Marek Szyprowski [Tue, 18 May 2010 10:38:41 +0000 (12:38 +0200)]
ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio
functionality is now supported. Gpio interrupts are disabled temporarly
and will be added later.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:40 +0000 (12:38 +0200)]
ARM: S5PC100: Use common functions for gpiolib implementation
GPIOlib helpers from plat-samsung already have functions for accessing
4bit gpio banks. This patch removes the duplicated functions from
plat-s5pc1xx/gpiolib.c.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:39 +0000 (12:38 +0200)]
drivers: serial: S5PC100 serial driver cleanup
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as
S3C6400/S3C6410/S5P6440.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Fri, 14 May 2010 07:27:28 +0000 (16:27 +0900)]
ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p
movement. The patches that perform the movement of the code from
plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the
build for the mach-s5pc100/clock.c code.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:23:35 +0000 (12:23 +0200)]
ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:23:36 +0000 (12:23 +0200)]
ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 19 May 2010 09:07:25 +0000 (18:07 +0900)]
ARM: Merge for-2635/samsung-rtc
Merge branch 'for-2635/samsung-rtc' into for-linus/samsung2
Conflicts:
arch/arm/mach-s3c64xx/include/mach/map.h
arch/arm/plat-samsung/Kconfig
arch/arm/plat-samsung/Makefile
Ben Dooks [Wed, 19 May 2010 09:05:42 +0000 (18:05 +0900)]
ARM: Merge for-2635/samsung-ts
Merge branch 'for-2635/samsung-ts' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:05:33 +0000 (18:05 +0900)]
ARM: Merge for-2635/s5p-audio
Merge branch 'for-2635/s5p-audio' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:05:15 +0000 (18:05 +0900)]
ARM: Merge for-2635/s5p-dma
Merge branch 'for-2635/s5p-dma' into for-linus/samsung2
Conflicts:
arch/arm/mach-s5pv210/Makefile
Ben Dooks [Wed, 19 May 2010 09:04:11 +0000 (18:04 +0900)]
ARM: Merge for-2635/fb-updates1
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:10 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5pv210-clock
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:09 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5p6440-clock
Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:09 +0000 (18:04 +0900)]
ARM: Merge for-2635/s3c6410-clock
Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:08 +0000 (18:04 +0900)]
ARM: Merge for-2635/gpio2
Merge branch 'for-2635/gpio2' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:07 +0000 (18:04 +0900)]
ARM: Merge for-2635/rx1950
Merge branch 'for-2635/rx1950' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:06 +0000 (18:04 +0900)]
ARM: Merge for-2635/acer-n35
Merge branch 'for-2635/acer-n35' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:06 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-clock
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:05 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-hwmon
Merge branch 'for-2635/samsung-hwmon' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:04 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-dma
Merge branch 'for-2635/samsung-dma' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:03 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5p-general
Merge branch 'for-2635/s5p-general' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:03 +0000 (18:04 +0900)]
ARM: Merge for-2635/s3c24xx-general
Merge branch 'for-2635/s3c24xx-general' into for-linus/samsung2
Pannaga Bhushan [Wed, 19 May 2010 08:25:32 +0000 (17:25 +0900)]
ARM: S5PV210: Add GPIOlib support
This patch adds GPIOlib support for S5PV210.
Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Fri, 14 May 2010 06:18:52 +0000 (08:18 +0200)]
ARM: SAMSUNGy: fix broken timer irq base
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
This fixes the commit
87aef30eb3c5dac0491c83fe3b90bc61f1df24ec
("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.")
which meant to move these into the old (and previously reserved)
ISA space.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: update description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:03:07 +0000 (16:03 +0900)]
ARM: SMDK6440: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:03:02 +0000 (16:03 +0900)]
ARM: S5P6440: Add audio platform devices
Define platform devices for all audio devices found on S5P6440
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:58 +0000 (16:02 +0900)]
ARM: SMDK6442: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:50 +0000 (16:02 +0900)]
ARM: S5P6442: Add audio platform devices
Define platform devices for all audio devices found on S5P6442
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:35 +0000 (16:02 +0900)]
ARM: SMDKC110: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:30 +0000 (16:02 +0900)]
ARM: SMDKV210: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:26 +0000 (16:02 +0900)]
ARM: S5PV210: Add audio platform devices
Define platform devices for all audio devices found on S5PV210
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Tue, 18 May 2010 10:07:05 +0000 (19:07 +0900)]
ARM: SAMSUNG: Fix additional increment when running through gpios
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios
field and the bank-bank offset inside the loop, and also in the
for() loop with a ++.
