   without this fixed the quirk never gets applied
2) DMIC1 is used not DMIC2, this was not a problem sofar because for
   regular BYT boards (rather then BYTCR) we default to DMIC1 and because
   of 1. the quirk was not being applied
3) The Dell Venue 8 5830 Pro only has a single speaker

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Use device properties for setting up dmic

Use device-properties for setting up the dmic, based on the
BYT_RT5640_MAP() value, instead of using the codec specific
rt5640_dmic_enable() function for this.  This also removes the need
for the BYT_RT5640_DMIC_EN quirk, which was always set together with
a MAP() quirk of DMIC1_MAP or DMIC2_MAP.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5663: rt5663_set_jack_detect() can be static

Fixes: 9958e8afbcad ("ASoC: rt5663: Use the set_jack() instead of the export function")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5663: Use the set_jack() instead of the export function

The patch replaces the export function with the new API set_jack().

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap: sdma-pcm: Correction for the include files

The sdma-pcm does not need any information from omap-dma.h, it only needs
to include the omap-dmaengine.h - for the omap_dma_filter_fn, but that
might not be needed at all as OMAP1 was converted to dma_slave_map, but
I can not test OMAP1.

Add the linux/device.h include as well for devm_kzalloc()

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap: sdma-pcm: Fix modpost warning

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/omap/snd-soc-sdma.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/omap/snd-soc-sdma.o
see include/linux/module.h for more information

Add the missing MODULE_LICENSE.

This patch also going to solve:
snd_soc_sdma: Unknown symbol devm_kmalloc (err 0)
snd_soc_sdma: Unknown symbol omap_dma_filter_fn (err 0)
snd_soc_sdma: Unknown symbol snd_dmaengine_pcm_prepare_slave_config (err 0)
snd_soc_sdma: Unknown symbol devm_snd_dmaengine_pcm_register (err 0)

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Fix compile error

Fix the compile error introduced by: "ASoC: Intel: bytcr_rt5640:
Configure PLL1 before using it".

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: hisilicon: fix spelling mistake: "uknown" -> "unknown"

Trivial fix to spelling mistake in dev_err message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: compress: Fix up some trivial formatting issues

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: compress: Only assign compr->ops->copy once

There are only one set of ops on the compressed stream so no need to
reassign the copy callback repeatedly, stop after copy is seen to be
necessary.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6common: Add qdsp6 helper functions

This patch adds some common helper functions like translating dsp error
to linux error codes and channel mappings etc.

These functions are used in all the following qdsp6 drivers.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: dt-bindings: Add q6asm dt bindings

This patch add DT bindings for ASM (Audio Stream Manager) DSP module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: dt-bindings: Add q6adm dt bindings

This patch add DT bindings for ADM (Audio Device Manager) DSP module.
This module implements mixer controls to setup the connections between
AFE ports and ASM streams.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: dt-bindings: Add q6afe dt bindings

This patch add DT bindings for AFE (Audio Frontend) DSP module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: dt-bindings: Add q6core dt bindings

This patch add DT bindings for Q6CORE DSP module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: qcom: Add APR bus driver

This patch adds support to APR bus (Asynchronous Packet Router) driver.
APR driver is made as a bus driver so that the apr devices can added removed
more dynamically depending on the state of the services on the dsp.
APR is used for communication between application processor and QDSP to
use services on QDSP like Audio and others.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: qcom dt-bindings: Add APR bus bindings

This patch add dt bindings for Qualcomm APR (Asynchronous Packet Router)
bus driver. This bus is used for communicating with DSP which provides
audio and various other services to cpu.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: removed separate byte count variables for playback and capture

Removed separate byte count variables for playback and capture.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: added byte count register offset variables to rtd

Added byte count register offset variables to audio_substream_data
structure. Modified dma pointer callback.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: dma config parameters changes

Added dma configuration parameters to rtd structure.
Moved dma configuration parameters initialization to
hw_params callback.
Removed hard coding in prepare and trigger callbacks.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cirrus: i2s: IRQ-based stream watchdog

I2S controller on EP93xx seems to have undocumented HW issue. According to
"EP93xx User’s Guide", controller can handle underflow and either transmit
last sample or zeroes in such case until FIFO is filled again. In reality
undeflow conditions seem to confuse internal state machine from time to
time and the whole stream gets shifted by one byte (as captured by logic
analyser on the I2S outputs). One could only hear noise instead of original
stream and this continues until the FIFO is disabled and enabled again.