Remove the ++, as the number is already at the next GPIO, thus
ensuring that we don't skip a gpio bank by accident.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 06:12:33 +0000 (15:12 +0900)]
ARM: S3C24XX: Add note on GPIO bank sizes
Add a table for the GPIO bank sizes for each SoC
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:53:48 +0000 (14:53 +0900)]
ARM: S3C24XX: Remove macros mapping GPIO number to base
As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:28:44 +0000 (14:28 +0900)]
ARM: S3C24XX: Update missed gpio calls to use gpiolib
Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:13:16 +0000 (14:13 +0900)]
ARM: S3C24XX: Start cleanup of GPIO numbering
Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Wed, 12 May 2010 07:22:41 +0000 (10:22 +0300)]
ARM: S3C244X: fix gpiolib port J support
Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 3 May 2010 06:29:44 +0000 (15:29 +0900)]
ARM: SMDK2416: Add support for framebuffer device and ensure correct setup
Add support for the LCD display on the SMDJK2416, and correctly name the
framebuffer device.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 13 May 2010 05:44:50 +0000 (14:44 +0900)]
ARM: SAMSUNG: Set S3C_FB_MAX_WIN in <plat/fb.h>
Move the S3C_FB_MAX_WIN to the platform data to avoid
having to include the registers with the platform data.
Set S3C_FB_MAX_WIN to 5, which is the maximum that any
of the current hardware can do and the cost of having
it set to this for all is minimal (at least for the
platform data case), then always leave this as the maximum
for the systems supported.
Also remove the inclusion of <mach/regs-fb.h> from
the device definition in arch/arm/plat-samsung
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:34:25 +0000 (19:34 +0900)]
ARM: S3C2443: Fix definition of LCD clock bit
Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:08:38 +0000 (19:08 +0900)]
ARM: S3C2443: Add initial defines for framebuffer support
Add the necessary defines to get the s3c-fb device to compile for
s3c2443.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Mon, 17 May 2010 18:17:42 +0000 (20:17 +0200)]
ARM: S3C64XX: Add USB external clock definition
This adds the xusbxti clock to S3C64XX platform.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 02:59:34 +0000 (11:59 +0900)]
S5PV210: DMA: Add platform devices for PL330 DMACs
Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the other two meant for data
transfer with peripherals.
Define and add latter two PL330 DMACs as platform devices on the
S5PV210 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 02:59:27 +0000 (11:59 +0900)]
S5P6442: DMA: Add platform devices for PL330 DMACs
Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the second is meant for data
transfer with peripherals.
Define and add the peripheral PL330 DMAC as platform device on the
S5P6442 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 02:59:20 +0000 (11:59 +0900)]
S5P6440: DMA: Add platform devices for PL330 DMACs
Samsung's Soc S5P6440 has one PL330 DMAC.
Define and add the PL330 DMAC as platform device on the
S5P6440 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 02:59:06 +0000 (11:59 +0900)]
S3C: DMA: Add api driver for PL330
Latest Samsung SoCs have one or more PL330 as their DMACs. This patch
implements the S3C DMA API for PL330 core driver.
The design has been kept as generic as possible while keeping effort to
add support for new SoCs to the minimum possible level.
Some of the salient features of this driver are:-
o Automatic scheduling of client requests onto DMAC if more than
one DMAC can reach the peripheral. Factors, such as current load
and number of exclusive but inactive peripherals that are
supported by the DMAC, are used to decide suitability of a DMAC
for a particular client.
o CIRCULAR buffer option is supported.
o The driver scales transparently with the number of DMACs and total
peripherals in the platform, since all peripherals are added to
the peripheral pool and DMACs to the controller pool.
For most conservative use of memory, smallest driver size and best
performance, we don't employ legacy data structures of the S3C DMA API.
That should not have any affect since those data structures are completely
invisible to the DMA clients.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Atul Dahiya [Tue, 18 May 2010 05:58:56 +0000 (14:58 +0900)]
ARM: SAMSUNG: Move RTC device definitions in plat-samsung
This patch moves RTC device definitions from mach-s3c64xx
to plat-samsung, to enable the other SoCs to use same device
definition.
Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Naveen Krishna [Thu, 13 May 2010 13:06:36 +0000 (22:06 +0900)]
ARM: SAMSUNG: Moving ADC device definition to plat-samsung.
This patch moves ADC device definition to plat-samsung.
Because that is generic to the S3C64XX and S5P Series SoCs.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mike Solovyev [Wed, 12 May 2010 11:38:00 +0000 (15:38 +0400)]
ARM: h1940: framebuffer configuration fix
Seems like a typo, wrong setup leads to broken image on ipaq screen.
Signed-off-by: Mike Solovyev <ms@sk.2-ch.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Mon, 17 May 2010 01:35:29 +0000 (10:35 +0900)]
S3C: DMA: Change argument of s3c2410_dma_devconfig
All other functions have the channel argument of type 'unsigned int'
the s3c2410_dma_devconfig also accept the same value as argument but
treat it as type 'int'. Remove this anomaly by make it 'unsigned int'.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:39:03 +0000 (09:39 +0900)]
ARM: S5PV210: Add sclk clocks of type 'struct clksrc_clk' clock
Add sclk clocks of type 'struct clksrc_clk' clock. The 'group2' of
clock clock sources is also added. This patch also changes the the
'id' member value of the uclk1 clock for instance instance 0 since
there are 4 instances of the uclk1 clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:39:00 +0000 (09:39 +0900)]
ARM: S5PV210: Add sclk_audio and sclk_spdif clocks.
Add the sclk_audio(0/1/2) clocks and sclk_spdif clock of type
'struct clksrc_clk' clock. Also, add clk_pcmcdclk(0/1/2) clocks
of type 'struct clk' clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:57 +0000 (09:38 +0900)]
ARM: S5PV210: Add sclk_dac, sclk_mixer and sclk_hdmi clocks
Add sclk_dac, sclk_mixer and sclk_hdmi clocks. These clocks
are of type 'struct clksrc_clk' and so have a corresponding
clock list. These clocks are also added to the list of
clocks to be registered at boot time.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:55 +0000 (09:38 +0900)]
ARM: S5PV210: Add new system clocks
This patch adds the following system clocks.
1. clk_sclk_hdmiphy
2. clk_sclk_usbphy0
3. clk_sclk_usbphy1
4. sclk_dmc (dram memory controller clock)
5. sclk_onenand
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:52 +0000 (09:38 +0900)]
ARM: S5PV210: Add support for VPLL
This patch adds the following.
1. Adds 'clk_sclk_hdmi27m' clock to represent the HDMI 27MHz clock.
2. Adds 'clk_vpllsrc; clock of type clksrc_clk to represent the
input clock for VPLL.
3. Adds 'clk_sclk_vpll' clock of type clksrc_clk to represent the
output of the MUX_VPLL mux.
4. Add clk_sclk_hdmi27m, clk_vpllsrc and clk_sclk_vpll to the list
of clocks to be registered.
5. Adds boot time print of 'clk_sclk_vpll' clock rate.
6. Adds 'clk_fout_vpll' clock to plat-s5p such that it is reusable
on other s5p platforms.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:50 +0000 (09:38 +0900)]
ARM: S5PV210: Remove usage of clk_p66 and add clk_pclk_psys clock
The clk_p83 clock, which is the PCLK clock for PSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a clock divider). So this
patch replaces the 'struct clk' type clock to 'struct clksrc_clk'
type clock for the PCLK PSYS clock.
This patch modifies the following.
1. Removes definitions and usage of 'clk_p66' clock.
2. Adds 'clk_pclk_psys' clock which is of type 'struct clksrc_clk'.
3. Replaces all usage of clk_p66 with clk_pclk_psys clock.
4. Adds clk_pclk_psys into list of clocks to be registered.
5. Removes the sys_clks array since it is no longer required.
Also the registration of clocks in sys_clks is also removed.
6. Remove the 'GET_DIV' as it is no longer required.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:48 +0000 (09:38 +0900)]
ARM: S5PV210: Remove usage of clk_p83 and add clk_pclk_dsys clock\
The clk_p83 clock, which is the PCLK clock for DSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a clock divider). So this
patch replaces the 'struct clk' type clock to 'struct clksrc_clk'
type clock for the PCLK DSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_p83' clock.