Work this around by watching underflow interrupt and resetting I2S TX
channel + fill FIFO with zero samples until DMA catches up again. This is
a nasty workaround, but it works. Hence, Kconfig option to disable it in
case of problems.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ARM: ep93xx: i2s: Add IRQ to platform device resources

According to "EP93xx User’s Guide" it's called I2SINTR and has number 60.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cirrus: i2s: Stop enabling I2S2 and I2S3 FIFOs

The driver never supported more than 2 channels because of
ep93xx_i2s_dma_data[] supporting only 1 DMA channel in each
direction.
Stop enabling two unused I2S controller FIFOs, this will simplify
future interrupt support.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 320

The Lenovo Ideapad Mixx 320 has a digital mic connected to DMIC2
add a DMI based quirk pointing to the intel_braswell_platform_data
for devices with a mic on DMIC2.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 310

The Lenovo Ideapad Mixx 310 has a differential internal analog mic,
add platform-data for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap: Delete the obsolete omap-pcm

All DAI drivers are now using the new sdma-pcm platform driver. The
omap-pcm can be removed from the tree, but we need to keep the SND_OMAP_SOC
Kconfig option until the relevant defconfigs are updated to avoid
regression due to missing audio.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: davinci-mcasp: Convert to use the sdma-pcm instead of omap-pcm

Use the new platform driver in case of sDMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Use device-property for differential mics

Set the "realtek,in1-differential" or "realtek,in3-differential"
device-property when the BYT_RT5640_DIFF_MIC quirk is set instead of
directly poking the codec registers.

This also fixes the BYT_RT5640_DIFF_MIC quirk not working when
combined with BYT_RT5640_IN3_MAP.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Configure PLL1 before using it

When platform_clock_control() first selects PLL1 as sysclk the PLL_CTRL
registers have not been setup yet and we effectively have an invalid clock
configuration until byt_rt5640_aif1_hw_params() gets called.

Add a new byt_rt5640_prepare_and_enable_pll1() helper and use that from
both platform_clock_control() and byt_rt5640_aif1_hw_params() to fix this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Add button press support

Enable button press detection for headsets by using the ovcd IRQ to get
notified of button presses.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Add jack-detect support

Add jack-detect support, loosely based on earlier work on this by:

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Francisco mendez <francisco.mendez@intel.com>

Note getting the OVCD to work reliable was sort of finicky, so there are
quite a few comments on this to hopefully avoid people breaking it in the
future.

This (and the follow-up button press support) has been tested on the
following devices:

Acer Iconia Tab 8 W1-810
Asus T100CHI
Asus T100TA
Asus T200TA
Axxo WT1011
Chuwi Vi8
Dell Venue 8 Pro 5830
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Peaq C1010
Pipo W4
PoV MobiiTAB-P800W (v2.0)
Toshiba Click Mini L9W-B

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196377
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Allow specifying dmic data pins through device-properties

Allow specifying dmic data pins through device-properties / dt. This will
allow us to stop exporting rt5640_dmic_enable() once all callers of it have
been converted to setting device-properties for this instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Move checking of device-properties to component probe callback

On some platforms the platform code may need to add device-properties,
rather then relying only on properties set by the firmware.

This commit moves the parsing of the device-properties from the i2c-driver
probe() function, which may be called at any time, to the component-driver
probe() function, which gets called after the platform code calls
snd_soc_register_card().

This allows the platform code to attach extra device-properties before
the device-properties are parsed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Remove unused rt5640_platform_data

There are no in tree users of platform-data for the rt5640 codec driver,
so lets remove support for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Add devicetree-bindings for dmic, jack-detect

Add devicetree-bindings for the dmic, jack-detect source and overcurrent-
detect threshold settings.

The dmic bindings mirror the existing bindings for the rt5645.
The jd-src and ovcd bindings mirror the existing bindings for the rt5651.

Cc devicetree@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5640: Remove is_sys_clk_from_pll, it has ordering issues

is_sys_clk_from_pll() is used as a snd_soc_dapm_route.connected callback,
checking RT5640_GBL_CLK to determine if the sys-clk is PLL1 and thus the
PWR_PLL bit in reg PWR_ANLG2 must be set.

RT5640_GBL_CLK is changed by rt5640_set_dai_sysclk(), which gets called by
the pre_pmu / post_pmd functions of the "Platform Clock" dapm-supply.

This creates an ordering issue, during a dapm transition first all
connected() callbacks are called to build a list of supplies to enable
and then the complete list is walked to enable the supplies. Since the
connected() check happens before enabling any supplies,
is_sys_clk_from_pll() ends up deciding if the PWR_PLL bit should be set
based on the state the "Platform Clock" supply had *before* the transition.
This sometimes results in PWR_PLL being off, even though *after* the
transition PLL1 is configured as sys-clk.