2. Adds 'clk_pclk_dsys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_p83 with clk_pclk_dsys clock.
4. Adds clk_pclk_dsys into list of clocks to be registered.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:44 +0000 (09:38 +0900)]
ARM: S5PV210: Fix clk_get_rate issue with the clk_h100 clock
The clk_h100 clock represents the IMEM clock for the MSYS domain.
This clock rate of this clock is always half of the hclk_msys clock.
There is an issue when getting the clock rate of the clk_h100 clock
(clock get_rate hclk_h100 always returns clock rate that is equal to
the hclk_msys clock rate).
This patch modifies the following.
1. Moves the definition of the clk_h100 clock into the 'init_clocks'
list with the appropriate parent, ctrlbit, enable and ops fields.
2. The name of the clock is changed from 'clk_h100' to 'hclk_imem'
to represent more clearly that is represents the IMEM clock in
the MSYS domain.
3. The function to get the clock rate of the hclk_imem clock is added.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:42 +0000 (09:38 +0900)]
ARM: S5PV210: Remove usage of clk_p100 and add clk_pclk_msys clock
The clk_p100 clock, which is the PCLK clock for MSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the PCLK MSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_p100' clock.
2. Adds 'clk_pclk_msys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_p100 with clk_pclk_msys clock.
4. Adds clk_pclk_msys into list of clocks to be registered.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:40 +0000 (09:38 +0900)]
ARM: S5PV210: Remove usage of clk_h133 and add clk_hclk_psys clock
The clk_h133 clock, which is the HCLK clock for PSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the HCLK PSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_h133' clock.
2. Adds 'clk_hclk_psys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_h133 with clk_hclk_psys clock.
4. Adds clk_hclk_psys into list of clocks to be registered.
5. Removes the clock rate calculation of hclk133 and replaces
it with code that derives the HCLK PSYS clock rate from
the clk_hclk_psys clock.
6. Modify printing of the system clock rates.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:37 +0000 (09:38 +0900)]
ARM: S5PV210: Remove usage of clk_h166 and add clk_hclk_dsys clock
The clk_h166 clock, which is the HCLK clock for DSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the HCLK DSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_h166' clock.
2. Adds 'clk_sclk_a2m' clock which is one of possible parent clock
sources for the DSYS HCLK clock.
3. Adds 'clk_hclk_dsys' clock which is of type 'struct clksrc_clk'.
4. Replace all usage of clk_h166 with clk_hclk_dsys clock.
5. Adds clk_sclk_a2m and clk_hclk_dsys into list of clocks to
be registered.
6. Removes the clock rate calculation of hclk166 and replaces
it with code that derives the HCLK DSYS clock rate from
the clk_hclk_dsys clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:34 +0000 (09:38 +0900)]
ARM: S5PV210: Remove usage of clk_h200 clock and add clk_hclk_msys clock
The clk_h200 represents the HCLK for the MSYS domain. This clock
is of type 'struct clk' but on V210, it is more suitable to be of
type 'struct clksrc_clk' (since it is a divided version of the
armclk). The replacement clock is renamed as clk_hclk_msys to
indicate that it represents the HCLK for MSYS domain.
This patch modifies the following.
1. Removes the usage of the clk_h200 clock.
2. Adds the new clock 'clk_hclk_msys'.
3. Adds clk_hclk_msys to the list of sysclks to be registered.
4. Modifies the hclk_msys clock rate calculation procedure to
be based on the new clk_hclk_msys clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:31 +0000 (09:38 +0900)]
ARM: S5PV210: Add armclk of clksrc_clk clock type
This patch modifies the following.
1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type.
2. Adds arm clock to the list of system clocks 'sysclks' for
registering it along with other system clocks.
3. Modifies the armclk clock rate calculation procedure to be
based on the new clk_armclk clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:28 +0000 (09:38 +0900)]
ARM: S5PV210: Rearrange assignment of clock for fout apll/mpll/epll clocks
The assignment of clock rates for fout apll/mpll/epll is moved further
up in the s5pv210_setup_clocks function because the subsequent patches
require the clock rate of fout clocks to be setup.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:12 +0000 (09:38 +0900)]
ARM: S5PV210: Register apll/mpll/epll clksrc_clk clocks
This patch modifies the following.
1. Registers the mout_apll clksrc_clk clock.
2. The mout_mpll and mout_epll clocks were registered as 'struct clk'
types and then their parents were setup using the s3c_set_clksrc
function. This patch reduces the two steps into one by registering
the mout_mpll and mout_epll clocks using the s3c_register_clksrc
function.
3. As per point 2 above, the init_parents array is no longer required.
So the mout clocks are now put together in a new array named 'sysclks'.
The sysclks array will list the system level clocks and more
clocks will be added to it in the subsequent patches.
4. The clks array is left empty because of the movement of mpll and epll
clocks into the sysclks array. It is not deleted since subsequent
patches will add clocks into this array.
Signed-off-by: Thomas Abraham <thomas.ab <at> samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim <at> samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 17 May 2010 00:38:01 +0000 (09:38 +0900)]
ARM: S5PV210: Rearrange the system clock definitions
The system clock definitions are currently defined below the
peripheral clock definitions in the V210 clock code. For the V210
clock updates that follow this patch, it is required that the
system clock definitions such as the mout_apll and mout_mpll be
defined prior to the device clock definitions. This patch
re-arranges the system clock defintions for the clock updates that
follow this patch.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 9 Mar 2010 06:10:34 +0000 (15:10 +0900)]
ARM: S3C6410: Declare IISv4 audio-bus clock
Declare 'audio-bus' clock for IISv4 controller of S3C6410.
Even though the name is same as that for IISv3, the id is
set to -1(just one instance of the controller is available)
which helps always fetch the correct clock.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 9 Mar 2010 06:10:33 +0000 (15:10 +0900)]
ARM: S3C6410: Declare possible sources of audio-bus2
Declare possible sources of CLKAUDIO[2]/audio-bus for IISv4 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 9 Mar 2010 06:10:32 +0000 (15:10 +0900)]
ARM: S3C6410: Declare IISCDCLK_V4 Clock
Declare the source of clock provided at Xi2sCDCLK2 pin for IISv4 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 9 Mar 2010 06:10:31 +0000 (15:10 +0900)]
ARM: S3C6410: Define clk_src2 register
Define S3C6410 specific register - CLK_SRC2
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:54 +0000 (09:27 +0900)]
ARM: S5P6440: Add clocks of type 'struct clksrc_clk'.
This patch adds the following.
1. Add new definitions of clock of type 'struct clksrc_clk'.
2. Add gate control function for GATE_SCLK1 which is required
for new clock additions.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:49 +0000 (09:27 +0900)]
ARM: S5P6440: Rename clkset_mmc_spi to clkset_group1
The clock source options avaialable in the clkset_mmc_spi are
applicable to clocks such as sclk_post, sclk_dispcon and
sclk_fimgvg. So this set is renamed as clkset_group1 to indicate
that it can be used as clock sources for other clocks and not
just for sclk_spi and sclk_mmc clocks.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:47 +0000 (09:27 +0900)]
ARM: S5P6440: Add clocks of type 'struct clk'.
Add definitions of clocks of type 'struct clk'.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:29 +0000 (09:27 +0900)]
ARM: S5P6440: Remove usage of clk_p_low and add clk_pclk_low clock
The pclk_low clock is of type 'struct clk' whereas on S5P6440,
the pclk_low clock is more suitable to be of type 'struct clksrc_clk'
(since pclk_low clock is a divided clock of hclk_low clock).
This patch modifies the following.
1. Removes the definition and usage of clk_p_clk clock.
2. Adds the clk_pclk_low clock of type 'struct clksrc_clk' clock.
3. Adds clk_pclk_low to the list of system clocks.
4. The clock rate of pclk_low is derived from the clk_pclk_low clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:17 +0000 (09:27 +0900)]
ARM: S5P6440: Remove usage of clk_h_low and add clk_hclk_low clock
The clk_h_low clock is of type 'struct clk' whereas on S5P6440,
the hclk_low clock is more suitable to be of type 'struct clksrc_clk'
(since hclk_low clock is derived from a choice of clock sources and
then divided by a divisor).
This patch modifies the following.
1. Removes the definition and usage of clk_h_clk clock.
2. Adds the clk_hclk_low clock of type 'struct clksrc_clk' clock.
3. Adds clk_hclk_low to the list of system clocks.
4. The clock rate of hclk_low is derived from the clk_hclk_low clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:13 +0000 (09:27 +0900)]
ARM: S5P6440: Remove usage of clk_p and add clk_pclk clock
The clk_p clock is of type 'struct clk' whereas on S5P6440,
the pclk is more suitable to be of type 'struct clksrc_clk'
(since pclk clock is divided version of hclk).