This commit removes is_sys_clk_from_pll() instead simply setting / clearing
PWR_PLL in rt5640_set_dai_sysclk() based on the selected sys-clk, which
fixes this and as a bonus results in a nice cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: zx-i2s: fix spelling mistake: "timeing" -> "timing"

Trivial fix to spelling mistake in dev_err message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: uniphier: add digital output volume for UniPhier sound system

This patch adds controllers for digital volume of PCM output. Volume
effects simply linear, not dB scale as follows:
  Gained PCM = Original * 0x4000 / Volume

The value range of volume is from 0x0001 to 0xffff. 0x0000 works as
mute. Initial value is 0x4000 (+0dB).

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove legacy_dai_naming from snd_soc_register_dais()

We can get legacy dai name flag from component driver.
Thus, there is no need to have its parameter on snd_soc_register_dais().
Let's remove unneeded parameter

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove snd_soc_component_add_unlocked()

There is no user to call snd_soc_component_add_unlocked() anymore.
Let's merge snd_soc_component_add_unlocked() and
snd_soc_component_add().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc.h: merge CONFIG_DEBUG_FS

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: convert platform explanation to component

commit ef050bece1b55 ("ASoC: Remove platform code now everything is
componentised") removed platform code, but it didn't care
about platform documentation.
This patch convert platform explanation to component

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: add component_list_show()

commit ef050bece1b55 ("ASoC: Remove platform code now everything is
componentised") removed platform code, then platform_list_show() was
removed, too. But we want to keep it as component_list_show.
This patch add it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: remove Codec related code

Now no one is using Codec related code.
Let's remove all

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: remove unneeded .pcm_new/free

commit ef050bece1b55 ("ASoC: Remove platform code now everything is
componentised") removed platform code, but it didn't remove
.pcm_new/free which existed only for platform.
This patch remove these

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: remove .get_regmap

To setup regmap, ALSA SoC has snd_soc_component_init_regmap() and
.get_regmap. But these are duplicated feature.
Now, no one is using .get_regmap, let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: remove codec reg_cache

Codec reg_cache is legacy feature, almost all driver are now using
common regmap, and very few driver had been used this legacy feature.
Because of this background, it is now implemented on each
driver internally now.
So now, no one is using codec reg_cache. Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: remove codec hw_write/control_data

No one is using codec hw_write/control_data any more.
Let's remove these.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap-mcbsp: Convert to use the sdma-pcm instead of omap-pcm

Use the new platform driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap-mcpdm: Convert to use the sdma-pcm instead of omap-pcm

Use the new platform driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap-dmic: Convert to use the sdma-pcm instead of omap-pcm

Use the new platform driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap-hdmi-audio: Convert to use the sdma-pcm instead of omap-pcm

Use the new platform driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: omap: Introduce the generic_dmaengine_pcm based sdma-pcm

With the generic dmaengine_pcm support the omap-cpm can be replaced with a
much smaller wrapper.

CPU DAI drivers can use the:
int sdma_pcm_platform_register(struct device *dev,
       char *txdmachan, char *rxdmachan);

To register the platform driver, txdmachan/rxdmachan is only needed to be
provided if the DMA channel names are not standard tx/rx, like in case of
McPDM, or the DAI is only capable of one audio direction (DMIC, HDMI).

This patch only introduces the source file and changes to the
Kconfig/Makefile, but does not change any of the DAI drivers to use it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: uniphier: evea: use DAPM to change source of line-in

This patch replaces mixer switch to DAPM one for changing audio source
of line-in.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8824: fix spelling mistake: "semaphone" -> "semaphore"

Trivial fix to spelling mistake in dev_warn messages

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fix return value check in mt6351_codec_driver_probe()

In case of error, the function dev_get_regmap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

media: i2c: tda1997: replace codec to component

Now we can replace Codec to Component. Let's do it.

Note:
xxx_codec_xxx() -> xxx_component_xxx()
.idle_bias_off = 0 -> .idle_bias_on = 1
.ignore_pmdown_time = 0 -> .use_pmdown_time = 1
- -> .endianness = 1
- -> .non_legacy_dai_naming = 1

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5663: Optimize the power consumption

The patch optimizes the power consumption.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs42xx8: Make the node name generic

According to Devicetree Specification v0.2 document:

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the binding example.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8960: Make the node name generic

According to Devicetree Specification v0.2 document:

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the binding example.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8962: Make the node name generic

According to Devicetree Specification v0.2 document:

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the binding example.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>