This patch modifies the following.
1. Adds the 'clk_pclk' clock which is of type 'struct clksrc_clk'.
2. Adds clk_pclk into the list of sysclks.
3. The clock rate 'pclk' is modified to be derived from clk_pclk.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:09 +0000 (09:27 +0900)]
ARM: S5P6440: Remove usage of clk_h and add clk_hclk clock
The clk_h clock is of type 'struct clk' whereas on S5P6440,
the hclk is more suitable to be of type 'struct clksrc_clk'
(since hclk clock is divided version of armclk)
This patch modifies the following.
1. Adds the 'clk_hclk' clock which is of type 'struct clksrc_clk'.
2. Removes all references to the clk_h clock.
3. Addes clk_hclk into the list of sysclks.
4. The clock rate 'hclk' is modified to be derived from clk_hclk.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:27:04 +0000 (09:27 +0900)]
ARM: S5P6440: Remove usage of clk_arm and add clk_armclk clock
The clk_arm clock is of type 'struct clk' whereas on S5P6440,
the arm clock is more suitable to be of type 'struct clksrc_clk'
(since arm clock is divided version of apll clock).
This patch modifies the following.
1. Removes the usage of clk_arm clock (defined in plat-s5p) and
defines the new clock 'clk_armclk' of type 'struct clksrc_clk'.
2. Rearranges the assignment of clock rate for the fout_a/m/epll
clocks. This will help in calculating the clock rate of fclk
from clk_armclk clock and setup the clock rate for fout_m/epll
for subsequent patches which depend on it.
3. Modifies the clock rate calculation of fclk to be based on
the newly added clk_armclk clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:26:58 +0000 (09:26 +0900)]
ARM: S5P6440: Change dout_mpll clock type to clksrc_clk clock type.
This patch modifies the following.
1. Modifies the dout_mpll clock type as clksrc_clk clock type.
This modification allows the use of common clock code in
managing the dout_mpll clock (which otherwise would need
custom defined functions such as s5p6440_clk_doutmpll_get_rate).
2. s5p6440_clk_doutmpll_get_rate function is removed as it is
no longer needed.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Thu, 13 May 2010 00:26:49 +0000 (09:26 +0900)]
ARM: S5P6440: Register apll/mpll/epll mout clocks.
This patch modifies the following.
1. Registers the mout_apll clksrc_clk clock.
2. The mout_mpll and mout_epll were registered as 'struct clk'
types and then their parents were setup using the s3c_set_clksrc
function. This patch reduces the two steps into one by registering
the mout_mpll and mout_epll clocks using the s3c_register_clksrc
function.
3. As per point 2 above, the init_parents array is no longer required.
So the mout clocks are now put together in a new array named 'sysclks'.
The sysclks array will list the system level clocks and more
clocks will be added to it in the subsequent patches.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Tue, 4 May 2010 11:12:32 +0000 (13:12 +0200)]
ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung
Move HWMON platform definition from plat-s3c24xx to plat-samsung
and adjust mach-bast to use the new s3c_hwmon_set_platdata().
This allows usage of dev-hwmon by other Samsung SoCs.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kukjin Kim [Tue, 11 May 2010 00:56:37 +0000 (09:56 +0900)]
ARM: SAMSUNG: Remove static of S5P SoCs sysclass
This patch removes static of s5p6440_sysclass, s5p6442_sysclass,
and s5pv210_sysclass for defintion as extern.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 7 May 2010 00:24:05 +0000 (09:24 +0900)]
ARM: SAMSUNG: Remove old email address for ben-linux@fluff.org
The address ben@fluff.org is old, ben-linux@fluff.org has been in use
for a long time, and we should fixup all the occasions of the older
address to avoid confusion.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Tue, 11 May 2010 06:55:11 +0000 (09:55 +0300)]
ARM: RX1950: configure GPG13-15 as input before suspend
According to datasheet GPG13-15 must be configured as input in NAND
boot mode, otherwise device will not be able to wake up
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Tue, 11 May 2010 06:55:10 +0000 (09:55 +0300)]
ARM: RX1950: Add suspend/resume support for RX1950
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Tue, 11 May 2010 06:55:09 +0000 (09:55 +0300)]
ARM: S3C24XX: Locate kernel at 0x30108000 if PM_H1940 is enabled
If PM_H1940 is enabled, kernel _must_ be located upper then 0x30008000,
because this area (0x30000000-0x30100000) can be used by bootloader. If
kernel is located at 0x30008000, bootloader will corrupt kernel's code during
resume.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Tue, 11 May 2010 06:55:07 +0000 (09:55 +0300)]
ARM: S3C2440: Add HP iPAQ RX1950 machine support
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Denis Grigoriev <dgreenday@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 6 May 2010 06:42:23 +0000 (15:42 +0900)]
ARM: SAMSUNG: Add spinlock locking to GPIO banks
Add locking to each GPIO bank to allow for SMP capable code
to use the gpiolib functions. See the gpio-core.h header file
for more information.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Mon, 19 Apr 2010 11:05:08 +0000 (20:05 +0900)]
ARM: S5P: Add USB External Crystal clock definition
Add USB external crystal clock definition Xusbxti to common S5P clock code.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jongpill Lee [Fri, 19 Mar 2010 06:33:31 +0000 (15:33 +0900)]
ARM: S5PV210: Bug fix on PWM Timer
This patch fixes return value in below functions
- pwm_cfg_src_is_tclk
- tcfg_to_divisor
- pwm_tdiv_has_div1
- pwm_tdiv_div_bits
And this patch changes Copyright ordering.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jongpill Lee [Fri, 19 Mar 2010 06:33:22 +0000 (15:33 +0900)]
ARM: S5P6442: Bug fix on PWM Timer
This patch fixes return value in below functions
- pwm_cfg_src_is_tclk
- tcfg_to_divisor
- pwm_tdiv_has_div1
- pwm_tdiv_div_bits
And this patch changes Copyright ordering.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jongpill Lee [Fri, 19 Mar 2010 06:33:12 +0000 (15:33 +0900)]
ARM: S5P6440: Bug fix on PWM Timer
This patch fixes return value in below functions
- pwm_cfg_src_is_tclk
- tcfg_to_divisor
- pwm_tdiv_has_div1
- pwm_tdiv_div_bits
And this patch changes Copyright ordering, and addes 'based on' information.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 07:32:26 +0000 (16:32 +0900)]
ARM: SAMSUNG: Update S3C2416 entry with S3C2450
These devices are so similar that they share the same SoC
ID code, so note this.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:48:02 +0000 (19:48 +0900)]
ARM: S3C2413: Update GPIO pull-up support
Ensure the right get/set pull code is selected and assigned to the GPIO
core.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 3 May 2010 07:44:35 +0000 (16:44 +0900)]
ARM: S3C2416: Use s3c2440 style i2c controller
The s3c2416 i2c controllers are compatible with the s3c2440 style i2c
block, so change the device name appropriately.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>y
Ben Dooks [Fri, 30 Apr 2010 01:59:42 +0000 (10:59 +0900)]
ARM: S3C2416: Add support for OHCI on SMDK2416
Add device definition and ensure that the host port is powered up
at start time. Full power control can be added at a later date.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 29 Apr 2010 09:59:43 +0000 (18:59 +0900)]
ARM: S3C2416: Add support for second HSMMC channel
Add support for the second HSMMC channel on the S3C2416.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 02:12:58 +0000 (11:12 +0900)]
ARM: S3C2416: Add basic clock support
Add basic clock support for the PLLs, HSMMC channels and
PWM clocks. This is enough to get a basic system up and
running.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 28 Apr 2010 09:03:57 +0000 (18:03 +0900)]
ARM: S3C2443: Move parts of the clock code to common clock file
To share code with some of the newer parts such as the S3C2416, move
parts of arch/arm/mach-s3c2443/clock.c to a common file called
arch/arm/plat-s3c24xx/s3c2443-clock.c.
Update the build configuration to deal with this new file.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 28 Apr 2010 09:00:07 +0000 (18:00 +0900)]
ARM: S3C24XX: Identify S3C2416 if S3C2412/S3C2413 built in
Extend the ARMv5 ID code to deal with S3C2416 being built with
S3C2412/S3C2413 enabled, as these have their ID registers in a
different place.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
projects / kernel / kernel-generic.git / log